The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
Use one of the following commands to verify the configuration:
For detailed information about the command output, see the Cisco Nexus 1000V Command Reference.
switch# show port-profile port-profile UpLinkProfile1 description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: none port-group: max ports: 32 inherit: config attributes: channel-group auto mode on mac-pinning evaluated config attributes: channel-group auto mode on mac-pinning assigned interfaces: port-profile UpLinkProfile2 description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: none port-group: max ports: 32 inherit: config attributes: channel-group auto mode on sub-group cdp evaluated config attributes: channel-group auto mode on sub-group cdp assigned interfaces: port-profile UpLinkProfile3 description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: none port-group: max ports: 32 inherit: config attributes: channel-group auto mode on sub-group manual evaluated config attributes: channel-group auto mode on sub-group manual assigned interfaces: switch#
switch# show port-profile name UpLinkProfile3 port-profile UpLinkProfile3 description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: none port-group: max ports: 32 inherit: config attributes: channel-group auto mode on sub-group manual evaluated config attributes: channel-group auto mode on sub-group manual assigned interfaces: switch#
switch# show port-profile brief -------------------------------------------------------------------------------- Port Profile Remote Conf Eval Child Child Profile State Mgmt Items Items Intfs Profs -------------------------------------------------------------------------------- UplinkProfile1 enabled vmware 3 3 1 0 UplinkProfile2 enabled vmware 3 3 2 0 Ubuntu-Profile enabled vmware 3 3 1 0 switch#
switch# show port-profile virtual usage ------------------------------------------------------------------------------- Port Profile Port Adapter Owner ------------------------------------------------------------------------------- n1kv-uplink0 Po1 Eth3/2 vmnic1 localhost. Eth3/3 vmnic2 localhost. vlan1767 Veth7 Net Adapter 1 all-tool-7 Veth8 Net Adapter 1 all-tool-8 aipc1765 Veth4 Net Adapter 1 bl-h-s inband1766 Veth6 Net Adapter 3 bl-h-s mgmt1764 Veth5 Net Adapter 2 bl-h-s vpc-mac-uplink Po7 Eth5/2 vmnic1 localhost. Eth5/3 vmnic2 localhost. ch-vpc-mac-uplink Po2 Po3 Eth4/2 vmnic1 VDANIKLNCOS Eth4/3 vmnic2 VDANIKLNCOS ch-aipc1765 Veth1 Net Adapter 1 bl-h-p ch-mgmt1764 Veth2 Net Adapter 2 bl-h-p ch-inband1766 Veth3 Net Adapter 3 bl-h-p switch#
switch# show port-profile expand-interface name UplinkProfile1 port-profile UplinkProfile1 Ethernet2/2 switchport mode trunk switchport trunk allowed vlan 110-119 no shutdown switch#
switch# show port-profile expand-interface port-profile UplinkProfile1 Ethernet2/2 switchport mode trunk switchport trunk allowed vlan 110-119 no shutdown port-profile UplinkProfile2 Ethernet2/3 switchport mode trunk switchport trunk allowed vlan 117 no shutdown Ethernet2/4 switchport mode trunk switchport trunk allowed vlan 117 no shutdown port-profile Ubuntu-Profile Vethernet439 switchport mode access switchport access vlan 118 no shutdown switch#
switch# show port-profile sync-status interface ethernet 3/2 Ethernet3/2 port-profile: uplink interface status: quarantine sync status: out of sync cached commands: errors: command cache overrun recovery steps: bring interface online switch#
switch# show running-config port-profile port-profile type ethernet UplinkProfile1 description "Profile for critical system ports" vmware port-group switchport mode access switchport access vlan 113 switchport trunk native vlan 113 channel-group auto mode on no shutdown port-profile type vethernet UplinkProfile2 vmware port-group vmware max-ports 5 switchport mode trunk switchport trunk native vlan 112 channel-group auto mode on sub-group cdp no shutdown switch#
switch# show port-profile-role name adminUser Name: adminUser Description: adminOnly Users: hdbaar (user) Assigned port-profiles: allaccess2 switch#
switch# show port-profile-role users Groups: Administrators TestGroupB Users: dbaar fgreen suchen mariofr switch#
Feature Name | Releases | Feature Information |
---|---|---|
show port-profile-role users |
4.2(1)SV1(4) |
This command output shows the available users and groups. |
show port-profile-role |
4.2(1)SV1(4) |
This command output shows the configuration for port profile roles. |
show running-config port-profile |
4.0(4)SV1(2) |
This command output shows the configuration for port profiles. |
show running-config |
4.0(4)SV1(2) |
This command output has the following changes: |
show port-profile name |
4.0(4)SV1(2) |
This command output shows the port profile type, pinning, and channel-group configuration. The uplink capability is removed from the output of this command since port profiles used as uplinks are now configured as Ethernet type instead. |
Port Profile verification |
4.0(4)SV1(1) |
This feature was introduced. |