The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Switch |
Width |
Depth |
Height |
---|---|---|---|
Cisco Nexus C9316D-GX |
17.2 inches (43.94 cm) |
Without fans - 24 inches (60.98 cm) With fans - 25.4 inches (64.50 cm) |
1.72 inches (4.37 cm) (1 RU) |
Component |
Weight per Unit |
Quantity |
---|---|---|
Cisco Nexus 9316D-GX Chassis (N9K-C9316D-GX) |
Without fans or PSUs - 20.8 lb (9.43 kg) With fans and PSUs - 27.2 lb (12.34 kg) |
1 |
Fan Module – Port-side exhaust (blue) (NXA-FAN-35CFM-PE) – Port-side intake (burgundy) (NXA-FAN-35CFM-PI) |
— 0.6 lb (0.3 kg) 0.6 lb (0.3 kg) |
3 |
Power Supply module – 1100-W AC port-side exhaust (blue) (NXA-PAC-1100W-PE2) – 1100-W AC port-side intake (burgundy) (NXA-PAC-1100W-PI2) – 1100-W HVAC/HVDC port-side exhaust (blue) (NXA-PUV-1100W-PE) – 1100-W HVAC/HVDC port-side intake (burgundy) (NXA-PUV-1100W-PI) – 1100-W DC port-side exhaust (blue) (NXA-PDC-1100W-PE) – 1100-W DC port-side intake (burgundy) (NXA-PDC-1100W-PI) |
— 2.42 lb (1.1 kg) |
2 (1 for operations and 1 for redundancy) |
To determine which transceivers, adapters, and cables are supported by this switch, see https://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see https://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
The following table lists the typical amount of power that the switch consumes. It also lists the maximum amount of power that you must provision for the switch and power supply for peak conditions.
Note |
Some power supplies have UL listed capabilities that are greater than the maximum power requirements for a switch. To determine the power consumption characteristics for the switch, use the typical and maximum requirements that are listed in the following table. |
Switch | Typical Power Consumption (AC or DC) | Maximum Power Consumption (AC or DC) | Heat Dissipation Requirement |
---|---|---|---|
Cisco Nexus C9316D-GX |
420 W |
1010 W |
3,466.22 BTUs per hour |
Power specifications include the specifications for each type of power supply module.
These specifications apply to all versions of the NXA-PAC-1100W power supply
Characteristic | Specification |
---|---|
AC input voltage |
Nominal range: 100 and 240 VAC (Range: 90-132 VAC, 180-264 VAC) |
AC input frequency |
Nominal range: 50 to 60 Hz (Range: 47-63 Hz) |
Maximum AC input current |
13 A at 100 VAC 6 A at 240 VAC |
Maximum input volt-amperes |
1300 VA at 100 VAC |
Maximum output power per power supply |
1100 W |
Maximum inrush current |
33 A |
Maximum hold-up time |
12 ms at 1100 W |
Power supply output voltage |
12 VDC |
Power supply standby voltage |
12 VDC |
Efficiency rating |
Climate Savers Platinum Efficiency (80Plus Platinum certified) |
Form factor |
RSP1 |
These specifications apply to the following power supplies:
NXA-PHV-1100W-PE
NXA-PHV-1100W-PI
Characteristic | Specification |
---|---|
Efficiency |
94% |
Input voltage |
100VAC – 277VAC, 240VDC – 380VDC |
Nominal frequency |
50, 60Hz |
Maximum input current |
100-277VAC 13A Max, 240VDC – 380VDC 5.5A Max |
Maximum inrush current |
35A (cold turn on); 50A (hot turn on) |
Maximum continuous total output power |
1100W @ 100 – 277VAC, 240VDC – 380VDC |
Output voltage |
12V/ 90A |
Standby output voltage |
3.3V/ 3A |
Efficiency |
80 Plus Platinum |
These specifications apply to the following power supplies:
NXA-PDC-1100W-PE
NXA-PDC-1100W-PI
Characteristic | Specification |
---|---|
DC input voltage range |
Nominal range: -54VDC (Range: -40 to -72 VDC) |
Maximum DC input current |
32 A at -40 VDC |
Maximum output power per power supply |
1100 W |
Maximum inrush current |
90 A (cold turn on) |
Maximum hold-up time |
4 ms at 100% load |
Power supply output voltage |
12 V/ 90A |
Power supply standby voltage |
3.3 V/ 3A |
Efficiency rating @ -48VDC |
94% at 50% load |
The following sections specify the power cables that you can order and use with this switch.
