The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To display type network-qos class maps, use the show class-map type network-qos command.
show class-map type network-qos
This command has no arguments or keywords.
None
Any
Release |
Modification |
---|---|
5.1(1) |
This command was introduced. |
This command does not require a license.
This example shows how to display the type network-qos class maps:
switch# show class-map type network-qos Type network-qos class-maps =========================== class-map type network-qos match-any c-nq-8e Description: 8E Drop CoS map match cos 0-7 class-map type network-qos match-any c-nq-4e-drop Description: 4E Drop CoS map match cos 0,5-7 class-map type network-qos match-any c-nq-6e-drop Description: 6E Drop CoS map match cos 0-2,5-7 class-map type network-qos match-any c-nq-7e-drop Description: 7E Drop CoS map match cos 0-2,4-7 class-map type network-qos match-any c-nq-4e-ndrop Description: 4E No-Drop CoS map match cos 1-2,4 class-map type network-qos match-any c-nq-6e-ndrop Description: 6E No-Drop CoS map match cos 4 class-map type network-qos match-any c-nq-4e-ndrop-fcoe Description: 4E No-Drop FCoE CoS map match cos 3 match protocol fcoe class-map type network-qos match-any c-nq-6e-ndrop-fcoe Description: 6E No-Drop FCoE CoS map match cos 3 match protocol fcoe class-map type network-qos match-any c-nq-7e-ndrop-fcoe Description: 7E No-Drop FCoE CoS map match cos 3 match protocol fcoe
Command |
Description |
---|---|
class-map |
Creates or modifies a class map. |
To display type qos class maps, use the show class-map type qos command.
show class-map type qos [ class-map-name | color-class-map-name ]
class-map-name |
(Optional) Named class map. The name class-default is reserved. |
color-class-map-name |
(Optional) System-defined color class map. |
Displays all type qos class maps if no class map name is specified.
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
The following table displays the list of system-defined class maps that display with this command:
Class Map Name |
Description |
---|---|
conform-color-in |
Type qos conform color class map in the input direction. This color-aware class map makes a policer color-aware for conform action. |
conform-color-out |
Type qos conform color class map in the output direction. This color-aware class map makes a policer color-aware for conform action. |
exceed-color-in |
Type qos exceed color class map in the input direction. This color-aware class map makes a policer color-aware for exceed action. |
exceed-color-out |
Type qos exceed color class map in the output direction. This color-aware class map makes a policer color-aware for exceed action. |
When you enter the command show class-map with no arguments or keywords, the system also displays the Control Plane Policing (CoPP) configuration.
This command does not require a license.
This example shows how to display all type qos class maps:
switch(config)# show class-map type qos Type qos class-maps ==================== class-map type qos match-all abc match dscp 0-3 class-map type qos conform-color-in Description: Conform color map in input direction class-map type qos conform-color-out Description: Conform color map in output direction class-map type qos exceed-color-in Description: Exceed color map in input direction class-map type qos exceed-color-out Description: exceed color map in output direction
Command |
Description |
---|---|
class-map |
Creates or modifies a class map. |
To display type queuing class maps, use the show class-map type queuing command.
show class-map type queuing [class-map-name]
class-map-name |
(Optional) Named class map. |
Displays all type queuing class maps if no class map name is specified.
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
For a list of the system-defined type queuing class maps, see Table 1:
This command does not require a license.
This example shows how to display all type queuing class maps:
switch(config)# show class-map type queuing Type queuing class-maps ======================== class-map type queuing match-any 2q4t-in-q1 Description: Classifier for ingress queue 1 of type 2q4t match cos 5-7 class-map type queuing match-any 2q4t-in-q-default Description: Classifier for ingress default queue of type 2q4t match cos 0-4 class-map type queuing match-any 8q2t-in-q1 Description: Classifier for ingress queue 1 of type 8q2t match cos 5-7 class-map type queuing match-any 8q2t-in-q2 Description: Classifier for ingress queue 2 of type 8q2t class-map type queuing match-any 8q2t-in-q3 Description: Classifier for ingress queue 3 of type 8q2t class-map type queuing match-any 8q2t-in-q4 Description: Classifier for ingress queue 4 of type 8q2t class-map type queuing match-any 8q2t-in-q5 Description: Classifier for ingress queue 5 of type 8q2t class-map type queuing match-any 8q2t-in-q6 Description: Classifier for ingress queue 6 of type 8q2t class-map type queuing match-any 8q2t-in-q7 Description: Classifier for ingress queue 7 of type 8q2t class-map type queuing match-any 8q2t-in-q-default Description: Classifier for ingress default queue of type 8q2t match cos 0-4 class-map type queuing match-any 1p3q4t-out-pq1 Description: Classifier for egress priority queue of type 1p3q4t match cos 5-7 class-map type queuing match-any 1p3q4t-out-q2 Description: Classifier for egress queue 2 of type 1p3q4t class-map type queuing match-any 1p3q4t-out-q3 Description: Classifier for egress queue 3 of type 1p3q4t class-map type queuing match-any 1p3q4t-out-q-default Description: Classifier for egress default queue of type 1p3q4t match cos 0-4 class-map type queuing match-any 1p7q4t-out-pq1 Description: Classifier for egress priority queue of type 1p7q4t match cos 5-7 class-map type queuing match-any 1p7q4t-out-q2 Description: Classifier for egress queue 2 of type 1p7q4t class-map type queuing match-any 1p7q4t-out-q3 Description: Classifier for egress queue 3 of type 1p7q4t class-map type queuing match-any 1p7q4t-out-q4 Description: Classifier for egress queue 4 of type 1p7q4t class-map type queuing match-any 1p7q4t-out-q5 Description: Classifier for egress queue 5 of type 1p7q4t class-map type queuing match-any 1p7q4t-out-q6 Description: Classifier for egress queue 6 of type 1p7q4t class-map type queuing match-any 1p7q4t-out-q7 Description: Classifier for egress queue 7 of type 1p7q4t class-map type queuing match-any 1p7q4t-out-q-default Description: Classifier for egress default queue of type 1p7q4t match cos 0-4
Command |
Description |
---|---|
class-map |
Creates or modifies a class map. |
To display the status of the shared buffer, use the show hardware qos shared-buffer command.
show hardware qos shared buffer [ module module number ] [ port-group port number ]
module |
Displays the shared buffer module information. |
module number |
Number of the module. The range is from 1 to 18. |
port-group |
Displays the shared buffer port-group information. |
module number |
Number of the port-group. The range is from 0 to 11. |
None
Any
Release |
Modification |
---|---|
6.2(10) |
This command was introduced |
This command does not require a license.
