The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
broadcast traffic 4-4
CE VLANs 2-4, 3-1, 4-2, 4-5, 4-6
configuring 4-5, 4-6
conflict resolution 2-6
displaying 2-16
conversational learning 2-4, 2-5
DHCP snooping 1-4
disabling 2-10
related documents i-viii
ECMP 4-1, 4-3
enabling 1-4, 2-7
configuring 2-9
example 3-13
EtherType 2-3
FTag 2-3
configuring vPC+ 3-11
switch ID 2-6
timers 2-6
FabricPath forwarding 4-1
unicast traffic 4-3
FabricPath VLANs 2-4, 3-1, 4-2
configuring 4-5, 4-6
example configuration 4-10
displaying 3-12
configuring 4-5
displaying 4-9
example configuration 4-10
multidestination traffic 4-4
trees 4-1
FTag 2-3
FTags 2-3, 2-6, 4-1, 4-4
GM-LSP 4-4
configuring 2-14
graceful migration 2-6
guidelines 1-4
IGMP Snooping 4-5
PIM 4-5
clearing counters 3-12
displaying 3-12
examples 3-13
network 3-2
statistics 3-12
STP 3-2
tunnel 3-11
known unicast traffic 4-3
forwarding 2-4
Layer 2 gateway switch 3-2
STP priority 3-7
layer2 gateway switches 3-10
Layer 2 IS-IS 2-3, 5-1
adjacencies 2-3, 4-3
advanced settings 5-1
clearing 5-10
configuring 5-2
displaying 5-12
ECMP 2-3
global parameters 5-2
interface parameters 5-6
trees 4-2
limitations 1-4
displaying 4-9
unicast traffic 4-8
hierarchical 2-3
MAC addresses 2-5
conversational learning 2-4
mobility 2-5
multicast traffic 4-4
groups 4-4
IGMP Snooping 4-5
multidestination packets 4-2
multidestination traffic 4-4
forwarding 2-4
multipathing at Layer 2 4-1
FTag 2-3
new and changed features (table) ii-xi
ODA 2-2
OSA 2-2
ports 3-1
RPF 4-2
Spanning Tree Protocol 2-3
STP 3-2, 3-3
displaying 3-12
root 3-2
separate connected domains 3-10
TCNs 3-3
STP domain 3-13
STP domains 3-10
STP priority 3-7
example 3-13
switch ID 2-2, 2-6
conflict 2-6
displaying 2-16
switching 2-1
clearing counters 2-16
default settings 2-17
example 2-5
prerequisites 1-3
statistics 2-16
verifying 2-16
TCNs 3-3, 3-10
timers 2-6
allocate-delay 2-13
configuring 2-12, 2-13
displaying 2-16
linkup-delay 2-13
transition-delay 2-13
TLV 2-6
TLV information 2-4
FabricPath 4-3
traditional learning 2-4
CE 4-3
FabricPath 4-3
trees 4-1, 4-4
displaying 4-9
troubleshooting 2-4, 2-6, 2-15, 3-3, 3-4, 4-3, 4-5
enabling 1-4, 2-7
traffic drops 2-14
trunk ports 3-1
TTL 2-3
creating 3-11
unicast traffic 4-3
unknown unicast traffic 4-4
VLAN modes 2-4
VLANs 2-4, 3-1, 4-5, 4-6
default 4-11
default mode 4-3
displaying 4-9
example configuration 4-10
FabricPath 4-2
troubleshooting 4-3
vPC+ 3-3, 3-4
configuring 3-13
displaying 3-12
switch ID 3-11
Index
broadcast traffic 4-4
CE VLANs 2-4, 3-1, 4-2, 4-5, 4-6
configuring 4-5, 4-6
conflict resolution 2-6
displaying 2-16
conversational learning 2-4, 2-5
DHCP snooping 1-4
disabling 2-10
related documents i-viii
ECMP 4-1, 4-3
enabling 1-4, 2-7
configuring 2-9
example 3-13
EtherType 2-3
FTag 2-3
configuring vPC+ 3-11
switch ID 2-6
timers 2-6
FabricPath forwarding 4-1
unicast traffic 4-3
FabricPath VLANs 2-4, 3-1, 4-2
configuring 4-5, 4-6
example configuration 4-10
displaying 3-12
configuring 4-5
displaying 4-9
example configuration 4-10
multidestination traffic 4-4
trees 4-1
FTag 2-3
FTags 2-3, 2-6, 4-1, 4-4
GM-LSP 4-4
configuring 2-14
graceful migration 2-6
guidelines 1-4
IGMP Snooping 4-5
PIM 4-5
clearing counters 3-12
displaying 3-12
examples 3-13
network 3-2
statistics 3-12
STP 3-2
tunnel 3-11
known unicast traffic 4-3
forwarding 2-4
Layer 2 gateway switch 3-2
STP priority 3-7
layer2 gateway switches 3-10
Layer 2 IS-IS 2-3, 5-1
adjacencies 2-3, 4-3
advanced settings 5-1
clearing 5-10
configuring 5-2
displaying 5-12
ECMP 2-3
global parameters 5-2
interface parameters 5-6
trees 4-2
limitations 1-4
displaying 4-9
unicast traffic 4-8
hierarchical 2-3
MAC addresses 2-5
conversational learning 2-4
mobility 2-5
multicast traffic 4-4
groups 4-4
IGMP Snooping 4-5
multidestination packets 4-2
multidestination traffic 4-4
forwarding 2-4
multipathing at Layer 2 4-1
FTag 2-3
new and changed features (table) ii-xi
ODA 2-2
OSA 2-2
ports 3-1
RPF 4-2
Spanning Tree Protocol 2-3
STP 3-2, 3-3
displaying 3-12
root 3-2
separate connected domains 3-10
TCNs 3-3
STP domain 3-13
STP domains 3-10
STP priority 3-7
example 3-13
switch ID 2-2, 2-6
conflict 2-6
displaying 2-16
switching 2-1
clearing counters 2-16
default settings 2-17
example 2-5
prerequisites 1-3
statistics 2-16
verifying 2-16
TCNs 3-3, 3-10
timers 2-6
allocate-delay 2-13
configuring 2-12, 2-13
displaying 2-16
linkup-delay 2-13
transition-delay 2-13
TLV 2-6
TLV information 2-4
FabricPath 4-3
traditional learning 2-4
CE 4-3
FabricPath 4-3
trees 4-1, 4-4
displaying 4-9
troubleshooting 2-4, 2-6, 2-15, 3-3, 3-4, 4-3, 4-5
enabling 1-4, 2-7
traffic drops 2-14
trunk ports 3-1
TTL 2-3
creating 3-11
unicast traffic 4-3
unknown unicast traffic 4-4
VLAN modes 2-4
VLANs 2-4, 3-1, 4-5, 4-6
default 4-11
default mode 4-3
displaying 4-9
example configuration 4-10
FabricPath 4-2
troubleshooting 4-3
vPC+ 3-3, 3-4
configuring 3-13
displaying 3-12
switch ID 3-11