Chapter 1. Notice

- Notice

Notice

Warning

This document should be used only as a glossary reference for possible commands. The listing of a command in this document does not guarantee that the command is available or supported for your platform or application.

The command information in this reference document is auto-generated from the NX-OS source code. While we attempt to manually remove unsupported, deprecated, or internal-use commands, such commands may occasionally appear in this document. Also, with the large variety of hardware platform combinations using NX-OS software, some listed commands may not be applicable or recommended for a specific platform. Platform-based dependency information is not provided in this command reference.

We strongly encourage you to refer to the configuration guides for appropriate commands to configure and operate a feature. Command limitations, restrictions, and recommendations are documented only in the configuration guides. When in doubt, please consult your Cisco representative.

Part I. All Show Commands

- A Show Commands

- B Show Commands

- C Show Commands

- D Show Commands

- E Show Commands

- F Show Commands

- G Show Commands

- H Show Commands

- I Show Commands

- K Show Commands

- L Show Commands

- M Show Commands

- N Show Commands

- O Show Commands

- P Show Commands

- Q Show Commands

- R Show Commands

- S Show Commands

- T Show Commands

- U Show Commands

- V Show Commands

- W Show Commands

- X Show Commands

Chapter 2. A Show Commands

- show aaa accounting

- show aaa authentication

- show aaa authentication login

- show aaa authentication login ascii-authentication

- show aaa authentication login error-enable

- show aaa authentication login invalid-username-log

- show aaa authentication login password-aging

- show aaa authorization

- show aaa bypass-user

- show aaa groups

- show aaa local user blocked

- show aaa user default-role

- show access-list

- show access-list database

- show access-list resource

- show access-lists

- show access-lists

- show accounting log

- show accounting log all

- show accounting log last-index

- show accounting log nvram

- show accounting log nvram last-index

- show accounting log nvram start-seqnum

- show accounting log start-seqnum

- show acl status

- show amt process

- show amt vrf all

- show archive log config

- show arp access-lists

show aaa accounting

show aaa accounting [ __readonly__ [ TABLE_acctMethods <service> <methods> ] ]

Syntax Description

show

Show running system information

aaa

Show aaa information

accounting

Show accounting configuration

__readonly__

(Optional)

TABLE_acctMethods

(Optional)

service

(Optional) service type

methods

(Optional) Accounting methods configured for the application

Command Mode

- /exec

show aaa authentication

show aaa authentication [ __readonly__ [ TABLE_AuthenMethods <service> <method> ] ]

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

__readonly__

(Optional)

TABLE_AuthenMethods

(Optional)

service

(Optional) Service for which authentication is needed

method

(Optional) Authentication method used for the service

Command Mode

- /exec

show aaa authentication login

show aaa authentication login { mschap | mschapv2 | chap } [ __readonly__ [ <mschap_status> ] [ <mschapv2_status> ] [ <chap_status> ] ]

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login error message configuration

mschap

Show authentication login MSCHAP enable configuration

mschapv2

Show authentication login MSCHAP V2 enable configuration

chap

Show authentication login CHAP enable configuration

__readonly__

(Optional)

mschap_status

(Optional) mschap enabled or disabled

mschapv2_status

(Optional) mschapv2 enabled or disabled

chap_status

(Optional) chap enabled or disabled

Command Mode

- /exec

show aaa authentication login ascii-authentication

show aaa authentication login ascii-authentication [ __readonly__ { <ascii_authen_status> } ]

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login message configuration

ascii-authentication

Show ascii-authentication configuration

__readonly__

(Optional)

ascii_authen_status

(Optional) ascii authentication status

Command Mode

- /exec

show aaa authentication login error-enable

show aaa authentication login error-enable [ __readonly__ [ <status> ] ]

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login error message configuration

error-enable

Show authentication login error message enable configuration

__readonly__

(Optional)

status

(Optional) login error-enable enabled or disabled

Command Mode

- /exec

show aaa authentication login invalid-username-log

show aaa authentication login invalid-username-log [ __readonly__ [ <status> ] ]

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login message configuration

invalid-username-log

Show invalid username log configuration

__readonly__

(Optional)

status

(Optional) login invalid-username-log enabled or disabled

Command Mode

- /exec

show aaa authentication login password-aging

show aaa authentication login password-aging [ __readonly__ { <passwordAging_status> } ]

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login error message configuration

password-aging

Show password-aging enable configuration

__readonly__

(Optional)

passwordAging_status

(Optional) login password-aging

Command Mode

- /exec

show aaa authorization

show aaa authorization [ all ] [ __readonly__ [ <pki_ssh_cert_author> <pki_ssh_pubkey_author> ] [ TABLE_cmd_methods <appl_subtype> <cmd_type> <methods> ] [ TABLE_app_methods <appl> <methods> ] ]

Syntax Description

show

Show running system information

aaa

Show aaa information

authorization

Show authorization configuration

all

(Optional) Show all(include defaults configurations) authorization info

__readonly__

(Optional)

pki_ssh_cert_author

(Optional)

pki_ssh_pubkey_author

(Optional)

TABLE_cmd_methods

(Optional) table containing command authorization methods

appl_subtype

(Optional)

cmd_type

(Optional)

methods

(Optional)

TABLE_app_methods

(Optional) table containing application authorization methods

appl

(Optional)

methods

(Optional)

Command Mode

- /exec

show aaa bypass-user

show aaa bypass-user [ <s0> ] [ __readonly__ [ <num_bypass_users> ] [ TABLE_bypassUsers <username> <account> <author> ] ]

Syntax Description

show

Show running system information

aaa

Show aaa information

bypass-user

Show bypass user information

s0

(Optional) Enter the username

__readonly__

(Optional)

num_bypass_users

(Optional) Number of bypass users configured

TABLE_bypassUsers

(Optional)

username

(Optional) Username

account

(Optional) Accounting Bypass

author

(Optional) Authorization bypass

Command Mode

- /exec

show aaa groups

show aaa groups [ __readonly__ { TABLE_groups <group> } ]

Syntax Description

show

Show running system information

aaa

Show aaa information

groups

Show configured groups

__readonly__

(Optional)

TABLE_groups

(Optional) Table showing aaa groups

group

(Optional) Name of the group

Command Mode

- /exec

show aaa local user blocked

show aaa local user blocked [ __readonly__ { TABLE_sessions <u_name> <u_state> } ]

Syntax Description

show

Show running system information

aaa

Configure aaa functions

local

Local username

user

Local system user

blocked

Display Blocked users

__readonly__

(Optional)

TABLE_sessions

(Optional) aaa local users blocked table

u_name

(Optional) Name of the user

u_state

(Optional) State of the user

Command Mode

- /exec

show aaa user default-role

show aaa user default-role [ __readonly__ { default_role_status <udr_status> } ]

Syntax Description

show

Show running system information

aaa

Show aaa information

user

Remotely authenticated user

default-role

Default role assigned by aaa-admin for remote authentication

__readonly__

(Optional)

default_role_status

(Optional) user default role status

udr_status

(Optional) Status of user default role

Command Mode

- /exec

show access-list

show { system internal | hardware } access-list { summary | [ vdc <vdc_id> ] { [ interface <if_name> | vlan <vlan_id> | inband table <table> ] [ { input | output } { config | { { entries | merge } [ detail ] } | statistics | l4ops | redirect | sampler } ] } } [ module <module> ] [ __readonly__ <type> <feature> <plcy_id> <src_ip> <src_mask> <dst_ip> <dst_mask> <proto> <l4ops> <action> <mac> <cos> <vlan> <l2_proto> <ethertype> [ TABLE_vdc <vdc-no> <vdc-type> <dir> <policy-type> <policy-id> <policy-name> ] [ TABLE_instance <inst> [ TABLE_tcam_resource_usage <tcam-no> <lbl> <hw-lbl-id> <bank> ] [ TABLE_class <class-type> <policies> <netflow-profile> <netflow-deny-profile> <tcam-entries> ] <l4-protocol-cam-entries> <mac-etype-proto-cam-entries> <lous> <tcp-flags-table-entries> <adjacency-entries> ] ]

Syntax Description

show

Show running system information

system

System-related show commands

internal

Commands for internal use

hardware

Show hardware information

access-list

Access Control List

summary

summary

vdc

(Optional) vdc id

vdc_id

(Optional) vdc_id

interface

(Optional) interface name

if_name

(Optional) display access list for the interface

vlan

(Optional) vlan_id

vlan_id

(Optional) vlan_id

inband

(Optional) inband interface

table

(Optional) vrf table number

table

(Optional) vrf table number

input

(Optional) input/ingress policies

output

(Optional) output/egress policies

config

(Optional) parsed policy software database

entries

(Optional) tcam entries

statistics

(Optional) aggregate statistics

l4ops

(Optional) l4 operations information

redirect

(Optional) redirect resource information

sampler

(Optional) with sampler details

merge

(Optional) tcam entries merge information

detail

(Optional) detailed information

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional)

type

(Optional) policy type eg: ACL, QOS

feature

(Optional) feature type eg: RACL, VACL

plcy_id

(Optional) policy id

src_ip

(Optional) src ipv4 address

src_mask

(Optional) src mask

dst_ip

(Optional) dst ipv4 address

dst_mask

(Optional) dst mask

proto

(Optional) protocol eg: TCP, UDP ...

l4ops

(Optional) layer 4 operations

action

(Optional) action

mac

(Optional) mac address

cos

(Optional) acos value

vlan

(Optional) vlan id

l2_proto

(Optional) L2 protocol

ethertype

(Optional) ethertype

TABLE_vdc

(Optional) show for vdc

vdc-no

(Optional) vdc number

vdc-type

(Optional) VDC type-COPP etc

dir

(Optional) Policy Direction

policy-type

(Optional) Policy type

policy-id

(Optional) Policy id

policy-name

(Optional) Policy name

TABLE_instance

(Optional) show for an instance

inst

(Optional) instance number

TABLE_tcam_resource_usage

(Optional) TCAM resource usage

tcam-no

(Optional) tcam number

lbl

(Optional) lbl name

hw-lbl-id

(Optional) hw lbl id

bank

(Optional) bank number

TABLE_class

(Optional) table class

class-type

(Optional) Class type

policies

(Optional) Policy name

netflow-profile

(Optional) Netflow Profile

netflow-deny-profile

(Optional) Netflow Deny Profile

tcam-entries

(Optional) No. of TCAM entries

l4-protocol-cam-entries

(Optional) L4 protocol cam entries

mac-etype-proto-cam-entries

(Optional) No. of mac etype/proto cam entries

lous

(Optional) No. of LOU's

tcp-flags-table-entries

(Optional) No. of CP flags table entries

adjacency-entries

(Optional) No. of adjacency entries

Command Mode

- /exec

show access-list database

show { system internal | hardware } access-list [ vdc <vdc_id> ] database { interface | vlan | policy | process } [ module <module> ] [ __readonly__ <if_idx> <vlan> <plcy_id> <process_info> ]

Syntax Description

show

Show running system information

system

System-related show commands

internal

Commands for internal use

hardware

Show hardware information

access-list

Access Control List

vdc

(Optional) vdc id

vdc_id

(Optional) vdc_id

database

Show memory database

interface

display interfaces/vlans in a vdc with policies

policy

display policies in a vdc

vlan

display vlans in a vdc

process

display process database in a vdc

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional)

if_idx

(Optional) interface

vlan

(Optional) vlan

plcy_id

(Optional) policy id

process_info

(Optional) process information

Command Mode

- /exec

show access-list resource

show { system internal | hardware } access-list resource { { { entries | l4ops | redirect | ipv6-compression | mac-compression | aqm-d | aqm-q | oq | opool | prm | hardware-telemetry } [ detail ] } | utilization [ per-feature ] | { entry tcam <tcam_id> bank <bank_id> index <index> } | { default-tcam-allocation } } [ no-header ] [ module <module> ] [ __readonly__ [ TABLE_instance <inst> [ TABLE_resource_util_info <resource_hdr> <ents_use> [ <ents_free> ] [ <ents_pctage> ] ] ] ]

Syntax Description

show

Show running system information

system

System-related show commands

internal

Commands for internal use

hardware

Show hardware information

access-list

Access Control List

resource

hardware resource

entries

tcam entries

l4ops

l4 operations information

redirect

redirect resource information

entry

display hardware information of a tcam entry

tcam

tcam id

tcam_id

tcam_id

bank

bank id

bank_id

bank_id

index

index within bank

index

index withing bank

default-tcam-allocation

default tcam allocation

utilization

utilization matrix

per-feature

(Optional) feature wise utilization

ipv6-compression

ipv6 compression

mac-compression

mac compression table info

aqm-d

aqm d params

aqm-q

aqm q params

oq

oq profiles

opool

opool profiles

prm

prm profiles

hardware-telemetry

hardware-telemetry resources

detail

(Optional) detailed information

no-header

(Optional) Do not print header

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional)

TABLE_instance

(Optional) show for an instance

inst

(Optional) instance number

TABLE_resource_util_info

(Optional) resource utilization information

resource_hdr

(Optional) resource header

ents_use

(Optional) entries in use

ents_free

(Optional) free tcam entries

ents_pctage

(Optional) tcam entries usage percentage

Command Mode

- /exec

show access-lists

show <mpls_acl> access-lists [ <mpls_name> ] [ __readonly__ TABLE_mpls <mpls_name> [ <statistics> ] [ TABLE_seqno <seqno> { <permitdeny> <mpls> [ <mpls_option> ] { <label1_any> | { <label1> [ mask <label1_mask> ] } } [ <label2_any> | { <label2> [ mask <label2_mask> ] } ] [ <label3_any> | { <label3> [ mask <label3_mask> ] } ] [ <label4_any> | { <label4> [ mask <label4_mask> ] } ] <mplsaction> <mplsactionid> } | <remark> ] ]

Syntax Description

show

Show running system information

mpls_acl

mpls acl value

access-lists

List access lists

mpls_name

(Optional) List name

__readonly__

(Optional)

mpls_name

(Optional) Name of the MPLS ACL

seqno

(Optional) Sequence number

permitdeny

(Optional) Permit/deny

mplsaction

(Optional) mpls ACL Action

mplsactionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

statistics

(Optional) STATISTICS

mask

(Optional) mask

label1

(Optional) mpls label one

label2

(Optional) mpls label two

label3

(Optional) mpls label three

label4

(Optional) mpls label three

label1_mask

(Optional) mpls label one mask

label2_mask

(Optional) mpls label two mask

label3_mask

(Optional) mpls label three mask

label4_mask

(Optional) mpls label four mask

label1_any

(Optional) label one Any

label2_any

(Optional) label two Any

label3_any

(Optional) label three Any

label4_any

(Optional) label four Any

mpls

(Optional) mpls keyword

mpls_option

(Optional) mpls option

TABLE_mpls

(Optional)

TABLE_seqno

(Optional)

remark

(Optional) Remark String

Command Mode

- /exec

show access-lists

show [ <ip_ipv6_mac> ] access-lists [ <name> ] [ capture session <capture_session> ] [ <expanded> | <summary> | <private> | <brief> | <stats-detail> ] [ __readonly__ TABLE_ip_ipv6_mac <op_ip_ipv6_mac> <show_summary> <acl_name> [ <statistics> ] [ <frag_opt_permit_deny> ] [ <global_capture_session> ] [ TABLE_seqno <seqno> { <permitdeny> [ <proto_str> | <proto> | <ip> | <ipv6> ] { <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_ipv6_addr> <src_ipv6_mask> | <mac_src> <mac_src_wild> | <src_addrgrp> } [ <src_port_op> [ <src_port1_str> ] { <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_ipv6_addr> <dest_ipv6_mask> | <mac_dest> <mac_dest_wild> | <dest_addrgrp> } [ <dest_port_op> [ <dest_port1_str> ] { <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] [ <igmp_type> | <igmp_type_str> ] [ [ <precedence> | <precedence_str> ] [ <tos> | <tos_str> ] | [ <dscp> | <dscp_str> ] | [ <ttl> ] ] [ <log> ] [ <udfs> ] [ <capture_session> ] [ <fragments> ] [ <plen_op> <plen1> [ <plen2> ] ] [ <urg> ] [ <ack> ] [ <psh> ] [ <rst> ] [ <syn> ] [ <fin> ] [ <established> ] [ <http-method> | <http_opt_str> ] [ <tcp-option-length> ] [ <tcp-flags-mask> ] [ <flow_label> ] [ <timerange> ] [ <eth_proto> | <eth_proto_str> ] [ <vlan> ] [ <cos> ] [ <match_count> ] | [ TABLE_match <module> <module_match_count> ] | [ <nve_vni> ] | <remark> [ <action> <actionid> ] } ] [ ethertype <ethertypeid> | vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ <action> <actionid> ] [ [ <stats_enabled> ] [ <frag_option> ] { <num_ace> } { <conf_if_header> } [ <conf_if> ] { <active_if_header> } [ <active_if> ] ] ]

Syntax Description

show

Show running system information

name

(Optional) List name

ip_ipv6_mac

(Optional) IP/IPv6/MAC

capture

(Optional) capture

session

(Optional) session

capture_session

(Optional) session id

op_ip_ipv6_mac

(Optional) IP/IPv6/MAC

access-lists

List access lists

show_summary

(Optional)

acl_name

(Optional) List name

__readonly__

(Optional)

TABLE_ip_ipv6_mac

(Optional)

frag_opt_permit_deny

(Optional) frag_op_type

ethertype

(Optional) Configure match based on ethertype

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

ethertypeid

(Optional) Configure the ethertype value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

seqno

(Optional) Sequence number

permitdeny

(Optional) Permit/deny

proto

(Optional) A protocol number

TABLE_seqno

(Optional)

proto_str

(Optional) Protocol name

ip

(Optional) IP

ipv6

(Optional) IPV6

src_any

(Optional) SRCAny

dest_any

(Optional) DESTAny

src_ip_prefix

(Optional) Source IP prefix

src_ip_addr

(Optional) Source IP address

src_ip_mask

(Optional) Source IP mask

mac_src

(Optional) Source MAC address

mac_src_wild

(Optional) Source MAC mask

dest_ip_prefix

(Optional) Destination IP prefix

dest_ip_addr

(Optional) Destination IP address

dest_ip_mask

(Optional) Destination IP mask

mac_dest

(Optional) Destination MAC address

mac_dest_wild

(Optional) Destination MAC mask

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port1_str

(Optional) Source port name

src_port1_num

(Optional) Source port number

src_port2_str

(Optional) Source port name

src_port2_num

(Optional) Source port number

dest_port1_str

(Optional) Destination port name

dest_port1_num

(Optional) Destination port number

dest_port2_str

(Optional) Destination port name

dest_port2_num

(Optional) Destination port number

icmp_type

(Optional) ICMP type

icmp_code

(Optional) ICMP code

icmp_str

(Optional) ICMP message

icmpv6_type

(Optional) ICMP type

icmpv6_code

(Optional) ICMP code

icmpv6_str

(Optional) ICMP message

igmp_type

(Optional) IGMP type

igmp_type_str

(Optional) IGMP type String

precedence

(Optional) precedence

precedence_str

(Optional) precedence string

tos

(Optional) tos

tos_str

(Optional) tos string

dscp

(Optional) dscp

dscp_str

(Optional) dscp string

udfs

(Optional) udfs string

ttl

(Optional) ttl

capture_session

(Optional) capture session

global_capture_session

(Optional) capture session

log

(Optional) Log

fragments

(Optional) Fragments

urg

(Optional) URG

ack

(Optional) ACK

psh

(Optional) PSH

rst

(Optional) RST

syn

(Optional) SYN

fin

(Optional) FIN

established

(Optional) ESTABLISHED

http-method

(Optional) http-method

http_opt_str

(Optional) http_option string

tcp-option-length

(Optional) TCP Option size

tcp-flags-mask

(Optional) TCP Flags mask

flow_label

(Optional) IPv6 flow label

timerange

(Optional) Time-range

eth_proto

(Optional) MAC protocol number

eth_proto_str

(Optional) MAC protocol name

vlan

(Optional) VLAN number

cos

(Optional) CoS value

match_count

(Optional) Number of packets matching the ACL

TABLE_match

(Optional)

module

(Optional) Module name

module_match_count

(Optional) Number of packets matching the ACL per module

nve_vni

(Optional) nve vni

remark

(Optional) Remark String

statistics

(Optional) STATISTICS

src_addrgrp

(Optional) Source address group

dest_addrgrp

(Optional) Destination address group

src_portgrp

(Optional) Source port group

dest_portgrp

(Optional) Destination port group

plen_op

(Optional) Source Port operator

plen1

(Optional) Packet length minimum

plen2

(Optional) packet length maximum

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

stats_enabled

(Optional)

frag_option

(Optional)

num_ace

(Optional) Total number of ACEs

conf_if_header

(Optional)

conf_if

(Optional) Configured Interfaces

active_if_header

(Optional)

active_if

(Optional) Active interfaces

expanded

(Optional) EXPANDED

summary

(Optional) SUMMARY

private

(Optional) PRIVATE

brief

(Optional) BRIEF

stats-detail

(Optional) STATS-DETAIL

Command Mode

- /exec

show accounting log

show accounting log [ { <i0> | start-time <SYYYY> <SMonth> <SDate> <STime> [ end-time <EYYYY> <EMonth> <EDate> <ETime> ] } ] [ __readonly__ [ TABLE_acctlog_time <accountlog_starttime> ] ]

Syntax Description

show

Show running system information

accounting

Show Accounting Information

log

Show Accounting Log

i0

(Optional) Log Size(in bytes)

start-time

(Optional) Show messages from a given start-time

SYYYY

(Optional) Enter year in YYYY format

SMonth

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

SDate

(Optional) Enter day of month in dd format

STime

(Optional) Enter hour, minutes, seconds as HH:MM:SS

end-time

(Optional) Show messages from a given end-time

EYYYY

(Optional) Enter year in YYYY format

EMonth

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

EDate

(Optional) Enter day of month in dd format

ETime

(Optional) Enter hour, minutes, seconds as HH:MM:SS

__readonly__

(Optional)

TABLE_acctlog_time

(Optional)

accountlog_starttime

(Optional) accounting log starttime

Command Mode

- /exec

show accounting log all

show accounting log all [ __readonly__ [ TABLE_acctlog <accountlog_all> ] ]

Syntax Description

show

Show running system information

accounting

Show accounting configuration

log

Show Accounting Log

all

Display accounting log including show commands (Use <terminal log-all> to enable show command accounting)

__readonly__

(Optional)

TABLE_acctlog

(Optional)

accountlog_all

(Optional) accounting log all

Command Mode

- /exec

show accounting log last-index

show accounting log last-index [ __readonly__ { <last_index> } ]

Syntax Description

show

Show running system information

accounting

Show accounting configuration

log

Show Accounting Log

last-index

Show accounting log last index information

__readonly__

(Optional)

last_index

(Optional) accounting log last index

Command Mode

- /exec

show accounting log nvram

show accounting log nvram [ { <i0> | start-time <SYYYY> <SMonth> <SDate> <STime> [ end-time <EYYYY> <EMonth> <EDate> <ETime> ] } ] [ __readonly__ [ TABLE_acctnvramlog_time <accountnvramlog_starttime> ] ]

Syntax Description

show

Show running system information

accounting

Show Accounting Information

log

Show Accounting Log

nvram

present in nvram

i0

(Optional) Log Size(in bytes)

start-time

(Optional) Show messages from a given start-time

SYYYY

(Optional) Enter year in YYYY format

SMonth

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

SDate

(Optional) Enter day of month in dd format

STime

(Optional) Enter hour, minutes, seconds as HH:MM:SS

end-time

(Optional) Show messages from a given end-time

EYYYY

(Optional) Enter year in YYYY format

EMonth

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

EDate

(Optional) Enter day of month in dd format

ETime

(Optional) Enter hour, minutes, seconds as HH:MM:SS

__readonly__

(Optional)

TABLE_acctnvramlog_time

(Optional)

accountnvramlog_starttime

(Optional) accounting log nvram starttime

Command Mode

- /exec

show accounting log nvram last-index

show accounting log nvram last-index [ __readonly__ { <last_index> } ]

Syntax Description

show

Show running system information

accounting

Show accounting configuration

log

Show Accounting Log

nvram

present in nvram

last-index

Show accounting log last index information

__readonly__

(Optional)

last_index

(Optional) accounting log last index

Command Mode

- /exec

show accounting log nvram start-seqnum

show accounting log nvram start-seqnum <SSEQNUM> [ end-seqnum <ESEQNUM> ] [ __readonly__ [ TABLE_acctnvramlog_seq <accountnvramlog_seq> ] ]

Syntax Description

show

Show running system information

accounting

Show Accounting Information

log

Show Accounting Log

nvram

present in nvram

start-seqnum

Show messages starting from a given sequence number

end-seqnum

(Optional) Show messages ending with a given sequence number

SSEQNUM

Enter Starting Sequence Number

ESEQNUM

(Optional) Enter Starting Sequence Number

__readonly__

(Optional)

TABLE_acctnvramlog_seq

(Optional)

accountnvramlog_seq

(Optional) accounting log nvram seqnum

Command Mode

- /exec

show accounting log start-seqnum

show accounting log start-seqnum <SSEQNUM> [ end-seqnum <ESEQNUM> ] [ __readonly__ [ TABLE_acctlog_seq <accountlog_seq> ] ]

Syntax Description

show

Show running system information

accounting

Show Accounting Information

log

Show Accounting Log

start-seqnum

Show messages starting from a given sequence number

end-seqnum

(Optional) Show messages ending with a given sequence number

SSEQNUM

Enter Starting Sequence Number

ESEQNUM

(Optional) Enter Starting Sequence Number

__readonly__

(Optional)

TABLE_acctlog_seq

(Optional)

accountlog_seq

(Optional) accounting log seqnum

Command Mode

- /exec

show acl status

show acl status [ __readonly__ [ <status_log_string> ] ]

Syntax Description

show

Show running system information

acl

Show information about acl

status

Shows the status of last acl operation

__readonly__

(Optional)

status_log_string

(Optional) ppf entry string

Command Mode

- /exec

show amt process

show amt process [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <pid> <uuid> <q> <re4> <ge4> <re6> <ge6> <pi4> <ar4> <ag4> <ra4> <ga4> <dra4> <pi6> <ar6> <ag6> <ra6> <ga6> <dra6> <qqic4> <tc4> <tl4> <rc4> <rl4> <jp4> <qqic6> <tc6> <tl6> <rc6> <rl6> <jp6> <grm4> <gjp4> <gslp4> <gsl4> <grm6> <gjp6> <gslp6> <gsl6> ]

Syntax Description

show

Show running system information

amt

AMT show commands

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

process

Display AMT process information

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

pid

(Optional)

uuid

(Optional)

q

(Optional)

re4

(Optional)

ge4

(Optional)

re6

(Optional)

ge6

(Optional)

pi4

(Optional)

ar4

(Optional)

ag4

(Optional)

ra4

(Optional)

ga4

(Optional)

dra4

(Optional)

pi6

(Optional)

qqic4

(Optional)

tc4

(Optional)

tl4

(Optional)

rc4

(Optional)

rl4

(Optional)

jp4

(Optional)

qqic6

(Optional)

tc6

(Optional)

tl6

(Optional)

rc6

(Optional)

rl6

(Optional)

jp6

(Optional)

grm4

(Optional)

gjp4

(Optional)

gslp4

(Optional)

gsl4

(Optional)

grm6

(Optional)

gjp6

(Optional)

gslp6

(Optional)

gsl6

(Optional)

Command Mode

- /exec

show amt vrf all

show amt vrf all [ __readonly__ TABLE_vrf <vrf> <cid> <ip_tid> <ipv6_tid> ]

Syntax Description

show

Show running system information

amt

AMT show commands

vrf

Display all VRFs AMT is configured in

all

Display all VRFs AMT is configured in

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

cid

(Optional)

ip_tid

(Optional)

ipv6_tid

(Optional)

Command Mode

- /exec

show archive log config

show archive log config { all | [ user <username> ] [ first-index <first_index> [ last-index <last_index> ] ] } [ __readonly__ [ TABLE_archivelog_time [ <archivelog_firstindex> ] ] ]

Syntax Description

show

Show running system information

archive

Show archive configuration

log

Show Archive Log

config

Show Config Logger information

all

List all the records in the config log

user

(Optional) List records for specific user in the config log

username

(Optional) Username

first-index

(Optional) The first record number to display

last-index

(Optional) The last record number to display

first_index

(Optional) config log first index

last_index

(Optional) config log last index

__readonly__

(Optional)

TABLE_archivelog_time

(Optional)

archivelog_firstindex

(Optional) archive log startindex

Command Mode

- /exec

show arp access-lists

show arp access-lists [ <name> ] [ __readonly__ TABLE_arp <arp_name> [ TABLE_seqno <seqno> { <permitdeny> <reqresp> ip { { <sender_ip_any> | { { <sender_host> <sender_ip> | { <sender_net_ip> <sender_ip_mask> } } } } [ { <target_ip_any> | { { <target_host> <target_ip> | { <target_net_ip> <target_ip_mask> } } } } ] } mac { { <sender_mac_any> | { { <sender_mac_host> <sender_mac> | { <sender_net_mac> <sender_mac_mask> } } } } [ { <target_mac_any> | { { <target_mac_host> <target_mac> | { <target_net_mac> <target_mac_mask> } } } } ] } [ <arp_log> ] } | <remark> ] ] [ capture session <session-id> ]

Syntax Description

show

Show running system information

arp

ARP access-lists

access-lists

List access lists

name

(Optional) List name

__readonly__

(Optional)

arp_name

(Optional) Name of the ARP ACL

seqno

(Optional) Sequence number

permitdeny

(Optional) Permit/deny

ip

(Optional) Any IP protocol

TABLE_arp

(Optional)

TABLE_seqno

(Optional)

reqresp

(Optional) ARP_Request

sender_ip_any

(Optional) Any

sender_host

(Optional) Host

sender_ip

(Optional) IP address <a.b.c.d>

sender_net_ip

(Optional) IP address <a.b.c.d>

sender_ip_mask

(Optional) IP mask <a.b.c.d>

target_ip_any

(Optional) Any

target_host

(Optional) Host

target_ip

(Optional) IP address <a.b.c.d>

target_net_ip

(Optional) IP address <a.b.c.d>

target_ip_mask

(Optional) IP mask <a.b.c.d>

mac

(Optional) MAC configuration commands

sender_mac_any

(Optional) Any

sender_mac_host

(Optional) Host

sender_mac

(Optional) MAC address EEEE.EEEE.EEEE

sender_net_mac

(Optional) MAC address EEEE.EEEE.EEEE

sender_mac_mask

(Optional) MAC mask EEEE.EEEE.EEEE

target_mac_any

(Optional) Any

target_mac_host

(Optional) Host

target_mac

(Optional) MAC address EEEE.EEEE.EEEE

target_net_mac

(Optional) MAC address EEEE.EEEE.EEEE

target_mac_mask

(Optional) MAC mask EEEE.EEEE.EEEE

remark

(Optional) Remark String

arp_log

(Optional) Log

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

Command Mode

- /exec

Chapter 3. B Show Commands

- show background

- show banner exec

- show banner motd

- show bash-shell

- show bfd-app session status

- show bfd addrmap

- show bfd clients

- show bfd discrmap

- show bfd intfipmap

- show bfd neighbors

- show bfd scalar

- show bfd session

- show bgp

- show bgp

- show bgp

- show bgp

- show bgp

- show bgp

- show bgp

- show bgp bmp server

- show bgp community

- show bgp convergence

- show bgp convergence private

- show bgp dampening dampened

- show bgp dampening flap-statistics

- show bgp dampening parameters

- show bgp default-info

- show bgp event-history

- show bgp evi

- show bgp extcommunity

- show bgp l3vpn

- show bgp neighbors

- show bgp neighbors

- show bgp neighbors commands

- show bgp neighbors flap-statistics

- show bgp neighbors paths

- show bgp paths

- show bgp peer-template

- show bgp peer

- show bgp prefix-list

- show bgp private

- show bgp private attr

- show bgp private damp

- show bgp private debug history

- show bgp process

- show bgp received-paths

- show bgp regexp

- show bgp self-originated

- show bgp sessions

- show bgp statistics

- show bgp summary

- show bgp summary

- show boot

- show boot auto-copy

- show boot auto-copy list

- show boot autocopy-status

- show boot current

- show boot mode

- show boot order

- show boot sup-1

- show boot sup-2

- show boot timings

- show boot variables

- show bootmode

- show buffers ip

show background

show background

Syntax Description

show

Show running system information

background

show background processes (started with 'source background <file>' command)

Command Mode

- /exec

show banner exec

show banner exec

Syntax Description

show

Show running system information

banner

Show current banner message

exec

Show current exec banner message

Command Mode

- /exec

show banner motd

show banner motd [ __readonly__ { banner_msg <b_msg> } ]

Syntax Description

show

Show running system information

banner

Show current banner message

motd

Show current motd banner message

__readonly__

(Optional)

banner_msg

(Optional) The banner message

b_msg

(Optional) The banner message

Command Mode

- /exec

show bash-shell

show bash-shell [ __readonly__ { operation_status <o_status> } ]

Syntax Description

show

Show running system information

bash-shell

Show bash shell status

__readonly__

(Optional)

operation_status

(Optional) Bash shell status

o_status

(Optional) operational status of bash shell

Command Mode

- /exec

show bfd-app session status

show bfd-app session status { src-ip { <src_ip> dest-ip <dest_ip> | <src_ipv6> dest-ip <dest_ipv6> } { iod <iod_id> | intf <intf_id> } | <all> }

Syntax Description

show

Show running system information

bfd-app

BFD application commands

session

session operation

src-ip

Source ip

src_ip

Source ip value

dest-ip

Destination ip

dest_ip

Destination ip value

iod

interface iod

iod_id

Interface iod in hex

intf

interface

intf_id

Interface Id

status

status of sessions

all

All sessions

Command Mode

- /exec

show bfd addrmap

show bfd addrmap [ application <appid> discriminator <discr> address-type <addrtype> address <addr> ] [ __readonly__ TABLE_bfdSessMapTable <ciscoBfdSessApplicationId> <ciscoBfdSessDiscriminator> <ciscoBfdSessAddrType> <ciscoBfdSessAddr> <ciscoBfdSessMapBfdIndex> ]

Syntax Description

show

Show running system information

bfd

BFD commands

addrmap

Session

application

(Optional)

discriminator

(Optional)

address-type

(Optional)

address

(Optional)

appid

(Optional)

discr

(Optional)

addrtype

(Optional)

addr

(Optional)

__readonly__

(Optional)

TABLE_bfdSessMapTable

(Optional) Address Map table

ciscoBfdSessApplicationId

(Optional)

ciscoBfdSessDiscriminator

(Optional)

ciscoBfdSessAddrType

(Optional)

ciscoBfdSessAddr

(Optional)

ciscoBfdSessMapBfdIndex

(Optional)

Command Mode

- /exec

show bfd clients

show bfd clients [ __readonly__ <header> TABLE-bfdClients <client_name> <num_sess> ]

Syntax Description

show

Show running system information

bfd

BFD commands

clients

bfd client list

__readonly__

(Optional)

header

(Optional) print header

TABLE-bfdClients

(Optional) BFD Client table

client_name

(Optional) client name

num_sess

(Optional) Number of sessions

Command Mode

- /exec

show bfd discrmap

show bfd discrmap [ <discr> ] [ __readonly__ TABLE_bfdDiscMapTable <ciscoBfdSessDiscMapIndex> ]

Syntax Description

show

Show running system information

bfd

BFD commands

discrmap

Session

discr

(Optional)

__readonly__

(Optional)

TABLE_bfdDiscMapTable

(Optional) Discriminator map table

ciscoBfdSessDiscMapIndex

(Optional)

Command Mode

- /exec

show bfd intfipmap

show bfd intfipmap [ interface <intf> address-type <addrtype> address <addr> ] [ __readonly__ TABLE_ipMapTable <ciscoBfdSessInterface> <ciscoBfdSessAddrType> <ciscoBfdSessAddr> <ciscoBfdSessIpMapIndex> ]

Syntax Description

show

Show running system information

bfd

BFD commands

intfipmap

Session

interface

(Optional)

address-type

(Optional)

address

(Optional)

intf

(Optional)

addrtype

(Optional)

addr

(Optional)

__readonly__

(Optional)

TABLE_ipMapTable

(Optional) ip map table

ciscoBfdSessInterface

(Optional)

ciscoBfdSessAddrType

(Optional)

ciscoBfdSessAddr

(Optional)

ciscoBfdSessIpMapIndex

(Optional)

Command Mode

- /exec

show bfd neighbors

show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ multihop ] | [ module <module_no> ] | [ interface <intf_id> ] | [ application <bfd_cli_client_names> ] | [ { src-ip <src_ip> | src-ipv6 <src_ipv6> } ] | [ { dest-ip <dest_ip> | dest-ipv6 <dest_ipv6> } ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ details ] [ __readonly__ TABLE_bfdNeighbor <local_disc> [ <header> ] [ <sess_type> ] [ <vrf_name> ] [ <src_ip_addr> ] [ <src_ipv6_addr> ] [ <dest_ip_addr> ] [ <dest_ipv6_addr> ] [ <remote_disc> ] [ <local_state> ] [ <remote_state> ] [ <holddown> ] [ <cur_detect_mult> ] [ <intf> ] [ <echo> ] [ <echo_tx> ] [ <local_diag> ] [ <demand> ] [ <poll> ] [ <min_tx> ] [ <min_rx> ] [ <local_multi> ] [ <dectect_timer> ] [ <down_count> ] [ <tx_interval> ] [ <rx_count> ] [ <rx_avg> ] [ <rx_min> ] [ <rx_max> ] [ <last_rx> ] [ <tx_count> ] [ <tx_avg> ] [ <tx_min> ] [ <tx_max> ] [ <last_tx> ] [ <app> ] [ <up_time> ] [ <version> ] [ <diag> ] [ <state_bit> ] [ <demand_bit> ] [ <poll_bit> ] [ <final_bit> ] [ <multiplier> ] [ <length> ] [ <my_disc> ] [ <your_disc> ] [ <min_tx_interval> ] [ <req_min_rx> ] [ <min_echo_interval> ] [ <out_str> ] [ <host_lc> ] [ <down_reason> ] [ <no_host_reason> ] [ <parent> ] [ <per_link_str> ] [ <auth> ] [ <auth_bit> ] [ <print_details> ] ]

Syntax Description

show

Show running system information

bfd

BFD commands

ip_type

(Optional) ipv4 or ipv6

neighbors

neighbors

multihop

(Optional) Display Multihop sessions only

module

(Optional) module

module_no

(Optional) module number

interface

(Optional) interface

intf_id

(Optional) show bfd sessions based on interface id

application

(Optional) application

bfd_cli_client_names

(Optional) __nil__ Clients need to register with bfd for this list

src-ip

(Optional) Source ip

src-ipv6

(Optional) Source ip

src_ip

(Optional) Source ip value

dest-ip

(Optional) Destination ip

dest-ipv6

(Optional) Destination ip

dest_ip

(Optional) Destination ip value

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

details

(Optional) details

__readonly__

(Optional)

TABLE_bfdNeighbor

(Optional) BFD Neighbor table

header

(Optional) Header

sess_type

(Optional) Session type

vrf_name

(Optional) vrf name

src_ip_addr

(Optional) Source IPV4 address

dest_ip_addr

(Optional) Destination IPV4 address

local_disc

(Optional) Local Discriminator

remote_disc

(Optional) Remote Discriminator

local_state

(Optional) Local State

remote_state

(Optional) Remote State

holddown

(Optional) Hold Down Time

cur_detect_mult

(Optional) Current Detection Multiplier

intf

(Optional) Interface

echo

(Optional) Echo enabled

echo_tx

(Optional) Echo Tx Interval

local_diag

(Optional) Local Diag

demand

(Optional) Demand Mode

poll

(Optional) Poll Bit

min_tx

(Optional) Local Min Tx Interval

min_rx

(Optional) Local Min Rx Interval

local_multi

(Optional) Local Detection Multiplier

dectect_timer

(Optional) Current Detection Timer

down_count

(Optional) Session Down Count

tx_interval

(Optional) Tx Interval

rx_count

(Optional) Tx Count

rx_avg

(Optional) Rx Interval Avg

rx_min

(Optional) Rx Interval Min

rx_max

(Optional) Rx Interval Max

last_rx

(Optional) Last Rx time

tx_count

(Optional) Tx Count

tx_avg

(Optional) Tx Interval Avg

tx_min

(Optional) Tx Interval Min

tx_max

(Optional) Tx Interval Max

last_tx

(Optional) Last Tx time

app

(Optional) App name

up_time

(Optional) Up time

version

(Optional) Version in Last Packet

diag

(Optional) diag in Last Packet

state_bit

(Optional) State Bit in Last Packet

demand_bit

(Optional) Demand Bit in Last Packet

poll_bit

(Optional) Poll Bit in Last Packet

final_bit

(Optional) Final Bit in Last Packet

multiplier

(Optional) Detection Multiplier in Last Packet

length

(Optional) Length in Last Packet

my_disc

(Optional) My Discriminator in Last Packet

your_disc

(Optional) Your Discriminator in Last Packet

min_tx_interval

(Optional) Min Tx Interval in Last Packet

req_min_rx

(Optional) Required Rx Interval in Last Packet

min_echo_interval

(Optional) Min Echo Interval in Last Packet

out_str

(Optional) No Host LC string

parent

(Optional) Parent Session

per_link_str

(Optional) Per Link string

host_lc

(Optional) Host LC

down_reason

(Optional) Session Down Reason

no_host_reason

(Optional) Not Hosted Reason

auth

(Optional) Authentication Mode

auth_bit

(Optional) Auth Bit in Last Packet

print_details

(Optional) print details

Command Mode

- /exec

show bfd scalar

show bfd scalar [ __readonly__ <adminStatus> <version> <notifEnable> ]

Syntax Description

show

Show running system information

bfd

BFD commands

scalar

bfd mib scalars

__readonly__

(Optional)

adminStatus

(Optional) bfd admin status

version

(Optional) bfd version number

notifEnable

(Optional) Enable bfd traps

Command Mode

- /exec

show bfd session

show bfd session { [ discriminator <sessionIndex> ] | [ interface <intf_id> ] | [ application <app_name> ] | [ src-ip <src_ip> ] | [ dest-ip <dest_ip> ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ __readonly__ <vrf_name_header> TABLE_bfdSessTable <ciscoBfdSessIndex> <isMember> <ciscoBfdSessApplicationId> <ciscoBfdSessDiscriminator> <ciscoBfdSessRemoteDiscr> <ciscoBfdSessUdpPort> <ciscoBfdSessState> <remoteBfdSessState> <ciscoBfdSessRemoteHeardFlag> <ciscoBfdSessDiag> <remoteBfdSessDiag> <ciscoBfdSessOperMode> <ciscoBfdSessDemandModeDesiredFlag> <ciscoBfdSessEchoFuncModeDesiredFlag> <ciscoBfdSessControlPlanIndepFlag> <ciscoBfdSessAddrType> <ciscoBfdSessAddr> <localBfdSessAddr> <ciscoBfdSessDesiredMinTxInterval> <ciscoBfdSessReqMinRxInterval> <ciscoBfdSessReqMinEchoRxInterval> <ciscoBfdSessDetectMult> <remoteBfdSessDesiredMinTxInterval> <remoteBfdSessReqMinRxInterval> <remoteBfdSessReqMinEchoRxInterval> <remoteBfdSessDetectMult> <ciscoBfdSessStorType> <ciscoBfdSessRowStatus> <ciscoBfdSessAuthPresFlag> <ciscoBfdSessAuthenticationType> <ciscoBfdSessVersionNumber> <ciscoBfdSessType> <ciscoBfdSessInterface> <ciscoBfdSessPerfPktIn> <ciscoBfdSessPerfPktOut> <ciscoBfdSessUpTime> <ciscoBfdSessPerfLastSessDownTime> <ciscoBfdSessPerfLastCommLostDiag> <ciscoBfdSessPerfSessUpCount> <ciscoBfdSessPerfDiscTime> <ciscoBfdSessPerfPktInHC> <ciscoBfdSessPerfPktOutHC> <effasyncdt> <effechodt> ]

Syntax Description

show

Show running system information

bfd

BFD commands

session

Session

discriminator

(Optional) Session local discriminator

sessionIndex

(Optional)

interface

(Optional) interface

intf_id

(Optional) show bfd sessions based on interface id

application

(Optional) application

app_name

(Optional) show bfd session based on application name

src-ip

(Optional) Source ip

src_ip

(Optional) Source ip value

dest-ip

(Optional) Destination ip

dest_ip

(Optional) Destination ip value

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

vrf_name_header

(Optional)

TABLE_bfdSessTable

(Optional) BFD Session table

ciscoBfdSessIndex

(Optional)

isMember

(Optional)

ciscoBfdSessApplicationId

(Optional)

ciscoBfdSessDiscriminator

(Optional)

ciscoBfdSessRemoteDiscr

(Optional)

ciscoBfdSessUdpPort

(Optional)

ciscoBfdSessState

(Optional) Session state

remoteBfdSessState

(Optional) Session state

ciscoBfdSessRemoteHeardFlag

(Optional)

ciscoBfdSessDiag

(Optional) Session diagnostic code

remoteBfdSessDiag

(Optional) Session diagnostic code

ciscoBfdSessOperMode

(Optional) ciscoBfdSessOperMode

ciscoBfdSessDemandModeDesiredFlag

(Optional)

ciscoBfdSessEchoFuncModeDesiredFlag

(Optional)

ciscoBfdSessControlPlanIndepFlag

(Optional)

ciscoBfdSessAddrType

(Optional) ciscoBfdSessAddrType

localBfdSessAddr

(Optional)

ciscoBfdSessAddr

(Optional)

ciscoBfdSessDesiredMinTxInterval

(Optional)

ciscoBfdSessReqMinRxInterval

(Optional)

ciscoBfdSessReqMinEchoRxInterval

(Optional)

ciscoBfdSessDetectMult

(Optional)

remoteBfdSessDesiredMinTxInterval

(Optional)

remoteBfdSessReqMinRxInterval

(Optional)

remoteBfdSessReqMinEchoRxInterval

(Optional)

remoteBfdSessDetectMult

(Optional)

ciscoBfdSessStorType

(Optional) ciscoBfdSessStorType

ciscoBfdSessRowStatus

(Optional)

ciscoBfdSessAuthPresFlag

(Optional)

ciscoBfdSessAuthenticationType

(Optional) ciscoBfdSessAuthenticationType

ciscoBfdSessVersionNumber

(Optional)

ciscoBfdSessType

(Optional) ciscoBfdSessType

ciscoBfdSessInterface

(Optional)

ciscoBfdSessPerfPktIn

(Optional)

ciscoBfdSessPerfPktOut

(Optional)

ciscoBfdSessUpTime

(Optional)

ciscoBfdSessPerfLastSessDownTime

(Optional)

ciscoBfdSessPerfLastCommLostDiag

(Optional)

ciscoBfdSessPerfSessUpCount

(Optional)

ciscoBfdSessPerfDiscTime

(Optional)

ciscoBfdSessPerfPktInHC

(Optional)

ciscoBfdSessPerfPktOutHC

(Optional)

effasyncdt

(Optional)

effechodt

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } { rib-install | rib-uninstall | rib-pending } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

rib-install

Routes installed in RIB

rib-uninstall

Routes not installed in RIB

rib-pending

Routes not acknowledged by RIB

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospf | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor <neighbor-id> [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network { <ip-addr> mask <ip-mask> | <ip-prefix> } } | { aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } { suppress-map | advertise-map } } } | vpnv4 unicast policy statistics { neighbor <neighbor-id> [ { route-map | filter-list | prefix-list } { in | out } ] } | ipv6 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospfv3 | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network <ipv6-prefix> } | { aggregate-address <ipv6-prefix> { suppress-map | advertise-map } } } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-polstats> [ <rpm-handle-count> ] [ { TABLE_rmap <name> <action> <seqnum> [ { TABLE_cmd <command> <comparecount> <matchcount> } ] [ <totalacceptcount> ] [ <totalrejectcount> ] } ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

policy

Display policy related information

statistics

Display Route Filter statistics

redistribute

Statistics for redistribution

isis

(Optional) ISO IS-IS

ospf

(Optional) Open Shortest Path First

ospfv3

(Optional) Open Shortest Path First v3

rip

(Optional) Routing Information Protocol

eigrp

(Optional) Enhanced Interior Gateway Protocol

static

(Optional) Static routes

direct

(Optional) Directly connected

amt

(Optional) AMT anycast prefix

lisp

(Optional) LISP EID-prefixes in the non-default VRF

hmm

(Optional) HMM prefix

am

(Optional) AM routes (learned via ARP)

tag

(Optional) Source protocol tag

neighbor

Show neighbor specific counters

neighbor-id

Neighbor IPv4 address

route-map

(Optional) Neighbor route-map

prefix-list

(Optional) Neighbor prefix-list

filter-list

(Optional) Neighbor filter-list

out

(Optional) Outbound policy

in

(Optional) Inbound policy

default-originate

(Optional) Default-originate policy

dampening

Show dampening info

network

Configured IP prefix to advertise

mask

Configured mask of the IP prefix advertised

aggregate-address

Configured BGP aggregate prefixes

suppress-map

Statistics of suppress policy

advertise-map

Statistics of advertise policy

ip-addr

IP network advertised

ip-mask

Dotted 4-octet mask

ip-prefix

IP prefix in CIDR format

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-polstats

(Optional)

rpm-handle-count

(Optional)

TABLE_rmap

(Optional)

name

(Optional)

action

(Optional)

seqnum

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

comparecount

(Optional)

matchcount

(Optional)

totalacceptcount

(Optional)

totalrejectcount

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ipv4 { unicast | multicast } | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast } [ <ip-addr> [ <ip-mask> [ longer-prefixes ] ] [ detail ] | <ip-prefix> [ longer-prefixes ] [ detail ] | labels | exported | imported | detail ] | { ipv6 { unicast | multicast } | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast } [ <ipv6-prefix> [ longer-prefixes ] [ detail ] | labels | exported | imported | detail ] | { ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] } [ <ip-addr> [ <ip-mask> ] | <ip-prefix> | labels | mdt-group <mdt-group> ] | { ipv4 | ipv6 } unicast [ injected-routes ] | link-state [ route-type <rt-type> | <ipv4-ls-rt> | <ipv6-ls-rt> ] | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } [ { <ip-addr> [ <ip-mask> ] | <ip-prefix> } | { ve-id <ve-id> block-offset <ve-bs> } ] ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } [ join <v4src-addr> <v4grp-addr> <src-asn> | rp <v4src-addr> <grp-v4prefix> <pe-addr> <rp-flags> <rp-priority> <hashlen> | sa <grp-v4prefix> | sa-ad <v4src-addr> <v4grp-addr> | route-type { 1 | 2 | 3 | 4 | 5 | 6 | 7 } [ detail ] ] | route-type { 1 | 2 | 3 | 4 | 5 | 6 | 7 } [ detail ] | join [ detail ] | sa-ad [ detail ] | i-pmsi [ detail ] ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } [ join <v6src-addr> <v6grp-addr> <src-asn> | rp <v6src-addr> <grp-v6prefix> <pe-addr> <rp-flags> <rp-priority> <hashlen> | sa <grp-v6prefix> | sa-ad <v6src-addr> <v6grp-addr> | route-type { 1 | 2 | 3 | 4 | 5 | 6 | 7 } [ detail ] ] | route-type { 1 | 2 | 3 | 4 | 5 | 6 | 7 } [ detail ] | join [ detail ] | sa-ad [ detail ] | i-pmsi [ detail ] ] | l2vpn evpn [ route-type <rtype> [ etid <et> ] | rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } [ route-type <rtype> [ etid <et> ] | <ipv4-evpn-rt> | <ipv6-evpn-rt> | <mac-address> ] | vni-id <vni_id> [ route-type <rtype> ] | es <es-id> [ route-type <rtype> [ etid <et> ] ] | <ipv4-evpn-rt> | <ipv6-evpn-rt> | <mac-address> ] | all [ detail ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip-addr

(Optional) Display one particular network from the BRIB in detail

ip-mask

(Optional) Mask for one particular prefix in the BRIB

ip-prefix

(Optional) Display one particular prefix from the BRIB in detail

longer-prefixes

(Optional) Display route and more specific routes

labels

(Optional) Display BGP labels for prefixes

exported

(Optional) Display only exported prefixes

imported

(Optional) Display only imported prefixes

injected-routes

(Optional) Display only injected prefixes

mdt-group

(Optional) Display prefixes with MDT group address

mdt-group

(Optional) MDT group address

rd

(Optional) Display information for a route distinguisher

ve-id

(Optional) VPLS VE ID

ve-id

(Optional) VPLS VE ID

route-type

(Optional) EVPN Route Type number

rtype

(Optional) EVPN route type number

1

(Optional) Inter-AS PMSI AD

2

(Optional) Intra-AS PMSI AD

3

(Optional) SPMSI AD

4

(Optional) LEAF AD

5

(Optional) Source-Active AD

6

(Optional) Shared C-Multicast

7

(Optional) Source C-Multicast

vni-id

(Optional) EVPN VNI ID number

vni_id

(Optional) EVPN VNI ID number

rt-type

(Optional) Link-State route-type

es

(Optional) Ethernet Segment

es-id

(Optional) ESID

etid

(Optional) Ethernet Tag-ID for L2VPN EVPN route

et

(Optional) Ethernet Tag-ID

ipv4-evpn-rt

(Optional) EVPN IPv4 address

ipv4-ls-rt

(Optional) Link-State NLRI with descriptor including IPv4 address

mac-address

(Optional) MAC address

block-offset

(Optional) VPLS VE Block offset

ve-bs

(Optional) VPLS VE Block offset

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

labeled-unicast

Display BGP information for labeled-unicast address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

join

(Optional) Display Multicast Join route

detail

(Optional) Display detailed path info for routes

sa

(Optional) Display Multicast Source Active AD route

sa-ad

(Optional) Display Multicast Source Active AD route

i-pmsi

(Optional) Display Multicast Intra-AS I-PMSI route

rp

(Optional) Display Multicast Group to RP route

v4src-addr

(Optional) Source IP Address

src-asn

(Optional) Source ASN

v4grp-addr

(Optional) Group IP Address

grp-v4prefix

(Optional) Group IP prefix

pe-addr

(Optional) PE IP Address

rp-flags

(Optional) Flags

rp-priority

(Optional) RP Priority

hashlen

(Optional) Hash mask length

1

(Optional) vrf

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } { route-map { <rmap-name> | <rmap-name> } | filter-list { <fltrlist-name> | <test_pol_name> } | { community-list { <commlist-name> | <test_pol_name> } | extcommunity-list { <extcommlist-name> | <test_pol_name> } } [ exact-match ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

route-map

Display routes matching the route-map

rmap-name

Route-map name

rmap-name

Known route-map name

filter-list

Display routes matching the filter-list

fltrlist-name

Name of filter-list

community-list

Display routes matching the community-list

commlist-name

Name of community-list

extcommunity-list

Display routes matching the extcommunity-list

extcommlist-name

Name of extcommunity-list

test_pol_name

An existing test-list policy

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

exact-match

(Optional) Exact match of the communities

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ipv4 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast } nexthop <ipnexthop> | { ipv6 { unicast | multicast } | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] } nexthop <ipv6nexthop> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

nexthop

Display routes matching the nexthop

ipnexthop

Nexthop address

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

evpn

Display BGP information for L2VPN EVPN address family

mvpn

Display BGP information for MVPN address family

labeled-unicast

Display BGP information for labeled-unicast address family

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { { ipv4 { unicast | multicast } | vpnv4 unicast | ipv4 mdt | link-state | l2vpn vpls | l2vpn evpn | ipv4 mvpn } nexthop-database [ <ipnexthop> ] } | { { ipv6 { unicast | multicast } | vpnv6 unicast | ipv6 mvpn } nexthop-database [ <ipv6nexthop> ] } | { all nexthop-database } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_nhvrf <nhvrf-name-out> TABLE_nhafi <nhafi> TABLE_nhsafi <nhsafi> <af-name> <nhcriticaldelay> <nhnoncriticaldelay> [ { TABLE_nexthop { <ipnexthop-out> | <ipv6nexthop-out> } <refcount> <igpmetric> <multipath> <igptype> <igppref> [ { TABLE_attachedhops { <attachedhop> | <ipv6attachedhop> } <interface> [ { TABLE_labels <index> <label> } ] } ] <attached> <local> <reachable> <labeled> <filtered> <resolvetime> { <ribroute> | <ipv6ribroute> } { <pendingupdate> | <pendingtime> } <nextadvertise> <rnhepoch> [ <pendingrnhepoch> ] } ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

nexthop-database

Display nexthop database

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

mdt

Display BGP information for multicast distribution tree

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

ipnexthop

(Optional) Nexthop address

__readonly__

(Optional)

TABLE_nhvrf

(Optional)

nhvrf-name-out

(Optional)

TABLE_nhafi

(Optional)

nhafi

(Optional)

TABLE_nhsafi

(Optional)

nhsafi

(Optional)

af-name

(Optional)

nhcriticaldelay

(Optional)

nhnoncriticaldelay

(Optional)

TABLE_nexthop

(Optional)

ipnexthop-out

(Optional)

refcount

(Optional)

igpmetric

(Optional)

multipath

(Optional)

igptype

(Optional)

igppref

(Optional)

TABLE_attachedhops

(Optional)

attachedhop

(Optional)

interface

(Optional)

TABLE_labels

(Optional)

index

(Optional)

label

(Optional)

attached

(Optional)

local

(Optional)

reachable

(Optional)

labeled

(Optional)

filtered

(Optional)

resolvetime

(Optional)

pendingupdate

(Optional)

pendingtime

(Optional)

ribroute

(Optional)

nextadvertise

(Optional)

rnhepoch

(Optional)

pendingrnhepoch

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] | ipv6 { unicast | multicast } flap-statistics [ <ipv6-prefix> ] | all flap-statistics } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ <dampening> <historypaths> <dampenedpaths> ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <status> ] [ <pathtype> ] [ <peer> | <ipv6peer> ] [ <flapcount> ] [ <duration> ] [ <reuse> ] [ <penalty> ] [ <suppresslimit> ] [ <reuselimit> ] [ <best> ] ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

flap-statistics

Display route flap statistics

ip-prefix

(Optional) Display flap statistics for one prefix

ip-addr

(Optional) Display flap statistics for one network

ip-mask

(Optional) Network mask

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

dampening

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

status

(Optional)

best

(Optional)

pathtype

(Optional)

peer

(Optional)

flapcount

(Optional)

duration

(Optional)

reuse

(Optional)

penalty

(Optional)

suppresslimit

(Optional)

reuselimit

(Optional)

Command Mode

- /exec

show bgp bmp server

show bgp bmp server [ <server-id> ] [ detail ] [ __readonly__ { system_name <sys_name> } { system_description <sys_description> } [ { TABLE_servers <server_id> <server_addr> <port> <admin_state> <oper_state> [ <description> ] <vrf> [ <update_src> ] <initial_delay> <refresh_interval> <stats_interval> [ { <initiation> <termination> <peer_up> <peer_down> <route_monitor> <route_mirror> <stats> <messages_dropped> } ] [ <monitored_peers> ] [ { TABLE_peer <peer_addr> [ { <refresh_interval> <peer_up> <peer_down> <route_monitor> <route_mirror> <stats> <messages_dropped> } ] [ <prefixes_denied> <dup_pfx_advmnt> <pfx_dup_wdr_count> <cluster_list_loops> <as_path_loops> <as_confed_loops> <invalid_originator> <adj_rib_in> <loc-rib> ] } ] } ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

bmp

Display BMP state

server

Display BMP server information

server-id

(Optional) Display server specific information

detail

(Optional) Display detailed information

__readonly__

(Optional)

system_name

(Optional) bmp-server global information

sys_name

(Optional) system name

system_description

(Optional) bmp-server global information

sys_description

(Optional) system description

TABLE_servers

(Optional) all bmp servers

server_id

(Optional) server id number of bmp server

server_addr

(Optional) ip address of the bmp server

port

(Optional) port number of the bmp server

admin_state

(Optional) administrative status of bmp server

oper_state

(Optional) operational status of bmp server

description

(Optional) description for bmp server

vrf

(Optional) vrf context for bmp server

update_src

(Optional) updated source for bmp server

initial_delay

(Optional) initial delay for bmp server

refresh_interval

(Optional) refresh delay for bmp server

stats_interval

(Optional) frequency of stat updates

initiation

(Optional) number of initiation messages

termination

(Optional) number of termination messages

peer_up

(Optional) number of peer up messages

peer_down

(Optional) number of peer down messages

route_monitor

(Optional) number of route monitor messages

route_mirror

(Optional) number of route mirror messages

stats

(Optional) number of stats messages

messages_dropped

(Optional) number of dropped messages

monitored_peers

(Optional) number of monitored peers for the bmp server

TABLE_peer

(Optional) monitored peer for the bmp server

peer_addr

(Optional) ip address of the peer

refresh_interval

(Optional) refresh delay for the peer

peer_up

(Optional) number of peer up messages for the peer

peer_down

(Optional) number of peer down messages for the peer

route_monitor

(Optional) number of route monitor messages for the peer

route_mirror

(Optional) number of route mirror messages for the peer

stats

(Optional) number of stats messages for the peer

messages_dropped

(Optional) number of dropped messages for the peer

prefixes_denied

(Optional) prefixes denied for the peer

dup_pfx_advmnt

(Optional) dup pfx advmnt for the peer

pfx_dup_wdr_count

(Optional) pfx dup wdr count for the peer

cluster_list_loops

(Optional) cluster list loops for the peer

as_path_loops

(Optional) as path loops for the peer

as_confed_loops

(Optional) as confed loops for the peer

invalid_originator

(Optional) invalid originator for the peer

adj_rib_in

(Optional) adj-rib-in for the peer

loc-rib

(Optional) loc-rib for the peer

Command Mode

- /exec

show bgp community

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } community { <regexp-str> | { { <comm-id> | <wellknown-id> } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

labeled-unicast

Display BGP information for labeled-unicast address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

community

Display routes matching the BGP communities

regexp-str

Regular expression to match the communities

comm-id

BGP community value

wellknown-id

BGP wellknown community

exact-match

(Optional) Exact match of the communities

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp convergence

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] convergence [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ <starttime> <configdonetime> <juststarted> [ <initwaittime> ] [ <ldpconverged> ] [ <ulibconvergencesent> ] [ TABLE_vrf <vrf-name-out> <bestpathtimeout> <configuredtimeout> <updatedelay> [ <firstpeerup> ] <timerrunning> [ <timerexpires> ] [ TABLE_afi <afi> TABLE_safi <safi> <af-name> <total_configured_peers> <total_capable_peers> <firstbestpathsignalled> [ <firstbestpathsignalledtime> ] <firstbestpathdone> [ <firstbestpathdonetime> [ <lastbestpathsignalledtime> <lastbestpathdonetime> ] ] [ <riblibconvergencesent> ] [ <importtimerrunning> ] [ <importtimerexpires> ] [ { TABLE_rcvdpeers [ <peer> ] [ <ipv6peer> ] [ <signalledtimepeer> ] } ] [ { TABLE_notrcvdpeers [ <notpeer> ] [ <notipv6peer> ] [ <nokeepalive> ] [ <notsignalledtime> ] } ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

convergence

Display information about convergence

detail

(Optional) Display detailed information about convergence

__readonly__

(Optional)

starttime

(Optional)

configdonetime

(Optional)

juststarted

(Optional)

initwaittime

(Optional)

ldpconverged

(Optional)

ulibconvergencesent

(Optional)

TABLE_vrf

(Optional)

total_configured_peers

(Optional)

total_capable_peers

(Optional)

vrf-name-out

(Optional)

bestpathtimeout

(Optional)

configuredtimeout

(Optional)

updatedelay

(Optional)

firstpeerup

(Optional)

timerrunning

(Optional)

timerexpires

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

firstbestpathsignalled

(Optional)

firstbestpathsignalledtime

(Optional)

firstbestpathdone

(Optional)

firstbestpathdonetime

(Optional)

lastbestpathsignalledtime

(Optional)

lastbestpathdonetime

(Optional)

riblibconvergencesent

(Optional)

importtimerrunning

(Optional)

importtimerexpires

(Optional)

TABLE_rcvdpeers

(Optional)

peer

(Optional)

signalledtimepeer

(Optional)

TABLE_notrcvdpeers

(Optional)

notpeer

(Optional)

nokeepalive

(Optional)

notsignalledtime

(Optional)

Command Mode

- /exec

show bgp convergence private

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] convergence private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

convergence

Display information about convergence

private

Display private information about convergence

Command Mode

- /exec

show bgp dampening dampened

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } dampening { dampened-paths [ regexp <regexp-str> ] | history-paths [ regexp <regexp-str> ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampened-paths

Display all dampened paths

history-paths

Display all history paths

dampening

Display dampening info

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

regexp

(Optional) Display routes matching the AS path regular expression

regexp-str

(Optional) Regular expression to match the AS paths

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp dampening flap-statistics

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } dampening flap-statistics [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ <dampening> <historypaths> <dampenedpaths> ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <status> ] [ <pathtype> ] [ <peer> | <ipv6peer> ] [ <flapcount> ] [ <duration> ] [ <reuse> ] [ <penalty> ] [ <suppresslimit> ] [ <reuselimit> ] [ <best> ] ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampening

Display dampening info

flap-statistics

Display flap statistics for routes

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

dampening

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

status

(Optional)

best

(Optional)

pathtype

(Optional)

peer

(Optional)

flapcount

(Optional)

duration

(Optional)

reuse

(Optional)

penalty

(Optional)

suppresslimit

(Optional)

reuselimit

(Optional)

Command Mode

- /exec

show bgp dampening parameters

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } dampening parameters [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_rd [ <rd_val> ] [ <rd_vrf> ] [ <rd_vniid> ] [ <rpmname> ] [ TABLE_rpm <rpmindex> <rpmdamphalflife> <rpmdampsuppress> <rpmdampreuse> <rpmdampsuppresstime> <rpmdampmaxpenalty> ] [ <dampconfigured> <damphalflife> <dampsuppress> <dampreuse> <dampsuppresstime> <dampmaxpenalty> ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampening

Display dampening info

parameters

Display dampening parameters

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional) VRF RD

rd_vniid

(Optional)

TABLE_rpm

(Optional)

rpmname

(Optional)

rpmindex

(Optional)

rpmdamphalflife

(Optional)

rpmdampsuppress

(Optional)

rpmdampreuse

(Optional)

rpmdampsuppresstime

(Optional)

rpmdampmaxpenalty

(Optional)

dampconfigured

(Optional)

damphalflife

(Optional)

dampsuppress

(Optional)

dampreuse

(Optional)

dampsuppresstime

(Optional)

dampmaxpenalty

(Optional)

Command Mode

- /exec

show bgp default-info

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } default-info [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

default-info

Display information about default routes

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

Command Mode

- /exec

show bgp event-history

show bgp [ internal ] event-history { <bgp-event-hist> | events | errors | msgs | detail | periodic | objstore | developer }

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

(Optional) Commands for internal use

event-history

Show various event logs of BGP

bgp-event-hist

Show BGP event log

detail

Show detailed event logs

events

Show event logs of BGP

errors

Show error logs of BGP

msgs

Show various message logs of BGP

objstore

Show objstore logs of BGP

developer

Show developer logs of BGP

periodic

Show periodic logs of BGP

Command Mode

- /exec

show bgp evi

show bgp evi [ <evi-id> ] [ __readonly__ [ TABLE_ctx <evid> <rd> <numlocalprefixes> <numtotalprefixes> <created> <lastoperup> <lastoperdown> <enabled> [ <associatedvrf> ] [ TABLE_activeexportrts <exportrt> ] [ TABLE_activeimportrts <importrt> ] [ TABLE_evpnactiveexportrts <evpnexportrt> ] [ TABLE_evpnactiveimportrts <evpnimportrt> ] [ TABLE_mvpnactiveexportrts <mvpnexportrt> ] [ TABLE_mvpnactiveimportrts <mvpnimportrt> ] [ TABLE_activeexportrtsv6 <exportrtv6> ] [ TABLE_activeimportrtsv6 <importrtv6> ] [ TABLE_evpnactiveexportrtsv6 <evpnexportrtv6> ] [ TABLE_evpnactiveimportrtsv6 <evpnimportrtv6> ] [ TABLE_mvpnactiveexportrtsv6 <mvpnexportrtv6> ] [ TABLE_mvpnactiveimportrtsv6 <mvpnimportrtv6> ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

evi

Display information about EVI database

evi-id

(Optional) EVI Id

__readonly__

(Optional)

TABLE_ctx

(Optional)

evid

(Optional)

rd

(Optional)

numlocalprefixes

(Optional)

numtotalprefixes

(Optional)

created

(Optional)

lastoperup

(Optional)

lastoperdown

(Optional)

enabled

(Optional)

associatedvrf

(Optional)

TABLE_activeexportrts

(Optional)

TABLE_activeimportrts

(Optional)

TABLE_evpnactiveexportrts

(Optional)

TABLE_evpnactiveimportrts

(Optional)

TABLE_mvpnactiveexportrts

(Optional)

TABLE_mvpnactiveimportrts

(Optional)

TABLE_activeexportrtsv6

(Optional)

TABLE_activeimportrtsv6

(Optional)

TABLE_evpnactiveexportrtsv6

(Optional)

TABLE_evpnactiveimportrtsv6

(Optional)

TABLE_mvpnactiveexportrtsv6

(Optional)

TABLE_mvpnactiveimportrtsv6

(Optional)

importrt

(Optional)

exportrt

(Optional)

evpnimportrt

(Optional)

evpnexportrt

(Optional)

mvpnimportrt

(Optional)

mvpnexportrt

(Optional)

importrtv6

(Optional)

exportrtv6

(Optional)

evpnimportrtv6

(Optional)

evpnexportrtv6

(Optional)

mvpnimportrtv6

(Optional)

mvpnexportrtv6

(Optional)

Command Mode

- /exec

show bgp extcommunity

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } extcommunity { <regexp-str> | { { 4byteas-generic { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

labeled-unicast

Display BGP information for labeled-unicast address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

extcommunity

Display routes matching the BGP extcommunities

4byteas-generic

Generic extended community

regexp-str

Regular expression to match the extcommunities

transitive

Transitive extcommunity

non-transitive

Non-Transitive extcommunity

ext-comm-gen-trans

Extcommunity number aa4:nn format

ext-comm-gen-nontrans

Extcommunity number aa4:nn format

exact-match

(Optional) Exact match of the extcommunities

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp l3vpn

show bgp l3vpn [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <vrf-id> ] [ <vrf-rd> ] [ <vrf-state> ] [ <vrf-state-rsn> ] [ <vrf-pending-rd> ] [ { TABLE_af <af-id> [ <af-name> ] [ <af-table-id> ] [ <af-state> ] [ <af-state-rsn> ] [ <af-num-peers> ] [ <af-num-active-peers> ] [ <af-peer-routes> ] [ <af-peer-paths> ] [ <af-peer-networks> ] [ <af-peer-aggregates> ] [ <af-export-rmap> ] [ <af-import-rmap> ] [ <af-retain-rt> ] [ TABLE_export_rt <export-rt> ] [ TABLE_import_rt <import-rt> ] [ TABLE_evpn_export_rt <evpn-export-rt> ] [ TABLE_evpn_import_rt <evpn-import-rt> ] [ TABLE_mvpn_export_rt <mvpn-export-rt> ] [ TABLE_mvpn_import_rt <mvpn-import-rt> ] [ <af-label-mode> ] [ <af-aggregate-label> ] } ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

l3vpn

BGP l3vpn information

vrf

(Optional) Virtual Router Context

detail

(Optional) Detailed information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional) Read Only

TABLE_vrf

(Optional)

vrf-name-out

(Optional) VRF name

vrf-id

(Optional) VRF ID

vrf-state

(Optional) VRF State

vrf-state-rsn

(Optional) VRF State Reason

vrf-rd

(Optional) VRF RD

vrf-pending-rd

(Optional) VRF pending RD

TABLE_af

(Optional)

af-id

(Optional) AF ID

af-table-id

(Optional) AF table

af-name

(Optional) AF table name

af-state

(Optional) AF table state

af-state-rsn

(Optional) AF table state reason

af-num-peers

(Optional) No. of peers

af-num-active-peers

(Optional) No. of active peers

af-peer-routes

(Optional) No. of peer routes

af-peer-paths

(Optional) No. of peer paths

af-peer-networks

(Optional) No. of peer networks

af-peer-aggregates

(Optional) No. of aggregates

af-export-rmap

(Optional) Export route-map

af-import-rmap

(Optional) Import route-map

af-retain-rt

(Optional) Retain RT

TABLE_export_rt

(Optional)

export-rt

(Optional) Export route-target

TABLE_import_rt

(Optional)

import-rt

(Optional) Import route-target

TABLE_evpn_export_rt

(Optional)

evpn-export-rt

(Optional) Export EVPN route-target

TABLE_evpn_import_rt

(Optional)

evpn-import-rt

(Optional) Import EVPN route-target

TABLE_mvpn_export_rt

(Optional)

mvpn-export-rt

(Optional) Export MVPN route-target

TABLE_mvpn_import_rt

(Optional)

mvpn-import-rt

(Optional) Import MVPN route-target

af-label-mode

(Optional) Label allocation mode

af-aggregate-label

(Optional) Aggregate Label

Command Mode

- /exec

show bgp neighbors

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } } | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | link-state | l2vpn vpls | l2vpn evpn | ipv4 mvpn | ipv6 mvpn | ipv4 labeled-unicast } neighbors [ { <neighbor-id> | <ipv6-neighbor-id> | <neighbor-prefix-id> | <ipv6-neighbor-prefix-id> } ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ [ TABLE_neighbor { <neighbor> | <ipv6neighbor> | <templatepeer> | <ipv4prefixneighbor> | <ipv6prefixneighbor> } [ <remoteas> ] [ <localas> ] <link> [ <peertype> ] [ <index> ] [ TABLE_peer <peer> ] [ <maxprefixpeers> ] [ <configpeer> ] [ <inherit-template> ] [ <inherit-session-template> ] [ { <prefix-parent> | <ipv6prefix-parent> } ] [ <description> ] [ <version> <remote-id> <state> <up> [ <elapsedtime> ] [ <restarttime> ] ] [ <sourceif> ] [ <connectedif> ] [ <connectedcheck> ] [ <lowmemexempt> ] [ <bfd> ] [ <bfdmintxinterval> ] [ <bfdminrxinterval> ] [ <bfdmultiplier> ] [ <bfdauthenticationtype> ] [ <ttlsecurity> ] [ <ttllimit> ] [ <password> ] [ <passiveonly> ] [ <activepeers> <closingpeers> <maxconcurrentpeers> ] [ <allocatedpeers> ] [ <totalpeersaccepted> ] [ <localas-inactive> ] <remove-privateas> { { [ <lastread> ] <holdtime> <keepalivetime> [ <lastwrite> ] [ <keepalive> ] <msgrecvd> <notificationsrcvd> <recvbufbytesinq> <msgsent> <notificationssent> <sentbytesoutstanding> <sentbytespacked> <connsestablished> <connsdropped> [ <connattempts> ] { { [ <peerresettime> ] <peerresetreason> [ <resettime> ] <resetreason> } | { [ <resettime> ] <resetreason> [ <peerresettime> ] <peerresetreason> } } [ <capsnegotiated> <capmpadvertised> [ <caprefreshadvertised> <capgrdynamicadvertised> ] [ <capmprecvd> <caprefreshrecvd> <capgrdynamicrecvd> ] [ <capolddynamicadvertised> <capolddynamicrecvd> <caprradvertised> <caprrrecvd> <capoldrradvertised> <capoldrrrecvd> <capas4advertised> <capas4recvd> ] [ { TABLE_af <af-afi> TABLE_saf <af-safi> <af-advertised> <af-recvd> <af-name> } ] [ <capgradvertised> <capgrrecvd> ] [ { TABLE_graf <gr-afi> TABLE_grsaf <gr-safi> <gr-af-name> <gr-adv> <gr-recv> <gr-fwd> } ] [ <grrestarttime> <grstaletime> ] [ <grrecvdrestarttime> ] [ [ { TABLE_addpathscapaf <addpathscap-afi> TABLE_addpathscapsaf <addpathscap-safi> <addpathscap-af-name> <addpathssendcap-adv> <addpathsrecvcap-adv> <addpathssendcap-recv> <addpathsrecvcap-recv> } ] [ <capaddpathsadvertised> <capaddpathsrecvd> ] ] [ <capextendednhadvertised> <capextendednhrecvd> ] [ { TABLE_capextendednhaf <capextendednh-afi> TABLE_capextendednhsaf <capextendednh-safi> <capextendednh-af-name> } ] ] } | { [ <configholdtime> <configkeepalivetime> ] } } [ <epe> ] [ <epe-adj-sids> ] [ <epe-peer-rpc-set> ] [ <epe-peer-sid> ] [ <epe-peer-set-name> ] [ <epe-peer-set-rpc-set> ] [ <epe-peer-set-sid> ] [ { TABLE_epe-adj { { <epe-adj-ip-local> <epe-adj-ip-remote> } | { <epe-adj-ipv6-local> <epe-adj-ipv6-remote> } } [ <epe-adj-ifindex> <epe-adj-rpc-set> <epe-adj-sid> ] } ] [ <grstate> <grexpiry> ] [ <firstkeepalive> ] [ <openssent> <opensrecvd> <updatessent> <updatesrecvd> <keepalivesent> <keepaliverecvd> <rtrefreshsent> <rtrefreshrecvd> <capabilitiessent> <capabilitiesrecvd> <bytessent> <bytesrecvd> ] [ TABLE_peraf <per-afi> TABLE_persaf <per-safi> <per-af-name> [ <tableversion> ] [ <neighbortableversion> ] [ <pfxrecvd> ] [ <pathsrecvd> ] [ <pfxbytes> ] [ <pfxsent> ] [ <pathssent> ] [ <conditionmap> <advertisemap> <advertisemapstatus> ] <insoftreconfigallowed> [ <insoftreconfigallowedalways> ] [ <sendcommunity> ] [ <sendextcommunity> ] [ { <localnexthop> | <ipv6localnexthop> } ] [ <thirdpartynexthop> ] [ <maxpfx> ] [ <maxpfx_threshold> ] [ <soo> ] [ <weight> ] [ <allowasin> ] <asoverride> <peerascheckdisabled> [ <vplssignalingprotocol> ] [ { TABLE_inpolicy <inpolicynr> <inpolicytype> <inpolicyname> [ <inpolicyhandle> ] } ] [ { TABLE_outpolicy <outpolicynr> <outpolicytype> <outpolicyname> [ <outpolicyhandle> ] } ] <rrconfigured> <defaultoriginate> [ <defaultoriginatermap> ] [ <defaultsent> ] [ <grpathssaved> ] [ <firsteorrecvd> ] [ <firsteortime> ] [ <pathsflushed> ] [ <lasteorrecvtime> ] [ <lasteorsenttime> ] [ <firstconvgtime> ] [ <pfxsentfirsteor> ] [ <unsuppress-map> ] [ { TABLE_policy_template <preference> <inherit-policy-template> } ] ] [ [ <threadid> ] [ <passivethreadid> <passivefd> ] [ { <localaddr> | <ipv6localaddr> } <localport> { <remoteaddr> | <ipv6remoteaddr> } <remoteport> <fd> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

(Optional) Display one particular BGP neighbor

neighbor-prefix-id

(Optional) Display details for a prefix peering

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_neighbor

(Optional)

neighbor

(Optional)

templatepeer

(Optional)

ipv4prefixneighbor

(Optional)

remoteas

(Optional)

localas

(Optional)

link

(Optional)

index

(Optional)

TABLE_peer

(Optional)

peer

(Optional)

maxprefixpeers

(Optional)

configpeer

(Optional)

inherit-template

(Optional)

inherit-session-template

(Optional)

prefix-parent

(Optional)

description

(Optional)

version

(Optional)

remote-id

(Optional)

state

(Optional)

up

(Optional)

elapsedtime

(Optional)

restarttime

(Optional)

peertype

(Optional)

sourceif

(Optional)

connectedif

(Optional)

connectedcheck

(Optional)

lowmemexempt

(Optional)

bfd

(Optional)

bfdmintxinterval

(Optional)

bfdminrxinterval

(Optional)

bfdmultiplier

(Optional)

bfdauthenticationtype

(Optional)

ttlsecurity

(Optional)

ttllimit

(Optional)

localas-inactive

(Optional)

passiveonly

(Optional)

activepeers

(Optional)

closingpeers

(Optional)

maxconcurrentpeers

(Optional)

allocatedpeers

(Optional)

totalpeersaccepted

(Optional)

password

(Optional)

remove-privateas

(Optional)

lastread

(Optional)

holdtime

(Optional)

keepalivetime

(Optional)

lastwrite

(Optional)

keepalive

(Optional)

msgrecvd

(Optional)

notificationsrcvd

(Optional)

recvbufbytesinq

(Optional)

msgsent

(Optional)

notificationssent

(Optional)

sentbytesoutstanding

(Optional)

sentbytespacked

(Optional)

connsestablished

(Optional)

connsdropped

(Optional)

connattempts

(Optional)

peerresettime

(Optional)

peerresetreason

(Optional)

resettime

(Optional)

resetreason

(Optional)

configholdtime

(Optional)

configkeepalivetime

(Optional)

grstate

(Optional)

grexpiry

(Optional)

firstkeepalive

(Optional)

epe

(Optional)

epe-adj-sids

(Optional)

epe-peer-rpc-set

(Optional)

epe-peer-sid

(Optional)

epe-peer-set-name

(Optional)

epe-peer-set-rpc-set

(Optional)

epe-peer-set-sid

(Optional)

TABLE_epe-adj

(Optional)

epe-adj-ip-local

(Optional)

epe-adj-ip-remote

(Optional)

epe-adj-ifindex

(Optional)

epe-adj-rpc-set

(Optional)

epe-adj-sid

(Optional)

openssent

(Optional)

opensrecvd

(Optional)

updatessent

(Optional)

updatesrecvd

(Optional)

keepalivesent

(Optional)

keepaliverecvd

(Optional)

rtrefreshsent

(Optional)

rtrefreshrecvd

(Optional)

capabilitiessent

(Optional)

capabilitiesrecvd

(Optional)

bytessent

(Optional)

bytesrecvd

(Optional)

threadid

(Optional)

fd

(Optional)

passivethreadid

(Optional)

passivefd

(Optional)

localaddr

(Optional)

localport

(Optional)

remoteaddr

(Optional)

remoteport

(Optional)

capsnegotiated

(Optional)

capmpadvertised

(Optional)

capgrdynamicadvertised

(Optional)

capaddpathsadvertised

(Optional)

caprefreshadvertised

(Optional)

capmprecvd

(Optional)

capgrdynamicrecvd

(Optional)

capaddpathsrecvd

(Optional)

caprefreshrecvd

(Optional)

capolddynamicadvertised

(Optional)

capolddynamicrecvd

(Optional)

caprradvertised

(Optional)

caprrrecvd

(Optional)

capoldrradvertised

(Optional)

capoldrrrecvd

(Optional)

capas4advertised

(Optional)

capas4recvd

(Optional)

TABLE_af

(Optional)

af-afi

(Optional)

TABLE_saf

(Optional)

af-safi

(Optional)

af-advertised

(Optional)

af-recvd

(Optional)

af-name

(Optional)

capgradvertised

(Optional)

capgrrecvd

(Optional)

TABLE_graf

(Optional)

gr-afi

(Optional)

TABLE_grsaf

(Optional)

gr-safi

(Optional)

gr-af-name

(Optional)

gr-adv

(Optional)

gr-recv

(Optional)

gr-fwd

(Optional)

grrestarttime

(Optional)

grstaletime

(Optional)

grrecvdrestarttime

(Optional)

TABLE_addpathscapaf

(Optional)

addpathscap-afi

(Optional)

TABLE_addpathscapsaf

(Optional)

addpathscap-safi

(Optional)

addpathscap-af-name

(Optional)

addpathssendcap-adv

(Optional)

addpathsrecvcap-adv

(Optional)

addpathssendcap-recv

(Optional)

addpathsrecvcap-recv

(Optional)

capextendednhadvertised

(Optional)

capextendednhrecvd

(Optional)

TABLE_capextendednhaf

(Optional)

capextendednh-afi

(Optional)

TABLE_capextendednhsaf

(Optional)

capextendednh-safi

(Optional)

capextendednh-af-name

(Optional)

TABLE_peraf

(Optional)

per-afi

(Optional)

TABLE_persaf

(Optional)

per-safi

(Optional)

per-af-name

(Optional)

tableversion

(Optional)

neighbortableversion

(Optional)

pfxrecvd

(Optional)

pathsrecvd

(Optional)

pfxbytes

(Optional)

pfxsent

(Optional)

pathssent

(Optional)

conditionmap

(Optional)

advertisemap

(Optional)

advertisemapstatus

(Optional)

insoftreconfigallowed

(Optional)

insoftreconfigallowedalways

(Optional)

sendcommunity

(Optional)

sendextcommunity

(Optional)

maxpfx

(Optional)

maxpfx_threshold

(Optional)

localnexthop

(Optional)

TABLE_inpolicy

(Optional)

inpolicynr

(Optional)

inpolicytype

(Optional)

inpolicyname

(Optional)

inpolicyhandle

(Optional)

TABLE_outpolicy

(Optional)

outpolicynr

(Optional)

outpolicytype

(Optional)

outpolicyname

(Optional)

outpolicyhandle

(Optional)

rrconfigured

(Optional)

defaultoriginate

(Optional)

defaultoriginatermap

(Optional)

defaultsent

(Optional)

grpathssaved

(Optional)

firsteorrecvd

(Optional)

firsteortime

(Optional)

pathsflushed

(Optional)

lasteorrecvtime

(Optional)

lasteorsenttime

(Optional)

firstconvgtime

(Optional)

pfxsentfirsteor

(Optional)

unsuppress-map

(Optional)

thirdpartynexthop

(Optional)

soo

(Optional)

weight

(Optional)

allowasin

(Optional)

asoverride

(Optional)

peerascheckdisabled

(Optional)

vplssignalingprotocol

(Optional)

TABLE_policy_template

(Optional)

preference

(Optional)

inherit-policy-template

(Optional)

Command Mode

- /exec

show bgp neighbors

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } } | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | ipv4 labeled-unicast | l2vpn evpn } neighbors { <neighbor-id> | <ipv6-neighbor-id> } { routes [ advertised | received | dampened ] | advertised-routes | received-routes } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

Display one particular BGP neighbor

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

labeled-unicast

Display BGP information for labeled-unicast address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

routes

Display all routes advertised/received to/from peer

advertised

(Optional) Display all routes advertised to this peer

received

(Optional) Display all routes received from this peer

advertised-routes

Display all the routes advertised to this peer

received-routes

Display all the routes received from this peer

dampened

(Optional) Display all dampened routes received from this peer

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp neighbors commands

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } } | vpnv4 unicast | vpnv6 unicast | l2vpn evpn } neighbors { <neighbor-id> | <ipv6-neighbor-id> } commands [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ [ { TABLE_sesscmd <sessioncmd> <sessioncmdstatus> [ <sessioncmdtemplate> ] } ] [ TABLE_af <af-afi> TABLE_saf <af-safi> <af-name> [ { TABLE_polcmd <policycmd> <policycmdstatus> [ <policycmdtemplate> ] } ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbor-id

Display one particular BGP neighbor

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

neighbors

Display all configured BGP neighbors

commands

Display details on commands

__readonly__

(Optional)

TABLE_sesscmd

(Optional)

sessioncmd

(Optional)

sessioncmdstatus

(Optional)

sessioncmdtemplate

(Optional)

TABLE_af

(Optional)

af-afi

(Optional)

TABLE_saf

(Optional)

af-safi

(Optional)

af-name

(Optional)

TABLE_polcmd

(Optional)

policycmd

(Optional)

policycmdstatus

(Optional)

policycmdtemplate

(Optional)

Command Mode

- /exec

show bgp neighbors flap-statistics

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } neighbors { <neighbor-id> | <ipv6-neighbor-id> } flap-statistics [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ <dampening> <historypaths> <dampenedpaths> ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <status> ] [ <pathtype> ] [ <peer> | <ipv6peer> ] [ <flapcount> ] [ <duration> ] [ <reuse> ] [ <penalty> ] [ <suppresslimit> ] [ <reuselimit> ] [ <best> ] ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

Display one particular BGP neighbor

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

flap-statistics

Display flap statistics for routes received from this peer

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

dampening

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

status

(Optional)

best

(Optional)

pathtype

(Optional)

peer

(Optional)

flapcount

(Optional)

duration

(Optional)

reuse

(Optional)

penalty

(Optional)

suppresslimit

(Optional)

reuselimit

(Optional)

Command Mode

- /exec

show bgp neighbors paths

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } } | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | ipv4 labeled-unicast | link-state | l2vpn evpn } neighbors { <neighbor-id> | <ipv6-neighbor-id> } paths [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_id <id> <hashvalue> <refcount> <metric> <aspath> ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

Display one particular BGP neighbor

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

all

Display BGP information for all address families

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

paths

Display AS paths learned from this peer

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_id

(Optional)

id

(Optional)

hashvalue

(Optional)

refcount

(Optional)

metric

(Optional)

aspath

(Optional)

Command Mode

- /exec

show bgp paths

show [ ip ] bgp paths [ __readonly__ TABLE_id <id> <hashvalue> <refcount> <metric> <aspath> <origin> ]

Syntax Description

show

Show running system information

ip

(Optional) Display IP information

bgp

Display BGP status and configuration

paths

Display Path information

__readonly__

(Optional)

TABLE_id

(Optional)

id

(Optional)

hashvalue

(Optional)

refcount

(Optional)

metric

(Optional)

aspath

(Optional)

origin

(Optional)

Command Mode

- /exec

show bgp peer-template

show [ ip ] bgp peer-template [ <peer-template-name> ] [ __readonly__ { TABLE_neighbor <templatepeer> [ <remoteas> ] [ <inherit-template> ] [ <inherit-session-template> ] [ { <prefix-parent> | <ipv6prefix-parent> } ] [ <description> ] [ <sourceif> ] [ <connectedcheck> ] [ <lowmemexempt> ] [ <bfd> ] [ <bfdmintxinterval> ] [ <bfdminrxinterval> ] [ <bfdmultiplier> ] [ <bfdauthenticationtype> ] [ <ttlsecurity> ] [ <ttllimit> ] [ <password> ] [ <passiveonly> ] <localas-inactive> [ <remove-privateas> ] [ <configholdtime> <configkeepalivetime> ] [ TABLE_peraf <per-afi> TABLE_persaf <per-safi> <per-af-name> [ <tableversion> ] [ <neighbortableversion> ] [ <pfxrecvd> ] [ <pathsrecvd> ] [ <pfxbytes> ] [ <pfxsent> ] [ <pathssent> ] [ <conditionmap> <advertisemap> <advertisemapstatus> ] <insoftreconfigallowed> [ <insoftreconfigallowedalways> ] [ <sendcommunity> ] [ <sendextcommunity> ] [ { <localnexthop> | <ipv6localnexthop> } ] [ <thirdpartynexthop> ] [ <maxpfx> ] [ <maxpfx_threshold> ] [ <soo> ] [ <weight> ] [ <allowasin> ] <asoverride> <peerascheckdisabled> [ <vplssignalingprotocol> ] [ { TABLE_inpolicy <inpolicynr> <inpolicytype> <inpolicyname> [ <inpolicyhandle> ] } ] [ { TABLE_outpolicy <outpolicynr> <outpolicytype> <outpolicyname> [ <outpolicyhandle> ] } ] <rrconfigured> <defaultoriginate> [ <defaultoriginatermap> ] [ <defaultsent> ] [ <grpathssaved> ] [ <firsteorrecvd> ] [ <firsteortime> ] [ <pathsflushed> ] [ <lasteorrecvtime> ] [ <lasteorsenttime> ] [ <firstconvgtime> ] [ <pfxsentfirsteor> ] [ <unsuppress-map> ] [ { TABLE_policy_template <preference> <inherit-policy-template> } ] ] [ TABLE_vrf <vrf-name> [ TABLE_inheritingpeer <inheritingpeer> ] ] } ]

Syntax Description

show

Show running system information

ip

(Optional) Display IP information

bgp

Display BGP status and configuration

peer-template

Display information about a peer-template

peer-template-name

(Optional) Peer-template name

__readonly__

(Optional)

TABLE_neighbor

(Optional)

templatepeer

(Optional)

remoteas

(Optional)

inherit-template

(Optional)

inherit-session-template

(Optional)

prefix-parent

(Optional)

description

(Optional)

sourceif

(Optional)

connectedcheck

(Optional)

lowmemexempt

(Optional)

bfd

(Optional)

bfdmintxinterval

(Optional)

bfdminrxinterval

(Optional)

bfdmultiplier

(Optional)

bfdauthenticationtype

(Optional)

ttlsecurity

(Optional)

ttllimit

(Optional)

passiveonly

(Optional)

password

(Optional)

localas-inactive

(Optional)

remove-privateas

(Optional)

configholdtime

(Optional)

configkeepalivetime

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_inheritingpeer

(Optional)

inheritingpeer

(Optional)

TABLE_peraf

(Optional)

per-afi

(Optional)

TABLE_persaf

(Optional)

per-safi

(Optional)

per-af-name

(Optional)

tableversion

(Optional)

neighbortableversion

(Optional)

pfxrecvd

(Optional)

pathsrecvd

(Optional)

pfxbytes

(Optional)

pfxsent

(Optional)

pathssent

(Optional)

conditionmap

(Optional)

advertisemap

(Optional)

advertisemapstatus

(Optional)

insoftreconfigallowed

(Optional)

insoftreconfigallowedalways

(Optional)

sendcommunity

(Optional)

sendextcommunity

(Optional)

maxpfx

(Optional)

maxpfx_threshold

(Optional)

localnexthop

(Optional)

TABLE_inpolicy

(Optional)

inpolicynr

(Optional)

inpolicytype

(Optional)

inpolicyname

(Optional)

inpolicyhandle

(Optional)

TABLE_outpolicy

(Optional)

outpolicynr

(Optional)

outpolicytype

(Optional)

outpolicyname

(Optional)

outpolicyhandle

(Optional)

rrconfigured

(Optional)

defaultoriginate

(Optional)

defaultoriginatermap

(Optional)

defaultsent

(Optional)

grpathssaved

(Optional)

firsteorrecvd

(Optional)

firsteortime

(Optional)

pathsflushed

(Optional)

lasteorrecvtime

(Optional)

lasteorsenttime

(Optional)

firstconvgtime

(Optional)

pfxsentfirsteor

(Optional)

unsuppress-map

(Optional)

thirdpartynexthop

(Optional)

soo

(Optional)

weight

(Optional)

allowasin

(Optional)

asoverride

(Optional)

peerascheckdisabled

(Optional)

vplssignalingprotocol

(Optional)

TABLE_policy_template

(Optional)

preference

(Optional)

inherit-policy-template

(Optional)

Command Mode

- /exec

show bgp peer

show [ ip ] bgp { peer-session [ <session-template-name> ] | peer-policy [ <policy-template-name> ] } [ __readonly__ TABLE_template <template> <present> [ { TABLE_command <command> [ <polarity> ] [ <updatesource> ] [ <description> ] [ <multihop> ] [ <holdtime> ] [ <keepalive> ] [ <routemapin> ] [ <routemapout> ] [ <filterlistin> ] [ <filterlistout> ] [ <prefixlistin> ] [ <prefixlistout> ] [ <maxprefixlimit> ] [ <defaultorigin> ] } ] [ { TABLE_vrf <vrf-name> { TABLE_peer <inheritingpeer> } } ] ]

Syntax Description

show

Show running system information

ip

(Optional) Display IP information

bgp

Display BGP status and configuration

peer-session

Display information about a peer-session

peer-policy

Display information about a peer-policy

session-template-name

(Optional) Peer-session name

policy-template-name

(Optional) Peer-policy name

__readonly__

(Optional)

TABLE_template

(Optional)

template

(Optional)

present

(Optional)

TABLE_command

(Optional)

command

(Optional)

polarity

(Optional)

updatesource

(Optional)

description

(Optional)

multihop

(Optional)

holdtime

(Optional)

keepalive

(Optional)

routemapin

(Optional)

routemapout

(Optional)

filterlistin

(Optional)

filterlistout

(Optional)

prefixlistin

(Optional)

prefixlistout

(Optional)

maxprefixlimit

(Optional)

defaultorigin

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_peer

(Optional)

inheritingpeer

(Optional)

Command Mode

- /exec

show bgp prefix-list

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } } prefix-list { <prfxlist-name> | <test_pol_name> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

prefix-list

Display routes matching the prefix-list

prfxlist-name

Name of prefix-list

test_pol_name

An existing test-list policy

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp private

show bgp private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { all_private | session | ipc | rnh | lists | rpm-info [ route-map <rpm-name> { <ip-prefix> | <ipv6-prefix> } ] | attr [ { <ip-prefix> } ] | rpm-attribute-cache | rpm-comm-attr-cache | virtual [ summary ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

private

Show BGP information intended for developer eyes only

all_private

Show all info

session

Show session info

lists

Show BGP internal lists

route-map

(Optional) Show information for route-map

rpm-info

Show BGP policy outbound info

ip-prefix

(Optional) Show attribute for a prefix

rpm-name

(Optional) Route-map name

attr

Show attribute information

ipc

Show ipc information

rnh

Show recursive next hops

rpm-attribute-cache

Show rpm attribute cache statistics

rpm-comm-attr-cache

Show rpm community attribute cache statistics

summary

(Optional) Summary only

virtual

Virtualization related

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show bgp private attr

show bgp private attr [ remote-nh ] [ [ [ ipv4 { unicast | multicast } <ip-prefix> ] | [ ipv6 { unicast | multicast } <ipv6-prefix> ] ] [ detail ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

private

Show BGP information intended for developer eyes only

attr

Show BGP attributes

remote-nh

(Optional) Show Remote NH Attr

ipv4

(Optional) Display BGP information for IPv4 address family

ipv6

(Optional) Display BGP information for IPv6 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

detail

(Optional) Show detailed info

ip-prefix

(Optional) Show attribute for a prefix

Command Mode

- /exec

show bgp private damp

show bgp private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } damp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

private

Show BGP information intended for developer eyes only

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

damp

Show dampening info

Command Mode

- /exec

show bgp private debug history

show bgp private debug history { all | ead-es | es | mac }

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

private

Show BGP information intended for developer eyes only

debug

Debug

history

history

all

all

ead-es

ead-es

es

es

mac

mac

Command Mode

- /exec

show bgp process

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] process [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ [ <processid> <protocolstartedreason> <protocoltag> <protocolstate> [ <isolatemode> ] <mmode> <memorystate> [ <mallocmemorystate> ] [ <platformmemorystate> ] [ <lowmemorytimer> ] [ <issu> ] <forwardingstatesaved> <asformat> [ <fabricsoo> ] [ <srgbmin> <srgbmax> ] [ <epeconfiguredpeers> <epeactivepeers> ] <attributeentries> <hwmattributeentries> <bytesused> <entriespendingdelete> <hwmentriespendingdelete> <pathsperattribute> <aspathentries> <aspathbytes> ] TABLE_vrf <vrf-name-out> [ <vrf-id> ] [ <vrf-state> ] [ <vrf-state-rsn> ] [ <vrf-delete-pending> ] [ <vrf-evpn-mpls> ] [ <vrf-vni-id> ] [ <vrf-vni-id-valid> ] [ <vrf-topo-id> ] [ <vrf-encap-type> ] [ <vrf-vtep-ip> ] [ <vrf-vtep-virtual-ip> ] [ <vrf-vtep-vipr> ] [ <vrf-router-mac> ] [ <vrf-vip-router-mac> ] [ <vrf-vipr-router-mac> ] [ <vrf-router-id> ] [ <vrf-cfgd-id> ] [ <vrf-local-as> ] [ <vrf-confed-id> ] [ <vrf-cluster-id> ] [ <vrf-reconnect-interval> ] [ <vrf-peers> ] [ <vrf-pending-peers> ] [ <vrf-est-peers> ] [ <vrf-cfgd-max-as-limit> ] [ <vrf-max-as-limit> ] [ <vrf-rd-configured> ] [ <vrf-rd> ] [ <vrf-pending-rd> ] { TABLE_af <af-id> [ <af-name> ] [ <af-table-id> ] [ <af-state> ] [ <af-state-rsn> ] [ <af-num-peers> ] [ <af-num-active-peers> ] [ <af-peer-routes> ] [ <af-peer-paths> ] [ <af-peer-networks> ] [ <af-peer-aggregates> ] [ <af-export-rmap> ] [ <af-import-rmap> ] [ <af-retain-rt> ] [ { TABLE_redist <protocol> <route-map> } ] <wait-igp-convergence> [ { TABLE_add_paths_selection <route-map> } ] [ TABLE_export_rt <export-rt> ] [ TABLE_import_rt <import-rt> ] [ TABLE_evpn_export_rt <evpn-export-rt> ] [ TABLE_evpn_import_rt <evpn-import-rt> ] [ TABLE_mvpn_export_rt <mvpn-export-rt> ] [ TABLE_mvpn_import_rt <mvpn-import-rt> ] [ <af-label-mode> ] [ <af-aggregate-label> ] [ <importdefault_prefixlimit> <importdefault_prefixcount> <importdefault_map> ] [ <exportdefault_prefixlimit> <exportdefault_prefixcount> <exportdefault_map> ] <af-rr> <default-information-enabled> [ <default-information-rd> <default-information-rt> ] <nexthop-trigger-delay-critical> <nexthop-trigger-delay-non-critical> [ <nexthop-route-map> ] } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

process

BGP global information

detail

(Optional) Detailed information

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional) Read Only

processid

(Optional)

protocolstartedreason

(Optional)

protocoltag

(Optional)

protocolstate

(Optional)

isolatemode

(Optional)

mmode

(Optional)

memorystate

(Optional)

mallocmemorystate

(Optional)

platformmemorystate

(Optional)

lowmemorytimer

(Optional)

issu

(Optional)

forwardingstatesaved

(Optional)

asformat

(Optional)

attributeentries

(Optional)

fabricsoo

(Optional)

srgbmin

(Optional)

srgbmax

(Optional)

epeconfiguredpeers

(Optional)

epeactivepeers

(Optional)

hwmattributeentries

(Optional)

bytesused

(Optional)

entriespendingdelete

(Optional)

hwmentriespendingdelete

(Optional)

pathsperattribute

(Optional)

aspathentries

(Optional)

aspathbytes

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional) VRF name

vrf-id

(Optional) VRF ID

vrf-state

(Optional) VRF State

vrf-state-rsn

(Optional) VRF State Reason

vrf-delete-pending

(Optional) VRF delete pending

vrf-evpn-mpls

(Optional) VRF EVPN L3 MPLS

vrf-vni-id

(Optional) VRF VNI ID

vrf-vni-id-valid

(Optional) VRF VNI ID validity

vrf-topo-id

(Optional) VRF Topo ID

vrf-encap-type

(Optional) VRF encapsulation type

vrf-vtep-ip

(Optional) VRF VTEP IP

vrf-vtep-virtual-ip

(Optional) VRF VTEP Virtual IP

vrf-vtep-vipr

(Optional) VRF VTEP Virtual IP for Re-origination

vrf-router-mac

(Optional) VRF Router MAC

vrf-vip-router-mac

(Optional) VRF VIP Router MAC

vrf-vipr-router-mac

(Optional) VRF VIPR Router MAC

vrf-router-id

(Optional) Router ID

vrf-cfgd-id

(Optional) Configured Router-ID

vrf-local-as

(Optional) Local AS

vrf-confed-id

(Optional) Cluster-ID

vrf-cluster-id

(Optional) Cluster-ID

vrf-reconnect-interval

(Optional) VRF reconnect interval

vrf-peers

(Optional) No. of configured peers

vrf-pending-peers

(Optional) No. of pending peers

vrf-est-peers

(Optional) No. of established peers

vrf-cfgd-max-as-limit

(Optional) Configured maxas-limit

vrf-max-as-limit

(Optional) Active maxas-limit

vrf-rd-configured

(Optional) VRF RD Configured

vrf-rd

(Optional) VRF RD

vrf-pending-rd

(Optional) VRF pending RD

TABLE_af

(Optional)

af-id

(Optional) AF ID

af-table-id

(Optional) AF table

af-name

(Optional) AF table name

af-state

(Optional) AF table state

af-state-rsn

(Optional) AF table state reason

af-num-peers

(Optional) No. of peers

af-num-active-peers

(Optional) No. of active peers

af-peer-routes

(Optional) No. of peer routes

af-peer-paths

(Optional) No. of peer paths

af-peer-networks

(Optional) No. of peer networks

af-peer-aggregates

(Optional) No. of aggregates

af-export-rmap

(Optional) Export route-map

af-import-rmap

(Optional) Import route-map

af-retain-rt

(Optional) Retain RT

TABLE_redist

(Optional)

protocol

(Optional) Protocol

route-map

(Optional) Route Map

wait-igp-convergence

(Optional)

TABLE_add_paths_selection

(Optional)

route-map

(Optional) Route Map

TABLE_export_rt

(Optional)

export-rt

(Optional) Export route-target

TABLE_import_rt

(Optional)

import-rt

(Optional) Import route-target

TABLE_evpn_export_rt

(Optional)

evpn-export-rt

(Optional) Export EVPN route-target

TABLE_evpn_import_rt

(Optional)

evpn-import-rt

(Optional) Import EVPN route-target

TABLE_mvpn_export_rt

(Optional)

mvpn-export-rt

(Optional) Export MVPN route-target

TABLE_mvpn_import_rt

(Optional)

mvpn-import-rt

(Optional) Import MVPN route-target

af-label-mode

(Optional) Label allocation mode

af-aggregate-label

(Optional) Aggregate Label

importdefault_prefixlimit

(Optional) Maximum number of prefixes allowed

importdefault_prefixcount

(Optional) Current number of prefixes

importdefault_map

(Optional) Configured route-map

exportdefault_prefixlimit

(Optional) Maximum number of prefixes allowed

exportdefault_prefixcount

(Optional) Current number of prefixes

exportdefault_map

(Optional) Configured route-map

af-rr

(Optional) Is a Route-reflector

default-information-enabled

(Optional) Default-information originate is enabled

default-information-rd

(Optional) Default-information originate RD

default-information-rt

(Optional) Default-information originate RT

nexthop-trigger-delay-critical

(Optional)

nexthop-trigger-delay-non-critical

(Optional)

nexthop-route-map

(Optional)

Command Mode

- /exec

show bgp received-paths

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } received-paths [ private ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

received-paths

Display paths stored for soft-reconfig

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

private

(Optional) private

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp regexp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } regexp <regexp-str> [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

regexp

Display routes matching the AS path regular expression

regexp-str

Regular expression to match the AS paths

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp self-originated

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } self-originated [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <weight> <aspath> <origin> [ <metric> ] [ <localpref> ] } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <importsource> [ <originalimportsource> ] ] [ <importdestscount> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> <atomicaggregate> ] [ <inlabel> ] [ <originflag> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

self-originated

Self originated routes

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

importsource

(Optional)

originalimportsource

(Optional)

importdestscount

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

atomicaggregate

(Optional)

inlabel

(Optional)

originflag

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp sessions

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] sessions [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ <totalpeers> <totalestablishedpeers> <localas> TABLE_vrf <vrf-name-out> <local-as> <vrfpeers> <vrfestablishedpeers> <router-id> [ TABLE_neighbor <neighbor-id> <connectionsdropped> <remoteas> [ <lastflap> ] [ <lastread> ] [ <lastwrite> ] <state> <localport> <remoteport> <notificationssent> <notificationsreceived> ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

sessions

Display session information for all peers

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

local-as

(Optional)

totalpeers

(Optional)

totalestablishedpeers

(Optional)

router-id

(Optional)

localas

(Optional)

vrfpeers

(Optional)

vrfestablishedpeers

(Optional)

TABLE_neighbor

(Optional)

neighbor-id

(Optional)

connectionsdropped

(Optional)

remoteas

(Optional)

lastflap

(Optional)

lastread

(Optional)

lastwrite

(Optional)

state

(Optional)

localport

(Optional)

remoteport

(Optional)

notificationssent

(Optional)

notificationsreceived

(Optional)

Command Mode

- /exec

show bgp statistics

show bgp statistics [ __readonly__ <msgsent> <msgrecvd> <bytesent> <byterecvd> <opensent> <openrecvd> <updatesent> <updaterecvd> <kasent> <karecvd> <notifsent> <notifrecvd> <rrefreshsent> <rrefreshrecvd> <capsent> <caprecvd> ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

statistics

BGP global statistics

__readonly__

(Optional)

msgsent

(Optional)

msgrecvd

(Optional)

bytesent

(Optional)

byterecvd

(Optional)

opensent

(Optional)

openrecvd

(Optional)

updatesent

(Optional)

updaterecvd

(Optional)

kasent

(Optional)

karecvd

(Optional)

notifsent

(Optional)

notifrecvd

(Optional)

rrefreshsent

(Optional)

rrefreshrecvd

(Optional)

capsent

(Optional)

caprecvd

(Optional)

Command Mode

- /exec

show bgp summary

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | all } summary [ __readonly__ TABLE_vrf <vrf-name-out> [ <vrf-id> ] [ <vrf-state> ] [ <vrf-state-rsn> ] [ <vrf-delete-pending> ] [ <vrf-evpn-mpls> ] [ <vrf-vni-id> ] [ <vrf-vni-id-valid> ] [ <vrf-topo-id> ] [ <vrf-encap-type> ] [ <vrf-vtep-ip> ] [ <vrf-vtep-virtual-ip> ] [ <vrf-vtep-vipr> ] [ <vrf-router-mac> ] [ <vrf-vip-router-mac> ] [ <vrf-vipr-router-mac> ] [ <vrf-router-id> ] [ <vrf-cfgd-id> ] [ <vrf-local-as> ] [ <vrf-confed-id> ] [ <vrf-cluster-id> ] [ <vrf-reconnect-interval> ] [ <vrf-peers> ] [ <vrf-pending-peers> ] [ <vrf-est-peers> ] [ <vrf-cfgd-max-as-limit> ] [ <vrf-max-as-limit> ] [ <vrf-rd-configured> ] [ <vrf-rd> ] [ <vrf-pending-rd> ] [ TABLE_af <af-id> [ <af-name> ] [ <af-table-id> ] [ <af-state> ] [ <af-state-rsn> ] [ <af-num-peers> ] [ <af-num-active-peers> ] [ <af-peer-routes> ] [ <af-peer-paths> ] [ <af-peer-networks> ] [ <af-peer-aggregates> ] [ <af-export-rmap> ] [ <af-import-rmap> ] [ <af-retain-rt> ] TABLE_saf <safi> [ <af-name> ] [ <tableversion> ] [ <configuredpeers> ] [ <capablepeers> ] [ <totalnetworks> ] [ <totalpaths> ] [ <memoryused> ] [ <numberattrs> ] [ <bytesattrs> ] [ <numberpaths> ] [ <bytespaths> ] [ <numbercommunities> ] [ <bytescommunities> ] [ <numberclusterlist> ] [ <bytesclusterlist> ] [ <dampening> ] [ <historypaths> ] [ <dampenedpaths> ] [ <softreconfigrecvdpaths> ] [ <softreconfigidenticalpaths> ] [ <softreconfigcombopaths> ] [ <softreconfigfilteredrecvd> ] [ <softreconfigbytes> ] [ TABLE_neighbor <neighborid> [ <neighborversion> ] [ <msgrecvd> ] [ <msgsent> ] [ <neighbortableversion> ] [ <inq> ] [ <outq> ] [ <neighboras> ] [ <time> ] [ <state> ] [ <prefixreceived> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

summary

Display summarized information of BGP state

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional) VRF name

vrf-id

(Optional) VRF ID

vrf-state

(Optional) VRF State

vrf-state-rsn

(Optional) VRF State Reason

vrf-delete-pending

(Optional) VRF delete pending

vrf-evpn-mpls

(Optional) VRF EVPN L3 MPLS

vrf-vni-id

(Optional) VRF VNI ID

vrf-vni-id-valid

(Optional) VRF VNI ID validity

vrf-topo-id

(Optional) VRF Topo ID

vrf-encap-type

(Optional) VRF encapsulation type

vrf-vtep-ip

(Optional) VRF VTEP IP

vrf-vtep-virtual-ip

(Optional) VRF VTEP Virtual IP

vrf-vtep-vipr

(Optional) VRF VTEP Virtual IP for Re-origination

vrf-router-mac

(Optional) VRF Router MAC

vrf-vip-router-mac

(Optional) VRF VIP Router MAC

vrf-vipr-router-mac

(Optional) VRF VIPR Router MAC

vrf-router-id

(Optional) Router ID

vrf-cfgd-id

(Optional) Configured Router-ID

vrf-local-as

(Optional) Local AS

vrf-confed-id

(Optional) Cluster-ID

vrf-cluster-id

(Optional) Cluster-ID

vrf-reconnect-interval

(Optional) VRF reconnect interval

vrf-peers

(Optional) No. of configured peers

vrf-pending-peers

(Optional) No. of pending peers

vrf-est-peers

(Optional) No. of established peers

vrf-cfgd-max-as-limit

(Optional) Configured maxas-limit

vrf-max-as-limit

(Optional) Active maxas-limit

vrf-rd-configured

(Optional) VRF RD Configured

vrf-rd

(Optional) VRF RD

vrf-pending-rd

(Optional) VRF pending RD

TABLE_af

(Optional)

af-id

(Optional) AF ID

af-table-id

(Optional) AF table

af-name

(Optional) AF table name

af-state

(Optional) AF table state

af-state-rsn

(Optional) AF table state reason

af-num-peers

(Optional) No. of peers

af-num-active-peers

(Optional) No. of active peers

af-peer-routes

(Optional) No. of peer routes

af-peer-paths

(Optional) No. of peer paths

af-peer-networks

(Optional) No. of peer networks

af-peer-aggregates

(Optional) No. of aggregates

af-export-rmap

(Optional) Export route-map

af-import-rmap

(Optional) Import route-map

af-retain-rt

(Optional) Retain RT

TABLE_saf

(Optional)

safi

(Optional)

af-name

(Optional)

tableversion

(Optional)

configuredpeers

(Optional)

capablepeers

(Optional)

totalnetworks

(Optional)

totalpaths

(Optional)

memoryused

(Optional)

numberattrs

(Optional)

bytesattrs

(Optional)

numberpaths

(Optional)

bytespaths

(Optional)

numbercommunities

(Optional)

bytescommunities

(Optional)

numberclusterlist

(Optional)

bytesclusterlist

(Optional)

dampening

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

softreconfigrecvdpaths

(Optional)

softreconfigidenticalpaths

(Optional)

softreconfigcombopaths

(Optional)

softreconfigfilteredrecvd

(Optional)

softreconfigbytes

(Optional)

TABLE_neighbor

(Optional)

neighborid

(Optional)

neighborversion

(Optional)

neighboras

(Optional)

msgrecvd

(Optional)

msgsent

(Optional)

neighbortableversion

(Optional)

inq

(Optional)

outq

(Optional)

time

(Optional)

state

(Optional)

prefixreceived

(Optional)

Command Mode

- /exec

show bgp summary

show bgp { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | link-state | l2vpn vpls | ipv4 mvpn | ipv6 mvpn | l2vpn evpn | ipv4 labeled-unicast | all } summary [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <vrf-id> ] [ <vrf-state> ] [ <vrf-state-rsn> ] [ <vrf-delete-pending> ] [ <vrf-evpn-mpls> ] [ <vrf-vni-id> ] [ <vrf-vni-id-valid> ] [ <vrf-topo-id> ] [ <vrf-encap-type> ] [ <vrf-vtep-ip> ] [ <vrf-vtep-virtual-ip> ] [ <vrf-vtep-vipr> ] [ <vrf-router-mac> ] [ <vrf-vip-router-mac> ] [ <vrf-vipr-router-mac> ] [ <vrf-router-id> ] [ <vrf-cfgd-id> ] [ <vrf-local-as> ] [ <vrf-confed-id> ] [ <vrf-cluster-id> ] [ <vrf-reconnect-interval> ] [ <vrf-peers> ] [ <vrf-pending-peers> ] [ <vrf-est-peers> ] [ <vrf-cfgd-max-as-limit> ] [ <vrf-max-as-limit> ] [ <vrf-rd-configured> ] [ <vrf-rd> ] [ <vrf-pending-rd> ] [ TABLE_af <af-id> [ <af-name> ] [ <af-table-id> ] [ <af-state> ] [ <af-state-rsn> ] [ <af-num-peers> ] [ <af-num-active-peers> ] [ <af-peer-routes> ] [ <af-peer-paths> ] [ <af-peer-networks> ] [ <af-peer-aggregates> ] [ <af-export-rmap> ] [ <af-import-rmap> ] [ <af-retain-rt> ] TABLE_saf <safi> [ <af-name> ] [ <tableversion> ] [ <configuredpeers> ] [ <capablepeers> ] [ <totalnetworks> ] [ <totalpaths> ] [ <memoryused> ] [ <numberattrs> ] [ <bytesattrs> ] [ <numberpaths> ] [ <bytespaths> ] [ <numbercommunities> ] [ <bytescommunities> ] [ <numberclusterlist> ] [ <bytesclusterlist> ] [ <dampening> ] [ <historypaths> ] [ <dampenedpaths> ] [ <softreconfigrecvdpaths> ] [ <softreconfigidenticalpaths> ] [ <softreconfigcombopaths> ] [ <softreconfigfilteredrecvd> ] [ <softreconfigbytes> ] [ TABLE_neighbor <neighborid> [ <neighborversion> ] [ <msgrecvd> ] [ <msgsent> ] [ <neighbortableversion> ] [ <inq> ] [ <outq> ] [ <neighboras> ] [ <time> ] [ <state> ] [ <prefixreceived> ] ] ] ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

summary

Display summarized information of BGP state

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

labeled-unicast

Display BGP information for labeled-unicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional) VRF name

vrf-id

(Optional) VRF ID

vrf-state

(Optional) VRF State

vrf-state-rsn

(Optional) VRF State Reason

vrf-delete-pending

(Optional) VRF delete pending

vrf-evpn-mpls

(Optional) VRF EVPN L3 MPLS

vrf-vni-id

(Optional) VRF VNI ID

vrf-vni-id-valid

(Optional) VRF VNI ID validity

vrf-topo-id

(Optional) VRF Topo ID

vrf-encap-type

(Optional) VRF encapsulation type

vrf-vtep-ip

(Optional) VRF VTEP IP

vrf-vtep-virtual-ip

(Optional) VRF VTEP Virtual IP

vrf-vtep-vipr

(Optional) VRF VTEP Virtual IP for Re-origination

vrf-router-mac

(Optional) VRF Router MAC

vrf-vip-router-mac

(Optional) VRF VIP Router MAC

vrf-vipr-router-mac

(Optional) VRF VIPR Router MAC

vrf-router-id

(Optional) Router ID

vrf-cfgd-id

(Optional) Configured Router-ID

vrf-local-as

(Optional) Local AS

vrf-confed-id

(Optional) Cluster-ID

vrf-cluster-id

(Optional) Cluster-ID

vrf-reconnect-interval

(Optional) VRF reconnect interval

vrf-peers

(Optional) No. of configured peers

vrf-pending-peers

(Optional) No. of pending peers

vrf-est-peers

(Optional) No. of established peers

vrf-cfgd-max-as-limit

(Optional) Configured maxas-limit

vrf-max-as-limit

(Optional) Active maxas-limit

vrf-rd-configured

(Optional) VRF RD Configured

vrf-rd

(Optional) VRF RD

vrf-pending-rd

(Optional) VRF pending RD

TABLE_af

(Optional)

af-id

(Optional) AF ID

af-table-id

(Optional) AF table

af-name

(Optional) AF table name

af-state

(Optional) AF table state

af-state-rsn

(Optional) AF table state reason

af-num-peers

(Optional) No. of peers

af-num-active-peers

(Optional) No. of active peers

af-peer-routes

(Optional) No. of peer routes

af-peer-paths

(Optional) No. of peer paths

af-peer-networks

(Optional) No. of peer networks

af-peer-aggregates

(Optional) No. of aggregates

af-export-rmap

(Optional) Export route-map

af-import-rmap

(Optional) Import route-map

af-retain-rt

(Optional) Retain RT

TABLE_saf

(Optional)

safi

(Optional)

af-name

(Optional)

tableversion

(Optional)

configuredpeers

(Optional)

capablepeers

(Optional)

totalnetworks

(Optional)

totalpaths

(Optional)

memoryused

(Optional)

numberattrs

(Optional)

bytesattrs

(Optional)

numberpaths

(Optional)

bytespaths

(Optional)

numbercommunities

(Optional)

bytescommunities

(Optional)

numberclusterlist

(Optional)

bytesclusterlist

(Optional)

dampening

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

softreconfigrecvdpaths

(Optional)

softreconfigidenticalpaths

(Optional)

softreconfigcombopaths

(Optional)

softreconfigfilteredrecvd

(Optional)

softreconfigbytes

(Optional)

TABLE_neighbor

(Optional)

neighborid

(Optional)

neighborversion

(Optional)

neighboras

(Optional)

msgrecvd

(Optional)

msgsent

(Optional)

neighbortableversion

(Optional)

inq

(Optional)

outq

(Optional)

time

(Optional)

state

(Optional)

prefixreceived

(Optional)

Command Mode

- /exec

show boot

show boot [ __readonly__ { [ TABLE_bootvar_show <Str1> ] } ]

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

__readonly__

(Optional)

TABLE_bootvar_show

(Optional) Bootvar table

Str1

(Optional)

Command Mode

- /exec

show boot auto-copy

show boot auto-copy [ __readonly__ { [ TABLE_auto_copy <Str1> ] } ]

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

auto-copy

See if autocopy is turned on

__readonly__

(Optional)

TABLE_auto_copy

(Optional) Auto copy table

Str1

(Optional)

Command Mode

- /exec

show boot auto-copy list

show boot auto-copy list [ __readonly__ { [ TABLE_auto_copy_list <Str1> ] } ]

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

auto-copy

See if autocopy is turned on

list

Show the list of files to be auto-copied

__readonly__

(Optional)

TABLE_auto_copy_list

(Optional) Auto copy table

Str1

(Optional)

Command Mode

- /exec

show boot autocopy-status

show boot autocopy-status

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

autocopy-status

Display the standby autocopy status

Command Mode

- /exec

show boot current

show boot current [ __readonly__ { [ TABLE_bootvar_current <Str1> ] } ]

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

current

Show Current Bootvar Variables

__readonly__

(Optional)

TABLE_bootvar_current

(Optional) Bootvar current table

Str1

(Optional)

Command Mode

- /exec

show boot mode

show boot mode [ __readonly__ { [ TABLE_mode <Str1> ] } ]

Syntax Description

show

Show boot mode information

boot

Show boot mode

mode

See if lxc boot is turned on

__readonly__

(Optional)

TABLE_mode

(Optional) boot mode table

Str1

(Optional)

Command Mode

- /exec

show boot order

show boot order [ __readonly__ { [ TABLE_bootvar_order <Str1> ] } ]

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

order

Show Boot Order

__readonly__

(Optional)

TABLE_bootvar_order

(Optional) Boot order table

Str1

(Optional)

Command Mode

- /exec

show boot sup-1

show boot sup-1 [ __readonly__ { [ TABLE_show_sup1 <Str1> ] } ]

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

sup-1

Enter sup-1 to show the 1st sup config

__readonly__

(Optional)

TABLE_show_sup1

(Optional) Show Sup-1 bootvar table

Str1

(Optional)

Command Mode

- /exec

show boot sup-2

show boot sup-2 [ __readonly__ { [ TABLE_show_sup2 <Str1> ] } ]

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

sup-2

Enter sup-2 to show the 2nd sup config

__readonly__

(Optional)

TABLE_show_sup2

(Optional) Show Sup-22 bootvar table

Str1

(Optional)

Command Mode

- /exec

show boot timings

show boot timings

Syntax Description

show

Show running system information

boot

show boot information

timings

show boot timings

Command Mode

- /exec

show boot variables

show boot variables [ __readonly__ { [ TABLE_boot_vars <Str1> ] } ]

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

variables

Display the list of boot variables

__readonly__

(Optional)

TABLE_boot_vars

(Optional) Show boot variables table

Str1

(Optional)

Command Mode

- /exec

show bootmode

show bootmode [ module <module> ] [ __readonly__ { TABLE_bootmode_info <mod_num> <bootmode> } ]

Syntax Description

show

Show running system information

bootmode

show bootmode of the all linecard modules

module

(Optional) show bootmode of a specific linecard module

module

(Optional) please enter module number

__readonly__

(Optional)

TABLE_bootmode_info

(Optional)

mod_num

(Optional)

bootmode

(Optional)

Command Mode

- /exec

show buffers ip

show buffers ip [ { [ all <count> ] [ free <count> ] } ]

Syntax Description

show

Show running system information

buffers

Display detailed buffer statistics

ip

Display IP buffer information

all

(Optional) Dump buffers from ALL list

free

(Optional) Dump buffers from FREE list

count

(Optional) Number of buffers to dump

Command Mode

- /exec

Chapter 4. C Show Commands

- show callhome

- show callhome destination-profile

- show callhome destination-profile profile

- show callhome destination-profile profile CiscoTAC-1

- show callhome destination-profile profile full-txt-destination

- show callhome destination-profile profile short-txt-destination

- show callhome transport-email

- show callhome transport

- show callhome user-def-cmds

- show catena

- show catena analytics

- show cdp

- show cdp all

- show cdp global

- show cdp neighbors

- show cdp neighbors detail

- show cdp traffic interface2

- show cfs application

- show cfs lock

- show cfs merge status

- show cfs peers

- show cfs regions

- show cfs remote-app vsan domain

- show cfs remote-switches vsan

- show cfs static peers

- show cfs status

- show chassis-family

- show checkpoint

- show checkpoint

- show checkpoint summary

- show class-map

- show class-map type control-plane

- show class-map type network-qos

- show class-map type psp

- show cli alias

- show cli dynamic-cmd

- show cli dynamic integers

- show cli dynamic strings

- show cli history

- show cli interface table

- show cli list

- show cli registry

- show cli syntax

- show cli variables

- show clock

- show clock utc

- show config-profile

- show config-profile applied

- show config-replace log exec

- show config-replace status

- show config-template

- show configuration session

- show configuration session

- show configuration session global-info

- show configuration session nx-api rest

- show configuration session nx-yang json

- show configuration session status

- show configuration session summary

- show configuration session vsh

- show consistency-checker copp

- show consistency-checker dme

- show consistency-checker egress-xlate private-vlan

- show consistency-checker fex-interfaces fex

- show consistency-checker forwarding ipv6 show forwarding ipv6 inconsistency

- show consistency-checker forwarding recover

- show consistency-checker forwarding show forwarding inconsistency

- show consistency-checker forwarding single-route ipv4 vrf

- show consistency-checker l2-tahoe module

- show consistency-checker l2-tahoe switchport interface

- show consistency-checker l2 multicast group source vlan

- show consistency-checker l3-interface module

- show consistency-checker l3 multicast group source vrf

- show consistency-checker link-state fabric-ieth

- show consistency-checker link-state module

- show consistency-checker membership port-channels

- show consistency-checker membership vlan

- show consistency-checker nxapi interface

- show consistency-checker pacl module

- show consistency-checker pacl port-channels

- show consistency-checker port-security

- show consistency-checker qinq

- show consistency-checker qinvni

- show consistency-checker racl module

- show consistency-checker racl port-channels

- show consistency-checker storm-control

- show consistency-checker stp-state vlan

- show consistency-checker vacl

- show consistency-checker vpc

- show consistency-checker vxlan bgp

- show consistency-checker vxlan config-check

- show consistency-checker vxlan flood_list

- show consistency-checker vxlan interface

- show consistency-checker vxlan l3-route vrf

- show consistency-checker vxlan mh mac-addresses

- show consistency-checker vxlan mh pathlist

- show consistency-checker vxlan peers

- show consistency-checker vxlan pv

- show consistency-checker vxlan qinq-qinvni

- show consistency-checker vxlan routes

- show consistency-checker vxlan selective-qinvni

- show consistency-checker vxlan selective-qinvni interface

- show consistency-checker vxlan unicast-nve-peers

- show consistency-checker vxlan vlan

- show consistency-checker vxlan xconnect

- show controller accounting log

- show copp diff profile profile2

- show copp profile

- show copp status

- show copyright

- show cores

- show crypto ca certificates

- show crypto ca certificates

- show crypto ca certstore

- show crypto ca crl

- show crypto ca remote-certstore

- show crypto ca trustpoints

- show crypto ca trustpool

- show crypto ca trustpool last download status

- show crypto ca trustpool policy

- show crypto certificatemap

- show crypto key mypubkey rsa

- show crypto ssh-auth-map

- show crypto ssh-auth-map

- show cts

- show current

show callhome

show callhome [ __readonly__ <output_state> <info> <per_name> [ <name> ] <email_info> [ <email_conf> ] <ph_info> [ <ph_conf> ] <str_addr> [ <str_conf> ] <site_id> [ <site_id_conf> ] <cust_id> [ <cus_id_conf> ] <contr_id> [ <contr_id_conf> ] <swi_pri> [ <swi_pri_value> ] <dup_mess> <per_inv> <per_time> <per_timeofday> <dist> ]

Syntax Description

show

Show running system information

callhome

Show callhome information

__readonly__

(Optional)

output_state

(Optional)

info

(Optional)

per_name

(Optional)

name

(Optional)

email_info

(Optional)

email_conf

(Optional)

ph_info

(Optional)

ph_conf

(Optional)

str_addr

(Optional)

str_conf

(Optional)

site_id

(Optional)

site_id_conf

(Optional)

cust_id

(Optional)

cus_id_conf

(Optional)

contr_id

(Optional)

contr_id_conf

(Optional)

swi_pri

(Optional)

swi_pri_value

(Optional)

dup_mess

(Optional)

per_inv

(Optional)

per_time

(Optional)

per_timeofday

(Optional)

dist

(Optional)

Command Mode

- /exec

show callhome destination-profile

show callhome destination-profile [ __readonly__ { TABLE_call_info [ <dest_full_info> ] [ <dest_short_info> ] [ <dest_xml_info> ] [ <dest_def_info> ] <max_mess_size> <mess_format> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] } ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

__readonly__

(Optional)

TABLE_call_info

(Optional)

dest_full_info

(Optional)

dest_short_info

(Optional)

dest_xml_info

(Optional)

dest_def_info

(Optional)

max_mess_size

(Optional)

mess_format

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome destination-profile profile

show callhome destination-profile profile <s0> [ __readonly__ <user_txt_info> <max_mess_size> <mess_format> <mess_level> <trans_method> <email_info> [ TABLE_email [ <email_conf> ] ] <url_info> [ TABLE_url [ <url_conf> ] ] <alert_groups> [ TABLE_alert [ <alert_conf> ] ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

s0

Show information for user defined destination profile

__readonly__

(Optional)

user_txt_info

(Optional)

max_mess_size

(Optional)

mess_format

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

TABLE_email

(Optional)

email_conf

(Optional)

url_info

(Optional)

TABLE_url

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

TABLE_alert

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome destination-profile profile CiscoTAC-1

show callhome destination-profile profile CiscoTAC-1 [ __readonly__ <tac_xml_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

CiscoTAC-1

Show information for CiscoTAC-1 destination profile

__readonly__

(Optional)

tac_xml_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome destination-profile profile full-txt-destination

show callhome destination-profile profile full-txt-destination [ __readonly__ <full_txt_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

full-txt-destination

Show information for full-txt-destination destination profile

__readonly__

(Optional)

full_txt_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome destination-profile profile short-txt-destination

show callhome destination-profile profile short-txt-destination [ __readonly__ <shrt_txt_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

short-txt-destination

Show information for short-txt-destination destination profile

__readonly__

(Optional)

shrt_txt_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome transport-email

show callhome transport-email [ __readonly__ { <from_email> } [ <reply_to_email> ] [ <return_receipt_addr> ] { <smtp_server> } [ <smtp_server_port> ] ]

Syntax Description

__readonly__

(Optional)

show

Show running system information

callhome

Show callhome information

transport-email

Show callhome email transport configuration

from_email

(Optional)

reply_to_email

(Optional)

return_receipt_addr

(Optional)

smtp_server

(Optional)

smtp_server_port

(Optional)

Command Mode

- /exec

show callhome transport

show callhome transport [ __readonly__ <vrf> <from_email> [ <rep_email> ] [ <ret_email> ] [ <smtp_ser> ] [ <smtp_ser_port> ] [ <smtp_ser_vrf> ] [ <smtp_ser_prior> ] [ <smtp_ser_do> ] [ <smtp_ser_port_do> ] [ <smtp_ser_vrf_do> ] [ <smtp_ser_prior_do> ] [ <smtp_ser_got> ] [ <smtp_ser_port_got> ] [ <smtp_ser_vrf_got> ] [ <smtp_ser_prior_got> ] <http_prox> <http_port> <http_state> ]

Syntax Description

show

Show running system information

callhome

Show callhome information

transport

Show callhome transport configuration (email and http)

__readonly__

(Optional)

vrf

(Optional)

from_email

(Optional)

rep_email

(Optional)

ret_email

(Optional)

smtp_ser

(Optional)

smtp_ser_port

(Optional)

smtp_ser_vrf

(Optional)

smtp_ser_prior

(Optional)

smtp_ser_do

(Optional)

smtp_ser_port_do

(Optional)

smtp_ser_vrf_do

(Optional)

smtp_ser_prior_do

(Optional)

smtp_ser_got

(Optional)

smtp_ser_port_got

(Optional)

smtp_ser_vrf_got

(Optional)

smtp_ser_prior_got

(Optional)

http_prox

(Optional)

http_port

(Optional)

http_state

(Optional)

Command Mode

- /exec

show callhome user-def-cmds

show callhome user-def-cmds [ __readonly__ { <user_configured_cmds> } [ { TABLE_user_def_cmds <alert_group> <user_defined_cmds> } ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

user-def-cmds

Show the cli commands configured for each alert group

__readonly__

(Optional)

user_configured_cmds

(Optional) List of user configured commands

TABLE_user_def_cmds

(Optional)

alert_group

(Optional)

user_defined_cmds

(Optional)

Command Mode

- /exec

show catena

show catena <instance-name> [ brief ] [ __readonly__ <instance_name> <state> { TABLE_chain <chain> [ TABLE_rule <seqno> <aclname> <whichconfig> [ <vlan_group> ] [ <ingress_port> ] [ <egress_port> ] [ <egress_device> ] [ <mode> ] [ <l2_lb> ] ] } ]

Syntax Description

show

Show running system information

catena

catena

instance-name

instance name

brief

(Optional) brief

__readonly__

(Optional) Read Only

instance_name

(Optional) instance_name

state

(Optional) status

TABLE_chain

(Optional)

chain

(Optional) chain

TABLE_rule

(Optional)

seqno

(Optional) seqno

aclname

(Optional) aclname

whichconfig

(Optional) whichconfig

vlan_group

(Optional) vlangrp

ingress_port

(Optional) ingress_portgrp

egress_port

(Optional) egress_portgrp

egress_device

(Optional) egress_device

mode

(Optional) mode

l2_lb

(Optional) L2 Load Balance

Command Mode

- /exec

show catena analytics

show catena analytics { per-acl { per-node | per-device-group } | per-catena-instance <instance-name> [ per-chain [ <chain-id> ] ] } [ __readonly__ <instance_name> <per_node> <per_node_total> <per_node_total_val> <chain_id> <per_device_group> <per_device_group_hdr> <per_device_group_val> <stats_counter> ]

Syntax Description

show

Show running system information

catena

catena

analytics

show analytics for catena

per-acl

per ACL

per-node

per Node

per-device-group

per Device group

per-catena-instance

per Catena Instance

instance-name

Name of Catena Instance

per-chain

(Optional) per Chain

chain-id

(Optional) chain ID

__readonly__

(Optional) Read Only

instance_name

(Optional) Catena Instance name

chain_id

(Optional) Chain ID

per_node

(Optional) per Node

per_node_total

(Optional) per Node total

per_node_total_val

(Optional) per Node total val

per_device_group

(Optional) per Device Group

per_device_group_hdr

(Optional) per Device Group Header

per_device_group_val

(Optional) per Device Group Val

stats_counter

(Optional) stats_counter

Command Mode

- /exec

show cdp

show cdp { entry { all1 | name <s0> } } [ __readonly__ TABLE_cdp_entry_all <device_id> [ <sysname> ] [ { <v4addr> | <v6addr> } + ] <platform_id> <capability> + <intf_id> <port_id> <ttl> <version> <version_no> [ <nativevlan> ] [ <vtpname> ] [ <duplexmode> ] [ <syslocation> ] [ { <v4mgmtaddr> | <v6mgmtaddr> } + ] ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

entry

Show CDP entries in database

all1

Show all CDP entries in database

name

Show a specific CDP entry matching a name

s0

__readonly__

(Optional) Read only

TABLE_cdp_entry_all

(Optional) output of show cdp entry all

device_id

(Optional) Device Identifier

sysname

(Optional) System Name

v4addr

(Optional) Interface IP V4 Address

v6addr

(Optional) Interface IP V6 Address

platform_id

(Optional) Platform Id

capability

(Optional) Capability

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

ttl

(Optional) Hold Time

version

(Optional) Software Version

version_no

(Optional) CDP version number

nativevlan

(Optional) NativeVLAN

vtpname

(Optional) Vtp Management Domain Name

duplexmode

(Optional) Duplex Mode

syslocation

(Optional) System Location

v4mgmtaddr

(Optional) IP V4 Mgmt Address

v6mgmtaddr

(Optional) IP V6 Mgmt Address

Command Mode

- /exec

show cdp all

show cdp { all | interface <if0> } [ __readonly__ TABLE_cdp_all <intf_id> <port_up> [ <cdp_global_enabled> ] <cdp_intf_enabled> [ <oper_mode> ] <refresh_time> <ttl> ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

all

Show all interfaces in CDP database

interface

Show CDP parameters for an interface

if0

__readonly__

(Optional) Read only

TABLE_cdp_all

(Optional) output of show cdp all

intf_id

(Optional) Interface Id

port_up

(Optional) Port status

cdp_global_enabled

(Optional) CDP global status

cdp_intf_enabled

(Optional) CDP interface status

oper_mode

(Optional) CDP operation mode

refresh_time

(Optional) Refresh Time

ttl

(Optional) Hold Time

Command Mode

- /exec

show cdp global

show cdp global [ __readonly__ <cdp_global_enabled> <refresh_time> <ttl> <v2_advertisement> <deviceid_format> ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

global

Show CDP global parameters

__readonly__

(Optional) Read only

cdp_global_enabled

(Optional) CDP global status

refresh_time

(Optional) Refresh Time

ttl

(Optional) Hold Time

v2_advertisement

(Optional) Show v2 advertisement

deviceid_format

(Optional) Show deviceId Format

Command Mode

- /exec

show cdp neighbors

show cdp neighbors [ interface <if> ] [ __readonly__ { TABLE_cdp_neighbor_brief_info <ifindex> <device_id> <intf_id> <ttl> <capability> + <platform_id> <port_id> } { <neigh_count> } ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

neighbors

Show CDP neighbors

interface

(Optional) Show CDP neighbors on an interface

if

(Optional) Specify Interface

__readonly__

(Optional) Read only

TABLE_cdp_neighbor_brief_info

(Optional) output of show cdp neighbor - in breif

ifindex

(Optional) Interface index

device_id

(Optional) System Name (or) Device Identifier

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

platform_id

(Optional) Platform Id

ttl

(Optional) Hold Time

capability

(Optional) Capability

neigh_count

(Optional) Neighbor Count

Command Mode

- /exec

show cdp neighbors detail

show cdp neighbors [ interface <if> ] detail [ __readonly__ TABLE_cdp_neighbor_detail_info <ifindex> <device_id> [ <sysname> ] [ <vtpname> ] <numaddr> [ { <v4addr> | <v6addr> } + ] <platform_id> <capability> + <intf_id> <port_id> <ttl> <version> <version_no> [ <nativevlan> ] [ <duplexmode> ] [ <mtu> ] [ <syslocation> ] [ <num_mgmtaddr> [ { <v4mgmtaddr> | <v6mgmtaddr> } + ] ] ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

neighbors

Show CDP neighbors

detail

Show CDP neighbors detailed

interface

(Optional) Show CDP neighbors on an interface

if

(Optional) Specify Interface

__readonly__

(Optional) Read only

TABLE_cdp_neighbor_detail_info

(Optional) output of show cdp neighbor detail

ifindex

(Optional) Interface index

device_id

(Optional) Device Identifier

sysname

(Optional) System Name

vtpname

(Optional) Vtp Management Domain Name

numaddr

(Optional) No of IP Address configured

v4addr

(Optional) Interface IP V4 Address

v6addr

(Optional) Interface IP V6 Address

platform_id

(Optional) Platform Id

capability

(Optional) Capability

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

ttl

(Optional) Hold Time

version

(Optional) Software Version

version_no

(Optional) CDP version number

nativevlan

(Optional) NativeVLAN

duplexmode

(Optional) Duplex Mode

mtu

(Optional) MTU

syslocation

(Optional) System Location

num_mgmtaddr

(Optional) No of Mgmt Address configured

v4mgmtaddr

(Optional) IP V4 Mgmt Address

v6mgmtaddr

(Optional) IP V6 Mgmt Address

Command Mode

- /exec

show cdp traffic interface2

show cdp traffic interface2 <if2> [ __readonly__ <intf_id> <total_input_packets> <valid_cdp_packets> <input_v1_packets> <input_v2_packets> <invalid_cdp_packets> <unsupported_version> <checksum_errors> <malformed_packets> <total_output_packets> <output_v1_packets> <output_v2_packets> <send_errors> ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

traffic

Show CDP traffic statistics

interface2

Show CDP traffic statistics on an interface

if2

__readonly__

(Optional) Read only

intf_id

(Optional) Interface Id

total_input_packets

(Optional) Total input cdp packets

valid_cdp_packets

(Optional) Total valid cdp packets

input_v1_packets

(Optional) Input vesrion1 packets

input_v2_packets

(Optional) Input vesrion2 packets

invalid_cdp_packets

(Optional) Invalid cdp packets

unsupported_version

(Optional) Packets having unsupported version

checksum_errors

(Optional) Packets having checksum errors

malformed_packets

(Optional) Total malformed packets

total_output_packets

(Optional) Total output packets

output_v1_packets

(Optional) Output vesrion1 packets

output_v2_packets

(Optional) Output vesrion2 packets

send_errors

(Optional) Number of send errors

Command Mode

- /exec

show cfs application

show cfs application [ { name <cfs-dyn-app-name> | sap <i0> } ] [ __readonly__ [ { enabled <enabled> } { timeout <timeout> } { merge_capable <merge_capable> } { scope <scope> } { region <region> } ] [ { TABLE_apps <app_name> <app_enabled> <app_scope> } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

application

Show locally registered applications

name

(Optional) Show local application information by name

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) Show local application information by sap

i0

(Optional) Registered sap of the local application

__readonly__

(Optional)

enabled

(Optional) whether application is CFS enabled

enabled

(Optional) whether application is CFS enabled

timeout

(Optional) timeout

timeout

(Optional) timeout

merge_capable

(Optional) merge_capable

merge_capable

(Optional) merge_capable

scope

(Optional) scope

scope

(Optional) scope

region

(Optional) region

region

(Optional) region

TABLE_apps

(Optional) all cfs applications

app_name

(Optional) name of cfs application

app_enabled

(Optional) whether application is cfs enabled

app_scope

(Optional) distribution scope of cfs application

Command Mode

- /exec

show cfs lock

show cfs lock [ { name <cfs-dyn-app-name> | sap <i1> } ] [ __readonly__ [ { TABLE_locks [ <app_name> ] <app_scope> [ <vsan> ] [ <domain> ] [ <wwn> ] <ip_addr> <u_name> <u_type> [ <hostname> ] } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

lock

Show state of application's logical/physical locks

name

(Optional) Application name for which the lock status is required

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) Application sap for which the lock status is required

i1

(Optional) Application SAP

__readonly__

(Optional)

TABLE_locks

(Optional) table of all CFS locks

app_name

(Optional) name of CFS application

app_scope

(Optional) scope of CFS application

vsan

(Optional) vsan

domain

(Optional) domain

wwn

(Optional) wwn of switch holding CFS lock

ip_addr

(Optional) ip address of switch holding CFS lock

u_name

(Optional) user name

u_type

(Optional) user type

hostname

(Optional) hostname

Command Mode

- /exec

show cfs merge status

show cfs merge status [ { name <cfs-dyn-app-name> [ detail ] | sap <i1> [ detail2 ] } ] [ __readonly__ [ { scope <scope> } ] [ { merge_status <status> } ] [ { failure_reason <reason> } ] [ { TABLE_all_merge <app_name> <scope> <vsan> <status> } ] [ { TABLE_local_fabric [ <domain> ] <wwn> <ip_addr> <app_scope> [ <master> ] [ <hostname> ] } ] [ { TABLE_remote_fabric [ <domain> ] <wwn> <ip_addr> <app_scope> [ <master> ] [ <hostname> ] } ] [ { TABLE_remaining_fabric [ <domain> ] <wwn> <ip_addr> [ <hostname> ] } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

merge

Show cfs merge information

status

Show status of merge

name

(Optional) Show merge status by name

cfs-dyn-app-name

(Optional) Registered name of the local application

detail

(Optional) Show merge status by name in detail

sap

(Optional) Show merge status by sap

i1

(Optional) Application sap

detail2

(Optional) Show merge status by sap in detail

__readonly__

(Optional)

scope

(Optional) distribution scope of application

scope

(Optional) scope

merge_status

(Optional) status

status

(Optional) status

failure_reason

(Optional) reason

reason

(Optional) reason

TABLE_all_merge

(Optional) all

app_name

(Optional) name

scope

(Optional) scope

vsan

(Optional) vsan

status

(Optional) status

TABLE_local_fabric

(Optional) local fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

app_scope

(Optional) scope

master

(Optional) master

hostname

(Optional) hname

TABLE_remote_fabric

(Optional) remote fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

app_scope

(Optional) scope

master

(Optional) master

hostname

(Optional) hname

TABLE_remaining_fabric

(Optional) remote fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

hostname

(Optional) hname

Command Mode

- /exec

show cfs peers

show cfs peers [ { name <cfs-dyn-app-name> | sap <i1> } ] [ __readonly__ [ { scope <scope> } ] [ { TABLE_peers <wwn> <ip_addr> [ <local> ] [ <hostname> ] [ <domain> ] } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

peers

Show all the peers in the physical fabric

name

(Optional) Show peers for given application name

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) Show peers for given application sap

i1

(Optional) Application sap

__readonly__

(Optional)

scope

(Optional) scope

scope

(Optional) scope

TABLE_peers

(Optional) all peers

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

local

(Optional) local

hostname

(Optional) hname

domain

(Optional) domain

Command Mode

- /exec

show cfs regions

show cfs regions [ { brief [ region <i0> ] | name <cfs-dyn-app-name> | region1 <i1> } ] [ __readonly__ [ { region <id> } ] [ { application <name> } ] [ { scope <scope> } ] [ { TABLE_PEERS <wwn> <ip_addr> <local> [ <hostname> ] [ <domain> ] } ] [ { TABLE_switches [ <wwn> ] [ <ip_addr> ] <region> <app_name> <enabled> [ <scope> ] } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

regions

Show all the applications with peers and region information

brief

(Optional) Show all configured regions and applications(no peers)

region

(Optional) Show all configured applications(no peers)

i0

(Optional) Region Id

name

(Optional) Show peers and region information for a given application

cfs-dyn-app-name

(Optional) Registered name of the local application

region1

(Optional) Show all configured applications with peers

i1

(Optional) Region Id

__readonly__

(Optional)

region

(Optional) region

id

(Optional) id

application

(Optional) app

name

(Optional) name

scope

(Optional) scope

scope

(Optional) scope

TABLE_PEERS

(Optional) all region peers

wwn

(Optional) wwn

ip_addr

(Optional) ip_address

local

(Optional) local

hostname

(Optional) hname

domain

(Optional) domain

TABLE_switches

(Optional) all switches in region

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

region

(Optional) region

app_name

(Optional) name

enabled

(Optional) enabled

scope

(Optional) scope

Command Mode

- /exec

show cfs remote-app vsan domain

show cfs remote-app vsan <i0> domain <i1>

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

remote-app

Show remote cfs registered applications

vsan

Show remote applications given a vsan

i0

VSAN id

domain

Show remote applications

i1

Enter the domain id

Command Mode

- /exec

show cfs remote-switches vsan

show cfs remote-switches vsan <i0> [ __readonly__ { local <domain> } [ { TABLE_switches <remote_domain> <wwn> } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

remote-switches

Show remote switches on a given vsan

vsan

Show remote switches on a given vsan

i0

VSAN id

__readonly__

(Optional)

local

(Optional) local

domain

(Optional) domain

TABLE_switches

(Optional) all remote switches

remote_domain

(Optional) rdomain

wwn

(Optional) wwn

Command Mode

- /exec

show cfs static peers

show cfs static peers

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

static

Show all static peers with status

peers

Show all configured static peers with status

Command Mode

- /exec

show cfs status

show cfs status [ __readonly__ { distribution <distribution> } { distribution_over_ip <dist_over_ip> } { ipv4_multicast_address <ipv4_mcast_addr> } { ipv6_multicast_address <ipv6_mcast_addr> } { distribution_over_ethernet <dist_over_eth> } ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

status

Show current status of CFS

__readonly__

(Optional)

distribution

(Optional) runtime status of CFS distribution

distribution

(Optional) operational status of CFS distribution

distribution_over_ip

(Optional) runtime information of CFSoIP

dist_over_ip

(Optional) operational status of CFS overIP

ipv4_multicast_address

(Optional) ipv4 multicast address

ipv4_mcast_addr

(Optional) ipv4 multicast address

ipv6_multicast_address

(Optional) ipv6 multicast address

ipv6_mcast_addr

(Optional) ipv6 multicast address

distribution_over_ethernet

(Optional) runtime status if CFSoE

dist_over_eth

(Optional) operations status of CFSoE

Command Mode

- /exec

show chassis-family

show chassis-family

Syntax Description

show

Show running system information

chassis-family

Show chassis family type

Command Mode

- /exec

show checkpoint

show checkpoint <chkpoint_name> [ all ] [ __readonly__ TABLE_checkpoint_details <name1> <checkpoint_config> + ]

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoint contents

chkpoint_name

Checkpoint name

all

(Optional) Show default config

__readonly__

(Optional) Read only

TABLE_checkpoint_details

(Optional) Checkpoint details

name1

(Optional) Checkpoint name

checkpoint_config

(Optional) Configuration entry from checkpoint

Command Mode

- /exec

show checkpoint

show checkpoint [ all ] [ user | system ] [ __readonly__ TABLE_checkpoint_details <name> <checkpoint_config> + ]

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoints

all

(Optional) Show default config

user

(Optional) Show only user configuration rollback checkpoints

system

(Optional) Show only system configuration rollback checkpoints

__readonly__

(Optional) Read only

TABLE_checkpoint_details

(Optional) checkpoint details

name

(Optional) Checkpoint name

checkpoint_config

(Optional) Configuration entry from checkpoint

Command Mode

- /exec

show checkpoint summary

show checkpoint summary [ user | system ] [ __readonly__ TABLE_checkpoint_header_info <name> <user_name> <timestamp> <file_path> <chkpt_type> <description> ]

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoints

summary

Show configuration rollback checkpoints summary

user

(Optional) Show only user configuration rollback checkpoints summary

system

(Optional) Show only system configuration rollback checkpoints summary

__readonly__

(Optional) Read only

TABLE_checkpoint_header_info

(Optional) Checkpoint header info

user_name

(Optional) Username

name

(Optional) Checkpoint name

file_path

(Optional) Checkpoint name

timestamp

(Optional) Timestamp of checkpoint creation

chkpt_type

(Optional) Type of checkpoint either user or system

description

(Optional) Checkpoint description

Command Mode

- /exec

show class-map

show class-map [ { [ type qos ] [ <cmap-name> | xxx <color-map-enum-name> ] } | { type queuing [ yyy <cmap-enum-name> | zzz <default-cmap-enum-name> | <cmap-dce-name> | <cmap-name-hque> ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> [ <id> ] <xqos-or-q> [ <any_or_all> ] <cmap-name-out> [ <desc> ] [ TABLE_match <match-key> [ <not> ] [ <dscp-list> ] [ <precedence-list> ] [ <cos-list> ] [ <qos-group-list> ] [ <discard-class-list> ] [ <vlan-list> ] [ <match-cmap-name> ] [ <match-acl-name> ] [ <note-string> ] [ <pkt-len-list> ] [ <rtp-port-list> ] [ <roce-port-list> ] [ <prot> ] [ <input-iface-list> ] [ <exp-list> ] [ <cl-def> ] ] ] } ]

Syntax Description

xxx

(Optional) xxx

yyy

(Optional) yyy

zzz

(Optional) zzz

show

Show running system information

class-map

Show class maps

type

(Optional) Type of the class-map

qos

(Optional) type qos

queuing

(Optional) type queuing

cmap-name

(Optional) class map name

cmap-enum-name

(Optional)

default-cmap-enum-name

(Optional)

cmap-dce-name

(Optional) Queuing class-map name

cmap-name-hque

(Optional) Hierarchical class-map name

color-map-enum-name

(Optional)

__readonly__

(Optional)

display-all

(Optional) Display all kinds of class-maps

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

cmap-name-out

(Optional) Class-map name

xqos-or-q

(Optional)

any_or_all

(Optional) Enter match-any or match-all

id

(Optional) Class-map ID

desc

(Optional) Description string

not

(Optional) Negate this match result

dscp-list

(Optional) List of DSCP values

precedence-list

(Optional) List of precedence values

cos-list

(Optional) List of class-of-service values

qos-group-list

(Optional) List of qos-group values

discard-class-list

(Optional) List of discard-class values

vlan-list

(Optional) List of vlan-ids

match-cmap-name

(Optional) class-map name

match-acl-name

(Optional) Match class-map name

note-string

(Optional) Placeholder string param to display any info in string format

pkt-len-list

(Optional) Packet length multi-range

rtp-port-list

(Optional) IP RTP UDP port multi-range

roce-port-list

(Optional) IP ROCE UDP port multi-range

prot

(Optional) Protocol

input-iface-list

(Optional) Input Interface multi-range

exp-list

(Optional) List of MPLS exp values

cl-def

(Optional) Match any criteria for class-default only

Command Mode

- /exec

show class-map type control-plane

show class-map type control-plane [ <cmap-name> ] [ __readonly__ [ { TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] ] } ] ]

Syntax Description

show

Show running system information

class-map

Show class maps

type

Type of the class-map

control-plane

This is for copp policy

cmap-name

(Optional) Name of the class-map

__readonly__

(Optional)

TABLE_cmap

(Optional) all cmap xml sessions

cmap-name-out

(Optional) Name of the class-map

cmap-key

(Optional) Class-map name: xml key

opt_any_or_all

(Optional) Enter match-any or match-all

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

access_grp

(Optional)

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

Command Mode

- /exec

show class-map type network-qos

show class-map type network-qos [ <cmap-name-nq> ] [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> <xcmap-name> [ <desc> ] [ <cos-list> ] [ <qos-group-list> ] [ <protocol> ] ] } ]

Syntax Description

show

Show running system information

class-map

Show class maps

type

Type of the class-map

cmap-name-nq

(Optional) Class-map name

network-qos

type network-qos

__readonly__

(Optional)

display-all

(Optional) Display all network-qos class-maps

TABLE_cmap

(Optional) all network-qos cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

desc

(Optional) Description string

xcmap-name

(Optional) Class-map name

protocol

(Optional) protocol

cos-list

(Optional) List of class-of-service values

qos-group-list

(Optional) List of qos-group values

Command Mode

- /exec

show class-map type psp

show class-map type psp { [ <cmap-name-plc> [ client <clienttype> <clientID> ] [ cfg-mode <cfgmode> ] ] | [ handle <ppf_id> ] } [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> [ <id> ] [ <any_or_all> ] [ <__inline__> ] [ class-default ] <cmap-name-out> [ <desc> ] [ TABLE_match <match-key> [ <not> ] [ <any> ] [ <cos-list> ] [ <mac_src> <mac_src_wild> ] [ <mac_dest> <mac_dest_wild> ] [ <eth-value> ] [ <vlan-number> ] [ <tos-value> ] [ <ip-protocol-value> ] [ <ip-s-addr> <ip-s-mask> ] [ <ip-d-addr> <ip-d-mask> ] [ <tcp-src-port-addr> ] [ <tcp-dest-port-addr> ] [ <udp-src-port-addr> ] [ <udp-dest-port-addr> ] [ <interface-name> ] [ <ipv6-s-addr> <ipv6-s-mask> ] [ <ipv6-d-addr> <ipv6-d-mask> ] [ <dscp-list> ] ] ] } ]

Syntax Description

show

Show running system information

class-map

Show class maps

type

Type of the class-map

psp

type psp

cmap-name-plc

(Optional) Class-map name

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

cfg-mode

(Optional) cfg-mode

cfgmode

(Optional) persistent/transient

handle

(Optional) Handle

ppf_id

(Optional) PPF ID

__readonly__

(Optional)

display-all

(Optional) Display all kinds of class-maps

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

class-default

(Optional)

cmap-name-out

(Optional) Class-map name

any_or_all

(Optional) Enter match-any or match-all

__inline__

(Optional) Inline class

id

(Optional) Class-map ID

desc

(Optional) Description string

not

(Optional) Negate this match result

any

(Optional) Wildcard match

cos-list

(Optional) List of class-of-service values

mac_src

(Optional) Source MAC address

mac_src_wild

(Optional) Source MAC mask

mac_dest

(Optional) Destination MAC address

mac_dest_wild

(Optional) Destination MAC mask

eth-value

(Optional) Ethernet type

vlan-number

(Optional) Vlan number

tos-value

(Optional) IPv4 TOS

ip-protocol-value

(Optional) IPV4 protocol

ip-s-addr

(Optional) IP address in format a.b.c.d

ip-d-addr

(Optional) IP address in format a.b.c.d

ip-s-mask

(Optional) IP address Mask in format a.b.c.d

ip-d-mask

(Optional) IP address Mask in format a.b.c.d

tcp-src-port-addr

(Optional) Transport layer port number

tcp-dest-port-addr

(Optional) Transport layer port number

udp-src-port-addr

(Optional) Transport layer port number

udp-dest-port-addr

(Optional) Transport layer port number

interface-name

(Optional) Physical interface Name and Number

dscp-list

(Optional) List of DSCP values

Command Mode

- /exec

show cli alias

show cli alias [ name <s0> ] [ __readonly__ { TABLE_cli_alias <alias> <name> } ]

Syntax Description

show

Show running system information

cli

Show CLI information

alias

Display the alias configuration

name

(Optional) Display a specific alias

s0

(Optional) Specify the alias

__readonly__

(Optional)

TABLE_cli_alias

(Optional) cli alias table

alias

(Optional) alias

name

(Optional) name

Command Mode

- /exec

show cli dynamic-cmd

show cli dynamic-cmd

Syntax Description

show

Show running system information

cli

CLI commands

dynamic-cmd

Display the list of dynamic commands(cli)

Command Mode

- /exec

show cli dynamic integers

show cli dynamic integers [ <name> ] [ __readonly__ TABLE_dynamic_integers <name-o> <min> <max> ]

Syntax Description

show

Show running system information

cli

CLI commands

dynamic

Display current range of dynamic parameters

integers

Display current range of dynamic integer parameters

name

(Optional) name of the dynamic parameter

__readonly__

(Optional)

TABLE_dynamic_integers

(Optional)

name-o

(Optional)

min

(Optional)

max

(Optional)

Command Mode

- /exec

show cli dynamic strings

show cli dynamic strings [ <name> ] [ __readonly__ TABLE_dynamic_strings <name-o> <value> + ]

Syntax Description

show

Show running system information

cli

CLI commands

dynamic

Display current range of dynamic parameters

strings

Display current range of dynamic string parameters

name

(Optional) name of the dynamic parameter

__readonly__

(Optional)

TABLE_dynamic_strings

(Optional)

name-o

(Optional)

value

(Optional)

Command Mode

- /exec

show cli history

show cli history [ this-mode-only | exec-mode | config-mode ] [ <count> | unformatted ] +

Syntax Description

show

Show running system information

cli

debug cli

history

history of cli commands

count

(Optional) number of lines to display (from end)

unformatted

(Optional) display just the commands

this-mode-only

(Optional) display history from current mode only

exec-mode

(Optional) display history of exec commands only

config-mode

(Optional) display history of config commands only

Command Mode

- /exec

show cli interface table

show cli interface table

Syntax Description

show

show

cli

cli

interface

interface

table

table

Command Mode

- /exec

show cli list

show cli list [ detail | recurse | <component> | <max-per-cmd> ] +

Syntax Description

show

Show running system information

cli

Show CLI information

list

show

component

(Optional) component

max-per-cmd

(Optional) max

recurse

(Optional) go

detail

(Optional) formats

Command Mode

- /exec

show cli registry

show cli registry [ ctags | tags | modes | session | inherit ]

Syntax Description

show

Show running system information

cli

registry

ctags

(Optional)

tags

(Optional)

modes

(Optional)

session

(Optional)

inherit

(Optional)

Command Mode

- /exec

show cli syntax

show cli syntax [ long | recurse ] + [ has-xml-out | has-no-xml-out | is-data-modeled ] [ roles [ network-admin | network-operator | <roles-mask> ] ]

Syntax Description

show

Show running system information

cli

Show CLI information

syntax

show

long

(Optional) use

recurse

(Optional) also

has-xml-out

(Optional) show

has-no-xml-out

(Optional) show

is-data-modeled

(Optional) show

roles

(Optional) show

network-admin

(Optional) show

network-operator

(Optional) show

roles-mask

(Optional) show

Command Mode

- /exec

show cli variables

show cli variables [ __readonly__ <switchname> <timestamp> [ { TABLE_variable <key> <value> } ] [ { TABLE_session_variable <key> <value> } ] ]

Syntax Description

show

Show running system information

cli

Show CLI information

variables

Show CLI variables

__readonly__

(Optional)

switchname

(Optional) Switch Name

timestamp

(Optional) Timestamp

TABLE_variable

(Optional) Variable table

key

(Optional) key

value

(Optional) value

TABLE_session_variable

(Optional) Session variable table

key

(Optional) key

value

(Optional) value

Command Mode

- /exec

show clock

show clock [ detail ] [ __readonly__ { <simple_time> <time_source> [ <daylight_zone> <daylight_start_week> <daylight_start_weekday> <daylight_start_month> <daylight_start_time> <daylight_end_week> <daylight_end_weekday> <daylight_end_month> <daylight_end_time> <daylight_utc_min_offset> ] } ]

Syntax Description

show

Show running system information

clock

Display current Date

detail

(Optional) Display current date and summertime configuration

__readonly__

(Optional)

simple_time

(Optional) simple clock format

time_source

(Optional) Time source

daylight_zone

(Optional) summer-time daylight zone

daylight_start_week

(Optional) daylight start week

daylight_start_weekday

(Optional) daylight start weekday

daylight_start_month

(Optional) daylight start month

daylight_start_time

(Optional) daylight start time

daylight_end_week

(Optional) daylight end week

daylight_end_weekday

(Optional) daylight end weekday

daylight_end_month

(Optional) daylight end month

daylight_end_time

(Optional) daylight end time

daylight_utc_min_offset

(Optional) daylight utc offset

Command Mode

- /exec

show clock utc

show clock utc

Syntax Description

show

Show running system information

clock

Display current Date

utc

Display current time in UTC

Command Mode

- /exec

show config-profile

show config-profile [ name <all_conf_profile_name> ] [ __readonly__ TABLE_conf_profile_all <conf_profile_name> { [ <conf_profile_desc> ] <conf_profile_cfg> + [ <conf_profile_applied> ] + [ <conf_profile_include> ] + } ]

Syntax Description

show

Show running system information

config-profile

Show config-profiles

name

(Optional) config-profile name

all_conf_profile_name

(Optional) Enter the name of configuration profile

__readonly__

(Optional)

TABLE_conf_profile_all

(Optional)

conf_profile_name

(Optional)

conf_profile_desc

(Optional)

conf_profile_cfg

(Optional)

conf_profile_applied

(Optional)

conf_profile_include

(Optional)

Command Mode

- /exec

show config-profile applied

show config-profile { applied [ auto | manually ] | non-applied } [ match-name <profile_substring> ] [ __readonly__ [ <profiles> ] + ]

Syntax Description

show

Show running system information

config-profile

Show config-profiles

applied

List of config-profiles that are applied

auto

(Optional) List of config-profiles that are applied via auto-config

manually

(Optional) List of all config-profiles which were applied directly from cli

non-applied

List of config-profiles that are not applied

match-name

(Optional) List of all config-profiles that have matching sub-string

__readonly__

(Optional)

profiles

(Optional)

profile_substring

(Optional) Enter a substring to match with config-profile name

Command Mode

- /exec

show config-replace log exec

show config-replace log { exec | verify } [ __readonly__ [ <log_entry> + ] ]

Syntax Description

show

Show running system information

config-replace

Show config-replace

log

show config-replace log

exec

show config-replace execution log

verify

show config-replace verify log

__readonly__

(Optional) Read only

log_entry

(Optional) log entry from configure replace log

Command Mode

- /exec

show config-replace status

show config-replace status [ __readonly__ <last_operation> [ <config_replace_type> ] [ <name> ] [ <start_time> ] [ <end_time> ] [ <operation_status> ] [ <commit_status> ] [ <commit_timeout_remaining> ] ]

