Cisco Application Policy Infrastructure Controller Release Notes, Release 4.1(2)

December 9, 2022

In the Open Bugs section, added bug CSCvw33061.

August 1, 2022

In the Miscellaneous Compatibility Information section, added:

■        4.2(2a) CIMC HUU ISO (recommended) for UCS C220/C240 M5 (APIC-L3/M3)

■        4.1(2k) CIMC HUU ISO (recommended) for UCS C220/C240 M4 (APIC-L2/M2)

March 21, 2022

In the Miscellaneous Compatibility Information section, added:

■        4.1(3f) CIMC HUU ISO (recommended) for UCS C220/C240 M5 (APIC-L3/M3)

February 23, 2022

In the Miscellaneous Compatibility Information section, added:

■        4.1(2g) CIMC HUU ISO (recommended) for UCS C220/C240 M4 (APIC-L2/M2)

November 2, 2021

In the Miscellaneous Compatibility Information section, added:

■        4.1(3d) CIMC HUU ISO (recommended) for UCS C220/C240 M5 (APIC-L3/M3)

August 4, 2021

In the Open Issues section, added bugs CSCvy30453 and CSCvy44940.

July 26, 2021

In the Miscellaneous Compatibility Information section, the CIMC 4.1(3c) release is now recommended for UCS C220/C240 M5 (APIC-L3/M3).

March 11, 2021

In the Miscellaneous Compatibility Information section, for CIMC HUU ISO, added:

■        4.1(3b) CIMC HUU ISO (recommended) for UCS C220/C240 M5 (APIC-L3/M3)

Changed:

■        4.1(2b) CIMC HUU ISO (recommended) for UCS C220/C240 M4 (APIC-L2/M2) and M5 (APIC-L3/M3)

To:

■        4.1(2b) CIMC HUU ISO (recommended) for UCS C220/C240 M4 (APIC-L2/M2

February 9, 2021

In the Open Bugs section, added bug CSCvt07565.

February 3, 2021

In the Miscellaneous Compatibility Information section, for CIMC HUU ISO, added:

■        4.1(2b) CIMC HUU ISO (recommended) for UCS C220/C240 M4 (APIC-L2/M2) and M5 (APIC-L3/M3)

September 29, 2020

In the Miscellaneous Compatibility Information section, specified that the 4.1(1f) CIMC release is deferred. The recommended release is now 4.1(1g).

September 16, 2020

In the Known Behaviors section, added the bullet that begins with:

Beginning in Cisco APIC release 4.1(1), the IP SLA monitor policy validates the IP SLA port value.

April 17, 2020

In the Miscellaneous Compatibility Information section, updated the CIMC HUU ISO information to include the 4.1(1c) and 4.1(1d) releases.

March 6, 2020

In the Miscellaneous Compatibility Information section, updated the CIMC HUU ISO information for the 4.0(2g) and 4.0(4e) CIMC releases.

February 7, 2020

4.1(2x): Release 4.1(2x) became available; there are no changes to this document for this release. See the Cisco Nexus 9000 ACI-Mode Switches Release Notes, Release 14.1(2) for the changes in this release.

January 30, 2020

4.1(2w): Release 4.1(2w) became available. Added the resolved bugs for this release.

November 25, 2019

4.1(2g): In the Known Behaviors section, added bug CSCvs19322.

October 30, 2019

4.1(2u): Release 4.1(2u) became available; there are no changes to this document for this release. See the Cisco Nexus 9000 ACI-Mode Switches Release Notes, Release 14.1(2) for the changes in this release.

October 16, 2019

4.1(2s): Release 4.1(2s) became available; there are no changes to this document for this release. See the Cisco Nexus 9000 ACI-Mode Switches Release Notes, Release 14.1(2) for the changes in this release.

October 8, 2019

In the Miscellaneous Compatibility Information section, updated the supported 4.0(4), 4.0(2), and 3.0(4) CIMC releases to:

—      4.0(4e) CIMC HUU ISO for UCS C220 M5 (APIC-L3/M3)

—      4.0(2g) CIMC HUU ISO (recommended) for UCS C220/C240 M4 (APIC-L2/M2)

—      3.0(4l) CIMC HUU ISO (recommended) for UCS C220/C240 M3 (APIC-L1/M1)

October 4, 2019

In the Miscellaneous Guidelines section, added the following bullet:

■        When you create an access port selector in a leaf interface rofile, the fexId property is configured with a default value of 101 even though a FEX is not connected and the interface is not a FEX interface. The fexId property is only used when the port selector is associated with an infraFexBndlGrp managed object.

October 3, 2019

In the Miscellaneous Guidelines section, added the bullet that begins as follows:

■        Fabric connectivity ports can operate at 10G or 25G speeds (depending on the model of the APIC server) when connected to leaf switch host interfaces.

September 17, 2019

4.1(2g): In the Open Bugs section, added bug CSCuu17314, CSCve84297, and CSCvg70246.

September 11, 2019

4.1(2g): In the Resolved Bugs section, added bug CSCvp64857.

September 10, 2019

In the Known Behaviors secton, changed the bullet regarding the software check to validate Ethernet transceivers to specify that this check only exists in the 4.1(1) releases and the 4.1(2g) release. This check was removed in 4.1(2m) and all later releases.

In the Known Behaviors section, added the following bullet:

■        When there are silent hosts across sites, ARP glean messages might not be forwarded to remote sites if a 1st generation ToR switch (switch models without -EX or -FX in the name) happens to be in the transit path and the VRF is deployed on that ToR switch, the switch does not forward the ARP glean packet back into the fabric to reach the remote site. This issue is specific to 1st generation transit ToR switches and does not affect 2nd generation ToR switches (switch models with -EX or -FX in the name). This issue breaks the capability of discovering silent hosts.

August 31, 2019

4.1(2o): Release 4.1(2o) became available; there are no changes to this document for this release. See the Cisco Nexus 9000 ACI-Mode Switches Release Notes, Release 14.1(2) for the changes in this release.

August 12, 2019

4.1(2m): Release 4.1(2m) became available. Added the resolved bugs for this release.

August 5, 2019

4.1(2g): In the Open Bugs section, added bug CSCvp25660.

July 22, 2019

4.1(2g): In the GUI Guidelines section, added the following bullet:

■        When using the APIC GUI to configure an integration group, you cannot specify the connection URL (connUrl). You can only specify the connection URL by using the REST API.

In the CLI Guidelines section, added the following bullet:

■        When using the APIC CLI to configure an integration group, you cannot specify the connection URL (connUrl). You can only specify the connection URL by using the REST API.

In the Open Bugs section, added bug CSCvq39764.

July 17, 2019

4.1(2g): In the Open Bugs section, added bug CSCvq39922.

July 11, 2019

4.1(2g): In the Open Bugs section, added bug CSCvj89771.

July 9, 2019

In the New Software Features section, added guidelines and restrictions to the Remote leaf switches with Multi-Site Orchestrator feature.

June 27, 2019

In the Changes in Behavior section, added mention that APIC-X is now deprecated.

June 13, 2019

4.1(2g): In the Known Behavior section, added a known behavior.

June 11, 2019

4.1(2g): Release 4.1(2g) became available.

