The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This section describes the information in this document that is either new or has changed with each release.
To find additional information about new features or command changes, see the following:
|
|
|
|
---|---|---|---|
vemcmd set port-mode command |
Restore lost connectivity due to incorrect port setting. |
4.0(4)SV1(3a) |
|
VEM health check |
The VEM health check shows the cause of a connectivity problem and recommends next steps in troubleshooting. |
4.0(4)SV1(3) |
"Verifying Network Connectivity Between the VSM and the VEM" section on page 6-11 |
VSM connection failure after ESX reboot |
The section describes how to prevent loss of connectivity related to an MTU mismatch following a reboot of the ESX. |
4.0(4)SV1(3) |