Syntax Description

show

Show running system information

config-replace

show config-replace

status

show status of last configure replace operation

__readonly__

(Optional) Read only

last_operation

(Optional) last operation

config_replace_type

(Optional) config-replace type

name

(Optional) name

start_time

(Optional) start time

end_time

(Optional) end time

operation_status

(Optional) operation status

commit_status

(Optional) Commit status

commit_timeout_remaining

(Optional) commit timeout remaining

Command Mode

- /exec

show config-template

show config-template [ [ <template-name> ] [ status [ { vrf <vrf-name> } ] ] ] [ __readonly__ { TABLE_profile <name> <refcount> <type> [ TABLE_cfg <cfg> ] [ TABLE_status <vrfname> <status> ] } ]

Syntax Description

show

Show running system information

config-template

config-template

template-name

(Optional) config-template name

status

(Optional) config-template status

vrf

(Optional) VRF referencing config-template

vrf-name

(Optional) config-template name

__readonly__

(Optional)

TABLE_profile

(Optional)

name

(Optional) config-template name

refcount

(Optional) Ref count of VRFs using this config-template

type

(Optional) config-template type

TABLE_cfg

(Optional)

cfg

(Optional) profile config

TABLE_status

(Optional)

vrfname

(Optional) profile config

status

(Optional) profile status

Command Mode

- /exec

show configuration session

show configuration session <s3> [ __readonly__ <ssn-name> [ TABLE_session_details [ <ssn-cmd-num> ] [ <command> ] ] ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

s3

Shows configuration session given a name

__readonly__

(Optional) Read only

ssn-name

(Optional)

TABLE_session_details

(Optional) Show session details for given name

ssn-cmd-num

(Optional)

command

(Optional)

Command Mode

- /exec

show configuration session

show configuration session [ __readonly__ [ TABLE_session_all <ssn-name> [ TABLE_session_all_cmd [ <ssn-cmd-num> ] [ <command> ] ] ] <activesesscnt> ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

__readonly__

(Optional) Read only

TABLE_session_all

(Optional) Show session table

ssn-name

(Optional)

TABLE_session_all_cmd

(Optional) Show session related commands

ssn-cmd-num

(Optional)

command

(Optional)

activesesscnt

(Optional) Number of active configuration sessions

Command Mode

- /exec

show configuration session global-info

show configuration session global-info [ __readonly__ <max-ssns> <max-cmds> <curr-num-ssns> <curr-num-cmds> ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

global-info

Show configuration sessions global-info

__readonly__

(Optional) Read only

max-ssns

(Optional)

max-cmds

(Optional)

curr-num-ssns

(Optional)

curr-num-cmds

(Optional)

Command Mode

- /exec

show configuration session nx-api rest

show configuration session nx-api rest [ with-dn ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

nx-api

NX-API

rest

NX-API REST JSON format

with-dn

(Optional) include the DN/RN in the output

Command Mode

- /exec

show configuration session nx-yang json

show configuration session nx-yang { json | xml }

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

nx-yang

NXOS YANG

json

NXOS YANG JSON format

xml

NXOS YANG XML format

Command Mode

- /exec

show configuration session status

show configuration session status [ <s3> ] [ __readonly__ [ TABLE_session_status <ssn-name> <last-action> <ac-status> <ac-reason> <ac-tstamp> [ <failed-cmd-num> ] [ <failed-cmd> ] [ <last-vfy-cmd-num> ] [ <last-vfy-cmd> ] [ <last-vfy-tstamp> ] [ <rollback-status> ] ] ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

status

Show configuration session-mgr status

s3

(Optional) Shows configuration session status given a name

__readonly__

(Optional) Read only

TABLE_session_status

(Optional) Show session status table

ssn-name

(Optional)

last-action

(Optional) Last Action

ac-status

(Optional) Last Action Status

ac-reason

(Optional) Last Action Reason

ac-tstamp

(Optional) Last Action Timestamp

failed-cmd-num

(Optional) Failed Command Number

failed-cmd

(Optional) Failed Command

last-vfy-cmd-num

(Optional) Last Verified Command Number

last-vfy-cmd

(Optional) Last Verified Command

last-vfy-tstamp

(Optional) Last Verified Command Timestamp

rollback-status

(Optional) Rollback Status

Command Mode

- /exec

show configuration session summary

show configuration session summary [ __readonly__ [ TABLE_session_summary <ssn-name> <username> <tstamp> ] [ <activesesscnt> ] ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

summary

Show summary of the active configuration sessions

__readonly__

(Optional) Read only

TABLE_session_summary

(Optional) Show session summary table

ssn-name

(Optional)

username

(Optional) Session Owner

tstamp

(Optional) Creation Time

activesesscnt

(Optional) Number of active configuration sessions

Command Mode

- /exec

show configuration session vsh

show configuration session <s3> vsh [ __readonly__ <ssn-name> [ TABLE_session_details_vsh [ <ssn-cmd-num> ] [ <command> ] ] ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

s3

Shows configuration session given a name

vsh

__readonly__

(Optional) Read only

TABLE_session_details_vsh

(Optional) Show session details for given name on vsh

ssn-name

(Optional)

ssn-cmd-num

(Optional)

command

(Optional)

Command Mode

- /exec

show consistency-checker copp

show consistency-checker copp

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

copp

Verify copp programming from software context

Command Mode

- /exec

show consistency-checker dme

show consistency-checker dme

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

dme

DME (ObjectStore)

Command Mode

- /exec

show consistency-checker egress-xlate private-vlan

show consistency-checker egress-xlate private-vlan <vlan>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

egress-xlate

Check PVLAN egress-xlate

private-vlan

Verifies private-vlan egress-xlate in the hardware

vlan

Enter private-vlan id

Command Mode

- /exec

show consistency-checker fex-interfaces fex

show consistency-checker fex-interfaces fex <id>

Syntax Description

show

Show running system information

fex

Limit display to interfaces on this fex

id

Enter module number

consistency-checker

Consistency Checker

fex-interfaces

Compares software and hardware state of fex interfaces

Command Mode

- /exec

show consistency-checker forwarding ipv6 show forwarding ipv6 inconsistency

show consistency-checker forwarding ipv6 [ unicast ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding ipv6 [ unicast ] inconsistency [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> ]

Syntax Description

show

show

consistency-checker

Consistency Checker

forwarding

Display Forwarding Information

inconsistency

route inconsistency check

ipv6

ipv6

unicast

(Optional) unicast

vrf

(Optional) check routes for a specific VRF

vrf-name

(Optional) VRF name

module

(Optional) check routes for a specific module

module

(Optional) module number

all_modules

(Optional) all module's

all_vrfs

(Optional) all vrf's

__readonly__

(Optional)

TABLE_inconsistency

(Optional)

idipv6

(Optional)

slotipv6

(Optional)

unitipv6

(Optional)

vrfipv6

(Optional)

interfaceipv6

(Optional)

reasonipv6

(Optional)

Command Mode

- /exec

show consistency-checker forwarding recover

show consistency-checker forwarding recover

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

forwarding

Display Forwarding Information

recover

Recover inconsistent routes

Command Mode

- /exec

show consistency-checker forwarding show forwarding inconsistency

show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding [ ip | ipv4 ] [ unicast ] inconsistency [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> ]

Syntax Description

show

show

consistency-checker

Consistency Checker

forwarding

Display Forwarding Information

inconsistency

route inconsistency check

ip

(Optional) ipv4

ipv4

(Optional) ipv4

unicast

(Optional) unicast

vrf

(Optional) check routes for a specific VRF

vrf-name

(Optional) VRF name

module

(Optional) check routes for a specific module

module

(Optional) module number

all_modules

(Optional) all module's

all_vrfs

(Optional) all vrf's

__readonly__

(Optional)

TABLE_inconsistency

(Optional)

id

(Optional)

slot

(Optional)

unit

(Optional)

vrf

(Optional)

ipaddr

(Optional)

ipprefix

(Optional)

interface

(Optional)

reason

(Optional)

Command Mode

- /exec

show consistency-checker forwarding single-route ipv4 vrf

show consistency-checker forwarding single-route { ipv4 | ipv6 } <ip-prefix> vrf <vrf-name>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

forwarding

Display Forwarding Information

single-route

Run the consistency checker for a single route

ipv4

IPv4 address

ipv6

IPv6 address

ip-prefix

Specify an IP prefix/mask

vrf

check routes for a specific VRF

vrf-name

vrf name

Command Mode

- /exec

show consistency-checker l2-tahoe module

show consistency-checker l2-tahoe module <module> [ unit <unit> ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

l2 consistency

module

Module to run the consistency-checker on

module

Enter module number

unit

(Optional) Unit to run the consistency checker on

unit

(Optional) Enter unit number

Command Mode

- /exec

show consistency-checker l2-tahoe switchport interface

show consistency-checker l2-tahoe switchport interface <if_name>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

l2 consistency

switchport

Switchport Interface

interface

interface

if_name

Physical or Logical interface

Command Mode

- /exec

show consistency-checker l2 multicast group source vlan

show consistency-checker l2 multicast group <grp-address> source <src-address> vlan <vlan-id>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2

l2 consistency

multicast

multicast related information

group

Do consistency check for group

grp-address

group IP address

source

Do consistency check for source

src-address

source IP address

vlan

Do consistency check for vlan

vlan-id

vlan number

Command Mode

- /exec

show consistency-checker l3-interface module

show consistency-checker l3-interface module <moduleid>

Syntax Description

show

Show running system information

module

Limit display to interfaces on module

moduleid

Enter module number

consistency-checker

Consistency Checker

l3-interface

Compares software and hardware properties of L3 interfaces

Command Mode

- /exec

show consistency-checker l3 multicast group source vrf

show consistency-checker l3 multicast group <grp-address> source <src-address> vrf <vrf-string>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l3

l3 consistency

multicast

multicast related information

group

Do consistency check for group

grp-address

group IP address

source

Do consistency check for source

src-address

source IP address

vrf

Do consistancy check for vrf

vrf-string

Vrf string

Command Mode

- /exec

show consistency-checker link-state fabric-ieth

show consistency-checker link-state fabric-ieth { [ module <module> ] }

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

link-state

Compares software and hardware link state of interfaces

fabric-ieth

Internal Fabric ports

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

Command Mode

- /exec

show consistency-checker link-state module

show consistency-checker link-state module <module>

Syntax Description

show

Show running system information

module

Limit display to interfaces on module

module

Enter module number

consistency-checker

Consistency Checker

link-state

Compares software and hardware link state of interfaces

Command Mode

- /exec

show consistency-checker membership port-channels

show consistency-checker membership port-channels [ interface <ch-id> ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

membership

Check various memberships

port-channels

Verifies port channel membership in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

Command Mode

- /exec

show consistency-checker membership vlan

show consistency-checker membership vlan <vlanid> [ private-vlan [ interface [ <int-id> | <ch-id> ] ] ] [ native-vlan ]

Syntax Description

show

Show running system information

vlan

Verifies vlan membership in the hardware

vlanid

Enter vlan id

consistency-checker

Consistency Checker

membership

Check various memberships

private-vlan

(Optional) Check private-vlan primary vlan

interface

(Optional) Interface

int-id

(Optional) Interface name

ch-id

(Optional) Port-Channel name

native-vlan

(Optional) Check for native vlans

Command Mode

- /exec

show consistency-checker nxapi interface

show consistency-checker nxapi interface

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

nxapi

Nxapi

interface

Compares interface configs between dme and pss

Command Mode

- /exec

show consistency-checker pacl module

show consistency-checker pacl module <module>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

module

Limit display to L2 interfaces on this module

module

Enter module number

Command Mode

- /exec

show consistency-checker pacl port-channels

show consistency-checker pacl port-channels [ interface <ch-id> ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

port-channels

Verifies port channel pacl programming in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

Command Mode

- /exec

show consistency-checker port-security

show consistency-checker port-security [ module <mod> [ interface <intf-id> ] ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

port-security

Port-Security information

module

(Optional) Module

interface

(Optional) Port-security interface

intf-id

(Optional) Port-security interace

mod

(Optional) Module Number

Command Mode

- /exec

show consistency-checker qinq

show consistency-checker qinq

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

qinq

QinQ consistency checker

Command Mode

- /exec

show consistency-checker qinvni

show consistency-checker qinvni

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

qinvni

QinVNI consistency checker

Command Mode

- /exec

show consistency-checker racl module

show consistency-checker racl module <module>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

module

Limit display to L3 interfaces on this module

module

Enter module number

Command Mode

- /exec

show consistency-checker racl port-channels

show consistency-checker racl port-channels [ interface <ch-id> ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

port-channels

Verifies port channel racl programming in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

Command Mode

- /exec

show consistency-checker storm-control

show consistency-checker storm-control

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

storm-control

Storm control consistency checker

Command Mode

- /exec

show consistency-checker stp-state vlan

show consistency-checker stp-state vlan <vlan>

Syntax Description

show

Show running system information

vlan

Verifies spanning tree state in the hardware for all interfaces in the vlan

vlan

Enter vlan id

consistency-checker

Consistency Checker

stp-state

Verify spanning tree state in the hardware

Command Mode

- /exec

show consistency-checker vacl

show consistency-checker vacl

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vacl

Verify vacl programming in the hardware

Command Mode

- /exec

show consistency-checker vpc

show consistency-checker vpc [ source-interface [ <int-id> | <ch-id> ] ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vpc

vPC related information

source-interface

(Optional) Source vPC member

int-id

(Optional) Eth Interface

ch-id

(Optional) Port-Channel

Command Mode

- /exec

show consistency-checker vxlan bgp

show consistency-checker vxlan bgp

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

bgp

Display VxLAN BGP EVPN consistency information

Command Mode

- /exec

show consistency-checker vxlan config-check

show consistency-checker vxlan config-check

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

config-check

Check the inconsistencies in the config

Command Mode

- /exec

show consistency-checker vxlan flood_list

show consistency-checker vxlan flood_list

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

flood_list

Display VxLAN Floodlist consistency information

Command Mode

- /exec

show consistency-checker vxlan interface

show consistency-checker vxlan interface { <int-id> | <ch-id> }

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

interface

Interface

int-id

Interface

ch-id

Port-Channel name

Command Mode

- /exec

show consistency-checker vxlan l3-route vrf

show consistency-checker vxlan l3-route <l3-route> vrf <vrf-string>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

vxlan related information

l3-route

Do consistency check for route

l3-route

L3 Route IP Address

vrf

Do consistancy check for vrf

vrf-string

Vrf string

Command Mode

- /exec

show consistency-checker vxlan mh mac-addresses

show consistency-checker vxlan mh mac-addresses

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

mh

VxLAN BGP EVPN Multi Homing CC commands

mac-addresses

Check mac address consistency between L2RIB and L2FM

Command Mode

- /exec

show consistency-checker vxlan mh pathlist

show consistency-checker vxlan mh pathlist

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

mh

VxLAN BGP EVPN Multi Homing CC commands

pathlist

Check Vxlan BGP EVPN MH Control plane and resultant pathlists consistency

Command Mode

- /exec

show consistency-checker vxlan peers

show consistency-checker vxlan peers

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

peers

Display VxLAN peers consistency information

Command Mode

- /exec

show consistency-checker vxlan pv

show consistency-checker vxlan pv

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

pv

pv consistency checker

Command Mode

- /exec

show consistency-checker vxlan qinq-qinvni

show consistency-checker vxlan qinq-qinvni

Syntax Description

show

Show running system information

vxlan

VxLAN consistency checker

consistency-checker

Consistency Checker

qinq-qinvni

QinQ consistency checker

Command Mode

- /exec

show consistency-checker vxlan routes

show consistency-checker vxlan routes

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

routes

Display VxLAN L3 routes consistency information

Command Mode

- /exec

show consistency-checker vxlan selective-qinvni

show consistency-checker vxlan selective-qinvni

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

selective-qinvni

Selective QinVNI consistency checker

Command Mode

- /exec

show consistency-checker vxlan selective-qinvni interface

show consistency-checker vxlan selective-qinvni interface { <int-id> | <ch-id> }

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

selective-qinvni

Selective QinVNI consistency checker

interface

Interface

int-id

Interface

ch-id

Port-Channel name

Command Mode

- /exec

show consistency-checker vxlan unicast-nve-peers

show consistency-checker vxlan unicast-nve-peers

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

unicast-nve-peers

Display VxLAN Unicast NVE Peers consistency information

Command Mode

- /exec

show consistency-checker vxlan vlan

show consistency-checker vxlan vlan { <vlanid> | all }

Syntax Description

show

Show running system information

vxlan

VxLAN consistency checker

vlan

Verifies flood list programming for vxlan vlans

consistency-checker

Consistency Checker

vlanid

Enter vlan id

all

Check CC for all vxlans

Command Mode

- /exec

show consistency-checker vxlan xconnect

show consistency-checker vxlan xconnect

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

xconnect

Cross-Connect consistency checker

Command Mode

- /exec

show controller accounting log

show controller <ctrl-id> accounting log

Syntax Description

show

Show running system information

controller

Controller command

ctrl-id

Controller id value

accounting

Accounting

log

Show log information

Command Mode

- /exec

show copp diff profile profile2

show copp diff profile <profile_type> [ prior-ver ] profile2 <profile_type2>

Syntax Description

show

Show running system information

copp

Control-Plane Policing

diff

Difference between CoPP Profiles

profile

CoPP Profile

profile_type

CoPP Profile Types

prior-ver

(Optional) Previous Configured Version

profile2

CoPP Profile

profile_type2

CoPP Profile Types

Command Mode

- /exec

show copp profile

show copp profile { strict | moderate | lenient | dense } [ __readonly__ { TABLE_coppprof <acl-type> { <acl-grp-name> { TABLE_sequence <permitdeny> [ { <proto_str> | <proto> | <ip> | <ipv6> } ] { [ <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_addrgrp> | <src_mac_any> | <src_mac_addr> <src_mac_mask> ] } [ <src_port_op> { <src_port1_str> | <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_addrgrp> | <dest_mac_any> | <dest_mac_addr> <dest_mac_mask> } [ <dest_port_op> { <dest_port1_str> | <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] [ <eth_proto> ] } } } <newline> [ { TABLE_classmap <opt_any_or_all> [ <cmap_name> ] [ { access_grp <acc_grp_name> + } ] [ { redirect <opt_match_redirect> + } ] [ { exception <opt_match_excpt> + } ] [ { protocol <opt_match_protocol> + } ] } ] [ { TABLE_policymap [ <class-name> ] [ <pmap_name> ] [ <set_vld_flg> ] [ { cos [ inner ] <cos-val> } ] [ { dscp [ tunnel ] [ <dscp-val> ] } ] [ { precedence [ tunnel1 ] [ <prec-val> ] } ] [ <policer_show_flags> ] [ <cir> ] [ <opt_kbps_mbps_gbps_pps_cir> ] [ { percent <cir-perc> } ] [ <bc> + ] [ <opt_kbytes_mbytes_gbytes_bc> + ] [ <pir> ] [ <opt_kbps_mbps_gbps_pps_pir> ] [ { percent1 <pir-perc> } ] [ <be> ] [ <opt_kbytes_mbytes_gbytes_be> ] [ <opt_drop_transmit_conform> ] [ <opt_drop_transmit_violate> ] [ { { [ <opt_drop_transmit_conform1> ] } | { set-cos-transmit [ <set-cos-val> ] } | { set-dscp-transmit [ <set-dscp-val> ] } | { set-prec-transmit [ <set-prec-val> ] } } ] [ { { [ <opt_drop_transmit_exceed> ] } | { set dscp1 dscp2 table cir-markdown-map } } ] [ { { [ <opt_drop_transmit_violate1> ] } | { set1 dscp3 dscp4 table1 pir-markdown-map } } ] } ] ]

Syntax Description

show

Show running system information

copp

Control-Plane Policing

profile

CoPP Profile

strict

display strict profile

moderate

display moderate profile

lenient

display lenient profile

dense

display dense profile

__readonly__

(Optional) Read Only

acl-type

(Optional) access-list type

TABLE_coppprof

(Optional) copp profile

acl-grp-name

(Optional) name of the access-list

TABLE_sequence

(Optional) ACE RULE SYNTAX TABLE

permitdeny

(Optional) permit/deny

proto

(Optional) A protocol number

proto_str

(Optional) Protocol name

ip

(Optional) IP

ipv6

(Optional) IPV6

src_any

(Optional) SRCAny

dest_any

(Optional) DESTAny

src_ip_prefix

(Optional) Source IP prefix

src_ip_addr

(Optional) Source IP address

src_ip_mask

(Optional) Source IP mask

src_mac_addr

(Optional) Source MAC address

src_mac_mask

(Optional) Source MAC mask

src_mac_any

(Optional) SRCMACAny

dest_ip_prefix

(Optional) Destination IP prefix

dest_ip_addr

(Optional) Destination IP address

dest_ip_mask

(Optional) Destination IP mask

dest_mac_addr

(Optional) Destination MAC address

dest_mac_mask

(Optional) Destination MAC mask

dest_mac_any

(Optional) DESTMACAny

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port1_str

(Optional) Source port name

src_port1_num

(Optional) Source port number

src_port2_str

(Optional) Source port name

src_port2_num

(Optional) Source port number

dest_port1_str

(Optional) Destination port name

dest_port1_num

(Optional) Destination port number

dest_port2_str

(Optional) Destination port name

dest_port2_num

(Optional) Destination port number

icmp_type

(Optional) ICMP type

icmp_code

(Optional) ICMP code

icmp_str

(Optional) ICMP message

icmpv6_type

(Optional) ICMP type

icmpv6_code

(Optional) ICMP code

icmpv6_str

(Optional) ICMP message

src_addrgrp

(Optional) Source address group

dest_addrgrp

(Optional) Destination address group

src_portgrp

(Optional) Source port group

dest_portgrp

(Optional) Destination port group

eth_proto

(Optional) MAC protocol number

newline

(Optional) newline between access-list and cmaps

TABLE_classmap

(Optional) Class Map

opt_any_or_all

(Optional) Enter match-any or match-all

cmap_name

(Optional) Name of the class-map

access_grp

(Optional) Access Group

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

TABLE_policymap

(Optional) Policy Map table

class-name

(Optional) Name if the policy member

pmap_name

(Optional) Name of the Policy-map

set_vld_flg

(Optional) Set valid flag

cos-val

(Optional) Set cos val

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

(Optional)

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

opt_drop_transmit_conform

(Optional) Set the action

opt_drop_transmit_violate

(Optional) Set the action

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional)

opt_kbytes_mbytes_gbytes_be

(Optional) Units

opt_drop_transmit_conform1

(Optional) Set the action

set-cos-transmit

(Optional)

set-cos-val

(Optional) Conform action cos val

set-dscp-transmit

(Optional)

set-dscp-val

(Optional) Conform action dscp val

set-prec-transmit

(Optional)

set-prec-val

(Optional) Conform action prec val

policer_show_flags

(Optional) Policer show flags

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional)

dscp1

(Optional)

dscp2

(Optional)

table

(Optional)

cir-markdown-map

(Optional)

opt_drop_transmit_violate1

(Optional) Set the action

set1

(Optional)

dscp3

(Optional)

dscp4

(Optional)

table1

(Optional)

pir-markdown-map

(Optional)

cos

(Optional)

inner

(Optional)

dscp

(Optional)

tunnel

(Optional)

dscp-val

(Optional) Set dscp val

precedence

(Optional)

tunnel1

(Optional)

prec-val

(Optional) Set prec val

Command Mode

- /exec

show copp status

show copp status [ __readonly__ { last_config_operation <last_cfg_oper> } { last_config_operation_time <last_cfg_oper_time> } { last_config_operation_status <last_cfg_oper_status> } [ last_config_operation_error_time <last_cfg_oper_error_time> ] [ last_config_operation_error <last_cfg_oper_error> ] { service_policy <srv_policy> } ]

Syntax Description

show

Show running system information

copp

Control-Plane Policing

status

Show the internal status of CoPP

__readonly__

(Optional)

last_config_operation

(Optional) last config operation

last_cfg_oper

(Optional) last config operation

last_config_operation_time

(Optional) timestamp of last config operation

last_cfg_oper_time

(Optional) timestamp of last config operation

last_config_operation_status

(Optional) status of last config operation

last_cfg_oper_status

(Optional) status of last config operation

last_config_operation_error_time

(Optional) timestamp of last config operation's error

last_cfg_oper_error_time

(Optional) timestamp of last config operation's error

last_config_operation_error

(Optional) last config operation's error

last_cfg_oper_error

(Optional) last config operation's error

service_policy

(Optional) policy-map attached to control-plane

srv_policy

(Optional) policy-map attached to control-plane

Command Mode

- /exec

show copyright

show copyright [ __readonly__ { <content> } ]

Syntax Description

show

Show running system information

copyright

Copyright information

__readonly__

(Optional)

content

(Optional) Copyrigh information

Command Mode

- /exec

show cores

show cores [ vdc-all | { vdc [ <e-vdc2> | <vdc-id> ] } ] [ __readonly__ { [ TABLE_cores <vdc_id> <module_id> <instance> <process_name> <pid> <sys_time> ] } ]

Syntax Description

show

Show running system information

cores

show all core dumps for the current vdc

vdc-all

(Optional) show core dumps from all vdcs

vdc

(Optional) show all core dumps for the vdc

__readonly__

(Optional)

TABLE_cores

(Optional)

vdc_id

(Optional) vdc id

module_id

(Optional) module id

instance

(Optional) instance number

process_name

(Optional) name of the process

pid

(Optional) process id

sys_time

(Optional) core generate time

e-vdc2

(Optional) Enter VDC <vdc-id>

vdc-id

(Optional) vdc number

Command Mode

- /exec

show crypto ca certificates

show crypto ca certificates [ __readonly__ [ { TABLE_ca_certificates <trustpoint> [ <certificate> ] [ { TABLE_ca_cert_chains <index> <ca_certificate> } ] } ] ]

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

certificates

show various certificates

__readonly__

(Optional)

TABLE_ca_certificates

(Optional) Table of CA certificates

trustpoint

(Optional) Trustpoint name

certificate

(Optional) Certificate

TABLE_ca_cert_chains

(Optional) Table of CA certificates in chain

index

(Optional) CA Certificate Index

ca_certificate

(Optional) CA certificate

Command Mode

- /exec

show crypto ca certificates

show crypto ca certificates <s0> [ __readonly__ { Trustpoint <trustpoint> } [ { Certificate <certificate> } ] [ { TABLE_ca_cert_chains <index> <ca_certificate> } ] ]

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

certificates

show various certificates

s0

trustpoint label

__readonly__

(Optional)

Trustpoint

(Optional) Trustpoint

trustpoint

(Optional) Trustpoint

Certificate

(Optional) Certificate

certificate

(Optional) Certificate

TABLE_ca_cert_chains

(Optional) Table of CA certificates in chain

index

(Optional) CA Certificate Index

ca_certificate

(Optional) CA certificate

Command Mode

- /exec

show crypto ca certstore

show crypto ca certstore [ __readonly__ { certstore_lookup <lookup_type> } ]

Syntax Description

show

Show running system information

crypto

Show crypto configuration

ca

show crypto ca configuration

certstore

Show the configured certstore

__readonly__

(Optional)

certstore_lookup

(Optional) Certificate strore lookup

lookup_type

(Optional) Lookup type

Command Mode

- /exec

show crypto ca crl

show crypto ca crl <s0> [ __readonly__ { Trustpoint <trustpoint> } [ { CRL <crl> } ] ]

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

crl

show CRL

s0

trustpoint label

__readonly__

(Optional)

Trustpoint

(Optional) Trustpoint

trustpoint

(Optional) Trustpoint

CRL

(Optional) Certificate Revocation List

crl

(Optional) Certificate Revocation List

Command Mode

- /exec

show crypto ca remote-certstore

show crypto ca remote-certstore [ __readonly__ { remote_cert_store <rem_cert_store> } [ { crl_timer <crltimer> } { ldap_server_group <ldap_server_grp> } ] ]

Syntax Description

show

Show running system information

crypto

Show crypto configuration

ca

show crypto ca configuration

remote-certstore

Show remote certstore configuration

__readonly__

(Optional)

remote_cert_store

(Optional) Remote cert store

rem_cert_store

(Optional) Remote certificate store

crl_timer

(Optional) CRL timer

crltimer

(Optional) CRL timer

ldap_server_group

(Optional) LDAP Server Group

ldap_server_grp

(Optional) LDAP Server Group

Command Mode

- /exec

show crypto ca trustpoints

show crypto ca trustpoints [ __readonly__ [ { TABLE_ca_truspoints <trustpoint> <key-pair> [ { TABLE_revocation_methods <revocation-method> } ] [ <ocsp-url> ] } ] ]

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

trustpoints

show trustpoint configuration

__readonly__

(Optional)

trustpoint

(Optional) Trustpoint

key-pair

(Optional) Key pair

TABLE_revocation_methods

(Optional) Table of revocation methods

revocation-method

(Optional) Revocation mehtod

ocsp-url

(Optional) OCSP URL

TABLE_ca_truspoints

(Optional) Table of CA trustpoints

Command Mode

- /exec

show crypto ca trustpool

show crypto ca trustpool [ __readonly__ [ { TABLE_ca_trustpool <serial-number> <subject> <issued-by> <validity-start> <validity-end> } ] ]

Syntax Description

show

Show running system information

crypto

show crypto information

ca

show trustpool data

trustpool

trustpool contents

__readonly__

(Optional)

TABLE_ca_trustpool

(Optional) Table of CA trustpool

serial-number

(Optional) Serial number

subject

(Optional) subject

issued-by

(Optional) Issued by

validity-start

(Optional) validity start date

validity-end

(Optional) validity end date

Command Mode

- /exec

show crypto ca trustpool last download status

show crypto ca trustpool last download status [ __readonly__ [ http_url <http_url> ] [ download_time <download_time> ] [ trustpool_download_status <status> ] [ download_failure <reason> ] ]

Syntax Description

show

Show running system information

crypto

show crypto information

ca

show trustpool data

trustpool

trustpool data

last

last trustpool download status

download

download of trustpool

status

download status

__readonly__

(Optional)

http_url

(Optional) http url configured

http_url

(Optional) HTTP url

download_time

(Optional) Download time

download_time

(Optional) Download time

trustpool_download_status

(Optional) Status of trutspool policy download

status

(Optional) Download status

download_failure

(Optional) Download failure

reason

(Optional) Download failure reason

Command Mode

- /exec

show crypto ca trustpool policy

show crypto ca trustpool policy [ __readonly__ [ http_url <http_url> ] [ config_vrf [ <config_vrf> ] [ <src_intf> ] ] [ proxy_server [ <proxy_server> ] [ <proxy_server_port> ] ] ]

Syntax Description

show

Show running system information

crypto

show crypto information

ca

show Certificate authority related config

trustpool

show trustpool policy

policy

trustpool configuration

__readonly__

(Optional)

http_url

(Optional) http url configured

http_url

(Optional) HTTP url

config_vrf

(Optional) Configured vrf

config_vrf

(Optional) vrf configured

src_intf

(Optional) source interface for vrf

proxy_server

(Optional) Configured proxy server

proxy_server

(Optional) proxy server

proxy_server_port

(Optional) proxy server port

Command Mode

- /exec

show crypto certificatemap

show crypto certificatemap [ __readonly__ [ { TABLE_certmap <map_name> <subject_name> <alternate_email> <alternate_upn> } ] ]

Syntax Description

show

Show running system information

crypto

show crypto configuration

certificatemap

show certificatemap filters

__readonly__

(Optional)

TABLE_certmap

(Optional) Table of Certificate Map

map_name

(Optional) Map name

subject_name

(Optional) Subject name

alternate_email

(Optional) Alternate Email

alternate_upn

(Optional) Alternate UPN

Command Mode

- /exec

show crypto key mypubkey rsa

show crypto key mypubkey rsa [ __readonly__ [ { TABLE_rsa_keys <key_label> <key_size> <exportable> <err_string> } ] ]

Syntax Description

show

Show running system information

crypto

show crypto configuration

key

show key configuration

mypubkey

show my public keys configuration

rsa

show my rsa public keys configuration

__readonly__

(Optional)

TABLE_rsa_keys

(Optional) Table of RSA keys

key_label

(Optional) Key Lable

key_size

(Optional) Key size

exportable

(Optional) Exportable

err_string

(Optional) Error String

Command Mode

- /exec

show crypto ssh-auth-map

show crypto ssh-auth-map

Syntax Description

show

Show running system information

crypto

show crypto configuration

ssh-auth-map

show mapping filters applied for ssh authentication

Command Mode

- /exec

show crypto ssh-auth-map

show crypto ssh-auth-map [ __readonly__ [ { TABLE_ssh_auth_map <issuer_name> <map1> [ <map2> ] } ] ]

Syntax Description

show

Show running system information

crypto

show crypto configuration

ssh-auth-map

show mapping filters applied for ssh authentication

__readonly__

(Optional)

TABLE_ssh_auth_map

(Optional) Table of SSH Auth MAP

issuer_name

(Optional) Issuer Name

map1

(Optional) Map 1

map2

(Optional) Map 2

Command Mode

- /exec

show cts

show cts [ __readonly__ <device-id> <cache_en> <num-dot1x> <num-man> <sgt> ]

Syntax Description

cts

Show CTS global configuration

__readonly__

(Optional)

device-id

(Optional) name

cache_en

(Optional) enable/disable

num-dot1x

(Optional) number of interfaces in dot1x mode

num-man

(Optional) number of interfaces in manual mode

sgt

(Optional)

Command Mode

- /exec

show current

show current

Syntax Description

show

Display region configurations

current

Display mst configuration currently used

Command Mode

- /exec/configure/spanning-tree/mst/configuration

Chapter 5. D Show Commands

- show dampening interface

- show diagnostic bootup level

- show diagnostic content module

- show diagnostic description module test all

- show diagnostic events

- show diagnostic ondemand setting

- show diagnostic result module

- show diagnostic result module all

- show diagnostic simulation module

- show diagnostic status module

- show diff rollback-patch

- show dot1q-tunnel

- show dot1q-tunnel interface

- show dot1x

- show dot1x all

- show dot1x all details

- show dot1x all statistics

- show dot1x all summary

- show dot1x interface

- show dot1x interface client statistics

- show dot1x interface client statistics address

- show dot1x supplicant

- show dot1x supplicant interface

show dampening interface

show dampening interface

Syntax Description

show

Show running system information

dampening

Display dampening information

interface

Display interface dampening general information

Command Mode

- /exec

show diagnostic bootup level

show diagnostic bootup level [ __readonly__ <bootup_level> ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

bootup

Show diagnostic bootup information

level

Show diagnostic bootup level information

__readonly__

(Optional)

bootup_level

(Optional) Bootup level

Command Mode

- /exec

show diagnostic content module

show diagnostic content module { all | <module> } [ __readonly__ <attr_descr> { TABLE_Module <module_id> <module_type> { TABLE_test <test_id> <testname> <test_attr> <test_interval> } } ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

content

Show diagnostic test content

module

Module Keyword

all

Select all module ID

module

Module number

__readonly__

(Optional)

attr_descr

(Optional) Attribute description

TABLE_Module

(Optional) All modules table

module_id

(Optional) Module Number

module_type

(Optional) module type description

TABLE_test

(Optional) All tests table

test_id

(Optional) Test id

testname

(Optional) Test name

test_attr

(Optional) Test Attribute

test_interval

(Optional) HM test interval

Command Mode

- /exec

show diagnostic description module test all

show diagnostic description module <module> test { all | <name> | <test-id> } [ __readonly__ { TABLE_desc <testname> <testdesc> } ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

description

Show diagnostic test desc

module

Module keyword

module

Module Number

test

Diagnostic test selection

all

Select all test ID

name

Test name

test-id

__readonly__

(Optional)

TABLE_desc

(Optional) Table of test description

testname

(Optional) Test name

testdesc

(Optional) Description of the test

Command Mode

- /exec

show diagnostic events

show diagnostic events [ error | info ] [ __readonly__ { TABLE_events <event_text> } ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

events

Diagnostic events

error

(Optional) Error event-type

info

(Optional) Information event-type

__readonly__

(Optional)

TABLE_events

(Optional) list of events logged

event_text

(Optional) Text of one event

Command Mode

- /exec

show diagnostic ondemand setting

show diagnostic ondemand setting [ __readonly__ <test_iteration_count> <action_on_failure> ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

ondemand

Show diagnostic on demand information

setting

Show diagnostic on demand settings

__readonly__

(Optional)

test_iteration_count

(Optional) Iteration Count

action_on_failure

(Optional) Action on failure

Command Mode

- /exec

show diagnostic result module

show diagnostic result module <module> [ test { <name> | <test-id> } ] { [ detail ] | [ statistics ] } [ __readonly__ <module_id> <curr_diag_level> <module_name> [ <bootup_diag_level> ] [ { TABLE_TestStat <stat_testid> <stat_testname> { TABLE_StatDetail <port_no> <packet_tx> <packet_rx> <packet_loss> } } ] [ { TABLE_Test <test_id> <testname> [ <testresult> ] [ { <passed_ports> <failed_ports> <incomplete_ports> <untested_ports> <aborted_ports> <err_disabled_ports> } ] [ { <err_code> <total_run_count> <last_execution_time> <first_failure_time> <last_failure_time> <last_pass_time> <total_fail_count> <consequtive_fail_count> <last_fail_reason> <next_execution_time> } ] } ] ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

result

Show diagnostic test result

module

Module keyword

module

Module number

test

(Optional) Diagnostic test selection

test-id

(Optional)

name

(Optional) Test name

detail

(Optional) Detailed result

statistics

(Optional) Result statistics

__readonly__

(Optional)

module_id

(Optional) Module ID

curr_diag_level

(Optional) Current diag level

module_name

(Optional) Module name

bootup_diag_level

(Optional) Diagnostic level at bootup

TABLE_TestStat

(Optional) Statistics table

stat_testid

(Optional) Test id

stat_testname

(Optional) Test name

TABLE_StatDetail

(Optional) Table stats detail

port_no

(Optional) Port Number

packet_tx

(Optional) Packet Tx

packet_rx

(Optional) Packet Rx

packet_loss

(Optional) Packet lost

TABLE_Test

(Optional) Table of tests in module

test_id

(Optional) Test id of tests

testname

(Optional) Test name

testresult

(Optional) Test Results

passed_ports

(Optional) List passed ports

failed_ports

(Optional) List failed ports

incomplete_ports

(Optional) List of Imcompletly tested ports

untested_ports

(Optional) List of untested ports

aborted_ports

(Optional) List of aborted ports

err_disabled_ports

(Optional) List error disabled ports

err_code

(Optional) Error code

total_run_count

(Optional) Total run count

last_execution_time

(Optional) Last execution time

first_failure_time

(Optional) First test failure time

last_failure_time

(Optional) Last test failure time

last_pass_time

(Optional) Last test pass time

total_fail_count

(Optional) Total fail count

consequtive_fail_count

(Optional) Consequetive failure count

last_fail_reason

(Optional) Last failure reason

next_execution_time

(Optional) Next test execution time

Command Mode

- /exec

show diagnostic result module all

show diagnostic result module all [ detail ] [ __readonly__ { TABLE_Module <module_id> <curr_diag_level> <module_name> [ <bootup_diag_level> ] { TABLE_Test <test_id> <testname> [ <testresult> ] [ { <passed_ports> <failed_ports> <incomplete_ports> <untested_ports> <aborted_ports> <err_disabled_ports> } ] [ { <err_code> <total_run_count> <last_execution_time> <first_failure_time> <last_failure_time> <last_pass_time> <total_fail_count> <consequtive_fail_count> <last_fail_reason> <next_execution_time> } ] } } ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

result

Show diagnostic test result

module

Module keyword

all

Select all test ID

detail

(Optional) Detailed result

__readonly__

(Optional)

TABLE_Module

(Optional) Table of modules

module_id

(Optional) Module ID

curr_diag_level

(Optional) Current diag level

module_name

(Optional) Module name

bootup_diag_level

(Optional) Diagnostic level at bootup

TABLE_Test

(Optional) Table of tests in module

test_id

(Optional) Test id of tests

testname

(Optional) Test name

testresult

(Optional) Test Results

passed_ports

(Optional) List passed ports

failed_ports

(Optional) List failed ports

incomplete_ports

(Optional) List of Imcompletly tested ports

untested_ports

(Optional) List of untested ports

aborted_ports

(Optional) List of aborted ports

err_disabled_ports

(Optional) List error disabled ports

err_code

(Optional) Error code

total_run_count

(Optional) Total run count

last_execution_time

(Optional) Last execution time

first_failure_time

(Optional) First test failure time

last_failure_time

(Optional) Last test failure time

last_pass_time

(Optional) Last test pass time

total_fail_count

(Optional) Total fail count

consequtive_fail_count

(Optional) Consequetive failure count

last_fail_reason

(Optional) Last failure reason

next_execution_time

(Optional) Next test execution time

Command Mode

- /exec

show diagnostic simulation module

show diagnostic simulation module <module> [ __readonly__ <module_id> <module_name> [ { TABLE_detail <serial_no> <testid> [ <portid> ] <mode> } ] ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

simulation

Simulating Diagnostic result

module

Module keyword

module

Module Number

__readonly__

(Optional)

module_id

(Optional) Module ID

module_name

(Optional) Module Name

TABLE_detail

(Optional) Table of simulation details

serial_no

(Optional) serial no

testid

(Optional) Test id

portid

(Optional) Port id

mode

(Optional) Simulation mode

Command Mode

- /exec

show diagnostic status module

show diagnostic status module <module> [ __readonly__ <test_runby_mapping> <module_id> <module_name> { TABLE_current <cur_test_name> <cur_run_by> } { TABLE_enqued <enq_test_name> <enq_run_by> } ]

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

status

Show test status(running/enqueued)

module

Module keyword

module

Module number

__readonly__

(Optional)

test_runby_mapping

(Optional) Test type expansion

module_id

(Optional) Module Id

module_name

(Optional) Module name

TABLE_current

(Optional) Table of currently running test

cur_test_name

(Optional) Currently running test

cur_run_by

(Optional) Test Run By

TABLE_enqued

(Optional) Table of enqueued tests

enq_test_name

(Optional) Enqueued test name

enq_run_by

(Optional) Test enqueued by

Command Mode

- /exec

show diff rollback-patch

show diff rollback-patch { src-checkpoint <chkpoint_name> | src-running-cfg | src-startup-cfg | src-file <srcfile_uri> } { dst-checkpoint <chkpoint_name> | dst-running-cfg | dst-startup-cfg | dst-file <dstfile_uri> } [ __readonly__ [ <patch_entry> ] + ]

Syntax Description

show

Show running system information

diff

Show diff between configuration files or checkpoints

rollback-patch

Show rollback patch between configuration files or checkpoints

src-checkpoint

Use checkpoint as source configuration

chkpoint_name

Checkpoint name

src-running-cfg

Use running configuration as source

src-startup-cfg

Use startup configuration as source

src-file

Src Checkpoint file

srcfile_uri

Src Checkpoint file path

dst-checkpoint

Use checkpoint as destination configuration

chkpoint_name

Checkpoint name

dst-running-cfg

Use running configuration as destination

dst-startup-cfg

Use startup configuration as destination

dst-file

Dst Checkpoint file

dstfile_uri

Src Checkpoint file path

__readonly__

(Optional) Read only

patch_entry

(Optional) rollback patch entry

Command Mode

- /exec

show dot1q-tunnel

show dot1q-tunnel [ __readonly__ TABLE_interface <interface> ]

Syntax Description

show

Show running system information

dot1q-tunnel

Show if port mode is dot1q-tunnel

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

Command Mode

- /exec

show dot1q-tunnel interface

show dot1q-tunnel interface <ifid_eth_dot1q_tunnel> [ __readonly__ TABLE_interface <interface> ]

Syntax Description

show

Show running system information

dot1q-tunnel

Show if port mode is dot1q-tunnel

interface

Show interface status and information

ifid_eth_dot1q_tunnel

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

Command Mode

- /exec

show dot1x

show dot1x [ __readonly__ <sys_auth_ctrl> <proto_ver> ]

Syntax Description

dot1x

dot1x configuration commands

__readonly__

(Optional)

sys_auth_ctrl

(Optional) show system auth control

proto_ver

(Optional) show protocol version

Command Mode

- /exec

show dot1x all

show dot1x all [ __readonly__ <sys_auth_ctrl> <proto_ver> TABLE_all <if_index> TABLE_allpae <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] ]

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

__readonly__

(Optional)

TABLE_all

(Optional)

TABLE_allpae

(Optional)

if_index

(Optional) Interface Index

sys_auth_ctrl

(Optional) Show System Auth Control

proto_ver

(Optional) Show Protocol Version

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

inactivity_period

(Optional) Show Inactivity Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

Command Mode

- /exec

show dot1x all details

show dot1x all details [ __readonly__ <sys_auth_ctrl> <proto_ver> TABLE_alldetail <if_index> TABLE_allpaedetail <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <no_of_clients> ] [ <port_status_no_clients> ] [ { TABLE_if_auth_clients [ <supp_mac_addr> ] [ <auth_domain> ] [ <auth_sm_state> ] [ <auth_bend_sm_state> ] [ <port_status> ] [ <authentication_method> ] [ <authenticated_by> ] [ <reauth_period_client> ] [ <reauth_action> ] [ <time_to_next_reauth> ] [ <auth_vlan> ] } ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] [ <no_of_supp_clients> ] [ <auth_mac_addr> ] [ <supp_sm_state> ] [ <supp_bend_sm_state> ] [ <supp_port_status> ] ]

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

details

802.1x details

__readonly__

(Optional)

TABLE_alldetail

(Optional)

TABLE_allpaedetail

(Optional)

TABLE_if_auth_clients

(Optional)

if_index

(Optional) Interface Index

sys_auth_ctrl

(Optional) Show System Auth Control

proto_ver

(Optional) Show Protocol Version

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

inactivity_period

(Optional) Show Inactivity Period

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

no_of_clients

(Optional) Show Supplicant Clients

port_status_no_clients

(Optional) Show Port Status if there are no clients

supp_mac_addr

(Optional) Show Supplicant MAC Address

auth_domain

(Optional) Show Supplicant Auth Domain

auth_sm_state

(Optional) Show Authenticator SM State

auth_bend_sm_state

(Optional) Show Authenticator Backend State

port_status

(Optional) Show Port Status

authentication_method

(Optional) show authentication method

authenticated_by

(Optional) show authenticated by

reauth_period_client

(Optional) Show Reauth Period

reauth_action

(Optional) Show Reauthentication Action

time_to_next_reauth

(Optional) Show Time to Next Reauth

auth_vlan

(Optional) Show Vlan

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

no_of_supp_clients

(Optional) Show Supplicant Clients

auth_mac_addr

(Optional) Show Authenticator MAC Address

supp_sm_state

(Optional) Show Supplicant SM State

supp_bend_sm_state

(Optional) Show Supplicant Backend SM State

supp_port_status

(Optional) Show Supplicant Port Status

Command Mode

- /exec

show dot1x all statistics

show dot1x all statistics [ __readonly__ TABLE_allstat <if_index> TABLE_allpaestat <pae_type> [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] [ <rxreq> ] [ <rxsuppinvalid> ] [ <rxsupplenerr> ] [ <rxsupptotal> ] [ <txstart> ] [ <txlogoff> ] [ <txresp> ] [ <txsupptotal> ] [ <rxsuppversion> ] [ <lastrxsrcmac> ] ]

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

statistics

802.1x statistics

__readonly__

(Optional)

TABLE_allstat

(Optional)

TABLE_allpaestat

(Optional)

if_index

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

rxreq

(Optional) Show Received EAP-Request

rxsuppinvalid

(Optional) Show received Invalid EAPOL Frame

rxsupplenerr

(Optional) Show received EAPOL Bad Length Frame

rxsupptotal

(Optional) Show Received Total EAPOL Frame

txstart

(Optional) Show transmitted EAPOL-Start

txlogoff

(Optional) Show transmitted EAPOL-Logoff

txresp

(Optional) Show transmitted EAP-Response

txsupptotal

(Optional) Show transmitted Total EAPOL Frame

rxsuppversion

(Optional) Show Received EAPOL Version

lastrxsrcmac

(Optional) Show Last Source MAC received

Command Mode

- /exec

show dot1x all summary

show dot1x all summary [ __readonly__ TABLE_allsummary <if_index> <pae_type> [ <port_status_no_clients> ] [ { TABLE_if_auth_clients [ <auth_mac_addr> ] [ <port_status> ] } ] ]

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

summary

802.1x summary

__readonly__

(Optional)

TABLE_allsummary

(Optional)

TABLE_if_auth_clients

(Optional)

if_index

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

auth_mac_addr

(Optional) Show Authenticator MAC Address

port_status_no_clients

(Optional) Show Port Status if there are no clients

port_status

(Optional) Show Port Status

Command Mode

- /exec

show dot1x interface

{ show dot1x interface <if> [ __readonly__ <if_index> <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] ] } | { show dot1x interface <if> details [ __readonly__ <if_index_detail> <pae_type_detail> [ <port_control_detail> ] [ <host_mode_detail> ] [ <quiet_period_detail> ] [ <inactivity_period_detail> ] [ <tx_period_detail> ] [ <max_req_detail> ] [ <reauth_detail> ] [ <rate_limit_period_detail> ] [ <supp_timeout_detail> ] [ <server_timeout_detail> ] [ <reauth_server_detail> ] [ <reauth_period_detail> ] [ <reauth_max_detail> ] [ <mac_auth_bypass_detail> ] [ <no_of_clients> ] [ <port_status_no_clients_detail> ] [ { TABLE_if_auth_clients_detail [ <supp_mac_addr_detail> ] [ <auth_domain> ] [ <auth_sm_state> ] [ <auth_bend_sm_state> ] [ <port_status> ] [ <authentication_method> ] [ <authenticated_by> ] [ <reauth_period_client> ] [ <reauth_action> ] [ <time_to_next_reauth> ] [ <auth_vlan> ] } ] [ <start_period_detail> ] [ <auth_period_detail> ] [ <held_period_detail> ] [ <max_start_detail> ] [ <no_of_supp_clients> ] [ <auth_mac_addr_detail> ] [ <supp_sm_state> ] [ <supp_bend_sm_state> ] [ <supp_port_status> ] ] } | { show dot1x interface <if> statistics [ __readonly__ <if_index_stat> <pae_type_stat> [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] [ <rxreq> ] [ <rxsuppinvalid> ] [ <rxsupplenerr> ] [ <rxsupptotal> ] [ <txstart> ] [ <txlogoff> ] [ <txresp> ] [ <txsupptotal> ] [ <rxsuppversion> ] [ <lastrxsrcmac> ] ] } | { show dot1x interface <if> summary [ __readonly__ <if_index_summary> <pae_type_summary> [ <port_status_no_clients_summary> ] [ { TABLE_if_auth_clients_summary [ <auth_mac_addr> ] [ <port_status_summary> ] } ] [ <supp_mac_addr> ] [ <supp_port_status_summary> ] ] }

Syntax Description

dot1x

dot1x configuration commands

if

details

802.1x details

statistics

802.1x statistics

summary

802.1x summary

TABLE_if_auth_clients_detail

(Optional)

TABLE_if_auth_clients_summary

(Optional)

__readonly__

(Optional)

if_index

(Optional) Interface Index

if_index_detail

(Optional) Interface Index

if_index_stat

(Optional) Interface Index

if_index_summary

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

inactivity_period

(Optional) Show Inactivity Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

pae_type_detail

(Optional) Show PAE Type

port_control_detail

(Optional) Show Port Control

host_mode_detail

(Optional) Show Host Mode

reauth_detail

(Optional) Show Reauth Enabled Status

quiet_period_detail

(Optional) Show Quiet Period

inactivity_period_detail

(Optional) Show Inactivity Period

server_timeout_detail

(Optional) Show Server Timeout

supp_timeout_detail

(Optional) Show Supp Timeout

reauth_period_detail

(Optional) Show Reauth Period

reauth_max_detail

(Optional) Show Reauth Max

max_req_detail

(Optional) Show Max Req

tx_period_detail

(Optional) Show Tx Period

rate_limit_period_detail

(Optional) Show Rate Limit Period

reauth_server_detail

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass_detail

(Optional) Show MAC Auth Bypass Enabled Status

no_of_clients

(Optional) Show Supplicant Clients

port_status_no_clients_detail

(Optional) Show Port Status if there are no clients

supp_mac_addr_detail

(Optional) Show Supplicant MAC Address

auth_domain

(Optional) Show Supplicant Auth Domain

auth_sm_state

(Optional) Show Authenticator SM State

auth_bend_sm_state

(Optional) Show Authenticator Backend State

port_status

(Optional) Show Port Status

authentication_method

(Optional) show authentication method

authenticated_by

(Optional) show authenticated by

reauth_period_client

(Optional) Show Reauth Period

reauth_action

(Optional) Show Reauthentication Action

time_to_next_reauth

(Optional) Show Time to Next Reauth

auth_vlan

(Optional) Show vlan

start_period_detail

(Optional) Show Supplicant Start Period

auth_period_detail

(Optional) Show Supplicant Auth Period

held_period_detail

(Optional) Show Supplicant Held Period

max_start_detail

(Optional) Show Supplicant Max Start

no_of_supp_clients

(Optional) Show Supplicant Clients

auth_mac_addr_detail

(Optional) Show Authenticator MAC Address

supp_sm_state

(Optional) Show Supplicant SM State

supp_bend_sm_state

(Optional) Show Supplicant Backend SM State

supp_port_status

(Optional) Show Supplicant Port Status

pae_type_stat

(Optional) Show PAE Type

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

rxreq

(Optional) Show Received EAP-Request

rxsuppinvalid

(Optional) Show received Invalid EAPOL Frame

rxsupplenerr

(Optional) Show received EAPOL Bad Length Frame

rxsupptotal

(Optional) Show Received Total EAPOL Frame

txstart

(Optional) Show transmitted EAPOL-Start

txlogoff

(Optional) Show transmitted EAPOL-Logoff

txresp

(Optional) Show transmitted EAP-Response

txsupptotal

(Optional) Show transmitted Total EAPOL Frame

rxsuppversion

(Optional) Show Received EAPOL Version

lastrxsrcmac

(Optional) Show Last Soouce MAC received

pae_type_summary

(Optional) Show PAE Type

port_status_no_clients_summary

(Optional) Show Port Status if there are no clients

port_status_summary

(Optional) Show Port Status

supp_port_status_summary

(Optional) Show Port Status

supp_mac_addr

(Optional) Show Supplicant Client MAC Address

auth_mac_addr

(Optional) Show Auth Client MAC Address

Command Mode

- /exec

show dot1x interface client statistics

show dot1x interface <if> client statistics [ __readonly__ <if_index_stat> <pae_type_stat> [ { TABLE_mac_address [ <macaddr> ] [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] } ] [ <spurious_rxstart> ] [ <spurious_rxlogoff> ] [ <spurious_rxresp> ] [ <spurious_rxrespid> ] [ <spurious_rxinvalid> ] [ <spurious_rxlenerr> ] [ <spurious_rxtotal> ] [ <spurious_txreq> ] [ <spurious_txreqid> ] [ <spurious_txtotal> ] [ <spurious_rxversion> ] [ <spurious_lastrxsourcemac> ] ]

Syntax Description

dot1x

dot1x configuration commands

if

client

802.1x client

statistics

802.1x statistics

__readonly__

(Optional)

TABLE_mac_address

(Optional)

if_index_stat

(Optional) Interface Index

pae_type_stat

(Optional) Show PAE Type

macaddr

(Optional) mac-address of the client

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

spurious_rxstart

(Optional) Show Received EAPOL-Start of spurious macs

spurious_rxlogoff

(Optional) Show Received EAPOL-Logoff of spurious macs

spurious_rxresp

(Optional) Show Received EAP-Response of spurious macs

spurious_rxrespid

(Optional) Show Received EAP-ResponseID of spurious macs

spurious_rxinvalid

(Optional) Show Received Invalid EAPOL Frame of spurious macs

spurious_rxlenerr

(Optional) Show Received EAPOL Bad Length Frame of spurious macs

spurious_rxtotal

(Optional) Show Received Total EAPOL Frame of spurious macs

spurious_txreq

(Optional) Show Transmitted EAP-Request of spurious macs

spurious_txreqid

(Optional) Show Transmitted EAP-RequestID of spurious macs

spurious_txtotal

(Optional) Show Transmitted Total EAPOL Frame of spurious macs

spurious_rxversion

(Optional) Show Received EAPOL Version of spurious macs

spurious_lastrxsourcemac

(Optional) Show Last Source MAC of spurious macs

Command Mode

- /exec

show dot1x interface client statistics address

show dot1x interface <if> client statistics address <mac-address> [ __readonly__ <if_index_stat> <pae_type_stat> [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] ]

Syntax Description

dot1x

dot1x configuration commands

if

client

802.1x client

statistics

802.1x statistics

address

802.1x client address

mac-address

mac address EE:EE:EE:EE:EE:EE

__readonly__

(Optional)

if_index_stat

(Optional) Interface Index

pae_type_stat

(Optional) Show PAE Type

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

Command Mode

- /exec

show dot1x supplicant

show dot1x supplicant

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

Command Mode

- /exec

show dot1x supplicant interface

{ show dot1x supplicant interface <if> } | { show dot1x supplicant interface <if> details } | { show dot1x supplicant interface <if> summary } | { show dot1x supplicant interface <if> statistics }

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

if

details

802.1x details

statistics

802.1x statistics

summary

802.1x summary

Command Mode

- /exec

Chapter 6. E Show Commands

- show ecp

- show elam report

- show email

- show encryption service stat

- show environment

- show eol status

- show errdisable detect

- show errdisable flap

- show evb

- show evb hosts

- show evb interface

- show evb vsi

- show event-history

- show event-history xbar

- show event manager environment

- show event manager event-types

- show event manager events action-log

- show event manager history events

- show event manager policy-state

- show event manager script system

- show event manager system-policy

show ecp

show ecp [ detail ] [ __readonly__ <ecp_rte> <ecp_retries> [ <ecp_mode> ] <ecp_cnt_rx_pkt> <ecp_cnt_tx_pkt> [ { TABLE_ecp_plugin <plugin_id> <plugin_desc> <plugin_status> } ] [ { TABLE_ecp_session <session_id> <session_interface> <session_svlan> [ <session_peer_mac> ] <session_rx_seq> <session_tx_seq> [ <session_cnt_rx_pkt> ] [ <session_cnt_rx_dup> ] [ <session_cnt_rx_drop> ] [ <session_cnt_tx_pkt> ] [ <session_cnt_tx_retry> ] [ <session_cnt_tx_err> ] } ] ]

Syntax Description

show

Show running system information

ecp

ECP (Edge Control Protocol)

detail

(Optional) Detailed information

__readonly__

(Optional)

ecp_rte

(Optional) Retransmission timer init exponent

ecp_retries

(Optional) Maximal number of retransmissions

ecp_mode

(Optional) ECP mode

ecp_cnt_rx_pkt

(Optional) No. received packet

ecp_cnt_tx_pkt

(Optional) No. trasmitted packet

TABLE_ecp_plugin

(Optional) ECP plugin table

plugin_id

(Optional) Plugin id

plugin_desc

(Optional) Plugin description

plugin_status

(Optional) Plugin status

TABLE_ecp_session

(Optional) ECP session table

session_id

(Optional) Session id

session_svlan

(Optional) S-Vlan

session_peer_mac

(Optional) Peer mac

session_interface

(Optional) Interface

session_rx_seq

(Optional) Receive sequence

session_tx_seq

(Optional) Transmit sequence

session_cnt_rx_pkt

(Optional) No. receive packet

session_cnt_rx_dup

(Optional) No. receive duplicate

session_cnt_rx_drop

(Optional) No. receive drop

session_cnt_tx_pkt

(Optional) No. transmit packet

session_cnt_tx_retry

(Optional) No. transmit retry

session_cnt_tx_err

(Optional) No. transmit error

Command Mode

- /exec

show elam report

show elam report [ l2 | l3 | l4 | aclqos | mcast ] [ detail | summary ]

Syntax Description

show

Show running system information

elam

elam

report

Show ELAM report

l2

(Optional) Layer 2 header report

l3

(Optional) Layer 3 header report

l4

(Optional) Layer 4 header report

aclqos

(Optional) Aclqos report

mcast

(Optional) Multicast report

detail

(Optional) Detailed report

summary

(Optional) Summary of the report

Command Mode

- /exec

show email

show email [ __readonly__ [ <ipv4> ] [ <ipv6> ] [ <host> ] [ <port> ] [ <reply> ] [ <from> ] [ <vrfname> ] ]

Syntax Description

show

Show running system information

email

Pipe email configuration

__readonly__

(Optional)

ipv4

(Optional)

host

(Optional)

port

(Optional)

reply

(Optional)

from

(Optional)

vrfname

(Optional)

Command Mode

- /exec

show encryption service stat

show encryption service stat [ __readonly__ [ <encryptionService> <MasterKeyEncryption> <Type6Encryption> ] ]

Syntax Description

show

Show running system information

encryption

Encryption service

service

Encryption service

stat

Encrytpin service status

__readonly__

(Optional)

encryptionService

(Optional) Encryption service status

MasterKeyEncryption

(Optional) Master key status

Type6Encryption

(Optional) Is type 6 encryption used?

Command Mode

- /exec

show environment

show environment [ fan [ detail1 ] | power [ detail ] [ ampere ] [ input ] | temperature [ module <module> | <s0> <santa-cruz-range> | psu ] ] [ __readonly__ [ { TABLE_clockinfo <clockname> <clkmodel> <clkhwver> <clkstatus> <act_standby> } ] [ { fandetails [ { TABLE_faninfo <fanname> <fanmodel> <fanhwver> <fandir> <fanstatus> } ] { TABLE_fan_zone_speed <zone> <zonespeed> } <fan_filter_status> [ { TABLE_fantray <fanname> <trayfannum> <fandir> <fanperc> <fanrpm> } ] [ { TABLE_psufan <fanname> <fan1rpm> <fan2rpm> } ] } ] [ { powersup <voltage_level> { TABLE_psinfo <psnum> <psmodel> [ <actual_out> ] [ <actual_input> ] [ <tot_capa> ] [ <input_type> ] [ <watts> ] [ <amps> ] [ <ps_status> ] [ <ps_status_3k> ] } [ { TABLE_mod_pow_info <modnum> <mod_model> [ <actual_draw> ] [ <allocated> ] [ <watts_requested> ] [ <amps_requested> ] [ <watts_alloced> ] [ <amps_alloced> ] [ <modstatus> ] [ <modstatus_3k> ] } ] [ { power_summary [ <ps_redun_mode> ] [ <ps_redun_mode_3k> ] [ <ps_oper_mode> ] [ <ps_redun_op_mode> ] <tot_pow_capacity> [ <tot_gridA_capacity> ] [ <tot_gridB_capacity> ] [ <cumulative_power> ] [ <tot_pow_out_actual_draw> ] [ <tot_pow_input_actual_draw> ] [ <tot_pow_alloc_budgeted> ] [ <reserve_sup> ] [ <pow_used_by_mods> ] <available_pow> } ] [ { powersup_detail <reserve_sup> <reserve_xbar> <reserve_fan> <reserve_supxbarfan> <pow_used_by_mods> } ] <all_inlets_connected> [ { TABLE_ps_detail_info <det_name> <det_total_cap> <det_volt> <det_pintot> [ <det_pina> ] <det_vin> <det_iin> <det_pout> <det_vout> <det_iout> [ <det_pinb> ] [ <det_iinb> ] [ <det_vinb> ] [ <det_cord> ] <det_sw_alarm> [ { TABLE_det_hw_alarm_regval <regnum> <regval> } ] [ { TABLE_det_hw_alarm_str <regnumstr> <bitnumstr> <alarm_str> } ] } ] [ { TABLE_psinputinfo_n3k <ps_slot> <ps_input_voltage> <ps_input_current> <ps_in_power> <ps_output_voltage> <ps_output_current> <ps_state> } ] } ] [ { fandetails_3k [ { TABLE_faninfo <fanname> <fanmodel> <fanhwver> <fandir> <fanstatus> } ] { TABLE_fan_zone_speed <zone> <speed> } <fan_filter_status> [ { TABLE_fantray <fanname> <fannum> <fandir> <fanperc> <fanrpm> } ] [ { TABLE_psufan <fanname> <fan1rpm> <fan2rpm> } ] } ] [ { TABLE_tempinfo <tempmod> <sensor> <majthres> <minthres> <curtemp> <alarmstatus> [ <temptype> ] } ] [ { TABLE_psutempinfo <psumod> <inlet_temp> <outlet_temp> <heatsink_temp> } ] ]

Syntax Description

show

Show running system information

environment

system environment information

fan

(Optional) Fan information

power

(Optional) Power capacity and power distribution information

detail

(Optional) Detail Fan-tray information when used with Fan. Detail Power capacity and power distribution information when used with Power

detail1

(Optional) Detail Fan-tray information when used with Fan

ampere

(Optional) Ampere Power capacity and power distribution information

input

(Optional) Power supply power input

temperature

(Optional) temperature sensor information

module

(Optional) enter a module number

module

(Optional) please enter the module number

s0

(Optional) xbar

santa-cruz-range

(Optional) please enter the xbar number

psu

(Optional) psu temperature

__readonly__

(Optional)

TABLE_clockinfo

(Optional) Environment Clock

clockname

(Optional) Clock Instance (A or B)

clkmodel

(Optional) Model number of clock

clkhwver

(Optional) Hardware version of the clock

clkstatus

(Optional) Present/Absent Status of the clock

act_standby

(Optional) Active/Standby Status of clock

fandetails

(Optional) Environment Fan

TABLE_faninfo

(Optional) Fan Info

fanname

(Optional) Fan Instance

fanmodel

(Optional) Model number of fan

fanhwver

(Optional) Hardware version of the fan

fandir

(Optional) Air-flow direction of the fan-tray

fanstatus

(Optional) Present/Absent Status of the fan

TABLE_fan_zone_speed

(Optional) Fan Zone Speeds

zone

(Optional) Zone Number

zonespeed

(Optional) Zone Speed

fan_filter_status

(Optional) Present/Absent Status of fan filter

TABLE_fantray

(Optional) Fan Tray Details table

fanname

(Optional) Fan Tray Instance

trayfannum

(Optional) Fan number in the tray

fandir

(Optional) Air-flow direction of the fan-tray

fanperc

(Optional) FAN Speed percentage

fanrpm

(Optional) FAN Speed RPM

TABLE_psufan

(Optional) PSU Fan Details table

fanname

(Optional) PSU Fan Instance

fan1rpm

(Optional) FAN1 Speed RPM

fan2rpm

(Optional) FAN2 Speed RPM

fandetails_3k

(Optional) Environment Fan

TABLE_faninfo

(Optional) Fan Info

fanname

(Optional) Fan Instance

fanmodel

(Optional) Model number of fan

fanhwver

(Optional) Hardware version of the fan

fandir

(Optional) Air-flow direction of the fan-tray

fanstatus

(Optional) Present/Absent Status of the fan

TABLE_fan_zone_speed

(Optional) Fan Zone Speeds

zone

(Optional) Zone Number

speed

(Optional) Zone Speed

fan_filter_status

(Optional) Present/Absent Status of fan filter

TABLE_fantray

(Optional) Fan Tray Details table

fanname

(Optional) Fan Tray Instance

fannum

(Optional) Fan number in the tray

fandir

(Optional) Air-flow direction of the fan-tray

fanperc

(Optional) FAN Speed percentage

fanrpm

(Optional) FAN Speed RPM

TABLE_psufan

(Optional) PSU Fan Details table

fanname

(Optional) PSU Fan Instance

fan1rpm

(Optional) FAN1 Speed RPM

fan2rpm

(Optional) FAN2 Speed RPM

powersup

(Optional) Environment Power

voltage_level

(Optional) Voltage Level

TABLE_psinfo

(Optional) Power Supply Info

psnum

(Optional) Power Supply Number

psmodel

(Optional) Power Supply Model

actual_out

(Optional) Actual Output

actual_input

(Optional) Actual Input

tot_capa

(Optional) Total Capacity

input_type

(Optional) Power Supply Input Type

watts

(Optional) Power in Watts

amps

(Optional) Power in Amps

ps_status

(Optional) Power Supply Status

ps_status_3k

(Optional) Power Supply Status

TABLE_mod_pow_info

(Optional) Module Power Info

modnum

(Optional) Module number

mod_model

(Optional) Model ProductID number

actual_draw

(Optional) Actual Draw

allocated

(Optional) Power allocated

watts_requested

(Optional) Power requested in Watts

amps_requested

(Optional) Power requested in Amps

watts_alloced

(Optional) Power allocated in Watts

amps_alloced

(Optional) Power allocated in Amps

modstatus

(Optional) Module Status

modstatus_3k

(Optional) Module status

power_summary

(Optional) Power Usage Summary

ps_redun_mode

(Optional) Mode: Redundant or Non-redundant

ps_redun_mode_3k

(Optional) Mode: Redundant or Non-redundant

ps_redun_op_mode

(Optional) Operational mode: Redundant or Non-redundant

ps_oper_mode

(Optional) Operational Mode

tot_pow_capacity

(Optional) Total Power Capacity

tot_gridA_capacity

(Optional) Total Grid-A Capacity

tot_gridB_capacity

(Optional) Total Grid-B Capacity

cumulative_power

(Optional) Total Power of all Inputs

tot_pow_out_actual_draw

(Optional) Total Power Output, Actuals

tot_pow_input_actual_draw

(Optional) Total Power Input, Actuals

tot_pow_alloc_budgeted

(Optional) Total Power Allocated/budgeted

reserve_sup

(Optional) Power reserved for Supervisors

pow_used_by_mods

(Optional) Power currently used by Modules

available_pow

(Optional) Remaining Power Available

powersup_detail

(Optional) PowerSupply Details

reserve_sup

(Optional) Power reserved for Supervisors

reserve_xbar

(Optional) Power reserved for Xbars

reserve_fan

(Optional) Power reserved for Fans

reserve_supxbarfan

(Optional) Total Power reserved for Sups,Xbars,Fans

pow_used_by_mods

(Optional) Power currently used by Modules

all_inlets_connected

(Optional) Are all inlet cords connected

TABLE_ps_detail_info

(Optional) Power supply detail information

det_name

(Optional) Power supply name

det_total_cap

(Optional) Power supply total capacity

det_volt

(Optional) Power supply voltage

det_pintot

(Optional) Power supply pin A total power

det_pina

(Optional) PS pin A

det_vin

(Optional) PS Vin

det_iin

(Optional) PS Iin

det_pout

(Optional) PS Power out

det_vout

(Optional) PS voltaget out

det_iout

(Optional) PS current in

det_pinb

(Optional) PS pin B

det_iinb

(Optional) PS Iin B

det_vinb

(Optional) PS Vin B

det_cord

(Optional) PS cord

det_sw_alarm

(Optional) PS software alarm

TABLE_det_hw_alarm_regval

(Optional) PS hardware alarm

regnum

(Optional) HW alarm register

regval

(Optional) Alarm reg value

TABLE_det_hw_alarm_str

(Optional) PS Hardware alarm string

regnumstr

(Optional) Alarm reg number

bitnumstr

(Optional) Alarm register bit

alarm_str

(Optional) Alarm cause

TABLE_psinputinfo_n3k

(Optional) Power Supply power input

ps_slot

(Optional) Power Supply Number

ps_input_voltage

(Optional) Power Supply input volatage

ps_input_current

(Optional) Power Supply input current

ps_in_power

(Optional) Power Supply input power

ps_output_voltage

(Optional) Power Supply output volatage

ps_output_current

(Optional) Power Supply output current

ps_state

(Optional) Power Supply status

TABLE_tempinfo

(Optional) Environment Temperature

tempmod

(Optional) Module

sensor

(Optional) Sensor name

majthres

(Optional) Major Threshold

minthres

(Optional) Minor Threshold

curtemp

(Optional) Current temperature

alarmstatus

(Optional) Alarm Status

temptype

(Optional) Control or Monitor temparature

TABLE_psutempinfo

(Optional) PSU temperature info table

psumod

(Optional) PSU Module

inlet_temp

(Optional) Inlet Temperature

outlet_temp

(Optional) Outlet Temperature

heatsink_temp

(Optional) Heatsink Temperature

Command Mode

- /exec

show eol status

show eol status

Syntax Description

show

Show running system information

eol

last

status

Command Mode

- /exec

show errdisable detect

show errdisable { detect | recovery } [ __readonly__ TABLE_errdisable <cause> <state> [ <time_interval> ] ]

Syntax Description

show

Show running system information

errdisable

Error disable

detect

Show errdisable detect

recovery

Show errdisable recovery

__readonly__

(Optional) Read Only

TABLE_errdisable

(Optional) show errdisable

cause

(Optional) errdisable cause

state

(Optional) Interface state

time_interval

(Optional) err revovery time interval

Command Mode

- /exec

show errdisable flap

show errdisable flap

Syntax Description

show

Show running system information

errdisable

Error disable

flap

linkstate flapping

Command Mode

- /exec

show evb

show evb [ __readonly__ <evb_role> <evb_vdp_mac> [ <evb_cisco_mac> ] [ <evb_user_mac> ] <evb_rwd> <evb_rka> <evb_cnt_recv_vdpdu> <evb_cnt_drop_vdpdu> <evb_cnt_recv_tlv> <evb_cnt_recv_mgr_tlv> <evb_cnt_recv_assoc_tlv> <evb_cnt_recv_cmd> ]

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

__readonly__

(Optional)

evb_role

(Optional) EVB role

evb_vdp_mac

(Optional) VDP Mac address

evb_cisco_mac

(Optional) Cisco Mac address

evb_user_mac

(Optional) User mac address

evb_rwd

(Optional) Resource wait init exponent

evb_rka

(Optional) Keep-alive init exponent

evb_cnt_recv_vdpdu

(Optional) No. received vdpdu

evb_cnt_drop_vdpdu

(Optional) No. dropped vdpdu

evb_cnt_recv_tlv

(Optional) No. received tlv

evb_cnt_recv_mgr_tlv

(Optional) No. received mgr tlv

evb_cnt_recv_assoc_tlv

(Optional) No. received assoc tlv

evb_cnt_recv_cmd

(Optional) No. received commands

Command Mode

- /exec

show evb hosts

show evb hosts [ { summary | detail | internal-info } ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> | name <host-name> ] + } ] [ __readonly__ <evb_cnt_host> <evb_cnt_assoc_vsi> [ { TABLE_evb_host <host_row_id> <host_name> [ <host_uuid> ] [ { TABLE_evb_vsi <vsi_row_id> <mgr_id> <vsi_id> [ <vsi_host_name> ] <interface> [ <vpc> ] [ <s_channel> ] [ <station_mac> ] [ <m_state> ] [ <e_state> ] [ <reason> ] [ <timer> ] [ <profile_id> ] [ { TABLE_evb_vsi_filter <filter_row_id> [ <filter_group> ] [ <filter_vid> ] [ <filter_bd> ] [ <filter_mac> ] [ <filter_ip> ] } ] } ] } ] ]

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

hosts

Host information

summary

(Optional) Display summary information

detail

(Optional) Display detailed information

internal-info

(Optional) Display detailed and internal information

mac

(Optional) Display hosts by MAC address

mac-addr

(Optional) MAC Address

interface

(Optional) Display hosts by interface

intf-name

(Optional) Interface name

vlan

(Optional) Display hosts by VLAN

vlan-id

(Optional) VLAN ID

vni

(Optional) Display hosts by Virtual Network Identifier

vni-id

(Optional) VNI

ip

(Optional) Display hosts by IP address

ipv6

(Optional) Display hosts by IPv6 address

ip-addr

(Optional) IP address

name

(Optional) Display hosts by host name

host-name

(Optional) Host name substring

__readonly__

(Optional)

evb_cnt_host

(Optional) No. host entries

evb_cnt_assoc_vsi

(Optional) No. associated VSI entires

TABLE_evb_host

(Optional) EVB host table

host_row_id

(Optional) Host row id

host_name

(Optional) Host name

host_uuid

(Optional) Host uuid

TABLE_evb_vsi

(Optional) EVB vsi table

vsi_row_id

(Optional) VSI row id

mgr_id

(Optional) Manager id

vsi_id

(Optional) VSI id

vsi_host_name

(Optional) Host name

interface

(Optional) Interface

vpc

(Optional) VPC

s_channel

(Optional) S-Channel

station_mac

(Optional) Station mac address

profile_id

(Optional) Profile id

m_state

(Optional) Machine state

e_state

(Optional) Entry state

reason

(Optional) State reaon

timer

(Optional) Countdown timer

TABLE_evb_vsi_filter

(Optional) EVB filter table

filter_row_id

(Optional) Filter row id

filter_group

(Optional) Group id

filter_vid

(Optional) Vlan id

filter_bd

(Optional) Bridge-domain id

filter_mac

(Optional) Mac address

filter_ip

(Optional) IP address

Command Mode

- /exec

show evb interface

show evb interface [ <intf-name> ]

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

interface

Display interface information

intf-name

(Optional) Interface name

Command Mode

- /exec

show evb vsi

show evb vsi [ { summary | detail | internal-info } ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> ] + } ] [ __readonly__ <evb_cnt_vsi> <evb_cnt_assoc_vsi> [ { TABLE_evb_vsi <vsi_row_id> <mgr_id> <vsi_id> [ <vsi_host_name> ] <interface> [ <vpc> ] [ <s_channel> ] [ <station_mac> ] [ <m_state> ] [ <e_state> ] [ <reason> ] [ <timer> ] [ <profile_id> ] [ { TABLE_evb_vsi_filter <filter_row_id> [ <filter_group> ] [ <filter_vid> ] [ <filter_bd> ] [ <filter_mac> ] [ <filter_ip> ] } ] } ] ]

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

vsi

Virtual Station Interface (VSI) information

summary

(Optional) Display summary information

detail

(Optional) Display detailed information

internal-info

(Optional) Display detailed and internal information

mac

(Optional) Display VSI by MAC address

mac-addr

(Optional) MAC Address

interface

(Optional) Display VSI by interface

intf-name

(Optional) Interface name

vlan

(Optional) Display VSI by VLAN

vlan-id

(Optional) VLAN ID

vni

(Optional) Display VSI by Virtual Network Identifier

vni-id

(Optional) VNI

ip

(Optional) Display VSI by IP address

ipv6

(Optional) Display VSI by IPv6 address

ip-addr

(Optional) IP address

__readonly__

(Optional)

evb_cnt_vsi

(Optional) No. VSI entries

evb_cnt_assoc_vsi

(Optional) No. associated VSI entires

TABLE_evb_vsi

(Optional) EVB vsi table

vsi_row_id

(Optional) VSI row id

mgr_id

(Optional) Manager id

vsi_id

(Optional) VSI id

vsi_host_name

(Optional) Host name

interface

(Optional) Interface

vpc

(Optional) VPC

s_channel

(Optional) S-Channel

station_mac

(Optional) Station mac address

profile_id

(Optional) Profile id

m_state

(Optional) Machine state

e_state

(Optional) Entry state

reason

(Optional) State reaon

timer

(Optional) Countdown timer

TABLE_evb_vsi_filter

(Optional) EVB filter table

filter_row_id

(Optional) Filter row id

filter_group

(Optional) Group id

filter_vid

(Optional) Vlan id

filter_bd

(Optional) Bridge-domain id

filter_mac

(Optional) Mac address

filter_ip

(Optional) IP address

Command Mode

- /exec

show event-history

show event-history

Syntax Description

show

Show running system information

event-history

show switch wide event history configuration

Command Mode

- /exec

show event-history xbar

show event-history xbar

Syntax Description

show

Show running system information

event-history

show switch wide event history configuration

xbar

Show all event-history debugging flags of xbar

Command Mode

- /exec

show event manager environment

show event manager environment { all | <varname> } [ __readonly__ <environment-details> ]

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

environment

Show information about environment variables

all

Show information about all the configured environment variables

varname

The environment variable name on which information is required

__readonly__

(Optional)

environment-details

(Optional) Show information about environment variables

Command Mode

- /exec

show event manager event-types

show event manager event-types [ all | <event-type-name> ] [ module <module-id> ] [ __readonly__ { <event-types> } ]

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

event-types

Show information about registered event types

all

(Optional) Show information about advanced event types as well

event-type-name

(Optional) Show information about the specified event type

module

(Optional) Show information about event types on other modules

module-id

(Optional) Module Id

__readonly__

(Optional)

event-types

(Optional) Show information about registered event types

Command Mode

- /exec

show event manager events action-log

show event manager events action-log [ policy <policy-name> | event-type <event-type-name> ] [ __readonly__ { <action-log-data> } ]

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

events

Show information about the history of past events

action-log

Show policy action logs

policy

(Optional) Name of policy

policy-name

(Optional) Enter policy name

event-type

(Optional) Name of event

event-type-name

(Optional) Enter event type

__readonly__

(Optional)

action-log-data

(Optional) Show information about the policy action logs

Command Mode

- /exec

show event manager history events

show event manager history events [ detail ] [ maximum <n-events> ] [ severity <sev> ] [ __readonly__ { <history-events> } ]

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

history

Show information about the history of past activity

events

Show information about the history of past events

detail

(Optional) Show information about the event parameters as well

maximum

(Optional) Specify an upper limit on the number of events to be shown

n-events

(Optional) Specify the maximum number of events to be shown

severity

(Optional) Show only those events whose severity is >= specified severity

sev

(Optional) Enter the severity threshold

__readonly__

(Optional)

history-events

(Optional) Show information about the history of past events

Command Mode

- /exec

show event manager policy-state

show event manager policy-state <name> [ module <module-id> ] [ __readonly__ { <policy-state> } ]

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

policy-state

Show information about the state of a policy

name

Name of the policy

module

(Optional) Get the information from a module

module-id

(Optional) Module Id

__readonly__

(Optional)

policy-state

(Optional) Show information about the state of a policy

Command Mode

- /exec

show event manager script system

show event manager script system { all | <script-name> } [ __readonly__ <script_system_details> ]

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

script

Show information about a script policy

system

Show information about a system script policy

all

Show all the available system script policies

script-name

Name of the system script policy

__readonly__

(Optional)

script_system_details

(Optional) Show Information about system script policies

Command Mode

- /exec

show event manager system-policy

show event manager system-policy [ all | <policy-name> ] [ __readonly__ { <sys-pol-details> } ]

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

system-policy

Show information about default system policies

all

(Optional) Show all policies (including advanced and non-overridable ones)

policy-name

(Optional) Show detailed information about the specified policy

__readonly__

(Optional)

sys-pol-details

(Optional) Show information about default system policies(including advanced and non-overridable ones

Command Mode

- /exec

Chapter 7. F Show Commands

- show fabric database dci

- show fabric database dci

- show fabric database host

- show fabric database host statistics

- show fabric database host summary

- show fabric database host temp

- show fabric database profile-map

- show fabric database static-host

- show fabric database statistics

- show fabric forwarding host-db

- show fabric forwarding ip local

- show fabric forwarding ipv6 local

- show fabric multicast

- show fabric multicast event-history

- show fabric multicast globals

- show fabric multicast ipv4 l2 vni

- show fabric multicast ipv4 rp

- show fabric multicast statistics

- show fabric multicast trigger-bgp-update vnid source group nlri-origin

- show fabric multicast trigger-isis-update nh-addr swid

- show fabric multicast trigger-m6rib-update vrf source group

- show fabric multicast vrf

- show fc2 bind

- show fc2 classf

- show fc2 exchange

- show fc2 exchresp

- show fc2 flogi

- show fc2 nport

- show fc2 plogi

- show fc2 plogi_pwwn

- show fc2 port brief

- show fc2 port drops

- show fc2 port state

- show fc2 socket

- show fc2 sockexch

- show fc2 socknotify

- show fc2 socknport

- show fc2 vsan

- show fcdroplatency

- show fcoe-npv issu-impact

- show fcoe

- show fcoe database

- show fctimer

- show fctimer D_S_TOV

- show fctimer E_D_TOV

- show fctimer F_S_TOV

- show fctimer R_A_TOV

- show fctimer distribution status

- show fctimer last action status

- show fctimer pending-diff

- show fctimer pending

- show fctimer session-status

- show fctimer session status

- show fctimer status

- show fctimer vsan

- show feature-set

- show feature-set services

- show feature

- show fhrp

- show fhrp verbose

- show file

- show fips status

- show flow cache

- show flow cache

- show flow exporter

- show flow glbl-pkt-cnt

- show flow interface

- show flow monitor

- show flow record

- show flow sw-monitor

- show flow timeout

- show flow tracer

- show forwarding

- show forwarding adjacency

- show forwarding bypass-hardware

- show forwarding capture

- show forwarding consistency l2

- show forwarding distribution capture

- show forwarding distribution clients

- show forwarding distribution fib-state

- show forwarding distribution ip igmp snooping

- show forwarding distribution ipv6 multicast route

- show forwarding distribution l2 multicast

- show forwarding distribution logging

- show forwarding distribution multicast

- show forwarding distribution multicast client-ack-db

- show forwarding distribution multicast client

- show forwarding distribution multicast download

- show forwarding distribution multicast mfib

- show forwarding distribution multicast outgoing-interface-list

- show forwarding distribution multicast resp-ack-timer-msgs

- show forwarding distribution multicast route

- show forwarding distribution nve overlay-vlan

- show forwarding distribution pauz

- show forwarding distribution peer-id

- show forwarding distribution test on

- show forwarding distribution trace

- show forwarding dvif primary

- show forwarding dvif secondary

- show forwarding ecmp

- show forwarding ecmp recursive

- show forwarding file-log disable

- show forwarding file-log enable

- show forwarding interfaces

- show forwarding ipv6 adjacency

- show forwarding ipv6 multicast route

- show forwarding ipv6 pss route

- show forwarding ipv6 route

- show forwarding kvfib cache on

- show forwarding l2 multicast

- show forwarding l2vpn ipv6 multicast route

- show forwarding l2vpn label vpls

- show forwarding l2vpn label xconnect

- show forwarding l2vpn multicast outgoing-interface-list

- show forwarding l2vpn multicast route

- show forwarding l2vpn service vpls

- show forwarding l2vpn service xconnect

- show forwarding l2vpn vlan

- show forwarding mpls

- show forwarding mpls aggregate

- show forwarding mpls cbts

- show forwarding mpls drop-stats

- show forwarding mpls ecmp

- show forwarding mpls option_b

- show forwarding mpls srte module

- show forwarding mpls summary

- show forwarding mpls te

- show forwarding multicast-sr loopback interface

- show forwarding multicast outgoing-interface-list

- show forwarding multicast route

- show forwarding nve l2 ingress-replication-peers

- show forwarding nve l3 adjacency tunnel

- show forwarding nve l3 ecmp

- show forwarding nve l3 peers

- show forwarding nve underlay-interfaces

- show forwarding pss route

- show forwarding restart

- show forwarding security group-tag

- show forwarding security mac

- show forwarding test on

- show forwarding trace

- show forwarding trace profile

- show forwarding trace profile funcstats

- show fte event

- show fte exporter

- show fte monitor

- show fte record

show fabric database dci

show fabric database dci [ { vrf <vrf-name> [ peer-id <peer-ip-address> ] [ detail ] } ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

dci

DCI Profile Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

detail

(Optional) Show detailed information

Command Mode

- /exec

show fabric database dci

show fabric database dci [ { vrf { <vrf-name> | <vrf-known-name> } [ peer-id <peer-ip-address> ] [ detail ] } ] [ __readonly__ [ TABLE_database_dci <vrf_name> <state> <flags> <profile> <instance> ] [ TABLE_database_dci_detail <packet_arrival_time> <sent_to_database_manager_at> <received_parameters_from_database_manager_at> <sent_apply_to_configuration_manager_at> <completed_executing_all_commands_at> <sent_un_apply_to_configuration_manager_at> <completed_unapplying_all_commands_at> ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

dci

DCI Profile Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

detail

(Optional) Show detailed information

__readonly__

(Optional) Read Only

TABLE_database_dci

(Optional) table show fabric database dci

vrf_name

(Optional)

state

(Optional)

flags

(Optional)

profile

(Optional)

instance

(Optional)

TABLE_database_dci_detail

(Optional) detail for table show fabric database dci

packet_arrival_time

(Optional) Profile request time

sent_to_database_manager_at

(Optional) Profile request sent to DCNM

received_parameters_from_database_manager_at

(Optional) Profile downloaded from DCNM

sent_apply_to_configuration_manager_at

(Optional) Profile sent to PPM to apply

completed_executing_all_commands_at

(Optional) Profile applied by PPM

sent_un_apply_to_configuration_manager_at

(Optional) Profile un-apply sent to PPM

completed_unapplying_all_commands_at

(Optional) Profile un-applied by PPM

Command Mode

- /exec

show fabric database host

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] [ __readonly__ [ TABLE_database_host [ <trigger_source> ] [ <client_type> ] [ <got_trigger_at> ] [ <number_of_client_hosts> ] [ <number_of_associated_interfaces> ] [ <profile_be_un_applied_in_seconds> ] [ <new_vdp_requests_be_accepted_in_seconds> ] [ <recovered_profile_be_checked_for_validity_in_seconds> ] [ <mac_aging_checked_in_seconds> ] [ <sent_to_database_manager_at> ] [ <received_parameters_from_database_manager_at> ] [ <displaying_parameters_for_profile> ] [ <displaying_parameters_for_instance> ] [ <no_parameters_for_the_profile> ] [ <displaying_re_written_parameters_for_vpc_role> ] [ TABLE_parameter [ <parameter_index> ] [ <parameter> ] ] [ TABLE_static_profile <profile> <instance> <no_parameters_for_the_profile> ] [ TABLE_migrated_profile <profile> <instance_index> <previous_profile> <previous_instance_index> ] [ TABLE_rollback_profile <profile> <instance_index> ] [ <got_vlan_allocated_from_vlan_manager_at> ] [ <sent_apply_to_configuration_manager_at> ] [ <completed_executing_all_commands_at> ] [ <sent_to_vpc_peer_at> ] [ <completed_executing_all_commands_on_vpc_peer_at> ] [ <sent_un_apply_to_configuration_manager_at> ] [ <completed_unapplying_all_commands_at> ] ] [ TABLE_database_host_vni { [ <vni_id> ] [ <vlan_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] [ <client> ] [ <host> ] } ] } ] [ TABLE_database_host_vlan { [ <vlan_id> ] [ <vni_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] } ] } ] [ TABLE_extranet_vrf_entries { <vrf> <l3_vni> <state> <profile> <instance> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Host to profile mapping

detail

(Optional) Show hosts and interfaces

vni

(Optional) Virtual Network Identifier

vni-id

(Optional)

dot1q

(Optional) Dot1Q Encapsulation

vlan-id

(Optional)

__readonly__

(Optional) Read Only

TABLE_database_host

(Optional) table show fabric database host {dot1q | vni}

trigger_source

(Optional) TODO

client_type

(Optional) TODO

got_trigger_at

(Optional) TODO

number_of_client_hosts

(Optional) TODO

number_of_associated_interfaces

(Optional) TODO

profile_be_un_applied_in_seconds

(Optional) TODO

new_vdp_requests_be_accepted_in_seconds

(Optional) TODO

recovered_profile_be_checked_for_validity_in_seconds

(Optional) TODO

mac_aging_checked_in_seconds

(Optional) TODO

sent_to_database_manager_at

(Optional) TODO

received_parameters_from_database_manager_at

(Optional) TODO

displaying_parameters_for_profile

(Optional) TODO

displaying_parameters_for_instance

(Optional) TODO

no_parameters_for_the_profile

(Optional) TODO

displaying_re_written_parameters_for_vpc_role

(Optional) TODO

TABLE_parameter

(Optional) table show the parameters

parameter_index

(Optional) TODO

parameter

(Optional) TODO

TABLE_static_profile

(Optional) show static profile

profile

(Optional) TODO

instance

(Optional) TODO

no_parameters_for_the_profile

(Optional) TODO

TABLE_migrated_profile

(Optional) show migrated profile

profile

(Optional) TODO

instance_index

(Optional) TODO

previous_profile

(Optional) TODO

previous_instance_index

(Optional) TODO

TABLE_rollback_profile

(Optional) show rollback profile

profile

(Optional) TODO

instance_index

(Optional) TODO

got_vlan_allocated_from_vlan_manager_at

(Optional) TODO

sent_apply_to_configuration_manager_at

(Optional) TODO

completed_executing_all_commands_at

(Optional) TODO

sent_to_vpc_peer_at

(Optional) TODO

completed_executing_all_commands_on_vpc_peer_at

(Optional) TODO

sent_un_apply_to_configuration_manager_at

(Optional) TODO

completed_unapplying_all_commands_at

(Optional) TODO

TABLE_database_host_vni

(Optional) table show fabric database host vni based

vni_id

(Optional) TODO Add comment

vlan_id

(Optional) TODO Add comment

state

(Optional) TODO Add comment

flag

(Optional) TODO

profile_name

(Optional) TODO

instance_name

(Optional) TODO

packet_arrival_time

(Optional) TODO

request_profile_time

(Optional) TODO

got_profile_time

(Optional) TODO

sent_to_PPM_time

(Optional) TODO

profile_apply_time

(Optional) TODO

del_to_PPM_time

(Optional) TODO

TABLE_database_host_detail

(Optional) table show fabric database host detail

interface

(Optional) TODO

encap

(Optional) TODO

flags

(Optional) TODO

state

(Optional) TODO

vsi_id

(Optional) TODO

client

(Optional) TODO

host

(Optional) TODO

TABLE_database_host_vlan

(Optional) table show fabric database host vlan based

vlan_id

(Optional) TODO Add comment

vni_id

(Optional) TODO Add comment

state

(Optional) TODO Add comment

flag

(Optional) TODO

profile_name

(Optional) TODO

instance_name

(Optional) TODO

packet_arrival_time

(Optional) TODO

request_profile_time

(Optional) TODO

got_profile_time

(Optional) TODO

sent_to_PPM_time

(Optional) TODO

profile_apply_time

(Optional) TODO

del_to_PPM_time

(Optional) TODO

TABLE_database_host_detail

(Optional) table show fabric database host detail

interface

(Optional) TODO

encap

(Optional) TODO

flags

(Optional) TODO

state

(Optional) TODO

vsi_id

(Optional) TODO

TABLE_extranet_vrf_entries

(Optional) table extranet VRF entries

vrf

(Optional) TODO

l3_vni

(Optional) TODO

state

(Optional) TODO

profile

(Optional) TODO

instance

(Optional) TODO

Command Mode

- /exec

show fabric database host statistics

show fabric database host statistics [ __readonly__ [ TABLE_database_host_statistics { [ <data_snoop_triggers> ] [ <data_snoop_deletes> ] [ <data_snoop_responses> ] [ <vdp_association_requests> ] [ <vdp_deassociation_requests> ] [ <vdp_association_responses> ] [ <vdp_error_responses> ] [ <unsupported_interfaces> ] [ <no_profile_map_errors> ] [ <outstanding_delete_retry_add> ] [ <duplicate_add_existing_host> ] [ <hmm_api_error_cannot_add_host> ] [ <existing_profile_new_host> ] [ <profile_apply_from_vpc_peer> ] [ <profile_un_apply_from_vpc_peer> ] [ <host_apply_from_vpc_peer> ] [ <host_un_apply_from_vpc_peer> ] [ <early_delete_cancel_add> ] [ <dhcp_requests> ] [ <dhcp_responses> ] [ <dhcp_error_responses> ] [ <adbm_requests> ] [ <adbm_responses> ] [ <adbm_error_responses> ] [ <adbm_error_requests> ] [ <adbm_db_notifications> ] [ <vnseg_no_bridge_domain> ] [ <vnseg_encap_responses> ] [ <vnseg_vni_responses> ] [ <vnseg_unknown_responses> ] [ <vnseg_bd_down_notif> ] [ <bd_mgr_requests> ] [ <bd_mgr_success_responses> ] [ <bd_mgr_failure_responses> ] [ <bd_mgr_unreserve> ] [ <bd_mgr_inconsistencies> ] [ <no_mac_on_bd_notif> ] [ <refresh_failures> ] [ <profile_apply_received> ] [ <profile_vpc_queued> ] [ <profile_local_apply_queued> ] [ <profile_local_unapply_queued> ] [ <profile_apply_sent> ] [ <profile_apply_responses> ] [ <profile_apply_success> ] [ <profile_unapply_success> ] [ <profile_apply_failure> ] [ <profile_commands> ] [ <profile_error_incomplete_configs> ] [ <profile_api_error> ] [ <profile_unapply_sent> ] [ <profile_top_queue_adds> ] [ <profile_high_queue_adds> ] [ <profile_low_queue_adds> ] [ <profile_unapply_failure> ] [ <outstanding_vlan_requests> ] [ <outstanding_adbm_requests> ] [ <outstanding_profile_applies> ] [ <outstanding_vpc_profile_applies> ] [ <node_recon_pending> ] [ <node_recon_attempts> ] [ <node_recon_failures> ] } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

statistics

Statistics - Mostly shows non-zero values

__readonly__

(Optional) Read Only

TABLE_database_host_statistics

(Optional) table show fabric database host statistics

data_snoop_triggers

(Optional) TODO

data_snoop_deletes

(Optional) TODO

data_snoop_responses

(Optional) TODO

vdp_association_requests

(Optional) TODO

vdp_deassociation_requests

(Optional) TODO

vdp_association_responses

(Optional) TODO

vdp_error_responses

(Optional) TODO

unsupported_interfaces

(Optional) TODO

no_profile_map_errors

(Optional) TODO

outstanding_delete_retry_add

(Optional) TODO

duplicate_add_existing_host

(Optional) TODO

hmm_api_error_cannot_add_host

(Optional) TODO

existing_profile_new_host

(Optional) TODO

profile_apply_from_vpc_peer

(Optional) TODO

profile_un_apply_from_vpc_peer

(Optional) TODO

host_apply_from_vpc_peer

(Optional) TODO

host_un_apply_from_vpc_peer

(Optional) TODO

early_delete_cancel_add

(Optional) TODO

dhcp_requests

(Optional) TODO

dhcp_responses

(Optional) TODO

dhcp_error_responses

(Optional) TODO

adbm_requests

(Optional) TODO

adbm_responses

(Optional) TODO

adbm_error_responses

(Optional) TODO

adbm_error_requests

(Optional) TODO

adbm_db_notifications

(Optional) TODO

vnseg_no_bridge_domain

(Optional) TODO

vnseg_encap_responses

(Optional) TODO

vnseg_vni_responses

(Optional) TODO

vnseg_unknown_responses

(Optional) TODO

vnseg_bd_down_notif

(Optional) TODO

bd_mgr_requests

(Optional) TODO

bd_mgr_success_responses

(Optional) TODO

bd_mgr_failure_responses

(Optional) TODO

bd_mgr_unreserve

(Optional) TODO

bd_mgr_inconsistencies

(Optional) TODO

no_mac_on_bd_notif

(Optional) TODO

refresh_failures

(Optional) TODO

profile_apply_received

(Optional) TODO

profile_vpc_queued

(Optional) TODO

profile_local_apply_queued

(Optional) TODO

profile_local_unapply_queued

(Optional) TODO

profile_apply_sent

(Optional) TODO

profile_apply_responses

(Optional) TODO

profile_apply_success

(Optional) TODO

profile_unapply_success

(Optional) TODO

profile_apply_failure

(Optional) TODO

profile_commands

(Optional) TODO

profile_error_incomplete_configs

(Optional) TODO

profile_api_error

(Optional) TODO

profile_unapply_sent

(Optional) TODO

profile_top_queue_adds

(Optional) TODO

profile_high_queue_adds

(Optional) TODO

profile_low_queue_adds

(Optional) TODO

profile_unapply_failure

(Optional) TODO

outstanding_vlan_requests

(Optional) TODO

outstanding_adbm_requests

(Optional) TODO

outstanding_profile_applies

(Optional) TODO

outstanding_vpc_profile_applies

(Optional) TODO

node_recon_pending

(Optional) TODO

node_recon_attempts

(Optional) TODO

node_recon_failures

(Optional) TODO

Command Mode

- /exec

show fabric database host summary

show fabric database host summary [ __readonly__ [ TABLE_database_host_summary { <number_of_instances_applied> <number_of_client_hosts> <recovery_timeout_minute> <cleanup_timeout_minute> <client_add_suppression_timeout_minute> <mac_aging_timeout_minute> <autoid_support> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

summary

Summary

__readonly__

(Optional) Read Only

TABLE_database_host_summary

(Optional) table show fabric database host summary

number_of_instances_applied

(Optional) TODO

number_of_client_hosts

(Optional) TODO

recovery_timeout_minute

(Optional) TODO

cleanup_timeout_minute

(Optional) TODO

client_add_suppression_timeout_minute

(Optional) TODO

mac_aging_timeout_minute

(Optional) TODO

autoid_support

(Optional) List of supported auto-generate ids

Command Mode

- /exec

show fabric database host temp

show fabric database host temp [ interface <intf-id> ] [ dot1q <vlan-id> ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

temp

Temporary

interface

(Optional) Specified interface to display

intf-id

(Optional) Name of interface

dot1q

(Optional) Dot1Q Encapsulation

vlan-id

(Optional)

Command Mode

- /exec

show fabric database profile-map

show fabric database profile-map { global | [ <id> | interface <interface-id> ] } [ __readonly__ [ TABLE_database_profile_map { <map> <proto> <vni> <dot1q> <flags> <profile_name> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

profile-map

Profile Map

global

Global profile (apply to all interfaces)

id

(Optional) Profile Map ID

interface

(Optional) Specified interface to display

interface-id

(Optional) Name of interface

__readonly__

(Optional) Read Only

TABLE_database_profile_map

(Optional) table show fabric database profile-map

map

(Optional) TODO

proto

(Optional) TODO

vni

(Optional) TODO

dot1q

(Optional) TODO

flags

(Optional) TODO

profile_name

(Optional) TODO

Command Mode

- /exec

show fabric database static-host

show fabric database static-host [ __readonly__ [ TABLE_database_static_host { <host_key> <interface> <state> <retry_delay> <retry_attempts> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

static-host

Configured Static Hosts

__readonly__

(Optional) Read Only

TABLE_database_static_host

(Optional) table show fabric database static-host

host_key

(Optional) static-host key

interface

(Optional) interface name

state

(Optional) static-host state

retry_delay

(Optional) seconds until next retry

retry_attempts

(Optional) cumulative retry attempts

Command Mode

- /exec

show fabric database statistics

show fabric database statistics [ type { network | profile | cabling | partition | bl-dci | host } ] [ __readonly__ { TABLE_types <dbtype> <requests> <dispatched> <not_dispatched> <re_dispatched> } [ { TABLE_dbs <is_active> <type> <prot> <serverdb> [ <reqs> <ok> <nores> <err> <tmout> <pend> ] } ] { LastPollTime <poll_time> } { LastUpdateTime <update_time> } [ { TABLE_updates <update_type> <update_status> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Show Fabric Database

statistics

Show database statistics

type

(Optional) Enter database type

network

(Optional) Network Database

profile

(Optional) Port or Switch Profile Database

cabling

(Optional) Cable Management Database

partition

(Optional) Partition Database

bl-dci

(Optional) Border Leaf - DCI

host

(Optional) Host

__readonly__

(Optional)

TABLE_types

(Optional) totals by type

dbtype

(Optional) type of database

requests

(Optional) number of requests

dispatched

(Optional) number dispatched

not_dispatched

(Optional) number not dispatched

re_dispatched

(Optional) number re-dispatched

TABLE_dbs

(Optional) per-database stats

is_active

(Optional) active/inactive

type

(Optional) database type

prot

(Optional) database protocol

serverdb

(Optional) server database

reqs

(Optional) requests

ok

(Optional) OK

nores

(Optional) nores

err

(Optional) err

tmout

(Optional) tmout

pend

(Optional) pend

LastPollTime

(Optional) last poll time

poll_time

(Optional) poll time

LastUpdateTime

(Optional) last update time for db status change

update_time

(Optional) update time

TABLE_updates

(Optional) totals ty type

update_type

(Optional) db type

update_status

(Optional) db status

Command Mode

- /exec

show fabric forwarding host-db

show fabric forwarding host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ __readonly__ [ TABLE_forwarding_host_db_vrf { <vrf> <vrf_id> <vrf_state> <vrf_reason> <vni_id> <refcount> <conversational_learning> [ TABLE_limit_type <limit_type> <enable> <threshold> <action> ] [ TABLE_ipv4 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> <aggregate_subnet_prefix_state> ] ] [ TABLE_ipv6 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> <aggregate_subnet_prefix_state> ] ] } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

host-db

Host Database info

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional) Read Only

TABLE_forwarding_host_db_vrf

(Optional) table show fabric forwarding host-db vrf

vrf

(Optional) TODO

vrf_id

(Optional) TODO

vrf_state

(Optional) TODO

vrf_reason

(Optional) TODO

vni_id

(Optional) TODO

refcount

(Optional) TODO

conversational_learning

(Optional) TODO

TABLE_limit_type

(Optional) table for limit type

limit_type

(Optional) TODO

enable

(Optional) TODO

threshold

(Optional) TODO

action

(Optional) TODO

TABLE_ipv4

(Optional) Information for address family IPv4

address_family

(Optional) TODO

vrf

(Optional) TODO

table_id

(Optional) TODO

table_state

(Optional) TODO

refcount

(Optional) TODO

local_hosts

(Optional) TODO

remote_hosts

(Optional) TODO

aggregates

(Optional) TODO

TABLE_aggregate_list

(Optional) table for aggregate subnet prefix list

aggregate_subnet_prefix_list

(Optional) TODO

TABLE_ipv6

(Optional) Information for address family IPv6

address_family

(Optional) TODO

vrf

(Optional) TODO

table_id

(Optional) TODO

table_state

(Optional) TODO

refcount

(Optional) TODO

local_hosts

(Optional) TODO

remote_hosts

(Optional) TODO

aggregates

(Optional) TODO

TABLE_aggregate_list

(Optional) table for aggregate subnet prefix list

aggregate_subnet_prefix_list

(Optional) TODO

aggregate_subnet_prefix_state

(Optional) TODO

Command Mode

- /exec

show fabric forwarding ip local

show fabric forwarding ip { local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ip-prefix> ] } [ __readonly__ [ TABLE_forwarding_ip_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

ip

Display IP information

local-host-db

HMM Local Host Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip-prefix

(Optional) IP prefix in CIDR format

__readonly__

(Optional) Read Only

TABLE_forwarding_ip_local_host_db_vrf

(Optional) table show fabric forwarding ip local-host-db vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

mac_address

(Optional) TODO

svi

(Optional) TODO

flags_0x

(Optional) TODO

physical_interface

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

- /exec

show fabric forwarding ipv6 local

show fabric forwarding ipv6 { local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ipv6-prefix> ] } [ __readonly__ [ TABLE_forwarding_ipv6_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

ipv6

Display IPv6 information

local-host-db

HMM Local Host Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional) Read Only

TABLE_forwarding_ipv6_local_host_db_vrf

(Optional) table show fabric forwarding ipv6 local-host-db vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

mac_address

(Optional) TODO

svi

(Optional) TODO

flags_0x

(Optional) TODO

physical_interface

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

- /exec

show fabric multicast

show fabric multicast { ipv4 { mroute [ { <v4_group> [ <v4_source> ] } ] | ssm-range | rp-grange | sa-ad-route [ { <v4_group> [ <v4_source> ] } ] } | ipv6 { mroute [ { <v6_group> [ <v6_source> ] } ] | ssm-range | rp-grange | sa-ad-route [ { <v4_group> [ <v4_source> ] } ] } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context_name> <nlri_type> <vnid> [ TABLE_mroute <mroute> { TABLE_node <node_addr> <real_join> <sim_join> <rpf_nbr> } ] [ TABLE_rp <border_leaf_addr> { TABLE_rp_grange <rp_grange_desc> } ] [ TABLE_ssm <border_leaf_addr> { TABLE_ssm_range <ssm_range_desc> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

ipv4

Display IP information

ipv6

Display IPv6 information

mroute

display fabric mroutes

sa-ad-route

display Src Active AD routes

ssm-range

display SSM ranges

rp-grange

display RP granges

v4_group

(Optional) IPV4 Group address to display

v4_source

(Optional) IPV4 Source address to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs NGMVPN is aware of

__readonly__

(Optional)

TABLE_vrf

(Optional)

context_name

(Optional)

nlri_type

(Optional)

vnid

(Optional)

TABLE_mroute

(Optional)

mroute

(Optional)

TABLE_node

(Optional)

node_addr

(Optional)

real_join

(Optional)

sim_join

(Optional)

rpf_nbr

(Optional)

TABLE_rp

(Optional)

border_leaf_addr

(Optional)

TABLE_rp_grange

(Optional)

rp_grange_desc

(Optional)

TABLE_ssm

(Optional)

border_leaf_addr

(Optional)

TABLE_ssm_range

(Optional)

ssm_range_desc

(Optional)

Command Mode

- /exec

show fabric multicast event-history

show fabric multicast [ internal ] event-history { errors | msgs | <ngmvpn-event-hist-buf-name> | statistics }

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

internal

(Optional) Commands for internal use

event-history

Show various event logs of NGMVPN

errors

Show error logs of NGMVPN

msgs

Show various message logs of NGMVPN

ngmvpn-event-hist-buf-name

Show event hist buffer name

statistics

Show the state and size of the buffer

Command Mode

- /exec

show fabric multicast globals

show fabric multicast globals [ __readonly__ <pruning> <switch_role> <fabric_control_seg> <peer_fabric_ctrl_addr> <advertise_vpc_rpf_routes> <created_vni_list> <fwd_encap> ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

globals

show the global settings

__readonly__

(Optional)

pruning

(Optional)

switch_role

(Optional)

fabric_control_seg

(Optional)

peer_fabric_ctrl_addr

(Optional)

advertise_vpc_rpf_routes

(Optional)

created_vni_list

(Optional)

fwd_encap

(Optional)

Command Mode

- /exec

show fabric multicast ipv4 l2 vni

show fabric multicast { ipv4 | ipv6 } { l2-mroute } vni { <vni-id> | all } [ __readonly__ TABLE_vni <vnid> [ TABLE_mroute <mroute_desc> [ TABLE_fabric <fabric_node_addr> ] ] ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

ipv4

Display IP information

ipv6

Display IPv6 information

l2-mroute

display l2-mroute status

vni

Virtual Network Identifier

vni-id

VNI number

all

Display all L2 VNI NGMVPN is aware of

__readonly__

(Optional)

TABLE_vni

(Optional)

vnid

(Optional)

TABLE_mroute

(Optional)

mroute_desc

(Optional)

TABLE_fabric

(Optional)

fabric_node_addr

(Optional)

Command Mode

- /exec

show fabric multicast ipv4 rp

show fabric multicast { ipv4 | ipv6 } { rp-route } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

ipv4

Display IP information

ipv6

Display IPv6 information

rp-route

display fabric rp-routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs NGMVPN is aware of

Command Mode

- /exec

show fabric multicast statistics

show fabric multicast [ internal ] statistics

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

internal

(Optional) Commands for internal use

statistics

Show the state and size of the buffer

Command Mode

- /exec

show fabric multicast trigger-bgp-update vnid source group nlri-origin

show fabric multicast trigger-bgp-update vnid <vnid> source <source> group <group> nlri-origin <nlri-origin> [ delete ] [ starg ] [ sa-ad-route ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

trigger-bgp-update

simulate bgp update

vnid

Add/Del route with this vnid

vnid

vnid address

source

Add/Del route with this source

source

Source address

group

Add/Del route with this group

group

Group address

nlri-origin

Add/Del route with this nlri-origin

nlri-origin

Nlri Origin address

delete

(Optional) Whether this is a delete

starg

(Optional) Whether this is starg update

sa-ad-route

(Optional)

Command Mode

- /exec

show fabric multicast trigger-isis-update nh-addr swid

show fabric multicast trigger-isis-update nh-addr <nh-addr> swid <swid> [ delete ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

trigger-isis-update

simulate isis update

nh-addr

Add/Del mapping with this nh-addr

nh-addr

Nlri Origin address

swid

Add/Del mapping with this swid

swid

switch id

delete

(Optional) Whether this is a delete

Command Mode

- /exec

show fabric multicast trigger-m6rib-update vrf source group

show fabric multicast trigger-m6rib-update vrf { <vrf-name> | <vrf-known-name> } source <source> group <group> [ delete ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

trigger-m6rib-update

simulate m6rib update

vrf

Display per-VRF information

vrf-name

VRF name

vrf-known-name

Known VRF name

source

Add/Del route with this source

group

Add/Del route with this group

delete

(Optional) Whether this is a delete

Command Mode

- /exec

show fabric multicast vrf

show fabric multicast vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_vrf <context_name><context_id><vprime_iod><vnid> } ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

vrf

Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs NGMVPN is aware of

__readonly__

(Optional)

TABLE_vrf

(Optional)

Command Mode

- /exec

show fc2 bind

show fc2 bind [ __readonly__ { TABLE_fc2bind <SOCKET> <FLAGS> <NLEVEL> <RULE> <SINDEX> <VSAN> <D_ID> <MASK> <TYPE> <SUBTYPE> <M_VALUES> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

bind

show fc2 socket bindings

__readonly__

(Optional) Read only

TABLE_fc2bind

(Optional) show fc2 bind

SOCKET

(Optional) socket

FLAGS

(Optional) flags

NLEVEL

(Optional) nlevel

RULE

(Optional) rule

SINDEX

(Optional) sidnex

VSAN

(Optional) vsan

D_ID

(Optional) d_id

MASK

(Optional) mask

TYPE

(Optional) type

SUBTYPE

(Optional) subtype

M_VALUES

(Optional) m_values

Command Mode

- /exec

show fc2 classf

show fc2 classf [ __readonly__ { TABLE_fc2classf <HIX> <VSAN> <S_ID> <D_ID> <IFIDX> <R_A_TOV> <E_D_TOV> <F-SO> <RC> <RS> <CS> <EE> <2-SO> <RS> <3-SO> <RS> <EECNT> <TCCNT> <FCNT> <REFCNT> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

classf

show fc2 classf sessions

__readonly__

(Optional) Read only

TABLE_fc2classf

(Optional) show fc2 classf

HIX

(Optional) hix

VSAN

(Optional) vsan

S_ID

(Optional) sid

D_ID

(Optional) did

IFIDX

(Optional) ifidx

R_A_TOV

(Optional) r_a_tov

E_D_TOV

(Optional) e_d_tov

F-SO

(Optional) f-so

RC

(Optional) rc

RS

(Optional) rs

CS

(Optional) cs

EE

(Optional) ee

2-SO

(Optional) 2-so

RS

(Optional) rs

3-SO

(Optional) 3-so

RS

(Optional) rs

EECNT

(Optional) eecnt

TCCNT

(Optional) tccnt

FCNT

(Optional) fcnt

REFCNT

(Optional) refcnt

Command Mode

- /exec

show fc2 exchange

show fc2 exchange [ __readonly__ { TABLE_ExchngInfo [ <ECB_INUSE> ] [ <ECB_DROPPED> ] [ <ECB_TOTAL> ] [ <ECB_MAX> ] } [ TABLE_fc2exchange <HIX> <VSAN> <X_ID> <OX_ID> <RX_ID> <O_ID> <R_ID> <ESTAT> <STATE> <SOCKET> <DIFINDEX> <CS> <TYPE> <SEQID> <TCNT> <RCNT> <LO> <HI> <SSTAT> <LOGIN> ] ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

exchange

show fc2 active exchanges

__readonly__

(Optional) Read only

TABLE_ExchngInfo

(Optional) ecb info

ECB_INUSE

(Optional) ecb in use

ECB_DROPPED

(Optional) ecb dropped

ECB_TOTAL

(Optional) ecb total

ECB_MAX

(Optional) ecb threshold

TABLE_fc2exchange

(Optional) show fc2 exchange

HIX

(Optional) hix

VSAN

(Optional) vsan

X_ID

(Optional) xid

OX_ID

(Optional) oxid

RX_ID

(Optional) rxid

O_ID

(Optional) o_id

R_ID

(Optional) r_id

ESTAT

(Optional) estat

STATE

(Optional) state

SOCKET

(Optional) socket

DIFINDEX

(Optional) dIFINDEX

CS

(Optional) cs

TYPE

(Optional) type

SEQID

(Optional) seqid

TCNT

(Optional) tcnt

RCNT

(Optional) rcnt

LO

(Optional) lo

HI

(Optional) hi

SSTAT

(Optional) sstat

LOGIN

(Optional) login

Command Mode

- /exec

show fc2 exchresp

show fc2 exchresp [ __readonly__ { TABLE_fc2exchresp <HIX> <VSAN> <OX_ID> <S_ID> <CS> <SIFINDEX> <OX_ID2> <RX_ID2> <O_ID> <R_ID> <ESTAT> <STATE> <SOCKET> <TYPE> <SEQID> <TCNT> <RCNT> <LO> <HI> <SSTAT> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

exchresp

show fc2 active responder exchanges

__readonly__

(Optional) Read only

TABLE_fc2exchresp

(Optional) show fc2 exchresp

HIX

(Optional) hix

VSAN

(Optional) vsan

OX_ID

(Optional) oxid

S_ID

(Optional) sid

CS

(Optional) cs

SIFINDEX

(Optional) sifindex

OX_ID2

(Optional) oxid

RX_ID2

(Optional) rxid

O_ID

(Optional) oid

R_ID

(Optional) rid

ESTAT

(Optional) estat

STATE

(Optional) state

SOCKET

(Optional) socket

TYPE

(Optional) type

SEQID

(Optional) seqid

TCNT

(Optional) tcnt

RCNT

(Optional) rcnt

LO

(Optional) lo

HI

(Optional) hi

SSTAT

(Optional) sstat

Command Mode

- /exec

show fc2 flogi

show fc2 flogi [ __readonly__ { TABLE_fc2flogi <HIX> <VSAN> <S_ID> <FLOGI> <IFINDEX> <TYPE> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

flogi

show fc2 flogi table

__readonly__

(Optional) Read only

TABLE_fc2flogi

(Optional) show fc2 flogi

HIX

(Optional) hix

VSAN

(Optional) vsan

S_ID

(Optional) sid

FLOGI

(Optional) flogi

IFINDEX

(Optional) ifindex

TYPE

(Optional) type

Command Mode

- /exec

show fc2 nport

show fc2 nport [ __readonly__ { TABLE_fc2nport <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> <CF> <TC> <2-SO> <IC> <RC> <RS> <CS> <EE> <3-SO> <3-SO-IC> <3-SO-RC> <3-SO-RS> <3-SO-CS> <3-SO-EE> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

nport

show fc2 local nports

__readonly__

(Optional) Read only

TABLE_fc2nport

(Optional) show fc2 nport

REF

(Optional) ref

VSAN

(Optional) vsan

D_ID

(Optional) did

MASK

(Optional) mask

FL

(Optional) fl

ST

(Optional) st

IFINDEX

(Optional) ifindex

CF

(Optional) cf

TC

(Optional) tc

2-SO

(Optional) 2so

IC

(Optional) ic

RC

(Optional) rc

RS

(Optional) rs

CS

(Optional) cs

EE

(Optional) ee

3-SO

(Optional) 3so

3-SO-IC

(Optional) 3so-ic

3-SO-RC

(Optional) 3so-rc

3-SO-RS

(Optional) 3so-rs

3-SO-CS

(Optional) 3so-cs

3-SO-EE

(Optional) 3so-ee

Command Mode

- /exec

show fc2 plogi

show fc2 plogi [ __readonly__ { TABLE_fc2plogi <HIX> <ADDRESS> <VSAN> <S_ID> <D_ID> <IF_INDEX> <FL> <STATE> <CF> <TC> <2-SO> <IC> <RC> <RS> <CS> <EE> <3-SO> <3SO_IC> <3SO_RC> <3SO_RS> <3SO_CS> <3SO_EE> <EECNT> <TCCNT> <2CNT> <3CNT> <REFCNT> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

plogi

show fc2 plogi sessions

__readonly__

(Optional) Read only

TABLE_fc2plogi

(Optional) show fc2 plogi

HIX

(Optional) hix

ADDRESS

(Optional) address

VSAN

(Optional) vsan

S_ID

(Optional) sid

D_ID

(Optional) did

IF_INDEX

(Optional) ifindex

FL

(Optional) fl

STATE

(Optional) state

CF

(Optional) cf

TC

(Optional) tc

2-SO

(Optional) 2so

IC

(Optional) ic

RC

(Optional) rc

RS

(Optional) rs

CS

(Optional) cs

EE

(Optional) ee

3-SO

(Optional) 3so

3SO_IC

(Optional) ic

3SO_RC

(Optional) rc

3SO_RS

(Optional) rs

3SO_CS

(Optional) cs

3SO_EE

(Optional) ee

EECNT

(Optional) eecnt

TCCNT

(Optional) TCCNT

2CNT

(Optional) 2cnt

3CNT

(Optional) 3cnt

REFCNT

(Optional) refcnt

Command Mode

- /exec

show fc2 plogi_pwwn

show fc2 plogi_pwwn [ __readonly__ { TABLE_fc2plogi_pwwn <HIX> <ADDRESS> <VSAN> <S_ID> <D_ID> <IFINDEX> <FL> <STATE> <PWWN> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

plogi_pwwn

show fc2 plogi pwwn entries

__readonly__

(Optional) Read only

TABLE_fc2plogi_pwwn

(Optional) show fc2 plogi_pwwn

HIX

(Optional) hix

ADDRESS

(Optional) address

VSAN

(Optional) vsan

S_ID

(Optional) s_id

D_ID

(Optional) d_id

IFINDEX

(Optional) ifindex

FL

(Optional) fl

STATE

(Optional) state

PWWN

(Optional) pwwn

Command Mode

- /exec

show fc2 port brief

show fc2 port brief [ __readonly__ { TABLE_fc2portbrief <BAD_FRAME_RX> } [ TABLE_FCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_LBSTAT <IX> <ST> <MOD> <EMUL> <TXLBPKTS> <TXLBDROP> <RXLBPKTS> <RXLBDROP> ] [ TABLE_VFCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCPOSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCSLOTSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

brief

display only active port counters

__readonly__

(Optional) Read only

TABLE_fc2portbrief

(Optional) bad frames received

BAD_FRAME_RX

(Optional) fc2 bad frames rx

TABLE_FCSTAT

(Optional) FC Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_LBSTAT

(Optional) LB Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXLBPKTS

(Optional) tx lb packets

TXLBDROP

(Optional) tx lb drops

RXLBPKTS

(Optional) rx lb packets

RXLBDROP

(Optional) rx lb drop

TABLE_VFCSTAT

(Optional) VFC Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_VFCPOSTAT

(Optional) VFC po Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_VFCSLOTSTAT

(Optional) VFC slot Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

Command Mode

- /exec

show fc2 port drops

show fc2 port drops [ __readonly__ [ TABLE_FCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_LBSTAT <IX> <ST> <MOD> <EMUL> <TXLBPKTS> <TXLBDROP> <RXLBPKTS> <RXLBDROP> ] [ TABLE_VFCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCPOSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCSLOTSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

drops

display active port drop counters

__readonly__

(Optional) Read only

TABLE_FCSTAT

(Optional) FC Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_LBSTAT

(Optional) LB Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXLBPKTS

(Optional) tx lb packets

TXLBDROP

(Optional) tx lb drops

RXLBPKTS

(Optional) rx lb packets

RXLBDROP

(Optional) rx lb drop

TABLE_VFCSTAT

(Optional) VFC Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_VFCPOSTAT

(Optional) VFC po Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_VFCSLOTSTAT

(Optional) VFC slot Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

Command Mode

- /exec

show fc2 port state

show fc2 port state [ __readonly__ [ TABLE_FCPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPOPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPORTSLOTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

state

display port state history

__readonly__

(Optional) Read only

TABLE_FCPORTSTATE

(Optional) fc port state change history

PORT_STRING

(Optional) port name

PORT_NO

(Optional) port number

UP_DOWN_CNTR

(Optional) up-down counter

UP_STRING

(Optional) up

UP_TIME

(Optional) up time

UP_REFTIME

(Optional) up from

DOWN_STRING

(Optional) down string

DOWN_TIME

(Optional) down time

DOWN_REFTIME

(Optional) down from

TABLE_VFCPORTSTATE

(Optional) vfc port state change history

PORT_STRING

(Optional) port name

PORT_NO

(Optional) port number

UP_DOWN_CNTR

(Optional) up-down counter

UP_STRING

(Optional) up

UP_TIME

(Optional) up time

UP_REFTIME

(Optional) up from

DOWN_STRING

(Optional) down string

DOWN_TIME

(Optional) down time

DOWN_REFTIME

(Optional) down from

TABLE_VFCPOPORTSTATE

(Optional) vfc po port state change history

PORT_STRING

(Optional) port name

PORT_NO

(Optional) port number

UP_DOWN_CNTR

(Optional) up-down counter

UP_STRING

(Optional) up

UP_TIME

(Optional) up time

UP_REFTIME

(Optional) up from

DOWN_STRING

(Optional) down string

DOWN_TIME

(Optional) down time

DOWN_REFTIME

(Optional) down from

TABLE_VFCPORTSLOTSTATE

(Optional) vfc port slot state change history

PORT_STRING

(Optional) port name

PORT_NO

(Optional) port number

UP_DOWN_CNTR

(Optional) up-down counter

UP_STRING

(Optional) up

UP_TIME

(Optional) up time

UP_REFTIME

(Optional) up from

DOWN_STRING

(Optional) down string

DOWN_TIME

(Optional) down time

DOWN_REFTIME

(Optional) down from

Command Mode

- /exec

show fc2 socket

show fc2 socket [ __readonly__ { TABLE_fc2socket <SOCKET> <REFCNT> <PROTOCOL> <FLAGS> <PID> <RCVBUF> <RMEM_USED> <QLEN> <NOTSK> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socket

show fc2 active sockets

__readonly__

(Optional) Read only

TABLE_fc2socket

(Optional) show fc2 socket

SOCKET

(Optional) socket

REFCNT

(Optional) refcnt

PROTOCOL

(Optional) protocol

FLAGS

(Optional) flags

PID

(Optional) pid

RCVBUF

(Optional) rcvbuf

RMEM_USED

(Optional) rmem_used

QLEN

(Optional) qlen

NOTSK

(Optional) not_sk

Command Mode

- /exec

show fc2 sockexch

show fc2 sockexch [ __readonly__ { TABLE_fc2sockexch <SOCKET> <VSAN> <X_ID> <OX_ID> <RX_ID> <O_ID> <R_ID> <ESTAT> <STATE> <CS> <TYPE> <SK> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

sockexch

show fc2 active exchanges for each socket

__readonly__

(Optional) Read only

TABLE_fc2sockexch

(Optional) show fc2 sockexch

SOCKET

(Optional) socket

VSAN

(Optional) vsan

X_ID

(Optional) x_id

OX_ID

(Optional) oxid

RX_ID

(Optional) rxid

O_ID

(Optional) o_id

R_ID

(Optional) r_id

ESTAT

(Optional) estat

STATE

(Optional) state

CS

(Optional) cs

TYPE

(Optional) type

SK

(Optional) sk

Command Mode

- /exec

show fc2 socknotify

show fc2 socknotify [ __readonly__ { TABLE_fc2socknotify <SOCKET> <ADDRESS> <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socknotify

show fc2 local nport plogi/logo notifications per each socket

__readonly__

(Optional) Read only

TABLE_fc2socknotify

(Optional) show fc2 socknotify

SOCKET

(Optional) socket

ADDRESS

(Optional) address

REF

(Optional) ref

VSAN

(Optional) vsan

D_ID

(Optional) d_id

MASK

(Optional) mask

FL

(Optional) fl

ST

(Optional) st

IFINDEX

(Optional) ifindex

Command Mode

- /exec

show fc2 socknport

show fc2 socknport [ __readonly__ { TABLE_fc2socknport <SOCKET> <ADDRESS> <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socknport

show fc2 local nports per each socket

__readonly__

(Optional) Read only

TABLE_fc2socknport

(Optional) show fc2 socknport

SOCKET

(Optional) socket

ADDRESS

(Optional) address

REF

(Optional) ref

VSAN

(Optional) vsan

D_ID

(Optional) d_id

MASK

(Optional) mask

FL

(Optional) fl

ST

(Optional) st

IFINDEX

(Optional) ifindex

Command Mode

- /exec

show fc2 vsan

show fc2 vsan [ __readonly__ { TABLE_fc2vsan <VSAN> <X_ID> <E_D_TOV> <R_A_TOV> <WWN> <IOP_MODE> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

vsan

show fc2 vsan table

__readonly__

(Optional) Read only

TABLE_fc2vsan

(Optional) show fc2 vsan

VSAN

(Optional) vsan

X_ID

(Optional) xid

E_D_TOV

(Optional) e_d_tov

R_A_TOV

(Optional) r_a_tov

WWN

(Optional) wwn

IOP_MODE

(Optional) iop_mode

Command Mode

- /exec

show fcdroplatency

show fcdroplatency [ { network | switch } ] [ __readonly__ [ <switch_latency> ] [ <global_network_latency> ] [ TABLE_vsan_network_latency { <vsan-no> <network-latency> } ] ]

Syntax Description

show

Show running system information

fcdroplatency

show switch or network latency

network

(Optional) network latency in milliseconds

switch

(Optional) switch latency in milliseconds

__readonly__

(Optional)

switch_latency

(Optional) Switch latency value

global_network_latency

(Optional) global network latency value

TABLE_vsan_network_latency

(Optional) VSAN specific network latency settings

vsan-no

(Optional) vsan number

network-latency

(Optional) VSAN specific network latency

Command Mode

- /exec

show fcoe-npv issu-impact

show fcoe-npv issu-impact [ __readonly__ { <is_impact> } [ TABLE_interface <vfc_intf> <fc_id> ] ]

Syntax Description

show

Show running system informationrunning system information

fcoe-npv

feature fcoe-npv

issu-impact

Show feature fcoe-npv config issues if attempting to do non-disruptive ISSU

__readonly__

(Optional) Read Only

is_impact

(Optional) show issu impact

TABLE_interface

(Optional) show fcoe database

vfc_intf

(Optional) vfc port Interface index

fc_id

(Optional) vfc port FCID

Command Mode

- /exec

show fcoe

show fcoe [ __readonly__ { TABLE_fcf <fcf_if_index> <fcf_mac> <fc_map> <fcf_priority> <fka_Advertisement> } [ TABLE_vfc <vfc_name> <vfcf_mac> ] ]

Syntax Description

show

Show running system information

fcoe

Show FCOE paramaters

__readonly__

(Optional) Read Only

TABLE_fcf

(Optional) fcf table

fcf_if_index

(Optional) fcf if index

fcf_mac

(Optional) fcf mac

fc_map

(Optional) fc map

fcf_priority

(Optional) fcf priority

fka_Advertisement

(Optional) fka Advertisement

TABLE_vfc

(Optional) vfc details table for sup

vfc_name

(Optional) vfc name

vfcf_mac

(Optional) vfcf mac

Command Mode

- /exec

show fcoe database

show fcoe database [ __readonly__ { TABLE_interface <interface> [ <fcid> ] [ <port_name> ] <mac_address> } <flogi_count> [ TABLE_veport <interface> <mac_address> <vsan> ] ]

Syntax Description

show

Show running system information

fcoe

Show FCOE paramaters

database

Show FCOE database

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show fcoe database

fcid

(Optional) fcid

port_name

(Optional) port name

mac_address

(Optional) mac address

interface

(Optional) ve port Interface index

TABLE_veport

(Optional) ve port details

mac_address

(Optional) ve port mac address

flogi_count

(Optional) flogi_count

vsan

(Optional) ve port VSAN trunking

Command Mode

- /exec

show fctimer

show fctimer [ __readonly__ { <F_S_TOV> <D_S_TOV> <E_D_TOV> <R_A_TOV> } ]

Syntax Description

show

show running system information

fctimer

show Fibre Channel timers

__readonly__

(Optional) Read only

F_S_TOV

(Optional) F_S_TOV

D_S_TOV

(Optional) D_S_TOV

E_D_TOV

(Optional) E_D_TOV

R_A_TOV

(Optional) R_A_TOV

Command Mode

- /exec

show fctimer D_S_TOV

show fctimer D_S_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_D_S_TOV [ <vsan-no> ] <D_S_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

D_S_TOV

D_S_TOV in milliseconds

vsan

(Optional) Specify VSAN id

i0

(Optional) VSAN id range

__readonly__

(Optional)

TABLE_D_S_TOV

(Optional) table D_S_TOV

vsan-no

(Optional) vsan number

D_S_TOV

(Optional) D_S_TOV

non-exist-vsan

(Optional) non configured vsans

Command Mode

- /exec

show fctimer E_D_TOV

show fctimer E_D_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_E_D_TOV [ <vsan-no> ] <E_D_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

E_D_TOV

E_D_TOV in milliseconds

vsan

(Optional) Specify VSAN id

i0

(Optional) VSAN id range

__readonly__

(Optional)

TABLE_E_D_TOV

(Optional) table

vsan-no

(Optional) vsan number

E_D_TOV

(Optional) E_D_TOV

non-exist-vsan

(Optional) not exist vsans

Command Mode

- /exec

show fctimer F_S_TOV

show fctimer F_S_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_F_S_TOV [ <vsan-no> ] <F_S_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

F_S_TOV

F_S_TOV in milliseconds

vsan

(Optional) Specify VSAN id

i0

(Optional) VSAN id range

__readonly__

(Optional)

TABLE_F_S_TOV

(Optional) table

vsan-no

(Optional) vsan number

F_S_TOV

(Optional) F_S_TOV

non-exist-vsan

(Optional) not exist vsans

Command Mode

- /exec

show fctimer R_A_TOV

show fctimer R_A_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_R_A_TOV [ <vsan-no> ] <R_A_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

R_A_TOV

R_A_TOV in milliseconds

vsan

(Optional) Specify VSAN id

i0

(Optional) VSAN id range

__readonly__

(Optional)

TABLE_R_A_TOV

(Optional) table

vsan-no

(Optional) vsan number

R_A_TOV

(Optional) R_A_TOV

non-exist-vsan

(Optional) non exist vsans

Command Mode

- /exec

show fctimer distribution status

show fctimer distribution status

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

distribution

status of cfs distribution for fctimer

status

cfs distribution is enabled or disabled

Command Mode

- /exec

show fctimer last action status

show fctimer last action status [ __readonly__ [ <vsan> ] <last_action_timestamp> <last_action> <last_action_result> <last_action_failure_reason> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

last

Show the status of the last cfs commit/abort operation

action

Show the status of the last cfs commit/abort operation

status

Show the status of the last cfs commit/abort operation

__readonly__

(Optional) Readonly

vsan

(Optional) Vsan

last_action_timestamp

(Optional) Last action timestamp

last_action

(Optional) Last action

last_action_result

(Optional) Last action result

last_action_failure_reason

(Optional) Last action failure reason

Command Mode

- /exec

show fctimer pending-diff

show fctimer pending-diff [ __readonly__ <status_fctimer> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

pending-diff

Show the difference between pending database and running config

__readonly__

(Optional)

status_fctimer

(Optional) Show the difference between pending database and running config

Command Mode

- /exec

show fctimer pending

show fctimer pending [ __readonly__ <status_fctimer> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

pending

Show the status of pending fctimer commands

__readonly__

(Optional)

status_fctimer

(Optional) Show the status of pending fctimer commands

Command Mode

- /exec

show fctimer session-status

show fctimer session-status

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

session-status

Show the state of fctimer cfs session

Command Mode

- /exec

show fctimer session status

show fctimer session status [ __readonly__ [ <vsan> ] <last_action_timestamp> <last_action> <last_action_result> <last_action_failure_reason> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

session

Show the state of fctimer cfs session

status

Show the status of the last cfs commit/abort operation

__readonly__

(Optional) Readonly

vsan

(Optional) Vsan

last_action_timestamp

(Optional) Last action timestamp

last_action

(Optional) Last action

last_action_result

(Optional) Last action result

last_action_failure_reason

(Optional) Last action failure reason

Command Mode

- /exec

show fctimer status

show fctimer status [ __readonly__ <Distribution> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

status

cfs distribution is enabled or disabled

__readonly__

(Optional) read only

Distribution

(Optional) distribution

Command Mode

- /exec

show fctimer vsan

show fctimer vsan <i0> [ __readonly__ { TABLE_fctimer <vsan-no> <F_S_TOV> <D_S_TOV> <E_D_TOV> <R_A_TOV> } [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

vsan

Specify VSAN id

i0

VSAN id range

__readonly__

(Optional) Read only

TABLE_fctimer

(Optional) table

vsan-no

(Optional) vsan number

F_S_TOV

(Optional) F_S_TOV

D_S_TOV

(Optional) D_S_TOV

E_D_TOV

(Optional) E_D_TOV

R_A_TOV

(Optional) R_A_TOV

non-exist-vsan

(Optional) non exist vsans

Command Mode

- /exec

show feature-set

show feature-set [ <name> ] [ <id> ] [ __readonly__ TABLE_cfcFeatureSetTable <cfcFeatureSetIndex> <cfcFeatureSetName> <cfcFeatureSetAction> <cfcFeatureSetLastAction> <cfcFeatureSetLastActionResult> <cfcFeatureSetLastFailureReason> <cfcFeatureSetOpStatus> <cfcFeatureSetOpStatusReason> ]

Syntax Description

show

Show running system information

feature-set

Show feature set status

name

(Optional) feature-set name

id

(Optional) feature-set id

__readonly__

(Optional)

TABLE_cfcFeatureSetTable

(Optional) feature-set table

cfcFeatureSetIndex

(Optional) feature-set table index

cfcFeatureSetName

(Optional) feature-set name

cfcFeatureSetAction

(Optional) action

cfcFeatureSetLastAction

(Optional) last action

cfcFeatureSetLastActionResult

(Optional) last action result

cfcFeatureSetLastFailureReason

(Optional) last failure reason

cfcFeatureSetOpStatus

(Optional) operation status

cfcFeatureSetOpStatusReason

(Optional) operation status

Command Mode

- /exec

show feature-set services

show feature-set services <s0> [ __readonly__ [ { TABLE_services <service_name> } ] { <count> <feature_set> } ]

Syntax Description

show

Show running system information

feature-set

Show feature set status

services

Show services in feature set

__readonly__

(Optional)

TABLE_services

(Optional) all service names in feature set

service_name

(Optional) name of the service

count

(Optional) number of services in the feature set

feature_set

(Optional) feature set name

s0

Name of feature set

Command Mode

- /exec

show feature

show feature [ __readonly__ [ { TABLE_cfcFeatureCtrlTable <cfcFeatureCtrlIndex2> <cfcFeatureCtrlInstanceNum2> <cfcFeatureCtrlName2> <cfcFeatureCtrlAction2> <cfcFeatureCtrlLastAction2> <cfcFeatureCtrlLastActionResult2> <cfcFeatureCtrlLastFailureReason2> <cfcFeatureCtrlOpStatus2> <cfcFeatureCtrlOpStatusReason2> <cfcFeatureCtrlTag2> } ] ]

Syntax Description

show

Show running system information

feature

Show feature status

__readonly__

(Optional)

TABLE_cfcFeatureCtrlTable

(Optional) feature table

cfcFeatureCtrlIndex2

(Optional) feature table index

cfcFeatureCtrlInstanceNum2

(Optional) instance number

cfcFeatureCtrlName2

(Optional) feature name

cfcFeatureCtrlAction2

(Optional) Action to be triggered for the feature

cfcFeatureCtrlLastAction2

(Optional) Last action triggered for the feature

cfcFeatureCtrlLastActionResult2

(Optional) The result of execution of the last action

cfcFeatureCtrlLastFailureReason2

(Optional) Failure Reason

cfcFeatureCtrlOpStatus2

(Optional) operation status

cfcFeatureCtrlOpStatusReason2

(Optional) Reason for current operation status

cfcFeatureCtrlTag2

(Optional) Name of the instance in string format in case of multinstance feature

Command Mode

- /exec

show fhrp

show fhrp [ <intf> ] [ __readonly__ { TABLE_brief <intf_name> <intf_state> <ipv4_state> <ipv6_state> <hardware_status> <refcount> } ]

Syntax Description

fhrp

FHRP Show commands

show

Show running system information

intf

(Optional) Specify a single interface

__readonly__

(Optional)

TABLE_brief

(Optional) Show brief FHRP interface information

intf_name

(Optional) Interface name

intf_state

(Optional) Interface state

ipv4_state

(Optional) Interface IPv4 state

ipv6_state

(Optional) Interface IPv6 state

hardware_status

(Optional) Interface hardware status

refcount

(Optional) Interface refcount

Command Mode

- /exec

show fhrp verbose

show fhrp [ <intf> ] verbose [ __readonly__ { TABLE_det <intf_name> <handle> <refcount> { TABLE_clients <client_id> <client_name> } <running> <expired> <v_retries> <v_time> <r_delay> <min_delay> <remaining_delay> <i_state> <ipv4_state> <ipv6_state> <h_state> <int_l2> } ]

Syntax Description

fhrp

FHRP Show commands

show

Show running system information

intf

(Optional) Specify a single interface

verbose

Display detailed information

__readonly__

(Optional)

TABLE_det

(Optional) Detailed FHRP interface information

intf_name

(Optional) Interface name

handle

(Optional) Interface handle

refcount

(Optional) Reference count

TABLE_clients

(Optional) FHRP clients present on interface

client_id

(Optional) FHRP client id

client_name

(Optional) FHRP client name

running

(Optional) Time verify up timer running

expired

(Optional) Verify up timer has expired

v_retries

(Optional) Verify retries

v_time

(Optional) Verify remaining time

r_delay

(Optional) Reload delay

min_delay

(Optional) Min delay

remaining_delay

(Optional) Remaining delay

i_state

(Optional) Interface state

ipv4_state

(Optional) Interface IPv4 state

ipv6_state

(Optional) Interface IPv6 state

h_state

(Optional) Interface hardware state

int_l2

(Optional) Interface is L2-only

Command Mode

- /exec

show file

show file <uri0> [ cksum | md5sum | sha256sum | sha512sum ] [ __readonly__ { [ <file_content> ] + [ <file_content_cksum> ] [ <file_content_md5sum> ] [ <file_content_sha256sum> ] [ <file_content_sha512sum> ] } ]

Syntax Description

show

Show running system information

file

Displays content of files

uri0

Filename to be displayed

cksum

(Optional) Displays CRC checksum for a file

md5sum

(Optional) Displays MD5 checksum for a file

sha256sum

(Optional) Displays SHA256 checksum for a file

sha512sum

(Optional) Displays SHA512 checksum for a file

__readonly__

(Optional) Read only

file_content

(Optional) uri file content buffer string

file_content_cksum

(Optional) uri file content checksum

file_content_md5sum

(Optional) uri file content md5sum

file_content_sha256sum

(Optional) uri file content sha256sum

file_content_sha512sum

(Optional) uri file content sha512sum

Command Mode

- /exec

show fips status

show fips status [ __readonly__ { operation_status <o_status> } { mode_state <m_state> } [ TABLE_sessions <lc_num> <lc_status> ] ]

Syntax Description

show

Show running system information

fips

Show if FIPS mode is enabled or disabled

status

Whether FIPS mode is enabled or disabled

__readonly__

(Optional)

operation_status

(Optional) run-time information about fips

o_status

(Optional) operational status of fips

mode_state

(Optional) mode state

m_state

(Optional) fips or non-fips state

TABLE_sessions

(Optional) all lc status

lc_num

(Optional) the lc number

lc_status

(Optional) the lc status

Command Mode

- /exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ TABLE_flow_cache <flow-type> <source-ip> <destination-ip> <bridge-domain-id> <source-port> <destination-port> <protocol> <ipv6-flowlabel> <byte-count> <packet-count> <tcp-flags> <tos> <if-id> <flow-start> <flow-end> <source-mac> <destination-mac> <ether-type> ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

cache

Show NetFlow Exporter Cache

ipv4

(Optional) Show ipv4 cache entries

ipv6

(Optional) Show ipv6 cache entries

ce

(Optional) Show ce cache entries

__readonly__

(Optional)

TABLE_flow_cache

(Optional) The XML flow cache table

flow-type

(Optional) Flow type - v4,v6 or MAC

source-ip

(Optional) Source IP

destination-ip

(Optional) Destination IP

bridge-domain-id

(Optional) Bridge Domain ID

source-port

(Optional) Source Port

destination-port

(Optional) Destination Port

protocol

(Optional) Protocol

ipv6-flowlabel

(Optional) Ipv6 flowlabel

byte-count

(Optional) Byte Count

packet-count

(Optional) Packet Count

tcp-flags

(Optional) TCP Flags

tos

(Optional) TOS

if-id

(Optional) IF ID

flow-start

(Optional) Flow Start Time

flow-end

(Optional) Flow End Time

source-mac

(Optional) Source MAC

destination-mac

(Optional) Destination MAC

ether-type

(Optional) Ether Type

Command Mode

- /exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ [ { TABLE_flow_cache <flow-cache-index> [ <flow-type> ] [ <source-ip> ] [ <destination-ip> ] [ <source-mac> ] [ <destination-mac> ] [ <bridge-domain-id> ] [ <ether-type> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <ipv6-flowlabel> ] [ <byte-count> ] [ <packet-count> ] [ <tcp-flags> ] [ <tos> ] [ <if-id> ] [ <flow-start> ] [ <flow-end> ] } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

cache

Show NetFlow Exporter Cache

ipv4

(Optional) Show ipv4 cache entries

ipv6

(Optional) Show ipv6 cache entries

ce

(Optional) Show ce cache entries

__readonly__

(Optional)

TABLE_flow_cache

(Optional) The XML flow cache table

flow-cache-index

(Optional) Flow Index

flow-type

(Optional) Flow type - v4,v6 or MAC

source-ip

(Optional) Source IP

destination-ip

(Optional) Destination IP

source-mac

(Optional) Source MAC

destination-mac

(Optional) Destination MAC

bridge-domain-id

(Optional) Bridge Domain ID

ether-type

(Optional) Ether Type

source-port

(Optional) Source Port

destination-port

(Optional) Destination Port

protocol

(Optional) Protocol

ipv6-flowlabel

(Optional) Ipv6 flowlabel

byte-count

(Optional) Byte Count

packet-count

(Optional) Packet Count

tcp-flags

(Optional) TCP Flags

tos

(Optional) TOS

if-id

(Optional) IF ID

flow-start

(Optional) Flow Start Time

flow-end

(Optional) Flow End Time

Command Mode

- /exec

show flow exporter

show flow exporter [ name ] [ <exporter> ] [ __readonly__ { TABLE_flow_exporter <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> <exp_vers> <seqnum> <samp_table_to> <if_table_to> <stats_to> <temp_to> <rec_sent> <temp_sent> <pkts_sent> <bytes_sent> <dest_unreach> <buff_events> <pkts_drop_no_route> <pkts_drop_other> <pkts_drop_lc_rp> <pkts_drop_op_drops> <time_last_cleared> } ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

exporter

Show NetFlow Exporter Configuration and Statistics

name

(Optional) Show a specific Flow Exporter

exporter

(Optional) Specify an exporter

__readonly__

(Optional)

TABLE_flow_exporter

(Optional)

exporter

(Optional)

description

(Optional)

dest

(Optional)

vrf

(Optional)

vrf_id

(Optional)

vrf_resolved

(Optional)

dest_udp

(Optional)

source_intf

(Optional)

source_ip

(Optional)

dscp

(Optional)

seqnum

(Optional)

exp_vers

(Optional)

samp_table_to

(Optional)

if_table_to

(Optional)

stats_to

(Optional)

temp_to

(Optional)

rec_sent

(Optional)

temp_sent

(Optional)

pkts_sent

(Optional)

bytes_sent

(Optional)

dest_unreach

(Optional)

buff_events

(Optional)

pkts_drop_no_route

(Optional)

pkts_drop_other

(Optional)

pkts_drop_lc_rp

(Optional)

pkts_drop_op_drops

(Optional)

time_last_cleared

(Optional)

Command Mode

- /exec

show flow glbl-pkt-cnt

show flow glbl-pkt-cnt

Syntax Description

show

Show running system information

flow

Show NetFlow information

glbl-pkt-cnt

Show global packet count

Command Mode

- /exec

show flow interface

show flow { interface [ <intf> ] | vlan [ <vlan> ] } [ __readonly__ [ { TABLE_flow_interface [ <intf_name> ] [ <vlan_id> ] [ <v4in_mon_name> ] [ <v4in_direction> ] [ <v4in_profile_id> ] [ <v6in_mon_name> ] [ <v6in_direction> ] [ <v6in_profile_id> ] [ <l2in_mon_name> ] [ <l2in_direction> ] [ <l2in_profile_id> ] } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

interface

Flow interface information

intf

(Optional) Interface

vlan

Flow vlan information

vlan

(Optional) Vlan number

__readonly__

(Optional)

TABLE_flow_interface

(Optional) flow interface data

intf_name

(Optional) Interface

vlan_id

(Optional) VLAN ID

v4in_mon_name

(Optional) IPv4 Input monitor name

v4in_direction

(Optional) IPv4 Input direction

v4in_profile_id

(Optional) IPv4 Input profile id

v6in_mon_name

(Optional) IPv6 Input monitor name

v6in_direction

(Optional) IPv6 Input direction

v6in_profile_id

(Optional) IPv6 Input profile id

l2in_mon_name

(Optional) l2 Input monitor name

l2in_direction

(Optional) l2 Input direction

l2in_profile_id

(Optional) l2 Input profile id

Command Mode

- /exec

show flow monitor

show flow monitor [ name ] [ <monitor> [ cache [ detailed ] ] ] [ __readonly__ [ { TABLE_flow_monitor <monitor> <use_count> [ <description> ] <record> <exporter1> <exporter2> <bucket_id> <src_addr> <dest_addr> <direction> <pkt_count> <byte_count> } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

monitor

Show Monitor Configuration

name

(Optional) Show a specific Flow Monitor

monitor

(Optional) Specify a monitor

cache

(Optional) Flow monitor cache contents

detailed

(Optional) Show the entire cache contents

__readonly__

(Optional)

TABLE_flow_monitor

(Optional)

monitor

(Optional)

use_count

(Optional)

description

(Optional)

record

(Optional)

exporter1

(Optional)

exporter2

(Optional)

bucket_id

(Optional)

src_addr

(Optional)

dest_addr

(Optional)

direction

(Optional)

pkt_count

(Optional)

byte_count

(Optional)

Command Mode

- /exec

show flow record

show flow record [ name ] [ { <record> } | { netflow-original } | { netflow { protocol-port | layer2-switched { input } | { ipv4 | ipv6 | l2 } { original-input } } } ] [ __readonly__ [ { TABLE_flow_record <record> [ <description> ] <use_count> <template> [ <match_ip_src> ] [ <match_ip_dst> ] [ <match_proto> ] [ <match_tos> ] [ <match_l4_src> ] [ <match_l4_dst> ] [ <match_ingress> ] [ <match_egress> ] [ <match_src_as_peer> ] [ <match_dst_as_peer> ] [ <match_ipv6_src> ] [ <match_ipv6_dst> ] [ <match_ipv6_flow> ] [ <match_ipv6_option> ] [ <match_ipv6_traffic> ] [ <match_l2_src> ] [ <match_l2_dst> ] [ <match_l2_src_vlan> ] [ <match_l2_dst_vlan> ] [ <match_l2_1q> ] [ <match_l2_cos> ] [ <match_l2_etype> ] [ <match_flow_dir_match> ] [ <match_ipv4v6_src> ] [ <match_ipv4v6_dst> ] [ <collect_src_as> ] [ <collect_dst_as> ] [ <collect_src_as_peer> ] [ <collect_dst_as_peer> ] [ <collect_fwd_status> ] [ <collect_ipv4_next_hop> ] [ <collect_ipv4_bgp_next> ] [ <collect_ipv6_next_hop> ] [ <collect_ipv6_bgp_next> ] [ <collect_tcp_flags> ] [ <collect_flow_dir> ] [ <collect_bytes> ] [ <collect_bytes_long> ] [ <collect_packets> ] [ <collect_packets_long> ] [ <collect_time_first> ] [ <collect_time_last> ] [ <collect_ingress_coll> ] [ <collect_egress_coll> ] [ <collect_sampler_id> ] [ <collect_ip_ver> ] [ <collect_packet_disp> ] } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

record

Show Record Configuration

name

(Optional) Show the configuration for a specific Flow Record

record

(Optional) Specify a record

netflow-original

(Optional) Traditional IPv4 input NetFlow with origin ASs

netflow

(Optional) Traditional NetFlow collection schemes

ipv4

(Optional) IPv4 collection schemes

ipv6

(Optional) IPv6 collection schemes

l2

(Optional) L2 collection schemes

layer2-switched

(Optional) Layer2-Switched collection schemes

original-input

(Optional) Input NetFlow

input

(Optional) Input NetFlow

protocol-port

(Optional) Protocol and Ports aggregation scheme

__readonly__

(Optional)

TABLE_flow_record

(Optional) flow record data

record

(Optional)

description

(Optional)

use_count

(Optional)

template

(Optional)

match_ip_src

(Optional)

match_ip_dst

(Optional)

match_proto

(Optional)

match_tos

(Optional)

match_l4_src

(Optional)

match_l4_dst

(Optional)

match_ingress

(Optional)

match_egress

(Optional)

match_src_as_peer

(Optional)

match_dst_as_peer

(Optional)

match_ipv6_src

(Optional)

match_ipv6_dst

(Optional)

match_ipv6_flow

(Optional)

match_ipv6_option

(Optional)

match_ipv6_traffic

(Optional)

match_l2_src

(Optional)

match_l2_dst

(Optional)

match_l2_src_vlan

(Optional)

match_l2_dst_vlan

(Optional)

match_l2_1q

(Optional)

match_l2_cos

(Optional)

match_l2_etype

(Optional)

match_flow_dir_match

(Optional)

match_ipv4v6_src

(Optional)

match_ipv4v6_dst

(Optional)

collect_src_as

(Optional)

collect_dst_as

(Optional)

collect_src_as_peer

(Optional)

collect_dst_as_peer

(Optional)

collect_fwd_status

(Optional)

collect_ipv4_next_hop

(Optional)

collect_ipv4_bgp_next

(Optional)

collect_ipv6_next_hop

(Optional)

collect_ipv6_bgp_next

(Optional)

collect_tcp_flags

(Optional)

collect_flow_dir

(Optional)

collect_bytes

(Optional)

collect_bytes_long

(Optional)

collect_packets

(Optional)

collect_packets_long

(Optional)

collect_time_first

(Optional)

collect_time_last

(Optional)

collect_ingress_coll

(Optional)

collect_egress_coll

(Optional)

collect_sampler_id

(Optional)

collect_ip_ver

(Optional)

collect_packet_disp

(Optional)

Command Mode

- /exec

show flow sw-monitor

show flow sw-monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

sw-monitor

Show Monitor Configuration

name

(Optional) Show a specific Flow Monitor

monitorname

(Optional) Specify a monitor

cache

(Optional) Flow monitor cache contents

detailed

(Optional) Show the entire cache contents

Command Mode

- /exec

show flow timeout

show flow timeout [ __readonly__ [ <active_to> ] [ <inactive_to> ] [ <fast_to> ] [ <th_pkts> ] [ <agg_age_to> ] <flush_cache_to> ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

timeout

Show NetFlow flow cache timeout values

__readonly__

(Optional)

active_to

(Optional)

inactive_to

(Optional)

fast_to

(Optional)

th_pkts

(Optional)

agg_age_to

(Optional)

flush_cache_to

(Optional)

Command Mode

- /exec

show flow tracer

show flow tracer

Syntax Description

show

Show running system information

flow

Show NetFlow information

tracer

Show packet tracer information

Command Mode

- /exec

show forwarding

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ipv4 ] [ route | rnhdb ] [ recursive ] [ summary | detail | platform | partial | <prefix> [ longer-prefixes ] [ detail | platform ] | <address> [ detail | platform ] |

Syntax Description

show

forwarding

display fib information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table id in hex

ipv4

(Optional) ipv4

route

(Optional) display IP routing table

rnhdb

(Optional) rnh-db

recursive

(Optional) display routes with recursive next hops

partial

(Optional) display routes with partial ECMPs

summary

(Optional) display route counts

prefix

(Optional) display single exact match route

longer-prefixes

(Optional) display longer prefixes

address

(Optional) display single longest match route

detail

(Optional) show detailed information about the routes

platform

(Optional) one command to show pi and pd info together

Command Mode

- /exec

show forwarding adjacency

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ipv4 ] adjacency [ mpls ] [ lisp ] [ nve ] [ <aif> ] [ <anh> ] [ detail | stats | platform ] [ module <module> ] [ __readonly__ [ <adj-count> ] [ TABLE_adj { <fec> <nexthop> <rewinfo> <interface> <bgp_rnh> <bgp_orig_as> <bgp_peer_as> <pkts> <bytes> <exp> <src_addr> <dest_addr> <lisp_flags> <lisp_inst_id> <pltfm_key> <hh> <refcount> } ] [ TABLE_ip_adjacency { [ <nh> ] [ <rwinfo> ] [ <intf> ] [ <intf_idx> ] [ <hhandle> ] [ <refcnt> ] [ <flags> ] [ <holder> ] [ <pbr_cnt> ] [ <wccp_cnt> ] [ <rewrite-p> ] [ TABLE_index { [ <hw_adj> ] [ <cmn-idx> ] [ <lif> ] [ <buf-idx> ] } ] } ] ]

Syntax Description

show

forwarding

display fib information

ipv4

(Optional) ipv4

adjacency

display adjacency information

platform

(Optional) one command to show pi and pd info together

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

mpls

(Optional) mpls adjacency information

lisp

(Optional) LISP adjacency information

nve

(Optional) VxLAN tunnel adjacency information

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next hop

detail

(Optional) detail

stats

(Optional) adjacency statistics

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

adj-count

(Optional) total adj count

TABLE_adj

(Optional) Table Adjacency

fec

(Optional) FEC info

nexthop

(Optional) next hop address

rewinfo

(Optional) rewrite information

interface

(Optional) output interface

bgp_rnh

(Optional) next hop address

bgp_orig_as

(Optional) bgp orig as

bgp_peer_as

(Optional) bgp peer as

exp

(Optional) exp mapping

pkts

(Optional) packet stats

bytes

(Optional) bytes stats

src_addr

(Optional) src address

dest_addr

(Optional) dest address

lisp_flags

(Optional) lisp flags

lisp_inst_id

(Optional) lisp instance id

pltfm_key

(Optional) platform key

hh

(Optional) Hardware Handle

refcount

(Optional) reference count

TABLE_ip_adjacency

(Optional) Table ip adjacency

nh

(Optional) next hop address

rwinfo

(Optional) rewrite information

intf

(Optional) output interface

intf_idx

(Optional) Interface index

hhandle

(Optional) Hw Handle

refcnt

(Optional) reference count

flags

(Optional) Adjacency flags

holder

(Optional) Holder bitmap

pbr_cnt

(Optional) PBR count

wccp_cnt

(Optional) WCCP count

rewrite-p

(Optional) Rewrite pointer

TABLE_index

(Optional) HW index table

hw_adj

(Optional) v4 adj hw index

cmn-idx

(Optional) CMN Index

lif

(Optional) LIF

buf-idx

(Optional) Buffer index

Command Mode

- /exec

show forwarding bypass-hardware

show forwarding bypass-hardware [ module <module> ]

Syntax Description

show

forwarding

fib information

bypass-hardware

bypass hardware

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding capture

show forwarding capture [ module <module> ] [ __readonly__ <type><len><data> ]

Syntax Description

show

forwarding

display fib information

capture

display capture buffer

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

Command Mode

- /exec

show forwarding consistency l2

show { consistency-checker l2 module <modnum> | forwarding consistency l2 <modnum> } [ __readonly__ <status> [ <l2entry> ] [ <l2entry_ext> ] [ TABLE_mac_address <disp_mac_addr><disp_type><disp_vlan><disp_is_static><disp_age><disp_is_secure><disp_is_ntfy><disp_port> ] ]

Syntax Description

show

show

consistency-checker

Consistency Checker

forwarding

Forwarding information

consistency

consistency

l2

l2 consistency

module

Module number

modnum

Module Number

__readonly__

(Optional)

status

(Optional) Result of Consistency Checker

l2entry

(Optional) L2 entry

l2entry_ext

(Optional) L2 entry string

TABLE_mac_address

(Optional) Mac address table

Command Mode

- /exec

show forwarding distribution capture

show forwarding distribution capture [ __readonly__ <type><len><data> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

fib distribution info

capture

unicast capture buffer

__readonly__

(Optional)

Command Mode

- /exec

show forwarding distribution clients

show forwarding distribution clients [ __readonly__ <id><pid><name><shms><shme><shmn> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

fib distribution info

clients

unicast client information

__readonly__

(Optional)

Command Mode

- /exec

show forwarding distribution fib-state

show forwarding distribution fib-state [ __readonly__ <slot> <state><ttc><tprc><tv4ac><tv6ac> { TABLE_fib_state <tid><tafi><prc><pc><tname> } ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

fib distribution info

fib-state

unicast fib state info

__readonly__

(Optional)

slot

(Optional) slot number

TABLE_fib_state

(Optional) fib-state table

Command Mode

- /exec

show forwarding distribution ip igmp snooping

show forwarding distribution ip igmp snooping [ vlan <vlan-id> [ group [ <grpaddr> | <mac-grpaddr> ] [ source <srcaddr> ] ] ] [ detail ] [ __readonly__ <refcount> <oiflist_id> <last_oiflist_id> <ftag-id> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

ip

IPV4 information

igmp

MFDM IGMP information

snooping

L2 mcast snooping related information

vlan

(Optional) Info specific to a vlan

vlan-id

(Optional) Vlan id value

group

(Optional) Group specific information

grpaddr

(Optional) Group address

mac-grpaddr

(Optional) Group MAC address

source

(Optional) (G,S) specific information

srcaddr

(Optional) Source address

detail

(Optional) Detailed display

__readonly__

(Optional)

refcount

(Optional) Reference Count

oiflist_id

(Optional) OIF list Identifier

last_oiflist_id

(Optional) Last OIF list Identifier

ftag-id

(Optional) ftag Id

Command Mode

- /exec

show forwarding distribution ipv6 multicast route

show forwarding distribution ipv6 multicast route [ table <table_id> | vrf <vrf-name> ] [ [ group { <group> } ] [ source { <source> } ] | summary ] [ __readonly__ <table_type> <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <address> <flag> <route_pkts> <route_bytes> <mti_src_if> <mti_grp_ip> <mti_src_ip> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

display fib distribution information

ipv6

IPV6 related information

multicast

display IPv6 multicast information

route

display routing table

vrf

(Optional) display routes for a specific VRF

vrf-name

(Optional) VRF name

table

(Optional) table

table_id

(Optional) table number

group

(Optional) Multicast IPv6 Group Address

source

(Optional) Multicast IPv6 Source Address

summary

(Optional) display route counts

__readonly__

(Optional)

table_type

(Optional) Table Type

num_routes

(Optional) Number of routes

num_starg_routes

(Optional) Number of (*,G) routes

num_sg_routes

(Optional) Number of (S,G) routes

num_gprefix_routes

(Optional) Number of (*,G-prefix) routes

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

address

(Optional) Ipv6 address string

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

flag

(Optional) Route type flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

mti_src_if

(Optional) MTI Source Ifindex

mti_grp_ip

(Optional) MTI Group IP Address

mti_src_ip

(Optional) MTI Source IP Address

Command Mode

- /exec

show forwarding distribution l2 multicast

show forwarding distribution l2 multicast [ ip-based | mac-based ] [ vlan <vlan-id> [ { group <grpaddr> [ source <srcaddr> ] } | destination-mac <dmac> ] ] [ summary ] [ __readonly__ <refcount> <oiflist_id> <last_oiflist_id> <ftag-id> <src_str> <grp_str> <vlan> <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

l2

L2 information

multicast

L2 multicast information

ip-based

(Optional) IPv4 based

mac-based

(Optional) MAC based

vlan

(Optional) Info specific to a vlan

vlan-id

(Optional) Vlan id value

group

(Optional) Group specific information

grpaddr

(Optional) Group address

source

(Optional) (G,S) specific information

srcaddr

(Optional) Source address

destination-mac

(Optional) Destination MAC specific information

dmac

(Optional) Destination MAC address

summary

(Optional) display route counts

__readonly__

(Optional)

refcount

(Optional) Reference Count

oiflist_id

(Optional) OIF list Identifier

last_oiflist_id

(Optional) Last OIF list Identifier

ftag-id

(Optional) ftag Id

src_str

(Optional) Source

grp_str

(Optional) Group

vlan

(Optional) vlan_id

num_routes

(Optional) Number of routes

num_starg_routes

(Optional) Number of (*,G) routes

num_sg_routes

(Optional) Number of (S,G) routes

num_gprefix_routes

(Optional) Number of (*,G-prefix) routes

Command Mode

- /exec

show forwarding distribution logging

show forwarding distribution logging [ enable | disable ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

fib distribution information

logging

enable/disable file logging

enable

(Optional) start file logging

disable

(Optional) stop file logging

Command Mode

- /exec

show forwarding distribution multicast

show forwarding distribution multicast [ messages ] [ __readonly__ <fibstate> <slot> <accepting_routes> <num_accepting_routes> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

multicast

Multicast FIB distribution information

messages

(Optional) Outstanding Message Information

__readonly__

(Optional)

fibstate

(Optional) IP Multicast FIB process state

slot

(Optional) Slot

accepting_routes

(Optional) Indicates whether FIB is accepting routes

num_accepting_routes

(Optional) Number of fibs accepting routes

Command Mode

- /exec

show forwarding distribution multicast client-ack-db

show forwarding distribution multicast client-ack-db [ __readonly__ <xid> <num_recepients> <num_responses> ]