Direct traffic forwarding between remote leaf switches in different remote locations

You can enable direct traffic forwarding between remote leaf switches in different remote locations. This functionality offers redundancy and high availability in the connections between the remote locations.

For more information, see the Cisco APIC Layer 3 Networking Configuration Guide, Release 4.1(x).

None.

Support for Intersight Device Connector

Intersight Device Connector provides a secure way for connected devices to send information and receive control instructions from the Cisco Intersight portal using a secure Internet connection.

For more information, see the Cisco Cisco APIC and Intersight Device Connector.

None.

Policy-based redirect bypass action

You can now specify the bypass action option when configuring Layer 4 to Layer 7 policy-based redirect. With this option, in a multi-node policy-based redirect service graph, when one node crosses the low threshold, traffic is still able to proceed through the rest of the service chain that is either up or cannot be bypassed.

For more information, see the Cisco APIC Layer 4 to Layer 7 Services Deployment Guide, Release 4.1(x).

This feature is supported only on switch models with EX, FX, or FX2 at the end of the switch name.

This feature is not needed on a one-node service graph. If bypass is configured in such a case, the forwarding behavior is the same as the permit action.

L3Out EPGs and regular EPGs can be consumer or provider EPGs.

A service node that has NAT enabled cannot be bypassed, as that will break the traffic flow.

The bypass action option is not supported in the following cases:

■        Layer 4 to Layer 7 service devices in one-arm mode

■        Layer 1/Layer 2 PBR nodes

■        Remote leaf switches

Do not use the same PBR policy in more than one service graph if the bypass action is enabled. APIC will reject configurations if the same PBR policy with bypass action is used in multiple service graphs. To avoid this, configure different PBR policies that use the same PBR destination IP address, MAC address, and Health Group.

Policy-based redirect with a Layer 3 Outside

A uni-directional policy-based redirect with a Layer 3 Outside is now supported.

For more information, see the Cisco APIC Layer 4 to Layer 7 Services Deployment Guide, Release 4.1(x).

Use a specific L3Out EPG subnet if there are other L3Out EPGs in the same VRF instance; otherwise, you might use the other L3Outs by mistake.

Ensure that IP address translation occurs on the service node. If the SNAT is not properly done on the firewall, it could be classified to the L3Out internal and could cause a loop.

An L3Out is supported only on the provider side of the last node.

Remote leaf switches with Multi-Site Orchestrator

The Multi-Site Orchestrator now supports APIC sites with remote leaf switches.

For additional information, see the "Infrastructure Management" chapter in the Cisco ACI Multi-Site Configuration Guide.

It is not supported to stretch a bridge domain (BD) between Remote Leaf (RL) nodes associated to a given site (APIC domain) and leaf nodes part of a separate site of a Multi-Site deployment (in both scenarios where those leaf nodes are local or remote) and a fault is generated on APIC to highlight this restriction. This applies independently from the fact that BUM flooding is enabled or disabled when configuring the stretched BD on the Multi-Site Orchestrator (MSO).

However, a BD can always be stretched (with BUM flooding enabled or disabled) between Remote Leaf nodes and Local Leaf nodes belonging to the same site (APIC domain).

Silent roll package upgrade

Silent roll package upgrade (SR upgrade) enables you manually to perform an internal package upgrade for ACI switch hardware SDK, drivers, and so on, without upgrading the entire ACI switch software OS.

For more information, see the Cisco APIC Installation, Upgrade, and Downgrade Guide.

This feature supports the following switches:

■        N9K-C93216TC-FX2

■        N9K-C93360YC-FX2

Upgrade Group field enhancement

You can now use the Upgrade Group field to select whether you are using an existing or new upgrade group when you are upgrading the leaf and spine switch software.

For more information, see the Cisco APIC Installation, Upgrade, and Downgrade Guide.

None.

CSCvv18827

The data in the Cisco APIC database may get deleted during an upgrade from a 3.0 or 3.1 release to a 4.0 or 4.1 release if the target release is rolled back to current running release within 2 minutes after the upgrade was started. The upgrade will continue anyway, but the Cisco APIC will lose all data in the database and a user with admin credentials cannot log in. Only the rescue-user/admin can log in.  All shards for a process show as unexpected, and the database files are removed. The last working pre-upgrade database files are copied to the purgatory directory.

4.1(2x) and later

CSCvv21442

The Cisco APIC does not allow an upgrade to be cancelled. Rolling back the target version after an upgrade is started does not stop the upgrade and may cause Cisco APIC database loss. This enhancement is filed to block a Cisco APIC target version change unless the following conditions are met:
1. All Cisco APICs are online and the cluster is fully fit.
2. The upgrade job (maintUpgJob) for all Cisco APICs are completed.
3. The Installer.py process is not running on any of the Cisco APICs.

4.1(2x) and later

CSCvv41784

EIGRP summary routes are not advertised from one of the many interfaces under same interface profile.

4.1(2x) and later

CSCvs40434

When performing a network-centric migration to Cisco ACI, the surrounding network usually can handle only 1 EPG per bridge domain. If the surrounding network is not ready, there could be loop in the network.

4.1(2u)

CSCvr82304

vPod deployment fails in the VMware vCenter plugin with the following error:

"Deploy ACI Virtual Pod - An Error Occured"

In the logs (/var/log/vmware/vsphere-client/logs/vsphere_client_virgo.log), the following error can be seen:

The following PortGroup could not be resolved

4.1(2o) and later

CSCvs03648

Cisco ACI UCSM integration does not work as expected. The Cisco APIC cannot discover a loose node UCS Fabric interconnect 6400 series when it is connected to the Cisco ACI fabric with a 100G interface.

4.1(2o) and later

CSCvv28749

A bridge domain subnet is explicitly marked as public. The same EPG subnet has the shared flag enabled and has an implicit private scope. The private scope should take precedence over the public scope and should not get advertised. However, the bridge domain subnet does get advertised through the L3Out.

4.1(2o) and later

CSCvv30303

The configuration of a bridge domain subnet scope as "public" and an EPG scope as "private" should not be allowed.

4.1(2o) and later

CSCvj14053

The health status of DHCP was not updated after a leaf switch upgrade for some of the leaf switches.

4.1(2m) and later

CSCvk04072

There is no record of who acknowledged a fault in the Cisco APIC, nor when the acknowledgement occurred.

4.1(2m) and later

CSCvr85945

There should be a description field in the subnet IP address tables.

4.1(2m) and later

CSCvs04899

When you run the 'show vpc map' command in the APIC CLI, it only prints the column headers, but none of the vPC information. If you go to the leaf switch CLI and run the 'show vpc extended' command, it will show the vPCs there.

4.1(2m) and later

CSCvs13857

L3Out encapsulated routed interfaces and routed interfaces do not have any monitoring policy attached to them. As a result, there is no option to change the threshold values of the faults that occur due to these interfaces.

4.1(2m) and later

CSCvs29281

An SNMP v3 trap is sent 2 minutes after a PSU is removed from the Cisco APIC, and a core file for the eventmgr is generated.

4.1(2m) and later

CSCvs49411

Special characters are not allowed in the GUI for the SNMP community string, but you can still post a configuration that has special characters in the string by using the REST API.