This example shows how to display the hardware QoS shared buffer module:
switch# show hardware qos shared-buffer module 1 Device: M2 -------------------- INGRESS VOQ DROP COUNTS: -------------------- Source Intf Traffic Type Drop Reason Count ----------- ------------ -------------------- ------------------------ eth 17/1 Unicast VOQ tail-drop 2130695 eth 17/1 Multicast VOQ tail-drop 2077665 eth 17/2 Unicast VOQ tail-drop 1830747 eth 17/3 Unicast VOQ tail-drop 5969 eth 17/3 Multicast VOQ tail-drop 17809 eth 17/4 Unicast VOQ tail-drop 189479 eth 17/5 Unicast VOQ tail-drop 2025511 eth 17/6 Unicast VOQ tail-drop 2117541 -------------------- EGRESS MCAST TAIL DROP COUNTS: -------------------- ASIC Count ---- ------------------------ 0 142235 1 1400315 2 140656 3 1395476 > switch#
To display the logs that is specific to a QEngine ASIC register, use the show hardware internal qengine inst registers name command.
show hardware internal qengine inst asic-inst-number registers name name
asic-inst-number |
ASIC instance number. |
name name |
Name of the register. |
None
Privileged EXEC mode
Release |
Modification |
---|---|
7.3(0)D1(1) |
This command was introduced |
The command should be executed after attaching to the module.
The following example shows the logs that is specific to the QEngine ASIC register whose name is specified in the command. The below output indicates that on port 11, that is Ethernet 1/11, there is traffic on VL 0, that is -out-q4, and 1, that is out-q5. Each nibble covers 4 VLs or queues. Hence, 2 nibbles are used for 1 port. The UE__0 register covers port 9-12 and the QUE__1 register covers port 13-14.
switch# show hardware internal qengine inst 1 registers name STA_ucr_que +------------------------------------------------------------------------------- | Instance Registers for Queue Driver | Inst 1; port(s) 9-16 | ADDR(0x) REG NAME VAL(0x) [POS] FLD_NAME ________ ________ 43f1 FLN_EB_STA_UCR_QUE__1 00000000 43f2 FLN_EB_STA_UCR_QUE__0 00030000
Command |
Description |
---|---|
show system internal aclqos event-history |
Displays port monitor active policies. |
show hardware internal qengine event-history port |
Displays the QEngine ASIC driver logs. |
To display the QEngine ASIC driver logs, use the show hardware internal qengine event-history port command.
show hardware internal qengine event-history port port-number
port port-number |
Specifies the port number. |
None
Privileged EXEC mode
Release |
Modification |
---|---|
7.3(0)D1(1) |
This command was introduced |
None.
The following example shows how to display the QEngine ASIC driver logs. The below output indicates that shaper on egress is read to be 1% of port bandwidth for stream reservation (SR) Class A that corresponds to qnum 0 on interface Ethernet 1/10 that corresponds to port 10:
switch# show hardware internal qengine event-history port +------------------------------------------------------------------------------- 1) Event:E_DEBUG, length:104, at 286547 usecs after Wed Mar 4 14:44:25 2015 [0] [INFO] fln_que_qos_get_dyn_shaper_cfg(3138): port 10: FS RL rate is 0% for qnum 1, speed 10000 mbps 2) Event:E_DEBUG, length:104, at 284679 usecs after Wed Mar 4 14:44:25 2015 [0] [INFO] fln_que_qos_get_dyn_shaper_cfg(3138): port 10: FS RL rate is 1% for qnum 0, speed 10000 mbps 3) Event:E_DEBUG, length:124, at 910973 usecs after Wed Mar 4 14:26:17 2015 [0] [INFO] fln_que_qos_set_dyn_shaper_cfg(3323): port 10: FS RL update succeeded for qnum 0, rate 1%, port speed 10000 mbps ...
Command |
Description |
---|---|
show system internal aclqos event-history |
Displays port monitor active policies. |
show hardware internal qengine inst registers name |
Displays the output that is specific to QEngine ASIC register. |
To display the hardware queuing drops information, use the show queuing drops command.
show hardware queuing drops ingress egress module module number
ingress |
Displays the ingress drops. |
egress |
Displays the egress drops. |
module |
Displays the queuing drops module information. |
module number |
Displays the module number. The range is from 1 to 10. |
None
Any
Release |
Modification |
---|---|
6.1(2) |
Added the ingress and egress drops. |
6.1(1) |
This command was introduced. |
Egress is only supported on F2 module.
This command does not require a license.
This example shows how to display the hardware queuing drops for ingress:
switch# show hardware queuing drops ingress slot 5 ======= Device: Clipper Xbar Buffer tail drop: SOURCE INTERFACE OVL COUNT ---------------- ----- -------------------------- E5/1 1 10 VOQ drop: SOURCE INTERFACE VQI CCOS COUNT ---------------- ---- ---- -------------------------- E5/1 96 3 20 SPAN drop: SOURCE INTERFACE SESSION COUNT ---------------- ------- --------------------------
This example shows how to display the hardware queuing drops for egress:
switch# show hardware queuing drops egress slot 1 ======= VQ Drops Output VQ* VQ Source Source Input Interface Drops Congestion Module Instance Interface --------- ----- ---------- ------- -------- ---------- E1/2 2 3 8 0 E8/1-4 Egress Buffer Drops Output EB Interface Drops --------- ------ E1/2 4067 * VQ Drops valid on F2E modules only
This example shows how to display the hardware queuing drops module for M2 cards:
switch# show hardware queuing drops ingress module 1 Device: M2 -------------------- INGRESS VOQ DROP COUNTS: -------------------- Source Intf Traffic Type Drop Reason Count ----------- ------------ -------------------- ------------------------ eth 17/1 Unicast VOQ tail-drop 2130695 eth 17/1 Multicast VOQ tail-drop 2077665 eth 17/2 Unicast VOQ tail-drop 1830747 eth 17/3 Unicast VOQ tail-drop 5969 eth 17/3 Multicast VOQ tail-drop 17809 eth 17/4 Unicast VOQ tail-drop 189479 eth 17/5 Unicast VOQ tail-drop 2025511 eth 17/6 Unicast VOQ tail-drop 2117541 -------------------- EGRESS MCAST TAIL DROP COUNTS: -------------------- ASIC Count ---- ------------------------ 0 142235 1 1400315 2 140656 3 1395476 > switch#
Command |
Description |
---|---|
priority-flow-control |
Configures priority flow control (PFC) on an interface. |
To display the status of priority flow control (PFC) on all interfaces, use the show interface priority-flow-control command.
show interface priority-flow-control
This command has no arguments or keywords.