Syntax Description

show

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

multicast

Multicast

client-ack-db

Displays the client ack db

__readonly__

(Optional)

xid

(Optional) XID

num_recepients

(Optional) Number of recepients

num_responses

(Optional) Number of responses

Command Mode

- /exec

show forwarding distribution multicast client

show forwarding distribution multicast client [ __readonly__ <num-clients> <client-name> <client-id> <shmem-name> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

multicast

Multicast information

client

Show multicast distribution client information

__readonly__

(Optional)

num-clients

(Optional) Number of Clients registered

client-name

(Optional) Client Name

client-id

(Optional) Client-id

shmem-name

(Optional) Shared Memory Segment Name

Command Mode

- /exec

show forwarding distribution multicast download

show forwarding distribution multicast download

Syntax Description

show

forwarding

forwarding information

distribution

FIB distribution information

multicast

Multicast FIB distribution information

download

show download queues

Command Mode

- /exec

show forwarding distribution multicast mfib

show forwarding distribution multicast { mfib-txlist [ vrf <vrf-name> ] | mfib-buffers } [ __readonly__ <no-free-buffers> <no-used-buffers> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

multicast

Multicast information

mfib-txlist

Show MFIB transmission-list information

vrf

(Optional) Specify VRF

vrf-name

(Optional) Specify VRF name

mfib-buffers

Show MFIB route buffer information

__readonly__

(Optional)

no-free-buffers

(Optional) Number of Free txlist MFIB buffers

no-used-buffers

(Optional) Number of Used txlist MFIB buffers

Command Mode

- /exec

show forwarding distribution multicast outgoing-interface-list

show forwarding distribution multicast outgoing-interface-list { L2 | L3 | OTV } [ <index> ] [ __readonly__ <platform_index> <ref_count> <num_oif> <oif> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

multicast

Multicast FIB distribution information

outgoing-interface-list

Outgoing interface list

L2

Layer 2 oiflist

L3

Layer 3 oiflist

OTV

OTV oiflist

index

(Optional) Outgoing Interface List index

__readonly__

(Optional)

platform_index

(Optional) Platform index

ref_count

(Optional) Reference count

num_oif

(Optional) Number of outgoing interfaces

oif

(Optional) OIF name

Command Mode

- /exec

show forwarding distribution multicast resp-ack-timer-msgs

show forwarding distribution multicast resp-ack-timer-msgs

Syntax Description

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

multicast

Multicast information

resp-ack-timer-msgs

show response ack timers for MFDM

Command Mode

- /exec

show forwarding distribution multicast route

show forwarding distribution [ ip ] multicast route [ table <id> | vrf { <vrf_name> | all } ] [ [ group { <gaddr> [ <mask> ] | <gprefix> } ] [ source { <saddr> [ <smask> ] | <sprefix> } ] | summary ] [ __readonly__ <table_name> <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> <src_len> <grp_len> <df_ordinal> <rpfif> <rpf_ifname> <flag> <flag_value> <num_groups> <num_sources> <refcount> <oiflist_id> <oif_count> <oif_name> <oif_ifindex> <bytecnt> <pktcnt> <mti_src_if> <mti_grp_ip> <mti_src_ip> ]

Syntax Description

show

forwarding

Display Forwarding Information

distribution

FIB distribution information

ip

(Optional) IPV4 information

multicast

Multicast information

route

Multicast route related information

vrf

(Optional) Specify VRF

vrf_name

(Optional) Specify VRF name

all

(Optional) Display information for all VRFs

table

(Optional) Specify Multicast Routing Table

id

(Optional) Multicast Routing Table Identifier

group

(Optional) IPv4 Multicast Group specific

gaddr

(Optional) IPv4 Multicast Group Address

mask

(Optional) mask for group ip address

gprefix

(Optional) IPv4 Multicast Group Prefix

source

(Optional) IPv4 Multicast Source specific

saddr

(Optional) IPv4 Source Address

smask

(Optional) mask for group ip address

sprefix

(Optional) IPv4 Multicast Source Prefix

summary

(Optional) display route counts

__readonly__

(Optional)

table_name

(Optional) Table name

num_routes

(Optional) Number of routes

num_starg_routes

(Optional) Number of (*,G) routes

num_sg_routes

(Optional) Number of (S,G) routes

num_gprefix_routes

(Optional) Number of (*,G-prefix) routes

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

rpf_ifname

(Optional) RPF Interface ifName

flag

(Optional) Route type flag

flag_value

(Optional) hex value of route flag

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

refcount

(Optional) Reference Count

oiflist_id

(Optional) OIF list Identifier

oif_count

(Optional) Number of OIFs

oif_name

(Optional) OIF Name

oif_ifindex

(Optional) OIF ifIndex

bytecnt

(Optional) Current Byte counter

pktcnt

(Optional) Current Packet counter

mti_src_if

(Optional) MTI Source Ifindex

mti_grp_ip

(Optional) MTI Group IP Address

mti_src_ip

(Optional) MTI Source IP Address

Command Mode

- /exec

show forwarding distribution nve overlay-vlan

show forwarding distribution nve overlay-vlan [ __readonly__ <str> ]

Syntax Description

show

Show running system information

forwarding

forwarding information

distribution

fib distribution info

nve

nve distribution info

overlay-vlan

overlay-vlan adjacency info

__readonly__

(Optional)

str

(Optional)

Command Mode

- /exec

show forwarding distribution pauz

show forwarding distribution { pauz | rezum }

Syntax Description

show

forwarding

Display Forwarding Information

distribution

fib distribution information

pauz

start black-holing routes

rezum

stop black-holing routes

Command Mode

- /exec

show forwarding distribution peer-id

show forwarding distribution peer-id [ vpls | otv ] [ __readonly__ <header> TABLE_peer_id <app> <vlan> <id> <peer_id> ]

Syntax Description

show

Show running system information

forwarding

forwarding information

distribution

fib distribution info

peer-id

HW Peer-id allocation info

vpls

(Optional) VPLS

otv

(Optional) OTV

__readonly__

(Optional)

header

(Optional) Header

TABLE_peer_id

(Optional) Peer ID table

app

(Optional) OTV/VPLS

vlan

(Optional) VLAN

id

(Optional) ID

peer_id

(Optional) Peer-ID

Command Mode

- /exec

show forwarding distribution test on

show forwarding distribution test { on | off }

Syntax Description

show

forwarding

Display Forwarding Information

distribution

fib distribution information

test

show test variable

on

set variable

off

reset variable

Command Mode

- /exec

show forwarding distribution trace

show forwarding distribution trace

Syntax Description

show

forwarding

Display Forwarding Information

distribution

fib distribution info

trace

unicast trace information

Command Mode

- /exec

show forwarding dvif primary

show forwarding dvif primary

Syntax Description

show

show

forwarding

forwarding

dvif

simulate dvif region role change

primary

role has become primary

Command Mode

- /exec

show forwarding dvif secondary

show forwarding dvif secondary

Syntax Description

show

show

forwarding

forwarding

dvif

simulate dvif region role change

secondary

role has become secondary

Command Mode

- /exec

show forwarding ecmp

show forwarding ecmp [ { [ vrf { <vrf-name> | <vrf-known-name> } ] lisp } ] [ platform ] [ module <module> ] [ partial ] [ __readonly__ [ <header> <ecmp_hash> <intf> <nh> <v6nh> <hw_index> <num_mpls> <holder> <refcount> <num_paths> <sw_ptr> <ecmp_partial> ] [ TABLE_ecmp { [ <hash> ] [ <num_paths> ] [ <hwindex> ] [ <ecmppartial> ] [ TABLE_index { [ <ecmp_idx> ] [ <cmn_idx> ] } ] [ <refcnt> ] [ <ecmp_holder> ] } [ TABLE_adjacency { [ <intf> ] [ <nh> ] [ <v6nh> ] [ <hw_adj_idx> ] [ <hw_cmn_idx> ] [ <lif> ] [ <hw_nve_adj_idx> ] [ <hw_nve_cmn_idx> ] [ <nve_lif> ] } ] [ <vobj_count> ] [ <vxlan_vobj_count> ] [ <vxlan> ] [ <vobj_list_header> ] [ <vobj-id> ] ] ]

Syntax Description

show

forwarding

Display fib information

ecmp

Show information about ECMPs

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

lisp

(Optional) Show information about LISP ECMPs

platform

(Optional) one command to show pi and pd info together

module

(Optional) slot

module

(Optional) slot number

partial

(Optional) Show partially installed ECMPs

__readonly__

(Optional)

header

(Optional) o/p header

ecmp_hash

(Optional) ecmp hash

intf

(Optional) interface

nh

(Optional) next hop

v6nh

(Optional) V6 next hop

hw_index

(Optional) Hw index

num_mpls

(Optional) No of MPLS ecmp

holder

(Optional) holder bitmap

refcount

(Optional) refcount

sw_ptr

(Optional) Software pointer

num_paths

(Optional) No of paths

ecmp_partial

(Optional) partial ecmp

TABLE_ecmp

(Optional) ecmp table

hash

(Optional) ecmp hash

num_paths

(Optional) No of paths

hwindex

(Optional) Hw index

ecmppartial

(Optional) partial ecmp

TABLE_index

(Optional) index table

ecmp_idx

(Optional) hw ecmp index

cmn_idx

(Optional) cmn index

refcnt

(Optional) refcount

ecmp_holder

(Optional) holder bitmap

TABLE_adjacency

(Optional) adjacency table

intf

(Optional) interface

nh

(Optional) next hop

v6nh

(Optional) v6 next hop

hw_adj_idx

(Optional) hw adj index

hw_cmn_idx

(Optional) hw cmn index

lif

(Optional) lif

hw_nve_adj_idx

(Optional) nve adj index

hw_nve_cmn_idx

(Optional) nve cmn index

nve_lif

(Optional) nve lif

vobj_count

(Optional) vobj count

vxlan_vobj_count

(Optional) vxlan vobj count

vxlan

(Optional) vxlan

vobj_list_header

(Optional) vobj list header

vobj-id

(Optional) vobj id

Command Mode

- /exec

show forwarding ecmp recursive

show forwarding ecmp recursive [ platform ] [ max-display-count <display_count> ] [ module <module> ] [ partial ] [ __readonly__ [ TABLE_vobj { [ <header_vobj> ] [ <header_ecmp> ] } [ TABLE_vobj_idx { [ <hw_vobj_index> ] [ <cmn_index> ] } ] [ <num_pfxs> ] [ <ecmp_partial> ] [ <activepath_hdr> ] [ TABLE_activepath { [ <ap_nh> ] [ <ap_v6nh> ] [ <ap_rnh_len> ] [ <ap_nh_vpn_label> ] [ <ap_rnh_table_id> ] [ <ap_nh_weight> ] } ] [ <backuppath_hdr> ] [ TABLE_backuppath { [ <bp_nh> ] [ <bp_v6nh> ] [ <bp_nh_vpn_label> ] [ <bp_rnh_table_id> ] [ <bp_nh_weight> ] } ] [ <cnh_hdr> ] [ TABLE_cnh { [ <nh> ] [ <v6nh> ] [ <intf> ] [ TABLE_cnh_adj { [ <hw_adj> ] [ <hw_cmn_index> ] [ <lif> ] } ] } ] [ <hw_inst_n> ] [ <ls_count_n> ] [ <hw_inst_o> ] [ <ls_count_o> ] [ <fec_type> ] [ <header_fec_ecmp> ] [ <hw_vobj_fec_idx> ] [ <cmn_idx> ] [ <vobj_hw_inst_n> ] [ <vobj_ls_count_n> ] [ <vobj_hw_inst_o> ] [ <vobj_ls_count_o> ] [ <vobj_refcount> ] ] <header> <num_pfxs> <rnh_table_id> <nh> <rnh_len> <v6nh> <hw_instance> <nh_vpn_label> <nh_weight> <cnh_intf> <ecmp_partial> ]

Syntax Description

show

forwarding

Display fib information

ecmp

Show information about ECMPs

recursive

Show information about recursive ECMPs

platform

(Optional) one command to show pi and pd info together

module

(Optional) slot

partial

(Optional) Show partially installed ECMPs

module

(Optional) slot number

max-display-count

(Optional) displays max # of routes

display_count

(Optional) count

__readonly__

(Optional)

TABLE_vobj

(Optional) Table vobj

header_vobj

(Optional) vobj o/p header

header_ecmp

(Optional) ecmp o/p header

TABLE_vobj_idx

(Optional) Table vobj index

hw_vobj_index

(Optional) HW VOBJ Index

cmn_index

(Optional) cmn index

num_pfxs

(Optional) Number of prefixes using this virtual object

ecmp_partial

(Optional) partial ecmp

activepath_hdr

(Optional) o/p header

TABLE_activepath

(Optional) table active path

ap_nh

(Optional) Next hop info

ap_v6nh

(Optional) v6 Next hop info

ap_rnh_len

(Optional) Next hop mask length

ap_nh_vpn_label

(Optional) NH VPN label

ap_rnh_table_id

(Optional) The table id where the RNHs are present

ap_nh_weight

(Optional) weighted ecmp info

backuppath_hdr

(Optional) o/p header

TABLE_backuppath

(Optional) backup path table

bp_nh

(Optional) Next hop info

bp_v6nh

(Optional) v6 Next hop info

bp_nh_vpn_label

(Optional) NH VPN label

bp_rnh_table_id

(Optional) The table id where the RNHs are present

bp_nh_weight

(Optional) weighted ecmp info

cnh_hdr

(Optional) o/p header

TABLE_cnh

(Optional) cnh table

nh

(Optional) Next hop info

v6nh

(Optional) v6 Next hop info

intf

(Optional) cnh output interface

TABLE_cnh_adj

(Optional) Table cnh adjacency

hw_adj

(Optional) cnh hw adjacency

hw_cmn_index

(Optional) cnh hw cmn idx

lif

(Optional) lif

hw_inst_n

(Optional) Hardware instance info new

ls_count_n

(Optional) ls count new

hw_inst_o

(Optional) Hardware instance info old

ls_count_o

(Optional) ls count old

fec_type

(Optional) fec type

header_fec_ecmp

(Optional) o/p header

hw_vobj_fec_idx

(Optional) hw fec idx

cmn_idx

(Optional) cmn idx

vobj_hw_inst_n

(Optional) vobj hw instance

vobj_ls_count_n

(Optional) ls count new

vobj_hw_inst_o

(Optional) hw instnace info old

vobj_ls_count_o

(Optional) ls count old

vobj_refcount

(Optional) vobj refcount

header

(Optional) o/p header

num_pfxs

(Optional) Number of prefixes using this virtual object

rnh_table_id

(Optional) The table id where the RNHs are present

nh

(Optional) Next hop info

rnh_len

(Optional) Next hop mask length

v6nh

(Optional) V6 Next hop info

hw_instance

(Optional) Hardware instance info

nh_vpn_label

(Optional) NH VPN label

nh_weight

(Optional) weighted ecmp info

cnh_intf

(Optional) cnh output interface

ecmp_partial

(Optional) partial ecmp

Command Mode

- /exec

show forwarding file-log disable

show forwarding file-log disable

Syntax Description

show

show

forwarding

forwarding

file-log

logging to tmp file

disable

disable

Command Mode

- /exec

show forwarding file-log enable

show forwarding file-log enable

Syntax Description

show

show

forwarding

forwarding

file-log

logging to tmp file

enable

enable

Command Mode

- /exec

show forwarding interfaces

show forwarding interfaces [ module <module> ] [ __readonly__ <intf> <v4adjcnt> <v6adjcnt> <rpfmode> <mac> ]

Syntax Description

show

forwarding

fib information

interfaces

show fib interface info

__readonly__

(Optional)

intf

(Optional) interface name

module

(Optional) slot

module

(Optional) slot number

v4adjcnt

(Optional) count of v4 adjacencies

v6adjcnt

(Optional) count of v6 adjacencies

mac

(Optional) mac address

rpfmode

(Optional) uRPF mode

Command Mode

- /exec

show forwarding ipv6 adjacency

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 adjacency [ mpls ] [ <aif> ] [ <anh> ] [ detail | stats | platform ] [ module <module> ] [ __readonly__ [ <adj-count> ] [ TABLE_adj { <fec> <nexthop> <rewinfo> <interface> <pkts> <bytes> <bgp_rnh> <bgp_orig_as> <bgp_peer_as> <hh> <refcount> } ] [ TABLE_v6_adj { [ <nh> ] [ <rwinfo> ] [ <intf> ] [ <intf_idx> ] [ <hh> ] [ <refcnt> ] [ <flags> ] [ <holder> ] [ <pbr_cnt> ] [ <wccp_cnt> ] [ TABLE_index { [ <hw_adj> ] [ <cmn-idx> ] [ <lif> ] } ] } ] ]

Syntax Description

show

forwarding

display fib information

ipv6

ipv6

adjacency

display adjacency information

platform

(Optional) one command to show pi and pd info together

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

mpls

(Optional) mpls adjacency information

aif

(Optional) adjacency output interface

detail

(Optional) detail

stats

(Optional) adjacency statistics

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

adj-count

(Optional) total adj count

TABLE_adj

(Optional) Table Adjacency

fec

(Optional) FEC info

nexthop

(Optional) next hop address

rewinfo

(Optional) rewrite information

interface

(Optional) output interface

pkts

(Optional) packet stats

bytes

(Optional) bytes stats

bgp_rnh

(Optional) next hop address

bgp_orig_as

(Optional) bgp orig as

bgp_peer_as

(Optional) bgp peer as

hh

(Optional) Hardware Handle

refcount

(Optional) reference count

TABLE_v6_adj

(Optional) Table Adjacency

nh

(Optional) next hop address

rwinfo

(Optional) rewrite information

intf

(Optional) output interface

intf_idx

(Optional) Interface index

hh

(Optional) Hardware Handle

refcnt

(Optional) reference count

flags

(Optional) Adjacency flags

holder

(Optional) Holder bitmap

pbr_cnt

(Optional) PBR count

wccp_cnt

(Optional) WCCP count

TABLE_index

(Optional) HW index table

hw_adj

(Optional) v4 adj hw index

cmn-idx

(Optional) CMN Index

lif

(Optional) LIF

Command Mode

- /exec

show forwarding ipv6 multicast route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | all } | table <tab_id> ] ipv6 multicast route { [ group { <group> | <group_addr> } | source { <source> | <source_addr> } | module <module> | vrf { <vrf-name> | all } ] + | summary [ module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + } [ __readonly__ <table_type> <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> <num_prefix_insert_fail> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <address> <flag> <route_pkts> <route_bytes> ]

Syntax Description

show

forwarding

display fib information

ipv6

ipv6

multicast

IPV6 related Multicast information

route

Multicast route information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

tab_id

(Optional) table number

group

(Optional) Multicast IPv6 Group Address

source

(Optional) Multicast IPv6 Source Address

summary

display route counts

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

num_routes

(Optional) Number of routes

num_starg_routes

(Optional) Number of (*,G) routes

num_sg_routes

(Optional) Number of (S,G) routes

num_gprefix_routes

(Optional) Number of (*,G-prefix) routes

num_prefix_insert_fail

(Optional) Prefix insert fail count

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

address

(Optional) Ipv6 address string

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

flag

(Optional) Route type flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

Command Mode

- /exec

show forwarding ipv6 pss route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> } | table <table_id> ] ipv6 pss route [ module <module> ]

Syntax Description

show

show

forwarding

forwarding

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

table

(Optional) display info per vpn-id

table_id

(Optional) table number

ipv6

ipv6

pss

display info from pss

route

route

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding ipv6 route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] ipv6 { route | rnhdb } [ recursive ] [ detail | summary | platform | partial | <prefix> [ longer-prefixes ] [ detail | platform ] | <address> [ detail | platform ] | interface <interface> | next-hop <nh> | attached | unresolved | adjacency { <aif> <anh> | drop | glean | punt } ] [ max-display-count <display_count> ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ [ TABLE_vrf { [ <vrfname> ] [ <tblname> ] [ <tableid> ] [ <prefix_count> ] [ TABLE_prefix { [ <pfx> ] [ TABLE_path { [ <nexthop> | <special> ] [ <intf> ] [ <route_count> ] [ <path_count> ] [ <mask_length> ] [ <routes_per_mask> ] } ] [ <hw_handle> ] [ <flags> ] [ <holder> ] [ <nxt_obj_type> ] [ <hw_idx_v6adj> ] [ <cmn-idx> ] [ <lif> ] [ <buf-idx> ] } ] } ] ]

Syntax Description

show

forwarding

display fib information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table id in hex

ipv6

ipv6

route

display IP routing table

platform

(Optional) one command to show pi and pd info together

rnhdb

rnhdb

recursive

(Optional) display routes with recursive next hops

detail

(Optional) show detailed information about the routes

summary

(Optional) display route counts

partial

(Optional) display routes with partial ECMPs

longer-prefixes

(Optional) display longer prefixes

interface

(Optional) display routes with this output i/f only

interface

(Optional) output interface

next-hop

(Optional) display routes with this next-hop only

attached

(Optional) display directly connected routes

unresolved

(Optional) display unresolved routes

adjacency

(Optional) display routes via specified adjacency

aif

(Optional) adjacency output interface

drop

(Optional) display routes via drop adjacency

glean

(Optional) display routes via glean adjacency

punt

(Optional) display routes via punt adjacency

module

(Optional) slot

module

(Optional) slot number

max-display-count

(Optional) displays max # of routes

display_count

(Optional) count

__readonly__

(Optional)

TABLE_vrf

(Optional) vrf table

vrfname

(Optional) VRF name

tblname

(Optional) table name

tableid

(Optional) table id

prefix_count

(Optional) total number of prefix in VRF

TABLE_prefix

(Optional) all xml prefix entries

pfx

(Optional) ipv6 prefix

TABLE_path

(Optional) path table

nexthop

(Optional) next hop address

special

(Optional) special adjacencies

intf

(Optional) output interface

hw_handle

(Optional) hw handle

flags

(Optional) flags

holder

(Optional) holder

nxt_obj_type

(Optional) next obj type

hw_idx_v6adj

(Optional) v6 adj hw idx

cmn-idx

(Optional) cmn idx

lif

(Optional) lif

buf-idx

(Optional) buf idx

route_count

(Optional) total number of routes in VRF

path_count

(Optional) total number of paths in VRF

mask_length

(Optional) length of mask

routes_per_mask

(Optional)

Command Mode

- /exec

show forwarding kvfib cache on

show forwarding kvfib cache { on | off }

Syntax Description

show

forwarding

fib information

kvfib

kvfib

cache

cache

on

set variable

off

reset variable

Command Mode

- /exec

show forwarding l2 multicast

show forwarding l2 multicast { [ { vlan <vlan-id> [ { group <grpaddr> source <srcaddr> } | destination-mac <dstmac> ] } ] } [ vdc <vdc-id> ] [ module <num> ] [ __readonly__ <epoch> <resource_id> <dest_index> <hw_handle> <dmac> <text> <value> ]

Syntax Description

show

Show running system information

forwarding

Forwarding information

l2

L2 related information

multicast

Multicast related information

vlan

(Optional) Information Specific to a Vlan

vlan-id

(Optional) Vlan id value

group

(Optional) (S,G) specific information

grpaddr

(Optional) Group address

source

(Optional) source specific information

srcaddr

(Optional) Source address

destination-mac

(Optional) Destination MAC address

dstmac

(Optional) Ethernet MAC address

vdc

(Optional) VDC

vdc-id

(Optional) VDC id

module

(Optional) Slot

num

(Optional) Slot number

__readonly__

(Optional)

resource_id

(Optional) Resource Identifier

dest_index

(Optional) Destination Index Identifier

epoch

(Optional) Epoch number

hw_handle

(Optional) Hardware Handle

dmac

(Optional) Destination MAC address

text

(Optional) String

value

(Optional) Value

Command Mode

- /exec

show forwarding l2vpn ipv6 multicast route

show forwarding l2vpn ipv6 multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ]

Syntax Description

show

show

forwarding

forwarding

l2vpn

Layer 2 VPN

ipv6

ipv6

multicast

Multicast IPv6 information

route

Mcast route information

vlan

(Optional) vlan

softwarebd

(Optional) Software Bridge Domain

vlan-id

(Optional) vlan id

software-bd

(Optional) Software bd

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding l2vpn label vpls

show forwarding l2vpn label [ <label_id> ] vpls [ module module ] [ __readonly__ <label_id> ]

Syntax Description

show

show

forwarding

forwarding

l2vpn

l2vpn forwarding

label

VC label

label_id

(Optional) VC label

vpls

VPLS

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

label_id

(Optional) Label ID

Command Mode

- /exec

show forwarding l2vpn label xconnect

show forwarding l2vpn label [ <label_id> ] xconnect [ module module ] [ __readonly__ <label_id> ]

Syntax Description

show

show

forwarding

forwarding

l2vpn

l2vpn forwarding

label

VC label

label_id

(Optional) VC label

xconnect

xconnect or VPWS

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

label_id

(Optional) Label ID

Command Mode

- /exec

show forwarding l2vpn multicast outgoing-interface-list

show forwarding l2vpn multicast outgoing-interface-list [ index <oiflist-index> ]

Syntax Description

show

forwarding

Forwarding information

l2vpn

Layer 2 VPN

multicast

Multicast IPv4 information

outgoing-interface-list

show outgoing interface list info

index

(Optional) oiflist index

oiflist-index

(Optional) oiflist-index

Command Mode

- /exec

show forwarding l2vpn multicast route

show forwarding l2vpn multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ]

Syntax Description

show

show

forwarding

forwarding

l2vpn

Layer 2 VPN

multicast

Multicast IPv4 information

route

Mcast route information

vlan

(Optional) vlan

softwarebd

(Optional) Software Bridge Domain

vlan-id

(Optional) vlan id

software-bd

(Optional) Software bd

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding l2vpn service vpls

show forwarding l2vpn service vpls { { service_id { <service_id> | all } } | { vlan { <vlan_id> | vlan_all } } | { peer { { interface <intf-name> | next-hop <addr> | peer_all } } } } [ module <module> ] [ detail ]

Syntax Description

show

show

forwarding

display fib information

l2vpn

l2vpn forwarding

service

Services

vpls

Vpls

service_id

Specifies a service_id

service_id

service ID

all

all VPLS services

vlan

VLAN info

vlan_id

VLAN number

vlan_all

all VPLS services

peer

define the peer

peer_all

all peers

interface

PW interface for peer

intf-name

interface name

next-hop

Next hop to reach the peer

addr

IP address

module

(Optional) slot

module

(Optional) slot number

detail

(Optional) Display detailed information

Command Mode

- /exec

show forwarding l2vpn service xconnect

show forwarding l2vpn service xconnect { service_id { <service_id> | all } } [ module <module> ] [ detail ]

Syntax Description

show

show

forwarding

display fib information

l2vpn

l2vpn forwarding

service

Services

xconnect

xconnect or VPWS

service_id

Specify a service_id in hex

service_id

service ID

all

All service-id will be displayed

module

(Optional) slot

module

(Optional) slot number

detail

(Optional) Display detailed information

Command Mode

- /exec

show forwarding l2vpn vlan

show forwarding l2vpn vlan [ <vlan_id> ] [ module <module> ] [ __readonly__ <vlan> ]

Syntax Description

show

show

forwarding

forwarding

l2vpn

l2vpn forwarding

vlan

vlan

vlan_id

(Optional) vlan id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

vlan

(Optional) vlan

Command Mode

- /exec

show forwarding mpls

show forwarding mpls [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } [ label <label-id> | <prefix> | <v6prefix> ] | table <table_id> [ label <label-id> | <prefix> | <v6prefix> ] | label-space <label-space-id> | label <label-id> | <prefix> | <v6prefix> ] [ stats ] [ module <module> ] [ implicit ] [ platform ] [ __readonly__ [ { TABLE_mpls <label> [ <out-table-id> ] [ <fec> ] [ <out-ip> ] [ <out-intf> ] [ <out-label> ] [ <out-op> ] [ <hh> ] [ <ref-count> ] [ <in-pkts> ] [ <in-bytes> ] [ <out-pkts> ] [ <out-bytes> ] } ] ]

Syntax Description

show

show

forwarding

forwarding

mpls

mpls forwarding

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known vrf name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

label-space

(Optional) label space

label-space-id

(Optional) label space id

label

(Optional) mpls labels

label-id

(Optional) mpls label value

prefix

(Optional) Labels for single exact match route

module

(Optional) slot

module

(Optional) slot number

stats

(Optional) Label Statistics

implicit

(Optional) Display implicit label

platform

(Optional) Display platform information

__readonly__

(Optional)

TABLE_mpls

(Optional)

label

(Optional) mpls label value

out-table-id

(Optional) Output table-id

fec

(Optional) Prefix/Tunnel ID

out-ip

(Optional) Output Next Hop

out-intf

(Optional) Output Interface

out-label

(Optional) Output Label

out-op

(Optional) Output Label op

hh

(Optional) Hardware Handle

ref-count

(Optional) Ref Count

in-pkts

(Optional) Label Input Packet Stats

in-bytes

(Optional) Label Input Bytes Stats

out-pkts

(Optional) Label Output Packet Stats

out-bytes

(Optional) Label Output Bytes Stats

Command Mode

- /exec

show forwarding mpls aggregate

show forwarding mpls aggregate [ label { <label-id> | all } ] [ detail ] [ module <module> ] [ __readonly__ [ { TABLE_label_info <label> <id> [ <sw_index> ] } ] ]

Syntax Description

show

forwarding

display fib information

mpls

mpls forwaring

aggregate

aggregate label

label

(Optional) label

label-id

(Optional) label-id

all

(Optional) all

detail

(Optional) detail

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_label_info

(Optional)

label

(Optional)

id

(Optional)

sw_index

(Optional)

Command Mode

- /exec

show forwarding mpls cbts

show forwarding mpls cbts [ module <module> ] [ __readonly__ [ { TABLE_cbts <label> [ <out-intf> ] [ <out-table-id> ] [ <out-ip> ] [ <out-op> ] } ] ]

Syntax Description

show

show

forwarding

forwarding

mpls

mpls forwaring

cbts

cbts labels

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_cbts

(Optional)

label

(Optional) mpls label value

out-intf

(Optional) Output Interface

out-table-id

(Optional) Output table-id

out-ip

(Optional) Output Next Hop

out-op

(Optional) Output Label op

Command Mode

- /exec

show forwarding mpls drop-stats

show forwarding mpls drop-stats [ platform | label0-fwd-stats ] [ __readonly__ <pkts> <bytes> ]

Syntax Description

show

show

forwarding

forwarding

mpls

mpls forwarding

drop-stats

MPLS dropped packets

platform

(Optional) command to display stats per chip

label0-fwd-stats

(Optional) command to display stats for label0

__readonly__

(Optional)

pkts

(Optional) Label Packet Stats

bytes

(Optional) Label Bytes Stats

Command Mode

- /exec

show forwarding mpls ecmp

show forwarding mpls ecmp [ module <module> ] [ platform ] [ __readonly__ [ { TABLE_ecmp <type> <num_paths> <ip_paths> <mpls_paths> <ecmp_hash> <holder> <refcount> <hw_index> [ { TABLE_ecmp_paths <out-intf> <out-ip> <label_info> <hh> <refcount> } ] } ] ]

Syntax Description

show

show

forwarding

display fib information

mpls

mpls forwarding

ecmp

mpls ecmps

module

(Optional) slot

module

(Optional) slot number

platform

(Optional) show pd info

__readonly__

(Optional)

TABLE_ecmp

(Optional)

type

(Optional) ecmp type

num_paths

(Optional) No of paths

ip_paths

(Optional) No of ip paths

mpls_paths

(Optional) No of mpls paths

ecmp_hash

(Optional) ecmp hash

holder

(Optional) holder bitmap

refcount

(Optional) refcount

hw_index

(Optional) Hw index

TABLE_ecmp_paths

(Optional)

out-intf

(Optional) Output Interface

out-ip

(Optional) Output Next Hop

label_info

(Optional) rew info

hh

(Optional) Hardware Handle

refcount

(Optional) refcount

Command Mode

- /exec

show forwarding mpls option_b

show forwarding mpls option_b [ label <label> ] [ module <module> ] [ platform ] [ __readonly__ [ { TABLE_mpls_opt_b <label> [ <prefix> ] [ <v6prefix> ] [ <nxhop> ] [ <out-interface> ] [ <out-op> ] } ] ]

Syntax Description

show

show

forwarding

forwarding

mpls

mpls forwarding

option_b

Option B

label

(Optional) mpls labels

label

(Optional) mpls label value

module

(Optional) slot

module

(Optional) slot number

platform

(Optional) show pd info

__readonly__

(Optional)

TABLE_mpls_opt_b

(Optional)

label

(Optional) mpls label value

prefix

(Optional) Output Interface

nxhop

(Optional) Output Next Hop

out-interface

(Optional) Output Label op

out-op

(Optional) Output Label op

Command Mode

- /exec

show forwarding mpls srte module

show forwarding mpls srte module [ <module> ] [ __readonly__ [ { TABLE_srte <table-id> [ { TABLE_binding_label <binding-label> <parent-table-id> <parent-vobj-id> [ { TABLE_prefix <prefix> <vrf> } ] } ] } ] ]

Syntax Description

show

Show

forwarding

Forwarding information

mpls

mpls forwaring

srte

SR Traffic Engineering

module

slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_srte

(Optional)

table-id

(Optional) table id

TABLE_binding_label

(Optional)

binding-label

(Optional) binding label

parent-table-id

(Optional) parent table id

parent-vobj-id

(Optional) parent vobj id

TABLE_prefix

(Optional)

prefix

(Optional) prefix

vrf

(Optional) vrf

Command Mode

- /exec

show forwarding mpls summary

show forwarding mpls summary [ module <module> ] [ __readonly__ [ { TABLE_labels <space> <count> } <total_deagg_labels> <total_deagg_labels> ] ]

Syntax Description

show

show

forwarding

display fib information

mpls

mpls forwarding

summary

summary

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_labels

(Optional)

space

(Optional) label space

count

(Optional) number of labels

total_deagg_labels

(Optional) total deagg labels

total_deagg_labels

(Optional) total deagg labels

Command Mode

- /exec

show forwarding mpls te

show forwarding mpls te [ <te_if> ] [ detail ] [ module <module> ] [ __readonly__ { TABLE_te <id> [ <midpoint_source> ] [ <dest> ] [ <tunnel_id> ] [ <ext_tunnel_id> ] [ <lisp_id> ] [ <adjacency> ] [ <hh> ] [ <lfib_adj> ] [ <adj_refcount> ] [ <obj_refcount> ] [ <te_state> ] [ <next_hop> ] [ <next_if_index> ] [ <op_label> ] [ <backup_tunnel> ] [ <adj_key_id> ] [ <frr_label> ] [ <local_label> ] [ <adj_count> ] [ <type> ] [ <out_if> ] [ <out_lbl> ] [ <backup_if> ] [ <backup_lbl> ] } ]

Syntax Description

show

forwarding

display fib information

mpls

mpls forwarding

te

Traffic Engineering

detail

(Optional) detail

module

(Optional) slot

te_if

(Optional) tunnel-te number

module

(Optional) slot number

__readonly__

(Optional)

TABLE_te

(Optional)

id

(Optional) headend if index

midpoint_source

(Optional)

dest

(Optional)

tunnel_id

(Optional)

ext_tunnel_id

(Optional)

lisp_id

(Optional)

adjacency

(Optional)

hh

(Optional) HH

lfib_adj

(Optional) lfib adjavency is drop

adj_refcount

(Optional)

obj_refcount

(Optional)

te_state

(Optional)

next_hop

(Optional)

next_if_index

(Optional)

op_label

(Optional)

backup_tunnel

(Optional)

adj_key_id

(Optional)

frr_label

(Optional)

local_label

(Optional)

adj_count

(Optional) te related adj count

type

(Optional)

out_if

(Optional)

out_lbl

(Optional)

backup_if

(Optional)

backup_lbl

(Optional)

Command Mode

- /exec

show forwarding multicast-sr loopback interface

show forwarding multicast-sr loopback interface

Syntax Description

show

forwarding

display fib information

multicast-sr

multicast service reflect information

interface

loopback interface

loopback

loopback interface

Command Mode

- /exec

show forwarding multicast outgoing-interface-list

show forwarding multicast outgoing-interface-list { L2 | L3 | vxlan-encap } [ platform ] [ module <module> ] [ <index> ] [ __readonly__ <refcount> <num_oif> <intf> <encap_id> <slot><total_l2_oiflist><total_l3_oiflist><oiflist_idx> <hw_oiflist_idx><mcidx> ]

Syntax Description

show

forwarding

Forwarding information

multicast

Multicast IPv4 information

outgoing-interface-list

show outgoing interface list info

L2

Layer 2 oiflist

L3

Layer 3 oiflist

vxlan-encap

vxlan-encap oiflist

platform

(Optional) Display PI/PD

module

(Optional) slot

module

(Optional) slot number

index

(Optional) Outgoing Interface List Index

__readonly__

(Optional)

refcount

(Optional) Reference count

num_oif

(Optional) Number of outgoing interfaces

intf

(Optional) OIF name

encap_id

(Optional) encap_id

Command Mode

- /exec

show forwarding multicast route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | all } | table <table_id> ] [ ipv4 ] multicast route [ platform ] { [ group { <gaddr> [ <mask> ] | <gprefix> } | source { <saddr> [ <smask> ] | <sprefix> } | module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + | summary [ module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + } [ __readonly__ <table_type> <vrfname> <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> <num_prefix_insert_fail> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <rpf_ifindex> <flag> <flag_value> <route_pkts> <route_bytes> <oiflist_id> <platform_id> <oif_count> <refcount> <oifname> <oifindex> <oif_pkts> <oif_bytes> ]

Syntax Description

show

forwarding

Forwarding information

ipv4

(Optional) ipv4

multicast

Multicast IPv4 information

route

Mcast route information

platform

(Optional) Platform Details

table

(Optional) display info per vpn-id

table_id

(Optional) table number

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

group

(Optional) Multicast IPv4 Group specific info

gaddr

(Optional) Multicast IPv4 Group Address

mask

(Optional) Multicast IPv4 Group Address mask

gprefix

(Optional) Multicast IPv4 Group Prefix

source

(Optional) Multicast IPv4 Source specific info

saddr

(Optional) Multicast IPv4 Source Address

smask

(Optional) Multicast IPv4 Source Address mask

sprefix

(Optional) Multicast IPv4 Source Prefix

summary

display route counts

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

vrfname

(Optional) VRF name

num_routes

(Optional) Number of routes

num_starg_routes

(Optional) Number of (*,G) routes

num_sg_routes

(Optional) Number of (S,G) routes

num_gprefix_routes

(Optional) Number of (*,G-prefix) routes

num_prefix_insert_fail

(Optional) Prefix insert fail count

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

rpf_ifindex

(Optional) RPF Interface ifIndex

flag

(Optional) Route type flag

flag_value

(Optional) hex value of route flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

oiflist_id

(Optional) OIF list Identifier

platform_id

(Optional) Platform-index

oif_count

(Optional) Number of OIFs

refcount

(Optional) OIF list Reference Count

oifname

(Optional) OIF Interface name

oifindex

(Optional) OIF Interface ifIndex

oif_pkts

(Optional) OIF packets

oif_bytes

(Optional) OIF bytes

Command Mode

- /exec

show forwarding nve l2 ingress-replication-peers

show forwarding nve l2 ingress-replication-peers [ <peer_ip> ] + [ __readonly__ { TABLE_VLAN <vlan_id> <plt_space> <peer> + } { TABLE_PSS_VLAN <vlan_pss_id> <VNI> <vtep> <peercnt> <pss_peer> + <marked> + } ]

Syntax Description

show

show

forwarding

display fib information

nve

nve related info

l2

L2 info

ingress-replication-peers

ingress replication peer info

peer_ip

(Optional) show detailed info of a peer

__readonly__

(Optional)

TABLE_VLAN

(Optional) vlan peer ids table

vlan_id

(Optional) vlan id

plt_space

(Optional) platform space

peer

(Optional) peer_address

TABLE_PSS_VLAN

(Optional) vlan-peer in pss

vlan_pss_id

(Optional) pss_peer_id

VNI

(Optional) vni

vtep

(Optional) vtep

peercnt

(Optional) peer count

pss_peer

(Optional) peer address

marked

(Optional) marked

Command Mode

- /exec

show forwarding nve l3 adjacency tunnel

show forwarding nve l3 adjacency tunnel <tunnel_id> [ bd <bd_id> | detail | module <num> | table <table_id> ] [ __readonly__ TABLE_nvel3adj <tunnel_id> <bd_id> <table_id> <VNI> <Drop> <Refcount> <Origin> <State> <Del> <sw_index> <hw_index0> <hw_index1> <hw_index2> ]

Syntax Description

show

forwarding

display fib information

nve

nve related info

l3

Layer 3

adjacency

Adjacency info

tunnel

VXLAN tunnel

tunnel_id

tunnel_id

bd

(Optional) BD info

bd_id

(Optional) bd id

detail

(Optional) Show detailed information

module

(Optional) Slot/module

num

(Optional) Slot/module number

table

(Optional) Tenant table-id

table_id

(Optional) tenant table-id

__readonly__

(Optional)

TABLE_nvel3adj

(Optional)

tunnel_id

(Optional) tunnel_id

bd_id

(Optional) bd id

table_id

(Optional) tenant table-id

VNI

(Optional) vni

Drop

(Optional) Drop

Refcount

(Optional) Refcount

Origin

(Optional) origin

State

(Optional) state

Del

(Optional) del

sw_index

(Optional)

hw_index0

(Optional)

hw_index1

(Optional)

hw_index2

(Optional)

Command Mode

- /exec

show forwarding nve l3 ecmp

show forwarding nve l3 ecmp

Syntax Description

show

forwarding

display fib information

nve

nve related info

l3

Layer 3

ecmp

nve ecmp info

Command Mode

- /exec

show forwarding nve l3 peers

show forwarding nve l3 peers [ peers <peer_id> | tunnel <tunnel_id> | detail | module <num> ] + [ __readonly__ { TABLE_l3peers <tunnel_id> <peer_id> <peer_address> <interface> <rmac> <origin> <state> <del> <count> } ]

Syntax Description

show

show

forwarding

display fib information

nve

nve related info

l3

Layer 3

peers

nve peers

peer_id

(Optional) nve peer-id

tunnel

(Optional) VXLAN tunnel

tunnel_id

(Optional) Unique identifier for the tunnel

detail

(Optional) Show detailed information

module

(Optional) Slot/module

num

(Optional) Slot/module number

__readonly__

(Optional)

TABLE_l3peers

(Optional) all l3 nve peers

tunnel_id

(Optional) tunnel_id

peer_id

(Optional) peer_id

peer_address

(Optional) peer_address

interface

(Optional) interface

rmac

(Optional) rmac

origin

(Optional) origin

state

(Optional) state

del

(Optional) del

count

(Optional) count

Command Mode

- /exec

show forwarding nve underlay-interfaces

show forwarding nve underlay-interfaces

Syntax Description

show

show

forwarding

display fib information

nve

NVE related info

underlay-interfaces

underlay interfaces info

Command Mode

- /exec

show forwarding pss route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> } | table <table_id> ] [ ipv4 ] pss route [ module <module> ]

Syntax Description

show

show

forwarding

forwarding

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

table

(Optional) display info per vpn-id

table_id

(Optional) table number

ipv4

(Optional) ipv4

pss

display info from pss

route

route

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding restart

show forwarding restart [ module <module> ]

Syntax Description

show

forwarding

fib information

restart

restart fib

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding security group-tag

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> | vlan <vlan_id> ] [ ipv4 ] security group-tag [ <addr> ] [ module <num> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ <header> <vrfname> <tid> <pfx-count> <ipa> <tag> <tv> <vid> ]

Syntax Description

show

forwarding

display fib information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

vlan

(Optional) vlan

vlan_id

(Optional) vlan number

ipv4

(Optional) ipv4

security

display IP security information

group-tag

ip_address->security_group_tag

addr

(Optional) specific ip address

module

(Optional) slot

__readonly__

(Optional)

header

(Optional) header string

vrfname

(Optional) VRF name

tid

(Optional) table identifier

num

(Optional) module number

pfx-count

(Optional) total prefix count in VRF

ipa

(Optional) ip address

tag

(Optional) security group tag

tv

(Optional) sgt valid

vid

(Optional) vlan indentifier

Command Mode

- /exec

show forwarding security mac

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ipv4 ] security mac [ <addr> ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ <header> <vrfname> <tid> <pfx-count> <ipa> <mac> <p> <m> <v> <intf> ]

Syntax Description

show

forwarding

display fib information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

ipv4

(Optional) ipv4

security

display IP security information

mac

ip_address->mac_address

addr

(Optional) specific ip address

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

header

(Optional) header string

vrfname

(Optional) VRF name

tid

(Optional) table identifier

pfx-count

(Optional) total prefix count in VRF

ipa

(Optional) ip address

mac

(Optional) mac address

p

(Optional) 1 => ip->port binding

m

(Optional) 1 => ip->mac binding

v

(Optional) 1 => ip->vlan binding

intf

(Optional) ip->port interface

Command Mode

- /exec

show forwarding test on

show forwarding test { on | off } [ module <module> ]

Syntax Description

show

forwarding

fib information

test

show test variable

on

set variable

off

reset variable

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding trace

show forwarding trace [ clear ] [ module <module> ] [ __readonly__ <op> ]

Syntax Description

show

forwarding

display fib information

trace

display trace buffer

clear

(Optional) clear the trace buffer

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

op

(Optional) output

Command Mode

- /exec

show forwarding trace profile

show forwarding trace profile

Syntax Description

show

forwarding

display fib information

trace

display trace buffer

profile

show the collection profiling information

Command Mode

- /exec

show forwarding trace profile funcstats

show forwarding trace profile funcstats [ enable | disable ] [ module <module> ] [ __readonly__ <op> ]

Syntax Description

show

forwarding

display fib information

trace

display trace buffer

profile

show the collection profiling information

funcstats

function statistics

enable

(Optional) enable function statistics

disable

(Optional) disable function statistics

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

op

(Optional) output

Command Mode

- /exec

show fte event

show fte event [ name ] [ { <eventname> } ] [ __readonly__ <event> <description> <use_count> <latency_threshold> <latency_unit> <analytics_changed_flow_count> <latency_flow_count> ]

Syntax Description

show

Show running system information

fte

Show FTE information

event

Show Event Configuration

name

(Optional) Show the configuration for a specific FTE Event

eventname

(Optional) Specify a event

__readonly__

(Optional)

event

(Optional)

description

(Optional)

use_count

(Optional)

latency_threshold

(Optional)

latency_unit

(Optional)

analytics_changed_flow_count

(Optional)

latency_flow_count

(Optional)

Command Mode

- /exec

show fte exporter

show fte exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <exporter-id> ]

Syntax Description

show

Show running system information

fte

Show FTE information

exporter

Show FTE Exporter Configuration

name

(Optional) Show a specific FTE Exporter

exportername

(Optional) Specify an exporter

__readonly__

(Optional)

exporter

(Optional)

description

(Optional)

dest

(Optional)

vrf

(Optional)

vrf_id

(Optional)

vrf_resolved

(Optional)

dest_udp

(Optional)

source_intf

(Optional)

source_ip

(Optional)

exporter-id

(Optional)

Command Mode

- /exec

show fte monitor

show fte monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter1> <exporter2> <bucket_id> <src_addr> <dest_addr> ]

Syntax Description

show

Show running system information

fte

Show FTE information

monitor

Show Monitor Configuration

name

(Optional) Show a specific FTE Monitor

monitorname

(Optional) Specify a monitor

cache

(Optional) Flow monitor cache contents

detailed

(Optional) Show the entire cache contents

__readonly__

(Optional)

monitor

(Optional)

use_count

(Optional)

description

(Optional)

record

(Optional)

event

(Optional)

exporter1

(Optional)

exporter2

(Optional)

bucket_id

(Optional)

src_addr

(Optional)

dest_addr

(Optional)

Command Mode

- /exec

show fte record

show fte record [ name ] [ { <recordname> } | { fte-original } | { fte { protocol-port | layer2-switched { input } | { ipv4 | ipv6 | l2 } { original-input } } } ] [ __readonly__ <record> <description> <use_count> ]

Syntax Description

show

Show running system information

fte

Show FTE information

record

Show Record Configuration

name

(Optional) Show the configuration for a specific FTE Record

recordname

(Optional) Specify a record

fte-original

(Optional) Traditional IPv4 input FTE with origin ASs

fte

(Optional) Traditional FTE collection schemes

ipv4

(Optional) IPv4 collection schemes

ipv6

(Optional) IPv6 collection schemes

l2

(Optional) L2 collection schemes

layer2-switched

(Optional) Layer2-Switched collection schemes

original-input

(Optional) Input FTE

input

(Optional) Input FTE

protocol-port

(Optional) Protocol and Ports aggregation scheme

__readonly__

(Optional)

record

(Optional)

description

(Optional)

use_count

(Optional)

Command Mode

- /exec

Chapter 8. G Show Commands

- show guestshell

show guestshell

show guestshell [ { detail } ] [ __readonly__ [ TABLE_detail <name> <state> <package_name> <ova_path> <application_name> <application_version> <application_description> <key_type> <signing_method> <licensing_name> <licensing_version> <disk_reservation> <memory_reservation> <cpu_reservation> TABLE_attached_devices <type> <name> <alias> ] ]

Syntax Description

show

Show running system information

guestshell

Display guest shell service information

detail

(Optional) Detailed guest shell service information

__readonly__

(Optional) Read Only

TABLE_detail

(Optional) Virtual service detail table

name

(Optional) Virtual service name

package_name

(Optional) Virtual service package name

application_name

(Optional) Name of the application

application_version

(Optional) Version of the application

application_description

(Optional) Description of the application

key_type

(Optional) Virtual service key type

signing_method

(Optional) Method used to sign the package

licensing_name

(Optional) Name of the license

licensing_version

(Optional) Version of the license

ova_path

(Optional) Virtual service OVA path

state

(Optional) Virtual service state

disk_reservation

(Optional) Virtual service disk reservation

memory_reservation

(Optional) Virtual service memory reservation

cpu_reservation

(Optional) Virtual service CPU reservation

TABLE_attached_devices

(Optional) Attached devices table

type

(Optional) Type of the attached device

name

(Optional) Name of the attached device

alias

(Optional) Alias for the attached device

Command Mode

- /exec

Chapter 9. H Show Commands

- show hardware

- show hardware access-list lou resource threshold

- show hardware access-list resource pooling

- show hardware access-list tcam

- show hardware capacity

- show hardware capacity eobc

- show hardware capacity fabric-utilization

- show hardware capacity forwarding

- show hardware capacity interface

- show hardware capacity module

- show hardware capacity power

- show hardware fabricpath mac-learning module

- show hardware feature-capability

- show hardware flow aging

- show hardware flow entry address type

- show hardware flow ip

- show hardware flow ipmac

- show hardware flow ipv6

- show hardware flow l2

- show hardware flow mpls

- show hardware flow sampler

- show hardware flow utilization

- show hardware forwarding interface statistics mode

- show hardware forwarding memory health detail

- show hardware forwarding memory health summary

- show hardware ip verify

- show hardware profile buffer monitor show hardware profile buffer monitor internal

- show hardware profile forwarding-mode

- show hardware profile latency monitor sampling show hardware profile latency monitor

- show hardware profile module

- show hardware profile status

- show hardware profile tcam region

- show hardware qos afd profile

- show hardware qos burst-detect max-records

- show hardware qos eoq stats-class

- show hardware qos include ipg

- show hardware qos ing-pg-hdrm-reserve

- show hardware qos ing-pg-no-min

- show hardware qos ing-pg-share

- show hardware qos min-buffer

- show hardware qos ns-buffer-profile

- show hardware qos ns-mcq3-alias

- show hardware rate-limiter

- show hardware rate-limiter

- show hardware rate-limiter span-egress

- show hardware rl snmp class-id

- show hardware rl snmp global class-id

- show hardware rl snmp local snmp-index class-id

- show hostname

- show hosts

- show hsrp

- show hsrp anycast

- show hsrp anycast interface vlan

- show hsrp anycast remote-db

- show hsrp anycast summary

- show hsrp bfd-sessions

- show hsrp bfd-sessions

- show hsrp delay

- show hsrp ext-mib sec-addr

- show hsrp ext-mib use-bia

- show hsrp mgo

- show hsrp summary

show hardware

show hardware [ __readonly__ <header_str> <bios_ver_str> [ <loader_ver_str> ] <kickstart_ver_str> [ <sys_ver_str> ] <bios_cmpl_time> <kick_file_name> <kick_cmpl_time> <kick_tmstmp> [ <isan_file_name> ] [ <isan_cmpl_time> ] [ <isan_tmstmp> ] <chassis_id> [ <module_id> ] <cpu_name> <memory> <mem_type> <proc_board_id> [ <host_name> ] <bootflash_size> [ <slot0_size> ] [ <slot1_size> ] <kern_uptm_days> <kern_uptm_hrs> <kern_uptm_mins> <kern_uptm_secs> [ <rr_usecs> ] [ <rr_ctime> ] <rr_reason> [ <rr_sys_ver> ] [ <rr_service> ] [ <manufacturer> ] { TABLE_slot [ TABLE_slot_info [ [ <num_slot_str> ] [ <status_ok_empty> ] [ [ <type> [ <num_submods> ] ] <model_num> <hw_ver> <part_num> <part_revision> <manuf_date> <serial_num> <CLEI_code> [ <num_slot_str> ] ] ] ] } ]

Syntax Description

show

Show running system information

hardware

Show hardware information

__readonly__

(Optional)

header_str

(Optional)

bios_ver_str

(Optional)

loader_ver_str

(Optional)

kickstart_ver_str

(Optional)

sys_ver_str

(Optional)

bios_cmpl_time

(Optional)

kick_file_name

(Optional)

kick_cmpl_time

(Optional)

kick_tmstmp

(Optional)

isan_file_name

(Optional)

isan_cmpl_time

(Optional)

isan_tmstmp

(Optional)

chassis_id

(Optional)

module_id

(Optional)

cpu_name

(Optional)

memory

(Optional)

mem_type

(Optional)

proc_board_id

(Optional)

bootflash_size

(Optional)

slot0_size

(Optional)

slot1_size

(Optional)

host_name

(Optional)

kern_uptm_days

(Optional)

kern_uptm_hrs

(Optional)

kern_uptm_mins

(Optional)

kern_uptm_secs

(Optional)

rr_usecs

(Optional)

rr_ctime

(Optional)

rr_reason

(Optional)

rr_sys_ver

(Optional)

rr_service

(Optional)

manufacturer

(Optional)

TABLE_slot

(Optional) Slot

num_slot_str

(Optional) Number of elements

TABLE_slot_info

(Optional) Slot Info

status_ok_empty

(Optional) Status (Present or Absent)

type

(Optional) Description of the element

num_submods

(Optional) Number of Submodules

model_num

(Optional) Model Number

hw_ver

(Optional) Hardware version

part_num

(Optional) Part Number

part_revision

(Optional) Part revision

manuf_date

(Optional) Manufacturing date

serial_num

(Optional) Serial Number

CLEI_code

(Optional) CLEI code

Command Mode

- /exec

show hardware access-list lou resource threshold

show hardware access-list lou resource threshold [ __readonly__ { current [ { lou [ { resource [ { threshold [ { <threshold_value> } ] } ] } ] } ] } ]

Syntax Description

show

Show running system information

hardware

Show hardware information

access-list

Access Control List

lou

LOU

resource

hardware resource

threshold

port expansion threshold

__readonly__

(Optional)

current

(Optional)

lou

(Optional)

resource

(Optional)

threshold

(Optional)

threshold_value

(Optional)

Command Mode

- /exec

show hardware access-list resource pooling

show hardware access-list resource pooling [ __readonly__ <mod-num> <status> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

access-list

Access Control List

resource

Hardware resource

pooling

ACL programming across TCAM banks

__readonly__

(Optional)

mod-num

(Optional) module number

status

(Optional) Banchaining status

Command Mode

- /exec

show hardware access-list tcam

show hardware access-list tcam { { template { nfe | nfe2 | l2-l3 | l3 | <name> | all } } | { region } } [ __readonly__ { TCAM_Region [ { TABLE_Sizes <type> <tcam_size> <tcam_width> } ] } ]

Syntax Description

show

Show running system information

hardware

Show hardware information

access-list

Access Control List

tcam

Show tcam parameters

region

Show tcam region sizes

__readonly__

(Optional)

TCAM_Region

(Optional)

TABLE_Sizes

(Optional)

type

(Optional)

tcam_size

(Optional)

tcam_width

(Optional)

template

Specify template name

nfe

NFE (Trident2) TCAM template

nfe2

NFE2 (Tomahawk) tcam template

l2-l3

L2-L3 default tcam template

l3

L3 default tcam template

name

Name of custom template to be displayed

all

Display all custom templates

Command Mode

- /exec

show hardware capacity

show hardware capacity

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

Hardware usage levels for Power, Switching Fabric, Flash, etc

Command Mode

- /exec

show hardware capacity eobc

show hardware capacity eobc [ __readonly__ { eobc_usage [ <eobc_tx_pps> ] [ <eobc_tx_packets> ] [ <eobc_tx_dropped> ] [ <eobc_rx_pps> ] [ <eobc_rx_packets> ] [ <eobc_rx_dropped> ] } ]

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

resource inventory and/or usage level

eobc

EOBC resources

__readonly__

(Optional)

eobc_usage

(Optional)

eobc_tx_packets

(Optional)

eobc_tx_dropped

(Optional)

eobc_tx_pps

(Optional)

eobc_rx_packets

(Optional)

eobc_rx_dropped

(Optional)

eobc_rx_pps

(Optional)

Command Mode

- /exec

show hardware capacity fabric-utilization

show hardware capacity fabric-utilization [ __readonly__ { TABLE_fabutil <mod> <bandwidth> <ingress> <egress> } ]

Syntax Description

show

Show running system information

hardware

Show hardware information

capacity

resource inventory and/or usage level

fabric-utilization

Show per module Fabric utilization

__readonly__

(Optional)

TABLE_fabutil

(Optional) fabric utilization table

mod

(Optional)

bandwidth

(Optional)

ingress

(Optional)

egress

(Optional)

Command Mode

- /exec

show hardware capacity forwarding

show hardware capacity forwarding

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

Hardware usage levels for Power, Switching Fabric, Flash, etc

forwarding

L2/L3 Forwarding resources

Command Mode

- /exec

show hardware capacity interface

show hardware capacity interface [ __readonly__ { TABLE_moddrops <mod_num_drops> <tx_drops> <rx_drops> <max_tx_port> <max_rx_port> } { TABLE_modbuffers <mod_num_buffers> <tx_buffers> <rx_buffers> } ]

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

Usage levels

interface

Interface Resources - Tx/Rx drops and Tx/Rx buffers

__readonly__

(Optional) Read Only

mod_num_drops

(Optional) Module number for Tx/Rx drops

TABLE_moddrops

(Optional) show module

tx_drops

(Optional) Tx drops

rx_drops

(Optional) Rx drops

max_tx_port

(Optional) Port with max Tx drops

max_rx_port

(Optional) Port with max Rx drops

mod_num_buffers

(Optional) Module number for Tx/Rx buffers

TABLE_modbuffers

(Optional) show module

tx_buffers

(Optional) Tx buffers

rx_buffers

(Optional) Rx buffers

Command Mode

- /exec

show hardware capacity module

show hardware capacity module [ __readonly__ { sup_ha_status [ <sup_ha_admin_status> ] [ <sup_ha_oper_status> ] [ <dual_sup_hw_state> ] [ <redundancy_state> ] } { switch_resouces { TABLE_lcinfo <mod_num> <model_num> <part_num> <serial_num> } [ { TABLE_xbarinfo <mod_num1> <model_num1> <part_num1> <serial_num1> } ] } { TABLE_flash_nvram_info <mod_num2> <dev_name> <total_bytes> <free_bytes> <percent_used> } ]

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

resource inventory and/or usage level

module

SUP, LC, XBAR

__readonly__

(Optional)

sup_ha_status

(Optional)

sup_ha_admin_status

(Optional)

sup_ha_oper_status

(Optional)

dual_sup_hw_state

(Optional)

redundancy_state

(Optional)

switch_resouces

(Optional)

TABLE_lcinfo

(Optional)

mod_num

(Optional)

model_num

(Optional)

part_num

(Optional)

serial_num

(Optional)

TABLE_xbarinfo

(Optional)

mod_num1

(Optional)

model_num1

(Optional)

part_num1

(Optional)

serial_num1

(Optional)

TABLE_flash_nvram_info

(Optional)

mod_num2

(Optional)

dev_name

(Optional)

total_bytes

(Optional)

free_bytes

(Optional)

percent_used

(Optional)

Command Mode

- /exec

show hardware capacity power

show hardware capacity power [ __readonly__ { power_summary <ps_redun_mode_admin> <ps_redun_mode_oper> <power_total> <power_rsvd> <power_rsvd_percent> <power_given_mod> <power_given_mod_percent> <power_avail> <power_avail_percent> <power_out_actual_draw> <power_input_actual_draw> } ]

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

resource inventory and/or usage level

power

power summary

__readonly__

(Optional)

power_summary

(Optional)

ps_redun_mode_admin

(Optional) Mode: Redundant or Non-redundant

ps_redun_mode_oper

(Optional) Mode: Redundant or Non-redundant

power_total

(Optional)

power_rsvd

(Optional)

power_rsvd_percent

(Optional)

power_given_mod

(Optional)

power_given_mod_percent

(Optional)

power_avail

(Optional)

power_avail_percent

(Optional)

power_out_actual_draw

(Optional) Total Power Output, Actuals

power_input_actual_draw

(Optional) Total Power Input, Actuals

Command Mode

- /exec

show hardware fabricpath mac-learning module

show hardware fabricpath mac-learning module <module> [ __readonly__ { [ { TABLE_module <module_num> <port_group> <mac_learning> } ] } ]

Syntax Description

show

Show running system information

hardware

Show hardware information

fabricpath

Fabric Path

mac-learning

MAC Learning

module

Specify a module number

module

Specify a module number

__readonly__

(Optional)

TABLE_module

(Optional)

module_num

(Optional) Specify a module number

port_group

(Optional)

mac_learning

(Optional)

Command Mode

- /exec

show hardware feature-capability

show hardware feature-capability [ detailed ] [ __readonly__ [ TABLE_feature_support <feature_name> [ TABLE_module_support <mod_inst> <support> ] ] ]

Syntax Description

show

Show running system information

hardware

Show hardware information

feature-capability

show registered features supported

detailed

(Optional) detailed

__readonly__

(Optional)

TABLE_feature_support

(Optional) show features supported

feature_name

(Optional) feature name

TABLE_module_support

(Optional) show registered features supported

mod_inst

(Optional) module instance

support

(Optional) support details

Command Mode

- /exec

show hardware flow aging

show hardware flow aging [ instance <inst> ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

aging

Aging Info

instance

(Optional) Instance

inst

(Optional) Earl Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow entry address type

show hardware flow entry address <addr> type { ip | ipv6 | l2 | mpls } [ instance <inst> ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

entry

Netflow Table Entry

address

Netflow Table Address

addr

Netflow Table Address

type

Flow Type

ip

Internet Protocol Version 4

ipv6

Internet Protocol Version 6

l2

Layer 2 Protocol

mpls

MPLS Protocol

instance

(Optional) Instance

inst

(Optional) Earl Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow ip

show hardware flow ip [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

ip

Internet Protocol Version 4

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow ipmac

show hardware flow ipmac [ { { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

ipmac

IPv4+MAC

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow ipv6

show hardware flow ipv6 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

ipv6

Internet Protocol Version 6

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow l2

show hardware flow l2 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

l2

Layer 2 Protocol

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow mpls

show hardware flow mpls [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

mpls

MPLS Protocol

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow sampler

show hardware flow sampler { all | count | index <index> | name <sname> } [ detail ] [ instance <inst> ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

sampler

Flow Sampler

all

Netflow Sampler Usage

count

Netflow Sampler Utilization

index

Netflow Sampler Index

index

Netflow Sampler Index

name

Netflow Sampler Name

sname

Netflow Sampler Name

detail

(Optional) Detailed Output Display

instance

(Optional) Instance

inst

(Optional) Clipper Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow utilization

show hardware flow utilization [ instance <inst> ] [ module <num> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

utilization

NT Table Utilization

instance

(Optional) Instance

inst

(Optional) Earl Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware forwarding interface statistics mode

show hardware forwarding interface statistics mode [ __readonly__ { system [ { <sysmode> } ] [ { TABLE_module <module> <modmode> } ] } ]

Syntax Description

show

Show running system information

hardware

Show hardware information

forwarding

Show hardware information for forwarding path

interface

Interface

statistics

Statistics

mode

Statistics mode

__readonly__

(Optional)

system

(Optional)

sysmode

(Optional)

TABLE_module

(Optional)

module

(Optional) Specify a module number

modmode

(Optional)

Command Mode

- /exec

show hardware forwarding memory health detail

show hardware forwarding memory health detail [ __readonly__ { memscan_interval <mscan_interval> } { memscan_rate <mscan_rate> } [ TABLE_ser <table_name> <entry_count> <table_head> <table_tail> [ TABLE_ser_entry_new <n_entry_index> [ <reg_id> ] [ <reg_port> ] [ <reg_index> ] [ <table_id> ] [ <table_index> ] <detections> <corrections> [ <last_detection_ts> ] [ <last_correction_ts> ] ] [ TABLE_ser_entry_old <o_entry_index> <mem_addr> <cause_bits> <event_type> <last_event> <last_time> ] ] [ { parity_detect_counter <parity_detect_cnt> } ] [ { parity_correct_counter <parity_correct_cnt> } ] [ { reg_parity_detect_counter <reg_parity_detect_cnt> } ] [ { reg_parity_correct_counter <reg_parity_correct_cnt> } ] [ { tcam_parity_detect_counter <tcam_parity_detect_cnt> } ] [ { tcam_parity_correct_counter <tcam_parity_correct_cnt> } ] [ { sram_parity_detect_counter <sram_parity_detect_cnt> } ] [ { sram_parity_correct_counter <sram_parity_correct_cnt> } ] [ { TABLE_ser_tbl_parity <table_id> <detections> <corrections> } ] ]

Syntax Description

show

Show running system information

hardware

Show hardware information

forwarding

forwarding information

memory

memory information

health

memory health information

detail

show the detail

__readonly__

(Optional) Read Only

memscan_interval

(Optional) memory scan interval value

mscan_interval

(Optional) mem scan interval

memscan_rate

(Optional) memory scan rate value

mscan_rate

(Optional) mem scan rate

TABLE_ser

(Optional) ser table list

table_name

(Optional) table name

entry_count

(Optional) total entries in table

table_head

(Optional) start of entry index

table_tail

(Optional) end of entry index

TABLE_ser_entry_new

(Optional) ser table entry with new format

n_entry_index

(Optional) entry index

reg_id

(Optional) register id

reg_port

(Optional) port

reg_index

(Optional) register index

table_id

(Optional) table id

table_index

(Optional) table_index

detections

(Optional) parity detetction count

corrections

(Optional) parity correction count

last_detection_ts

(Optional) last detetction timestamp

last_correction_ts

(Optional) last correction timestamp

TABLE_ser_entry_old

(Optional) ser table entry with new format

o_entry_index

(Optional) table entry index

mem_addr

(Optional) memory address

cause_bits

(Optional) cause bit

event_type

(Optional) type of event

last_event

(Optional) last event that occurred

last_time

(Optional) last time of event

parity_detect_counter

(Optional) parity detect count

parity_detect_cnt

(Optional) count of parity detect

parity_correct_counter

(Optional) parity correct count

parity_correct_cnt

(Optional) count of parity correct

reg_parity_detect_counter

(Optional) reg parity detect count

reg_parity_detect_cnt

(Optional) count of reg parity detect

reg_parity_correct_counter

(Optional) reg parity correct count

reg_parity_correct_cnt

(Optional) count of reg parity correct

tcam_parity_detect_counter

(Optional) tcam parity detect count

tcam_parity_detect_cnt

(Optional) count of tcam parity detect

tcam_parity_correct_counter

(Optional) tcam parity correct count

tcam_parity_correct_cnt

(Optional) count of tcam parity correct

sram_parity_detect_counter

(Optional) sram parity detect count

sram_parity_detect_cnt

(Optional) count of sram parity detect

sram_parity_correct_counter

(Optional) sram parity correct count

sram_parity_correct_cnt

(Optional) count of sram parity correct

TABLE_ser_tbl_parity

(Optional) all ser tables

table_id

(Optional) table name

detections

(Optional) parity detection count for ser table

corrections

(Optional) parity correction count for ser table

Command Mode

- /exec

show hardware forwarding memory health summary

show hardware forwarding memory health summary [ __readonly__ [ { parity_detect_counter <parity_detect_cnt> } ] [ { parity_correct_counter <parity_correct_cnt> } ] [ { reg_parity_detect_counter <reg_parity_detect_cnt> } ] [ { reg_parity_correct_counter <reg_parity_correct_cnt> } ] [ { tcam_parity_detect_counter <tcam_parity_detect_cnt> } ] [ { tcam_parity_correct_counter <tcam_parity_correct_cnt> } ] [ { sram_parity_detect_counter <sram_parity_detect_cnt> } ] [ { sram_parity_correct_counter <sram_parity_correct_cnt> } ] [ { TABLE_ser_tbl_parity <table_id> <detections> <corrections> } ] ]

Syntax Description

show

Show running system information

hardware

Show hardware information

forwarding

forwarding information

memory

memory information

health

memory health information

summary

show the summary

__readonly__

(Optional) Read Only

parity_detect_counter

(Optional) parity detect count

parity_detect_cnt

(Optional) count of parity detect

parity_correct_counter

(Optional) parity correct count

parity_correct_cnt

(Optional) count of parity correct

reg_parity_detect_counter

(Optional) reg parity detect count

reg_parity_detect_cnt

(Optional) count of reg parity detect

reg_parity_correct_counter

(Optional) reg parity correct count

reg_parity_correct_cnt

(Optional) count of reg parity correct

tcam_parity_detect_counter

(Optional) tcam parity detect count

tcam_parity_detect_cnt

(Optional) count of tcam parity detect

tcam_parity_correct_counter

(Optional) tcam parity correct count

tcam_parity_correct_cnt

(Optional) count of tcam parity correct

sram_parity_detect_counter

(Optional) sram parity detect count

sram_parity_detect_cnt

(Optional) count of sram parity detect

sram_parity_correct_counter

(Optional) sram parity correct count

sram_parity_correct_cnt

(Optional) count of sram parity correct

TABLE_ser_tbl_parity

(Optional) all ser tables

table_id

(Optional) table name

detections

(Optional) parity detection count for ser table

corrections

(Optional) parity correction count for ser table

Command Mode

- /exec

show hardware ip verify

show hardware [ forwarding ] ip verify [ module <module> ] [ __readonly__ <info_str> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

forwarding

(Optional) Show hardware information for forwarding path

ip

IP

verify

Show IP packet verification checks enabled in hardware

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

info_str

(Optional) IDS Check Stats

Command Mode

- /exec

show hardware profile buffer monitor show hardware profile buffer monitor internal

show hardware profile buffer monitor [ interface <intf-num> | buffer-block <buf-blk> | multicast <mcst-blk> ] { brief | detail [ last <samples-per-intf> ] | sampling } [ module <module> ] | show hardware profile buffer monitor { internal-raw | summary [ module <module> ] } [ __readonly__ <cmd_name> <cmd_issue_time> [ TABLE_summary <summary_util_name> <summary_1sec_util> <summary_5sec_util> <summary_60sec_util> <summary_5min_util> <summary_1hr_util> <summary_total_buffer> <summary_class_threshold> ] [ TABLE_ucst_hdr <ucst_hdr_util_name> <ucst_hdr_1sec_util> <ucst_hdr_5sec_util> <ucst_hdr_60sec_util> <ucst_hdr_5min_util> <ucst_hdr_1hr_util> <ucst_hdr_total_buffer> <ucst_hdr_class_threshold> ] [ TABLE_brief_entry <brief_util_name> <brief_1sec_util> <brief_5sec_util> <brief_60sec_util> <brief_5min_util> <brief_1hr_util> ] [ TABLE_mcst_hdr <mcst_hdr_util_name> <mcst_hdr_1sec_util> <mcst_hdr_5sec_util> <mcst_hdr_60sec_util> <mcst_hdr_5min_util> <mcst_hdr_1hr_util> <mcst_hdr_total_buffer> <mcst_hdr_class_threshold> ] [ TABLE_detail_entry <detail_util_name> <detail_util_state> <time_stamp> <384k_util> <768k_util> <1152k_util> <1536k_util> <1920k_util> <2304k_util> <2688k_util> <3072k_util> <3456k_util> <3840k_util> <4224k_util> <4608k_util> <4992k_util> <5376k_util> <5760k_util> <6144k_util> ] [ TABLE_sampling <sampling_interval> ] ]

Syntax Description

show

Show running system information

hardware

Show hardware profile buffer monitor data

profile

profile buffer monitor data

buffer

buffer

monitor

buffer monitor

interface

(Optional) show buffer monitoring data of an interface

intf-num

(Optional) show buffer monitoring data of an interface

buffer-block

(Optional) buffer block

buf-blk

(Optional) buffer block

multicast

(Optional) multicast buffer block

mcst-blk

(Optional) multicast buffer block

brief

show brief buffer monitor data

detail

show detail buffer monitor data

internal-raw

show buffer monitoring internal raw data

summary

show summary buffer monitor data

sampling

show sampling interval

last

(Optional) show detail buffer monitor data for last N intervals

samples-per-intf

(Optional) number of samples per interface, max 300

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional) Read Only

cmd_name

(Optional) Command Name

cmd_issue_time

(Optional) Command Issue Time

TABLE_summary

(Optional) Table Summary

summary_util_name

(Optional) Names of Summary Utilization

summary_1sec_util

(Optional) Summary 1sec Buffer Utilization

summary_5sec_util

(Optional) Summary 5sec Buffer Utilization

summary_60sec_util

(Optional) Summary 60sec Buffer Utilization

summary_5min_util

(Optional) Summary 5min Buffer Utilization

summary_1hr_util

(Optional) Summary 1hour Buffer Utilization

summary_total_buffer

(Optional) Summary Total Buffer Available

summary_class_threshold

(Optional) Summary Buffer Threshold of Default Class

TABLE_ucst_hdr

(Optional) Table Ucst Header

ucst_hdr_util_name

(Optional) Names of Utilization

ucst_hdr_1sec_util

(Optional) Ucst 1sec Buffer Utilization

ucst_hdr_5sec_util

(Optional) Ucst 5sec Buffer Utilization

ucst_hdr_60sec_util

(Optional) Ucst 60sec Buffer Utilization

ucst_hdr_5min_util

(Optional) Ucst 5min Buffer Utilization

ucst_hdr_1hr_util

(Optional) Ucst 1hour Buffer Utilization

ucst_hdr_total_buffer

(Optional) Ucst Total Buffer Available

ucst_hdr_class_threshold

(Optional) Ucst Buffer Threshold of Default Class

TABLE_brief_entry

(Optional) Table Brief Entry

brief_util_name

(Optional) Brief Names of Utilization

brief_1sec_util

(Optional) Brief 1sec Buffer Utilization

brief_5sec_util

(Optional) Brief 5sec Buffer Utilization

brief_60sec_util

(Optional) Brief 60sec Buffer Utilization

brief_5min_util

(Optional) Brief 5min Buffer Utilization

brief_1hr_util

(Optional) Brief 1hour Buffer Utilization

TABLE_mcst_hdr

(Optional) Table Mcst Header

mcst_hdr_util_name

(Optional) Mcst Buffer Block Names of Utilization

mcst_hdr_1sec_util

(Optional) Mcst Buffer Block 1sec Buffer Utilization

mcst_hdr_5sec_util

(Optional) Mcst Buffer Block 5sec Buffer Utilization

mcst_hdr_60sec_util

(Optional) Mcst Buffer Block 60sec Buffer Utilization

mcst_hdr_5min_util

(Optional) Mcst Buffer Block 5min Buffer Utilization

mcst_hdr_1hr_util

(Optional) Mcst Buffer Block 1hour Buffer Utilization

mcst_hdr_total_buffer

(Optional) Mcst Total Buffer Available

mcst_hdr_class_threshold

(Optional) Mcst Buffer Threshold of Default Class

TABLE_detail_entry

(Optional) Table Detail Entry

detail_util_name

(Optional) Detail Names of Utilization

detail_util_state

(Optional) Detail State of Utilization

time_stamp

(Optional) Time Stamp of Entry

384k_util

(Optional) 384KB Buffer Utilization

768k_util

(Optional) 768KB Buffer Utilization

1152k_util

(Optional) 1152KB Buffer Utilization

1536k_util

(Optional) 1536KB Buffer Utilization

1920k_util

(Optional) 1920KB Buffer Utilization

2304k_util

(Optional) 2304KB Buffer Utilization

2688k_util

(Optional) 2688KB Buffer Utilization

3072k_util

(Optional) 3072KB Buffer Utilization

3456k_util

(Optional) 3456KB Buffer Utilization

3840k_util

(Optional) 3840KB Buffer Utilization

4224k_util

(Optional) 4224KB Buffer Utilization

4608k_util

(Optional) 4608KB Buffer Utilization

4992k_util

(Optional) 4992KB Buffer Utilization

5376k_util

(Optional) 5376KB Buffer Utilization

5760k_util

(Optional) 5760KB Buffer Utilization

6144k_util

(Optional) 6144KB Buffer Utilization

TABLE_sampling

(Optional) Table Sampling

sampling_interval

(Optional) Sampling Interval

Command Mode

- /exec

show hardware profile forwarding-mode

show hardware profile forwarding-mode

Syntax Description

show

Show running system information

hardware

Show hardware profile forwarding-mode

profile

profile forwarding-mode

forwarding-mode

forwarding-mode

Command Mode

- /exec

show hardware profile latency monitor sampling show hardware profile latency monitor

show hardware profile latency monitor { sampling | threshold } [ module <module> ] | show hardware profile latency monitor { { summary [ detail | clear-timestamp ] } [ interface <intf-num> ] | { summary [ brief | sort | top ] } | { raw [ verbose ] } [ module <module> ] } [ __readonly__ <cmd_issue_time> <device_instance> [ TABLE_sampling <sampling_interval> ] [ TABLE_threshold <threshold_avg> <threshold_max> ] [ TABLE_summary <summary_egress_port> <summary_sampling_interval> <summary_min_latency> <summary_max_latency> <summary_avg_latency> <summary_std_deviation> ] [ TABLE_detail <detail_timestamp> <detail_ifindex> <detail_fcnt> <detail_min_latency> <detail_max_latency> <detail_avg_latency> ] [ TABLE_brief <brief_egress_port> <brief_avg_latency> ] ]

Syntax Description

show

Show running system information

hardware

Show hardware profile latency monitor data

profile

profile latency monitor data

latency

latency

monitor

latency monitor

sampling

show sampling interval

threshold

show threshold configured

summary

show switch-wide latency monitor data

detail

(Optional) show switch-wide or per-interface raw latency monitor data

clear-timestamp

(Optional) show switch-wide or per-interface latency clear timestamp

interface

(Optional) show per-interface latency monitor data

intf-num

(Optional) show per-interface latency monitor data

brief

(Optional) show switch-wide avegare latency

sort

(Optional) show switch-wide avergae latency in descending order

top

(Optional) show switch-wide top ten avergae latency

raw

show switch-wide or per-interface raw latency monitor data

verbose

(Optional) show switch-wide or per-interface raw latency monitor data

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional) Read only

cmd_issue_time

(Optional) Command issue time

device_instance

(Optional) Device instance

TABLE_sampling

(Optional) Table Sampling

sampling_interval

(Optional) Sampling Interval

TABLE_threshold

(Optional) Table Threshold

threshold_avg

(Optional) Threshold Average

threshold_max

(Optional) Threshold Max

TABLE_summary

(Optional) Table summary

summary_egress_port

(Optional) Summary Egress Port

summary_sampling_interval

(Optional) Summary Sampling Interval

summary_min_latency

(Optional) Summary Min latency

summary_max_latency

(Optional) Summary Max latency

summary_avg_latency

(Optional) Summary Avg latency

summary_std_deviation

(Optional) Summary Std Deviation

TABLE_detail

(Optional) Table summary detail

detail_timestamp

(Optional) Detail Timestamp

detail_ifindex

(Optional) Detail ifindex

detail_fcnt

(Optional) Detail fcnt

detail_min_latency

(Optional) Detail Min latency

detail_max_latency

(Optional) Detail Max latency

detail_avg_latency

(Optional) Detail Avg latency

TABLE_brief

(Optional) Table summary brief

brief_egress_port

(Optional) Brief Egress Port

brief_avg_latency

(Optional) Brief Avg latency

Command Mode

- /exec

show hardware profile module

show hardware profile module <module>

Syntax Description

show

Show running system information

hardware

Show hardware profile

profile

Profile settings

module

Enter module number

module

Command Mode

- /exec

show hardware profile status

show hardware profile status [ module <module> ] [ detail ] [ __readonly__ { <total_lpm> <total_host> <reserved_lpm> <max_host4_limit> <max_host6_limit> <max_mcast_limit> <max_mcast6_limit> <used_lpm_total> <used_v4_lpm> <used_v6_lpm> <used_v6_lpm_128> <used_host_lpm_total> <used_host_v4_lpm> <used_host_v6_lpm> <used_mcast> <used_mcast6> <used_mcast_oifl> <used_host_in_host_total> <used_host4_in_host> <used_host6_in_host> <mfib_fd_status> <mfib_fd_maxroute> <mfib_fd_count> <max_v6_lpm_65_to_127_limit> <max_v6_lpm_limit> <max_ecmp_table_limit> <used_ecmp_table> <lpm_to_host_migrate_table> <host_to_lpm_migrate_table> <max_mcast_transit_route_limit> <used_mcast_transit_routes> <max_ecmp_nh_table_limit> <used_ecmp_nh_table> } ]

Syntax Description

show

Show running system information

hardware

Show hardware usage settings

profile

Show current table usage

status

Show status of dynamic resource allocation

module

(Optional) Slot/module

module

(Optional) Slot/module number

detail

(Optional) Show detailed information

__readonly__

(Optional) Read only

total_lpm

(Optional) Total LPM Entries

total_host

(Optional) Total Host Entries

reserved_lpm

(Optional) Reserved LPM Entries

max_host4_limit

(Optional) Max Host4 Limit Entries

max_host6_limit

(Optional) Max Host6 Limit Entries

max_mcast_limit

(Optional) Max Mcast Limit Entries

max_mcast6_limit

(Optional) Max IPv6 Mcast Limit Entries

used_lpm_total

(Optional) Used LPM Entries (Total)

used_v4_lpm

(Optional) Used IPv4 LPM Entries

used_v6_lpm

(Optional) Used IPv6 LPM Entries

used_v6_lpm_128

(Optional) Used IPv6 LPM_128 Entries

used_host_lpm_total

(Optional) Used Host Entries in LPM (Total)

used_host_v4_lpm

(Optional) Used Host4 Entries in LPM

used_host_v6_lpm

(Optional) Used Host6 Entries in LPM

used_mcast

(Optional) Used Mcast Entries

used_mcast6

(Optional) Used IPv6 Mcast Entries

used_mcast_oifl

(Optional) Used Mcast OIFL Entries

used_host_in_host_total

(Optional) Used Host Entries in Host (Total)

used_host4_in_host

(Optional) Used Host4 Entries in Host

used_host6_in_host

(Optional) Used Host6 Entries in Host

mfib_fd_status

(Optional) MFIB fd status

mfib_fd_maxroute

(Optional) MFIB fd maxroute

mfib_fd_count

(Optional) MFIB fd count

max_v6_lpm_65_to_127_limit

(Optional) Max Ucast IPv6 LPM_65_to_127 Limit Entries

max_v6_lpm_limit

(Optional) Max Ucast IPv6 LPM Limit Entries

max_ecmp_table_limit

(Optional) Max ECMP table Limit Entries

used_ecmp_table

(Optional) Used ECMP Table Entries

lpm_to_host_migrate_table

(Optional) Times Route Migrated from LPM to Host Table

host_to_lpm_migrate_table

(Optional) Times Route Migrated from Host to LPM Table

max_mcast_transit_route_limit

(Optional) Max Mcast Transit Route Limit Entries

used_mcast_transit_routes

(Optional) Used Mcast Transit Routes

max_ecmp_nh_table_limit

(Optional) Max ECMP NH table Limit Entries

used_ecmp_nh_table

(Optional) Used ECMP NH Table Entries

Command Mode

- /exec

show hardware profile tcam region

show hardware profile tcam region [ __readonly__ { TCAM_Region [ { TABLE_Sizes <tcam_compat_type> <tcam_compat_size> <tcam_compat_width> } ] } ]

Syntax Description

show

Show running system information

hardware

Show hardware information

profile

profile

tcam

Show tcam parameters

region

Show tcam region sizes

__readonly__

(Optional)

TCAM_Region

(Optional)

TABLE_Sizes

(Optional)

tcam_compat_type

(Optional)

tcam_compat_size

(Optional)

tcam_compat_width

(Optional)

Command Mode

- /exec

show hardware qos afd profile

show hardware qos afd profile [ module <module> ] [ __readonly__ TABLE_qos_afd_profile <module> <prof-desc> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

afd

Show Approximate Fair Dropping config

profile

Show AFD profile config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_afd_profile

(Optional) the xml qos_afd_profile configuration

prof-desc

(Optional) profile description

Command Mode

- /exec

show hardware qos burst-detect max-records

show hardware qos burst-detect max-records [ __readonly__ TABLE_qos_burstdetect_maxrecords ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

burst-detect

Show oobst burst-detect info

max-records

Show oobst burst-detect max-records

__readonly__

(Optional)

TABLE_qos_burstdetect_maxrecords

(Optional) the xml qos_burst-detect max-records configuration

Command Mode

- /exec

show hardware qos eoq stats-class

show hardware qos eoq stats-class [ module <module> ] [ __readonly__ TABLE_qos_eoq_stats_class <module> <eoq-stats-class-desc> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show QoS related information

eoq

Show Extended Output Queue(EOQ) related information

stats-class

Show EOQ Statistics class selection config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_eoq_stats_class

(Optional) the xml qos_eoq_stats_class configuration

eoq-stats-class-desc

(Optional) selected class description

Command Mode

- /exec

show hardware qos include ipg

show hardware qos include ipg [ module <module> ] [ __readonly__ TABLE_qos_include_ipg <module> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

include

Show inlcude config

ipg

Show whether to include IPG in Shaping/Policing config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_include_ipg

(Optional) the xml qos_include_ipg configuration

Command Mode

- /exec

show hardware qos ing-pg-hdrm-reserve

show hardware qos ing-pg-hdrm-reserve [ module <module> ] [ __readonly__ TABLE_qos_ing_pg_hdrm_reserve <module> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

ing-pg-hdrm-reserve

Show ing-pg-hdrm-reserve config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ing_pg_hdrm_reserve

(Optional) the xml qos_ing_pg_hdrm_reserve configuration

Command Mode

- /exec

show hardware qos ing-pg-no-min

show hardware qos ing-pg-no-min [ module <module> ] [ __readonly__ TABLE_qos_ing_pg_no_min <module> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

ing-pg-no-min

Show ing-pg-no-min config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ing_pg_no_min

(Optional) the xml qos_ing_pg_no_min configuration

Command Mode

- /exec

show hardware qos ing-pg-share

show hardware qos ing-pg-share [ module <module> ] [ __readonly__ TABLE_qos_ing_pg_share <module> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

ing-pg-share

Show ing-pg-share config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ing_pg_share

(Optional) the xml qos_ing_pg_share configuration

Command Mode

- /exec

show hardware qos min-buffer

show hardware qos min-buffer [ module <module> ] [ __readonly__ TABLE_qos_min_buffer_profile <module> <buff-prof-desc> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

min-buffer

Show min-buffer config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_min_buffer_profile

(Optional) the xml qos_min_buffer_profile configuration

buff-prof-desc

(Optional) buffer profile description

Command Mode

- /exec

show hardware qos ns-buffer-profile

show hardware qos ns-buffer-profile [ module <module> ] [ __readonly__ TABLE_qos_ns_buffer_profile <module> <buff-prof-desc> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

ns-buffer-profile

Show ns-buffer-profile config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ns_buffer_profile

(Optional) the xml qos_ns_buffer_profile configuration

buff-prof-desc

(Optional) buffer profile description

Command Mode

- /exec

show hardware qos ns-mcq3-alias

show hardware qos ns-mcq3-alias [ module <module> ] [ __readonly__ TABLE_qos_ns_mcq3_alias <module> <ns-mcq3-alias-desc> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show QoS related information

ns-mcq3-alias

Show NS mc-queue-3 alias class selection config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ns_mcq3_alias

(Optional) the xml qos_ns_mcq3_alias configuration

ns-mcq3-alias-desc

(Optional) selected class description

Command Mode

- /exec

show hardware rate-limiter

show hardware rate-limiter [ module <module> ] [ layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 <l2-opts> | <opts> | f1 <f1-opts> | span-egress | urpf-fail ] [ __readonly__ TABLE_hardware_rate_limiter <rate-limit-class> <class-descr> <module> <rate-limit-configured> [ <rate-limit-allowed> ] [ <rate-limit-dropped> ] [ <rate-limit-total> ] ]

Syntax Description

show

Show running system information

hardware

Show hardware information

rate-limiter

Show Rate-Limiter configs and statistics

layer-3

(Optional) Layer-3 control and Routed packets

l3-opts

(Optional)

multicast

(Optional) Multicast data packets

mcast-opts

(Optional)

layer-2

(Optional) Layer-2 control and Bridged packets

l2-opts

(Optional)

opts

(Optional)

f1

(Optional) Control packets from F1 modules to supervisor

f1-opts

(Optional)

span-egress

(Optional) SPAN/ERSPAN egress packets

urpf-fail

(Optional) URPF fail packets

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_hardware_rate_limiter

(Optional) the xml Rate-Limiter configuration and statistics

rate-limit-class

(Optional) the xml rate limiter class

class-descr

(Optional) class description

module

(Optional) the xml module number

rate-limit-configured

(Optional) the xml rate-limit-configured

rate-limit-allowed

(Optional) the xml rate-limit-allowed

rate-limit-dropped

(Optional) the xml rate-limit-dropped

rate-limit-total

(Optional) the xml rate-limit-total

Command Mode

- /exec

show hardware rate-limiter

show hardware rate-limiter [ module <module> ] [ layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 <l2-opts> | <opts> | f1 <f1-opts> | span-egress | urpf-fail ] [ __readonly__ TABLE_hardware_rate_limiter <rate-limit-class> <class-descr> <module> <rate-limit-configured> [ <rate-limit-allowed> ] [ <rate-limit-dropped> ] [ <rate-limit-total> ] ]

Syntax Description

show

Show running system information

hardware

Show hardware information

rate-limiter

Show Rate-Limiter configs and statistics

layer-3

(Optional) Layer-3 control and Routed packets

l3-opts

(Optional)

multicast

(Optional) Multicast data packets

mcast-opts

(Optional)

layer-2

(Optional) Layer-2 control and Bridged packets

l2-opts

(Optional)

opts

(Optional)

f1

(Optional) Control packets from F1 modules to supervisor

f1-opts

(Optional)

span-egress

(Optional) SPAN/ERSPAN egress packets

urpf-fail

(Optional) URPF fail packets

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_hardware_rate_limiter

(Optional) the xml Rate-Limiter configuration and statistics

rate-limit-class

(Optional) the xml rate limiter class

class-descr

(Optional) class description

module

(Optional) the xml module number

rate-limit-configured

(Optional) the xml rate-limit-configured

rate-limit-allowed

(Optional) the xml rate-limit-allowed

rate-limit-dropped

(Optional) the xml rate-limit-dropped

rate-limit-total

(Optional) the xml rate-limit-total

Command Mode

- /exec

show hardware rate-limiter span-egress

show hardware rate-limiter span-egress [ __readonly__ TABLE_hardware_rate_limiter <rate-limit-class> <class-descr> <module> <rate-limit-configured> <rate-limit-allowed> <rate-limit-dropped> <rate-limit-total> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

rate-limiter

Show Rate-Limiter configs and statistics

span-egress

SPAN/ERSPAN egress packets

__readonly__

(Optional)

TABLE_hardware_rate_limiter

(Optional) the xml Rate-Limiter configuration and statistics

rate-limit-class

(Optional) the xml rate limiter class

class-descr

(Optional) class description

module

(Optional) the xml module number

rate-limit-configured

(Optional) the xml rate-limit-configured

rate-limit-allowed

(Optional) the xml rate-limit-allowed

rate-limit-dropped

(Optional) the xml rate-limit-dropped

rate-limit-total

(Optional) the xml rate-limit-total

Command Mode

- /exec

show hardware rl snmp class-id

show hardware rl snmp class-id <class-id> [ __readonly__ TABLE-classRateLimiterTable <class-id-out> <class-descr> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

rl

Show Rate-Limiter configs and statistics

snmp

Show Rate-Limiter snmp information

class-id

rate-limiter class-id

class-id

rate-limiter class

__readonly__

(Optional)

TABLE-classRateLimiterTable

(Optional) Class Rate Limiter Table

class-id-out

(Optional) class if out

class-descr

(Optional) class description

Command Mode

- /exec

show hardware rl snmp global class-id

show hardware rl snmp global class-id <class-id> [ __readonly__ TABLE-globalRateLimiterTable <class-id-out> <rate-limit-configured> <rate-limit-allowed> <rate-limit-dropped> <rate-limit-total> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

rl

Show Rate-Limiter configs and statistics

snmp

Show Rate-Limiter snmp information

global

Show Global information

class-id

rate-limiter class-id

class-id

rate-limiter class

__readonly__

(Optional)

TABLE-globalRateLimiterTable

(Optional) Global Rate Limiter Table

class-id-out

(Optional) class if out

rate-limit-configured

(Optional) rate-limit-configured

rate-limit-allowed

(Optional) rate-limit-allowed

rate-limit-dropped

(Optional) rate-limit-dropped

rate-limit-total

(Optional) rate-limit-total

Command Mode

- /exec

show hardware rl snmp local snmp-index class-id

show hardware rl snmp local snmp-index <snmp-index> class-id <class-id> [ __readonly__ TABLE-localRateLimiterTable <snmp-index-out> <class-id-out> <rate-limit-configured> <rate-limit-configured-source> <rate-limit-allowed> <rate-limit-dropped> <rate-limit-total> ]

Syntax Description

show

Show running system information

hardware

Show hardware information

rl

Show Rate-Limiter configs and statistics

snmp

Show Rate-Limiter snmp information

local

Show Local information

snmp-index

snmp physical index

snmp-index

physical index

class-id

rate-limiter class-id

class-id

rate-limiter class

__readonly__

(Optional)

TABLE-localRateLimiterTable

(Optional) Local Rate Limiter Table

snmp-index-out

(Optional) snmp index out

class-id-out

(Optional) class if out

rate-limit-configured

(Optional) rate-limit-configured

rate-limit-configured-source

(Optional) rate-limit-configured-source

rate-limit-allowed

(Optional) rate-limit-allowed

rate-limit-dropped

(Optional) rate-limit-dropped

rate-limit-total

(Optional) rate-limit-total

Command Mode

- /exec

show hostname

show { hostname | switchname } [ __readonly__ { <hostname> } ]

Syntax Description

show

Show running system information

hostname

show the system's hostname

switchname

show the system's hostname

__readonly__

(Optional) Read Only

hostname

(Optional)

Command Mode

- /exec

show hosts

show hosts [ __readonly__ [ <dnslookup> ] [ <dnsnameservice> ] [ { TABLE_vrf <vrfname> [ <defaultdomains> ] [ <additionaldomainserver> ] [ <domainservers> ] [ <nameservice> ] [ <dhcpdomains> ] [ <dhcpdomainservers> ] } ] [ { TABLE_dnsconfigvrf <dnsvrfname> [ <usevrf> ] [ <token> ] [ { TABLE_dnsconfigvrfconfig <config> } ] } ] [ { TABLE_hosts <host> [ <address> ] } ] ]

Syntax Description

show

Show running system information

hosts

Show information about DNS

__readonly__

(Optional)

dnslookup

(Optional) dns lookup enable status

dnsnameservice

(Optional) name service

TABLE_vrf

(Optional) vrf domain servers

vrfname

(Optional) vrf name

defaultdomains

(Optional) default domain

additionaldomainserver

(Optional) additionaldomain

domainservers

(Optional) domain server

nameservice

(Optional) name service

dhcpdomains

(Optional) dhcp domains

dhcpdomainservers

(Optional) dhcpservers

TABLE_dnsconfigvrf

(Optional) dns config vrf

dnsvrfname

(Optional) vrfname

usevrf

(Optional) usevrf

token

(Optional) token

TABLE_dnsconfigvrfconfig

(Optional) dns config vrf config

config

(Optional) token

TABLE_hosts

(Optional) all configured dns hosts

host

(Optional) xml host information

address

(Optional) xml address information

Command Mode

- /exec

show hsrp

show hsrp [ interface <interface-id> ] [ group <group-number> ] [ active | init | learn | listen | speak | standby ] + [ all ] [ brief [ all ] | detail ] [ ipv4 | ipv6 ] [ __readonly__ <show_hsrp_start> { TABLE_grp_detail <sh_if_index> <sh_group_num> <sh_group_type> <sh_group_version> <sh_group_state> [ <sh_state_reason> ] <sh_prio> <sh_cfg_prio> <sh_fwd_lower_threshold> <sh_fwd_upper_threshold> <sh_can_forward> <sh_preempt> [ <sh_preempt_min_delay> ] [ <sh_preempt_min_delay_active> ] [ <sh_preempt_reload_delay> ] [ <sh_preempt_reload_delay_active> ] [ <sh_preempt_sync_delay> ] [ <sh_preempt_sync_delay_active> ] <sh_cur_hello> <sh_cur_hello_attr> [ <sh_cfg_hello> ] [ <sh_cfg_hello_attr> ] [ <sh_active_hello> ] <sh_cur_hold> <sh_cur_hold_attr> [ <sh_cfg_hold> ] [ <sh_cfg_hold_attr> ] [ <sh_vip> | <sh_vip_v6> ] <sh_vip_attr> <sh_num_vip_sec> { [ TABLE_grp_vip_sec <sh_vip_sec> ] } [ <sh_active_router_addr> | <sh_active_router_addr_v6> ] <sh_active_router_prio> [ <sh_active_router_timer> ] [ <sh_standby_router_addr> | <sh_standby_router_addr_v6> ] <sh_standby_router_prio> <sh_authentication_type> <sh_authentication_data> [ <sh_keystring_attr> ] [ <sh_keystring_timeout> ] [ <sh_keystring_cur_valid> ] <sh_vmac> <sh_vmac_attr> <sh_num_of_state_changes> [ <sh_last_state_change> ] <sh_num_of_total_state_changes> [ <sh_last_total_state_change> ] { [ TABLE_grp_track_obj <sh_track_obj> <sh_track_obj_state> <sh_track_obj_prio> ] } <sh_num_track_obj> <sh_ip_redund_name> <sh_ip_redund_name_attr> } <show_hsrp_end> ]

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

active

(Optional) Groups in active state

init

(Optional) Groups in init state

listen

(Optional) Groups in listen state

standby

(Optional) Groups in standby state

learn

(Optional) Groups in learn state

speak

(Optional) Groups in speak state

group

(Optional) Group number

group-number

(Optional) Group Number

all

(Optional) Include groups in disabled state

brief

(Optional) Brief output

detail

(Optional) Detailed output

ipv4

(Optional) HSRP V4 Groups

ipv6

(Optional) HSRP V6 Groups

all

(Optional) Display all VIPs

__readonly__

(Optional) Read only

show_hsrp_start

(Optional) Show hsrp start

TABLE_grp_detail

(Optional) Group table detail

sh_if_index

(Optional) Interface type and number

sh_group_num

(Optional) Group number

sh_group_state

(Optional) HSRP state

sh_state_reason

(Optional) Reason

sh_group_type

(Optional) Group type

sh_group_version

(Optional) Group version

sh_prio

(Optional) Priority

sh_cfg_prio

(Optional) Configured priority

sh_fwd_lower_threshold

(Optional) Lower threshold value

sh_fwd_upper_threshold

(Optional) Upper threhsold value

sh_can_forward

(Optional) Current forwarding status

sh_preempt

(Optional) Preemption enabled/not

sh_preempt_min_delay

(Optional) Preemption min delay

sh_preempt_min_delay_active

(Optional) Active preemption min delay

sh_preempt_reload_delay

(Optional) Preemption reload delay

sh_preempt_reload_delay_active

(Optional) Active preemption reload delay

sh_preempt_sync_delay

(Optional) Preemption sync delay

sh_preempt_sync_delay_active

(Optional) Active preemption sync delay

sh_cur_hello

(Optional) Current hello time

sh_cur_hello_attr

(Optional) Hello time in ms/not

sh_cfg_hello

(Optional) Configured hello time

sh_cfg_hello_attr

(Optional) Hello time in ms/not

sh_active_hello

(Optional) Active hello time

sh_cur_hold

(Optional) Current hold time

sh_cur_hold_attr

(Optional) Hello time in ms/not

sh_cfg_hold

(Optional) Configured hold time

sh_cfg_hold_attr

(Optional) Hello time in ms/not

sh_vip

(Optional) Virtual IP address

sh_vip_attr

(Optional) Virtual IP address attribute

sh_num_vip_sec

(Optional) Number of Secondary virtual IP address

TABLE_grp_vip_sec

(Optional) Group secondary ip address

sh_vip_sec

(Optional) Secondary virtual IP address

sh_active_router_addr

(Optional) Active router address

sh_active_router_prio

(Optional) Active router priority

sh_active_router_timer

(Optional) Active router expiry timer

sh_standby_router_addr

(Optional) Standby router address

sh_standby_router_prio

(Optional) Standby router priority

sh_authentication_type

(Optional) Authentication type

sh_authentication_data

(Optional) Authentication data

sh_keystring_attr

(Optional) Keystring attribute

sh_keystring_timeout

(Optional) Keystring timeout

sh_keystring_cur_valid

(Optional) Keystring current valid time

sh_vmac

(Optional) Virtual MAC

sh_vmac_attr

(Optional) Virtual MAC attribute

sh_num_of_state_changes

(Optional) Number of state changes

sh_last_state_change

(Optional) Last state change time

sh_num_of_total_state_changes

(Optional) Number of total state changes

sh_last_total_state_change

(Optional) Last total state change time

sh_num_track_obj

(Optional) Number of tracked objects

TABLE_grp_track_obj

(Optional) Group tracked objects

sh_track_obj

(Optional) Tracked object

sh_track_obj_state

(Optional) State of tracked object

sh_track_obj_prio

(Optional) Tracked object priority decrement

sh_ip_redund_name

(Optional) IP redundancy name

sh_ip_redund_name_attr

(Optional) IP redundancy name attribute

show_hsrp_end

(Optional) End of Group

Command Mode

- /exec

show hsrp anycast

show hsrp anycast [ <id> { ipv4 | ipv6 | both } ] [ brief ]

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

id

(Optional) Bundle number

ipv4

(Optional) Associate IP Version 4 for the bundle

ipv6

(Optional) Associate IP Version 6 for the bundle

both

(Optional) Associate IP Version 4 and 6 for the bundle

brief

(Optional) Brief output

Command Mode

- /exec

show hsrp anycast interface vlan

show hsrp anycast interface { vlan | bdi } <id>

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

interface

Bundle on this interface Interface

vlan

VLAN interface

bdi

Bridge-Domain interface

id

VLAN number

Command Mode

- /exec

show hsrp anycast remote-db

show hsrp anycast remote-db [ <id> { ipv4 | ipv6 | both } ]

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

remote-db

Remote data base for the bundle

id

(Optional) Bundle number

ipv4

(Optional) Associate IP Version 4 for the bundle

ipv6

(Optional) Associate IP Version 6 for the bundle

both

(Optional) Associate IP Version 4 and 6 for the bundle

Command Mode

- /exec

show hsrp anycast summary

show hsrp anycast summary

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

summary

Show HSRP summary

Command Mode

- /exec

show hsrp bfd-sessions

show hsrp bfd-sessions [ interface <interface-id> [ to <ipaddress> ] ]

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

bfd-sessions

BFD sessions

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

to

(Optional) To IP address

ipaddress

(Optional) Sessions to IP address

Command Mode

- /exec

show hsrp bfd-sessions

show hsrp bfd-sessions [ interface <interface-id> [ to <ipaddress> ] ] [ __readonly__ [ TABLE_bfd_sess [ <interface> ] [ <list_size> ] { [ <src_addr> ] | [ <src_addr_v6> ] } { [ <dst_addr> ] | [ <dst_addr_v6> ] } [ <ref_count> ] { [ TABLE_ref_groups [ <ref_group_id> ] ] } { [ TABLE_hist_groups [ <hist_group_id> ] [ <hist_operation> ] [ <hist_rel_time> ] [ <hist_abs_time> ] [ <hist_ref_count> ] [ <hist_group_state> ] [ <hist_status> ] [ <hist_op_reason> ] ] } ] ]

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

bfd-sessions

BFD sessions

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

to

(Optional) To IP address

ipaddress

(Optional) Sessions to IP address

__readonly__

(Optional)

TABLE_bfd_sess

(Optional)

interface

(Optional) Interface

list_size

(Optional) List size

src_addr

(Optional) IPv4 Source address

dst_addr

(Optional) IPv4 Destination address

ref_count

(Optional) Ref count

TABLE_ref_groups

(Optional)

ref_group_id

(Optional) Group id

TABLE_hist_groups

(Optional)

hist_group_id

(Optional) Group id

hist_operation

(Optional) Operation

hist_rel_time

(Optional) Relative time

hist_abs_time

(Optional) Absolute time

hist_ref_count

(Optional) Ref count

hist_group_state

(Optional) Group state

hist_status

(Optional) Status

hist_op_reason

(Optional) Op reason

Command Mode

- /exec

show hsrp delay

show hsrp delay [ interface <interface-id> ] [ __readonly__ TABLE_delay <interface> <min_delay> <reload_delay> ]

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

delay

Group initialisation delay

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

__readonly__

(Optional)

TABLE_delay

(Optional)

interface

(Optional) Interface

min_delay

(Optional) Min delay

reload_delay

(Optional) Reload delay

Command Mode

- /exec

show hsrp ext-mib sec-addr

show hsrp ext-mib sec-addr [ <ifindex-in> <group-id-in> <ip1-in> <ip2-in> <ip3-in> <ip4-in> ] [ __readonly__ TABLE_cHsrpExtSecAddrTable <ifindex-out> <group-id-out> <ip1-out> <ip2-out> <ip3-out> <ip4-out> { <cHsrpExtSecAddrTable> <cHsrpExtSecAddrAddress> <cHsrpExtSecAddrRowStatus> } ]

Syntax Description

__readonly__

(Optional) Read Only

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

ext-mib

Show hsrp extended mib specific configuration

sec-addr

Secondary virtual address

ifindex-in

(Optional) hsrp group ifindex

group-id-in

(Optional) hsrp group id

group-id-out

(Optional) hsrp group num

ifindex-out

(Optional) hsrp group interface index

ip1-in

(Optional) first part of vip

ip2-in

(Optional) second part of vip

ip3-in

(Optional) third part of vip

ip4-in

(Optional) fourth part of vip

ip1-out

(Optional) first part of vip out

ip2-out

(Optional) second part of vip out

ip3-out

(Optional) third part of vip out

ip4-out

(Optional) fourth part of vip out

TABLE_cHsrpExtSecAddrTable

(Optional) Hsrp extended mib secondary address table

cHsrpExtSecAddrTable

(Optional) Hsrp extended mib Secondary address table

cHsrpExtSecAddrAddress

(Optional) Hsrp extended mib Secondary Address

cHsrpExtSecAddrRowStatus

(Optional) Hsrp extended mib secondary address row status

Command Mode

- /exec

show hsrp ext-mib use-bia

show hsrp ext-mib use-bia [ <ifindex-in> ] [ __readonly__ TABLE_cHsrpExtIfEntry <ifindex-out> { <cHsrpExtIfUseBIA> <cHsrpExtIfRowStatus> } ]

Syntax Description

__readonly__

(Optional) Read Only

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

ext-mib

Show hsrp extended mib specific configuration

use-bia

Use BIA

ifindex-in

(Optional) hsrp group ifindex

ifindex-out

(Optional) hsrp group ifindex

TABLE_cHsrpExtIfEntry

(Optional) Use BIA info table

cHsrpExtIfUseBIA

(Optional) Use BIA enabled

cHsrpExtIfRowStatus

(Optional) Use BIA row status

Command Mode

- /exec

show hsrp mgo

show hsrp mgo [ name <name> | brief ] [ __readonly__ TABLE_hsrp_mgo <master_name> <master_interface> <master_address_family> <master_group_id> [ <master_version> ] <master_state> [ <master_down_reason> ] [ { TABLE_slave <slave_interface> <slave_group_id> <slave_state> [ <slave_down_reason> ] } ] [ <num_slave_group> ] ]

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

mgo

Show HSRP mgo details

name

(Optional) Redundancy name string

name

(Optional) name string

brief

(Optional) show HSPR mgo brief

__readonly__

(Optional)

TABLE_hsrp_mgo

(Optional)

master_name

(Optional) HSRP master name

master_interface

(Optional) HSRP master interface

master_address_family

(Optional) HSRP master AF

master_group_id

(Optional) HSRP master group ID

master_version

(Optional) HSRP master version

master_state

(Optional) HSRP master state

master_down_reason

(Optional) HSRP master down reason

TABLE_slave

(Optional) Slave table

slave_interface

(Optional) HSRP slave interface

slave_group_id

(Optional) HSRP slave group id

slave_state

(Optional) HSRP slave state

slave_down_reason

(Optional) HSRP slave down reason

num_slave_group

(Optional) HSRP number of slave groups

Command Mode

- /exec

show hsrp summary

show hsrp summary [ __readonly__ <switchover_notify_rxed> <bfd_enabled> <num_of_groups> <num_of_v4_v1_groups> <num_of_v4_v2_groups> <num_of_v6_v2_groups> <num_of_active_groups> <num_of_standby_groups> <num_of_listen_groups> <num_of_v6_active_groups> <num_of_v6_standby_groups> <num_of_v6_listen_groups> <num_of_hsrp_enabled_ifs> <counter_pkts_tx> <counter_pkts_tx_failure> <counter_pkts_in> <counter_pkts_bad_vr> <counter_mts_rx> ]

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

summary

Show HSRP summary

__readonly__

(Optional)

switchover_notify_rxed

(Optional) Switchover notification received (1 => active)

bfd_enabled

(Optional) BFD status

num_of_groups

(Optional) Total number of groups

num_of_v4_v1_groups

(Optional) Number of IPv4 V1 groups

num_of_v4_v2_groups

(Optional) Number of IPv4 V2 groups

num_of_v6_v2_groups

(Optional) Number of IPv6 V2 groups

num_of_active_groups

(Optional) Number of active groups

num_of_standby_groups

(Optional) Number of standby groups

num_of_listen_groups

(Optional) Number of listen groups

num_of_v6_active_groups

(Optional) Number of IPv6 active groups

num_of_v6_standby_groups

(Optional) Number of IPv6 standby groups

num_of_v6_listen_groups

(Optional) Number of IPv6 listen groups

num_of_hsrp_enabled_ifs

(Optional) Number of HSRP enabled interfaces

counter_pkts_tx

(Optional) Number of packet transmission successes

counter_pkts_tx_failure

(Optional) Number of packet transmission failure

counter_pkts_in

(Optional) Number of packets received successfully

counter_pkts_bad_vr

(Optional) Number of packets for unknown groups

counter_mts_rx

(Optional) Number of MTS messages received

Command Mode

- /exec

Chapter 10. I Show Commands

- show icam entries acl module inst

- show icam entries multicast module

- show icam prediction entries acl module inst

- show icam prediction entries multicast module

- show icam prediction resource acl_tcam module inst

- show icam prediction scale

- show icam resource acl_tcam module inst

- show icam scale

- show ieth-header-decode

- show imp client

- show imp client sa

- show inband-telemetry exporter

- show inband-telemetry flow-profile

- show inband-telemetry monitor

- show inband-telemetry queue-profile

- show inband-telemetry record

- show inband-telemetry sessions

- show inband-telemetry watchlist

- show incompatibility-all system

- show incompatibility system

- show install

- show install all failed-standby

- show install all failure-reason

- show install all impact

- show install all impact epld

- show install all status

- show install all time-stats

- show install epld status

- show install impact

- show install impact

- show install impact detail

- show install log

- show install mode

- show install packages

- show install patches

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface aggregate-counters

- show interface aggregate-counters

- show interface aggregate-counters

- show interface bbcredit

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface cable-diagnostics-tdr

- show interface capabilities

- show interface capabilities

- show interface capabilities

- show interface counters

- show interface counters

- show interface counters

- show interface counters

- show interface counters

- show interface counters

- show interface counters

- show interface counters brief

- show interface counters brief

- show interface counters detailed

- show interface counters detailed

- show interface counters detailed

- show interface counters detailed

- show interface counters detailed all

- show interface counters detailed all

- show interface counters detailed all

- show interface counters detailed all

- show interface counters detailed all

- show interface counters detailed cached

- show interface counters details

- show interface counters details

- show interface counters errors

- show interface counters errors

- show interface counters errors

- show interface counters snmp

- show interface counters storm-control

- show interface counters storm-control

- show interface counters table

- show interface counters trunk

- show interface dampening

- show interface debounce

- show interface debounce

- show interface description

- show interface description

- show interface description

- show interface description

- show interface description

- show interface description

- show interface description

- show interface description

- show interface detail-counters

- show interface fcoe

- show interface fec

- show interface flowcontrol

- show interface flowcontrol

- show interface hardware-mappings

- show interface mac-address

- show interface mac-address

- show interface priority-flow-control

- show interface private-vlan mapping

- show interface pruning

- show interface snmp-ifindex

- show interface status

- show interface status

- show interface status

- show interface status

- show interface status

- show interface status

- show interface status

- show interface status err-disabled

- show interface status err-disabled

- show interface status err-vlans

- show interface status err-vlans

- show interface switchport

- show interface switchport

- show interface switchport backup

- show interface transceiver

- show interface transceiver

- show interface transceiver

- show interface transceiver fex-fabric

- show interface transceiver fex-fabric

- show interface transceiver inventory

- show interface trunk

- show interface trunk

- show interface trunk vsan

- show interface trunk vsan

- show interface trunk vsan

- show interface untagged-cos

- show interface vlan mapping

- show inventory

- show ip adjacency

- show ip amt relay

- show ip amt route

- show ip amt tunnel

- show ip arp

- show ip arp anycast topo-info

- show ip arp client

- show ip arp controller-statistics

- show ip arp esi

- show ip arp inspection

- show ip arp inspection interfaces

- show ip arp inspection log

- show ip arp inspection statistics

- show ip arp inspection vlan

- show ip arp multihoming-statistics

- show ip arp off-list

- show ip arp open-flow error-statistics

- show ip arp statistics

- show ip arp suppression-cache

- show ip arp suppression topo-info

- show ip arp tunnel-statistics

- show ip arp vpc-statistics

- show ip as-path-access-list

- show ip cache

- show ip client

- show ip community-list

- show ip debug

- show ip dhcp global statistics

- show ip dhcp option82 suboption info interface

- show ip dhcp relay

- show ip dhcp relay address

- show ip dhcp relay information trusted-sources

- show ip dhcp relay statistics

- show ip dhcp snooping

- show ip dhcp snooping binding

- show ip dhcp snooping statistics

- show ip dhcp status

- show ip dns source-interface

- show ip dns source-interface vrf all

- show ip eigrp

- show ip eigrp accounting

- show ip eigrp event-history

- show ip eigrp event-history bfd

- show ip eigrp event

- show ip eigrp interfaces

- show ip eigrp metric

- show ip eigrp neighbors

- show ip eigrp route-map statistics

- show ip eigrp sia-event

- show ip eigrp sia-statistics

- show ip eigrp timers

- show ip eigrp traffic

- show ip extcommunity-list

- show ip fib adjacency

- show ip fib distribution

- show ip fib distribution capture

- show ip fib distribution clients

- show ip fib distribution mroute

- show ip fib distribution multicast

- show ip fib distribution multicast outgoing-interface-list

- show ip fib distribution state

- show ip fib interfaces

- show ip fib mroute

- show ip fib mroute

- show ip fib mroute txlist

- show ip fib route

- show ip fib route

- show ip fib route recovered

- show ip ftm statistics

- show ip ftp source-interface

- show ip ftp source-interface vrf all

- show ip http source-interface

- show ip http source-interface vrf all

- show ip igmp event-history

- show ip igmp groups

- show ip igmp interface

- show ip igmp local-groups

- show ip igmp policy statistics reports

- show ip igmp snooping

- show ip igmp snooping event-history

- show ip igmp snooping explicit-tracking

- show ip igmp snooping filter details

- show ip igmp snooping groups

- show ip igmp snooping lookup-mode

- show ip igmp snooping mac-oif

- show ip igmp snooping mrouter

- show ip igmp snooping pw vlan brief

- show ip igmp snooping querier

- show ip igmp snooping report statistics

- show ip igmp snooping snmp mib adminMode

- show ip igmp snooping snmp mib aliasingMode

- show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus

- show ip igmp snooping snmp mib explicitTrackingTable

- show ip igmp snooping snmp mib fallBackTime

- show ip igmp snooping snmp mib fastBlockEnabled

- show ip igmp snooping snmp mib fastleaveenabled

- show ip igmp snooping snmp mib filterStatsTable

- show ip igmp snooping snmp mib ifAccessGroupTable

- show ip igmp snooping snmp mib ifConfigTable

- show ip igmp snooping snmp mib ifLimitTable

- show ip igmp snooping snmp mib ifLimitTotalTable

- show ip igmp snooping snmp mib igmpsnoopingenabled

- show ip igmp snooping snmp mib iterfaceStatsTable

- show ip igmp snooping snmp mib lastMemeberQueryCount

- show ip igmp snooping snmp mib lastMemeberQueryInterval

- show ip igmp snooping snmp mib leaveQueryType

- show ip igmp snooping snmp mib mcastGroupTable

- show ip igmp snooping snmp mib mcastRouterCfgTable

- show ip igmp snooping snmp mib mcastRouterConfigTable

- show ip igmp snooping snmp mib multicastGroupConfigTable

- show ip igmp snooping snmp mib multicastGroupPortListTable

- show ip igmp snooping snmp mib multicastGroupTable

- show ip igmp snooping snmp mib operMode

- show ip igmp snooping snmp mib querierTable

- show ip igmp snooping snmp mib reportsuppressionenabled

- show ip igmp snooping snmp mib robustnessVariable

- show ip igmp snooping snmp mib routerAlertCheckEnabled

- show ip igmp snooping snmp mib sourceOnlyEntryAgingTime

- show ip igmp snooping snmp mib sourceOnlyLearningEnabled

- show ip igmp snooping snmp mib tcnFloodQueryCount

- show ip igmp snooping snmp mib timeToLiveCheckEnabled

- show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled

- show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus

- show ip igmp snooping snmp mib v3SnoopingSupport

- show ip igmp snooping snmp mib vlanFilterConfigTable

- show ip igmp snooping snmp mib vlanconfigtable

- show ip igmp snooping statistics

- show ip igmp vrf all

- show ip interface

- show ip load-sharing

- show ip local-pt

- show ip local policy

- show ip logging

- show ip mbgp

- show ip mbgp

- show ip mbgp community

- show ip mbgp dampening

- show ip mbgp extcommunity

- show ip mbgp flap-statistics

- show ip mbgp neighbors

- show ip mbgp nexthop-database

- show ip mbgp nexthop

- show ip mbgp prefix-list

- show ip mbgp received-paths

- show ip mroute

- show ip msdp count

- show ip msdp event-history

- show ip msdp mesh-group

- show ip msdp peer

- show ip msdp policy statistics sa-policy in

- show ip msdp rpf

- show ip msdp sa

- show ip msdp sources

- show ip msdp statistics

- show ip msdp summary

- show ip multicast vrf

- show ip nat-alias

- show ip nat max

- show ip nat statistics

- show ip nat timeout

- show ip nat translations

- show ip ospf

- show ip ospf border-routers

- show ip ospf database

- show ip ospf database database-summary

- show ip ospf database detail

- show ip ospf event-history

- show ip ospf event-history detail

- show ip ospf ha

- show ip ospf interface

- show ip ospf interface brief

- show ip ospf lsa-content-changed-list

- show ip ospf memory

- show ip ospf neighbors

- show ip ospf neighbors detail

- show ip ospf neighbors summary

- show ip ospf policy statistics

- show ip ospf request-list

- show ip ospf retransmission-list

- show ip ospf route

- show ip ospf route summary

- show ip ospf segment-routing global-block

- show ip ospf segment-routing sid-database

- show ip ospf sham-links

- show ip ospf statistics

- show ip ospf summary-address

- show ip ospf traffic

- show ip ospf traps-queue

- show ip ospf virtual-links

- show ip ospf virtual-links brief

- show ip overlay-traffic

- show ip pim bitfield

- show ip pim config-sanity

- show ip pim df

- show ip pim event-history

- show ip pim fabric info

- show ip pim fabric legacy-vlans

- show ip pim group-range

- show ip pim host-proxy

- show ip pim interface

- show ip pim mdt

- show ip pim mdt bgp

- show ip pim mdt history interval

- show ip pim mdt receive

- show ip pim mdt send

- show ip pim neighbor

- show ip pim oif-list

- show ip pim policy statistics

- show ip pim policy statistics jp

- show ip pim route

- show ip pim rp-hash

- show ip pim rp

- show ip pim statistics

- show ip pim vrf

- show ip ping source-interface

- show ip ping source-interface vrf all

- show ip policy

- show ip prefix-list

- show ip process

- show ip rip

- show ip rip interface

- show ip rip memory

- show ip rip neighbor

- show ip rip policy statistics redistribute

- show ip rip route

- show ip rip statistics

- show ip route

- show ip router-id

- show ip sla application

- show ip sla configuration

- show ip sla enhanced-history collection-statistics

- show ip sla enhanced-history distribution-statistics

- show ip sla group schedule

- show ip sla history

- show ip sla reaction-configuration

- show ip sla reaction-trigger

- show ip sla responder

- show ip sla statistics

- show ip sla twamp connection detail

- show ip sla twamp connection requests

- show ip sla twamp session

- show ip sla twamp standards

- show ip ssh source-interface

- show ip ssh source-interface vrf all

- show ip static-route

- show ip stats

- show ip tcp mss

- show ip telnet source-interface

- show ip telnet source-interface vrf all

- show ip tftp source-interface

- show ip tftp source-interface vrf all

- show ip traceroute source-interface

- show ip traceroute source-interface vrf all

- show ip traffic

- show ip txlist list

- show ip udp relay

- show ip udp relay interface

- show ip udp relay object-group

- show ip verify source

- show ipv6 adjacency

- show ipv6 amt tunnel

- show ipv6 bgp

- show ipv6 bgp

- show ipv6 bgp

- show ipv6 bgp community

- show ipv6 bgp dampening

- show ipv6 bgp extcommunity

- show ipv6 bgp flap-statistics

- show ipv6 bgp neighbors

- show ipv6 bgp nexthop-database

- show ipv6 bgp nexthop

- show ipv6 bgp received-paths

- show ipv6 bgp regexp

- show ipv6 bgp summary

- show ipv6 cache

- show ipv6 client

- show ipv6 dhcp-ldra

- show ipv6 dhcp-ldra statistics

- show ipv6 dhcp guard policy

- show ipv6 dhcp relay

- show ipv6 dhcp relay statistics

- show ipv6 eigrp route-map statistics

- show ipv6 fragments

- show ipv6 icmp

- show ipv6 icmp global traffic

- show ipv6 icmp interface

- show ipv6 icmp ndp

- show ipv6 icmp off-list

- show ipv6 icmp process sdb

- show ipv6 icmp vaddr

- show ipv6 icmp vpc-statistics

- show ipv6 interface

- show ipv6 interface global

- show ipv6 local-pt

- show ipv6 local policy

- show ipv6 mld groups

- show ipv6 mld local-groups

- show ipv6 mld vrf all

- show ipv6 mroute

- show ipv6 mtu

- show ipv6 multicast vrf

- show ipv6 nd ra dns search-list

- show ipv6 nd ra dns server

- show ipv6 nd raguard policy

- show ipv6 nd rt-pref global pt

- show ipv6 ndp

- show ipv6 neighbor binding

- show ipv6 neighbor binding mac

- show ipv6 neighbor static

- show ipv6 pim bitfield

- show ipv6 pim df

- show ipv6 pim embed-rp

- show ipv6 pim event-history

- show ipv6 pim fabric info

- show ipv6 pim fabric legacy-vlans

- show ipv6 pim group-range

- show ipv6 pim interface show ipv6 pim interface

- show ipv6 pim neighbor

- show ipv6 pim oif-list

- show ipv6 pim policy statistics jp

- show ipv6 pim route

- show ipv6 pim rp-hash

- show ipv6 pim rp

- show ipv6 pim statistics

- show ipv6 pim vrf

- show ipv6 policy

- show ipv6 prefix-list

- show ipv6 process

- show ipv6 process sdb

- show ipv6 raguard statistics

- show ipv6 rip policy statistics redistribute

- show ipv6 route

- show ipv6 routers

- show ipv6 snooping capture-policy

- show ipv6 snooping counters vlan

- show ipv6 snooping events

- show ipv6 snooping features

- show ipv6 snooping messages

- show ipv6 snooping policies

- show ipv6 snooping policy

- show ipv6 snooping pss database

- show ipv6 static-route

- show ipv6 statistics

- show ipv6 traffic

- show isis

- show isis adjacency

- show isis csnp

- show isis database

- show isis distribute-ls

- show isis event-history

- show isis hostname

- show isis interface

- show isis ipv6 redistribute route

- show isis ipv6 route-map statistics

- show isis ipv6 route

- show isis ipv6 summary-address

- show isis lslib

- show isis lsp free-list

- show isis mesh-group

- show isis non tlv overflow-list

- show isis redistribute route

- show isis route-map statistics

- show isis route

- show isis route is

- show isis rrm

- show isis segment-routing local-mapcache

- show isis segment-routing mapcache

- show isis segment-routing remote-srgb

- show isis segment-routing sids

- show isis spf-adjacency

- show isis spf-log

- show isis srm

- show isis ssn

- show isis statistics

- show isis summary-address

- show isis topology

- show isis traffic

- show itd

- show itd

- show itd session device-group

- show itd statistics

- show itd vrf

show icam entries acl module inst

show icam entries acl module <module> inst <inst> [ history <num_intervals> ] [ sort { top <top_x> | sort-order { ascending | descending } | filter <f_f> [ exact ] | top <top_x> sort-order { ascending | descending } | top <top_x> filter <f_f> [ exact ] | top <top_x> sort-order { ascending | descending } filter <f_f> [ exact ] | top <top_x> filter <f_f> [ exact ] sort-order { ascending | descending } | sort-order { ascending | descending } top <top_x> | sort-order { ascending | descending } filter <f_f> [ exact ] | sort-order { ascending | descending } filter <f_f> [ exact ] top <top_x> | sort-order { ascending | descending } top <top_x> filter <f_f> [ exact ] | filter <f_f> [ exact ] top <top_x> | filter <f_f> [ exact ] sort-order { ascending | descending } | filter <f_f> [ exact ] top <top_x> sort-order { ascending | descending } | filter <f_f> [ exact ] sort-order { ascending | descending } top <top_x> } ] [ __readonly__ <module> <instance> [ <num_intervals> ] [ { TABLE_ACL_entries <Feature> <Pkt_Type> <SourceIP_Mask_DestIP_Mask> <Action> <Intf_name> <Stats> [ <Rate> ] } ] ]

Syntax Description

show

Show running system information

icam

intelligent CAM

entries

TCAM Entries with result and stats

acl

ACL entries

module

Module Number

module

Enter Module Number

inst

ASIC/Forwarding Engine Instance Number

inst

Enter Instance Number

sort

(Optional) Sorted display

top

(Optional) Show top x% entries (Default:100%)

top_x

(Optional) x% of entries to be displayed

sort-order

(Optional) Choose the order of displaying sorted entries (Default:descending)

ascending

(Optional) Sort in Ascending order of Stats

descending

(Optional) Sort in Descending order of Stats

filter

(Optional) Feature to be filtered (Default:All)

f_f

(Optional) Enter feature to be filtered

exact

(Optional) Exact match for feature filter

history

(Optional) Show entries history

num_intervals

(Optional) Number of intervals to display

__readonly__

(Optional) Read Only

module

(Optional) Module number

instance

(Optional) Instance number

num_intervals

(Optional) Number of intervals displayed

TABLE_ACL_entries

(Optional) Table for ACL entries

Feature

(Optional) Feature name

Pkt_Type

(Optional) Packet type

SourceIP_Mask_DestIP_Mask

(Optional) IP addresses

Action

(Optional) Action

Intf_name

(Optional) Interface name

Stats

(Optional) Total stats

Rate

(Optional) Rate packets/sec

Command Mode

- /exec

show icam entries multicast module

show icam entries multicast module <module> [ history <num_intervals> ] [ sort { top <top_x> | sort-order { ascending | descending } | top <top_x> sort-order { ascending | descending } | sort-order { ascending | descending } top <top_x> } ] [ __readonly__ <module> [ <num_intervals> ] [ { TABLE_MULTICAST_entries <Vdc> <Table_Id> <Source_Mask> <Group_Mask> <Rpf> <Stats> [ <Rate> ] } ] ]

Syntax Description

show

Show running system information

icam

intelligent CAM

entries

TCAM Entries with result and stats

multicast

Multicast entries

module

Module Number

module

Enter Module Number

sort

(Optional) Sorted display

top

(Optional) Show top x% entries (Default:100%)

top_x

(Optional) x% of entries to be displayed

sort-order

(Optional) Choose the order of displaying sorted entries (Default:Descending)

ascending

(Optional) Sort in Ascending order of Stats

descending

(Optional) Sort in Descending order of Stats

history

(Optional) Show entries history

num_intervals

(Optional) Number of intervals to display

__readonly__

(Optional) Read Only

module

(Optional) Module number

num_intervals

(Optional) Number of intervals displayed

TABLE_MULTICAST_entries

(Optional) Table for Multicast entries

Vdc

(Optional) VDC id

Table_Id

(Optional) Table id

Source_Mask

(Optional) Source address

Group_Mask

(Optional) Group address

Rpf

(Optional) RPF/Ordinal

Stats

(Optional) Total stats

Rate

(Optional) Rate packets/sec

Command Mode

- /exec

show icam prediction entries acl module inst

show icam prediction entries acl module <module> inst <inst> <YYYY> <Month> <Date> <Time> [ top <top_x> ] [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_entries <Feature> <Pkt_Type> <Value_Mask> <Action> <Intf_name> <Stats> <Prediction> } ] ]

Syntax Description

show

Show running system information

icam

intelligent CAM

prediction

Machine learning prediction

entries

TCAM Entries with result and stats

acl

ACL entries

module

Module Number

module

Enter Module Number

inst

ASIC/Forwarding Engine Instance Number

inst

Enter Instance Number

YYYY

Enter year in YYYY format

Month

Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

Date

Enter day of month in dd format

Time

Enter hour, minutes, seconds as HH:MM:SS

top

(Optional) Show top x% entries (Default:1%)

top_x

(Optional) x% of entries to be displayed

__readonly__

(Optional) Read Only

module

(Optional) Module number

instance

(Optional) Instance number

TABLE_PREDICTION_ACL_entries

(Optional) Table for ACL entries prediction

Feature

(Optional) Feature name

Pkt_Type

(Optional) Packet type

Value_Mask

(Optional) Value mask

Action

(Optional) Action

Intf_name

(Optional) Interface name

Stats

(Optional) Current stats

Prediction

(Optional) Prediction

Command Mode

- /exec

show icam prediction entries multicast module

show icam prediction entries multicast module <module> <YYYY> <Month> <Date> <Time> [ top <top_x> ] [ __readonly__ <module> [ { TABLE_PREDICTION_MULTICAST_entries <Vdc> <Table_Id> <Source_Mask> <Group_Mask> <Rpf> <Stats> <Prediction> } ] ]

Syntax Description

show

Show running system information

icam

intelligent CAM

prediction

Machine learning prediction

entries

TCAM Entries with result and stats

multicast

Multicast entries

module

Module Number

module

Enter Module Number

YYYY

Enter year in YYYY format

Month

Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

Date

Enter day of month in dd format

Time

Enter hour, minutes, seconds as HH:MM:SS

top

(Optional) Show top x% entries (Default:1%)

top_x

(Optional) x% of entries to be displayed

__readonly__

(Optional) Read Only

module

(Optional) Module number

TABLE_PREDICTION_MULTICAST_entries

(Optional) Table for multicast entries prediction

Vdc

(Optional) VDC id

Table_Id

(Optional) Table id

Source_Mask

(Optional) Source address

Group_Mask

(Optional) Group address

Rpf

(Optional) RPF/Ordinal

Stats

(Optional) Current stats

Prediction

(Optional) Prediction

Command Mode

- /exec

show icam prediction resource acl_tcam module inst

show icam prediction resource { acl_tcam | fib_tcam } module <module> inst <inst> <YYYY> <Month> <Date> <Time> [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries> <Free_Entries> <Percent_Util> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used> <Free> <Percent_Util> } ] [ { TABLE_PREDICTION_FIB_tcam <Class> <Used_Entries> <Max_Entries> <Percent_Util> } ] ]

Syntax Description

show

Show running system information

icam

intelligent CAM

prediction

Machine learning prediction

resource

TCAM Resource utilization

acl_tcam

ACL TCAM resource

fib_tcam

FIB TCAM resource

module

Module Number

module

Enter Module Number

inst

ASIC/Forwarding Engine Instance Number

inst

Enter Instance Number

YYYY

Enter year in YYYY format

Month

Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

Date

Enter day of month in dd format

Time

Enter hour, minutes, seconds as HH:MM:SS

__readonly__

(Optional) Read Only

module

(Optional) Module number

instance

(Optional) Instance number

TABLE_PREDICTION_ACL_feature

(Optional) ACL Feature utilization predictions

Feature

(Optional) Feature name

Dir

(Optional) Direction

TCAM

(Optional) TCAM entry

BANK

(Optional) BANK entry

Feature_Entries

(Optional) Feature_Entries

Free_Entries

(Optional) Free_Entries

Percent_Util

(Optional) Percent_Util

mod

(Optional) Module number

inst

(Optional) Instance number

TABLE_PREDICTION_ACL_tcam

(Optional) ACL TCAM utilization predictions

Tcam_no

(Optional) Tcam number

Bank_no

(Optional) Bank number

Used

(Optional) Used

Free

(Optional) Free

Percent_Util

(Optional) Percent_Util

TABLE_PREDICTION_FIB_tcam

(Optional) FIB TCAM utilization predictions

Class

(Optional) FIB class

Used_Entries

(Optional) Used entries

Max_Entries

(Optional) Max entries

Percent_Util

(Optional) Percent_Util

Command Mode

- /exec

show icam prediction scale

show icam prediction scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } | { vxlan [ test ] } } ] <YYYY> <Month> <Date> <Time> [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] } ] } ] } ] ]

Syntax Description

show

Show running system information

icam

intelligent CAM

scale

Verified scale

prediction

Machine learning prediction

l2-switching

(Optional) Layer 2 switching

multicast-routing

(Optional) Multicast routing

unicast-routing

(Optional) Unicast routing

vxlan

(Optional) VxLAN

mac-addresses

(Optional) MAC addresses

mst-instances

(Optional) MST instances

mst-vports

(Optional) MST virtual ports

rpvst-vports

(Optional) RPVST virtual ports

rpvst-vlans

(Optional) RPVST VLANs

vlans

(Optional) VLANs

multicast-routes

(Optional) Multicast routes

igmp-groups

(Optional) IGMP groups

pim-neighbors

(Optional) PIM neighbors

outgoing-interfaces

(Optional) Outgoing interfaces

bfd-sessions

(Optional) BFD sessions

eigrp-routes

(Optional) EIGRP routes

ipv4-arp

(Optional) IPv4 ARP

ipv4-host-routes

(Optional) IPv4 host routes

ipv6-host-routes

(Optional) IPv6 host routes

ipv4-isis-routes

(Optional) IPv4 IS-IS routes

ospf-nbr

(Optional) OSPF neighbors

ospf-lsa

(Optional) OSPF LSAs

ospf-area

(Optional) OSPF Areas

ospf-vrf

(Optional) OSPF VRFs

ospf-passive-intf

(Optional) OSPF passive interfaces

test

(Optional) VxLAN test

__readonly__

(Optional) Read Only

Info_Thres

(Optional) Configured info threshold percent

Warn_Thres

(Optional) Configured warning threshold percent

Crit_Thres

(Optional) Configured critical threshold percent

TABLE_technology

(Optional) Table technology

Technology

(Optional) Technology name

TABLE_feature

(Optional) Table feature

Feature

(Optional) Feature name

Verified_Scale

(Optional) Verified scale

Config_Scale

(Optional) Configured scale

TABLE_feature_stats

(Optional) Table feature stats

Used_Entries

(Optional) Used entries

Cur_Util

(Optional) Current utilization

YYYY

Enter year in YYYY format

Month

Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

Date

Enter day of month in dd format

Time

Enter hour, minutes, seconds as HH:MM:SS

Command Mode

- /exec

show icam resource acl_tcam module inst

show icam resource { acl_tcam | fib_tcam } module <module> inst <inst> [ history <num_intervals> ] [ __readonly__ <module> <instance> [ { TABLE_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_ingress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_egress_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_egress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ <mod> <inst> { TABLE_tcam_bank_utilization <Tcam_no> <Bank_no> [ { TABLE_tcam_bank_stats <Used> <Free> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_global_configs <Atomic_Update> <Bank_Chain_Mode> <Dynamic_Bank_Mapping> <LOU_Threshold_Value> } ] [ { TABLE_fib_resource <Class> [ { TABLE_fib_stats <Used_Entries> <Max_Entries> <Percent_Util> <Timestamp> } ] } ] ]

Syntax Description

show

Show running system information

icam

intelligent CAM

resource

TCAM Resource utilization

acl_tcam

ACL TCAM resource

fib_tcam

FIB TCAM resource

module

Module Number

module

Enter Module Number

inst

ASIC/Forwarding Engine Instance Number

inst

Enter Instance Number

history

(Optional) Show resource history

num_intervals

(Optional) Number of intervals in history

__readonly__

(Optional) Read Only

module

(Optional) Module number

instance

(Optional) Instance number

TABLE_feature_resource

(Optional) Table for ingress feature resources

Feature

(Optional) Feature name

TCAM

(Optional) TCAM entry

BANK

(Optional) BANK entry

TABLE_ingress_stats

(Optional) Table for ingress feature stats

Feature_Entries

(Optional) Feature_Entries

Free_Entries

(Optional) Free_Entries

Percent_Util

(Optional) Percent_Util

Timestamp

(Optional) Timestamp

TABLE_egress_feature_resource

(Optional) Table for egress feature resources

Feature

(Optional) Feature name

TCAM

(Optional) TCAM entry

BANK

(Optional) BANK entry

TABLE_egress_stats

(Optional) Table for egress feature stats

Feature_Entries

(Optional) Feature_Entries

Free_Entries

(Optional) Free_Entries

Percent_Util

(Optional) Percent_Util

Timestamp

(Optional) Timestamp

mod

(Optional) Module number

inst

(Optional) Instance number

TABLE_tcam_bank_utilization

(Optional) Table for tcam and bank utilization

Tcam_no

(Optional) Tcam number

Bank_no

(Optional) Bank number

TABLE_tcam_bank_stats

(Optional) Table for tcam and bank stats

Used

(Optional) Used

Free

(Optional) Free

Percent_Util

(Optional) Percent_Util

Timestamp

(Optional) Timestamp

TABLE_global_configs

(Optional) TABLE_global_configs

Atomic_Update

(Optional) Atomic_Update

Bank_Chain_Mode

(Optional) Bank_Chain_Mode

Dynamic_Bank_Mapping

(Optional) Dynamic_Bank_Mapping

LOU_Threshold_Value

(Optional) LOU_Threshold_Value

TABLE_fib_resource

(Optional) Table for fib resources

Class

(Optional) FIB class

TABLE_fib_stats

(Optional) Table for fib resource stats

Used_Entries

(Optional) Used entries

Max_Entries

(Optional) Max entries

Percent_Util

(Optional) Percent_Util

Timestamp

(Optional) Timestamp

Command Mode

- /exec

show icam scale

show icam scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } | { vxlan [ test ] } } ] [ history <num_intervals> | utilization | thresholds ] [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] [ <Thres_Exceeded> <Polled_TS> ] [ <Avg_Util> ] [ <Week_Util> <Week_TS> ] [ <Peak_Util> <Peak_TS> ] [ <Info_Thres_Exceed> <Info_Thres_Exceed_TS> <Warn_Thres_Exceed> <Warn_Thres_Exceed_TS> <Crit_Thres_Exceed> <Crit_Thres_Exceed_TS> ] } ] } ] } ] ]

Syntax Description

show

Show running system information

icam

intelligent CAM

scale

Verified scale

l2-switching

(Optional) Layer 2 switching

multicast-routing

(Optional) Multicast routing

unicast-routing

(Optional) Unicast routing

vxlan

(Optional) VxLAN

mac-addresses

(Optional) MAC addresses

mst-instances

(Optional) MST instances

mst-vports

(Optional) MST virtual ports

rpvst-vports

(Optional) RPVST virtual ports

rpvst-vlans

(Optional) RPVST VLANs

vlans

(Optional) VLANs

multicast-routes

(Optional) Multicast routes

igmp-groups

(Optional) IGMP groups

pim-neighbors

(Optional) PIM neighbors

outgoing-interfaces

(Optional) Outgoing interfaces

bfd-sessions

(Optional) BFD sessions

eigrp-routes

(Optional) EIGRP routes

ipv4-arp

(Optional) IPv4 ARP

ipv4-host-routes

(Optional) IPv4 host routes

ipv6-host-routes

(Optional) IPv6 host routes

ipv4-isis-routes

(Optional) IPv4 IS-IS routes

ospf-nbr

(Optional) OSPF neighbors

ospf-lsa

(Optional) OSPF LSAs

ospf-area

(Optional) OSPF Areas

ospf-vrf

(Optional) OSPF VRFs

ospf-passive-intf

(Optional) OSPF passive interfaces

test

(Optional) VxLAN test

history

(Optional) Show scale history

num_intervals

(Optional) Number of intervals in history

utilization

(Optional) Show utilization statistics

thresholds

(Optional) Show thresholds statistics

__readonly__

(Optional) Read Only

Info_Thres

(Optional) Configured info threshold percent

Warn_Thres

(Optional) Configured warning threshold percent

Crit_Thres

(Optional) Configured critical threshold percent

TABLE_technology

(Optional) Table technology

Technology

(Optional) Technology name

TABLE_feature

(Optional) Table feature

Feature

(Optional) Feature name

Verified_Scale

(Optional) Verified scale

Config_Scale

(Optional) Configured scale

TABLE_feature_stats

(Optional) Table feature stats

Used_Entries

(Optional) Used entries

Cur_Util

(Optional) Current utilization

Thres_Exceeded

(Optional) Threshold type exceeded

Polled_TS

(Optional) Polled timestamp

Avg_Util

(Optional) Average utilization

Week_Util

(Optional) 1 week utilization

Week_TS

(Optional) 1 week peak utilization timestamp

Peak_Util

(Optional) Peak utilization

Peak_TS

(Optional) Peak utilization timestamp

Info_Thres_Exceed

(Optional) Number of times info threshold exceeded

Info_Thres_Exceed_TS

(Optional) Last info threshold exceeded timestamp

Warn_Thres_Exceed

(Optional) Number of times warning threshold exceeded

Warn_Thres_Exceed_TS

(Optional) Last warning threshold exceeded timestamp

Crit_Thres_Exceed

(Optional) Number of times critical threshold exceeded

Crit_Thres_Exceed_TS

(Optional) Last critical threshold exceeded timestamp

Command Mode

- /exec

show ieth-header-decode

show ieth-header-decode <ieth>

Syntax Description

show

Show running system information

ieth-header-decode

Show decode of ieth header

ieth

ieth header in hex (0xFF...) or string (FF..) form

Command Mode

- /exec

show imp client

show imp client

Syntax Description

show

Show running system information

imp

ipsec management process

client

Show ipsec clients name

Command Mode

- /exec

show imp client sa

show imp client sa

Syntax Description

show

Show running system information

imp

IPSec management process

client

IMP clinet

sa

Display all SAs

Command Mode

- /exec

show inband-telemetry exporter

show inband-telemetry exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> ]

Syntax Description

show

Show running system information

inband-telemetry

Show INT information

exporter

Show INT Exporter Configuration

name

(Optional) Show a specific INT Exporter

exportername

(Optional) Specify an exporter

__readonly__

(Optional)

exporter

(Optional)

description

(Optional)

dest

(Optional)

vrf

(Optional)

vrf_id

(Optional)

vrf_resolved

(Optional)

dest_udp

(Optional)

source_intf

(Optional)

source_ip

(Optional)

dscp

(Optional)

Command Mode

- /exec

show inband-telemetry flow-profile

show inband-telemetry flow-profile [ name ] [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <dscp> <age> <latency> ]

Syntax Description

show

Show running system information

inband-telemetry

Show INT information

flow-profile

Show INT flow Profile Configuration

name

(Optional) Show a specific INT flow Profile

flow-profilename

(Optional) Specify an flow Profile

__readonly__

(Optional)

flow-profile

(Optional)

description

(Optional)

dscp

(Optional)

age

(Optional)

latency

(Optional)

Command Mode

- /exec

show inband-telemetry monitor

show inband-telemetry monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]

Syntax Description

show

Show running system information

inband-telemetry

Show INT information

monitor

Show Monitor Configuration

name

(Optional) Show a specific INT Monitor

monitorname

(Optional) Specify a monitor

cache

(Optional) Flow monitor cache contents

detailed

(Optional) Show the entire cache contents

__readonly__

(Optional)

monitor

(Optional)

use_count

(Optional)

description

(Optional)

record

(Optional)

event

(Optional)

exporter

(Optional)

bucket_id

(Optional)

src_addr

(Optional)

dest_addr

(Optional)

watchlist

(Optional)

Command Mode

- /exec

show inband-telemetry queue-profile

show inband-telemetry queue-profile [ name ] [ <queue-profilename> ] [ __readonly__ <queue-profile> <description> <depth> <latency> ]

Syntax Description

show

Show running system information

inband-telemetry

Show INT information

queue-profile

Show INT Queue Profile Configuration

name

(Optional) Show a specific INT Queue Profile

queue-profilename

(Optional) Specify an Queue Profile

__readonly__

(Optional)

queue-profile

(Optional)

description

(Optional)

depth

(Optional)

latency

(Optional)

Command Mode

- /exec

show inband-telemetry record

show inband-telemetry record [ name ] [ { <recordname> } ] [ __readonly__ <record> <description> <use_count> ]

Syntax Description

show

Show running system information

inband-telemetry

Show INT information

record

Show Record Configuration

name

(Optional) Show the configuration for a specific INT Record

recordname

(Optional) Specify a record

__readonly__

(Optional)

record

(Optional)

description

(Optional)

use_count

(Optional)

Command Mode

- /exec

show inband-telemetry sessions

show inband-telemetry sessions [ <monitorname> ] [ __readonly__ <monitor> ]

Syntax Description

show

Show running system information

inband-telemetry

Show INT information

sessions

Show Session Configuration

monitorname

(Optional) Specify a monitor

__readonly__

(Optional)

monitor

(Optional)

Command Mode

- /exec

show inband-telemetry watchlist

show inband-telemetry watchlist [ name ] [ { <watchlistname> } ] [ __readonly__ <watchlist> <use_count> <description> <num_aces> <ace_seq_num> <ace_action> <ace_type> <ace_sip> <ace_sip_len> <ace_dip> <ace_dip_len> ]

Syntax Description

show

Show running system information

inband-telemetry

Show INT information

watchlist

Show watchlist Configuration

name

(Optional) Show the configuration for a specific INT Record

watchlistname

(Optional) Specify a watchlist

__readonly__

(Optional)

watchlist

(Optional)

use_count

(Optional)

description

(Optional)

num_aces

(Optional)

ace_seq_num

(Optional)

ace_action

(Optional)

ace_type

(Optional)

ace_sip

(Optional)

ace_sip_len

(Optional)

ace_dip

(Optional)

ace_dip_len

(Optional)

Command Mode

- /exec

show incompatibility-all system

show incompatibility-all { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat_all <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description

show

Show running system information

incompatibility-all

Show incompatible configurations for the entire system

system

show incompatibilities with an image

uri0

Enter image uri

nxos

show incompatibilities with an image

uri1

Enter image uri

__readonly__

(Optional)

TABLE_incompat_all

(Optional) Show incompatibility system table

Str1

(Optional)

Serv

(Optional)

Cap

(Optional)

Desc

(Optional)

Req

(Optional)

Enable

(Optional)

Dynamic

(Optional)

Command Mode

- /exec

show incompatibility system

show incompatibility { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description

show

Show running system information

incompatibility

Show incompatible configurations

system

show incompatibilities with an image

uri0

Enter image uri

nxos

show incompatibilities with an image

uri1

Enter image uri

__readonly__

(Optional)

TABLE_incompat

(Optional) Show incompatibility system table

Str1

(Optional)

Serv

(Optional)

Cap

(Optional)

Desc

(Optional)

Req

(Optional)

Enable

(Optional)

Dynamic

(Optional)

Command Mode

- /exec

show install

show install { inactive | active [ brief ] | committed } [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> ] [ TABLE_base_package_list <base_package_id> ] } ]

Syntax Description

show

Show running system information

install

Install related show commands

inactive

Inactive packages

active

Active packages

brief

(Optional) Brief

committed

Committed packages

__readonly__

(Optional)

curr_nxos_image

(Optional) NXOS image

TABLE_smu_list

(Optional)

install_smu_id

(Optional) install operation smu identifier

TABLE_package_list

(Optional)

package_id

(Optional) Package name

TABLE_base_package_list

(Optional)

base_package_id

(Optional) Base package name

Command Mode

- /exec

show install all failed-standby

show install all failed-standby [ __readonly__ { [ TABLE_installFailStandby <Str1> ] } ]

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

Show install all information

failed-standby

show log from failed standby

__readonly__

(Optional)

TABLE_installFailStandby

(Optional) Install failed-standby table

Str1

(Optional)

Command Mode

- /exec

show install all failure-reason

show install all failure-reason [ __readonly__ { [ TABLE_installFailReason <installFailReasonStr> ] } ]

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

failure-reason

Show failure reason for the last install all

__readonly__

(Optional)

TABLE_installFailReason

(Optional) Install failure-reason table

installFailReasonStr

(Optional)

Command Mode

- /exec

show install all impact

show install all impact [ nxos <uri> ] + [ non-disruptive ]

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

impact

show impact of the install all command

nxos

(Optional) boot-variable name

uri

(Optional) Enter image uri

non-disruptive

(Optional) non-disruptive show install

Command Mode

- /exec

show install all impact epld

show install all impact epld <uri1> [ __readonly__ [ { TABLE_compat <module> <type> <upgradable> <impact> <reason> } ] ]

Syntax Description

show

Show running system information

install

Show the software install status

all

show install all information

impact

show impact of the install all epld command

epld

Show EPLD install information

uri1

Local URI containing EPLD Image

__readonly__

(Optional)

TABLE_compat

(Optional)

module

(Optional)

type

(Optional)

upgradable

(Optional)

impact

(Optional)

reason

(Optional)

Command Mode

- /exec

show install all status

show install all status

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

status

show status of the current or last install all

Command Mode

- /exec

show install all time-stats

show install all time-stats [ detail | handshake ]

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

time-stats

show overall time statistics of the last install all

detail

(Optional) show detailed time statistics of the last install all

handshake

(Optional) show handshake time statistics for sysmgr and lc processes of the last install all

Command Mode

- /exec

show install epld status

show install epld status [ __readonly__ { <header_info> <entry_num> <module_num> <time> <status> <reason> <curr_ver> <old_ver> <epld_name> <epld_install_name> } ]

Syntax Description

show

Show running system information

install

Show the software install status

epld

Show EPLD install information

status

Show status of previous EPLD upgrades

__readonly__

(Optional)

header_info

(Optional)

entry_num

(Optional)

module_num

(Optional)

time

(Optional)

status

(Optional)

reason

(Optional)

curr_ver

(Optional)

old_ver

(Optional)

epld_name

(Optional)

epld_install_name

(Optional)

Command Mode

- /exec

show install impact

show install impact <uri0>

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

Command Mode

- /exec

show install impact

show install impact <uri0> <uri1>

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

uri1

Enter active URI

Command Mode

- /exec

show install impact detail

show install impact <uri0> detail

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

detail

Show detailed install impact of given system image

Command Mode

- /exec

show install log

show install log { [ <id> | from <id1> ] [ detail ] [ reverse ] | [ last ] } [ __readonly__ { current_time <curr_time> [ TABLE_show_log_output <install_id> <install_log_entry> + ] } ]

Syntax Description

show

Show running system information

install

Install related show commands

log

log

id

(Optional) Install Identifies

from

(Optional) Starting at this install identifier

id1

(Optional) Install Identifier

detail

(Optional) Detailed information including impacted processes

reverse

(Optional) Displays the logs in reverse order

last

(Optional) Display the logs for last install operation

__readonly__

(Optional)

current_time

(Optional) current time

curr_time

(Optional) current time

TABLE_show_log_output

(Optional)

install_id

(Optional) install operation id

install_log_entry

(Optional) install log entry

Command Mode

- /exec

show install mode

show install mode [ __readonly__ { <install_mode> <image_type> } ]

Syntax Description

show

Show running system information

install

Install related show commands

mode

Display mode and type of booted image

__readonly__

(Optional)

install_mode

(Optional) install mode

image_type

(Optional) image type

Command Mode

- /exec

show install packages

show install packages [ __readonly__ { <curr_nxos_image> [ TABLE_package_list <package_name> <version> <state> <signature> ] } ]

Syntax Description

show

Show running system information

install

Install related show commands

packages

All packages

__readonly__

(Optional)

curr_nxos_image

(Optional) NXOS image

TABLE_package_list

(Optional)

package_name

(Optional) Package name

version

(Optional) Package version

state

(Optional) package state

signature

(Optional) Signature

Command Mode

- /exec

show install patches

show install patches [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> <install_smu_state> [ TABLE_module_list <install_modno> <install_mod_smu_state> ] ] } ]

Syntax Description

show

Show running system information

install

Install related show commands

patches

All Patches

__readonly__

(Optional)

TABLE_smu_list

(Optional)

curr_nxos_image

(Optional) NXOS image

install_smu_id

(Optional) install operation smu identifier

install_smu_state

(Optional) install operation smu state

TABLE_module_list

(Optional)

install_modno

(Optional) install operation module number

install_mod_smu_state

(Optional) install operation module state

Command Mode

- /exec

show interface

show interface <ifmgmt> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <eth_bundle> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

share_state

(Optional) Interface ownership

eth_bundle

(Optional) Belongs to bundle

eth_dce_mode

(Optional) DCE mode description

vpc_status

(Optional) VPC status

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_encap_vlan

(Optional) Encapsulation Vlan

encapsulation

(Optional) Encapsulation

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_loopback

(Optional) Loopback

eth_keepalive

(Optional) Keepalive

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_mode

(Optional) Port mode

eth_ratemode

(Optional) Rate mode

eth_autoneg

(Optional) Autonegotiation

eth_beacon

(Optional) Beacon

eth_media

(Optional) Media type

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_clk_mode

(Optional) Clock mode

eth_arp_type

(Optional) ARP type

eth_arp_timeout

(Optional) ARP timeout

eth_last_in

(Optional) Last input

eth_last_out

(Optional) Last output

eth_out_hang

(Optional) Last output hang

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_link_flapped

(Optional) Last link flapped

eth_inq_size

(Optional) Input queue size

eth_inq_max

(Optional) Input queue max

eth_inq_drops

(Optional) Input queue drops

eth_inq_flush

(Optional) Input queue flushes

eth_out_drop

(Optional) Output drops

eth_q_strategy

(Optional) Queueing strategy

eth_outq_size

(Optional) Output queue size

eth_outq_max

(Optional) Output queue max

eth_reset_cntr

(Optional) Interface resets

mgmt_hw_desc

(Optional) HW description

mgmt_hw_addr

(Optional) HW address

mgmt_ip_addr

(Optional) IP address

mgmt_ip_mask

(Optional) IP address mask

mgmt_mtu

(Optional) MTU

mgmt_speed

(Optional) Speed

mgmt_duplex

(Optional) Duplex

vdc_lvl_in_avg_bits

(Optional) VDC level average input bits

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_out_avg_bits

(Optional) VDC level average output bits

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

Command Mode

- /exec

show interface

show interface <ifid_brief1> [ brief ] [ __readonly__ [ { TABLE_interface_vfc [ <interface_vfc> ] [ <vsan_brief> ] [ <oper_port_state> ] [ <port_state> ] [ <bound_interface> ] [ <port_desc> ] [ <port_des> ] [ <mgmt_hw_desc1> ] [ <mgmt_hw_addr1> ] [ <port_name> ] [ <hardware> ] [ <sfp> ] [ <port_wwn> ] [ <peer_port_wwn> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <snmp_trap> ] [ <status> ] [ <state_rsn1> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_mac> ] [ <bind_type> ] [ <port_mode> ] [ <fcid> ] [ <cfg_port_vsan> ] [ <vsan> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <admin_speed> ] [ <port_channel> ] [ <ip_addr1> ] [ <oper_txbbcredit> ] [ <oper_rxbbcredit> ] [ <port_bb_scn> ] [ <admin_rxbufsize> ] [ <admin_port_encap> ] [ <admin_beacon_mode> ] [ <admin_fec_state> ] [ <oper_fec_state> ] [ <bundle_if_index> ] [ <trkd_if_index> ] [ <trk_cfg_vsans> ] [ <trkd_port_state> ] [ <num_ports> ] [ TABLE_trk_intf [ <trk_intf> ] ] [ <info_type_num> ] [ <info_model_num> ] [ <info_manufacturer> ] [ <info_port_id> ] [ <active_vsan> ] [ <trunk_vsan_up> ] [ <trunk_vsan_isolated> ] [ <trunk_vsan_initializing> ] [ <in_bps> ] [ <in_byps> ] [ <in_fps> ] [ <out_bps> ] [ <out_byps> ] [ <out_fps> ] [ <total_in_frames> ] [ <total_in_bytes> ] [ <total_in_discards> ] [ <total_in_errors> ] [ <invalid_crc> ] [ <unknown_class_frames> ] [ <frames_too_long> ] [ <frames_too_short> ] [ <total_out_frames> ] [ <total_out_bytes> ] [ <total_out_discards> ] [ <total_out_errors> ] [ <in_ols> ] [ <in_lrr> ] [ <in_nos> ] [ <in_loop_inits> ] [ <out_ols> ] [ <out_lrr> ] [ <out_nos> ] [ <out_loop_inits> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] [ TABLE_members [ <port_channel_member> ] ] [ <interface_last_changed> ] [ <time_last_cleared> ] } ] [ { TABLE_interface_brief_vfc [ <interface_vfc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <bind_mac> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr> ] } ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_brief1

Enter interface type and number in module/slot format

brief

(Optional) Show brief info of interface

__readonly__

(Optional) Read Only

interface_vfc

(Optional) Interface index

TABLE_interface_vfc

(Optional) show interface

vsan_brief

(Optional) vsan for brief

oper_port_state

(Optional) oper port state

port_state

(Optional) port state

bound_interface

(Optional) bound interface

port_desc

(Optional) port description

port_des

(Optional) port description

mgmt_hw_desc1

(Optional) HW description

mgmt_hw_addr1

(Optional) HW address

port_name

(Optional) port description

hardware

(Optional) Hardware is

sfp

(Optional) sfp

port_wwn

(Optional) port wwn

peer_port_wwn

(Optional) peer port wwn

admin_mode

(Optional) admin mode

admin_trunk_mode

(Optional) admin trunk mode

snmp_trap

(Optional) snmp trap

status

(Optional) Status

state_rsn1

(Optional) state reason

fcot_info

(Optional) fcot info

bind_info

(Optional) bind interface

bind_mac

(Optional) bind mac

bind_type

(Optional) bind type

port_mode

(Optional) port mode

fcid

(Optional) fcid

cfg_port_vsan

(Optional) config port vsan

vsan

(Optional) vsan for brief

port_rate_mode

(Optional) operation port rate mode

oper_speed

(Optional) speed

admin_speed

(Optional) admin speed

port_channel

(Optional) port channel

ip_addr1

(Optional) Ip address

oper_txbbcredit

(Optional) oper tx bbcredit

oper_rxbbcredit

(Optional) oper rx bbcredit

port_bb_scn

(Optional) port bb scn

admin_rxbufsize

(Optional) admin rx bufsize

admin_port_encap

(Optional) admin port encap

admin_beacon_mode

(Optional) admin beacon mode

admin_fec_state

(Optional) admin fec state

oper_fec_state

(Optional) oper fec state

bundle_if_index

(Optional) bundle if index

trkd_if_index

(Optional) Trunk interfaces

trk_cfg_vsans

(Optional) Trunk vsans

trkd_port_state

(Optional) trunk port state

num_ports

(Optional) number of ports

TABLE_trk_intf

(Optional) trunk interfaces

trk_intf

(Optional) track interface

info_type_num

(Optional) info type num

info_model_num

(Optional) info model num

info_manufacturer

(Optional) info manufacturer

info_port_id

(Optional) info port id

active_vsan

(Optional) allowed and active vsan

trunk_vsan_up

(Optional) trunk vsan up

trunk_vsan_isolated

(Optional) trunk vsan isolated

trunk_vsan_initializing

(Optional) trunk vsan initializing

in_bps

(Optional) input bits/sec

in_byps

(Optional) input bytes/sec

in_fps

(Optional) input frames/sec

out_bps

(Optional) output bits/sec

out_byps

(Optional) output bytes/sec

out_fps

(Optional) output frames/sec

total_in_frames

(Optional) total in frames

total_in_bytes

(Optional) total in bytes

total_in_discards

(Optional) total in discards

total_in_errors

(Optional) total in errors

invalid_crc

(Optional) invalid crc

unknown_class_frames

(Optional) unknown class frames

frames_too_long

(Optional) frames too long

frames_too_short

(Optional) frames too short

total_out_frames

(Optional) total out frames

total_out_bytes

(Optional) total out bytes

total_out_discards

(Optional) total out discards

total_out_errors

(Optional) total out errors

in_ols

(Optional) input OLS

in_lrr

(Optional) input LRR

in_nos

(Optional) input NOS

in_loop_inits

(Optional) input loop inits

out_ols

(Optional) output OLS

out_lrr

(Optional) ouput LRR

out_nos

(Optional) output NOS

out_loop_inits

(Optional) output loop inits

rx_b2b_perf_buff

(Optional) rx b2b performance buff

rx_b2b_credit

(Optional) rx b2b credit

tx_b2b_credit

(Optional) tx b2b credit

tx_b2b_low_pri_cre

(Optional) tx b2b low pri credit

fcoe_in_pkts

(Optional) fcoe in pkts

fcoe_in_octets

(Optional) fcoe in octets

fcoe_out_pkts

(Optional) fcoe out pkts

fcoe_out_octets

(Optional) fcoe out octets

TABLE_members

(Optional) table for port-channel member interface

port_channel_member

(Optional) port-channel member interface

interface_last_changed

(Optional) interface last changed

time_last_cleared

(Optional) counters last cleared

TABLE_interface_brief_vfc

(Optional) show interface brief table

interface_vfc

(Optional) Interface index

vsan_brief

(Optional) vsan brief

admin_mode

(Optional) admin mode

admin_trunk_mode

(Optional) admin trunk mode

status

(Optional) status

fcot_info

(Optional) fcot info

bind_info

(Optional) bind interface

bind_type

(Optional) bind type

bind_mac

(Optional) bind mac address

port_rate_mode

(Optional) rate mode

oper_speed

(Optional) speed

port_channel

(Optional) port channel number

ip_addr

(Optional) IP address

Command Mode

- /exec

show interface

show interface <ifid_brief2> [ brief ] [ __readonly__ [ { TABLE_interface_fc [ <interface_vfc> ] [ <vsan_brief> ] [ <oper_port_state> ] [ <port_state> ] [ <bound_interface> ] [ <port_desc> ] [ <port_des> ] [ <mgmt_hw_desc1> ] [ <mgmt_hw_addr1> ] [ <port_name> ] [ <hardware> ] [ <sfp> ] [ <port_wwn> ] [ <peer_port_wwn> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <snmp_trap> ] [ <status> ] [ <state_rsn1> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_mac> ] [ <bind_type> ] [ <port_mode> ] [ <fcid> ] [ <cfg_port_vsan> ] [ <vsan> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <admin_speed> ] [ <port_channel> ] [ <ip_addr1> ] [ <oper_txbbcredit> ] [ <oper_rxbbcredit> ] [ <port_bb_scn> ] [ <admin_rxbufsize> ] [ <admin_port_encap> ] [ <admin_beacon_mode> ] [ <admin_fec_state> ] [ <oper_fec_state> ] [ <bundle_if_index> ] [ <trkd_if_index> ] [ <trk_cfg_vsans> ] [ <trkd_port_state> ] [ <num_ports> ] [ TABLE_trk_intf [ <trk_intf> ] ] [ <info_type_num> ] [ <info_model_num> ] [ <info_manufacturer> ] [ <info_port_id> ] [ <active_vsan> ] [ <trunk_vsan_up> ] [ <trunk_vsan_isolated> ] [ <trunk_vsan_initializing> ] [ <in_bps> ] [ <in_byps> ] [ <in_fps> ] [ <out_bps> ] [ <out_byps> ] [ <out_fps> ] [ <total_in_frames> ] [ <total_in_bytes> ] [ <total_in_discards> ] [ <total_in_errors> ] [ <invalid_crc> ] [ <unknown_class_frames> ] [ <frames_too_long> ] [ <frames_too_short> ] [ <total_out_frames> ] [ <total_out_bytes> ] [ <total_out_discards> ] [ <total_out_errors> ] [ <in_ols> ] [ <in_lrr> ] [ <in_nos> ] [ <in_loop_inits> ] [ <out_ols> ] [ <out_lrr> ] [ <out_nos> ] [ <out_loop_inits> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] [ TABLE_members [ <port_channel_member> ] ] [ <interface_last_changed> ] [ <time_last_cleared> ] } ] [ { TABLE_interface_brief_fc [ <interface_fc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <bind_mac> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr> ] } ] [ { TABLE_interface_brief_san_pc [ <interface_san> ] [ <vsan_brief> ] [ <admin_trunk_mode> ] [ <status> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <ip_addr> ] } ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_brief2