4.1(2m) and later

CSCvt91540

- After decommissioning a fabric node, it is not displayed in the maintenance group configuration anymore.

- Due to the lingering configuration pointing to the decommissioned node, F1300 gets raised with the description:

"A Fabric Node Group (fabricNodeGrp) configuration was not deployed on the fabric node <#> because: Node Not Registered for Node Group Policies"

- The dn mentioned in the fault will point to a maintenance group (maintgrp).

4.1(2m) and later

CSCuu17314

CDP is not enabled on the management interfaces for the leaf switches and spine switches.

4.1(2g) and later

CSCvd43548

The stats for a given leaf switch rule cannot be viewed if a rule is double-clicked.

4.1(2g) and later

CSCvd66359

The Port ID LLDP Neighbors panel displays the port ID when the interface does not have a description. Example:  Ethernet 1/5, but if the interface has description, the Port ID property shows the Interface description instead of the port ID.

4.1(2g) and later

CSCve84297

A service cannot be reached by using the APIC out-of-band management that exists within the 172.17.0.0/16 subnet.

4.1(2g) and later

CSCvf70362

This enhancement is to change the name of "Limit IP Learning To Subnet" under the bridge domains to be more self-explanatory.

Original :

    Limit IP Learning To Subnet: [check box]

Suggestion :

    Limit Local IP Learning To BD/EPG Subnet(s): [check box]

4.1(2g) and later

CSCvf70411

A route will be advertised, but will not contain the tag value that is set from the VRF route tag policy.

4.1(2g) and later

CSCvg00627

A tenant's flows/packets information cannot be exported.

4.1(2g) and later

CSCvg35344

Requesting an enhancement to allow exporting a contract by right clicking the contract itself and choosing "Export Contract" from the right click context menu. The current implementation of needing to right click the Contract folder hierarchy to export a contract is not intuitive.

4.1(2g) and later

CSCvg70246

When configuring an L3Out under a user tenant that is associated with a VRF instance that is under the common tenant, a customized BGP timer policy that is attached to the VRF instance is not applied to the L3Out (BGP peer)  in the user tenant.

4.1(2g) and later

CSCvg81020

For strict security requirements, customers require custom certificates that have RSA key lengths of 3072 and 4096.

4.1(2g) and later

CSCvh52046

This is an enhancement to allow for text-based banners for the Cisco APIC GUI login screen.

4.1(2g) and later

CSCvh54578

For a client (browser or ssh client) that is using IPv6, the Cisco APIC aaaSessionLR audit log shows "0.0.0.0" or some bogus value.

4.1(2g) and later

CSCvh59843

Enabling Multicast under the VRF on one or more bridge domains is difficult due to how the drop-down menu is designed. This is an enhancement request to make the drop-down menu searchable.

4.1(2g) and later

CSCvi20535

When a VRF table is configured to receive leaked external routes from multiple VRF tables, the Shared Route Control scope to specify the external routes to leak will be applied to all VRF tables. This results in an unintended external route leaking. This is an enhancement to ensure the Shared Route Control scope in each VRF table should be used to leak external routes only from the given VRF table.

4.1(2g) and later

CSCvi41092

The APIC log files are extremely large, which takes a considerable amount of time to upload, especially for users with slow internet connectivity.

4.1(2g) and later

CSCvi80543

This is an enhancement that allows failover ordering, categorizing uplinks as active or standby, and categorizing unused uplinks for each EPG in VMware domains from the APIC.

4.1(2g) and later

CSCvi82903

When authenticating with the Cisco APIC using ISE (TACACS), all logins over 31 characters fail.

4.1(2g) and later

CSCvj56726

The connectivity filter configuration of an access policy group is deprecated and should be removed from GUI.

4.1(2g) and later

CSCvj89771

The Virtual Machine Manager (vmmmgr) process crashes and generates a core file.

4.1(2g) and later

CSCvk18014

The action named 'Launch SSH' is disabled when a user with read-only access logs into the Cisco APIC.

4.1(2g) and later

CSCvm32345

A port group cannot be renamed. This is an enhancement request to enable the renaming of port groups.

4.1(2g) and later

CSCvm42914

This is an enhancement request to add policy group information to the properties page of physical interfaces.

4.1(2g) and later

CSCvm56946

Support for local user (admin) maximum tries and login delay configuration.

4.1(2g) and later

CSCvm63668

A single user can send queries to overload the API gateway.

4.1(2g) and later

CSCvm64933

The Cisco APIC setup script will not accept an ID outside of the range of 1 through 12, and the Cisco APIC cannot be added to that pod. This issue will be seen in a multi-pod setup when trying add a Cisco APIC to a pod ID that is not between 1 through 12.

4.1(2g) and later

CSCvm89559

The svc_ifc_policye process consumes 100% of the CPU cycles. The following messages are observed in svc_ifc_policymgr.bin.log:

8816||18-10-12 11:04:19.101||route_control||ERROR||co=doer:255:127:0xff00000000c42ad2:11||Route entry order exceeded max for st10960-2424833-any-2293761-33141-shared-svc-int Order:18846Max:17801||

../dme/svc/policyelem/src/gen/ifc/beh/imp/./rtctrl/RouteMapUtils.cc||239:q

4.1(2g) and later

CSCvn00576

An SHA2 CSR for the ACI HTTPS certificate cannot be configured in the APIC GUI.

4.1(2g) and later

CSCvn12839

Error "mac.add.ress not a valid MAC or IP address or VM name" is seen when searching the EP Tracker.

4.1(2g) and later

CSCvn99797

When 3 DNS providers are added, F3546 faults are raised for:

Policy Configuration for DNS Profile: default failed due to : provider-limit-exceeded.

To debug/rectify: DNS Provider count cannot exceed 2. The first 2 DNS providers you provide will be used for name resolution. The rest of the nameservers will be not be used for name resolution.

4.1(2g) and later

CSCvo24284

Fault delegates are raised on the Cisco APIC, but the original fault instance is already gone because the affected node has been removed from the fabric.

4.1(2g) and later

CSCvo42420

After changing the VRF instance association of a shared-services bridge domain, a shared-services route is still present in the old VRF instance.

4.1(2g) and later

CSCvp25660

After upgrading APICs from a pre-4.0 version to 4.0 or newer, the leaf switches will not upgrade, or the switches will upgrade and then automatically downgrade back to the previous version.

4.1(2g) and later

CSCvp26694

A leaf switch gets upgraded when a previously-configured maintenance policy is triggered.

4.1(2g) and later

CSCvp38968

A service graph with a Layer 1 device goes to the "failed" state when an inter-tenant contract is used. The error in the graph will be "id-allocation-failure".

4.1(2g) and later

CSCvp43877

When using the "Clone" option for a policy group or interface profile and an existing name is used, the cloned policy overwrites the old policy. A warning should be displayed regarding the policy name that already exists.

4.1(2g) and later

CSCvp44764

With the PBR feature, the svcredirDestmon object in the leaf switch is incorrectly removed. As a result, a service device cannot be tracked and the switch incorrectly reports the status to APIC that the service device is down.