None
Any
Release |
Modification |
---|---|
5.1(1) |
This command was introduced. |
This command does not require a license.
This example shows how to display the status of PFC on all interfaces:
switch# show interface priority-flow-control ===================================== Interface Admin Oper ===================================== Ethernet5/1 Auto Off Ethernet5/2 Auto Off Ethernet5/3 Auto Off Ethernet5/4 Auto Off Ethernet5/5 On On Ethernet5/6 Auto Off Ethernet5/7 Auto Off Ethernet5/8 Auto Off Ethernet5/9 Auto Off Ethernet5/10 Auto Off Ethernet5/11 Auto Off Ethernet5/12 Auto Off Ethernet5/13 Auto Off Ethernet5/14 Auto Off Ethernet5/15 Auto Off Ethernet5/16 Auto Off Ethernet5/17 Auto Off Ethernet5/18 Auto Off Ethernet5/19 Auto Off Ethernet5/20 Auto Off Ethernet5/21 Auto Off --More--
Command |
Description |
---|---|
priority-flow-control |
Configures priority flow control (PFC) on an interface, |
To display the information about the policy, use the show ipv6 local policy command.
show ipv6 local policy
This command has no arguments or keywords.
None
Global command mode
Release |
Modification |
---|---|
6.2(2) |
This command was introduced. |
To use this command Policy Based Routing (PBR) feature must be enabled.
This command does not require a license.
This example shows how to display the information about the policy:
switch# configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# feature pbr switch(config)# show ipv6 local policy Interface Route-map Status VRF-Name switch(config)#
Command |
Description |
---|---|
feature pbr |
Enables Policy Based Routing (PBR) fetaure. |
To display policy maps and statistics, use the show policy-map command.
show policy-map [ type { qos | queuing } ] [policy-map-name]
type |
(Optional) Specifies the component type to display. |
qos |
Specifies the policy maps of the type qos only.It uses L3 MTU (Packet length). For Example, when a packet with length 1000 bytes L2 frame is used, it counts with 18 bytes without tag and 22 bytes less if it is with tag. |
queuing |
Specifies the policy maps of the type queuing only.It uses L2 MTU (Frame length) and counts as a full packet length. |
policy-map-name |
Named policy map. |
None
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
4.0(3) |
The WRR for the type queuing default-in-policy was changed from 50/50 to 80/20. |
When you enter the command show policy-map with no arguments or keywords, the system also displays the Control Plane Policing (CoPP) information.
This command does not require a license.
This example shows how to display a named policy map:
switch(config)# show policy-map abc Type qos policy-maps ==================== policy-map type qos abc class abc set dscp 3 set qos-group 3 set cos dscp table cos-dscp-map class class-default
This example shows how to display all type queuing policy maps:
switch(config)# show policy-map type queuing Type queuing policy-maps ======================== policy-map type queuing q1 class type queuing 8q2t-in-q-default set cos 4 policy-map type queuing default-in-policy class type queuing in-q1 queue-limit percent 50 bandwidth percent 80 class type queuing in-q-default queue-limit percent 50 bandwidth percent 20 policy-map type queuing default-out-policy class type queuing out-pq1 priority level 1 queue-limit percent 16 class type queuing out-q2 queue-limit percent 1 class type queuing out-q3 queue-limit percent 1 class type queuing out-q-default queue-limit percent 82 bandwidth remaining percent 25
Command |
Description |
---|---|
class-map |
Creates or modifies a class map. |
To display policy maps and statistics for the interfaces, use the show policy-map interface command.
show policy-map interface [ ethernet slot /port | port-channel channel-number ] [ input | output ] [ type { qos | queuing } ]
ethernet |
(Optional) Specifies the policy maps that are assigned to Ethernet interfaces. |
slot/port |
Policy maps that are assigned to a specified interface. |
port-channel |
(Optional) Specifies the policy maps that are assigned to port channels. |
channel-number |
Policy maps that are assigned to specified port channel. |
input |
(Optional) Displays policy maps that are assigned to input traffic only. |
output |
(Optional) Displays policy maps that are assigned to output traffic only. |
type |
(Optional) Specifies the component type to display. |
qos |
Specifies the policy maps of the type qos only. |
queuing |
Specifies the policy maps of the type queuing only. |
None.
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
By default, statistics are enabled.
The shared keyword displays the shared queuing status only if shared buffer queuing is enabled and applied.
This command does not require a license.
This example shows how to display policy maps that are assigned to a specified interface:
switch(config)# show policy-map interface ethernet 2/10 Global statistics status : enabled Ethernet2/10 Service-policy (queuing) input: default-in-policy policy statistics status: enabled Class-map (queuing): in-q1 (match-any) queue-limit percent 50 bandwidth percent 50 queue dropped pkts : 0 Class-map (queuing): in-q-default (match-any) queue-limit percent 50 bandwidth percent 80 queue dropped pkts : 0 Service-policy (queuing) output: default-out-policy policy statistics status: enabled Class-map (queuing): out-pq1 (match-any) priority level 1 queue-limit percent 16 queue dropped pkts : 0 Class-map (queuing): out-q2 (match-any) queue-limit percent 1 queue dropped pkts : 0 Class-map (queuing): out-q3 (match-any) queue-limit percent 1 queue dropped pkts : 0 Class-map (queuing): out-q-default (match-any) queue-limit percent 82 bandwidth remaining percent 25 queue dropped pkts : 0
This example shows how to display policy maps that are assigned to a specified interface:
switch(config)# show policy-map interface ethernet 2/2 type qos Global statistics status : enabled Ethernet2/2 Service-policy (qos) input: pmappolicy statistics status: enabled Class-map (qos): map (match-all)1000000 packetsMatch: dscp 46police cir percent 20 bc 200 msconformed 78962304 bytes, 2725540 bps action: transmitviolated 49037696 bytes, 1692633 bps action: drop Class-map (qos): class-default (match-any)1000000 packetspolice cir percent 10 bc 200 msconformed 39481856 bytes, 1362794 bps action: transmitviolated 88518144 bytes, 3055378 bps action: drop
This example shows how to display input queuing policy statistics in the specified interface. The below output indicates the ingress AVB statistics for Stream Reservation (SR) Class A (in-q3) and SR Class B (-in-q4). The field description is self-explanatory.