Enter interface type and number in module/slot format

brief

(Optional) Show brief info of interface

__readonly__

(Optional) Read Only

interface_vfc

(Optional) Interface index

TABLE_interface_fc

(Optional) show interface

vsan_brief

(Optional) vsan for brief

oper_port_state

(Optional) oper port state

port_state

(Optional) port state

bound_interface

(Optional) bound interface

port_desc

(Optional) port description

port_des

(Optional) port description

mgmt_hw_desc1

(Optional) HW description

mgmt_hw_addr1

(Optional) HW address

port_name

(Optional) port description

hardware

(Optional) Hardware is

sfp

(Optional) sfp

port_wwn

(Optional) port wwn

peer_port_wwn

(Optional) peer port wwn

admin_mode

(Optional) admin mode

admin_trunk_mode

(Optional) admin trunk mode

snmp_trap

(Optional) snmp trap

status

(Optional) Status

state_rsn1

(Optional) state reason

fcot_info

(Optional) fcot info

bind_info

(Optional) bind interface

bind_mac

(Optional) bind mac

bind_type

(Optional) bind type

port_mode

(Optional) port mode

fcid

(Optional) fcid

cfg_port_vsan

(Optional) config port vsan

vsan

(Optional) vsan for brief

port_rate_mode

(Optional) operation port rate mode

oper_speed

(Optional) speed

admin_speed

(Optional) admin speed

port_channel

(Optional) port channel

ip_addr1

(Optional) Ip address

oper_txbbcredit

(Optional) oper tx bbcredit

oper_rxbbcredit

(Optional) oper rx bbcredit

port_bb_scn

(Optional) port bb scn

admin_rxbufsize

(Optional) admin rx bufsize

admin_port_encap

(Optional) admin port encap

admin_beacon_mode

(Optional) admin beacon mode

admin_fec_state

(Optional) admin fec state

oper_fec_state

(Optional) oper fec state

bundle_if_index

(Optional) bundle if index

trkd_if_index

(Optional) Trunk interfaces

trk_cfg_vsans

(Optional) Trunk vsans

trkd_port_state

(Optional) trunk port state

num_ports

(Optional) number of ports

TABLE_trk_intf

(Optional) trunk interfaces

trk_intf

(Optional) track interface

info_type_num

(Optional) info type num

info_model_num

(Optional) info model num

info_manufacturer

(Optional) info manufacturer

info_port_id

(Optional) info port id

active_vsan

(Optional) allowed and active vsan

trunk_vsan_up

(Optional) trunk vsan up

trunk_vsan_isolated

(Optional) trunk vsan isolated

trunk_vsan_initializing

(Optional) trunk vsan initializing

in_bps

(Optional) input bits/sec

in_byps

(Optional) input bytes/sec

in_fps

(Optional) input frames/sec

out_bps

(Optional) output bits/sec

out_byps

(Optional) output bytes/sec

out_fps

(Optional) output frames/sec

total_in_frames

(Optional) total in frames

total_in_bytes

(Optional) total in bytes

total_in_discards

(Optional) total in discards

total_in_errors

(Optional) total in errors

invalid_crc

(Optional) invalid crc

unknown_class_frames

(Optional) unknown class frames

frames_too_long

(Optional) frames too long

frames_too_short

(Optional) frames too short

total_out_frames

(Optional) total out frames

total_out_bytes

(Optional) total out bytes

total_out_discards

(Optional) total out discards

total_out_errors

(Optional) total out errors

in_ols

(Optional) input OLS

in_lrr

(Optional) input LRR

in_nos

(Optional) input NOS

in_loop_inits

(Optional) input loop inits

out_ols

(Optional) output OLS

out_lrr

(Optional) ouput LRR

out_nos

(Optional) output NOS

out_loop_inits

(Optional) output loop inits

rx_b2b_perf_buff

(Optional) rx b2b performance buff

rx_b2b_credit

(Optional) rx b2b credit

tx_b2b_credit

(Optional) tx b2b credit

tx_b2b_low_pri_cre

(Optional) tx b2b low pri credit

fcoe_in_pkts

(Optional) fcoe in pkts

fcoe_in_octets

(Optional) fcoe in octets

fcoe_out_pkts

(Optional) fcoe out pkts

fcoe_out_octets

(Optional) fcoe out octets

TABLE_members

(Optional) table for port-channel member interface

port_channel_member

(Optional) port-channel member interface

interface_last_changed

(Optional) interface last changed

time_last_cleared

(Optional) counters last cleared

TABLE_interface_brief_fc

(Optional) show interface brief table

interface_fc

(Optional) Interface index

ip_addr

(Optional) IP address

vsan_brief

(Optional) vsan brief

admin_mode

(Optional) admin mode

admin_trunk_mode

(Optional) admin trunk mode

status

(Optional) status

fcot_info

(Optional) fcot info

bind_info

(Optional) bind interface

bind_type

(Optional) bind type

bind_mac

(Optional) bind mac address

port_rate_mode

(Optional) rate mode

oper_speed

(Optional) speed

port_channel

(Optional) port channel number

TABLE_interface_brief_san_pc

(Optional) show interface brief for san-po

interface_san

(Optional) san_po interface

vsan_brief

(Optional) vsan brief

admin_trunk_mode

(Optional) admin trunk mode

status

(Optional) status

port_rate_mode

(Optional) rate mode

oper_speed

(Optional) speed

ip_addr

(Optional) IP address

Command Mode

- /exec

show interface

show interface <ifid> [ quick ] [ __readonly__ TABLE_interface <interface> [ <desc> ] [ [ <svi_if_index> ] [ <svi_admin_state> ] [ <oper_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <vlan_id> ] [ <type> ] ] [ [ <svi_tx_load> ] [ <svi_rx_load> ] ] [ [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] ] [ [ <svi_time_last_cleared> ] ] [ { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } ] [ [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ] [ [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] ] [ [ <svi_reliability> ] ] [ <switchport> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid

Enter interface type and number in module/slot format

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

desc

(Optional) Interface description

svi_if_index

(Optional) Interface

svi_admin_state

(Optional)

oper_state

(Optional)

svi_rsn_desc

(Optional) Interface state reason detailed

svi_line_proto

(Optional)

svi_hw

(Optional) Hardware

svi_mac

(Optional) Address

svi_desc

(Optional) Interface Description

svi_ip_addr

(Optional) IP Address

svi_ip_mask

(Optional) IP address mask

svi_mtu

(Optional) MTU size in bytes

svi_bw

(Optional) Bandwidth in kilobits

svi_delay

(Optional) Throughput delay (tens of microseconds)

vlan_id

(Optional) Vlan

type

(Optional) type

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_carrier_delay_sec

(Optional) carrier delay value in seconds

svi_carrier_delay_msec

(Optional) carrier delay value in milli-seconds

svi_arp_type

(Optional) ARP type

svi_arp_timeout

(Optional) ARP timeout value

svi_time_last_cleared

(Optional) Time last cleared

TABLE_sec_vlan

(Optional) secondary vlans

sec_vlan

(Optional) vlan id

sec_vlan_type

(Optional) secondary vlan type

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) IPv4 L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) IPv4 L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) IPv4 L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) IPv4 L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) IPv4 L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) IPv4 L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) IPv4 L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) IPv4 L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_l3avg2_inbytes

(Optional) Load interval 2 L3 average in switched bytes

eth_l3avg2_inpkts

(Optional) Load interval 2 L3 average in switched pkts

eth_l3avg2_outbytes

(Optional) Load interval 2 L3 average out switched bytes

eth_l3avg2_outpkts

(Optional) Load interval 2 L3 average out switched pkts

eth_l3avg3_inbytes

(Optional) Load interval 3 L3 average in switched bytes

eth_l3avg3_inpkts

(Optional) Load interval 3 L3 average in switched pkts

eth_l3avg3_outbytes

(Optional) Load interval 3 L3 average out switched bytes

eth_l3avg3_outpkts

(Optional) Load interval 3 L3 average out switched pkts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_nobuf

(Optional) No buffer received

eth_inbcast

(Optional) Broadcasts

eth_inmcast

(Optional) Multicasts

eth_inucast

(Optional) Unicasts

eth_ingiants

(Optional) giants

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_runts

(Optional) runts

eth_storm_supp

(Optional) storm suppression

eth_throtles

(Optional) throttles

eth_inerr

(Optional) input errors

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_outbcast

(Optional) Broadcasts

eth_outmcast

(Optional) Multicasts

eth_outucast

(Optional) Unicasts

eth_outgiants

(Optional) giants

eth_inpause

(Optional) pause input

eth_dribble

(Optional) input packets with dribble condition

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_underrun

(Optional) underruns

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_resets

(Optional) interface resets

eth_babbles

(Optional) babbles

eth_latecoll

(Optional) late collision

eth_deferred

(Optional) deferred

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_outpause

(Optional) PAUSE output

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_sqetest

(Optional) SQE test

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

eth_eee_atx_lpi_msec

(Optional) Tx Lpi usec

eth_eee_arcv_lpi_msec

(Optional) Rx Lpi usec

eth_eee_atx_lpi_transitions

(Optional) Tx Lpi requests

eth_eee_arcv_lpi_transitions

(Optional) Rx Lpi indications

eth_phy_ber_count

(Optional) Bit error rate counter

eth_phy_errblks_count

(Optional) Errored blocks counter

svi_reliability

(Optional) Reliability

switchport

(Optional) Switchport enabled

Command Mode

- /exec

show interface

show interface [ controller | quick ] [ __readonly__ TABLE_interface <interface> [ <state> ] [ <state_rsn_desc> ] [ <state_rsn> ] [ <vsan_brief> ] [ <oper_port_state> ] [ <port_state> ] [ <bound_interface> ] [ <port_desc> ] [ <port_des> ] [ <mgmt_hw_desc1> ] [ <mgmt_hw_addr1> ] [ <port_name> ] [ <hardware> ] [ <sfp> ] [ <port_wwn> ] [ <peer_port_wwn> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <snmp_trap> ] [ <status> ] [ <state_rsn1> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_mac> ] [ <bind_type> ] [ <port_mode> ] [ <fcid> ] [ <cfg_port_vsan> ] [ <vsan> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <admin_speed> ] [ <port_channel> ] [ <ip_addr1> ] [ <oper_txbbcredit> ] [ <oper_rxbbcredit> ] [ <port_bb_scn> ] [ <admin_rxbufsize> ] [ <admin_port_encap> ] [ <admin_beacon_mode> ] [ <admin_fec_state> ] [ <oper_fec_state> ] [ <bundle_if_index> ] [ <trkd_if_index> ] [ <trk_cfg_vsans> ] [ <trkd_port_state> ] [ <num_ports> ] [ TABLE_trk_intf [ <trk_intf> ] ] [ <info_type_num> ] [ <info_model_num> ] [ <info_manufacturer> ] [ <info_port_id> ] [ <active_vsan> ] [ <trunk_vsan_up> ] [ <trunk_vsan_isolated> ] [ <trunk_vsan_initializing> ] [ <in_bps> ] [ <in_byps> ] [ <in_fps> ] [ <out_bps> ] [ <out_byps> ] [ <out_fps> ] [ <total_in_frames> ] [ <total_in_bytes> ] [ <total_in_discards> ] [ <total_in_errors> ] [ <invalid_crc> ] [ <unknown_class_frames> ] [ <frames_too_long> ] [ <frames_too_short> ] [ <total_out_frames> ] [ <total_out_bytes> ] [ <total_out_discards> ] [ <total_out_errors> ] [ <in_ols> ] [ <in_lrr> ] [ <in_nos> ] [ <in_loop_inits> ] [ <out_ols> ] [ <out_lrr> ] [ <out_nos> ] [ <out_loop_inits> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] [ TABLE_members [ <port_channel_member> ] ] [ <interface_last_changed> ] [ <time_last_cleared> ] [ <interface_quick> ] [ <vsan_brief_quick> ] [ <oper_port_state_quick> ] [ <port_state_quick> ] [ <bound_interface_quick> ] [ <port_desc_quick> ] [ <port_des_quick> ] [ <mgmt_hw_desc1_quick> ] [ <mgmt_hw_addr1_quick> ] [ <port_name_quick> ] [ <hardware_quick> ] [ <sfp_quick> ] [ <port_wwn_quick> ] [ <peer_port_wwn_quick> ] [ <admin_mode_quick> ] [ <admin_trunk_mode_quick> ] [ <snmp_trap_quick> ] [ <status_quick> ] [ <state_rsn1_quick> ] [ <fcot_info_quick> ] [ <bind_info_quick> ] [ <bind_mac_quick> ] [ <bind_type_quick> ] [ <port_mode_quick> ] [ <fcid_quick> ] [ <cfg_port_vsan_quick> ] [ <vsan_quick> ] [ <port_rate_mode_quick> ] [ <oper_speed_quick> ] [ <admin_speed_quick> ] [ <port_channel_quick> ] [ <ip_addr1_quick> ] [ <oper_txbbcredit_quick> ] [ <oper_rxbbcredit_quick> ] [ <port_bb_scn_quick> ] [ <admin_rxbufsize_quick> ] [ <admin_port_encap_quick> ] [ <admin_beacon_mode_quick> ] [ <admin_fec_state_quick> ] [ <oper_fec_state_quick> ] [ <bundle_if_index_quick> ] [ <trkd_if_index_quick> ] [ <trk_cfg_vsans_quick> ] [ <trkd_port_state_quick> ] [ <num_ports_quick> ] [ TABLE_trk_intf_quick [ <trk_intf_quick> ] ] [ <info_type_num_quick> ] [ <info_model_num_quick> ] [ <info_manufacturer_quick> ] [ <info_port_id_quick> ] [ <active_vsan_quick> ] [ <trunk_vsan_up_quick> ] [ <trunk_vsan_isolated_quick> ] [ <trunk_vsan_initializing_quick> ] [ <in_bps_quick> ] [ <in_byps_quick> ] [ <in_fps_quick> ] [ <out_bps_quick> ] [ <out_byps_quick> ] [ <out_fps_quick> ] [ <total_in_frames_quick> ] [ <total_in_bytes_quick> ] [ <total_in_discards_quick> ] [ <total_in_errors_quick> ] [ <invalid_crc_quick> ] [ <unknown_class_frames_quick> ] [ <frames_too_long_quick> ] [ <frames_too_short_quick> ] [ <total_out_frames_quick> ] [ <total_out_bytes_quick> ] [ <total_out_discards_quick> ] [ <total_out_errors_quick> ] [ <in_ols_quick> ] [ <in_lrr_quick> ] [ <in_nos_quick> ] [ <in_loop_inits_quick> ] [ <out_ols_quick> ] [ <out_lrr_quick> ] [ <out_nos_quick> ] [ <out_loop_inits_quick> ] [ <rx_b2b_perf_buff_quick> ] [ <rx_b2b_credit_quick> ] [ <tx_b2b_credit_quick> ] [ <tx_b2b_low_pri_cre_quick> ] [ <fcoe_in_pkts_quick> ] [ <fcoe_in_octets_quick> ] [ <fcoe_out_pkts_quick> ] [ <fcoe_out_octets_quick> ] [ TABLE_members_quick [ <port_channel_member_quick> ] ] [ <interface_last_changed_quick> ] [ <time_last_cleared_quick> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] + [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_admin_fec_state> ] [ <eth_oper_fec_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <tunnel_vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> [ <svi_if_index> ] [ <svi_admin_state> ] [ <oper_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <vlan_id> ] [ <type> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] [ <svi_time_last_cleared> ] { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_reliability> ] [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] <switchport> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

controller

(Optional) Show controller configured interfaces

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

vsan_brief

(Optional) vsan for brief

oper_port_state

(Optional) oper port state

port_state

(Optional) port state

bound_interface

(Optional) bound interface

port_desc

(Optional) port description

port_des

(Optional) port description

mgmt_hw_desc1

(Optional) HW description

mgmt_hw_addr1

(Optional) HW address

port_name

(Optional) port description

hardware

(Optional) Hardware is

sfp

(Optional) sfp

port_wwn

(Optional) port wwn

peer_port_wwn

(Optional) peer port wwn

admin_mode

(Optional) admin mode

admin_trunk_mode

(Optional) admin trunk mode

snmp_trap

(Optional) snmp trap

status

(Optional) Status

state_rsn1

(Optional) state reason

fcot_info

(Optional) fcot info

bind_info

(Optional) bind interface

bind_mac

(Optional) bind mac

bind_type

(Optional) bind type

port_mode

(Optional) port mode

fcid

(Optional) fcid

cfg_port_vsan

(Optional) config port vsan

vsan

(Optional) vsan for brief

port_rate_mode

(Optional) operation port rate mode

oper_speed

(Optional) speed

admin_speed

(Optional) admin speed

port_channel

(Optional) port channel

ip_addr1

(Optional) Ip address

oper_txbbcredit

(Optional) oper tx bbcredit

oper_rxbbcredit

(Optional) oper rx bbcredit

port_bb_scn

(Optional) port bb scn

admin_rxbufsize

(Optional) admin rx bufsize

admin_port_encap

(Optional) admin port encap

admin_beacon_mode

(Optional) admin beacon mode

admin_fec_state

(Optional) admin fec state

oper_fec_state

(Optional) oper fec state

bundle_if_index

(Optional) bundle if index

trkd_if_index

(Optional) Trunk interfaces

trk_cfg_vsans

(Optional) Trunk vsans

trkd_port_state

(Optional) trunk port state

num_ports

(Optional) number of ports

TABLE_trk_intf

(Optional) trunk interfaces

trk_intf

(Optional) track interface

info_type_num

(Optional) info type num

info_model_num

(Optional) info model num

info_manufacturer

(Optional) info manufacturer

info_port_id

(Optional) info port id

active_vsan

(Optional) allowed and active vsan

trunk_vsan_up

(Optional) trunk vsan up

trunk_vsan_isolated

(Optional) trunk vsan isolated

trunk_vsan_initializing

(Optional) trunk vsan initializing

in_bps

(Optional) input bits/sec

in_byps

(Optional) input bytes/sec

in_fps

(Optional) input frames/sec

out_bps

(Optional) output bits/sec

out_byps

(Optional) output bytes/sec

out_fps

(Optional) output frames/sec

total_in_frames

(Optional) total in frames

total_in_bytes

(Optional) total in bytes

total_in_discards

(Optional) total in discards

total_in_errors

(Optional) total in errors

invalid_crc

(Optional) invalid crc

unknown_class_frames

(Optional) unknown class frames

frames_too_long

(Optional) frames too long

frames_too_short

(Optional) frames too short

total_out_frames

(Optional) total out frames

total_out_bytes

(Optional) total out bytes

total_out_discards

(Optional) total out discards

total_out_errors

(Optional) total out errors

in_ols

(Optional) input OLS

in_lrr

(Optional) input LRR

in_nos

(Optional) input NOS

in_loop_inits

(Optional) input loop inits

out_ols

(Optional) output OLS

out_lrr

(Optional) ouput LRR

out_nos

(Optional) output NOS

out_loop_inits

(Optional) output loop inits

rx_b2b_perf_buff

(Optional) rx b2b performance buff

rx_b2b_credit

(Optional) rx b2b credit

tx_b2b_credit

(Optional) tx b2b credit

tx_b2b_low_pri_cre

(Optional) tx b2b low pri credit

fcoe_in_pkts

(Optional) fcoe in pkts

fcoe_in_octets

(Optional) fcoe in octets

fcoe_out_pkts

(Optional) fcoe out pkts

fcoe_out_octets

(Optional) fcoe out octets

TABLE_members

(Optional) table for port-channel member interface

port_channel_member

(Optional) port-channel member interface

interface_last_changed

(Optional) interface last changed

time_last_cleared

(Optional) counters last cleared

interface_quick

(Optional) Interface index

vsan_brief_quick

(Optional) vsan for brief

oper_port_state_quick

(Optional) oper port state

port_state_quick

(Optional) port state

bound_interface_quick

(Optional) bound interface

port_desc_quick

(Optional) port description

port_des_quick

(Optional) port description

mgmt_hw_desc1_quick

(Optional) HW description

mgmt_hw_addr1_quick

(Optional) HW address

port_name_quick

(Optional) port description

hardware_quick

(Optional) Hardware is

sfp_quick

(Optional) sfp

port_wwn_quick

(Optional) port wwn

peer_port_wwn_quick

(Optional) peer port wwn

admin_mode_quick

(Optional) admin mode

admin_trunk_mode_quick

(Optional) admin trunk mode

snmp_trap_quick

(Optional) snmp trap

status_quick

(Optional) Status

state_rsn1_quick

(Optional) state reason

fcot_info_quick

(Optional) fcot info

bind_info_quick

(Optional) bind interface

bind_mac_quick

(Optional) bind mac

bind_type_quick

(Optional) bind type

port_mode_quick

(Optional) port mode

fcid_quick

(Optional) fcid

cfg_port_vsan_quick

(Optional) config port vsan

vsan_quick

(Optional) vsan for brief

port_rate_mode_quick

(Optional) operation port rate mode

oper_speed_quick

(Optional) speed

admin_speed_quick

(Optional) admin speed

port_channel_quick

(Optional) port channel

ip_addr1_quick

(Optional) Ip address

oper_txbbcredit_quick

(Optional) oper tx bbcredit

oper_rxbbcredit_quick

(Optional) oper rx bbcredit

port_bb_scn_quick

(Optional) port bb scn

admin_rxbufsize_quick

(Optional) admin rx bufsize

admin_port_encap_quick

(Optional) admin port encap

admin_beacon_mode_quick

(Optional) admin beacon mode

admin_fec_state_quick

(Optional) admin fec state

oper_fec_state_quick

(Optional) oper fec state

bundle_if_index_quick

(Optional) bundle if index

trkd_if_index_quick

(Optional) Trunk interfaces

trk_cfg_vsans_quick

(Optional) Trunk vsans

trkd_port_state_quick

(Optional) trunk port state

num_ports_quick

(Optional) number of ports

TABLE_trk_intf_quick

(Optional) trunk interfaces

trk_intf_quick

(Optional) track interface

info_type_num_quick

(Optional) info type num

info_model_num_quick

(Optional) info model num

info_manufacturer_quick

(Optional) info manufacturer

info_port_id_quick

(Optional) info port id

active_vsan_quick

(Optional) allowed and active vsan

trunk_vsan_up_quick

(Optional) trunk vsan up

trunk_vsan_isolated_quick

(Optional) trunk vsan isolated

trunk_vsan_initializing_quick

(Optional) trunk vsan initializing

in_bps_quick

(Optional) input bits/sec

in_byps_quick

(Optional) input bytes/sec

in_fps_quick

(Optional) input frames/sec

out_bps_quick

(Optional) output bits/sec

out_byps_quick

(Optional) output bytes/sec

out_fps_quick

(Optional) output frames/sec

total_in_frames_quick

(Optional) total in frames

total_in_bytes_quick

(Optional) total in bytes

total_in_discards_quick

(Optional) total in discards

total_in_errors_quick

(Optional) total in errors

invalid_crc_quick

(Optional) invalid crc

unknown_class_frames_quick

(Optional) unknown class frames

frames_too_long_quick

(Optional) frames too long

frames_too_short_quick

(Optional) frames too short

total_out_frames_quick

(Optional) total out frames

total_out_bytes_quick

(Optional) total out bytes

total_out_discards_quick

(Optional) total out discards

total_out_errors_quick

(Optional) total out errors

in_ols_quick

(Optional) input OLS

in_lrr_quick

(Optional) input LRR

in_nos_quick

(Optional) input NOS

in_loop_inits_quick

(Optional) input loop inits

out_ols_quick

(Optional) output OLS

out_lrr_quick

(Optional) ouput LRR

out_nos_quick

(Optional) output NOS

out_loop_inits_quick

(Optional) output loop inits

rx_b2b_perf_buff_quick

(Optional) rx b2b performance buff

rx_b2b_credit_quick

(Optional) rx b2b credit

tx_b2b_credit_quick

(Optional) tx b2b credit

tx_b2b_low_pri_cre_quick

(Optional) tx b2b low pri credit

fcoe_in_pkts_quick

(Optional) fcoe in pkts

fcoe_in_octets_quick

(Optional) fcoe in octets

fcoe_out_pkts_quick

(Optional) fcoe out pkts

fcoe_out_octets_quick

(Optional) fcoe out octets

TABLE_members_quick

(Optional) table for port-channel member interface

port_channel_member_quick

(Optional) port-channel member interface

interface_last_changed_quick

(Optional) interface last changed

time_last_cleared_quick

(Optional) counters last cleared

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

admin_state

(Optional) admin state

share_state

(Optional) Interface ownership

parent_interface

(Optional) parent interface

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

encapsulation

(Optional) Encapsulation

medium

(Optional) medium type

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_eee_state

(Optional) EEE state

eth_admin_fec_state

(Optional) Admin FEC state

eth_oper_fec_state

(Optional) Oper FEC state

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_jumbo_inpkts

(Optional) Incoming jumbo pkts

eth_storm_supp

(Optional) storm suppression

eth_runts

(Optional) runts

eth_giants

(Optional) giants

eth_crc

(Optional) CRC

eth_nobuf

(Optional) No buffer received

eth_inerr

(Optional) input errors

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_dribble

(Optional) input packets with dribble condition

eth_indiscard

(Optional) discards

eth_inpause

(Optional) pause input

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_jumbo_outpkts

(Optional) Outgoing jumbo pkts

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_deferred

(Optional) deferred

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_outdiscard

(Optional) output discard

eth_outpause

(Optional) PAUSE output

mgmt_hw_desc

(Optional) HW description

mgmt_hw_addr

(Optional) HW address

mgmt_ip_addr

(Optional) IP address

mgmt_ip_mask

(Optional) IP address mask

mgmt_mtu

(Optional) MTU

mgmt_speed

(Optional) Speed

mgmt_duplex

(Optional) Duplex

vdc_lvl_in_avg_bits

(Optional) VDC level average input bits

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_out_avg_bits

(Optional) VDC level average output bits

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_errors

(Optional) Input errors

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_errors

(Optional) Output errors

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_fifo

(Optional) Output fifo

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

tunnel_vrf_name

(Optional) tunnel VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

svi_if_index

(Optional) Interface

svi_admin_state

(Optional)

oper_state

(Optional)

svi_rsn_desc

(Optional) Interface state reason detailed

svi_line_proto

(Optional)

svi_hw

(Optional) Hardware

svi_mac

(Optional) Address

svi_desc

(Optional) Interface Description

svi_ip_addr

(Optional) IP Address

svi_ip_mask

(Optional) IP address mask

svi_mtu

(Optional) MTU size in bytes

svi_bw

(Optional) Bandwidth in kilobits

svi_delay

(Optional) Throughput delay (tens of microseconds)

vlan_id

(Optional) Vlan

type

(Optional) type

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_carrier_delay_sec

(Optional) carrier delay value in seconds

svi_carrier_delay_msec

(Optional) carrier delay value in milli-seconds

svi_arp_type

(Optional) ARP type

svi_arp_timeout

(Optional) ARP timeout value

svi_time_last_cleared

(Optional) Time last cleared

TABLE_sec_vlan

(Optional) secondary vlans

sec_vlan

(Optional) vlan id

sec_vlan_type

(Optional) secondary vlan type

svi_reliability

(Optional) Reliability

overlay_addr

(Optional) Overlay address

overlay_addr_mask

(Optional) Overlay address mask

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_encap_str

(Optional) Encap type

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

overlay_last_link_flap

(Optional) Last link flap

overlay_clear_counters

(Optional) Last clearing of show interface counters

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

switchport

(Optional) Switchport enabled

Command Mode

- /exec

show interface

show interface <ifloop> [ __readonly__ TABLE_interface <interface> [ <state> ] [ <admin_state> ] [ <share_state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <eth_bundle> ] [ <mgmt_sfp> ] [ <mgmt_type> ] [ <eth_eee_state> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

admin_state

(Optional) Interface admin state

share_state

(Optional) Interface ownership

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

mgmt_sfp

(Optional) mgmt sfp

mgmt_type

(Optional) mgmt type

eth_bundle

(Optional) Belongs to bundle

eth_eee_state

(Optional) EEE state

eth_dce_mode

(Optional) DCE mode description

vpc_status

(Optional) VPC status

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP Prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_encap_vlan

(Optional) Encapsulation Vlan

encapsulation

(Optional) Encapsulation

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_loopback

(Optional) Loopback

eth_keepalive

(Optional) Keepalive

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_mode

(Optional) Port mode

eth_ratemode

(Optional) Rate mode

eth_autoneg

(Optional) Autonegotiation

eth_beacon

(Optional) Beacon

eth_media

(Optional) Media type

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_clk_mode

(Optional) Clock mode

eth_arp_type

(Optional) ARP type

eth_arp_timeout

(Optional) ARP timeout

eth_last_in

(Optional) Last input

eth_last_out

(Optional) Last output

eth_out_hang

(Optional) Last output hang

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_link_flapped

(Optional) Last link flapped

eth_inq_size

(Optional) Input queue size

eth_inq_max

(Optional) Input queue max

eth_inq_drops

(Optional) Input queue drops

eth_inq_flush

(Optional) Input queue flushes

eth_out_drop

(Optional) Output drops

eth_q_strategy

(Optional) Queueing strategy

eth_outq_size

(Optional) Output queue size

eth_outq_max

(Optional) Output queue max

eth_reset_cntr

(Optional) Interface resets

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

Command Mode

- /exec

show interface

show interface <iftun_desc> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <desc> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <tunnel_vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

iftun_desc

Enter tunnel interface number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

tunnel_vrf_name

(Optional) tunnel VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

Command Mode

- /exec

show interface

show interface <ifeth> [ quick ] [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] + [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_admin_fec_state> ] [ <eth_oper_fec_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] [ <switchport> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth

Enter interface type and number in module/slot format

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

admin_state

(Optional) admin state

share_state

(Optional) Interface ownership

parent_interface

(Optional) parent interface

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

encapsulation

(Optional) Encapsulation

medium

(Optional) medium type

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_eee_state

(Optional) EEE state

eth_admin_fec_state

(Optional) Admin FEC state

eth_oper_fec_state

(Optional) Oper FEC state

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_jumbo_inpkts

(Optional) Incoming jumbo pkts

eth_storm_supp

(Optional) storm suppression

eth_runts

(Optional) runts

eth_giants

(Optional) giants

eth_crc

(Optional) CRC

eth_nobuf

(Optional) No buffer received

eth_inerr

(Optional) input errors

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_dribble

(Optional) input packets with dribble condition

eth_indiscard

(Optional) discards

eth_inpause

(Optional) pause input

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_jumbo_outpkts

(Optional) Outgoing jumbo pkts

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_deferred

(Optional) deferred

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_outdiscard

(Optional) output discard

eth_outpause

(Optional) PAUSE output

switchport

(Optional) Switchport enabled

Command Mode

- /exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> <state_rsn> <state_rsn_desc> <desc> [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

overlay_addr

(Optional) Overlay address

overlay_addr_mask

(Optional) Overlay address mask

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_encap_str

(Optional) Encap type

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

overlay_last_link_flap

(Optional) Last link flap

overlay_clear_counters

(Optional) Last clearing of show interface counters

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

- /exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <admin_state> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <nve_addr> ] [ <nve_addr_mask> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_encap_str> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] [ <nve_last_link_flap> ] [ <nve_clear_counters> ] [ <nve_load_interval> ] [ <nve_rx_ucastpkts> ] [ <nve_rx_ucastbytes> ] [ <nve_rx_mcastpkts> ] [ <nve_rx_mcastbytes> ] [ <nve_rx_pkts> ] [ <nve_rx_bytes> ] [ <nve_rx_bcastpkts> ] [ <nve_rx_bcastbytes> ] [ <nve_rx_bitrate> ] [ <nve_rx_pktrate> ] [ <nve_tx_ucastpkts> ] [ <nve_tx_ucastbytes> ] [ <nve_tx_mcastpkts> ] [ <nve_tx_mcastbytes> ] [ <nve_tx_bcastpkts> ] [ <nve_tx_bcastbytes> ] [ <nve_tx_pkts> ] [ <nve_tx_bytes> ] [ <nve_tx_bitrate> ] [ <nve_tx_pktrate> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

admin_state

(Optional) admin state

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

share_state

(Optional) Interface ownership

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

encapsulation

(Optional) Encapsulation

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

nve_addr

(Optional) Peer address

nve_addr_mask

(Optional) Peer address mask

nve_vcid

(Optional) VCID

nve_mtu

(Optional) MTU

nve_bandwidth

(Optional) Bandwidth

nve_encap_str

(Optional) Encap type

nve_vrf

(Optional) VRF

nve_src_addr

(Optional) Source address

nve_dst_addr

(Optional) Destination address

nve_last_link_flap

(Optional) Last link flap

nve_clear_counters

(Optional) Last clearing of show interface counters

nve_load_interval

(Optional) Load interval

nve_rx_ucastpkts

(Optional) Received ucast pkts

nve_rx_ucastbytes

(Optional) Received ucast bytes

nve_rx_mcastpkts

(Optional) Received mcast pkts

nve_rx_mcastbytes

(Optional) Received mcast bytes

nve_rx_bcastpkts

(Optional) Received bcast pkts

nve_rx_bcastbytes

(Optional) Received bcast bytes

nve_rx_pkts

(Optional) Total received pkts

nve_rx_bytes

(Optional) Total received bytes

nve_rx_bitrate

(Optional) Receive bit rate

nve_rx_pktrate

(Optional) Receive pkt rate

nve_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

nve_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

nve_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

nve_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

nve_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

nve_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

nve_tx_pkts

(Optional) Total transmitted pkts

nve_tx_bytes

(Optional) Total transmitted bytes

nve_tx_bitrate

(Optional) Transmit bit rate

nve_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

- /exec

show interface aggregate-counters

show interface <ifid_aggr_ctrs2> aggregate-counters [ brief ] [ __readonly__ TABLE_interface <interface_aggr> [ <str_aggr> ] [ <if_index_aggr> ] [ <in_bps_aggr> ] [ <in_byps_aggr> ] [ <in_fps_aggr> ] [ <out_bps_aggr> ] [ <out_byps_aggr> ] [ <out_fps_aggr> ] [ <total_in_frames_aggr> ] [ <total_in_bytes_aggr> ] [ <C2InFrames_aggr> ] [ <C2InOctets_aggr> ] [ <C3InFrames_aggr> ] [ <C3InOctets_aggr> ] [ <CfInFrames_aggr> ] [ <CfInOctets_aggr> ] [ <total_in_discards_aggr> ] [ <total_in_errors_aggr> ] [ <InvalidCrcs_aggr> ] [ <UnknownClassFrames_aggr> ] [ <FramesTooLong_aggr> ] [ <FramesTooShort_aggr> ] [ <total_out_frames_aggr> ] [ <total_out_bytes_aggr> ] [ <C2OutFrames_aggr> ] [ <C2OutOctets_aggr> ] [ <C3OutFrames_aggr> ] [ <C3OutOctets_aggr> ] [ <CfOutFrames_aggr> ] [ <CfOutOctets_aggr> ] [ <total_out_discards_aggr> ] [ <total_out_errors_aggr> ] [ <OlsIns_aggr> ] [ <LRRIn_aggr> ] [ <NOSIn_aggr> ] [ <in_lip_aggr> ] [ <OlsOuts_aggr> ] [ <LRROut_aggr> ] [ <NOSOut_aggr> ] [ <out_lip_aggr> ] [ <LinkFailures_aggr> ] [ <SyncLosses_aggr> ] [ <SigLosses_aggr> ] [ <TxBBCreditTransistionToZero_aggr> ] [ <RxBBCreditTransistionToZero_aggr> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <InputRate_aggr_brief> ] [ <TotalIpFrame_aggr_brief> ] [ <OutRate_aggr_brief> ] [ <TotalOpFrame_aggr_brief> ] [ <line_aggr_brief> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_aggr_ctrs2

Enter interface type and number in module/slot format

aggregate-counters

Show interface aggregate counters

brief

(Optional) Show interface aggregate counters in brief

__readonly__

(Optional) Read Only

interface_aggr

(Optional) Interface index

TABLE_interface

(Optional) show interface

str_aggr

(Optional) string

if_index_aggr

(Optional) index

in_bps_aggr

(Optional) input rate in bits/s

in_byps_aggr

(Optional) input rate in bytes/s

in_fps_aggr

(Optional) input rate in frames/s

out_bps_aggr

(Optional) output rate in bits/s

out_byps_aggr

(Optional) output rate in bytes/s

out_fps_aggr

(Optional) output rate in frames/s

total_in_frames_aggr

(Optional) total input frames

total_in_bytes_aggr

(Optional) total input frames

C2InFrames_aggr

(Optional) class-2 frames

C2InOctets_aggr

(Optional) class-2 frames in bytes

C3InFrames_aggr

(Optional) class-3 frames

C3InOctets_aggr

(Optional) class-3 frames in bytes

CfInFrames_aggr

(Optional) class-f frames

CfInOctets_aggr

(Optional) class-f frames in bytes

total_in_discards_aggr

(Optional) total in discards

total_in_errors_aggr

(Optional) total in errors

InvalidCrcs_aggr

(Optional) invalid CRC

UnknownClassFrames_aggr

(Optional) unknown class

FramesTooLong_aggr

(Optional) too long

FramesTooShort_aggr

(Optional) too short

total_out_frames_aggr

(Optional) total out frames

total_out_bytes_aggr

(Optional) total out frames in byte

C2OutFrames_aggr

(Optional) class-2 out frames

C2OutOctets_aggr

(Optional) class-2 out frames in bytes

C3OutFrames_aggr

(Optional) class-3 out frames

C3OutOctets_aggr

(Optional) class-3 out frames in bytes

CfOutFrames_aggr

(Optional) class-f out frames

CfOutOctets_aggr

(Optional) class-f out frames in bytes

total_out_discards_aggr

(Optional) total out discards

total_out_errors_aggr

(Optional) total out errors

OlsIns_aggr

(Optional) input OLS

LRRIn_aggr

(Optional) input LRR

NOSIn_aggr

(Optional) input NOS

in_lip_aggr

(Optional) loop inits

OlsOuts_aggr

(Optional) output OLS

LRROut_aggr

(Optional) output LRR

NOSOut_aggr

(Optional) output NOS

out_lip_aggr

(Optional) loop inits

LinkFailures_aggr

(Optional) link faliure

SyncLosses_aggr

(Optional) sync losses

SigLosses_aggr

(Optional) signal losses

TxBBCreditTransistionToZero_aggr

(Optional) B2B credit transitions to zero

RxBBCreditTransistionToZero_aggr

(Optional) B2B credit transitions to zero

rx_b2b_perf_buff

(Optional) rx B2B performance buff

rx_b2b_credit

(Optional) rx B2B credit

tx_b2b_credit

(Optional) tx B2B credit

tx_b2b_low_pri_cre

(Optional) tx B2B low price credit

InputRate_aggr_brief

(Optional) Input rate in MBps

TotalIpFrame_aggr_brief

(Optional) Total input frames

OutRate_aggr_brief

(Optional) Output rate in MBps

TotalOpFrame_aggr_brief

(Optional) Total output frames

line_aggr_brief

(Optional) to print a line

Command Mode

- /exec

show interface aggregate-counters

show interface <ifid_aggr_ctrs> aggregate-counters [ brief ] [ __readonly__ TABLE_interface <interface_aggr> [ <str_aggr> ] [ <if_index_aggr> ] [ <in_bps_aggr> ] [ <in_byps_aggr> ] [ <in_fps_aggr> ] [ <out_bps_aggr> ] [ <out_byps_aggr> ] [ <out_fps_aggr> ] [ <total_in_frames_aggr> ] [ <total_in_bytes_aggr> ] [ <C2InFrames_aggr> ] [ <C2InOctets_aggr> ] [ <C3InFrames_aggr> ] [ <C3InOctets_aggr> ] [ <CfInFrames_aggr> ] [ <CfInOctets_aggr> ] [ <total_in_discards_aggr> ] [ <total_in_errors_aggr> ] [ <InvalidCrcs_aggr> ] [ <UnknownClassFrames_aggr> ] [ <FramesTooLong_aggr> ] [ <FramesTooShort_aggr> ] [ <total_out_frames_aggr> ] [ <total_out_bytes_aggr> ] [ <C2OutFrames_aggr> ] [ <C2OutOctets_aggr> ] [ <C3OutFrames_aggr> ] [ <C3OutOctets_aggr> ] [ <CfOutFrames_aggr> ] [ <CfOutOctets_aggr> ] [ <total_out_discards_aggr> ] [ <total_out_errors_aggr> ] [ <OlsIns_aggr> ] [ <LRRIn_aggr> ] [ <NOSIn_aggr> ] [ <in_lip_aggr> ] [ <OlsOuts_aggr> ] [ <LRROut_aggr> ] [ <NOSOut_aggr> ] [ <out_lip_aggr> ] [ <LinkFailures_aggr> ] [ <SyncLosses_aggr> ] [ <SigLosses_aggr> ] [ <TxBBCreditTransistionToZero_aggr> ] [ <RxBBCreditTransistionToZero_aggr> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <InputRate_aggr_brief> ] [ <TotalIpFrame_aggr_brief> ] [ <OutRate_aggr_brief> ] [ <TotalOpFrame_aggr_brief> ] [ <line_aggr_brief> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_aggr_ctrs

Enter interface type and number in module/slot format

aggregate-counters

Show interface aggregate counters

brief

(Optional) Show interface aggregate counters in brief

__readonly__

(Optional) Read Only

interface_aggr

(Optional) Interface index

TABLE_interface

(Optional) show interface

str_aggr

(Optional) string

if_index_aggr

(Optional) index

in_bps_aggr

(Optional) input rate in bits/s

in_byps_aggr

(Optional) input rate in bytes/s

in_fps_aggr

(Optional) input rate in frames/s

out_bps_aggr

(Optional) output rate in bits/s

out_byps_aggr

(Optional) output rate in bytes/s

out_fps_aggr

(Optional) output rate in frames/s

total_in_frames_aggr

(Optional) total input frames

total_in_bytes_aggr

(Optional) total input frames

C2InFrames_aggr

(Optional) class-2 frames

C2InOctets_aggr

(Optional) class-2 frames in bytes

C3InFrames_aggr

(Optional) class-3 frames

C3InOctets_aggr

(Optional) class-3 frames in bytes

CfInFrames_aggr

(Optional) class-f frames

CfInOctets_aggr

(Optional) class-f frames in bytes

total_in_discards_aggr

(Optional) total in discards

total_in_errors_aggr

(Optional) total in errors

InvalidCrcs_aggr

(Optional) invalid CRC

UnknownClassFrames_aggr

(Optional) unknown class

FramesTooLong_aggr

(Optional) too long

FramesTooShort_aggr

(Optional) too short

total_out_frames_aggr

(Optional) total out frames

total_out_bytes_aggr

(Optional) total out frames in byte

C2OutFrames_aggr

(Optional) class-2 out frames

C2OutOctets_aggr

(Optional) class-2 out frames in bytes

C3OutFrames_aggr

(Optional) class-3 out frames

C3OutOctets_aggr

(Optional) class-3 out frames in bytes

CfOutFrames_aggr

(Optional) class-f out frames

CfOutOctets_aggr

(Optional) class-f out frames in bytes

total_out_discards_aggr

(Optional) total out discards

total_out_errors_aggr

(Optional) total out errors

OlsIns_aggr

(Optional) input OLS

LRRIn_aggr

(Optional) input LRR

NOSIn_aggr

(Optional) input NOS

in_lip_aggr

(Optional) loop inits

OlsOuts_aggr

(Optional) output OLS

LRROut_aggr

(Optional) output LRR

NOSOut_aggr

(Optional) output NOS

out_lip_aggr

(Optional) loop inits

LinkFailures_aggr

(Optional) link faliure

SyncLosses_aggr

(Optional) sync losses

SigLosses_aggr

(Optional) signal losses

TxBBCreditTransistionToZero_aggr

(Optional) B2B credit transitions to zero

RxBBCreditTransistionToZero_aggr

(Optional) B2B credit transitions to zero

rx_b2b_perf_buff

(Optional) rx B2B performance buff

rx_b2b_credit

(Optional) rx B2B credit

tx_b2b_credit

(Optional) tx B2B credit

tx_b2b_low_pri_cre

(Optional) tx B2B low price credit

InputRate_aggr_brief

(Optional) Input rate in MBps

TotalIpFrame_aggr_brief

(Optional) Total input frames

OutRate_aggr_brief

(Optional) Output rate in MBps

TotalOpFrame_aggr_brief

(Optional) Total output frames

line_aggr_brief

(Optional) to print a line

Command Mode

- /exec

show interface aggregate-counters

show interface aggregate-counters [ brief ] [ __readonly__ TABLE_interface <interface_aggr> [ <str_aggr> ] [ <if_index_aggr> ] [ <in_bps_aggr> ] [ <in_byps_aggr> ] [ <in_fps_aggr> ] [ <out_bps_aggr> ] [ <out_byps_aggr> ] [ <out_fps_aggr> ] [ <total_in_frames_aggr> ] [ <total_in_bytes_aggr> ] [ <C2InFrames_aggr> ] [ <C2InOctets_aggr> ] [ <C3InFrames_aggr> ] [ <C3InOctets_aggr> ] [ <CfInFrames_aggr> ] [ <CfInOctets_aggr> ] [ <total_in_discards_aggr> ] [ <total_in_errors_aggr> ] [ <InvalidCrcs_aggr> ] [ <UnknownClassFrames_aggr> ] [ <FramesTooLong_aggr> ] [ <FramesTooShort_aggr> ] [ <total_out_frames_aggr> ] [ <total_out_bytes_aggr> ] [ <C2OutFrames_aggr> ] [ <C2OutOctets_aggr> ] [ <C3OutFrames_aggr> ] [ <C3OutOctets_aggr> ] [ <CfOutFrames_aggr> ] [ <CfOutOctets_aggr> ] [ <total_out_discards_aggr> ] [ <total_out_errors_aggr> ] [ <OlsIns_aggr> ] [ <LRRIn_aggr> ] [ <NOSIn_aggr> ] [ <in_lip_aggr> ] [ <OlsOuts_aggr> ] [ <LRROut_aggr> ] [ <NOSOut_aggr> ] [ <out_lip_aggr> ] [ <LinkFailures_aggr> ] [ <SyncLosses_aggr> ] [ <SigLosses_aggr> ] [ <TxBBCreditTransistionToZero_aggr> ] [ <RxBBCreditTransistionToZero_aggr> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <InputRate_aggr_brief> ] [ <TotalIpFrame_aggr_brief> ] [ <OutRate_aggr_brief> ] [ <TotalOpFrame_aggr_brief> ] [ <line_aggr_brief> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

aggregate-counters

Show interface aggregate counters

brief

(Optional) Show interface aggregate counters in brief

__readonly__

(Optional) Read Only

interface_aggr

(Optional) Interface index

TABLE_interface

(Optional) show interface

str_aggr

(Optional) string

if_index_aggr

(Optional) index

in_bps_aggr

(Optional) input rate in bits/s

in_byps_aggr

(Optional) input rate in bytes/s

in_fps_aggr

(Optional) input rate in frames/s

out_bps_aggr

(Optional) output rate in bits/s

out_byps_aggr

(Optional) output rate in bytes/s

out_fps_aggr

(Optional) output rate in frames/s

total_in_frames_aggr

(Optional) total input frames

total_in_bytes_aggr

(Optional) total input frames

C2InFrames_aggr

(Optional) class-2 frames

C2InOctets_aggr

(Optional) class-2 frames in bytes

C3InFrames_aggr

(Optional) class-3 frames

C3InOctets_aggr

(Optional) class-3 frames in bytes

CfInFrames_aggr

(Optional) class-f frames

CfInOctets_aggr

(Optional) class-f frames in bytes

total_in_discards_aggr

(Optional) total in discards

total_in_errors_aggr

(Optional) total in errors

InvalidCrcs_aggr

(Optional) invalid CRC

UnknownClassFrames_aggr

(Optional) unknown class

FramesTooLong_aggr

(Optional) too long

FramesTooShort_aggr

(Optional) too short

total_out_frames_aggr

(Optional) total out frames

total_out_bytes_aggr

(Optional) total out frames in byte

C2OutFrames_aggr

(Optional) class-2 out frames

C2OutOctets_aggr

(Optional) class-2 out frames in bytes

C3OutFrames_aggr

(Optional) class-3 out frames

C3OutOctets_aggr

(Optional) class-3 out frames in bytes

CfOutFrames_aggr

(Optional) class-f out frames

CfOutOctets_aggr

(Optional) class-f out frames in bytes

total_out_discards_aggr

(Optional) total out discards

total_out_errors_aggr

(Optional) total out errors

OlsIns_aggr

(Optional) input OLS

LRRIn_aggr

(Optional) input LRR

NOSIn_aggr

(Optional) input NOS

in_lip_aggr

(Optional) loop inits

OlsOuts_aggr

(Optional) output OLS

LRROut_aggr

(Optional) output LRR

NOSOut_aggr

(Optional) output NOS

out_lip_aggr

(Optional) loop inits

LinkFailures_aggr

(Optional) link faliure

SyncLosses_aggr

(Optional) sync losses

SigLosses_aggr

(Optional) signal losses

TxBBCreditTransistionToZero_aggr

(Optional) B2B credit transitions to zero

RxBBCreditTransistionToZero_aggr

(Optional) B2B credit transitions to zero

rx_b2b_perf_buff

(Optional) rx B2B performance buff

rx_b2b_credit

(Optional) rx B2B credit

tx_b2b_credit

(Optional) tx B2B credit

tx_b2b_low_pri_cre

(Optional) tx B2B low price credit

InputRate_aggr_brief

(Optional) Input rate in MBps

TotalIpFrame_aggr_brief

(Optional) Total input frames

OutRate_aggr_brief

(Optional) Output rate in MBps

TotalOpFrame_aggr_brief

(Optional) Total output frames

line_aggr_brief

(Optional) to print a line

Command Mode

- /exec

show interface bbcredit

show interface <ifid_bbcrd> bbcredit [ __readonly__ TABLE_interface [ <interface_sfp> <state> [ <down_reason> ] [ <transmit_b2b> ] [ <receive_b2b> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_bbcrd

Enter interface type and number in module/slot format

bbcredit

Show BB_credit information for interface

__readonly__

(Optional) Read Only

interface_sfp

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) State

down_reason

(Optional) Reason for interface being down

transmit_b2b

(Optional) Transmit B2B

receive_b2b

(Optional) Receive B2B

rx_b2b_perf_buff

(Optional) RX B2B performance buffer

rx_b2b_credit

(Optional) RX B2B credit remaining

tx_b2b_credit

(Optional) TX B2B credit remaining

tx_b2b_low_pri_cre

(Optional) TX B2B low priority Credit

Command Mode

- /exec

show interface brief

show interface <ifeth_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <portchan> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

speed

(Optional) Speed

ratemode

(Optional) Interface port speed

portchan

(Optional) Port Channel Membership

Command Mode

- /exec

show interface brief

show interface <ifid_brf> brief [ __readonly__ { TABLE_interface <interface> [ <desc> ] [ [ <svi_if_index> ] [ <svi_admin_state> ] [ <oper_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <vlan_id> ] [ <type> ] ] [ [ <svi_tx_load> ] [ <svi_rx_load> ] ] [ [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] ] [ [ <svi_time_last_cleared> ] ] [ { TABLE_secondary_vlan <sec_vlan> <sec_vlan_type> } ] [ [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ] [ [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] ] [ [ <svi_reliability> ] ] [ <switchport> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

desc

(Optional) Interface description

svi_if_index

(Optional) Interface

svi_admin_state

(Optional)

oper_state

(Optional)

svi_rsn_desc

(Optional) Interface state reason detailed

svi_line_proto

(Optional)

svi_hw

(Optional) Hardware

svi_mac

(Optional) Address

svi_desc

(Optional) Interface Description

svi_ip_addr

(Optional) IP Address

svi_ip_mask

(Optional) IP address mask

svi_mtu

(Optional) MTU size in bytes

svi_bw

(Optional) Bandwidth in kilobits

svi_delay

(Optional) Throughput delay (tens of microseconds)

vlan_id

(Optional) Vlan

type

(Optional) type

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_carrier_delay_sec

(Optional) carrier delay value in seconds

svi_carrier_delay_msec

(Optional) carrier delay value in milli-seconds

svi_arp_type

(Optional) ARP type

svi_arp_timeout

(Optional) ARP timeout value

svi_time_last_cleared

(Optional) Time last cleared

TABLE_secondary_vlan

(Optional) Secondary vlan

sec_vlan

(Optional) Secondary vlan ID

sec_vlan_type

(Optional) Secondary vlan type

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) IPv4 L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) IPv4 L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) IPv4 L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) IPv4 L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) IPv4 L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) IPv4 L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) IPv4 L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) IPv4 L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_l3avg2_inbytes

(Optional) Load interval 2 L3 average in switched bytes

eth_l3avg2_inpkts

(Optional) Load interval 2 L3 average in switched pkts

eth_l3avg2_outbytes

(Optional) Load interval 2 L3 average out switched bytes

eth_l3avg2_outpkts

(Optional) Load interval 2 L3 average out switched pkts

eth_l3avg3_inbytes

(Optional) Load interval 3 L3 average in switched bytes

eth_l3avg3_inpkts

(Optional) Load interval 3 L3 average in switched pkts

eth_l3avg3_outbytes

(Optional) Load interval 3 L3 average out switched bytes

eth_l3avg3_outpkts

(Optional) Load interval 3 L3 average out switched pkts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_nobuf

(Optional) No buffer received

eth_inbcast

(Optional) Broadcasts

eth_inmcast

(Optional) Multicasts

eth_inucast

(Optional) Unicasts

eth_ingiants

(Optional) giants

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_runts

(Optional) runts

eth_storm_supp

(Optional) storm suppression

eth_throtles

(Optional) throttles

eth_inerr

(Optional) input errors

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_outbcast

(Optional) Broadcasts

eth_outmcast

(Optional) Multicasts

eth_outucast

(Optional) Unicasts

eth_outgiants

(Optional) giants

eth_inpause

(Optional) pause input

eth_dribble

(Optional) input packets with dribble condition

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_underrun

(Optional) underruns

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_resets

(Optional) interface resets

eth_babbles

(Optional) babbles

eth_latecoll

(Optional) late collision

eth_deferred

(Optional) deferred

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_outpause

(Optional) PAUSE output

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_sqetest

(Optional) SQE test

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

eth_eee_atx_lpi_msec

(Optional) Tx Lpi usec

eth_eee_arcv_lpi_msec

(Optional) Rx Lpi usec

eth_eee_atx_lpi_transitions

(Optional) Tx Lpi requests

eth_eee_arcv_lpi_transitions

(Optional) Rx Lpi indications

eth_phy_ber_count

(Optional) Bit error rate counter

eth_phy_errblks_count

(Optional) Errored blocks counter

svi_reliability

(Optional) Reliability

switchport

(Optional) Switchport enabled

Command Mode

- /exec

show interface brief

show interface <ifpch_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <proto> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifpch_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

speed

(Optional) Speed

ratemode

(Optional) Interface port speed

proto

(Optional) Port Channel Protocol

Command Mode

- /exec

show interface brief

show interface brief [ controller | cli ] [ __readonly__ { TABLE_interface [ <interface> ] [ <vlan> ] [ <type> ] [ <portmode> ] [ <state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <vrf> ] [ <ipv6_addr> ] [ <ip_addr> ] [ <speed> ] [ <mtu> ] [ <ratemode> ] [ <portchan> ] [ <proto> ] [ <interface_vfc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <bind_mac> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr1> ] [ { TABLE_secondary_vlan <sec_vlan> <sec_vlan_type> } ] [ <svi_admin_state> ] [ <svi_rsn_desc> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

brief

Show brief info of interface

controller

(Optional) Show controller configured interfaces

cli

(Optional) Show CLI configured interfaces

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

vrf

(Optional) Vrf membership

ip_addr

(Optional) IP address

mtu

(Optional) MTU

speed

(Optional) Speed

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

ratemode

(Optional) Interface port speed

portchan

(Optional) Port Channel Membership

proto

(Optional) Port Channel Protocol

interface_vfc

(Optional) Interface index

vsan_brief

(Optional) vsan brief

admin_mode

(Optional) admin mode

admin_trunk_mode

(Optional) admin trunk mode

status

(Optional) status

fcot_info

(Optional) fcot info

bind_info

(Optional) bind interface

bind_type

(Optional) bind type

bind_mac

(Optional) bind mac address

port_rate_mode

(Optional) rate mode

oper_speed

(Optional) speed

port_channel

(Optional) port channel number

ip_addr1

(Optional) IP address

TABLE_secondary_vlan

(Optional) Secondary vlan

sec_vlan

(Optional) Secondary vlan ID

sec_vlan_type

(Optional) Secondary vlan type

svi_admin_state

(Optional) svi admin state

svi_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface brief

show interface <ifloop_brf> brief [ __readonly__ TABLE_interface <interface> <state> [ <desc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

desc

(Optional) Interface description

Command Mode

- /exec

show interface brief

show interface <iftunnel_brf> brief [ __readonly__ TABLE_interface <interface> <state> <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <tunnel_vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

iftunnel_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

tunnel_vrf_name

(Optional) tunnel VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

Command Mode

- /exec

show interface brief

show interface <ifmgmt_brf> brief [ __readonly__ TABLE_interface <interface> [ <vrf> ] <state> [ <ipv6_addr> ] [ <ip_addr> ] <mtu> <speed> [ <duplex> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vrf

(Optional) Vrf membership

state

(Optional) Interface state

ip_addr

(Optional) IP address

mtu

(Optional) MTU

speed

(Optional) Speed

duplex

(Optional) Duplex

Command Mode

- /exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

Command Mode

- /exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <admin_state> ] [ <nve_addr> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

admin_state

(Optional) admin state

nve_addr

(Optional) Peer address

nve_vcid

(Optional) VCID

nve_mtu

(Optional) MTU

nve_bandwidth

(Optional) Bandwidth

nve_vrf

(Optional) VRF

nve_src_addr

(Optional) Source address

nve_dst_addr

(Optional) Destination address

Command Mode

- /exec

show interface cable-diagnostics-tdr

show interface <ifid_tdr> cable-diagnostics-tdr [ __readonly__ TABLE_interface <interface> <speed> <distance1> <pair1_status> <distance2> <pair2_status> <distance3> <pair3_status> <distance4> <pair4_status> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_tdr

Enter interface type and number in module/slot format

cable-diagnostics-tdr

Show interface tdr test information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

speed

(Optional) Speed

distance1

(Optional) Distance to fault for pair 1

distance2

(Optional) Distance to fault for pair 2

distance3

(Optional) Distance to fault for pair 3

distance4

(Optional) Distance to fault for pair 4

pair1_status

(Optional) Pair1 status

pair2_status

(Optional) Pair2 status

pair3_status

(Optional) Pair3 status

pair4_status

(Optional) Pair4 status

Command Mode

- /exec

show interface capabilities

show interface <ifid_cap> capabilities [ __readonly__ { TABLE_interface_capabilities_if <interface> [ <min_speed> ] [ <max_speed> ] [ <FC-PH_version_high> ] [ <FC-PH_version_low> ] [ <recieve_data_max> ] [ <recieve_data_min> ] [ <transmit_data_max> ] [ <transmit_data_min> ] [ <class_service> ] [ <class_2> ] [ <class_3> ] [ <hold_time_max> ] [ <hold_time_min> ] [ <BB_state_change> ] [ <max_BB_state_change> ] [ <rate_mode_change> ] [ <rate_mode_cap> ] [ <recieve_BB_credit> ] [ <FX_recieve_BB_credit> ] [ <ISL_recieve_BB_credit> ] [ <shared_performance_buf_mod_supp> ] [ <dedicated_performance_buf_mod_supp> ] [ <fx_mode_perf_buf> ] [ <isl_mode_perf_buf> ] [ <out_of_order> ] [ <beacon_mode_config> ] [ <extended_B2B> ] [ <on_demand_port> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_cap

Enter interface type and number in module/slot format

capabilities

Show interface capabilities information

__readonly__

(Optional)

TABLE_interface_capabilities_if

(Optional) interface capabilities if table

interface

(Optional) fc interface

min_speed

(Optional) Min Speed

max_speed

(Optional) Max Speed

FC-PH_version_high

(Optional) FC-PH version high

FC-PH_version_low

(Optional) FC-PH version low

recieve_data_max

(Optional) Receive data field size max

recieve_data_min

(Optional) Receive data field size min

transmit_data_max

(Optional) Transmit data field size max

transmit_data_min

(Optional) Transmit data field size min

class_service

(Optional) Classes of Service supported

class_2

(Optional) Class 2 sequential delivery

class_3

(Optional) Class 3 sequential delivery

hold_time_max

(Optional) Hold time max

hold_time_min

(Optional) Hold time min

BB_state_change

(Optional) BB state change notification

max_BB_state_change

(Optional) Maximum BB state change notifications

rate_mode_change

(Optional) Rate Mode change

rate_mode_cap

(Optional) Rate Mode Capabilities

recieve_BB_credit

(Optional) Receive BB Credit modification supported

FX_recieve_BB_credit

(Optional) FX mode Receive BB Credit (min/max/default)

ISL_recieve_BB_credit

(Optional) ISL mode Receive BB Credit (min/max/default)

shared_performance_buf_mod_supp

(Optional) Performance buffer modification supported shared

dedicated_performance_buf_mod_supp

(Optional) Performance buffer modification supported dedicated

fx_mode_perf_buf

(Optional) FX mode performance buffers

isl_mode_perf_buf

(Optional) ISL mode performance buffers

out_of_order

(Optional) Out of Service capable

beacon_mode_config

(Optional) Beacon mode configurable

extended_B2B

(Optional) Extended B2B credit capable

on_demand_port

(Optional) On demand port activation license supported

Command Mode

- /exec

show interface capabilities

show interface <ifid_eth_cap> capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> [ <dce_capable> ] <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> [ <speed_group_capable> ] <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_eth_cap

Enter interface type and number in module/slot format

capabilities

Show interface capabilities information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

model

(Optional) Model

type

(Optional) Type

speed

(Optional) Speed

duplex

(Optional) Duplex

trunk_encap

(Optional) Trunk encap. type

dce_capable

(Optional) DCE mode capable

channel

(Optional) Channel

bcast_supp

(Optional) Broadcast suppression

flo_ctrl

(Optional) Flowcontrol

rate_mode

(Optional) Rate mode

port_mode

(Optional) Port mode

fast_start

(Optional) Fast start

qos_scheduling

(Optional) QOS scheduling

cos_rewrite

(Optional) CoS rewrite

tos_rewrite

(Optional) ToS rewrite

inline_power

(Optional) Inline power

span

(Optional) SPAN

udld

(Optional) UDLD

mdix

(Optional) MDIX

tdr

(Optional) TDR

lnk_debounce

(Optional) Link debounce

lnk_debounce_time

(Optional) Link debounce time

fex_fabric

(Optional) FEX Fabric

dot1q_tunnel

(Optional) dot1q-tunnel

pvlan_trunk_mode

(Optional) Private-vlan trunk mode

port_group

(Optional) Port Group

port_group_members

(Optional) Port Group Members

eee_capable

(Optional) EEE (efficient-eth)

pfc_capable

(Optional) PFC Capable:

bkout_capable

(Optional) Breakout Capable:

buffer_boost_capable

(Optional) Buffer Boost Capable:

speed_group_capable

(Optional) Speed group capable

macsec_capable

(Optional) MACSEC capable

Command Mode

- /exec

show interface capabilities

show interface capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> [ <dce_capable> ] <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> [ <speed_group_capable> ] <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

capabilities

Show interface capabilities information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

model

(Optional) Model

type

(Optional) Type

speed

(Optional) Speed

duplex

(Optional) Duplex

trunk_encap

(Optional) Trunk encap. type

dce_capable

(Optional) DCE mode capable

channel

(Optional) Channel

bcast_supp

(Optional) Broadcast suppression

flo_ctrl

(Optional) Flowcontrol

rate_mode

(Optional) Rate mode

port_mode

(Optional) Port mode

fast_start

(Optional) Fast start

qos_scheduling

(Optional) QOS scheduling

cos_rewrite

(Optional) CoS rewrite

tos_rewrite

(Optional) ToS rewrite

inline_power

(Optional) Inline power

span

(Optional) SPAN

udld

(Optional) UDLD

mdix

(Optional) MDIX

tdr

(Optional) TDR

lnk_debounce

(Optional) Link debounce

lnk_debounce_time

(Optional) Link debounce time

fex_fabric

(Optional) FEX Fabric

dot1q_tunnel

(Optional) dot1q-tunnel

pvlan_trunk_mode

(Optional) Private-vlan trunk mode

port_group

(Optional) Port Group

port_group_members

(Optional) Port Group Members

eee_capable

(Optional) EEE (efficient-eth)

pfc_capable

(Optional) PFC Capable:

bkout_capable

(Optional) Breakout Capable:

buffer_boost_capable

(Optional) Buffer Boost Capable:

speed_group_capable

(Optional) Speed group capable

macsec_capable

(Optional) MACSEC capable

Command Mode

- /exec

show interface counters

show interface counters [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <fc_inframes> ] [ <eth_inbytes> ] [ <fc_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

fc_inframes

(Optional) Frames input fc

eth_inbytes

(Optional) Bytes input

fc_inbytes

(Optional) Bytes input fc

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

- /exec

show interface counters

show interface <ifid_ctrs> counters [ brief ] [ __readonly__ [ { TABLE_counters <sfp> { TABLE_input_rate <bit_per_sec> <bytes_per_sec> <frames_per_sec> } { TABLE_output_rate <bit_per_sec> <bytes_per_sec> <frames_per_sec> } { TABLE_input <frames> <bytes> [ <class_2_frames> ] [ <class_2_bytes> ] [ <class_3_frames> ] [ <class_3_bytes> ] [ <class_f_frames> ] [ <class_f_bytes> ] [ <class_2_3_frames> ] <discards> <errors> <crc_fcs> <unknown_class> <too_long> <too_short> } { TABLE_output <frames> <bytes> [ <class_2_frames> ] [ <class_2_bytes> ] [ <class_3_frames> ] [ <class_3_bytes> ] [ <class_f_frames> ] [ <class_f_bytes> ] [ <class_2_3_frames> ] [ <discards> ] [ <errors> ] [ <crc_fcs> ] } [ <timeout_discards> ] [ <credit_loss> ] [ <input_ols> ] [ <input_lrr> ] [ <input_nos> ] [ <input_loop_inits> ] [ <output_ols> ] [ <output_lrr> ] [ <output_nos> ] [ <output_loop_inits> ] [ <link_faliures> ] [ <sync_loss> ] [ <signal_loss> ] [ <b2b_transmit> ] [ <b2b_receive> ] [ <txwait> ] [ <tx_credit_unavbl> ] [ <b2b_receive_remain> ] [ <b2b_transmit_remain> ] [ <low_priority_b2b_remain> ] [ <off_seq_err_rcvd> ] [ <broadcast_frames> ] [ <errors> ] [ <queue_drops> ] [ <if_down_drops> ] [ <red_drops> ] [ <bad_ether_type_drops> ] [ <bad_protocol_drops> ] [ <arp_drops> ] [ <reass_frames> ] [ <timestamp_error> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <time_last_cleared> ] } ] [ { TABLE_counters_brief <sfp> <fc_input_rate> <fc_frames_in> <fc_output_rate> <fc_frames_out> } ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_ctrs

Enter interface type and number in module/slot format

counters

Show interface counters

brief

(Optional) Show interface counters in brief

__readonly__

(Optional) Readonly

TABLE_counters

(Optional) Table counters

sfp

(Optional) SFP

TABLE_input_rate

(Optional) Input rate

bit_per_sec

(Optional) Input rate bits per second

bytes_per_sec

(Optional) Input rate bytes per second

frames_per_sec

(Optional) Input rate frames per second

TABLE_output_rate

(Optional) Output rate

bit_per_sec

(Optional) Output rate bits per second

bytes_per_sec

(Optional) Output rate bytes per second

frames_per_sec

(Optional) Output rate frames per second

TABLE_input

(Optional) Input values

frames

(Optional) Frames

bytes

(Optional) Bytes

class_2_frames

(Optional) Class 2 frames

class_2_bytes

(Optional) Class 2 bytes

class_3_frames

(Optional) Class 3 frames

class_3_bytes

(Optional) Class 3 bytes

class_f_frames

(Optional) Class f frames

class_f_bytes

(Optional) Class f bytes

class_2_3_frames

(Optional) Class 2/3 Frames

discards

(Optional) Discards

errors

(Optional) Errors

crc_fcs

(Optional) CRC/FCS

unknown_class

(Optional) Unknown Class

too_long

(Optional) Frames too long

too_short

(Optional) Frames too short

TABLE_output

(Optional) Output Values

frames

(Optional) Frames

bytes

(Optional) Bytes

class_2_frames

(Optional) Class 2 frames

class_2_bytes

(Optional) Class 2 bytes

class_3_frames

(Optional) Class 3 frames

class_3_bytes

(Optional) Class 3 bytes

class_f_frames

(Optional) Class f frames

class_f_bytes

(Optional) Class f bytes

class_2_3_frames

(Optional) Class 2/3 frames

discards

(Optional) Discards

errors

(Optional) Errors

crc_fcs

(Optional) CRC/FCS

timeout_discards

(Optional) Timeout Discards

credit_loss

(Optional) Credit Loss

input_ols

(Optional) input ols

input_lrr

(Optional) input LRR

input_nos

(Optional) input NOS

input_loop_inits

(Optional) input loop inits

output_ols

(Optional) output OLS

output_lrr

(Optional) output LRR

output_nos

(Optional) output NOS

output_loop_inits

(Optional) output loop inits

link_faliures

(Optional) link faliures

sync_loss

(Optional) Sync loss

signal_loss

(Optional) Signal loss

b2b_transmit

(Optional) B2B transmit

b2b_receive

(Optional) B2B receive

txwait

(Optional) TxWait

tx_credit_unavbl

(Optional) Tx credit unavaliable

b2b_receive_remain

(Optional) B2B receive remain

b2b_transmit_remain

(Optional) B2B transmit remain

low_priority_b2b_remain

(Optional) Low priority B2B credit remaining

time_last_cleared

(Optional) Last time cleared

broadcast_frames

(Optional) Broadcast frames

errors

(Optional) Errors

queue_drops

(Optional) Queue drops

if_down_drops

(Optional) If down drops

red_drops

(Optional) Red drops

bad_ether_type_drops

(Optional) Bad ether type drops

bad_protocol_drops

(Optional) Bad Protocol Drops

arp_drops

(Optional) Arp Drops

timestamp_error

(Optional) Timestamp Error

reass_frames

(Optional) Reass Frames

rx_b2b_perf_buff

(Optional) RX B2B performance buffer

rx_b2b_credit

(Optional) RX B2B credit remaining

tx_b2b_credit

(Optional) TX B2B credit remaining

tx_b2b_low_pri_cre

(Optional) TX B2B low priority Credit

off_seq_err_rcvd

(Optional) Offset Sequence Error Received

TABLE_counters_brief

(Optional) Table counters brief

sfp

(Optional) FC id

fc_input_rate

(Optional) Input rate

fc_frames_in

(Optional) Frames in

fc_output_rate

(Optional) Output rate

fc_frames_out

(Optional) Frames out

Command Mode

- /exec

show interface counters

show interface <ifid_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_ctr

Enter interface type and number in module/slot format

counters

Show interface counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

Command Mode

- /exec

show interface counters

show interface counters [ non-zero ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

non-zero

(Optional) To display only the non-zero counter values

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

- /exec

show interface counters

show interface <ifeth_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr

Enter interface type and number in module/slot format

counters

Show interface counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

TABLE_rx_counters

(Optional) show Rx counters

interface_rx

(Optional) Interface index rx

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts input

eth_inmcast

(Optional) Multicasts input

eth_inbcast

(Optional) Broadcasts input

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

TABLE_tx_counters

(Optional) show Tx counters

interface_tx

(Optional) Interface index tx

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts output

eth_outmcast

(Optional) Multicasts output

eth_outbcast

(Optional) Broadcasts output

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

- /exec

show interface counters

show interface <ifrange> counters [ __readonly__ TABLE_interface <interface> [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

counters

Show interface counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

- /exec

show interface counters

show interface <ifrange> counters [ __readonly__ { TABLE_nve_counters <interface> [ <ucast_inbytes> ] [ <ucast_inpkts> ] [ <ucast_outbytes> ] [ <ucast_outpkts> ] [ <mcast_inbytes> ] [ <mcast_inpkts> ] [ <mcast_outbytes> ] [ <mcast_outpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

counters

Show interface counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_nve_counters

(Optional) show interface

ucast_inbytes

(Optional) ucast bytes input

ucast_inpkts

(Optional) ucast packets input

ucast_outbytes

(Optional) ucast bytes output

ucast_outpkts

(Optional) ucast packets output

mcast_inbytes

(Optional) mcast bytes input

mcast_inpkts

(Optional) mcast packets input

mcast_outbytes

(Optional) mcast bytes output

mcast_outpkts

(Optional) mcast packets output

Command Mode

- /exec

show interface counters brief

show interface counters brief [ <counter_val> ] [ __readonly__ TABLE_interface <interface> [ <eth_inrate1> ] [ <eth_inframes1> ] [ <eth_outrate1> ] [ <eth_outframes1> ] [ <eth_load_intv1> ] [ <eth_inrate2> ] [ <eth_inframes2> ] [ <eth_outrate2> ] [ <eth_outframes2> ] [ <eth_load_intv2> ] [ <eth_inrate3> ] [ <eth_inframes3> ] [ <eth_outrate3> ] [ <eth_outframes3> ] [ <eth_load_intv3> ] [ <fc_input_rate> ] [ <fc_frames_in> ] [ <fc_output_rate> ] [ <fc_frames_out> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

brief

Show interface counters in brief

counter_val

(Optional) Specify a single load interval id to show the rates

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_inrate1

(Optional) interval 1 input rate in mbps

eth_inframes1

(Optional) interval 1 input rate in frames (pkts)

eth_outrate1

(Optional) interval 1 output rate in mbps

eth_outframes1

(Optional) interval 1 output rate in output frames (pkts)

eth_load_intv1

(Optional) interval 1 timer value in sec

eth_inrate2

(Optional) interval 2 input rate in mbps

eth_inframes2

(Optional) interval 2 input rate in frames (pkts)

eth_outrate2

(Optional) interval 2 output rate in mbps

eth_outframes2

(Optional) interval 2 output rate in output frames (pkts)

eth_load_intv2

(Optional) interval 2 timer value in sec

eth_inrate3

(Optional) interval 3 input rate in mbps

eth_inframes3

(Optional) interval 3 input rate in frames (pkts)

eth_outrate3

(Optional) interval 3 output rate in mbps

eth_outframes3

(Optional) interval 3 output rate in output frames (pkts)

eth_load_intv3

(Optional) interval 3 timer value in sec

fc_input_rate

(Optional) Input rate

fc_frames_in

(Optional) Frames in

fc_output_rate

(Optional) Output rate

fc_frames_out

(Optional) Frames out

Command Mode

- /exec

show interface counters brief

show interface <ifeth_ctr_brf> counters brief [ <counter_val> ] [ __readonly__ TABLE_interface <interface> <eth_inrate1> <eth_inframes1> <eth_outrate1> <eth_outframes1> <eth_load_intv1> <eth_inrate2> <eth_inframes2> <eth_outrate2> <eth_outframes2> <eth_load_intv2> [ <eth_inrate3> <eth_inframes3> <eth_outrate3> <eth_outframes3> <eth_load_intv3> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_brf

Enter interface type and number in module/slot format

counters

Show interface counters

brief

Show interface counters in brief

counter_val

(Optional) Specify a single load interval id to show the rates

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

eth_inrate1

(Optional) interval 1 input rate in mbps

eth_inframes1

(Optional) interval 1 input rate in frames (pkts)

eth_outrate1

(Optional) interval 1 output rate in mbps

eth_outframes1

(Optional) interval 1 output rate in output frames (pkts)

eth_load_intv1

(Optional) interval 1 timer value in sec

eth_inrate2

(Optional) interval 2 input rate in mbps

eth_inframes2

(Optional) interval 2 input rate in frames (pkts)

eth_outrate2

(Optional) interval 2 output rate in mbps

eth_outframes2

(Optional) interval 2 output rate in output frames (pkts)

eth_load_intv2

(Optional) interval 2 timer value in sec

eth_inrate3

(Optional) interval 3 input rate in mbps

eth_inframes3

(Optional) interval 3 input rate in frames (pkts)

eth_outrate3

(Optional) interval 3 output rate in mbps

eth_outframes3

(Optional) interval 3 output rate in output frames (pkts)

eth_load_intv3

(Optional) interval 3 timer value in sec

Command Mode

- /exec

show interface counters detailed

show interface <ifmgmt_ctr_dtl> counters detailed [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt_ctr_dtl

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_in_avg_bytes

(Optional) VDC level average input bytes

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_out_avg_bytes

(Optional) VDC level average output bytes

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_errors

(Optional) Input errors

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_errors

(Optional) Output errors

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_fifo

(Optional) Output fifo

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

Command Mode

- /exec

show interface counters detailed

show interface counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

detailed

Show only non-zero counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_in_avg_bytes

(Optional) VDC level average input bytes

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_out_avg_bytes

(Optional) VDC level average output bytes

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_errors

(Optional) Input errors

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_errors

(Optional) Output errors

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_fifo

(Optional) Output fifo

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_inpkts

(Optional) Packets input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_ingiants

(Optional) giants

eth_inbytes

(Optional) Bytes input

eth_storm_supp

(Optional) storm suppression

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outpkts

(Optional) packets output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outgiants

(Optional) giants

eth_outbytes

(Optional) bytes output

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_nobuf

(Optional) No buffer received

eth_runts

(Optional) runts

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_coll

(Optional) collisions

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_watchdog

(Optional) watchdog

eth_dribble

(Optional) input packets with dribble condition

eth_inerr

(Optional) input errors

eth_outerr

(Optional) output errors

eth_deferred

(Optional) deferred

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_inpause

(Optional) pause input

eth_outpause

(Optional) PAUSE output

eth_resets

(Optional) interface resets

eth_sqetest

(Optional) SQE test

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_throtles

(Optional) throttles

eth_frame

(Optional) frame

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

svi_time_last_cleared

(Optional) Time last cleared

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_reliability

(Optional) Reliability

Command Mode

- /exec

show interface counters detailed

show interface <ifloop_ctr_dtl> counters detailed [ __readonly__ TABLE_interface <interface> [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop_ctr_dtl

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

Command Mode

- /exec

show interface counters detailed

show interface <ifeth_ctr_dtl> counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_dtl

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_inpkts

(Optional) Packets input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_ingiants

(Optional) giants

eth_inbytes

(Optional) Bytes input

eth_storm_supp

(Optional) storm suppression

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outpkts

(Optional) packets output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outgiants

(Optional) giants

eth_outbytes

(Optional) bytes output

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_nobuf

(Optional) No buffer received

eth_runts

(Optional) runts

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_coll

(Optional) collisions

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_watchdog

(Optional) watchdog

eth_dribble

(Optional) input packets with dribble condition

eth_inerr

(Optional) input errors

eth_outerr

(Optional) output errors

eth_deferred

(Optional) deferred

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_inpause

(Optional) pause input

eth_outpause

(Optional) PAUSE output

eth_resets

(Optional) interface resets

eth_sqetest

(Optional) SQE test

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_throtles

(Optional) throttles

eth_frame

(Optional) frame

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

Command Mode

- /exec

show interface counters detailed all

show interface <ifid_ctr_dtl_all> counters detailed all [ snmp ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

Show every interface counter

snmp

(Optional) Show SNMP MIB values

Command Mode

- /exec

show interface counters detailed all

show interface <ifmgmt_ctr_dtl_all> counters detailed all [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_in_errors> ] [ <mgmt_out_errors> ] [ <mgmt_in_fifo> ] [ <mgmt_out_fifo> ] [ <mgmt_in_compressed> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_out_underruns> ] [ <mgmt_out_collisions> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

Show every interface counter

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_in_avg_bytes

(Optional) VDC level average input bytes

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_out_avg_bytes

(Optional) VDC level average output bytes

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_in_errors

(Optional) Input errors

mgmt_out_errors

(Optional) Output errors

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_fifo

(Optional) Output fifo

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

Command Mode

- /exec

show interface counters detailed all

show interface <ifloop_ctr_dtl_all> counters detailed all [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_mcast_pkts> ] [ <rx_octets> ] [ <tx_octets> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

Show every interface counter

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

rx_total_pkts

(Optional) total input packets

tx_total_pkts

(Optional) total output packets

rx_mcast_pkts

(Optional) input multicasts

rx_octets

(Optional) input bytes

tx_octets

(Optional) output bytes

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

Command Mode

- /exec

show interface counters detailed all

show interface <ifrange> counters detailed all [ snmp ] [ __readonly__ TABLE_interface <interface> [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

everything

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

svi_time_last_cleared

(Optional) Time last cleared

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_reliability

(Optional) Reliability

Command Mode

- /exec

show interface counters detailed all

show interface <ifeth_ctr_dtl_all> counters detailed all [ snmp ] [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_ucast_pkts> ] [ <rx_mcast_pkts> ] [ <rx_bcast_pkts> ] [ <rx_octets> ] [ <tx_ucast_pkts> ] [ <tx_mcast_pkts> ] [ <tx_bcast_pkts> ] [ <tx_octets> ] [ <rxtx_pkts_64octets> ] [ <rxtx_pkts_65_127octets> ] [ <rxtx_pkts_128_255octets> ] [ <rxtx_pkts_256_511octets> ] [ <rxtx_pkts_512_1023octets> ] [ <rxtx_pkts_1024_1518octets> ] [ <rxtx_pkts_1519_1548octets> ] [ <rx_trunk_frames> ] [ <tx_trunk_frames> ] [ <rx_drop_events> ] [ <rxtx_giants> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

everything

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

rx_total_pkts

(Optional) total input packets

tx_total_pkts

(Optional) total output packets

rx_ucast_pkts

(Optional) input unicasts

rx_mcast_pkts

(Optional) input multicasts

rx_bcast_pkts

(Optional) input broadcasts

rx_octets

(Optional) input bytes

tx_ucast_pkts

(Optional) output unicasts

tx_mcast_pkts

(Optional) output multicasts

tx_bcast_pkts

(Optional) output broadcasts

tx_octets

(Optional) output bytes

rxtx_pkts_64octets

(Optional) all pkts between 0 and 64 bytes

rxtx_pkts_65_127octets

(Optional) all pkts between 65 and 127 bytes

rxtx_pkts_128_255octets

(Optional) all pkts between 128 and 255 bytes

rxtx_pkts_256_511octets

(Optional) all pkts between 256 and 511 bytes

rxtx_pkts_512_1023octets

(Optional) all pkts between 512 and 1023 bytes

rxtx_pkts_1024_1518octets

(Optional) all pkts between 1024 and 1518 bytes

rxtx_pkts_1519_1548octets

(Optional) all pkts between 1519 and 1548 bytes

rx_trunk_frames

(Optional) input trunk pkts

tx_trunk_frames

(Optional) output trunk pkts

rx_drop_events

(Optional) dropped pkts

rxtx_giants

(Optional) giants

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) IPv4 L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) IPv4 L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) IPv4 L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) IPv4 L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) IPv4 L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) IPv4 L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) IPv4 L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) IPv4 L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_l3avg2_inbytes

(Optional) Load interval 2 L3 average in switched bytes

eth_l3avg2_inpkts

(Optional) Load interval 2 L3 average in switched pkts

eth_l3avg2_outbytes

(Optional) Load interval 2 L3 average out switched bytes

eth_l3avg2_outpkts

(Optional) Load interval 2 L3 average out switched pkts

eth_l3avg3_inbytes

(Optional) Load interval 3 L3 average in switched bytes

eth_l3avg3_inpkts

(Optional) Load interval 3 L3 average in switched pkts

eth_l3avg3_outbytes

(Optional) Load interval 3 L3 average out switched bytes

eth_l3avg3_outpkts

(Optional) Load interval 3 L3 average out switched pkts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_nobuf

(Optional) No buffer received

eth_inbcast

(Optional) Broadcasts

eth_inmcast

(Optional) Multicasts

eth_inucast

(Optional) Unicasts

eth_ingiants

(Optional) giants

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_runts

(Optional) runts

eth_storm_supp

(Optional) storm suppression

eth_throtles

(Optional) throttles

eth_inerr

(Optional) input errors

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_outbcast

(Optional) Broadcasts

eth_outmcast

(Optional) Multicasts

eth_outucast

(Optional) Unicasts

eth_outgiants

(Optional) giants

eth_inpause

(Optional) pause input

eth_dribble

(Optional) input packets with dribble condition

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_underrun

(Optional) underruns

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_resets

(Optional) interface resets

eth_babbles

(Optional) babbles

eth_latecoll

(Optional) late collision

eth_deferred

(Optional) deferred

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_outpause

(Optional) PAUSE output

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_sqetest

(Optional) SQE test

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

eth_eee_atx_lpi_msec

(Optional) Tx Lpi usec

eth_eee_arcv_lpi_msec

(Optional) Rx Lpi usec

eth_eee_atx_lpi_transitions

(Optional) Tx Lpi requests

eth_eee_arcv_lpi_transitions

(Optional) Rx Lpi indications

eth_phy_ber_count

(Optional) Bit error rate counter

eth_phy_errblks_count

(Optional) Errored blocks counter

Command Mode

- /exec

show interface counters detailed cached

show interface <ifeth_ctr_dtl_all> counters detailed cached [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_ucast_pkts> ] [ <rx_mcast_pkts> ] [ <rx_bcast_pkts> ] [ <rx_octets> ] [ <tx_ucast_pkts> ] [ <tx_mcast_pkts> ] [ <tx_bcast_pkts> ] [ <tx_octets> ] [ <rxtx_pkts_64octets> ] [ <rxtx_pkts_65_127octets> ] [ <rxtx_pkts_128_255octets> ] [ <rxtx_pkts_256_511octets> ] [ <rxtx_pkts_512_1023octets> ] [ <rxtx_pkts_1024_1518octets> ] [ <rxtx_pkts_1519_1548octets> ] [ <rx_trunk_frames> ] [ <tx_trunk_frames> ] [ <rx_drop_events> ] [ <rxtx_giants> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

cached

everything cached

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

rx_total_pkts

(Optional) total input packets

tx_total_pkts

(Optional) total output packets

rx_ucast_pkts

(Optional) input unicasts

rx_mcast_pkts

(Optional) input multicasts

rx_bcast_pkts

(Optional) input broadcasts

rx_octets

(Optional) input bytes

tx_ucast_pkts

(Optional) output unicasts

tx_mcast_pkts

(Optional) output multicasts

tx_bcast_pkts

(Optional) output broadcasts

tx_octets

(Optional) output bytes

rxtx_pkts_64octets

(Optional) all pkts between 0 and 64 bytes

rxtx_pkts_65_127octets

(Optional) all pkts between 65 and 127 bytes

rxtx_pkts_128_255octets

(Optional) all pkts between 128 and 255 bytes

rxtx_pkts_256_511octets

(Optional) all pkts between 256 and 511 bytes

rxtx_pkts_512_1023octets

(Optional) all pkts between 512 and 1023 bytes

rxtx_pkts_1024_1518octets

(Optional) all pkts between 1024 and 1518 bytes

rxtx_pkts_1519_1548octets

(Optional) all pkts between 1519 and 1548 bytes

rx_trunk_frames

(Optional) input trunk pkts

tx_trunk_frames

(Optional) output trunk pkts

rx_drop_events

(Optional) dropped pkts

rxtx_giants

(Optional) giants

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) IPv4 L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) IPv4 L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) IPv4 L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) IPv4 L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) IPv4 L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) IPv4 L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) IPv4 L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) IPv4 L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_l3avg2_inbytes

(Optional) Load interval 2 L3 average in switched bytes

eth_l3avg2_inpkts

(Optional) Load interval 2 L3 average in switched pkts

eth_l3avg2_outbytes

(Optional) Load interval 2 L3 average out switched bytes

eth_l3avg2_outpkts

(Optional) Load interval 2 L3 average out switched pkts

eth_l3avg3_inbytes

(Optional) Load interval 3 L3 average in switched bytes

eth_l3avg3_inpkts

(Optional) Load interval 3 L3 average in switched pkts

eth_l3avg3_outbytes

(Optional) Load interval 3 L3 average out switched bytes

eth_l3avg3_outpkts

(Optional) Load interval 3 L3 average out switched pkts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_nobuf

(Optional) No buffer received

eth_inbcast

(Optional) Broadcasts

eth_inmcast

(Optional) Multicasts

eth_inucast

(Optional) Unicasts

eth_ingiants

(Optional) giants

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_runts

(Optional) runts

eth_storm_supp

(Optional) storm suppression

eth_throtles

(Optional) throttles

eth_inerr

(Optional) input errors

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_outbcast

(Optional) Broadcasts

eth_outmcast

(Optional) Multicasts

eth_outucast

(Optional) Unicasts

eth_outgiants

(Optional) giants

eth_inpause

(Optional) pause input

eth_dribble

(Optional) input packets with dribble condition

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_underrun

(Optional) underruns

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_resets

(Optional) interface resets

eth_babbles

(Optional) babbles

eth_latecoll

(Optional) late collision

eth_deferred

(Optional) deferred

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_outpause

(Optional) PAUSE output

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_sqetest

(Optional) SQE test

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

eth_eee_atx_lpi_msec

(Optional) Tx Lpi usec

eth_eee_arcv_lpi_msec

(Optional) Rx Lpi usec

eth_eee_atx_lpi_transitions

(Optional) Tx Lpi requests

eth_eee_arcv_lpi_transitions

(Optional) Rx Lpi indications

eth_phy_ber_count

(Optional) Bit error rate counter

eth_phy_errblks_count

(Optional) Errored blocks counter

Command Mode

- /exec

show interface counters details

show interface <ifid_ctrs_det> counters details [ __readonly__ TABLE_interface <interface> [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_ctrs_det

Enter interface type and number in module/slot format

counters

Show interface counters

details

Show interface counters in detail

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

fcoe_in_pkts

(Optional) fcoe in pkts

fcoe_in_octets

(Optional) fcoe in octets

fcoe_out_pkts

(Optional) fcoe out pkts

fcoe_out_octets

(Optional) fcoe out octets

Command Mode

- /exec

show interface counters details

show interface <ifid_ctrs_det2> counters details [ __readonly__ TABLE_ifid_counters [ <sfp> <in_frames> <in_bytes> <class_2_frames> <class_2_in_bytes> <class_2_in_discards> <class_2_in_f_bsy_frames> <class_2_in_f_rgt_frames> <class_2_in_port_reject_frames> <class_3_frames> <class_3_bytes_recv> <class_f_frames> <class_f_bytes_recv> <class_f_in_discards> <class_f_errors_recvd> <class_f_out_discards> <class_f_errors_trans> <out_frames> <out_bytes> <class_2_out_frames> <class_2_bytes_trans> <class_3_out_frames> <class_3_bytes_trans> <class_3_out_discards> <class_f_out_frames> <class_f_bytes_trans> <class_f_discards> <muticast_rcvd> <multicast_trans> <broadcast_rcvd> <broadcast_trans> <unicast_rcvd> <unicast_trans> <timeout_discards> <credit_loss> <link_faliures> <sync_loss> <signal_loss> <prm_seq_pro_err> <inv_trans_err> <inv_crc> <delim_err> <addr_iden_err> <link_reset_rcvd> <link_reset_trans> <off_seq_err_rcvd> <off_seq_err_trans> <frames_rcvd_short> <frames_rcvd_long> <txwait> <frames_rcvd_greater> <frame_rcvd_short_header> <link_reset_resp_rcvd> <link_reset_resp_trans> <non_oper_seq_rcvd> <non_oper_seq_trans> <frag_frames_rcvd> <frames_eof_abort> <unknown_class_frames_rcvd> <8b10b_disparity_err> <frames_discard> <ex_link_param_sw_fab> [ <in_link_ser_req_faliures> ] <b2b_credits_transmit> <b2b_credits_receive> <eisl_frames> <framing_err> <f8_lip_seq_err_rcvd> <f8_lip_seq_err_issued> <non_f8_lip_seq_err_rcvd> <non_f8_lip_seq_err_issued> [ <fec_corrected> ] [ <fec_uncorrected> ] ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_ctrs_det2

Enter interface type and number in module/slot format

counters

Show interface counters

details

Show interface counters in detail

__readonly__

(Optional)

TABLE_ifid_counters

(Optional) show interface counters

sfp

(Optional) SFP

in_frames

(Optional) in frames

in_bytes

(Optional) in bytes

class_2_frames

(Optional) Class 2 frames

class_2_in_bytes

(Optional) Class 2 bytes received

class_2_in_discards

(Optional) Class 2 discards received

class_2_in_f_bsy_frames

(Optional) Class 2 F_BSY frames received

class_2_in_f_rgt_frames

(Optional) Class 2 F_RGT frames

class_2_in_port_reject_frames

(Optional) Class 2 port reject frames

class_3_frames

(Optional) Class 3 frames

class_3_bytes_recv

(Optional) Class 3 bytes received

class_f_frames

(Optional) Class f frames

class_f_bytes_recv

(Optional) Class F bytes received

class_f_in_discards

(Optional) Class F in discards

class_f_errors_recvd

(Optional) Class F errors received

class_f_out_discards

(Optional) Class F out discards

class_f_errors_trans

(Optional) Class F errors transmitted

out_frames

(Optional) Out frames

out_bytes

(Optional) Out bytes

class_2_out_frames

(Optional) Class 2 frames transmitted

class_2_bytes_trans

(Optional) Class 2 bytes transmitted

class_3_out_frames

(Optional) Class 3 frames transmitted

class_3_bytes_trans

(Optional) Class 3 bytes transmitted

class_3_out_discards

(Optional) Class 3 out discards

class_f_out_frames

(Optional) Class F out frames

class_f_bytes_trans

(Optional) Class F bytes transmitted

class_f_discards

(Optional) Class F discards

muticast_rcvd

(Optional) Multicast received

multicast_trans

(Optional) Muticast transmitted

broadcast_rcvd

(Optional) Broadcast received

broadcast_trans

(Optional) Broadcast transmitted

unicast_rcvd

(Optional) Unicast received

unicast_trans

(Optional) Unicast transmitted

timeout_discards

(Optional) timeout discards

credit_loss

(Optional) credit loss

link_faliures

(Optional) Link faliures

sync_loss

(Optional) Sync Loss

signal_loss

(Optional) Signal Loss

prm_seq_pro_err

(Optional) primitive sequence protocol errors

inv_trans_err

(Optional) invaid transmission errors

inv_crc

(Optional) Invalid crc

delim_err

(Optional) Delimiter Errors

addr_iden_err

(Optional) Address Identification errors

link_reset_rcvd

(Optional) link reset received

link_reset_trans

(Optional) link reset transmitted

off_seq_err_rcvd

(Optional) Offine sequence error received

off_seq_err_trans

(Optional) Offline sequence Error transmitted

frames_rcvd_short

(Optional) frames received that are shorter than the minimum allowable frame length regardless of the CRC/FCS error

frames_rcvd_long

(Optional) frames received that are longer than the minimum allowable frame length regardless of the CRC/FCS error

txwait

(Optional) TXwait

frames_rcvd_greater

(Optional) frames received with length greater than what was agreed to in FLOGI/PLOGI

frame_rcvd_short_header

(Optional) frames received with length less than the minimum indicated by the frame header

link_reset_resp_rcvd

(Optional) Link reset responses received

link_reset_resp_trans

(Optional) Link reset responses transmitted

non_oper_seq_rcvd

(Optional) Non operational sequence received

non_oper_seq_trans

(Optional) Non operational sequence transmitted

frag_frames_rcvd

(Optional) fragmented frames received

frames_eof_abort

(Optional) frames EOF abort

unknown_class_frames_rcvd

(Optional) unknown class frames received

8b10b_disparity_err

(Optional) 8b10b disparity errors

frames_discard

(Optional) frames discard

ex_link_param_sw_fab

(Optional) external link parameters switch fabric

in_link_ser_req_faliures

(Optional) internal link serial request faliures

b2b_credits_transmit

(Optional) B2B credits transmit

b2b_credits_receive

(Optional) B2B credits receive

eisl_frames

(Optional) EISL frames

framing_err

(Optional) Framing Error

f8_lip_seq_err_rcvd

(Optional) f8 LIP sequence error received

f8_lip_seq_err_issued

(Optional) f8 LIP sequence error issued

non_f8_lip_seq_err_rcvd

(Optional) non f8 LIP sequence error received

non_f8_lip_seq_err_issued

(Optional) non f8 LIP sequence error issued

fec_corrected

(Optional) fec corrected blocks

fec_uncorrected

(Optional) fec uncorrected blocks

Command Mode

- /exec

show interface counters errors

show interface counters errors [ module <module> ] [ non-zero ] [ __readonly__ TABLE_interface <interface> [ <eth_align_err> ] [ <eth_fcs_err> ] [ <eth_xmit_err> ] [ <eth_rcv_err> ] [ <eth_undersize> ] [ <eth_outdisc> ] [ <eth_single_col> ] [ <eth_multi_col> ] [ <eth_late_col> ] [ <eth_excess_col> ] [ <eth_carri_sen> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_sqetest_err> ] [ <eth_deferred_tx> ] [ <eth_inmactx_err> ] [ <eth_inmacrx_err> ] [ <eth_symbol_err> ] [ <eth_indisc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

errors

Show interface error counters

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

non-zero

(Optional) Display only the non-zero error values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_align_err

(Optional) Align error

eth_fcs_err

(Optional) FCS error

eth_xmit_err

(Optional) Transmit error

eth_rcv_err

(Optional) Receive error

eth_undersize

(Optional) Undersize

eth_outdisc

(Optional) Out discard

eth_single_col

(Optional) Single collision

eth_multi_col

(Optional) Multiple collision

eth_late_col

(Optional) Late collision

eth_excess_col

(Optional) Excess collision

eth_carri_sen

(Optional) Carrier sense

eth_runts

(Optional) Runts

eth_giants

(Optional) Giants

eth_sqetest_err

(Optional) SQETest error

eth_deferred_tx

(Optional) Deferred tx

eth_inmactx_err

(Optional) In MAC tx

eth_inmacrx_err

(Optional) In MAC rx

eth_symbol_err

(Optional) Symbol error

eth_indisc

(Optional) In discards

Command Mode

- /exec

show interface counters errors

show interface <ifeth_ctr_errs> counters errors [ snmp ] [ __readonly__ TABLE_interface <interface> [ <eth_align_err> ] [ <eth_fcs_err> ] [ <eth_xmit_err> ] [ <eth_rcv_err> ] [ <eth_undersize> ] [ <eth_outdisc> ] [ <eth_single_col> ] [ <eth_multi_col> ] [ <eth_late_col> ] [ <eth_excess_col> ] [ <eth_carri_sen> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_sqetest_err> ] [ <eth_deferred_tx> ] [ <eth_inmactx_err> ] [ <eth_inmacrx_err> ] [ <eth_symbol_err> ] [ <eth_indisc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_errs

Enter interface type and number in module/slot format

counters

Show interface counters

errors

Show interface error counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_align_err

(Optional) Align error

eth_fcs_err

(Optional) FCS error

eth_xmit_err

(Optional) Transmit error

eth_rcv_err

(Optional) Receive error

eth_undersize

(Optional) Undersize

eth_outdisc

(Optional) Out discard

eth_single_col

(Optional) Single collision

eth_multi_col

(Optional) Multiple collision

eth_late_col

(Optional) Late collision

eth_excess_col

(Optional) Excess collision

eth_carri_sen

(Optional) Carrier sense

eth_runts

(Optional) Runts

eth_giants

(Optional) Giants

eth_sqetest_err

(Optional) SQETest error

eth_deferred_tx

(Optional) Deferred tx

eth_inmactx_err

(Optional) In MAC tx

eth_inmacrx_err

(Optional) In MAC rx

eth_symbol_err

(Optional) Symbol error

eth_indisc

(Optional) In discards

Command Mode

- /exec

show interface counters errors

show interface <loop_ctr_errs> counters errors

Syntax Description

show

Show running system information

interface

Show interface status and information

loop_ctr_errs

Enter interface type and number in module/slot format

counters

Show interface counters

errors

Show interface error counters

Command Mode

- /exec

show interface counters snmp

show interface counters snmp [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface> <eth_inpkts> [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface> <eth_outpkts> [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

snmp

Show SNMP MIB values

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

- /exec

show interface counters storm-control

show interface <ifeth_ctr_stm_ctrl> counters storm-control [ __readonly__ TABLE_interface <interface> <eth_ucast_supp> <eth_mcast_supp> <eth_bcast_supp> <eth_total_supp> <supp_action> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_stm_ctrl

Enter interface type and number in module/slot format

counters

Show interface counters

storm-control

Show interface storm-control counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_ucast_supp

(Optional) Unicast suppression percentage

eth_mcast_supp

(Optional) Multicast suppression percentage

eth_bcast_supp

(Optional) Broadcast suppression percentage

eth_total_supp

(Optional) Total discarded due to suppression

supp_action

(Optional) Action to be taken on suppression

Command Mode

- /exec

show interface counters storm-control

show interface counters storm-control [ module <module> ] [ __readonly__ TABLE_interface <interface> <eth_ucast_supp> <eth_mcast_supp> <eth_bcast_supp> <eth_total_supp> <supp_action> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

storm-control

Show interface storm-control counters

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_ucast_supp

(Optional) Unicast suppression percentage

eth_mcast_supp

(Optional) Multicast suppression percentage

eth_bcast_supp

(Optional) Broadcast suppression percentage

eth_total_supp

(Optional) Total discarded due to suppression

supp_action

(Optional) Action to be taken on suppression

Command Mode

- /exec

show interface counters table

show interface counters table [ verbose ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

table

format counters in a table

verbose

(Optional) show errors counts after counters

Command Mode

- /exec

show interface counters trunk

show interface <ifeth_ctr_trnk> counters trunk [ __readonly__ TABLE_interface <interface> [ <eth_trunk_frames_tx> ] [ <eth_trunk_frames_rx> ] [ <eth_wrong_encap> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_trnk

Enter interface type and number in module/slot format

counters

Show interface counters

trunk

Show interface trunk counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_trunk_frames_tx

(Optional) Trunk frame transmitted

eth_trunk_frames_rx

(Optional) Trunk frames received

eth_wrong_encap

(Optional) Wrong encapsulation

Command Mode

- /exec

show interface dampening

show interface dampening [ __readonly__ { [ TABLE_vrf_dampen <vrf> [ TABLE_interface_dampen <interface> <Flaps> <Penalty> <Supp> <ReuseTm> <HalfL> <ReuseV> <SuppV> <MaxSTm> <MaxP> <Restart> ] ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

dampening

Show interface dampening info

__readonly__

(Optional) Read Only

TABLE_vrf_dampen

(Optional) show interface vrf dampening

vrf

(Optional) Vrf membership

TABLE_interface_dampen

(Optional) show interface dampening

interface

(Optional) Interface index

Flaps

(Optional) Number of times that an interface has flapped

Penalty

(Optional) Accumulated penalty

Supp

(Optional) Indicates if the interface is dampened

ReuseTm

(Optional) Reuse timer

HalfL

(Optional) Half-life counter

ReuseV

(Optional) Reuse threshold timer

SuppV

(Optional) Suppress threshold

MaxSTm

(Optional) Maximum suppress

MaxP

(Optional) Maximum penalty

Restart

(Optional) Restart timer

Command Mode

- /exec

show interface debounce

show interface <ifeth_dbnc> debounce [ __readonly__ TABLE_interface <interface> <debounce> <debounce_val> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_dbnc

Enter interface type and number in module/slot format

debounce

Show interface debounce time information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

debounce

(Optional) Debounce time

debounce_val

(Optional) Value(ms)

Command Mode

- /exec

show interface debounce

show interface debounce [ __readonly__ TABLE_interface <interface> <debounce> <debounce_val> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

debounce

Show interface debounce time information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

debounce

(Optional) Debounce time

debounce_val

(Optional) Value(ms)

Command Mode

- /exec

show interface description

show interface <ifid_desc1> description [ __readonly__ TABLE_interface <interface_fc> [ <desc_fc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_desc1

Enter interface type and number in module/slot format

description

Show interface description

__readonly__

(Optional) Read Only

interface_fc

(Optional) Interface index

TABLE_interface

(Optional) show interface

desc_fc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifid> description [ __readonly__ <start> <if_index> <LINE> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

description

Interface specific description

__readonly__

(Optional) Read Only

start

(Optional) Start

if_index

(Optional) Interface

LINE

(Optional) Description

Command Mode

- /exec

show interface description

show interface description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <type> ] [ <speed> ] [ <protocol> ] [ <desc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

type

(Optional) Type

speed

(Optional) Speed

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifid_mgmt_loop> description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <protocol> ] [ <desc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_mgmt_loop

Enter interface type and number in module/slot format

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifid_eth> description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <type> ] [ <speed> ] [ <protocol> ] [ <desc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_eth

Enter interface type and number in module/slot format

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

type

(Optional) Type

speed

(Optional) Speed

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <iftun_desc> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

iftun_desc

Enter tunnel interface number

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifrange> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter tunnel interface number

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifrange> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter tunnel interface number

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface detail-counters

show interface detail-counters [ __readonly__ [ { TABLE_counters <sfp> <in_frames> <in_bytes> <class_2_frames> <class_2_in_bytes> <class_2_in_discards> <class_2_in_f_bsy_frames> <class_2_in_f_rgt_frames> <class_2_in_port_reject_frames> <class_3_frames> <class_3_bytes_recv> <class_f_frames> <class_f_bytes_recv> <class_f_in_discards> <class_f_errors_recvd> <class_f_out_discards> <class_f_errors_trans> <out_frames> <out_bytes> <class_2_out_frames> <class_2_bytes_trans> <class_3_out_frames> <class_3_bytes_trans> <class_3_out_discards> <class_f_out_frames> <class_f_bytes_trans> <class_f_discards> <muticast_rcvd> <multicast_trans> <broadcast_rcvd> <broadcast_trans> <unicast_rcvd> <unicast_trans> <timeout_discards> <credit_loss> <link_faliures> <sync_loss> <signal_loss> <prm_seq_pro_err> <inv_trans_err> <inv_crc> <delim_err> <addr_iden_err> <link_reset_rcvd> <link_reset_trans> <off_seq_err_rcvd> <off_seq_err_trans> <frames_rcvd_short> <frames_rcvd_long> <txwait> <frames_rcvd_greater> <frame_rcvd_short_header> <link_reset_resp_rcvd> <link_reset_resp_trans> <non_oper_seq_rcvd> <non_oper_seq_trans> <frag_frames_rcvd> <frames_eof_abort> <unknown_class_frames_rcvd> <8b10b_disparity_err> <frames_discard> <ex_link_param_sw_fab> [ <in_link_ser_req_faliures> ] <b2b_credits_transmit> <b2b_credits_receive> <eisl_frames> <framing_err> <f8_lip_seq_err_rcvd> <f8_lip_seq_err_issued> <non_f8_lip_seq_err_rcvd> <non_f8_lip_seq_err_issued> [ <fec_corrected> ] [ <fec_uncorrected> ] } ] [ { TABLE_interface <interface> [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] } ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

detail-counters

Show interface counters in detail

__readonly__

(Optional)

TABLE_counters

(Optional) show interface counters

sfp

(Optional) SFP

in_frames

(Optional) in frames

in_bytes

(Optional) in bytes

class_2_frames

(Optional) Class 2 frames

class_2_in_bytes

(Optional) Class 2 bytes received

class_2_in_discards

(Optional) Class 2 discards received

class_2_in_f_bsy_frames

(Optional) Class 2 F_BSY frames received

class_2_in_f_rgt_frames

(Optional) Class 2 F_RGT frames

class_2_in_port_reject_frames

(Optional) Class 2 port reject frames

class_3_frames

(Optional) Class 3 frames

class_3_bytes_recv

(Optional) Class 3 bytes received

class_f_frames

(Optional) Class f frames

class_f_bytes_recv

(Optional) Class F bytes received

class_f_in_discards

(Optional) Class F in discards

class_f_errors_recvd

(Optional) Class F errors received

class_f_out_discards

(Optional) Class F out discards

class_f_errors_trans

(Optional) Class F errors transmitted

out_frames

(Optional) Out frames

out_bytes

(Optional) Out bytes

class_2_out_frames

(Optional) Class 2 frames transmitted

class_2_bytes_trans

(Optional) Class 2 bytes transmitted

class_3_out_frames

(Optional) Class 3 frames transmitted

class_3_bytes_trans

(Optional) Class 3 bytes transmitted

class_3_out_discards

(Optional) Class 3 out discards

class_f_out_frames

(Optional) Class F out frames

class_f_bytes_trans

(Optional) Class F bytes transmitted

class_f_discards

(Optional) Class F discards

muticast_rcvd

(Optional) Multicast received

multicast_trans

(Optional) Muticast transmitted

broadcast_rcvd

(Optional) Broadcast received

broadcast_trans

(Optional) Broadcast transmitted

unicast_rcvd

(Optional) Unicast received

unicast_trans

(Optional) Unicast transmitted

timeout_discards

(Optional) timeout discards

credit_loss

(Optional) credit loss

link_faliures

(Optional) Link faliures

sync_loss

(Optional) Sync Loss

signal_loss

(Optional) Signal Loss

prm_seq_pro_err

(Optional) primitive sequence protocol errors

inv_trans_err

(Optional) invaid transmission errors

inv_crc

(Optional) Invalid crc

delim_err

(Optional) Delimiter Errors

addr_iden_err

(Optional) Address Identification errors

link_reset_rcvd

(Optional) link reset received

link_reset_trans

(Optional) link reset transmitted

off_seq_err_rcvd

(Optional) Offine sequence error received

off_seq_err_trans

(Optional) Offline sequence Error transmitted

frames_rcvd_short

(Optional) frames received that are shorter than the minimum allowable frame length regardless of the CRC/FCS error

frames_rcvd_long

(Optional) frames received that are longer than the minimum allowable frame length regardless of the CRC/FCS error

txwait

(Optional) TXwait

frames_rcvd_greater

(Optional) frames received with length greater than what was agreed to in FLOGI/PLOGI

frame_rcvd_short_header

(Optional) frames received with length less than the minimum indicated by the frame header

link_reset_resp_rcvd

(Optional) Link reset responses received

link_reset_resp_trans

(Optional) Link reset responses transmitted

non_oper_seq_rcvd

(Optional) Non operational sequence received

non_oper_seq_trans

(Optional) Non operational sequence transmitted

frag_frames_rcvd

(Optional) fragmented frames received

frames_eof_abort

(Optional) frames EOF abort

unknown_class_frames_rcvd

(Optional) unknown class frames received

8b10b_disparity_err

(Optional) 8b10b disparity errors

frames_discard

(Optional) frames discard

ex_link_param_sw_fab

(Optional) external link parameters switch fabric

in_link_ser_req_faliures

(Optional) internal link serial request faliures

b2b_credits_transmit

(Optional) B2B credits transmit

b2b_credits_receive

(Optional) B2B credits receive

eisl_frames

(Optional) EISL frames

framing_err

(Optional) Framing Error

f8_lip_seq_err_rcvd

(Optional) f8 LIP sequence error received

f8_lip_seq_err_issued

(Optional) f8 LIP sequence error issued

non_f8_lip_seq_err_rcvd

(Optional) non f8 LIP sequence error received

non_f8_lip_seq_err_issued

(Optional) non f8 LIP sequence error issued

fec_corrected

(Optional) fec corrected blocks

fec_uncorrected

(Optional) fec uncorrected blocks

TABLE_interface

(Optional) interface

interface

(Optional) interface

fcoe_in_pkts

(Optional) fcoe in pkts

fcoe_in_octets

(Optional) fcoe in octets

fcoe_out_pkts

(Optional) fcoe out pkts

fcoe_out_octets

(Optional) fcoe out octets

Command Mode

- /exec

show interface fcoe

show interface <ifeth_fcoe> fcoe [ __readonly__ TABLE_interface <interface> [ <state> ] [ <vfc> ] [ <vfc_bound> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_fcoe

Enter interface type and number in module/slot format

fcoe

Show interface fcoe information

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

state

(Optional) State of interface

vfc

(Optional) VFC

vfc_bound

(Optional) Binding information

Command Mode

- /exec

show interface fec

show interface fec

Syntax Description

show

Show running system information

interface

Interface

fec

Show fec admin and operation state on physical interface

Command Mode

- /exec

show interface flowcontrol

show interface flowcontrol [ module <module> ] [ __readonly__ TABLE_interface <interface> <send_admin> <send_oper> <recv_admin> <recv_oper> <rxpause> <txpause> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

flowcontrol

Show interface flowcontrol information

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

send_admin

(Optional) Send flowcontrol admin

send_oper

(Optional) Send flowcontrol oper

recv_admin

(Optional) Receive flowcontrol admin

recv_oper

(Optional) Receive flowcontrol oper

rxpause

(Optional) RxPause

txpause

(Optional) TxPause

Command Mode

- /exec

show interface flowcontrol

show interface <ifeth_fl_ctrl> flowcontrol [ __readonly__ TABLE_interface <interface> <send_admin> <send_oper> <recv_admin> <recv_oper> <rxpause> <txpause> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_fl_ctrl

Enter interface type and number in module/slot format

flowcontrol

Show interface flowcontrol information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

send_admin

(Optional) Send flowcontrol admin

send_oper

(Optional) Send flowcontrol oper

recv_admin

(Optional) Receive flowcontrol admin

recv_oper

(Optional) Receive flowcontrol oper

rxpause

(Optional) RxPause

txpause

(Optional) TxPause

Command Mode

- /exec

show interface hardware-mappings

show interface hardware-mappings [ json ]

Syntax Description

show

Show running system information

interface

Interface

hardware-mappings

Show hardware port number and unit information for interfaces

json

(Optional) display the output in json format

Command Mode

- /exec

show interface mac-address

show interface mac-address [ __readonly__ TABLE_interface <interface> <address> <bia_address> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

mac-address

Show interface MAC address

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

address

(Optional) MAC Address

bia_address

(Optional) Burn-In MAC Address

Command Mode

- /exec

show interface mac-address

show interface <ifid_macaddr> mac-address [ __readonly__ TABLE_interface <interface> <address> <bia_address> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_macaddr

Enter interface type and number in module/slot format

mac-address

Show interface MAC address

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

address

(Optional) MAC Address

bia_address

(Optional) Burn-In MAC Address

Command Mode

- /exec

show interface priority-flow-control

show interface [ <if_list> ] priority-flow-control [ detail ] [ module <module> ] [ __readonly__ [ TABLE_pfc_interface <if_name_str> <admin> <oper> [ <cos-list> ] <rx-stats> <tx-stats> [ <rx_ppp_cos_0> ] [ <rx_ppp_cos_1> ] [ <rx_ppp_cos_2> ] [ <rx_ppp_cos_3> ] [ <rx_ppp_cos_4> ] [ <rx_ppp_cos_5> ] [ <rx_ppp_cos_6> ] [ <rx_ppp_cos_7> ] [ <tx_ppp_cos_0> ] [ <tx_ppp_cos_1> ] [ <tx_ppp_cos_2> ] [ <tx_ppp_cos_3> ] [ <tx_ppp_cos_4> ] [ <tx_ppp_cos_5> ] [ <tx_ppp_cos_6> ] [ <tx_ppp_cos_7> ] ] ]

Syntax Description

show

commands to display

interface

Interface for displaying pfc information

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

priority-flow-control

Show interface PFC information

detail

(Optional) Show detailed per priority Tx/Rx PFC statistics

__readonly__

(Optional)

if_name_str

(Optional) interface name

TABLE_pfc_interface

(Optional) PFC information of an interface

admin

(Optional) PFC admin

oper

(Optional) PFC oper

cos-list

(Optional) List of class-of-service values

Command Mode

- /exec

show interface private-vlan mapping

show interface [ <if> ] private-vlan mapping [ __readonly__ [ <output-filtered> ] [ { TABLE_interf_mapp <interface-id> [ <secondary-vlan> + ] [ <pvlan-type> ] } ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

if

(Optional) Vlan Interface number

private-vlan

Show interface private vlan information

mapping

Show interface private vlan information

__readonly__

(Optional) Read Only

output-filtered

(Optional) the output is filtered for specified ifs

TABLE_interf_mapp

(Optional) Pvlan interface mapping table

interface-id

(Optional) Interface

secondary-vlan

(Optional) Secondary Vlan

pvlan-type

(Optional) PVLAN Type

Command Mode

- /exec

show interface pruning

show interface pruning [ __readonly__ <start> { TABLE_interface_pruning1 <if_index1> <rx_join> } { TABLE_interface_pruning2 <if_index2> <cur_join> } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

pruning

Show interface trunk VTP pruning information

__readonly__

(Optional) Read Only

start

(Optional) Start

TABLE_interface_pruning1

(Optional) Interface pruning information in table format

if_index1

(Optional) Trunk

rx_join

(Optional) Vlans pruned for lack of request by neighbor

TABLE_interface_pruning2

(Optional) Interface pruning information in table format

if_index2

(Optional) Trunk

cur_join

(Optional) Vlan traffic requested of neighbor

Command Mode

- /exec

show interface snmp-ifindex

show interface snmp-ifindex [ __readonly__ TABLE_interface <interface> <snmp-ifindex> [ <ifindex-hex> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

snmp-ifindex

Show snmp ifindex list

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

ifindex-hex

(Optional) If Index in Hex

snmp-ifindex

(Optional) If Index in Dec

Command Mode

- /exec

show interface status

show interface <ifrange> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> <admin_state> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter tunnel interface number

status

Show interface line status

err-disabled

(Optional) Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

admin_state

(Optional) admin state

Command Mode

- /exec

show interface status

show interface <ifid> status [ __readonly__ <start> <if_index> <admin-state> <line-proto> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

status

Interface status

__readonly__

(Optional) Read Only

start

(Optional) Start

if_index

(Optional) Interface

admin-state

(Optional)

line-proto

(Optional)

Command Mode

- /exec

show interface status

show interface status [ down | inactive | module <module> | up | auto-column ] [ __readonly__ TABLE_interface <interface> [ <name> ] [ <state> ] [ <state_san> ] [ <state_rsn> ] [ <vlan> ] [ <duplex> ] [ <speed> ] [ <type> ] [ <admin_mode> ] [ <vsan> ] [ <bind_info> ] [ <bind_type> ] [ <bind_mac> ] [ <oper_speed> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

status

Show interface line status

down

(Optional) Show interface down state

inactive

(Optional) Show interface inactive state

auto-column

(Optional) Show interface status auto-column adjusted

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

up

(Optional) Show interface up state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_san

(Optional) SAN Port State

vlan

(Optional) Vlan

vsan

(Optional) Vsan

duplex

(Optional) Duplex

speed

(Optional) Speed

type

(Optional) Type

state_rsn

(Optional) Port State Reason

bind_info

(Optional) bind interface

bind_type

(Optional) bind type

bind_mac

(Optional) bind mac

oper_speed

(Optional) speed

admin_mode

(Optional) admin mode

Command Mode

- /exec

show interface status

show interface <ifid_status> status [ __readonly__ TABLE_interface <interface> [ <name> ] [ <state> ] [ <vlan> ] [ <duplex> ] [ <speed> ] [ <type> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_status

Enter interface type and number in module/slot format

status

Show interface line status

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

vlan

(Optional) Vlan

duplex

(Optional) Duplex

speed

(Optional) Speed

type

(Optional) Type

Command Mode

- /exec

show interface status

show interface <ifeth_status> status [ __readonly__ TABLE_interface <interface> [ <name> ] [ <state> ] [ <vlan> ] <duplex> <speed> [ <type> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_status

Enter interface type and number in module/slot format

status

Show interface line status

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

vlan

(Optional) Vlan

duplex

(Optional) Duplex

speed

(Optional) Speed

type

(Optional) Type

Command Mode

- /exec

show interface status

show interface <iftun_status> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

iftun_status

Enter tunnel interface number

status

Show interface line status

err-disabled

(Optional) Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface status

show interface <ifrange> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter tunnel interface number

status

Show interface line status

err-disabled

(Optional) Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface status err-disabled

show interface status err-disabled [ __readonly__ TABLE_interface <interface> [ <name> ] <state> [ <state_rsn> ] [ <state_rsn_desc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

status

Show interface line status

err-disabled

Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface status err-disabled

show interface <ifeth_errdis> status err-disabled [ __readonly__ TABLE_interface <interface> [ <name> ] <state> [ <state_rsn> ] [ <state_rsn_desc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

status

Show interface line status

ifeth_errdis

Enter interface type and number in module/slot format

err-disabled

Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface status err-vlans

show interface status err-vlans [ __readonly__ TABLE_interface <interface> [ <name> ] { TABLE_vlan <err_vlan> <err_vlan_status> <err_vlan_syserr> } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

status

Show interface line status

err-vlans

Show errored vlans

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

TABLE_vlan

(Optional) show vlan

err_vlan

(Optional) Errored vlan

err_vlan_status

(Optional) Errored vlan status

err_vlan_syserr

(Optional) Errored vlan syserr name

Command Mode

- /exec

show interface status err-vlans

show interface <ifeth_errvlans> status err-vlans [ __readonly__ TABLE_interface <interface> [ <name> ] [ { TABLE_vlan [ <err_vlan> ] [ <err_vlan_status> ] [ <err_vlan_syserr> ] } ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_errvlans

Enter interface type and number in module/slot format

status

Show interface line status

err-vlans

Show errored vlans

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

TABLE_vlan

(Optional) show vlan

err_vlan

(Optional) Errored vlan

err_vlan_status

(Optional) Errored vlan status

err_vlan_syserr

(Optional) Errored vlan syserr name

Command Mode

- /exec

show interface switchport

show interface <ifeth_swtch> switchport [ __readonly__ TABLE_interface <interface> <switchport> [ <switchport_monitor> ] [ <switchport_isolated> ] [ <switchport_block_multicast> ] [ <switchport_block_unicast> ] [ <oper_mode> ] [ <access_vlan> ] [ <access_vlan_name> ] [ <native_vlan> ] [ <native_vlan_name> ] [ <trunk_vlans> ] [ <fabricpath_topologies> ] [ <pruning_vlans> ] [ <voice_vlan> ] [ <voice_vlan_name> ] [ <extended_trust> ] [ <extended_trust_name> ] [ <admin_pvlan_pri_assoc> ] [ <admin_pvlan_sec_assoc> ] [ <admin_pvlan_pri_mapping> ] [ <admin_pvlan_sec_mapping> ] [ <admin_pvlan_trunk_native> ] [ <admin_pvlan_trunk_encap> ] [ <admin_pvlan_trunk_normal> ] [ <admin_pvlan_trunk_private> ] [ <oper_pvlan> ] [ <autostate_mode> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_swtch

Enter interface type and number in module/slot format

switchport

Show interface switchport information

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

switchport

(Optional) Switchport enabled

switchport_monitor

(Optional) Switchport monitor enabled

switchport_isolated

(Optional) Switchport isolated enabled

switchport_block_multicast

(Optional) Switchport monitor enabled

switchport_block_unicast

(Optional) Switchport monitor enabled

oper_mode

(Optional) Operational mode

access_vlan

(Optional) Access mode VLAN

access_vlan_name

(Optional) Access mode VLAN name

native_vlan

(Optional) Trunking native mode VLAN

native_vlan_name

(Optional) Trunking native mode VLAN name

trunk_vlans

(Optional) Trunking VLANs Allowed

fabricpath_topologies

(Optional) FabricPath Topologies Allowed

pruning_vlans

(Optional) Pruning eligible VLANs

voice_vlan

(Optional) Voice VLAN

voice_vlan_name

(Optional) Voice VLAN name

extended_trust

(Optional) Extended Trust

extended_trust_name

(Optional) Extended Trust name

admin_pvlan_pri_assoc

(Optional) Administrative private-vlan primary host-association

admin_pvlan_sec_assoc

(Optional) Administrative private-vlan secondary host-association

admin_pvlan_pri_mapping

(Optional) Administrative private-vlan primary mapping

admin_pvlan_sec_mapping

(Optional) Administrative private-vlan secondary mapping

admin_pvlan_trunk_native

(Optional) Administrative private-vlan trunk native VLAN

admin_pvlan_trunk_encap

(Optional) Administrative private-vlan trunk encapsulation

admin_pvlan_trunk_normal

(Optional) Administrative private-vlan trunk normal VLANs

admin_pvlan_trunk_private

(Optional) Administrative private-vlan trunk private VLANs

oper_pvlan

(Optional) Operational private-vlan

autostate_mode

(Optional) SVI Autostate Exclude Info

Command Mode

- /exec

show interface switchport

show interface switchport [ __readonly__ TABLE_interface <interface> <switchport> [ <switchport_monitor> ] [ <switchport_isolated> ] [ <switchport_block_multicast> ] [ <switchport_block_unicast> ] [ <mac_learning> ] [ <oper_mode> ] [ <access_vlan> ] [ <access_vlan_name> ] [ <native_vlan> ] [ <native_vlan_name> ] [ <trunk_vlans> ] [ <fabricpath_topologies> ] [ <pruning_vlans> ] [ <voice_vlan> ] [ <voice_vlan_name> ] [ <extended_trust> ] [ <extended_trust_name> ] [ <admin_pvlan_pri_assoc> ] [ <admin_pvlan_sec_assoc> ] [ <admin_pvlan_pri_mapping> ] [ <admin_pvlan_sec_mapping> ] [ <admin_pvlan_trunk_native> ] [ <admin_pvlan_trunk_encap> ] [ <admin_pvlan_trunk_normal> ] [ <admin_pvlan_trunk_private> ] [ <oper_pvlan> ] [ <autostate_mode> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

switchport

Show interface switchport information

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

switchport

(Optional) Switchport enabled

switchport_monitor

(Optional) Switchport monitor enabled

switchport_isolated

(Optional) Switchport isolated enabled

mac_learning

(Optional) Mac learning enabled/disabled

switchport_block_multicast

(Optional) Switchport monitor enabled

switchport_block_unicast

(Optional) Switchport monitor enabled

oper_mode

(Optional) Operational mode

access_vlan

(Optional) Access mode VLAN

access_vlan_name

(Optional) Access mode VLAN name

native_vlan

(Optional) Trunking native mode VLAN

native_vlan_name

(Optional) Trunking native mode VLAN name

trunk_vlans

(Optional) Trunking VLANs Allowed

fabricpath_topologies

(Optional) FabricPath Topologies Allowed

pruning_vlans

(Optional) Pruning eligible VLANs

voice_vlan

(Optional) Voice VLAN

voice_vlan_name

(Optional) Voice VLAN name

extended_trust

(Optional) Extended Trust

extended_trust_name

(Optional) Extended Trust name

admin_pvlan_pri_assoc

(Optional) Administrative private-vlan primary host-association

admin_pvlan_sec_assoc

(Optional) Administrative private-vlan secondary host-association

admin_pvlan_pri_mapping

(Optional) Administrative private-vlan primary mapping

admin_pvlan_sec_mapping

(Optional) Administrative private-vlan secondary mapping

admin_pvlan_trunk_native

(Optional) Administrative private-vlan trunk native VLAN

admin_pvlan_trunk_encap

(Optional) Administrative private-vlan trunk encapsulation

admin_pvlan_trunk_normal

(Optional) Administrative private-vlan trunk normal VLANs

admin_pvlan_trunk_private

(Optional) Administrative private-vlan trunk private VLANs

oper_pvlan

(Optional) Operational private-vlan

autostate_mode

(Optional) SVI Autostate Exclude Info

Command Mode

- /exec

show interface switchport backup

show interface switchport backup [ detail ] [ __readonly__ { TABLE_pair <ai_name> <bi_name> <ai_state> <bi_state> <ai_prefer> <bi_prefer> <preempt_mode> <delay_value> <delay_default> <delay_scheduled> <mcast_fast> <ai_bw> <ai_bw_name> <bi_bw> <bi_bw_name> <mmu_primary> } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

switchport

Show interface switchport information

backup

Show interface backup

detail

(Optional) Backup interface info in detail

__readonly__

(Optional) Read Only

TABLE_pair

(Optional) Show interface backup

ai_name

(Optional) Active Interface name

bi_name

(Optional) Backup Interface name

ai_state

(Optional) Active Interface state

bi_state

(Optional) Backup Interface state

ai_prefer

(Optional) Active Interface prefer VLANs

bi_prefer

(Optional) Backup Interface prefer VLANs

preempt_mode

(Optional) Preempt mode

delay_value

(Optional) Preempt delay

delay_default

(Optional) Preempt delay value is default

delay_scheduled

(Optional) Preemption has been scheduled

mcast_fast

(Optional) Multicast Fast-Convergence

ai_bw

(Optional) Active Interface bandwidth

ai_bw_name

(Optional) Active Interface name for bandwidth

bi_bw

(Optional) Backup Interface bandwidth

bi_bw_name

(Optional) Backup Interface name for bandwidth

mmu_primary

(Optional) MAC Move Update primary VLAN

Command Mode

- /exec

show interface transceiver

show interface transceiver [ calibrations | details ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_9> ] [ <len_50> ] [ <len_625> ] [ <len_cu> ] [ <len_50_OM3> ] [ <txcvr_type> ] [ <connector_type> ] [ <bit_encoding> ] [ <protocol_type> ] [ <10gbe_code> ] [ <fiber_type_byte0> ] [ <fiber_type_byte1> ] [ <tx_type> ] [ <tx_len> ] [ <tx_medium> ] [ <tx_speeds> ] [ <tx_range> ] [ <cable_type> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <cisco_part_number> ] [ <cisco_product_id> ] [ <cisco_vendor_id> ] [ <cisco_ext_id> ] [ <info_not_available> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ TABLE_lane [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

transceiver

Show interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp

(Optional) sfp

type

(Optional) type

name

(Optional) Name

partnum

(Optional) part number

rev

(Optional) revision

serialnum

(Optional) serial number

nom_bitrate

(Optional) Nominal bit rate in MBits/sec

len_9

(Optional) Link length supported for 9/125um fiber

len_50

(Optional) Link length supported for 50/125um fiber

len_625

(Optional) Link length supported for 62.5/125um fiber

len_cu

(Optional) Link length supported for copper

len_50_OM3

(Optional) Link length supported for 50/125um fiber in m

txcvr_type

(Optional)

connector_type

(Optional)

bit_encoding

(Optional)

protocol_type

(Optional)

10gbe_code

(Optional)

fiber_type_byte0

(Optional)

fiber_type_byte1

(Optional)

tx_type

(Optional) FC Transmitter type

tx_len

(Optional) FC Transmitter length

tx_medium

(Optional) FC Transmitter medium

tx_speeds

(Optional) Transmission speeds

tx_range

(Optional) Transmission range

cable_type

(Optional)

ciscoid

(Optional) Cisco extended id

ciscoid_1

(Optional) Cisco extended id number

cisco_part_number

(Optional) Cisco part number

cisco_product_id

(Optional) Cisco product identifier

cisco_vendor_id

(Optional) Cisco vendor identifier

cisco_ext_id

(Optional) Cisco extended ID

info_not_available

(Optional) No info available for this transceiver

temp_slope

(Optional) Temperature slope

temp_offset

(Optional) Temperature offset

volt_slope

(Optional) Voltage slope

volt_offset

(Optional) Voltage offset

curr_slope

(Optional) Current slope

curr_offset

(Optional) Current offset

tx_pwr_slope

(Optional) Tx power slope

tx_pwr_offset

(Optional) Tx power offset

rx_pwr_4

(Optional) Rx power 4

rx_pwr_3

(Optional) Rx power 3

rx_pwr_2

(Optional) Rx power 2

rx_pwr_1

(Optional) Rx power 1

rx_pwr_0

(Optional) Rx power 0

TABLE_lane

(Optional) show lane

lane_number

(Optional) Lane number

temperature

(Optional) Temperature

temp_flag

(Optional) Temperature Flag

temp_alrm_hi

(Optional) Temperature Alarm High

temp_alrm_lo

(Optional) Temperature Alarm Low

temp_warn_hi

(Optional) Temperature Warning High

temp_warn_lo

(Optional) Temperature Warning Low

voltage

(Optional) Voltage

volt_flag

(Optional) Voltage Flag

volt_alrm_hi

(Optional) Voltage Alarm High

volt_alrm_lo

(Optional) Voltage Alarm Low

volt_warn_hi

(Optional) Voltage Warning High

volt_warn_lo

(Optional) Voltage Warning Low

current

(Optional) Current

current_flag

(Optional) Current Flag

current_alrm_hi

(Optional) Current Alarm High

current_alrm_lo

(Optional) Current Alarm Low

current_warn_hi

(Optional) Current Warning High

current_warn_lo

(Optional) Current Warning Low

tx_pwr

(Optional) Tx Power

tx_pwr_flag

(Optional) Tx Power Flag

tx_pwr_alrm_hi

(Optional) Tx Power Alarm High

tx_pwr_alrm_lo

(Optional) Tx Power Alarm Low

tx_pwr_warn_hi

(Optional) Tx Power Warning High

tx_pwr_warn_lo

(Optional) Tx Power Warning Low

rx_pwr

(Optional) Rx Power

rx_pwr_flag

(Optional) Rx Power Flag

rx_pwr_alrm_hi

(Optional) Rx Power Alarm High

rx_pwr_alrm_lo

(Optional) Rx Power Alarm Low

rx_pwr_warn_hi

(Optional) Rx Power Warning High

rx_pwr_warn_lo

(Optional) Rx Power Warning Low

xmit_faults

(Optional) Transmit Fault Count

snr

(Optional) RX Signal-to-Noise Ratio (SNR)

snr_flag

(Optional) SNR Flag

snr_alrm_hi

(Optional) SNR Alarm High

snr_alrm_lo

(Optional) SNR Alarm Low

snr_warn_hi

(Optional) SNR Warning High

snr_warn_lo

(Optional) SNR Warning Low

isi

(Optional) Residual-Dispersion(ISI)

isi_flag

(Optional) ISI Flag

isi_alrm_hi

(Optional) ISI alarm high

isi_alrm_lo

(Optional) ISI alarm low

isi_warn_hi

(Optional) ISI warning high

isi_warn_lo

(Optional) ISI warning low

pam

(Optional) PAM Transition

pam_flag

(Optional) PAM Flag

pam_alrm_hi

(Optional) PAM alarm high

pam_alrm_lo

(Optional) PAM alarm low

pam_warn_hi

(Optional) PAM warning high

pam_warn_lo

(Optional) PAM warning low

pre_fec_ber

(Optional) Pre-FEC BER

pre_fec_ber_flag

(Optional) Pre-FEC BER flag

pre_fec_ber_alrm_hi

(Optional) Pre-FEC BER alarm high

pre_fec_ber_alrm_lo

(Optional) Pre-FEC BER alarm low

pre_fec_ber_warn_hi

(Optional) Pre-FEC BER warning high

pre_fec_ber_warn_lo

(Optional) Pre-FEC BER warning low

uncorrect_ber

(Optional) Uncorrected BER

uncorrect_ber_flag

(Optional) Uncorrected BER flag

uncorrect_ber_alrm_hi

(Optional) Uncorrected BER alarm high

uncorrect_ber_alrm_lo

(Optional) Uncorrected BER alarm low

uncorrect_ber_warn_hi

(Optional) Uncorrected BER warning high

uncorrect_ber_warn_lo

(Optional) Uncorrected BER warning low

tec_current

(Optional) TEC Current

tec_current_flag

(Optional) TEC Current flag

tec_current_alrm_hi

(Optional) TEC Current Alarm High

tec_current_alrm_lo

(Optional) TEC Current Alarm Low

tec_current_warn_hi

(Optional) TEC Current Warning High

tec_current_warn_lo

(Optional) TEC Current Warning Low

laser_freq

(Optional) Laser Frequency

laser_freq_flag

(Optional) Laser Frequency flag

laser_freq_alrm_hi

(Optional) Laser Frequency Alarm High

laser_freq_alrm_lo

(Optional) Laser Frequency Alarm Low

laser_freq_warn_hi

(Optional) Laser Frequency Warning High

laser_freq_warn_lo

(Optional) Laser Frequency Warning Low

laser_temp

(Optional) Laser Temperature

laser_temp_flag

(Optional) Laser Temperature flag

laser_temp_alrm_hi

(Optional) Laser Temperature Alarm High

laser_temp_alrm_lo

(Optional) Laser Temperature Alarm Low

laser_temp_warn_hi

(Optional) Laser Temperature Warning High

laser_temp_warn_lo

(Optional) Laser Temperature Warning Low

pre_fec_ber_acc

(Optional) Pre-FEC BER Acc

pre_fec_ber_acc_flag

(Optional) Pre-FEC BER Acc flag

pre_fec_ber_acc_alrm_hi

(Optional) Pre-FEC BER Acc alarm high

pre_fec_ber_acc_alrm_lo

(Optional) Pre-FEC BER Acc alarm low

pre_fec_ber_acc_warn_hi

(Optional) Pre-FEC BER Acc warning high

pre_fec_ber_acc_warn_lo

(Optional) Pre-FEC BER Acc warning low

pre_fec_ber_min

(Optional) Pre-FEC BER Min

pre_fec_ber_min_flag

(Optional) Pre-FEC BER Min flag

pre_fec_ber_min_alrm_hi

(Optional) Pre-FEC BER Min alarm high

pre_fec_ber_min_alrm_lo

(Optional) Pre-FEC BER Min alarm low

pre_fec_ber_min_warn_hi

(Optional) Pre-FEC BER Min warning high

pre_fec_ber_min_warn_lo

(Optional) Pre-FEC BER Min warning low

pre_fec_ber_max

(Optional) Pre-FEC BER Max

pre_fec_ber_max_flag

(Optional) Pre-FEC BER Max flag

pre_fec_ber_max_alrm_hi

(Optional) Pre-FEC BER Max alarm high

pre_fec_ber_max_alrm_lo

(Optional) Pre-FEC BER Max alarm low

pre_fec_ber_max_warn_hi

(Optional) Pre-FEC BER Max warning high

pre_fec_ber_max_warn_lo

(Optional) Pre-FEC BER Max warning low

pre_fec_ber_cur

(Optional) Pre-FEC BER Cur

pre_fec_ber_cur_flag

(Optional) Pre-FEC BER Cur flag

pre_fec_ber_cur_alrm_hi

(Optional) Pre-FEC BER Cur alarm high

pre_fec_ber_cur_alrm_lo

(Optional) Pre-FEC BER Cur alarm low

pre_fec_ber_cur_warn_hi

(Optional) Pre-FEC BER Cur warning high

pre_fec_ber_cur_warn_lo

(Optional) Pre-FEC BER Cur warning low

uncorrect_ber_acc

(Optional) Uncorrected BER Acc

uncorrect_ber_acc_flag

(Optional) Uncorrected BER Acc flag

uncorrect_ber_acc_alrm_hi

(Optional) Uncorrected BER Acc alarm high

uncorrect_ber_acc_alrm_lo

(Optional) Uncorrected BER Acc alarm low

uncorrect_ber_acc_warn_hi

(Optional) Uncorrected BER Acc warning high

uncorrect_ber_acc_warn_lo

(Optional) Uncorrected BER Acc warning low

uncorrect_ber_min

(Optional) Uncorrected BER Min

uncorrect_ber_min_flag

(Optional) Uncorrected BER Min flag

uncorrect_ber_min_alrm_hi

(Optional) Uncorrected BER Min alarm high

uncorrect_ber_min_alrm_lo

(Optional) Uncorrected BER Min alarm low

uncorrect_ber_min_warn_hi

(Optional) Uncorrected BER Min warning high

uncorrect_ber_min_warn_lo

(Optional) Uncorrected BER Min warning low

uncorrect_ber_max

(Optional) Uncorrected BER Max

uncorrect_ber_max_flag

(Optional) Uncorrected BER Max flag

uncorrect_ber_max_alrm_hi

(Optional) Uncorrected BER Max alarm high

uncorrect_ber_max_alrm_lo

(Optional) Uncorrected BER Max alarm low

uncorrect_ber_max_warn_hi

(Optional) Uncorrected BER Max warning high

uncorrect_ber_max_warn_lo

(Optional) Uncorrected BER Max warning low

uncorrect_ber_cur

(Optional) Uncorrected BER Cur

uncorrect_ber_cur_flag

(Optional) Uncorrected BER Cur flag

uncorrect_ber_cur_alrm_hi

(Optional) Uncorrected BER Cur alarm high

uncorrect_ber_cur_alrm_lo

(Optional) Uncorrected BER Cur alarm low

uncorrect_ber_cur_warn_hi

(Optional) Uncorrected BER Cur warning high

uncorrect_ber_cur_warn_lo

(Optional) Uncorrected BER Cur warning low

Command Mode

- /exec

show interface transceiver

show interface <ifid_trns_fc> transceiver [ calibrations | details ] [ __readonly__ TABLE_interface <interface_fc> [ <sfp_fc> ] [ <type_fc> ] [ <name_fc> ] [ <partnum_fc> ] [ <rev_fc> ] [ <serialnum_fc> ] [ <cisco_partnum_fc> ] [ <cisco_pid_fc> ] [ <tx_type_fc> ] [ <tx_len_fc> ] [ <tx_medium_fc> ] [ <tx_speeds_fc> ] [ <nom_bitrate_fc> ] [ <len_9_fc> ] [ <len_50_fc> ] [ <len_625_fc> ] [ <len_50_OM3_fc> ] [ <cisco_ext_id_fc> ] [ <txcvr_type_fc> ] [ <connector_type_fc> ] [ <bit_encoding_fc> ] [ <protocol_type_fc> ] [ <10gbe_code_fc> ] [ <fiber_type_byte0_fc> ] [ <fiber_type_byte1_fc> ] [ <tx_range_fc> ] [ <temp_slope_fc> ] [ <temp_offset_fc> ] [ <volt_slope_fc> ] [ <volt_offset_fc> ] [ <curr_slope_fc> ] [ <curr_offset_fc> ] [ <tx_pwr_slope_fc> ] [ <tx_pwr_offset_fc> ] [ <rx_pwr_4_fc> ] [ <rx_pwr_3_fc> ] [ <rx_pwr_2_fc> ] [ <rx_pwr_1_fc> ] [ <rx_pwr_0_fc> ] [ <temperature_fc> ] [ <temp_flag_fc> ] [ <temp_alrm_hi_fc> ] [ <temp_alrm_lo_fc> ] [ <temp_warn_hi_fc> ] [ <temp_warn_lo_fc> ] [ <voltage_fc> ] [ <volt_flag_fc> ] [ <volt_alrm_hi_fc> ] [ <volt_alrm_lo_fc> ] [ <volt_warn_hi_fc> ] [ <volt_warn_lo_fc> ] [ <current_fc> ] [ <current_flag_fc> ] [ <current_alrm_hi_fc> ] [ <current_alrm_lo_fc> ] [ <current_warn_hi_fc> ] [ <current_warn_lo_fc> ] [ <tx_pwr_fc> ] [ <tx_pwr_flag_fc> ] [ <tx_pwr_alrm_hi_fc> ] [ <tx_pwr_alrm_lo_fc> ] [ <tx_pwr_warn_hi_fc> ] [ <tx_pwr_warn_lo_fc> ] [ <rx_pwr_fc> ] [ <rx_pwr_flag_fc> ] [ <rx_pwr_alrm_hi_fc> ] [ <rx_pwr_alrm_lo_fc> ] [ <rx_pwr_warn_hi_fc> ] [ <rx_pwr_warn_lo_fc> ] [ <xmit_faults_fc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_trns_fc

Enter interface type and number in module/slot format

transceiver

Show interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

__readonly__

(Optional) Read Only

interface_fc

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp_fc

(Optional) sfp

type_fc

(Optional) type

name_fc

(Optional) Name

partnum_fc

(Optional) part number

rev_fc

(Optional) revision

serialnum_fc

(Optional) serial number

cisco_partnum_fc

(Optional) Cisco part number

cisco_pid_fc

(Optional) Cisco PID

tx_type_fc

(Optional) FC Transmitter type

tx_len_fc

(Optional) FC Transmitter length

tx_medium_fc

(Optional) FC Transmitter medium

tx_speeds_fc

(Optional) Transmission speeds

nom_bitrate_fc

(Optional) Nominal bit rate in MBits/sec

len_9_fc

(Optional) Link length supported for 9/125um fiber

len_50_fc

(Optional) Link length supported for 50/125um fiber

len_625_fc

(Optional) Link length supported for 62.5/125um fiber

len_50_OM3_fc

(Optional) Link length supported for 50/125um fiber in m

cisco_ext_id_fc

(Optional) Cisco extended ID

txcvr_type_fc

(Optional) Transceiver type

connector_type_fc

(Optional) Connector type

bit_encoding_fc

(Optional) Bit encoding

protocol_type_fc

(Optional) Protocol type

10gbe_code_fc

(Optional) 10GbE code byte

fiber_type_byte0_fc

(Optional) Fiber Type Byte 0

fiber_type_byte1_fc

(Optional) Fiber Type Byte 1

tx_range_fc

(Optional) Transmission Range

temp_slope_fc

(Optional) Temperature slope

temp_offset_fc

(Optional) Temperature offset

volt_slope_fc

(Optional) Voltage slope

volt_offset_fc

(Optional) Voltage offset

curr_slope_fc

(Optional) Current slope

curr_offset_fc

(Optional) Current offset

tx_pwr_slope_fc

(Optional) Tx power slope

tx_pwr_offset_fc

(Optional) Tx power offset

rx_pwr_4_fc

(Optional) Rx power 4

rx_pwr_3_fc

(Optional) Rx power 3

rx_pwr_2_fc

(Optional) Rx power 2

rx_pwr_1_fc

(Optional) Rx power 1

rx_pwr_0_fc

(Optional) Rx power 0

temperature_fc

(Optional) Temperature

temp_flag_fc

(Optional) Temperature Flag

temp_alrm_hi_fc

(Optional) Temperature Alarm High

temp_alrm_lo_fc

(Optional) Temperature Alarm Low

temp_warn_hi_fc

(Optional) Temperature Warning High

temp_warn_lo_fc

(Optional) Temperature Warning Low

voltage_fc

(Optional) Voltage

volt_flag_fc

(Optional) Voltage Flag

volt_alrm_hi_fc

(Optional) Voltage Alarm High

volt_alrm_lo_fc

(Optional) Voltage Alarm Low

volt_warn_hi_fc

(Optional) Voltage Warning High

volt_warn_lo_fc

(Optional) Voltage Warning Low

current_fc

(Optional) Current

current_flag_fc

(Optional) Current Flag

current_alrm_hi_fc

(Optional) Current Alarm High

current_alrm_lo_fc

(Optional) Current Alarm Low

current_warn_hi_fc

(Optional) Current Warning High

current_warn_lo_fc

(Optional) Current Warning Low

tx_pwr_fc

(Optional) Tx Power

tx_pwr_flag_fc

(Optional) Tx Power Flag

tx_pwr_alrm_hi_fc

(Optional) Tx Power Alarm High

tx_pwr_alrm_lo_fc

(Optional) Tx Power Alarm Low

tx_pwr_warn_hi_fc

(Optional) Tx Power Warning High

tx_pwr_warn_lo_fc

(Optional) Tx Power Warning Low

rx_pwr_fc

(Optional) Rx Power

rx_pwr_flag_fc

(Optional) Rx Power Flag

rx_pwr_alrm_hi_fc

(Optional) Rx Power Alarm High

rx_pwr_alrm_lo_fc

(Optional) Rx Power Alarm Low

rx_pwr_warn_hi_fc

(Optional) Rx Power Warning High

rx_pwr_warn_lo_fc

(Optional) Rx Power Warning Low

xmit_faults_fc

(Optional) Transmit Fault Count

Command Mode

- /exec

show interface transceiver

show interface <ifid_transceiver> transceiver [ calibrations | details | sprom ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <qsfp_or_cfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_9> ] [ <len_9_2> ] [ <len_50> ] [ <len_625> ] [ <len_cu> ] [ <len_50_OM3> ] [ <txcvr_type> ] [ <connector_type> ] [ <bit_encoding> ] [ <protocol_type> ] [ <10gbe_code> ] [ <fiber_type_byte0> ] [ <fiber_type_byte1> ] [ <tx_range> ] [ <cable_type> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <cisco_part_number> ] [ <cisco_product_id> ] [ <cisco_vendor_id> ] [ <firmware_version> ] [ <identifier> ] [ <ext_identifier> ] [ <connector> ] [ <infiniband_compliance_code> ] [ <sonet_compliance_code> ] [ <gigabit_ethernet_compliance_code> ] [ <fibre_chan_link_length> ] [ <fibre_chan_trans_technology> ] [ <fibre_chan_trans_tech_reserved> ] [ <fibre_chan_transmission_media> ] [ <fibre_chan_speed> ] [ <encoding> ] [ <br_nominal> ] [ <reserved1> ] [ <length_smf> ] [ <length_om3> ] [ <length_om2> ] [ <length_om1> ] [ <length_9u_1> ] [ <length_9u_2> ] [ <length_50u> ] [ <length_60u> ] [ <length_copper> ] [ <reserved3> ] [ <vendor_oui> ] [ <vendor_part_no> ] [ <vendor_revision> ] [ <reserved4> ] [ <check_code_id> ] [ <options> ] [ <br_max> ] [ <br_min> ] [ <vendor_serial_no> ] [ <data_code> ] [ <diagnostic_monitoring_type> ] [ <enhanced_options> ] [ <sff8472compliance> ] [ <check_code_ext> ] [ <vendor_specific_data_id_data> ] [ <info_not_available> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ TABLE_lane [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_transceiver

Enter interface type and number in module/slot format

transceiver

Show interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

sprom

(Optional) Show interface transceiver sprom information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp

(Optional) sfp

qsfp_or_cfp

(Optional) qsfp_or_cfp

type

(Optional) type

name

(Optional) Name

partnum

(Optional) part number

rev

(Optional) revision

serialnum

(Optional) serial number

nom_bitrate

(Optional) Nominal bit rate in MBits/sec

len_9

(Optional) Link length supported for 9/125um fiber in Km

len_9_2

(Optional) Link length supported for 9/125um fiber in m

len_50

(Optional) Link length supported for 50/125um fiber in m

len_625

(Optional) Link length supported for 62.5/125um fiber in m

len_cu

(Optional) Link length supported for copper sfp in m

len_50_OM3

(Optional) Link length supported for 50/125um fiber in m

txcvr_type

(Optional)

connector_type

(Optional)

bit_encoding

(Optional)

protocol_type

(Optional)

10gbe_code

(Optional)

fiber_type_byte0

(Optional)

fiber_type_byte1

(Optional)

tx_range

(Optional)

cable_type

(Optional)

ciscoid

(Optional) Cisco extended id

ciscoid_1

(Optional) Cisco extended id number

cisco_part_number

(Optional) Cisco part number

cisco_product_id

(Optional) Cisco product identifier

cisco_vendor_id

(Optional) Cisco vendor identifier

firmware_version

(Optional) Firmware version

identifier

(Optional) SFP Identifier

ext_identifier

(Optional) SFP Ext Identifier

connector

(Optional) SFP connector

infiniband_compliance_code

(Optional) SFP Infiniband Compliance Code

sonet_compliance_code

(Optional) Sonet Compliance Code

gigabit_ethernet_compliance_code

(Optional) Gigabit Ethernet Compliance Code

fibre_chan_link_length

(Optional) Fibre Chan Link Length

fibre_chan_trans_technology

(Optional) Fibre Chan Trans Technology

fibre_chan_trans_tech_reserved

(Optional) Fibre Chan Trans Tech Reserved

fibre_chan_transmission_media

(Optional) Fibre Chan Transmission Media

fibre_chan_speed

(Optional) Fibre Chan Speed

encoding

(Optional) Encoding

br_nominal

(Optional) BR Nominal

reserved1

(Optional) Reserved1

length_smf

(Optional) Length_SMF

length_om3

(Optional) Length_OM3

length_om2

(Optional) Length_OM2

length_om1

(Optional) Length_OM1

length_9u_1

(Optional) Length 9u 1

length_9u_2

(Optional) Length 9u 2

length_50u

(Optional) Length 50u

length_60u

(Optional) Length 60u

length_copper

(Optional) Length Copper

reserved3

(Optional) Reserved3

vendor_oui

(Optional) Vendor OUI

vendor_part_no

(Optional) Vendor Part No

vendor_revision

(Optional) Vendor Revision

reserved4

(Optional) Reserved4

check_code_id

(Optional) Check Code ID

options

(Optional) Options

br_max

(Optional) BR max

br_min

(Optional) BR min

vendor_serial_no

(Optional) Vendor Serial No

data_code

(Optional) Data code

diagnostic_monitoring_type

(Optional) Diagnostic Monitoring Type

enhanced_options

(Optional) Enhanced Options

sff8472compliance

(Optional) SFF8472Compliance

check_code_ext

(Optional) Check code ext

vendor_specific_data_id_data

(Optional) Vendor Specific Data Id Data

info_not_available

(Optional) Info not available

temp_slope

(Optional) Temperature slope

temp_offset

(Optional) Temperature offset

volt_slope

(Optional) Voltage slope

volt_offset

(Optional) Voltage offset

curr_slope

(Optional) Current slope

curr_offset

(Optional) Current offset

tx_pwr_slope

(Optional) Tx power slope

tx_pwr_offset

(Optional) Tx power offset

rx_pwr_4

(Optional) Rx power 4

rx_pwr_3

(Optional) Rx power 3

rx_pwr_2

(Optional) Rx power 2

rx_pwr_1

(Optional) Rx power 1

rx_pwr_0

(Optional) Rx power 0

TABLE_lane

(Optional) show lane

lane_number

(Optional) Lane number

temperature

(Optional) Temperature

temp_flag

(Optional) Temperature Flag

temp_alrm_hi

(Optional) Temperature Alarm High

temp_alrm_lo

(Optional) Temperature Alarm Low

temp_warn_hi

(Optional) Temperature Warning High

temp_warn_lo

(Optional) Temperature Warning Low

voltage

(Optional) Voltage

volt_flag

(Optional) Voltage Flag

volt_alrm_hi

(Optional) Voltage Alarm High

volt_alrm_lo

(Optional) Voltage Alarm Low

volt_warn_hi

(Optional) Voltage Warning High

volt_warn_lo

(Optional) Voltage Warning Low

current

(Optional) Current

current_flag

(Optional) Current Flag

current_alrm_hi

(Optional) Current Alarm High

current_alrm_lo

(Optional) Current Alarm Low

current_warn_hi

(Optional) Current Warning High

current_warn_lo

(Optional) Current Warning Low

tx_pwr

(Optional) Tx Power

tx_pwr_flag

(Optional) Tx Power Flag

tx_pwr_alrm_hi

(Optional) Tx Power Alarm High

tx_pwr_alrm_lo

(Optional) Tx Power Alarm Low

tx_pwr_warn_hi

(Optional) Tx Power Warning High

tx_pwr_warn_lo

(Optional) Tx Power Warning Low

rx_pwr

(Optional) Rx Power

rx_pwr_flag

(Optional) Rx Power Flag

rx_pwr_alrm_hi

(Optional) Rx Power Alarm High

rx_pwr_alrm_lo

(Optional) Rx Power Alarm Low

rx_pwr_warn_hi

(Optional) Rx Power Warning High

rx_pwr_warn_lo

(Optional) Rx Power Warning Low

xmit_faults

(Optional) Transmit Fault Count

snr

(Optional) RX Signal-to-Noise Ratio (SNR)

snr_flag

(Optional) SNR Flag

snr_alrm_hi

(Optional) SNR Alarm High

snr_alrm_lo

(Optional) SNR Alarm Low

snr_warn_hi

(Optional) SNR Warning High

snr_warn_lo

(Optional) SNR Warning Low

isi

(Optional) Residual-Dispersion(ISI)

isi_flag

(Optional) ISI Flag

isi_alrm_hi

(Optional) ISI alarm high

isi_alrm_lo

(Optional) ISI alarm low

isi_warn_hi

(Optional) ISI warning high

isi_warn_lo

(Optional) ISI warning low

pam

(Optional) PAM Transition

pam_flag

(Optional) PAM Flag

pam_alrm_hi

(Optional) PAM alarm high

pam_alrm_lo

(Optional) PAM alarm low

pam_warn_hi

(Optional) PAM warning high

pam_warn_lo

(Optional) PAM warning low

pre_fec_ber

(Optional) Pre-FEC BER

pre_fec_ber_flag

(Optional) Pre-FEC BER flag

pre_fec_ber_alrm_hi

(Optional) Pre-FEC BER alarm high

pre_fec_ber_alrm_lo

(Optional) Pre-FEC BER alarm low

pre_fec_ber_warn_hi

(Optional) Pre-FEC BER warning high

pre_fec_ber_warn_lo

(Optional) Pre-FEC BER warning low

uncorrect_ber

(Optional) Uncorrected BER

uncorrect_ber_flag

(Optional) Uncorrected BER flag

uncorrect_ber_alrm_hi

(Optional) Uncorrected BER alarm high

uncorrect_ber_alrm_lo

(Optional) Uncorrected BER alarm low

uncorrect_ber_warn_hi

(Optional) Uncorrected BER warning high

uncorrect_ber_warn_lo

(Optional) Uncorrected BER warning low

tec_current

(Optional) TEC Current

tec_current_flag

(Optional) TEC Current flag

tec_current_alrm_hi

(Optional) TEC Current Alarm High

tec_current_alrm_lo

(Optional) TEC Current Alarm Low

tec_current_warn_hi

(Optional) TEC Current Warning High

tec_current_warn_lo

(Optional) TEC Current Warning Low

laser_freq

(Optional) Laser Frequency

laser_freq_flag

(Optional) Laser Frequency flag

laser_freq_alrm_hi

(Optional) Laser Frequency Alarm High

laser_freq_alrm_lo

(Optional) Laser Frequency Alarm Low

laser_freq_warn_hi

(Optional) Laser Frequency Warning High

laser_freq_warn_lo

(Optional) Laser Frequency Warning Low

laser_temp

(Optional) Laser Temperature

laser_temp_flag

(Optional) Laser Temperature flag

laser_temp_alrm_hi

(Optional) Laser Temperature Alarm High

laser_temp_alrm_lo

(Optional) Laser Temperature Alarm Low

laser_temp_warn_hi

(Optional) Laser Temperature Warning High

laser_temp_warn_lo

(Optional) Laser Temperature Warning Low

pre_fec_ber_acc

(Optional) Pre-FEC BER Acc

pre_fec_ber_acc_flag

(Optional) Pre-FEC BER Acc flag

pre_fec_ber_acc_alrm_hi

(Optional) Pre-FEC BER Acc alarm high

pre_fec_ber_acc_alrm_lo

(Optional) Pre-FEC BER Acc alarm low

pre_fec_ber_acc_warn_hi

(Optional) Pre-FEC BER Acc warning high

pre_fec_ber_acc_warn_lo

(Optional) Pre-FEC BER Acc warning low

pre_fec_ber_min

(Optional) Pre-FEC BER Min

pre_fec_ber_min_flag

(Optional) Pre-FEC BER Min flag

pre_fec_ber_min_alrm_hi

(Optional) Pre-FEC BER Min alarm high

pre_fec_ber_min_alrm_lo

(Optional) Pre-FEC BER Min alarm low

pre_fec_ber_min_warn_hi

(Optional) Pre-FEC BER Min warning high

pre_fec_ber_min_warn_lo

(Optional) Pre-FEC BER Min warning low

pre_fec_ber_max

(Optional) Pre-FEC BER Max

pre_fec_ber_max_flag

(Optional) Pre-FEC BER Max flag

pre_fec_ber_max_alrm_hi

(Optional) Pre-FEC BER Max alarm high

pre_fec_ber_max_alrm_lo

(Optional) Pre-FEC BER Max alarm low

pre_fec_ber_max_warn_hi

(Optional) Pre-FEC BER Max warning high

pre_fec_ber_max_warn_lo

(Optional) Pre-FEC BER Max warning low

pre_fec_ber_cur

(Optional) Pre-FEC BER Cur

pre_fec_ber_cur_flag

(Optional) Pre-FEC BER Cur flag

pre_fec_ber_cur_alrm_hi

(Optional) Pre-FEC BER Cur alarm high

pre_fec_ber_cur_alrm_lo

(Optional) Pre-FEC BER Cur alarm low

pre_fec_ber_cur_warn_hi

(Optional) Pre-FEC BER Cur warning high

pre_fec_ber_cur_warn_lo

(Optional) Pre-FEC BER Cur warning low

uncorrect_ber_acc

(Optional) Uncorrected BER Acc

uncorrect_ber_acc_flag

(Optional) Uncorrected BER Acc flag

uncorrect_ber_acc_alrm_hi

(Optional) Uncorrected BER Acc alarm high

uncorrect_ber_acc_alrm_lo

(Optional) Uncorrected BER Acc alarm low

uncorrect_ber_acc_warn_hi

(Optional) Uncorrected BER Acc warning high

uncorrect_ber_acc_warn_lo

(Optional) Uncorrected BER Acc warning low

uncorrect_ber_min

(Optional) Uncorrected BER Min

uncorrect_ber_min_flag

(Optional) Uncorrected BER Min flag

uncorrect_ber_min_alrm_hi

(Optional) Uncorrected BER Min alarm high

uncorrect_ber_min_alrm_lo

(Optional) Uncorrected BER Min alarm low

uncorrect_ber_min_warn_hi

(Optional) Uncorrected BER Min warning high

uncorrect_ber_min_warn_lo

(Optional) Uncorrected BER Min warning low

uncorrect_ber_max

(Optional) Uncorrected BER Max

uncorrect_ber_max_flag

(Optional) Uncorrected BER Max flag

uncorrect_ber_max_alrm_hi

(Optional) Uncorrected BER Max alarm high

uncorrect_ber_max_alrm_lo

(Optional) Uncorrected BER Max alarm low

uncorrect_ber_max_warn_hi

(Optional) Uncorrected BER Max warning high

uncorrect_ber_max_warn_lo

(Optional) Uncorrected BER Max warning low

uncorrect_ber_cur

(Optional) Uncorrected BER Cur

uncorrect_ber_cur_flag

(Optional) Uncorrected BER Cur flag

uncorrect_ber_cur_alrm_hi

(Optional) Uncorrected BER Cur alarm high

uncorrect_ber_cur_alrm_lo

(Optional) Uncorrected BER Cur alarm low

uncorrect_ber_cur_warn_hi

(Optional) Uncorrected BER Cur warning high

uncorrect_ber_cur_warn_lo

(Optional) Uncorrected BER Cur warning low

Command Mode

- /exec

show interface transceiver fex-fabric

show interface transceiver fex-fabric [ calibrations | details ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_50> ] [ <len_625> ] [ <len_50_OM3> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <info_not_available> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ TABLE_lane [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

transceiver

Show interface transceiver information

fex-fabric

Show FEX interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp

(Optional) sfp

type

(Optional) type

name

(Optional) Name

partnum

(Optional) part number

rev

(Optional) revision

serialnum

(Optional) serial number

nom_bitrate

(Optional) Nominal bit rate in MBits/sec

len_50

(Optional) Link length supported for 50/125mm fiber

len_625

(Optional) Link length supported for 62.5/125mm fiber

len_50_OM3

(Optional) Link length supported for 50/125um fiber in m

ciscoid

(Optional) Cisco extended id

ciscoid_1

(Optional) Cisco extended id number

info_not_available

(Optional) Error case if sfp info not available

temp_slope

(Optional) Temperature slope

temp_offset

(Optional) Temperature offset

volt_slope

(Optional) Voltage slope

volt_offset

(Optional) Voltage offset

curr_slope

(Optional) Current slope

curr_offset

(Optional) Current offset

tx_pwr_slope

(Optional) Tx power slope

tx_pwr_offset

(Optional) Tx power offset

rx_pwr_4

(Optional) Rx power 4

rx_pwr_3

(Optional) Rx power 3

rx_pwr_2

(Optional) Rx power 2

rx_pwr_1

(Optional) Rx power 1

rx_pwr_0

(Optional) Rx power 0

TABLE_lane

(Optional) show lane

lane_number

(Optional) Lane number

temperature

(Optional) Temperature

temp_flag

(Optional) Temperature Flag

temp_alrm_hi

(Optional) Temperature Alarm High

temp_alrm_lo

(Optional) Temperature Alarm Low

temp_warn_hi

(Optional) Temperature Warning High

temp_warn_lo

(Optional) Temperature Warning Low

voltage

(Optional) Voltage

volt_flag

(Optional) Voltage Flag

volt_alrm_hi

(Optional) Voltage Alarm High

volt_alrm_lo

(Optional) Voltage Alarm Low

volt_warn_hi

(Optional) Voltage Warning High

volt_warn_lo

(Optional) Voltage Warning Low

current

(Optional) Current

current_flag

(Optional) Current Flag

current_alrm_hi

(Optional) Current Alarm High

current_alrm_lo

(Optional) Current Alarm Low

current_warn_hi

(Optional) Current Warning High

current_warn_lo

(Optional) Current Warning Low

tx_pwr

(Optional) Tx Power

tx_pwr_flag

(Optional) Tx Power Flag

tx_pwr_alrm_hi

(Optional) Tx Power Alarm High

tx_pwr_alrm_lo

(Optional) Tx Power Alarm Low

tx_pwr_warn_hi

(Optional) Tx Power Warning High

tx_pwr_warn_lo

(Optional) Tx Power Warning Low

rx_pwr

(Optional) Rx Power

rx_pwr_flag

(Optional) Rx Power Flag

rx_pwr_alrm_hi

(Optional) Rx Power Alarm High

rx_pwr_alrm_lo

(Optional) Rx Power Alarm Low

rx_pwr_warn_hi

(Optional) Rx Power Warning High

rx_pwr_warn_lo

(Optional) Rx Power Warning Low

xmit_faults

(Optional) Transmit Fault Count

snr

(Optional) RX Signal-to-Noise Ratio (SNR)

snr_flag

(Optional) SNR Flag

snr_alrm_hi

(Optional) SNR Alarm High

snr_alrm_lo

(Optional) SNR Alarm Low

snr_warn_hi

(Optional) SNR Warning High

snr_warn_lo

(Optional) SNR Warning Low

isi

(Optional) Residual-Dispersion(ISI)

isi_flag

(Optional) ISI Flag

isi_alrm_hi

(Optional) ISI alarm high

isi_alrm_lo

(Optional) ISI alarm low

isi_warn_hi

(Optional) ISI warning high

isi_warn_lo

(Optional) ISI warning low

pam

(Optional) PAM Transition

pam_flag

(Optional) PAM Flag

pam_alrm_hi

(Optional) PAM alarm high

pam_alrm_lo

(Optional) PAM alarm low

pam_warn_hi

(Optional) PAM warning high

pam_warn_lo

(Optional) PAM warning low

pre_fec_ber

(Optional) Pre-FEC BER

pre_fec_ber_flag

(Optional) Pre-FEC BER flag

pre_fec_ber_alrm_hi

(Optional) Pre-FEC BER alarm high

pre_fec_ber_alrm_lo

(Optional) Pre-FEC BER alarm low

pre_fec_ber_warn_hi

(Optional) Pre-FEC BER warning high

pre_fec_ber_warn_lo

(Optional) Pre-FEC BER warning low

uncorrect_ber

(Optional) Uncorrected BER

uncorrect_ber_flag

(Optional) Uncorrected BER flag

uncorrect_ber_alrm_hi

(Optional) Uncorrected BER alarm high

uncorrect_ber_alrm_lo

(Optional) Uncorrected BER alarm low

uncorrect_ber_warn_hi

(Optional) Uncorrected BER warning high

uncorrect_ber_warn_lo

(Optional) Uncorrected BER warning low

tec_current

(Optional) TEC Current

tec_current_flag

(Optional) TEC Current flag

tec_current_alrm_hi

(Optional) TEC Current Alarm High

tec_current_alrm_lo

(Optional) TEC Current Alarm Low

tec_current_warn_hi

(Optional) TEC Current Warning High

tec_current_warn_lo

(Optional) TEC Current Warning Low

laser_freq

(Optional) Laser Frequency

laser_freq_flag

(Optional) Laser Frequency flag

laser_freq_alrm_hi

(Optional) Laser Frequency Alarm High

laser_freq_alrm_lo

(Optional) Laser Frequency Alarm Low

laser_freq_warn_hi

(Optional) Laser Frequency Warning High

laser_freq_warn_lo

(Optional) Laser Frequency Warning Low

laser_temp

(Optional) Laser Temperature

laser_temp_flag

(Optional) Laser Temperature flag

laser_temp_alrm_hi

(Optional) Laser Temperature Alarm High

laser_temp_alrm_lo

(Optional) Laser Temperature Alarm Low

laser_temp_warn_hi

(Optional) Laser Temperature Warning High

laser_temp_warn_lo

(Optional) Laser Temperature Warning Low

pre_fec_ber_acc

(Optional) Pre-FEC BER Acc

pre_fec_ber_acc_flag

(Optional) Pre-FEC BER Acc flag

pre_fec_ber_acc_alrm_hi

(Optional) Pre-FEC BER Acc alarm high

pre_fec_ber_acc_alrm_lo

(Optional) Pre-FEC BER Acc alarm low

pre_fec_ber_acc_warn_hi

(Optional) Pre-FEC BER Acc warning high

pre_fec_ber_acc_warn_lo

(Optional) Pre-FEC BER Acc warning low

pre_fec_ber_min

(Optional) Pre-FEC BER Min

pre_fec_ber_min_flag

(Optional) Pre-FEC BER Min flag

pre_fec_ber_min_alrm_hi

(Optional) Pre-FEC BER Min alarm high

pre_fec_ber_min_alrm_lo

(Optional) Pre-FEC BER Min alarm low

pre_fec_ber_min_warn_hi

(Optional) Pre-FEC BER Min warning high

pre_fec_ber_min_warn_lo

(Optional) Pre-FEC BER Min warning low

pre_fec_ber_max

(Optional) Pre-FEC BER Max

pre_fec_ber_max_flag

(Optional) Pre-FEC BER Max flag

pre_fec_ber_max_alrm_hi

(Optional) Pre-FEC BER Max alarm high

pre_fec_ber_max_alrm_lo

(Optional) Pre-FEC BER Max alarm low

pre_fec_ber_max_warn_hi

(Optional) Pre-FEC BER Max warning high

pre_fec_ber_max_warn_lo

(Optional) Pre-FEC BER Max warning low

pre_fec_ber_cur

(Optional) Pre-FEC BER Cur

pre_fec_ber_cur_flag

(Optional) Pre-FEC BER Cur flag

pre_fec_ber_cur_alrm_hi

(Optional) Pre-FEC BER Cur alarm high

pre_fec_ber_cur_alrm_lo

(Optional) Pre-FEC BER Cur alarm low

pre_fec_ber_cur_warn_hi

(Optional) Pre-FEC BER Cur warning high

pre_fec_ber_cur_warn_lo

(Optional) Pre-FEC BER Cur warning low

uncorrect_ber_acc

(Optional) Uncorrected BER Acc

uncorrect_ber_acc_flag

(Optional) Uncorrected BER Acc flag

uncorrect_ber_acc_alrm_hi

(Optional) Uncorrected BER Acc alarm high

uncorrect_ber_acc_alrm_lo

(Optional) Uncorrected BER Acc alarm low

uncorrect_ber_acc_warn_hi

(Optional) Uncorrected BER Acc warning high

uncorrect_ber_acc_warn_lo

(Optional) Uncorrected BER Acc warning low

uncorrect_ber_min

(Optional) Uncorrected BER Min

uncorrect_ber_min_flag

(Optional) Uncorrected BER Min flag

uncorrect_ber_min_alrm_hi

(Optional) Uncorrected BER Min alarm high

uncorrect_ber_min_alrm_lo

(Optional) Uncorrected BER Min alarm low

uncorrect_ber_min_warn_hi

(Optional) Uncorrected BER Min warning high

uncorrect_ber_min_warn_lo

(Optional) Uncorrected BER Min warning low

uncorrect_ber_max

(Optional) Uncorrected BER Max

uncorrect_ber_max_flag

(Optional) Uncorrected BER Max flag

uncorrect_ber_max_alrm_hi

(Optional) Uncorrected BER Max alarm high

uncorrect_ber_max_alrm_lo

(Optional) Uncorrected BER Max alarm low

uncorrect_ber_max_warn_hi

(Optional) Uncorrected BER Max warning high

uncorrect_ber_max_warn_lo

(Optional) Uncorrected BER Max warning low

uncorrect_ber_cur

(Optional) Uncorrected BER Cur

uncorrect_ber_cur_flag

(Optional) Uncorrected BER Cur flag

uncorrect_ber_cur_alrm_hi

(Optional) Uncorrected BER Cur alarm high

uncorrect_ber_cur_alrm_lo

(Optional) Uncorrected BER Cur alarm low

uncorrect_ber_cur_warn_hi

(Optional) Uncorrected BER Cur warning high

uncorrect_ber_cur_warn_lo

(Optional) Uncorrected BER Cur warning low

Command Mode

- /exec

show interface transceiver fex-fabric

show interface <ifeth_trans> transceiver fex-fabric [ calibrations | details ] [ __readonly__ TABLE_interface <interface> <sfp> <name> <partnum> <rev> <serialnum> <nom_bitrate> <len_50> <len_625> <ciscoid> <ciscoid_1> [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_trans