When this happens, the switch attempts to take corrective action based on the user configuration (the threshold action configuration). The switch attempts to skip the service node if thresholdDownAction is set to "bypass," send the traffic directly to the destination if thresholdDownAction is set to "permit," or drop the traffic if thresholdDownAction is set to "deny".

4.1(2g) and later

CSCvp51422

BD stretch should not be supported in MSC configuration when cross site boundary with Remote Leaf is involved.

4.1(2g) and later

CSCvp56705

If the COOP process stops, then an alert is generated in the APIC and any later alerts do not get cleared after the process restarts.

4.1(2g) and later

CSCvp57131

After a VC was disconnected and reconnected to the APIC, operational faults (for example, discovery mismatching between APIC and VC) were cleared, even the if faulty condition still existed.

4.1(2g) and later

CSCvp62048

New port groups in VMware vCenter may be delayed when pushed from the Cisco APIC.

4.1(2g) and later

CSCvp68296

The APIC process information from the APIC GUI may have the wrong values.

4.1(2g) and later

CSCvp72283

An APIC running the 3.0(1k) release sometimes enters the "Data Layer Partially Diverged" state. The acidiag rvread command shows the following output for the service 10 (observer):

Non optimal leader for shards :10:1,10:3,10:4,10:6,10:7,10:9,10:10,10:12,10:13,10:15,10:16,10:18,10:19,10:21,10:22,10:24,10:25,

10:27,10:28,10:30,10:31

4.1(2g) and later

CSCvp73395

When connecting the ExternalSwitch app to a UCSM environment, ACI VLANs are not deployed to the fabric-connected vNICS that were configured as part of a redundancy peer.  The VLANs are allocated from the ACI VLAN pools, but are never added to the UCSM LAN group nor VLANs, and are not added to the vNICs when the vNICs are configured with Redundant Peer configurations in UCSM.

4.1(2g) and later

CSCvp79155

Inventory pull operations or VMware vCenter updates are delayed.

4.1(2g) and later

CSCvp79454

Syslog is not sent upon any changes in the fabric. Events are properly generated, but no Syslog is sent out of the oobmgmt ports of any of the APICs.

4.1(2g) and later

CSCvp80983

The ipv4RouteMo/ipv6RouteMo is not present in case of a shared service route leak. The route could have been deleted when EPG to BD association is removed and not added back when this association is created again.

4.1(2g) and later

CSCvp86156

If a user manually modifies an object controlled by the ACI CNI, the configuration will not be restored for up to 14 minutes.

4.1(2g) and later

CSCvp94060

No fault is raised when First Hop Security is enabled in a Layer 2 only Bridge Domain.

4.1(2g) and later

CSCvp94085

The APIC Licensemgr generates a core file while parsing an XML response.

4.1(2g) and later

CSCvp95407

Access-control headers are not present in invalid requests.

4.1(2g) and later

CSCvp97092

Tenants that start with the word "infra" are treated as the default "infra" tenant.

4.1(2g) and later

CSCvp99430

The troubleshooting wizard is unresponsive on the APIC.

4.1(2g) and later

CSCvp99508

The GUI is slow when accessing access policies. This is an enhancement request to add pagination to resolve this issue.

4.1(2g) and later

CSCvq02715

There are issues with out-of-band SSH connectivity to the leaf and spine switches if the out-of-band VRF instance is deleted and re-created with the same name.

4.1(2g) and later

CSCvq04110

The APIC API and CLI allow for the configuration of multiple native VLANs on the same interface. When a leaf switch port has more than one native VLAN configured (which is a misconfiguration) in place, and a user tries to configure a native VLAN encap on another port on the same leaf switch, a validation error is thrown that indicates an issue with the misconfigured port. This error will occur even if the current target port has no misconfigurations in place.

4.1(2g) and later

CSCvq14177

The Hyper-V agent is in the STOPPED state. Hyper-V agent logs indicate that process is stopping at the "Set-ExecutionPolicy Unrestricted" command.

4.1(2g) and later

CSCvq16739

For virtual pod and physical pod wizards, when a user tries to configure TEP addresses, there is an error on a preconfigured data plane TEP IP address. This error does not let the user proceed with rest of the configuration.

4.1(2g) and later

CSCvq19984

aci-container-controllers will delete all the contract relationships under the default_ext_epg if it loses connectivity to the APIC during the API call to get the subtree for the contract relationships.

4.1(2g) and later

CSCvq20055

In the APIC, the "show external-l3 static-route tenant <tenant_name>" command does not output as expected.

Symptom 1: The APIC outputs static-routes for tenant A, but not B. The "show external-l3 static-route tenant <tenant_name> vrf <vrf_name> node <range>" command provides the missing output.

Symptom 2: For the same tenant and a different L3Out , the command does not output all static-routes.

4.1(2g) and later

CSCvq22658

Description fields are not available for resource pools (VLAN, VSAN, Mcast, VXLAN etc).

4.1(2g) and later

CSCvq24993

The MTU cannot be modified on the SPAN destination after it is configured.

4.1(2g) and later

CSCvq28342

In a fabric with only fixed spine switches, the modular security license is still used when enabling MACsec. The fixed spine switch should share the same Add-on Security license entitlement with the leaf switch, because the features charge the same price.

4.1(2g) and later

CSCvq31358

"show external-l3 interfaces node <id> detail" will display "missing" for both "Oper Interface" and "Oper IP", even though the L3Out is functioning as expected.

4.1(2g) and later

CSCvq38191

An eventmgr core file gets generated when a user performs the syslog debug command "logit".

4.1(2g) and later

CSCvq39477

A user with read-only permissions cannot collect the techsupport files using the CLI nor a policy.

4.1(2g) and later

CSCvq39764

When you click Restart for the Microsoft System Center Virtual Machine Manager (SCVMM) agent on a scaled-out setup, the service may stop. You can restart the agent by clicking Start.

4.1(2g) and later

CSCvq39922

Specific operating system and browser version combinations cannot be used to log in to the APIC GUI.

Some browsers that are known to have this issue include (but might not be limited to) Google Chrome version 75.0.3770.90 and Apple Safari version 12.0.3 (13606.4.5.3.1).

4.1(2g) and later

CSCvq43101

When opening an external subnet, a user cannot see Aggregate Export/Import check boxes set in GUI even though they were already configured.

4.1(2g) and later

CSCvq45710

Fault F3206 for "Configuration failed for policy uni/infra/nodeauthpol-default, due to failedEPg or failedVlan is empty" is raised in the fabric when using the default 802.1x Node Authentication policy in the Switch Policy Group. In this scenario, Fail-auth EPG and VLAN has not been configured, as the 802.1x feature is not in use.

4.1(2g) and later

CSCvq55982

APIC running 4.1(2g) throws fault for pingcheck failed.

4.1(2g) and later

CSCvq56057

ACI running 4.1.1j.

4.1(2g) and later

CSCvq56243

When toggling the "legacy mode" option on a bridge domain, there should be a warning message that displays.

