The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides release specific information for each new and changed feature in the Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide.
For additional information about , see the available at the following Cisco website, http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html.
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
Fabric Extender feature |
The feature fex command is disabled by default. |
4.1(3)N2 (1) |
Information About Associating a Fabric Extender to a Fabric Interface |
Fabric Extender models |
The new Cisco Nexus 2248TP and Cisco Nexus 2232PP models are described. |
4.2(1)N1(1) |
|
Host interface EtherChannel |
Up to 8 interfaces can be combined in an EtherChannel. |
4.2(1)N1(1) |
|
Protocol offload |
A number of protocols are offloaded from the parent switch, including LLDP/DCBX, CDP, and LACP. |
4.2(1)N1(1) |
|
FCoE support |
The Cisco Nexus 2232PP supports FCoE on its 10-Gigabit Ethernet host interfaces. |
4.2(1)N1(1) |