Enter interface type and number in module/slot format

transceiver

Show interface transceiver information

fex-fabric

Show FEX interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp

(Optional) sfp

name

(Optional) Name

partnum

(Optional) part number

rev

(Optional) revision

serialnum

(Optional) serial number

nom_bitrate

(Optional) Nominal bit rate in MBits/sec

len_50

(Optional) Link length supported for 50/125mm fiber

len_625

(Optional) Link length supported for 62.5/125mm fiber

ciscoid

(Optional) Cisco extended id

ciscoid_1

(Optional) Cisco extended id number

temp_slope

(Optional) Temperature slope

temp_offset

(Optional) Temperature offset

volt_slope

(Optional) Voltage slope

volt_offset

(Optional) Voltage offset

curr_slope

(Optional) Current slope

curr_offset

(Optional) Current offset

tx_pwr_slope

(Optional) Tx power slope

tx_pwr_offset

(Optional) Tx power offset

rx_pwr_4

(Optional) Rx power 4

rx_pwr_3

(Optional) Rx power 3

rx_pwr_2

(Optional) Rx power 2

rx_pwr_1

(Optional) Rx power 1

rx_pwr_0

(Optional) Rx power 0

Command Mode

- /exec

show interface transceiver inventory

show interface transceiver inventory

Syntax Description

show

Show running system information

interface

Show interface status and information

transceiver

Show interface transceiver information

inventory

Show interface transceiver inventory

Command Mode

- /exec

show interface trunk

show interface trunk [ module <module> | vlan <vlan_id> | fex <fex_num> ] [ __readonly__ [ { TABLE_interface <interface> <native> <status> <portchannel> } ] [ { TABLE_allowed_vlans <interface> <allowedvlans> } ] [ { TABLE_errored_vlans <interface> <erroredvlans> } ] [ { TABLE_stp_forward <interface> <stpfwd_vlans> } ] [ { TABLE_fabricpath_vlans <interface> <fabricpath_vlans> } ] [ { TABLE_vtp_pruning <interface> <vtppruning_vlans> } ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

trunk

Show interface trunk information

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

fex

(Optional) Limit display to interfaces on a FEX

fex_num

(Optional) Enter FEX number

vlan

(Optional) Show per vlan information for trunk

vlan_id

(Optional) Enter vlan range

interface

(Optional) Interface index

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

native

(Optional) Native VLAN

status

(Optional) Status

portchannel

(Optional) Port Channel

TABLE_allowed_vlans

(Optional) show allowed vlans

interface

(Optional) Interface index

allowedvlans

(Optional) VLANs allowed and active in management domain

TABLE_errored_vlans

(Optional) show errored vlans

interface

(Optional) Interface index

erroredvlans

(Optional) Errored VLANs

TABLE_stp_forward

(Optional) show STP forwarding VLANs

interface

(Optional) Interface index

stpfwd_vlans

(Optional) STP Forwarding VLANs

TABLE_fabricpath_vlans

(Optional) show fabricpath VLANs

interface

(Optional) Interface index

fabricpath_vlans

(Optional) FabricPath VLANs

TABLE_vtp_pruning

(Optional) show VTP pruning VLANs

vtppruning_vlans

(Optional) VTP Pruning VLANs

Command Mode

- /exec

show interface trunk

show interface <ifeth_trnk> trunk [ __readonly__ { TABLE_interface <interface> <native> <status> <portchannel> } { TABLE_allowed_vlans <interface> <allowedvlans> } { TABLE_errored_vlans <interface> <erroredvlans> } { TABLE_stp_forward <interface> <stpfwd_vlans> } [ { TABLE_fabricpath_vlans <interface> <fabricpath_vlans> } ] { TABLE_vtp_pruning <interface> <vtppruning_vlans> } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_trnk

Enter interface type and number in module/slot format

trunk

Show interface trunk information

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

native

(Optional) Native VLAN

status

(Optional) Status

portchannel

(Optional) Port Channel

TABLE_allowed_vlans

(Optional) show allowed vlans

interface

(Optional) Interface index

allowedvlans

(Optional) VLANs allowed and active in management domain

TABLE_errored_vlans

(Optional) show errored vlans

interface

(Optional) Interface index

erroredvlans

(Optional) Errored VLANs

TABLE_stp_forward

(Optional) show STP forwarding VLANs

interface

(Optional) Interface index

stpfwd_vlans

(Optional) STP Forwarding VLANs

TABLE_fabricpath_vlans

(Optional) show fabricpath VLANs

interface

(Optional) Interface index

fabricpath_vlans

(Optional) FabricPath VLANs

TABLE_vtp_pruning

(Optional) show VTP pruning VLANs

interface

(Optional) Interface index

vtppruning_vlans

(Optional) VTP Pruning VLANs

Command Mode

- /exec

show interface trunk vsan

show interface <ifid_trnk> trunk vsan [ <vsan_id> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_trnk

Enter interface type and number in module/slot format

trunk

Show interface trunk information

vsan

Show per vsan information for trunk

vsan_id

(Optional) Enter vsan range

Command Mode

- /exec

show interface trunk vsan

show interface trunk vsan [ <vsan_id> ] [ __readonly__ { TABLE_interface_trunk [ <interface> ] [ <oper_state> ] [ <oper_state_reason> ] [ <bundle_str> ] [ TABLE_vsan_info { [ <vsan_num> ] [ <vsan_state> ] [ <vsan_state_reason> ] [ <fcid> ] } ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

trunk

Show interface trunk information

vsan

Show per vsan information for trunk

vsan_id

(Optional) Enter vsan range

__readonly__

(Optional)

TABLE_interface_trunk

(Optional) interface trunk table

interface

(Optional) fc interface

oper_state

(Optional) the status of trunking

oper_state_reason

(Optional) reason for operation state

bundle_str

(Optional) bundle string

TABLE_vsan_info

(Optional) vsan information

vsan_num

(Optional) the vsan ID

vsan_state

(Optional) the ststus of vsan

vsan_state_reason

(Optional) reason for vsan state

fcid

(Optional) FCID

Command Mode

- /exec

show interface trunk vsan

show interface <ifid_trnk> trunk vsan [ <vsan_id> ] [ __readonly__ { TABLE_interface_trunk [ <interface> ] [ <oper_state> ] [ <oper_state_reason> ] [ <bundle_str> ] [ TABLE_vsan_info { [ <vsan_num> ] [ <vsan_state> ] [ <vsan_state_reason> ] [ <fcid> ] } ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_trnk

Enter interface type and number in module/slot format

trunk

Show interface trunk information

vsan

Show per vsan information for trunk

vsan_id

(Optional) Enter vsan range

__readonly__

(Optional) Read Only

TABLE_interface_trunk

(Optional) interface trunk table

interface

(Optional) fc interface

oper_state

(Optional) the status of trunking

oper_state_reason

(Optional) reason for operation state

bundle_str

(Optional) bundle string

TABLE_vsan_info

(Optional) vsan information

vsan_num

(Optional) the vsan ID

vsan_state

(Optional) the ststus of vsan

vsan_state_reason

(Optional) reason for vsan state

fcid

(Optional) FCID

Command Mode

- /exec

show interface untagged-cos

show interface untagged-cos [ module <mod_num> ] [ __readonly__ <interface> <ucos-value> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

untagged-cos

Show interface untagged CoS information

module

(Optional) Limit display to interfaces on module

mod_num

(Optional) Enter module number

__readonly__

(Optional)

interface

(Optional) Interface index

ucos-value

(Optional) COS value

Command Mode

- /exec

show interface vlan mapping

show interface <ifindex> vlan mapping [ __readonly__ <if-index-id> { TABLE_vlan_xlt <orig-vlan-id> [ <inner-vlan-id> ] <xlt-vlan-id> } <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifindex

Enter interface type and number in module/slot format

vlan

Show VLAN information

mapping

VLAN translation mapping

__readonly__

(Optional) Read Only

TABLE_vlan_xlt

(Optional) Vlan translation table

if-index-id

(Optional) Interface index id

orig-vlan-id

(Optional) Original Vlan Id

inner-vlan-id

(Optional) Inner Vlan Id

xlt-vlan-id

(Optional) Translated Vlan Id

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

- /exec

show inventory

show inventory [ chassis | fans | power_supply | module [ <module> ] | <s0> [ <santa-cruz-range> ] | all ] [ __readonly__ TABLE_inv <name> <desc> <productid> <vendorid> <serialnum> ]

Syntax Description

show

Show running system information

inventory

system inventory information

chassis

(Optional) system inventory chassis information

fans

(Optional) system inventory fan information

power_supply

(Optional) system inventory power supply information

module

(Optional) system inventory module information

module

(Optional) please enter the module number

s0

(Optional) please enter the module number

santa-cruz-range

(Optional) please enter the xbar number

all

(Optional) system and transceiver inventory information

__readonly__

(Optional)

TABLE_inv

(Optional) Inventory table

name

(Optional) Name of inventory

desc

(Optional) Description of inventory

productid

(Optional) Product ID

vendorid

(Optional) Vendor ID

serialnum

(Optional) Serial Number

Command Mode

- /exec

show ip adjacency

show ip adjacency [ <interface> [ summary ] | <ip-addr> [ non-best | detail ] | detail | summary | non-best | [ throttle ] statistics ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <invalid_pkt_cnt> ] [ <invalid_byte_cnt> ] [ <global_drop_pkt_cnt> ] [ <global_drop_byte_cnt> ] [ <global_punt_pkt_cnt> ] [ <global_punt_byte_cnt> ] [ <global_glean_pkt_cnt> ] [ <global_glean_byte_cnt> ] [ <glean_pkt_cnt> ] [ <glean_byte_cnt> ] [ <normal_pkt_cnt> ] [ <normal_byte_cnt> ] [ <last_updated> ] [ <count-static> ] [ <count-dynamic> ] [ <count-others> ] [ <count-throttle> ] [ <count-total> ] [ TABLE_vrf <vrf-name-out> [ TABLE_afi <afi> <count> [ TABLE_adj [ <intf-out> ] [ <ip-addr-out> ] [ <phy-intf> ] [ <mac> ] [ <pref> ] [ <owner> ] [ <pkt-count> ] [ <byte-count> ] [ <is-best> ] [ <is-thrtld> ] ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

adjacency

Display adjacency table

interface

(Optional) Display specific interface adjacencies only

ip-addr

(Optional) IPV4 source address

detail

(Optional) Show detail information of adjacency entries

summary

(Optional) Show adjacency summary

non-best

(Optional) Show both best/non-best entries

throttle

(Optional) Throttle

statistics

(Optional) Show adjacency statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Show adjacency entries for all vrfs

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name-out

(Optional) VRF name

invalid_pkt_cnt

(Optional) Invalid packet count

invalid_byte_cnt

(Optional) Invalid byte count

global_drop_pkt_cnt

(Optional) Global drop packet count

global_drop_byte_cnt

(Optional) Global drop byte count

global_punt_pkt_cnt

(Optional) Global packet punt count

global_punt_byte_cnt

(Optional) Global byte punt count

global_glean_pkt_cnt

(Optional) Global glean packet count

global_glean_byte_cnt

(Optional) Global glean byte count

glean_pkt_cnt

(Optional) Glean packet count

glean_byte_cnt

(Optional) Glean byte count

normal_pkt_cnt

(Optional) Packet count

normal_byte_cnt

(Optional) Byte count

last_updated

(Optional) Last updated

count-static

(Optional) Count static

count-dynamic

(Optional) Count dynamic

count-others

(Optional) Count others

count-throttle

(Optional) Count throttle

count-total

(Optional) Count total

TABLE_afi

(Optional) TABLR afi

afi

(Optional) afi

count

(Optional) count

TABLE_adj

(Optional) Adjacency table

intf-out

(Optional) Interface

phy-intf

(Optional) Physical interface

ip-addr-out

(Optional) IP address

mac

(Optional) MAC address

pref

(Optional) Preference

owner

(Optional) Owner

pkt-count

(Optional) Packet count

byte-count

(Optional) Byte count

is-best

(Optional) Best

is-thrtld

(Optional) Throttled

Command Mode

- /exec

show ip amt relay

show { ip | ipv6 } amt relay [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <tut> <ra> <nds> <ldn> <nts> <lrn> <lra> <lq> <uc> <rc4> <rc6> ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

amt

AMT show commands

relay

Display status information about the AMT Relay

__readonly__

(Optional)

TABLE_vrf

(Optional)

tut

(Optional)

ra

(Optional)

vrf

(Optional)

nds

(Optional)

ldn

(Optional)

nts

(Optional)

lrn

(Optional)

lra

(Optional)

lq

(Optional)

uc

(Optional)

rc4

(Optional)

rc6

(Optional)

Command Mode

- /exec

show ip amt route

show { ip | ipv6 } amt route [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <rc4> <rc6> { TABLE_route <addrs> <if> <nbr> <gwa> <gw_exp> } ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

amt

AMT show commands

route

Display multicast routes learned via AMT

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

rc4

(Optional)

rc6

(Optional)

TABLE_route

(Optional)

addrs

(Optional)

if

(Optional)

nbr

(Optional)

gwa

(Optional)

gw_exp

(Optional)

Command Mode

- /exec

show ip amt tunnel

show ip amt tunnel [ <address4> <port> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <tc4> { TABLE_tunnel <gwa> <gwp> <ut> <ld> <lr> <rc> <exp> { TABLE_route <source> <group> <rexp> } } ]

Syntax Description

show

Show running system information

amt

AMT show commands

ip

Display IP information

tunnel

Display tunnel information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

address4

(Optional) IP address of tunnel endpoint

port

(Optional) UDP port number of gateway

detail

(Optional) Display routes joined by tunnel endpoint

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

tc4

(Optional)

TABLE_tunnel

(Optional)

gwa

(Optional)

gwp

(Optional)

ut

(Optional)

ld

(Optional)

lr

(Optional)

rc

(Optional)

exp

(Optional)

TABLE_route

(Optional)

source

(Optional)

group

(Optional)

rexp

(Optional)

Command Mode

- /exec

show ip arp

show ip arp [ [ [ <ip-address> | [ sync-entries | fhrp-non-active-learn ] [ detail ] | static | summary | [ summary ] <interface> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <cnt-resolved> ] [ <cnt-incomplete> ] [ <cnt-thrtld-incomplete> ] [ <cnt-unknown> ] [ <cnt-total> ] [ TABLE_adj <intf-out> <ip-addr-out> [ <time-stamp> ] { <mac> | <unknown> | <incomplete> } [ <phy-intf> ] [ <flags> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

summary

(Optional) Display ARP adjacency summary

detail

(Optional) Display detailed information

sync-entries

(Optional) Display ARP table learnt only due to arp table sync

fhrp-non-active-learn

(Optional) Display ARP table learnt only due to request for non-active FHRP address

interface

(Optional) ARP interface

ip-address

(Optional) IP address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display ARP entries for all vrfs

static

(Optional) Display Static ARP entries

__readonly__

(Optional)

TABLE_vrf

(Optional) Show VRF table

vrf-name-out

(Optional) Show VRF name

cnt-resolved

(Optional) Show total resolved ARP entries

cnt-incomplete

(Optional) Show total incomplete ARP entreis

cnt-thrtld-incomplete

(Optional) Show total incomplete throttled entries

cnt-unknown

(Optional) Show total unknow entris

cnt-total

(Optional) Show total

TABLE_adj

(Optional) Show IP ARP

intf-out

(Optional) Show interface

ip-addr-out

(Optional) Show ip address

time-stamp

(Optional) Show age of adjacency

mac

(Optional) Show mac

unknown

(Optional) Show unknown entry

incomplete

(Optional) Show incomplete entry

phy-intf

(Optional) Show physical interface

flags

(Optional) Show flags

Command Mode

- /exec

show ip arp anycast topo-info

show ip arp anycast topo-info [ <topo-id> ] [ __readonly__ { TABLE_ip_arp_anycast_topo_info [ <ip_arp_anycat_topo_id> ] [ <ip_arp_anycast_feature> ] [ <ip_arp_anycast_mode> ] } ]

Syntax Description

show

Show running system information

ip

Configure IP features

arp

Configure ARP parameters

anycast

anycast feature info

topo-info

Per topology specific information

topo-id

(Optional) Topology ID (VLAN-ID or BD-ID)

__readonly__

(Optional)

TABLE_ip_arp_anycast_topo_info

(Optional) Show ip arp anycast topo-info

ip_arp_anycat_topo_id

(Optional) Show ARP anycast topo-id

ip_arp_anycast_feature

(Optional) Show ARP anycast feature

ip_arp_anycast_mode

(Optional) Show ARP anycast mode

Command Mode

- /exec

show ip arp client

show ip arp client [ __readonly__ { <arp-clients> } [ TABLE_arp_client_list { <arp-cli-uuid> <l2-client-type> <client-flg> <mts-addr-sap> <cli-msg-cnt> [ <l2-cli-func-name> ] [ <l2-cli-dbg-func> ] [ <l2-cli-dbg-un-init-func> ] } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

client

Display ARP Client table

__readonly__

(Optional)

arp-clients

(Optional) Number of ARP Clients

TABLE_arp_client_list

(Optional) Show ip arp client

arp-cli-uuid

(Optional) Protocol uuid

l2-client-type

(Optional) Client type

client-flg

(Optional) Flags

mts-addr-sap

(Optional) SAP

cli-msg-cnt

(Optional) Client message count

l2-cli-func-name

(Optional) Received function

l2-cli-dbg-func

(Optional) Debug init function

l2-cli-dbg-un-init-func

(Optional) Debug Un-init function

Command Mode

- /exec

show ip arp controller-statistics

show ip arp controller-statistics [ __readonly__ { TABLE_ip_arp_controller_statistics [ <arp_adj_controller_add_count> ] [ <arp_adj_controller_del_count> ] [ <arp_adj_controller_add_err_count> ] [ <arp_adj_controller_del_err> ] } ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

controller-statistics

Controller statistics

__readonly__

(Optional)

TABLE_ip_arp_controller_statistics

(Optional) Show controller-statistics

arp_adj_controller_add_count

(Optional)

arp_adj_controller_del_count

(Optional)

arp_adj_controller_add_err_count

(Optional)

arp_adj_controller_del_err

(Optional)

Command Mode

- /exec

show ip arp esi

show ip arp esi [ __readonly__ { TABLE_ip_arp_esi [ <ip_arp_esi_interface> ] [ <ip_arp_esi_value> ] } ]

Syntax Description

show

Show running system information

ip

Configure IP features

arp

Configure ARP parameters

esi

ESI information

__readonly__

(Optional)

TABLE_ip_arp_esi

(Optional) Show ip arp esi

ip_arp_esi_interface

(Optional) Interface

ip_arp_esi_value

(Optional) Values

Command Mode

- /exec

show ip arp inspection

show ip arp inspection [ __readonly__ <src_mac_valid> <dest_mac_valid> <ip_addr_valid> TABLE_entry <active_vlan_id> <is_insp_enabled> <oper_state> [ <acl_name> ] [ [ <acl_logging> ] <dhcp_logging> ] [ <req_fwded> <res_fwded> <req_dropped> <res_dropped> <dhcp_drops> <acl_drops> <dhcp_permits> <acl_permits> <req_smac_fails> <res_smac_fails> <res_dmac_fails> <req_ip_fails> <res_ip_fails> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

__readonly__

(Optional) read only

src_mac_valid

(Optional) source ethernet address in header must be same as sender mac address in arp payload

dest_mac_valid

(Optional) destination ethernet address in header must be same as target mac address in arp payload

ip_addr_valid

(Optional) validate the target ip address to filter broadcast/multicast address in arp payload

TABLE_entry

(Optional)

active_vlan_id

(Optional) active vlan id

is_insp_enabled

(Optional)

oper_state

(Optional)

acl_name

(Optional)

acl_logging

(Optional)

dhcp_logging

(Optional)

Command Mode

- /exec

show ip arp inspection interfaces

show ip arp inspection interfaces [ <intf1> ] [ __readonly__ <intf_header> [ TABLE_intf <intf2> <trust_state> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

interfaces

Trust status of all interfaces

intf1

(Optional) interface

__readonly__

(Optional)

TABLE_intf

(Optional)

intf_header

(Optional)

intf2

(Optional)

trust_state

(Optional)

Command Mode

- /exec

show ip arp inspection log

show ip arp inspection log [ __readonly__ <log_buff_size> <log_rate_entries> <log_rate_interval> <log_frame> ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

log

Log Buffer

__readonly__

(Optional)

log_buff_size

(Optional) number of entries per log buffer

log_rate_entries

(Optional) number of entries into log buffer per sec

log_rate_interval

(Optional) time after which log buffer is updated in sec

log_frame

(Optional) log frames in buffer

Command Mode

- /exec

show ip arp inspection statistics

show ip arp inspection statistics [ vlan <vlan-range> ] [ __readonly__ TABLE_stats <vlanid> <req_fwded> <res_fwded> <req_dropped> <res_dropped> <dhcp_drops> [ <acl_drops> ] <dhcp_permits> [ <acl_permits> ] <req_smac_fails> <res_smac_fails> <res_dmac_fails> <req_ip_fails> <res_ip_fails> ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

statistics

Status of ARP Inspection

vlan

(Optional) Selected vlan range

vlan-range

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional)

TABLE_stats

(Optional)

vlanid

(Optional) ip arp inspection vlan id

Command Mode

- /exec

show ip arp inspection vlan

show ip arp inspection { vlan <vlan-range> } [ __readonly__ <src_vlan_mac_valid> <dest_vlan_mac_valid> <ip_vlan_addr_valid> TABLE_vlan <active_vlan_id> <is_insp_enabled> <oper_state> [ <dhcp_logging> ] [ <acl_name> ] [ <acl_logging> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

vlan

Selected vlan range

vlan-range

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional)

src_vlan_mac_valid

(Optional) validates header source mac address with sender mac address in arp payload

dest_vlan_mac_valid

(Optional) validates header destination mac address with target mac address in arp payload

ip_vlan_addr_valid

(Optional) filters invalid ip addresses like multicast/broadcast in arp requests/responses

TABLE_vlan

(Optional)

active_vlan_id

(Optional) active vlan id

is_insp_enabled

(Optional) ip arp inspection on vlan

oper_state

(Optional) operational on vlan

acl_name

(Optional) arp inspection access list name

acl_logging

(Optional) acl logging options

dhcp_logging

(Optional) ip arp inspection dhcp-binding logging options

Command Mode

- /exec

show ip arp multihoming-statistics

show ip arp multihoming-statistics [ <interface> ] [ interface-all ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out2> TABLE_stat <ps-recv-add-l2rib> <ps-proc-add-l2rib> <ps-recv-del-l2rib> <ps-proc-del-l2rib> <ps-recv-pc-shut-l2rib> <ps-proc-pc-shut-l2rib> <ps-recv-remote-upd-l2rib> <ps-proc-remote-upd-l2rib> <ps-add-err-invalid-flags> <ps-del-err-invalid-flags> <ps-add-err-invalid-curr-state> <ps-del-err-invalid-curr-state> <ps-del-err-mac-mismatch> <ps-del-err-sec-del> <ps-del-err-tl-route> <tl-del-err-psro-route> ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

multihoming-statistics

Display ARP Multihoming stats

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display ARP Multihoming statistics for all vrfs

interface-all

(Optional) Display ARP Multihoming statistics for all interface

interface

(Optional) ARP interface

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name-out2

(Optional) VRF name

TABLE_stat

(Optional) Show ip arp multihoming statistics

ps-recv-add-l2rib

(Optional) Receieved ADD from L2RIB

ps-recv-del-l2rib

(Optional) Receieved DEL from L2RIB

ps-recv-remote-upd-l2rib

(Optional) Receieved remote UPD from L2RIB

ps-recv-pc-shut-l2rib

(Optional) Receieved PC shut from L2RIB

ps-proc-add-l2rib

(Optional) Processed ADD from L2RIB

ps-proc-del-l2rib

(Optional) Processed DEL from L2RIB

ps-proc-remote-upd-l2rib

(Optional) Processed remote UPD from L2RIB

ps-proc-pc-shut-l2rib

(Optional) Processed PC shut from L2RIB

ps-add-err-invalid-flags

(Optional) Multihoming ADD error invalid flag

ps-del-err-invalid-flags

(Optional) Multihoming DEL error invalid flag

ps-add-err-invalid-curr-state

(Optional) Multihoming ADD error invalid current state

ps-del-err-invalid-curr-state

(Optional) Multihoming DEL error invalid current state

ps-del-err-mac-mismatch

(Optional) Peer sync DEL error MAC mismatch

ps-del-err-tl-route

(Optional) Peer sync DEL error second delete

tl-del-err-psro-route

(Optional) True local DEL error deleteing PS RO route

ps-del-err-sec-del

(Optional) Peer sync DEL error second delete

Command Mode

- /exec

show ip arp off-list

show ip arp off-list [ { vlan | bdi } <vlan-id> ] [ __readonly__ [ <offlist-vlan-id> <vlan-adj-cnt> ] [ <arp-sync-adj-cnt> ] { TABLE_arp_vlan_list <adj-vlan-id> <off-adj-ip-addr> <time-stamp> <arp-mac-addr> <off-adj-flags> } ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

off-list

Show adjacencies in off-list arp database

vlan

(Optional) Vlan id

bdi

(Optional) Bridge Domain Name/Id

vlan-id

(Optional) Show information for specified vlan

__readonly__

(Optional)

offlist-vlan-id

(Optional) Show ip arp offlist vlan-id

vlan-adj-cnt

(Optional) Show ip arp vlan adjacency count

arp-sync-adj-cnt

(Optional) Show arp sync adjacency count

TABLE_arp_vlan_list

(Optional) Show ip arp vlan list

adj-vlan-id

(Optional) Show ip arp adjacency vlan id

off-adj-ip-addr

(Optional) Show arp offlist adjacency ip address

time-stamp

(Optional) Show duration

arp-mac-addr

(Optional) Show mac address

off-adj-flags

(Optional) show offlist adjacencyy flgs

Command Mode

- /exec

show ip arp open-flow error-statistics

show ip arp open-flow error-statistics [ __readonly__ { TABLE_ip_arp_open_flow_error_statistics [ <arp_ofa_total_err_cnt> ] [ <arp_ofa_dp_adj_err_on_del> ] [ <arp_ofa_cp_mac_mismatch_err_on_del> ] [ <arp_ofa_cp_null_mac_err_on_del> ] [ <arp_ofa_cp_no_adj_err_on_del_flag> ] [ <arp_ofa_cp_cp_nh_mismatch_err_on_del> ] [ <arp_ofa_cp_adj_del_failure_err> ] [ <arp_ofa_cp_null_mac_err_on_add> ] [ <arp_ofa_cp_dp_mac_mismatch_err_on_add> ] [ <arp_ofa_cp_cp_mac_mismatch_err_on_add> ] [ <arp_ofa_cp_added_first_err> ] [ <arp_ofa_dp_overwrite_cp_err> ] [ <arp_ofa_dp_cp_nh_mismatch_err_on_add> ] [ <arp_ofa_cp_cp_nh_mismatch_err_on_add> ] [ <arp_ofa_cp_dp_nh_mismatch_err_on_add> ] [ <arp_ofa_cp_adj_add_failure_err> ] [ <arp_ofa_barrier_response_err> ] } ]

Syntax Description

show

Show running system information

ip

Configure IP features

arp

Configure ARP parameters

open-flow

open flow

error-statistics

IR mode specific adjacency statistics

__readonly__

(Optional)

TABLE_ip_arp_open_flow_error_statistics

(Optional) ARP Open Flow Error Statistics

arp_ofa_total_err_cnt

(Optional) OFA total error count

arp_ofa_dp_adj_err_on_del

(Optional) Controller Deleting DP adjacency error

arp_ofa_cp_mac_mismatch_err_on_del

(Optional) CP adjacency MAC mismatch error while delete

arp_ofa_cp_null_mac_err_on_del

(Optional) CP adjacency NULL mac error while delete

arp_ofa_cp_no_adj_err_on_del_flag

(Optional) No adjacency found while delete

arp_ofa_cp_cp_nh_mismatch_err_on_del

(Optional) CP adjacency NH mismatch error while delete

arp_ofa_cp_adj_del_failure_err

(Optional) Other errors while deleting

arp_ofa_cp_null_mac_err_on_add

(Optional) CP adjacency NULL mac error while Adding

arp_ofa_cp_dp_mac_mismatch_err_on_add

(Optional) DP adjacency present with different mac

arp_ofa_cp_cp_mac_mismatch_err_on_add

(Optional) CP adjacency present with different mac

arp_ofa_cp_added_first_err

(Optional) CP adjacency added first

arp_ofa_dp_overwrite_cp_err

(Optional) Overwriting CP adjacency with DP

arp_ofa_dp_cp_nh_mismatch_err_on_add

(Optional) DP adjacency already present with different NH

arp_ofa_cp_cp_nh_mismatch_err_on_add

(Optional) CP adjacency already present with different NH

arp_ofa_cp_dp_nh_mismatch_err_on_add

(Optional) Overwriting CP adj with DP with different NH

arp_ofa_cp_adj_add_failure_err

(Optional) Other errors while adding

arp_ofa_barrier_response_err

(Optional) Barrier responses

Command Mode

- /exec

show ip arp statistics

show ip arp statistics [ <interface> ] [ interface-all ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out1> [ TABLE_stat <tx-total> <tx-req> <tx-reply> <tx-req-l2> <tx-reply-l2> <tx-grat> <tx-tunnel> <tx-drop> [ <tx-srvrport> ] [ <tx-fbrcport> ] [ <tx-fixup-core> ] [ <tx-fixup-server> ] [ <tx-fixup-rarp> ] [ <tx-anycast-glean> ] <tx-mbuf-fail> <tx-ctxt-not-crtd> <tx-bad-ctxt-id> <tx-invalid-ifindex> <tx-invalid-sip> <tx-invalid-dip> <tx-own-ip> <tx-unattached-ip> <tx-adj-create-fail> <tx-null-sip> <tx-null-smac> <tx-client-enq-fail> <tx-dest-unreachable-proxy-arp> <tx-dest-unreachable-enhanced-proxy> <tx-dest-l2port-track> <tx-invalid-local-proxy> <tx-invalid-proxy> <tx-vip-not-active> <rx-total> <rx-req> <rx-reply> <rx-req-l2> <rx-reply-l2> <rx-proxy> <rx-local-proxy> <rx-enhanced-proxy> <rx-enhanced-proxy-anycast> <rx-enhanced-proxy-l2port-track> <rx-tunnel> <rx-fastpath> <rx-snoop> <rx-drop> <rx-srvrport> <bad-if> <bad-len> <invalid-prot> <invalid-hrd-type> <invalid-ctxt> <ctxt-not-crtd> <invalid-l2> <invalid-l3> <invalid-sip> <our-sip> <arp-if-no-mem> <subnet-mismatch> <dir-bcast> <invalid-dip> <non-local-dst> <non-active-fhrp> <invalid-smac> <our-smac> <not-init> <l2-prxy-en> <l2-port-untrusted> <stdby-fhrp-vip> <grat-prxy-en> <arp-req-ignore> <l2-intf> <l2fm-query-fail> <tunnel_fail> [ <hsrp-active-vmac> ] [ <rx-intf-down> ] <recv-glean-count> <refresh-req-from-clients> <l2rib-signals> <adds> <dels> <timeouts> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

statistics

Display ARP statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display ARP statistics for all vrfs

interface-all

(Optional) Display ARP statistics for all interface

interface

(Optional) ARP interface

__readonly__

(Optional)

TABLE_vrf

(Optional) Table Vrf

vrf-name-out1

(Optional) Show VRF name

TABLE_stat

(Optional) Show IP ARP statistics

tx-total

(Optional) Sent: total

tx-req

(Optional) Sent: request

tx-reply

(Optional) Sent: reply

tx-req-l2

(Optional) Sent: request on L2

tx-reply-l2

(Optional) Sent: replay on L2

tx-grat

(Optional) Sent: gratuitous

tx-tunnel

(Optional) Sent: tunnel packet

tx-drop

(Optional) Sent:Dropped packet

tx-srvrport

(Optional) Sent from Server Port

tx-fbrcport

(Optional) Sent from Fabric Port

tx-fixup-core

(Optional) Sent: fixup core

tx-fixup-server

(Optional) Sent: fixup server

tx-fixup-rarp

(Optional) Sent: fixup rarp

tx-anycast-glean

(Optional) Sent: modified anycast glean

tx-mbuf-fail

(Optional) Sent:MBUF operation failed

tx-ctxt-not-crtd

(Optional) Sent:Context not yet created

tx-bad-ctxt-id

(Optional) Sent:Invalid context

tx-invalid-ifindex

(Optional) Sent:Invalid ifindex

tx-invalid-sip

(Optional) Sent:Invalid SRC IP

tx-invalid-dip

(Optional) Sent:Invalid DEST IP

tx-own-ip

(Optional) Sent:Destination is our own IP

tx-unattached-ip

(Optional) Sent:Unattached IP

tx-adj-create-fail

(Optional) Sent:Adjacency Couldn't be added

tx-null-sip

(Optional) Sent:Null Source IP

tx-null-smac

(Optional) Sent: Null Source MAC

tx-client-enq-fail

(Optional) Sent: Client Enqueue Failed

tx-dest-unreachable-proxy-arp

(Optional) Sent: Dest. not reachable for proxy arp

tx-dest-unreachable-enhanced-proxy

(Optional) Sent:Dest. unreachable for enhanced proxy

tx-dest-l2port-track

(Optional) Sent:Dest. on L2 port being tracked

tx-invalid-local-proxy

(Optional) Sent:Invalid Local proxy arp

tx-invalid-proxy

(Optional) Sent:Invalid proxy arp

tx-vip-not-active

(Optional) Sent:VIP is not active

rx-total

(Optional) Received: total

rx-req

(Optional) Received: Requests

rx-reply

(Optional) Received: Replies

rx-req-l2

(Optional) Received: Requests on L2

rx-reply-l2

(Optional) Received: Replies on L2

rx-proxy

(Optional) Received: Proxy arp

rx-local-proxy

(Optional) Received: Local-Proxy arp

rx-enhanced-proxy

(Optional) Received: Enhanced Proxy arp

rx-enhanced-proxy-anycast

(Optional) Received: Anycast proxy Proxy arp

rx-enhanced-proxy-l2port-track

(Optional) Received: L2 Port-track Proxy arp

rx-tunnel

(Optional) Received: Tunneled

rx-fastpath

(Optional) Received: Fastpath

rx-snoop

(Optional) Received: Snooped

rx-drop

(Optional) Received: Dropped

rx-srvrport

(Optional) Received: on Server Port

bad-if

(Optional) Appeared on a wrong interface

bad-len

(Optional) Incorrect length

invalid-prot

(Optional) Invalid protocol packet

invalid-hrd-type

(Optional) Invalid Hardware type

invalid-ctxt

(Optional) Invalid context

ctxt-not-crtd

(Optional) Context not yet created

invalid-l2

(Optional) Invalid layer 2 address length

invalid-l3

(Optional) Invalid layer 3 address length

invalid-sip

(Optional) Invalid source IP address

our-sip

(Optional) Source IP address is our own

arp-if-no-mem

(Optional) No mem to create per intf structure

subnet-mismatch

(Optional) Source address mismatch with subnet

dir-bcast

(Optional) Directed broadcast source

invalid-dip

(Optional) Invalid destination IP address

non-local-dst

(Optional) Non-local destination IP address

non-active-fhrp

(Optional) Non-active FHRP dest IP address. Learn and drop

invalid-smac

(Optional) Invalid source MAC address

our-smac

(Optional) Source MAC address is our own

not-init

(Optional) Received before arp initialization

l2-prxy-en

(Optional) L2 packet on proxy-arp-enabled interface

l2-port-untrusted

(Optional) L2 packet on untrusted L2 port

stdby-fhrp-vip

(Optional) Packet with VIP on standby FHRP

grat-prxy-en

(Optional) Grat arp received on proxy-arp-enabled interface

arp-req-ignore

(Optional) Requests came for exising entries

l2-intf

(Optional) Requests came on a L2 interface

l2fm-query-fail

(Optional) L2FM query failed for a L2 Address

tunnel_fail

(Optional) Dropping due to tunneling failures

hsrp-active-vmac

(Optional) Dropping due to HSRP standby receiving HSRP active vmac

rx-intf-down

(Optional) Received Interface Down

recv-glean-count

(Optional) Glean requests recv count

refresh-req-from-clients

(Optional) Refresh requests received from clients

l2rib-signals

(Optional) Signals received from L2rib

adds

(Optional) Adds

dels

(Optional) Deletes

timeouts

(Optional) Timeouts

Command Mode

- /exec

show ip arp suppression-cache

show ip arp suppression-cache { detail [ vlan <vlan_id> ] | summary | statistics | vlan <vlan_id> | local [ vlan <vlan_id> ] | remote [ vlan <vlan_id> ] } [ __readonly__ TABLE_arp-suppression [ TABLE_entries <ip-addr> <age> <mac> <vlan> <physical-iod> <flag> [ <remote-vtep-addr> ] ] [ TABLE_summary <remote-count> <local-count> <total-count> ] [ TABLE_stats TABLE_suppressed <total> <requests> <requests-on-l2> <gratuitous> <gratuitous-on-l2> TABLE_forwarded <total-sent> <requests-sent> <replies-sent> <requests-on-core-sent> <replies-on-core-sent> <dropped-sent> <requests-on-l2-sent> <replies-on-l2-sent> <requests-on-core-l2-sent> <replies-on-core-l2-sent> <dropped-l2-sent> TABLE_received <total-recv> <requests-recv> <replies-recv> <local-requests-recv> <local-replies-recv> <gratuitous-recv> <dropped-recv> <requests-on-l2-recv> <replies-on-l2-recv> <gratuitous-l2-recv> <dropped-l2-recv> TABLE_entrystats <adds> <dels> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

suppression-cache

arp-suppression-cache

detail

show details

summary

show summary

statistics

show statistics

local

show local entries

remote

show remote entries

vlan

(Optional) L2vlan

vlan_id

(Optional) Vlan

__readonly__

(Optional)

TABLE_arp-suppression

(Optional) IP ARP suppression-cache

TABLE_entries

(Optional) IP ARP suppression entries

ip-addr

(Optional) IP address

age

(Optional) Age

mac

(Optional) MAC address

vlan

(Optional) vlan id

physical-iod

(Optional) Physical iod

flag

(Optional) Flags

remote-vtep-addr

(Optional) Remote Vtep Address

TABLE_summary

(Optional) IP ARP suppression-cache Summary

remote-count

(Optional) Remote count

local-count

(Optional) Local count

total-count

(Optional) Total count

TABLE_stats

(Optional) Show IP ARP suppression statistics

TABLE_suppressed

(Optional) Suppressed table

total

(Optional) total

requests

(Optional) request

requests-on-l2

(Optional) requests-on-l2

gratuitous

(Optional) gratuitous

gratuitous-on-l2

(Optional) gratuitous-on-l2

TABLE_forwarded

(Optional) Forwarded table

total-sent

(Optional) total

requests-sent

(Optional) Requests sent on L3

replies-sent

(Optional) Replies sent on L3

requests-on-core-sent

(Optional) Request on core port

replies-on-core-sent

(Optional) Reply on core port

dropped-sent

(Optional) Dropped

requests-on-l2-sent

(Optional) Requests on L2

replies-on-l2-sent

(Optional) Replies on L2

requests-on-core-l2-sent

(Optional) Request on core port L2

replies-on-core-l2-sent

(Optional) Reply on core port L2

dropped-l2-sent

(Optional) Dropped on L2

TABLE_received

(Optional) Received

total-recv

(Optional) Total

requests-recv

(Optional) Requests on L3 mode

replies-recv

(Optional) Replies on L3 mode

local-requests-recv

(Optional) Local Request

local-replies-recv

(Optional) Local Responses

gratuitous-recv

(Optional) Gratuitous on L3 mode

dropped-recv

(Optional) Dropped on L3 mode

requests-on-l2-recv

(Optional) Requests on L2 mode

replies-on-l2-recv

(Optional) Replies on L2 mode

gratuitous-l2-recv

(Optional) Gratuitous on L2 mode

dropped-l2-recv

(Optional) Dropped on L2 mode

TABLE_entrystats

(Optional) ARP suppression-cache Local entry statistics

adds

(Optional) Adds

dels

(Optional) Deletes

Command Mode

- /exec

show ip arp suppression topo-info

show ip arp suppression topo-info [ <topo-id> ] [ __readonly__ { TABLE_ip_arp_suppression_topo_info [ <ip_arp_suppression_topo_id> ] [ <ip_arp_suppression_mode> ] [ <ip_arp_suppression_hmm_mode> ] } ]

Syntax Description

show

Show running system information

ip

Configure IP features

arp

Configure ARP parameters

suppression

ARP-suppression based event

topo-info

E-VPN identifier

topo-id

(Optional) E-VPN identifier (VLAN-ID or BD-ID)

__readonly__

(Optional)

TABLE_ip_arp_suppression_topo_info

(Optional) Show suppression topo-info

ip_arp_suppression_topo_id

(Optional) Show ARP suppression topo_id

ip_arp_suppression_mode

(Optional) Show ARP suppression mode

ip_arp_suppression_hmm_mode

(Optional) Show ARP suppression hmm mode

Command Mode

- /exec

show ip arp tunnel-statistics

show ip arp tunnel-statistics [ __readonly__ { TABLE_ip_arp_tunnel_stat [ <arp-tun-pkt-rcv-cnt> ] [ <arp-tun-pkt-rcv-ing-vpc> ] [ <arp-tun-pkt-rcv-ing-gpc> ] [ <arp-tun-pkt-rcv-ing-orp-vpc> ] [ <arp-tun-pkt-rcv-ing-orp-vpc-pl> ] [ <arp-tun-pkt-snd-cnt> ] [ <arp-tun-pkt-snd-snoop-cnt> ] [ <arp-tun-pkt-snd-non-local-vip-cnt> ] [ <arp-tun-pkt-snd-peer-gate-cnt> ] [ <arp-tun-pkt-snd-ing-vpc> ] [ <arp-tun-pkt-snd-ing-gpc> ] [ <arp-tun-pkt-snd-ing-orp-vpc> ] [ <arp-tun-pkt-snd-ing-orp-vpc-pl> ] [ <arp-tun-pkt-rcv-drp-cnt> ] [ <arp-tun-pkt-snd-drp-cnt> ] [ <arp-tun-pkt-snd-drp-snd-fail-cnt> ] [ <arp-tun-pkt-rcv-drp-ver-cnt> ] [ <arp-tun-pkt-rcv-drp-pl-cnt> ] [ <arp-tun-pkt-rcv-drp-ing-non-mct> ] [ <arp-tun-pkt-rcv-drp-inv-ing-intf> ] [ <arp-tun-pkt-snd-drp-inv-ing-intf> ] [ <arp-tun-pkt-rcvdrp-inv-gpc-core-sw> ] [ <arp-tun-pkt-rcvdrp-inv-gpc-peer-sw> ] [ <arp-tun-pkt-drp-inv-mcec> ] [ <arp-tun-pkt-im-api-fail> ] [ <arp-tun-pkt-drp-ctxt-inv> ] [ <arp-tun-pkt-drp-mct-dwn> ] [ <arp-tun-pkt-rcv-drp-mbuf-op-fail> ] [ <arp-tun-pkt-snd-drp-mbuf-op-fail> ] [ <arp-tun-pkt-snd-drp-tunnel> ] [ <arp-tun-pkt-snd-drp-ce> ] [ <arp-tun-pkt-snd-drp-inv-gpc> ] [ <arp-tun-pkt-rcv-drp-inv-gpc> ] [ <arp-tun-pkt-sys-mcecm-key-not-found> ] } ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

tunnel-statistics

Display ARP statistics for tunneled packets

__readonly__

(Optional)

TABLE_ip_arp_tunnel_stat

(Optional) ARP Tunnel statistics

arp-tun-pkt-rcv-cnt

(Optional) Total tunneled packets received

arp-tun-pkt-rcv-ing-vpc

(Optional) Tunneled packets rx for ingress vPC

arp-tun-pkt-rcv-ing-gpc

(Optional) Tunneled packets rx for ingress GPC

arp-tun-pkt-rcv-ing-orp-vpc

(Optional) Tunneled Packets rx for ingress orphan vPC

arp-tun-pkt-rcv-ing-orp-vpc-pl

(Optional) Tunneled Packets rx for ingress orphan vPC+

arp-tun-pkt-snd-cnt

(Optional) Total tunneled packets sent

arp-tun-pkt-snd-snoop-cnt

(Optional) Tunneled packets Sent for ARP Snoop

arp-tun-pkt-snd-non-local-vip-cnt

(Optional) Tunneled packets sent for Non-Local VIP

arp-tun-pkt-snd-peer-gate-cnt

(Optional) Tunneled Packets sent for Peer Gateway

arp-tun-pkt-snd-ing-vpc

(Optional) Tunneled packets tx for ingress vPC

arp-tun-pkt-snd-ing-gpc

(Optional) Tunneled packets tx for ingress GPC

arp-tun-pkt-snd-ing-orp-vpc

(Optional) Tunneled Packets tx for ingress orphan vPC

arp-tun-pkt-snd-ing-orp-vpc-pl

(Optional) Tunneled Packets tx for ingress orphan vPC+

arp-tun-pkt-rcv-drp-cnt

(Optional) Total tunnel packets recv dropped

arp-tun-pkt-snd-drp-cnt

(Optional) Total tunnel packets send dropped

arp-tun-pkt-snd-drp-snd-fail-cnt

(Optional) Drops due to send failed

arp-tun-pkt-rcv-drp-ver-cnt

(Optional) Received packet with invalid version

arp-tun-pkt-rcv-drp-pl-cnt

(Optional) Received packet with invalid payload type

arp-tun-pkt-rcv-drp-ing-non-mct

(Optional) Received packet on non mct interface

arp-tun-pkt-rcv-drp-inv-ing-intf

(Optional) Received packet with invalid ingress port

arp-tun-pkt-snd-drp-inv-ing-intf

(Optional) Drop send packets for invalid ingress port

arp-tun-pkt-rcvdrp-inv-gpc-core-sw

(Optional) Drop recv pkt, invalid GPC of core switch

arp-tun-pkt-rcvdrp-inv-gpc-peer-sw

(Optional) Drop recv pkt, invalid GPC of peer switch

arp-tun-pkt-drp-inv-mcec

(Optional) Failed to retrieve vPC ID while processing

arp-tun-pkt-im-api-fail

(Optional) IM api failed while processing

arp-tun-pkt-drp-ctxt-inv

(Optional) Drop tunnel packet as context is invalid

arp-tun-pkt-drp-mct-dwn

(Optional) Drop tunnel packet as mct is down

arp-tun-pkt-rcv-drp-mbuf-op-fail

(Optional) Drop recv packets as mbuf operation failed

arp-tun-pkt-snd-drp-mbuf-op-fail

(Optional) Drop send packets as mbuf operation failed

arp-tun-pkt-snd-drp-tunnel

(Optional) Cannot tunnel a incoming tunneled packet

arp-tun-pkt-snd-drp-ce

(Optional) Cannot tunnel in a CE network

arp-tun-pkt-snd-drp-inv-gpc

(Optional) Drop send pkt, failed in retrieving the GPC

arp-tun-pkt-rcv-drp-inv-gpc

(Optional) Drop recv pkt, failed in retrieving the GPC

arp-tun-pkt-sys-mcecm-key-not-found

(Optional) MCEC_ID to PHY_IF_INDEX not found in DB

Command Mode

- /exec

show ip arp vpc-statistics

show ip arp vpc-statistics [ __readonly__ { TABLE_arp_vpc_stats [ <arp-pro-drp-pull-disable> ] [ <arp-pro-drp-push-msg-disable> ] [ <arp-pro-ign-snd-pull-disabe> ] [ <arp-ign-snd-push-disable> ] [ <arp-drp-im-fail> ] [ <arp-drp-mcecm-fail> ] [ <arp-drp-invalid-pc-iod> ] [ <arp-drp-pt-lookup-fail> ] [ <arp-drp-resp-fail-no-mct> ] [ <arp-drp-resp-fail> ] [ <arp-mcecm-ifidx-vpc-fail> ] [ <arp-mcecm-vpc-ifidx-fail> ] [ <arp-periodic-mcecm-ifidx-vpc-fail> ] [ <arp-resp-sent> ] [ <arp-resp-recvd> ] [ <arp-resp-recv-err> ] [ <arp-rcvd-msg> ] [ <arp-send-fail> ] [ <arp-cfs-rel-dlvry-fail> ] [ <arp-cfs-rel-dnvry-suc> ] [ <arp-drp-pt-add-fail> ] [ <arp-drp-no-mem> ] [ <arp-drp-tmr-cre-fail> ] [ <arp-drp-add-adj-fail> ] [ <arp-off-drp-pt-lookup-fail> ] [ <arp-dont-drp-vlan-mismat> ] [ <arp-drp-svi-invalid> ] [ <arp-dont-drop-sv-down> ] [ <arp-drp-mct-down> ] [ <arp-drp-ctxt-invalid> ] [ <arp-drp-vrf-invalid> ] [ <arp-drp-l3addr-invalid> ] [ <arp-drp-l3addr-sanity-fail> ] [ <arp-drp-mac-sanity-fail> ] [ <arp-own-rtr-mac> ] [ <arp-drp-own-ipaddr> ] [ <arp-drp-own-vipadd> ] [ <arp-drp-adj-fail> ] [ <arp-drp-subnet-mismatch> ] [ <arp-drp-adj-exist> ] [ <arp-dont-drp-ip-not-enable> ] [ <arp-drp-total-cnt> ] [ <arp-dont-drop-total-cnt> ] [ <arp-drp-inval-phy-iod> ] [ <arp-add-adj> ] [ <arp-del-adj> ] [ <arp-adj-already-exist> ] [ <arp-sync-recv-op-add-adj> ] [ <arp-sync-recv-op-del-adj> ] [ <arp-sync-push-msg-adj-cnt> ] [ <arp-sync-send-op-add-adj> ] [ <arp-sync-send-op-del-adj> ] [ <arp-sync-adj-cnt> ] [ <arp-sync-addadj-fail> ] [ <arp-sync-drp-svi-inv> ] [ <arp-sync-drp-svi-dwn> ] [ <arp-sync-drp-ctxt-inv> ] [ <arp-sync-null-adj> ] [ <arp-sync-invalid-ip> ] [ <arp-periodic-sync-adj-l2-supp-cnt> ] [ <arp-periodic-sync-stop-bcast-pkt-sync-count> ] } ]

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

vpc-statistics

Show vPC global statistics

__readonly__

(Optional)

TABLE_arp_vpc_stats

(Optional) Arp Vpc statistics

arp-mcecm-ifidx-vpc-fail

(Optional) Unable to retrieve VPC id from ifidx

arp-mcecm-vpc-ifidx-fail

(Optional) Unable to retrieve ifidx from VPC id

arp-periodic-mcecm-ifidx-vpc-fail

(Optional) Unable to retrieve ifidx from VPC id during periodic sync

arp-sync-recv-op-add-adj

(Optional) Total adjacencies recieved from peer to add

arp-sync-recv-op-del-adj

(Optional) Total adjacencies received from peer to delete

arp-sync-push-msg-adj-cnt

(Optional) Total gross adjacencies sent periodically

arp-sync-send-op-add-adj

(Optional) Total adjacencies sent to peer to add

arp-sync-send-op-del-adj

(Optional) Total adjacencies sent to peer to delete

arp-sync-adj-cnt

(Optional) Total periodic sync adjacencies

arp-sync-addadj-fail

(Optional) Failure in adding adjacencies while periodic sync send

arp-sync-drp-svi-inv

(Optional) Total drops during periodic sync because of invalid svi

arp-sync-drp-svi-dwn

(Optional) Total drops during periodic sync because of svi down

arp-sync-drp-ctxt-inv

(Optional) Total drops during periodic sync because of invalid context

arp-sync-null-adj

(Optional) Total drops while processsing syne of NULL Adjacencies

arp-sync-invalid-ip

(Optional) Total drops while processing sync because of NULL IP

arp-periodic-sync-adj-l2-supp-cnt

(Optional) Total periodic sync adjacenciesadded for L2 suppression case

arp-periodic-sync-stop-bcast-pkt-sync-count

(Optional) Total Bcast packets that was stopped sync to peer

arp-pro-drp-pull-disable

(Optional) Drop the received CFS pull request

arp-pro-drp-push-msg-disable

(Optional) Drop the received CFS push message

arp-pro-ign-snd-pull-disabe

(Optional) Ignore to send pull request using CFSoE

arp-ign-snd-push-disable

(Optional) Ignore to send push message using CFSoE

arp-drp-im-fail

(Optional) IM api failed while processing CFS payload

arp-drp-mcecm-fail

(Optional) MCECM api failed while processing CFS payload

arp-drp-invalid-pc-iod

(Optional) Invalid MCT port-channel iod

arp-drp-pt-lookup-fail

(Optional) PT lookup failed while processing CFS payload

arp-drp-resp-fail-no-mct

(Optional) Sending CFS response failed due to invalid MCT iod

arp-drp-resp-fail

(Optional) Sending CFS response failed

arp-resp-sent

(Optional) Response sent via CFSoE

arp-resp-recvd

(Optional) Response received via CFSoE

arp-resp-recv-err

(Optional) Response received via CFSoE with errors

arp-rcvd-msg

(Optional) Received message via CFSoE

arp-send-fail

(Optional) Send message failed via CFSoE

arp-cfs-rel-dlvry-fail

(Optional) MCECM send api failed via CFSoE

arp-cfs-rel-dnvry-suc

(Optional) Send message succeeded via CFSoE

arp-drp-pt-add-fail

(Optional) PT add failed while processing offlist

arp-drp-no-mem

(Optional) Memory alloc failed while processing offlist databse

arp-drp-tmr-cre-fail

(Optional) Timer create failed while processing offlist database

arp-drp-add-adj-fail

(Optional) Adjacency addition failed while processing offlist database

arp-off-drp-pt-lookup-fail

(Optional) PT lookup failed while processing offlist database

arp-dont-drp-vlan-mismat

(Optional) VLAN mismatch while processing offlist database

arp-drp-svi-invalid

(Optional) SVI is invalid while processing offlist database

arp-dont-drop-sv-down

(Optional) SVI is down while processing offlist database

arp-drp-mct-down

(Optional) MCT is down while processing offlist database

arp-drp-ctxt-invalid

(Optional) Ctxt_type is invalid while processing offlist database

arp-drp-vrf-invalid

(Optional) VRF is invalid while processing offlist database

arp-drp-l3addr-invalid

(Optional) VRF is invalid while processing offlist database

arp-drp-l3addr-sanity-fail

(Optional) IP address sanity failed

arp-drp-mac-sanity-fail

(Optional) MAC address sanity failed

arp-own-rtr-mac

(Optional) Our own router mac

arp-drp-own-ipaddr

(Optional) Our own ip address

arp-drp-own-vipadd

(Optional) Our own virtual ip address

arp-drp-adj-fail

(Optional) Create adjacency failed

arp-drp-subnet-mismatch

(Optional) Subnet mismatch

arp-drp-adj-exist

(Optional) Entry exists

arp-dont-drp-ip-not-enable

(Optional) IP not enabled on interface

arp-drp-inval-phy-iod

(Optional) Physical interface invalid

arp-drp-total-cnt

(Optional) Total drop count

arp-dont-drop-total-cnt

(Optional) Total don't drop count

arp-add-adj

(Optional) Total adjacency additions

arp-del-adj

(Optional) Total adjacency deletions

arp-adj-already-exist

(Optional) Total adjacencies ignored as already exist

Command Mode

- /exec

show ip as-path-access-list

show ip as-path-access-list [ <aspl-name> | <aspl-cfg-name> ] [ __readonly__ TABLE_aspl <name> <action> <rule> ]

Syntax Description

show

Show running system information

ip

Display IP information

as-path-access-list

List AS path access lists

aspl-name

(Optional) AS path access list name

aspl-cfg-name

(Optional) Known as-path access-list name

__readonly__

(Optional)

TABLE_aspl

(Optional)

name

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ip cache

show ip cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

Syntax Description

show

Show running system information

ip

Display IP information

cache

Display ip cache

brief

Display summary of ip interface status and configuration

detail

Display detailed information of ip interface status and configuration

operational

(Optional) Display only interfaces that are administratively enabled

interface

Display ip related interface information

intf

(Optional) Interface name to display

Command Mode

- /exec

show ip client

show ip client [ <client-name> ] [ __readonly__ [ TABLE_ip_clnt [ TABLE_clnt { <clnt-name> <clnt-uuid> <clnt-pid> <clnt-ext-pid> [ <clnt-proto> ] <clnt-ind> <clnt-cntxt-id> <clnt-mts-sap> <clnt-flg> <clnt-msg-succ-cnt> <clnt-msg-fail-cnt> [ <clnt-recv-fn-name> <clnt-recv-fn> ] } ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

client

Display clients registered with the IP process

client-name

(Optional) Display information for a single IP client

__readonly__

(Optional)

TABLE_ip_clnt

(Optional)

TABLE_clnt

(Optional)

clnt-name

(Optional)

clnt-uuid

(Optional)

clnt-pid

(Optional)

clnt-ext-pid

(Optional)

clnt-proto

(Optional)

clnt-ind

(Optional)

clnt-cntxt-id

(Optional)

clnt-mts-sap

(Optional)

clnt-flg

(Optional)

clnt-msg-succ-cnt

(Optional)

clnt-msg-fail-cnt

(Optional)

clnt-recv-fn-name

(Optional)

clnt-recv-fn

(Optional)

Command Mode

- /exec

show ip community-list

show ip community-list [ <cl_name> ] [ __readonly__ TABLE_cl <name> <action> <rule> ]

Syntax Description

show

Show running system information

ip

Display IP information

community-list

List community-list

cl_name

(Optional) Standard or expanded community-list name

__readonly__

(Optional)

TABLE_cl

(Optional)

name

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ip debug

show ip debug

Syntax Description

show

Show running system information

ip

Display IP information

debug

Display IP debug-filter configuration

Command Mode

- /exec

show ip dhcp global statistics

show ip dhcp global statistics [ __readonly__ <pkts_processed> <pkts_recvd_through_cfsoe> <pkts_fwded> <pkts_cfsoe_fwded> <pkts_dropped> <pkts_dropped_from_untrusted_ports> <pkts_dropped_src_mac_chk_fail> <pkts_dropped_opt82_ins_fail> <pkts_dropped_unknown_op_intf> <pkts_dropped_unknown_pkt> <pkts_dropped_no_trust_inf> <pkts_dropped_unknown_pkt> <pkts_dropped_relay_disable> <pkts_dropped_no_binding_entry> <pkts_dropped_interface_error> <pkts_dropped_max_hops_exceeded> <pkts_dropped_queue_full> ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show information about DHCP

global

DHCP global stats

statistics

Statistics related to DHCP

__readonly__

(Optional) Read only

pkts_processed

(Optional) Packets processed

pkts_recvd_through_cfsoe

(Optional) Packets received through cfsoe

pkts_fwded

(Optional) Packets forwarded

pkts_cfsoe_fwded

(Optional) Packets forwarded on cfsoe

pkts_dropped

(Optional) Total packets dropped

pkts_dropped_from_untrusted_ports

(Optional) Packets dropped from untrusted ports

pkts_dropped_src_mac_chk_fail

(Optional) Packets dropped due to MAC address check failure

pkts_dropped_opt82_ins_fail

(Optional) Packets dropped due to Option 82 insertion failure

pkts_dropped_unknown_op_intf

(Optional) Packets dropped due to o/p intf unknown

pkts_dropped_unknown_pkt

(Optional) Packets dropped which were unknown

pkts_dropped_no_trust_inf

(Optional) Packets dropped due to no trusted ports

pkts_dropped_relay_disable

(Optional) Packets dropped due to dhcp relay not enabled

pkts_dropped_no_binding_entry

(Optional) Packets dropped due to no binding entry

pkts_dropped_interface_error

(Optional) Packets dropped due to interface error/no interface

pkts_dropped_max_hops_exceeded

(Optional) Packets dropped due to max hops exceeded

pkts_dropped_queue_full

(Optional) Packets dropped due to queue full

Command Mode

- /exec

show ip dhcp option82 suboption info interface

show ip dhcp option82 suboption info interface [ <intf> ] [ __readonly__ <intf_header> { TABLE_intf_option82 <intf_name> <option82_status> <suboption_string> <tx_count> } ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show items in DHCP

option82

DHCP option82

suboption

DHCP option82 suboption

info

DHCP option82 suboption information

interface

DHCP option82 suboption information of all interfaces

intf

(Optional) interface

__readonly__

(Optional) Read only

intf_header

(Optional)

TABLE_intf_option82

(Optional)

intf_name

(Optional)

option82_status

(Optional)

suboption_string

(Optional)

tx_count

(Optional)

Command Mode

- /exec

show ip dhcp relay

show ip dhcp relay [ __readonly__ <relay_service_enable> <relay_opt82_enable> <relay_opt82_customize> <relay_subopt_VPN_enable> <relay_subopt_type_cisco_enable> <global_smart-relay_enable> <global_relay_trusted_enable> <relay_trusted_port_enable> <global_src_addr_hsrp_enable> <smart_relay_intfs_hdr> [ TABLE_intf <smart_relay_enabled_intfs> ] <subnet_bcast_intfs_hdr> [ TABLE_intf <subnet_bcast_enabled_intfs> ] <trusted_port_intfs_hdr> [ TABLE_intf <trusted_port_enabled_intfs> ] <relay_src_addr_hsrp_hdr> [ TABLE_intf <src_addr_hsrp_enabled_intfs> ] <relay_address_hdr> [ TABLE_intf <intf> <relay_address> <vrf_name> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show items in DHCP

relay

DHCP relay

__readonly__

(Optional) Read only

relay_service_enable

(Optional)

relay_opt82_enable

(Optional)

relay_opt82_customize

(Optional)

relay_subopt_VPN_enable

(Optional)

relay_subopt_type_cisco_enable

(Optional)

global_smart-relay_enable

(Optional)

global_relay_trusted_enable

(Optional)

relay_trusted_port_enable

(Optional)

global_src_addr_hsrp_enable

(Optional) V4 Relay src-addr hsrp is globally enabled or not

smart_relay_intfs_hdr

(Optional) Smart relay interfaces header

TABLE_intf

(Optional)

smart_relay_enabled_intfs

(Optional) smart-relay enabled interfaces

subnet_bcast_intfs_hdr

(Optional) Subnet broadcast interfaces header

TABLE_intf

(Optional)

subnet_bcast_enabled_intfs

(Optional) subnet_bcast enabled interfaces

trusted_port_intfs_hdr

(Optional) Trusted port interfaces header

TABLE_intf

(Optional)

trusted_port_enabled_intfs

(Optional) trusted_port enabled interfaces

relay_src_addr_hsrp_hdr

(Optional) Header for V4 Relay src-addr enabled interfaces

TABLE_intf

(Optional)

src_addr_hsrp_enabled_intfs

(Optional) source-address hsrp enabled interfaces

relay_address_hdr

(Optional) relay address header

TABLE_intf

(Optional) Table for list of interfaces

intf

(Optional) interface name

relay_address

(Optional) helper address

vrf_name

(Optional) vrf name

Command Mode

- /exec

show ip dhcp relay address

show ip dhcp relay address [ interface <intf-range> ] [ __readonly__ <intf_header> [ TABLE_intf <intf2> <relay_address> <vrf_name> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show DHCP

relay

relay address of the interface

address

DHCP relay address

interface

(Optional) DHCP relay address of the interface

intf-range

(Optional) interface

__readonly__

(Optional) Read only

intf_header

(Optional) interface header

TABLE_intf

(Optional)

intf2

(Optional) interface name

relay_address

(Optional) helper address

vrf_name

(Optional) VRF name

Command Mode

- /exec

show ip dhcp relay information trusted-sources

show ip dhcp relay information trusted-sources [ __readonly__ <header> [ TABLE_intf <intf> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show DHCP

relay

DHCP Relay

information

Relay information

trusted-sources

Relay Trusted Sources

__readonly__

(Optional) Read only

TABLE_intf

(Optional) trusted interface table

header

(Optional) interface header

intf

(Optional) interface name

Command Mode

- /exec

show ip dhcp relay statistics

show ip dhcp relay statistics [ interface <intf> | { interface <intf> serverip <ip-addr-val> [ use-vrf <vrf-name> ] } ] [ __readonly__ [ <msg_stats_hdr> <msg_type_str> <tx_pkts> <rx_pkts> <drops> <msg_type_str_offer> <offer_rx_pkts> <offer_tx_pkts> <offer_drops> <msg_type_str_request> <request_rx_pkts> <request_tx_pkts> <request_drops> <msg_type_str_ack> <ack_rx_pkts> <ack_tx_pkts> <ack_drops> <msg_type_str_release> <release_rx_pkts> <release_tx_pkts> <release_drops> <msg_type_str_decline> <decline_rx_pkts> <decline_tx_pkts> <decline_drops> <msg_type_str_inform> <inform_rx_pkts> <inform_tx_pkts> <inform_drops> <msg_type_str_nack> <nack_rx_pkts> <nack_tx_pkts> <nack_drops> <line> <msg_type_str_total> <total_rx_pkts> <total_tx_pkts> <total_drops> <line_x> ] [ <server_consolidated_hdr> [ TABLE_server_info <server_helper_addr> <server_vrf> <server_total_request> <server_total_response> ] <line_y> ] [ <l3_fwd_hdr> <l3_fwd_rx_pkts> <l3_fwd_tx_pkts> <l3_fwd_drops> <non_dhcp_hdr> <non_dhcp_rx_pkts> <non_dhcp_tx_pkts> <non_dhcp_drops> <drop_hdr> <drop_validation_fail> <drop_relay_disable> <drop_invalid_msg_type> <drop_intf_err> <drop_tx_sock_err> <drop_tx_fail_client_intf> <drop_unknown_op_intf> <drop_l3_unknown_op_intf> <drop_max_hops> <drop_opt82_insert_fail> <drop_malformed> <drop_mct_drop> <drop_untrusted_relay_intf> ] [ <server_discover> <server_request> <server_decline> <server_release> <server_inform> <server_ack> <server_nack> <server_offer> <server_resp_hdr> <drop_unknown> <server_req_hdr> ] <footer> ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show information about DHCP

relay

DHCP Relay

statistics

Statistics related to DHCP

interface

(Optional) input interface

intf

(Optional) interface

serverip

(Optional) Helper address

ip-addr-val

(Optional) IP address

use-vrf

(Optional) helper address VRF membership

vrf-name

(Optional) VRF name

__readonly__

(Optional) Read only

msg_stats_hdr

(Optional) dhcp message statistics header

msg_type_str

(Optional) dhcp message type

rx_pkts

(Optional) received dhcp packets

tx_pkts

(Optional) forwarded dhcp packets

drops

(Optional) dhcp packet drops

msg_type_str_offer

(Optional) dhcp message type

offer_rx_pkts

(Optional) received dhcp packets

offer_tx_pkts

(Optional) forwarded dhcp packets

offer_drops

(Optional) dhcp packet drops

msg_type_str_request

(Optional) dhcp message type

request_rx_pkts

(Optional) received dhcp packets

request_tx_pkts

(Optional) forwarded dhcp packets

request_drops

(Optional) dhcp packet drops

msg_type_str_ack

(Optional) dhcp message type

ack_rx_pkts

(Optional) received dhcp packets

ack_tx_pkts

(Optional) forwarded dhcp packets

ack_drops

(Optional) dhcp packet drops

msg_type_str_release

(Optional) dhcp message type

release_rx_pkts

(Optional) received dhcp packets

release_tx_pkts

(Optional) forwarded dhcp packets

release_drops

(Optional) dhcp packet drops

msg_type_str_decline

(Optional) dhcp message type

decline_rx_pkts

(Optional) received dhcp packets

decline_tx_pkts

(Optional) forwarded dhcp packets

decline_drops

(Optional) dhcp packet drops

msg_type_str_inform

(Optional) dhcp message type

inform_rx_pkts

(Optional) received dhcp packets

inform_tx_pkts

(Optional) forwarded dhcp packets

inform_drops

(Optional) dhcp packet drops

msg_type_str_nack

(Optional) dhcp message type

nack_rx_pkts

(Optional) received dhcp packets

nack_tx_pkts

(Optional) forwarded dhcp packets

nack_drops

(Optional) dhcp packet drops

line

(Optional)

msg_type_str_total

(Optional) total dhcp packets of all message types

total_rx_pkts

(Optional) total forwarded dhcp packets

total_tx_pkts

(Optional) total forwarded dhcp packets

total_drops

(Optional) total dhcp drops

line_x

(Optional)

server_consolidated_hdr

(Optional) DHCP server stats

TABLE_server_info

(Optional)

server_helper_addr

(Optional) dhcp server address

server_vrf

(Optional) dhcp server vrf

server_total_request

(Optional) total dhcp requests to server

server_total_response

(Optional) total dhcp responses from server

line_y

(Optional)

l3_fwd_hdr

(Optional) DHCP l3 forward header

l3_fwd_rx_pkts

(Optional) DHCP l3 received packets

l3_fwd_tx_pkts

(Optional) DHCP l3 forwarded packets

l3_fwd_drops

(Optional) DHCP l3 forward drops

non_dhcp_hdr

(Optional) non dhcp packets header

non_dhcp_rx_pkts

(Optional) total non dhcp packets received

non_dhcp_tx_pkts

(Optional) total non dhcp packets forwarded

non_dhcp_drops

(Optional) total non dhcp drops

drop_hdr

(Optional) total dhcp drops in various scenarios

drop_validation_fail

(Optional) drops due to option 82 validation failed

drop_relay_disable

(Optional) drops due to dhcp relay not enabled

drop_invalid_msg_type

(Optional) drops due to invalid message type

drop_intf_err

(Optional) drops due to interface error

drop_tx_sock_err

(Optional) tx failure towards server

drop_tx_fail_client_intf

(Optional) drops due to Tx failure towards client

drop_unknown_op_intf

(Optional) Unknown output interface

drop_l3_unknown_op_intf

(Optional) unknown vrf interface for server

drop_max_hops

(Optional) drops due to max hop exceeded

drop_opt82_insert_fail

(Optional) Insertion of option 82 failed

drop_malformed

(Optional) drops due to packet malformed

drop_mct_drop

(Optional) drops through mct

drop_untrusted_relay_intf

(Optional) drops due to untrusted relay interface

server_discover

(Optional) DHCP discover messages relayed to server

server_request

(Optional) DHCP request messages relayed to server

server_decline

(Optional) DHCP decline messages relayed to server

server_release

(Optional) DHCP release messages relayed to server

server_inform

(Optional) DHCP inform messages relayed to server

server_ack

(Optional) DHCP ack messages relayed from server

server_nack

(Optional) DHCP nack messages relayed from server

server_offer

(Optional) DHCP offer messages relayed from server

server_resp_hdr

(Optional) DHCP server response header

drop_unknown

(Optional) drops due to Unknown Failure

server_req_hdr

(Optional) DHCP server request header

footer

(Optional) footer line

Command Mode

- /exec

show ip dhcp snooping

show ip dhcp snooping [ __readonly__ <snoop_service_enable> <snoop_gbl_enable> <snoop_vlan_enable> <snoop_oper_vlan_enable> <snoop_opt82_enable> <snoop_hwaddr_verify_enable> <snoop_hdr> [ { TABLE_intf_entry <intf_entry_if_index> <intf_entry_trust_dhcp> <intf_entry_pkt_limit> } ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show items in DHCP

snooping

DHCP snooping

__readonly__

(Optional) Read only

snoop_service_enable

(Optional)

snoop_gbl_enable

(Optional)

snoop_vlan_enable

(Optional)

snoop_oper_vlan_enable

(Optional)

snoop_opt82_enable

(Optional)

snoop_hwaddr_verify_enable

(Optional)

snoop_hdr

(Optional)

TABLE_intf_entry

(Optional)

intf_entry_if_index

(Optional)

intf_entry_trust_dhcp

(Optional) is DHCP snooping trusted on the interface

intf_entry_pkt_limit

(Optional) limit for DHCP packets per second on the interface

Command Mode

- /exec

show ip dhcp snooping binding

show ip dhcp snooping binding [ <ip> | <mac> | vlan <vlan-range> |

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show items in DHCP

snooping

DHCP snooping

binding

DHCP snooping bindings

ip

(Optional) Binding entry IP address

mac

(Optional) Binding entry MAC address

vlan

(Optional) Binding entry VLAN

vlan-range

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec

show ip dhcp snooping statistics

show ip dhcp snooping statistics [ { vlan <vlan-id> interface <intf> } |

Syntax Description

vlan-id

(Optional) ]

show

Show running system information

ip

Show the IP features of the system

dhcp

Show information about DHCP

snooping

DHCP snooping

statistics

Statistics related to DHCP

vlan

(Optional) VLAN

interface

(Optional) input interface

intf

(Optional) interface

Command Mode

- /exec

show ip dhcp status

show ip dhcp status [ __readonly__ [ <current_cli_op> ] [ <last_cli_op> <last_cli_stat> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show information about DHCP

status

Current CLI command and execution status of the last command

__readonly__

(Optional) Read only

current_cli_op

(Optional) current cli operation

last_cli_op

(Optional) last cli operation

last_cli_stat

(Optional) last cli status

Command Mode

- /exec

show ip dns source-interface

show ip dns source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_ipdnsvrf <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

dns

Display domain-lookup information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ipdnsvrf

(Optional) source interface of dns given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip dns source-interface vrf all

show ip dns source-interface vrf all [ __readonly__ [ { TABLE_ipdns <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

dns

Display domain-lookup information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_ipdns

(Optional) source interface of dns

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip eigrp

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> <router_id> TABLE_vrf <vrf> <state> <authen_md5> <authen_keychain> <metric_weight_k1> <metric_weight_k2> <metric_weight_k3> <metric_weight_k4> <metric_weight_k5> [ <metric_weight_k6> <metric_ribscale> ] <metric_version> <eigrp_proto> { <multicast_group> | <multicast_groupv6> } <int_distance> <ext_distance> <max_paths> <num_interfaces> <num_lo_interfaces> <num_pass_interfaces> <num_peers> [ { TABLE_redist <redist_srcproto> <redist_routemap> } ] <graceful_restart> <stub_configured> [ <stub_option_connected> <stub_option_summary> <stub_option_redist> <stub_option_leak_map> <stub_option_receive_only> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

detail

(Optional) Show detailed EIGRP process stats

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

__readonly__

(Optional)

TABLE_asn

(Optional) AS Number table

asn

(Optional) AS number

router_id

(Optional) Router-ID

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

state

(Optional) EIGRP Process Status

authen_md5

(Optional) Authentication Mode

authen_keychain

(Optional) Authentication Key-Chain

metric_weight_k1

(Optional) DUAL metric k1

metric_weight_k2

(Optional) DUAL metric k2

metric_weight_k3

(Optional) DUAL metric k3

metric_weight_k4

(Optional) DUAL metric k4

metric_weight_k5

(Optional) DUAL metric k5

metric_weight_k6

(Optional) DUAL metric k6

metric_ribscale

(Optional) RIB Scale

metric_version

(Optional) Metric version

eigrp_proto

(Optional) IP Protocol number

multicast_group

(Optional) Multicast Group Address

int_distance

(Optional) Internal Administrative Distance

ext_distance

(Optional) External Administrative Distance

max_paths

(Optional) Maximum paths allowed for a dndb

num_interfaces

(Optional) Number of EIGRP interfaces configured under this AS

num_lo_interfaces

(Optional) Number of EIGRP loopback interfaces configured under this AS

num_pass_interfaces

(Optional) Number of EIGRP Passive interfaces configured under this AS

num_peers

(Optional) Number of EIGRP peers

TABLE_redist

(Optional) Redistribution Table

redist_srcproto

(Optional) Source protocol of the redistributed route

redist_routemap

(Optional) Route-map used in this redistribution

graceful_restart

(Optional) Graceful restart configured?

stub_configured

(Optional) Stub-Routing configured?

stub_option_connected

(Optional) Advertise connected routes?

stub_option_summary

(Optional) Advertise summary routes?

stub_option_redist

(Optional) Advertise redistributed routes?

stub_option_leak_map

(Optional) Allow routes permitted by leak-map?

stub_option_receive_only

(Optional) Configured as receive only?

Command Mode

- /exec

show ip eigrp accounting

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] accounting [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> <router_id> TABLE_vrf <vrf> <total_prefix> <redist_state> <redist_count> <restart_count> <acct_timer> [ TABLE_peer { <p_ipaddr> | <p_ipv6addr> } <p_state> <p_ifname> <p_prefix_count> <p_restart_count> <p_acct_timer> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

accounting

IP-EIGRP Accounting

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

router_id

(Optional) Router-ID

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

total_prefix

(Optional) Total prefix count (Aggregate)

redist_state

(Optional) State of redistributed prefixes

redist_count

(Optional) Number of redistributed prefixes

restart_count

(Optional) Number of times the prefix was suspended

acct_timer

(Optional) Accounting timer

TABLE_peer

(Optional) Peer (Prefix) table

p_ipaddr

(Optional) Peer IP addr

p_state

(Optional) Peer state

p_ifname

(Optional) Peering interface

p_prefix_count

(Optional) Number of Prefixes learnt from the peer

p_restart_count

(Optional) Number of times the prefix was suspended

p_acct_timer

(Optional) Peer accounting timer

Command Mode

- /exec

show ip eigrp event-history

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] [ internal ] event-history { fsm | packet | rib }

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Event History of EIGRP

fsm

FSM log of EIGRP

packet

Packet log of EIGRP

rib

RIB log of EIGRP

Command Mode

- /exec

show ip eigrp event-history bfd

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] [ internal ] event-history bfd

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Event History of EIGRP

bfd

Show bfd log of EIGRP

Command Mode

- /exec

show ip eigrp event

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] event [ <start-num> <end-num> ] [ type ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

event

IP-EIGRP Events

start-num

(Optional) Starting event number

end-num

(Optional) Ending event number

type

(Optional) Show Events being logged

Command Mode

- /exec

show ip eigrp interfaces

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] interfaces [ detail ] [ <interface> ] [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> [ TABLE_if <ifname> <peer_count> <xmitq_unrel> <xmitq_rel> <mean_srtt> <send_intvl_unrel> <send_intvl_rel> <mcast_flow_delay> <pending_routes> [ <hello_intvl> <holdtime_intvl> <next_xmit_serno> <packetize_pending> <mcasts_sent_unrel> <mcasts_sent_rel> <ucasts_sent_unrel> <ucasts_sent_rel> <mcast_exceptions> <cr_packets> <acks_suppressed> <retrans_sent> <out_of_seq_rcvd> <stub_interface> <nexthop_self> <auth_mode_md5> <auth_key_chain> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

interfaces

IP-EIGRP interfaces

detail

(Optional) Show detailed interface information

interface

(Optional) Interface

brief

(Optional) Show summary information only

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_if

(Optional) Interface table

ifname

(Optional) Interface name

peer_count

(Optional) Number of Peer on this interface

xmitq_unrel

(Optional) Xmit Q (unreliable) count

xmitq_rel

(Optional) Xmit Q (reliable) count

mean_srtt

(Optional) Mean of all peer SRTTs

send_intvl_unrel

(Optional) Base packet gap, per queue (unreliable)

send_intvl_rel

(Optional) Base packet gap, per queue (reliable)

mcast_flow_delay

(Optional) Last delay for Multicast flow control timer

pending_routes

(Optional) Pending routes on the interface

hello_intvl

(Optional) Configured hello interval for interface

holdtime_intvl

(Optional) Configured holdtime interval for interface

next_xmit_serno

(Optional) Next xmit serial number

packetize_pending

(Optional) Packetization pending?

mcasts_sent_unrel

(Optional) Number of Multicasts sent (unreliable)

mcasts_sent_rel

(Optional) Number of Multicasts sent (reliable)

ucasts_sent_unrel

(Optional) Number of Unicasts sent (unreliable)

ucasts_sent_rel

(Optional) Number of Unicasts sent (reliable)

mcast_exceptions

(Optional) Multicast exceptions (Count of multicasts sent as unicasts)

cr_packets

(Optional) Count of Multicasts sent with CR

acks_suppressed

(Optional) Count of suppressed ACK packets

retrans_sent

(Optional) Count of Retransmissions sent

out_of_seq_rcvd

(Optional) Count of packets received Out-of-Sequence

stub_interface

(Optional) All Peers are stubbed?

nexthop_self

(Optional) should retain next-hop?

auth_mode_md5

(Optional) MD5 Authentication enabled?

auth_key_chain

(Optional) Authentication key-chain

Command Mode

- /exec

show ip eigrp metric

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] metric <bw> <delay> [ <rel> ] [ <load> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

metric

Compute composite metric from vector metric

bw

Bandwidth in Kbits per second

delay

Delay metric

rel

(Optional) Reliability metric where 255 is 100% reliable

load

(Optional) Effective bandwidth metric (Loading) where 255 is 100% loaded

Command Mode

- /exec

show ip eigrp neighbors

show { { ip eigrp [ <eigrp-ptag> ] neighbors [ detail | state ] { [ <interface> ] | { [ <address> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } } | { ipv6 eigrp [ <eigrp-ptag> ] neighbors [ detail | state ] { [ <interface> ] | { [ <ipv6-addr> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } } } [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> [ { TABLE_peer <peer_handle> { <peer_ipaddr> | <peer_ipv6addr> } <peer_ifname> <peer_holdtime> <peer_srtt> <peer_rto> <peer_xmitq_count> <peer_last_seqno> <peer_uptime> [ <peer_static> <peer_nsf_restart_time> <peer_last_startup_serno> <peer_ios_major_ver> <peer_ios_minor_ver> <peer_eigrp_major_rev> <peer_eigrp_minor_rev> <peer_retrans_count> <peer_retry_count> <peer_wait_for_init> <peer_wait_for_init_ack> <peer_reinit_start_time> <peer_prefix_count> <peer_info_stubbed> <peer_info_receive_only> [ <peer_info_allow_connected> <peer_info_allow_statics> <peer_info_allow_summaries> <peer_info_allow_redist> <peer_info_allow_leaking> ] [ <peer_state_cr_mode> <peer_state_need_init> <peer_state_need_init_ack> <peer_state_going_down> <peer_state_coming_up> <peer_state_peer_deleted> <peer_state_nsf_in_progress> <peer_state_need_eot> <peer_state_use_nsf_startup_mode> <peer_state_await_nsf_convergence> <peer_state_initiated_gr> <peer_state_cr_sequence> <peer_state_rcv_probe_sequence> <peer_state_send_probe_sequence> ] <peer_suppress_queries> ] [ TABLE_xmitq_pkts <pkt_qtype> <pkt_counter> <pkt_opcode> <pkt_ack_seqno> <pkt_start_seqno> <pkt_end_seqno> <pkt_len> <pkt_time_sent> <pkt_init_flag> <pkt_sequenced> ] } ] [ { TABLE_suspended_peer { <susp_peer_ipaddr> | <susp_peer_ipv6addr> } <susp_peer_ifname> <susp_peer_restart_reqd> <susp_peer_restart_time> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

neighbors

IP-EIGRP neighbors

detail

(Optional) Show detailed peer information

state

(Optional) Show detailed peer and state information

interface

(Optional) Interface

address

(Optional) IP-EIGRP neighbor address

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_peer

(Optional) Peer table

peer_handle

(Optional) Peer handle

peer_ipaddr

(Optional) Peer's IP addr

peer_ifname

(Optional) Peering Interface name

peer_holdtime

(Optional) Hold-time for the peer

peer_uptime

(Optional) Peer Up-time

peer_srtt

(Optional) SRTT

peer_rto

(Optional) RTO

peer_xmitq_count

(Optional) Xmit Q count

peer_last_seqno

(Optional) Last received Sequence number

peer_static

(Optional) Static peer?

peer_nsf_restart_time

(Optional) Timestamp of last nsf restart

peer_last_startup_serno

(Optional) Target serial number for unicast startup

peer_ios_major_ver

(Optional) IOS major version

peer_ios_minor_ver

(Optional) IOS minor version

peer_eigrp_major_rev

(Optional) EIGRP major revision

peer_eigrp_minor_rev

(Optional) EIGRP minor revision

peer_retrans_count

(Optional) Number of retransmissions to this peer

peer_retry_count

(Optional) Retries for packets on xmit Q

peer_wait_for_init

(Optional) Waiting for INIT

peer_wait_for_init_ack

(Optional) Waiting for INIT-ACK

peer_reinit_start_time

(Optional) Re-Init start time

peer_prefix_count

(Optional) Number of Prefixes received from the peer

peer_info_stubbed

(Optional) Peer is a Stub?

peer_info_receive_only

(Optional) Peer is receive-only?

peer_info_allow_connected

(Optional) Peer advertises connected routes?

peer_info_allow_statics

(Optional) Peer advertises static routes?

peer_info_allow_summaries

(Optional) Peer advertises summary routes?

peer_info_allow_redist

(Optional) Peer advertises redistributed routes?

peer_info_allow_leaking

(Optional) Peer advertises routes permitted by leak-map?

peer_state_cr_mode

(Optional) Conditional Received mode set?

peer_state_need_init

(Optional) Waiting for Init from peer?

peer_state_need_init_ack

(Optional) Waiting for InitAck from peer?

peer_state_going_down

(Optional) Peer-Going-down?

peer_state_coming_up

(Optional) Peer-Coming-up?

peer_state_peer_deleted

(Optional) Peer-Deleted?

peer_state_nsf_in_progress

(Optional) Peer is nsf restarting?

peer_state_need_eot

(Optional) Expect end-of-table from this peer?

peer_state_use_nsf_startup_mode

(Optional) Use nsf startup method?

peer_state_await_nsf_convergence

(Optional) The peer is waiting eot from us?

peer_state_initiated_gr

(Optional) Initiated graceful restart?

peer_state_cr_sequence

(Optional) Expected sequence number of CR packet

peer_state_rcv_probe_sequence

(Optional) Sequence number of last probe packet received

peer_state_send_probe_sequence

(Optional) Sequence number of next probe to send

peer_suppress_queries

(Optional) Supress queries to this peer?

TABLE_xmitq_pkts

(Optional) Xmit Q packtes table

pkt_qtype

(Optional) XMIT Qtype

pkt_counter

(Optional) Packet counter for the packets present in the transmit queue

pkt_opcode

(Optional) Packet opcode

pkt_ack_seqno

(Optional) Ack/Sequence number of this packet

pkt_start_seqno

(Optional) Starting serial number

pkt_end_seqno

(Optional) Ending serial number

pkt_len

(Optional) Packet length

pkt_time_sent

(Optional) Time at which the packet is transmitted

pkt_init_flag

(Optional) Init-flag should be sent in the packet?

pkt_sequenced

(Optional) Packet is sequenced?

TABLE_suspended_peer

(Optional) Suspended peer table

susp_peer_ipaddr

(Optional) IP address of suspended peer

susp_peer_ifname

(Optional) Inteface through which we are connected to the suspended peer

susp_peer_restart_reqd

(Optional) Suspended peer restart required?

susp_peer_restart_time

(Optional) Suspended peer restart time

eigrp-ptag

(Optional)

Command Mode

- /exec

show ip eigrp route-map statistics

show ip eigrp [ <eigrp-ptag> ] route-map statistics { { redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt | lisp } } | table-map } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> { TABLE_rmap <name> <action> <seq_num> [ { TABLE_cmd <command> <compare_count> <match_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

show

Show running system information

ip

Display IP information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

route-map

Route-map related information

statistics

Route-map statistics

redistribute

Redistribute information from another routing protocol

table-map

Tablemap information

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT Anycast prefix

lisp

LISP EID-prefixes

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_rmap

(Optional) Routemap table

name

(Optional) Route-map Name

action

(Optional) Route-map action

seq_num

(Optional) Sequence number of the rule in route-map

TABLE_cmd

(Optional) Route-map command table

command

(Optional) Route-map command

compare_count

(Optional) Number of comparisons

match_count

(Optional) Number of matches

total_accept_count

(Optional) Total number of packets accepted by the policy

total_reject_count

(Optional) Total number of pakcets rejected by the policy

Command Mode

- /exec

show ip eigrp sia-event

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] sia-event [ <start-num> <end-num> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

sia-event

IP-EIGRP SIA event

start-num

(Optional) Starting event number

end-num

(Optional) Ending event number

Command Mode

- /exec

show ip eigrp sia-statistics

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] sia-statistics [ <peer> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

sia-statistics

IP-EIGRP SIA Statistics

peer

(Optional) Peer ID to display information about

Command Mode

- /exec

show ip eigrp timers

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] timers [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

timers

IP-EIGRP Timers

Command Mode

- /exec

show ip eigrp traffic

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] traffic [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> <hellos_sent> <hellos_rcvd> <updates_sent> <updates_rcvd> <queries_sent> <queries_rcvd> <replies_sent> <replies_rcvd> <acks_sent> <acks_rcvd> <max_inqueue_depth> <inqueue_drops> <sia_queries_sent> <sia_queries_rcvd> <sia_replies_sent> <sia_replies_rcvd> ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

traffic

IP-EIGRP Traffic Statistics

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

hellos_sent

(Optional) Number of Hellos sent

hellos_rcvd

(Optional) Number of Hellos received

updates_sent

(Optional) Number of Updates sent

updates_rcvd

(Optional) Number of Updates received

queries_sent

(Optional) Number of Queries sent

queries_rcvd

(Optional) Number of Queries received

replies_sent

(Optional) Number of Replies sent

replies_rcvd

(Optional) Number of Replies received

acks_sent

(Optional) Number of ACKs sent

acks_rcvd

(Optional) Number of ACKs received

max_inqueue_depth

(Optional) Input queue high water mark

inqueue_drops

(Optional) Input queue drops

sia_queries_sent

(Optional) Number of SIA queries sent

sia_queries_rcvd

(Optional) Number of SIA queries received

sia_replies_sent

(Optional) Number of SIA replies sent

sia_replies_rcvd

(Optional) Number of SIA replies received

Command Mode

- /exec

show ip extcommunity-list

show ip extcommunity-list [ <extcl_name> ] [ __readonly__ TABLE_extcl <name> <action> <rule> ]

Syntax Description

show

Show running system information

ip

Display IP information

extcommunity-list

List extcommunity-list

extcl_name

(Optional) Standard or expanded community-list name

__readonly__

(Optional)

TABLE_extcl

(Optional)

name

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ip fib adjacency

show ip fib adjacency [ <aif> ] [ <anh> ] [ module <module> ] [ __readonly__ <adj-count> <nexthop> <rewinfo> <interface> ]

Syntax Description

show

ip

Display IP information

fib

Forwarding information

adjacency

display adjacency information

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next hop

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

adj-count

(Optional) total adj count

nexthop

(Optional) next hop address

rewinfo

(Optional) rewrite information

interface

(Optional) output interface

Command Mode

- /exec

show ip fib distribution

show ip fib distribution [ pauz | rezum ]

Syntax Description

show

ip

ipv4

fib

forwarding information

distribution

fib distribution information

pauz

(Optional) start black-holing routes

rezum

(Optional) stop black-holing routes

Command Mode

- /exec

show ip fib distribution capture

show ip fib distribution capture [ __readonly__ <type><len><data> ]

Syntax Description

show

ip

ipv4

fib

forwarding information

distribution

fib distribution info

capture

unicast capture buffer

__readonly__

(Optional)

Command Mode

- /exec

show ip fib distribution clients

show ip fib distribution clients [ __readonly__ <id><pid><name><shms><shme><shmn> ]

Syntax Description

show

ip

ipv4

fib

forwarding information

distribution

fib distribution info

clients

unicast client information

__readonly__

(Optional)

Command Mode

- /exec

show ip fib distribution mroute

show ip fib distribution mroute [ { <group> | <gprefix> } [ <source> ] ] [ table <id> ] [ __readonly__ <table_name> <src_len> <grp_len> <df_ordinal> <rpfif> <rpf_ifname> <flag> <flag_value> <num_groups> <num_sources> <refcount> <oiflist_id> <oif_count> <oif_name> <oif_ifindex> <bytecnt> <pktcnt> ]

Syntax Description

show

ip

IP information

fib

Forwarding Information

distribution

FIB distribution information

mroute

MFDM IP multicast routing table

group

(Optional) IPv4 Multicast Group Address

gprefix

(Optional) IPv4 Multicast Group Prefix

source

(Optional) IPv4 Source Address

table

(Optional) Specify Multicast Routing Table

id

(Optional) Multicast Routing Table Identifier

__readonly__

(Optional)

table_name

(Optional) Table name

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

rpf_ifname

(Optional) RPF Interface ifName

flag

(Optional) Route type flag

flag_value

(Optional) hex value of route flag

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

refcount

(Optional) Reference Count

oiflist_id

(Optional) OIF list Identifier

oif_count

(Optional) Number of OIFs

oif_name

(Optional) OIF Name

oif_ifindex

(Optional) OIF ifIndex

bytecnt

(Optional) Current Byte counter

pktcnt

(Optional) Current Packet counter

Command Mode

- /exec

show ip fib distribution multicast

show ip fib distribution multicast [ messages ] [ __readonly__ <fibstate> <slot> <accepting_routes> <num_accepting_routes> ]

Syntax Description

show

ip

IP information

fib

Forwarding Information

distribution

FIB distribution information

multicast

Multicast FIB distribution information

messages

(Optional) Outstanding Message Information

__readonly__

(Optional)

fibstate

(Optional) IP Multicast FIB process state

slot

(Optional) Slot

accepting_routes

(Optional) Indicates whether FIB is accepting routes

num_accepting_routes

(Optional) Number of fibs accepting routes

Command Mode

- /exec

show ip fib distribution multicast outgoing-interface-list

show ip fib distribution multicast outgoing-interface-list { L2 | L3 | OTV } [ <index> ] [ __readonly__ <platform_index> <ref_count> <num_oif> <oif> ]

Syntax Description

show

ip

IP information

fib

Forwarding Information

distribution

FIB distribution information

multicast

Multicast FIB distribution information

outgoing-interface-list

Outgoing interface list

L2

Layer 2 oiflist

L3

Layer 3 oiflist

OTV

OTV oiflist

index

(Optional) Outgoing Interface List index

__readonly__

(Optional)

platform_index

(Optional) Platform index

ref_count

(Optional) Reference count

num_oif

(Optional) Number of outgoing interfaces

oif

(Optional) OIF name

Command Mode

- /exec

show ip fib distribution state

show ip fib distribution state [ __readonly__ <slot><known><ar><rcnt><state> ]

Syntax Description

show

ip

ipv4

fib

forwarding information

distribution

fib distribution info

state

unicast fib state info

__readonly__

(Optional)

Command Mode

- /exec

show ip fib interfaces

show ip fib interfaces [ module <module> ] [ __readonly__ <intf> <v4adjcnt> <v6adjcnt> <rpfmode> ]

Syntax Description

show

ip

Display IP information

fib

Forwarding information

interfaces

show fib interface info

__readonly__

(Optional)

intf

(Optional) interface name

module

(Optional) slot

module

(Optional) slot number

v4adjcnt

(Optional) count of v4 adjacencies

v6adjcnt

(Optional) count of v6 adjacencies

rpfmode

(Optional) uRPF mode

Command Mode

- /exec

show ip fib mroute

show ip fib mroute [ { <group> | <gprefix> } [ <source> ] ] [ table <table-id> ] [ module <module> ] [ __readonly__ <table_type> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <rpf_ifindex> <flag> <flag_value> <route_pkts> <route_bytes> <oiflist_id> <platform_id> <oif_count> <refcount> <oifname> <oifindex> <oif_pkts> <oif_bytes> ]

Syntax Description

show

ip

Display IP information

fib

Forwarding information

mroute

Multicast IPv4 routes

group

(Optional) Multicast IPv4 Group Address

gprefix

(Optional) Multicast IPv4 Group Prefix

source

(Optional) Multicast IPv4 Source Address

table

(Optional) display info per vpn-id

table-id

(Optional) table-id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

rpf_ifindex

(Optional) RPF Interface ifIndex

flag

(Optional) Route type flag

flag_value

(Optional) hex value of route flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

oiflist_id

(Optional) OIF list Identifier

platform_id

(Optional) Platform-index

oif_count

(Optional) Number of OIFs

refcount

(Optional) OIF list Reference Count

oifname

(Optional) OIF Interface name

oifindex

(Optional) OIF Interface ifIndex

oif_pkts

(Optional) OIF packets

oif_bytes

(Optional) OIF bytes

Command Mode

- /exec

show ip fib mroute

show ip fib mroute [ { <group> | <gprefix> } [ <source> ] ] [ table <table-id> ] [ module <module> ] [ __readonly__ <table_type> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <rpf_ifindex> <flag> <flag_value> <route_pkts> <route_bytes> <oiflist_id> <platform_id> <oif_count> <refcount> <oifname> <oifindex> <oif_pkts> <oif_bytes> ]

Syntax Description

show

ip

Display IP information

fib

Forwarding information

mroute

Multicast IPv4 routes

group

(Optional) Multicast IPv4 Group Address

gprefix

(Optional) Multicast IPv4 Group Prefix

source

(Optional) Multicast IPv4 Source Address

table

(Optional) display info per vpn-id

table-id

(Optional) table-id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

rpf_ifindex

(Optional) RPF Interface ifIndex

flag

(Optional) Route type flag

flag_value

(Optional) hex value of route flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

oiflist_id

(Optional) OIF list Identifier

platform_id

(Optional) Platform-index

oif_count

(Optional) Number of OIFs

refcount

(Optional) OIF list Reference Count

oifname

(Optional) OIF Interface name

oifindex

(Optional) OIF Interface ifIndex

oif_pkts

(Optional) OIF packets

oif_bytes

(Optional) OIF bytes

Command Mode

- /exec

show ip fib mroute txlist

show ip fib mroute txlist [ module <module> ]

Syntax Description

show

ip

Display IP information

fib

Forwarding information

mroute

display IP mcast routing table

txlist

display routes in the txlist

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show ip fib route

show ip fib route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ summary | <prefix> [ longer-prefixes ] | <address> | interface <interface> | next-hop <nh> | attached | unresolved | adjacency { <aif> <anh> | drop | glean | punt } ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ <header> <vrfname> <tableid> <prefix-count> <pfx> { <nexthop> | <special> } <intf> <route-count> <path-count> <mask-length> <routes-per-mask> ]

Syntax Description

show

ip

Display IP information

fib

Forwarding information

route

display IP routing table

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

summary

(Optional) display route counts

prefix

(Optional) display single exact match route

longer-prefixes

(Optional) display longer prefixes

address

(Optional) display single longest match route

interface

(Optional) display routes with this output i/f only

interface

(Optional) output interface

next-hop

(Optional) display routes with this next-hop only

nh

(Optional) next hop address

attached

(Optional) display directly connected routes

unresolved

(Optional) display unresolved routes

adjacency

(Optional) display routes via specified adjacency

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next-hop address

drop

(Optional) display routes via drop adjacency

glean

(Optional) display routes via glean adjacency

punt

(Optional) display routes via punt adjacency

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

header

(Optional) header string

vrfname

(Optional) VRF name

tableid

(Optional) table identifier

prefix-count

(Optional) total number of prefix in VRF

pfx

(Optional) ipv4 prefix

nexthop

(Optional) next hop address

special

(Optional) special adjacencies

intf

(Optional) output interface

route-count

(Optional) total number of routes in VRF

path-count

(Optional) total number of paths in VRF

mask-length

(Optional) length of mask

routes-per-mask

(Optional)

Command Mode

- /exec

show ip fib route

show ip fib route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ summary | <prefix> [ longer-prefixes ] | <address> | interface <interface> | next-hop <nh> | attached | unresolved | adjacency { <aif> <anh> | drop | glean | punt } ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ [ <header> <vrfname> <tableid> <prefix-count> <pfx> { <nexthop> | <special> } <intf> <route-count> <path-count> <mask-length> <routes-per-mask> ] [ TABLE_vrf { [ <vrf_name_out> ] [ <table_name> ] [ TABLE_prefix { [ <pfx> ] [ TABLE_path { [ <nexthop> | <special> ] [ <intf> ] } ] } ] } ] ]

Syntax Description

show

ip

Display IP information

fib

Forwarding information

route

display IP routing table

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

summary

(Optional) display route counts

prefix

(Optional) display single exact match route

longer-prefixes

(Optional) display longer prefixes

address

(Optional) display single longest match route

interface

(Optional) display routes with this output i/f only

interface

(Optional) output interface

next-hop

(Optional) display routes with this next-hop only

nh

(Optional) next hop address

attached

(Optional) display directly connected routes

unresolved

(Optional) display unresolved routes

adjacency

(Optional) display routes via specified adjacency

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next-hop address

drop

(Optional) display routes via drop adjacency

glean

(Optional) display routes via glean adjacency

punt

(Optional) display routes via punt adjacency

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

header

(Optional) header string

vrfname

(Optional) VRF name

tableid

(Optional) table identifier

prefix-count

(Optional) total number of prefix in VRF

pfx

(Optional) ipv4 prefix

nexthop

(Optional) next hop address

special

(Optional) special adjacencies

intf

(Optional) output interface

route-count

(Optional) total number of routes in VRF

path-count

(Optional) total number of paths in VRF

mask-length

(Optional) length of mask

routes-per-mask

(Optional)

TABLE_vrf

(Optional) vrf table

vrf_name_out

(Optional) VRF name

table_name

(Optional) table name

TABLE_prefix

(Optional) all xml prefix entries

pfx

(Optional) ipv4 prefix

TABLE_path

(Optional) path table

nexthop

(Optional) next hop address

special

(Optional) special adjacencies

intf

(Optional) output interface

Command Mode

- /exec

show ip fib route recovered

show ip fib route recovered

Syntax Description

show

ip

ipv4

fib

display fib information

route

display IP routing table

recovered

log of routes recovered after TCAM free condition

Command Mode

- /exec

show ip ftm statistics

show ip ftm statistics

Syntax Description

show

Show running system information

ip

Display IP information

ftm

FTM API

statistics

Statistics

Command Mode

- /exec

show ip ftp source-interface

show ip ftp source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_ipftpvrf <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ftp

Display FTP client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ipftpvrf

(Optional) source interface of ftp given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip ftp source-interface vrf all

show ip ftp source-interface vrf all [ __readonly__ [ { TABLE_ipftp <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ftp

Display FTP client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_ipftp

(Optional) source interface of ftp

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip http source-interface

show ip http source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_iphttpvrf <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

http

Display HTTP client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_iphttpvrf

(Optional) source interface of http given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip http source-interface vrf all

show ip http source-interface vrf all [ __readonly__ [ { TABLE_iphttp <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

http

Display HTTP client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_iphttp

(Optional) source interface of http

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip igmp event-history

show ip igmp [ internal ] event-history { errors | msgs | <igmp-event-hist-buf-name> | statistics }

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

(Optional) Commands for internal use

event-history

Show various event logs of IGMP

errors

Show error logs of IGMP

msgs

Show various message logs of IGMP

igmp-event-hist-buf-name

Show various logs of IGMP

statistics

Show state and size of buffer

Command Mode

- /exec

show ip igmp groups

show ip igmp { groups | route } [ <source> [ <group> ] | <group> [ <source> ] ] [ <interface> ] [ summary ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ summary-old ] [ __readonly__ [ TABLE_vrf [ <if-name> ] [ <vrfname> ] [ <entry-count> ] [ <group-addr> ] [ <sourceaddress> ] [ TABLE_group [ <group-addr> ] [ <group-type> ] [ <if-name> ] [ <uptime> ] [ <expires> ] [ <reporter> ] ] [ TABLE_source [ <source-addr> ] [ <group-type> ] [ <translate> ] [ <if-name> ] [ <uptime> ] [ <expires> ] [ <reporter> ] ] [ <vrf-cntxt> ] [ <g-count> ] [ <sg-count> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

groups

Display IGMP attached group membership information

route

Display IGMP attached group membership information

group

(Optional) Multicast IP address of single group to display

source

(Optional) Source IP address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

(Optional) Display group membership on single interface name

summary

(Optional) Display group summary

summary-old

(Optional) Display group summary

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrfname

(Optional)

if-name

(Optional)

group-addr

(Optional)

entry-count

(Optional)

sourceaddress

(Optional)

TABLE_group

(Optional)

group-addr

(Optional)

group-type

(Optional)

if-name

(Optional)

uptime

(Optional)

expires

(Optional)

reporter

(Optional)

TABLE_source

(Optional)

source-addr

(Optional)

group-type

(Optional)

translate

(Optional)

if-name

(Optional)

uptime

(Optional)

expires

(Optional)

reporter

(Optional)

vrf-cntxt

(Optional)

g-count

(Optional)

sg-count

(Optional)

Command Mode

- /exec

show ip igmp interface

show ip igmp interface [ <interface> ] [ brief ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf> [ <entry-count> ] [ [ TABLE_brief [ <if-name> ] [ <addr> ] [ <querier> ] [ <mc> ] [ <ver> ] ] [ TABLE_if <if-name> [ <if-status> ] [ <ip-sum> ] [ <addr> ] [ <querier> ] [ <q-ver> ] [ <next-query> ] [ <expires> ] [ <mc> ] [ <ver> ] [ <host-ver> ] [ <qi> ] [ <cqi> ] [ <mrt> ] [ <cmrt> ] [ <sqi> ] [ <csqi> ] [ <sqc> ] [ <lmmrt> ] [ <lmqc> ] [ <gt> ] [ <cgt> ] [ <qt> ] [ <cqt> ] [ <uri> ] [ <rv> ] [ <crv> ] [ <rll> ] [ <rc> ] [ <il> ] [ <join-group-map> ] [ <static-group-map> ] [ <host-proxy> ] [ <host-proxy-group-map> ] [ <un-solicited> ] [ <unsoint> ] [ <v1rr> ] [ <v2qs> ] [ <v2qr> ] [ <v2rs> ] [ <v2rr> ] [ <v2ls> ] [ <v2lr> ] [ <v3qs> ] [ <v3qr> ] [ <v3rs> ] [ <v3rr> ] [ <v2gqdest> ] [ <v3gqdest> ] [ <cse> ] [ <ple> ] [ <lsip> ] [ <scf> ] [ <qnq> ] [ <rvm> ] [ <qvm> ] [ <uit> ] [ <v1gdam> ] [ <v2gdam> ] [ <v3dai> ] [ <ra> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

interface

Display IGMP interface related information

interface

(Optional) Interface name of single interface to display

brief

(Optional) Display one line status per interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

entry-count

(Optional)

TABLE_brief

(Optional)

if-name

(Optional)

addr

(Optional)

querier

(Optional)

mc

(Optional)

ver

(Optional)

TABLE_if

(Optional)

if-name

(Optional)

if-status

(Optional)

ip-sum

(Optional)

addr

(Optional)

querier

(Optional)

q-ver

(Optional)

next-query

(Optional)

expires

(Optional)

mc

(Optional)

ver

(Optional)

host-ver

(Optional)

qi

(Optional)

cqi

(Optional)

mrt

(Optional)

cmrt

(Optional)

sqi

(Optional)

csqi

(Optional)

sqc

(Optional)

lmmrt

(Optional)

lmqc

(Optional)

gt

(Optional)

cgt

(Optional)

qt

(Optional)

cqt

(Optional)

uri

(Optional)

rv

(Optional)

crv

(Optional)

rll

(Optional)

rc

(Optional)

v1rr

(Optional)

v2qs

(Optional)

v2qr

(Optional)

v2rs

(Optional)

v2rr

(Optional)

v2ls

(Optional)

v2lr

(Optional)

v3qs

(Optional)

v3qr

(Optional)

v3rs

(Optional)

v3rr

(Optional)

v2gqdest

(Optional)

v3gqdest

(Optional)

cse

(Optional)

ple

(Optional)

lsip

(Optional)

scf

(Optional)

qnq

(Optional)

rvm

(Optional)

qvm

(Optional)

uit

(Optional)

v1gdam

(Optional)

v2gdam

(Optional)

v3dai

(Optional)

ra

(Optional)

static-group-map

(Optional)

join-group-map

(Optional)

host-proxy-group-map

(Optional)

il

(Optional)

host-proxy

(Optional)

un-solicited

(Optional)

unsoint

(Optional)

Command Mode

- /exec

show ip igmp local-groups

show ip igmp local-groups [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf [ <vrf-name> ] [ TABLE_if [ <if-name> ] [ TABLE_grp [ <group-addr> ] [ TABLE_src [ <source-addr> ] [ <last-reported> ] [ <local-group> ] [ <static-oif> ] [ <report-only> ] [ <host-proxy> ] ] ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

local-groups

Display IGMP local group membership information

interface

(Optional) Display group membership on single interface name

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_if

(Optional)

if-name

(Optional)

TABLE_grp

(Optional)

group-addr

(Optional)

TABLE_src

(Optional)

source-addr

(Optional)

last-reported

(Optional)

local-group

(Optional)

static-oif

(Optional)

report-only

(Optional)

host-proxy

(Optional)

Command Mode

- /exec

show ip igmp policy statistics reports

show ip igmp policy statistics reports [ <interface> ] [ __readonly__ [ TABLE_interface [ <if> ] [ TABLE_routemap [ <name> ] [ <action> ] [ <seq_num> ] [ TABLE_cmd [ <command> ] [ <match_count> ] [ <compare_count> ] ] ] [ <total_accept_count> ] [ <total_reject_count> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Show IGMP related information

policy

Policy related information

statistics

Policy statistics

reports

IGMP reports

interface

(Optional) Interface to display statistics for

__readonly__

(Optional)

TABLE_interface

(Optional)

if

(Optional)

TABLE_routemap

(Optional)

name

(Optional)

action

(Optional)

seq_num

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

compare_count

(Optional)

match_count

(Optional)

total_accept_count

(Optional)

total_reject_count

(Optional)

Command Mode

- /exec

show ip igmp snooping

show ip igmp snooping [ { vlan <vlan> | bridge-domain <bdid> } ] [ __readonly__ [ <vdc> ] [ <enabled> ] [ <omf> ] [ <grepsup> ] [ <gv3repsup> ] [ <glinklocalgrpsup> ] { TABLE_vlan <vlan-id> [ <description> ] [ <snoop-on> ] [ <qa> ] [ <qv> ] [ <qi> ] [ <qlmqi> ] [ <rv> ] [ <sq> ] [ <sqr> ] [ <eht> ] [ <fl> ] [ <repsup> ] [ <v3repsup> ] [ <vlinklocalgrpsup> ] [ <rpc> ] [ <gc> ] [ TABLE_active_ports [ <actvports> ] ] [ <lkupmode> ] [ <omf_enabled> ] [ <reportfloodenable> ] [ <reportfloodall> ] [ TABLE_intf <if-name> ] [ <leavegroupaddress> ] } ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

vlan

(Optional) Display VLAN IGMP snooping membership information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD IGMP snooping membership information

bdid

(Optional) Specify BD

__readonly__

(Optional)

vdc

(Optional)

enabled

(Optional)

omf

(Optional)

grepsup

(Optional)

gv3repsup

(Optional)

glinklocalgrpsup

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

description

(Optional) description, if any

snoop-on

(Optional)

qa

(Optional)

qv

(Optional)

qi

(Optional)

qlmqi

(Optional)

rv

(Optional)

sq

(Optional)

sqr

(Optional)

eht

(Optional)

fl

(Optional)

repsup

(Optional)

v3repsup

(Optional)

vlinklocalgrpsup

(Optional)

rpc

(Optional)

gc

(Optional)

TABLE_active_ports

(Optional)

actvports

(Optional)

lkupmode

(Optional)

omf_enabled

(Optional)

reportfloodenable

(Optional)

reportfloodall

(Optional)

TABLE_intf

(Optional)

if-name

(Optional)

leavegroupaddress

(Optional)

Command Mode

- /exec

show ip igmp snooping event-history

show ip igmp snooping [ internal ] event-history { statistics | <igmp-snoop-event-hist-buf-name> }

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

internal

(Optional) Display IGMP snooping internal information

event-history

Show various event logs of IGMP Snooping

statistics

Show state and size of the buffers

igmp-snoop-event-hist-buf-name

Show contents of event-history buffer

Command Mode

- /exec

show ip igmp snooping explicit-tracking

show ip igmp snooping explicit-tracking [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ __readonly__ [ TABLE_vlan [ <vlan-id> ] [ TABLE_gaddr [ <grp-addr> ] [ TABLE_if [ <if-name> ] [ TABLE_haddr [ <host-addr> ] [ TABLE_srcaddr [ <src-addr> ] [ <uptime> ] [ <last-join> ] [ <expires> ] [ <cfs-flag> ] [ <native-flag> ] [ <delete-pending> ] [ <cfs-update-pending> ] ] ] ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

explicit-tracking

Display explicit-tracking database for IGMPv3

vlan

(Optional) Display Vlan explicit-tracking database

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD explicit-tracking database

bdid

(Optional) Specify BD

detail

(Optional) Display detail info regarding host and vPC

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

TABLE_gaddr

(Optional)

grp-addr

(Optional)

TABLE_if

(Optional)

if-name

(Optional)

TABLE_haddr

(Optional)

host-addr

(Optional)

TABLE_srcaddr

(Optional)

src-addr

(Optional)

uptime

(Optional)

last-join

(Optional)

expires

(Optional)

cfs-flag

(Optional)

native-flag

(Optional)

delete-pending

(Optional)

cfs-update-pending

(Optional)

Command Mode

- /exec

show ip igmp snooping filter details

show ip igmp snooping filter [ vlan <vlan_id> ] details [ __readonly__ { TABLE_vlanid <vlan-id> <access-group> <group-channels-limit> <igmp-min-ver> } ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

filter

Shows filter policy configuration

vlan

(Optional) Only for the specified VLAN

vlan_id

(Optional) VLAN ID

details

Shows different Filter configurations

__readonly__

(Optional)

TABLE_vlanid

(Optional)

vlan-id

(Optional)

access-group

(Optional)

group-channels-limit

(Optional)

igmp-min-ver

(Optional)

Command Mode

- /exec

show ip igmp snooping groups

show ip igmp snooping [ otv | remote ] groups [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ summary ] [ __readonly__ [ TABLE_vlan [ <vlan-id> ] [ <rports> ] [ <rtrPortFlag> ] [ TABLE_port <if-name> ] [ TABLE_rtrports <rport-if-name> ] [ <raddr> ] [ TABLE_source <source> ] [ TABLE_group <addr> [ <g-mfdm> ] [ <ver> ] [ <old-host> ] [ <raddr> ] [ <static> ] [ <dynamic> ] [ TABLE_static_ports <static-if-name> ] [ TABLE_v2_ports <v2-if-name> [ <uptime> ] [ <expires> ] [ <gq-missed> ] ] [ TABLE_star_g_ports <star-g-if-name> [ <uptime> ] [ <expires> ] ] [ <g-vpc> ] [ <rsf> ] [ <js> ] [ TABLE_source <source> [ <srsf> ] [ <s-mfdm> ] [ <src-static> ] [ <src-dynamic> ] [ TABLE_src_static_ports <src-static-if-name> ] [ TABLE_src_dynamic [ <oifs> ] <dyn-if-name> [ <src-uptime> ] [ <src-expires> ] ] [ <s-vpc> ] ] ] [ <snoop-enabled> ] [ <omf-enabled> ] [ <group-count> ] [ <s-g-count> ] [ <total_star_g_count> ] [ <total_sg_count> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

otv

(Optional) IGMP Snooping OTV information

remote

(Optional) IGMP Snooping remote information

groups

Display snooping information for group address

summary

(Optional) Display snooping group summary

group

(Optional) Multicast IP address of single group to display

source

(Optional) Source IP address

vlan

(Optional) Display VLAN IGMP snooping membership information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD IGMP snooping membership information

bdid

(Optional) Specify BD

detail

(Optional) Display detailed information for the group

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

rports

(Optional)

rtrPortFlag

(Optional)

snoop-enabled

(Optional)

omf-enabled

(Optional)

group-count

(Optional)

s-g-count

(Optional)

total_star_g_count

(Optional)

total_sg_count

(Optional)

TABLE_port

(Optional)

if-name

(Optional)

TABLE_rtrports

(Optional)

rport-if-name

(Optional)

raddr

(Optional)

TABLE_group

(Optional)

addr

(Optional)

ver

(Optional)

raddr

(Optional)

TABLE_source

(Optional)

source

(Optional)

rsf

(Optional)

js

(Optional)

g-mfdm

(Optional)

old-host

(Optional)

g-vpc

(Optional)

static

(Optional)

dynamic

(Optional)

TABLE_static_ports

(Optional)

static-if-name

(Optional)

TABLE_v2_ports

(Optional)

v2-if-name

(Optional)

uptime

(Optional)

expires

(Optional)

gq-missed

(Optional)

TABLE_star_g_ports

(Optional)

star-g-if-name

(Optional)

uptime

(Optional)

expires

(Optional)

TABLE_source

(Optional)

source

(Optional)

srsf

(Optional)

s-mfdm

(Optional)

s-vpc

(Optional)

src-static

(Optional)

src-dynamic

(Optional)

TABLE_src_static_ports

(Optional)

src-static-if-name

(Optional)

TABLE_src_dynamic

(Optional)

oifs

(Optional)

dyn-if-name

(Optional)

src-uptime

(Optional)

src-expires

(Optional)

Command Mode

- /exec

show ip igmp snooping lookup-mode

show ip igmp snooping lookup-mode [ vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ [ <configured> ] [ <operational> ] [ TABLE_vlan [ <vlan-id> ] [ <lookup> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

lookup-mode

IGMP Snooping lkup mode information

vlan

(Optional) Display VLAN information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD information

bdid

(Optional) Specify BD

__readonly__

(Optional)

configured

(Optional)

operational

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

lookup

(Optional)

Command Mode

- /exec

show ip igmp snooping mac-oif

show ip igmp snooping mac-oif [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ __readonly__ [ <totaloif> ] [ TABLE_vlan <vlan-id> <count> [ TABLE_mac <mac-addr> [ TABLE_oif <oifs> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

mac-oif

IGMP Snooping static mac oif information

vlan

(Optional) Display VLAN information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD information

bdid

(Optional) Specify BD

detail

(Optional) static mac oif detail, M2RIB oif info

__readonly__

(Optional)

totaloif

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

count

(Optional)

TABLE_mac

(Optional)

mac-addr

(Optional)

TABLE_oif

(Optional)

oifs

(Optional)

Command Mode

- /exec

show ip igmp snooping mrouter

show ip igmp snooping mrouter [ otv ] [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ __readonly__ TABLE_vlan <vlan-id> TABLE_intf <if-name> <static> <dynamic> <vpc> <fabricpath-core-port> <co-learned> <user-configured> <learnt-by-peer> <uptime> <expires> <internal> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

mrouter

Display multicast routers detected

otv

(Optional) IGMP Snooping OTV information

vlan

(Optional) Display VLAN multicast router information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD multicast router information

bdid

(Optional) Specify BD

detail

(Optional) Display detailed mrouter information

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

TABLE_intf

(Optional)

if-name

(Optional)

uptime

(Optional)

expires

(Optional)

static

(Optional)

dynamic

(Optional)

internal

(Optional)

vpc

(Optional)

fabricpath-core-port

(Optional)

co-learned

(Optional)

user-configured

(Optional)

learnt-by-peer

(Optional)

Command Mode

- /exec

show ip igmp snooping pw vlan brief

show ip igmp snooping pw vlan brief [ __readonly__ <vlan-id> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

pw

IGMP Snooping PW information

vlan

Display VLAN/BD information

brief

Brief output

__readonly__

(Optional)

vlan-id

(Optional)

Command Mode

- /exec

show ip igmp snooping querier

show ip igmp snooping querier [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ __readonly__ [ TABLE_vlan <vlan-id> <qa> <qv> [ <expires> ] <qiod> <qname> <int> [ <last_member_query_count> ] [ <config_last_member_query_count> ] [ <snooping_version> ] [ <config_qv> ] [ <robust> ] [ <config_robust> ] [ <startup_query_count> ] [ <config_startup_query_count> ] [ <startup_query_interval> ] [ <config_startup_query_interval> ] [ <mbr_query_interval> ] [ <config_mbr_query_interval> ] [ <snooping_query_intvl> ] [ <config_snooping_query_intvl> ] [ <gquery_response_time> ] [ <config_gquery_response_time> ] [ <querier_timeout> ] [ <querier_timeout_flag> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

querier

Display snooping querier information

vlan

(Optional) Display VLAN IGMP snooping querier information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD IGMP snooping querier information

bdid

(Optional) Specify BD

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

qa

(Optional)

expires

(Optional)

qv

(Optional)

qiod

(Optional)

qname

(Optional)

int

(Optional)

last_member_query_count

(Optional)

config_last_member_query_count

(Optional)

snooping_version

(Optional)

config_qv

(Optional)

robust

(Optional)

config_robust

(Optional)

startup_query_count

(Optional)

config_startup_query_count

(Optional)

startup_query_interval

(Optional)

config_startup_query_interval

(Optional)

mbr_query_interval

(Optional)

config_mbr_query_interval

(Optional)

snooping_query_intvl

(Optional)

config_snooping_query_intvl

(Optional)

gquery_response_time

(Optional)

config_gquery_response_time

(Optional)

querier_timeout

(Optional)

querier_timeout_flag

(Optional)

Command Mode

- /exec

show ip igmp snooping report statistics

show ip igmp snooping { report-policy | access-group } statistics [ vlan <vlan> ] [ __readonly__ [ TABLE_vlanid { <vlan-id> <rpm-type> <policy-name> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

report-policy

IGMP Report Policy

access-group

IGMP access-group

statistics

Policy statistics

vlan

(Optional) Display VLAN IGMP snooping policy statistics information

vlan

(Optional) Specify VLAN

__readonly__

(Optional)

TABLE_vlanid

(Optional)

vlan-id

(Optional)

rpm-type

(Optional)

policy-name

(Optional)

Command Mode

- /exec

show ip igmp snooping snmp mib adminMode

show ip igmp snooping snmp mib adminMode [ __readonly__ <cisAdminMode> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

adminMode

Indicates the administrative snooping mode of IGMP Snooping feature

__readonly__

(Optional) Read Only

cisAdminMode

(Optional) mib object cisAdminMode

Command Mode

- /exec

show ip igmp snooping snmp mib aliasingMode

show ip igmp snooping snmp mib aliasingMode [ __readonly__ <cisAddressAliasingMode> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

aliasingMode

Indicates the current IGMP Address Aliasing Mode of the device

__readonly__

(Optional) Read Only

cisAddressAliasingMode

(Optional) mib object cisAddressAliasingMode

Command Mode

- /exec

show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus

show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus [ __readonly__ <cisV3ProcessEnabledOperStatus> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

cisV3ProcessEnableOperStatus

Indicates the current operational status of IGMP v3 processing in the system

__readonly__

(Optional) Read Only

cisV3ProcessEnabledOperStatus

(Optional) mib object cisV3ProcessEnabledOperStatus

Command Mode

- /exec

show ip igmp snooping snmp mib explicitTrackingTable

show ip igmp snooping snmp mib explicitTrackingTable [ vlan <cisVlanIndex-in> ] [ __readonly__ TABLE_cisVlanExplicitTrackingTable <cisVlanIndex-out> <cisVlanExplicitTrackingEnabled> <cisVlanExplicitTrackingLimit> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

explicitTrackingTable

Show mib table cisVlanExplicitTrackingTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisVlanExplicitTrackingTable

(Optional)

cisVlanIndex-out

(Optional) mib table index cisVlanIndex

cisVlanExplicitTrackingEnabled

(Optional) mib object cisVlanExplicitTrackingEnabled

cisVlanExplicitTrackingLimit

(Optional) mib object cisVlanExplicitTrackingLimit

Command Mode

- /exec

show ip igmp snooping snmp mib fallBackTime

show ip igmp snooping snmp mib fallBackTime [ __readonly__ <cisFallbackTime> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

fallBackTime

Indicates the time the IGMP address aliasing mode is fallback

__readonly__

(Optional) Read Only

cisFallbackTime

(Optional) mib object cisFallbackTime

Command Mode

- /exec

show ip igmp snooping snmp mib fastBlockEnabled

show ip igmp snooping snmp mib fastBlockEnabled [ __readonly__ <cisFastBlockEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

fastBlockEnabled

Indicates whether Fast-Block mechanism has been enabled for the system

__readonly__

(Optional) Read Only

cisFastBlockEnabled

(Optional) mib object cisFastBlockEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib fastleaveenabled

show ip igmp snooping snmp mib fastleaveenabled [ __readonly__ <cisFastLeaveEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

fastleaveenabled

Check if fastleave is enabled

__readonly__

(Optional) Read Only

cisFastLeaveEnabled

(Optional) mib object cisFastLeaveEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib filterStatsTable

show ip igmp snooping snmp mib filterStatsTable [ interface <ifIndex-in> vlan <cisFilterStatsVlanNumber-in> ] [ __readonly__ TABLE_cisFilterStatsTable <ifIndex-out> <cisFilterStatsVlanNumber-out> <cisFilterAccessGroupDenied> <cisFilterLimitDenied> <cisFilterTotalLimitDenied> <cisFilterMinVersionDenied> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

filterStatsTable

Display VLAN/BD Filter Group

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

vlan

(Optional) Display Interface access group VLAN/BD information

cisFilterStatsVlanNumber-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisFilterStatsTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisFilterStatsVlanNumber-out

(Optional) mib table index cisFilterStatsVlanNumber

cisFilterAccessGroupDenied

(Optional) mib object cisFilterAccessGroupDenied

cisFilterLimitDenied

(Optional) mib object cisFilterLimitDenied

cisFilterTotalLimitDenied

(Optional) mib object cisFilterTotalLimitDenied

cisFilterMinVersionDenied

(Optional) mib object cisFilterMinVersionDenied

Command Mode

- /exec

show ip igmp snooping snmp mib ifAccessGroupTable

show ip igmp snooping snmp mib ifAccessGroupTable [ interface <ifIndex-in> vlan <cisIfAccessGroupVlan-in> ] [ __readonly__ TABLE_cisIfAccessGroupTable <ifIndex-out> <cisIfAccessGroupVlan-out> <cisIfAccessGroupsChannelsAllowed> <cisIfAccessGroupStorageType> <cisIfAccessGroupRowStatus> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

ifAccessGroupTable

Display interface access group

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

vlan

(Optional) Display Interface access group VLAN/BD information

cisIfAccessGroupVlan-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisIfAccessGroupTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisIfAccessGroupVlan-out

(Optional) mib table index cisIfAccessGroupVlan

cisIfAccessGroupsChannelsAllowed

(Optional) mib object cisIfAccessGroupsChannelsAllowed

cisIfAccessGroupStorageType

(Optional) mib object cisIfAccessGroupStorageType

cisIfAccessGroupRowStatus

(Optional) mib object cisIfAccessGroupRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib ifConfigTable

show ip igmp snooping snmp mib ifConfigTable [ interface <ifIndex-in> ] [ __readonly__ TABLE_cisIfConfigTable <ifIndex-out> <cisIfTopoChangeFloodEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

ifConfigTable

Display interface configuration

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

__readonly__

(Optional)

TABLE_cisIfConfigTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisIfTopoChangeFloodEnabled

(Optional) mib object cisIfTopoChangeFloodEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib ifLimitTable

show ip igmp snooping snmp mib ifLimitTable [ interface <ifIndex-in> vlan <cisIfLimitVlanNumber-in> ] [ __readonly__ TABLE_cisIfLimitTable <ifIndex-out> <cisIfLimitVlanNumber-out> <cisIfLimitMax> <cisIfLimitExcludeAccessGrp> <cisIfLimitStorageType> <cisIfLimitRowStatus> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

ifLimitTable

Display interface configuration

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

vlan

(Optional) Display Interface Limit VLAN/BD informaition

cisIfLimitVlanNumber-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisIfLimitTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisIfLimitVlanNumber-out

(Optional) mib table index cisIfLimitVlanNumber

cisIfLimitMax

(Optional) mib object cisIfLimitMax

cisIfLimitExcludeAccessGrp

(Optional) mib object cisIfLimitExcludeAccessGrp

cisIfLimitStorageType

(Optional) mib object cisIfLimitStorageType

cisIfLimitRowStatus

(Optional) mib object cisIfLimitRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib ifLimitTotalTable

show ip igmp snooping snmp mib ifLimitTotalTable [ interface <ifIndex-in> ] [ __readonly__ TABLE_cisIfLimitTotalTable <ifIndex-out> <cisIfLimitTotalLimitMax> <cisIfLimitTotalExcludeAccessGrp> <cisIfLimitTotalStorageType> <cisIfLimitTotalRowStatus> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

ifLimitTotalTable

Display interface configuration

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

__readonly__

(Optional)

TABLE_cisIfLimitTotalTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisIfLimitTotalLimitMax

(Optional) mib object cisIfLimitTotalLimitMax

cisIfLimitTotalExcludeAccessGrp

(Optional) mib object cisIfLimitTotalExcludeAccessGrp

cisIfLimitTotalStorageType

(Optional) mib object cisIfLimitTotalStorageType

cisIfLimitTotalRowStatus

(Optional) mib object cisIfLimitTotalRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib igmpsnoopingenabled

show ip igmp snooping snmp mib igmpsnoopingenabled [ __readonly__ <cisIgmpSnoopingEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

igmpsnoopingenabled

Check if IGMP snooping is enabled

__readonly__

(Optional) Read Only

cisIgmpSnoopingEnabled

(Optional) mib object cisIgmpSnoopingEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib iterfaceStatsTable

show ip igmp snooping snmp mib iterfaceStatsTable [ interface <ifIndex-in> ] [ __readonly__ TABLE_cisInterfaceStatsTable <ifIndex-out> <cisTxGeneralQueries> <cisTxGroupSpecificQueries> <cisTxReports> <cisTxLeaves> <cisRxGeneralQueries> <cisRxGroupSpecificQueries> <cisRxReports> <cisRxLeaves> <cisRxValidPackets> <cisRxInvalidPackets> <cisRxOtherPackets> <cisRxMACGeneralQueries> <cisRxTopoNotifications> <cisV3Allows> <cisV3Blocks> <cisV3IsIncluded> <cisV3IsExcluded> <cisV3ToIncluded> <cisV3ToExcluded> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

iterfaceStatsTable

Display interface stats

interface

(Optional) Display interface information

ifIndex-in

(Optional) Interface Index

__readonly__

(Optional)

TABLE_cisInterfaceStatsTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisTxGeneralQueries

(Optional) mib object cisTxGeneralQueries

cisTxGroupSpecificQueries

(Optional) mib object cisTxGroupSpecificQueries

cisTxReports

(Optional) mib object cisTxReports

cisTxLeaves

(Optional) mib object cisTxLeaves

cisRxGeneralQueries

(Optional) mib object cisRxGeneralQueries

cisRxGroupSpecificQueries

(Optional) mib object cisRxGroupSpecificQueries

cisRxReports

(Optional) mib object cisRxReports

cisRxLeaves

(Optional) mib object cisRxLeaves

cisRxValidPackets

(Optional) mib object cisRxValidPackets

cisRxInvalidPackets

(Optional) mib object cisRxInvalidPackets

cisRxOtherPackets

(Optional) mib object cisRxOtherPackets

cisRxMACGeneralQueries

(Optional) mib object cisRxMACGeneralQueries

cisRxTopoNotifications

(Optional) mib object cisRxTopoNotifications

cisV3Allows

(Optional) mib object cisV3Allows

cisV3Blocks

(Optional) mib object cisV3Blocks

cisV3IsIncluded

(Optional) mib object cisV3IsIncluded

cisV3IsExcluded

(Optional) mib object cisV3IsExcluded

cisV3ToIncluded

(Optional) mib object cisV3ToIncluded

cisV3ToExcluded

(Optional) mib object cisV3ToExcluded

Command Mode

- /exec

show ip igmp snooping snmp mib lastMemeberQueryCount

show ip igmp snooping snmp mib lastMemeberQueryCount [ __readonly__ <cisLastMemberQueryCount> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

lastMemeberQueryCount

Specifies the Last Member Query Count value of this device

__readonly__

(Optional) Read Only

cisLastMemberQueryCount

(Optional) mib object cisLastMemberQueryCount

Command Mode

- /exec

show ip igmp snooping snmp mib lastMemeberQueryInterval

show ip igmp snooping snmp mib lastMemeberQueryInterval [ __readonly__ <cisLastMemberQueryInterval> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

lastMemeberQueryInterval

Specifies the IGMP Last Member Query Interval of this device

__readonly__

(Optional) Read Only

cisLastMemberQueryInterval

(Optional) mib object cisLastMemberQueryInterval

Command Mode

- /exec

show ip igmp snooping snmp mib leaveQueryType

show ip igmp snooping snmp mib leaveQueryType [ __readonly__ <cisLeaveQueryType> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

leaveQueryType

Indicates type of leave query

__readonly__

(Optional) Read Only

cisLeaveQueryType

(Optional) mib object cisLeaveQueryType

Command Mode

- /exec

show ip igmp snooping snmp mib mcastGroupTable

show ip igmp snooping snmp mib mcastGroupTable [ vlan <cisMcastGroupVlanIndex-in> <cisMcastGroupAddressType-in> <cisMcastGroupAddress-in> ] [ __readonly__ TABLE_cisMcastGroupTable <cisMcastGroupVlanIndex-out> <cisMcastGroupAddressType-out> <cisMcastGroupAddress-out> <cisMcastGroupFilterMode> <cisMcastGroupIgmpVersion> <cisMcastGroupIncludeHostCount> <cisMcastGroupExcludeHostCount> <cisMcastGroupPortList> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

mcastGroupTable

Show mib table cisMcastGroupTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMcastGroupVlanIndex-in

(Optional) Specify VLAN/BD

cisMcastGroupAddressType-in

(Optional) Address type

cisMcastGroupAddress-in

(Optional) Group address

__readonly__

(Optional)

TABLE_cisMcastGroupTable

(Optional)

cisMcastGroupVlanIndex-out

(Optional) mib table index cisMcastGroupVlanIndex

cisMcastGroupAddressType-out

(Optional) mib table index cisMcastGroupAddressType

cisMcastGroupAddress-out

(Optional) mib table index cisMcastGroupAddress

cisMcastGroupFilterMode

(Optional) mib object cisMcastGroupFilterMode

cisMcastGroupIgmpVersion

(Optional) mib object cisMcastGroupIgmpVersion

cisMcastGroupIncludeHostCount

(Optional) mib object cisMcastGroupIncludeHostCount

cisMcastGroupExcludeHostCount

(Optional) mib object cisMcastGroupExcludeHostCount

cisMcastGroupPortList

(Optional) mib object cisMcastGroupPortList

Command Mode

- /exec

show ip igmp snooping snmp mib mcastRouterCfgTable

show ip igmp snooping snmp mib mcastRouterCfgTable [ interface <ifIndex-in> vlan <cisMcastRouterVlanIndex-in> ] [ __readonly__ TABLE_cisMcastRouterCfgTable <ifIndex-out> <cisMcastRouterVlanIndex-out> <cisMcastRouterType> <cisMcastRouterRowStatus> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

mcastRouterCfgTable

show mib table cisMcastRouterCfgTable

interface

(Optional) Display Mcast Router Interface Information

ifIndex-in

(Optional) Specify the Mcast router interface

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMcastRouterVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisMcastRouterCfgTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisMcastRouterVlanIndex-out

(Optional) mib table index cisMcastRouterVlanIndex

cisMcastRouterType

(Optional) mib object cisMcastRouterType

cisMcastRouterRowStatus

(Optional) mib object cisMcastRouterRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib mcastRouterConfigTable

show ip igmp snooping snmp mib mcastRouterConfigTable [ vlan <cisMcastRouterConfigVlanIndex-in> interface <ifIndex-in> ] [ __readonly__ TABLE_cisMcastRouterConfigTable <ifIndex-out> <cisMcastRouterConfigVlanIndex-out> <cisMcastRouterConfigRouterType> <cisMcastRouterConfigStorageType> <cisMcastRouterConfigRowStatus> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

mcastRouterConfigTable

show mib table cisMcastRouterConfigTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMcastRouterConfigVlanIndex-in

(Optional) Specify VLAN/BD

interface

(Optional) Display Mcast Router Interface Information

ifIndex-in

(Optional) Specify the Mcast router interface index

__readonly__

(Optional)

TABLE_cisMcastRouterConfigTable

(Optional)

cisMcastRouterConfigVlanIndex-out

(Optional) mib table index cisMcastRouterConfigVlanIndex

ifIndex-out

(Optional) mib table index ifIndex

cisMcastRouterConfigRouterType

(Optional) mib object cisMcastRouterConfigRouterType

cisMcastRouterConfigStorageType

(Optional) mib object cisMcastRouterConfigStorageType

cisMcastRouterConfigRowStatus

(Optional) mib object cisMcastRouterConfigRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib multicastGroupConfigTable

show ip igmp snooping snmp mib multicastGroupConfigTable [ vlan <cisMulticastGroupConfVlanIndex-in> <cisMulticastGroupConfCeVlanIndex-in> <cisMulticastGroupConfAddressType-in> <cisMulticastGroupConfAddress-in> <cisMulticastGroupConfSourceAddress-in> <cisMulticastGroupConfPortRange-in> ] [ __readonly__ TABLE_cisMulticastGroupConfigTable <cisMulticastGroupConfVlanIndex-out> <cisMulticastGroupConfCeVlanIndex-out> <cisMulticastGroupConfAddressType-out> <cisMulticastGroupConfAddress-out> <cisMulticastGroupConfSourceAddress-out> <cisMulticastGroupConfPortRange-out> <cisMulticastGroupConfPortList> <cisMulticastGroupConfStorageType> <cisMulticastGroupConfRowStatus> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

multicastGroupConfigTable

show mib table cisMulticastGroupConfigTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMulticastGroupConfVlanIndex-in

(Optional) Specify VLAN/BD

cisMulticastGroupConfCeVlanIndex-in

(Optional) Specify consumer edge VLAN/BD

cisMulticastGroupConfAddressType-in

(Optional) Group Address Type

cisMulticastGroupConfAddress-in

(Optional) Group address

cisMulticastGroupConfSourceAddress-in

(Optional) source address

cisMulticastGroupConfPortRange-in

(Optional) port Range

__readonly__

(Optional)

TABLE_cisMulticastGroupConfigTable

(Optional)

cisMulticastGroupConfVlanIndex-out

(Optional) mib table index cisMulticastGroupConfVlanIndex

cisMulticastGroupConfCeVlanIndex-out

(Optional) mib table index cisMulticastGroupConfCeVlanIndex

cisMulticastGroupConfAddressType-out

(Optional) mib table index cisMulticastGroupConfAddressType

cisMulticastGroupConfAddress-out

(Optional) mib table index cisMulticastGroupConfAddress

cisMulticastGroupConfSourceAddress-out

(Optional) mib table index cisMulticastGroupConfSourceAddress

cisMulticastGroupConfPortRange-out

(Optional) mib table index cisMulticastGroupConfPortRange

cisMulticastGroupConfPortList

(Optional) mib object cisMulticastGroupConfPortList

cisMulticastGroupConfStorageType

(Optional) mib object cisMulticastGroupConfStorageType

cisMulticastGroupConfRowStatus

(Optional) mib object index cisMulticastGroupConfRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib multicastGroupPortListTable

show ip igmp snooping snmp mib multicastGroupPortListTable [ vlan <cisMulticastGroupVlanIndex-in> <cisMulticastGroupCeVlanIndex-in> <cisMulticastGroupAddressType-in> <cisMulticastGroupAddress-in> <cisMulticastGroupSourceAddress-in> <cisMulticastGroupPortRangeIndex-in> ] [ __readonly__ TABLE_cisMulticastGroupPortListTable <cisMulticastGroupVlanIndex-out> <cisMulticastGroupCeVlanIndex-out> <cisMulticastGroupAddressType-out> <cisMulticastGroupAddress-out> <cisMulticastGroupSourceAddress-out> <cisMulticastGroupPortRangeIndex-out> <cisMulticastGroupPortList> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

multicastGroupPortListTable

show mib table multicastGroupPortListTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMulticastGroupVlanIndex-in

(Optional) Specify VLAN/BD

cisMulticastGroupCeVlanIndex-in

(Optional) Specify consumer edge VLAN/BD

cisMulticastGroupAddressType-in

(Optional) Group Address Type

cisMulticastGroupAddress-in

(Optional) Group address

cisMulticastGroupSourceAddress-in

(Optional) source address

cisMulticastGroupPortRangeIndex-in

(Optional) port Range Index

__readonly__

(Optional)

TABLE_cisMulticastGroupPortListTable

(Optional)

cisMulticastGroupVlanIndex-out

(Optional) mib table index cisMulticastGroupVlanIndex

cisMulticastGroupCeVlanIndex-out

(Optional) mib table index cisMulticastGroupCeVlanIndex

cisMulticastGroupAddressType-out

(Optional) mib table index cisMulticastGroupAddressType

cisMulticastGroupAddress-out

(Optional) mib table index cisMulticastGroupAddress

cisMulticastGroupSourceAddress-out

(Optional) mib table index cisMulticastGroupSourceAddress

cisMulticastGroupPortRangeIndex-out

(Optional) mib table index cisMulticastGroupPortRangeIndex

cisMulticastGroupPortList

(Optional) mib object cisMulticastGroupPortList

Command Mode

- /exec

show ip igmp snooping snmp mib multicastGroupTable

show ip igmp snooping snmp mib multicastGroupTable [ vlan <cisMulticastGroupVlanIndex-in> <cisMulticastGroupCeVlanIndex-in> <cisMulticastGroupAddressType-in> <cisMulticastGroupAddress-in> <cisMulticastGroupSourceAddress-in> ] [ __readonly__ TABLE_cisMulticastGroupTable <cisMulticastGroupVlanIndex-out> <cisMulticastGroupCeVlanIndex-out> <cisMulticastGroupAddressType-out> <cisMulticastGroupAddress-out> <cisMulticastGroupSourceAddress-out> <cisMulticastGroupGroupType> <cisMulticastGroupIgmpVersion> <cisMulticastGroupSourceUpTime> <cisMulticastGroupSourceExpires> <cisMulticastGroupInclHostCount> <cisMulticastGroupExclHostCount> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

multicastGroupTable

show mib table multicastGroupTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMulticastGroupVlanIndex-in

(Optional) Specify VLAN/BD

cisMulticastGroupCeVlanIndex-in

(Optional) Specify consumer edge VLAN/BD

cisMulticastGroupAddressType-in

(Optional) Group Address Type

cisMulticastGroupAddress-in

(Optional) Group address

cisMulticastGroupSourceAddress-in

(Optional) Source address

__readonly__

(Optional)

TABLE_cisMulticastGroupTable

(Optional)

cisMulticastGroupVlanIndex-out

(Optional) mib table index cisMulticastGroupVlanIndex

cisMulticastGroupCeVlanIndex-out

(Optional) mib table index cisMulticastGroupCeVlanIndex

cisMulticastGroupAddressType-out

(Optional) mib table index cisMulticastGroupAddressType

cisMulticastGroupAddress-out

(Optional) mib table index cisMulticastGroupAddress

cisMulticastGroupSourceAddress-out

(Optional) mib table index cisMulticastGroupSourceAddress

cisMulticastGroupGroupType

(Optional) mib object cisMulticastGroupGroupType

cisMulticastGroupIgmpVersion

(Optional) mib object cisMulticastGroupIgmpVersion

cisMulticastGroupSourceUpTime

(Optional) mib object cisMulticastGroupSourceUpTime

cisMulticastGroupSourceExpires

(Optional) mib object cisMulticastGroupSourceExpires

cisMulticastGroupInclHostCount

(Optional) mib object cisMulticastGroupInclHostCount

cisMulticastGroupExclHostCount

(Optional) mib object cisMulticastGroupExclHostCount

Command Mode

- /exec

show ip igmp snooping snmp mib operMode

show ip igmp snooping snmp mib operMode [ __readonly__ <cisOperMode> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

operMode

Indicates the operational snooping mode of the device

__readonly__

(Optional) Read Only

cisOperMode

(Optional) mib object cisOperMode

Command Mode

- /exec

show ip igmp snooping snmp mib querierTable

show ip igmp snooping snmp mib querierTable [ vlan <cisIgmpQuerierVlanIndex-in> ] [ __readonly__ TABLE_cisIgmpQuerierTable <cisIgmpQuerierVlanIndex-out> <cisIgmpQuerierEnabled> <cisIgmpQuerierState> <cisIgmpQuerierVersion> <cisIgmpQuerierAddressType> <cisIgmpQuerierAddress> <cisIgmpQuerierInterface> <cisIgmpQuerierTcnQueryCount> <cisIgmpQuerierTcnQueryInterval> <cisIgmpQuerierTimerExpiry> <cisIgmpQuerierMaxResponseTime> <cisIgmpQuerierQueryInterval> <cisIgmpQuerierAdminAddressType> <cisIgmpQuerierAdminAddress> <cisIgmpQuerierAdminVersion> <cisIgmpQuerierTcnQueryPending> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

querierTable

Show mib table cisIgmpQuerierTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisIgmpQuerierVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisIgmpQuerierTable

(Optional)

cisIgmpQuerierVlanIndex-out

(Optional) mib table index cisIgmpQuerierVlanIndex

cisIgmpQuerierEnabled

(Optional) mib object cisIgmpQuerierEnabled

cisIgmpQuerierState

(Optional) mib object cisIgmpQuerierState

cisIgmpQuerierVersion

(Optional) mib object cisIgmpQuerierVersion

cisIgmpQuerierAddressType

(Optional) mib object cisIgmpQuerierAddressType

cisIgmpQuerierAddress

(Optional) mib object cisIgmpQuerierAddress

cisIgmpQuerierInterface

(Optional) mib object cisIgmpQuerierInterface

cisIgmpQuerierTcnQueryCount

(Optional) mib object cisIgmpQuerierTcnQueryCount

cisIgmpQuerierTcnQueryInterval

(Optional) mib object cisIgmpQuerierTcnQueryInterval

cisIgmpQuerierTimerExpiry

(Optional) mib object cisIgmpQuerierTimerExpiry

cisIgmpQuerierMaxResponseTime

(Optional) mib object cisIgmpQuerierMaxResponseTime

cisIgmpQuerierQueryInterval

(Optional) mib object cisIgmpQuerierQueryInterval

cisIgmpQuerierAdminAddressType

(Optional) mib object cisIgmpQuerierAdminAddressType

cisIgmpQuerierAdminAddress

(Optional) mib object cisIgmpQuerierAdminAddress

cisIgmpQuerierAdminVersion

(Optional) mib object cisIgmpQuerierAdminVersion

cisIgmpQuerierTcnQueryPending

(Optional) mib object cisIgmpQuerierTcnQueryPending

Command Mode

- /exec

show ip igmp snooping snmp mib reportsuppressionenabled

show ip igmp snooping snmp mib reportsuppressionenabled [ __readonly__ <cisReportSuppressionEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

reportsuppressionenabled

Check if reportsuppression is enabled

__readonly__

(Optional) Read Only

cisReportSuppressionEnabled

(Optional) mib object cisReportSuppressionEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib robustnessVariable

show ip igmp snooping snmp mib robustnessVariable [ __readonly__ <cisRobustnessVariable> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

robustnessVariable

Specifies the Robustness Variable of this device

__readonly__

(Optional) Read Only

cisRobustnessVariable

(Optional) mib object cisRobustnessVariable

Command Mode

- /exec

show ip igmp snooping snmp mib routerAlertCheckEnabled

show ip igmp snooping snmp mib routerAlertCheckEnabled [ __readonly__ <cisLastMemberQueryCount> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

routerAlertCheckEnabled

Specifies whether checking of Router-Alert option is enabled for IGMP traffic in the system

__readonly__

(Optional) Read Only

cisLastMemberQueryCount

(Optional) mib object cisLastMemberQueryCount

Command Mode

- /exec

show ip igmp snooping snmp mib sourceOnlyEntryAgingTime

show ip igmp snooping snmp mib sourceOnlyEntryAgingTime [ __readonly__ <cisSourceOnlyEntryAgingTime> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

sourceOnlyEntryAgingTime

Specifies the aging time in seconds for Source Only multicast entries

__readonly__

(Optional) Read Only

cisSourceOnlyEntryAgingTime

(Optional) mib object cisSourceOnlyEntryAgingTime

Command Mode

- /exec

show ip igmp snooping snmp mib sourceOnlyLearningEnabled

show ip igmp snooping snmp mib sourceOnlyLearningEnabled [ __readonly__ <cisSourceOnlyLearningEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

sourceOnlyLearningEnabled

Specifies whether Source Only multicast entries are learned by IGMP Snooping or not

__readonly__

(Optional) Read Only

cisSourceOnlyLearningEnabled

(Optional) mib object cisSourceOnlyLearningEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib tcnFloodQueryCount

show ip igmp snooping snmp mib tcnFloodQueryCount [ __readonly__ <cisTopoChangeFloodQueryCount> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

tcnFloodQueryCount

Specifies the flooding period for multicast traffic upon receiving Topology Change Notifications

__readonly__

(Optional) Read Only

cisTopoChangeFloodQueryCount

(Optional) mib object cisTopoChangeFloodQueryCount

Command Mode

- /exec

show ip igmp snooping snmp mib timeToLiveCheckEnabled

show ip igmp snooping snmp mib timeToLiveCheckEnabled [ __readonly__ <cisTimeToLiveCheckEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

timeToLiveCheckEnabled

Specifies whether Time-To-Live (TTL) check is enabled when processing IGMP packets in the system

__readonly__

(Optional) Read Only

cisTimeToLiveCheckEnabled

(Optional) mib object cisTimeToLiveCheckEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled

show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled [ __readonly__ <cisTopoChangeQuerySolicitEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

topoChanageQuerySolicitEnabled

Specifies whether the device running IGMP Snooping will solicit IGMP General Queries from the Querier upon receiving a TCN

__readonly__

(Optional) Read Only

cisTopoChangeQuerySolicitEnabled

(Optional) mib object cisTopoChangeQuerySolicitEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus

show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus [ __readonly__ <cisV3ProcessEnabledAdminStatus> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

v3ProcessEnabledAdminStatus

Indicates the administrative status of IGMP v3 processing in the system

__readonly__

(Optional) Read Only

cisV3ProcessEnabledAdminStatus

(Optional) mib object cisV3ProcessEnabledAdminStatus

Command Mode

- /exec

show ip igmp snooping snmp mib v3SnoopingSupport

show ip igmp snooping snmp mib v3SnoopingSupport [ __readonly__ <cisV3SnoopingSupport> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

v3SnoopingSupport

Indicates IGMP Snooping support for IGMPv3

__readonly__

(Optional) Read Only

cisV3SnoopingSupport

(Optional) mib object cisV3SnoopingSupport

Command Mode

- /exec

show ip igmp snooping snmp mib vlanFilterConfigTable

show ip igmp snooping snmp mib vlanFilterConfigTable [ vlan <cisVlanIndex-in> ] [ __readonly__ TABLE_cisVlanFilterConfigTable <cisVlanIndex-out> <cisVlanFilterAccessGroup> <cisVlanFilterLimitMax> <cisVlanFilterLimitExclAccessGrp> <cisVlanFilterMinVersionAllowed> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

vlanFilterConfigTable

Display VLAN/BD Filter Group

vlan

(Optional) Display Interface access group VLAN/BD information

cisVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisVlanFilterConfigTable

(Optional)

cisVlanIndex-out

(Optional) mib talbe index cisVlanIndex>

cisVlanFilterAccessGroup

(Optional) mib table index cisVlanFilterAccessGroup

cisVlanFilterLimitMax

(Optional) mib object cisVlanFilterLimitMax

cisVlanFilterLimitExclAccessGrp

(Optional) mib object cisVlanFilterLimitExclAccessGrp

cisVlanFilterMinVersionAllowed

(Optional) mib object cisVlanFilterMinVersionAllowed

Command Mode

- /exec

show ip igmp snooping snmp mib vlanconfigtable

show ip igmp snooping snmp mib vlanconfigtable [ vlan <cisVlanIndex-in> ] [ __readonly__ TABLE_cisVlanConfigTable <cisVlanIndex-out> <cisVlanIgmpSnoopingEnabled> <cisVlanFastLeaveEnabled> <cisVlanIgmpSnoopingOperMode> <cisVlanIgmpSnoopingLearningMode> <cisVlanReportSuppressionEnabled> <cisVlanLeaveQueryInterval> <cisVlanLastMemberQueryCount> <cisVlanRobustnessVariable> <cisVlanTimeToLiveCheckEnabled> <cisVlanRouterAlertCheckEnabled> ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

vlanconfigtable

Show mib table cisVlanConfigTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisVlanConfigTable

(Optional)

cisVlanIndex-out

(Optional) mib table index cisVlanIndex

cisVlanIgmpSnoopingEnabled

(Optional) mib object cisVlanIgmpSnoopingEnabled

cisVlanFastLeaveEnabled

(Optional) mib object cisVlanFastLeaveEnabled

cisVlanIgmpSnoopingOperMode

(Optional) mib object cisVlanIgmpSnoopingOperMode

cisVlanIgmpSnoopingLearningMode

(Optional) mib object cisVlanIgmpSnoopingLearningMode

cisVlanReportSuppressionEnabled

(Optional) mib object cisVlanReportSuppressionEnabled

cisVlanLeaveQueryInterval

(Optional) mib object cisVlanLeaveQueryInterval

cisVlanLastMemberQueryCount

(Optional) mib object cisVlanLastMemberQueryCount

cisVlanRobustnessVariable

(Optional) mib object cisVlanRobustnessVariable

cisVlanTimeToLiveCheckEnabled

(Optional) mib object cisVlanTimeToLiveCheckEnabled

cisVlanRouterAlertCheckEnabled

(Optional) mib object cisVlanRouterAlertCheckEnabled

Command Mode

- /exec

show ip igmp snooping statistics

show ip igmp snooping statistics [ global | vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ [ <pr> ] [ <inv_pkt> ] [ <pnv> ] [ <loopbkpkt> ] [ <mrdloopbk> ] [ <pf> ] [ <vpcdrqs> ] [ <vpcdrqr> ] [ <vpcdrqf> ] [ <vpcdrus> ] [ <vpcdrur> ] [ <vpcdruf> ] [ <vpccfssf> ] [ <vpccfsrs> ] [ <vpccfsrr> ] [ <vpccfsrf> ] [ <vpccfsrfp> ] [ <vpccfsurls> ] [ <vpccfsurlr> ] [ <vpccfsurlf> ] [ <vpccfsrls> ] [ <vpccfsrlr> ] [ <vpccfsrlf> ] [ <inv_iod> ] [ <stptcnr> ] [ <imapif> ] [ <mfreqr> ] [ <mfcmps> ] [ <mfdgcmps> ] [ <bufsnt> ] [ <bufackr> ] [ <vpcmismatch> ] [ { TABLE_vlan [ <vlan-id> ] [ <ut> ] [ <vpr> ] [ <v1rr> ] [ <v2rr> ] [ <v3rr> ] [ <v1qr> ] [ <v2qr> ] [ <v3qr> ] [ <v2lr> ] [ <phr> ] [ <irr> ] [ <iqr> ] [ <v1rs> ] [ <v2rs> ] [ <v2ls> ] [ <v3gs> ] [ <vmr> ] [ <upr> ] [ <qo> ] [ <v2ro> ] [ <v2lo> ] [ <v3ro> ] [ <vpsr> ] [ <str> ] [ <mps> ] [ <mpr> ] [ <mpe> ] [ <cps> ] [ <cpr> ] [ <cpe> ] [ <repflooded> ] [ <repfwded> ] } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

statistics

Display packet/error counter statistics

global

(Optional) Display global statistics

vlan

(Optional) Display VLAN statistics

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD statistics

bdid

(Optional) Specify BD

__readonly__

(Optional)

pr

(Optional)

inv_pkt

(Optional)

pnv

(Optional)

loopbkpkt

(Optional)

mrdloopbk

(Optional)

pf

(Optional)

vpcdrqs

(Optional)

vpcdrqr

(Optional)

vpcdrqf

(Optional)

vpcdrus

(Optional)

vpcdrur

(Optional)

vpcdruf

(Optional)

vpccfssf

(Optional)

vpccfsrs

(Optional)

vpccfsrr

(Optional)

vpccfsrf

(Optional)

vpccfsrfp

(Optional)

vpccfsurls

(Optional)

vpccfsurlr

(Optional)

vpccfsurlf

(Optional)

vpccfsrls

(Optional)

vpccfsrlr

(Optional)

vpccfsrlf

(Optional)

inv_iod

(Optional)

stptcnr

(Optional)

imapif

(Optional)

mfreqr

(Optional)

mfcmps

(Optional)

mfdgcmps

(Optional)

bufsnt

(Optional)

bufackr

(Optional)

vpcmismatch

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

ut

(Optional)

vpr

(Optional)

v1rr

(Optional)

v2rr

(Optional)

v3rr

(Optional)

v1qr

(Optional)

v2qr

(Optional)

v3qr

(Optional)

v2lr

(Optional)

phr

(Optional)

irr

(Optional)

iqr

(Optional)

v1rs

(Optional)

v2rs

(Optional)

v2ls

(Optional)

v3gs

(Optional)

vmr

(Optional)

upr

(Optional)

qo

(Optional)

v2ro

(Optional)

v2lo

(Optional)

v3ro

(Optional)

vpsr

(Optional)

str

(Optional)

cps

(Optional)

cpr

(Optional)

cpe

(Optional)

mps

(Optional)

mpr

(Optional)

mpe

(Optional)

repflooded

(Optional)

repfwded

(Optional)

Command Mode

- /exec

show ip igmp vrf all

show ip igmp vrf all [ __readonly__ { TABLE_vrfname <vrf-name> <vrf-id> <instance> <work-in-txlist> } { TABLE_vrfid <vrf-name-i> <vrf-id-i> <instance-i> <work-in-txlist-i> } ]

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

vrf

Display per-VRF information

all

Display information for all VRFs

__readonly__

(Optional)

TABLE_vrfname

(Optional)

vrf-name

(Optional)

vrf-id

(Optional)

instance

(Optional)

work-in-txlist

(Optional)

TABLE_vrfid

(Optional)

vrf-name-i

(Optional)

vrf-id-i

(Optional)

instance-i

(Optional)

work-in-txlist-i

(Optional)