4.1(2g) and later

CSCvq57942

In a RedHat OpenStack platform deployment running the Cisco ACI Unified Neutron ML2 Plugin and with the CompHosts running OVS in VLAN mode, when toggling the resolution immediacy on the EPG<->VMM domain association (fvRsDomAtt.resImedcy) from Pre-Provision to On-Demand, the encap VLANs (vlanCktEp mo's) are NOT programmed on the leaf switches.

This problem surfaces sporadically, meaning that it might take several resImedcy toggles between PreProv and OnDemand to reproduce the issue.

4.1(2g) and later

CSCvq58304

VMM inventory-related faults are raised for VMware vCenter inventory, which is not managed by the VMM.

4.1(2g) and later

CSCvq58839

Configuration import fails due to a Global AES encryption key mismatch for pimIfPol.

4.1(2g) and later

CSCvq61877

The SNMP process repeatedly crashes on the APICs. The cluster and shards look healthy and do not have any CPU or memory utilization issues.

4.1(2g) and later

CSCvq63415

Disabling dataplane learning is only required to support a policy-based redirect (PBR) use case on pre-"EX" leaf switches.  There are few other reasons otherwise this feature should be disabled.  There currently is no confirmation/warning of the potential impact that can be caused by disabling dataplane learning.

4.1(2g) and later

CSCvq63491

When using Open vSwitch, which is used as part of ACI integration with Kubernetes or Red Hat Open Shift, there are some instances when memory consumption of the Open vSwitch grows over a time.

4.1(2g) and later

CSCvq74727

When making a configuration change to an L3Out (such as contract removal or addition), the BGP peer flaps or the bgpPeerP object is deleted from the leaf switch.  In the leaf switch policy-element traces, 'isClassic = 0, wasClassic =1' is set post-update from the Cisco APIC.

4.1(2g) and later

CSCvq77297

Plugin-handler triggers pre-remove the lifecycle hook for a scale-out app that is being removed. It keeps checking the status of pre-remove lifecycle hook using a Kron API, but if Kron is down, the plugin-handler waits for Kron to come back in the same transaction. This can cause the APIC cluster to diverge.

4.1(2g) and later

CSCvq80820

A previously-working traffic is policy dropped after the subject is modified to have the "no stats" directive.

4.1(2g) and later

CSCvq85224

The GUI navigates to the incorrect tree item from Virtual Networking -> domains - container domains.

4.1(2g) and later

CSCvq86573

Under a corner case, the Cisco APIC cluster DB may become partially diverged after upgrading to a release that introduces new services. A new release that introduces a new DME service (such as the domainmgr in the 2.3 release) could fail to receive the full size shard vector update in first two-minute window, which causes the new service flag file to be removed before all local leader shards are able to boot into the green field mode. This results in the Cisco APIC cluster DB becoming partially diverged.

4.1(2g) and later

CSCvq87663

When creating a subject and leaving "Wan SLA Policy" as unspecified (field not required), Fault F3330 is raised.

Fault code: F3330

Description: Failed to form relation to MO uni/tn-common/sdwanpolcont/sdwanslapol- of class extdevSDWanSlaPol

Type: Config

4.1(2g) and later

CSCvq88632

This is an enhancement request for allowing DVS MTU to be configured from a VMM domain policy and be independent of fabricMTU.

4.1(2g) and later

CSCvq89967

An OSPF L3Out with a check in the BGP check box is missing the redistribute route-map.

4.1(2g) and later

CSCvq95687

Currently, under Fabric > Inventory > Pod > Leaf Switch > General, the memory usage takes in consideration the MemFree field rather than the MemAvailable, which would be a more accurate representation of the usable memory in the system.
In some cases, the GUI might show that the memory utilization is around 90% while in reality it's 50%, because there is still the cached/buffered memory to take into account. This buffered/cached memory will free up a big chunk of memory in case more memory is needed.

4.1(2g) and later

CSCvq95817

The F3083 fault is thrown, notifying the user that an IP address is being used by multiple MAC addresses.

When navigating to the Fabric -> Inventory -> Duplicate IP Usage section, AVS VTEP IP addresses are seen as being learned individually across multiple leaf switches, such as 1 entry for Leaf 101, and 1 entry for Leaf 102.

Querying for the endpoint in the CLI of the leaf switch ("show endpoint ip <IP>") shows that the endpoint is learned behind a port channel/vPC, and not an individual link.

4.1(2g) and later

CSCvq96516

There is an event manager process crash.

4.1(2g) and later

CSCvr10510

There is a stale F2736 fault after configuring in-band IP addresses with the out-of-band IP addresses for the Cisco APIC.

4.1(2g) and later

CSCvr12971

The Cisco APIC GUI produces the following error messages when opening an EPG policy:  Received Invalid Json String.  The server returned an unintelligible response.This issue might affect backup/restore functionality.

4.1(2g) and later

CSCvr19693

When configuring local SPAN in access mode using the GUI or CLI and then running the "show running-config monitor access session<session>" command, the output does not include all source span interfaces.

4.1(2g) and later

CSCvr30815

vmmPLInf objects are created with epgKey's and DN's that have truncated EPG names ( truncated at ".").

4.1(2g) and later

CSCvr36851

Descending option will not work for the Static Ports table. Even when the user clicks descending, the sort defaults to ascending.

4.1(2g) and later

CSCvr38278

When using AVE with Cisco APIC, fault F0214 gets raised, but there is no noticeable impact on AVE operation:

descr: Fault delegate: Operational issues detected for OpFlex device: ..., error: [Inventory not available on the node at this time]

4.1(2g) and later

CSCvr41750

Policies may take a long time (over 10 minutes) to get programmed on the leaf switches. In addition, the APIC pulls inventory from the VMware vCenter repeatedly, instead of following the usual 24 hour interval.

4.1(2g) and later

CSCvr43275

While configuring a node in-band address using a wizard  or configuring a subnet under the bridge domain (tenant > bridge domain > subnet), and "x.x.x.0/subnet" is chosen as the range, the following message displays:

Incorrect message " Error 400 - Broadcast IP x.x.x.0/subnet" during inband config

4.1(2g) and later

CSCvr51069

In some circumstances, fault F1188 is generated. This fault is cosmetic.

4.1(2g) and later

CSCvr67887

Fault: F3060 "license-manager-license-authorization-expired" is raised although "show license status" shows the REGISTERED status and the license authorization shows AUTHORIZED.

4.1(2g) and later

CSCvr76318

Cisco ACI plugin containers do not get updated.

4.1(2g) and later

CSCvr82224

A leaf switch port flaps without raising a warning.

4.1(2g) and later

CSCvr85515

When trying to track an AVE endpoint IP address, running the "show endpoint ip x.x.x.x" command in the Cisco APIC CLI to see the IP address and checking the IP address on the EP endpoint in the GUI shows incorrect or multiple VPC names.

4.1(2g) and later

CSCvr85821

The API query /api/class/compCtrlr.json?rsp-subtree=full? returns a malformed JSON file.

4.1(2g) and later

CSCvr92169

The scope for host routes should be configurable; however, the option to define the scope is not available.

4.1(2g) and later

CSCvr94305

When a user logs into the Cisco APIC GUI and selects the SAL login domain, the authorization fails and the user gets thrown back to the initial login screen. The Cisco APIC NGINX logs show a failure to parse the AVPair value that is sent back by the SAML IDP. When checking the AVPair value returned by the Okta SAML IDP "<inRole value="shell:domains=all//read-all"/>", the value seems to have correct syntax.

