New Commands
The following commands are added in this release.
-
clear sup-monitor drops session <session_number> [ module <module> ]
-
[ no ] collect { egress buffer depth }
-
[ no ] collect { egress pool-group depth }
-
[ no ] collect { egress queue depth | egress queue drops | egress queue microburst | egress queue peak | egress queue average-depth }
-
[ no ] collect { ethernet counters }
-
[ no ] collect { ingress queue depth | ingress queue drops }
-
[ no ] feature signature-verification
-
[ no ] hardware-telemetry ssx
-
[ no ] ignore routable
-
[ no ] ingress-mtu <mtu_value>
-
{ [ no ] debug | undebug } ip nat-packet
-
[ no ] ip pim evpn-border-leaf
-
[ no ] nexthop suppress-default-resolution
-
[ no ] nxapi ssl ciphers weak
-
[ no ] nxapi ssl protocols <prot_string>
-
[ no ] per-ingress-port-mtu-mode
-
[ no ] port-channel fast-convergence
-
[ no ] qos-mode pipe
-
[ no ] system module failure-action shutdown multibit-parity
-
[ no ] system shutdown fans 2
-
test hardware internal ptp sync-cpu-asic
-
[ no ] transport udp { src-port <srcport> dst-port <dstport> | dst-port <dstport> src-port <srcport> | src-port <srcport> | dst-port <dstport> }
-
show consistency-checker racl svi interface <vlan-id>
-
show forwarding distribution multicast vxlan dsg-db
-
show interface <ifeth_ctr> counters [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]
-
show interface <ifeth_ctr> counters snmp [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]
-
show port-channel fast-convergence
-
show ssx details [ __readonly__ [ TABLE_ssx_details <arp-timer-running><asic-instance><asic-slice><io-srcid> [ <packets-sent> ] ] ]
-
show ssx exporter { all | <exportername> } [ __readonly__ [ TABLE_ssx_exporters <exporter-name> <src-ip><src-udp-port><dest-ip><dest-udp-port><vrf><mtu><dscp> ] ]
-
show ssx monitor { all | <monitorname> } [ __readonly__ [ TABLE_ssx_monitors <monitor-name> <globally-applied><status><exportername><recordname> ] ]
-
show ssx record { all | <recordname> } [ __readonly__ [ TABLE_ssx_records <record-name> [ TABLE_stats_type <stats-type> ] <interval> ] ]
-
show sup-monitor drops session <session_number> [ module <module> ]
-
show system image-verification
-
show ttag brief [ __readonly__ { [ TABLE_ttag <ttag-ifindex> <state> ] } <ttag-end> ]