Command Mode

- /exec

show ip interface

show ip interface { { { brief [ include-secondary ] } | [ <interface> ] | [ <ip-addr> ] } [ operational ] [ vaddr ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } [ __readonly__ [ TABLE_intf [ <vrf-name-out> ] [ <intf-name> ] [ <proto-state> ] [ <link-state> ] [ <admin-state> ] [ <iod> ] [ <first_unnum_iod> ] [ TABLE_unnuminf <unnum-child-inf> ] [ <prefix> ] [ <subnet> ] [ <masklen> ] [ TABLE_secondary_address <prefix1> <subnet1> <masklen1> ] [ <num-addr> ] [ <vaddr-client> ] [ <vaddr-prefix> ] [ <vaddr-subnet> ] [ <vaddr-masklen> ] [ <num-vaddr> ] [ <unnum-intf> ] [ <ip-disabled> ] [ <bcast-addr> ] [ <maddr> ] + [ <num-maddr> ] [ <mtu> ] [ <pref> ] [ <tag> ] [ <proxy-arp> ] [ <lcl-proxy-arp> ] [ <mrouting> ] [ <icmp-redirect> ] [ <dir-bcast> ] [ <ip-forwarding> ] [ <ip-unreach> ] [ <port-unreach> ] [ <urpf-mode> ] [ <ip-ls-type> ] [ <urpf-acl> ] [ <pbr-in> ] [ <pbr-out> ] [ <acl-in> ] [ <acl-out> ] [ <stats-last-reset> ] [ <upkt-sent> ] [ <upkt-recv> ] [ <upkt-fwd> ] [ <upkt-orig> ] [ <upkt-consumed> ] [ <ubyte-sent> ] [ <ubyte-recv> ] [ <ubyte-fwd> ] [ <ubyte-orig> ] [ <ubyte-consumed> ] [ <mpkt-sent> ] [ <mpkt-recv> ] [ <mpkt-fwd> ] [ <mpkt-orig> ] [ <mpkt-consumed> ] [ <mbyte-sent> ] [ <mbyte-recv> ] [ <mbyte-fwd> ] [ <mbyte-orig> ] [ <mbyte-consumed> ] [ <bpkt-sent> ] [ <bpkt-recv> ] [ <bpkt-fwd> ] [ <bpkt-orig> ] [ <bpkt-consumed> ] [ <bbyte-sent> ] [ <bbyte-recv> ] [ <bbyte-fwd> ] [ <bbyte-orig> ] [ <bbyte-consumed> ] [ <lpkt-sent> ] [ <lpkt-recv> ] [ <lpkt-fwd> ] [ <lpkt-orig> ] [ <lpkt-consumed> ] [ <lbyte-sent> ] [ <lbyte-recv> ] [ <lbyte-fwd> ] [ <lbyte-orig> ] [ <lbyte-consumed> ] [ <wccp-outbound> ] [ <wccp-inbound> ] [ <wccp-exclude> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

interface

Display IP related interface information

brief

Display summary of IP interface status and configuration

include-secondary

(Optional) Display summary of all IP addresses

operational

(Optional) Display only interfaces that are administratively enabled

interface

(Optional) Interface name to display

ip-addr

(Optional) Display interface for local IP address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs

vaddr

(Optional) Display virtual IP addresses as well

__readonly__

(Optional)

vrf-name-out

(Optional)

TABLE_intf

(Optional)

intf-name

(Optional)

iod

(Optional)

first_unnum_iod

(Optional)

prefix

(Optional)

proto-state

(Optional)

link-state

(Optional)

admin-state

(Optional)

subnet

(Optional)

masklen

(Optional)

TABLE_unnuminf

(Optional)

unnum-child-inf

(Optional)

TABLE_secondary_address

(Optional)

prefix1

(Optional)

subnet1

(Optional)

masklen1

(Optional)

num-addr

(Optional)

vaddr-client

(Optional)

vaddr-prefix

(Optional)

vaddr-subnet

(Optional)

vaddr-masklen

(Optional)

num-vaddr

(Optional)

unnum-intf

(Optional)

ip-disabled

(Optional)

bcast-addr

(Optional)

maddr

(Optional)

num-maddr

(Optional)

mtu

(Optional)

pref

(Optional)

tag

(Optional)

proxy-arp

(Optional)

lcl-proxy-arp

(Optional)

mrouting

(Optional)

icmp-redirect

(Optional)

dir-bcast

(Optional)

ip-forwarding

(Optional)

ip-unreach

(Optional)

port-unreach

(Optional)

urpf-mode

(Optional)

ip-ls-type

(Optional)

urpf-acl

(Optional)

pbr-in

(Optional)

pbr-out

(Optional)

acl-in

(Optional)

acl-out

(Optional)

stats-last-reset

(Optional)

upkt-sent

(Optional)

upkt-recv

(Optional)

upkt-fwd

(Optional)

upkt-orig

(Optional)

upkt-consumed

(Optional)

ubyte-sent

(Optional)

ubyte-recv

(Optional)

ubyte-fwd

(Optional)

ubyte-orig

(Optional)

ubyte-consumed

(Optional)

mpkt-sent

(Optional)

mpkt-recv

(Optional)

mpkt-fwd

(Optional)

mpkt-orig

(Optional)

mpkt-consumed

(Optional)

mbyte-sent

(Optional)

mbyte-recv

(Optional)

mbyte-fwd

(Optional)

mbyte-orig

(Optional)

mbyte-consumed

(Optional)

bpkt-sent

(Optional)

bpkt-recv

(Optional)

bpkt-fwd

(Optional)

bpkt-orig

(Optional)

bpkt-consumed

(Optional)

bbyte-sent

(Optional)

bbyte-recv

(Optional)

bbyte-fwd

(Optional)

bbyte-orig

(Optional)

bbyte-consumed

(Optional)

lpkt-sent

(Optional)

lpkt-recv

(Optional)

lpkt-fwd

(Optional)

lpkt-orig

(Optional)

lpkt-consumed

(Optional)

lbyte-sent

(Optional)

lbyte-recv

(Optional)

lbyte-fwd

(Optional)

lbyte-orig

(Optional)

lbyte-consumed

(Optional)

wccp-outbound

(Optional)

wccp-inbound

(Optional)

wccp-exclude

(Optional)

Command Mode

- /exec

show ip load-sharing

show ip load-sharing [ __readonly__ { <univer-id-ran-seed> [ <l3-msg-load> ] [ <l34-msg-load> ] [ <dest-addr-load> ] [ <src-dst-ip-gre> ] [ <bad-load> ] [ <gre-outer-hash> ] [ <concatenation> ] [ <rotate> ] [ <src-dst-ip-gtpu> ] } ]

Syntax Description

show

Show running system information

ip

Configure IP features

load-sharing

Display global loadbalance info

__readonly__

(Optional)

univer-id-ran-seed

(Optional)

l3-msg-load

(Optional)

l34-msg-load

(Optional)

dest-addr-load

(Optional)

src-dst-ip-gre

(Optional)

bad-load

(Optional)

gre-outer-hash

(Optional)

concatenation

(Optional)

rotate

(Optional)

src-dst-ip-gtpu

(Optional)

Command Mode

- /exec

show ip local-pt

show ip local-pt [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ip

Display IP information

local-pt

Display local ip address ptree

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip local policy

show ip local policy [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_pbr [ <interface> ] [ <rmap> ] [ <status> ] [ <vrf_name> ] } ]

Syntax Description

show

Show running system information

ip

Display IP information

local

IP local options

policy

Policy routing

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_pbr

(Optional)

interface

(Optional)

rmap

(Optional)

status

(Optional)

vrf_name

(Optional)

Command Mode

- /exec

show ip logging

show ip logging [ hash ] [ __readonly__ ]

Syntax Description

show

Show running system information

ip

Display IP information

logging

Display IP policy logging table

hash

(Optional) logging hash data

__readonly__

(Optional)

Command Mode

- /exec

show ip mbgp

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast | mdt } | all } ] } } [ <ip-addr> [ <ip-mask> [ longer-prefixes ] ] | <ip-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip-addr

(Optional) Display one particular network from the BRIB in detail

ip-mask

(Optional) Mask for one particular prefix in the BRIB

ip-prefix

(Optional) Display one particular prefix from the BRIB in detail

longer-prefixes

(Optional) Display route and more specific routes

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

mdt

(Optional) Display BGP information for multicast distribution tree

all

(Optional) Display BGP information for all address families

Command Mode

- /exec

show ip mbgp

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } { route-map { <rmap-name> | <rmap-name> } | filter-list { <fltrlist-name> | <test_pol_name> } | { community-list { <commlist-name> | <test_pol_name> } | extcommunity-list { <extcommlist-name> | <test_pol_name> } } [ exact-match ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

route-map

Display routes matching the route-map

rmap-name

Route-map name

rmap-name

Known route-map name

filter-list

Display routes matching the filter-list

fltrlist-name

Name of filter-list

community-list

Display routes matching the community-list

extcommunity-list

Display routes matching the extcommunity-list

commlist-name

Name of community-list

extcommlist-name

Name of extcommunity-list

test_pol_name

An existing test-list policy

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

exact-match

(Optional) Exact match of the communities

Command Mode

- /exec

show ip mbgp community

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } community { <regexp-str> | { { <comm-id> | <wellknown-id> } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display BGP information for all address families

community

Display routes matching the BGP communities

regexp-str

Regular expression to match the communities

comm-id

BGP community value

wellknown-id

BGP wellknown community

exact-match

(Optional) Exact match of the communities

Command Mode

- /exec

show ip mbgp dampening

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } dampening { dampened-paths [ regexp <regexp-str> ] | flap-statistics | parameters | history-paths [ regexp <regexp-str> ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampening

Display dampening info

dampened-paths

Display all dampened paths

flap-statistics

Display flap statistics for routes

parameters

Display dampening parameters

history-paths

Display all history paths

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

regexp

(Optional) Display routes matching the AS path regular expression

regexp-str

(Optional) Regular expression to match the AS paths

Command Mode

- /exec

show ip mbgp extcommunity

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } extcommunity { <regexp-str> | { { 4byteas-generic { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display BGP information for all address families

extcommunity

Display routes matching the BGP extcommunities

4byteas-generic

Generic extended community

transitive

Transitive extcommunity

non-transitive

Non-Transitive extcommunity

regexp-str

Regular expression to match the extcommunities

ext-comm-gen-trans

Extcommunity number aa4:nn format

ext-comm-gen-nontrans

Extcommunity number aa4:nn format

exact-match

(Optional) Exact match of the extcommunities

Command Mode

- /exec

show ip mbgp flap-statistics

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

flap-statistics

Display route flap statistics

ip-prefix

(Optional) Display flap statistics for one prefix

ip-addr

(Optional) Display flap statistics for one network

ip-mask

(Optional) Network mask

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

Command Mode

- /exec

show ip mbgp neighbors

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } neighbors { [ { <neighbor-id> | <ipv6-neighbor-id> } [ routes [ advertised | received | dampened ] | advertised-routes | received-routes | paths | flap-statistics ] ] | <neighbor-prefix-id> | <ipv6-neighbor-prefix-id> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

(Optional) Display one particular BGP neighbor

neighbor-prefix-id

Display details for a prefix peering

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

routes

(Optional) Display all routes advertised/received to/from peer

advertised

(Optional) Display all routes advertised to this peer

received

(Optional) Display all routes received from this peer

dampened

(Optional) Display all dampened routes received from this peer

advertised-routes

(Optional) Display all the routes advertised to this peer

received-routes

(Optional) Display all the routes received from this peer

flap-statistics

(Optional) Display flap statistics for routes received from this peer

paths

(Optional) Display AS paths learned from this peer

Command Mode

- /exec

show ip mbgp nexthop-database

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } nexthop-database [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

nexthop-database

Display nexthop database

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

Command Mode

- /exec

show ip mbgp nexthop

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 { unicast | multicast } ] } nexthop <ipnexthop> [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

nexthop

Display routes matching the nexthop

ipnexthop

Nexthop address

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

Command Mode

- /exec

show ip mbgp prefix-list

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 { unicast | multicast } ] } } prefix-list { <prfxlist-name> | <test_pol_name> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

prefix-list

Display routes matching the prefix-list

prfxlist-name

Name of prefix-list

test_pol_name

An existing test-list policy

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

Command Mode

- /exec

show ip mbgp received-paths

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } received-paths [ private ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

received-paths

Display paths stored for soft-reconfig

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

private

(Optional) private

Command Mode

- /exec

show ip mroute

show ip mroute [ [ [ bitfield ] [ detail ] ] | sr | rp | [ summary [ count | software-forwarded | rpf-failed ] ] | { [ [ <source> <group> ] | [ <group> [ <source> ] ] ] [ shared-tree | source-tree | mofrr ] [ [ flags ] | [ detail ] | [ bitfield ] | [ summary [ software-forwarded | rpf-failed ] ] ] } ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> [ <expry_timer> ] [ <route_count> ] [ <star_g_cnt> ] [ <sg_cnt> ] [ <star_g_prfx_cnt> ] [ TABLE_route_summary [ <total-num-routes> ] [ <star-g-route> ] [ <sg-route> ] [ <star-g-prfx> ] [ <group-count> ] [ <avg> ] [ <rem> ] [ <stats-pndg> ] ] [ TABLE_summary_source [ <group_addr> ] [ <group_mask_len> ] [ <source_count> ] [ TABLE_one_sg [ <source_addr> ] [ <packets> ] [ <bytes> ] [ <aps> ] [ <pps> ] [ <rate_buf> ] [ <oifs> ] [ <software_fwd> ] [ <rpf-failed-pkts> ] [ <rpf-failed-bytes> ] ] ] [ TABLE_one_route <mcast-addrs> [ <source_addrs> <group_addrs> ] [ <pending> ] [ <bidir> ] [ <uptime> ] [ <mofrr> ] [ TABLE_mpib [ <mpib-name> ] [ <oif-count> ] [ <stale-route> ] ] [ <mdt-encap-index> ] [ <stats-pkts> ] [ <stats-bytes> ] [ <stats-rate-buf> ] [ <lisp-src-rloc> ] [ <translated-route-src> ] [ <translated-route-grp> ] [ <route-iif> ] [ <rpf-nbr> ] [ <mofrr-iif> ] [ <mofrr-nbr> ] [ <internal> ] [ <oif-count> ] [ <fabric-oif> ] [ <fabric-loser> ] [ <num-vpc-svi-oifs> ] [ TABLE_oif [ <oif-name> ] [ <oif-uptime> ] [ TABLE_oif_mpib [ <oif-mpib-name> ] [ <stale-oif> ] [ <omd-vpc-svi> ] ] [ <rpf> ] ] [ <route-mdt-iod> ] [ <oif-list-bitfield> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

mroute

Display IP multicast routing table

summary

(Optional) Display route counts and packet rates

shared-tree

(Optional) Display route for *,G entries

source-tree

(Optional) Display route for S,G entries

software-forwarded

(Optional) Display software switched route counts only

rpf-failed

(Optional) Display RPF failure statistics

rp

(Optional) Display RP routes (RP, 0.0.0.0/32)

sr

(Optional) Display Service Reflect Routes only

mofrr

(Optional) Display mofrr routes

group

(Optional) Display multicast group/source address for route

source

(Optional) Display multicast group/source address for route

count

(Optional) Display route counts only

bitfield

(Optional) Display bitfield details

detail

(Optional) Display detailed route attributes

flags

(Optional) Display detailed route attributes

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

expry_timer

(Optional)

route_count

(Optional)

star_g_cnt

(Optional)

sg_cnt

(Optional)

star_g_prfx_cnt

(Optional)

TABLE_summary_source

(Optional)

group_addr

(Optional)

group_mask_len

(Optional)

source_count

(Optional)

TABLE_one_sg

(Optional)

source_addr

(Optional)

packets

(Optional)

bytes

(Optional)

aps

(Optional)

pps

(Optional)

rate_buf

(Optional)

oifs

(Optional)

software_fwd

(Optional)

rpf-failed-pkts

(Optional)

rpf-failed-bytes

(Optional)

TABLE_one_route

(Optional)

mcast-addrs

(Optional)

source_addrs

(Optional)

group_addrs

(Optional)

bidir

(Optional)

pending

(Optional)

mofrr

(Optional)

uptime

(Optional)

TABLE_mpib

(Optional)

mpib-name

(Optional)

oif-count

(Optional)

stale-route

(Optional)

mdt-encap-index

(Optional)

stats-pkts

(Optional)

stats-bytes

(Optional)

stats-rate-buf

(Optional)

lisp-src-rloc

(Optional)

translated-route-src

(Optional)

translated-route-grp

(Optional)

route-iif

(Optional)

rpf-nbr

(Optional)

mofrr-iif

(Optional)

mofrr-nbr

(Optional)

internal

(Optional)

oif-count

(Optional)

fabric-oif

(Optional)

fabric-loser

(Optional)

num-vpc-svi-oifs

(Optional)

TABLE_oif

(Optional)

oif-name

(Optional)

oif-uptime

(Optional)

TABLE_oif_mpib

(Optional)

oif-mpib-name

(Optional)

stale-oif

(Optional)

omd-vpc-svi

(Optional)

rpf

(Optional)

route-mdt-iod

(Optional)

oif-list-bitfield

(Optional)

TABLE_route_summary

(Optional)

total-num-routes

(Optional)

star-g-route

(Optional)

sg-route

(Optional)

star-g-prfx

(Optional)

group-count

(Optional)

avg

(Optional)

rem

(Optional)

stats-pndg

(Optional)

Command Mode

- /exec

show ip msdp count

show ip msdp count [ <asn> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> <total-cnt> [ TABLE_asn <out-asn> <src-cnt> <grp-cnt> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

count

Display SA cache counters

asn

(Optional) AS number

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

total-cnt

(Optional)

TABLE_asn

(Optional)

out-asn

(Optional)

src-cnt

(Optional)

grp-cnt

(Optional)

Command Mode

- /exec

show ip msdp event-history

show ip msdp [ <asn> ] [ internal ] event-history { errors | msgs | <msdp-event-hist-buf-name> | statistics }

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

asn

(Optional) AS number

internal

(Optional) Commands for internal use

event-history

Show various event logs of MSDP

errors

Error logs of MSDP

msgs

Message logs of MSDP

msdp-event-hist-buf-name

Buffer

statistics

Buffer state

Command Mode

- /exec

show ip msdp mesh-group

show ip msdp mesh-group [ <mesh-group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> [ TABLE_meshgroup [ <meshgroup-name> ] [ TABLE_peer [ <peer-ipaddr> ] [ <peer-asn> ] [ <peer-description> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

mesh-group

Display members of mesh-group

mesh-group

(Optional) Display single mesh-group

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

TABLE_meshgroup

(Optional)

meshgroup-name

(Optional)

TABLE_peer

(Optional)

peer-ipaddr

(Optional)

peer-asn

(Optional)

peer-description

(Optional)

Command Mode

- /exec

show ip msdp peer

show ip msdp peer [ <peer-address> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_peer [ <peer-ipaddr> ] [ <out-vrf> ] [ <peer-asn> ] [ <local-ipaddr> ] [ <local-iface> ] [ <fully-configured> ] [ <peer-description> ] [ <connection-status> ] [ <peer-listening> ] [ <state-duration> ] [ <peer-uptime> ] [ <peer-rr> ] [ <peer-password> ] [ <peer-ki> ] [ <peer-kt> ] [ <peer-ri> ] [ <sa-in-policy> ] [ <sa-out-policy> ] [ <sa-limit> ] [ <mesh-name> ] [ <last-rcvd> ] [ <sa-rcvd> ] [ <sa-sent> ] [ <sa-req-rcvd> ] [ <sa-req-sent> ] [ <sa-resp-rcvd> ] [ <sa-resp-sent> ] [ <in-ctrl-msgs> ] [ <out-ctrl-msgs> ] [ <in-data-msgs> ] [ <out-data-msgs> ] [ <sa-ka-rcvd> ] [ <sa-ka-sent> ] [ <sa-notif-rcvd> ] [ <sa-notif-sent> ] [ <rem-port> ] [ <local-port> ] [ <rpf-failures> ] [ <cache-lifetime> ] [ <estb-transitions> ] [ <conn-attempts> ] [ <discont-time> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

peer

Display MSDP peer information

peer-address

(Optional) IP address of MSDP peer

__readonly__

(Optional)

TABLE_peer

(Optional)

peer-ipaddr

(Optional)

out-vrf

(Optional)

peer-asn

(Optional)

local-ipaddr

(Optional)

local-iface

(Optional)

fully-configured

(Optional)

peer-description

(Optional)

connection-status

(Optional)

state-duration

(Optional)

peer-listening

(Optional)

peer-uptime

(Optional)

peer-password

(Optional)

peer-ki

(Optional)

peer-kt

(Optional)

peer-ri

(Optional)

peer-rr

(Optional)

sa-in-policy

(Optional)

sa-out-policy

(Optional)

sa-limit

(Optional)

mesh-name

(Optional)

last-rcvd

(Optional)

sa-rcvd

(Optional)

sa-sent

(Optional)

sa-req-rcvd

(Optional)

sa-req-sent

(Optional)

sa-resp-rcvd

(Optional)

sa-resp-sent

(Optional)

out-ctrl-msgs

(Optional)

in-ctrl-msgs

(Optional)

out-data-msgs

(Optional)

in-data-msgs

(Optional)

sa-ka-rcvd

(Optional)

sa-ka-sent

(Optional)

sa-notif-rcvd

(Optional)

sa-notif-sent

(Optional)

rem-port

(Optional)

local-port

(Optional)

rpf-failures

(Optional)

cache-lifetime

(Optional)

estb-transitions

(Optional)

conn-attempts

(Optional)

discont-time

(Optional)

Command Mode

- /exec

show ip msdp policy statistics sa-policy in

show ip msdp policy statistics sa-policy <peer-address> { in | out } [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ TABLE_routemap [ <name> ] [ <action> ] [ <seq_num> ] [ [ TABLE_cmd [ <command> ] [ <match_count> ] [ <compare_count> ] ] ] ] [ <total_accept_count> ] [ <total_reject_count> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

MSDP global configuration commands

policy

Policy information

statistics

Policy statistics

sa-policy

Configureed SA policy for MSDP peer

peer-address

IP address of MSDP peer for SA policy

in

Input policy

out

Output policy

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_routemap

(Optional)

name

(Optional)

action

(Optional)

seq_num

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

compare_count

(Optional)

match_count

(Optional)

total_accept_count

(Optional)

total_reject_count

(Optional)

Command Mode

- /exec

show ip msdp rpf

show ip msdp rpf <rp-address> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-rp-address> <out-vrf> [ TABLE_mesh [ <peer-addr> ] [ <mesh-name> ] ] [ <is-peer-cnt-one> ] [ <is-rp-peer> ] [ <is-bgp-alive> ] [ <bgp-peer-addr> ] [ <peer-asn> ] [ <origin-asn> ] [ <is-mbgp> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

rpf

Display RPF-peer for RP address

rp-address

IP address of RP

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-rp-address

(Optional)

out-vrf

(Optional)

TABLE_mesh

(Optional)

peer-addr

(Optional)

mesh-name

(Optional)

is-peer-cnt-one

(Optional)

is-rp-peer

(Optional)

is-bgp-alive

(Optional)

bgp-peer-addr

(Optional)

peer-asn

(Optional)

origin-asn

(Optional)

is-mbgp

(Optional)

Command Mode

- /exec

show ip msdp sa

show ip msdp { sa-cache | route } [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ <asn> ] [ peer <peer> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-vrf> ] [ <total-sa-count> ] [ TABLE_sa [ <src-addr> ] [ <grp-addr> ] [ <rp-addr> ] [ <out-asn> ] [ <peer-addr> ] [ <uptime> ] [ <expire> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Display MSDP SA route cache

sa-cache

Display MSDP SA route cache

source

(Optional) Display group/source address for SA

group

(Optional) Display group/source address for SA

asn

(Optional) AS number

detail

(Optional) Display detailed information

peer

(Optional) Display MSDP SA received from single peer

peer

(Optional) IP address of peer for SA

__readonly__

(Optional)

out-vrf

(Optional)

total-sa-count

(Optional)

TABLE_sa

(Optional)

src-addr

(Optional)

grp-addr

(Optional)

rp-addr

(Optional)

peer-addr

(Optional)

out-asn

(Optional)

uptime

(Optional)

expire

(Optional)

Command Mode

- /exec

show ip msdp sources

show ip msdp sources [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-vrf> ] [ TABLE_source [ <source-addr> ] [ <is-count-ge-limit> ] [ <count> ] [ <is-limit-valid> ] [ <limit> ] [ <source-prefix> ] [ <violates> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

sources

Display learned sources with their group counts and limits

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

TABLE_source

(Optional)

source-addr

(Optional)

is-count-ge-limit

(Optional)

count

(Optional)

is-limit-valid

(Optional)

limit

(Optional)

source-prefix

(Optional)

violates

(Optional)

Command Mode

- /exec

show ip msdp statistics

show ip msdp statistics [ <peer-address> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> <select-err> <recv-sel-err> { TABLE_peer <peer-address> <buffer-full> <recv-buf-full> <fatal-err> <recv-fat-err> <would-block> <recv-would-block> <sock-exp> <invalid-type> <invalid-len> } ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

statistics

Display internal statistics

peer-address

(Optional) IP address of MSDP peer

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

select-err

(Optional)

recv-sel-err

(Optional)

TABLE_peer

(Optional)

peer-address

(Optional)

buffer-full

(Optional)

recv-buf-full

(Optional)

fatal-err

(Optional)

recv-fat-err

(Optional)

would-block

(Optional)

recv-would-block

(Optional)

sock-exp

(Optional)

invalid-type

(Optional)

invalid-len

(Optional)

Command Mode

- /exec

show ip msdp summary

show ip msdp summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-vrf> ] [ <local-asn> ] [ <originator-id> ] [ <config-peer-count> ] [ <estb-peer-count> ] [ <shut-peer-count> ] [ TABLE_peer [ <peer-address> ] [ <peer-asn> ] [ <peer-state> ] [ <peer-uptime> ] [ <peer-last-msg> ] [ <peer-sa-rcvd> ] [ <peer-sa-limit> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

summary

Display MSDP peer summary

__readonly__

(Optional)

out-vrf

(Optional)

local-asn

(Optional)

originator-id

(Optional)

config-peer-count

(Optional)

estb-peer-count

(Optional)

shut-peer-count

(Optional)

TABLE_peer

(Optional)

peer-address

(Optional)

peer-asn

(Optional)

peer-state

(Optional)

peer-uptime

(Optional)

peer-last-msg

(Optional)

peer-sa-rcvd

(Optional)

peer-sa-limit

(Optional)

Command Mode

- /exec

show ip multicast vrf

show ip multicast vrf [ <vrf-name> | <vrf-known-name> | all ] [ detail ] [ __readonly__ <vrf-count> { TABLE_vrf <vrf-name> <cid> <tid> <rc> <gc> <sc> <star_gc> <state> } ]

Syntax Description

show

Show running system information

ip

Display IP information

multicast

Display multicast routing info

vrf

Display information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-count

(Optional)

cid

(Optional)

tid

(Optional)

rc

(Optional)

gc

(Optional)

sc

(Optional)

star_gc

(Optional)

state

(Optional)

Command Mode

- /exec

show ip nat-alias

show ip nat-alias

Syntax Description

show

Show running system information

ip

Display IP information

nat-alias

Display aliases registered by NAT module

Command Mode

- /exec

show ip nat max

show ip nat max [ __readonly__ <max_dyn_translations> <max_all_host> <static_translations> <dynamic_translations> <icmp_translations> ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

nat

IP NAT information

max

IP NAT max values

__readonly__

(Optional)

max_dyn_translations

(Optional) Max Dynamic Translations

max_all_host

(Optional) Max All Hosts

static_translations

(Optional) No. Static Translations

dynamic_translations

(Optional) No. Dynamic Translations

icmp_translations

(Optional) No. ICMP Translations

Command Mode

- /exec

show ip nat statistics

show ip nat statistics [ __readonly__ <last_clear_time> <total_active_translations> <static_translations> <dynamic_translations> <icmp_translations> <total_exp_translations> <syn_exp_translations> <finrst_exp_translations> <inactive_exp_translations> <total_hits> <total_misses> <io_hits> <io_misses> <oi_hits> <oi_misses> <total_sw_translated> <io_sw_translated> <oi_sw_translated> <total_sw_dropped> <io_sw_dropped> <oi_sw_dropped> <addr_alloc_fail_drop> <port_alloc_fail_drop> <dyn_trans_maxlimit_drop> <icmp_maxlimit_drop> <allhost_maxlimit_drop> <total_tcp_session_created> <total_tcp_session_closed> [ <Total_NAT_inside_interfaces> ] [ { TABLE_NAT_inside_interfaces [ <nat_inside_interfaces> ] } ] [ <Total_NAT_outside_interfaces> ] [ { TABLE_NAT_outside_interfaces [ <nat_outside_interfaces> ] } ] [ { TABLE_NAT_inside_source_list [ <nat_in_acl_name> ] [ <nat_in_acl_refcount> ] [ <nat_in_pool_name> ] [ <nat_pool_overload> ] [ <in_pool_total_address> ] [ <in_pool_allocated> ] [ <in_pool_missed> ] [ <interface_name> ] [ <interface_status> ] [ <interface_ip_addr> ] } ] [ { TABLE_NAT_outside_source_list [ <nat_out_acl_name> ] [ <nat_out_acl_refcount> ] [ <nat_out_pool_name> ] [ <out_pool_total_address> ] [ <out_pool_allocated> ] [ <out_pool_missed> ] } ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

nat

IP NAT information

statistics

Translation statistics

__readonly__

(Optional)

last_clear_time

(Optional) Clearable stats collected from

total_active_translations

(Optional) Total active translations

static_translations

(Optional) No. Static Translations

dynamic_translations

(Optional) No. Dynamic Translations

icmp_translations

(Optional) No. ICMP Translations

total_exp_translations

(Optional) Total expired Translations

syn_exp_translations

(Optional) SYN timer expired Translations

finrst_exp_translations

(Optional) FIN-RST timer expired Translations

inactive_exp_translations

(Optional) Inactive timer expired Translations

total_hits

(Optional) Total Hits

total_misses

(Optional) Total Misses

io_hits

(Optional) In-Out Hits

io_misses

(Optional) In-Out Misses

oi_hits

(Optional) Out-In Hits

oi_misses

(Optional) Out-In Misses

total_sw_translated

(Optional) Total SW Translated Packets

io_sw_translated

(Optional) In-Out SW Translated Packets

oi_sw_translated

(Optional) Out-In SW Translated Packets

total_sw_dropped

(Optional) Total SW Dropped Packets

io_sw_dropped

(Optional) In-Out SW Dropped Packets

oi_sw_dropped

(Optional) Out-In SW Dropped Packets

addr_alloc_fail_drop

(Optional) Address alloc. failure dropped Packets

port_alloc_fail_drop

(Optional) Port alloc. failure dropped Packets

dyn_trans_maxlimit_drop

(Optional) Dyn. Translation max limit dropped Packets

icmp_maxlimit_drop

(Optional) ICMP max limit dropped Packets

allhost_maxlimit_drop

(Optional) Allhost max limit dropped Packets

total_tcp_session_created

(Optional) Total tcp session created

total_tcp_session_closed

(Optional) Total tcp session closed

Total_NAT_inside_interfaces

(Optional) Number of NAT inside interfaces

TABLE_NAT_inside_interfaces

(Optional) NAT inside interfaces

nat_inside_interfaces

(Optional) NAT Inside Interfaces

Total_NAT_outside_interfaces

(Optional) Number of NAT outside interfaces

TABLE_NAT_outside_interfaces

(Optional) NAT outside interfaces

nat_outside_interfaces

(Optional) NAT Outside Interfaces

TABLE_NAT_inside_source_list

(Optional) NAT Inside source list

TABLE_NAT_outside_source_list

(Optional) NAT Outside source list

nat_in_acl_name

(Optional) NAT inside access list name

nat_out_acl_name

(Optional) NAT outside access list name

nat_in_acl_refcount

(Optional) NAT inside access list ref. count

nat_out_acl_refcount

(Optional) NAT outside access list ref. count

nat_in_pool_name

(Optional) NAT inside Pool name

nat_out_pool_name

(Optional) NAT outside Pool name

nat_pool_overload

(Optional) NAT Pool overload

in_pool_total_address

(Optional) Total address in the inside pool

out_pool_total_address

(Optional) Total address in the outside pool

in_pool_allocated

(Optional) Total address allocated in the inside pool

out_pool_allocated

(Optional) Total address allocated in the outside pool

in_pool_missed

(Optional) Total failed address allocation in the inside pool

out_pool_missed

(Optional) Total failed address allocation in the outside pool

interface_name

(Optional) NAT source list interface name

interface_status

(Optional) NAT source list interface status

interface_ip_addr

(Optional) NAT source list interface addr

Command Mode

- /exec

show ip nat timeout

show ip nat timeout [ __readonly__ <tcp_timeout> <udp_timeout> [ <icmp_timeout> ] <dynamic_timeout> [ <sampling_timeout> ] [ <syn_timeout> ] [ <finrst_timeout> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

nat

IP NAT information

timeout

IP NAT timeout values

__readonly__

(Optional)

tcp_timeout

(Optional) TCP Timeout

udp_timeout

(Optional) UDP Timeout

icmp_timeout

(Optional) ICMP Timeout

dynamic_timeout

(Optional) Dynamic Timeout

sampling_timeout

(Optional) Sampling Timeout

syn_timeout

(Optional) SYN Timeout

finrst_timeout

(Optional) FINRST Timeout

Command Mode

- /exec

show ip nat translations

show ip nat translations [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ verbose ] [ internal-detail ] [ __readonly__ { TABLE_nat_translation [ <Protocol> ] [ <Inside_global_IP_V4_Address> ] [ <Inside_global_port> ] [ <Inside_local_IP_V4_Address> ] [ <Inside_local_port> ] [ <Outside_local_IP_V4_Address> ] [ <Outside_local_port> ] [ <Outside_global_IP_V4_Address> ] [ <Outside_global_port> ] [ <VRF> ] [ <In_stats_count> ] [ <Out_stats_count> ] [ <Group_id> ] [ <Time_left> ] [ <Syn> ] [ <Fin_rst> ] [ <Flags> ] [ <Entry_id> ] [ <State> ] } ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

nat

IP NAT information

translations

Translation entries

verbose

(Optional) Show extra information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all vrfs

internal-detail

(Optional) Display internal debugs

__readonly__

(Optional) Readonly

TABLE_nat_translation

(Optional) NAT Translation Table

Protocol

(Optional) Protocol

Inside_global_IP_V4_Address

(Optional) Inside global address

Inside_global_port

(Optional) Inside global port

Inside_local_IP_V4_Address

(Optional) Inside local address

Inside_local_port

(Optional) Inside local port

Outside_local_IP_V4_Address

(Optional) Outside local address

Outside_local_port

(Optional) Outside local port

Outside_global_IP_V4_Address

(Optional) Outside global address

Outside_global_port

(Optional) Outside global port

Flags

(Optional) Flags

In_stats_count

(Optional) In stats count

Out_stats_count

(Optional) Out stats count

Entry_id

(Optional) Entry ID

State

(Optional) State

Group_id

(Optional) Group ID

VRF

(Optional) VRF

Time_left

(Optional) Time Left (HH:MM:SS)

Syn

(Optional) Syn

Fin_rst

(Optional) FIN RESET

Command Mode

- /exec

show ip ospf

show ip ospf [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <instance_number> <cname> <rid> [ <domain_tag> ] [ <dn_bit_ignore> ] <stateful_ha> <gr_ha> [ <gr_planned_only> ] [ <gr_notify_period> ] [ <gr_grace_period> ] [ <gr_state> ] [ <gr_last_status> ] [ <gr_helper_mode> ] <support_tos0_only> <support_opaque_lsa> [ <low_mem_cond> ] <is_abr> <is_asbr> [ <max_lsa_non_self_number> ] [ <max_lsa_state> ] [ <max_lsa_warning_only> ] [ <max_lsa_current_non_self_lsa_number> ] [ <max_lsa_threshold_pct> ] [ <max_lsa_ignore_time> ] [ <max_lsa_reset_time> ] [ <max_lsa_ignore_count> ] [ <max_lsa_current_ignore_count> ] [ <max_lsa_ignore_time_left> ] [ <max_lsa_reset_time_left> ] [ <max_lsa_permanent_ignore> ] [ { TABLE_redist <proto> [ <max_lsas> ] [ <warning> ] [ <threshold> ] [ <current_count> ] } ] <admin_dist> <ref_bw> <spf_start_time> <spf_hold_time> <spf_max_time> <lsa_start_time> <lsa_hold_time> <lsa_max_time> <min_lsa_arr_time> <lsa_aging_pace> <spf_max_paths> <max_metric_adver> [ [ <max_metric_time_left> ] [ <max_metric_wait_bgp> ] [ <max_metric_timeout> ] [ <max_metric_always> ] [ <max_metric_sum_lsa> ] [ <max_metric_ext_lsa> ] ] <asext_lsa_cnt> <asext_lsa_crc> <asopaque_lsa_cnt> <asopaque_lsa_crc> <area_total> <area_normal> <area_stub> <area_nssa> <act_area_total> <act_area_normal> <act_area_stub> <act_area_nssa> <no_discard_rt_ext> <no_discard_rt_int> [ <bfd_enabled> ] [ <passive_dflt> ] [ <name_lookup> ] [ <segrt_configured> ] [ <segrt_enabled> ] [ { <srgb_min_label> <srgb_max_label> } ] [ { TABLE_area <aname> [ <backbone_active> ] [ <active> ] <age> <total_intf> <act_intf> <passive_intf> <loopback_intf> [ <gr_nbr_cnt> ] <stub> [ <stub_def_cost> ] <nssa> [ <no_redist> ] [ <nssa_trans> ] <no_summary> <auth_type> [ { <area_segrt_configured> | <area_segrt_disabled_by_config> } ] [ <area_segrt_enabled> ] <spf_runs> <last_spf_run_time> [ <rtr_lsa_throt> ] [ TABLE_range <addr> <masklen> <state> <nets> <advertise> [ <cost> ] ] [ <filter_in> ] [ <filter_out> ] <lsa_cnt> <lsa_crc> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

instance_number

(Optional)

cname

(Optional)

rid

(Optional)

domain_tag

(Optional)

dn_bit_ignore

(Optional)

stateful_ha

(Optional)

gr_ha

(Optional)

gr_planned_only

(Optional)

gr_notify_period

(Optional)

gr_grace_period

(Optional)

gr_state

(Optional)

gr_last_status

(Optional)

gr_helper_mode

(Optional)

support_tos0_only

(Optional)

support_opaque_lsa

(Optional)

low_mem_cond

(Optional)

is_abr

(Optional)

is_asbr

(Optional)

max_lsa_non_self_number

(Optional)

max_lsa_state

(Optional)

max_lsa_warning_only

(Optional)

max_lsa_current_non_self_lsa_number

(Optional)

max_lsa_threshold_pct

(Optional)

max_lsa_ignore_time

(Optional)

max_lsa_reset_time

(Optional)

max_lsa_ignore_count

(Optional)

max_lsa_current_ignore_count

(Optional)

max_lsa_ignore_time_left

(Optional)

max_lsa_reset_time_left

(Optional)

max_lsa_permanent_ignore

(Optional)

TABLE_redist

(Optional)

proto

(Optional)

max_lsas

(Optional)

warning

(Optional)

threshold

(Optional)

current_count

(Optional)

admin_dist

(Optional)

ref_bw

(Optional)

spf_start_time

(Optional)

spf_hold_time

(Optional)

spf_max_time

(Optional)

lsa_start_time

(Optional)

lsa_hold_time

(Optional)

lsa_max_time

(Optional)

min_lsa_arr_time

(Optional)

lsa_aging_pace

(Optional)

spf_max_paths

(Optional)

max_metric_adver

(Optional)

max_metric_time_left

(Optional)

max_metric_wait_bgp

(Optional)

max_metric_timeout

(Optional)

max_metric_always

(Optional)

max_metric_sum_lsa

(Optional)

max_metric_ext_lsa

(Optional)

asext_lsa_cnt

(Optional)

asext_lsa_crc

(Optional)

asopaque_lsa_cnt

(Optional)

asopaque_lsa_crc

(Optional)

area_total

(Optional)

area_normal

(Optional)

area_stub

(Optional)

area_nssa

(Optional)

act_area_total

(Optional)

act_area_normal

(Optional)

act_area_stub

(Optional)

act_area_nssa

(Optional)

bfd_enabled

(Optional)

name_lookup

(Optional)

passive_dflt

(Optional)

no_discard_rt_ext

(Optional)

no_discard_rt_int

(Optional)

segrt_configured

(Optional)

segrt_enabled

(Optional)

srgb_min_label

(Optional)

srgb_max_label

(Optional)

TABLE_area

(Optional)

aname

(Optional)

backbone_active

(Optional)

active

(Optional)

age

(Optional)

total_intf

(Optional)

act_intf

(Optional)

passive_intf

(Optional)

loopback_intf

(Optional)

gr_nbr_cnt

(Optional)

stub

(Optional)

stub_def_cost

(Optional)

nssa

(Optional)

no_redist

(Optional)

nssa_trans

(Optional)

no_summary

(Optional)

auth_type

(Optional)

area_segrt_configured

(Optional)

area_segrt_disabled_by_config

(Optional)

area_segrt_enabled

(Optional)

spf_runs

(Optional)

last_spf_run_time

(Optional)

rtr_lsa_throt

(Optional)

TABLE_range

(Optional)

addr

(Optional)

masklen

(Optional)

state

(Optional)

nets

(Optional)

advertise

(Optional)

cost

(Optional)

filter_in

(Optional)

filter_out

(Optional)

lsa_cnt

(Optional)

lsa_crc

(Optional)

Command Mode

- /exec

show ip ospf border-routers

show ip ospf [ <tag> ] border-routers [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_br <type> <addr> <cost> <asbr> <abr> <area> <spf_inst> [ <vlink_unresolved> ] [ TABLE_br_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] ] [ TABLE_br_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

border-routers

Border routers

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_br

(Optional)

type

(Optional)

addr

(Optional)

cost

(Optional)

asbr

(Optional)

abr

(Optional)

area

(Optional)

spf_inst

(Optional)

vlink_unresolved

(Optional)

TABLE_br_ubest_nh

(Optional)

ubest_nh_addr

(Optional)

ubest_nh_intf

(Optional)

TABLE_br_mbest_nh

(Optional)

mbest_nh_addr

(Optional)

mbest_nh_intf

(Optional)

Command Mode

- /exec

show ip ospf database

show ip ospf [ <tag> ] database [ [ [ [ network | asbr-summary | summary | router | opaque-link | opaque-area [ type { router-information | ext-prefix | ext-link } ] | nssa-external ] [ area <area-id-ip> ] ] | external [ ext_tag <tag_val> ] | opaque-as ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db2_lsa <name> [ <area> ] <id> <advrtr> <age> <seqno> <cksum> [ <opaque_id> ] [ <prefix> ] [ <prefix_mask> ] [ <srgb_base> ] [ <srgb_range> ] [ <corrupt> ] [ <rtr_num_links> ] [ <tag> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

network

(Optional) Display network LSAs

asbr-summary

(Optional) Display type 4 (asbr-summary) LSAs

external

(Optional) Display type 5 (external) LSAs

router

(Optional) Display router LSAs

nssa-external

(Optional) Display type 7 (NSSA external) LSAs

opaque-link

(Optional) Display Opaque Link-Local LSAs

opaque-area

(Optional) Display Opaque Area LSAs

opaque-as

(Optional) Display Opaque AS LSAs

summary

(Optional) Display type 3 (network-summary) LSAs

self-originated

(Optional) Display only self-originated LSAs

lsid

(Optional) Restrict display by link state ID

adv-router

(Optional) Restrict display by Advertising router

advid

(Optional) Advertising router ID

adv-router-name

(Optional) Restrict display by Advertising router name

adv-name

(Optional) DNS Name of the Advertising router

area

(Optional) Display only LSA's in this area

area-id-ip

(Optional) Area Id as an integer or ip address

ext_tag

(Optional) Restrict display by tag

tag_val

(Optional) 32-bit tag value

type

(Optional) Opaque type

router-information

(Optional) Router Information (RI) Opaque LSA

ext-prefix

(Optional) Extended Prefix Opaque LSA

ext-link

(Optional) Extended Link Opaque LSA

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_db2_lsa

(Optional)

name

(Optional)

area

(Optional)

id

(Optional)

advrtr

(Optional)

age

(Optional)

seqno

(Optional)

cksum

(Optional)

opaque_id

(Optional)

prefix

(Optional)

prefix_mask

(Optional)

srgb_base

(Optional)

srgb_range

(Optional)

corrupt

(Optional)

rtr_num_links

(Optional)

Command Mode

- /exec

show ip ospf database database-summary

show ip ospf [ <tag> ] database database-summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_dbsum [ TABLE_dbsum_area <area> [ TABLE_dbsum_area_lsa <area_lsa_name> <area_lsa_count> ] <area_lsa_total> ] [ TABLE_dbsum_all [ TABLE_dbsum_lsa_all <lsa_name> <lsa_count> ] <non_self_lsa_total> <lsa_total> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

database-summary

Summary of database

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_dbsum

(Optional)

TABLE_dbsum_area

(Optional)

area

(Optional)

TABLE_dbsum_area_lsa

(Optional)

area_lsa_name

(Optional)

area_lsa_count

(Optional)

area_lsa_total

(Optional)

TABLE_dbsum_all

(Optional)

TABLE_dbsum_lsa_all

(Optional)

lsa_name

(Optional)

lsa_count

(Optional)

non_self_lsa_total

(Optional)

lsa_total

(Optional)

Command Mode

- /exec

show ip ospf database detail

show ip ospf [ <tag> ] database [ [ [ network | asbr-summary | summary | router | opaque-link | opaque-area [ type { router-information | ext-prefix | ext-link } ] | nssa-external ] [ area <area-id-ip> ] ] | external [ ext_tag <tag_val> ] | opaque-as ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] detail [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db2_lsa <name> [ <area> ] [ <rtr_max_metric> ] [ TABLE_lsdb <age> <maxage> <options> <options_str> <wrapping> <dummy> <flush_pending> <type> <id> <id_str> [ <opaque_type> ] [ <opaque_type_str> ] [ <opaque_id> ] [ <prefix> ] [ <prefix_mask> ] [ <srgb_base> ] [ <srgb_range> ] <advrtr> <seqno> <cksum> <len> [ <corrupt> ] [ <rtr_abr> ] [ <rtr_asbr> ] [ <rtr_translate> ] [ <rtr_vlink_end> ] [ <rtr_num_links> ] [ <rtr_links_mismatch> ] [ TABLE_rlsa [ <rtr_link_type> ] [ <rtr_link_id_str> ] [ <rtr_link_id> ] [ <rtr_link_data_str> ] [ <rtr_link_data> ] [ <rtr_link_num_tos> ] [ <rtr_link_metric> ] [ TABLE_rlinktos [ <rtr_link_tos_id> ] [ <rtr_link_tos_metric> ] ] ] [ <net_mask> ] [ TABLE_netlsa [ <net_rtr> ] ] [ <sum_mask> ] [ <sum_metric> ] [ TABLE_sumlsa [ <sum_tos_id> ] [ <sum_tos_metric> ] ] [ <nssa_mask> ] [ <nssa_metric_type2> ] [ <nssa_metric> ] [ <nssa_fwd_addr> ] [ <nssa_tag> ] [ TABLE_nssa [ <nssa_tos_metric_type2> ] [ <nssa_tos_id> ] [ <nssa_tos_metric> ] [ <nssa_tos_fwd_addr> ] [ <nssa_tos_tag> ] ] [ <asext_mask> ] [ <asext_metric_type2> ] [ <asext_metric> ] [ <asext_fwd_addr> ] [ <asext_tag> ] [ TABLE_asext [ <asext_tos_metric_type2> ] [ <asext_tos_id> <asext_tos_metric> ] [ <asext_tos_fwd_addr> ] [ <asext_tos_tag> ] ] [ <opaque_link_intf> ] [ <opaque_unknown> ] [ <opaque_data_len> ] [ <opaque_data> ] [ <opaque_corrupt> ] [ <tlv_type> ] [ <tlv_len> ] [ <tlv_data> ] [ <tlv_unknown> ] [ <gr_interval> ] [ <gr_reason> ] [ <gr_addr> ] [ <te_frag_id> ] [ <te_rtr_id> ] [ <te_link_type> ] [ <te_link_id> ] [ <te_link_metric> ] [ <te_link_max_bw> ] [ <te_link_rsv_bw> ] [ <te_link_unrsv_bw> ] [ <te_link_admin> ] [ <te_num_links> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

network

(Optional) Display network LSAs

asbr-summary

(Optional) Display type 4 (asbr-summary) LSAs

external

(Optional) Display type 5 (external) LSAs

router

(Optional) Display router LSAs

nssa-external

(Optional) Display type 7 (NSSA external) LSAs

opaque-link

(Optional) Display Opaque Link-Local LSAs

opaque-area

(Optional) Display Opaque Area LSAs

opaque-as

(Optional) Display Opaque AS LSAs

summary

(Optional) Display type 3 (network-summary) LSAs

self-originated

(Optional) Display only self-originated LSAs

lsid

(Optional) Restrict display by link state ID

adv-router

(Optional) Restrict display by Advertising router

advid

(Optional) Advertising router ID

adv-router-name

(Optional) Restrict display by Advertising router name

adv-name

(Optional) DNS Name of the Advertising router

area

(Optional) Display only LSA's in this area

area-id-ip

(Optional) Area Id as an integer or ip address

ext_tag

(Optional) Restrict display by tag

tag_val

(Optional) 32-bit tag value

type

(Optional) Opaque type

router-information

(Optional) Router Information (RI) Opaque LSA

ext-prefix

(Optional) Extended Prefix Opaque LSA

ext-link

(Optional) Extended Link Opaque LSA

detail

Display LSA in detail

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_db2_lsa

(Optional)

name

(Optional)

area

(Optional)

rtr_max_metric

(Optional)

TABLE_lsdb

(Optional)

age

(Optional)

maxage

(Optional)

options

(Optional)

options_str

(Optional)

wrapping

(Optional)

dummy

(Optional)

flush_pending

(Optional)

type

(Optional)

id

(Optional)

id_str

(Optional)

opaque_type

(Optional)

opaque_type_str

(Optional)

opaque_id

(Optional)

prefix

(Optional)

prefix_mask

(Optional)

srgb_base

(Optional)

srgb_range

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

len

(Optional)

corrupt

(Optional)

rtr_abr

(Optional)

rtr_asbr

(Optional)

rtr_translate

(Optional)

rtr_vlink_end

(Optional)

rtr_num_links

(Optional)

rtr_links_mismatch

(Optional)

TABLE_rlsa

(Optional)

rtr_link_type

(Optional)

rtr_link_id_str

(Optional)

rtr_link_id

(Optional)

rtr_link_data_str

(Optional)

rtr_link_data

(Optional)

rtr_link_num_tos

(Optional)

rtr_link_metric

(Optional)

TABLE_rlinktos

(Optional)

rtr_link_tos_id

(Optional)

rtr_link_tos_metric

(Optional)

net_mask

(Optional)

TABLE_netlsa

(Optional)

net_rtr

(Optional)

sum_mask

(Optional)

sum_metric

(Optional)

TABLE_sumlsa

(Optional)

sum_tos_id

(Optional)

sum_tos_metric

(Optional)

nssa_mask

(Optional)

nssa_metric_type2

(Optional)

nssa_metric

(Optional)

nssa_fwd_addr

(Optional)

nssa_tag

(Optional)

TABLE_nssa

(Optional)

nssa_tos_metric_type2

(Optional)

nssa_tos_id

(Optional)

nssa_tos_metric

(Optional)

nssa_tos_fwd_addr

(Optional)

nssa_tos_tag

(Optional)

asext_mask

(Optional)

asext_metric_type2

(Optional)

asext_metric

(Optional)

asext_fwd_addr

(Optional)

asext_tag

(Optional)

TABLE_asext

(Optional)

asext_tos_metric_type2

(Optional)

asext_tos_id

(Optional)

asext_tos_metric

(Optional)

asext_tos_fwd_addr

(Optional)

asext_tos_tag

(Optional)

opaque_link_intf

(Optional)

opaque_unknown

(Optional)

opaque_data_len

(Optional)

opaque_data

(Optional)

opaque_corrupt

(Optional)

tlv_type

(Optional)

tlv_len

(Optional)

tlv_data

(Optional)

tlv_unknown

(Optional)

gr_interval

(Optional)

gr_reason

(Optional)

gr_addr

(Optional)

te_frag_id

(Optional)

te_rtr_id

(Optional)

te_link_type

(Optional)

te_link_id

(Optional)

te_link_metric

(Optional)

te_link_max_bw

(Optional)

te_link_rsv_bw

(Optional)

te_link_unrsv_bw

(Optional)

te_link_admin

(Optional)

te_num_links

(Optional)

Command Mode

- /exec

show ip ospf event-history

show ip ospf [ <tag> ] [ internal ] event-history { errors | msgs | statistics | adjacency | event | ha | flooding | lsa | spf | redistribution | ldp | te | rib | hello | spf-trigger | cli | objstore | segrt }

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Show various event logs of OSPF

errors

Error logs

msgs

IPC logs

statistics

Show the state and size of the buffers

adjacency

Adjacency formation logs

event

Internal event logs

ha

HA and GR logs

flooding

LSA flooding logs

lsa

LSA generation and databse logs

spf

SPF calculation logs

redistribution

Redistribution logs

ldp

LDP related logs

te

MPLS TE related logs

rib

RIB related logs

hello

Hello related logs

cli

Cli logs

spf-trigger

SPF TRIGGER related logs

objstore

DME OBJSTORE related logs

segrt

Segment Routing logs

Command Mode

- /exec

show ip ospf event-history detail

show ip ospf [ <tag> ] [ internal ] event-history detail [ statistics ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Show event history of OSPF

detail

Show detailed event history information

statistics

(Optional) Show the state and size of the verbose history buffer

Command Mode

- /exec

show ip ospf ha

show ip ospf [ <tag> ] ha [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <stateful> <pss_restored> <pss_state> <gr_enabled> <gr_grace_period> <gr_state> <gr_last_status> <gr_helper_mode> ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ha

High Availability status

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

stateful

(Optional)

pss_restored

(Optional)

pss_state

(Optional)

gr_enabled

(Optional)

gr_grace_period

(Optional)

gr_state

(Optional)

gr_last_status

(Optional)

gr_helper_mode

(Optional)

Command Mode

- /exec

show ip ospf interface

show ip ospf [ <tag> ] interface [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_intf <ifname> <admin_status> <proto_status> [ <unnumbered> ] <addr> [ <masklen> ] [ <parent_intf> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> [ <bfd_enabled> ] [ <ldp_sync> ] [ <sid_index> ] [ <sid_n_flag_clear> ] [ <sid_exp_null> ] <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <auth_type> ] [ <keychain_name> ] [ <keychain_ready> ] [ <auth_md5_keyid> ] [ <auth_keyid> ] [ <auth_algo> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

OSPF enabled interface

interface

(Optional) OSPF enabled interface

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

admin_status

(Optional)

proto_status

(Optional)

unnumbered

(Optional)

addr

(Optional)

masklen

(Optional)

parent_intf

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

bfd_enabled

(Optional)

ldp_sync

(Optional)

sid_index

(Optional)

sid_n_flag_clear

(Optional)

sid_exp_null

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

dr_addr

(Optional)

bdr_rid

(Optional)

bdr_addr

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

auth_type

(Optional)

keychain_name

(Optional)

keychain_ready

(Optional)

auth_md5_keyid

(Optional)

auth_keyid

(Optional)

auth_algo

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

Command Mode

- /exec

show ip ospf interface brief

show ip ospf [ <tag> ] interface brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <intf_count> TABLE_intf <ifname> <index> <area> <cost> <state_str> <nbr_total> <admin_status> ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

OSPF enabled interface

brief

Display summary of OSPF interfaces

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

intf_count

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

index

(Optional)

area

(Optional)

cost

(Optional)

state_str

(Optional)

nbr_total

(Optional)

admin_status

(Optional)

Command Mode

- /exec

show ip ospf lsa-content-changed-list

show ip ospf [ <tag> ] lsa-content-changed-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lschg <nbr_rid> <intf> <nbr_addr> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

lsa-content-changed-list

LSAs that changed contents

interface

OSPF enabled interface

ip-addr

Neighbor router ID

neighbor-name

DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_lschg

(Optional)

nbr_rid

(Optional)

intf

(Optional)

nbr_addr

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ip ospf memory

show ip ospf [ <tag> ] memory [ __readonly__ TABLE_mem <ptag> <byte_total> <byte_consumed> <byte_overhead> <byte_allocated> <alloc_current> <alloc_created> <alloc_failed> <alloc_free> <bf_current> <bf_created> <bf_failed> <bf_free> <bf_byte_consumed> <bf_32_current> <bf_32_created> <bf_32_failed> <bf_32_free> <bf_32_byte_consumed> <slab_current> <slab_created> <slab_failed> <slab_free> <slab_byte_consumed> <if_index_alloc_failed> <nbr_index_alloc_failed> ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

memory

Memory usage statistics

__readonly__

(Optional)

TABLE_mem

(Optional)

ptag

(Optional)

byte_total

(Optional)

byte_consumed

(Optional)

byte_overhead

(Optional)

byte_allocated

(Optional)

alloc_current

(Optional)

alloc_created

(Optional)

alloc_failed

(Optional)

alloc_free

(Optional)

bf_current

(Optional)

bf_created

(Optional)

bf_failed

(Optional)

bf_free

(Optional)

bf_byte_consumed

(Optional)

bf_32_current

(Optional)

bf_32_created

(Optional)

bf_32_failed

(Optional)

bf_32_free

(Optional)

bf_32_byte_consumed

(Optional)

slab_current

(Optional)

slab_created

(Optional)

slab_failed

(Optional)

slab_free

(Optional)

slab_byte_consumed

(Optional)

if_index_alloc_failed

(Optional)

nbr_index_alloc_failed

(Optional)

Command Mode

- /exec

show ip ospf neighbors

show ip ospf [ <tag> ] neighbors [ { { <interface> [ <neighbor> | <neighbor-name> ] } | { [ <neighbor> | <neighbor-name> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } ] [ __readonly__ TABLE_ctx <ptag> <cname> <nbrcount> [ TABLE_nbr <rid> <priority> <state> <drstate> <uptime> <addr> <intf> [ <multiarea> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

neighbor

(Optional) Router ID of neighbor

neighbor-name

(Optional) DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

nbrcount

(Optional)

TABLE_nbr

(Optional)

rid

(Optional)

priority

(Optional)

state

(Optional)

drstate

(Optional)

uptime

(Optional)

addr

(Optional)

intf

(Optional)

multiarea

(Optional)

Command Mode

- /exec

show ip ospf neighbors detail

show ip ospf [ <tag> ] neighbors [ <interface> ] [ <neighbor> | <neighbor-name> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_nbr <rid> <addr> <area> <intf> <state> <transition> <lastchange> [ <bfd_state> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <dc> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] <helloptions> <dbdoptions> <lastnonhello> [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

neighbor

(Optional) Router ID of neighbor

neighbor-name

(Optional) DNS Name of the neighbor

detail

Show detailed neighbor display

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_nbr

(Optional)

rid

(Optional)

addr

(Optional)

area

(Optional)

intf

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

bfd_state

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

dc

(Optional)

Command Mode

- /exec

show ip ospf neighbors summary

show ip ospf [ <tag> ] neighbors [ <interface> ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> TABLE_intf { <ifname> | <total> } <down> <attempt> <init> <twoway> <exstart> <exchange> <loading> <full> <if_total> ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

summary

Summary of neighbors

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

total

(Optional)

down

(Optional)

attempt

(Optional)

init

(Optional)

twoway

(Optional)

exstart

(Optional)

exchange

(Optional)

loading

(Optional)

full

(Optional)

if_total

(Optional)

Command Mode

- /exec

show ip ospf policy statistics

show ip ospf [ <inst> ] policy statistics { { redistribute { { bgp | eigrp } <as> | { isis | ospf | rip } <tag> | static | direct | amt } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <ptag> TABLE_ctx <cname> ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

inst

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

policy

Display Policy related information

statistics

Display Route Filter statistics

redistribute

Statistics for redistribution

isis

ISO Intermediate-to-Intermediate (IS-IS)

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

ospf

Open Shortest Path First (OSPFv2)

eigrp

Enhanced Interior Gateway Protocol (EIGRP)

rip

Routing Information Protocol (RIP)

static

Static

direct

Directly connected

amt

AMT anycast prefix

tag

Source protocol tag

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

in

Filter networks sent to this area

out

Filter networks sent from this area

__readonly__

(Optional)

ptag

(Optional)

TABLE_ctx

(Optional)

cname

(Optional)

Command Mode

- /exec

show ip ospf request-list

show ip ospf [ <tag> ] request-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lsreq <nbr_rid> <intf> <nbr_addr> <total> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

request-list

Link state request list

interface

OSPF enabled interface

ip-addr

Neighbor router ID

neighbor-name

DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_lsreq

(Optional)

nbr_rid

(Optional)

intf

(Optional)

nbr_addr

(Optional)

total

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ip ospf retransmission-list

show ip ospf [ <tag> ] retransmission-list { <routerid> | <router-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_rxmit <nbr_rid> <intf> <nbr_addr> [ <timer_running> ] [ <timer_due> ] [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

retransmission-list

Link state retransmission list

routerid

Neighbor router ID

router-name

DNS Name of the router

interface

OSPF enabled interface

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_rxmit

(Optional)

nbr_rid

(Optional)

intf

(Optional)

nbr_addr

(Optional)

timer_running

(Optional)

timer_due

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ip ospf route

show ip ospf [ <tag> ] route [ <ip-addr> | <ip-prefix> [ longer-prefixes ] ] [ detail ] [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ <hdr_addr> ] [ <hdr_masklen> ] [ TABLE_route <addr> <masklen> <type> <in_rib> <direct> [ <area> ] [ <tag> ] [ <vlink_unresolved> ] [ TABLE_route_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] [ <ubest_cost> ] [ <distance> ] [ <ubest_nh_direct> ] [ <ubest_nh_in_rib> ] ] [ TABLE_route_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] [ <mbest_cost> ] [ <mbest_nh_direct> ] [ <mbest_nh_in_rib> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Internal OSPF routes

ip-addr

(Optional) Show single OSPF route

ip-prefix

(Optional) Show single exact match OSPF route

longer-prefixes

(Optional) Show exact match and more specific routes

detail

(Optional) Detailed information

all_routes

(Optional) Display all OSPF routes

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

hdr_addr

(Optional)

hdr_masklen

(Optional)

TABLE_route

(Optional)

addr

(Optional)

masklen

(Optional)

type

(Optional)

in_rib

(Optional)

direct

(Optional)

area

(Optional)

vlink_unresolved

(Optional)

TABLE_route_ubest_nh

(Optional)

ubest_nh_addr

(Optional)

ubest_nh_intf

(Optional)

ubest_cost

(Optional)

distance

(Optional)

ubest_nh_direct

(Optional)

ubest_nh_in_rib

(Optional)

TABLE_route_mbest_nh

(Optional)

mbest_nh_addr

(Optional)

mbest_nh_intf

(Optional)

mbest_cost

(Optional)

mbest_nh_direct

(Optional)

mbest_nh_in_rib

(Optional)

Command Mode

- /exec

show ip ospf route summary

show ip ospf [ <tag> ] route [ <ip-prefix> [ longer-prefixes ] ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_route <total_routes> <total_paths> [ TABLE_route_type <path_type> <path_routes> <path_paths> ] [ TABLE_route_masklen <masklen> <masklen_routes> <masklen_paths> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Internal OSPF routes

ip-prefix

(Optional) Show single exact match OSPF route

longer-prefixes

(Optional) Show exact match and more specific routes

summary

Show route counts

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_route

(Optional)

total_routes

(Optional)

total_paths

(Optional)

TABLE_route_type

(Optional)

path_type

(Optional)

path_routes

(Optional)

path_paths

(Optional)

TABLE_route_masklen

(Optional)

masklen

(Optional)

masklen_routes

(Optional)

masklen_paths

(Optional)

Command Mode

- /exec

show ip ospf segment-routing global-block

show ip ospf [ <tag> ] segment-routing global-block [ <adv-rtr> ] [ detail ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ { TABLE_segrt_global_block <area> <adv_router_id> <SR_capable> <SR_algo> <SRGB_base> <SRGB_range> [ <ril_area> ] [ <lsa> ] } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

segment-routing

Segment-Routing information

global-block

Global Block

adv-rtr

(Optional) Advertising Router ID

detail

(Optional) Detailed Information

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_segrt_global_block

(Optional)

adv_router_id

(Optional)

SR_capable

(Optional)

SR_algo

(Optional)

SRGB_base

(Optional)

SRGB_range

(Optional)

area

(Optional)

ril_area

(Optional)

lsa

(Optional)

Command Mode

- /exec

show ip ospf segment-routing sid-database

show ip ospf [ <tag> ] segment-routing sid-database [ <sid-id> ] [ detail ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ { TABLE_segrt_sid_db <sid_val> <prefix> <prefix_mask> <own_prefix> [ <adv_rtr_vtx_reachable> ] [ <sid_conflict> ] [ <area> ] [ <route_type> ] [ <pfx_flags> ] [ <sid_flags> ] [ <lsa> ] [ <lsa_ref_count> ] } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

segment-routing

Segment-Routing information

sid-database

SID Database

sid-id

(Optional) SID value

detail

(Optional) Detailed Information

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_segrt_sid_db

(Optional)

sid_val

(Optional)

prefix

(Optional)

prefix_mask

(Optional)

own_prefix

(Optional)

adv_rtr_vtx_reachable

(Optional)

sid_conflict

(Optional)

area

(Optional)

route_type

(Optional)

pfx_flags

(Optional)

sid_flags

(Optional)

lsa

(Optional)

lsa_ref_count

(Optional)

Command Mode

- /exec

show ip ospf sham-links

show ip ospf [ <tag> ] sham-links [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_slink <name> [ <nbr_rid> ] <if_state> <transit_area> <nh_intf> <nbr_addr> [ <transit_area_stub> ] [ <transit_area_nssa> ] <addr> [ <masklen> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> [ <bfd_enabled> ] <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <sum_total> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <auth_type> ] [ <keychain_name> ] [ <keychain_ready> ] [ <auth_md5_keyid> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <dc_enabled> ] [ <dest_ip> ] [ <src_ip> ] [ <ifnum> ] [ <state> ] [ <transition> ] [ <lastchange> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] [ <helloptions> ] [ <dbdoptions> ] [ <lastnonhello> ] [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

sham-links

Sham link information

brief

(Optional) Display summary of OSPF sham links

__readonly__

(Optional)

ptag

(Optional)

TABLE_ctx

(Optional)

cname

(Optional)

TABLE_slink

(Optional)

name

(Optional)

nbr_rid

(Optional)

if_state

(Optional)

transit_area

(Optional)

nh_intf

(Optional)

dc_enabled

(Optional)

nbr_addr

(Optional)

sum_total

(Optional)

transit_area_stub

(Optional)

transit_area_nssa

(Optional)

addr

(Optional)

masklen

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

bfd_enabled

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

dr_addr

(Optional)

bdr_rid

(Optional)

bdr_addr

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

auth_type

(Optional)

keychain_name

(Optional)

keychain_ready

(Optional)

auth_md5_keyid

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

dest_ip

(Optional)

src_ip

(Optional)

ifnum

(Optional)

Command Mode

- /exec

show ip ospf statistics

show ip ospf [ <tag> ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_stats <ptag> <cname> <last_clear> <rid_change> <dr_elections> <older_lsa_recv> <nbr_state_change> <nbr_dead_postpone> <nbr_dead_expire> <nbr_bad_lsreq> <nbr_seqno_mismatch> <spf_full> <spf_summary> <spf_external> <spf_extsummary> <rtr_generate> <rtr_refresh> <rtr_flush> <rtr_other_flush> <net_generate> <net_refresh> <net_flush> <net_other_flush> <sum_generate> <sum_refresh> <sum_flush> <sum_other_flush> <asbr_generate> <asbr_refresh> <asbr_flush> <asbr_other_flush> <asext_generate> <asext_refresh> <asext_flush> <asext_other_flush> <opaque_link_generate> <opaque_link_refresh> <opaque_link_flush> <opaque_link_other_flush> <opaque_area_generate> <opaque_area_refresh> <opaque_area_flush> <opaque_area_other_flush> <opaque_as_generate> <opaque_as_refresh> <opaque_as_flush> <opaque_as_other_flush> <limbo_lsa_count> <limbo_lsa_hwm> <limbo_lsa_deleted> <limbo_lsa_revived> <limbo_runs> <limbo_lsa_last_time_hwm> [ <limbo_timer> ] <helloq_size> <helloq_max_size> <helloq_hwm> <helloq_drops> <helloq_last_hwm_time> <floodq_size> <floodq_max_size> <floodq_hwm> <floodq_drops> <floodq_last_hwm_time> <lsdb_add_fail> [ TABLE_buffer_detail [ <buf_size> ] [ <buf_size_huge> ] <buf_in_use> <buf_hwm> <buf_perm> <buf_alloc> <buf_free> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Event counters

__readonly__

(Optional)

TABLE_stats

(Optional)

ptag

(Optional)

cname

(Optional)

last_clear

(Optional)

rid_change

(Optional)

dr_elections

(Optional)

older_lsa_recv

(Optional)

nbr_state_change

(Optional)

nbr_dead_postpone

(Optional)

nbr_dead_expire

(Optional)

nbr_bad_lsreq

(Optional)

nbr_seqno_mismatch

(Optional)

spf_full

(Optional)

spf_summary

(Optional)

spf_external

(Optional)

spf_extsummary

(Optional)

rtr_generate

(Optional)

rtr_refresh

(Optional)

rtr_flush

(Optional)

rtr_other_flush

(Optional)

net_generate

(Optional)

net_refresh

(Optional)

net_flush

(Optional)

net_other_flush

(Optional)

sum_generate

(Optional)

sum_refresh

(Optional)

sum_flush

(Optional)

sum_other_flush

(Optional)

asbr_generate

(Optional)

asbr_refresh

(Optional)

asbr_flush

(Optional)

asbr_other_flush

(Optional)

asext_generate

(Optional)

asext_refresh

(Optional)

asext_flush

(Optional)

asext_other_flush

(Optional)

opaque_link_generate

(Optional)

opaque_link_refresh

(Optional)

opaque_link_flush

(Optional)

opaque_link_other_flush

(Optional)

opaque_area_generate

(Optional)

opaque_area_refresh

(Optional)

opaque_area_flush

(Optional)

opaque_area_other_flush

(Optional)

opaque_as_generate

(Optional)

opaque_as_refresh

(Optional)

opaque_as_flush

(Optional)

opaque_as_other_flush

(Optional)

limbo_lsa_count

(Optional)

limbo_lsa_hwm

(Optional)

limbo_lsa_deleted

(Optional)

limbo_lsa_revived

(Optional)

limbo_runs

(Optional)

limbo_lsa_last_time_hwm

(Optional)

limbo_timer

(Optional)

helloq_size

(Optional)

helloq_max_size

(Optional)

helloq_hwm

(Optional)

helloq_drops

(Optional)

helloq_last_hwm_time

(Optional)

floodq_size

(Optional)

floodq_max_size

(Optional)

floodq_hwm

(Optional)

floodq_drops

(Optional)

floodq_last_hwm_time

(Optional)

lsdb_add_fail

(Optional)

TABLE_buffer_detail

(Optional)

buf_size

(Optional)

buf_size_huge

(Optional)

buf_in_use

(Optional)

buf_hwm

(Optional)

buf_perm

(Optional)

buf_alloc

(Optional)

buf_free

(Optional)

Command Mode

- /exec

show ip ospf summary-address

show ip ospf [ <tag> ] summary-address [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ctx <ptag> <cname> <rid> [ TABLE_sum <addr> <masklen> [ <metric> ] [ <tag> ] [ <pending> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

summary-address

Summary-address redistribution information

private

(Optional) Developer-only statistics

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

rid

(Optional)

TABLE_sum

(Optional)

addr

(Optional)

masklen

(Optional)

metric

(Optional)

pending

(Optional)

Command Mode

- /exec

show ip ospf traffic

show ip ospf [ <tag> ] traffic [ <interface> [ detail ] | [ detail ] | [ detail ] vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_traf <ptag> <cname> <last_clear> [ <ifname> ] <pkt_in> <pkt_out> <lsu_first_trans> <lsu_retrans> <lsu_for_lsreq> <lsu_nbr_trans> <throttle_out> <throttle_out_token> <throttle_out_ip> <lsa_ignored> <lsa_dropped_spf> <lsa_dropped_gr> <pkt_drops_in> <pkt_drops_out> <pkt_errors_in> <pkt_errors_out> <hello_errors_in> <dbds_errors_in> <lsreqs_errors_in> <lsus_errors_in> <lsacks_errors_in> <pkt_unknown_in> <pkt_unknown_out> <pkt_no_ospf_intf> <bad_version> <bad_crc> <dup_rtr_id> <dup_src_addr> <invalid_src_addr> <invalid_dst_addr> <non_existing_nbr> <pkt_passive_intf> <wrong_area> <invalid_pkt_len> <nbr_changed_routerid_ipaddr> <nbr_changed_interfaceid> [ <bad_auth> ] [ <bad_reserved> ] [ <pkt_no_vrf> ] <hellos_in> <dbds_in> <lsreqs_in> <lsus_in> <lsacks_in> <hellos_out> <dbds_out> <lsreqs_out> <lsus_out> <lsacks_out> [ <hellos_in_hq> <dbds_in_hq> <lsreqs_in_flq> <lsus_in_flq> <lsacks_in_flq> <lsas_in_dbds_in> <lsas_in_lsreqs_in> <lsas_in_lsus_in> <lsas_in_lsacks_in> <lsas_in_dbds_out> <lsas_in_lsreqs_out> <lsas_in_lsus_out> <lsas_in_lsacks_out> <lsas_in_rxmt_lsus_out> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

interface

(Optional) OSPF enabled interface

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Packet counters

__readonly__

(Optional)

TABLE_traf

(Optional)

ptag

(Optional)

cname

(Optional)

last_clear

(Optional)

ifname

(Optional)

pkt_in

(Optional)

pkt_out

(Optional)

lsu_first_trans

(Optional)

lsu_retrans

(Optional)

lsu_for_lsreq

(Optional)

lsu_nbr_trans

(Optional)

throttle_out

(Optional)

throttle_out_token

(Optional)

throttle_out_ip

(Optional)

lsa_ignored

(Optional)

lsa_dropped_spf

(Optional)

lsa_dropped_gr

(Optional)

pkt_drops_in

(Optional)

pkt_drops_out

(Optional)

pkt_errors_in

(Optional)

pkt_errors_out

(Optional)

hello_errors_in

(Optional)

dbds_errors_in

(Optional)

lsreqs_errors_in

(Optional)

lsus_errors_in

(Optional)

lsacks_errors_in

(Optional)

pkt_unknown_in

(Optional)

pkt_unknown_out

(Optional)

pkt_no_ospf_intf

(Optional)

bad_version

(Optional)

bad_crc

(Optional)

dup_rtr_id

(Optional)

dup_src_addr

(Optional)

invalid_src_addr

(Optional)

invalid_dst_addr

(Optional)

non_existing_nbr

(Optional)

pkt_passive_intf

(Optional)

wrong_area

(Optional)

invalid_pkt_len

(Optional)

nbr_changed_routerid_ipaddr

(Optional)

nbr_changed_interfaceid

(Optional)

bad_auth

(Optional)

bad_reserved

(Optional)

pkt_no_vrf

(Optional)

hellos_in

(Optional)

dbds_in

(Optional)

lsreqs_in

(Optional)

lsus_in

(Optional)

lsacks_in

(Optional)

hellos_out

(Optional)

dbds_out

(Optional)

lsreqs_out

(Optional)

lsus_out

(Optional)

lsacks_out

(Optional)

hellos_in_hq

(Optional)

dbds_in_hq

(Optional)

lsreqs_in_flq

(Optional)

lsus_in_flq

(Optional)

lsacks_in_flq

(Optional)

lsas_in_dbds_in

(Optional)

lsas_in_lsreqs_in

(Optional)

lsas_in_lsus_in

(Optional)

lsas_in_lsacks_in

(Optional)

lsas_in_dbds_out

(Optional)

lsas_in_lsreqs_out

(Optional)

lsas_in_lsus_out

(Optional)

lsas_in_lsacks_out

(Optional)

lsas_in_rxmt_lsus_out

(Optional)

Command Mode

- /exec

show ip ospf traps-queue

show ip ospf [ <tag> ] traps-queue

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

traps-queue

Show all the priority traps queue parameters

Command Mode

- /exec

show ip ospf virtual-links

show ip ospf [ <tag> ] virtual-links [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_vlink <name> <nbr_rid> <if_state> <transit_area> <nh_intf> <nbr_addr> [ <transit_area_stub> ] [ <transit_area_nssa> ] <addr> [ <masklen> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <auth_type> ] [ <keychain_name> ] [ <keychain_ready> ] [ <auth_md5_keyid> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <dc_enabled> ] [ <state> ] [ <transition> ] [ <lastchange> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] [ <helloptions> ] [ <dbdoptions> ] [ <lastnonhello> ] [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

virtual-links

Virtual link information

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_vlink

(Optional)

name

(Optional)

nbr_rid

(Optional)

if_state

(Optional)

transit_area

(Optional)

nh_intf

(Optional)

dc_enabled

(Optional)

nbr_addr

(Optional)

transit_area_stub

(Optional)

transit_area_nssa

(Optional)

addr

(Optional)

masklen

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

dr_addr

(Optional)

bdr_rid

(Optional)

bdr_addr

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

auth_type

(Optional)

keychain_name

(Optional)

keychain_ready

(Optional)

auth_md5_keyid

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

Command Mode

- /exec

show ip ospf virtual-links brief

show ip ospf [ <tag> ] virtual-links brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <vlink_count> [ TABLE_vlink <nbr_rid> <vlink_num> <transit_area> <cost> <if_state> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

virtual-links

Virtual link information

brief

Display summary of OSPF virtual links

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

vlink_count

(Optional)

TABLE_vlink

(Optional)

nbr_rid

(Optional)

vlink_num

(Optional)

transit_area

(Optional)

cost

(Optional)

if_state

(Optional)

Command Mode

- /exec

show ip overlay-traffic

show ip overlay-traffic

Syntax Description

show

Show running system information

ip

Display IP information

overlay-traffic

Display IP overlay software processed traffic statistics

Command Mode

- /exec

show ip pim bitfield

show ip pim bitfield

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

bitfield

Display compressed bitfield details

Command Mode

- /exec

show ip pim config-sanity

show ip pim config-sanity [ __readonly__ [ TABLE_vrf <out-context> [ TABLE_RP <rp-addr> [ { <rperr-count><rp-interface><rp-error> } ] ] [ TABLE_ANYCAST [ { <arperr-count> <anycastrp-addr> [ <arp-interface> ] <arp-error> [ <configure-as-RP> ] } ] [ TABLE_MEMBER [ { <memerr-count> [ <mem-interface> ] <mem-error> } ] ] <found> ] [ TABLE_BSR [ { <rp-cand-count> [ <rp-cand-interface> ] <rp-cand-error> } ] [ { <bsr-cand-count> [ <bsr-cand-interface> ] <bsr-cand-error> } ] ] [ TABLE_AUTORP [ { <rp-cand-count> [ <rp-cand-interface> ] <rp-cand-error> } ] [ { <auto-cand-count> [ <auto-cand-interface> ] <auto-cand-error> } ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

config-sanity

Configuration Sanity check

__readonly__

(Optional)

TABLE_vrf

(Optional)

out-context

(Optional)

TABLE_RP

(Optional)

rp-addr

(Optional)

TABLE_ANYCAST

(Optional)

arperr-count

(Optional)

anycastrp-addr

(Optional)

arp-interface

(Optional)

arp-error

(Optional)

configure-as-RP

(Optional)

TABLE_MEMBER

(Optional)

memerr-count

(Optional)

mem-interface

(Optional)

mem-error

(Optional)

found

(Optional)

TABLE_BSR

(Optional)

rp-cand-count

(Optional)

rp-cand-interface

(Optional)

rp-cand-error

(Optional)

bsr-cand-count

(Optional)

bsr-cand-interface

(Optional)

bsr-cand-error

(Optional)

TABLE_AUTORP

(Optional)

rp-cand-count

(Optional)

rp-cand-interface

(Optional)

rp-cand-error

(Optional)

auto-cand-count

(Optional)

auto-cand-interface

(Optional)

auto-cand-error

(Optional)

Command Mode

- /exec

show ip pim df

show ip pim df [ <rp-or-group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ internal ] [ __readonly__ [ TABLE_ctx [ <out-context> ] [ TABLE_rp [ <rp-addr> ] [ <df-ordinal> ] [ <df-bits> ] [ <df-bits-count> ] [ <metric-pref> ] [ <metric> ] [ TABLE_grange [ <grange-grp> ] [ <grange-masklen> ] ] [ TABLE_iod [ <if-name> ] [ <df-winner> ] [ <df-state> ] [ <winner-metric-pref> ] [ <winner-metric> ] [ <uptime> ] [ <is-rpf> ] ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

df

Display Bidir Designated Forwarders

rp-or-group

(Optional) Display for a single RP or group address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

(Optional) Commands for internal use

__readonly__

(Optional)

TABLE_ctx

(Optional)

out-context

(Optional)

TABLE_rp

(Optional)

rp-addr

(Optional)

df-ordinal

(Optional)

df-bits

(Optional)

df-bits-count

(Optional)

metric-pref

(Optional)

metric

(Optional)

TABLE_grange

(Optional)

grange-grp

(Optional)

grange-masklen

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

df-winner

(Optional)

df-state

(Optional)

winner-metric-pref

(Optional)

winner-metric

(Optional)

uptime

(Optional)

is-rpf

(Optional)

Command Mode

- /exec

show ip pim event-history

show ip pim [ internal ] event-history { errors | msgs | <pim-event-hist-buf-name> | statistics }

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

internal

(Optional) Commands for internal use

event-history

Show various event logs of PIM

errors

Show error logs of PIM

msgs

Show various message logs of PIM

pim-event-hist-buf-name

Show event hist buffer name

statistics

Show the state and size of the buffer

Command Mode

- /exec

show ip pim fabric info

show ip pim fabric info [ __readonly__ <switch_role> <fabric_ctrl_addr> <peer_fabric_ctrl_infra> <vpc_domain_id> <peer_fabric_ctrl_addr> ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

fabric

Fabric functionality

info

show the fabric info

__readonly__

(Optional)

switch_role

(Optional)

fabric_ctrl_addr

(Optional)

peer_fabric_ctrl_infra

(Optional)

vpc_domain_id

(Optional)

peer_fabric_ctrl_addr

(Optional)

Command Mode

- /exec

show ip pim fabric legacy-vlans

show ip pim fabric legacy-vlans [ __readonly__ TABLE_legacy_vlan <vlan_id> ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

fabric

Fabric functionality

legacy-vlans

Show legacy VLANs on this switch

__readonly__

(Optional)

TABLE_legacy_vlan

(Optional)

vlan_id

(Optional)

Command Mode

- /exec

show ip pim group-range

show ip pim group-range [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <out-context> [ { TABLE_group <grp-addr> [ <invalid-grp> ] [ <action> ] [ <mode> ] [ <rp-addr> ] [ <sh-tree-only-range> ] [ <origin> ] } ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

group-range

Display the various group-ranges

group

(Optional) IP address of group to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out-context

(Optional)

TABLE_group

(Optional)

invalid-grp

(Optional)

grp-addr

(Optional)

mode

(Optional)

rp-addr

(Optional)

sh-tree-only-range

(Optional)

action

(Optional)

origin

(Optional)

Command Mode

- /exec

show ip pim host-proxy

show ip pim host-proxy [ __readonly__ TABLE_intf <intf-name> ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

host-proxy

host-proxy

__readonly__

(Optional)

TABLE_intf

(Optional)

intf-name

(Optional)

Command Mode

- /exec

show ip pim interface

show ip pim interface [ <interface> ] [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ internal ] [ __readonly__ [ <is-pim-enabled> ] [ TABLE_vrf [ <out-context> ] [ TABLE_brief [ <if-name> ] [ <if-addr> ] [ <if-dr> ] [ <if-nbr-count> ] [ <if-is-border> ] ] [ TABLE_iod [ <if-name> ] [ <if-status> ] [ <cached_if_status> ] [ <if-addr-summary> ] [ <pim-dr-address> ] [ <dr-priority> ] [ <no-dr-priority> ] [ <nbr-cnt> ] [ <hello-interval-sec> ] [ <hello-interval-msec> ] [ <hello-timer> ] [ <holdtime-msec> ] [ <holdtime-sec> ] [ <if-conf-dr-priority> ] [ <if-conf-delay> ] [ <is-border> ] [ <genid> ] [ <isauth-config> ] [ <nbr-policy-name> ] [ <jp-in-policy-name> ] [ <jp-out-policy-name> ] [ <jp-interval> ] [ <jp-next-send> ] [ <pim-bfd-enabled> ] [ <is-passive> ] [ <is-pim-vpc-svi> ] [ <is-auto-enabled> ] [ <vpc-peer-nbr> ] [ <last-cleared> ] [ <hello-sent> ] [ <hello-rcvd> ] [ <hello-early-sent> ] [ <jp-sent> ] [ <jp-rcvd> ] [ <assert-sent> ] [ <assert-rcvd> ] [ <graft-sent> ] [ <graft-rcvd> ] [ <graft-ack-sent> ] [ <graft-ack-rcvd> ] [ <df-offer-sent> ] [ <df-offer-rcvd> ] [ <df-winner-sent> ] [ <df-winner-rcvd> ] [ <df-backoff-sent> ] [ <df-backoff-rcvd> ] [ <pass-sent> ] [ <pass-rcvd> ] [ <cksum-errors> ] [ <invalid-errors> ] [ <invalid-df-errors> ] [ <auth-failed> ] [ <pak-len-errors> ] [ <ver-errors> ] [ <pkts-self> ] [ <pkts-non-nbr> ] [ <pkts-on-passive> ] [ <jp-rcvd-on-rpf> ] [ <jp-rcvd-no-rp> ] [ <jp-rcvd-wrong-rp> ] [ <jp-rcvd-for-ssm> ] [ <jp-rcvd-for-bidir> ] [ <jp-in-policy-filter> ] [ <jp-out-policy-filter> ] [ <ecmp-redirect-sent> ] [ <ecmp-redirect-recv> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

interface

Display PIM interface related information

interface

(Optional) Interface name of single interface to display

brief

(Optional) Display one line status per interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

(Optional) Commands for internal use

__readonly__

(Optional)

is-pim-enabled

(Optional)

TABLE_vrf

(Optional)

out-context

(Optional)

TABLE_brief

(Optional)

if-name

(Optional)

if-addr

(Optional)

if-dr

(Optional)

if-nbr-count

(Optional)

if-is-border

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

if-status

(Optional)

cached_if_status

(Optional)

if-addr-summary

(Optional)

pim-dr-address

(Optional)

dr-priority

(Optional)

no-dr-priority

(Optional)

nbr-cnt

(Optional)

hello-interval-sec

(Optional)

hello-interval-msec

(Optional)

hello-timer

(Optional)

holdtime-msec

(Optional)

holdtime-sec

(Optional)

if-conf-dr-priority

(Optional)

if-conf-delay

(Optional)

is-border

(Optional)

genid

(Optional)

isauth-config

(Optional)

nbr-policy-name

(Optional)

jp-in-policy-name

(Optional)

jp-out-policy-name

(Optional)

jp-interval

(Optional)

jp-next-send

(Optional)

pim-bfd-enabled

(Optional)

is-passive

(Optional)

is-pim-vpc-svi

(Optional)

is-auto-enabled

(Optional)

vpc-peer-nbr

(Optional)

last-cleared

(Optional)

hello-sent

(Optional)

hello-rcvd

(Optional)

hello-early-sent

(Optional)

jp-sent

(Optional)

jp-rcvd

(Optional)

assert-sent

(Optional)

assert-rcvd

(Optional)

graft-sent

(Optional)

graft-rcvd

(Optional)

graft-ack-sent

(Optional)

graft-ack-rcvd

(Optional)

df-offer-sent

(Optional)

df-offer-rcvd

(Optional)

df-winner-sent

(Optional)

df-winner-rcvd

(Optional)

df-backoff-sent

(Optional)

df-backoff-rcvd

(Optional)

pass-sent

(Optional)

pass-rcvd

(Optional)

cksum-errors

(Optional)

invalid-errors

(Optional)

invalid-df-errors

(Optional)

auth-failed

(Optional)

pak-len-errors

(Optional)

ver-errors

(Optional)

pkts-self

(Optional)

pkts-non-nbr

(Optional)

pkts-on-passive

(Optional)

jp-rcvd-on-rpf

(Optional)

jp-rcvd-no-rp

(Optional)

jp-rcvd-wrong-rp

(Optional)

jp-rcvd-for-ssm

(Optional)

jp-rcvd-for-bidir

(Optional)

jp-in-policy-filter

(Optional)

jp-out-policy-filter

(Optional)

ecmp-redirect-sent

(Optional)

ecmp-redirect-recv

(Optional)

Command Mode

- /exec

show ip pim mdt

show ip pim mdt [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> <mti> <mti_status> <default_mdt_grp> <grp_mode> <asm_shared_tree> <mti_config_mtu> <mti_active_mtu> <cfg_tunnel_src_if> <bgp_update_src_if> <hello_interval> <jp_interval> <data_mdt_join_interval> <data_switchover_interval> <data_holddown_interval> <data_timeout_interval> <mdt_src> <mdt_src_if> <bgp_rd> <bgp_rd_set> <send_join_count> <rcvd_join_count> { TABLE_data_mdt <grange_prefix> <grange_mask_len> <threshold> [ <policy_name> ] } ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

mti

(Optional)

mti_status

(Optional)

default_mdt_grp

(Optional)

grp_mode

(Optional)

asm_shared_tree

(Optional)

mti_config_mtu

(Optional)

mti_active_mtu

(Optional)

cfg_tunnel_src_if

(Optional)

bgp_update_src_if

(Optional)

hello_interval

(Optional)

jp_interval

(Optional)

data_mdt_join_interval

(Optional)

data_switchover_interval

(Optional)

data_holddown_interval

(Optional)

data_timeout_interval

(Optional)

mdt_src

(Optional)

mdt_src_if

(Optional)

bgp_rd

(Optional)

bgp_rd_set

(Optional)

send_join_count

(Optional)

rcvd_join_count

(Optional)

TABLE_data_mdt

(Optional)

grange_prefix

(Optional)

grange_mask_len

(Optional)

threshold

(Optional)

policy_name

(Optional)

Command Mode

- /exec

show ip pim mdt bgp

show ip pim mdt bgp [ mdt-source <src-addr> ] [ __readonly__ { TABLE_entry <bgp_rd> <mdt_src> <mdt_grp> <local> } ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

bgp

Display BGP related information

mdt-source

(Optional) Source address of MVPN neighbor

src-addr

(Optional) Source Address

__readonly__

(Optional)

TABLE_entry

(Optional)

bgp_rd

(Optional)

mdt_src

(Optional)

mdt_grp

(Optional)

local

(Optional)

Command Mode

- /exec

show ip pim mdt history interval

show ip pim mdt history interval <min> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> [ { TABLE_entry <csrc> <cgrp> <psrc> <pgrp> <uptime> <send_count> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

history

Display MDT Data Join Send Histoy

interval

Display in specified interval

min

Minutes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_entry

(Optional)

csrc

(Optional)

cgrp

(Optional)

psrc

(Optional)

pgrp

(Optional)

uptime

(Optional)

send_count

(Optional)

Command Mode

- /exec

show ip pim mdt receive

show ip pim mdt receive [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf [ <out_context> ] [ TABLE_entry [ <csrc> ] [ <cgrp> ] [ <psrc> ] [ <pgrp> ] [ <uptime> ] [ <expires> ] [ <recv_count> ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

receive

Display Received Data Joins Information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_entry

(Optional)

csrc

(Optional)

cgrp

(Optional)

psrc

(Optional)

pgrp

(Optional)

uptime

(Optional)

expires

(Optional)

recv_count

(Optional)

Command Mode

- /exec

show ip pim mdt send

show ip pim mdt send [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> [ { TABLE_entry <csrc> <cgrp> <psrc> <pgrp> <uptime> <send_count> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

send

Display MDT Data Join Send Information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_entry

(Optional)

csrc

(Optional)

cgrp

(Optional)

psrc

(Optional)

pgrp

(Optional)

uptime

(Optional)

send_count

(Optional)

Command Mode

- /exec

show ip pim neighbor

show ip pim neighbor { [ <interface> ] | [ <ipaddr> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ detail | internal ] [ __readonly__ [ TABLE_vrf <out-context> [ TABLE_neighbor <nbr-addr><if-name><uptime><expires> [ <dr-priority> ] <bidir-capable><bfd-state> [ <longest-hello-intvl><non-hello-pkts> ] [ <ecmp-redirect-capable> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

neighbor

Display PIM neighbor related information

interface

(Optional) Display neighbors on single interface name

ipaddr

(Optional) IP address of single neighbor to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display detailed information

internal

(Optional) Commands for internal use

__readonly__

(Optional)

TABLE_vrf

(Optional)

out-context

(Optional)

TABLE_neighbor

(Optional)

dr-priority

(Optional)

ecmp-redirect-capable

(Optional)

Command Mode

- /exec

show ip pim oif-list

show ip pim oif-list <group> [ <source> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> { TABLE_grp <mcast-addrs> <incoming-intf> <rpf-nbr> <timeout-interval> <oif-list-count> [ { TABLE_oiflist <oif-name> } ] <timeout-list-count> [ { TABLE_timeoutlist <timeoutoif-name> } ] <immediate-list-count> [ { TABLE_immediatelist <immediateoif-name> } ] <immediate-timeout-list-count> [ { TABLE_immediatetimeoutlist <immediatetimeoutoif-name> } ] <sgr-prune-list-count> [ { TABLE_sgrprunelist <sgrprunelistoif-name> } ] } ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

oif-list

Display interfaces for oif-list of PIM route

source

(Optional) Source address to display

group

Group address to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_grp

(Optional)

mcast-addrs

(Optional)

incoming-intf

(Optional)

rpf-nbr

(Optional)

timeout-interval

(Optional)

oif-list-count

(Optional)

TABLE_oiflist

(Optional)

oif-name

(Optional)

timeout-list-count

(Optional)

TABLE_timeoutlist

(Optional)

timeoutoif-name

(Optional)

immediate-list-count

(Optional)

TABLE_immediatelist

(Optional)

immediateoif-name

(Optional)

immediate-timeout-list-count

(Optional)

TABLE_immediatetimeoutlist

(Optional)

immediatetimeoutoif-name

(Optional)

sgr-prune-list-count

(Optional)

TABLE_sgrprunelist

(Optional)

sgrprunelistoif-name

(Optional)

Command Mode

- /exec

show ip pim policy statistics

show ip pim policy statistics { register-policy | bsr { bsr-policy | rp-candidate-policy } | auto-rp { rp-candidate-policy | mapping-agent-policy } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_routemap <name> <action> <seq_num> [ { TABLE_cmd <command> <match_count> <compare_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

policy

Policy related information

statistics

Policy statistics

register-policy

Show statistics for register-policy

bsr

Bootstrap protocol RP-distribution policy

bsr-policy

Statistics for filtered BSR messages

rp-candidate-policy

Statistics for filtered RP candidate messages

auto-rp

Statistics for auto-rp messages

rp-candidate-policy

Statistics for filtered RP candidate messages

mapping-agent-policy

Statistics for filtered mapping agent messages

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_routemap

(Optional)

name

(Optional)

action

(Optional)

seq_num

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

compare_count

(Optional)

match_count

(Optional)

total_accept_count

(Optional)

total_reject_count

(Optional)

Command Mode

- /exec

show ip pim policy statistics jp

show ip pim policy statistics { jp-policy | neighbor-policy } <interface> [ __readonly__ { TABLE_routemap <name> <action> <seq_num> [ { TABLE_cmd <command> <match_count> <compare_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

policy

Policy related information

statistics

Policy statistics

jp-policy

Statistics for jp-policy

neighbor-policy

Statistics for neighbor-policy

interface

Interface to display policy statistics for

__readonly__

(Optional)

TABLE_routemap

(Optional)

name

(Optional)

action

(Optional)

seq_num

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

compare_count

(Optional)

match_count

(Optional)

total_accept_count

(Optional)

total_reject_count

(Optional)

Command Mode

- /exec

show ip pim route

show ip pim route [ [ <source> [ <group> ] ] | [ <group> [ <source> ] ] ] [ bitfield ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf [ <context-name> ] [ <route-count> ] [ TABLE_one_route [ <mcast-addrs> ] [ <rp-addr> ] [ <rp-local> ] [ <bidir> ] [ <sgexpire> ] [ <sgrexpire> ] [ <timeleft> ] [ <rp-bit> ] [ <register> ] [ <intf-name> ] [ <rpf-nbr-1> ] [ <rpf-nbr-addr> ] [ <intf-name-2> ] [ <rpf-nbr-2> ] [ <uptime> ] [ <is-attached> ] [ <is-static> ] [ <zero-nonpim-oifs> ] [ <is-external> ] [ <otv-decap> ] [ <otv-router-mode> ] [ <non-dr-oifs-only> ] [ <data-created> ] [ <mdt-encap> ] [ <mdt-decap> ] [ <vxlan-decap> ] [ <vxlan-encap> ] [ <sw-pkts> ] [ <sw-bytes> ] [ <hw-pkts> ] [ <hw-bytes> ] [ <rpf-src> ] [ <mrib-rpf-notify> ] [ <add-pending> ] [ <aged-route> ] [ <sg-expiry-cfg> ] [ <jp-holdtime> ] [ <route-metric-internal> ] [ <metric-pref-internal> ] [ <delay-register-stop> ] [ <register-stop-rcvd> ] [ <lisp-src-rloc> ] [ TABLE_lisp_encap [ <encap-src-rloc> ] [ <encap-dst-rloc> ] [ <timeout-count> ] [ <add-pending> ] [ <del-pending> ] ] [ <oif-count> ] [ <oif-bf-str> ] [ <timeout-count> ] [ <timeout-bf-str> ] [ <immediate-count> ] [ <immediate-bf-str> ] [ <immediate-timeout-count> ] [ <immediate-timeout-bf-str> ] [ <sgr-prune-list-count> ] [ <sgr-prune-list-bf-str> ] [ <timeout-interval> ] [ <jp-holdtime-rndup> ] [ <mdt-encap-index> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

route

Display PIM specific route information

group

(Optional) Group address to display

source

(Optional) Source address to display

bitfield

(Optional) Display details of each bitfield for PIM route

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

context-name

(Optional)

route-count

(Optional)

TABLE_one_route

(Optional)

mcast-addrs

(Optional)

rp-addr

(Optional)

rp-local

(Optional)

bidir

(Optional)

sgexpire

(Optional)

sgrexpire

(Optional)

timeleft

(Optional)

rp-bit

(Optional)

register

(Optional)

intf-name

(Optional)

rpf-nbr-1

(Optional)

rpf-nbr-addr

(Optional)

intf-name-2

(Optional)

rpf-nbr-2

(Optional)

uptime

(Optional)

is-attached

(Optional)

is-static

(Optional)

zero-nonpim-oifs

(Optional)

is-external

(Optional)

otv-decap

(Optional)

otv-router-mode

(Optional)

non-dr-oifs-only

(Optional)

data-created

(Optional)

mdt-encap

(Optional)

mdt-decap

(Optional)

vxlan-decap

(Optional)

vxlan-encap

(Optional)

sw-pkts

(Optional)

sw-bytes

(Optional)

hw-pkts

(Optional)

hw-bytes

(Optional)

rpf-src

(Optional)

mrib-rpf-notify

(Optional)

add-pending

(Optional)

aged-route

(Optional)

sg-expiry-cfg

(Optional)

jp-holdtime

(Optional)

route-metric-internal

(Optional)

metric-pref-internal

(Optional)

delay-register-stop

(Optional)

register-stop-rcvd

(Optional)

lisp-src-rloc

(Optional)

TABLE_lisp_encap

(Optional)

encap-src-rloc

(Optional)

encap-dst-rloc

(Optional)

timeout-count

(Optional)

add-pending

(Optional)

del-pending

(Optional)

oif-count

(Optional)

oif-bf-str

(Optional)

timeout-count

(Optional)

timeout-bf-str

(Optional)

immediate-count

(Optional)

immediate-bf-str

(Optional)

immediate-timeout-count

(Optional)

immediate-timeout-bf-str

(Optional)

sgr-prune-list-count

(Optional)

sgr-prune-list-bf-str

(Optional)

timeout-interval

(Optional)

jp-holdtime-rndup

(Optional)

mdt-encap-index

(Optional)

Command Mode

- /exec

show ip pim rp-hash

show ip pim rp-hash <group> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> [ <rp-found> ] [ <is-rp-bsr-learnt> ] [ <out-group1> <rp-addr1> ] [ <out-group> <hash-length> <out-bsr> ] [ { TABLE_rp <rp-addr> <hash> <isbest_hash> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

rp-hash

Display RP hash value for group

group

Group address for RP lookup

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

rp-found

(Optional)

is-rp-bsr-learnt

(Optional)

out-group1

(Optional)

rp-addr1

(Optional)

out-group

(Optional)

hash-length

(Optional)

out-bsr

(Optional)

TABLE_rp

(Optional)

rp-addr

(Optional)

hash

(Optional)

isbest_hash

(Optional)

Command Mode

- /exec

show ip pim rp

show ip pim rp [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ internal ] [ __readonly__ [ TABLE_vrf <out-context> [ <is-bsr-enabled> ] [ <is-bsr-listen-only> ] [ <is-bsr-forward-only> ] [ <bsr-address> ] [ <is-bsr-local> ] [ <bs-timer> ] [ <bsr-uptime> ] [ <bsr-expires> ] [ <bsr-priority> ] [ <bsr-hash-masklen> ] [ <is-autorp-enabled> ] [ <is-autorp-listen-only> ] [ <is-autorp-forward-only> ] [ <auto-rp-addr> ] [ <is-autorp-local> ] [ <autorp-dis-timer> ] [ <autorp-cand-address> ] [ <autorp-up-time> ] [ <autorp-expire-time> ] [ <rp-cand-policy-name> ] [ <bsr-policy-name> ] [ <rp-announce-policy-name> ] [ <rp-discovery-policy-name> ] [ TABLE_anycast_rp <anycast-rp-addr> [ TABLE_arp_rp <arp-rp-addr> <is-rpaddr-local> ] ] [ TABLE_rp [ <rp-addr> ] [ <is-rp-local> ] [ <df-ordinal> ] [ <rp-uptime> ] [ <rp-priority> ] [ <is_autorp_source> ] [ <is_bsr_source> ] [ <is_static_source> ] [ <rp-source> ] [ <static-rp-group-map> ] [ TABLE_grange [ <grange-grp> ] [ <grange-masklen> ] [ <grange-is-deny> ] [ <is-bidir-grp> ] [ <autorp-expires> ] [ <bsr-rp-expires> ] [ <rp-owner-flags> ] ] [ [ <bidir-ordinal> ] [ <df-bits-recovered> ] [ <rpf-nbr-address> ] [ <metric> ] [ <metric-preference> ] ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

rp

Display PIM RP, Auto-RP, and BSR related information

group

(Optional) Display RP for group address

internal

(Optional) Commands for internal use

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out-context

(Optional)

is-bsr-enabled

(Optional)

is-bsr-listen-only

(Optional)

is-bsr-forward-only

(Optional)

bsr-address

(Optional)

is-bsr-local

(Optional)

bsr-priority

(Optional)

bsr-hash-masklen

(Optional)

bs-timer

(Optional)

bsr-uptime

(Optional)

bsr-expires

(Optional)

is-autorp-enabled

(Optional)

is-autorp-listen-only

(Optional)

is-autorp-forward-only

(Optional)

auto-rp-addr

(Optional)

autorp-cand-address

(Optional)

is-autorp-local

(Optional)

autorp-dis-timer

(Optional)

autorp-up-time

(Optional)

autorp-expire-time

(Optional)

rp-cand-policy-name

(Optional)

bsr-policy-name

(Optional)

rp-announce-policy-name

(Optional)

rp-discovery-policy-name

(Optional)

TABLE_anycast_rp

(Optional)

anycast-rp-addr

(Optional)

TABLE_arp_rp

(Optional)

arp-rp-addr

(Optional)

is-rpaddr-local

(Optional)

TABLE_rp

(Optional)

rp-addr

(Optional)

is-rp-local

(Optional)

df-ordinal

(Optional)

rp-uptime

(Optional)

rp-priority

(Optional)

is_autorp_source

(Optional)

is_bsr_source

(Optional)

is_static_source

(Optional)

rp-source

(Optional)

static-rp-group-map

(Optional)

TABLE_grange

(Optional)

grange-grp

(Optional)

grange-masklen

(Optional)

grange-is-deny

(Optional)

is-bidir-grp

(Optional)

autorp-expires

(Optional)

bsr-rp-expires

(Optional)

rp-owner-flags

(Optional)

bidir-ordinal

(Optional)

df-bits-recovered

(Optional)

rpf-nbr-address

(Optional)

metric

(Optional)

metric-preference

(Optional)

Command Mode

- /exec

show ip pim statistics

show ip pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> [ <uptime> <reg-sent> <reg-rcvd> <null-reg-sent> <null-reg-rcvd> <reg-stop-sent> <reg-stop-rcvd> <reg-rcvd-not-rp> <reg-rcvd-for-ssm> <reg-rcvd-for-bidir> <bootstrap-sent> <bootstrap-rcvd> <cand-rp-sent> <cand-rp-rcvd> <bs-no-nbr> <bs-border-deny> <bs-len-errors> <bs-rpf-failed> <bs-no-listen> <candrp-border-deny> <candrp-no-listen> <autorp-announce-sent> <autorp-announce-rcvd> <autorp-discovery-sent> <autorp-discovery-rcvd> <autorp-rpf-failed> <autorp-border-deny> <autorp-invalid-type> <autorp-ttl-expired> <autorp-no-listen> <ctrl-no-route> <data-no-route> <no-state> <create-state> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

statistics

Packet counter statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

uptime

(Optional)

reg-sent

(Optional)

reg-rcvd

(Optional)

null-reg-sent

(Optional)

null-reg-rcvd

(Optional)

reg-stop-sent

(Optional)

reg-stop-rcvd

(Optional)

reg-rcvd-not-rp

(Optional)

reg-rcvd-for-ssm

(Optional)

reg-rcvd-for-bidir

(Optional)

bootstrap-sent

(Optional)

bootstrap-rcvd

(Optional)

cand-rp-sent

(Optional)

cand-rp-rcvd

(Optional)

bs-no-nbr

(Optional)

bs-border-deny

(Optional)

bs-len-errors

(Optional)

bs-rpf-failed

(Optional)

bs-no-listen

(Optional)

candrp-border-deny

(Optional)

candrp-no-listen

(Optional)

autorp-announce-sent

(Optional)

autorp-announce-rcvd

(Optional)

autorp-discovery-sent

(Optional)

autorp-discovery-rcvd

(Optional)

autorp-rpf-failed

(Optional)

autorp-border-deny

(Optional)

autorp-invalid-type

(Optional)

autorp-ttl-expired

(Optional)

autorp-no-listen

(Optional)

ctrl-no-route

(Optional)

data-no-route

(Optional)

no-state

(Optional)

create-state

(Optional)

Command Mode

- /exec

show ip pim vrf

show ip pim vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ detail | internal ] [ __readonly__ { TABLE_context <out-context> <context-id> <count> <table-id> <bfd> <mvpn> } ]

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

vrf

Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs PIM is configured for

detail

(Optional) Display detailed information

internal

(Optional) VRF related internal information

__readonly__

(Optional)

TABLE_context

(Optional)

out-context

(Optional)

context-id

(Optional)

table-id

(Optional)

count

(Optional)

bfd

(Optional)

mvpn

(Optional)

Command Mode

- /exec

show ip ping source-interface

show ip ping source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_ippingvrf <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ping

Display ping client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ippingvrf

(Optional) source interface of ping

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip ping source-interface vrf all

show ip ping source-interface vrf all [ __readonly__ [ { TABLE_ipping <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ping

Display ping client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_ipping

(Optional) source interface of ping

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip policy

show ip policy [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ detail ] [ __readonly__ { TABLE_pbr [ <interface> ] [ <rmap> ] [ <status> ] [ <vrf_name> ] } ]

Syntax Description

show

Show running system information

ip

Display IP information

policy

Policy routing

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_pbr

(Optional)

interface

(Optional)

rmap

(Optional)

status

(Optional)

vrf_name

(Optional)

Command Mode

- /exec

show ip prefix-list

show ip prefix-list { { [ detail | summary ] [ <ipv4-pfl-name> | <ipv4-pfl-cfg-name> ] } | { { <ipv4-pfl-name> | <ipv4-pfl-cfg-name> } seq <seq-no> } | { { <ipv4-pfl-name> | <ipv4-pfl-cfg-name> } <prefix> [ first-match | longer ] } } [ __readonly__ TABLE_ip_pfl <name> <seq> <action> <rule> ]

Syntax Description

show

Show running system information

ip

Display IP information

detail

(Optional) Show detailed information

summary

(Optional) Show summarized information

prefix-list

List IP prefix lists

ipv4-pfl-name

(Optional) Name of prefix-list

ipv4-pfl-cfg-name

(Optional) Known prefix-list name

seq

Sequence number

seq-no

Sequence number

prefix

IP prefix network/length, e.g., 35.0.0.0/8

first-match

(Optional) Find the first match

longer

(Optional) Find the more specific entries

__readonly__

(Optional)

TABLE_ip_pfl

(Optional)

name

(Optional)

seq

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ip process

show ip process [ api ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ip_pro_vrf [ { <pro-cntxt-name> <pro-cntxt-id> <pro-base-tid> <pro-auto-disc> <pro-atuo-add> <pro-null-bcast> <auto-punt-bcast> <static-disc> <static-def-route> <ip-unreach> } ] [ TABLE_pro_api [ <api-vrf> <api-cntxt-id> <api-base-tid> <api-ip-addr> <api-rtr-id-iod> ] ] [ TABLE_iod [ { <entry-iod> } ] ] [ TABLE_local_addr [ { <local-addr> } ] ] ] [ TABLE_ip_pro_all { <all-pro-cntxt-name> <all-pro-cntxt-id> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

process

Display IP global information

api

(Optional) Show api values

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ip_pro_vrf

(Optional)

pro-cntxt-name

(Optional)

pro-cntxt-id

(Optional)

pro-base-tid

(Optional)

pro-auto-disc

(Optional)

pro-atuo-add

(Optional)

pro-null-bcast

(Optional)

auto-punt-bcast

(Optional)

static-disc

(Optional)

static-def-route

(Optional)

ip-unreach

(Optional)

TABLE_pro_api

(Optional)

api-vrf

(Optional)

api-cntxt-id

(Optional)

api-base-tid

(Optional)

api-ip-addr

(Optional)

api-rtr-id-iod

(Optional)

TABLE_iod

(Optional)

entry-iod

(Optional)

TABLE_local_addr

(Optional)

local-addr

(Optional)

TABLE_ip_pro_all

(Optional)

all-pro-cntxt-name

(Optional)

all-pro-cntxt-id

(Optional)

Command Mode

- /exec

show ip rip

show { ipv6 | ip } rip [ instance <inst> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_inst <inst-name> TABLE_vrf <vrf> <port> <mcast-grp> <admin-dist> <update-tmr> <expire-tmr> <garbage-tmr> <def-metric> <max-paths> <def-rt-distrib> <def-distrib-always> <process-disabled> <out-of-mem> [ TABLE_afi <af> { TABLE_interface <if-name> } TABLE_redistrib <redistributing> { TABLE_clients <pibname> <policy> } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

port

(Optional)

mcast-grp

(Optional)

admin-dist

(Optional)

update-tmr

(Optional)

expire-tmr

(Optional)

garbage-tmr

(Optional)

def-metric

(Optional)

max-paths

(Optional)

def-rt-distrib

(Optional)

def-distrib-always

(Optional)

process-disabled

(Optional)

out-of-mem

(Optional)

TABLE_afi

(Optional)

af

(Optional)

TABLE_interface

(Optional)

if-name

(Optional)

TABLE_redistrib

(Optional)

redistributing

(Optional)

TABLE_clients

(Optional)

pibname

(Optional)

policy

(Optional)

Command Mode

- /exec

show ip rip interface

show { ipv6 | ip } rip [ instance <inst> ] interface [ <interface> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_inst <inst-name> TABLE_vrf <vrf> [ TABLE_inter <if-name> <if-status> <protocol-up> <local-only> <no-addr-conf> <if-addr> <if-mask> <if-metric> <poison-reverse> <if-passive> <route-dist-filter> <in-policy> <out-policy> [ { TABLE_auth <auth-ena> <auth-type> <auth-keychain> } ] [ TABLE_detail <import-routes> <periodic-updates> <trigger-updates> <out-mcast-request> <out-ucast-update> <out-ucast-request> <in-mcast-update> <in-mcast-request> <in-ucast-update> <in-ucast-request> <bad-pkt> <bad-route> ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

interface

RIP interface

interface

(Optional) RIP interface

detail

(Optional) Detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

TABLE_inter

(Optional)

if-name

(Optional)

if-status

(Optional)

protocol-up

(Optional)

local-only

(Optional)

no-addr-conf

(Optional)

if-addr

(Optional)

if-mask

(Optional)

if-metric

(Optional)

poison-reverse

(Optional)

if-passive

(Optional)

route-dist-filter

(Optional)

in-policy

(Optional)

out-policy

(Optional)

TABLE_auth

(Optional)

auth-ena

(Optional)

auth-type

(Optional)

auth-keychain

(Optional)

TABLE_detail

(Optional)

import-routes

(Optional)

periodic-updates

(Optional)

trigger-updates

(Optional)

out-mcast-request

(Optional)

out-ucast-update

(Optional)

out-ucast-request

(Optional)

in-mcast-update

(Optional)

in-mcast-request

(Optional)

in-ucast-update

(Optional)

in-ucast-request

(Optional)

bad-pkt

(Optional)

bad-route

(Optional)

Command Mode

- /exec

show ip rip memory

show { ipv6 | ip } rip [ instance <inst> ] memory [ __readonly__ TABLE_inst <inst-name> <type> <size> <count> <hwm> <slab> <overhead> <total> TABLE_total <total-overhead> <total-total> ]

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

rip

Display RIP status and configuration

instance

(Optional) Process ID

inst

(Optional) Process ID

memory

Display RIP memory usage information

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

type

(Optional)

size

(Optional)

count

(Optional)

hwm

(Optional)

slab

(Optional)

overhead

(Optional)

total

(Optional)

TABLE_total

(Optional)

total-overhead

(Optional)

total-total

(Optional)

Command Mode

- /exec

show ip rip neighbor

show { ipv6 | ip } rip [ instance <inst> ] neighbor [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_inst <inst-name> TABLE_vrf <vrf> <numberof-adj> <dead-timer-seconds> { TABLE_adj <adj-addr> <if-name> <last-response-sent> <last-response-rcvd> <last-request-sent> <last-request-rcvd> <last-response-sent-state> <last-response-rcvd-state> <last-request-sent-state> <last-request-rcvd-state> <in-bad-packets> <in-bad-routes> } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP status and configuration

instance

(Optional) Process ID

inst

(Optional) Process ID

neighbor

RIP neighbor

interface

(Optional) RIP interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

numberof-adj

(Optional)

dead-timer-seconds

(Optional)

TABLE_adj

(Optional)

adj-addr

(Optional)

if-name

(Optional)

last-response-sent-state

(Optional)

last-response-sent

(Optional)

last-response-rcvd-state

(Optional)

last-response-rcvd

(Optional)

last-request-sent-state

(Optional)

last-request-sent

(Optional)

last-request-rcvd-state

(Optional)

last-request-rcvd

(Optional)

in-bad-packets

(Optional)

in-bad-routes

(Optional)

Command Mode

- /exec

show ip rip policy statistics redistribute

show ip rip [ instance <inst> ] policy statistics redistribute { bgp <as> | { eigrp | isis | <src-rip> | ospf } <tag> | direct | static } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> { TABLE_rmap <name> <action> <seq_num> [ { TABLE_cmd <command> <compare_count> <match_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

show

Show running system information

ip

Display IP information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

policy

Policy related information

statistics

Policy statistics

redistribute

RIP redistribute routes from other routing protocol

bgp

Border Gateway Protocol (BGP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

as

Autonomous system number

isis

Intermediate-to-intermediate (ISIS)

src-rip

Routing Information Protocol (RIP)

ospf

Open Shortest Path First (OSPFv2)

tag

Process tag

direct

Directly connected routes

static

Static routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_rmap

(Optional) Routemap table

name

(Optional) Route-map Name

action

(Optional) Route-map action

seq_num

(Optional) Sequence number of the rule in route-map

TABLE_cmd

(Optional) Route-map command table

command

(Optional) Route-map command

compare_count

(Optional) Number of comparisons

match_count

(Optional) Number of matches

total_accept_count

(Optional) Total number of packets accepted by the policy

total_reject_count

(Optional) Total number of packets rejected by the policy

Command Mode

- /exec

show ip rip route

show { ipv6 | ip } rip [ instance <inst> ] route [ { <ipv6-prefix> | <ip-prefix> } [ { longer-prefixes | shorter-prefixes } ] ] [ summary ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_inst <inst-name> TABLE_vrf <vrf> [ { TABLE_route <best-route> <rt-prefix> <rt-mask> <rt-numnh> { TABLE_nexthop <nh-direct> <nh-redistrib> <nh-addr> <nh-interface> <nh-metric> <nh-tag> <nh-state> <nh-state-timer> } } ] [ { TABLE_summary <is-summary> <total-num-rts> <total-best-rts> <total-paths> { TABLE_rtspermask <mask-length> <rts-per-mask> } } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

route

RIP routes

summary

(Optional) route counts

ip-prefix

(Optional) Exact prefix

longer-prefixes

(Optional) exact match and more specific routes

shorter-prefixes

(Optional) exact match and less specific routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

TABLE_route

(Optional)

best-route

(Optional)

rt-prefix

(Optional)

rt-mask

(Optional)

rt-numnh

(Optional)

TABLE_nexthop

(Optional)

nh-direct

(Optional)

nh-redistrib

(Optional)

nh-addr

(Optional)

nh-interface

(Optional)

nh-metric

(Optional)

nh-tag

(Optional)

nh-state

(Optional)

nh-state-timer

(Optional)

TABLE_summary

(Optional)

is-summary

(Optional)

total-num-rts

(Optional)

total-best-rts

(Optional)

total-paths

(Optional)

TABLE_rtspermask

(Optional)

mask-length

(Optional)

rts-per-mask

(Optional)

Command Mode

- /exec

show ip rip statistics

show { ipv6 | ip } rip [ instance <inst> ] statistics [ * | <interface> ] [ __readonly__ TABLE_inst <inst-name> TABLE_interface <if-name> <periodic-updates> <trigger-updates> <out-mcast-request> <out-ucast-update> <out-ucast-request> <in-mcast-update> <in-mcast-request> <in-ucast-update> <in-ucast-request> <bad-pkt> <bad-route> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP status and configuration

instance

(Optional) Process ID

inst

(Optional) Process ID

statistics

RIP statistics

interface

(Optional) RIP interface

*

(Optional) RIP statistics for all interfaces

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_interface

(Optional)

if-name

(Optional)

periodic-updates

(Optional)

trigger-updates

(Optional)

out-mcast-request

(Optional)

out-ucast-update

(Optional)

out-ucast-request

(Optional)

in-mcast-update

(Optional)

in-mcast-request

(Optional)

in-ucast-update

(Optional)

in-ucast-request

(Optional)

bad-pkt

(Optional)

bad-route

(Optional)

Command Mode

- /exec

show ip route

show ip route [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ip-addr> | { <ip-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <protocol> [ all ] } | { bind-label <bind-lbl> | next-hop <next-hop> | next-hop-v6 <next-hop-v6> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | detail ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ipnexthop> ] [ <ifname> ] [ <bindlbl> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] [ <ubest> ] [ <mbest> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientnameuni> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientnamemulti> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

Syntax Description

show

Show running system information

ip

Display IP information

route

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

l3vm-info

(Optional) Display corresponding L3VM information

rpf

(Optional) Display RPF information for multicast source

ip-addr

(Optional) Display single route longest match lookup

ip-prefix

(Optional) Display single exact match route

longer-prefixes

(Optional) Display matching routes with mask-lengths >= prefix

shorter-prefixes

(Optional) Display matching routes with mask-lengths <= prefix

protocol

(Optional) Display routes for protocol (or route type)

all

(Optional) Display routes for protocol for backup next-hops too

bind-label

(Optional) Display routes with this bind-label only

bind-lbl

(Optional) Binding label

next-hop

(Optional) Display routes with this next-hop only

next-hop

(Optional) Next hop address

next-hop-v6

(Optional) Display routes with this V6 next-hop only

interface

(Optional) Display routes with this output interface only

interface

(Optional) Interface Name

updated

(Optional) Display routes filtered by last updated time

since

(Optional) Display those routes updated since this time

stime

(Optional) Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

until

(Optional) Display those routes updated until this time

utime

(Optional) Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

summary

(Optional) Display route counts

detail

(Optional) Display routes in full detail

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ipnexthop

(Optional)

ifname

(Optional)

bindlbl

(Optional)

uptime

(Optional)

pref

(Optional)

metric

(Optional)

clientname

(Optional)

type

(Optional)

tag

(Optional)

stale

(Optional)

unres

(Optional)

hidden

(Optional)

stale-label

(Optional)

ubest

(Optional)

mbest

(Optional)

TABLE_summary

(Optional)

routes

(Optional)

paths

(Optional)

multicast_paths

(Optional)

TABLE_unicast

(Optional)

clientnameuni

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_multicast

(Optional)

clientnamemulti

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_route_count

(Optional)

mask_len

(Optional)

count

(Optional)

Command Mode

- /exec

show ip router-id

show ip router-id [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ip

Display IP information

router-id

Display IP router identification

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ip sla application

show ip sla application [ __readonly__ <version> [ <line-length> ] <type-name> <feature-name> <lowmemorymark> <max-entries> <probe-cap> <entries-config> <entries-active> <entries-pending> <entries-inactive> <last-change-time> <rttMonApplReset> [ <rttMonApplTimeOfLastSet> ] ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

application

IP SLAs Application

__readonly__

(Optional)

version

(Optional)

line-length

(Optional)

type-name

(Optional)

feature-name

(Optional)

lowmemorymark

(Optional)

max-entries

(Optional)

probe-cap

(Optional)

entries-config

(Optional)

entries-active

(Optional)

entries-pending

(Optional)

entries-inactive

(Optional)

last-change-time

(Optional)

rttMonApplReset

(Optional) Appl Reset

rttMonApplTimeOfLastSet

(Optional)

Command Mode

- /exec

show ip sla configuration

show ip sla configuration [ <entry-num> ] [ __readonly__ { TABLE_configuration [ <index> ] [ <owner> ] [ <tag> ] [ <timeout> ] [ <oper-type> ] [ <dest-ip> ] [ <source-int> ] [ <source-ip> ] [ <dest-port> ] [ <source-port> ] [ <dns-source-port> ] [ <traffic-class> ] [ <tos> ] [ <dns-name-server> ] [ <flow-label> ] [ <data-pattern> ] [ <switch-id> ] [ <profile-id> ] [ <interface> ] [ <packet-size> ] [ <packet-interval> ] [ <num-packets> ] [ <codec-type> ] [ <codec-num-packets> ] [ <codec-packet-size> ] [ <codec-packet-interval> ] [ <codec-adv-factor> ] [ <verify-data> ] [ <precision> ] [ <packet-priority> ] [ <ntp-sync-tolerance> ] [ <ntp-sync-toltype> ] [ <vrf-name> ] [ <control-enabled> ] [ <http-oper> ] [ <http-version> ] [ <url> ] [ <proxy> ] [ <raw-strings> ] [ <cache-control> ] [ <http-vrf-name> ] [ <http-owner> ] [ <http-tag> ] [ <http-timeout> ] [ <frequency> ] [ <secondary-freq-timeout> ] [ <secondary-freq-loss> ] [ <next-start-time> ] [ <group-scheduled> ] [ <randomly-scheduled> ] [ <low-frequency> ] [ <high-frequency> ] [ <life> ] [ <ageout> ] [ <recurring> ] [ <status-of-entry> ] [ <threshold> ] [ <hours> ] [ <buckets> ] [ <interval> ] [ <einterval> ] [ <ebuckets> ] [ <lives> ] [ <hsbuckets> ] [ <filter> ] } ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

configuration

IP SLA configurtaion

entry-num

(Optional) Entry Number

__readonly__

(Optional)

TABLE_configuration

(Optional) show ip sla configuration information

index

(Optional)

owner

(Optional)

tag

(Optional)

timeout

(Optional)

oper-type

(Optional)

dest-ip

(Optional)

source-int

(Optional)

source-ip

(Optional)

dest-port

(Optional)

source-port

(Optional)

dns-source-port

(Optional)

traffic-class

(Optional)

tos

(Optional)

dns-name-server

(Optional)

flow-label

(Optional)

data-pattern

(Optional)

profile-id

(Optional)

switch-id

(Optional)

interface

(Optional)

packet-size

(Optional)

packet-interval

(Optional)

num-packets

(Optional)

codec-type

(Optional)

codec-num-packets

(Optional)

codec-packet-size

(Optional)

codec-packet-interval

(Optional)

codec-adv-factor

(Optional)

verify-data

(Optional)

precision

(Optional)

packet-priority

(Optional)

ntp-sync-tolerance

(Optional)

ntp-sync-toltype

(Optional)

vrf-name

(Optional)

control-enabled

(Optional)

http-oper

(Optional)

http-version

(Optional)

url

(Optional)

proxy

(Optional)

raw-strings

(Optional)

cache-control

(Optional)

http-vrf-name

(Optional)

http-owner

(Optional)

http-tag

(Optional)

http-timeout

(Optional)

frequency

(Optional)

secondary-freq-timeout

(Optional)

secondary-freq-loss

(Optional)

next-start-time

(Optional)

group-scheduled

(Optional)

randomly-scheduled

(Optional)

low-frequency

(Optional)

high-frequency

(Optional)

life

(Optional)

ageout

(Optional)

recurring

(Optional)

status-of-entry

(Optional)

threshold

(Optional)

hours

(Optional)

buckets

(Optional)

interval

(Optional)

einterval

(Optional)

ebuckets

(Optional)

lives

(Optional)

hsbuckets

(Optional)

filter

(Optional)

Command Mode

- /exec

show ip sla enhanced-history collection-statistics

show ip sla enhanced-history collection-statistics [ <operation-number> [ interval <interval-in-secs> ] ] [ __readonly__ [ { TABLE_generic [ <entry-num> ] [ <aggregate-interval> ] [ { TABLE_bkt [ <bkt-index> ] [ <agg-sti> ] [ <tgt-addr> ] [ <oper-type> ] [ <nofod> ] [ <nofot> ] [ <nofob> ] [ <nofonc> ] [ <nofoie> ] [ <nofose> ] [ <nofove> ] [ <ntp-state> ] [ <icpif> ] [ <mos-score> ] [ <rtt-values> ] [ <num-rtt> ] [ <rtt-avg> ] [ <rtt-min> ] [ <rtt-max> ] [ <rtt-sum> ] [ <rtt-sum2> ] [ <num-out-sync-rtt> ] [ <plsd> ] [ <plds> ] [ <pos> ] [ <pl-mia> ] [ <pla> ] [ <int-err> ] [ <busies> ] [ <pkt-skipped> ] [ <jitter-value-precision> ] [ <min-pos-sd> ] [ <max-pos-sd> ] [ <num-pos-sd> ] [ <sum-pos-sd> ] [ <sum2-pos-sd> ] [ <min-neg-sd> ] [ <max-neg-sd> ] [ <num-neg-sd> ] [ <sum-neg-sd> ] [ <sum2-neg-sd> ] [ <min-pos-ds> ] [ <max-pos-ds> ] [ <num-pos-ds> ] [ <sum-pos-ds> ] [ <sum2-pos-ds> ] [ <min-neg-ds> ] [ <max-neg-ds> ] [ <num-neg-ds> ] [ <sum-neg-ds> ] [ <sum2-neg-ds> ] [ <jitter-avg> ] [ <jitter-sd-avg> ] [ <jitter-ds-avg> ] [ <inter-jit-out> ] [ <inter-jit-in> ] [ <ow-precision> ] [ <num-ow> ] [ <ow-min-sd> ] [ <ow-max-sd> ] [ <ow-sum-sd> ] [ <ow-sum2-sd> ] [ <ow-min-ds> ] [ <ow-max-ds> ] [ <ow-sum-ds> ] [ <ow-sum2-ds> ] [ <avg-ow-sd> ] [ <avg-ow-ds> ] } ] [ <outstring> ] } ] ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

enhanced-history

IP SLAs Enhanced History

collection-statistics

IP SLAs Collection Statistics

operation-number

(Optional) Entry Number

interval

(Optional) Aggregation Interval

interval-in-secs

(Optional) Interval in seconds

__readonly__

(Optional)

TABLE_generic

(Optional) Show History Information

entry-num

(Optional)

aggregate-interval

(Optional)

TABLE_bkt

(Optional) Show bucket History Information

bkt-index

(Optional)

agg-sti

(Optional)

tgt-addr

(Optional)

oper-type

(Optional)

nofod

(Optional)

nofot

(Optional)

nofob

(Optional)

nofonc

(Optional)

nofoie

(Optional)

nofose

(Optional)

nofove

(Optional)

ntp-state

(Optional)

icpif

(Optional)

mos-score

(Optional)

rtt-values

(Optional)

num-rtt

(Optional)

rtt-avg

(Optional)

rtt-min

(Optional)

rtt-max

(Optional)

rtt-sum

(Optional)

rtt-sum2

(Optional)

num-out-sync-rtt

(Optional)

plsd

(Optional)

plds

(Optional)

pos

(Optional)

pl-mia

(Optional)

pla

(Optional)

int-err

(Optional)

busies

(Optional)

pkt-skipped

(Optional)

jitter-value-precision

(Optional)

min-pos-sd

(Optional)

max-pos-sd

(Optional)

num-pos-sd

(Optional)

sum-pos-sd

(Optional)

sum2-pos-sd

(Optional)

min-neg-sd

(Optional)

max-neg-sd

(Optional)

num-neg-sd

(Optional)

sum-neg-sd

(Optional)

sum2-neg-sd

(Optional)

min-pos-ds

(Optional)

max-pos-ds

(Optional)

num-pos-ds

(Optional)

sum-pos-ds

(Optional)

sum2-pos-ds

(Optional)

min-neg-ds

(Optional)

max-neg-ds

(Optional)

num-neg-ds

(Optional)

sum-neg-ds

(Optional)

sum2-neg-ds

(Optional)

jitter-avg

(Optional)

jitter-sd-avg

(Optional)

jitter-ds-avg

(Optional)

inter-jit-out

(Optional)

inter-jit-in

(Optional)

ow-precision

(Optional)

num-ow

(Optional)

ow-min-sd

(Optional)

ow-max-sd

(Optional)

ow-sum-sd

(Optional)

ow-sum2-sd

(Optional)

ow-min-ds

(Optional)

ow-max-ds

(Optional)

ow-sum-ds

(Optional)

ow-sum2-ds

(Optional)

avg-ow-sd

(Optional)

avg-ow-ds

(Optional)

outstring

(Optional)

Command Mode

- /exec

show ip sla enhanced-history distribution-statistics

show ip sla enhanced-history distribution-statistics [ <operation-number> [ interval <interval-in-secs> ] ] [ __readonly__ [ <hdr> ] [ { TABLE_generic [ <col1> ] [ <col2> ] [ <col3> ] } ] ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

enhanced-history

IP SLAs Enhanced History

distribution-statistics

IP SLAs Distribution Statistics

operation-number

(Optional) Entry Number

interval

(Optional) Aggregation Interval

interval-in-secs

(Optional) Interval in seconds

__readonly__

(Optional)

hdr

(Optional)

TABLE_generic

(Optional) Show History Information

col1

(Optional)

col2

(Optional)

col3

(Optional)

Command Mode

- /exec

show ip sla group schedule

show ip sla group schedule [ <group-operation-number> ] [ __readonly__ [ <entry-number> ] [ <probe-list> ] [ <num-probes> ] [ <sched-period> ] [ <mode> ] [ <low-freq> ] [ <high-freq> ] [ <freq> ] [ <snmp-status> ] [ <next-start-time> ] [ <life> ] [ <ageout> ] ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

group

IP SLAs Group Scheduling/Configuration

schedule

Group Scheduling

group-operation-number

(Optional) Group Schedule Entry Number

__readonly__

(Optional)

entry-number

(Optional)

probe-list

(Optional)

num-probes

(Optional)

sched-period

(Optional)

mode

(Optional)

low-freq

(Optional)

high-freq

(Optional)

freq

(Optional)

snmp-status

(Optional)

next-start-time

(Optional)

life

(Optional)

ageout

(Optional)

Command Mode

- /exec

show ip sla history

show ip sla history [ <operation-number> ] [ tabular | full | interval-statistics ] [ __readonly__ [ <outstring> ] [ { TABLE_generic [ <index> ] [ <life-index> ] [ <bucket-index> ] [ <col1> ] [ <addr> ] [ <dest-id> ] [ <nsr> ] [ <st> ] [ <latest-rtt> ] [ <latest-ret-code> ] [ <col2> ] } ] [ <error> ] ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

history

IP SLAs History

operation-number

(Optional) Entry Number

tabular

(Optional) Compact Output

full

(Optional) Listed Output

interval-statistics

(Optional) Interval statistics output

__readonly__

(Optional)

outstring

(Optional)

TABLE_generic

(Optional) Show History Information

index

(Optional)

life-index

(Optional)

bucket-index

(Optional)

col1

(Optional)

addr

(Optional)

dest-id

(Optional)

nsr

(Optional)

st

(Optional)

latest-rtt

(Optional)

latest-ret-code

(Optional)

col2

(Optional)

error

(Optional)

Command Mode

- /exec

show ip sla reaction-configuration

show ip sla reaction-configuration [ <entry-num> ] [ __readonly__ { TABLE_reaction [ <entry-number> ] [ <index> ] [ <reaction> ] [ <threshold-type> ] [ <rising-value> ] [ <falling-value> ] [ <threshold-countX> ] [ <threshold-countY> ] [ <action-type> ] [ <unconfigured> ] } ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

reaction-configuration

IP SLAs Reaction Configuration

entry-num

(Optional) Entry Number

__readonly__

(Optional)

TABLE_reaction

(Optional)

entry-number

(Optional)

index

(Optional)

reaction

(Optional)

threshold-type

(Optional)

rising-value

(Optional)

falling-value

(Optional)

threshold-countX

(Optional)

threshold-countY

(Optional)

action-type

(Optional)

unconfigured

(Optional)

Command Mode

- /exec

show ip sla reaction-trigger

show ip sla reaction-trigger [ <entry-num> ] [ __readonly__ { TABLE_trigger [ <entry-number> ] [ <index> ] [ <target-entry> ] [ <snmp-status> ] [ <operational-state> ] [ <unconfigured> ] } ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

reaction-trigger

IP SLAs Reaction Trigger

entry-num

(Optional) Entry Number

__readonly__

(Optional)

TABLE_trigger

(Optional)

entry-number

(Optional)

index

(Optional)

target-entry

(Optional)

snmp-status

(Optional)

operational-state

(Optional)

unconfigured

(Optional)

Command Mode

- /exec

show ip sla responder

show ip sla responder [ __readonly__ <rttMonApplResponder> <gen-enabled> [ <ctrl-msg-count> ] [ <errors> ] [ { TABLE_recent [ <print-recent-hdr> ] [ <print-recent-err-hdr> ] [ <recent-addr> ] [ <recent-time> ] [ <recent-error> ] } ] <perm-enabled> [ { TABLE_permanent_udp [ <print-udp-hdr> ] [ <address> ] [ <port> ] } ] [ { TABLE_permanent_tcp [ <print-tcp-hdr> ] [ <address> ] [ <port> ] } ] ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

responder

IP SLAs Responder Information

__readonly__

(Optional)

rttMonApplResponder

(Optional) rttMonApplResponder

gen-enabled

(Optional)

ctrl-msg-count

(Optional)

errors

(Optional)

TABLE_recent

(Optional) Show recent control message information

print-recent-hdr

(Optional)

print-recent-err-hdr

(Optional)

recent-addr

(Optional)

recent-time

(Optional)

recent-error

(Optional)

perm-enabled

(Optional)

TABLE_permanent_udp

(Optional) Show UDP permanent port/address information

print-udp-hdr

(Optional)

address

(Optional)

port

(Optional)

TABLE_permanent_tcp

(Optional) Show TCP permanent port/address information

print-tcp-hdr

(Optional)

address

(Optional)

port

(Optional)

Command Mode

- /exec

show ip sla statistics

show ip sla statistics [ aggregated ] [ <entry-num> ] [ details ] [ __readonly__ <print_type> [ { TABLE_stats [ <index> ] [ <top> ] [ { TABLE_detail [ <sti> ] [ <operation-type> ] [ <MINICPIF> ] [ <MAXICPIF> ] [ <MINMOS> ] [ <MAXMOS> ] [ <update-count> ] [ <micro-accuracy> ] [ <nano-accuracy> ] [ <latest-RTT> ] [ <latest-return-code> ] [ <latest-start-time> ] [ <http-dns-rtt> ] [ <http-tcp-rtt> ] [ <http-ttfb> ] [ <http-rtt> ] [ <http-status> ] [ <http-recvlen> ] [ <http-bodysize> ] [ <http-dns-timeout> ] [ <http-tcp-timeout> ] [ <http-t-timeout> ] [ <http-dns-error> ] [ <http-tcp-error> ] [ <http-t-error> ] [ <ntp-sync-state> ] [ <rtt-count> ] [ <rtt-min> ] [ <rtt-avg> ] [ <rtt-max> ] [ <lat-ow-samples> ] [ <sd-lat-ow-min> ] [ <sd-lat-ow-avg> ] [ <sd-lat-ow-max> ] [ <ds-lat-ow-min> ] [ <ds-lat-ow-avg> ] [ <ds-lat-ow-max> ] [ <sd-lat-sum> ] [ <sd-lat-sum2> ] [ <ds-lat-sum> ] [ <ds-lat-sum2> ] [ <sd-jitter-count> ] [ <ds-jitter-count> ] [ <sd-jitter-min> ] [ <sd-jitter-avg> ] [ <sd-jitter-max> ] [ <ds-jitter-min> ] [ <ds-jitter-avg> ] [ <ds-jitter-max> ] [ <sd-pos-jitter-min> ] [ <sd-pos-jitter-avg> ] [ <sd-pos-jitter-max> ] [ <sd-pos-jitter-num> ] [ <sd-pos-jitter-sum> ] [ <sd-pos-jitter-sum2> ] [ <sd-neg-jitter-min> ] [ <sd-neg-jitter-avg> ] [ <sd-neg-jitter-max> ] [ <sd-neg-jitter-num> ] [ <sd-neg-jitter-sum> ] [ <sd-neg-jitter-sum2> ] [ <ds-pos-jitter-min> ] [ <ds-pos-jitter-avg> ] [ <ds-pos-jitter-max> ] [ <ds-pos-jitter-num> ] [ <ds-pos-jitter-sum> ] [ <ds-pos-jitter-sum2> ] [ <ds-neg-jitter-min> ] [ <ds-neg-jitter-avg> ] [ <ds-neg-jitter-max> ] [ <ds-neg-jitter-num> ] [ <ds-neg-jitter-sum> ] [ <ds-neg-jitter-sum2> ] [ <pkt-unprocessed> ] [ <pkt-loss> ] [ <pkt-loss-per> ] [ <pkt-loss-min> ] [ <pkt-loss-max> ] [ <pkt-loss-inter-min> ] [ <pkt-loss-inter-max> ] [ <inter-jitter-out> ] [ <inter-jitter-in> ] [ <jitter-avg> ] [ <pkt-loss-sd> ] [ <pkt-loss-sd-per> ] [ <pkt-loss-sd-min> ] [ <pkt-loss-sd-max> ] [ <pkt-loss-sd-inter-min> ] [ <pkt-loss-sd-inter-max> ] [ <pkt-loss-ds> ] [ <pkt-loss-ds-per> ] [ <pkt-loss-ds-min> ] [ <pkt-loss-ds-max> ] [ <pkt-loss-ds-inter-min> ] [ <pkt-loss-ds-inter-max> ] [ <pkt-oos> ] [ <pkt-oos-sd> ] [ <pkt-oos-ds> ] [ <pkt-oos-both> ] [ <pkt-mia> ] [ <pkt-late> ] [ <pkt-skipped> ] [ <voice-icpif> ] [ <voice-mos> ] [ <dnobs> ] [ <dmam> ] [ <dtoo> ] [ <dmin> ] [ <dmax> ] [ <pnobs> ] [ <pmam> ] [ <ptoo> ] [ <pmin> ] [ <pmax> ] [ <nnobs> ] [ <nmam> ] [ <ntoo> ] [ <nmin> ] [ <nmax> ] [ <outstring1> ] [ <outstring2> ] [ <nos> ] [ <nof> ] [ <noot> ] [ <nofo1> ] [ <nofo2> ] [ { TABLE_br [ <br> ] [ <avg-lat> ] [ <potc> ] [ <noc-by-lat> ] [ <sortthigh-by-low> ] [ <operot> ] } ] } ] [ <life-left> ] [ <oper-state> ] [ <reset-time> ] [ <nob> ] [ <bbh> ] [ <bbv> ] } ] ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

statistics

IP SLAs Statistics

entry-num

(Optional) Entry Number

details

(Optional) Detailed Output

aggregated

(Optional) IP SLAs Statistics Aggregated

__readonly__

(Optional)

print_type

(Optional)

TABLE_stats

(Optional) Show ip sla statistics information

index

(Optional)

top

(Optional)

TABLE_detail

(Optional) Show ip sla statistics detail information

sti

(Optional)

operation-type

(Optional)

MINICPIF

(Optional)

MAXICPIF

(Optional)

MINMOS

(Optional)

MAXMOS

(Optional)

update-count

(Optional)

micro-accuracy

(Optional)

nano-accuracy

(Optional)

latest-RTT

(Optional)

latest-return-code

(Optional)

latest-start-time

(Optional)

http-dns-rtt

(Optional)

http-tcp-rtt

(Optional)

http-ttfb

(Optional)

http-rtt

(Optional)

http-status

(Optional)

http-recvlen

(Optional)

http-bodysize

(Optional)

http-dns-timeout

(Optional)

http-tcp-timeout

(Optional)

http-t-timeout

(Optional)

http-dns-error

(Optional)

http-tcp-error

(Optional)

http-t-error

(Optional)

ntp-sync-state

(Optional)

rtt-count

(Optional)

rtt-min

(Optional)

rtt-avg

(Optional)

rtt-max

(Optional)

lat-ow-samples

(Optional)

sd-lat-ow-min

(Optional)

sd-lat-ow-avg

(Optional)

sd-lat-ow-max

(Optional)

ds-lat-ow-min

(Optional)

ds-lat-ow-avg

(Optional)

ds-lat-ow-max

(Optional)

sd-lat-sum

(Optional)

sd-lat-sum2

(Optional)

ds-lat-sum

(Optional)

ds-lat-sum2

(Optional)

sd-jitter-count

(Optional)

ds-jitter-count

(Optional)

sd-jitter-min

(Optional)

sd-jitter-avg

(Optional)

sd-jitter-max

(Optional)

ds-jitter-min

(Optional)

ds-jitter-avg

(Optional)

ds-jitter-max

(Optional)

sd-pos-jitter-min

(Optional)

sd-pos-jitter-avg

(Optional)

sd-pos-jitter-max

(Optional)

sd-pos-jitter-num

(Optional)

sd-pos-jitter-sum

(Optional)

sd-pos-jitter-sum2

(Optional)

sd-neg-jitter-min

(Optional)

sd-neg-jitter-avg

(Optional)

sd-neg-jitter-max

(Optional)

sd-neg-jitter-num

(Optional)

sd-neg-jitter-sum

(Optional)

sd-neg-jitter-sum2

(Optional)

ds-pos-jitter-min

(Optional)

ds-pos-jitter-avg

(Optional)

ds-pos-jitter-max

(Optional)

ds-pos-jitter-num

(Optional)

ds-pos-jitter-sum

(Optional)

ds-pos-jitter-sum2

(Optional)

ds-neg-jitter-min

(Optional)

ds-neg-jitter-avg

(Optional)

ds-neg-jitter-max

(Optional)

ds-neg-jitter-num

(Optional)

ds-neg-jitter-sum

(Optional)

ds-neg-jitter-sum2

(Optional)

pkt-unprocessed

(Optional)

pkt-loss

(Optional)

pkt-loss-per

(Optional)

pkt-loss-min

(Optional)

pkt-loss-max

(Optional)

pkt-loss-inter-min

(Optional)

pkt-loss-inter-max

(Optional)

inter-jitter-out

(Optional)

inter-jitter-in

(Optional)

jitter-avg

(Optional)

pkt-loss-sd

(Optional)

pkt-loss-sd-per

(Optional)

pkt-loss-sd-min

(Optional)

pkt-loss-sd-max

(Optional)

pkt-loss-sd-inter-min

(Optional)

pkt-loss-sd-inter-max

(Optional)

pkt-loss-ds

(Optional)

pkt-loss-ds-per

(Optional)

pkt-loss-ds-min

(Optional)

pkt-loss-ds-max

(Optional)

pkt-loss-ds-inter-min

(Optional)

pkt-loss-ds-inter-max

(Optional)

pkt-oos

(Optional)

pkt-oos-sd

(Optional)

pkt-oos-ds

(Optional)

pkt-oos-both

(Optional)

pkt-mia

(Optional)

pkt-late

(Optional)

pkt-skipped

(Optional)

voice-icpif

(Optional)

voice-mos

(Optional)

dnobs

(Optional)

dmam

(Optional)

dtoo

(Optional)

dmin

(Optional)

dmax

(Optional)

pnobs

(Optional)

pmam

(Optional)

ptoo

(Optional)

pmin

(Optional)

pmax

(Optional)

nnobs

(Optional)

nmam

(Optional)

ntoo

(Optional)

nmin

(Optional)

nmax

(Optional)

outstring1

(Optional)

outstring2

(Optional)

nos

(Optional)

nof

(Optional)

noot

(Optional)

nofo1

(Optional)

nofo2

(Optional)

TABLE_br

(Optional) Bin range related info

br

(Optional)

avg-lat

(Optional)

potc

(Optional)

noc-by-lat

(Optional)

sortthigh-by-low

(Optional)

operot

(Optional)

life-left

(Optional)

oper-state

(Optional)

reset-time

(Optional)

nob

(Optional)

bbh

(Optional)

bbv

(Optional)

Command Mode

- /exec

show ip sla twamp connection detail

show ip sla twamp connection detail [ __readonly__ [ { TABLE_twamp-connection-detail <Connection-Id> <Client-Addr> <Client-Port> <Client-VRF> <Mode> <Connection-state> <Control-state> <Number-Of-Test-requests> } ] ]

Syntax Description

show

ip

sla

twamp

connection

detail

__readonly__

(Optional)

TABLE_twamp-connection-detail

(Optional) connection related info

Connection-Id

(Optional)

Client-Addr

(Optional)

Client-Port

(Optional)

Client-VRF

(Optional)

Mode

(Optional)

Connection-state

(Optional)

Control-state

(Optional)

Number-Of-Test-requests

(Optional)

Command Mode

- /exec

show ip sla twamp connection requests

show ip sla twamp connection requests [ __readonly__ [ { TABLE_twamp-connection-request <Connection-Id> <Client-Addr> <Client-Port> <Client-VRF> } ] [ <Total-Connections> ] ]

Syntax Description

show

ip

sla

twamp

connection

requests

__readonly__

(Optional)

TABLE_twamp-connection-request

(Optional) connection requests related info

Connection-Id

(Optional)

Client-Addr

(Optional)

Client-Port

(Optional)

Client-VRF

(Optional)

Total-Connections

(Optional)

Command Mode

- /exec

show ip sla twamp session

show ip sla twamp session [ __readonly__ <twamp-resp-status> [ { TABLE_twamp-session [ <recv-addr> ] [ <recv-port> ] [ <send-addr> ] [ <send-port> ] [ <send-vrf> ] [ <sess-id> ] [ <conn-id> ] } ] ]

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

twamp

IP SLAs Twamp Information

session

Display TWAMP Sessions

__readonly__

(Optional)

twamp-resp-status

(Optional)

TABLE_twamp-session

(Optional) session related information

recv-addr

(Optional)

recv-port

(Optional)

send-addr

(Optional)

send-port

(Optional)

send-vrf

(Optional)

sess-id

(Optional)

conn-id

(Optional)

Command Mode

- /exec

show ip sla twamp standards

show ip sla twamp standards [ __readonly__ [ { TABLE_twamp-standards <twamp-standard-feature> <twamp-standard-org> <twamp-standard> } ] ]

Syntax Description

show

ip

sla

twamp

standards

__readonly__

(Optional)

TABLE_twamp-standards

(Optional) twamp standards for each supported feature

twamp-standard-feature

(Optional)

twamp-standard-org

(Optional)

twamp-standard

(Optional)

Command Mode

- /exec

show ip ssh source-interface

show ip ssh source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_ipsshvrf <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ssh

Display SSH client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ipsshvrf

(Optional) source interface of ssh given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip ssh source-interface vrf all

show ip ssh source-interface vrf all [ __readonly__ [ { TABLE_ipssh <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

ssh

Display SSH client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_ipssh

(Optional) source interface of ssh

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip static-route

show ip static-route [ multicast ] [ internal ] [ track-table ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <count> <unres-count> ] [ TABLE_vrf_all { <cntxt_name> <cntxt_id> [ TABLE_each_vrf { <prefix_addr_msk> <nhop_addr_msk> <nhop_vrf_info> <nhop_intr_info> <urib_stat> [ <seg_id> ] [ <tunnel_id> <urib_encap_type> ] [ <nhop_urib_stat> ] [ <track_obj_num> <track_obj_state> ] } ] } ] [ TABLE_multicast <multicast> ] [ TABLE_track-table ] [ TABLE_route <prefix> <masklen> <nhop> <nhop-masklen> <intf> <real-nhop> <iod> <pref> <tag> <unres> ] ]

Syntax Description

show

Show running system information

ip

Display IP information

static-route

Display configured static routes

multicast

(Optional) Display only multicast routes

internal

(Optional) Display internal data structure info

track-table

(Optional) Display track object details associated with static routes

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_vrf_all

(Optional)

cntxt_name

(Optional)

cntxt_id

(Optional)

TABLE_each_vrf

(Optional)

prefix_addr_msk

(Optional)

nhop_addr_msk

(Optional)

nhop_vrf_info

(Optional)

nhop_intr_info

(Optional)

urib_stat

(Optional)

seg_id

(Optional)

tunnel_id

(Optional)

urib_encap_type

(Optional)

nhop_urib_stat

(Optional)

track_obj_num

(Optional)

track_obj_state

(Optional)

TABLE_multicast

(Optional)

multicast

(Optional)

TABLE_track-table

(Optional)

TABLE_route

(Optional)

prefix

(Optional)

masklen

(Optional)

nhop

(Optional)

nhop-masklen

(Optional)

intf

(Optional)

real-nhop

(Optional)

iod

(Optional)

pref

(Optional)

tag

(Optional)

unres

(Optional)

count

(Optional)

unres-count

(Optional)

Command Mode

- /exec

show ip stats

show ip stats

Syntax Description

show

Show running system information

ip

Display IP information

stats

Display IP internal stats

Command Mode

- /exec

show ip tcp mss

show ip tcp mss

Syntax Description

show

Show running system information

ip

Configure IP features

tcp

Global TCP parameters

mss

Maximum segment size for TCP connections in bytes

Command Mode

- /exec

show ip telnet source-interface

show ip telnet source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_iptelnetvrf <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

telnet

Display telnet information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_iptelnetvrf

(Optional) source interface of telnet given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip telnet source-interface vrf all

show ip telnet source-interface vrf all [ __readonly__ [ { TABLE_iptelnet <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

telnet

Display telnet information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_iptelnet

(Optional) source interface of telnet

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip tftp source-interface

show ip tftp source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_iptftpvrf <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

tftp

Display TFTP client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_iptftpvrf

(Optional) source interface of tftp given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip tftp source-interface vrf all

show ip tftp source-interface vrf all [ __readonly__ [ { TABLE_iptftp <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

tftp

Display TFTP client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_iptftp

(Optional) source interface of tftp

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip traceroute source-interface

show ip traceroute source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_iptraceroutevrf <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

traceroute

Display traceroute client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_iptraceroutevrf

(Optional) source interface of traceroute

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip traceroute source-interface vrf all

show ip traceroute source-interface vrf all [ __readonly__ [ { TABLE_iptraceroute <vrfname> <ifname> } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

traceroute

Display traceroute client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_iptraceroute

(Optional) source interface of traceroute

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip traffic

show ip traffic [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_vrf [ <vrf-name-out> ] } ] [ { TABLE_ip_soft_processed_traffic [ { TABLE_trans_and_reception [ <rcvd> ] [ <sent> ] [ <consumed> ] [ <fwd-ucast> ] [ <fwd-mcast> ] [ <fwd-label> ] [ <ingress-mcecfrwd> ] } ] [ { TABLE_opts [ <opts-end> ] [ <opts-nop> ] [ <opts-bsec> ] [ <opts-loosesrc-route> ] [ <opts-timestamp> ] [ <opts-esec> ] [ <opts-record-route> ] [ <opts-stid> ] [ <opts-strsrc-route> ] [ <opts-alert> ] [ <opts-cipso> ] [ <opts-ump> ] [ <opts-other> ] } ] [ { TABLE_errors [ <bad-csum> ] [ <too-small> ] [ <bad-ver> ] [ <bad-hlen> ] [ <bad-len> ] [ <bad-dest> ] [ <bad-ttl> ] [ <cant-fwd> ] [ <out-drop> ] [ <bad-encap> ] [ <no-route> ] [ <no-proto> ] [ <bad-options> ] [ <vinci> ] [ <snoop> ] [ <svi> ] [ <restart-recovery> ] [ <mbuf-fail> ] [ <bad-context> ] [ <rpf-drops> ] [ <bad-gw-mac> ] [ <ing-ips-option-fail> ] [ <nat-in-drop> ] [ <nat-out-drop> ] [ <ing-option-proc-fail> ] [ <ing-mfrwd-fail> ] [ <ing-lisp-drop> ] [ <ing-lisp-decap-drop> ] [ <ing-lisp-encap-drop> ] [ <ing-lisp-encap> ] [ <ing-mfwd-copy-drop> ] [ <ing-ra-reass-drop> ] [ <ing-icmp-redirect> ] [ <ing-drop-ifmgr-init> ] [ <ing-drop-invld-filter> ] [ <ing-drop-invld-l2-msg> ] [ <ingress> ] [ <egrees> ] [ <directed_bdcast> ] } ] [ { TABLE_fragment [ <frag> ] [ <fragmented> ] [ <out-frag> ] [ <frag-drop> ] [ <cant-frag> ] [ <reasm> ] [ <frag-to> ] } ] } ] [ { TABLE_icmp_software_proc_traffic [ { TABLE_transmission [ <tx-redir> ] [ <tx-unreach> ] [ <tx-echo-req> ] [ <tx-echo-reply> ] [ <tx-mask-req> ] [ <tx-mask-rep> ] [ <tx-info-req> ] [ <tx-info-reply> ] [ <tx-param-prob> ] [ <tx-source-quench> ] [ <tx-tstamp-req> ] [ <tx-tstamp-reply> ] [ <tx-time-exceeded> ] [ <tx-router-solicit> ] [ <tx-router-advert> ] [ <out-drop-badlen> ] [ <encap-fail> ] [ <xmit-fail> ] [ <icmp-orginate> ] [ <redirect-orginate-req> ] [ <orginate-deny> ] [ <short-ip> ] [ <old-icmp> ] [ <error-drop> ] } ] [ { TABLE_reception [ <rx-redir> ] [ <rx-unreach> ] [ <rx-echo-req> ] [ <rx-echo-reply> ] [ <rx-mask-req> ] [ <rx-mask-rep> ] [ <rx-info-req> ] [ <rx-info-reply> ] [ <rx-param-prob> ] [ <rx-source-quench> ] [ <rx-tstamp-req> ] [ <rx-tstamp-reply> ] [ <rx-time-exceeded> ] [ <rx-router-solicit> ] [ <rx-router-advert> ] [ <rx-format-errors> ] [ <rx-csum-errors> ] [ <lisp-processed> ] [ <lisp-noclient> ] [ <lisp-consumed> ] [ <icmp-replies> ] [ <icmp-reply-drop> ] [ <icmp-inactive-addr> ] } ] [ { TABLE_stat_last_never [ <stat-last-never> ] } ] } ] [ { TABLE_rfc4293_ip_soft_proc_traffic [ { TABLE_rfc_reception [ <inrcv> ] [ <inoctet> ] [ <inhdrerr> ] [ <innoroutes> ] [ <inaddrerr> ] [ <innoproto> ] [ <intruncated> ] [ <inforw> ] [ <reasmreqds> ] [ <reasmoks> ] [ <reasmfails> ] [ <indiscards> ] [ <indelivers> ] [ <inmcastpkts> ] [ <inmcastbytes> ] [ <inbastpkts> ] } ] [ { TABLE_rfc_transmission [ <out-req> ] [ <out-no-route> ] [ <out-forwdgrams> ] [ <out-discards> ] [ <out-frag-req> ] [ <out-frag-oks> ] [ <out-frag-fails> ] [ <out-frag-create> ] [ <out-transmits> ] [ <byte-sent> ] [ <out-mcast-pkts> ] [ <out-mcast-bytes> ] [ <out-bcast-pkts> ] [ <out-bcast-bytes> ] } ] } ] ]

Syntax Description

show

Show running system information

ip

Display IP information

traffic

Display IP software processed traffic statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_ip_soft_processed_traffic

(Optional)

TABLE_trans_and_reception

(Optional)

rcvd

(Optional)

sent

(Optional)

consumed

(Optional)

fwd-ucast

(Optional)

fwd-mcast

(Optional)

fwd-label

(Optional)

ingress-mcecfrwd

(Optional)

TABLE_opts

(Optional)

opts-end

(Optional)

opts-nop

(Optional)

opts-bsec

(Optional)

opts-loosesrc-route

(Optional)

opts-timestamp

(Optional)

opts-esec

(Optional)

opts-record-route

(Optional)

opts-ump

(Optional)

opts-stid

(Optional)

opts-strsrc-route

(Optional)

opts-alert

(Optional)

opts-cipso

(Optional)

opts-other

(Optional)

TABLE_errors

(Optional)

bad-csum

(Optional)

too-small

(Optional)

bad-ver

(Optional)

bad-hlen

(Optional)

bad-len

(Optional)

bad-dest

(Optional)

bad-ttl

(Optional)

cant-fwd

(Optional)

out-drop

(Optional)

bad-encap

(Optional)

no-route

(Optional)

no-proto

(Optional)

bad-options

(Optional)

vinci

(Optional)

snoop

(Optional)

svi

(Optional)

restart-recovery

(Optional)

mbuf-fail

(Optional)

bad-context

(Optional)

rpf-drops

(Optional)

bad-gw-mac

(Optional)

ing-ips-option-fail

(Optional)

nat-in-drop

(Optional)

nat-out-drop

(Optional)

ing-option-proc-fail

(Optional)

ing-mfrwd-fail

(Optional)

ing-lisp-drop

(Optional)

ing-lisp-decap-drop

(Optional)

ing-lisp-encap-drop

(Optional)

ing-lisp-encap

(Optional)

ing-mfwd-copy-drop

(Optional)

ing-ra-reass-drop

(Optional)

ing-icmp-redirect

(Optional)

ing-drop-ifmgr-init

(Optional)

ing-drop-invld-filter

(Optional)

ing-drop-invld-l2-msg

(Optional)

ingress

(Optional)

egrees

(Optional)

directed_bdcast

(Optional)

TABLE_fragment

(Optional)

frag

(Optional)

fragmented

(Optional)

out-frag

(Optional)

frag-drop

(Optional)

cant-frag

(Optional)

reasm

(Optional)

frag-to

(Optional)

TABLE_icmp_software_proc_traffic

(Optional)

TABLE_transmission

(Optional)

tx-redir

(Optional)

tx-unreach

(Optional)

tx-echo-req

(Optional)

tx-echo-reply

(Optional)

tx-mask-req

(Optional)

tx-mask-rep

(Optional)

tx-info-req

(Optional)

tx-info-reply

(Optional)

tx-param-prob

(Optional)

tx-source-quench

(Optional)

tx-tstamp-req

(Optional)

tx-tstamp-reply

(Optional)

tx-time-exceeded

(Optional)

tx-router-solicit

(Optional)

tx-router-advert

(Optional)

out-drop-badlen

(Optional)

encap-fail

(Optional)

xmit-fail

(Optional)

icmp-orginate

(Optional)

redirect-orginate-req

(Optional)

orginate-deny

(Optional)

short-ip

(Optional)

old-icmp

(Optional)

error-drop

(Optional)

TABLE_reception

(Optional)

rx-redir

(Optional)

rx-unreach

(Optional)

rx-echo-req

(Optional)

rx-echo-reply

(Optional)

rx-mask-req

(Optional)

rx-mask-rep

(Optional)

rx-info-req

(Optional)

rx-info-reply

(Optional)

rx-param-prob

(Optional)

rx-source-quench

(Optional)

rx-tstamp-req

(Optional)

rx-tstamp-reply

(Optional)

rx-time-exceeded

(Optional)

rx-router-solicit

(Optional)

rx-router-advert

(Optional)

rx-format-errors

(Optional)

rx-csum-errors

(Optional)

lisp-processed

(Optional)

lisp-noclient

(Optional)

lisp-consumed

(Optional)

icmp-replies

(Optional)

icmp-reply-drop

(Optional)

icmp-inactive-addr

(Optional)

TABLE_stat_last_never

(Optional)

stat-last-never

(Optional)

TABLE_rfc4293_ip_soft_proc_traffic

(Optional)

TABLE_rfc_reception

(Optional)

inrcv

(Optional)

inoctet

(Optional)

inhdrerr

(Optional)

innoroutes

(Optional)

inaddrerr

(Optional)

innoproto

(Optional)

intruncated

(Optional)

inforw

(Optional)

reasmreqds

(Optional)

reasmoks

(Optional)

reasmfails

(Optional)

indiscards

(Optional)

indelivers

(Optional)

inmcastpkts

(Optional)

inmcastbytes

(Optional)

inbastpkts

(Optional)

TABLE_rfc_transmission

(Optional)

out-req

(Optional)

out-no-route

(Optional)

out-forwdgrams

(Optional)

out-discards

(Optional)

out-frag-req

(Optional)

out-frag-oks

(Optional)

out-frag-fails

(Optional)

out-frag-create

(Optional)

out-transmits

(Optional)

byte-sent

(Optional)

out-mcast-pkts

(Optional)

out-mcast-bytes

(Optional)

out-bcast-pkts

(Optional)

out-bcast-bytes

(Optional)

Command Mode

- /exec

show ip txlist list

show ip txlist { list | member }

Syntax Description

show

Show running system information

ip

Display IP information

txlist

Display IP txlist information

list

Display IP txlist main linkage

member

Display IP txlist active member linkage

Command Mode

- /exec

show ip udp relay

show ip udp relay [ __readonly__ [ <udp_relay_service_enable> <udp_relay_hdr> TABLE_default_ports <port_name> <udp_relay_port_enable> ] [ <udp_ports_hdr> TABLE_ports <udp_port_num> ] [ <udp_intf_hdr> TABLE_intf <udp_intf_idx> <udp_sub_bcast> <udp_objgrp> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

udp

Show items in UDP relay

relay

UDP relay

__readonly__

(Optional) Read only

udp_relay_service_enable

(Optional)

udp_relay_hdr

(Optional)

TABLE_default_ports

(Optional)

port_name

(Optional) UDP Port Name

udp_relay_port_enable

(Optional)

udp_ports_hdr

(Optional)

TABLE_ports

(Optional)

udp_port_num

(Optional)

udp_intf_hdr

(Optional)

TABLE_intf

(Optional)

udp_intf_idx

(Optional) UDP relay interfaces

udp_sub_bcast

(Optional)

udp_objgrp

(Optional) Object-group

Command Mode

- /exec

show ip udp relay interface

show ip udp relay interface [ <intf_range> ] [ __readonly__ <udp_intf_hdr> [ TABLE_intf <udp_intf_idx> <udp_sub_bcast> <udp_objgrp> ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

udp

Show items in UDP relay

relay

UDP relay

interface

Interface ID

intf_range

(Optional) interface

__readonly__

(Optional) Read only

udp_intf_hdr

(Optional)

TABLE_intf

(Optional)

udp_intf_idx

(Optional) UDP relay interfaces

udp_sub_bcast

(Optional)

udp_objgrp

(Optional) Object-group

Command Mode

- /exec

show ip udp relay object-group

show ip udp relay object-group [ <obj-grp-name> ] [ __readonly__ [ TABLE_objgrp_list [ <udp_objgrp> ] [ TABLE_objgrp [ <host_addr> ] [ <net_addr> <net_mask> ] [ <prefix_addr> <prefix_len> ] ] <udp_intf_hdr> [ TABLE_intf <udp_intf_idx> ] ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

udp

Show items in UDP relay

relay

UDP relay

object-group

Object-group

obj-grp-name

(Optional) object-group name

__readonly__

(Optional) Read only

TABLE_objgrp_list

(Optional)

udp_objgrp

(Optional) Object-group

TABLE_objgrp

(Optional)

host_addr

(Optional) Host Address

net_addr

(Optional) Network Address

net_mask

(Optional) Network Mask

prefix_addr

(Optional) Network Address

prefix_len

(Optional) IP Prefix Length

udp_intf_hdr

(Optional)