switch(config)# show policy-map interface Ethernet 1/15 input type queuing Global statistics status : enabled Ethernet1/15 Service-policy (queuing) input: default-8021qav-4q8q-in-policy SNMP Policy Index: 301993025 Class-map (queuing): 8021qav-4q8q-in-q1 (match-any) queue-limit percent 10 bandwidth percent 10 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 65162 queue transmit bytes: 5287504 Class-map (queuing): 8021qav-4q8q-in-q-default (match-any) queue-limit percent 30 bandwidth percent 30 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 180604306 queue transmit bytes: 270903732036 Class-map (queuing): 8021qav-4q8q-in-q3 (match-any) queue-limit percent 30 bandwidth percent 30 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 90301204 queue transmit bytes: 135451806000 Class-map (queuing): 8021qav-4q8q-in-q4 (match-any) queue-limit percent 30 bandwidth percent 30 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 7525100 queue transmit bytes: 11287650000
This example shows how to display input queuing policy statistics in the specified interface. The below output indicates the ingress AVB statistics for Stream Reservation (SR) Class A (in-q3) and SR Class B (-in-q4). The field description is self-explanatory.
switch(config)# show policy-map interface e1/15 output type queuing Global statistics status : enabled Ethernet1/15 Service-policy (queuing) output: default-8021qav-4q8q-out-policy SNMP Policy Index: 301996799 Class-map (queuing): 8021qav-4q8q-out-q1 (match-any) priority level 2 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 0 queue transmit bytes: 0 Class-map (queuing): 8021qav-4q8q-out-q2 (match-any) bandwidth remaining percent 30 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 0 queue transmit bytes: 0 Class-map (queuing): 8021qav-4q8q-out-q3 (match-any) bandwidth remaining percent 30 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 0 queue transmit bytes: 0 Class-map (queuing): 8021qav-4q8q-out-q4 (match-any) priority level 1 shape average percent 0 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 0 queue transmit bytes: 0 Class-map (queuing): 8021qav-4q8q-out-q5 (match-any) priority level 1 shape average percent 0 queue dropped pkts : 63399 queue dropped bytes : 0 queue transmit pkts: 1395 queue transmit bytes: 2137140 Class-map (queuing): 8021qav-4q8q-out-q6 (match-any) bandwidth remaining percent 5 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 0 queue transmit bytes: 0 Class-map (queuing): 8021qav-4q8q-out-q7 (match-any) bandwidth remaining percent 5 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 0 queue transmit bytes: 0 Class-map (queuing): 8021qav-4q8q-out-q-default (match-any) bandwidth remaining percent 30 queue dropped pkts : 0 queue dropped bytes : 0 queue transmit pkts: 3736344 queue transmit bytes: 5715525567
This example shows how to display input queuing policy statistics in the specified port channel.
switch(config)# show policy-map interface port-channel 6 Global statistics status: enabled port-channel6 Service-policy (queuing) input: default-8e-4q8q-in-policy SNMP Policy Index: 301993627 Class-map (queuing): 8e-4q8q-in-q1 (match-any) queue-limit percent 10 bandwidth percent 49 queue dropped pkts: 0 queue dropped bytes: 0 queue transmit pkts: 2175032764 queue transmit bytes: 1051188564890 Class-map (queuing): 8e-4q8q-in-q-default (match-any) queue-limit percent 88 bandwidth percent 49 queue dropped pkts: 0 queue dropped bytes: 0 current depth bytes: 99 queue transmit pkts: 518903560636 queue transmit bytes: 457520859584290
In this example, the current depth bytes field appears because of an active congestion.
The current depth bytes field appears for any physical interface when there is an active congestion and the software reads the counter. The value of the counter must be non zero. The current depth indicates that there are packets waiting in the buffer to be forwarded. The value of the current depth is in bytes.
Command |
Description |
---|---|
class-map |
Creates or modifies a class map. |
To display policy maps applied to interfaces in a brief format, use the show policy-map interface brief command.
show policy-map interface brief
This command has no arguments or keywords.
None
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
This command does not require a license.
This example shows how to display assigned policy maps in a brief format:
switch(config)# show policy-map interface brief Interface/VLAN [Status]:INP QOS OUT QOS INP QUE OUT QUE ================================================================================ port-channel5 [Active]: default-in-po default-out-p port-channel20 [Active]: default-in-po default-out-p port-channel30 [Active]: default-in-po default-out-p port-channel37 [Active]: default-in-po default-out-p port-channel50 [Active]: default-in-po default-out-p Ethernet2/2 [Active]: default-in-po default-out-p Ethernet2/3 [Active]: default-in-po default-out-p ==================================================================================
Command |
Description |
---|---|
show policy-map |
Displays policy maps and statistics. |
To display a report of all policies attached to port groups in a brief format, use the show policy-map port-group brief command.
show policy-map port-group brief
This command has no arguments or keywords.
None
Any command mode
Release |
Modification |
---|---|
6.2(10) |
This command was introduced. |
The policy names displayed in the output correspond to current active templates or user-defined policies that are attached to port-groups.
This command does not require a license.
This example shows how to display a report of policy maps that are attached to port groups:
switch(config)# show policy-map port-group brief Portgroup [Status] INP QUE =========================================== Module 3 port-group 0 [Active] default-4q-7e-in-policy Module 3 port-group 1 [Active] default-4q-7e-in-policy
Command |
Description |
---|---|
show policy-map |
Displays policy maps and statistics. |
To display information about the network qos and queuing policy-maps that are currently in effect on the system, use the show policy-map system command.
show policy-map system
This command has no arguments or keywords.
None
Any command mode
Release |
Modification |
---|---|
6.2(2) |
This command was introduced. |
This command does not require a license.