4.1(2g) and later

CSCvr94614

There is a minor memory leak in svc_ifc_policydist when performing various tenant configuration removals and additions.

4.1(2g) and later

CSCvr96785

Configuring a static endpoint through the Cisco APIC CLI fails with the following error:

Error: Unable to process the query, result dataset is too big

Command execution failed.

4.1(2g) and later

CSCvr98638

When migrating an AVS VMM domain to Cisco ACI Virtual Edge, the Cisco ACI Virtual Edge that gets deployed is configured in VLAN mode rather than VXLAN Mode.  Because of this, you will see faults for the EPGs with the following error message:

"No valid encapsulation identifier allocated for the epg"

4.1(2g) and later

CSCvs03055

While configuring a logical node profile in any L3Out, the static routes do not have a description.

4.1(2g) and later

CSCvs04981

F2928 "KeyRing Certificate expired" faults raised and do not get cleared.

4.1(2g) and later

CSCvs05817

While using the UCSM plugin/VMM domain, during a vPC link failover test, VLANs from the vNIC template are removed. However, global (uplink) VLANs and the VLAN group remain untouched. In addition, the VMM domain is removed.

4.1(2g) and later

CSCvs10076

An error is raised while building an ACI container image because of a conflict with the /opt/ciscoaci-tripleo-heat-templates/tools/build_openstack_aci_containers.py package.

4.1(2g) and later

CSCvs16565

An endpoint is unreachable from the leaf node because the static pervasive route (toward the remote bridge domain subnet) is missing.

4.1(2g) and later

CSCvs21834

Randomly, the Cisco APIC GUI alert list shows an incorrect license expiry time.Sometimes it is correct, while at others times it is incorrect.

4.1(2g) and later

CSCvs29366

For a DVS with a controller, if another controller is created in that DVS using the same host name, the following fault gets generated: "hostname or IP address conflicts same controller creating controller with same name DVS".

4.1(2g) and later

CSCvs29556

When logging into the Cisco APIC using "apic#fallback\\user", the "Error: list index out of range" log message displays and the lastlogin command fails. There is no operational impact.

4.1(2g) and later

CSCvs31335

App techsupport collection does not work sometimes when triggered from the Cisco APIC GUI.

4.1(2g) and later

CSCvs32589

In Cisco ACI Virtual Edge, there are faults related to VMNICs. On the Cisco ACI Virtual Edge domain, there are faults related to the HpNic, such as "Fault F2843 reported for AVE | Uplink portgroup marked as invalid".

4.1(2g) and later

CSCvs39652

Host subnets (/32) that are created under an SCVMM-integrated EPG get pushed as a virtual machine subnet under the virtual machine network in SCVMM. Virtual machine networks on SCVMM  do not support /32 virtual machine subnets and fail to come up. Virtual machines that were previously associated to the virtual machine networks lose connectivity.

4.1(2g) and later

CSCvs47757

The plgnhandler process crashes on the Cisco APIC, which causes the cluster to enter a data layer partially diverged state.

4.1(2g) and later

CSCvs48552

When physical domains and external routed domains are attached to a security domain, these domains are mapped as associated tenants instead of associated objects under Admin > AAA > security management > Security domains.

4.1(2g) and later

CSCvs53247

OpenStack supports more named IP protocols for service graph rules than are supported in the Cisco APIC OpenStack Plug-in.

4.1(2g) and later

CSCvs55753

A Cisco ACI leaf switch does not have MP-BGP route reflector peers in the output of "show bgp session vrf overlay-1". As a result, the switch is not able to install dynamic routes that are normally advertised by MP-BGP route reflectors. However, the spine switch route reflectors are configured in the affected leaf switch's pod, and pod policies have been correctly defined to deploy the route reflectors to the leaf switch. Additionally, the bgpPeer managed objects are missing from the leaf switch's local MIT.

4.1(2g) and later

CSCvs57061

In a GOLF configuration, when an L3Out is deleted, the bridge domains stop getting advertised to the GOLF router even though another L3Out is still active.

4.1(2g) and later

CSCvs66244

The CLI command "show interface x/x switchport" shows VLANs configured and allowed through a port. However, when going to the GUI under Fabric > Inventory > node_name > Interfaces > Physical Interfaces > Interface x/x > VLANs, the VLANs do not show.

4.1(2g) and later

CSCvs74120

Selecting the RADIUS login domain from the GUI results in the following error:

Error: 400 - unknown property value test, name realm, class aaaConsoleAuth [(Dn0)] Dn0=uni/userext/authrealm/consoleauth,

4.1(2g) and later

CSCvs76244

The tmpfs file system that is mounted on /data/log becomes 100% utilized.

4.1(2g) and later

CSCvs78996

The policy manager (PM) may crash when use testapi to delete MO from policymgr db.

4.1(2g) and later

CSCvs81881

The Cisco APIC PSU voltage and amperage values are zero.

4.1(2g) and later

CSCvs81907

SNMP does not respond to GETs or sending traps on one or more Cisco APICs despite previously working properly.

4.1(2g) and later

CSCvt00796

The policymgr DME process can crash because of an OOM issue, and there are many pcons.DelRef managed objects in the DB.

4.1(2g) and later

CSCvt07565

The eventmgr database size may grow to be very large (up to 7GB). With that size, the Cisco APIC upgrade will take 1 hour for the Cisco APIC node that contains the eventmgr database.

In rare cases, this could lead to a failed upgrade process, as it times out while working on the large database file of the specified controller.

4.1(2g) and later

CSCvt13978

VPC protection created in prior to the 2.2(2e) release may not to recover the original virtual IP address after fabric ID recovery. Instead, some of vPC groups get a new vIP allocated, which does not get pushed to the leaf switch. The impact to the dataplane does not come until the leaf switch had a clean reboot/upgrade, because the rebooted leaf switch gets a new virtual IP that is not matched with a vPC peer. As a result, both sides bring down the virtual port channels, then the hosts  behind the vPC become unreachable.

4.1(2g) and later

CSCvt19061

Updating the interface policy group breaks LACP if eLACP is enabled on a VMM domain. If eLACP was enabled on the domain,  Creating, updating, or removing an interface policy group with the VMM AEP deletes the basic LACP that is used by the domain.

4.1(2g) and later

CSCvt28235

Fault F1527 is raised when the /data/log directory is over 75%  full. The /data/log directory contains a large amount of gzipped 21M svc_ifc_licensemgr.bin.warnplus.log files. The /data/log directory does not reach 80% or 90% full.

4.1(2g) and later

CSCvt37066

When migrating an EPG from one VRF table to a new VRF table, and the EPG keeps the contract relation with other EPGs in the original VRF table. Some bridge domain subnets in the original VRF table get leaked to the new VRF table due to the contract relation, even though the contract does not have the global scope and the bridge domain subnet is not configured as shared between VRF tables. The leaked static route is not deleted even if the contract relation is removed.

4.1(2g) and later

CSCvt40736

The login history of local users is not updated in Admin > AAA > Users > (double click on local user) Operational > Session.