TABLE_intf

(Optional)

udp_intf_idx

(Optional) UDP relay interfaces

Command Mode

- /exec

show ip verify source

show ip verify source [ interface <intf6> ] [ __readonly__ <verify_ipsg_exclude_vlans> [ <verify_hdr> ] [ <verify_intf_ipsg_val> | <verify_ipsg_enable_intfs> ] [ { TABLE_verify_entry <verify_intf> <verify_intf_ipsg_val> [ { TABLE_verify_entry_intfs <verify_ipsg_enable_intfs> } ] <verify_filter_mode> <verify_ip_addr> <verify_mac_addr> <verify_vlan> } ] ]

Syntax Description

show

Show running system information

ip

Show the IP features of the system

verify

Verify IPSG information

source

IPSG source

interface

(Optional) Interface

intf6

(Optional) interface

__readonly__

(Optional) Read only

verify_ipsg_exclude_vlans

(Optional)

verify_hdr

(Optional) IP source guard operational entries

verify_intf_ipsg_val

(Optional) IP source guard value (enabled or disable)

verify_ipsg_enable_intfs

(Optional) IP source guard enabled interfaces names

TABLE_verify_entry

(Optional)

verify_filter_mode

(Optional)

verify_intf

(Optional)

TABLE_verify_entry_intfs

(Optional)

verify_ip_addr

(Optional) verify ip address

verify_mac_addr

(Optional) verify mac address

verify_vlan

(Optional) vlan for interface

Command Mode

- /exec

show ipv6 adjacency

show ipv6 { adjacency | neighbor } [ <interface> [ summary ] | <ipv6-addr> [ detail ] | detail | summary | non-best | [ throttle ] statistics ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <invalid_pkt_cnt> ] [ <invalid_byte_cnt> ] [ <global_drop_pkt_cnt> ] [ <global_drop_byte_cnt> ] [ <global_punt_pkt_cnt> ] [ <global_punt_byte_cnt> ] [ <global_glean_pkt_cnt> ] [ <global_glean_byte_cnt> ] [ <glean_pkt_cnt> ] [ <glean_byte_cnt> ] [ <normal_pkt_cnt> ] [ <normal_byte_cnt> ] [ <last_updated> ] [ <count-static> ] [ <count-dynamic> ] [ <count-others> ] [ <count-throttle> ] [ <count-total> ] [ TABLE_vrf <vrf-name-out> [ TABLE_afi <afi> <count> [ TABLE_adj <intf-out> <ipv6-addr> [ <phy-intf> ] <time-stamp> <mac> <pref> <owner> [ <pkt-count> ] [ <byte-count> ] [ <is-best> ] [ <is-thrtld> ] ] ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

adjacency

Display adjacency table

neighbor

Show IPv6 neighbor entry

interface

(Optional) Display specific interface adjacencies only

detail

(Optional) Show detail information of adjacency entries

summary

(Optional) Show adjacency summary

non-best

(Optional) Show both best/non-best entries

throttle

(Optional) Throttle

statistics

(Optional) Show adjacency statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Show adjacency entries for all vrfs

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name-out

(Optional) VRF name

invalid_pkt_cnt

(Optional) Invalid packet count

invalid_byte_cnt

(Optional) Invalid byte count

global_drop_pkt_cnt

(Optional) Global drop packet count

global_drop_byte_cnt

(Optional) Global drop byte count

global_punt_pkt_cnt

(Optional) Global punt packet count

global_punt_byte_cnt

(Optional) Global punt byte count

global_glean_pkt_cnt

(Optional) Global glean packet count

global_glean_byte_cnt

(Optional) Global glean byte count

glean_pkt_cnt

(Optional) Glean packet count

glean_byte_cnt

(Optional) Glean byte count

normal_pkt_cnt

(Optional) Packet count

normal_byte_cnt

(Optional) Byte count

last_updated

(Optional) Lat updated

count-static

(Optional) Static count

count-dynamic

(Optional) Dynamic count

count-others

(Optional) Others count

count-throttle

(Optional) Throttled count

count-total

(Optional) Total count

TABLE_afi

(Optional) AFI table

afi

(Optional) AFI

count

(Optional) Count

TABLE_adj

(Optional) Adjacency table for IPV6

intf-out

(Optional) Interface

phy-intf

(Optional) Physical interface

time-stamp

(Optional) Age

mac

(Optional) MAC address

pref

(Optional) Preference

owner

(Optional) Owner

pkt-count

(Optional) Packet count

byte-count

(Optional) Byte count

is-best

(Optional) Best

is-thrtld

(Optional) Throttled

Command Mode

- /exec

show ipv6 amt tunnel

show ipv6 amt tunnel [ <address6> <port> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <tc6> { TABLE_tunnel <gwa> <gwp> <ut> <ld> <lr> <rc> <exp> { TABLE_route <source> <group> <rexp> } } ]

Syntax Description

show

Show running system information

amt

AMT show commands

ipv6

Display IPv6 information

tunnel

Display tunnel information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

port

(Optional) UDP port number of gateway

detail

(Optional) Display routes joined by tunnel endpoint

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

tc6

(Optional)

TABLE_tunnel

(Optional)

gwa

(Optional)

gwp

(Optional)

ut

(Optional)

ld

(Optional)

lr

(Optional)

rc

(Optional)

exp

(Optional)

TABLE_route

(Optional)

source

(Optional)

group

(Optional)

rexp

(Optional)

Command Mode

- /exec

show ipv6 bgp

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { rib-install | rib-uninstall | rib-pending } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv6

Display BGP information for IPv6 address family

rib-install

Routes installed in RIB

rib-uninstall

Routes not installed in RIB

rib-pending

Routes not acknowledged by RIB

Command Mode

- /exec

show ipv6 bgp

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ <ipv6-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

longer-prefixes

(Optional) Display route and more specific routes

Command Mode

- /exec

show ipv6 bgp

show ipv6 { bgp | mbgp } { route-map { <rmap-name> | <rmap-name> } | prefix-list { <prfxlist-name> | <test_pol_name> } | filter-list { <fltrlist-name> | <test_pol_name> } | community-list { <commlist-name> | <test_pol_name> } | extcommunity-list { <extcommlist-name> | <test_pol_name> } [ exact-match ] }

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

route-map

Display routes matching the route-map

rmap-name

Route-map name

rmap-name

Known route-map name

prefix-list

Display routes matching the prefix-list

prfxlist-name

Name of prefix-list

filter-list

Display routes matching the filter-list

fltrlist-name

Name of filter-list

community-list

Display routes matching the community-list

commlist-name

Name of community-list

extcommunity-list

Display routes matching the extcommunity-list

extcommlist-name

Name of extcommunity-list

test_pol_name

An existing test-list policy

exact-match

(Optional) Exact match of the communities

Command Mode

- /exec

show ipv6 bgp community

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] community { <regexp-str> | { { <comm-id> | <wellknown-id> } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

ipv6

Display BGP information for IPv6 address family

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

community

Display routes matching the BGP communities

regexp-str

Regular expression to match the communities

comm-id

BGP community value

wellknown-id

BGP wellknown community

exact-match

(Optional) Exact match of the communities

Command Mode

- /exec

show ipv6 bgp dampening

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] dampening { dampened-paths [ regexp <regexp-str> ] | history-paths [ regexp <regexp-str> ] | parameters | flap-statistics } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampening

Display dampening info

parameters

Display dampening parameters

dampened-paths

Display all dampened paths

history-paths

Display all history paths

flap-statistics

Display flap statistics for routes

ipv6

Display BGP information for IPv6 address family

regexp

(Optional) Display routes matching the AS path regular expression

regexp-str

(Optional) Regular expression to match the AS paths

Command Mode

- /exec

show ipv6 bgp extcommunity

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] extcommunity { <regexp-str> | { { 4byteas-generic { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

extcommunity

Display routes matching the BGP extcommunities

4byteas-generic

Generic extended community

transitive

Transitive extcommunity

non-transitive

Non-Transitive extcommunity

regexp-str

Regular expression to match the extcommunities

ext-comm-gen-trans

Extcommunity number aa4:nn format

ext-comm-gen-nontrans

Extcommunity number aa4:nn format

exact-match

(Optional) Exact match of the extcommunities

Command Mode

- /exec

show ipv6 bgp flap-statistics

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] flap-statistics [ <ipv6-prefix> ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

flap-statistics

Display route flap statistics

ipv6

Display BGP information for IPv6 address family

Command Mode

- /exec

show ipv6 bgp neighbors

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] neighbors { [ { <neighbor-id> | <ipv6-neighbor-id> } [ routes [ advertised | received | dampened ] | advertised-routes | paths | received-routes | flap-statistics ] ] | <neighbor-prefix-id> | <ipv6-neighbor-prefix-id> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

neighbors

Display all configured BGP neighbors

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbor-id

(Optional) Display one particular BGP neighbor

neighbor-prefix-id

Display details for a prefix peering

ipv6

Display BGP information for IPv6 address family

routes

(Optional) Display all routes advertised/received to/from peer

advertised

(Optional) Display all routes advertised to this peer

received

(Optional) Display all routes received from this peer

dampened

(Optional) Display all dampened routes received from this peer

advertised-routes

(Optional) Display all the routes advertised to this peer

received-routes

(Optional) Display all the routes received from this peer

flap-statistics

(Optional) Display flap statistics for routes received from this peer

paths

(Optional) Display AS paths learned from this peer

Command Mode

- /exec

show ipv6 bgp nexthop-database

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] nexthop-database [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

nexthop-database

Display nexthop database

ipv6

Display BGP information for IPv6 address family

Command Mode

- /exec

show ipv6 bgp nexthop

show ipv6 { bgp | mbgp } nexthop <ipv6nexthop>

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

nexthop

Display routes matching the nexthop

Command Mode

- /exec

show ipv6 bgp received-paths

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] received-paths [ private ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

received-paths

Display paths stored for soft-reconfig

private

(Optional) private

Command Mode

- /exec

show ipv6 bgp regexp

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] regexp <regexp-str> [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv6

Display BGP information for IPv6 address family

regexp

Display routes matching the AS path regular expression

regexp-str

Regular expression to match the AS paths

Command Mode

- /exec

show ipv6 bgp summary

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] summary [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

summary

Display summarized information of BGP state

ipv6

Display BGP information for IPv6 address family

Command Mode

- /exec

show ipv6 cache

show ipv6 cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

cache

Display ipv6 cache

interface

Display ipv6 related interface information

brief

Display summary of ipv6 interface status and configuration

detail

Display detailed information of ipv6 interface status and configuration

operational

(Optional) Display only interfaces that are administratively enabled

intf

(Optional) Interface name to display

Command Mode

- /exec

show ipv6 client

show ipv6 client [ <client-name> ] [ __readonly__ { TABLE_ipv6_client { <cli-name> <cli-stat> <cli-pid> <cli-ext-pid> [ <protocol> ] <pib-index> <cli-uuid> <rou-vrf> <rou-flg> <ctrl-sap> <data-sap> <ipc-ctrl-mq> <ipc-ctrl-fail> <ipc-data-mq> <ipc-data-fail> [ <if-ext-ind> ] [ <recv-fn> <recv-hex> ] } } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

client

Display clients registered with the IPv6 process

client-name

(Optional) Display information for a single IPv6 client

__readonly__

(Optional)

TABLE_ipv6_client

(Optional) IPV6 client table

cli-name

(Optional) client name

cli-stat

(Optional) client state

cli-pid

(Optional) client pid

cli-ext-pid

(Optional) client ext-pid

protocol

(Optional) ipv6 client protocol

pib-index

(Optional) client pib-index

cli-uuid

(Optional) client uuid

rou-vrf

(Optional) client route vrf

rou-flg

(Optional) client route flag

ctrl-sap

(Optional) client control sap

data-sap

(Optional) client data sap

ipc-ctrl-mq

(Optional) client ipc control meassage queue

ipc-ctrl-fail

(Optional) client ipc control fail

ipc-data-mq

(Optional) client ipc data message queue

ipc-data-fail

(Optional) client ipc data fail

if-ext-ind

(Optional) client if ext indes

recv-fn

(Optional) client receive fn name

recv-hex

(Optional) receive-hexadecimal address

Command Mode

- /exec

show ipv6 dhcp-ldra

show ipv6 dhcp-ldra [ __readonly__ <ldra_gbl_enable> [ <cli_fac_disable_hdr> TABLE_intf_entry_cli_fac_disable <cli_fac_disable_intf> ] [ <cli_fac_trusted_hdr> TABLE_intf_entry_cli_fac_trusted <cli_fac_trusted_intf> ] [ <cli_fac_untrusted_hdr> TABLE_intf_entry_cli_fac_untrusted <cli_fac_untrusted_intf> ] [ <srv_fac_hdr> TABLE_intf_entry_srv_fac <srv_fac_intf> ] ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

dhcp-ldra

Show DHCPv6 LDRA

__readonly__

(Optional) Read only

ldra_gbl_enable

(Optional) is DHCPv6 LDRA service enabled

cli_fac_disable_hdr

(Optional) DHCPv6 LDRA policy client-facing-disable

TABLE_intf_entry_cli_fac_disable

(Optional)

cli_fac_disable_intf

(Optional) DHCPv6 LDRA policy client-facing-disable interfaces

cli_fac_trusted_hdr

(Optional) DHCPv6 LDRA policy client-facing-trusted

TABLE_intf_entry_cli_fac_trusted

(Optional)

cli_fac_trusted_intf

(Optional) DHCPv6 LDRA policy client-facing-trusted interfaces

cli_fac_untrusted_hdr

(Optional) DHCPv6 LDRA policy client-facing-untrusted

TABLE_intf_entry_cli_fac_untrusted

(Optional)

cli_fac_untrusted_intf

(Optional) DHCPv6 LDRA policy client-facing-untrusted interfaces

srv_fac_hdr

(Optional) DHCPv6 LDRA policy server-facing

TABLE_intf_entry_srv_fac

(Optional)

srv_fac_intf

(Optional) DHCPv6 LDRA policy server-facing interfaces

Command Mode

- /exec

show ipv6 dhcp-ldra statistics

show ipv6 dhcp-ldra statistics [ __readonly__ { <cf_total_msg_received> <cf_total_msg_sent> <cf_total_msg_drops> } [ <rx_msg_stats_hdr> TABLE_rx_entry <rx_msg_type_str> <rx_pkts> ] [ <tx_msg_stats_hdr> TABLE_tx_entry <tx_msg_type_str> <tx_pkts> ] [ <drop_msg_stats_hdr> TABLE_drop_entry <msg_discard_reason_str> <drops> ] { <sf_total_msg_received> <sf_total_msg_sent> <sf_total_msg_drops> } [ <sf_rx_msg_stats_hdr> TABLE_sf_rx_entry <sf_rx_msg_type_str> <sf_rx_pkts> ] [ <sf_tx_msg_stats_hdr> TABLE_sf_tx_entry <sf_tx_msg_type_str> <sf_tx_pkts> ] [ <sf_drop_msg_stats_hdr> TABLE_sf_drop_entry <sf_msg_discard_reason_str> <sf_drops> ] ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

dhcp-ldra

Show information about DHCPv6 LDRA

statistics

Statistics related to DHCPv6 LDRA

__readonly__

(Optional) Read only

cf_total_msg_received

(Optional) client facing statistics messages received

cf_total_msg_sent

(Optional) client facing statistics messages sent

cf_total_msg_drops

(Optional) client facing statistics message drops

rx_msg_stats_hdr

(Optional) received message statistics header

TABLE_rx_entry

(Optional)

rx_msg_type_str

(Optional) received dhcpv6 message type

rx_pkts

(Optional) received dhcpv6 packets

tx_msg_stats_hdr

(Optional) forwarded message statistics header

TABLE_tx_entry

(Optional)

tx_msg_type_str

(Optional) forwarded dhcpv6 message type

tx_pkts

(Optional) forwarded dhcpv6 packets

drop_msg_stats_hdr

(Optional) drops message statistics header

TABLE_drop_entry

(Optional)

msg_discard_reason_str

(Optional) message discarded reason

drops

(Optional) dhcpv6 packet drops

sf_total_msg_received

(Optional) server facing statistics messages received

sf_total_msg_sent

(Optional) server facing statistics messages sent

sf_total_msg_drops

(Optional) server facing statistics message drops

sf_rx_msg_stats_hdr

(Optional) received message statistics header

TABLE_sf_rx_entry

(Optional)

sf_rx_msg_type_str

(Optional) received dhcpv6 message type

sf_rx_pkts

(Optional) received dhcpv6 packets

sf_tx_msg_stats_hdr

(Optional) server forwarded message statistics header

TABLE_sf_tx_entry

(Optional)

sf_tx_msg_type_str

(Optional) server forwarded dhcpv6 message type

sf_tx_pkts

(Optional) server forwarded dhcpv6 packets

sf_drop_msg_stats_hdr

(Optional) server drops message statistics header

TABLE_sf_drop_entry

(Optional)

sf_msg_discard_reason_str

(Optional) server message discarded reason

sf_drops

(Optional) server dhcpv6 packet drops

Command Mode

- /exec

show ipv6 dhcp guard policy

show ipv6 dhcp guard policy [ <pname> ] [ __readonly__ { TABLE_dhcp_guard_policy <name> <role> [ <target> ] [ <max_pref> ] [ <min_pref> ] [ <match_src_list> ] [ <match_prefix_list> ] } ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

pname

(Optional) Policy name for dhcp guard feature

__readonly__

(Optional)

TABLE_dhcp_guard_policy

(Optional) IPv6 DHCP guard policy

name

(Optional) Policy Name

role

(Optional) Role

target

(Optional) Target

max_pref

(Optional) Max preference

min_pref

(Optional) Min preference

match_src_list

(Optional) Source Address Match Access List

match_prefix_list

(Optional) Prefix List Match Prefix List

Command Mode

- /exec

show ipv6 dhcp relay

show ipv6 dhcp relay [ interface <intf-range> ] [ __readonly__ [ <relay_service_enable> [ <gbl_src_intf> ] <relay_vpn_enable> <relay_cisco_option_enable> ] [ TABLE_intf <interface-name> [ <intf_src_intf> ] <intf_header> [ TABLE_addr <relay_address> <dst_intf> <vrf_name> ] ] ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

dhcp

Show DHCPv6

relay

DHCPv6 relay address of the interface

interface

(Optional) DHCPv6 relay address of the interface

intf-range

(Optional) interface

__readonly__

(Optional) Read only

relay_service_enable

(Optional) is dhcpv6 relay service enabled

gbl_src_intf

(Optional) interface name

relay_vpn_enable

(Optional) is dhcpv6 relay insertion of vpn sub options enabled

relay_cisco_option_enable

(Optional) is dhcpv6 relay cisco option enabled

TABLE_intf

(Optional)

interface-name

(Optional) interface name

intf_src_intf

(Optional) interface name

intf_header

(Optional) interface header

TABLE_addr

(Optional)

dst_intf

(Optional) interface name

vrf_name

(Optional) VRF name

Command Mode

- /exec

show ipv6 dhcp relay statistics

show ipv6 dhcp relay statistics [ interface <intf> [ [ server-ip <ip-addr-val> [ use-vrf <vrf-name> ] [ interface <dest-interface> ] ] | [ server-ip <ip-addr-val> [ interface <dest-interface> ] [ use-vrf <vrf-name> ] ] ] ] [ __readonly__ [ <msg_stats_hdr> <msg_type_str> <rx_pkts> <tx_pkts> <drops> <msg_type_str_advertise> <rx_pkts_advertise> <tx_pkts_advertise> <drops_advertise> <msg_type_str_request> <rx_pkts_request> <tx_pkts_request> <drops_request> <msg_type_str_confirm> <rx_pkts_confirm> <tx_pkts_confirm> <drops_confirm> <msg_type_str_renew> <rx_pkts_renew> <tx_pkts_renew> <drops_renew> <msg_type_str_rebind> <rx_pkts_rebind> <tx_pkts_rebind> <drops_rebind> <msg_type_str_reply> <rx_pkts_reply> <tx_pkts_reply> <drops_reply> <msg_type_str_release> <rx_pkts_release> <tx_pkts_release> <drops_release> <msg_type_str_decline> <rx_pkts_decline> <tx_pkts_decline> <drops_decline> <msg_type_str_reconfigure> <rx_pkts_reconfigure> <tx_pkts_reconfigure> <drops_reconfigure> <msg_type_str_inforeq> <rx_pkts_inforeq> <tx_pkts_inforeq> <drops_inforeq> <msg_type_str_relay_fwd> <rx_pkts_relay_fwd> <tx_pkts_relay_fwd> <drops_relay_fwd> <msg_type_str_relay_reply> <rx_pkts_relay_reply> <tx_pkts_relay_reply> <drops_relay_reply> <msg_type_str_unknown> <rx_pkts_unknown> <tx_pkts_unknown> <drops_unknown> <msg_type_str_total> ] [ <server_stats_hdr> [ TABLE_server <server_helper_addr> <server_vrf> <server_intf> <server_requests> <server_responses> ] ] [ <drop_hdr> <drop_relay_disable> <drop_max_hops> <drop_validation_fails> <drop_unknown_op_intf> <drop_bad_context> <drop_opt_insert_fail> <drop_server_direct_reply> <drop_no_ipv6_addr> <drop_intf_error> <drop_vpn_disabled> <drop_ipv6_extn_hdrs_presence> <drop_mct_drop> ] ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

dhcp

Show information about DHCPv6

relay

DHCPv6 Relay

statistics

Statistics related to DHCPv6

interface

(Optional) input interface

intf

(Optional) interface

server-ip

(Optional) Server address

use-vrf

(Optional) server address VRF membership

vrf-name

(Optional) VRF name

interface

(Optional) Destination interface for the server address

dest-interface

(Optional) Destination interface

__readonly__

(Optional) Read only

msg_stats_hdr

(Optional) dhcpv6 message statistics header

msg_type_str

(Optional) dhcpv6 message type

rx_pkts

(Optional) dhcpv6 received packets

tx_pkts

(Optional) dhcpv6 forwarded packets

drops

(Optional) dhcpv6 packet drops

msg_type_str_advertise

(Optional)

rx_pkts_advertise

(Optional)

tx_pkts_advertise

(Optional)

drops_advertise

(Optional)

msg_type_str_request

(Optional)

rx_pkts_request

(Optional)

tx_pkts_request

(Optional)

drops_request

(Optional)

msg_type_str_confirm

(Optional)

rx_pkts_confirm

(Optional)

tx_pkts_confirm

(Optional)

drops_confirm

(Optional)

msg_type_str_renew

(Optional)

rx_pkts_renew

(Optional)

tx_pkts_renew

(Optional)

drops_renew

(Optional)

msg_type_str_rebind

(Optional)

rx_pkts_rebind

(Optional)

tx_pkts_rebind

(Optional)

drops_rebind

(Optional)

msg_type_str_reply

(Optional)

rx_pkts_reply

(Optional)

tx_pkts_reply

(Optional)

drops_reply

(Optional)

msg_type_str_release

(Optional)

rx_pkts_release

(Optional)

tx_pkts_release

(Optional)

drops_release

(Optional)

msg_type_str_decline

(Optional)

rx_pkts_decline

(Optional)

tx_pkts_decline

(Optional)

drops_decline

(Optional)

msg_type_str_reconfigure

(Optional)

rx_pkts_reconfigure

(Optional)

tx_pkts_reconfigure

(Optional)

drops_reconfigure

(Optional)

msg_type_str_inforeq

(Optional)

rx_pkts_inforeq

(Optional)

tx_pkts_inforeq

(Optional)

drops_inforeq

(Optional)

msg_type_str_relay_fwd

(Optional)

rx_pkts_relay_fwd

(Optional)

tx_pkts_relay_fwd

(Optional)

drops_relay_fwd

(Optional)

msg_type_str_relay_reply

(Optional)

rx_pkts_relay_reply

(Optional)

tx_pkts_relay_reply

(Optional)

drops_relay_reply

(Optional)

msg_type_str_unknown

(Optional)

rx_pkts_unknown

(Optional)

tx_pkts_unknown

(Optional)

drops_unknown

(Optional)

msg_type_str_total

(Optional) total of all dhcpv6 message types

server_stats_hdr

(Optional) per-server statistics header

TABLE_server

(Optional)

server_vrf

(Optional) dhcpv6 server vrf

server_intf

(Optional) interface name

server_requests

(Optional)

server_responses

(Optional)

drop_hdr

(Optional)

drop_relay_disable

(Optional)

drop_max_hops

(Optional)

drop_validation_fails

(Optional)

drop_unknown_op_intf

(Optional)

drop_bad_context

(Optional)

drop_opt_insert_fail

(Optional)

drop_server_direct_reply

(Optional)

drop_no_ipv6_addr

(Optional)

drop_intf_error

(Optional)

drop_vpn_disabled

(Optional)

drop_ipv6_extn_hdrs_presence

(Optional)

drop_mct_drop

(Optional) drops through mct

Command Mode

- /exec

show ipv6 eigrp route-map statistics

show ipv6 eigrp [ <eigrp-ptag> ] route-map statistics { { redistribute { bgp <as> | { eigrp | isis | ospfv3 | rip } <tag> | static | direct | amt } } | table-map } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> { TABLE_rmap <name> <action> <seq_num> [ { TABLE_cmd <command> <compare_count> <match_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

route-map

Route-map related information

statistics

Route-map statistics

redistribute

Redistribute information from another routing protocol

table-map

Tablemap information

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospfv3

Open Shortest Path First (OSPF) V3

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT Anycast prefix

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_rmap

(Optional) Route-map table

name

(Optional) Route-map name

action

(Optional) Route-map action

seq_num

(Optional) Sequence number of the clause

TABLE_cmd

(Optional) Route-map command table

command

(Optional) Route-map command

compare_count

(Optional) Number of comparisons

match_count

(Optional) Number of matches

total_accept_count

(Optional) Total number of packets accepted by this policy

total_reject_count

(Optional) Total number of packets rejected by this policy

Command Mode

- /exec

show ipv6 fragments

show ipv6 fragments [ <source-addr> ] [ __readonly__ [ TABLE_ipv6_frag [ TABLE_ipv6_each_q { <ipv6-src> <ipv6-dest> <frag-id> <frag-off> <m-flag> <nxt-header> <pay-load> <expires> } ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

fragments

Display queued fragments

__readonly__

(Optional)

TABLE_ipv6_frag

(Optional) IPV6 fragment table

TABLE_ipv6_each_q

(Optional) IPV6 each fragment queue table

frag-id

(Optional) fragment id

frag-off

(Optional) fragment offset

m-flag

(Optional) m flag

nxt-header

(Optional) next header

pay-load

(Optional) fargment payload

expires

(Optional) expiry time

Command Mode

- /exec

show ipv6 icmp

show ipv6 icmp { adjacency | neighbor | sync-entries } [ <interface> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { <icmpv6-vrftype> <icmpv6-cxt-name> } [ TABLE_icmpv6_all_int { TABLE_icmpv6_one_int { <icmpv6-ipv6-addr> <time-stamp-icmpv6> <icmpv6-mac> <icmpv6-state> <icmpv6-short-name> [ <phy-int-short-name> ] } } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

adjacency

Show IPv6 dynamic learnt adjacency entry

neighbor

Show IPv6 dynamic learnt neighbor entry

sync-entries

Show IPv6 table learnt only due to table sync

interface

(Optional) Interface name to display

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

icmpv6-vrftype

(Optional)

icmpv6-cxt-name

(Optional)

TABLE_icmpv6_all_int

(Optional)

TABLE_icmpv6_one_int

(Optional)

time-stamp-icmpv6

(Optional)

icmpv6-mac

(Optional)

icmpv6-state

(Optional)

icmpv6-short-name

(Optional)

phy-int-short-name

(Optional)

Command Mode

- /exec

show ipv6 icmp global traffic

show ipv6 { icmp | nd } global traffic [ __readonly__ [ { TABLE_icmpv6_global_stat [ <st-total> ] [ <rv-total> ] [ <st-err> ] [ <rv-err> ] [ <st-int-drp-cnt> ] [ <rv-int-drp-cnt> ] [ <st-adj-nt-recov-am-ha> ] [ <rv-adj-nt-recov-am-ha> ] [ <st-pkt-allow-inv-ttl-vpc> ] [ <rv-pkt-allow-inv-ttl-vpc> ] [ <st-drp-src-mac-own> ] [ <rv-drp-src-mac-own> ] [ <st-drp-tgt-ip-not-own> ] [ <rv-drp-tgt-ip-not-own> ] [ <st-drp-src-ip-not-own> ] [ <rv-drp-src-ip-not-own> ] [ <st-dest-unreach> ] [ <rv-dest-unreach> ] [ <st-admin-prohibit> ] [ <rv-admin-prohibit> ] [ <st-time-exceed> ] [ <rv-time-exceed> ] [ <st-para-pbms> ] [ <rv-para-pbms> ] [ <st-echo-req> ] [ <rv-echo-req> ] [ <st-echo-reply> ] [ <rv-echo-reply> ] [ <st-redirect> ] [ <rv-redirect> ] [ <st-pkt-too-big> ] [ <rv-pkt-too-big> ] [ <st-rtr-adver> ] [ <rv-rtr-adver> ] [ <st-rtr-solicit> ] [ <rv-rtr-solicit> ] [ <st-nei-adver> ] [ <rv-nei-adver> ] [ <st-nei-solicit> ] [ <rv-nei-solicit> ] [ <fast-path-pkts> ] [ <fastpath-disable> ] [ <ign-fastpath-pkts> ] [ <dup-rtr-ra-recvd> ] [ <rv-dup-rtr-ra-recvd> ] } ] [ { TABLE_icmpv6_mld_stat <st-v1-queries> <rv-v1-queries> <st-v2-queries> <rv-v2-queries> <st-v1-reports> <rv-v1-reports> <st-v2-reports> <rv-v2-reports> <st-v1-leaves> <rv-v1-leaves> } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

nd

ICMPv6 Neighbor Discovery commands

global

Show ICMPv6/ND global variables

traffic

Display ICMPv6 software processed traffic statistics

__readonly__

(Optional)

TABLE_icmpv6_global_stat

(Optional) ICMPV6 global statistics

st-total

(Optional) total sent messages

rv-total

(Optional) total receive messages

st-err

(Optional) total sent error message

rv-err

(Optional) total receive error message

st-int-drp-cnt

(Optional) sent interface down drop count

rv-int-drp-cnt

(Optional) receive interface down drop count

st-adj-nt-recov-am-ha

(Optional) sent Adjacency not recovered from AM aft HA

rv-adj-nt-recov-am-ha

(Optional) receive Adjacency not recovered from AM aft HA

st-pkt-allow-inv-ttl-vpc

(Optional) sent Pkts allowed due to inv ttl on vPC-MCT

rv-pkt-allow-inv-ttl-vpc

(Optional) receive Pkts allowed due to inv ttl on vPC-MCT

st-drp-src-mac-own

(Optional) sent packet drop source mac address own

rv-drp-src-mac-own

(Optional) receive packet drop source mac address own

st-drp-tgt-ip-not-own

(Optional) sent drop tgt ip address not own

rv-drp-tgt-ip-not-own

(Optional) receive drop tgt ip address not own

st-drp-src-ip-not-own

(Optional) sent dropped source ip address

rv-drp-src-ip-not-own

(Optional) receive dropped source ip address

st-dest-unreach

(Optional) sent destination unreached

rv-dest-unreach

(Optional) receive destination unreach

st-admin-prohibit

(Optional) sent Administratively Prohibited

rv-admin-prohibit

(Optional) receive Administratively Prohibited

st-time-exceed

(Optional) sent time exceeded

rv-time-exceed

(Optional) receive time exceeded

st-para-pbms

(Optional) sent parameter problems

rv-para-pbms

(Optional) receive parameter problems

st-echo-req

(Optional) sent echo request

rv-echo-req

(Optional) receive echo request

st-echo-reply

(Optional) sent echo replies

rv-echo-reply

(Optional) receive echo replies

st-redirect

(Optional) sent redirects

rv-redirect

(Optional) receive redirects

st-pkt-too-big

(Optional) sent packet too big

rv-pkt-too-big

(Optional) receive packet too big

st-rtr-adver

(Optional) sent router advertisements

rv-rtr-adver

(Optional) receive router advertisements

st-rtr-solicit

(Optional) sent router solicitations

rv-rtr-solicit

(Optional) receive router solicitations

st-nei-adver

(Optional) sent neighbor advertisements

rv-nei-adver

(Optional) receive neighbor advertisements

st-nei-solicit

(Optional) sent neighbor solicitations

rv-nei-solicit

(Optional) receive neighbor solicitations

fast-path-pkts

(Optional) fastpath packets

fastpath-disable

(Optional) [fastpath diasbled / others]

ign-fastpath-pkts

(Optional) Packets drop request ignore count

dup-rtr-ra-recvd

(Optional) Duplicate router RA sent

rv-dup-rtr-ra-recvd

(Optional) Duplicate router RA received

TABLE_icmpv6_mld_stat

(Optional) ICMPv6 MLD Statistics

st-v1-queries

(Optional) V1 Queries sent

rv-v1-queries

(Optional) V1 Queries recieved

st-v2-queries

(Optional) V2 Queries sent

rv-v2-queries

(Optional) V2 Queries received

st-v1-reports

(Optional) V1 Reports sent

rv-v1-reports

(Optional) V1 Reports received

st-v2-reports

(Optional) V2 Reports sent

rv-v2-reports

(Optional) V2 Reports received

st-v1-leaves

(Optional) V1 Leaves sent

rv-v1-leaves

(Optional) V1 Leaves received

Command Mode

- /exec

show ipv6 icmp interface

{ show ipv6 { icmp | nd } interface [ <interface> ] { [ prefix [ full ] ] | [ route ] | [ detail ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { show ipv6 [ icmp ] mld interface [ brief ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { show ipv6 [ icmp ] mld interface <interface> } [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_intf <intf-name> <proto-state> <link-state> <admin-state> [ TABLE_addr <addr> ] <subnet> <link-local-addr> <icmpv6-disabled> <last-ns-sent> <last-na-sent> <last-ra-sent> <next-na-sent> <ra-min-interval> <ra-interval> <set-m-flag> <set-o-flag> <current-hop-limit> <mtu> <router-lifetime> <reachable-time> <retrans-timer> <ns-interval> <send-redirect> <send-unreachables> <mld-disabled> <mld-querier> <mld-entry-count> <mld-config-version> <mld-querier-version> <mld-host-version> <mld-query-timer> <mld-querier-expiry> <mld-qi> <mld-config-qi> <mld-query-mrt> <mld-config-query-mrt> <mld-startup-qi> <mld-config-startup-qi> <mld-startup-qc> <mld-config-last-member-mrt> <mld-last-member-qc> <mld-group-timeout> <mld-config-group-timeout> <mld-querier-timeout> <mld-config-querier-timeout> <mld-config-unsol-rpt-interval> <mld-qrv> <mld-config-robustness-variable> <mld-config-rpt-link-local> <mld-refcount> <static-group-map> <join-group-map> <ra-sent> <ra-rec> <rs-sent> <rs-rec> <na-sent> <na-rec> <ns-sent> <ns-rec> <redirect-sent> <redirect-rec> <msg-sent> <msg-rec> <errors-sent> <erros-rec> <ifdown-sent> <ifdown-rec> <am-ha-not-ready> <allow-mct-ttl> <our-own-mac> <tgt-not-us> <dest-unreachs-sent> <dest-unreachs-rec> <admin-prohibs-sent> <admin-prohibs-rec> <time-excds-sent> <time-excds-rec> <parm-problems-sent> <parm-problems-rec> <echos-sent> <echos-rec> <echo-replies-sent> <echo-replies-rec> <pkt-toobigs-sent> <pkt-toobigs-rec> <fastpath-pkt-recv> <fastpath-disable-pkt-recv> <fastpath-ignore-pkt-recv> <v1-queries-sent> <v1-queries-rec> <v2-queries-sent> <v2-queries-rec> <v1-reports-sent> <v1-reports-rec> <v2-reports-sent> <v2-reports-rec> <v1-leaves-sent> <v1-leaves-rec> <v2-leaves-sent> <v2-leaves-rec> <uptime> <mld-config-il> [ TABLE_one_int <grp-id> <protocol-one-int> <client-uuid> <client-state-act> <client-in-use> TABLE_vip_list <virt-ipv6> <virt-mac> <context_name> <context_id> <last-solocit-st> <last-nei-ad-st> <last-rtr-adv-st> <nxt-rtr-ad-st> ] <max-dad-attempts> <current-dad-attempts> [ TABLE_route <route> <preference> <lifetime> <info-option> <reachability-verify-enabled> <adv-route-info> <route-zero-lifetime> ] [ TABLE_prefix <prefix> <enabled> <vlaidlife-time> <preferredlife-time> <on-link> <off-link> <autonomous> ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

nd

ICMPv6 Neighbor Discovery commands

mld

Display Multicast Listener Discovery information

interface

Display ICMPv6 related interface information

prefix

(Optional) Display List of ICMPv6 RA prefix

route

(Optional) Display List of ICMPv6 RA routes

full

(Optional) Display Complete prefix information

detail

(Optional) Display ICMPv6 related interface information in detail

brief

(Optional) Display ICMPv6 related interface information in brief

interface

(Optional) Interface name to show

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_intf

(Optional)

intf-name

(Optional)

proto-state

(Optional)

link-state

(Optional)

admin-state

(Optional)

TABLE_addr

(Optional)

icmpv6-disabled

(Optional)

last-ns-sent

(Optional)

last-na-sent

(Optional)

last-ra-sent

(Optional)

next-na-sent

(Optional)

ra-min-interval

(Optional)

ra-interval

(Optional)

set-m-flag

(Optional)

set-o-flag

(Optional)

current-hop-limit

(Optional)

mtu

(Optional)

router-lifetime

(Optional)

reachable-time

(Optional)

retrans-timer

(Optional)

ns-interval

(Optional)

send-redirect

(Optional)

send-unreachables

(Optional)

mld-disabled

(Optional)

mld-entry-count

(Optional)

mld-config-version

(Optional)

mld-querier-version

(Optional)

mld-host-version

(Optional)

mld-query-timer

(Optional)

mld-querier-expiry

(Optional)

mld-qi

(Optional)

mld-config-qi

(Optional)

mld-query-mrt

(Optional)

mld-config-query-mrt

(Optional)

mld-startup-qi

(Optional)

mld-config-startup-qi

(Optional)

mld-startup-qc

(Optional)

mld-config-last-member-mrt

(Optional)

mld-last-member-qc

(Optional)

mld-group-timeout

(Optional)

mld-config-group-timeout

(Optional)

mld-querier-timeout

(Optional)

mld-config-querier-timeout

(Optional)

mld-config-unsol-rpt-interval

(Optional)

mld-qrv

(Optional)

mld-config-robustness-variable

(Optional)

mld-config-rpt-link-local

(Optional)

mld-refcount

(Optional)

static-group-map

(Optional)

join-group-map

(Optional)

ra-sent

(Optional)

ra-rec

(Optional)

rs-sent

(Optional)

rs-rec

(Optional)

na-sent

(Optional)

na-rec

(Optional)

ns-sent

(Optional)

ns-rec

(Optional)

redirect-sent

(Optional)

redirect-rec

(Optional)

msg-sent

(Optional)

msg-rec

(Optional)

errors-sent

(Optional)

erros-rec

(Optional)

ifdown-sent

(Optional)

ifdown-rec

(Optional)

am-ha-not-ready

(Optional)

allow-mct-ttl

(Optional)

our-own-mac

(Optional)

tgt-not-us

(Optional)

dest-unreachs-sent

(Optional)

dest-unreachs-rec

(Optional)

admin-prohibs-sent

(Optional)

admin-prohibs-rec

(Optional)

time-excds-sent

(Optional)

time-excds-rec

(Optional)

parm-problems-sent

(Optional)

parm-problems-rec

(Optional)

echos-sent

(Optional)

echos-rec

(Optional)

echo-replies-sent

(Optional)

echo-replies-rec

(Optional)

pkt-toobigs-sent

(Optional)

pkt-toobigs-rec

(Optional)

fastpath-pkt-recv

(Optional)

fastpath-disable-pkt-recv

(Optional)

fastpath-ignore-pkt-recv

(Optional)

v1-queries-sent

(Optional)

v1-queries-rec

(Optional)

v2-queries-sent

(Optional)

v2-queries-rec

(Optional)

v1-reports-sent

(Optional)

v1-reports-rec

(Optional)

v2-reports-sent

(Optional)

v2-reports-rec

(Optional)

v1-leaves-sent

(Optional)

v1-leaves-rec

(Optional)

v2-leaves-sent

(Optional)

v2-leaves-rec

(Optional)

uptime

(Optional)

mld-config-il

(Optional)

TABLE_one_int

(Optional)

grp-id

(Optional)

protocol-one-int

(Optional)

client-uuid

(Optional)

client-state-act

(Optional)

client-in-use

(Optional)

TABLE_vip_list

(Optional)

virt-mac

(Optional)

context_name

(Optional)

context_id

(Optional)

last-solocit-st

(Optional)

last-nei-ad-st

(Optional)

last-rtr-adv-st

(Optional)

nxt-rtr-ad-st

(Optional)

max-dad-attempts

(Optional)

current-dad-attempts

(Optional)

TABLE_route

(Optional)

preference

(Optional)

lifetime

(Optional)

info-option

(Optional)

reachability-verify-enabled

(Optional)

adv-route-info

(Optional)

route-zero-lifetime

(Optional)

TABLE_prefix

(Optional)

enabled

(Optional)

vlaidlife-time

(Optional)

preferredlife-time

(Optional)

on-link

(Optional)

off-link

(Optional)

autonomous

(Optional)

Command Mode

- /exec

show ipv6 icmp ndp

show ipv6 icmp ndp

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

ndp

Displaysipv6 neighbor by looking at the top level pt

Command Mode

- /exec

show ipv6 icmp off-list

show ipv6 icmp off-list [ vlan <vlan-id> ] [ __readonly__ [ <vlan-adj-cnt> ] [ <icmpv6-sync-adj-cnt> ] { TABLE_icmpv6_vlan_list <adj-vlan-id> <off-adj-ip-addr> <icmpv6-time-stamp> <icmpv6-mac-addr> <off-adj-flags> } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

off-list

Show adjacencies in off-list icmpv6 database

vlan

(Optional) Vlan id

vlan-id

(Optional) Show information for specified vlan

__readonly__

(Optional)

vlan-adj-cnt

(Optional) vlan adjacency count

icmpv6-sync-adj-cnt

(Optional) icmpv6 sync adjacency count

TABLE_icmpv6_vlan_list

(Optional) icmpv6 vlan list table

adj-vlan-id

(Optional) adjacency vlan id

icmpv6-time-stamp

(Optional) icmpv6 time stamp

icmpv6-mac-addr

(Optional) icmpv6 mac address

off-adj-flags

(Optional) offlist adjacency flags

Command Mode

- /exec

show ipv6 icmp process sdb

show ipv6 icmp process sdb

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

process

Display process information

sdb

Dump IPv6 sdb in a file

Command Mode

- /exec

show ipv6 icmp vaddr

show ipv6 icmp vaddr { link-local [ detail ] | global | pt-tree } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_pt_tree { <v-ipv6-addr> <v-mac-addr> <v-interface> <v-client-state> } ] [ TABLE_vrf_all [ TABLE_glo_vrf { <group-id> <protocol-vrf> <cli-uuid> <vaddr-action> <vrf-interface> <v-ipv6-addr-one> <vaddr-mac> <cxt-name> <cxt-id> } ] [ TABLE_one_int [ <lcache-inter> <cxt-name-int> <cxt_id-int> ] TABLE_one_group { <grp-id> <protocol-one-int> <client-uuid> <client-state-act> <client-in-use> <client-state> TABLE_vip_list { <virt-ipv6> <virt-mac> <cxt_name> <cxt_id> [ <last-solocit-st> <last-nei-ad-st> <last-rtr-adv-st> <nxt-rtr-ad-st> <icmpv6-addr> <vmac-addr> <st-total> <rv-total> <st-err> <rv-err> <st-int-dwn-drp> <rv-int-dwn-drp> <st-adj-nt-recov-am> <rv-adj-nt-recov-am> <st-pkt-allow-inv-ttl> <rv-pkt-allow-inv-ttl> <st-pkt-drp-src-mac-own> <rv-pkt-drp-src-mac-own> <st-pkt-drp-tgt-not-own> <rv-pkt-drp-tgt-not-own> <st-pkt-drp-src-not-own> <rv-pkt-drp-src-not-own> <st-dest-unreach> <rv-dest-unreach> <st-admin-prohi> <rv-admin-prohi> <st-time-exceed> <rv-time-exceed> <st-patr-pbm> <rv-patr-pbm> <st-echo-req> <rv-echo-req> <st-echo-reply> <rv-echo-reply> <st-dup-ra> <rv-dup-ra> <st-redirect> <rv-redirect> <st-pkt-too-big> <rv-pkt-too-big> <st-rtr-adver> <rv-rtr-adver> <st-rtr-solicit> <rv-rtr-solicit> <st-nei-adver> <rv-nei-adver> <st-nei-solicit> <rv-nei-solicit> ] } } ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

vaddr

Show all virtual addresses configured

link-local

Display link-local virtual ipv6 addresses

detail

(Optional) Display detailed information

global

Display global virtual ipv6 addresses

pt-tree

Display link-local virtual ipv6 addresses pt-tree information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_pt_tree

(Optional)

v-mac-addr

(Optional)

v-interface

(Optional)

v-client-state

(Optional)

TABLE_vrf_all

(Optional)

TABLE_glo_vrf

(Optional)

group-id

(Optional)

protocol-vrf

(Optional)

cli-uuid

(Optional)

vaddr-action

(Optional)

vrf-interface

(Optional)

vaddr-mac

(Optional)

cxt-name

(Optional)

cxt-id

(Optional)

TABLE_one_int

(Optional)

lcache-inter

(Optional)

cxt-name-int

(Optional)

cxt_id-int

(Optional)

grp-id

(Optional)

protocol-one-int

(Optional)

client-uuid

(Optional)

client-state-act

(Optional)

client-in-use

(Optional)

client-state

(Optional)

TABLE_one_group

(Optional)

TABLE_vip_list

(Optional)

virt-mac

(Optional)

cxt_name

(Optional)

cxt_id

(Optional)

last-solocit-st

(Optional)

last-nei-ad-st

(Optional)

last-rtr-adv-st

(Optional)

nxt-rtr-ad-st

(Optional)

vmac-addr

(Optional)

st-total

(Optional)

rv-total

(Optional)

st-err

(Optional)

rv-err

(Optional)

st-int-dwn-drp

(Optional)

rv-int-dwn-drp

(Optional)

st-adj-nt-recov-am

(Optional)

rv-adj-nt-recov-am

(Optional)

st-pkt-allow-inv-ttl

(Optional)

rv-pkt-allow-inv-ttl

(Optional)

st-pkt-drp-src-mac-own

(Optional)

rv-pkt-drp-src-mac-own

(Optional)

st-pkt-drp-tgt-not-own

(Optional)

rv-pkt-drp-tgt-not-own

(Optional)

st-pkt-drp-src-not-own

(Optional)

rv-pkt-drp-src-not-own

(Optional)

st-dest-unreach

(Optional)

rv-dest-unreach

(Optional)

st-admin-prohi

(Optional)

rv-admin-prohi

(Optional)

st-time-exceed

(Optional)

rv-time-exceed

(Optional)

st-patr-pbm

(Optional)

rv-patr-pbm

(Optional)

st-echo-req

(Optional)

rv-echo-req

(Optional)

st-echo-reply

(Optional)

rv-echo-reply

(Optional)

st-dup-ra

(Optional)

rv-dup-ra

(Optional)

st-redirect

(Optional)

rv-redirect

(Optional)

st-pkt-too-big

(Optional)

rv-pkt-too-big

(Optional)

st-rtr-adver

(Optional)

rv-rtr-adver

(Optional)

st-rtr-solicit

(Optional)

rv-rtr-solicit

(Optional)

st-nei-adver

(Optional)

rv-nei-adver

(Optional)

st-nei-solicit

(Optional)

rv-nei-solicit

(Optional)

Command Mode

- /exec

show ipv6 icmp vpc-statistics

show ipv6 icmp vpc-statistics [ __readonly__ [ { TABLE_icmpv6_vpc_stats [ <icmpv6-pro-drp-pull-disable> ] [ <icmpv6-pro-drp-push-msg-disable> ] [ <icmpv6-pro-ign-snd-pull-disabe> ] [ <icmpv6-ign-snd-push-disable> ] [ <icmpv6-drp-im-fail> ] [ <icmpv6-drp-mcecm-fail> ] [ <icmpv6-drp-invalid-pc-iod> ] [ <icmpv6-drp-pt-lookup-fail> ] [ <icmpv6-drp-resp-fail-no-mct> ] [ <icmpv6-drp-resp-fail> ] [ <icmpv6-vpc-id-ifindx-sending-pushmsg> ] [ <icmpv6-vpc-id-proc-cfs-payload> ] [ <icmpv6-resp-sent> ] [ <icmpv6-resp-recvd> ] [ <icmpv6-resp-recv-err> ] [ <icmpv6-rcvd-msg> ] [ <icmpv6-send-fail> ] [ <icmpv6-cfs-rel-dlvry-fail> ] [ <icmpv6-cfs-rel-dnvry-suc> ] [ <icmpv6-drp-pt-add-fail> ] [ <icmpv6-drp-no-mem> ] [ <icmpv6-drp-tmr-cre-fail> ] [ <icmpv6-drp-add-adj-fail> ] [ <icmpv6-off-drp-pt-lookup-fail> ] [ <icmpv6-dont-drp-vlan-mismat> ] [ <icmpv6-drp-svi-invalid> ] [ <icmpv6-dont-drop-sv-down> ] [ <icmpv6-drp-mct-down> ] [ <icmpv6-drp-ctxt-invalid> ] [ <icmpv6-drp-vrf-invalid> ] [ <icmpv6-drp-l3addr-invalid> ] [ <icmpv6-drp-l3addr-sanity-fail> ] [ <icmpv6-drp-mac-sanity-fail> ] [ <icmpv6-own-rtr-mac> ] [ <icmpv6-drp-own-ipv6addr> ] [ <icmpv6-drp-own-vipv6add> ] [ <icmpv6-drp-adj-fail> ] [ <icmpv6-drp-subnet-mismatch> ] [ <icmpv6-drp-adj-exist> ] [ <icmpv6-dont-drp-ip-not-enable> ] [ <icmpv6-drp-total-cnt> ] [ <icmpv6-dont-drop-total-cnt> ] [ <icmpv6-add-adj> ] [ <icmpv6-del-adj> ] [ <icmpv6-adj-already-exist> ] [ <icmpv6-vpc-id-periodic-sync> ] [ <icmpv6-vpc-id-cfs-payload-periodic-sync> ] } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

vpc-statistics

Show vPC global statistics

__readonly__

(Optional)

TABLE_icmpv6_vpc_stats

(Optional) icmpv6 Vpc statistics

icmpv6-pro-drp-pull-disable

(Optional) icmpv6 protocol drop pull disable

icmpv6-pro-drp-push-msg-disable

(Optional) icmpv6 protocol drop push message disable

icmpv6-pro-ign-snd-pull-disabe

(Optional) icmpv6 protocol ignore send pull disable

icmpv6-ign-snd-push-disable

(Optional) icmpv6 ignore send push disable

icmpv6-drp-im-fail

(Optional) icmpv6 drop im fail

icmpv6-drp-mcecm-fail

(Optional) MCECM api failed while processing CFS payload

icmpv6-drp-invalid-pc-iod

(Optional) Invalid MCT port-channel iod while processing CFS payload

icmpv6-drp-pt-lookup-fail

(Optional) PT lookup failed while processing CFS payload

icmpv6-drp-resp-fail-no-mct

(Optional) invalid MCT iod while processing CFS payload

icmpv6-drp-resp-fail

(Optional) response failed while processing CFS payload

icmpv6-vpc-id-ifindx-sending-pushmsg

(Optional) Unable to retrive VPC id ifindex while sending push message

icmpv6-vpc-id-proc-cfs-payload

(Optional) Unable to retrive ifindex from vpc id

icmpv6-vpc-id-periodic-sync

(Optional) unable to retrive vpc id ifindex for periodic sync

icmpv6-vpc-id-cfs-payload-periodic-sync

(Optional) unable to retrive ifindex from vpc id while processing cfs payload for periodic sync

icmpv6-resp-sent

(Optional) Response sent via CFSoE

icmpv6-resp-recvd

(Optional) Response received via CFSoE

icmpv6-resp-recv-err

(Optional) Response received via CFSoE with errors

icmpv6-rcvd-msg

(Optional) Received message via CFSoE

icmpv6-send-fail

(Optional) Send message failed via CFSoE

icmpv6-cfs-rel-dlvry-fail

(Optional) MCECM send api failed via CFSoE

icmpv6-cfs-rel-dnvry-suc

(Optional) Send message succeeded via CFSoE

icmpv6-drp-pt-add-fail

(Optional) PT add failed while processing offlist database

icmpv6-drp-no-mem

(Optional) Memory alloc failed while processing offlist database

icmpv6-drp-tmr-cre-fail

(Optional) Timer create failed while processing offlist database

icmpv6-drp-add-adj-fail

(Optional) Adjacency addition failed while processing offlist database

icmpv6-off-drp-pt-lookup-fail

(Optional) PT lookup failed while processing offlist database

icmpv6-dont-drp-vlan-mismat

(Optional) VLAN mismatch while processing offlist database

icmpv6-drp-svi-invalid

(Optional) SVI is invalid while processing offlist database

icmpv6-dont-drop-sv-down

(Optional) SVI is down while processing offlist database

icmpv6-drp-mct-down

(Optional) MCT is down while processing offlist database

icmpv6-drp-ctxt-invalid

(Optional) Ctxt_type is invalid while processing offlist database

icmpv6-drp-vrf-invalid

(Optional) VRF is invalid while processing offlist database

icmpv6-drp-l3addr-invalid

(Optional) IP address is invalid while processing offlist database

icmpv6-drp-l3addr-sanity-fail

(Optional) IP address sanity failed while processing offlist database

icmpv6-drp-mac-sanity-fail

(Optional) MAC address sanity failed while processing offlist database

icmpv6-own-rtr-mac

(Optional) Our own router mac while processing offlist database

icmpv6-drp-own-ipv6addr

(Optional) Our own ip address while processing offlist database

icmpv6-drp-own-vipv6add

(Optional) Our own virtual ip address while processing offlist database

icmpv6-drp-adj-fail

(Optional) Create adjacency failed while processing offlist database

icmpv6-drp-subnet-mismatch

(Optional) Subnet mismatch while processing offlist database

icmpv6-drp-adj-exist

(Optional) Entry exists while processing offlist database

icmpv6-dont-drp-ip-not-enable

(Optional) IPv6 not enabled on interface while processing offlist database

icmpv6-drp-total-cnt

(Optional) Total drop count while processing offlist database

icmpv6-dont-drop-total-cnt

(Optional) Total don't drop count while processing offlist database

icmpv6-add-adj

(Optional) Total adjacency additions in offlist database

icmpv6-del-adj

(Optional) Total adjacency deletions in offlist database

icmpv6-adj-already-exist

(Optional) Total adjacencies ignored as they already exists in offlist database

Command Mode

- /exec

show ipv6 interface

show ipv6 interface { [ brief [ include-secondary ] | [ <interface> | <ipv6-addr> ] [ detail ] ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_intf <vrf-name-out> <intf-name> [ <proto-state> ] [ <link-state> ] [ <admin-state> ] [ <iod> ] [ TABLE_addr <addr> ] [ <prefix> ] [ { TABLE_sec_addr [ <sec-prefix> ] } ] [ <linklocal-addr> ] [ <linklocal-configured> ] [ { TABLE_vaddr [ <v-addr> ] } ] [ <ipv6-disabled> ] [ <mrouting-enabled> ] [ <mgroup-locally-joined> ] [ { TABLE_maddr <m-addr> [ <m-addr-refcnt> ] } ] [ { TABLE_sg [ <sg-saddr> ] [ <sg-maddr> ] [ <sg-refcnt> ] } ] [ <mtu> ] [ <global-in-pcl-configured> ] [ <global-in-pcl-name> ] [ <global-in-pcl-pending> ] [ <global-out-pcl-configured> ] [ <global-out-pcl-name> ] [ <global-out-pcl-pending> ] [ <in-pcl-configured> ] [ <in-pcl-name> ] [ <in-pcl-pending> ] [ <out-pcl-configured> ] [ <out-pcl-name> ] [ <out-pcl-pending> ] [ <urpf-mode> ] [ <ipv6-lstype> ] [ <stats-last-reset> ] [ <acl-in> ] [ <acl-out> ] [ <upkt-fwd> ] [ <upkt-orig> ] [ <upkt-consumed> ] [ <ubyte-fwd> ] [ <ubyte-orig> ] [ <ubyte-consumed> ] [ <mpkt-fwd> ] [ <mpkt-orig> ] [ <mpkt-consumed> ] [ <mbyte-fwd> ] [ <mbyte-orig> ] [ <mbyte-consumed> ] [ <upkt-in-acc> ] [ <upkt-in-rej> ] [ <ubyte-in-acc> ] [ <ubyte-in-rej> ] [ <mpkt-in-acc> ] [ <mpkt-in-rej> ] [ <mbyte-in-acc> ] [ <mbyte-in-rej> ] [ <upkt-out-acc> ] [ <upkt-out-rej> ] [ <ubyte-out-acc> ] [ <ubyte-out-rej> ] [ <mpkt-out-acc> ] [ <mpkt-out-rej> ] [ <mbyte-out-acc> ] [ <mbyte-out-rej> ] [ <hw-upkt-sent> ] [ <hw-upkt-recv> ] [ <hw-ubyte-sent> ] [ <hw-ubyte-recv> ] [ <hw-mpkt-sent> ] [ <hw-mpkt-recv> ] [ <hw-mbyte-sent> ] [ <hw-mbyte-recv> ] [ <hw-upkt-drop> ] [ <hw-ubyte-drop> ] [ <hw-mpkt-drop> ] [ <hw-mbyte-drop> ] [ <hw-mpkt-rpdrop> ] [ <hw-mbyte-rpdrop> ] [ <hw-mpkt-dfdrop> ] [ <hw-mbyte-dfdrop> ] [ <unspecified-src> ] [ <total-pkt-recv-tent-addr> ] [ <total-pkts-recv-invalid-addr-state> ] [ <total-pkt-recv-dup-state> ] [ <anycast-pkt-arrived-tcp> ] [ <deliver-intf-down> ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

interface

Display IPv6 related interface information

brief

(Optional) Display summary of IPv6 status and configuration

include-secondary

(Optional) Display summary of all IPv6 addresses

interface

(Optional) Interface name to display

detail

(Optional) Display detailed IPv6 interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs

__readonly__

(Optional)

TABLE_addr

(Optional)

vrf-name-out

(Optional)

TABLE_intf

(Optional)

intf-name

(Optional)

proto-state

(Optional)

link-state

(Optional)

admin-state

(Optional)

iod

(Optional)

addr

(Optional)

prefix

(Optional)

TABLE_sec_addr

(Optional)

sec-prefix

(Optional)

linklocal-configured

(Optional)

TABLE_vaddr

(Optional)

ipv6-disabled

(Optional)

mrouting-enabled

(Optional)

mgroup-locally-joined

(Optional)

TABLE_maddr

(Optional)

m-addr-refcnt

(Optional)

TABLE_sg

(Optional)

sg-refcnt

(Optional)

mtu

(Optional)

global-in-pcl-configured

(Optional)

global-in-pcl-name

(Optional)

global-in-pcl-pending

(Optional)

global-out-pcl-configured

(Optional)

global-out-pcl-name

(Optional)

global-out-pcl-pending

(Optional)

in-pcl-configured

(Optional)

in-pcl-name

(Optional)

in-pcl-pending

(Optional)

out-pcl-configured

(Optional)

out-pcl-name

(Optional)

out-pcl-pending

(Optional)

urpf-mode

(Optional)

ipv6-lstype

(Optional)

stats-last-reset

(Optional)

acl-in

(Optional)

acl-out

(Optional)

upkt-fwd

(Optional)

upkt-orig

(Optional)

upkt-consumed

(Optional)

ubyte-fwd

(Optional)

ubyte-orig

(Optional)

ubyte-consumed

(Optional)

mpkt-fwd

(Optional)

mpkt-orig

(Optional)

mpkt-consumed

(Optional)

mbyte-fwd

(Optional)

mbyte-orig

(Optional)

mbyte-consumed

(Optional)

upkt-in-acc

(Optional)

upkt-in-rej

(Optional)

ubyte-in-acc

(Optional)

ubyte-in-rej

(Optional)

mpkt-in-acc

(Optional)

mpkt-in-rej

(Optional)

mbyte-in-acc

(Optional)

mbyte-in-rej

(Optional)

upkt-out-acc

(Optional)

upkt-out-rej

(Optional)

ubyte-out-acc

(Optional)

ubyte-out-rej

(Optional)

mpkt-out-acc

(Optional)

mpkt-out-rej

(Optional)

mbyte-out-acc

(Optional)

mbyte-out-rej

(Optional)

hw-upkt-sent

(Optional)

hw-upkt-recv

(Optional)

hw-ubyte-sent

(Optional)

hw-ubyte-recv

(Optional)

hw-mpkt-sent

(Optional)

hw-mpkt-recv

(Optional)

hw-mbyte-sent

(Optional)

hw-mbyte-recv

(Optional)

hw-upkt-drop

(Optional)

hw-ubyte-drop

(Optional)

hw-mpkt-drop

(Optional)

hw-mbyte-drop

(Optional)

hw-mpkt-rpdrop

(Optional)

hw-mbyte-rpdrop

(Optional)

hw-mpkt-dfdrop

(Optional)

hw-mbyte-dfdrop

(Optional)

unspecified-src

(Optional)

total-pkt-recv-tent-addr

(Optional)

total-pkts-recv-invalid-addr-state

(Optional)

total-pkt-recv-dup-state

(Optional)

anycast-pkt-arrived-tcp

(Optional)

deliver-intf-down

(Optional)

Command Mode

- /exec

show ipv6 interface global

show ipv6 interface global

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

interface

Display IPv6 related interface information

global

Show IPv6 global parameters

Command Mode

- /exec

show ipv6 local-pt

show ipv6 local-pt [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

local-pt

Display IPv6 local address pt data structure

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs

Command Mode

- /exec

show ipv6 local policy

show ipv6 local policy [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_pbr [ <interface> ] [ <rmap> ] [ <status> ] [ <vrf_name> ] } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

local

IPv6 local options

policy

Policy routing

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_pbr

(Optional)

interface

(Optional)

rmap

(Optional)

status

(Optional)

vrf_name

(Optional)

Command Mode

- /exec

show ipv6 mld groups

show ipv6 [ icmp ] mld groups [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out> <entry-count> TABLE_group <group-out> TABLE_intf <intf-name> <icmpv6-disabled> <mld-source> <mld-group> <mld-source-unspec> <mld-static> <mld-local-group> <mld-translated> <mld-uptime> <mld-expire> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

groups

Display MLD attached group membership information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

(Optional) Display group membership on interface name

__readonly__

(Optional)

TABLE_vrf

(Optional) vrf table

vrf-name-out

(Optional) vrf name

entry-count

(Optional) entry count

TABLE_group

(Optional) group table

TABLE_intf

(Optional) interface table

intf-name

(Optional) interface name

icmpv6-disabled

(Optional) icmpv6 disabled

mld-source-unspec

(Optional) mld source unspecified

mld-static

(Optional) mld static

mld-local-group

(Optional) mld local group

mld-translated

(Optional) mld translated

mld-uptime

(Optional) mld uptime

mld-expire

(Optional) mld expire

Command Mode

- /exec

show ipv6 mld local-groups

show ipv6 [ icmp ] mld local-groups [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf> { TABLE_entry <group-addr> <source-addr> <static-oif> <local-group> <if-name> <last-reported> } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

local-groups

Display MLD local group membership information

interface

(Optional) Display group membership on interface name

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional) vrf table

vrf

(Optional) vrf

TABLE_entry

(Optional) entry table

static-oif

(Optional) static oif

local-group

(Optional) local group

if-name

(Optional) interface name

last-reported

(Optional) last reported

Command Mode

- /exec

show ipv6 mld vrf all

show ipv6 [ icmp ] mld vrf all

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

vrf

Display per-VRF information

all

Display MLD VRFs

Command Mode

- /exec

show ipv6 mroute

show ipv6 mroute [ [ bitfield ] | rp | { [ <group> ] summary [ software-forwarded ] } | { summary [ count | software-forwarded ] } | { { <source> <group> } | { <group> [ <source> ] } } [ summary [ software-forwarded ] | bitfield ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_vrf <vrf-name> [ TABLE_addr <mcast-addrs> <pending> <bidir> <uptime> [ TABLE_mpib <mpib-name> <stale-route> ] <if-name><rpf-nbr> <internal> <oif-count><fabric-oif><fabric-loser> [ TABLE_oif <oif-name> <oif-uptime> [ TABLE_oif_mpib <oif-mpib-name> <stale-oif> ] <rpf> ] [ <oif-list-bitfield> ] ] [ <total-route-count> <star-g-count> <source-count> <star-g-prefix-count> <group-count> <avg-sources-per-group><rem> [ <reason-for-route-stats-pending> ] ] [ TABLE_group <group-addr> <group-mask-len> <source-count-per-grp> [ TABLE_source <route-or-source> [ <name> ] <packets> <bytes> <aps> <pps> <bit-rate-in-bps> <oifs> [ <software-pkts> ] ] ] } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) Multicast VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

mroute

Display IPv6 multicast routing table

summary

(Optional) Display route counts and packet rates

software-forwarded

(Optional) Display software switched route counts only

rp

(Optional) Display RP routes (RP, 0.0.0.0/32)

count

(Optional) Display route counts only

bitfield

(Optional) Display bitfield details

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_addr

(Optional)

mcast-addrs

(Optional)

bidir

(Optional)

pending

(Optional)

uptime

(Optional)

internal

(Optional)

TABLE_mpib

(Optional)

mpib-name

(Optional)

stale-route

(Optional)

TABLE_oif

(Optional)

oif-name

(Optional)

oif-uptime

(Optional)

rpf

(Optional)

oif-list-bitfield

(Optional)

TABLE_oif_mpib

(Optional)

oif-mpib-name

(Optional)

stale-oif

(Optional)

total-route-count

(Optional)

star-g-count

(Optional)

source-count

(Optional)

star-g-prefix-count

(Optional)

group-count

(Optional)

reason-for-route-stats-pending

(Optional)

TABLE_group

(Optional)

group-addr

(Optional)

group-mask-len

(Optional)

source-count-per-grp

(Optional)

TABLE_source

(Optional)

route-or-source

(Optional)

name

(Optional)

packets

(Optional)

bytes

(Optional)

aps

(Optional)

pps

(Optional)

bit-rate-in-bps

(Optional)

oifs

(Optional)

software-pkts

(Optional)

Command Mode

- /exec

show ipv6 mtu

show ipv6 mtu [ statistics | vrf { <vrf-name> | <vrf-known-name> | all [ detail ] } ] [ __readonly__ [ TABLE_mtu_stat <out-ent> <exp-ent> <purge-ent> <int-err> <pkt-too-big> <cache-miss> <cache-upd> <mtu-small> <cache-no-upd> ] [ TABLE_mtu_vrf [ <tot-ipv6-mtu> ] [ TABLE_one_mtu [ <pmtu-cntxt> ] [ { <mtu-ipv6> <mtu-cache> <up-time> <iod-lcache> } ] ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPV6 information

mtu

Display IPV6 Path MTU Cache

statistics

(Optional) Display non-TCP Path MTU Statistics

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display IPV6 Path MTU Cache with detail

__readonly__

(Optional)

TABLE_mtu_stat

(Optional) mtu statistic table

out-ent

(Optional) outstanding entries

exp-ent

(Optional) expired entries

purge-ent

(Optional) purge entries

int-err

(Optional) internal entries

pkt-too-big

(Optional) packets too big meassages received

cache-miss

(Optional) cache misses

cache-upd

(Optional) cache updates

mtu-small

(Optional) too small mtu advertised

cache-no-upd

(Optional) cache no update

TABLE_mtu_vrf

(Optional) MTU vrf table

tot-ipv6-mtu

(Optional) total ipv6 mtu messages

TABLE_one_mtu

(Optional) MTU table

pmtu-cntxt

(Optional) pmtu context

mtu-cache

(Optional) mtu cache

up-time

(Optional) up time

iod-lcache

(Optional) iod lcache

Command Mode

- /exec

show ipv6 multicast vrf

show ipv6 multicast vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <vrf-count> { TABLE_vrf <vrf-name> <cid> <tid> <rc> <gc> <sc> <star_gc> } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

multicast

Display multicast routing VRFs

vrf

Display multicast routing VRFs

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-count

(Optional)

cid

(Optional)

tid

(Optional)

rc

(Optional)

gc

(Optional)

sc

(Optional)

star_gc

(Optional)

Command Mode

- /exec

show ipv6 nd ra dns search-list

show ipv6 nd ra dns search-list [ interface <interface> ] [ __readonly__ { TABLE_intf <intf_name> <dns_supress_server_list> [ { TABLE_list <list_no> <list_name> [ { <finite> | <infinite> } ] <seq_no> } ] } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

dns

Domain Name System

search-list

DNS Search List

interface

(Optional) Display DNS Search List information on interface

interface

(Optional) Interface name to display

__readonly__

(Optional)

TABLE_intf

(Optional) IPV6 Interface name

intf_name

(Optional) Interface name

dns_supress_server_list

(Optional) DNS Supress server list

TABLE_list

(Optional) Search list

list_no

(Optional) Search list number

list_name

(Optional) Search list name

finite

(Optional) Search list life time

infinite

(Optional) Search list infinte time

seq_no

(Optional) Search list sequence number

Command Mode

- /exec

show ipv6 nd ra dns server

show ipv6 nd ra dns server [ interface <interface> ] [ __readonly__ [ { TABLE_intf_name [ <inf-name> ] } ] [ { TABLE_intf [ <dns-recursion-server-list> ] [ <dns-suppresion-server-list> ] [ { TABLE_dns_server [ <dns-server-index> ] [ <dns-server-list> ] [ <lifetime> ] [ <second-seqno> ] } ] [ { TABLE_dns_seq [ <dns-server> ] [ <dns-addr> ] [ <infinite-seq-no> ] } ] } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

dns

Domain Name System

server

Domain Name System Server

interface

(Optional) Display Recursive DNS Server List information on interface

interface

(Optional) Interface name to display

__readonly__

(Optional)

TABLE_intf_name

(Optional) interface table

inf-name

(Optional) interface name

TABLE_intf

(Optional)

dns-recursion-server-list

(Optional) DNS recursion server list

dns-suppresion-server-list

(Optional) DNS suppresion server list

TABLE_dns_server

(Optional) DNS server table

dns-server-index

(Optional) dns server index

dns-server-list

(Optional) dns server list

lifetime

(Optional) server lifetime

second-seqno

(Optional) second sequence number

TABLE_dns_seq

(Optional) DNS sequence table

dns-server

(Optional) dns server

dns-addr

(Optional) dns address

infinite-seq-no

(Optional) infinite sequence number

Command Mode

- /exec

show ipv6 nd raguard policy

show ipv6 nd raguard policy [ <name> ] [ __readonly__ { TABLE_raguard_policy <policy> [ <port_type> ] <device_role> [ <min_hop_limit> ] [ <max_hop_limit> ] [ <mgd_conf_flag> ] [ <other_conf_flag> ] [ <rtr_pref_max> ] [ <ra_prefix_list> ] [ <ipv6_acl> ] [ { TABLE_raguard_targets <target> <target_type> <target_policy> <feature> <target_range> } ] } ]

Syntax Description

name

(Optional) Policy name for feature RA guard

__readonly__

(Optional)

TABLE_raguard_policy

(Optional) IPv6 RA guard policy

policy

(Optional) Policy Name

port_type

(Optional) Port type

device_role

(Optional) Device role

min_hop_limit

(Optional) Minimum hop limit

max_hop_limit

(Optional) Minimum hop limit

mgd_conf_flag

(Optional) Check managed config flag

other_conf_flag

(Optional) Check other config flag

rtr_pref_max

(Optional) Router-preference maxmium

ra_prefix_list

(Optional) Match RA prefix list

ipv6_acl

(Optional) Match IPv6 access list

TABLE_raguard_targets

(Optional) RA Guard Targets table

target

(Optional) Target Name

target_type

(Optional) Target Type

target_policy

(Optional) Policy Name

feature

(Optional) Feature

target_range

(Optional) Target Range

Command Mode

- /exec

show ipv6 nd rt-pref global pt

show ipv6 nd rt-pref global pt

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

nd

ICMPv6 Neighbor Discovery commands

rt-pref

Router Preference

global

Global

pt

PTREE

Command Mode

- /exec

show ipv6 ndp

show ipv6 ndp

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ndp

Show IPv6 neighbors from netstack

Command Mode

- /exec

show ipv6 neighbor binding

show ipv6 neighbor binding [ { { vlan <vlanid> [ details ] } | { { address { <ipv6-addr> | all } } { interface <intfid> vlan <vlanid> [ details ] |

Syntax Description

intfid

(Optional) [details]

show

Show running system information

ipv6

Show the IPv6 features of the system

vlanid

(Optional) Vlan number

Command Mode

- /exec

show ipv6 neighbor binding mac

show ipv6 neighbor binding mac <macaddr> { interface <intfid> vlan <vlanid> [ details ] |

Syntax Description

intfid

[details]

show

Show running system information

ipv6

Show the IPv6 features of the system

macaddr

48-bit hardware address

vlanid

Vlan number

Command Mode

- /exec

show ipv6 neighbor static

show ipv6 neighbor static [ interface <interface> ] [ __readonly__ [ TABLE_i6_nei { <nei-ipv6> <nei-mac> <nei-iod> <nei-if-iod> } ] [ <tot-nei-ent> ] [ TABLE_nei_cnt { <nei-ipv6-tot> <nei-mac-tot> <nei-iod-tot> <nei-if-iod-tot> } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

neighbor

Show IPv6 neighbor entry

static

Displays only static neighbors

interface

(Optional) Display IPv6 related interface information

interface

(Optional) Interface name to display

__readonly__

(Optional)

TABLE_i6_nei

(Optional) ipv6 neighbor table

nei-mac

(Optional) neighbor mac address

nei-iod

(Optional) neighbor iod

nei-if-iod

(Optional) neighbor interface iod

tot-nei-ent

(Optional) total neighbor entries

TABLE_nei_cnt

(Optional) neighbor count table

nei-mac-tot

(Optional) neighbor mac address

nei-iod-tot

(Optional) neighbor iod

nei-if-iod-tot

(Optional) neighbor physical interface iod

Command Mode

- /exec

show ipv6 pim bitfield

show ipv6 pim bitfield

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

bitfield

Display compressed bitfield details

Command Mode

- /exec

show ipv6 pim df

show ipv6 pim df [ <rp-or-group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-context> ] [ { TABLE_rp [ <rp-addr> ] [ <df-ordinal> ] [ <df-bits> ] [ <df-bits-count> ] [ <metric-pref> ] [ <metric> ] [ { TABLE_grange [ <grange-grp> ] [ <grange-masklen> ] } ] [ { TABLE_iod [ <if-name> ] [ <df-winner> ] [ <df-state> ] [ <winner-metric-pref> ] [ <winner-metric> ] [ <uptime> ] [ <is-rpf> ] } ] } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

df

Display Bidir Designated Forwarders

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

TABLE_rp

(Optional)

df-ordinal

(Optional)

df-bits

(Optional)

df-bits-count

(Optional)

metric-pref

(Optional)

metric

(Optional)

TABLE_grange

(Optional)

grange-masklen

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

df-state

(Optional)

winner-metric-pref

(Optional)

winner-metric

(Optional)

uptime

(Optional)

is-rpf

(Optional)

Command Mode

- /exec

show ipv6 pim embed-rp

show ipv6 pim embed-rp <group>

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

embed-rp

Display Embed-RP group address mapping

Command Mode

- /exec

show ipv6 pim event-history

show ipv6 pim [ internal ] event-history { errors | msgs | <pim6-event-hist-buf-name> | statistics }

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

PIM6 global configuration commands

internal

(Optional) Commands for internal use

event-history

Show various event logs of PIM6

errors

Show error logs of PIM6

msgs

Show various message logs of PIM6

pim6-event-hist-buf-name

Show logs of event-hist buffer

statistics

Show state and size of buffers

Command Mode

- /exec

show ipv6 pim fabric info

show ipv6 pim fabric info [ __readonly__ <switch_role> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

fabric

Fabric functionality

info

show the fabric info

__readonly__

(Optional)

switch_role

(Optional)

Command Mode

- /exec

show ipv6 pim fabric legacy-vlans

show ipv6 pim fabric legacy-vlans [ __readonly__ TABLE_legacy_vlan <vlan_id> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

fabric

Fabric functionality

legacy-vlans

Show legacy VLANs on this switch

__readonly__

(Optional)

TABLE_legacy_vlan

(Optional)

vlan_id

(Optional)

Command Mode

- /exec

show ipv6 pim group-range

show ipv6 pim group-range [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-context> ] [ { TABLE_group [ <invalid-grp> ] [ <grp-addr> ] [ <mode> ] [ <rp-addr> ] [ <sh-tree-only-range> ] } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

group-range

Display the various group ranges

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

TABLE_group

(Optional)

invalid-grp

(Optional)

grp-addr

(Optional)

mode

(Optional)

rp-addr

(Optional)

sh-tree-only-range

(Optional)

Command Mode

- /exec

show ipv6 pim interface show ipv6 pim interface

show ipv6 pim interface <interface> | show ipv6 pim interface [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-context> ] [ { TABLE_iod [ <if-name> ] [ <if-addr> ] [ <if-status> ] [ <dr> ] [ <is-iface-in-cib> ] [ <is-pim-enabled> ] [ <if-addr-summary> ] [ <dr-priority> ] [ <no-dr-priority> ] [ <nbr-cnt> ] [ <hello-interval-sec> ] [ <hello-interval-msec> ] [ <hello-timer> ] [ <holdtime-sec> ] [ <holdtime-msec> ] [ <is-border> ] [ <genid> ] [ <isauth-config> ] [ <nbr-policy-name> ] [ <jp-in-policy-name> ] [ <jp-out-policy-name> ] [ <is-passive> ] [ <last-cleared> ] [ <hello-sent> ] [ <hello-rcvd> ] [ <jp-sent> ] [ <jp-rcvd> ] [ <assert-sent> ] [ <assert-rcvd> ] [ <graft-sent> ] [ <graft-rcvd> ] [ <graft-ack-sent> ] [ <graft-ack-rcvd> ] [ <df-offer-sent> ] [ <df-offer-rcvd> ] [ <df-winner-sent> ] [ <df-winner-rcvd> ] [ <df-backoff-sent> ] [ <df-backoff-rcvd> ] [ <pass-sent> ] [ <pass-rcvd> ] [ <cksum-errors> ] [ <invalid-errors> ] [ <invalid-df-errors> ] [ <auth-failed> ] [ <pak-len-errors> ] [ <ver-errors> ] [ <pkts-self> ] [ <pkts-non-nbr> ] [ <pkts-on-passive> ] [ <jp-rcvd-on-rpf> ] [ <jp-rcvd-no-rp> ] [ <jp-rcvd-wrong-rp> ] [ <jp-rcvd-for-ssm> ] [ <jp-rcvd-for-bidir> ] [ <jp-in-policy-filter> ] [ <jp-out-policy-filter> ] } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

interface

Display PIM6 interface related information

interface

Interface name of single interface to display

brief

(Optional) Display one line status per interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

if-addr

(Optional)

dr

(Optional)

nbr-cnt

(Optional)

is-iface-in-cib

(Optional)

is-pim-enabled

(Optional)

is-border

(Optional)

if-addr-summary

(Optional)

if-status

(Optional)

dr-priority

(Optional)

no-dr-priority

(Optional)

hello-interval-sec

(Optional)

hello-interval-msec

(Optional)

hello-timer

(Optional)

holdtime-sec

(Optional)

holdtime-msec

(Optional)

genid

(Optional)

isauth-config

(Optional)

is-passive

(Optional)

nbr-policy-name

(Optional)

jp-in-policy-name

(Optional)

jp-out-policy-name

(Optional)

last-cleared

(Optional)

hello-sent

(Optional)

hello-rcvd

(Optional)

jp-sent

(Optional)

jp-rcvd

(Optional)

assert-sent

(Optional)

assert-rcvd

(Optional)

graft-sent

(Optional)

graft-rcvd

(Optional)

graft-ack-sent

(Optional)

graft-ack-rcvd

(Optional)

df-offer-sent

(Optional)

df-offer-rcvd

(Optional)

df-winner-sent

(Optional)

df-winner-rcvd

(Optional)

df-backoff-sent

(Optional)

df-backoff-rcvd

(Optional)

pass-sent

(Optional)

pass-rcvd

(Optional)

cksum-errors

(Optional)

invalid-errors

(Optional)

invalid-df-errors

(Optional)

auth-failed

(Optional)

pak-len-errors

(Optional)

ver-errors

(Optional)

pkts-self

(Optional)

pkts-non-nbr

(Optional)

pkts-on-passive

(Optional)

jp-rcvd-on-rpf

(Optional)

jp-rcvd-no-rp

(Optional)

jp-rcvd-wrong-rp

(Optional)

jp-rcvd-for-ssm

(Optional)

jp-rcvd-for-bidir

(Optional)

jp-in-policy-filter

(Optional)

jp-out-policy-filter

(Optional)

Command Mode

- /exec

show ipv6 pim neighbor

show ipv6 pim neighbor { [ <interface> ] | [ <ipv6addr> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <out-context> [ TABLE_neighbor <nbr-addr><if-name><uptime><expires> [ <dr-priority> ] <bidir-capable> <bfd-state><name> [ TABLE_secondary <sec-addr> ] ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

neighbor

Display PIM6 neighbor related information

interface

(Optional) Display neighbors on single interface name

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out-context

(Optional)

TABLE_neighbor

(Optional)

dr-priority

(Optional)

bidir-capable

(Optional)

TABLE_secondary

(Optional)

Command Mode

- /exec

show ipv6 pim oif-list

show ipv6 pim oif-list <group> [ <source> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> { TABLE_grp <mcast-addrs> <incoming-intf> <rpf-nbr> <timeout-interval> <oif-list-count> [ { TABLE_oiflist <oif-name> } ] <timeout-list-count> [ { TABLE_timeoutlist <timeoutoif-name> } ] <immediate-list-count> [ { TABLE_immediatelist <immediateoif-name> } ] <immediate-timeout-list-count> [ { TABLE_immediatetimeoutlist <immediatetimeoutoif-name> } ] <sgr-prune-list-count> [ { TABLE_sgrprunelist <sgrprunelistoif-name> } ] } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

oif-list

Display interfaces for oif-list of PIM6 route

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_grp

(Optional)

mcast-addrs

(Optional)

incoming-intf

(Optional)

timeout-interval

(Optional)

oif-list-count

(Optional)

TABLE_oiflist

(Optional)

oif-name

(Optional)

timeout-list-count

(Optional)

TABLE_timeoutlist

(Optional)

timeoutoif-name

(Optional)

immediate-list-count

(Optional)

TABLE_immediatelist

(Optional)

immediateoif-name

(Optional)

immediate-timeout-list-count

(Optional)

TABLE_immediatetimeoutlist

(Optional)

immediatetimeoutoif-name

(Optional)

sgr-prune-list-count

(Optional)

TABLE_sgrprunelist

(Optional)

sgrprunelistoif-name

(Optional)

Command Mode

- /exec

show ipv6 pim policy statistics jp

show ipv6 pim policy statistics { jp-policy | neighbor-policy } <interface> [ __readonly__ { TABLE_routemap <name> <action> <seq_num> [ { TABLE_cmd <command> <match_count> <compare_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

PIM6 global configuration commands

policy

Policy related information

statistics

Policy statistics

jp-policy

Statistics for jp-policy

neighbor-policy

Statistics for neighbor-policy

interface

Interface to display policy statistics for

__readonly__

(Optional)

TABLE_routemap

(Optional)

name

(Optional)

action

(Optional)

seq_num

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

compare_count

(Optional)

match_count

(Optional)

total_accept_count

(Optional)

total_reject_count

(Optional)

Command Mode

- /exec

show ipv6 pim route

show ipv6 pim route { [ bitfield ] | <source> <group> | <group> [ <source> ] [ bitfield ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context-name> <route-count> [ TABLE_one_route <mcast-addrs> [ <rp-addr> <rp-local> ] <bidir> <sgexpire> <is-fabricowned> [ <sgrexpire> ] [ <timeleft> ] <rp-bit> [ <register> ] [ <assert-timeout> ] <intf-name> <rpf-nbr-1> <rpf-nbr-addr> <rpf-nbr-2> [ <metric-pref> <route-metric> ] [ <oif-count> ] [ <oif-bf-str> ] [ <timeout-count> ] [ <timeout-bf-str> ] [ <immediate-count> ] [ <immediate-bf-str> ] [ <immediate-timeout-count> ] [ <immediate-timeout-bf-str> ] [ <sgr-prune-list-count> ] [ <sgr-prune-list-bf-str> ] [ <timeout-interval> <jp-holdtime-rndup> ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

route

Display PIM6 specific route information

bitfield

(Optional) Display details of each bitfield for PIM6 route

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

context-name

(Optional)

route-count

(Optional)

TABLE_one_route

(Optional)

mcast-addrs

(Optional)

rp-addr

(Optional)

rp-local

(Optional)

bidir

(Optional)

sgexpire

(Optional)

is-fabricowned

(Optional)

sgrexpire

(Optional)

timeleft

(Optional)

rp-bit

(Optional)

register

(Optional)

assert-timeout

(Optional)

intf-name

(Optional)

rpf-nbr-1

(Optional)

rpf-nbr-addr

(Optional)

rpf-nbr-2

(Optional)

metric-pref

(Optional)

route-metric

(Optional)

oif-count

(Optional)

oif-bf-str

(Optional)

timeout-count

(Optional)

timeout-bf-str

(Optional)

immediate-count

(Optional)

immediate-bf-str

(Optional)

immediate-timeout-count

(Optional)

immediate-timeout-bf-str

(Optional)

sgr-prune-list-count

(Optional)

sgr-prune-list-bf-str

(Optional)

timeout-interval

(Optional)

jp-holdtime-rndup

(Optional)

Command Mode

- /exec

show ipv6 pim rp-hash

show ipv6 pim rp-hash <group> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-context> ] [ <rp-found> ] [ <is-rp-bsr-learnt> ] [ <out-group> ] [ <hash-length> ] [ <out-bsr> ] [ { TABLE_rp [ <rp-addr> ] [ <hash> ] [ <isbest_hash> ] } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

rp-hash

Display RP hash value for group

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

rp-found

(Optional)

is-rp-bsr-learnt

(Optional)

hash-length

(Optional)

TABLE_rp

(Optional)

hash

(Optional)

isbest_hash

(Optional)

Command Mode

- /exec

show ipv6 pim rp

show ipv6 pim rp [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-context> ] [ <is-bsr-enabled> ] [ <is-bsr-listen-only> ] [ <is-bsr-forward-only> ] [ <are-we-bsr> ] [ <bsr-address> ] [ <is-bsr-address> ] [ <bsr-priority> ] [ <bsr-hash-masklen> ] [ <bs-timer> ] [ <bsr-uptime> ] [ <bsr-expires> ] [ <is-autorp-enabled> ] [ <is-autorp-listen-only> ] [ <is-autorp-forward-only> ] [ <are-we-autorp> ] [ <autorp-address> ] [ <is-autorp-address> ] [ <autorp-dis-timer> ] [ <autorp-up-time> ] [ <autorp-expire-time> ] [ <rp-cand-policy-name> ] [ <bsr-policy-name> ] [ <rp-announce-policy-name> ] [ <rp-discovery-policy-name> ] [ { TABLE_anycast_rp [ <anycast-rp-addr> ] [ { TABLE_arp_rp [ <arp-rp-addr> ] [ <is-rpaddr-local> ] } ] } ] [ { TABLE_rp [ <rp-addr> ] [ <is-rp-in-cib> ] [ <df-ordinal> ] [ <rp-uptime> ] [ <rp-priority> ] [ <autorp-expires> ] [ <bsr-rp-expires> ] [ <autorp-info-src> ] [ <bsr-info-src> ] [ <is-rp-static> ] [ <static-rp-group-map> ] [ { TABLE_grange [ <grange-grp> ] [ <grange-masklen> ] [ <is-bidir-grp> ] [ <is-autorp-rp-owner> ] [ <is-bsr-rp-owner> ] [ <is-static-rp-owner> ] } ] } ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

rp

Display PIM6 RP, Auto-RP, and BSR related information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

is-bsr-enabled

(Optional)

is-bsr-listen-only

(Optional)

is-bsr-forward-only

(Optional)

are-we-bsr

(Optional)

is-bsr-address

(Optional)

bsr-priority

(Optional)

bsr-hash-masklen

(Optional)

bs-timer

(Optional)

bsr-uptime

(Optional)

bsr-expires

(Optional)

is-autorp-enabled

(Optional)

is-autorp-listen-only

(Optional)

is-autorp-forward-only

(Optional)

are-we-autorp

(Optional)

is-autorp-address

(Optional)

autorp-dis-timer

(Optional)

autorp-up-time

(Optional)

autorp-expire-time

(Optional)

rp-cand-policy-name

(Optional)

bsr-policy-name

(Optional)

rp-announce-policy-name

(Optional)

rp-discovery-policy-name

(Optional)

TABLE_anycast_rp

(Optional)

TABLE_arp_rp

(Optional)

is-rpaddr-local

(Optional)

TABLE_rp

(Optional)

is-rp-in-cib

(Optional)

df-ordinal

(Optional)

rp-uptime

(Optional)

rp-priority

(Optional)

autorp-expires

(Optional)

bsr-rp-expires

(Optional)

is-rp-static

(Optional)

static-rp-group-map

(Optional)

TABLE_grange

(Optional)

grange-masklen

(Optional)

is-bidir-grp

(Optional)

is-autorp-rp-owner

(Optional)

is-bsr-rp-owner

(Optional)

is-static-rp-owner

(Optional)

Command Mode

- /exec

show ipv6 pim statistics

show ipv6 pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <uptime> ] [ <reg-sent> ] [ <reg-rcvd> ] [ <null-reg-sent> ] [ <null-reg-rcvd> ] [ <reg-stop-sent> ] [ <reg-stop-rcvd> ] [ <reg-rcvd-not-rp> ] [ <reg-rcvd-for-ssm> ] [ <reg-rcvd-for-bidir> ] [ <bootstrap-sent> ] [ <bootstrap-rcvd> ] [ <cand-rp-sent> ] [ <cand-rp-rcvd> ] [ <bs-no-nbr> ] [ <bs-border-deny> ] [ <bs-len-errors> ] [ <bs-rpf-failed> ] [ <bs-no-listen> ] [ <candrp-border-deny> ] [ <candrp-no-listen> ] [ <autorp-announce-sent> ] [ <autorp-announce-rcvd> ] [ <autorp-discovery-sent> ] [ <autorp-discovery-rcvd> ] [ <autorp-rpf-failed> ] [ <autorp-border-deny> ] [ <autorp-invalid-type> ] [ <autorp-ttl-expired> ] [ <autorp-no-listen> ] [ <ctrl-no-route> ] [ <data-no-route> ] [ <no-state> ] [ <create-state> ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

statistics

Packet counter statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

uptime

(Optional)

reg-sent

(Optional)

reg-rcvd

(Optional)

null-reg-sent

(Optional)

null-reg-rcvd

(Optional)

reg-stop-sent

(Optional)

reg-stop-rcvd

(Optional)

reg-rcvd-not-rp

(Optional)

reg-rcvd-for-ssm

(Optional)

reg-rcvd-for-bidir

(Optional)

bootstrap-sent

(Optional)

bootstrap-rcvd

(Optional)

cand-rp-sent

(Optional)

cand-rp-rcvd

(Optional)

bs-no-nbr

(Optional)

bs-border-deny

(Optional)

bs-len-errors

(Optional)

bs-rpf-failed

(Optional)

bs-no-listen

(Optional)

candrp-border-deny

(Optional)

candrp-no-listen

(Optional)

autorp-announce-sent

(Optional)

autorp-announce-rcvd

(Optional)

autorp-discovery-sent

(Optional)

autorp-discovery-rcvd

(Optional)

autorp-rpf-failed

(Optional)

autorp-border-deny

(Optional)

autorp-invalid-type

(Optional)

autorp-ttl-expired

(Optional)

autorp-no-listen

(Optional)

ctrl-no-route

(Optional)

data-no-route

(Optional)

no-state

(Optional)

create-state

(Optional)

Command Mode

- /exec

show ipv6 pim vrf

show ipv6 pim vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ detail ] [ __readonly__ TABLE_context [ <out-context> ] [ <context-id> ] [ <count> ] [ <table-id> ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

vrf

Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs PIM6 is configured for

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_context

(Optional)

out-context

(Optional)

context-id

(Optional)

table-id

(Optional)

count

(Optional)

Command Mode

- /exec

show ipv6 policy

show ipv6 policy [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_pbr [ <interface> ] [ <rmap> ] [ <status> ] [ <vrf_name> ] } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

policy

Policy routing

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_pbr

(Optional)

interface

(Optional)

rmap

(Optional)

status

(Optional)

vrf_name

(Optional)

Command Mode

- /exec

show ipv6 prefix-list

show ipv6 prefix-list { { [ detail | summary ] [ <ipv6-pfl-name> | <ipv6-pfl-cfg-name> ] } | { { <ipv6-pfl-name> | <ipv6-pfl-cfg-name> } seq <seq-no> } | { { <ipv6-pfl-name> | <ipv6-pfl-cfg-name> } <prefix> [ first-match | longer ] } } [ __readonly__ TABLE_ipv6_pfl <name> <seq> <action> <rule> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

detail

(Optional) Show detailed information

summary

(Optional) Show summarized information

prefix-list

List IPv6 prefix lists

ipv6-pfl-name

(Optional) Name of prefix-list

ipv6-pfl-cfg-name

(Optional) Known prefix-list name

seq

Sequence number

seq-no

Sequence number

first-match

(Optional) Find the first match

longer

(Optional) Find the more specific entries

__readonly__

(Optional)

TABLE_ipv6_pfl

(Optional)

name

(Optional)

seq

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ipv6 process

show ipv6 process [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ipv6_all { <cnxt-name> <cnxt-id> } ] [ TABLE_ipv6 { <ipv6-vrf> <ipv6-vrf-id> <auto-disc> <auto-add> <sta-disc> <sta-def> [ <ipv6-unreach> ] } [ TABLE_iod { <iod-val> <iod-ifind> } ] [ TABLE_ipv6_nxt { <ipv6-nxt> } ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

process

Display IPv6 global information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs

__readonly__

(Optional)

TABLE_ipv6_all

(Optional) IPV6 process table

cnxt-name

(Optional) context name

cnxt-id

(Optional) context name

TABLE_ipv6

(Optional) ipv6 table

ipv6-vrf

(Optional) vrf name

ipv6-vrf-id

(Optional) vrf id

auto-disc

(Optional) auto discard

auto-add

(Optional) auto add

sta-disc

(Optional) static discard

sta-def

(Optional) static def

ipv6-unreach

(Optional) ipv6 unreachable

TABLE_iod

(Optional) IOD table

iod-val

(Optional) iod value

iod-ifind

(Optional) iod if index

TABLE_ipv6_nxt

(Optional) ipv6 next hop table

Command Mode

- /exec

show ipv6 process sdb

show ipv6 process sdb

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

process

Display IPv6 global information

sdb

Dump IPv6 sdb in a file

Command Mode

- /exec

show ipv6 raguard statistics

show ipv6 raguard statistics [ interface <intf-range> ] [ __readonly__ <msg_stats_hdr> <intf2> <rx_pkts> <drop_count> ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

raguard

IPV6 raguard

statistics

RA packet drop count

interface

(Optional) Raguard enabled interfaces

intf-range

(Optional) interface

__readonly__

(Optional) Read only

msg_stats_hdr

(Optional)

intf2

(Optional) interface name

rx_pkts

(Optional)

drop_count

(Optional)

Command Mode

- /exec

show ipv6 rip policy statistics redistribute

show ipv6 rip [ instance <inst> ] policy statistics redistribute { bgp <as> | { eigrp | isis | <src-rip> | ospfv3 | lisp } <tag> | direct | static } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> { TABLE_rmap <name> <action> <seq_num> [ { TABLE_cmd <command> <compare_count> <match_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

policy

Policy related information

statistics

Policy statistics

redistribute

RIP redistribute routes from other routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

isis

Intermediate-to-intermediate (ISIS)

src-rip

Routing Information Protocol (RIP)

ospfv3

Open Shortest Path First (OSPFv3)

lisp

LISP EID-prefixes

tag

Process tag

direct

Directly connected routes

static

Static routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_rmap

(Optional) Routemap table

name

(Optional) Route-map Name

action

(Optional) Route-map action

seq_num

(Optional) Sequence number of the rule in route-map

TABLE_cmd

(Optional) Route-map command table

command

(Optional) Route-map command

compare_count

(Optional) Number of comparisons

match_count

(Optional) Number of matches

total_accept_count

(Optional) Total number of packets accepted by the policy

total_reject_count

(Optional) Total number of packets rejected by the policy

Command Mode

- /exec

show ipv6 route

show ipv6 route [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ipv6-addr> | { <ipv6-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <ipv6-protocol> [ all ] } | { next-hop <next-hop> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | { [ detail ] [ deleted ] } ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> [ <attached> ] TABLE_path [ <ubest> ] [ <mbest> ] [ <ipnexthop> ] [ <ifname> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <stalelbl> ] [ <hidden> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientnameuni> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientnamemulti> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

route

Display IPv6 routing table

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

l3vm-info

(Optional) Display corresponding L3VM information

rpf

(Optional) Display RPF information for multicast source

longer-prefixes

(Optional) Display matching routes with mask-lengths >= prefix

shorter-prefixes

(Optional) Display matching routes with mask-lengths <= prefix

ipv6-protocol

(Optional) Display routes for protocol (or route type)

all

(Optional) Display routes for protocol for backup next-hops too

next-hop

(Optional) Display routes with this next-hop only

interface

(Optional) Display routes with this output interface only

interface

(Optional) Interface Name

updated

(Optional) Display routes filtered by last updated time

since

(Optional) Display those routes updated since this time

stime

(Optional) Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

until

(Optional) Display those routes updated until this time

utime

(Optional) Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

summary

(Optional) Display route counts

deleted

(Optional) Display delete-pending routes also

detail

(Optional) Display routes in full detail

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ubest

(Optional)

mbest

(Optional)

ifname

(Optional)

pref

(Optional)

tag

(Optional)

metric

(Optional)

uptime

(Optional)

clientname

(Optional)

type

(Optional)

stale

(Optional)

stalelbl

(Optional)

hidden

(Optional)

TABLE_summary

(Optional)

routes

(Optional)

paths

(Optional)

multicast_paths

(Optional)

TABLE_unicast

(Optional)

clientnameuni

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_multicast

(Optional)

clientnamemulti

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_route_count

(Optional)

mask_len

(Optional)

count

(Optional)

Command Mode

- /exec

show ipv6 routers

show ipv6 routers [ all-routers ] [ [ interface <interface> ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] ] [ __readonly__ { TABLE_ipv6_routers [ TABLE_interface_ipv6 { <rtr-ipv6> <ipv6-int-addr> <rtr-flo-time> <curr-hop-lmt> <life-time> <addr-flag> <other-flg> <mtu-rtr> <hm-agent-flg> <preference> <reach-time> <retrans-time> [ TABLE_prefix_ipv6 { <ipv6-prefix> <buf-ipv6> <buf-autono> <valid-life-time> <prefer-life> } ] } ] } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

routers

Display neighbor router information

all-routers

(Optional) All routers even on down interface

interface

(Optional) Display neighbor router information on interface

interface

(Optional) Interface name to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_ipv6_routers

(Optional) ipv6 router table

TABLE_interface_ipv6

(Optional) ipv6 interface table

ipv6-int-addr

(Optional) ipv6 interface address

rtr-flo-time

(Optional) last updated time

curr-hop-lmt

(Optional) current hop limit

life-time

(Optional) life time

addr-flag

(Optional) address flag

other-flg

(Optional) other flag

mtu-rtr

(Optional) router MTU

hm-agent-flg

(Optional) home agent flag

preference

(Optional) preference

reach-time

(Optional) reachable time

retrans-time

(Optional) retransmission time

TABLE_prefix_ipv6

(Optional) ipv6 prefix table

ipv6-prefix

(Optional) ipv6 prefix

buf-ipv6

(Optional) ipv6 buffer

buf-autono

(Optional) ipv6 buffer autonomous flag

valid-life-time

(Optional) ipv6 valid life time

prefer-life

(Optional) ipv6 preferred life time

Command Mode

- /exec

show ipv6 snooping capture-policy

show ipv6 snooping capture-policy [ vlan <vlanid> ] [ interface <intf> ] [ __readonly__ <cmdout> ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

vlanid

(Optional) VLAN ID

intf

(Optional) interface

__readonly__

(Optional)

cmdout

(Optional)

Command Mode

- /exec

show ipv6 snooping counters vlan

show ipv6 snooping counters { { vlan <vlanid> } | { interface <intf> } } [ __readonly__ [ { TABLE_target_counters <target> [ { TABLE_protocol_msgs <protocol_name> [ { TABLE_sub_protocol_msgs [ <subfield_name> ] [ <msg_count> ] } ] } ] [ { TABLE_bridged_msgs <protocol_name> [ { TABLE_sub_protocol_msgs [ <subfield_name> ] [ <msg_count> ] } ] } ] [ { TABLE_dropped_msgs <feature_name> <protocol_name> [ { TABLE_sub_protocol_msgs [ <subfield_name> ] [ <msg_count> ] [ <drop_reason> ] } ] } ] } ] ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

vlanid

VLAN ID

intf

interface

__readonly__

(Optional)

TABLE_target_counters

(Optional) Policy counters per target

target

(Optional) Target Name

TABLE_protocol_msgs

(Optional) Protocol messages table

protocol_name

(Optional) Protocol name

TABLE_sub_protocol_msgs

(Optional) Protocol sub-messages table

subfield_name

(Optional) Sub-field name

msg_count

(Optional) Message count

TABLE_bridged_msgs

(Optional) Bridged messages table

protocol_name

(Optional) Protocol name

TABLE_sub_protocol_msgs

(Optional) Protocol sub-messages table

subfield_name

(Optional) Sub-field name

msg_count

(Optional) Message count

TABLE_dropped_msgs

(Optional) Bridged messages table

feature_name

(Optional) Feature name

protocol_name

(Optional) Protocol name

TABLE_sub_protocol_msgs

(Optional) Protocol sub-messages table

subfield_name

(Optional) Sub-field name

msg_count

(Optional) Message count

drop_reason

(Optional) Drop reason

Command Mode

- /exec

show ipv6 snooping events

show ipv6 snooping events [ __readonly__ <cmdout> ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

__readonly__

(Optional)

cmdout

(Optional)

Command Mode

- /exec

show ipv6 snooping features

show ipv6 snooping features [ __readonly__ { TABLE_features <name> <priority> <state> } ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

__readonly__

(Optional)

TABLE_features

(Optional) IPv6 Snooping Features

name

(Optional) Name

priority

(Optional) Priority

state

(Optional) State

Command Mode

- /exec

show ipv6 snooping messages

show ipv6 snooping messages [ detailed <count> ] [ __readonly__ <cmdout> ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

count

(Optional) Number of messages to display

__readonly__

(Optional)

cmdout

(Optional)

Command Mode

- /exec

show ipv6 snooping policies

show ipv6 snooping policies { [ vlan <vlanid> ] | [ interface <intf> ] } [ __readonly__ { TABLE_policies <target> <target_type> <policy> <feature> <target_range> } ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

vlanid

(Optional) VLAN ID

intf

(Optional) interface

__readonly__

(Optional)

TABLE_policies

(Optional) IPv6 Snooping Policies

target

(Optional) Target Name

target_type

(Optional) Target Type

policy

(Optional) Policy Name

feature

(Optional) Feature

target_range

(Optional) Target Range

Command Mode

- /exec

show ipv6 snooping policy

show ipv6 snooping policy [ <policy_name> ] [ __readonly__ { [ TABLE_glean_policy <policy> [ <port_type> ] <sec_lvl> <device_role> [ <data_glean> ] [ <dest_glean> ] [ <glean_type> ] [ <reachable_lifetime> ] [ <stale_lifetime> ] { [ TABLE_non_glean_protocols | TABLE_glean_protocols # 395 ../feature/sisf/core/nxos/src/sisf_glean_dme.cmd <protocol> [ <prefix_list> ] ] } [ <limit_address_cnt> ] [ <limit_address_cnt_v4_per_mac> ] [ <limit_address_cnt_v6_per_mac> ] [ <limit_address_cnt_v4_per_target> ] [ <tracking> ] { [ TABLE_targets <target> <target_type> <target_policy> <feature> <target_range> ] } ] } ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

policy_name

(Optional) Policy name for feature snooping

__readonly__

(Optional)

TABLE_glean_policy

(Optional) IPv6 DHCP guard policy

policy

(Optional) Policy Name

port_type

(Optional) Port type

sec_lvl

(Optional) Security level

device_role

(Optional) Device role

data_glean

(Optional) Data glean

dest_glean

(Optional) Destination glean

glean_type

(Optional) Glean type

reachable_lifetime

(Optional) Reachable lifetime

stale_lifetime

(Optional) Stale lifetime

TABLE_non_glean_protocols

(Optional) Non Glean protocols

protocol

(Optional) Protocol

TABLE_glean_protocols

(Optional) Glean protocols

prefix_list

(Optional) Prefix list

limit_address_cnt

(Optional) Limit address count

limit_address_cnt_v4_per_mac

(Optional) Limit address count v4 per mac

limit_address_cnt_v6_per_mac

(Optional) Limit address count v6 per mac

limit_address_cnt_v4_per_target

(Optional) Limit address count v4 per target

tracking

(Optional) Tracking

TABLE_targets

(Optional) Targets table

target

(Optional) Target Name

target_type

(Optional) Target Type

target_policy

(Optional) Policy Name

feature

(Optional) Feature

target_range

(Optional) Target Range

Command Mode

- /exec

show ipv6 snooping pss database

show ipv6 snooping pss database [ __readonly__ <cmdout> ]

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

__readonly__

(Optional)

cmdout

(Optional)

Command Mode

- /exec

show ipv6 static-route

show ipv6 static-route [ <prefix> ] [ multicast ] [ track-table ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <vrf-name-out> ] [ TABLE_route [ <prefix-out> ] [ <next-hop> ] [ <intf-name> ] [ <pref> ] [ <next-hop-vrf> ] [ <reslv-tid> ] [ <real-nh> ] [ <has-real-intf> ] [ <real-intf-name> ] [ <track-id> ] [ <track-status> ] [ <rnh-status> ] [ <bfd-status> ] ] ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

static-route

Display configured static routes

multicast

(Optional) Display configured static mroutes

track-table

(Optional) Display track object details associated with static routes

all

(Optional) Display all VRFs

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name-out

(Optional) vrf name

TABLE_route

(Optional) Route table

intf-name

(Optional) interface name

pref

(Optional) interface prefix

next-hop-vrf

(Optional) next hop vrf

reslv-tid

(Optional) reslv tid

has-real-intf

(Optional) has real interface

real-intf-name

(Optional) real interface name

track-id

(Optional) interface track id

track-status

(Optional) interface track status

rnh-status

(Optional) interface rnh status

bfd-status

(Optional) interface bfd status

Command Mode

- /exec

show ipv6 statistics

show ipv6 statistics

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

statistics

Display IPv6 global statistics

Command Mode

- /exec

show ipv6 traffic

show ipv6 traffic [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ TABLE_vrf <vrf-name-out> ] TABLE_ipv6_traffic <uptime> <upkt-fwd> <mpkt-fwd> <ubyte-fwd> <mbyte-fwd> <upkt-orig> <mpkt-orig> <ubyte-orig> <mbyte-orig> <upkt-consumed> <mpkt-consumed> <ubyte-consumed> <mbyte-consumed> <ufrag-orig> <mfra-orig> <ufrag-consumed> <mfrag-consumed> <bad-version> <rt-lookup-fail> <hoplimit-excd> <opt-header-error> <pld-length-too-small> <pm-failed> <mbuf-error> <could-not-enc> <dest-if-down> <rx-pkts-recv> <rx-bytes-recv> <rx-inhdrerrors> <rx-innoroutes> <rx-inaddrerrors> <rx-inunknownprotos> <rx-intruncatedpkts> <rx-inforwdgrams> <rx-reasmreqds> <rx-reasmoks> <rx-reasmfails> <rx-indiscards> <rx-indelivers> <rx-inmcastpkts> <rx-inmcastbytes> <tx-pkts-sent> <tx-bytes-sent> <tx-outrequests> <tx-outnoroutes> <tx-outforwdgrams> <tx-outdiscards> <tx-outfragreqds> <tx-outfragoks> <tx-outfragfails> <tx-outfragcreates> <tx-outtransmits> <tx-outmcastpkts> <tx-outmcastbytes> ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

traffic

Display IPv6 traffic statistics

detail

(Optional) Display per protocol IPv6 statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name-out

(Optional) vrf name

TABLE_ipv6_traffic

(Optional) ipv6 traffic table

uptime

(Optional) up time

upkt-fwd

(Optional) unicast packets forward

mpkt-fwd

(Optional) multicast packets forward

ubyte-fwd

(Optional) unicast byte forward

mbyte-fwd

(Optional) multicast byte forward

upkt-orig

(Optional) unicast packet origin

mpkt-orig

(Optional) multicast packet origin

ubyte-orig

(Optional) unicast byte origin

mbyte-orig

(Optional) multicast byte origin

upkt-consumed

(Optional) unicast packet consumed

mpkt-consumed

(Optional) multicast packet consumed

ubyte-consumed

(Optional) unicast byte consumed

mbyte-consumed

(Optional) multicast byte consumed

ufrag-orig

(Optional) unicast fragment origin

mfra-orig

(Optional) multicast fragment origin

ufrag-consumed

(Optional) unicast fragment consumed

mfrag-consumed

(Optional) multicast fragment consumed

bad-version

(Optional) bad version

rt-lookup-fail

(Optional) route lookup fail

hoplimit-excd

(Optional) hoplimit exceeded

opt-header-error

(Optional) opt header error

pld-length-too-small

(Optional) pld lenght too small

pm-failed

(Optional) packet manager failed

mbuf-error

(Optional) m-buffer error

could-not-enc

(Optional) could not encode

dest-if-down

(Optional) destination if down

rx-pkts-recv

(Optional) packets received

rx-bytes-recv

(Optional) bytes received

rx-inhdrerrors

(Optional) inhdr error

rx-innoroutes

(Optional) in-no routes

rx-inaddrerrors

(Optional) in-address error

rx-inunknownprotos

(Optional) in-unknown protocol

rx-intruncatedpkts

(Optional) in-truncated packets

rx-inforwdgrams

(Optional) in-forward

rx-reasmreqds

(Optional) reasm request

rx-reasmoks

(Optional) reasm ok

rx-reasmfails

(Optional) reasm fail

rx-indiscards

(Optional) in-discards

rx-indelivers

(Optional) in-delivers

rx-inmcastpkts

(Optional) in multicast packets

rx-inmcastbytes

(Optional) in multicast bytes

tx-pkts-sent

(Optional) packets sent

tx-bytes-sent

(Optional) bytes sent

tx-outrequests

(Optional) out request

tx-outnoroutes

(Optional) out no routes

tx-outforwdgrams

(Optional) out forwardgrams

tx-outdiscards

(Optional) out discards

tx-outfragreqds

(Optional) out fragment request

tx-outfragoks

(Optional) out fragment oks

tx-outfragfails

(Optional) out fragment fails

tx-outfragcreates

(Optional) out fragment creates

tx-outtransmits

(Optional) out transmits

tx-outmcastpkts

(Optional) out multicast packets

tx-outmcastbytes

(Optional) out multicast bytes

Command Mode

- /exec

show isis

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ process | protocol ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <instance_num> <uuid> <process-id> <vrf-name-out> <system-id-out> <is-type-out> <sap-out> <qh-out> <mtu-out> [ <gr-status-out> ] [ <gr-state-active-out> ] [ <gr-state-inactive-out> ] [ <last-gr-status-fail-out> ] [ <last-gr-status-success-out> ] [ <last-gr-status-none-out> ] [ <gr-status-disable-out> ] [ TABLE_afi_safi <af-ix> <af-bfd-config> <af-pib-tag> ] <metric-style> <accept-metric> [ <net-set-none> ] [ TABLE_area_addr <area-addr-nsap> ] [ <proc-state-not-config> ] [ <proc-state-admin-down> ] [ <proc-state-l3vm-down> ] [ <proc-state-unknown-down> ] [ <proc-state-not-specified> ] [ <proc-state-no-net> ] [ <proc-state-no-vrf-id> ] [ <proc-state-out-memory> ] [ <proc-state-restart> ] [ <proc-state-running> ] <vrf-id-out> [ TABLE_te <te-lvl-out> <te-lvl-active> ] [ <te-ted-out> ] [ <mpls-te-out> ] [ TABLE_mpls_te [ <mpls-te-lvl-out> ] [ <mpls-te-rtrid-intf-out> ] [ <mpls-te-fa-lvl-out> ] [ TABLE_te_fa <te-fa-sysid-out> <te-fa-intf-out> ] ] [ <te-stat-sys-id-out> ] [ <te-stat-rtr-id-out> ] [ TABLE_te_stat_lvl <te-stat-lvl-out> <te-stat-up-out> <te-stat-down-out> ] [ TABLE_segment_routing <af-out> <ptag-out> <cfg-out> <enable-out> [ <exp-null-cfg> ] ] [ TABLE_iib_list_yeild <intf-name-out> ] [ TABLE_auth <auth-lvl-out> [ <auth-type-no-type> ] [ <auth-type-cleartext> ] [ <auth-type-md5> ] [ <auth-type-key-chain> ] [ <auth-type-none> ] [ <auth-check> ] [ <auth-no-check> ] ] [ TABLE_spf <spf-lvl-out> [ <spf-timer> ] ] [ TABLE_distribute_ls <distribute-linkst-lvl> ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

process

(Optional) Display IS-IS process information

protocol

(Optional) Display IS-IS process information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

instance_num

(Optional)

uuid

(Optional)

process-id

(Optional)

vrf-name-out

(Optional)

system-id-out

(Optional)

is-type-out

(Optional)

sap-out

(Optional)

qh-out

(Optional)

mtu-out

(Optional)

gr-status-out

(Optional)

gr-state-active-out

(Optional)

gr-state-inactive-out

(Optional)

last-gr-status-fail-out

(Optional)

last-gr-status-success-out

(Optional)

last-gr-status-none-out

(Optional)

gr-status-disable-out

(Optional)

TABLE_afi_safi

(Optional)

af-ix

(Optional)

af-bfd-config

(Optional)

af-pib-tag

(Optional)

metric-style

(Optional)

accept-metric

(Optional)

net-set-none

(Optional)

TABLE_area_addr

(Optional)

area-addr-nsap

(Optional)

proc-state-not-config

(Optional)

proc-state-admin-down

(Optional)

proc-state-l3vm-down

(Optional)

proc-state-unknown-down

(Optional)

proc-state-not-specified

(Optional)

proc-state-no-net

(Optional)

proc-state-no-vrf-id

(Optional)

proc-state-out-memory

(Optional)

proc-state-restart

(Optional)

proc-state-running

(Optional)

vrf-id-out

(Optional)

TABLE_te

(Optional)

te-lvl-out

(Optional)

te-lvl-active

(Optional)

te-ted-out

(Optional)

mpls-te-out

(Optional)

TABLE_mpls_te

(Optional)

mpls-te-lvl-out

(Optional)

mpls-te-rtrid-intf-out

(Optional)

mpls-te-fa-lvl-out

(Optional)

TABLE_te_fa

(Optional)

te-fa-sysid-out

(Optional)

te-fa-intf-out

(Optional)

te-stat-sys-id-out

(Optional)

te-stat-rtr-id-out

(Optional)

TABLE_te_stat_lvl

(Optional)

te-stat-lvl-out

(Optional)

te-stat-up-out

(Optional)

te-stat-down-out

(Optional)

TABLE_segment_routing

(Optional)

af-out

(Optional)

ptag-out

(Optional)

cfg-out

(Optional)

enable-out

(Optional)

exp-null-cfg

(Optional)

TABLE_iib_list_yeild

(Optional)

intf-name-out

(Optional)

TABLE_auth

(Optional)

auth-lvl-out

(Optional)

auth-type-no-type

(Optional)

auth-type-cleartext

(Optional)

auth-type-md5

(Optional)

auth-type-key-chain

(Optional)

auth-type-none

(Optional)

auth-check

(Optional)

auth-no-check

(Optional)

TABLE_spf

(Optional)

spf-lvl-out

(Optional)

spf-timer

(Optional)

TABLE_distribute_ls

(Optional)

distribute-linkst-lvl

(Optional)

Command Mode

- /exec

show isis adjacency

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] adjacency [ <interface> [ p2p-level-1-2 ] ] { [ system-id <sid> ] | [ detail ] | [ summary ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <adj-summary-out> <adj-interface-out> [ <adj-interface-name-out> ] [ { TABLE_process_adj <adj-sys-name-out> <adj-sys-id-out> [ <adj-usage-out> ] [ <adj-level-out> ] <adj-state-out> <adj-hold-time-out> <adj-intf-name-out> <adj-detail-set-out> [ { <adj-transitions-out> <adj-flap-out> [ <adj-flap-time-out> ] <adj-ckt-type-out> <adj-ipv4-addr-out> <adj-ipv6-addr-out> <adj-bcast-out> [ { <adj-ckt-id-out> <adj-lan-prio-out> } ] <adj-bfd-ipv4-establish-out> <adj-bfd-ipv6-establish-out> <adj-resurrect-out> [ { <adj-resurrect-count-out> <adj-resurrect-hwm-out> } ] <adj-restart-capable-out> <adj-restart-ack-out> [ { <adj-restart-mode-out> <adj-restart-adj-seen-ra-out> <adj-restart-adj-seen-csnp-out> <adj-restart-adj-seen-l1-csnp-out> <adj-restart-adj-seen-l2-csnp-out> <adj-restart-suppress-adj-out> } ] [ { TABLE_adj_sid <adj-sid-value> <adj-sid-f-flag> <adj-sid-b-flag> <adj-sid-v-flag> <adj-sid-l-flag> <adj-sid-s-flag> <adj-sid-p-flag> <adj-sid-weight> } ] } ] } ] [ { TABLE_p2p_adj_sum <adj-summ-p2p-level-out> <adj-summ-p2p-state-out> <adj-summ-p2p-count-out> } ] [ { TABLE_lan_adj_sum <adj-summ-lan-level-out> <adj-summ-lan-state-out> <adj-summ-lan-count-out> } ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

adjacency

Display IS-IS adjacency information

interface

(Optional) IS-IS interface

system-id

(Optional) Hostname or System ID

sid

(Optional) Hostname or System ID (in the form of XXXX.XXXX.XXXX)

detail

(Optional) Display IS-IS adjacency detail information

p2p-level-1-2

(Optional) Display IS-IS point-to-point information at level-1-2

summary

(Optional) Display IS-IS adjacency summary information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

adj-summary-out

(Optional)

adj-interface-out

(Optional)

adj-interface-name-out

(Optional)

TABLE_process_adj

(Optional)

adj-sys-name-out

(Optional)

adj-sys-id-out

(Optional)

adj-usage-out

(Optional)

adj-level-out

(Optional)

adj-state-out

(Optional)

adj-hold-time-out

(Optional)

adj-intf-name-out

(Optional)

adj-detail-set-out

(Optional)

adj-transitions-out

(Optional)

adj-flap-out

(Optional)

adj-flap-time-out

(Optional)

adj-ckt-type-out

(Optional)

adj-ipv4-addr-out

(Optional)

adj-ipv6-addr-out

(Optional)

adj-bcast-out

(Optional)

adj-ckt-id-out

(Optional)

adj-lan-prio-out

(Optional)

adj-bfd-ipv4-establish-out

(Optional)

adj-bfd-ipv6-establish-out

(Optional)

adj-resurrect-out

(Optional)

adj-resurrect-count-out

(Optional)

adj-resurrect-hwm-out

(Optional)

adj-restart-capable-out

(Optional)

adj-restart-ack-out

(Optional)

adj-restart-mode-out

(Optional)

adj-restart-adj-seen-ra-out

(Optional)

adj-restart-adj-seen-csnp-out

(Optional)

adj-restart-adj-seen-l1-csnp-out

(Optional)

adj-restart-adj-seen-l2-csnp-out

(Optional)

adj-restart-suppress-adj-out

(Optional)

TABLE_adj_sid

(Optional)

adj-sid-value

(Optional)

adj-sid-f-flag

(Optional)

adj-sid-b-flag

(Optional)

adj-sid-v-flag

(Optional)

adj-sid-l-flag

(Optional)

adj-sid-s-flag

(Optional)

adj-sid-p-flag

(Optional)

adj-sid-weight

(Optional)

TABLE_p2p_adj_sum

(Optional)

adj-summ-p2p-level-out

(Optional)

adj-summ-p2p-state-out

(Optional)

adj-summ-p2p-count-out

(Optional)

TABLE_lan_adj_sum

(Optional)

adj-summ-lan-level-out

(Optional)

adj-summ-lan-state-out

(Optional)

adj-summ-lan-count-out

(Optional)

Command Mode

- /exec

show isis csnp

show isis [ <isis-tag> ] csnp [ detail ] [ __readonly__ TABLE_process_tag <process-tag-out> [ { TABLE_CSNPLEVEL <csnp-level> <csnp-cache-valid> <csnp-cache-hit> <cscnp-cache-miss> <csnp-hit-rate> [ { TABLE_CSNPLSPS <csnp-start-lsp-id> <csnp-end-lsp-id> <csnp-entry-valid> <csnp-pdu-lengh> [ { TABLE_CSNPONELSP <csnp-lsp-id> <csnp-lsp-seq-num> <csnp-lsp-chk-sum> <csnp-lsp-life-time> } ] } ] } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

csnp

Display IS-IS CSNP cache contents

detail

(Optional) Display detailed IS-IS information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_CSNPLEVEL

(Optional)

csnp-level

(Optional)

csnp-cache-valid

(Optional)

csnp-cache-hit

(Optional)

cscnp-cache-miss

(Optional)

csnp-hit-rate

(Optional)

TABLE_CSNPLSPS

(Optional)

csnp-start-lsp-id

(Optional)

csnp-end-lsp-id

(Optional)

csnp-entry-valid

(Optional)

csnp-pdu-lengh

(Optional)

TABLE_CSNPONELSP

(Optional)

csnp-lsp-id

(Optional)

csnp-lsp-seq-num

(Optional)

csnp-lsp-chk-sum

(Optional)

csnp-lsp-life-time

(Optional)

Command Mode

- /exec

show isis database

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ <level> ] [ detail | advertise | summary ] [ <lid> ] { [ zero-sequence ] | [ ip prefix <ip-prefix> ] | [ ipv6 prefix <ipv6-prefix> ] | [ router-id <rid> ] | [ adjacency <adj-id> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> [ <dbase-hname-absent-out> ] [ { TABLE_process_lvl <dbase-level-out> [ { TABLE_process_lsp <dbase-lsp-name-out> <dbase-lsp-status-out> <dbase-lsp-absent-out> [ { <dbase-lsp-seqnum-out> <dbase-lsp-cksum-out> [ <dbase-lsp-lifetime-str-out> ] [ <dbase-lsp-lifetime-out> ] <dbase-att-out> <dbase-partition-out> <dbase-overload-out> <dbase-istype-out> } ] [ { <dbase-lsp-instance-out> [ { TABLE_process_tlv <dbase-lsp-tlv-name-out> [ <dbase-lsp-area-addr-out> ] [ <dbase-lsp-is-nbr-name-out> ] [ <dbase-lsp-is-nbr-metric-out> ] [ <dbase-lsp-is-nbr-ext-metric-out> ] [ <dbase-lsp-es-nbr-name-out> ] [ <dbase-lsp-es-nbr-metric-out> ] [ <dbase-lsp-es-nbr-ext-metric-out> ] [ <dbase-lsp-auth-type-out> ] [ <dbase-lsp-auth-len-out> ] [ <dbase-lsp-ext-is-name-out> ] [ <dbase-lsp-ext-is-metric-out> ] [ <dbase-lsp-ip-ri-addr-out> ] [ <dbase-lsp-ip-ri-mask-out> ] [ <dbase-lsp-ip-ri-metric-out> ] [ <dbase-lsp-ip-ri-ext-metric-out> ] [ <dbase-lsp-ip-ri-up-down-out> ] [ <dbase-lsp-cap-rtrid> ] [ <dbase-lsp-cap-flags> ] [ { TABLE_process_nlpid <dbase-lsp-prot-support-out> } ] [ <dbase-lsp-ip-addr-out> ] [ <dbase-lsp-ipv6-addr-out> ] [ { TABLE_process_extip <dbase-lsp-extip-addr-out> <dbase-lsp-extip-prefix-len-out> <dbase-lsp-extip-metric-out> <dbase-lsp-extip-up-down-out> [ <dbase-lsp-extip-pfxsid> ] [ <dbase-lsp-extip-pfxsid-flags> ] [ <dbase-lsp-extip-unknown-out> ] } ] [ <dbase-lsp-hname-out> ] [ <dbase-lsp-hname-len-out> ] [ { TABLE_process_extipv6 <dbase-lsp-extipv6-addr-out> <dbase-lsp-extipv6-prefix-len-out> <dbase-lsp-extipv6-metric-out> <dbase-lsp-extipv6-up-down-out> <dbase-lsp-extipv6-ext-origin-out> [ <dbase-lsp-extipv6-pfxsid> ] [ <dbase-lsp-extipv6-pfxsid-flags> ] [ <dbase-lsp-extipv6-unknown-out> ] } ] [ { TABLE_process_subtlv <dbase-lsp-subtlv-name-out> [ <dbase-lsp-extis-admin-group-out> ] [ <dbase-lsp-subtlv-ip-addr-out> ] [ <dbase-lsp-extis-bw-out> ] [ <dbase-lsp-extis-pri1-out> ] [ <dbase-lsp-extis-pri1-val-out> ] [ <dbase-lsp-extis-pri2-out> ] [ <dbase-lsp-extis-pri2-val-out> ] [ <dbase-lsp-extis-te-metric-out> ] [ <dbase-lsp-extis-p2p-adjsid-out> ] [ <dbase-lsp-extis-p2p-adjsid-flags> ] [ <dbase-lsp-extis-p2p-adjsid-weight> ] [ <dbase-lsp-extis-lan-adjsid-out> ] [ <dbase-lsp-extis-lan-adjsid-sysid> ] [ <dbase-lsp-extis-lan-adjsid-flags> ] [ <dbase-lsp-extis-lan-adjsid-weight> ] [ <dbase-lsp-cap-subtlv-sr-start-sid> ] [ <dbase-lsp-cap-subtlv-sr-end-sid> ] [ <dbase-lsp-cap-subtlv-sr-range> ] [ <dbase-lsp-cap-subtlv-sr-flags> ] [ <dbase-lsp-subtlv-len-out> ] [ <dbase-lsp-subtlv-unknown-out> ] } ] [ <dbase-lsp-tlv-len-out> ] [ <dbase-lsp-tlv-unknown-out> ] } ] <dbase-lsp-digest-out> } ] } ] [ { <dbase-lsp-total-out> [ { <dbase-lsp-empty-out> <dbase-lsp-zeroseq-out> } ] } ] } ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Display IS-IS database information

level

(Optional) IS-IS level

lid

(Optional) LSP ID in the form of XXXX.XXXX.XXXX.XX-XX

detail

(Optional) Display detailed IS-IS information

advertise

(Optional) Display advertise tlv lsp-memory information

summary

(Optional) Display summary IS-IS information

zero-sequence

(Optional) LSP with zero sequence number

ip

(Optional) IP attribute filter

ipv6

(Optional) IPv6 attribute filter

prefix

(Optional) Prefix filter

ip-prefix

(Optional) Single exact match IP prefix filter

adjacency

(Optional) Adjacency filter

adj-id

(Optional) Single exact match adjacency filter

router-id

(Optional) Router-id filter

rid

(Optional) single exact match router-id filter

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

dbase-hname-absent-out

(Optional)

TABLE_process_lvl

(Optional)

dbase-level-out

(Optional)

TABLE_process_lsp

(Optional)

dbase-lsp-name-out

(Optional)

dbase-lsp-status-out

(Optional)

dbase-lsp-absent-out

(Optional)

dbase-lsp-seqnum-out

(Optional)

dbase-lsp-cksum-out

(Optional)

dbase-lsp-lifetime-str-out

(Optional)

dbase-lsp-lifetime-out

(Optional)

dbase-att-out

(Optional)

dbase-partition-out

(Optional)

dbase-overload-out

(Optional)

dbase-istype-out

(Optional)

dbase-lsp-instance-out

(Optional)

TABLE_process_tlv

(Optional)

dbase-lsp-tlv-name-out

(Optional)

dbase-lsp-area-addr-out

(Optional)

dbase-lsp-is-nbr-name-out

(Optional)

dbase-lsp-is-nbr-metric-out

(Optional)

dbase-lsp-is-nbr-ext-metric-out

(Optional)

dbase-lsp-es-nbr-name-out

(Optional)

dbase-lsp-es-nbr-metric-out

(Optional)

dbase-lsp-es-nbr-ext-metric-out

(Optional)

dbase-lsp-auth-type-out

(Optional)

dbase-lsp-auth-len-out

(Optional)

dbase-lsp-ext-is-name-out

(Optional)

dbase-lsp-ext-is-metric-out

(Optional)

dbase-lsp-ip-ri-addr-out

(Optional)

dbase-lsp-ip-ri-mask-out

(Optional)

dbase-lsp-ip-ri-metric-out

(Optional)

dbase-lsp-ip-ri-ext-metric-out

(Optional)

dbase-lsp-ip-ri-up-down-out

(Optional)

TABLE_process_nlpid

(Optional)

dbase-lsp-prot-support-out

(Optional)

dbase-lsp-ip-addr-out

(Optional)

dbase-lsp-ipv6-addr-out

(Optional)

TABLE_process_extip

(Optional)

dbase-lsp-extip-addr-out

(Optional)

dbase-lsp-extip-prefix-len-out

(Optional)

dbase-lsp-extip-metric-out

(Optional)

dbase-lsp-extip-up-down-out

(Optional)

dbase-lsp-extip-pfxsid

(Optional)

dbase-lsp-extip-pfxsid-flags

(Optional)

dbase-lsp-extip-unknown-out

(Optional)

dbase-lsp-hname-out

(Optional)

dbase-lsp-hname-len-out

(Optional)

TABLE_process_extipv6

(Optional)

dbase-lsp-extipv6-addr-out

(Optional)

dbase-lsp-extipv6-prefix-len-out

(Optional)

dbase-lsp-extipv6-metric-out

(Optional)

dbase-lsp-extipv6-up-down-out

(Optional)

dbase-lsp-extipv6-ext-origin-out

(Optional)

dbase-lsp-extipv6-pfxsid

(Optional)

dbase-lsp-extipv6-pfxsid-flags

(Optional)

dbase-lsp-extipv6-unknown-out

(Optional)

dbase-lsp-tlv-len-out

(Optional)

dbase-lsp-tlv-unknown-out

(Optional)

TABLE_process_subtlv

(Optional)

dbase-lsp-subtlv-name-out

(Optional)

dbase-lsp-extis-admin-group-out

(Optional)

dbase-lsp-subtlv-ip-addr-out

(Optional)

dbase-lsp-extis-bw-out

(Optional)

dbase-lsp-extis-pri1-out

(Optional)

dbase-lsp-extis-pri1-val-out

(Optional)

dbase-lsp-extis-pri2-out

(Optional)

dbase-lsp-extis-pri2-val-out

(Optional)

dbase-lsp-extis-te-metric-out

(Optional)

dbase-lsp-extis-p2p-adjsid-out

(Optional)

dbase-lsp-extis-p2p-adjsid-flags

(Optional)

dbase-lsp-extis-p2p-adjsid-weight

(Optional)

dbase-lsp-extis-lan-adjsid-out

(Optional)

dbase-lsp-extis-lan-adjsid-sysid

(Optional)

dbase-lsp-extis-lan-adjsid-flags

(Optional)

dbase-lsp-extis-lan-adjsid-weight

(Optional)

dbase-lsp-subtlv-len-out

(Optional)

dbase-lsp-subtlv-unknown-out

(Optional)

dbase-lsp-digest-out

(Optional)

dbase-lsp-total-out

(Optional)

dbase-lsp-empty-out

(Optional)

dbase-lsp-zeroseq-out

(Optional)

dbase-lsp-cap-rtrid

(Optional)

dbase-lsp-cap-flags

(Optional)

dbase-lsp-cap-subtlv-sr-start-sid

(Optional)

dbase-lsp-cap-subtlv-sr-end-sid

(Optional)

dbase-lsp-cap-subtlv-sr-range

(Optional)

dbase-lsp-cap-subtlv-sr-flags

(Optional)

Command Mode

- /exec

show isis distribute-ls

show isis [ <isis-tag> ] distribute-ls { [ system-id <sid> ] | [ lsp-id <lid> ] } [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <vrf-name-out> <vrf-id-out> <lslib-connection-out> <client-type-out> <protocol-instance-out> <nxos-instance-out> <ha-recovery-out> [ <queue-all-out> ] <update-timer-sec-out> <update-timer-msec-out> <update-timer-running-out> [ <update-timer-due-in> ] [ { TABLE_process_lvl <level-out> <level-distributing-out> [ { TABLE_ls_node [ <node-id-out> ] [ <node-name-out> ] [ { TABLE_ls_lsp <lsp-id-out> <lsp-name-out> <lsp-purged-out> [ <node-grpid-out> ] [ <prefix-grpid-out> ] [ <link-grpid-out> ] [ <node-attr-bitfield-out> ] [ <node-flags-out> ] [ <attached-bit-out> ] [ <overloaded-bit-out> ] [ <area-id-out> ] [ <area-length-out> ] [ <name-out> ] [ <ipv4-id-out> ] [ { TABLE_srgb <number-out> <start-out> <size-out> } ] [ <sr-algo-count-out> ] [ { TABLE_sr_algo <algo-out> } ] [ { TABLE_ls_link <nbr-node-out> <local-ip-out> <remote-ip-out> [ <link-attr-bitfield-out> ] [ <metric-out> ] [ <local-ip-attr-out> ] [ <remote-ip-attr-out> ] [ <max-link-bw-out> ] [ <max-resv-bw-out> ] [ { TABLE_unresv_bw <number-out> <bw-out> } ] [ <metric-te-out> ] [ { TABLE_adj_sid <asid-out> <flag-out> <weight-out> } ] } ] [ { TABLE_ls_prefix <prefix-out> <prefix-len-out> [ <prefix-attr-bitfield-out> ] [ <metric-out> ] [ { TABLE_sid <sid-out> <algo-out> <flags-out> } ] } ] } ] } ] } ] } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

distribute-ls

Link-state distribution database

system-id

(Optional) Hostname or System ID

sid

(Optional) Hostname or System ID (in the form of XXXX.XXXX.XXXX)

lsp-id

(Optional) LSP ID in the form of XXXX.XXXX.XXXX.XX-XX

lid

(Optional) LSP ID in the form of XXXX.XXXX.XXXX.XX-XX

brief

(Optional) Short output

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

vrf-name-out

(Optional)

vrf-id-out

(Optional)

lslib-connection-out

(Optional)

client-type-out

(Optional)

protocol-instance-out

(Optional)

nxos-instance-out

(Optional)

ha-recovery-out

(Optional)

queue-all-out

(Optional)

update-timer-sec-out

(Optional)

update-timer-msec-out

(Optional)

update-timer-running-out

(Optional)

update-timer-due-in

(Optional)

TABLE_process_lvl

(Optional)

level-out

(Optional)

level-distributing-out

(Optional)

TABLE_ls_node

(Optional)

node-id-out

(Optional)

node-name-out

(Optional)

TABLE_ls_lsp

(Optional)

lsp-id-out

(Optional)

lsp-name-out

(Optional)

lsp-purged-out

(Optional)

node-grpid-out

(Optional)

prefix-grpid-out

(Optional)

link-grpid-out

(Optional)

node-attr-bitfield-out

(Optional)

node-flags-out

(Optional)

attached-bit-out

(Optional)

overloaded-bit-out

(Optional)

area-id-out

(Optional)

area-length-out

(Optional)

name-out

(Optional)

ipv4-id-out

(Optional)

TABLE_srgb

(Optional)

number-out

(Optional)

start-out

(Optional)

size-out

(Optional)

sr-algo-count-out

(Optional)

TABLE_sr_algo

(Optional)

algo-out

(Optional)

TABLE_ls_link

(Optional)

nbr-node-out

(Optional)

local-ip-out

(Optional)

remote-ip-out

(Optional)

link-attr-bitfield-out

(Optional)

metric-out

(Optional)

local-ip-attr-out

(Optional)

remote-ip-attr-out

(Optional)

max-link-bw-out

(Optional)

max-resv-bw-out

(Optional)

TABLE_unresv_bw

(Optional)

number-out

(Optional)

bw-out

(Optional)

metric-te-out

(Optional)

TABLE_adj_sid

(Optional)

asid-out

(Optional)

flag-out

(Optional)

weight-out

(Optional)

TABLE_ls_prefix

(Optional)

prefix-out

(Optional)

prefix-len-out

(Optional)

prefix-attr-bitfield-out

(Optional)

metric-out

(Optional)

TABLE_sid

(Optional)

sid-out

(Optional)

algo-out

(Optional)

flags-out

(Optional)

Command Mode

- /exec

show isis event-history

show isis [ <isis-tag> ] [ internal ] event-history { errors | msgs | <isis-event-hist-buf-name> | statistics }

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

(Optional) Commands for internal use

event-history

Display IS-IS event history

errors

Error history

msgs

Message history

isis-event-hist-buf-name

Event history buffer

statistics

Show the state and size of the buffer

Command Mode

- /exec

show isis hostname

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] { hostname | hostname-table } [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out> <tag-out> <hname-enabled-out> <hname-detail-out> [ TABLE_hostname <hname-id-out> <hname-level-out> <hname-id-mine-out> <hname-name-out> ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

hostname

Display IS-IS hostname table information

hostname-table

Display IS-IS hostname table information

detail

(Optional) Display detailed IS-IS information

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

tag-out

(Optional)

hname-enabled-out

(Optional)

hname-detail-out

(Optional)

TABLE_hostname

(Optional)

hname-id-out

(Optional)

hname-level-out

(Optional)

hname-id-mine-out

(Optional)

hname-name-out

(Optional)

Command Mode

- /exec

show isis interface

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface [ brief | <interface> ] [ level-1 | level-2 ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> [ { TABLE_interface [ { <intfb-name-out> <intfb-type-out> <intfb-ix-out> <intfb-state-out> <intfb-ready-state-out> <intfb-cid-out> <intfb-ckt-type-out> <intfb-mtu-out> [ { <intf-p2p-metric-lvl-1-out> <intf-p2p-metric-lvl-2-out> <intf-p2p-prio-lvl-1-out> <intf-p2p-prio-lvl-2-out> <intf-p2p-adj-count-lvl-1-out> <intf-p2p-adj-up-count-lvl-1-out> <intf-p2p-adj-count-lvl-2-out> <intf-p2p-adj-up-count-lvl-2-out> } ] [ { <intf-loopback-metric-lvl-1-out> <intf-loopback-metric-lvl-2-out> <intf-loopback-prio-lvl-1-out> <intf-loopback-prio-lvl-2-out> <intf-loopback-adj-count-lvl-1-out> <intf-loopback-adj-up-count-lvl-1-out> <intf-loopback-adj-count-lvl-2-out> <intf-loopback-adj-up-count-lvl-2-out> } ] [ { <intf-bcast-metric-lvl-1-out> <intf-bcast-metric-lvl-2-out> <intf-bcast-prio-lvl-1-out> <intf-bcast-prio-lvl-2-out> <intf-bcast-adj-count-lvl-1-out> <intf-bcast-adj-up-count-lvl-1-out> <intf-bcast-adj-count-lvl-2-out> <intf-bcast-adj-up-count-lvl-2-out> } ] } ] [ { <intf-name-out> <intf-status-out> } ] [ { <intf-state-out> <intf-internal-state-out> [ <intf-cib-disabled-out> ] [ <intf-cid-invalid-out> ] } ] [ { TABLE_auth [ { <intf-auth-info-out> [ <intf-auth-kchain-out> ] <intf-auth-chk-info-out> } ] } ] [ { <intf-ix-out> <intf-cid-out> <intf-ckt-type-out> } ] [ { TABLE_bfd [ <intf-bfd-ipv4-state-out> ] [ <intf-bfd-ipv6-state-out> ] } ] [ <intf-passive-mask-out> ] [ <intf-passive-mask-lvl-out> ] [ <intf-mgrp-set-out> ] [ <intf-mgrp-state-out> ] [ <intf-mgrp-id-out> ] [ <intf-p2p-type-out> ] [ { <intf-p2p-ext-local-cid-out> <intf-p2p-cid-out> <intf-retx-intv-out> <intf-retx-throttle-out> } ] [ <intf-loopback-type-out> ] [ { <intf-lsp-intv-out> <intf-mtu-out> [ <intf-hpad-state-out> ] } ] [ { [ <intf-p2p-pad-ts-out> ] <intf-p2p-adj-count-out> <intf-p2p-adj-up-count-out> <intf-p2p-prio-out> <intf-p2p-hello-intv-out> <intf-p2p-hello-multi-out> <intf-p2p-hello-next-out> [ { TABLE_p2p <intf-p2p-lvl-out> <intf-p2p-adj-lvl-out> <intf-p2p-adj-up-lvl-out> <intf-p2p-metric-lvl-out> <intf-p2p-csnp-lvl-out> <intf-p2p-csnp-nxt-lvl-out> <intf-p2p-lspid-last-lvl-out> } ] } ] [ { <intf-bcast-type-out> [ { TABLE_bcast_pad [ { <intf-bcast-lvl-out> <intf-bcast-pad-ts-out> } ] } ] [ { TABLE_bcast_dis [ { <intf-bcast-lvl-dis-out> <intf-bcast-dis-ts-out> } ] } ] [ { TABLE_bcast_pkt <intf-bcast-lvl-info-out> <intf-bcast-lvl-metric-0-out> <intf-bcast-lvl-metric-2-out> <intf-bcast-lvl-csnp-intv-out> <intf-bcast-lvl-csnp-next-out> <intf-bcast-lvl-iih-intv-out> <intf-bcast-lvl-iih-multi-out> <intf-bcast-lvl-iih-next-out> } ] [ { TABLE_bcast_adj <intf-bcast-lvl-value-out> <intf-bcast-lvl-adj-out> <intf-bcast-lvl-adj-up-out> <intf-bcast-lvl-prio-out> <intf-bcast-lvl-cktid-out> <intf-bcast-lvl-cktid-ts-out> } ] } ] [ { TABLE_loopback <intf-loopback-lvl-out> <intf-loopback-lvl-metric-out> } ] [ <intf-unknown-out> ] } ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

brief

(Optional) Brief display of IS-IS interfaces

interface

Display IS-IS interface information

level-1

(Optional) Display Level-1 interfaces

level-2

(Optional) Display level-2 interfaces

interface

(Optional) IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_interface

(Optional)

intf-status-out

(Optional)

intf-name-out

(Optional)

intf-ix-out

(Optional)

intf-state-out

(Optional)

intf-cid-out

(Optional)

intf-ckt-type-out

(Optional)

intfb-name-out

(Optional)

intfb-type-out

(Optional)

intfb-ix-out

(Optional)

intfb-state-out

(Optional)

intfb-ready-state-out

(Optional)

intfb-cid-out

(Optional)

intfb-ckt-type-out

(Optional)

intf-p2p-metric-lvl-1-out

(Optional)

intf-p2p-metric-lvl-2-out

(Optional)

intf-p2p-prio-lvl-1-out

(Optional)

intf-p2p-prio-lvl-2-out

(Optional)

intf-p2p-adj-count-lvl-1-out

(Optional)

intf-p2p-adj-count-lvl-2-out

(Optional)

intf-p2p-adj-up-count-lvl-1-out

(Optional)

intf-p2p-adj-up-count-lvl-2-out

(Optional)

intf-loopback-metric-lvl-1-out

(Optional)

intf-loopback-metric-lvl-2-out

(Optional)

intf-loopback-prio-lvl-1-out

(Optional)

intf-loopback-prio-lvl-2-out

(Optional)

intf-loopback-adj-count-lvl-1-out

(Optional)

intf-loopback-adj-count-lvl-2-out

(Optional)

intf-loopback-adj-up-count-lvl-1-out

(Optional)

intf-loopback-adj-up-count-lvl-2-out

(Optional)

intf-bcast-metric-lvl-1-out

(Optional)

intf-bcast-metric-lvl-2-out

(Optional)

intf-bcast-prio-lvl-1-out

(Optional)

intf-bcast-prio-lvl-2-out

(Optional)

intf-bcast-adj-count-lvl-1-out

(Optional)

intf-bcast-adj-count-lvl-2-out

(Optional)

intf-bcast-adj-up-count-lvl-1-out

(Optional)

intf-bcast-adj-up-count-lvl-2-out

(Optional)

intf-internal-state-out

(Optional)

intf-cib-disabled-out

(Optional)

intf-cid-invalid-out

(Optional)

TABLE_auth

(Optional)

intf-auth-info-out

(Optional)

intf-auth-kchain-out

(Optional)

intf-auth-chk-info-out

(Optional)

TABLE_bfd

(Optional)

intf-bfd-ipv4-state-out

(Optional)

intf-bfd-ipv6-state-out

(Optional)

intf-passive-mask-out

(Optional)

intf-passive-mask-lvl-out

(Optional)

intf-mgrp-set-out

(Optional)

intf-mgrp-state-out

(Optional)

intf-mgrp-id-out

(Optional)

intf-p2p-type-out

(Optional)

intf-p2p-ext-local-cid-out

(Optional)

intf-p2p-cid-out

(Optional)

intf-retx-intv-out

(Optional)

intf-retx-throttle-out

(Optional)

intf-loopback-type-out

(Optional)

intf-lsp-intv-out

(Optional)

intf-mtu-out

(Optional)

intfb-mtu-out

(Optional)

intf-hpad-state-out

(Optional)

intf-p2p-pad-ts-out

(Optional)

intf-p2p-adj-count-out

(Optional)

intf-p2p-adj-up-count-out

(Optional)

intf-p2p-prio-out

(Optional)

intf-p2p-hello-intv-out

(Optional)

intf-p2p-hello-multi-out

(Optional)

intf-p2p-hello-next-out

(Optional)

TABLE_p2p

(Optional)

intf-p2p-lvl-out

(Optional)

intf-p2p-adj-lvl-out

(Optional)

intf-p2p-adj-up-lvl-out

(Optional)

intf-p2p-metric-lvl-out

(Optional)

intf-p2p-csnp-lvl-out

(Optional)

intf-p2p-csnp-nxt-lvl-out

(Optional)

intf-p2p-lspid-last-lvl-out

(Optional)

intf-bcast-type-out

(Optional)

TABLE_bcast_pad

(Optional)

intf-bcast-lvl-out

(Optional)

intf-bcast-pad-ts-out

(Optional)

TABLE_bcast_dis

(Optional)

intf-bcast-lvl-dis-out

(Optional)

intf-bcast-dis-ts-out

(Optional)

TABLE_bcast_pkt

(Optional)

intf-bcast-lvl-info-out

(Optional)

intf-bcast-lvl-metric-0-out

(Optional)

intf-bcast-lvl-metric-2-out

(Optional)

intf-bcast-lvl-csnp-intv-out

(Optional)

intf-bcast-lvl-csnp-next-out

(Optional)

intf-bcast-lvl-iih-intv-out

(Optional)

intf-bcast-lvl-iih-multi-out

(Optional)

intf-bcast-lvl-iih-next-out

(Optional)

TABLE_bcast_adj

(Optional)

intf-bcast-lvl-value-out

(Optional)

intf-bcast-lvl-adj-out

(Optional)

intf-bcast-lvl-adj-up-out

(Optional)

intf-bcast-lvl-prio-out

(Optional)

intf-bcast-lvl-cktid-out

(Optional)

intf-bcast-lvl-cktid-ts-out

(Optional)

TABLE_loopback

(Optional)

intf-loopback-lvl-out

(Optional)

intf-loopback-lvl-metric-out

(Optional)

intf-unknown-out

(Optional)

Command Mode

- /exec

show isis ipv6 redistribute route

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 redistribute route [ summary | <ipv6-addr> | <ipv6-prefix> [ longer-prefixes [ summary ] ] ] [ direct-mask ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <redist-route-ipv6-vrf> [ <redist-route-ipv6-af-ix> ] [ { TABLE_one_route <redist-route-ipv6-prefix> [ <redist-route-ipv6-mask-len> ] [ <redist-route-ipv6-pib-name> ] [ <redist-route-ipv6-direct-mask> ] [ <redist-route-ipv6-route-type> ] [ { TABLE_redist <redist-route-ipv6-status> <redist-route-ipv6-level> [ <redist-route-ipv6-metric> ] [ <redist-route-ipv6-sum-addr-prefix> ] [ <redist-route-ipv6-sum-addr-mask-len> ] } ] } ] [ <redist-route-ipv6-summary-addr-prefix> ] [ <redist-route-ipv6-summary-addr-mask-len> ] [ <redist-route-ipv6-summary-route-total> ] [ { TABLE_protocol <redist-route-ipv6-summary-pib-name> [ <redist-route-ipv6-summary-prot-route-total> ] } ] [ <redist-route-ipv6-summary-pending-total> ] [ { TABLE_mask_len <redist-route-ipv6-summary-mask-len-ix> [ <redist-route-ipv6-summary-mask-len> ] } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

redistribute

Display IS-IS redistribute information

route

Display ISIS redistribute route

ipv6

Display IS-IS IPv6 information

longer-prefixes

(Optional) Display exact match and more specific routes

summary

(Optional) Display route counts

direct-mask

(Optional) Display routes with direct-mask set

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

redist-route-ipv6-vrf

(Optional)

redist-route-ipv6-af-ix

(Optional)

TABLE_one_route

(Optional)

redist-route-ipv6-prefix

(Optional)

redist-route-ipv6-mask-len

(Optional)

redist-route-ipv6-pib-name

(Optional)

redist-route-ipv6-direct-mask

(Optional)

redist-route-ipv6-route-type

(Optional)

TABLE_redist

(Optional)

redist-route-ipv6-status

(Optional)

redist-route-ipv6-level

(Optional)

redist-route-ipv6-metric

(Optional)

redist-route-ipv6-sum-addr-prefix

(Optional)

redist-route-ipv6-sum-addr-mask-len

(Optional)

redist-route-ipv6-summary-addr-prefix

(Optional)

redist-route-ipv6-summary-addr-mask-len

(Optional)

redist-route-ipv6-summary-route-total

(Optional)

TABLE_protocol

(Optional)

redist-route-ipv6-summary-pib-name

(Optional)

redist-route-ipv6-summary-prot-route-total

(Optional)

redist-route-ipv6-summary-pending-total

(Optional)

TABLE_mask_len

(Optional)

redist-route-ipv6-summary-mask-len-ix

(Optional)

redist-route-ipv6-summary-mask-len

(Optional)

Command Mode

- /exec

show isis ipv6 route-map statistics

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 route-map statistics { { redistribute { static | direct | amt | bgp <as> | { <src-isis> | eigrp | ospfv3 | rip } <tag> } } | { distribute <src-level> into <dst-level> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag [ <process-tag-out> ] [ <route-map-stat-vrf> ] [ { TABLE_process_route_map [ <name> ] [ <action> ] [ <seq> ] [ { TABLE_cmd [ <str> ] [ <compare-count> ] [ <match-count> ] } ] <accept-count> <reject-count> } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ipv6

Display IS-IS IPv6 information

route-map

Display IS-IS route-map information

statistics

Display IS-IS route-map statistics

redistribute

Redistribute information from another routing protocol

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Protocol

src-isis

IS-IS Routing for IPv6

ospfv3

Open Shortest Path First (OSPF) V3

rip

RIP for IPv6 (RIPNG)

tag

Process tag

distribute

Distribute routes between ISIS levels

into

from level-n into level-m

src-level

Route-distribution between levels

dst-level

Route-distribution between levels

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

route-map-stat-vrf

(Optional)

TABLE_process_route_map

(Optional) Routemap table

name

(Optional) Route-map Name

action

(Optional) Route-map action

seq

(Optional) Sequence number of the rule in route-map

TABLE_cmd

(Optional) Route-map command table

str

(Optional) Route-map command

compare-count

(Optional) Number of comparisons

match-count

(Optional) Number of matches

accept-count

(Optional) Total number of packets accepted by the policy

reject-count

(Optional) Total number of pakcets rejected by the policy

Command Mode

- /exec

show isis ipv6 route

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 route [ topology { [ base ] | mt-ipv6 } ] [ summary | detail | private | <ipv6-addr> [ detail | private ] | <ipv6-prefix> [ detail | private | longer-prefixes [ summary | detail | private ] ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <afi-safi-out> [ TABLE_prefix [ <route-prefix-out> <route-mask-len-out> <route-level-out> ] [ <route-summ-discard-addr-out> <route-summ-discard-mask-len-out> ] [ <route-discard-addr-out> <route-discard-mask-len-out> ] [ <route-addr-print-out> <route-mask-len-print-out> <route-direct-print-out> ] [ TABLE_direct_path [ <route-direct-out> <route-direct-via-out> <route-direct-if-name-out> <route-direct-metric-out> <route-direct-level-out> ] [ <route-direct-instance-out> ] ] [ TABLE_best_path [ <route-no-def-prefix-out> ] [ <route-def-prefix-out> ] <route-addr-valid-out> <route-marker-out> <route-ifname-out> <route-metric-out> <route-pref-out> [ <route-instance-out> ] ] [ <route-discard-mask-out> ] [ [ <route-sum-prefix-out> <route-sum-prefix-len-out> ] <route-total-out> <route-paths-total-out> <route-paths-best-out> <route-paths-backup-out> [ TABLE_sum_best_route <route-sum-lvl-out> <route-sum-total-out> [ <route-sum-direct-out> ] [ <route-sum-normal-out> ] [ <route-sum-missing-out> ] ] [ <route-best-pend-num-out> ] <route-bestpaths-out> [ TABLE_sum_best_path <route-path-sum-lvl-out> <route-path-sum-total-out> [ <route-path-sum-direct-out> ] [ <route-path-sum-normal-out> ] ] <route-backuppaths-out> [ TABLE_sum_backup_path <backup-path-sum-lvl-out> <backup-path-sum-total-out> [ <backup-path-sum-direct-out> ] [ <backup-path-sum-normal-out> ] ] <route-bestroutes-per-mask-out> [ TABLE_best_mask <route-best-mask-val-out> <route-best-mask-count-out> ] [ <route-pend-q-count-out> ] ] ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ipv6

Display IS-IS IPv6 information

route

Display IS-IS route information

topology

(Optional) Display routes for a topology

base

(Optional) Display routes for BASE topology

mt-ipv6

(Optional) Display routes for MT-IPV6-UNICAST topology

longer-prefixes

(Optional) Display exact match and more specific routes

summary

(Optional) Display route counts

detail

(Optional) Display detail route information

private

(Optional) Show detail and internal information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

afi-safi-out

(Optional)

TABLE_prefix

(Optional)

route-prefix-out

(Optional)

route-mask-len-out

(Optional)

route-level-out

(Optional)

route-summ-discard-addr-out

(Optional)

route-summ-discard-mask-len-out

(Optional)

route-discard-addr-out

(Optional)

route-discard-mask-len-out

(Optional)

route-addr-print-out

(Optional)

route-mask-len-print-out

(Optional)

route-direct-print-out

(Optional)

TABLE_direct_path

(Optional)

route-direct-out

(Optional)

route-direct-via-out

(Optional)

route-direct-if-name-out

(Optional)

route-direct-metric-out

(Optional)

route-direct-level-out

(Optional)

route-direct-instance-out

(Optional)

TABLE_best_path

(Optional)

route-no-def-prefix-out

(Optional)

route-def-prefix-out

(Optional)

route-addr-valid-out

(Optional)

route-marker-out

(Optional)

route-ifname-out

(Optional)

route-metric-out

(Optional)

route-pref-out

(Optional)

route-instance-out

(Optional)

route-discard-mask-out

(Optional)

route-sum-prefix-out

(Optional)

route-sum-prefix-len-out

(Optional)

route-total-out

(Optional)

route-paths-total-out

(Optional)

route-paths-best-out

(Optional)

route-paths-backup-out

(Optional)

TABLE_sum_best_route

(Optional)

route-sum-lvl-out

(Optional)

route-sum-total-out

(Optional)

route-sum-direct-out

(Optional)

route-sum-normal-out

(Optional)

route-sum-missing-out

(Optional)

route-best-pend-num-out

(Optional)

route-bestpaths-out

(Optional)

TABLE_sum_best_path

(Optional)

route-path-sum-lvl-out

(Optional)

route-path-sum-total-out

(Optional)

route-path-sum-direct-out

(Optional)

route-path-sum-normal-out

(Optional)

route-backuppaths-out

(Optional)

TABLE_sum_backup_path

(Optional)

backup-path-sum-lvl-out

(Optional)

backup-path-sum-total-out

(Optional)

backup-path-sum-direct-out

(Optional)

backup-path-sum-normal-out

(Optional)

route-bestroutes-per-mask-out

(Optional)

TABLE_best_mask

(Optional)

route-best-mask-val-out

(Optional)

route-best-mask-count-out

(Optional)

route-pend-q-count-out

(Optional)

Command Mode

- /exec

show isis ipv6 summary-address

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 summary-address [ <ipv6-addr> | <ipv6-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out> <tag-out> <afi-safi-out> [ <addr-absent-out> ] [ { TABLE_addr <sum-prefix-out> <mask-len-out> <level-out> [ { TABLE_lvl <addr-lvl-out> <addr-num-out> [ <addr-metric-absent-out> ] [ <addr-metric-out> ] [ <addr-route-count-out> ] } ] } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ipv6

Display IS-IS IPv6 information

summary-address

Display IS-IS summary address

longer-prefixes

(Optional) Display exact match and more specific summary address

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

tag-out

(Optional)

afi-safi-out

(Optional)

addr-absent-out

(Optional)

TABLE_addr

(Optional)

sum-prefix-out

(Optional)

mask-len-out

(Optional)

level-out

(Optional)

TABLE_lvl

(Optional)

addr-lvl-out

(Optional)

addr-num-out

(Optional)

addr-metric-absent-out

(Optional)

addr-metric-out

(Optional)

addr-route-count-out

(Optional)

Command Mode

- /exec

show isis lslib

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] lslib [ cache [ nodes | links | prefixes | node <s0> | link <s1> | prefix <s2> | links-of-node <s3> | prefixes-of-node <s4> ] [ detail ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

lslib

LSLIB client information

cache

(Optional) Link-state cache in LSLIB

nodes

(Optional) All Node objects

links

(Optional) All Link objects

prefixes

(Optional) All Prefix objects

node

(Optional) One node object information

s0

(Optional) Node information

link

(Optional) One link object information

s1

(Optional) Link information

prefix

(Optional) One prefix object information

s2

(Optional) Prefix information

links-of-node

(Optional) All links information of a node

s3

(Optional) Node information

prefixes-of-node

(Optional) All prefixes information of a node

s4

(Optional) Node information

detail

(Optional) Detailed info

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show isis lsp free-list

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] { non-pseudonode | pseudonode { <interface> | orphan } } lsp free-list [ summary ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

non-pseudonode

Display IS-IS non-pseudo-node information

pseudonode

Display IS-IS pseudo-node information

interface

IS-IS interface

orphan

Display orphan LSP information

lsp

Display IS-IS LSP information

free-list

Display free-list information

summary

(Optional) Display LSP count per free-list

Command Mode

- /exec

show isis mesh-group

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] mesh-group [ <mesh-id> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out> <tag-out> [ <mesh-id-set-out> ] [ <mesh-id-invalid-out> ] [ <mesh-id-none-out> ] [ { TABLE_meshid <mesh-set-id-out> [ { TABLE_if <mesh-id-intf-name-out> } ] } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

mesh-group

Display IS-IS mesh-groups

mesh-id

(Optional) Display a single mesh-group

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

tag-out

(Optional)

mesh-id-set-out

(Optional)

mesh-id-invalid-out

(Optional)

mesh-id-none-out

(Optional)

TABLE_meshid

(Optional)

mesh-set-id-out

(Optional)

TABLE_if

(Optional)

mesh-id-intf-name-out

(Optional)

Command Mode

- /exec

show isis non tlv overflow-list

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] { non-pseudonode | pseudonode <interface> } tlv overflow-list [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

non-pseudonode

Display IS-IS non-pseudo-node information

pseudonode

Display IS-IS pseudo-node information

interface

IS-IS interface

tlv

Display IS-IS TLV information

overflow-list

Display ISIS TLV overflow-list information

Command Mode

- /exec

show isis redistribute route

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] redistribute route [ summary | <ip-addr> | <ip-prefix> [ longer-prefixes [ summary ] ] ] [ direct-mask ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <redist-route-vrf> [ <redist-route-af-ix> ] [ { TABLE_one_route <redist-route-prefix> [ <redist-route-mask-len> ] [ <redist-route-pib-name> ] [ <redist-route-direct-mask> ] [ <redist-route-route-type> ] [ { TABLE_redist <redist-route-status> <redist-route-level> [ <redist-route-metric> ] [ <redist-route-sum-addr-prefix> ] [ <redist-route-sum-addr-mask-len> ] } ] } ] [ <redist-route-summary-addr-prefix> ] [ <redist-route-summary-addr-mask-len> ] [ <redist-route-summary-route-total> ] [ { TABLE_protocol <redist-route-summary-pib-name> [ <redist-route-summary-prot-route-total> ] } ] [ <redist-route-summary-pending-total> ] [ { TABLE_mask_len <redist-route-summary-mask-len-ix> [ <redist-route-summary-mask-len> ] } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

redistribute

Display IS-IS redistribute information

route

Display ISIS redistribute route

ip

(Optional) Display IS-IS IPv4 information

ip-addr

(Optional) Display single IP redistribute route

ip-prefix

(Optional) Display single exact match IP redistribute route

longer-prefixes

(Optional) Display exact match and more specific routes

summary

(Optional) Display route counts

direct-mask

(Optional) Display routes with direct-mask set

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

redist-route-vrf

(Optional)

redist-route-af-ix

(Optional)

TABLE_one_route

(Optional)

redist-route-prefix

(Optional)

redist-route-mask-len

(Optional)

redist-route-pib-name

(Optional)

redist-route-direct-mask

(Optional)

redist-route-route-type

(Optional)

TABLE_redist

(Optional)

redist-route-status

(Optional)

redist-route-level

(Optional)

redist-route-metric

(Optional)

redist-route-sum-addr-prefix

(Optional)

redist-route-sum-addr-mask-len

(Optional)

redist-route-summary-addr-prefix

(Optional)

redist-route-summary-addr-mask-len

(Optional)

redist-route-summary-route-total

(Optional)

TABLE_protocol

(Optional)

redist-route-summary-pib-name

(Optional)

redist-route-summary-prot-route-total

(Optional)

redist-route-summary-pending-total

(Optional)

TABLE_mask_len

(Optional)

redist-route-summary-mask-len-ix

(Optional)

redist-route-summary-mask-len

(Optional)

Command Mode

- /exec

show isis route-map statistics

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] route-map statistics { { redistribute { static | direct | amt | bgp <as> | { <src-isis> | eigrp | ospf | rip } <tag> } } | { distribute <src-level> into <dst-level> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <route-map-stat-vrf> [ { TABLE_process_route_map [ <name> ] [ <action> ] [ <seq> ] [ { TABLE_cmd [ <str> ] [ <compare-count> ] [ <match-count> ] } ] <accept-count> <reject-count> } ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip

(Optional) Display IS-IS IPv4 information

route-map

Display IS-IS route-map information

statistics

Display IS-IS route-map statistics

redistribute

Redistribute information from another routing protocol

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Protocol

src-isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

rip

RIP for IPv4

tag

Process tag

distribute

Distribute routes between ISIS levels

into

from level-n into level-m

src-level

Route-distribution between levels

dst-level

Route-distribution between levels

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

route-map-stat-vrf

(Optional)