This example shows how to display the system fabric policy queuing:
switch# show policy-map system Type network-qos policy-maps ============================ policy-map type network-qos default-nq-8e-policy template 8e class type network-qos c-nq-8e match cos 0-7 congestion-control tail-drop mtu 1500 Service-policy input: default-4q-8e-in-policy Service-policy (queuing) input: default-4q-8e-in-policy policy statistics status: disabled (current status: disabled) Class-map (queuing): 2q4t-8e-in-q1 (match-any) queue-limit percent 10 bandwidth percent 50 Class-map (queuing): 2q4t-8e-in-q-default (match-any) queue-limit percent 90 bandwidth percent 50 Service-policy output: default-4q-8e-out-policy Service-policy (queuing) output: default-4q-8e-out-policy policy statistics status: disabled (current status: disabled) Class-map (queuing): 1p3q1t-8e-out-pq1 (match-any) priority level 1 Class-map (queuing): 1p3q1t-8e-out-q2 (match-any) bandwidth remaining percent 33 Class-map (queuing): 1p3q1t-8e-out-q3 (match-any) bandwidth remaining percent 33 Class-map (queuing): 1p3q1t-8e-out-q-default (match-any) bandwidth remaining percent 33 switch#
Commands |
Description |
---|---|
show policy-map |
Displays the policy maps and statistics. |
To display the active type network-qos policy maps, use the show policy-map system type network-qos command.
show policy-map system type network-qos
This command has no arguments or keywords.
None
Any
Release |
Modification |
---|---|
5.1(1) |
This command was introduced. |
This command does not require a license.
This example shows how to display the active type network-qos policy maps:
switch# show policy-map system type network-qos Type network-qos policy-maps ============================ policy-map type network-qos default-nq-4e-policy class type network-qos c-nq-4e-drop match cos 0,5-7 congestion-control tail-drop mtu 1500 class type network-qos c-nq-4e-ndrop-fcoe match cos 3 match protocol fcoe pause mtu 2112 class type network-qos c-nq-4e-ndrop match cos 1-2,4 pause mtu 1500
Command |
Description |
---|---|
show policy-map type network-qos |
Displays the type network qos policy maps. |
show policy-map |
Displays policy maps and statistics. |
To display the type network-qos policy maps, use the show policy-map system type network-qos command.
show policy-map type network-qos
This command has no arguments or keywords.
None
Any
Release |
Modification |
---|---|
5.1(1) |
This command was introduced. |
This command does not require a license.
This example shows how to display the type network-qos policy maps:
switch# show policy-map type network-qos Type network-qos policy-maps ============================ policy-map type network-qos default-nq-4e-policy class type network-qos c-nq-4e-drop congestion-control tail-drop mtu 1500 class type network-qos c-nq-4e-ndrop-fcoe pause mtu 2112 class type network-qos c-nq-4e-ndrop pause mtu 1500 policy-map type network-qos default-nq-6e-policy class type network-qos c-nq-6e-drop congestion-control tail-drop mtu 1500 class type network-qos c-nq-6e-ndrop-fcoe pause mtu 2112 class type network-qos c-nq-6e-ndrop pause mtu 1500 policy-map type network-qos default-nq-7e-policy class type network-qos c-nq-7e-drop congestion-control tail-drop mtu 1500 class type network-qos c-nq-7e-ndrop-fcoe pause mtu 2112 policy-map type network-qos default-nq-8e-policy class type network-qos c-nq-8e congestion-control tail-drop mtu 1500
Command |
Description |
---|---|
show policy-map |
Displays policy maps and statistics. |
To display the queuing policy that you copied and renamed, use the show policy-map type queuing command.
show policy-map type queuing [policy-map-name]
policy-map-name |
The queuing policy that you copied and renamed. |
None
Global configuration mode
Release |
Modification |
---|---|
6.2(2) |
This command was introduced. |
This command does not require a license.
This example shows how to display the queuing policy that you copied and renamed:
switch# configure terminal switch# show policy-map type queuing test Type queuing policy-maps ======================== policy-map type queuing test class type queuing 8q2t-in-q2 class type queuing 8q2t-in-q3 queue-limit dscp 12 percent 50 class type queuing 8q2t-in-q4 switch(config-pmap-que)#
Command |
Description |
---|---|
show policy-map |
Displays policy maps and statistics. |
To display policy maps for the VLANs, use the show policy-map vlan command.
show policy-map vlan[ vlan-id] [ input | output ] [ type { qos | queuing } ]
vlan-id |
(Optional) Policy maps assigned to specified VLAN. |
input |
(Optional) Displays policy maps that are assigned to input traffic only. |
output |
(Optional) Displays policy maps that are assigned to output traffic only. |
type |
(Optional) Specifies the component type to display. |
qos |
Specifies the policy maps of type qos only. |
queuing |
Specifies the policy maps of type queuing only. This keyword is not supported in Release 4.0.1. |
None
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
This command does not require a license.
This example shows how to display policy maps that are assigned to all VLANs:
switch(config)# show policy-map vlan Global statistics status : enabled Vlan 1 Service-policy (qos) input: abc policy statistics status: enabled Class-map (qos): abc (match-all) Match: dscp 0-3 set dscp 3 set qos-group 3 set cos dscp table cos-dscp-map Class-map (qos): class-default (match-any) Service-policy (qos) output: def policy statistics status: enabled
Command |
Description |
---|---|
class-map |
Creates or modifies a class map. |
To display the Data Center Bridging Capability Exchange Protocol (DCBXP) information on all interfaces, use the show qos dcbxp command.
show qos dcbxp { incompatibility [ interface ethernet slot /port-number ] | info }
incompatibility |
(Optional) Specifies the DCBXP incompatibility. |
interface |
(Optional) Specifies the Ethernet interface. |
slot/port-number |
Module number and the port number for which you want to display the incompatibility information. |
info |
(Optional) Specifies the DCBXP information. |
None
Any
Release |
Modification |
---|---|
6.1(2) |
Modified the command output to include iSCSI information. |
5.1(1) |
This command was introduced. |
This command does not require a license.
This example shows how to display the status of DCBXP on all interfaces:
switch# show qos dcbxp info Interface PFC_rcvd/cmptble PG_rcvd/cmptble MTU_rcvd/cmptble FCOE_rcvd/cmptble iSCSI_rvcd/cmptbl ---------------------------------------------------------------------- Ethernet8/1 No/No No/No No/No No/No No/No Ethernet8/2 No/No No/No No/No No/No No/No Ethernet8/3 No/No No/No No/No No/No Yes/Yes Ethernet8/4 No/No No/No No/No No/No No/No switch#
Command |
Description |
---|---|
show interface priority-flow-control |
Displays the status of priority flow control (PFC) on all interfaces. |
To display qos shared policers, use the show qos shared-policer command.
show qos shared policer [ type qos ] [policer-name]
type qos |
(Optional) Specifies the type qos policers. |
policer-name |
(Optional) Specified policer name. |
None
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
This command does not require a license.
