The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
As ofCisco MDS NX-OS Release 4.2(1) software configuration information is available in new feature-specific configuration guides for the following information:
The information in these new guides previously existed in the Cisco MDS 9000 Family CLI Configuration Guide and in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Those configuration guides remain available on Cisco.com and should be used for all software releases prior to Cisco MDS NX-OS Release 4.2(1). Each guide addresses the features introduced in or available in a particular release. Select and view the configuration guide that pertains to the software installed in your switch.
For a complete list of document titles, see the list of Related Documentation in the “Preface.”
To find additional information about Cisco MDS NX-OS Release 5.0(1), see the Cisco MDS 9000 Family Release Notes available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.htm
The information in the new Cisco MDS 9000 Family NX-OS Inter-VSAN Routing Configuration Guide previously existed in the Fabric Configuration section in the Cisco MDS 9000 Family CLI Configuration Guide, Release 4.2(1).
Table 1-1 lists the New and Changed features for this guide, starting with Cisco MDS NX-OS Release 5.0(1a).