The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco NX-OS Routing Information Protocol (RIP) commands that begin with C.
To clear policy statistics for routes redistributed into the Routing Information Protocol (RIP) topology table, use the clear ip rip policy statistics redistribute command in any mode.
clear ip rip policy statistics redistribute { bgp id | direct | eigrp id | ospf id | static } [ vrf vrf-name ]
|
|
---|---|
This example shows how to clear policy statistics for EIGRP:
|
|
---|---|
To clear the Routing Information Protocol (RIP) statistics, use the clear ip rip statistics command in any mode.
clear ip rip statistics [ interface type instance ] [ vrf vrf-name ]
(Optional) Specifies the interface to clear topology entries. |
|
(Optional) Specifies a particular virtual routing and forwarding (VRF) instance. The VRF name can be up to 32 alphanumeric characters. |
|
|
---|---|
This example shows how to clear all RIP statistics:
|
|
---|---|
Displays database and interface entry information for the RIP process. |