This example shows how to display all type qos policers:
switch(config)# show qos shared-policer switch(config)# qos shared-policer foo cir 300 mbps bc 200 ms conform transmit violate drop
Command |
Description |
---|---|
class-map |
Creates or modifies a class map. |
To display queuing information on a specified interface, use the show queuing interface command.
show queuing interface ethernet slot /port summary
ethernet |
Specifies the Ethernet interface. |
slot/port |
Module number and the port number for which you want to display the queuing information. |
summary |
Specifies the summary. |
None
Any command mode
Release |
Modification |
---|---|
6.1(2) |
Modified the command output to include DSP Queuing is not enabled for IPv6 packets. |
6.1(1) |
Added DSCPMap column to track DSCP to IVL changes. Added DSCP to IVL tracking status: Enabled or Disabled. |
4.0 |
This command was introduced. |
This command does not require a license.
This example shows how to display the queuing information for a specified interface:
switch# show queuing interface ethernet 2/9 Egress Queuing for Ethernet2/9 [System] ------------------------------------------- Template: 4Q8E ------------------------------------------------- Que# Group Bandwidth% PrioLevel Shape% CoSMap ------------------------------------------------- 0 0 - High - 5-7 1 1 33 - - 3-4 2 2 33 - - 2 3 3 33 - - 0-1 Ingress Queuing for Ethernet1/1 [System] ------------------------------------------- Trust: Trusted DSCP to Ingress Queue: Enabled ----------------------------------------------------- Que# Group Qlimit% IVL CoSMap DSCPMap ----------------------------------------------------- 0 1 90 0 0-4 0-39 1 0 10 5 5-7 40-63 switch# switch# show queuing interface e7/25 Egress Queuing for Ethernet7/25 [System] ------------------------------------------- Template: 4Q8E ------------------------------------------------- Que# Group Bandwidth% PrioLevel Shape% CoSMap ------------------------------------------------- 0 0 - High - 5-7 1 1 33 - - 3-4 2 2 33 - - 2 3 3 33 - - 0-1 Ingress Queuing for Ethernet7/25 [System] ------------------------------------------- Trust: Trusted DSCP to Ingress Queue : Enabled [*DSCP Queuing is not enabled for IPV6 packets] >>> Do not supposed to show on CR boards. ----------------------------------------------------- Que# Group Qlimit% IVL CoSMap DSCPMap ----------------------------------------------------- 0 1 90 0 0-4 0-39 1 0 10 5 5-7 40-63 This example shows how to display the queuing information for a specified interface and a specified module: switch# show queuing interface ethernet 1/1 module 1 Egress Queuing for Ethernet1/1 [System] ------------------------------------------- Template: 8Q 8021QAV ----------------------------------------------------------------------------- Queue Group Bandwidth% PrioLevel Shape% CoSMap ----------------------------------------------------------------------------- 8021qav-4q8q-out-q4 3 - High 55 3 8021qav-4q8q-out-q5 4 - High 5 2 8021qav-4q8q-out-q6 5 0 - - - 8021qav-4q8q-out-q7 6 0 - - - 8021qav-4q8q-out-q1 0 - Low - 5-7 8021qav-4q8q-out-q2 1 0 - - 4 8021qav-4q8q-out-q3 2 0 - - 1 8021qav-4q8q-out-q-default 7 0 - - 0 Ingress Queuing for Ethernet1/1 [System] ------------------------------------------- Trust: Trusted Shared Queue : Disabled DSCP to Ingress Queue : Disabled ---------------------------------------------------------------------------------------- Queue Group Qlimit% IVL CoSMap EXPMap ---------------------------------------------------------------------------------------- 8021qav-4q8q-in-q-default 1 30 0 0-1,4 0-1,4 8021qav-4q8q-in-q1 0 10 5 5-7 5-7 8021qav-4q8q-in-q4 3 30 2 2 2 8021qav-4q8q-in-q3 2 30 3 3 3
Command |
Description |
---|---|
show class-map type queuing |
Displays information about the class maps type queuing. |
show policy-map type queuing |
Displays information about the policy maps type queuing. |
To display information about the running-system configuration for quality of service (QoS), use the show running-config ipqos command.
show running-config ipqos [all]
all |
(Optional) Displays configured and default information. |
None
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
This command does not require a license.