Locale | Power Cord Part Number | Cord Set Description |
---|---|---|
CAB-C13-C14-2M |
Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m) |
|
CAB-C13-CBN |
Cabinet jumper power cord, 250 VAC, 10 A, C14-C13 connectors, 2.3 feet (0.7 m) |
|
Argentina |
CAB-250V-10A-AR |
250 V, 10 A, 8.2 feet (2.5 m) |
Australia |
CAB-9K10A-AU |
250 VAC, 10 A, 3112 plug, 8.2 feet (2.5 m) |
Brazil |
CAB-250V-10A-BR |
250 V, 10 A, 6.9 feet (2.1 m) |
European Union |
CAB-9K10A-EU |
250 VAC, 10 A, CEE 7/7 plug, 8.2 feet (2.5 m) |
India |
CAB-IND-10A |
10 A, 8.2 feet (2.5 m) |
India |
CAB-C13-C14-2M-IN |
Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m) |
India |
CAB-C13-C14-3M-IN |
Power Cord Jumper, C13-C14 Connectors, 9.8 feet (3.0 m) |
Israel |
CAB-250V-10A-IS |
250 V, 10 A, 8.2 feet (2.5 m) |
Italy |
CAB-9K10A-IT |
250 VAC, 10 A, CEI 23-16/VII plug, 8.2 feet (2.5 m) |
Japan |
CAB-C13-C14-2M-JP |
Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m) |
North America |
CAB-9K12A-NA |
125 VAC, 13 A, NEMA 5-15 plug, 8.2 feet (2.5 m) |
North America |
CAB-AC-L620-C13 |
NEMA L6-20-C13, 6.6 feet (2.0 m) |
North America |
CAB-N5K6A-NA |
200/240V, 6A, 8.2 feet (2.5 m) |
Peoples Republic of China |
CAB-250V-10A-CN |
250 V, 10 A, 8.2 feet (2.5 m) |
South Africa |
CAB-250V-10A-ID |
250 V, 10 A, 8.2 feet (2.5 m) |
Switzerland |
CAB-9K10A-SW |
250 VAC, 10 A, MP232 plug, 8.2 feet (2.5 m) |
United Kingdom |
CAB-9K10A-UK |
250 VAC, 10 A, BS1363 plug (13 A fuse), 8.2 (2.5 m) |
All except Argentina, Brazil, and Japan |
NO-POWER-CORD |
No power cord included with switch |
Part Number |
Cord Set Description |
Photo |
---|---|---|
CAB-HVAC-SD-0.6M |
HVAC 2-foot (0.6 m) cable with Saf-D-Grid and SD connectors 277V AC |
|
CAB-HVAC-C14-2M |
HVAC 6.6-foot (2.0 m) cable with Saf-D-Grid and C14 (use for up to 240 V) connector 250V AC |
|
CAB-HVAC-RT-0.6M |
HVAC 2-foot (0.6 m) cable with Saf-D-Grid and RT connector 277V AC |
|
CAB-HVDC-3T-2M |
HVDC 6.6-foot (2.0 m) cable with Saf-D-Grid and three terminal connectors 300V AC / 400V DC (+200/-200 V DC) |
|
NO-POWER-CORD |
All except Argentina, Brazil, and Japan No power cord included with switch |
Not applicable |
1 |
Connect this end to the power supply unit. |
Part Number |
Description |
Photo |
---|---|---|
NXA-PDC-1100W-PE/PI |
The 1100W DC power supply (NXA-PDC-1100W-PE/PI) is shipped with a connector already plugged into the power supply. Use 8 AWG wire with the minimum input voltage of 40VDC, based on maximum current and thermal derating. |
The following table lists the regulatory standards compliance for the switch.
Specification |
Description |
---|---|
Regulatory compliance |
Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC. |
Safety |
|
EMC: Emissions |
|
EMC: Immunity |
|
RoHS |
The product is RoH-6 compliant with exceptions for leaded-ball grid-array (BGA) balls and lead press-fit connectors. |