4.1(2g) and later

CSCvt44854

- Leaf or spine switch is stuck in 'downloading-boot-script' status. The node never fully registers and does not become active in the fabric.

- You can check the status by running 'cat /mit/sys/summary | grep state' on the CLI of the spine or leaf switch:

   If the state is set to 'downloading-boot-script' for a long period of time (> 5 minutes) you may be running into this issue.

- Checking the policy element logs on the spine or leaf switch will confirm if the bootscript file cannot be found on the Cisco APIC:

   1. Change directory to /var/log/dme/log.

   2. Grep all svc_ifc_policyelem.log files for "downloadUrl - failed, error=HTTP response code said error"

   If you see this error message, check to make sure all Cisco APICs have the node bootscript files located in /firmware/fwrepos/fwrepo/boot.

4.1(2g) and later

CSCvt48819

When using the Internet Explore browser, there is console error. This error will break some pages under Fabric -> Inventory -> [ANY POD] -> [ANY LEAF] / [ANY SPINE] -> Interfaces -> Physical, PC, VPC, FC, FC PC.

4.1(2g) and later

CSCvt55566

In the Cisco APIC GUI, after removing the Fabric Policy Group from "System > Controllers > Controller Policies > show usage", the option to select the policy disappears, and there is no way in the GUI to re-add the policy.

4.1(2g) and later

CSCvt67279

After VMware vCenter generates a huge amount of events and after the eventId increments beyond 0xFFFFFFFF, the Cisco APIC VMM manager service may start ignoring the newest event if the eventId is lower than the last biggest event ID that Cisco APIC received. As a result, the changes to virtual distributed switch or AVE would not reflect to the Cisco APIC, causing required policies to not get pushed to the Cisco ACI leaf switch. For AVE, missing those events could put the port in the WAIT_ATTACH_ACK status.

4.1(2g) and later

CSCvt68786

A Cisco ACI Virtual Edge EPG is not programmed on a port channel toward the blade switch after it is deleted and recreated.

4.1(2g) and later

CSCvt87506

SSD lifetime can be exhausted prematurely if unused Standby slot exists

4.1(2g) and later

CSCvt93482

The per feature container for techsupport "objectstore_debug_info" fails to collect on spines due to invalid filepath.

Given filepath: more /debug/leaf/nginx/objstore*/mo | cat

Correct filepath: more /debug/spine/nginx/objstore*/mo | cat

TAC uses this file/data to collect information about excessive DME writes.

4.1(2g) and later

CSCvu01259

AAEP gets deleted while changing some other policy in the policy group. This only happens when using Firefox and changing a value in the leaf access port policy group. The issue is not seen when using other browsers.

4.1(2g) and later

CSCvu01452

The MD5 checksum for the downloaded Cisco APIC images is not verified before adding it to the image repository.

4.1(2g) and later

CSCvu08233

Inside the /firmware/fwrepos/fwrepo/boot directory, there is a Node-0 bootscript that seemingly points to a random leaf SN, depending on the Cisco APIC from which you're viewing the directory.

4.1(2g) and later

CSCvu12092

AVE is not getting the VTEP IP address from the Cisco APIC. The logs show a "pending pool" and "no free leases".

4.1(2g) and later

CSCvu21530

Protocol information is not shown in the GUI when a VRF table from the common tenant is being used in any user tenant.

4.1(2g) and later

CSCvu39569

The following error is encountered when accessing the Infrastructure page in the ACI vCenter plugin after inputting vCenter credentials.

"The Automation SDK is not authenticated"

VMware vCenter plug-in is installed using powerCLI. The following log entry is also seen in vsphere_client_virgo.log on the VMware vCenter:

/var/log/vmware/vsphere-client/log/vsphere_client_virgo.log

 [ERROR] http-bio-9090-exec-3314       com.cisco.aciPluginServices.core.Operation                       

sun.security.validator.ValidatorException: PKIX path validation failed:

java.security.cert.CertPathValidatorException: signature check failed

4.1(2g) and later

CSCvu49644

A tunnel endpoint doesn't receive a DHCP lease. This occurs with a newly deployed or upgraded Cisco ACI Virtual Edge.

4.1(2g) and later

CSCvu50088

When trying to assign a description to a FEX downlink/host port using the Config tab in the Cisco APIC GUI, the description will get applied to the GUI, but it will not propagate to the actual interface when queried using the CLI or GUI.

4.1(2g) and later

CSCvu62465

For an EPG containing a static leaf node configuration, the Cisco APIC GUI returns the following error when clicking the health of Fabric Location:

Invalid DN topology/pod-X/node-Y/local/svc-policyelem-id-0/ObservedEthIf, wrong rn prefix ObservedEthIf at position 63

4.1(2g) and later

CSCvu67388

When creating a VMware VMM domain and specifying a custom delimiter using the character _ (underscore), it is rejected, even though the help page says it is an acceptable character.

4.1(2g) and later

CSCvu74566

There is a BootMgr memory leak on a standby Cisco APIC. If the BootMgr process crashes due to being out of memory, it continues to crash, but system will not be rebooted. After the standby Cisco APIC is rebooted by hand, such as by power cycling the host using CIMC, the login prompt of the Cisco APIC will be changed to localhost and you will not be able to log into the standby Cisco APIC.

4.1(2g) and later

CSCvv25475

After a delete/add of a Cisco ACI-managed DVS, dynamic paths are not programmed on the leaf switch and the compRsDlPol managed object has a missing target. The tDn property references the old DVS OID instead of the latest value.# moquery -c compRsDlPol

4.1(2g) and later

CSCvv62861

A leaf switch reloads due to an out-of-memory condition after changing the contract scope to global.

4.1(2g) and later

CSCvw33061

Traffic loss is observed from multiple endpoints deployed on two different vPC leaf switches.

4.1(2g) and later

CSCvy30453

For a Cisco ACI fabric that is configured with fabricId=1, if APIC3 is replaced from scratch with an incorrect fabricId of "2," APIC3's DHCPd will set the nodeRole property to "0" (unsupported) for all dhcpClient managed objects. This will be propagated to the appliance director process for all of the Cisco APICs. The process then stops sending the AV/FNV update for any unknown switch types (switches that are not spine nor leaf switches). In this scenario, commissioning/decommissioning of the Cisco APICs will not be propagated to the switches, which causes new Cisco APICs to be blocked out of the fabric.
Another symptom is that the "acidag fnvread" command's output has a value of "unknown" in the role column.

4.1(2g) and later

CSCvq41830

NGINX spikes to 100% CPU usage.

4.1(2g)

CSCvq68833

When upgrading from a 4.0 release to a 4.1 release while using a certificate with the APIC local user, the "Mandatory permission VMM Connectivity and VMM EP are required" fault occurs when accessing the  Infrastructure page.

4.1(2g)

CSCvm28482

If you have two different L3outs due to design requirements and both are running BGP on the same node and the same vrf, configuration does not allow to use the same loopback to be used as update source for bgp peering for both L3outs.

In this customer scenario we have seeing that if the second L3out has no loopback created, in that case it picks the first loopback, however after reload we have seeing it might pick another interface to source the BGP sessions which breaks BGP after reload of the switch.