This example shows how to display QoS information:
switch(config)# show running-config ipqos version 4.0(3) qos statistics class-map type qos match-all abc match dscp 0-3 class-map type qos match-all qqq class-map type qos match-all class1 class-map type qos match-all cmapdef class-map type qos match-all my_test match cos 5 class-map type qos match-all my_class match discard-class 56 class-map type qos match-all class_acl class-map type qos match-all class_protocol class-map conform-color-in class-map conform-color-out class-map exceed-color-in class-map exceed-color-out class-map type queuing match-any 2q4t-in-q1 match cos 5-7 class-map type queuing match-any 2q4t-in-q-default match cos 0-4 class-map type queuing match-any 8q2t-in-q1 match cos 5-7 class-map type queuing match-any 8q2t-in-q2 class-map type queuing match-any 8q2t-in-q3 class-map type queuing match-any 8q2t-in-q4 class-map type queuing match-any 8q2t-in-q5 class-map type queuing match-any 8q2t-in-q6 class-map type queuing match-any 8q2t-in-q7 class-map type queuing match-any 8q2t-in-q-default match cos 0-4 class-map type queuing match-any 1p3q4t-out-pq1 match cos 5-7 class-map type queuing match-any 1p3q4t-out-q2 class-map type queuing match-any 1p3q4t-out-q3 class-map type queuing match-any 1p3q4t-out-q-default match cos 0-4 class-map type queuing match-any 1p7q4t-out-pq1 match cos 5-7 class-map type queuing match-any 1p7q4t-out-q2 class-map type queuing match-any 1p7q4t-out-q3 class-map type queuing match-any 1p7q4t-out-q4 class-map type queuing match-any 1p7q4t-out-q5 class-map type queuing match-any 1p7q4t-out-q6 class-map type queuing match-any 1p7q4t-out-q7 class-map type queuing match-any 1p7q4t-out-q-default match cos 0-4 table-map cir-markdown-map default copy from 10,12 to 12 from 18,20 to 20 from 26,28 to 28 from 34,36 to 36 table-map pir-markdown-map default copy from 10,12 to 14 from 18,20 to 22 from 26,28 to 30 from 34,36 to 38 table-map cos-dscp-map default copy from 0 to 2 table-map cos-precedence-map default copy table-map cos-discard-class-map default copy table-map dscp-cos-map default copy table-map dscp-precedence-map default copy table-map dscp-discard-class-map default copy table-map precedence-cos-map default copy table-map precedence-dscp-map default copy table-map precedence-discard-class-map default copy table-map discard-class-cos-map default copy table-map discard-class-dscp-map default copy table-map discard-class-precedence-map default copy table-map t1 default copy table-map abc default copy table-map my_table1 default copy table-map steve_tm2 default 3 table-map steve_table_map default ignore policy-map type queuing q policy-map type queuing pq class type queuing 8q2t-in-q4 queue-limit cos 3 1000 packets queue-limit cos 4 1000 packets queue-limit 10000 packets policy-map type queuing q1 policy-map type queuing q2 class type queuing 1p3q4t-out-pq1 policy-map type queuing p_q class type queuing 8q2t-in-q4 class type queuing 8q2t-in-q-default set cos 4 policy-map type queuing abcq class type queuing 8q2t-in-q4 policy-map type queuing p_q2 class type queuing 1p7q4t-out-q2 shape average percent 10 policy-map type queuing steve_q class type queuing 1p7q4t-out-pq1 class type queuing 1p7q4t-out-q4 class type queuing 1p7q4t-out-q2 policy-map type queuing my_queue class type queuing 1p3q4t-out-pq1 policy-map type queuing steve_pq1 class type queuing 1p3q4t-out-pq1 policy-map type qos abc class abc switch# show running-config ipqos version 4.0(3) class-map type qos match-all abc match dscp 0-3 class-map type qos match-all qqq class-map type qos match-all class1 class-map type qos match-all cmapdef class-map type qos match-all my_test match cos 5 class-map type qos match-all my_class match discard-class 56 class-map type qos match-all class_acl class-map type qos match-all class_protocol table-map cos-dscp-map default copy from 0 to 2 table-map t1 default copy table-map abc default copy table-map my_table1 default copy table-map steve_tm2 default 3 table-map steve_table_map default ignore policy-map type queuing q policy-map type queuing pq class type queuing 8q2t-in-q4 queue-limit cos 3 1000 packets queue-limit cos 4 1000 packets queue-limit 10000 packets policy-map type queuing q1 policy-map type queuing q2 class type queuing 1p3q4t-out-pq1 policy-map type queuing p_q class type queuing 8q2t-in-q4 class type queuing 8q2t-in-q-default set cos 4 policy-map type queuing abcq class type queuing 8q2t-in-q4 policy-map type queuing p_q2 class type queuing 1p7q4t-out-q2 shape average percent 10 policy-map type queuing steve_q class type queuing 1p7q4t-out-pq1 class type queuing 1p7q4t-out-q4 class type queuing 1p7q4t-out-q2 policy-map type queuing my_queue class type queuing 1p3q4t-out-pq1 policy-map type queuing steve_pq1 class type queuing 1p3q4t-out-pq1 policy-map type qos abc class abc set dscp 3 set qos-group 3 set cos dscp table cos-dscp-map class class-default policy-map type qos def policy-map type qos policy1 class class-default class class1 policy-map type qos polilcy1 policy-map type qos my_policy class class-default policy-map type qos my_policy1 policy-map type queuing my_policy1 class type queuing 1p7q4t-out-q2 policy-map type queuing shape_queue class type queuing 1p3q4t-out-pq1 queue-limit 38984 packets random-detect cos-based policy-map type queuing shape_queues class type queuing 1p3q4t-out-pq1 policy-map type queuing 1p3q4t-out-pq1 policy-map type queuing untrusted_port_cos class type queuing 2q4t-in-q-default interface Ethernet2/4 service-policy type qos input abc service-policy type qos output def service-policy type queuing output q1
Command |
Description |
---|---|
show class-map |
Displays information about class maps. |
show policy-map |
Displays statistics and information about policy maps. |
To display information about the running-system configuration for quality of service (QoS), use the show running-config ipqos command.
show running-config ipqos [all]
all |
(Optional) Displays configured and default information. |
None
Any command mode
Release |
Modification |
---|---|
4.0 |
This command was introduced. |
This command does not require a license.
