The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
audience 2-v
backup and restore VSM 6-1
information about 1-5
remote recovery 2-1
classifications, traffic 1-6
configuration limits A-1
conventions 2-vi
virtual service blade 4-6
delete a virtual service blade 4-11
related documents 2-vi
Backing Up and Restoring a VSB Configuration 6-2
Replacing a Cisco Nexus 1010 6-2
maximum supported A-1
limits, configuration A-1
management, remote 2-1
verify 5-6, 6-15, 7-7
VSM 5-1
modify a virtual service blade 4-13
modify uplink 3-5
maximum supported A-1
passthrough interface 4-21
supported limits A-1
related documents 2-viii
remote recovery 2-1
traffic classifications 1-6
unreachable device 2-1
comparison 1-7
configure 3-1
single uplink 1-9
three uplinks 1-12
two uplinks with LACP 1-10, 1-11
modify 3-5
verify 3-18
migration 5-6, 6-15, 7-7
uplinks 3-18
virtual service blade 4-26
virtual service blade 4-1
create 4-6
delete 4-11
HA, about 4-2
modify 4-13
NAM, about 4-4, 4-5
Passthrough 4-19
setting Passthrough interface 4-22
types, about 1-5, 4-1
verify 4-26
VSM, about 4-2
maximum supported A-1
Index
audience 2-v
backup and restore VSM 6-1
information about 1-5
remote recovery 2-1
classifications, traffic 1-6
configuration limits A-1
conventions 2-vi
virtual service blade 4-6
delete a virtual service blade 4-11
related documents 2-vi
Backing Up and Restoring a VSB Configuration 6-2
Replacing a Cisco Nexus 1010 6-2
maximum supported A-1
limits, configuration A-1
management, remote 2-1
verify 5-6, 6-15, 7-7
VSM 5-1
modify a virtual service blade 4-13
modify uplink 3-5
maximum supported A-1
passthrough interface 4-21
supported limits A-1
related documents 2-viii
remote recovery 2-1
traffic classifications 1-6
unreachable device 2-1
comparison 1-7
configure 3-1
single uplink 1-9
three uplinks 1-12
two uplinks with LACP 1-10, 1-11
modify 3-5
verify 3-18
migration 5-6, 6-15, 7-7
uplinks 3-18
virtual service blade 4-26
virtual service blade 4-1
create 4-6
delete 4-11
HA, about 4-2
modify 4-13
NAM, about 4-4, 4-5
Passthrough 4-19
setting Passthrough interface 4-22
types, about 1-5, 4-1
verify 4-26
VSM, about 4-2
maximum supported A-1