4.1(2g)

CSCvn07827

PLR fails after upgrading to a Cisco APIC 4.0 release.

4.1(2g)

CSCvn28063

After performing an upgrade on a spine in a remote POD, the upgrade will not complete.  The spine may boot up with the same version if reloaded manually. You may also notice that the spine is stuck in a bootloop with the following error raised on the console:

[ 1041.090380] obfl_klm writing reset reason 58, LC insertion sequence failure => [Failures < MAX] : powercycle

[ 1042.207780] write_mtd_flash_panic: successfully wrote 88 bytes at address 0xd68 to RR Iter: 0.

4.1(2g)

CSCvn79909

SNAPSHOT taken by remote user shows it has been created by ADMIN in Audit logs, and no information about the actual remote user creator of the snapshot.

4.1(2g)

CSCvn97710

When the APICs are booted up with different fabric IDs during bootstrap, instead of creating a wiring mismatch, the APICs are brought into the cluster and the policy element (PE) data management engine (DME) in the leaf switches update their fabric ID.

Fix: We ignore the fabric ID changes on the PE side and the node sticks to the first fabric ID that it learned. We do not raise a wiring mismatch and block the APICs because it will break upgrades.

4.1(2g)

CSCvo17056

SNMPv3 traps generated by the APIC are dropped by NMS systems that have replay protection enabled.

4.1(2g)

CSCvo23714

NGINX has an out of memory issue approximately every 10 hours due to the memory usage growing to up to 8GB.

4.1(2g)

CSCvo39336

If many faults flap on the switch nodes, the GUI may run slowly and have poor response.

4.1(2g)

CSCvo58876

A fault gets raised for an app and the fault content includes the following message:

  WARNING: Your kernel does not support swap limit capabilities, memory limited without swap.

But, when the logs get analyzed the real issue is not related to the above warning message.

4.1(2g)

CSCvo62969

SVI Primary IP pushed without subnet mask might cause an outage as the route will be advertised by the presence of valid secondary IP but adjacency wont be built.

4.1(2g)

CSCvo80048

Serial port baud rate changed.

4.1(2g)

CSCvo86747

The properties of a Layer 4 to Layer 7 device cannot be viewed.

4.1(2g)

CSCvo88534

When modifying properties, without clicking on "submit", if you download the configuration, the changes will be pushed regardless.

4.1(2g)

CSCvo98381

Removing an FC interface policy causes the Eth interface policy associated with the same AEP also being deleted.

4.1(2g)

CSCvp07262

Configuration import (configImportP) with importMode="atomic" and importType="replace" may not work.

4.1(2g)

CSCvp38627

Some tenants stop having updates to their state pushed to the APIC. The aim-aid logs have messages similar to the following example:

An unexpected error has occurred while reconciling tenant tn-prj_...: long int too large to convert to float

4.1(2g)

CSCvp42686

GUI is slow and becomes unresponsive once the Operational Tab is opened for the EPG.

4.1(2g)

CSCvp53892

When the APIC fails to retrieve/process the adjacency for one of the host uplink VMNICs, it does not continue to process the rest of the uplink VMNICs. The resulting behavior can be different depending upon the order in which the host VMNICs is processed; which can be different each time. With the remainder of the adjacency that is not being processed, this can result in APIC removing VLANs from the leaf switches depending upon the resolution immediacy of the VMM domain.

4.1(2g)

CSCvp64280

A vulnerability in the fabric infrastructure VLAN connection establishment of the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, adjacent attacker to bypass security validations and connect an unauthorized server to the infrastructure VLAN.

The vulnerability is due to insufficient security requirements during the Link Layer Discovery Protocol (LLDP) setup phase of the infrastructure VLAN. An attacker could exploit this vulnerability by sending a malicious LLDP packet on the adjacent subnet to the Cisco Nexus 9000 Series Switch in ACI mode. A successful exploit could allow the attacker to connect an unauthorized server to the infrastructure VLAN, which is highly privileged. With a connection to the infrastructure VLAN, the attacker can make unauthorized connections to Cisco Application Policy Infrastructure Controller (APIC) services or join other host endpoints.

Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.

This advisory is available at the following link:

https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190703-n9kaci-bypass

4.1(2g)

CSCvp64857

A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device.

The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link:

https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190703-ccapic-restapi

4.1(2g)

CSCvp71082

The same GIPo is allocated for different BDs when BD scale is low (less then 7K BDs in total).

4.1(2g)

CSCvp82252

While modifying the host route of OpenStack, the following subnet trace is generated:

Response :

{

    "NeutronError": {

        "message": "Request Failed: internal server error while processing your request.",

        "type": "HTTPInternalServerError",

        "detail": ""

    }

}

4.1(2g)

CSCvp85106

Not Found (403, 404) when clicking on help icon under Admin/Firmware.

4.1(2g)

CSCvp95621

The showconfig command fails and displays an exception.

4.1(2g)

CSCvq03722

When performing a clean reboot using the acidiag touch setup or the acidiag reboot commands, during the boot up of APIC, you will observe a significant delay between the enter key to continue and the interactive setup parameter menu.  No other operational impact other than slower boot up due to system delay.

4.1(2g)

CSCvq41830

NGINX spikes to 100% CPU usage.

4.1(2m)

CSCvq68833

When upgrading from a 4.0 release to a 4.1 release while using a certificate with the APIC local user, the "Mandatory permission VMM Connectivity and VMM EP are required" fault occurs when accessing the  Infrastructure page.

4.1(2m)

CSCvs40434

When performing a network-centric migration to Cisco ACI, the surrounding network usually can handle only 1 EPG per bridge domain. If the surrounding network is not ready, there could be loop in the network.

4.1(2w)

CSCvj26666

The "show run leaf|spine <nodeId>" command might produce an error for scaled up configurations.

4.1(2g) and later

CSCvj90385

With a uniform distribution of EPs and traffic flows, a fabric module in slot 25 sometimes reports far less than 50% of the traffic compared to the traffic on fabric modules in non-FM25 slots.

4.1(2g) and later

CSCvs19322

Upgrading Cisco APIC from a 3.x release to a 4.x release causes Smart Licensing to lose its registration. Registering Smart Licensing again will clear the fault.

4.1(2g) and later

CSCvs77929

In the 4.x and later releases, if a firmware policy is created with different name than the maintenance policy, the firmware policy will be deleted and a new firmware policy gets created with the same name, which causes the upgrade process to fail.

4.1(2g) and later

Product ID

Description

APIC-L1

Cisco APIC with large CPU, hard drive, and memory configurations (more than 1000 edge ports)

APIC-L2

Cisco APIC with large CPU, hard drive, and memory configurations (more than 1000 edge ports)

APIC-L3

Cisco APIC with large CPU, hard drive, and memory configurations (more than 1200 edge ports)

APIC-M1

Cisco APIC with medium-size CPU, hard drive, and memory configurations (up to 1000 edge ports)

APIC-M2

Cisco APIC with medium-size CPU, hard drive, and memory configurations (up to 1000 edge ports)

APIC-M3

Cisco APIC with medium-size CPU, hard drive, and memory configurations (up to 1200 edge ports)