This example shows how to display QoS information:
switch(config)# show running-config ipqos version 4.0(3) qos statistics class-map type qos match-all abc match dscp 0-3 class-map type qos match-all qqq class-map type qos match-all class1 class-map type qos match-all cmapdef class-map type qos match-all my_test match cos 5 class-map type qos match-all my_class match discard-class 56 class-map type qos match-all class_acl class-map type qos match-all class_protocol class-map conform-color-in class-map conform-color-out class-map exceed-color-in class-map exceed-color-out class-map type queuing match-any 2q4t-in-q1 match cos 5-7 class-map type queuing match-any 2q4t-in-q-default match cos 0-4 class-map type queuing match-any 8q2t-in-q1 match cos 5-7 class-map type queuing match-any 8q2t-in-q2 class-map type queuing match-any 8q2t-in-q3 class-map type queuing match-any 8q2t-in-q4 class-map type queuing match-any 8q2t-in-q5 class-map type queuing match-any 8q2t-in-q6 class-map type queuing match-any 8q2t-in-q7 class-map type queuing match-any 8q2t-in-q-default match cos 0-4 class-map type queuing match-any 1p3q4t-out-pq1 match cos 5-7 class-map type queuing match-any 1p3q4t-out-q2 class-map type queuing match-any 1p3q4t-out-q3 class-map type queuing match-any 1p3q4t-out-q-default match cos 0-4 class-map type queuing match-any 1p7q4t-out-pq1 match cos 5-7 class-map type queuing match-any 1p7q4t-out-q2 class-map type queuing match-any 1p7q4t-out-q3 class-map type queuing match-any 1p7q4t-out-q4 class-map type queuing match-any 1p7q4t-out-q5 class-map type queuing match-any 1p7q4t-out-q6 class-map type queuing match-any 1p7q4t-out-q7 class-map type queuing match-any 1p7q4t-out-q-default match cos 0-4 table-map cir-markdown-map default copy from 10,12 to 12 from 18,20 to 20 from 26,28 to 28 from 34,36 to 36 table-map pir-markdown-map default copy from 10,12 to 14 from 18,20 to 22 from 26,28 to 30 from 34,36 to 38 table-map cos-dscp-map default copy from 0 to 2 table-map cos-precedence-map default copy table-map cos-discard-class-map default copy table-map dscp-cos-map default copy table-map dscp-precedence-map default copy table-map dscp-discard-class-map default copy table-map precedence-cos-map default copy table-map precedence-dscp-map default copy table-map precedence-discard-class-map default copy table-map discard-class-cos-map default copy table-map discard-class-dscp-map default copy table-map discard-class-precedence-map default copy table-map t1 default copy table-map abc default copy table-map my_table1 default copy table-map steve_tm2 default 3 table-map steve_table_map default ignore policy-map type queuing q policy-map type queuing pq class type queuing 8q2t-in-q4 queue-limit cos 3 1000 packets queue-limit cos 4 1000 packets queue-limit 10000 packets policy-map type queuing q1 policy-map type queuing q2 class type queuing 1p3q4t-out-pq1 policy-map type queuing p_q class type queuing 8q2t-in-q4 class type queuing 8q2t-in-q-default set cos 4 policy-map type queuing abcq class type queuing 8q2t-in-q4 policy-map type queuing p_q2 class type queuing 1p7q4t-out-q2 shape average percent 10 policy-map type queuing steve_q class type queuing 1p7q4t-out-pq1 class type queuing 1p7q4t-out-q4 class type queuing 1p7q4t-out-q2 policy-map type queuing my_queue class type queuing 1p3q4t-out-pq1 policy-map type queuing steve_pq1 class type queuing 1p3q4t-out-pq1 policy-map type qos abc class abc switch# show running-config ipqos version 4.0(3) class-map type qos match-all abc match dscp 0-3 class-map type qos match-all qqq class-map type qos match-all class1 class-map type qos match-all cmapdef class-map type qos match-all my_test match cos 5 class-map type qos match-all my_class match discard-class 56 class-map type qos match-all class_acl class-map type qos match-all class_protocol table-map cos-dscp-map default copy from 0 to 2 table-map t1 default copy table-map abc default copy table-map my_table1 default copy table-map steve_tm2 default 3 table-map steve_table_map default ignore policy-map type queuing q policy-map type queuing pq class type queuing 8q2t-in-q4 queue-limit cos 3 1000 packets queue-limit cos 4 1000 packets queue-limit 10000 packets policy-map type queuing q1 policy-map type queuing q2 class type queuing 1p3q4t-out-pq1 policy-map type queuing p_q class type queuing 8q2t-in-q4 class type queuing 8q2t-in-q-default set cos 4 policy-map type queuing abcq class type queuing 8q2t-in-q4 policy-map type queuing p_q2 class type queuing 1p7q4t-out-q2 shape average percent 10 policy-map type queuing steve_q class type queuing 1p7q4t-out-pq1 class type queuing 1p7q4t-out-q4 class type queuing 1p7q4t-out-q2 policy-map type queuing my_queue class type queuing 1p3q4t-out-pq1 policy-map type queuing steve_pq1 class type queuing 1p3q4t-out-pq1 policy-map type qos abc class abc set dscp 3 set qos-group 3 set cos dscp table cos-dscp-map class class-default policy-map type qos def policy-map type qos policy1 class class-default class class1 policy-map type qos polilcy1 policy-map type qos my_policy class class-default policy-map type qos my_policy1 policy-map type queuing my_policy1 class type queuing 1p7q4t-out-q2 policy-map type queuing shape_queue class type queuing 1p3q4t-out-pq1 queue-limit 38984 packets random-detect cos-based policy-map type queuing shape_queues class type queuing 1p3q4t-out-pq1 policy-map type queuing 1p3q4t-out-pq1 policy-map type queuing untrusted_port_cos class type queuing 2q4t-in-q-default interface Ethernet2/4 service-policy type qos input abc service-policy type qos output def service-policy type queuing output q1
Command |
Description |
---|---|
show class-map |
Displays information about class maps. |
show policy-map |
Displays statistics and information about policy maps. |
To display the IP Quality of Service (QOS) statistics for the specified interface, use the show system internal qos queuing stats command.
show system internal qos queuing stats interface ethernet slot /port
interface ethernet slot/port |
Specifies the Ethernet interface. |
None
Privileged EXEC mode.
Release |
Modification |
---|---|
7.3(0)D1(1) |
This command was introduced. |
The following example shows the interface queuing statistics for the specified interface. The field descriptions are self-explanatory.
switch# show system internal qos queuing stats interface ethernet 1/2 Interface Ethernet1/2 statistics Receive queues ---------------------------------------- Queue 8021qav-4q8q-in-q-default Total bytes 0 Total packets 0 Pl Drops 0 Vq Drops 0 Other Drops 0 Queue 8021qav-4q8q-in-q1 Total bytes 1502260 Total packets 20461 Pl Drops 0 Vq Drops 0 Other Drops 0 Queue 8021qav-4q8q-in-q4 Total bytes 141892 Total packets 20178 Pl Drops 0 Vq Drops 0 Other Drops 0 Queue 8021qav-4q8q-in-q3 Total bytes 0 Total packets 0 Pl Drops 0 Vq Drops 0 Other Drops 0 Transmit queues ---------------------------------------- Queue 8021qav-4q8q-out-q4 Total bytes 646287700758 Total packets 6334968852 Eb Drops 0 Other Drops 0 Queue 8021qav-4q8q-out-q5 Total bytes 0 Total packets 0 Eb Drops 0 Other Drops 0 Queue 8021qav-4q8q-out-q6 Total bytes 0 Total packets 0 Eb Drops 0 Other Drops 0 Queue 8021qav-4q8q-out-q7 Total bytes 0 Total packets 0 Eb Drops 0 Other Drops 0 ... Queue 8021qav-4q8q-out-q3 Total bytes 0 Total packets 0 Eb Drops 0 Other Drops 0 Queue 8021qav-4q8q-out-q-default Total bytes 877304 Total packets 2194 Eb Drops 0 Other Drops 0
Command |
Description |
---|---|
show system internal ipqos event-history |
Displays the statistics of IP QOS Manager Message and Text messages. |