Accessory Kits
This appendix describes the contents of the accessory kits for each of the Cisco Nexus 5000 Series switches.
This appendix includes the following sections:
Cisco Nexus 5596UP and 5596T Switch Accessory Kit
This section describes the accessory kit contents for the Cisco Nexus 5596UP and the Cisco Nexus 5596T switches.
The Cisco Nexus 5596UP and Cisco Nexus 5596T switch accessory kit includes the following items:
- 2 slider rails
- 2 rack-mount guides
- 2 rack-mount brackets
- 16 M4 x 0.7 x 8-mm Phillips countersunk screws
- 1 ground lug kit
Note Additional parts can be ordered from your customer service representative.
Cisco Nexus 5548UP and Cisco Nexus 5548P Switch Accessory Kit
This section describes the accessory kit contents for the Cisco Nexus 5548 switches.
The Cisco Nexus 5548 switch accessory kit includes the following items:
- 2 slider rails
- 2 rack-mount guides
- 2 rack-mount brackets
- 12 M4 x 0.7 x 8-mm Phillips countersunk screws
- 1 ground lug kit
Note Additional parts can be ordered from your customer service representative.
Cisco Nexus 5020 Switch Accessory Kit
This section describes the accessory kit contents for the Cisco Nexus 5020 switch and describes how to attach a power cord to the switch.
The Cisco MDS 9200 Series accessory kit includes the following items:
- 2 slider rails
- 2 rack-mount guides
- 2 rack-mount brackets
- 16 M4 x 0.7 x 8-mm Phillips countersunk screws
- 1 console cable with an RJ-45-RS-232 adapter and a DB9 adapter
- 1 ground lug kit
- 1 ESD wrist strap
- 8 power cord clips (a wire clip that is used to retain the power cord).
Note Additional parts can be ordered from your customer service representative.
Cisco Nexus 5010 Switch Accessory Kit
This section describes the accessory kit contents for the Cisco Nexus 5010 switch and describes how to attach a power cord to the switch.
The Cisco Nexus 5010 switch accessory kit includes the following items:
- 2 slider rails
- 2 rack-mount guides
- 2 rack-mount brackets
- 12 M4 x 0.7 x 8-mm Phillips countersunk screws
- 1 console cable with an RJ-45-RS-232 adapter and a DB9 adapter
- 1 ground lug kit
- 1 ESD wrist strap
- 4 power cord clip (a wire clip that is used to retain the power cord).
Note Additional parts can be ordered from your customer service representative.