TABLE_process_route_map

(Optional) Routemap table

name

(Optional) Route-map Name

action

(Optional) Route-map action

seq

(Optional) Sequence number of the rule in route-map

TABLE_cmd

(Optional) Route-map command table

str

(Optional) Route-map command

compare-count

(Optional) Number of comparisons

match-count

(Optional) Number of matches

accept-count

(Optional) Total number of packets accepted by the policy

reject-count

(Optional) Total number of pakcets rejected by the policy

Command Mode

- /exec

show isis route

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] route [ summary | detail | private | <ip-addr> [ detail | private ] | <ip-prefix> [ detail | private | longer-prefixes [ summary | detail | private ] ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <afi-safi-out> [ TABLE_prefix [ <route-prefix-out> <route-mask-len-out> <route-level-out> ] [ <route-summ-discard-addr-out> <route-summ-discard-mask-len-out> ] [ <route-discard-addr-out> <route-discard-mask-len-out> ] [ <route-addr-print-out> <route-mask-len-print-out> <route-direct-print-out> ] [ TABLE_direct_path [ <route-direct-out> <route-direct-via-out> <route-direct-if-name-out> <route-direct-metric-out> <route-direct-level-out> ] [ <route-direct-instance-out> ] ] [ TABLE_best_path [ <route-no-def-prefix-out> ] [ <route-def-prefix-out> ] <route-addr-valid-out> <route-marker-out> <route-ifname-out> <route-metric-out> <route-pref-out> [ <route-instance-out> ] ] [ <route-discard-mask-out> ] [ [ <route-sum-prefix-out> <route-sum-prefix-len-out> ] <route-total-out> <route-paths-total-out> <route-paths-best-out> <route-paths-backup-out> [ TABLE_sum_best_route <route-sum-lvl-out> <route-sum-total-out> [ <route-sum-direct-out> ] [ <route-sum-normal-out> ] [ <route-sum-missing-out> ] ] [ <route-best-pend-num-out> ] <route-bestpaths-out> [ TABLE_sum_best_path <route-path-sum-lvl-out> <route-path-sum-total-out> [ <route-path-sum-direct-out> ] [ <route-path-sum-normal-out> ] ] <route-backuppaths-out> [ TABLE_sum_backup_path <backup-path-sum-lvl-out> <backup-path-sum-total-out> [ <backup-path-sum-direct-out> ] [ <backup-path-sum-normal-out> ] ] <route-bestroutes-per-mask-out> [ TABLE_best_mask <route-best-mask-val-out> <route-best-mask-count-out> ] [ <route-pend-q-count-out> ] ] ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip

(Optional) Display IS-IS IPv4 information

route

Display IS-IS route information

ip-addr

(Optional) Display single IP route

ip-prefix

(Optional) Display single exact match IP route

longer-prefixes

(Optional) Display exact match and more specific routes

summary

(Optional) Display route counts

detail

(Optional) Display detail route information

private

(Optional) Show detail and internal information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

afi-safi-out

(Optional)

TABLE_prefix

(Optional)

route-prefix-out

(Optional)

route-mask-len-out

(Optional)

route-level-out

(Optional)

route-summ-discard-addr-out

(Optional)

route-summ-discard-mask-len-out

(Optional)

route-discard-addr-out

(Optional)

route-discard-mask-len-out

(Optional)

route-addr-print-out

(Optional)

route-mask-len-print-out

(Optional)

route-direct-print-out

(Optional)

TABLE_direct_path

(Optional)

route-direct-out

(Optional)

route-direct-via-out

(Optional)

route-direct-if-name-out

(Optional)

route-direct-metric-out

(Optional)

route-direct-level-out

(Optional)

route-direct-instance-out

(Optional)

TABLE_best_path

(Optional)

route-no-def-prefix-out

(Optional)

route-def-prefix-out

(Optional)

route-addr-valid-out

(Optional)

route-marker-out

(Optional)

route-ifname-out

(Optional)

route-metric-out

(Optional)

route-pref-out

(Optional)

route-instance-out

(Optional)

route-discard-mask-out

(Optional)

route-sum-prefix-out

(Optional)

route-sum-prefix-len-out

(Optional)

route-total-out

(Optional)

route-paths-total-out

(Optional)

route-paths-best-out

(Optional)

route-paths-backup-out

(Optional)

TABLE_sum_best_route

(Optional)

route-sum-lvl-out

(Optional)

route-sum-total-out

(Optional)

route-sum-direct-out

(Optional)

route-sum-normal-out

(Optional)

route-sum-missing-out

(Optional)

route-best-pend-num-out

(Optional)

route-bestpaths-out

(Optional)

TABLE_sum_best_path

(Optional)

route-path-sum-lvl-out

(Optional)

route-path-sum-total-out

(Optional)

route-path-sum-direct-out

(Optional)

route-path-sum-normal-out

(Optional)

route-backuppaths-out

(Optional)

TABLE_sum_backup_path

(Optional)

backup-path-sum-lvl-out

(Optional)

backup-path-sum-total-out

(Optional)

backup-path-sum-direct-out

(Optional)

backup-path-sum-normal-out

(Optional)

route-bestroutes-per-mask-out

(Optional)

TABLE_best_mask

(Optional)

route-best-mask-val-out

(Optional)

route-best-mask-count-out

(Optional)

route-pend-q-count-out

(Optional)

Command Mode

- /exec

show isis route is

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] route is [ topology { [ base ] | mt-ipv6 } ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Display IS-IS route information

is

Display IS route

topology

(Optional) Display routes for a topology

base

(Optional) Display routes for BASE topology

mt-ipv6

(Optional) Display routes for MT-IPV6-UNICAST topology

Command Mode

- /exec

show isis rrm

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] rrm <interface> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <rrm-if-name> [ { TABLE_rrm <rrm-level> <rrm-retx-interval> <rrm-retx-throttle-interval> <rrm-retx-queue-length> <rrm-next-retx> <rrm-retx-queue-hwm> <rrm-retx-queue-exceed> <rrm-dbase-hdr> [ <rrm-timestamp> ] [ <rrm-lsp-retx-instance> ] [ <rrm-lsp-db-instance> ] [ <rrm-rrm-set> ] [ <rrm-srm-set> ] } ] } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

rrm

Display IS-IS Retransmit-Routing-Message information

interface

IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

rrm-if-name

(Optional)

TABLE_rrm

(Optional)

rrm-level

(Optional)

rrm-retx-interval

(Optional)

rrm-retx-throttle-interval

(Optional)

rrm-retx-queue-length

(Optional)

rrm-next-retx

(Optional)

rrm-retx-queue-hwm

(Optional)

rrm-retx-queue-exceed

(Optional)

rrm-dbase-hdr

(Optional)

rrm-timestamp

(Optional)

rrm-lsp-retx-instance

(Optional)

rrm-lsp-db-instance

(Optional)

rrm-rrm-set

(Optional)

rrm-srm-set

(Optional)

Command Mode

- /exec

show isis segment-routing local-mapcache

show isis [ <isis-tag> ] segment-routing local-mapcache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

segment-routing

show segment-routing information

local-mapcache

local prefix-sid mappings

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show isis segment-routing mapcache

show isis [ <isis-tag> ] segment-routing mapcache [ level-1 | level-2 ] [ <ipv4-prefix> ] [ sid <sr-sid> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <srmap-v4-state> <srmap-v6-state> [ { TABLE_srmap_level <srmap-level> [ { TABLE_srmap_pfxsid <srmap-pfxsid> <srmap-lsp-id> <srmap-pfxsid-valid> <srmap-pfxsid-flags> <srmap-prefix> } ] } ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

segment-routing

show segment-routing information

mapcache

prefix-sid mappings

level-1

(Optional) show information for level 1 only

level-2

(Optional) show information for level 2 only

ipv4-prefix

(Optional) Display single exact match IP route

sid

(Optional) show information for this SR SID value

sr-sid

(Optional) SR SID value

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

srmap-v4-state

(Optional)

srmap-v6-state

(Optional)

TABLE_srmap_level

(Optional)

srmap-level

(Optional)

TABLE_srmap_pfxsid

(Optional)

srmap-pfxsid

(Optional)

srmap-lsp-id

(Optional)

srmap-pfxsid-valid

(Optional)

srmap-pfxsid-flags

(Optional)

srmap-prefix

(Optional)

Command Mode

- /exec

show isis segment-routing remote-srgb

show isis [ <isis-tag> ] segment-routing remote-srgb [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <sr-v4-state> <sr-v6-state> [ { TABLE_srgb_lsp <srgb-level> <srgb-lspid> <srgb-num-entries> <srgb-flags> [ { TABLE_srgb_label <srgb-start-label> <srgb-range> } ] } ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

segment-routing

show segment-routing information

remote-srgb

remote SR ranges

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

sr-v4-state

(Optional)

sr-v6-state

(Optional)

TABLE_srgb_lsp

(Optional)

srgb-level

(Optional)

srgb-lspid

(Optional)

srgb-num-entries

(Optional)

srgb-flags

(Optional)

TABLE_srgb_label

(Optional)

srgb-start-label

(Optional)

srgb-range

(Optional)

Command Mode

- /exec

show isis segment-routing sids

show isis [ <isis-tag> ] segment-routing sids [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <vrf-name-out> [ { TABLE_sr_sids <sr-sid> [ <sr-prefix> ] [ <sr-local-flag> ] [ <sr-conflict-flag> ] } ] } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

segment-routing

show segment-routing information

sids

sid database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

vrf-name-out

(Optional)

TABLE_sr_sids

(Optional)

sr-sid

(Optional)

sr-prefix

(Optional)

sr-local-flag

(Optional)

sr-conflict-flag

(Optional)

Command Mode

- /exec

show isis spf-adjacency

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] spf-adjacency [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <spf-adjacency-vrf> [ <spf-adjacency-system-name> ] [ <spf-adjacency-refcount> ] [ <spf-adjacency-if-name> ] [ <spf-adjacency-rib-addr> ] [ <spf-adjacency-rib-addr-valid> ] [ <spf-adjacency-rib-ipv6-addr> ] [ <spf-adjacency-rib-ipv6-addr-valid> ] [ <spf-adjacency-spf-addr> ] [ <spf-adjacency-spf-ipv6-addr> ] [ { TABLE_SPFADJLEVEL <spf-adjacency-level> } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

spf-adjacency

Display IS-IS SPF adjacency information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

spf-adjacency-vrf

(Optional)

spf-adjacency-system-name

(Optional)

spf-adjacency-refcount

(Optional)

spf-adjacency-if-name

(Optional)

spf-adjacency-rib-addr

(Optional)

spf-adjacency-rib-addr-valid

(Optional)

spf-adjacency-rib-ipv6-addr

(Optional)

spf-adjacency-rib-ipv6-addr-valid

(Optional)

spf-adjacency-spf-addr

(Optional)

spf-adjacency-spf-ipv6-addr

(Optional)

TABLE_SPFADJLEVEL

(Optional)

spf-adjacency-level

(Optional)

Command Mode

- /exec

show isis spf-log

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] spf-log [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> [ { TABLE_topo <topo-id-out> <spflog-calc-out> <spflog-size-out> <spflog-maxsize-out> [ { TABLE_log_detail <num-out> <ts-out> <date-out> [ { TABLE_lvl_detail <lvld-out> <instance-out> <init-ts-out> <ts-lvl-out> } ] [ <ts-is-out> ] [ <ts-urib-out> ] [ <ts-elapsed-out> ] [ { TABLE_lvl_second <lvls-out> <spf-node-out> <spf-cnt-out> <changed-cnt-out> <spf-reason-out> } ] } ] [ { TABLE_log_brief <ago-time-out> [ { TABLE_lvl <lvl-out> <reason-out> <count-out> } ] [ <elapsed-ts-out> ] } ] } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

spf-log

Display IS-IS SPF information

detail

(Optional) Display detail ISIS SPF information

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_topo

(Optional)

topo-id-out

(Optional)

spflog-calc-out

(Optional)

spflog-size-out

(Optional)

spflog-maxsize-out

(Optional)

TABLE_log_detail

(Optional)

num-out

(Optional)

ts-out

(Optional)

date-out

(Optional)

TABLE_lvl_detail

(Optional)

lvld-out

(Optional)

instance-out

(Optional)

init-ts-out

(Optional)

ts-lvl-out

(Optional)

ts-is-out

(Optional)

ts-urib-out

(Optional)

ts-elapsed-out

(Optional)

TABLE_lvl_second

(Optional)

lvls-out

(Optional)

spf-node-out

(Optional)

spf-cnt-out

(Optional)

changed-cnt-out

(Optional)

spf-reason-out

(Optional)

TABLE_log_brief

(Optional)

ago-time-out

(Optional)

TABLE_lvl

(Optional)

lvl-out

(Optional)

reason-out

(Optional)

count-out

(Optional)

elapsed-ts-out

(Optional)

Command Mode

- /exec

show isis srm

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] srm <interface> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <srm-if-name> [ { TABLE_srm <srm-level> <srm-if-eligible> <srm-if-not-on-srm-list> <srm-lsp-interval> <srm-next-lsp> <srm-dbase-hdr> } ] } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

srm

Display IS-IS Send-Routing-Message information

interface

IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

srm-if-name

(Optional)

TABLE_srm

(Optional)

srm-level

(Optional)

srm-if-eligible

(Optional)

srm-if-not-on-srm-list

(Optional)

srm-lsp-interval

(Optional)

srm-next-lsp

(Optional)

srm-dbase-hdr

(Optional)

Command Mode

- /exec

show isis ssn

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ssn <interface> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <snn-if-name> [ { TABLE_ssn <snn-level> <snn-psnp-eligible> <snn-next-psnp> <snn-dbase_hdr> } ] } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ssn

Display IS-IS Send-Sequence-Number information

interface

IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

snn-if-name

(Optional)

TABLE_ssn

(Optional)

snn-level

(Optional)

snn-psnp-eligible

(Optional)

snn-next-psnp

(Optional)

snn-dbase_hdr

(Optional)

Command Mode

- /exec

show isis statistics

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <stat-if-out> <tag-out> TABLE_vrf [ <vrf-name-out> ] [ <stat-if-name-out> ] [ <stat-spf-calc-out> ] [ <stat-lsp-sourced-out> ] [ <stat-lsp-refresh-out> ] [ <stat-lsp-purge-out> ] <stat-dis-elections-out> ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Display IS-IS protocol statistics

interface

(Optional) IS-IS interface

__readonly__

(Optional)

stat-if-out

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

stat-if-name-out

(Optional)

stat-spf-calc-out

(Optional)

stat-lsp-sourced-out

(Optional)

stat-lsp-refresh-out

(Optional)

stat-lsp-purge-out

(Optional)

stat-dis-elections-out

(Optional)

Command Mode

- /exec

show isis summary-address

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] summary-address [ <ip-addr> | <ip-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out> <tag-out> <afi-safi-out> [ <addr-absent-out> ] [ { TABLE_addr <sum-prefix-out> <mask-len-out> <level-out> [ { TABLE_lvl <addr-lvl-out> <addr-num-out> [ <addr-metric-absent-out> ] [ <addr-metric-out> ] [ <addr-route-count-out> ] } ] } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip

(Optional) Display IS-IS IPv4 information

summary-address

Display IS-IS summary address

ip-addr

(Optional) Display single IP summary address

ip-prefix

(Optional) Display single exact match IP summary address

longer-prefixes

(Optional) Display exact match and more specific summary address

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

tag-out

(Optional)

afi-safi-out

(Optional)

addr-absent-out

(Optional)

TABLE_addr

(Optional)

sum-prefix-out

(Optional)

mask-len-out

(Optional)

level-out

(Optional)

TABLE_lvl

(Optional)

addr-lvl-out

(Optional)

addr-num-out

(Optional)

addr-metric-absent-out

(Optional)

addr-metric-out

(Optional)

addr-route-count-out

(Optional)

Command Mode

- /exec

show isis topology

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] topology [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <topology-vrf> [ { TABLE_LEVEL <topology-level> [ { TABLE_ONE_ROUTE <topology-one-route-node-name> [ <topology-one-route-spf-instance> ] [ <topology-one-route-on-path> ] [ <topology-one-route-mt-id> ] [ { TABLE_ONE_ROUTE_NH <topology-one-route-nh-system-name> [ <topology-one-route-nh-if-name> ] [ <topology-one-route-nh-metric> ] } ] [ { TABLE_ONE_ROUTE_MBEST <topology-one-route-mbest-system-name> [ <topology-one-route-mbest-if-name> ] [ <topology-one-route-mbest-metric> ] } ] } ] [ <topology-default-spf-instance> ] [ { TABLE_NH <topology-nh-system-name> [ <topology-nh-if-name> ] [ <topology-nh-metric> ] } ] [ { TABLE_MBEST <topology-mbest-system-name> [ <topology-mbest-if-name> ] [ <topology-mbest-metric> ] } ] } ] ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

topology

Display IS-IS Topology information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

topology-vrf

(Optional)

TABLE_LEVEL

(Optional)

topology-level

(Optional)

TABLE_ONE_ROUTE

(Optional)

topology-one-route-node-name

(Optional)

topology-one-route-spf-instance

(Optional)

topology-one-route-on-path

(Optional)

topology-one-route-mt-id

(Optional)

TABLE_ONE_ROUTE_NH

(Optional)

topology-one-route-nh-system-name

(Optional)

topology-one-route-nh-if-name

(Optional)

topology-one-route-nh-metric

(Optional)

TABLE_ONE_ROUTE_MBEST

(Optional)

topology-one-route-mbest-system-name

(Optional)

topology-one-route-mbest-if-name

(Optional)

topology-one-route-mbest-metric

(Optional)

topology-default-spf-instance

(Optional)

TABLE_NH

(Optional)

topology-nh-system-name

(Optional)

topology-nh-if-name

(Optional)

topology-nh-metric

(Optional)

TABLE_MBEST

(Optional)

topology-mbest-system-name

(Optional)

topology-mbest-if-name

(Optional)

topology-mbest-metric

(Optional)

Command Mode

- /exec

show isis traffic

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> ] [ mbuf-priority ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <traffic-if-out> [ <traffic-if-name-out> ] <traffic-lan-iih-out> <traffic-lan-iih-rcv-out> <traffic-lan-iih-xmit-out> <traffic-lan-iih-rcv-auth-err-out> <traffic-lan-iih-rcv-err-out> <traffic-p2p-iih-out> <traffic-p2p-iih-rcv-out> <traffic-p2p-iih-xmit-out> <traffic-p2p-iih-rcv-auth-err-out> <traffic-p2p-iih-rcv-err-out> <traffic-csnp-out> <traffic-csnp-rcv-out> <traffic-csnp-xmit-out> <traffic-csnp-rcv-auth-err-out> <traffic-csnp-rcv-err-out> <traffic-psnp-out> <traffic-psnp-rcv-out> <traffic-psnp-xmit-out> <traffic-psnp-rcv-auth-err-out> <traffic-psnp-rcv-err-out> <traffic-lsp-out> <traffic-lsp-rcv-out> <traffic-lsp-flood-out> <traffic-lsp-rcv-auth-err-out> <traffic-lsp-rcv-err-out> <traffic-lsp-rexmit-out> [ <traffic-xmit-err-out> ] [ <traffic-unknown-pdu-rcv-out> ] } } ]

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Display IS-IS traffic information

interface

(Optional) IS-IS interface

mbuf-priority

(Optional) Display mbuf priorities for received PDUs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

traffic-if-out

(Optional)

traffic-if-name-out

(Optional)

traffic-lan-iih-out

(Optional)

traffic-lan-iih-rcv-out

(Optional)

traffic-lan-iih-xmit-out

(Optional)

traffic-lan-iih-rcv-auth-err-out

(Optional)

traffic-lan-iih-rcv-err-out

(Optional)

traffic-p2p-iih-out

(Optional)

traffic-p2p-iih-rcv-out

(Optional)

traffic-p2p-iih-xmit-out

(Optional)

traffic-p2p-iih-rcv-auth-err-out

(Optional)

traffic-p2p-iih-rcv-err-out

(Optional)

traffic-csnp-out

(Optional)

traffic-csnp-rcv-out

(Optional)

traffic-csnp-xmit-out

(Optional)

traffic-csnp-rcv-auth-err-out

(Optional)

traffic-csnp-rcv-err-out

(Optional)

traffic-psnp-out

(Optional)

traffic-psnp-rcv-out

(Optional)

traffic-psnp-xmit-out

(Optional)

traffic-psnp-rcv-auth-err-out

(Optional)

traffic-psnp-rcv-err-out

(Optional)

traffic-lsp-out

(Optional)

traffic-lsp-rcv-out

(Optional)

traffic-lsp-flood-out

(Optional)

traffic-lsp-rcv-auth-err-out

(Optional)

traffic-lsp-rcv-err-out

(Optional)

traffic-lsp-rexmit-out

(Optional)

traffic-xmit-err-out

(Optional)

traffic-unknown-pdu-rcv-out

(Optional)

Command Mode

- /exec

show itd

show itd <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> <peer_status> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ <ace_name> ] [ <ace_seq> ] [ <ace_ip> ] [ <ace_protocol> ] [ <ace_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

show

Show running system information

itd

ITD service

svc-name

ITD service name

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

probe

(Optional) probe

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

peer_status

(Optional) peer status

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) probe type

dg_probe_port

(Optional) probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

vip_dgname

(Optional) vip device group

ace_name

(Optional) ace information

ace_seq

(Optional) ace information

ace_ip

(Optional) ace information

ace_protocol

(Optional) ace information

ace_port

(Optional) ace information

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show itd

show itd [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> <peer_status> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

show

Show running system information

itd

ITD service

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

probe

(Optional) probe

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

peer_status

(Optional) peer status

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) device-group probe type

dg_probe_port

(Optional) device-group probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

vip_dgname

(Optional) vip device group

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show itd session device-group

show itd session device-group [ <name> ] [ __readonly__ <first_entry> [ TABLE_svc <node> ] ]

Syntax Description

show

Show running system information

itd

ITD service

session

ITD service session

device-group

ITD service session device-group

name

(Optional) ITD Service session name

__readonly__

(Optional) Read Only

first_entry

(Optional)

TABLE_svc

(Optional)

node

(Optional) node

Command Mode

- /exec

show itd statistics

show itd { <service_name> | all } [ src { <src-ip> | <src-IPv6> } | dst { <dst-ip> | <dst-IPv6> } ] statistics [ brief ] [ __readonly__ <is_firstentry_node> <is_firstentry_acl> <is_for_ace> [ TABLE_nice <service_name> [ <vip> ] [ <ace_seq> ] [ <ace_ip> ] [ <vip_pkt> ] <dev_grp> <node> <node_pkt> [ <acl> ] [ <acl_pkt> ] <mode> <percentage> ] ]

Syntax Description

show

Show running system information

itd

ITD service

statistics

ITD statistics

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry_node

(Optional)

is_firstentry_acl

(Optional)

is_for_ace

(Optional)

TABLE_nice

(Optional)

service_name

service_name

all

All ITD services

src

(Optional) Statistics for src ip

src-ip

(Optional) Provide statistics for src ip

dst

(Optional) Statistics for dst ip

dst-ip

(Optional) Provide statistics for dst ip

vip

(Optional) service virtual ip

ace_seq

(Optional) service ACE name and sequence number

ace_ip

(Optional) service ACE ip/mask/prefix

vip_pkt

(Optional) virtual ip pkt_count

dev_grp

(Optional) device group

node

(Optional) service node ip

node_pkt

(Optional) node pkt count

acl

(Optional) access list

acl_pkt

(Optional) acl pkt count

mode

(Optional) Redirect mode

percentage

(Optional) Packet percentage

Command Mode

- /exec

show itd vrf

show itd vrf [ <name> ] [ __readonly__ <first_entry> [ TABLE_svc <service_name> <vrf_name> <vrf_id> ] ]

Syntax Description

show

Show running system information

itd

ITD service

vrf

ITD service vrf

name

(Optional) ITD Service VRF name

__readonly__

(Optional) Read Only

first_entry

(Optional)

TABLE_svc

(Optional)

service_name

(Optional) itd service name

vrf_name

(Optional) vrf name

vrf_id

(Optional) vrf id

Command Mode

- /exec

Chapter 11. K Show Commands

- show key chain

- show key chain mode decrypt

- show keystore

- show kim inconsistency

- show kubernetes containers

show key chain

{ show key chain [ <keychain> ] } [ __readonly__ TABLE_keychain <chain_name> { TABLE_key [ <key_id> ] [ <key_string> ] [ <crypto_algo> ] [ <accept_utc_zone> ] [ <accept_start> ] [ <accept_end> ] [ <accept_valid> ] [ <send_utc_zone> ] [ <send_start> ] [ <send_end> ] [ <send_valid> ] } ]

Syntax Description

show

Show running system information

key

Display Key Information

chain

Display Keychain Information

keychain

(Optional) Keychain name

__readonly__

(Optional)

TABLE_keychain

(Optional)

TABLE_key

(Optional)

chain_name

(Optional)

key_id

(Optional)

key_string

(Optional)

crypto_algo

(Optional)

accept_utc_zone

(Optional)

accept_start

(Optional)

accept_end

(Optional)

accept_valid

(Optional)

send_utc_zone

(Optional)

send_start

(Optional)

send_end

(Optional)

send_valid

(Optional)

Command Mode

- /exec

show key chain mode decrypt

{ show key chain [ <keychain> ] mode decrypt } [ __readonly__ TABLE_keychain_decrypt <chain_name> { TABLE_key [ <key_id> ] [ <key_string> ] [ <crypto_algo> ] [ <accept_utc_zone> ] [ <accept_start> ] [ <accept_end> ] [ <accept_valid> ] [ <send_utc_zone> ] [ <send_start> ] [ <send_end> ] [ <send_valid> ] } ]

Syntax Description

show

Show running system information

key

Display Key Information

chain

Display Keychain Information

keychain

(Optional) Keychain name

mode

Mode of display

decrypt

Display Decrypted Keystrings

__readonly__

(Optional)

TABLE_keychain_decrypt

(Optional)

TABLE_key

(Optional)

chain_name

(Optional)

key_id

(Optional)

key_string

(Optional)

crypto_algo

(Optional)

accept_utc_zone

(Optional)

accept_start

(Optional)

accept_end

(Optional)

accept_valid

(Optional)

send_utc_zone

(Optional)

send_start

(Optional)

send_end

(Optional)

send_valid

(Optional)

Command Mode

- /exec

show keystore

show keystore [ __readonly__ { TABLE_sksd_state_entries <index> <handle> } <keystore_type> <keystore_ver> <fw_panics> <fw_resets> <rx_fifo_underruns> <rx_timeouts> <rx_bad_checksums> <rx_bad_fragment_lengths> <keystore_corruption> ]

Syntax Description

keystore

keystore stats

__readonly__

(Optional)

TABLE_sksd_state_entries

(Optional) Displays handles of the keys stored

index

(Optional) Index value

handle

(Optional) Handle Name

keystore_type

(Optional) Type of storage h/w or s/w

keystore_ver

(Optional) Version

fw_panics

(Optional) Number of panics

fw_resets

(Optional) Number of Resets

rx_fifo_underruns

(Optional) Rx FIFO Underruns

rx_timeouts

(Optional) Number of Rx timeouts

rx_bad_checksums

(Optional) Number of Bad Checsums

rx_bad_fragment_lengths

(Optional) Bad fragment lenghts received

keystore_corruption

(Optional) Number of corruptions detected

Command Mode

- /exec

show kim inconsistency

show kim inconsistency

Syntax Description

show

Show running system information

kim

Display KIM information

inconsistency

KIM inconsistency

Command Mode

- /exec

show kubernetes containers

show kubernetes containers [ brief | interface <if_name> ]

Syntax Description

show

Show running system information

kubernetes

Show kubernetes

containers

containers

brief

(Optional) Show brief information

interface

(Optional) Interface name

if_name

(Optional) Physical interface

Command Mode

- /exec

Chapter 12. L Show Commands

- show l2 mroute

- show l2 multicast ftag

- show l2 multicast trees

- show l2 route

- show l2fwder l2rib info

- show l2fwder statistics

- show l2rib clients

- show l2rib producers

- show l2rib registrations

- show l2route evpn ead all

- show l2route evpn ethernet-segment esi

- show l2route evpn fl all

- show l2route evpn fl evi

- show l2route evpn imet all

- show l2route evpn imet evi

- show l2route evpn mac-ip all

- show l2route evpn mac-ip evi

- show l2route evpn mac all

- show l2route evpn mac evi

- show l2route evpn path-list all

- show l2route evpn startup-route all

- show l2route evpn startup-route evi

- show l2route fl topology

- show l2route peerid

- show l2route summary

- show l2route topology

- show l2route topology

- show l2route topology

- show lacp counters

- show lacp interface

- show lacp issu-impact

- show lacp neighbor

- show lacp port-channel

- show lacp system-identifier

- show ldap-search-map

- show ldap-server

- show ldap-server groups

- show ldap-server statistics

- show license

- show license brief

- show license default

- show license feature package mapping

- show license file

- show license host-id

- show license reserved

- show license tech support

- show license usage

- show line

- show line console

- show line console connected

- show line console user-input-string

- show lisp ddt

- show lisp ddt queue

- show lisp ddt referral-cache

- show lisp dynamic-eid

- show lisp elp

- show lisp negative-prefix

- show lisp proxy-itr

- show lisp site

- show lisp site instance-id

- show lisp smr

- show lisp stats-cache

- show lldp all

- show lldp dcbx interface

- show lldp entry

- show lldp interface

- show lldp neighbors

- show lldp neighbors detail

- show lldp neighbors system-detail

- show lldp portid-subtype

- show lldp timers

- show lldp tlv-select

- show lldp traffic

- show lldp traffic interface

- show locator-led status

- show logging

- show logging console

- show logging info

- show logging ip access-list cache

- show logging ip access-list status

- show logging last

- show logging level

- show logging level

- show logging level aaa

- show logging level acllog

- show logging level aclmgr

- show logging level adbm

- show logging level adjmgr

- show logging level amt

- show logging level arp

- show logging level ascii-cfg

- show logging level assoc_mgr

- show logging level backup

- show logging level bfd

- show logging level bgp

- show logging level bloggerd

- show logging level bootvar

- show logging level callhome

- show logging level capability

- show logging level catena

- show logging level cdp

- show logging level cert-enroll

- show logging level cert_enroll

- show logging level cfs

- show logging level clis

- show logging level clk_mgr

- show logging level confcheck

- show logging level copp

- show logging level core

- show logging level cts

- show logging level dhcp_snoop

- show logging level diagnostic device_test

- show logging level diagnostic diagclient

- show logging level diagnostic diagmgr

- show logging level dot1x

- show logging level ecp

- show logging level eigrp

- show logging level eltm

- show logging level epp

- show logging level ethdstats

- show logging level ethpm

- show logging level evb

- show logging level evmc

- show logging level evmed

- show logging level evms

- show logging level fabric forwarding

- show logging level fcoe_mgr

- show logging level feature-mgr

- show logging level fs-daemon

- show logging level gpixm

- show logging level hardware-telemetry

- show logging level hsrp

- show logging level icam

- show logging level im

- show logging level imp

- show logging level interface-vlan

- show logging level ip igmp

- show logging level ip msdp

- show logging level ip sla responder

- show logging level ip sla sender

- show logging level ip sla twamp-server

- show logging level ipconf

- show logging level ipfib

- show logging level ipqos

- show logging level ipv6 icmp

- show logging level iscm

- show logging level iscm

- show logging level isis

- show logging level keystore

- show logging level l2fm

- show logging level l3vm

- show logging level lacp

- show logging level ldap

- show logging level license

- show logging level lim

- show logging level lldp

- show logging level m2rib

- show logging level mfdm

- show logging level mfwd

- show logging level mmode

- show logging level module

- show logging level monitor

- show logging level mpls manager

- show logging level mpls switching

- show logging level mpls traffic-eng

- show logging level mvsh

- show logging level nat

- show logging level nbm

- show logging level netstack

- show logging level nfm

- show logging level ngoam

- show logging level npv

- show logging level ntp

- show logging level nve

- show logging level nxsdk

- show logging level openflow

- show logging level ospf

- show logging level ospfv3

- show logging level pfstat

- show logging level pim

- show logging level pim

- show logging level pixm

- show logging level pktmgr

- show logging level platform

- show logging level plbm

- show logging level plcmgr

- show logging level pltfm_config

- show logging level plugin

- show logging level poap

- show logging level poed

- show logging level port-channel

- show logging level port-profile

- show logging level port-resources

- show logging level port-security

- show logging level port

- show logging level private-vlan

- show logging level ptp

- show logging level radius

- show logging level res_mgr

- show logging level rip

- show logging level routing ipv6 multicast

- show logging level routing multicast

- show logging level rpm

- show logging level sal

- show logging level san-port-channel

- show logging level san-port-channel

- show logging level scheduler

- show logging level security

- show logging level segment-routing

- show logging level session-mgr

- show logging level sflow

- show logging level smartc

- show logging level smm

- show logging level snmpd

- show logging level snmpmib_proc

- show logging level spanning-tree

- show logging level spm

- show logging level stripcl

- show logging level sysmgr

- show logging level tacacs

- show logging level telemetry

- show logging level track

- show logging level tunnel

- show logging level u2rib

- show logging level u6rib

- show logging level udld

- show logging level ufdm

- show logging level urib

- show logging level vdc_mgr

- show logging level virtual-service

- show logging level vlan_mgr

- show logging level vmm

- show logging level vmtracker

- show logging level vpc

- show logging level vrrp-cfg

- show logging level vrrp-eng

- show logging level vrrpv3

- show logging level vsan

- show logging level vshd

- show logging level vtp

- show logging level wwn

- show logging level xbar

- show logging logfile

- show logging logfile duration

- show logging logfile last-index

- show logging logfile start-seqn

- show logging logfile start-time

- show logging loopback

- show logging module

- show logging monitor

- show logging nvram

- show logging onboard

- show logging onboard

- show logging onboard kernel-trace

- show logging origin-id

- show logging pending-diff

- show logging pending

- show logging rate-limit

- show logging server

- show logging session status

- show logging source-interface

- show logging status

- show logging timestamp

- show login on-failure log

- show login on-successful log

show l2 mroute

show { l2 | fabricpath } mroute { [ vdc-omf ] { [ resolved ] } | [ vlan <vlanid> ] { { [ omf ] | [ flood ] | [ source { <srcaddr> | <v6srcaddr> | <macsrcaddr> } ] [ group { <groupaddr> | <v6groupaddr> | <macgroupaddr> } ] } [ resolved ] [ ftag <ftag-id> ] [ hex ] } } [ __readonly__ [ <hex2> ] { TABLE_gr [ <ftag> ] <vlan_id> [ { <v4src> <v4grp> <macgrp> | <v6src> <v6grp> <macsrc> } ] [ <omf> | <flood> ] <rt-uptime> <owners> <num_nh> TABLE_nh { <nh_if> | <nh_sw> } [ <stale> ] [ <exclude> ] [ <svi> ] <flags> <nh-uptime> <owner> <rt_type> | <done> | <start> } ]

Syntax Description

show

Show running system information

l2

Layer2 information

fabricpath

fabricpath information

mroute

Show multicast route database

vdc-omf

(Optional) Display vdc omf route

vlan

(Optional) Show information for a vlan

omf

(Optional) Show catch-all entry consisting of mroute ports

flood

(Optional) Display vlan flood route

ftag

(Optional) Show ftag number

source

(Optional) Show (s, g) source IP address

group

(Optional) Show group address

hex

(Optional) Display switch-ids in hex

vlanid

(Optional) Vlan value

ftag-id

(Optional) ftag id

groupaddr

(Optional) Group address

macgroupaddr

(Optional) MAC Group address

srcaddr

(Optional) Source address

macsrcaddr

(Optional) MAC source address

resolved

(Optional) Resolve switchid nexthops into the underlying interfaces

__readonly__

(Optional) Read Only

hex2

(Optional)

TABLE_gr

(Optional)

vlan_id

(Optional) VLAN

rt-uptime

(Optional) Time route was created

num_nh

(Optional) Number of next-hops

owners

(Optional) Owners

v4src

(Optional) IPv4 Multicast traffic source

v4grp

(Optional) IPv4 Multicast Group address

macsrc

(Optional) MAC Multicast traffic source

macgrp

(Optional) MAC Multicast Group address

ftag

(Optional) ftag id

omf

(Optional) Is OMF route

flood

(Optional) Is flood to vlan route

TABLE_nh

(Optional)

nh_if

(Optional) The next hop interface

nh_sw

(Optional) The next hop switch id

owner

(Optional) Owner

flags

(Optional) flags

nh-uptime

(Optional) Time nexthop was created

rt_type

(Optional) Route type

stale

(Optional) Is stale

exclude

(Optional) exclude from post routing replication

svi

(Optional) SVI interface

done

(Optional) Done displaying route data

start

(Optional) Print header

Command Mode

- /exec

show l2 multicast ftag

show { l2 | fabricpath } multicast ftag [ <ftag-id> ] [ __readonly__ TABLE_topo <id> <topo_config> TABLE_ftag <ftag> <topo_id> <config> ]

Syntax Description

show

Show running system information

l2

Layer2 information

fabricpath

fabricpath information

multicast

Multicast information

ftag

ftag number

ftag-id

(Optional) ftag id

__readonly__

(Optional) Read Only

TABLE_topo

(Optional)

id

(Optional) topo id

topo_config

(Optional) program ftag star route

TABLE_ftag

(Optional)

ftag

(Optional) ftag

topo_id

(Optional) topo id

config

(Optional) ftag config

Command Mode

- /exec

show l2 multicast trees

show { l2 | fabricpath } multicast trees [ topo <topo-id> ] [ ftag <ftag-id> ] [ hex ] [ __readonly__ [ <hex2> ] { TABLE_swid <ftag> <topo_id> <sw_id> <rt-uptime> <owners> <num_nh> TABLE_nh [ <preferred> ] { <nh_if> | <nh_sw> } [ <stale> ] <distance> <nh-uptime> <owner> <flags> <rt_type> | <start> | <done> } ]

Syntax Description

show

Show running system information

l2

Layer2 information

fabricpath

fabricpath information

multicast

Multicast information

trees

Show the broadcast/multicast tree database

topo

(Optional) Show topo instance

ftag

(Optional) Show ftag number

hex

(Optional) Display switch-ids in hex

topo-id

(Optional) topo id

ftag-id

(Optional) ftag id

__readonly__

(Optional) Read Only

hex2

(Optional)

TABLE_swid

(Optional)

sw_id

(Optional) switch id

topo_id

(Optional) topo id

ftag

(Optional) ftag id

rt-uptime

(Optional) Time route was created

num_nh

(Optional) Number of next-hops

owners

(Optional) Owners

TABLE_nh

(Optional)

preferred

(Optional) Is preferred interface

nh_if

(Optional) The next hop interface

nh_sw

(Optional) The next hop switch id

owner

(Optional) Owner

flags

(Optional) flags

rt_type

(Optional) Route type

nh-uptime

(Optional) Time nexthop was created

distance

(Optional) admin distance

stale

(Optional) Is stale

start

(Optional)

done

(Optional)

Command Mode

- /exec

show l2 route

show { l2 | fabricpath } route [ topology { <topo_val> [ switchid <switchid> ] | all } | switchid <switchid> ] [ detail | hex ] + [ __readonly__ <line_marker> <is_hex> { TABLE_route <topo_id> <ftag_value> <swid> <sswid> <num_paths> { TABLE_path <path_str> <admin_distance> <metric> <time> <time_detail> <uuid> } } ]

Syntax Description

show

Show running system information

l2

Layer2 information

fabricpath

fabricpath information

route

Show FabricPath route information

topology

(Optional) topology

topo_val

(Optional) topology value

switchid

(Optional) switchid

switchid

(Optional) switchid value

all

(Optional) all topologies

detail

(Optional) detail

hex

(Optional) display in hex

__readonly__

(Optional) Read Only

line_marker

(Optional) line marker

is_hex

(Optional) print in hex

TABLE_route

(Optional) Route delimiter

topo_id

(Optional) topo-id value

ftag_value

(Optional) ftag value

swid

(Optional) switch-id

sswid

(Optional) sub-switch id

num_paths

(Optional) num of paths

TABLE_path

(Optional) Path delimiter

path_str

(Optional) paths

admin_distance

(Optional) admin distance

metric

(Optional) metric

time

(Optional) time

time_detail

(Optional) time_detail

uuid

(Optional) uuid

Command Mode

- /exec

show l2fwder l2rib info

show l2fwder l2rib info

Syntax Description

show

Show running system information

l2fwder

L2 software forwarding

l2rib

L2RIB

info

stats and info

Command Mode

- /exec

show l2fwder statistics

show l2fwder statistics

Syntax Description

show

Show running system information

l2fwder

Display L2FWDER forwarding information

statistics

Show L2FWDER packet counters

Command Mode

- /exec

show l2rib clients

show l2rib clients [ <client_id> ] [ __readonly__ TABLE_l2rib_clients <client-id> <uuid> <process-suffix> ]

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

clients

L2RIB Clients

client_id

(Optional) Enter Client ID

__readonly__

(Optional)

TABLE_l2rib_clients

(Optional) L2RIB Clients Table

client-id

(Optional) Client ID

uuid

(Optional) Process ID

process-suffix

(Optional) Process Name Suffix

Command Mode

- /exec

show l2rib producers

show l2rib producers [ { topology | mac | mac-ip | ead | pl | imet | flood-list | startup-route | peerid | es } [ static | local | bgp | vxlan | hmm | arp | ofa | lisp ] ] [ detail ] [ __readonly__ TABLE_l2rib_producers <prod-name> <prod-id> <client-id> <obj-type> <admin-dist> <purge-time> <state> [ <prod-flags> ] ]

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

producers

L2RIB Producers

detail

(Optional) Detailed information

topology

(Optional) Filter on Topology

mac

(Optional) Filter on MAC

mac-ip

(Optional) Filter on MAC-IP

ead

(Optional) Filter on Ethernet-AD

pl

(Optional) Filter on Path List

imet

(Optional) Filter on IMET Route

flood-list

(Optional) Filter on Flood List

startup-route

(Optional) Filter on Startup Route

peerid

(Optional) Filter on Peerid

es

(Optional) Filter on ES

static

(Optional) Static

local

(Optional) Local

bgp

(Optional) BGP

vxlan

(Optional) VXLAN

hmm

(Optional) HMM

arp

(Optional) ARP

ofa

(Optional) OFA

lisp

(Optional) lisp

__readonly__

(Optional)

TABLE_l2rib_producers

(Optional) L2RIB Producers Table

prod-name

(Optional) Producer Name

prod-id

(Optional) Producer ID

client-id

(Optional) Client ID

obj-type

(Optional) Object Type

admin-dist

(Optional) Admin Distance

purge-time

(Optional) Purge Time

state

(Optional) State

prod-flags

(Optional) Global Producer Flags

Command Mode

- /exec

show l2rib registrations

show l2rib registrations [ client <client_id> [ <topo_id> { mac | mac-ip | ead | pl | imet | flood-list | arp-signal | startup-route | topo | es } ] ] [ __readonly__ TABLE_l2rib_registrations <client-id> <topo-id> <obj-type> <prod> ]

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

registrations

L2RIB Registrations

client

(Optional) Global Registraion Entries

client_id

(Optional) Enter Client ID

topo_id

(Optional) Enter Topology ID

mac

(Optional) Filter on MAC

mac-ip

(Optional) Filter on MAC-IP

ead

(Optional) Filter on Ethernet-AD

pl

(Optional) Filter on Path List

imet

(Optional) Filter on IMET Route

es

(Optional) Filter on Ethernet Segment ID

flood-list

(Optional) Filter on Flood List

startup-route

(Optional) Filter on Startup Route

arp-signal

(Optional) Filter on ARP Signal

topo

(Optional) Filter on Topo Subtype

__readonly__

(Optional)

TABLE_l2rib_registrations

(Optional) L2RIB Registrations Table

client-id

(Optional) Client ID

topo-id

(Optional) Topology ID

obj-type

(Optional) Object Type

prod

(Optional) Producer

Command Mode

- /exec

show l2route evpn ead all

show l2route evpn ead all [ detail ] [ __readonly__ TABLE_l2route_evpn_ead_all <topo-id> <prod> <esi> <client-nfn> <num_pls> [ { <next-hop> } ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

ead

EAD

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_evpn_ead_all

(Optional) L2RIB EVPN EAD All Table

topo-id

(Optional) Topology ID

prod

(Optional) Producer

esi

(Optional) ESI

client-nfn

(Optional) Client Notification Bitmap

num_pls

(Optional) Number of Path lists

next-hop

(Optional) Next Hop

Command Mode

- /exec

show l2route evpn ethernet-segment esi

show l2route evpn ethernet-segment { esi <esi-id> | all } [ bgp | vxlan ] [ detail ] [ __readonly__ TABLE_l2route_es <ethernet-segment> <originating-rtr> <prod-name> <int-ifhdl> <client-nfn> ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

ethernet-segment

Ethernet Segment ID

esi

ESI Value

esi-id

ESI ID

all

Display all entries without filtering

bgp

(Optional) Filter on BGP producer

vxlan

(Optional) Filter on VXLAN producer

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_es

(Optional) L2RIB ES Table

ethernet-segment

(Optional) ESI

originating-rtr

(Optional) Originating Router

prod-name

(Optional) Producer Name

int-ifhdl

(Optional) Interface Handle

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn fl all

show l2route evpn fl all [ detail ] [ __readonly__ TABLE_l2route_fl_all <topo-id> <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

fl

Flood List

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl_all

(Optional) L2RIB Flood List All Table

topo-id

(Optional) Topology ID

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn fl evi

show l2route evpn fl evi <vpn-id> [ detail ] [ __readonly__ TABLE_l2route_fl <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

fl

Flood List

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl

(Optional) L2RIB Flood List Table

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn imet all

show l2route evpn imet all [ detail ] [ __readonly__ TABLE_l2route_imet_all <topo-id> <vni> <prod-type> <ip-addr> [ <eth-tag-id> ] [ <pmsi-flags> ] [ <flags> ] [ <type> ] [ <vni-label> ] [ <tunnel-id> ] [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

imet

IMET Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_imet_all

(Optional) L2RIB IMET All Table

topo-id

(Optional) Topology ID

vni

(Optional) VNI

prod-type

(Optional) Producer Type

ip-addr

(Optional) IP Address

eth-tag-id

(Optional) Ethernet Tag ID

pmsi-flags

(Optional) PMSI Flags

flags

(Optional) Flags

type

(Optional) Type

vni-label

(Optional) VNI Label

tunnel-id

(Optional) Tunnel ID

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn imet evi

show l2route evpn imet evi <vpn-id> [ bgp | vxlan ] [ detail ] [ __readonly__ TABLE_l2route_imet <vni> <prod-type> <ip-addr> [ <eth-tag-id> ] [ <pmsi-flags> ] [ <flags> ] [ <type> ] [ <vni-label> ] [ <tunnel-id> ] [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

imet

IMET Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

bgp

(Optional) Filter on BGP producer (remote imet routes)

vxlan

(Optional) Filter on VXLAN producer (local imet routes)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_imet

(Optional) L2RIB IMET Table

vni

(Optional) VNI

prod-type

(Optional) Producer Type

ip-addr

(Optional) IP Address

eth-tag-id

(Optional) Ethernet Tag ID

pmsi-flags

(Optional) PMSI Flags

flags

(Optional) Flags

type

(Optional) Type

vni-label

(Optional) VNI Label

tunnel-id

(Optional) Tunnel ID

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn mac-ip all

show l2route evpn mac-ip all [ detail ] [ __readonly__ TABLE_l2route_mac_ip_all <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac-ip

MAC-IP Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_all

(Optional) L2RIB Mac-IP All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

host-ip

(Optional) Host IP

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

l3-info

(Optional) L3 Information

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

- /exec

show l2route evpn mac-ip evi

show l2route evpn mac-ip evi <vpn-id> [ arp | bgp | hmm ] [ mac <mac_addr> ] [ host-ip { <ipv4_host> | <ipv6_host> } ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ detail ] [ __readonly__ TABLE_l2route_mac_ip_evi <topo-id> <mac-addr> <prod-type> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac-ip

MAC-IP Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

arp

(Optional) Filter on ARP producer

bgp

(Optional) Filter on BGP producer

hmm

(Optional) Filter on HMM producer

mac

(Optional) Filter on MAC address

mac_addr

(Optional) 48-bit MAC address value

host-ip

(Optional) Filter on Host IP address

ipv4_host

(Optional) IPv4 address

next-hop

(Optional) Filter on Next-Hop IP or Interface Name

ipv4_addr

(Optional) IPv4 address of Next Hop

if-hdl

(Optional) Interface index of Next Hop

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_evi

(Optional) L2RIB Mac-IP Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

host-ip

(Optional) Host IP

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

l3-info

(Optional) L3 Information

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

Command Mode

- /exec

show l2route evpn mac all

show l2route evpn mac all [ detail ] [ __readonly__ TABLE_l2route_mac_all <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac

MAC Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_all

(Optional) L2RIB Mac All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop 1

res-pl-next-hop2

(Optional) Resultant PL Next hop 2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

Command Mode

- /exec

show l2route evpn mac evi

show l2route evpn mac evi <vpn-id> [ static | local | bgp | vxlan | lisp ] [ mac <mac_addr> ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ esi <esi-id> ] [ detail ] [ __readonly__ TABLE_l2route_mac_evi <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac

MAC Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

static

(Optional) Filter on Static producer

local

(Optional) Filter on Local producer

bgp

(Optional) Filter on BGP producer

vxlan

(Optional) Filter on VXLAN producer

lisp

(Optional) Filter on LISP producer

mac

(Optional) Filter on MAC address

esi

(Optional) Filter on ESI value

mac_addr

(Optional) Enter 48-bit MAC address value

next-hop

(Optional) Filter on Next-Hop IP or Interface Name

ipv4_addr

(Optional) IPv4 address of Next Hop

if-hdl

(Optional) Interface index of Next Hop

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_evi

(Optional) L2RIB Mac EVI Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop 1

res-pl-next-hop2

(Optional) Resultant PL Next hop 2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

- /exec

show l2route evpn path-list all

show l2route evpn path-list { all | esi <esi-id> } [ detail ] [ __readonly__ TABLE_l2route_evpn_pathlist_all <topo-id> <prod> <esi> [ <ecmp_label> ] [ <flags> ] [ <client_ctx> ] <mac-cnt> <client-nfn> [ { <cp-next-hop> } ] [ { <res-next-hop> } ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

path-list

Path-List

all

Display all routes without filtering

esi

ESI Value

esi-id

ESI ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_evpn_pathlist_all

(Optional) L2RIB EVPN Pathlist all Table

topo-id

(Optional) Topology ID

prod

(Optional) Producer

esi

(Optional) ESI

ecmp_label

(Optional) ECMP label

flags

(Optional) Flags

client_ctx

(Optional) Client context

mac-cnt

(Optional) Mac count

client-nfn

(Optional) Client Notification Bitmap

cp-next-hop

(Optional) Control plane Next hops

res-next-hop

(Optional) Resultant Next hops

Command Mode

- /exec

show l2route evpn startup-route all

show l2route evpn startup-route all [ detail ] [ __readonly__ TABLE_l2route_startup_route_all <topo-id> <src-group> <del-src-group> [ <src-lpbk-ifhdl> ] [ <nve-ifhdl> ] [ <flags> ] [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

startup-route

Startup Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_startup_route_all

(Optional) L2RIB Startup-Route All Table

topo-id

(Optional) Topology ID

src-group

(Optional) Source Group

del-src-group

(Optional) Delivery Source Group

src-lpbk-ifhdl

(Optional) Source Loopback Interface Handle

nve-ifhdl

(Optional) NVE Interface Handle

flags

(Optional) Flags

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn startup-route evi

show l2route evpn startup-route evi <vpn-id> [ detail ] [ __readonly__ TABLE_l2route_startup_route <src-group> <del-src-group> [ <src-lpbk-ifhdl> ] [ <nve-ifhdl> ] [ <flags> ] [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

startup-route

Startup Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_startup_route

(Optional) L2RIB Startup-Route Table

src-group

(Optional) Source Group

del-src-group

(Optional) Delivery Source Group

src-lpbk-ifhdl

(Optional) Source Loopback Interface Handle

nve-ifhdl

(Optional) NVE Interface Handle

flags

(Optional) Flags

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route fl topology

show l2route fl { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_fl [ <topo-id> ] <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

fl

Flood List

all

Display all routes without filtering

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl

(Optional) L2RIB Flood List Table

topo-id

(Optional) Topology ID

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route peerid

show l2route peerid [ __readonly__ TABLE_l2route_peerid <if-hdl> <ip-addr> <peer-id> <if-idx> <num-macs> <num-nhs> ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

peerid

Display Peer ID DB

__readonly__

(Optional)

TABLE_l2route_peerid

(Optional) L2RIB Peer-ID Table

if-hdl

(Optional) Interface Handle

ip-addr

(Optional) IP Address

if-idx

(Optional) Peer Interface Index

peer-id

(Optional) Peer-ID

num-macs

(Optional) Number of Macs

num-nhs

(Optional) Number of NHs

Command Mode

- /exec

show l2route summary

show l2route summary [ __readonly__ { <total_memory> <numof_converged_tables> [ { TABLE_l2route_summary <table_name> { TABLE_producer <producer_name> <id> <objects> <memory> } <total><total_obj><total_mem> } ] } ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

summary

Summary

__readonly__

(Optional) Read only

total_memory

(Optional) Total memory

numof_converged_tables

(Optional) Number of converged tables

TABLE_l2route_summary

(Optional) L2route summary table

table_name

(Optional) Table name

TABLE_producer

(Optional) Producer table

producer_name

(Optional) Producer name

id

(Optional) id

objects

(Optional) objects

memory

(Optional) Memory

Command Mode

- /exec

show l2route topology

show l2route topology [ <topo_id> ] [ detail ] [ __readonly__ TABLE_l2route_topology <topo-id> <topo-name> <topo-type> [ <vni> ] [ <encap-type> ] [ <iod> ] [ <if-hdl> ] [ <vtep-ip> ] [ <emulated-ip> ] [ <emulated-ro-ip> ] [ <tx-id> ] [ <rcvd-flag> ] [ <rmac> ] [ <vrf-id> ] [ <vmac> ] [ <vmac-ro> ] [ <flags> ] [ <sub-flags> ] [ <prev-flags> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

topology

Display topology IDs

topo_id

(Optional) Enter Topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_topology

(Optional) L2RIB Topology Table

topo-id

(Optional) Topology ID

topo-name

(Optional) Topology Name

topo-type

(Optional) Topology Type

vni

(Optional) VNI

encap-type

(Optional) Encap Type

iod

(Optional) IOD

if-hdl

(Optional) Interface Handle

vtep-ip

(Optional) VTEP IP Address

emulated-ip

(Optional) Emulated VTEP IP Address

emulated-ro-ip

(Optional) Emulated RO VTEP IP Address

tx-id

(Optional) Transaction ID for Topology Ack

rcvd-flag

(Optional) Flag to Indicate Topology Ack

rmac

(Optional) Local Router MAC (For L3 VNIs)

vrf-id

(Optional) VRF ID (For L3 VNIs)

vmac

(Optional) Local Virtual MAC (For L3 VNIs)

vmac-ro

(Optional) Local Virtual MAC Re-Orig(For Multi-site)

flags

(Optional) Flags

sub-flags

(Optional) Sub Flags

prev-flags

(Optional) Previous Flags

Command Mode

- /exec

show l2route topology

show l2route { mac | openflow mac | dataplane mac [ local | remote ] } { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_mac <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

dataplane

dataplane

openflow

openflow

mac

MAC Route

all

Display all routes without filtering

local

(Optional) dataplane learnt local routes

remote

(Optional) dataplane learnt remote routes

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac

(Optional) L2RIB Mac All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop1

res-pl-next-hop2

(Optional) Resultant PL Next hop2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

- /exec

show l2route topology

show l2route { mac-ip | openflow mac-ip } { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_mac_ip_openflow <topo-id> <mac-addr> <prod-type> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

mac-ip

MAC-IP Route

all

Display all routes without filtering

openflow

openflow

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_openflow

(Optional) L2RIB Mac-IP Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

host-ip

(Optional) Host IP

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

seq-num

(Optional) Sequence Number

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

l3-info

(Optional) L3 Information

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

Command Mode

- /exec

show lacp counters

show lacp counters [ interface <if0> ] [ __readonly__ TABLE_interface <interface> TABLE_member <port> <pdus-sent> <pdus-rcvd> <marker-rcvd> <marker-resp-sent> <pkt-errors> [ <illegal-rcvd> ] [ <unknown-rcvd> ] ]

Syntax Description

show

Show running system information

lacp

LACP protocol

counters

LACP counters

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

TABLE_member

(Optional) Member port info

port

(Optional) Member port

pdus-sent

(Optional) Number of PDUs sent

pdus-rcvd

(Optional) Number of PDUs received

marker-rcvd

(Optional) Number of Marker PDUs received

marker-resp-sent

(Optional) Number of Marker response PDUs sent

pkt-errors

(Optional) Number of packet errors

illegal-rcvd

(Optional) Number of illegal packets received

unknown-rcvd

(Optional) Number of unknown packets received

Command Mode

- /exec

show lacp interface

show lacp interface [ <if0> ] [ __readonly__ { TABLE_lacp_intf <interface> <operational-state> <channel-group> <port-channel> <pdus-sent> <pdus-rcvd> <marker-sent> <marker-rcvd> <marker-resp-sent> <marker-resp-rcvd> <unknown-rcvd> <illegal-rcvd> <lag-id> <active-time> { localport <local-interface> <local-mac-address> <local-system-priority> <local-port-priority> <local-port-num> <local-op-key> <local-activity> <local-timeout> <local-sync> <local-collecting> <local-distributing> <partner-info-timeout> <local-admin-state> <local-oper-state> } { partnerport <partner-interface> <partner-mac-address> <partner-system-priority> <partner-port-priority> <partner-port-num> <partner-op-key> <partner-activity> <partner-timeout> <partner-sync> <partner-collecting> <partner-distributing> <partner-admin-state> <partner-oper-state> } <agg-or-indiv> } ]

Syntax Description

show

Show running system information

lacp

LACP protocol

interface

Specify a interface

if0

(Optional)

__readonly__

(Optional)

TABLE_lacp_intf

(Optional) Table of LACP interfaces

interface

(Optional) Interface ID

channel-group

(Optional) Channel Group

port-channel

(Optional) Port Channel

lag-id

(Optional) LAG Id

active-time

(Optional) active-time

operational-state

(Optional) Operational State

agg-or-indiv

(Optional) Aggregate or individual port

pdus-rcvd

(Optional) PDUs received

pdus-sent

(Optional) PDUs sent

marker-rcvd

(Optional) Markers received

marker-sent

(Optional) Markers sent

marker-resp-rcvd

(Optional) Marker response received

marker-resp-sent

(Optional) Marker response sent

unknown-rcvd

(Optional) Unknown pdus received

illegal-rcvd

(Optional) Illegal pdus received

localport

(Optional) Local port information

local-interface

(Optional) Interface

local-mac-address

(Optional) MAC Address

local-system-priority

(Optional) System Priority

local-port-priority

(Optional) Port Priority

local-port-num

(Optional) Port Number

local-op-key

(Optional) Operational Key

local-admin-state

(Optional) Local Admin State

local-oper-state

(Optional) Local Oper State

local-activity

(Optional) Mode

local-timeout

(Optional) Timeout

local-sync

(Optional) Synchronization

local-distributing

(Optional) Distributing

local-collecting

(Optional) Collecting

partner-info-timeout

(Optional) Partner information refresh timeout

partnerport

(Optional) Partner port information

partner-interface

(Optional) Partner Interface

partner-mac-address

(Optional) Partner MAC Address

partner-system-priority

(Optional) Partner System Priority

partner-port-priority

(Optional) Partner Port Priority

partner-port-num

(Optional) Partner Port Number

partner-op-key

(Optional) Operational Key

partner-admin-state

(Optional) Partner Admin State

partner-oper-state

(Optional) Partner Oper State

partner-activity

(Optional) Mode

partner-timeout

(Optional) Timeout

partner-sync

(Optional) Synchronization

partner-distributing

(Optional) Distributing

partner-collecting

(Optional) Collecting

Command Mode

- /exec

show lacp issu-impact

show lacp issu-impact [ __readonly__ TABLE_interface <interface> [ <failed_interface> ] [ <intf_issu_ready> ] ]

Syntax Description

show

Show running system information

lacp

Show LACP information

issu-impact

Check for ISSU readiness

__readonly__

(Optional)

TABLE_interface

(Optional) Port-channel issu-impact member list

interface

(Optional) Port-channel Member

failed_interface

(Optional) ISSU failed interface

intf_issu_ready

(Optional) interfaces ready for issu

Command Mode

- /exec

show lacp neighbor

show lacp neighbor [ interface <if0> ] [ __readonly__ TABLE_interface <interface> TABLE_member <port> <partner-system-id> <partner-port-num> <partner-age> <partner-flags> <partner-port-priority> <partner-oper-key> <partner-port-state> ]

Syntax Description

show

Show running system information

lacp

LACP protocol

neighbor

LACP interface neighbor

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

TABLE_member

(Optional) Member port info

port

(Optional) Member port

partner-system-id

(Optional) Partner System ID

partner-port-num

(Optional) Partner Port Number

partner-age

(Optional) Partner age

partner-flags

(Optional) Partner flags

partner-port-priority

(Optional) Partner Port Priority

partner-oper-key

(Optional) Partner oper key

partner-port-state

(Optional) Partner port state

Command Mode

- /exec

show lacp port-channel

show lacp port-channel [ interface <if0> ] [ __readonly__ TABLE_interface <interface> <aggr-mac-address> <local-system-priority> <local-system-id> <local-admin-key> <local-oper-key> <partner-system-priority> <partner-system-id> <partner-oper-key> <max-delay> <agg-or-indiv> { <port-list> } + ]

Syntax Description

show

Show running system information

lacp

LACP protocol

port-channel

LACP port-channels

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

aggr-mac-address

(Optional) Mac Address of aggregator

local-system-priority

(Optional) Local System Priority

local-system-id

(Optional) Local System-Id

local-admin-key

(Optional) Local admin key

local-oper-key

(Optional) Local oper key

partner-system-priority

(Optional) Partner System Priority

partner-system-id

(Optional) Partner System-Id

partner-oper-key

(Optional) Partner oper key

max-delay

(Optional) Maximum delay between aggregator and mac-client

agg-or-indiv

(Optional) Aggregate or individual port

port-list

(Optional) List of port names for member ports

Command Mode

- /exec

show lacp system-identifier

show lacp system-identifier [ __readonly__ <system-priority> <system-mac> ]

Syntax Description

show

Show running system information

lacp

LACP protocol

system-identifier

Show system-identifier information

__readonly__

(Optional)

system-priority

(Optional) System priority

system-mac

(Optional) System mac address

Command Mode

- /exec

show ldap-search-map

show ldap-search-map [ __readonly__ { number_of_search_maps <search_map_count> } [ TABLE_ldap_searchmaps [ <map_name> <map_baseDN> <map_attr> <map_filter> ] ] ]

Syntax Description

__readonly__

(Optional)

number_of_search_maps

(Optional) Total number of search maps configured

search_map_count

(Optional) Ldap Search map count

TABLE_ldap_searchmaps

(Optional) Ldap search map configuration

map_name

(Optional) Search map name

map_baseDN

(Optional) Ldap base DN

map_attr

(Optional) Search map attribute

map_filter

(Optional) Ldap Search filter

show

Show running system information

ldap-search-map

Show LDAP configuration information

Command Mode

- /exec

show ldap-server

show ldap-server [ __readonly__ { global_timeout <g_timeout> } { global_port <g_port> } { global_deadtime <g_deadtime> } { total_number_of_server <g_servers_count> } { TABLE_ldap_hosts <ldap_host> <h_idletime> <h_test_user> <h_test_passwd> [ <h_test_dn> ] <h_timeout> <h_port> <h_rootDN> <h_ssl_enable> } ]

Syntax Description

__readonly__

(Optional)

TABLE_ldap_hosts

(Optional) Ldap host configuration

global_timeout

(Optional) Ldap host global timeout

global_port

(Optional) Ldap host global port

global_deadtime

(Optional) Ldap host global deadtime

total_number_of_server

(Optional) Total number of ldap hosts configured

g_servers_count

(Optional) Total number of ldap hosts configured

g_timeout

(Optional) global timeout value

g_port

(Optional) Global ldap port

g_deadtime

(Optional) Global deadtime value

ldap_host

(Optional) Ldap host

h_idletime

(Optional) Ldap host idletime

h_test_user

(Optional) Ldap host testuser

h_test_passwd

(Optional) Ldap host password

h_test_dn

(Optional) Ldap testuser dn

h_timeout

(Optional) Ldap host timeout

h_port

(Optional) Ldap host port

h_rootDN

(Optional) Ldap host RootDN

h_ssl_enable

(Optional) Ldap host ssl configuration

show

Show running system information

ldap-server

Show LDAP configuration information

Command Mode

- /exec

show ldap-server groups

show ldap-server groups [ __readonly__ { total_number_of_groups <total_groups_count> } { TABLE_groups <g_name> <g_vrf> <g_mode> <is_bind_and_search> <g_append_with_baseDN> <g_compare_or_bind> <g_cmp_passwd_attr> [ <user-server-group> ] [ <Cert-DN-match> ] <auth_mechanism> [ TABLE_g_servers <g_server> <g_port> <g_timeout> ] [ <g_search_map> ] } ]

Syntax Description

show

Show running system information

ldap-server

Show LDAP configuration information

groups

Show LDAP server group configuration information

__readonly__

(Optional)

total_number_of_groups

(Optional) Total number of Ldap groups configured

total_groups_count

(Optional) Ldap group count

TABLE_groups

(Optional) LDAP Group information

g_name

(Optional) Ldap group name

g_vrf

(Optional) LDAP group vrf

g_mode

(Optional) LDAP group mode

is_bind_and_search

(Optional) Ldap Authentication bind or search

g_append_with_baseDN

(Optional) LDAP baseDN append information

g_compare_or_bind

(Optional) LDAP bind or compare

g_cmp_passwd_attr

(Optional) LDAP compare password attribute

user-server-group

(Optional) Ldap server group validation

Cert-DN-match

(Optional) Ldap group CERT-DN match

auth_mechanism

(Optional) Ldap server group authentication mechanism

TABLE_g_servers

(Optional) LDAP group server information

g_server

(Optional) LDAP group host

g_port

(Optional) LDAP group host port

g_timeout

(Optional) LDAP griup host timeout

g_search_map

(Optional) LDAP group search map

Command Mode

- /exec

show ldap-server statistics

show ldap-server statistics <host0> [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } [ acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> ] } ]

Syntax Description

show

Show running system information

ldap-server

Show LDAP configuration information

statistics

Show LDAP statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

show license

show license [ __readonly__ { [ <lic_file_name> <lic_file_contents> ] + } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

__readonly__

(Optional) Read only

lic_file_name

(Optional) Name of the license file

lic_file_contents

(Optional) License file contents

Command Mode

- /exec

show license brief

show license brief [ __readonly__ { [ <lic_file_name> ] + } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

brief

Show a list of license files

__readonly__

(Optional) Read only

lic_file_name

(Optional) Name of the license file

Command Mode

- /exec

show license default

show license default [ __readonly__ { TABLE_lic_default <feature_name> <def_lic_count> } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

default

Show services using default license

__readonly__

(Optional) Read Only

feature_name

(Optional) Licensed Feature Name

TABLE_lic_default

(Optional)

def_lic_count

(Optional) Default License Count

Command Mode

- /exec

show license feature package mapping

show license feature package mapping [ __readonly__ { [ <app_name> [ <lc_type> <flags> <pkg_name> <version> ] + ] + | [ <null_map> ] } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

feature

Show application name

package

Show license package name

mapping

Show mapping between application and package name

__readonly__

(Optional) Read only

app_name

(Optional) Name of the application

lc_type

(Optional) Lincard type

flags

(Optional) Are all licenses required

pkg_name

(Optional) License Package Name

version

(Optional) License version

null_map

(Optional) No mappings defined

Command Mode

- /exec

show license file

show license file <license-file> [ __readonly__ { [ <lic_file_contents> ] + } ]

Syntax Description

show

Show running system information

license

Show the contents of all the license files

file

Show contents of a license file

license-file

Show the contents of license file __nil__ Please install a license before using this command.

__readonly__

(Optional) Read only

lic_file_contents

(Optional) License file contents

Command Mode

- /exec

show license host-id

show license host-id [ __readonly__ { <host_id> } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

host-id

Show unique id for this host for licensing

__readonly__

(Optional) Read only

host_id

(Optional) unique id for this host for licensing

Command Mode

- /exec

show license reserved

show license reserved

Syntax Description

show

show commands

license

Display licensing information

reserved

Display reserved licenses information

Command Mode

- /exec

show license tech support

show license tech support

Syntax Description

show

show commands

license

Display licensing information

tech

Gather information for troubleshooting

support

Gather information for troubleshooting

Command Mode

- /exec

show license usage

show license usage [ { detail | <license-feature> } ] [ __readonly__ { [ [ TABLE_show_lic_usage { <feature_name> <lic_installed> <count> <status> <expiry_date> <comments> } ] { [ <application_name> ] + } ] | [ <auth_status> [ TABLE_show_smart_lic_usage { <smart_feature_name> <smart_description> <smart_count> <smart_version> <smart_status> } ] ] } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

usage

Show license usage table

detail

(Optional) Show license usage table

license-feature

(Optional) Show usage of this license package

__readonly__

(Optional) Read only

TABLE_show_lic_usage

(Optional) License usage

feature_name

(Optional) Name of the feature

lic_installed

(Optional) Is the license installed?

count

(Optional) License count

status

(Optional) License status

expiry_date

(Optional) Expiry date of the license

comments

(Optional) License comments

application_name

(Optional) Name of the application using the license

auth_status

(Optional) Brief about smart license usage

TABLE_show_smart_lic_usage

(Optional) Smart License usage

smart_feature_name

(Optional) Name of the feature

smart_description

(Optional) Description of the entitlement

smart_count

(Optional) License count

smart_version

(Optional) License version

smart_status

(Optional) License status

Command Mode

- /exec

show line

show line [ __readonly__ <speed> <databits> <stopbits> <parity> <modem_in> <modem_init_str> <stat> [ TABLE_ps_output <ps> ] [ <speed_aux> <databits_aux> <stopbits_aux> <parity_aux> <modem_in_aux> <modem_init_str_aux> <hw_fc_aux> <stat_aux> [ TABLE_ps_output_aux <ps_aux> ] ] ]

Syntax Description

show

Show running system information

line

Show the line configuration

__readonly__

(Optional)

TABLE_ps_output

(Optional) Process info for console login

TABLE_ps_output_aux

(Optional) Process info for com1 login

speed

(Optional) Port speed(baud)

databits

(Optional) Bits per byte

stopbits

(Optional) Bits

parity

(Optional) Parity

modem_in

(Optional) Modem In

modem_init_str

(Optional) Modem Init-String

stat

(Optional) Statistics

ps

(Optional) Login process

speed_aux

(Optional) Port speed(baud)

databits_aux

(Optional) Bits per byte

stopbits_aux

(Optional) Bits

parity_aux

(Optional) Parity

modem_in_aux

(Optional) Modem In

modem_init_str_aux

(Optional) Modem Init-String

hw_fc_aux

(Optional) Hardware Flowcontrol

stat_aux

(Optional) Statistics

ps_aux

(Optional) Login process

Command Mode

- /exec

show line console

show line console [ __readonly__ <speed> <databits> <stopbits> <parity> <modem_in> <modem_init_str> <stat> [ TABLE_ps_output <ps> ] ]

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

__readonly__

(Optional)

TABLE_ps_output

(Optional) Process info for console login

speed

(Optional) Port speed(baud)

databits

(Optional) Bits per byte

stopbits

(Optional) Bits

parity

(Optional) Parity

modem_in

(Optional) Modem In

modem_init_str

(Optional) Modem Init-String

stat

(Optional) Statistics

ps

(Optional) Login process

Command Mode

- /exec

show line console connected

show line console connected [ __readonly__ <output> ]

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

connected

Show whether the line is currently connected physically

__readonly__

(Optional)

output

(Optional) output string

Command Mode

- /exec

show line console user-input-string

show line console user-input-string [ __readonly__ <input> ]

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

user-input-string

Show user-input init string

__readonly__

(Optional)

input

(Optional) user input string

Command Mode

- /exec

show lisp ddt

show lisp ddt [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp ddt queue

show lisp ddt queue [ [ instance-id <iid> ] { <eid> | <eid6> } ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

queue

Display LISP-DDT Map-Request queue in Map-Resolver

instance-id

(Optional) Show instance-ID summary display

iid

(Optional) Instance-ID for EID-prefix

eid

(Optional) IPv4 EID address

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp ddt referral-cache

{ show lisp ddt referral-cache [ [ instance-id <iid> ] { <eid> | <eid6> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] } | { show lisp ddt referral-cache { ms-ack | ms-referral | node-referral | ms-not-registered | delegation-hole | not-authoritative } [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

referral-cache

Display LISP-DDT referral cache

instance-id

(Optional) Show instance-ID summary display

iid

(Optional) Instance-ID for EID-prefix

eid

(Optional) IPv4 EID address

ms-ack

Referral cache entries to map-servers

ms-referral

Referral cache entries from parent of map-servers

node-referral

Referral cache entries from parent of DDT-nodes

ms-not-registered

Referral cache entries from map-servers

delegation-hole

Referral cache entries from any DDT-node

not-authoritative

Referral cache entries from any DDT-node

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp dynamic-eid

{ show lisp dynamic-eid { summary | { [ <dyn-eid-name> ] [ detail ] } } [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

show

Show running system information

lisp

LISP show commands

dynamic-eid

Display dynamic-EIDs configured and discovered

summary

One-line summary display of discovered dynamic-EIDs

dyn-eid-name

(Optional) Display a single dynamic-EID

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

detail

(Optional) Display discovered dynamic-EIDs

Command Mode

- /exec

show lisp elp

show lisp elp [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

elp

Display LISP Explicit Locator Paths configured

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp negative-prefix

show lisp negative-prefix { <eid> | <eid6> } [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

negative-prefix

Compute negative-prefix for hole in EID space

eid

IPv4 EID address

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp proxy-itr

show lisp proxy-itr [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

proxy-itr

Display discovered proyx-ITRs (PITRs)

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp site

{ show lisp site [ { { <eid> | <eid6> } [ instance-id <iid> ] } | { { <eid-prefix> | <eid-prefix6> } [ instance-id <iid> ] } | <site-name> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

show

Show running system information

lisp

LISP show commands

site

Display Map-Server site EID-prefixes configured

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

eid

(Optional) Display mapping for IP destination EID

eid-prefix

(Optional) Display exact match for IP EID-prefix entry

instance-id

(Optional) Instance EID-prefix registered in

iid

(Optional) Instance-ID value

site-name

(Optional) Display a single site

detail

(Optional) Display allowed registered locator sources

Command Mode

- /exec

show lisp site instance-id

{ show lisp site instance-id [ <iid> ] [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

show

Show running system information

lisp

LISP show commands

site

Display Map-Server site EID-prefixes configured

instance-id

Show instance-ID summary display

iid

(Optional) Show detail for entries of a single Instance-ID

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp smr

show lisp smr [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

smr

Display SMR state for dynamic-EIDs

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp stats-cache

show lisp stats-cache [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

stats-cache

Show dynamic statistics cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lldp all

show lldp all [ __readonly__ TABLE_lldp_all <intf_desc> <lldp_tx> <lldp_rx> <lldp_dcbx> ]

Syntax Description

show

Show running system information

lldp

Show lldp Protocol information

all

Show all interfaces in lldp database

__readonly__

(Optional) Read only

TABLE_lldp_all

(Optional) output of show lldp all

intf_desc

(Optional) Interface desc

lldp_tx

(Optional) lldp tx status

lldp_rx

(Optional) lldp rx status

lldp_dcbx

(Optional) lldp dcbx status

Command Mode

- /exec

show lldp dcbx interface

show lldp dcbx interface <if_in> [ __readonly__ <if_out> <cfg_proto> <det_proto> [ <l_op_ver> <l_max_ver> <l_seq_no> <l_ack_no> ] [ <l_feature> <l_feat_len> <l_cfg> ] + [ <p_op_ver> <p_max_ver> <p_seq_no> <p_ack_no> ] [ <p_tlv_type> <p_tlv_ctrl> <p_tlv_len> <p_tlv_value> ] + ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

dcbx

Show dcbx information

interface

Show lldp interface information

if_in

Enter interface

__readonly__

(Optional)

if_out

(Optional) Interface ID

cfg_proto

(Optional) Configured DCBX Protocol

det_proto

(Optional) DCBX Protocol detected

l_op_ver

(Optional) local dcbx control operation version

l_max_ver

(Optional) local dcbx control maximum version

l_seq_no

(Optional) local dcbx control seq no

l_ack_no

(Optional) local dcbx control ack no

l_feature

(Optional) local feature

l_feat_len

(Optional) Local Feature Length

l_cfg

(Optional) local feature config

p_op_ver

(Optional) peer dcbx control operation version

p_max_ver

(Optional) peer dcbx control maximum version

p_seq_no

(Optional) peer dcbx control seq no

p_ack_no

(Optional) peer dcbx control ack no

p_tlv_type

(Optional) peer TLV type field

p_tlv_ctrl

(Optional) peer TLV control info

p_tlv_len

(Optional) Peer TLV Length

p_tlv_value

(Optional) peer TLV value field

Command Mode

- /exec

show lldp entry

show lldp entry [ <sys-name> ] [ __readonly__ { <neigh_hdr> } { TABLE_entry <chassis_type> <chassis_id> <port_type> <port_id> <l_port_id> <port_desc> <sys_name> <sys_desc> <ttl> <capability> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> <vlan_id> } { <neigh_count> } ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

entry

Show lldp entry information

sys-name

(Optional) WORD Peer's System name

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_entry

(Optional) Table Entry

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

l_port_id

(Optional) Port ID

port_desc

(Optional) Port description

sys_name

(Optional) System name

sys_desc

(Optional) System description

ttl

(Optional) Time to live

capability

(Optional) Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

vlan_id

(Optional) Vlan ID

neigh_count

(Optional)

Command Mode

- /exec

show lldp interface

show lldp interface <if0> [ __readonly__ <interface> <tx_en> <rx_en> <dcbx_en> <port_mac> [ <tlv_type> <tlv_len> [ <tlv_value> ] ] + [ <l_op_ver> <l_max_ver> <l_seq_no> <l_ack_no> [ <l_feature> <l_cfg_len> <l_cfg> ] + ] [ <p_op_ver> <p_max_ver> <p_seq_no> <p_ack_no> [ <p_tlv_type> <p_tlv_len> <p_tlv_value> ] + ] ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

interface

Show lldp interface information

if0

Enter interface

__readonly__

(Optional)

interface

(Optional) Interface ID

tx_en

(Optional) tx enable

rx_en

(Optional) rx enable

dcbx_en

(Optional) dcbx enable

port_mac

(Optional) Port mac address

tlv_type

(Optional) TLV type field

tlv_len

(Optional) TLV len field

tlv_value

(Optional) TLV value field

l_op_ver

(Optional) local dcbx control operation version

l_max_ver

(Optional) local dcbx control maximum version

l_seq_no

(Optional) local dcbx control seq no

l_ack_no

(Optional) local dcbx control ack no

l_feature

(Optional) local feature

l_cfg_len

(Optional) local feature config length

l_cfg

(Optional) local feature config

p_op_ver

(Optional) peer dcbx control operation version

p_max_ver

(Optional) peer dcbx control maximum version

p_seq_no

(Optional) peer dcbx control seq no

p_ack_no

(Optional) peer dcbx control ack no

p_tlv_type

(Optional) peer TLV type field

p_tlv_len

(Optional) peer TLV len field

p_tlv_value

(Optional) peer TLV value field

Command Mode

- /exec

show lldp neighbors

show lldp neighbors [ interface <if> ] [ __readonly__ { <neigh_hdr> } { TABLE_nbor <chassis_type> <chassis_id> <l_port_id> <hold_time> [ <capability> ] <system_capability> <enabled_capability> <port_type> <port_id> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> } { <neigh_count> } ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor

(Optional) Neighbor Table

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

l_port_id

(Optional) Local port ID

hold_time

(Optional) Hold time

capability

(Optional) Capability

system_capability

(Optional) System Capability

enabled_capability

(Optional) Enabled Capability

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

neigh_count

(Optional)

Command Mode

- /exec

show lldp neighbors detail

show lldp neighbors [ interface <if> ] detail [ __readonly__ { <neigh_hdr> } { TABLE_nbor_detail <chassis_type> <chassis_id> <port_type> <port_id> <l_port_id> <port_desc> <sys_name> <sys_desc> <ttl> [ <capability> ] <system_capability> <enabled_capability> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> <vlan_id> } { <neigh_count> } ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

detail

Show lldp neighbor detail information

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor_detail

(Optional) Neighbor detail Table

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

l_port_id

(Optional) Port ID

port_desc

(Optional) Port description

sys_name

(Optional) System name

sys_desc

(Optional) System description

ttl

(Optional) Time to live

capability

(Optional) Capability

system_capability

(Optional) System Capability

enabled_capability

(Optional) Enabled Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

vlan_id

(Optional) Vlan ID

neigh_count

(Optional)

Command Mode

- /exec

show lldp neighbors system-detail

show lldp neighbors [ interface <if> ] system-detail [ __readonly__ { <neigh_hdr> } { TABLE_nbor_sys_detail <sys_type> <sys_name> <l_port_id> <chassis_type> <chassis_id> <port_type> <port_id> <ttl> <capability> <mgmt_addr_type> <mgmt_addr> } { <neigh_count> } ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

system-detail

Show lldp neighbor system detail information

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor_sys_detail

(Optional) Neighbor sys-detail Table

sys_type

(Optional) System Type

sys_name

(Optional) System Name

l_port_id

(Optional) Local port ID

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

ttl

(Optional) Time to live

capability

(Optional) Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

neigh_count

(Optional)

Command Mode

- /exec

show lldp portid-subtype

show lldp portid-subtype [ __readonly__ <portid_subtype> ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

portid-subtype

Show lldp portid-subtype

__readonly__

(Optional)

portid_subtype

(Optional) portid-subtype for LLDP TLV and MIBs

Command Mode

- /exec

show lldp timers

show lldp timers [ __readonly__ <ttl> <reinit> <tx_interval> <tx_delay> <hold_mplier> <notification_interval> ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

timers

Show lldp timers

__readonly__

(Optional)

ttl

(Optional) Time to Live for lldp info

reinit

(Optional) Interface reinit timer

tx_interval

(Optional) Wait interval between successive transmit

tx_delay

(Optional) Delay between successive frame transmissions

hold_mplier

(Optional) Hold multiplier for ttl

notification_interval

(Optional) Notification interval for SNMP trap

Command Mode

- /exec

show lldp tlv-select

show lldp tlv-select [ __readonly__ <management-address-v4> <management-address-v6> <port-description> <port-vlan> <power-management> <system-capabilities> <system-description> <system-name> <dcbxp-cin-cee> [ <dcbxp-cn> ] [ <dcbxp-ets-cfg> ] [ <dcbxp-ets-reco> ] [ <dcbxp-pfc-cfg> ] [ <dcbxp-app-pri> ] [ <dcbxp-app-vlan> ] ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

tlv-select

Show lldp tlv-select

__readonly__

(Optional)

management-address-v4

(Optional) Management address v4

management-address-v6

(Optional) Management address v6

port-description

(Optional) Port description

port-vlan

(Optional) Port vlan

power-management

(Optional) IEEE 802.3 DTE Power via MDI TLV

system-capabilities

(Optional) System capabilities

system-description

(Optional) System description

system-name

(Optional) System name

dcbxp-cin-cee

(Optional) DCBXP CIN or CEE

dcbxp-cn

(Optional) DCBXP Congestion Notification

dcbxp-ets-cfg

(Optional) DCBXP ETS Configuration

dcbxp-ets-reco

(Optional) DCBXP ETS Recommendation

dcbxp-pfc-cfg

(Optional) DCBXP PFC Configuration

dcbxp-app-pri

(Optional) DCBXP Application Priorities

dcbxp-app-vlan

(Optional) DCBXP Application VLAN's

Command Mode

- /exec

show lldp traffic

show lldp traffic [ __readonly__ <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

traffic

Show lldp counters

__readonly__

(Optional)

tx_cnt

(Optional) Transmit count

aged_cnt

(Optional) Aged out count

rx_cnt

(Optional) Received count

rx_err

(Optional) Received error count

disc_cnt

(Optional) Disconnect count

unrecognized_tlv

(Optional) Unrecognized TLV count

Command Mode

- /exec

show lldp traffic interface

show lldp traffic interface <if> [ __readonly__ <interface> <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

traffic

Show lldp counters

interface

Show lldp traffic counters on an interface

if

Enter interface

__readonly__

(Optional)

interface

(Optional) Interface ID

tx_cnt

(Optional) Transmit count

aged_cnt

(Optional) Aged out count

rx_cnt

(Optional) Received count

rx_err

(Optional) Received error count

disc_cnt

(Optional) Disconnect count

unrecognized_tlv

(Optional) Unrecognized TLV count

Command Mode

- /exec

show locator-led status

show locator-led status [ __readonly__ { TABLE_loc_led_stat <component> <status> } ]

Syntax Description

show

Show running system information

locator-led

blink locator led on device

status

status

__readonly__

(Optional)

TABLE_loc_led_stat

(Optional)

component

(Optional)

status

(Optional)

Command Mode

- /exec

show logging

show logging

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

Command Mode

- /exec

show logging console

show logging console

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

console

Show console logging configuration

Command Mode

- /exec

show logging info

show logging info [ __readonly__ { <console_status> [ <console_severity> ] } { <monitor_status> [ <monitor_severity> ] } { <linecard_status> [ <linecard_severity> ] } { <log_timestamp> } [ { <source_interface_status> } [ <source_interface_intf> | <source_interface_intf_index><source_interface_error> ] ] { <server_status> [ { TABLE_logserver <server><forwarding><severity><facility><vrf><port> [ <transport> ] } ] } { { <origin_id_status> } [ <origin_id> ] } [ [ <logflash_status> ] [ <logflash_severity> ] ] { <logfile_status> [ <logfile_name><logfile_severity><logfile_size> ] } { { TABLE_facility <fac_name><def_level><cur_level> } { <fac_info> } } ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

info

Show logging configuration

__readonly__

(Optional)

console_status

(Optional) console logging status

console_severity

(Optional) console logging level

monitor_status

(Optional) monitor logging status

monitor_severity

(Optional) monitor logging level

linecard_status

(Optional) linecard logging status

linecard_severity

(Optional) linecard logging level

log_timestamp

(Optional) timestamp unit

source_interface_status

(Optional) source-interface logging status

source_interface_intf

(Optional) source-interface interface

server_status

(Optional) logging server status

TABLE_logserver

(Optional) output of show logging server

transport

(Optional) remote server transport

origin_id_status

(Optional) origin-id status

origin_id

(Optional) origin-id

logflash_status

(Optional) logflash status

logflash_severity

(Optional) logflash level

logfile_status

(Optional) logfile status

TABLE_facility

(Optional) output of show logging level(facility)

fac_info

(Optional) level info

Command Mode

- /exec

show logging ip access-list cache

show logging ip access-list cache [ detail ] [ __readonly__ <disp_flags> <sgt> <src_ip> <dst_ip> <src_port> <dst_port> <if_index> <proto> <hit_cnt> <acl_name> <acl_num> <acl_permit> <acl_ingress> <acl_type> <acl_appl_if_index> <acl_fltr_hit_cnt> ]

Syntax Description

show

Show running system information

logging

logging information

ip

IP configuration

access-list

Access-list

cache

logging

detail

(Optional) Show additional details about entries in cache

__readonly__

(Optional)

disp_flags

(Optional) Display flags

sgt

(Optional) SGT

src_ip

(Optional) Source IP

dst_ip

(Optional) Dest IP

src_port

(Optional) Source port

dst_port

(Optional) Dest port

if_index

(Optional) Interface

proto

(Optional) Protocol

hit_cnt

(Optional) Hits

acl_name

(Optional) ACL Name

acl_num

(Optional) ACL Number

acl_permit

(Optional) ACL Permit

acl_ingress

(Optional) ACL Ingress

acl_type

(Optional) ACL Filter Type

acl_appl_if_index

(Optional) ACL Applied Interface

acl_fltr_hit_cnt

(Optional) ACL Filter Count

Command Mode

- /exec

show logging ip access-list status

show logging ip access-list status [ __readonly__ <num_entries> <seconds> <num_packets> ]

Syntax Description

show

Show running system information

logging

logging information

ip

IP configuration

access-list

Access-list

status

ACLLOG status

__readonly__

(Optional)

num_entries

(Optional) Max flows

seconds

(Optional) Log-update interval in seconds

num_packets

(Optional) threshold

Command Mode

- /exec

show logging last

show logging last <i0>

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

last

Show last few lines of logfile

i0

Enter number of lines to display

Command Mode

- /exec

show logging level

show logging level [ { auth | authpriv | cron | daemon | ftp | kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | mail | news | syslog | user | uucp } ] [ __readonly__ { TABLE_facility <fac_name> <def_level> <cur_level> } ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

auth

(Optional) Show Authorization System logging configuration

authpriv

(Optional) Show Authorization (Private) logging configuration

cron

(Optional) Show Cron/at facility logging configuration

daemon

(Optional) Show System daemons logging configuration

ftp

(Optional) Show File Transfer System logging configuration

kernel

(Optional) Show kernel logging configuration

local0

(Optional) Show Local use daemons logging configuration

local1

(Optional) Show Local use daemons logging configuration

local2

(Optional) Show Local use daemons logging configuration

local3

(Optional) Show Local use daemons logging configuration

local4

(Optional) Show Local use daemons logging configuration

local5

(Optional) Show Local use daemons logging configuration

local6

(Optional) Show Local use daemons logging configuration

local7

(Optional) Show Local use daemons logging configuration

lpr

(Optional) Show Line Printer System logging configuration

mail

(Optional) Show Mail System logging configuration

news

(Optional) Show USENET news logging configuration

syslog

(Optional) Show Internal Syslog Messages logging configuration

user

(Optional) Show user process logging configuration

uucp

(Optional) Show Unix-to-Unix copy system logging configuration

__readonly__

(Optional)

fac_name

(Optional) facility names

TABLE_facility

(Optional)

def_level

(Optional) default severity

cur_level

(Optional) current severity

Command Mode

- /exec

show logging level

show logging level

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level aaa

show logging level aaa

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

aaa

Show aaa logging configuration

Command Mode

- /exec

show logging level acllog

show logging level acllog

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

acllog

Show acllog logging configuration

Command Mode

- /exec

show logging level aclmgr

show logging level aclmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

aclmgr

Show aclmgr logging configuration

Command Mode

- /exec

show logging level adbm

show logging level adbm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

adbm

Show adbm logging configuration

Command Mode

- /exec

show logging level adjmgr

show logging level adjmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

adjmgr

Show adjmgr logging configuration

Command Mode

- /exec

show logging level amt

show logging level amt

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

amt

Show amt logging configuration

Command Mode

- /exec

show logging level arp

show logging level arp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

arp

Show arp logging configuration

Command Mode

- /exec

show logging level ascii-cfg

show logging level ascii-cfg

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ascii-cfg

Show ascii-cfg logging configuration

Command Mode

- /exec

show logging level assoc_mgr

show logging level assoc_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

assoc_mgr

Show Association Manager Logging Configuration

Command Mode

- /exec

show logging level backup

show logging level { backup | flexlink }

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

backup

Show Switchport Backup logging level

flexlink

Show Switchport Backup logging level

Command Mode

- /exec

show logging level bfd

show logging level bfd

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bfd

Show bfd logging configuration

Command Mode

- /exec

show logging level bgp

show logging level bgp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bgp

Show BGP logging configuration

Command Mode

- /exec

show logging level bloggerd

show logging level bloggerd

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bloggerd

Show BloggerD logging configuration

Command Mode

- /exec

show logging level bootvar

show logging level bootvar

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bootvar

Show bootvar logging configuration

Command Mode

- /exec

show logging level callhome

show logging level callhome

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

callhome

Show callhome logging configuration

Command Mode

- /exec

show logging level capability

show logging level capability

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

capability

Show capability logging configuration

Command Mode

- /exec

show logging level catena

show logging level catena

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

catena

Show catena logging configuration

Command Mode

- /exec

show logging level cdp

show logging level cdp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cdp

Show CDP logging configuration

Command Mode

- /exec

show logging level cert-enroll

show logging level cert-enroll

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cert-enroll

Show Cert-enroll logging configuration

Command Mode

- /exec

show logging level cert_enroll

show logging level cert_enroll

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cert_enroll

Show Cert-enroll logging configuration

Command Mode

- /exec

show logging level cfs

show logging level cfs

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level clis

show logging level clis

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

clis

Show CLIS logging configuration

Command Mode

- /exec

show logging level clk_mgr

show logging level clk_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

clk_mgr

Show clock manager logging configuration

Command Mode

- /exec

show logging level confcheck

show logging level confcheck

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

confcheck

Show confcheck logging configuration

Command Mode

- /exec

show logging level copp

show logging level copp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

copp

Show copp logging configuration

Command Mode

- /exec

show logging level core

show logging level core

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

core

Show core daemon logging configuration

Command Mode

- /exec

show logging level cts

show logging level cts

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cts

Show cts logging configuration

Command Mode

- /exec

show logging level dhcp_snoop

show logging level dhcp_snoop

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

dhcp_snoop

Show DHCP snoop logging configuration

Command Mode

- /exec

show logging level diagnostic device_test

show logging level diagnostic device_test

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

device_test

Show device_test logging configuration

Command Mode

- /exec

show logging level diagnostic diagclient

show logging level diagnostic diagclient

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

diagclient

Show diagclient logging configuration

Command Mode

- /exec

show logging level diagnostic diagmgr

show logging level diagnostic diagmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

diagmgr

Show diagmgr logging configuration

Command Mode

- /exec

show logging level dot1x

show logging level dot1x

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

dot1x

Show dot1x logging configuration

Command Mode

- /exec

show logging level ecp

show logging level ecp

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ecp

Set syslog filter level for ECP

Command Mode

- /exec

show logging level eigrp

show logging level eigrp [ <eigrp-ptag> ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

eigrp

Show EIGRP logging configuration

eigrp-ptag

(Optional) Process tag

Command Mode

- /exec

show logging level eltm

show logging level eltm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

eltm

Show eltm logging configuration

Command Mode

- /exec

show logging level epp

show logging level epp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

epp

Show epp logging configuration

Command Mode

- /exec

show logging level ethdstats

show logging level ethdstats

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ethdstats

Show delta statistics logging configuration

Command Mode

- /exec

show logging level ethpm

show logging level ethpm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ethpm

Show ethpm logging configuration

Command Mode

- /exec

show logging level evb

show logging level evb

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evb

Set syslog filter level for EVB

Command Mode

- /exec

show logging level evmc

show logging level evmc

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evmc

Show level for evmc syslog messages

Command Mode

- /exec

show logging level evmed

show logging level evmed

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evmed

Show level for evmed syslog messages

Command Mode

- /exec

show logging level evms

show logging level evms

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evms

Show level for evms syslog messages

Command Mode

- /exec

show logging level fabric forwarding

show logging level fabric forwarding

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

Command Mode

- /exec

show logging level fcoe_mgr

show logging level fcoe_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

fcoe_mgr

Show fcoe_mgr logging configuration

Command Mode

- /exec

show logging level feature-mgr

show logging level feature-mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

feature-mgr

Show feature manager logging configuration

Command Mode

- /exec

show logging level fs-daemon

show logging level fs-daemon

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

fs-daemon

Show fs-daemon logging configuration

Command Mode

- /exec

show logging level gpixm

show logging level gpixm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

gpixm

Show global-pixm logging configuration

Command Mode

- /exec

show logging level hardware-telemetry

show logging level hardware-telemetry

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

hardware-telemetry

Show hardware-telemetry logging configuration

Command Mode

- /exec

show logging level hsrp

show logging level hsrp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

hsrp

Show HSRP logging configuration

Command Mode

- /exec

show logging level icam

show logging level icam

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

icam

Show icam logging configuration

Command Mode

- /exec

show logging level im

show logging level im

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

im

Show im logging configuration

Command Mode

- /exec

show logging level imp

show logging level imp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

imp

Show imp logging configuration

Command Mode

- /exec

show logging level interface-vlan

show logging level interface-vlan

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

interface-vlan

Show interface-vlan logging configuration

Command Mode

- /exec

show logging level ip igmp

show logging level ip igmp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

Display IP information

igmp

Show igmp logging configuration

Command Mode

- /exec

show logging level ip msdp

show logging level ip msdp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

Display IP information

msdp

Show msdp logging configuration

Command Mode

- /exec

show logging level ip sla responder

show logging level ip sla responder

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

sla

Service Level Agreement (SLA)

responder

Show sla-responder logging configuration

Command Mode

- /exec

show logging level ip sla sender

show logging level ip sla sender

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

sla

Service Level Agreement (SLA)

sender

Show sla-sender logging configuration

Command Mode

- /exec

show logging level ip sla twamp-server

show logging level ip sla twamp-server

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

sla

Service Level Agreement (SLA)

twamp-server

Show sla-twamp-server logging configuration

Command Mode

- /exec

show logging level ipconf

show logging level ipconf [ ipv6 ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ipconf

Show ipconf logging configuration

ipv6

(Optional) Show ipv6 Conf logging configuration

Command Mode

- /exec

show logging level ipfib

show logging level ipfib

Syntax Description

show

show

logging

logging

level

level

ipfib

ipfib

Command Mode

- /exec

show logging level ipqos

show logging level ipqos

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level ipv6 icmp

show logging level ipv6 icmp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ipv6

Configure IPv6 features

icmp

Show icmpv6 logging configuration

Command Mode

- /exec

show logging level iscm

show logging level iscm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

iscm

Show iscm logging configuration

Command Mode

- /exec

show logging level iscm

show logging level iscm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

iscm

Show iscm logging configuration

Command Mode

- /exec

show logging level isis

show logging level isis

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

isis

Show ISIS logging configuration

Command Mode

- /exec

show logging level keystore

show logging level { keystore | sksd }

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

keystore

Show Keystore logging configuration

sksd

show Keystore/sksd logging configuration

Command Mode

- /exec

show logging level l2fm

show logging level l2fm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

l2fm

Show l2fm logging configuration

Command Mode

- /exec

show logging level l3vm

show logging level l3vm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

l3vm

Show L3VM logging configuration

Command Mode

- /exec

show logging level lacp

show logging level lacp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

lacp

Show lacp logging configuration

Command Mode

- /exec

show logging level ldap

show logging level ldap

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ldap

Show ldap logging configuration

Command Mode

- /exec

show logging level license

show logging level { license | licmgr }

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

license

Show Licensing logging configuration

licmgr

Show Licensing logging configuration

Command Mode

- /exec

show logging level lim

show logging level lim

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

lim

Show lim logging configuration

Command Mode

- /exec

show logging level lldp

show logging level lldp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

lldp

Show LLDP logging configuration

Command Mode

- /exec

show logging level m2rib

show logging level m2rib

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

m2rib

Show M2RIB logging configuration

Command Mode

- /exec

show logging level mfdm

show logging level mfdm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mfdm

Show mfdm logging configuration

Command Mode

- /exec

show logging level mfwd

show logging level mfwd

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mfwd

Show MCASTFWD logging configuration

Command Mode

- /exec

show logging level mmode

show logging level mmode

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mmode

Show maintenance mode logging configuration

Command Mode

- /exec

show logging level module

show logging level module

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

module

Show module(linecard) manager logging configuration

Command Mode

- /exec

show logging level monitor

show logging level monitor

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

monitor

Show monitor logging configuration

Command Mode

- /exec

show logging level mpls manager

show logging level mpls manager

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mpls

Show MPLS logging configuration

manager

Show MPLS manager logging configuration

Command Mode

- /exec

show logging level mpls switching

show logging level mpls switching

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mpls

Show MPLS logging configuration

switching

Show mpls switching logging configuration

Command Mode

- /exec

show logging level mpls traffic-eng

show logging level mpls traffic-eng

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mpls

Display MPLS status and configuration

traffic-eng

Show Traffic Engineering logging configuration

Command Mode

- /exec

show logging level mvsh

show logging level mvsh

Syntax Description

show

Show commands

logging

Show message logging facilities

level

Show message logging facilities

mvsh

Show level for mvsh syslog messages

Command Mode

- /exec

show logging level nat

show logging level nat

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

nat

Show NAT logging configurarion

Command Mode

- /exec

show logging level nbm

show logging level nbm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

nbm

Show Non Blocking Multicast logging configuration

Command Mode

- /exec

show logging level netstack

show logging level netstack

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

netstack

Show netstack logging configuration

Command Mode

- /exec

show logging level nfm

show logging level nfm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

nfm

Show NFM logging configuration

Command Mode

- /exec

show logging level ngoam

show logging level ngoam

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ngoam

Show ngoam logging level

Command Mode

- /exec

show logging level npv

show logging level npv

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

npv

Show npv logging configuration

Command Mode

- /exec

show logging level ntp

show logging level ntp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ntp

Show NTP logging settings.

Command Mode

- /exec

show logging level nve

show logging level nve

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

nve

Show NVE logging configuration

Command Mode

- /exec

show logging level nxsdk

show logging level nxsdk

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

nxsdk

NXOS SDK

Command Mode

- /exec

show logging level openflow

show logging level openflow

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

openflow

Show OpenFlow agent logging configuration

Command Mode

- /exec

show logging level ospf

show logging level ospf

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ospf

Show OSPF logging configuration

Command Mode

- /exec

show logging level ospfv3

show logging level ospfv3

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ospfv3

Display OSPFv3 status and configuration

Command Mode

- /exec

show logging level pfstat

show logging level pfstat

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

pfstat

Show pfstat logging configuration

Command Mode

- /exec

show logging level pim

show logging level [ ipv6 ] pim

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ipv6

(Optional) Display IPv6 information

pim

Show pim6 logging configuration

Command Mode

- /exec

show logging level pim

show logging level [ ip ] pim

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

(Optional) Display IP information

pim

Show pim logging configuration

Command Mode

- /exec

show logging level pixm

show logging level pixm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

pixm

Show vdc-local-pixm logging configuration

Command Mode

- /exec

show logging level pktmgr

show logging level pktmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

pktmgr

Show pktmgr logging configuration

Command Mode

- /exec

show logging level platform

show logging level platform

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

platform

Show platform logging configuration

Command Mode

- /exec

show logging level plbm

show logging level plbm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

plbm

Show plbm logging configuration

Command Mode

- /exec

show logging level plcmgr

show logging level plcmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level pltfm_config

show logging level pltfm_config

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

pltfm_config

Show pltfm_config logging configuration

Command Mode

- /exec

show logging level plugin

show logging level plugin

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

plugin

Show plugin logging configuration

Command Mode

- /exec

show logging level poap

show logging level poap

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

poap

Show poap logging configuration

Command Mode

- /exec

show logging level poed

show logging level poed

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

poed

Show PoE Daemon Logging Configuration

Command Mode

- /exec

show logging level port-channel

show logging level port-channel

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

port-channel

Show port-channel logging configuration

Command Mode

- /exec

show logging level port-profile

show logging level port-profile

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

port-profile

Show syslog level for port-profile

Command Mode

- /exec

show logging level port-resources

show logging level port-resources

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

port-resources

Show port-resources logging configuration

Command Mode

- /exec

show logging level port-security

show logging level port-security

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

port-security

Show port-security logging configuration

Command Mode

- /exec

show logging level port

show logging level port

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

port

Show port logging configuration

Command Mode

- /exec

show logging level private-vlan

show logging level private-vlan

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

private-vlan

Show interface-vlan logging configuration

Command Mode

- /exec

show logging level ptp

show logging level ptp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ptp

Show ptp logging configuration

Command Mode

- /exec

show logging level radius

show logging level radius

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

radius

Show radius logging configuration

Command Mode

- /exec

show logging level res_mgr

show logging level res_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

res_mgr

Show res_mgr logging configuration

Command Mode

- /exec

show logging level rip

show logging level rip

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

rip

Show RIP logging configuration

Command Mode

- /exec

show logging level routing ipv6 multicast

show logging level routing ipv6 multicast

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

routing

Display routing information

ipv6

Display IPv6 information

multicast

Display multicast information

Command Mode

- /exec

show logging level routing multicast

show logging level routing [ ip | ipv4 ] multicast

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

multicast

Display multicast information

Command Mode

- /exec

show logging level rpm

show logging level rpm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

rpm

Show RPM logging configuration

Command Mode

- /exec

show logging level sal

show logging level sal

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

sal

Show SAL logging configuration

Command Mode

- /exec

show logging level san-port-channel

show logging level san-port-channel

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

san-port-channel

Show san-port-channel logging configuration

Command Mode

- /exec

show logging level san-port-channel

show logging level san-port-channel

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

san-port-channel

Show san-port-channel logging configuration

Command Mode

- /exec

show logging level scheduler

show logging level scheduler

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

scheduler

Show scheduler logging configuration

Command Mode

- /exec

show logging level security

show logging level security

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

security

Show security logging configuration

Command Mode

- /exec

show logging level segment-routing

show logging level segment-routing

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

segment-routing

Show SR logging configuration

Command Mode

- /exec

show logging level session-mgr

show logging level session-mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

session-mgr

Show session-mgr logging configurarion

Command Mode

- /exec

show logging level sflow

show logging level sflow

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

sflow

Show sFlow logging configuration

Command Mode

- /exec

show logging level smartc

show logging level smartc

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

smartc

Show smartc logging configuration

Command Mode

- /exec

show logging level smm

show logging level smm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

smm

Show Shared Memory Manager logging configuration

Command Mode

- /exec

show logging level snmpd

show logging level snmpd

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

snmpd

Show SNMP logging configuration

Command Mode

- /exec

show logging level snmpmib_proc

show logging level snmpmib_proc

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

snmpmib_proc

Show snmpmib_proc logging configuration

Command Mode

- /exec

show logging level spanning-tree

show logging level spanning-tree

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

spanning-tree

Show spanning-tree logging configuration

Command Mode

- /exec

show logging level spm

show logging level spm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

spm

Show spm logging configuration

Command Mode

- /exec

show logging level stripcl

show logging level stripcl

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

stripcl

Show stripcl logging configuration

Command Mode

- /exec

show logging level sysmgr

show logging level sysmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

sysmgr

Show sysmgr logging configuration

Command Mode

- /exec

show logging level tacacs

show logging level tacacs

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

tacacs

Show tacacs+ logging configuration

Command Mode

- /exec

show logging level telemetry

show logging level telemetry

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

telemetry

Show telemetry logging level

Command Mode

- /exec

show logging level track

show logging level track

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

track

Show track logging configuration

Command Mode

- /exec

show logging level tunnel

show logging level tunnel

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

tunnel

Show tunnel logging settings

Command Mode

- /exec

show logging level u2rib

show logging level u2rib

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

u2rib

Show U2RIB logging configuration

Command Mode

- /exec

show logging level u6rib

show logging level u6rib

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

u6rib

Show U6RIB logging configuration

Command Mode

- /exec

show logging level udld

show logging level udld

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

udld

Show udld logging configuration

Command Mode

- /exec

show logging level ufdm

show logging level ufdm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ufdm

Show ufdm logging configuration

Command Mode

- /exec

show logging level urib

show logging level urib

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

urib

Show URIB logging configuration

Command Mode

- /exec

show logging level vdc_mgr

show logging level vdc_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vdc_mgr

Show vdc manager logging configuration

Command Mode

- /exec

show logging level virtual-service

show logging level virtual-service

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

virtual-service

Show virtualization manager logging configuration

Command Mode

- /exec

show logging level vlan_mgr

show logging level vlan_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vlan_mgr

Show vlan manager logging configuration

Command Mode

- /exec

show logging level vmm

show logging level vmm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vmm

Show vmm logging configuration

Command Mode

- /exec

show logging level vmtracker

show logging level vmtracker

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vmtracker

Show vmtracker logging configuration

Command Mode

- /exec

show logging level vpc

show logging level vpc

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vpc

Show vPC logging configuration

Command Mode

- /exec

show logging level vrrp-cfg

show logging level vrrp-cfg

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vrrp-cfg

Show vrrp-cfg logging configuration

Command Mode

- /exec

show logging level vrrp-eng

show logging level vrrp-eng

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vrrp-eng

Show vrrp-eng logging configuration

Command Mode

- /exec

show logging level vrrpv3

show logging level vrrpv3

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vrrpv3

level for vrrpv3 configuration

Command Mode

- /exec

show logging level vsan

show logging level vsan

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vsan

Show vsan logging configuration

Command Mode

- /exec

show logging level vshd

show logging level vshd

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level vtp

show logging level vtp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vtp

Show vtp logging configuration

Command Mode

- /exec

show logging level wwn

show logging level wwn

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

wwn

Show wwn logging configuration

Command Mode

- /exec

show logging level xbar

show logging level xbar

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging logfile

show logging logfile

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

Command Mode

- /exec

show logging logfile duration

show logging logfile duration <s1>

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

duration

show messages from logfile of last given duration

s1

Enter hour, minutes, seconds of duration as HH:MM:SS

Command Mode

- /exec

show logging logfile last-index

show logging logfile last-index

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

last-index

Show the sequence-number of the last message in logfile

Command Mode

- /exec

show logging logfile start-seqn

show logging logfile start-seqn <i0> [ end-seqn <i1> ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

start-seqn

Show messages from logfile from a given start-sequence-number

i0

Enter starting sequence number

end-seqn

(Optional) Show messages from logfile from a given end-sequence-number

i1

(Optional) Enter ending sequence number

Command Mode

- /exec

show logging logfile start-time

show logging logfile start-time <i0> <s0> <i1> <s1> [ end-time <i2> <s2> <i3> <s3> ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

start-time

Show messages from logfile from a given start-time

i0

Enter year in YYYY format

s0

Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

i1

Enter day of month in dd format

s1

Enter hour, minutes, seconds as HH:MM:SS

end-time

(Optional) Show messages from logfile up to a given end-time

i2

(Optional) Enter year in YYYY format

s2

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

i3

(Optional) Enter day of month in dd format

s3

(Optional) Enter hour, minutes, seconds as HH:MM:SS

Command Mode

- /exec

show logging loopback

show logging loopback

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

loopback

Show logging loopback configuration

Command Mode

- /exec

show logging module

show logging module

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

module

Show module(linecard) logging configuration

Command Mode

- /exec

show logging monitor

show logging monitor

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

monitor

Show monitor logging configuration

Command Mode

- /exec

show logging nvram

show logging nvram [ [ { last <i0> } ] [ __readonly__ [ <error> ] [ { TABLE_nvram <log> } ] ] ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

nvram

Show NVRAM log

last

(Optional) Show last few lines of nvram log

i0

(Optional) Enter number of lines to display

__readonly__

(Optional)

error

(Optional) error message

TABLE_nvram

(Optional) nvram log prints

log

(Optional) single log line

Command Mode

- /exec

show logging onboard

show logging onboard [ card-first-power-on | card-boot-history | <common_options> | endtime <s0> [ { <common_options> | error-stats [ port <i0> ] } ] | error-stats [ port1 <i1> ] | module <module> [ <common_options> | endtime1 <s1> [ { <common_options> | error-stats [ port3 <i3> ] } ] | error-stats [ port4 <i4> ] | starttime <s2> [ { <common_options> | endtime2 <s3> [ { <common_options> | error-stats [ port6 <i6> ] } ] | error-stats [ port7 <i7> ] } ] | card-first-power-on | card-boot-history ] | obfl-logs | starttime1 <s4> [ { <common_options> | endtime3 <s5> [ { <common_options> | error-stats [ port8 <i8> ] } ] | error-stats [ port9 <i9> ] } ] | credit-loss [ module <module> [ last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] | flow-control { pause-count [ module <module> [ last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] | pause-events [ module <module> [ last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] | request-timeout [ module <module> ] | timeout-drops [ module <module> [ port10 <i10> [ last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] } ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

onboard

Show OBFL information

card-first-power-on

(Optional) show card first power on information

card-boot-history

(Optional) show card boot history

endtime

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s0

(Optional) End time format - mm/dd/yy-HH:MM:SS

error-stats

(Optional) Show OBFL error statistics

port

(Optional) Show OBFL error statistics for a port

i0

(Optional)

common_options

(Optional) give the options

port1

(Optional) Show OBFL error statistics for a port

i1

(Optional)

module

(Optional) Show OBFL information for Module

module

(Optional) Enter module number

endtime1

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s1

(Optional) End time format - mm/dd/yy-HH:MM:SS

port3

(Optional) Show OBFL error statistics for a port

i3

(Optional)

port4

(Optional) Show OBFL error statistics for a port

i4

(Optional)

starttime

(Optional) Show OBFL logs from start time mm/dd/yy-HH:MM:SS

s2

(Optional) Start time format - mm/dd/yy-HH:MM:SS

endtime2

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s3

(Optional) End time format - mm/dd/yy-HH:MM:SS

port6

(Optional) Show OBFL error statistics for a port

i6

(Optional)

port7

(Optional) Show OBFL error statistics for a port

i7

(Optional)

starttime1

(Optional) Show OBFL logs from start time mm/dd/yy-HH:MM:SS

s4

(Optional) Start time format - mm/dd/yy-HH:MM:SS

endtime3

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s5

(Optional) End time format - mm/dd/yy-HH:MM:SS

port8

(Optional) Show OBFL error statistics for a port

i8

(Optional)

port9

(Optional) Show OBFL error statistics for a port

i9

(Optional)

obfl-logs

(Optional) Show OBFL Tech Support Log.

timeout-drops

(Optional) Show OBFL Timeout Drops logs

port10

(Optional) Show OBFL statistics per port basis

i10

(Optional)

credit-loss

(Optional) Show OBFL Credit Loss logs

last

(Optional) Show last min/hour/day logs

last_no

(Optional) Duration in min/hrs/day

minutes

(Optional) entry in minutes

hours

(Optional) entry in hours

days

(Optional) entry in days

request-timeout

(Optional) Show OBFL request timeout log

flow-control

(Optional) Show OBFL Flow Control log

pause-count

(Optional) Show Flow Control Pause Count Logs

pause-events

(Optional) Show Flow Control Pause Event Logs

Command Mode

- /exec

show logging onboard

show logging onboard { counter-stats | endtime <s0> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } | module <module> { counter-stats | endtime1 <s1> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } | starttime <s2> [ { counter-stats | endtime2 <s3> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } } ] } | starttime1 <s4> [ { counter-stats | endtime3 <s5> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } } ] }

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

onboard

Show OBFL information

counter-stats

Show OBFL counter statistics

endtime

Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s0

End time format - mm/dd/yy-HH:MM:SS

internal

(Optional) Show Logging Onboard Internal

module

Show OBFL information for Module

module

Enter module number

endtime1

Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s1

End time format - mm/dd/yy-HH:MM:SS

starttime

Show OBFL logs from start time mm/dd/yy-HH:MM:SS

s2

Start time format - mm/dd/yy-HH:MM:SS

endtime2

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s3

(Optional) End time format - mm/dd/yy-HH:MM:SS

starttime1

Show OBFL logs from start time mm/dd/yy-HH:MM:SS

s4

Start time format - mm/dd/yy-HH:MM:SS

endtime3

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s5

(Optional) End time format - mm/dd/yy-HH:MM:SS

dc3_options

(Optional) dc3 options

Command Mode

- /exec

show logging onboard kernel-trace

show logging onboard kernel-trace

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

onboard

Show OBFL information

kernel-trace

Show OBFL Kernel Trace

Command Mode

- /exec

show logging origin-id

show logging origin-id

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

origin-id

Show logging origin id configuration

Command Mode

- /exec

show logging pending-diff

show logging pending-diff

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

pending-diff

server address pending configuration diff

Command Mode

- /exec

show logging pending

show logging pending

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

pending

server address pending configuration

Command Mode

- /exec

show logging rate-limit

show logging rate-limit

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

rate-limit

Show rate limit configuration

Command Mode

- /exec

show logging server

show logging server [ __readonly__ [ <noentry> ] [ { TABLE_logserv <server> <forwarding> <severity> <facility> <vrf> <port> [ <transport> ] } ] ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

server

Show server logging configuration

__readonly__

(Optional)

noentry

(Optional) logging server not configured

TABLE_logserv

(Optional) output of show logging server

server

(Optional) remote server address

forwarding

(Optional) remote server forwarding

severity

(Optional) remote server severity

facility

(Optional) remote server facility

vrf

(Optional) remote server vrf

port

(Optional) remote server port

transport

(Optional) remote server transport

Command Mode

- /exec

show logging session status

show logging session status

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

session

Show logging session status

status

Show logging session status

Command Mode

- /exec

show logging source-interface

show logging source-interface

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

source-interface

Show logging source-interface configuration

Command Mode

- /exec

show logging status

show logging status

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

status

Show logging status

Command Mode

- /exec

show logging timestamp

show logging timestamp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

timestamp

Show logging timestamp configuration

Command Mode

- /exec

show login on-failure log

show login on-failure log [ __readonly__ [ <status> ] ]

Syntax Description

show

show

login

login

on-failure

authentication failure

log

Log

__readonly__

(Optional)

status

(Optional) login on failure log enabled or disabled

Command Mode

- /exec

show login on-successful log

show login on-successful log [ __readonly__ [ <status> ] ]

Syntax Description

show

show

login

login

on-successful

authentication successful

log

Log

__readonly__

(Optional)

status

(Optional) login on successful log enabled or disabled

Command Mode

- /exec

Chapter 13. M Show Commands

- show mac-list

- show mac address-table

- show mac address-table

- show mac address-table aging-time

- show mac address-table count

- show mac address-table count es

- show mac address-table learning-mode

- show mac address-table limit

- show mac address-table loop-detect

- show mac address-table multicast

- show mac address-table notification mac-move

- show mac vdc

- show macsec mka

- show macsec mka session

- show macsec mka statistics

- show macsec policy

- show macsec secy statistics

- show maintenance maint-delay

- show maintenance on-reload reset-reasons

- show maintenance profile

- show maintenance snapshot-delay

- show maintenance timeout

- show mcectest

- show mcectest mcec interface

- show mgmt-policy

- show module

- show module bandwidth-fairness

- show module supported

- show module uptime

- show monitor

- show monitor session

- show mpls forwarding statistics

- show mpls interfaces

- show mpls interfaces detail

- show mpls interfaces statistics

- show mpls ip bindings

- show mpls ip bindings summary

- show mpls ip ttl

- show mpls label range

- show mpls label statistics

- show mpls oam echo statistics

- show mpls static binding

- show mpls static binding

- show mpls static binding vrf per-vrf

- show mpls static trace

- show mpls strip labels

- show mpls switching

- show mpls switching clients

- show mvpn bgp mdt

- show mvpn mdt encap

- show mvpn mdt route

- show mvr

- show mvr groups

- show mvr interface

- show mvr members

- show mvr members count

- show mvr members vlan

- show mvr receiver-ports

- show mvr source-ports

show mac-list

show mac-list { [ <mac_list_name> [ { seq <seq_no> | { <mac_addr> [ <mac_mask> ] } } ] ] } [ __readonly__ TABLE_mac_list <name> <seq> <action> <rule> ]

Syntax Description

show

Show running system information

mac-list

Show mac-lists

mac_list_name

(Optional) Name of mac list

seq

(Optional) Sequence number

seq_no

(Optional) Sequence number

mac_addr

(Optional) MAC address

mac_mask

(Optional) MAC mask

__readonly__

(Optional)

TABLE_mac_list

(Optional)

name

(Optional)

seq

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show mac address-table

show mac address-table <module> [ count ] [ static | dynamic | secure ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> | [ vdc1 <vdc> | <e-vdc> ] | fe1 <feid> ] + } | { [ address <mac-addr> | interface <interface-name> | vlan <id> | [ vdc <vdc> | <e-vdc> ] | fe <feid> ] + } ] [ hex ] [ __readonly__ <entrycount> <l2entry> <header> <pi_e> <age> <rm> <ifname> <sec> <ntfy> <type> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

module

Module Number

count

(Optional) Number of entries

static

(Optional) Display Static Entries

dynamic

(Optional) Display Dynamic Entries

secure

(Optional) Display Secure Entries

address

(Optional) address

address1

(Optional) address

mac-addr

(Optional) MAC Address

switch-id

(Optional) Remote Switch ID

swid

(Optional) Switch ID

sub-switch-id

(Optional) Remote Sub Switch ID

sswid

(Optional) Sub Switch ID

interface

(Optional) Interface

interface-name

(Optional) Interface name

vlan

(Optional) VLAN

vlan1

(Optional) VLAN

id

(Optional) VLAN ID

vdc

(Optional) VDC ID or Name

vdc1

(Optional) VDC ID or Name

vdc

(Optional) VDC ID

e-vdc

(Optional) Select VDC ID that match VDC Name

fe

(Optional) Forwarding Engine Instance ID(Zero based)

fe1

(Optional) Forwarding Engine Instance ID(Zero based)

feid

(Optional) FE ID value

hex

(Optional) display swid/sswid/lid in hex

__readonly__

(Optional)

header

(Optional) Header

pi_e

(Optional) Primary Interface of EARL

age

(Optional) Last seen age in seconds

rm

(Optional) RM

ifname

(Optional) interface name as string

sec

(Optional) secure

ntfy

(Optional) notify

entrycount

(Optional) Number of L2 entries

l2entry

(Optional) L2 Entry String

type

(Optional) MAC type - Static or Dynamic

Command Mode

- /exec

show mac address-table

show mac address-table [ static | dynamic | secure ] [ local ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> ] + } | { [ address <mac-addr> | interface <interface-name> | vlan <id> ] + } | { [ address2 <mac-addr> | interface1 <interface-name> | vni <vni-id> | peer-ip <peer-ipv4> ] + } | { [ address3 <mac-addr> | interface2 <interface-name> | vni1 <vni-id> | es { <esid-opt1> | <esid-opt2> | all } ] + } ] [ __readonly__ [ { TABLE_mac_address <disp_mac_addr><disp_type><disp_vlan> [ <disp_is_static> ] <disp_age><disp_is_secure><disp_is_ntfy><disp_port> } ] ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

static

(Optional) Display Static Entries

dynamic

(Optional) Display Dynamic Entries

secure

(Optional) Display Secure Entries

local

(Optional) Display MAC Entries Learned Locally and Not on the Overlay/VXLAN

address

(Optional) address

address1

(Optional) address

address2

(Optional) address

address3

(Optional) address

mac-addr

(Optional) MAC Address

switch-id

(Optional) Remote Switch ID

swid

(Optional) Switch ID

sub-switch-id

(Optional) Remote Sub Switch ID

sswid

(Optional) Sub Switch ID

interface

(Optional) Interface

interface1

(Optional) Interface

interface-name

(Optional) Interface name

interface2

(Optional) Interface

interface-name

(Optional) Interface name

vlan

(Optional) VLAN

vlan1

(Optional) VLAN

id

(Optional) VLAN ID

vni

(Optional) VXLAN Network Identifier

vni1

(Optional) VXLAN Network Identifier

vni-id

(Optional) VXLAN Network Identifier

peer-ip

(Optional) VXLAN Peer IP Address

peer-ipv4

(Optional) VXLAN Peer IP Address

es

(Optional) EVPN Remote ESID

esid-opt1

(Optional) EE:EE:EE:EE:EE:EE:EE:EE:EE:EE ESID Option 1

esid-opt2

(Optional) EEEE.EEEE.EEEE.EEEE.EEEE ESID Option 2

all

(Optional) all ESIs

__readonly__

(Optional)

TABLE_mac_address

(Optional) Mac address table

disp_is_static

(Optional) Static/Dynamic

Command Mode

- /exec

show mac address-table aging-time

show mac address-table aging-time [ __readonly__ <age_str> <age> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

aging-time

Configured/default age

__readonly__

(Optional)

age_str

(Optional) Age info

age

(Optional) Age time

Command Mode

- /exec

show mac address-table count

show mac address-table count [ static | dynamic | secure ] [ local ] [ { [ interface <interface-name> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan <id> ] + } | { [ interface1 <interface-name> | vni <vni-id> | peer-ip <peer-ipv4> ] + } ] [ __readonly__ TABLE-macaddtblcount [ <id-out> ] [ <count_str> ] [ <total_cnt> ] [ <dyn_cnt> ] [ <otv_cnt> ] [ <static_cnt> ] [ <secure_cnt> ] ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

count

Number of MAC entries

static

(Optional) Display Static Entries

dynamic

(Optional) Display Dynamic Entries

secure

(Optional) Display Secure Entries

local

(Optional) Display MAC Entries Learned Locally and Not on the Overlay/VXLAN

vlan

(Optional) VLAN

id

(Optional) VLAN ID

interface

(Optional) Interface

interface1

(Optional) Interface

interface-name

(Optional) Interface name

switch-id

(Optional) Remote Switch ID

swid

(Optional) Switch ID

sub-switch-id

(Optional) Remote Sub Switch ID

sswid

(Optional) Sub Switch ID

vni

(Optional) VXLAN Network Identifier

vni-id

(Optional) VXLAN Network Identifier

peer-ip

(Optional) VXLAN Peer IP Address

peer-ipv4

(Optional) VXLAN Peer IP Address

__readonly__

(Optional)

TABLE-macaddtblcount

(Optional) MAC Address Dynamic Count Table

id-out

(Optional) MAC Address Table VLAN ID

count_str

(Optional) Count info

total_cnt

(Optional) Total count

dyn_cnt

(Optional) Dynamic count

otv_cnt

(Optional) OTV count

static_cnt

(Optional) Static count

secure_cnt

(Optional) Secure count

Command Mode

- /exec

show mac address-table count es

show mac address-table count es { <es-id> | <es-id2> | all }

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

count

Number of MAC entries

es

EVPN Remote ESID

es-id

EE:EE:EE:EE:EE:EE:EE:EE:EE:EE ESID

es-id2

EEEE.EEEE.EEEE.EEEE.EEEE ESID

all

all ESIs

Command Mode

- /exec

show mac address-table learning-mode

show mac address-table learning-mode [ vlan <id> ] [ __readonly__ <learning_mode_str> <vlan_id> <mode_str> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

learning-mode

Learning Mode

vlan

(Optional) VLAN

id

(Optional) VLAN ID

__readonly__

(Optional)

learning_mode_str

(Optional) Learning Mode

vlan_id

(Optional) VLAN ID

mode_str

(Optional) Mode

Command Mode

- /exec

show mac address-table limit

show mac address-table limit [ __readonly__ <limit_str> <limit> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

limit

Configured/default mac limit

__readonly__

(Optional)

limit_str

(Optional) Limit info

limit

(Optional) Mac limit

Command Mode

- /exec

show mac address-table loop-detect

show mac address-table loop-detect

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

loop-detect

Display Action for Mac Loop Detection

Command Mode

- /exec

show mac address-table multicast

show mac address-table multicast [ vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ [ TABLE_vlan <vlan-id> [ TABLE_mac <mac-addr> <type> [ TABLE_oif <oifs> ] ] ] ]

Syntax Description

show

Show running system information

mac

MAC configuration commands

address-table

MAC Address Table

multicast

mcast mac OIF Static Entry

vlan

(Optional) VLAN

vlan

(Optional) VLAN

bridge-domain

(Optional) BD

bdid

(Optional) BD

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

TABLE_mac

(Optional)

mac-addr

(Optional)

type

(Optional)

TABLE_oif

(Optional)

oifs

(Optional)

Command Mode

- /exec

show mac address-table notification mac-move

show mac address-table notification mac-move [ __readonly__ TABLE_mac_notif <disp_mm_status> <disp_mm_triggers> <disp_macs_added> <disp_macs_moved> <disp_macs_removed> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

notification

Display Notification Information

mac-move

Mac Move Notification

__readonly__

(Optional) Read Only

TABLE_mac_notif

(Optional) Mac address notification table

disp_mm_status

(Optional) Mac Move Status

disp_mm_triggers

(Optional) # of triggers

disp_macs_added

(Optional) Number of MACs added since system bring up

disp_macs_removed

(Optional) Number of MACs removed since system bring up

disp_macs_moved

(Optional) Number of MACs moved since system bring up

Command Mode

- /exec

show mac vdc

show mac vdc <vdc_id> [ __readonly__ <vdc_id> <mac_address> ]

Syntax Description

show

show

mac

show management port mac address of the given vdc

vdc

show management port mac address of this vdc id

vdc_id

please enter vdc id

__readonly__

(Optional)

vdc_id

(Optional)

mac_address

(Optional)

Command Mode

- /exec

show macsec mka

show macsec mka [ summary ] [ __readonly__ { TABLE_mka_summary <ifname> <status> <cipher> <keyserver> <policy> <keychain> <fallback_keychain> } ]

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

summary

(Optional) Show MKA summary information

__readonly__

(Optional)

TABLE_mka_summary

(Optional)

ifname

(Optional) Interface

status

(Optional) MACSEC Session status

cipher

(Optional) Operational MACSEC Cipher-suite

keyserver

(Optional) Is this acting as interface key-server

policy

(Optional) MACSEC Policy applied to interface

keychain

(Optional) Keychain associated with interface

fallback_keychain

(Optional) Keychain associated with interface

Command Mode

- /exec

show macsec mka session

show macsec mka session [ interface <ifname> ] [ details ] [ __readonly__ [ TABLE_mka_session <ifname> <sci> <peers> <status> <keyserver><ca_auth_mode> ] [ <sessions> <active_sessions> <pending_sessions> ] [ TABLE_mka_session_details <ifname> <status> <sci> <ssci> <port_id> <ckn> <ca_auth_mode> <mi> <mn> <policy> <ks_prio> <keyserver> <cipher> <cipher_operational> <window> <conf_offset> <conf_offset_operational> <sak_status> <sak_an> <sak_ki> <sak_kn> <last_sak_rekey_time> <peer_count> [ TABLE_mka_peer_status <peer_mi> <rxsci> <icv_status> <last_rx_time> ] [ TABLE_mka_fallback <fallback_ckn> <fallback_mi> <fallback_mn> [ TABLE_mka_fallback_peer <fallback_peer_mi> <fallback_rxsci> <fallback_icv_status> <fallback_last_rx_time> ] ] ] ]

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

session

Show MKA session information

interface

(Optional) Specify interface

ifname

(Optional) Interface list

details

(Optional) Show MKA detailed information

__readonly__

(Optional)

TABLE_mka_session

(Optional)

ifname

(Optional) Interface

sci

(Optional) Interface local TxSCI

peers

(Optional) Number of Peers

status

(Optional) Macsec status of Interface

keyserver

(Optional) Interface keyserver

ca_auth_mode

(Optional) CA Authentication Mode

TABLE_mka_session_details

(Optional)

ifname

(Optional) Interface

status

(Optional) Session Status

sci

(Optional) Interface local TxSCI

ssci

(Optional) Interface local TxSSCI

port_id

(Optional) MKA Port Identifier

ckn

(Optional) CAK Name

mi

(Optional) Member Identifier

mn

(Optional) Message Number

policy

(Optional) MACSEC Policy

ks_prio

(Optional) Key-server Priority

cipher

(Optional) MKA Cipher Suite

cipher_operational

(Optional) MKA Cipher Suite Operational

window

(Optional) Replay Window Size

conf_offset

(Optional) Confidentiality Offset

conf_offset_operational

(Optional) Confidentiality Offset Operational

sak_status

(Optional) SAK Status

sak_an

(Optional) SAK AN

sak_ki

(Optional) SAK KI

sak_kn

(Optional) SAK KN

last_sak_rekey_time

(Optional) Last SAK rekey

peer_count

(Optional) Peer Count

TABLE_mka_peer_status

(Optional)

peer_mi

(Optional) Peer MI

rxsci

(Optional) RxSCI

icv_status

(Optional) Peer CAK

last_rx_time

(Optional) Latest Rx MKPDU

TABLE_mka_fallback

(Optional)

fallback_ckn

(Optional) Fallback CAK Name

fallback_mi

(Optional) Fallback Member Identifier

fallback_mn

(Optional) Fallback Message Number

TABLE_mka_fallback_peer

(Optional)

fallback_peer_mi

(Optional) Peer MI

fallback_rxsci

(Optional) RxSCI

fallback_icv_status

(Optional) Peer CAK

fallback_last_rx_time

(Optional) Latest Rx MKPDU

sessions

(Optional) Total number of Sessions

active_sessions

(Optional) Count of Active Sessions

pending_sessions

(Optional) Count of Pending Sessions

Command Mode

- /exec

show macsec mka statistics

show macsec mka statistics [ interface <ifname> ] [ __readonly__ [ TABLE_mka_intf_stats [ [ <ifname2> ] [ TABLE_ca_stats [ [ <ca_stat_ckn> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] ] ] [ TABLE_idb_stats [ [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <idb_stat_mkpdu_tx_success> ] [ <idb_stat_mkpdu_tx_fail> ] [ <idb_stat_mkpdu_tx_pkt_build_fail> ] [ <idb_stat_mkpdu_no_tx_on_intf_down> ] [ <idb_stat_mkpdu_no_rx_on_intf_down> ] [ <idb_stat_mkpdu_rx_ca_notfound> ] [ <idb_stat_mkpdu_rx_error> ] [ <idb_stat_mkpdu_rx_success> ] [ <idb_stat_mkpdu_failure_rx_integrity_check_error> ] [ <idb_stat_mkpdu_failure_invalid_peer_mn_error> ] [ <idb_stat_mkpdu_failure_nonrecent_peerlist_mn_error> ] [ <idb_stat_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_rx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <idb_stat_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_eapol_ethertype_mismatch_error> ] [ <idb_stat_sak_failure_sak_generate_error> ] [ <idb_stat_sak_failure_hash_generate_error> ] [ <idb_stat_sak_failure_sak_encryption_error> ] [ <idb_stat_sak_failure_sak_decryption_error> ] [ <idb_stat_sak_failure_ick_derivation_error> ] [ <idb_stat_sak_failure_kek_derivation_error> ] [ <idb_stat_sak_failure_invalid_macsec_capability_error> ] [ <idb_stat_macsec_failure_rx_sa_create_error> ] [ <idb_stat_macsec_failure_tx_sa_create_error> ] ] ] ] [ TABLE_mka_gbl_stats [ [ <session_secured> ] [ <session_deleted> ] [ <session_keepalive_timeout> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mka_error_session_failure_bring_up_error> ] [ <mka_error_sak_failure_sak_generate_error> ] [ <mka_error_sak_failure_hash_generate_error> ] [ <mka_error_sak_failure_sak_encryption_error> ] [ <mka_error_sak_failure_sak_decryption_error> ] [ <mka_error_sak_failure_sak_cipher_mismatch_error> ] [ <mka_error_ca_failure_ick_derivation_error> ] [ <mka_error_ca_failure_kek_derivation_error> ] [ <mka_error_ca_failure_invalid_macsec_capability_error> ] [ <mka_error_macsec_failure_rx_sa_create_error> ] [ <mka_error_macsec_failure_tx_sa_create_error> ] [ <mka_error_mkpdu_failure_mkpdu_tx_error> ] [ <mka_error_mkpdu_failure_mkpdu_rx_integrity_check_error> ] [ <mka_error_mkpdu_failure_mkpdu_invalid_peer_mn_error> ] [ <mka_error_mkpdu_failure_mkpdu_nonrecent_peerlist_mn_error> ] [ <mka_error_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_rx_not_set_error> ] [ <mka_error_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <mka_error_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <global_stats_mkpdu_rx_invalid_ckn> ] [ <global_stats_mkpdu_tx_pkt_build_fail> ] ] ] ] ]

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

statistics

Show MKA statistics

interface

(Optional) Specify interface

ifname

(Optional) Interface list

__readonly__

(Optional)

TABLE_mka_intf_stats

(Optional) MKA Interface statistics

TABLE_ca_stats

(Optional) CA Statistics

ca_stat_ckn

(Optional) CA Statistics CKN

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics Pairwise CAK Rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU Tx

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU Tx distributed SAK

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU Rx

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU Rx distributed SAK

TABLE_idb_stats

(Optional) IDB Statistics

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics pairwise CAK rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU Tx

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU Tx distributed SAK

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU Rx

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU Rx distributed SAK

idb_stat_mkpdu_tx_success

(Optional) IDB Statistics MKPDU Tx success

idb_stat_mkpdu_tx_fail

(Optional) IDB Statistics MKPDU Tx fail

idb_stat_mkpdu_tx_pkt_build_fail

(Optional) IDB Statistics MKPDU Tx packet build fail

idb_stat_mkpdu_no_tx_on_intf_down

(Optional) IDB Statistics MKPDU no Tx on interface down

idb_stat_mkpdu_no_rx_on_intf_down

(Optional) IDB Statistics MKPDU no Rx on interface down

idb_stat_mkpdu_rx_ca_notfound

(Optional) IDB Statistics MKPDU Rx CA not found

idb_stat_mkpdu_rx_error

(Optional) IDB Statistics MKPDU Rx error

idb_stat_mkpdu_rx_success

(Optional) IDB Statistics MKPDU Rx success

idb_stat_mkpdu_failure_rx_integrity_check_error

(Optional) IDB Statistics - MKPDU failure - Rx integrity check error

idb_stat_mkpdu_failure_invalid_peer_mn_error

(Optional) IDB Statistics - MKPDU failure - invalid peer MN error

idb_stat_mkpdu_failure_nonrecent_peerlist_mn_error

(Optional) IDB Statistics - MKPDU failure - non recent peerlist MN error

idb_stat_mkpdu_failure_sakuse_kn_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse KN mismatch error

idb_stat_mkpdu_failure_sakuse_rx_not_set_error

(Optional) IDB Statistics - MKPDU failure - SAKuse Rx not set error

idb_stat_mkpdu_failure_sakuse_key_mi_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse key MI mismatch error

idb_stat_mkpdu_failure_sakuse_an_not_in_use_error

(Optional) IDB Statistics - MKPDU failure - SAKuse AN not in use error

idb_stat_mkpdu_failure_sakuse_ks_rx_tx_not_set_error

(Optional) IDB Statistics - MKPDU failure - SAKuse KS Rx Tx not set error

idb_stat_mkpdu_failure_sakuse_eapol_ethertype_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse EAPOL ethertype mismatch error

idb_stat_sak_failure_sak_generate_error

(Optional) IDB Statistics - SAK failure - SAK generate error

idb_stat_sak_failure_hash_generate_error

(Optional) IDB Statistics - SAK failure - Hash generate error

idb_stat_sak_failure_sak_encryption_error

(Optional) IDB Statistics - SAK failure - SAK encryption error

idb_stat_sak_failure_sak_decryption_error

(Optional) IDB Statistics - SAK failure - SAK decryption error

idb_stat_sak_failure_ick_derivation_error

(Optional) IDB Statistics - SAK failure - ICK derivation error

idb_stat_sak_failure_kek_derivation_error

(Optional) IDB Statistics - SAK failure - KEK derivation error

idb_stat_sak_failure_invalid_macsec_capability_error

(Optional) IDB Statistics - SAK failure - invalid MACsec capability error

idb_stat_macsec_failure_rx_sa_create_error

(Optional) IDB Statistics - SAK failure - Rx SA create error

idb_stat_macsec_failure_tx_sa_create_error

(Optional) IDB Statistics - SAK failure - Tx SA create error

TABLE_mka_gbl_stats

(Optional) MKA Global Statistics

session_secured

(Optional) Session secured Events

session_deleted

(Optional) Session deleted Events

session_keepalive_timeout

(Optional) Session keepalive timeout Events

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics pairwise CAK rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU received

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU received distributed SAK

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU transmitted

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU transmitted distributed SAK

mka_error_session_failure_bring_up_error

(Optional) MKA Error - Session failure - Bring up error

mka_error_sak_failure_sak_generate_error

(Optional) MKA Error - SAK failure - SAK generate error

mka_error_sak_failure_hash_generate_error

(Optional) MKA Error - SAK failure - Hash generate error

mka_error_sak_failure_sak_encryption_error

(Optional) MKA Error - SAK failure - SAK encryption error

mka_error_sak_failure_sak_decryption_error

(Optional) MKA Error - SAK failure - SAK decryption error

mka_error_sak_failure_sak_cipher_mismatch_error

(Optional) MKA Error - SAK failure - SAK Cipher mismatch error

mka_error_ca_failure_ick_derivation_error

(Optional) MKA Error - CA failure - ICK derivation error

mka_error_ca_failure_kek_derivation_error

(Optional) MKA Error - CA failure - KEK derivation error

mka_error_ca_failure_invalid_macsec_capability_error

(Optional) MKA Error - CA failure - Invalid MACsec capability error

mka_error_macsec_failure_rx_sa_create_error

(Optional) MKA Error - MACsec failure - Rx SA create error

mka_error_macsec_failure_tx_sa_create_error

(Optional) MKA Error - MACsec failure - Tx SA create error

mka_error_mkpdu_failure_mkpdu_tx_error

(Optional) MKA Error - MKPDU failure - MKPDU Tx error

mka_error_mkpdu_failure_mkpdu_rx_integrity_check_error

(Optional) MKA Error - MKPDU failure - MKPDU Rx integrity check error

mka_error_mkpdu_failure_mkpdu_invalid_peer_mn_error

(Optional) MKA Error - MKPDU failure - invalid peer MN error

mka_error_mkpdu_failure_mkpdu_nonrecent_peerlist_mn_error

(Optional) MKA Error - MKPDU failure - non recent peerlist MN error

mka_error_mkpdu_failure_sakuse_kn_mismatch_error

(Optional) MKA Error - MKPDU failure - SAKuse KN mismatch error

mka_error_mkpdu_failure_sakuse_rx_not_set_error

(Optional) MKA Error - MKPDU failure - SAKuse Rx not set error

mka_error_mkpdu_failure_sakuse_key_mi_mismatch_error

(Optional) MKA Error - MKPDU failure - SAKuse key MI mismatch error

mka_error_mkpdu_failure_sakuse_an_not_in_use_error

(Optional) MKA Error - MKPDU failure - SAKuse AN not in use error

mka_error_mkpdu_failure_sakuse_ks_rx_tx_not_set_error

(Optional) MKA Error - MKPDU failure - SAKuse KS Rx Tx not set error

global_stats_mkpdu_rx_invalid_ckn

(Optional) Global Statistics MKPDU received invalid CKN

global_stats_mkpdu_tx_pkt_build_fail

(Optional) Global Statistics Transmit Pkt build fail

ifname2

(Optional) MACSEC Interface Name

Command Mode

- /exec

show macsec policy

show macsec policy [ <policy_name> ] [ __readonly__ { TABLE_macsec_policy <name> <cipher_suite> <keyserver_priority> <window_size> <conf_offset> <security_policy> <sak-expiry-time> } ]

Syntax Description

show

Show running system information

macsec

Show MACSEC policy information

policy

Show MACSEC policy information

policy_name

(Optional) Name of MACSEC Policy

__readonly__

(Optional)

TABLE_macsec_policy

(Optional)

name

(Optional) MACSEC Policy Name

cipher_suite

(Optional) Cipher Suite

keyserver_priority

(Optional) KeyServer Priority

window_size

(Optional) Window Size

conf_offset

(Optional) Confidentiality Offset

security_policy

(Optional) Security Policy

sak-expiry-time

(Optional) SAK expiry on time interval

Command Mode

- /exec

show macsec secy statistics

show macsec secy statistics [ interface <ifname> ] [ __readonly__ TABLE_statistics <ifname2> [ <in_pkts_unicast_uncontrolled> ] [ <in_pkts_multicast_uncontrolled> ] [ <in_pkts_broadcast_uncontrolled> ] [ <in_rx_drop_pkts_uncontrolled> ] [ <in_rx_err_pkts_uncontrolled> ] [ <in_pkts_unicast_controlled> ] [ <in_pkts_multicast_controlled> ] [ <in_pkts_broadcast_controlled> ] [ <in_rx_drop_pkts_controlled> ] [ <in_rx_err_pkts_controlled> ] [ <in_octets_uncontrolled> ] [ <in_octets_controlled> ] [ <input_rate_uncontrolled_pps> ] [ <input_rate_uncontrolled_bps> ] [ <input_rate_controlled_pps> ] [ <input_rate_controlled_bps> ] [ <out_pkts_unicast_uncontrolled> ] [ <out_pkts_multicast_uncontrolled> ] [ <out_pkts_broadcast_uncontrolled> ] [ <out_rx_drop_pkts_uncontrolled> ] [ <out_rx_err_pkts_uncontrolled> ] [ <out_pkts_unicast_controlled> ] [ <out_pkts_multicast_controlled> ] [ <out_pkts_broadcast_controlled> ] [ <out_rx_drop_pkts_controlled> ] [ <out_rx_err_pkts_controlled> ] [ <out_octets_uncontrolled> ] [ <out_octets_controlled> ] [ <out_octets_common> ] [ <output_rate_uncontrolled_pps> ] [ <output_rate_uncontrolled_bps> ] [ <output_rate_controlled_pps> ] [ <output_rate_controlled_bps> ] [ <in_pkts_transform_error> ] [ <in_pkts_control> ] [ <in_pkts_untagged> ] [ <in_pkts_no_tag> ] [ <in_pkts_badtag> ] [ <in_pkts_no_sci> ] [ <in_pkts_unknown_sci> ] [ <in_pkts_tagged_ctrl> ] [ <out_pkts_transform_error> ] [ <out_pkts_control> ] [ <out_pkts_untagged> ] [ TABLE_rx_sa_an <rx_sa_an> [ <in_pkts_unchecked> ] [ <in_pkts_delayed> ] [ <in_pkts_late> ] [ <in_pkts_ok> ] [ <in_pkts_invalid> ] [ <in_pkts_not_valid> ] [ <in_pkts_not_using_sa> ] [ <in_pkts_unused_sa> ] [ <in_octets_decrypted> ] [ <in_octets_validated> ] ] [ TABLE_tx_sa_an <tx_sa_an> [ <out_pkts_encrypted_protected> ] [ <out_pkts_too_long> ] [ <out_pkts_sa_not_inuse> ] [ <out_octets_encrypted_protected> ] ] ]

Syntax Description

show

Show running system information

macsec

Show MACSEC information

secy

Show MACSEC secy entity information

statistics

Show MACSEC secy statistics

interface

(Optional) Specify interface

ifname

(Optional) Interface list

__readonly__

(Optional)

TABLE_statistics

(Optional) MACsec secy statistics

in_pkts_unicast_uncontrolled

(Optional) In Pkts Unicast Uncontrolled

in_pkts_multicast_uncontrolled

(Optional) In Pkts Multicast Uncontrolled

in_pkts_broadcast_uncontrolled

(Optional) In Pkts Broadcast Uncontrolled

in_rx_drop_pkts_uncontrolled

(Optional) In Rx Drop Pkts Uncontrolled

in_rx_err_pkts_uncontrolled

(Optional) In Rx Err Pkts Uncontrolled

in_pkts_unicast_controlled

(Optional) In Pkts Unicast Controlled

in_pkts_multicast_controlled

(Optional) In Pkts Multicast Controlled

in_pkts_broadcast_controlled

(Optional) In Pkts Broadcast Controlled

in_rx_drop_pkts_controlled

(Optional) In Rx Drop Pkts Controlled

in_rx_err_pkts_controlled

(Optional) In Rx Err Pkts Controlled

in_octets_uncontrolled

(Optional) In Octets Uncontrolled

in_octets_controlled

(Optional) In Octets Controlled

input_rate_uncontrolled_bps

(Optional) Input Rate Uncontrolled BPS

input_rate_uncontrolled_pps

(Optional) Input Rate Uncontrolled PPS

input_rate_controlled_bps

(Optional) Input Rate Controlled BPS

input_rate_controlled_pps

(Optional) Input Rate Controlled PPS

out_pkts_unicast_uncontrolled

(Optional) Out Pkts Unicast Uncontrolled

out_pkts_multicast_uncontrolled

(Optional) Out Pkts Multicast Uncontrolled

out_pkts_broadcast_uncontrolled

(Optional) Out Pkts Broadcast Uncontrolled

out_rx_drop_pkts_uncontrolled

(Optional) Out Rx Drop Pkts Uncontrolled

out_rx_err_pkts_uncontrolled

(Optional) Out Rx Err Pkts Uncontrolled

out_pkts_unicast_controlled

(Optional) Out Pkts Unicast Controlled

out_pkts_multicast_controlled

(Optional) Out Pkts Multicast Controlled

out_pkts_broadcast_controlled

(Optional) Out Pkts Broadcast Controlled

out_rx_drop_pkts_controlled

(Optional) Out Rx Drop Pkts Controlled

out_rx_err_pkts_controlled

(Optional) Out Rx Err Pkts Controlled

out_octets_uncontrolled

(Optional) Out Octets Uncontrolled

out_octets_controlled

(Optional) Out Ocets Controlled

out_octets_common

(Optional) Out Octets Common

output_rate_uncontrolled_bps

(Optional) Output Rate Uncontrolled BPS

output_rate_uncontrolled_pps

(Optional) Output Rate Uncontrolled PPS

output_rate_controlled_bps

(Optional) Output Rate Controlled BPS

output_rate_controlled_pps

(Optional) Output Rate Controlled PPS

in_pkts_transform_error

(Optional) In Pkts Transform Error

in_pkts_control

(Optional) In Pkts Control

in_pkts_untagged

(Optional) In Pkts Untagged

in_pkts_no_tag

(Optional) In Pkts No Tag

in_pkts_badtag

(Optional) In Pkts Bad Tag

in_pkts_no_sci

(Optional) In Pkts No SCI

in_pkts_unknown_sci

(Optional) In Pkts Unknown SCI

in_pkts_tagged_ctrl

(Optional) In Pkts Tagged Control

out_pkts_transform_error

(Optional) Out Pkts Transform Error

out_pkts_control

(Optional) Out Pkts Control

out_pkts_untagged

(Optional) Out Pkts Untagged

TABLE_rx_sa_an

(Optional) MACsec secy rx_sa_an statistics

rx_sa_an

(Optional) Rx SA AN

in_pkts_unchecked

(Optional) In Pkts Unchecked

in_pkts_delayed

(Optional) In Pkts Delayed

in_pkts_late

(Optional) In Pkts Late

in_pkts_ok

(Optional) In Pkts OK

in_pkts_invalid

(Optional) In Pkts Invalid

in_pkts_not_valid

(Optional) In Pkts not Valid

in_pkts_not_using_sa

(Optional) In Pkts not using SA

in_pkts_unused_sa

(Optional) In Pkts Unused SA

in_octets_decrypted

(Optional) In Octets Decrypted

in_octets_validated

(Optional) In Octets Validated

TABLE_tx_sa_an

(Optional) MACsec secy tx_sa_an statistics

tx_sa_an

(Optional) Tx SA AN

out_pkts_encrypted_protected

(Optional) Out Pkts Encrypted Protected

out_pkts_too_long

(Optional) Out Pkts too Long

out_pkts_sa_not_inuse

(Optional) Out Pkts SA not in use

out_octets_encrypted_protected

(Optional) Out octets Encrypted Protected

ifname2

(Optional) MACSEC Interface Name

Command Mode

- /exec

show maintenance maint-delay

show maintenance maint-delay [ __readonly__ <delay> ]

Syntax Description

show

Show running system information

maintenance

maintenance

maint-delay

maintenance mode CLI release delay value

__readonly__

(Optional)

delay

(Optional) delay value in seconds

Command Mode

- /exec

show maintenance on-reload reset-reasons

show maintenance on-reload reset-reasons [ __readonly__ [ TABLE_reset_reason <reset_reason> ] <rr_bitmap> ]

Syntax Description

show

Show running system information

maintenance

maintenance

on-reload

on reload maintenance mode configuration

reset-reasons

system reset reasons

__readonly__

(Optional)

TABLE_reset_reason

(Optional)

rr_bitmap

(Optional) reset reason bitmap

reset_reason

(Optional) system reset reason

Command Mode

- /exec

show maintenance profile

show maintenance profile [ <mode> ] [ __readonly__ TABLE_profile <name> [ TABLE_cfg <cfg> ] ]

Syntax Description

show

Show running system information

maintenance

maintenance

profile

maintenance profile

mode

(Optional)

__readonly__

(Optional)

TABLE_profile

(Optional)

name

(Optional) profile name

TABLE_cfg

(Optional)

cfg

(Optional) profile config

Command Mode

- /exec

show maintenance snapshot-delay

show maintenance snapshot-delay [ __readonly__ <delay> ]

Syntax Description

show

Show running system information

maintenance

maintenance

snapshot-delay

after_maintenance snapshot delay value

__readonly__

(Optional)

delay

(Optional) delay value in seconds

Command Mode

- /exec

show maintenance timeout

show maintenance timeout [ __readonly__ <timeout> ]

Syntax Description

show

Show running system information

maintenance

maintenance

timeout

timeout value

__readonly__

(Optional)

timeout

(Optional) timeout value

Command Mode

- /exec

show mcectest

show mcectest <arg> [ __readonly__ <arg_resp> ]

Syntax Description

mcectest

Show MCECTEST related information

arg

Enter your arguments

__readonly__

(Optional) Read Only

arg_resp

(Optional) Response

Command Mode

- /exec

show mcectest mcec interface

show mcectest mcec interface <if> [ use-cache ] [ vdc-id ] [ _readonly_ <mcec_mode> ]

Syntax Description

mcectest

Show MCECTEST related information

mcec

Show MCECM information

if

use-cache

(Optional) Use cache

vdc-id

(Optional) VDC ID

_readonly_

(Optional)

mcec_mode

(Optional) MCEC port mode

Command Mode

- /exec

show mgmt-policy

show mgmt-policy { <policy-name> | all } [ __readonly__ { TABLE_mgmt_policy { <mgt-pol-name> [ <source-ip> <source-mask> ] [ <source-ip6> ] [ <src-port-rangestart> <src-port-range-end> ] [ <source-port> ] [ <dst-port-rangestart> <dest-port-range-end> ] [ <dest-port> ] } } ]

Syntax Description

show

Show running system information

mgmt-policy

PM Management policy

policy-name

Name of the policy

all

Show all policies

__readonly__

(Optional)

TABLE_mgmt_policy

(Optional) Management policy Details

mgt-pol-name

(Optional)

source-ip

(Optional)

source-mask

(Optional)

src-port-rangestart

(Optional)

src-port-range-end

(Optional)

source-port

(Optional)

dst-port-rangestart

(Optional)

dest-port-range-end

(Optional)

dest-port

(Optional)

Command Mode

- /exec

show module

show module [ { <module> } | { <s0> [ <santa-cruz-range> ] } | { fabric [ <module> ] } ] [ __readonly__ { TABLE_modinfo <modinf> <ports> <modtype> <model> <status> } [ { TABLE_modpwrinfo <modpwr> <pwrstat> <reason> } ] { TABLE_modwwninfo <modwwn> <sw> <hw> <slottype> } [ { TABLE_modapplinfo <modappl> <desc> <applver> } ] { TABLE_modmacinfo <modmac> <mac> <serialnum> } { TABLE_moddiaginfo <mod> <diagstatus> } [ { TABLE_xbarinfo <xbarinf> <xbarports> <xbartype> <xbarmodel> <xbarstatus> } ] [ { TABLE_xbarpwrinfo <xbarpwr> <xbarpwrstat> <xbarreason> } ] [ { TABLE_xbarwwninfo <xbarwwn> <xbarsw> <xbarhw> <xbarwwnstr> } ] [ { TABLE_xbarmacinfo <xbarmac> <xbarmacaddr> <xbarserialnum> } ] ]

Syntax Description

show

Show running system information

module

Show module information

module

(Optional) Enter module number

s0

(Optional) Show xbar information

santa-cruz-range

(Optional) please enter the xbar number

fabric

(Optional) Show fabric information

__readonly__

(Optional)

TABLE_modinfo

(Optional) Show Module info

modinf

(Optional) Module

ports

(Optional) Num Ports

modtype

(Optional) Module Type

model

(Optional) Model

status

(Optional) Status

TABLE_modpwrinfo

(Optional) Mod Pwr Info

modpwr

(Optional) Module

pwrstat

(Optional) Power Status

reason

(Optional) Reason

TABLE_modwwninfo

(Optional) Mod WWN Info

modwwn

(Optional) Module

sw

(Optional) SW Ver

hw

(Optional) HW Ver

slottype

(Optional) Slot

TABLE_modapplinfo

(Optional) Mod Appl image info

modappl

(Optional) Module

desc

(Optional) Image desc

applver

(Optional) Version

TABLE_modmacinfo

(Optional) Mod MAC Info

modmac

(Optional) Module

mac

(Optional) MAC

serialnum

(Optional) Serial Num

TABLE_moddiaginfo

(Optional) Mod diag info

mod

(Optional) Module

diagstatus

(Optional) Diag status

TABLE_xbarinfo

(Optional) Show xbar info

xbarinf

(Optional) Module

xbarports

(Optional) Num Ports

xbartype

(Optional) Module Type

xbarmodel

(Optional) Model

xbarstatus

(Optional) Status

TABLE_xbarpwrinfo

(Optional) Xbar Pwr Info

xbarpwr

(Optional) Module

xbarpwrstat

(Optional) Power Status

xbarreason

(Optional) Reason

TABLE_xbarwwninfo

(Optional) Xbar WWN Info

xbarwwn

(Optional) Module

xbarsw

(Optional) SW Ver

xbarhw

(Optional) HW Ver

xbarwwnstr

(Optional) WWN

TABLE_xbarmacinfo

(Optional) Xbar MAC Info

xbarmac

(Optional) Module

xbarmacaddr

(Optional) MAC

xbarserialnum

(Optional) Serial Num

Command Mode

- /exec

show module bandwidth-fairness

show module <module> bandwidth-fairness [ __readonly__ { TABLE_fairness <statement> } ]

Syntax Description

show

Show running system information

module

Show module information

module

Enter module number

bandwidth-fairness

Show bandwidth fairness status

__readonly__

(Optional)

TABLE_fairness

(Optional)

statement

(Optional)

Command Mode

- /exec

show module supported

show module supported

Syntax Description

show

Show running system information

module

Show module information

supported

Show supported sw-card-types for this chassis

Command Mode

- /exec

show module uptime

show module uptime [ __readonly__ { TABLE_uptimeinf <slot> <starttime> <daysup> <hoursup> <minutesup> <secondsup> } ]

Syntax Description

show

Show running system information

module

Show module information

uptime

Show how long the module has been up and running

__readonly__

(Optional)

TABLE_uptimeinf

(Optional) Show uptime info

slot

(Optional) Slot

starttime

(Optional) Start Time

daysup

(Optional) Days Up

hoursup

(Optional) Hours Up

minutesup

(Optional) Minutes Up

secondsup

(Optional) Seconds Up

Command Mode

- /exec

show monitor

show monitor [ __readonly__ TABLE_session <session_number> <state> <state_reason> <description> ]

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

__readonly__

(Optional) Read only

TABLE_session

(Optional) show monitor

session_number

(Optional) session id

state

(Optional) State

state_reason

(Optional) State reason

description

(Optional) Session Description

Command Mode

- /exec

show monitor session

show monitor session { all | <session_number> | warp | range <session_range> } [ brief ] [ __readonly__ [ TABLE_session <session_number> [ <description> ] [ <type> ] [ <version> ] [ <state> ] [ <state_reason> ] [ <err_desc> ] [ <flow_id> ] [ <switch_id> ] [ <erspan_granularity> ] [ <vrf_name> ] [ <acl_name> ] [ <erspan_ttl> ] [ <erspan_dscp> ] [ <header_type> ] [ <span_mtu> ] [ <span_sampling> ] [ <ip_filter> ] + [ <dst_ip> ] [ <origin_ip> ] [ <src_ip> ] [ <control_pkt_filter> ] [ TABLE_sources_rx [ <sources_rx> ] ] [ TABLE_sources_tx [ <sources_tx> ] ] [ TABLE_sources_both [ <sources_both> ] ] [ <source_vlans_rx> ] [ <source_vlans_tx> ] [ <source_vlans_both> ] [ <source_vsans_rx> ] [ <tree-id> <switchid> ] + [ <filter_vlans> ] [ <destinations> ] + [ <acl_destinations> ] + [ <rate_limit_cap> ] + [ <mtu_capability> ] + [ <sampling_capability> ] + [ <mcbe> ] + [ <l3_egress_span> ] + [ <erspan_acl> ] + [ <erspan_v3_cap> ] + [ <erspan_v2_cap> ] + [ <erspan_gran_cap> ] + [ <fex_ingress_intf> ] + [ <sources_rx_2> ] + [ <marker_time_intv> ] [ <marker_pkt_count> ] [ <marker_pkt_fail> ] [ <erspan_egress_if> ] ] ]

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

session

Show session info

all

All sessions

session_number

warp

warp session

range

Specify a range

session_range

brief

(Optional) Brief information

__readonly__

(Optional) Read only

TABLE_session

(Optional) show monitor

session_number

(Optional) session number

description

(Optional) Session Description

type

(Optional) Session type

version

(Optional) Erspan source version: v2/v3

state

(Optional) State

state_reason

(Optional) State reason

err_desc

(Optional) Error Description

flow_id

(Optional) erspan-id

switch_id

(Optional) erspan_switch-id

erspan_granularity

(Optional) ERSPAN Type III Granularity

vrf_name

(Optional) ERSPAN session VRF

acl_name

(Optional) ERSPAN session ACL

erspan_ttl

(Optional) ERSPAN TTL Value

erspan_dscp

(Optional) ERSPAN DSCP Value

header_type

(Optional) ERSPAN Header Type

span_mtu

(Optional) SPAN MTU value

span_sampling

(Optional) SPAN sampling range

ip_filter

(Optional) IP filter value

dst_ip

(Optional) ERSPAN destination IP

origin_ip

(Optional) ERSPAN origin IP at source router

src_ip

(Optional) ERSPAN source IP

control_pkt_filter

(Optional) Control packet filter value

TABLE_sources_rx

(Optional) ingress intf table

sources_rx

(Optional) List of ingress sources

TABLE_sources_tx

(Optional) egress intf table

sources_tx

(Optional) List of egress sources

TABLE_sources_both

(Optional) bi-direction intf table

sources_both

(Optional) List of sources in both directions

source_vlans_rx

(Optional) Source ingress vlan

source_vsans_rx

(Optional) Source ingress vsan

source_vlans_tx

(Optional) Source egress vlan

source_vlans_both

(Optional) Source vlans in both directions

tree-id

(Optional) proxy layer2 gateway source tree-id

switchid

(Optional) proxy layer2 gateway source switchid

filter_vlans

(Optional) Filter vlans

destinations

(Optional) List of destinations

acl_destinations

(Optional) List of interfaces that wont work for acl capture

rate_limit_cap

(Optional) List of modules that support Rate Limit

mtu_capability

(Optional) List of modules that support MTU

sampling_capability

(Optional) List of modules that support Sampling

mcbe

(Optional) List all modules that support multicast best effort

l3_egress_span

(Optional) List of modules that support L3 Multicast Egress SPAN

erspan_acl

(Optional) List of modules that support ERSPAN ACL filtering

erspan_v3_cap

(Optional) List of modules that support erspan version3

erspan_v2_cap

(Optional) List of modules that support erspan version2

erspan_gran_cap

(Optional) List of modules that support the granularity set

fex_ingress_intf

(Optional) List of fex interfaces that wont work for ingress span

erspan_egress_if

(Optional) Egress interface for ERSPAN SRC session

sources_rx_2

(Optional) List of ingress sources

marker_time_intv

(Optional) Marker packet interval

marker_pkt_count

(Optional) Marker packet count

marker_pkt_fail

(Optional) Marker packet fail count

Command Mode

- /exec

show mpls forwarding statistics

show mpls forwarding statistics [ interface { <interface> | all } ] [ __readonly__ { TABLE_mpls_stats [ <intf_name> ] <mpls_packets_sent> <mpls_bytes_sent> <mpls_packets_received> <mpls_bytes_received> <mpls_packets_forwarded> <mpls_bytes_forwarded> <mpls_packets_originated> <mpls_bytes_originated> <mpls_packets_consumed> <mpls_bytes_consumed> <mpls_packets_input_dropped> <mpls_bytes_input_dropped> <mpls_packets_output_dropped> <mpls_bytes_output_dropped> } ]

Syntax Description

show

Show running system information

mpls

MPLS information

forwarding

Display MPLS software forwarded

statistics

Traffic statistics

interface

(Optional) Interface specific information

interface

(Optional) Interface chosen to display statistics

all

(Optional) All interfaces

__readonly__

(Optional)

TABLE_mpls_stats

(Optional) MPLS forwarding statistics

intf_name

(Optional) Interace name

mpls_packets_sent

(Optional) mpls packet sent

mpls_bytes_sent

(Optional) mpls bytes sent

mpls_packets_received

(Optional) mpls packet received

mpls_bytes_received

(Optional) mpls bytes received

mpls_packets_forwarded

(Optional) mpls packet forwarded

mpls_bytes_forwarded

(Optional) mpls bytes forwarded

mpls_packets_originated

(Optional) mpls packet originated

mpls_bytes_originated

(Optional) mpls bytes originated

mpls_packets_consumed

(Optional) mpls packet consumed

mpls_bytes_consumed

(Optional) mpls bytes consumed

mpls_packets_input_dropped

(Optional) mpls packet input dropped

mpls_bytes_input_dropped

(Optional) mpls bytes input dropped

mpls_packets_output_dropped

(Optional) mpls packet output dropped

mpls_bytes_output_dropped

(Optional) mpls bytes output dropped

Command Mode

- /exec

show mpls interfaces

show mpls interfaces [ __readonly__ TABLE_mpls_interface <intf> <oper> ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Display MPLS Interfaces

__readonly__

(Optional)

TABLE_mpls_interface

(Optional)

intf

(Optional)

oper

(Optional)

Command Mode

- /exec

show mpls interfaces detail

show mpls interfaces detail [ __readonly__ TABLE_mpls_interface_det <intf> <client_name> <oper_str> <ls_id> <mpls_sublayer_name> <mpls_sublayer_id> ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Interfaces

detail

Detail

__readonly__

(Optional)

TABLE_mpls_interface_det

(Optional)

intf

(Optional)

client_name

(Optional)

oper_str

(Optional)

ls_id

(Optional)

mpls_sublayer_name

(Optional)

mpls_sublayer_id

(Optional)

Command Mode

- /exec

show mpls interfaces statistics

show mpls interfaces <ifname> statistics [ __readonly__ TABLE_mpls_interface_stats <intf> <enabled> [ <pkts_in> ] [ <bytes_in> ] [ <pkts_out> ] [ <bytes_out> ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Interfaces

ifname

Interface Name

statistics

statistics

__readonly__

(Optional)

TABLE_mpls_interface_stats

(Optional)

intf

(Optional)

enabled

(Optional)

pkts_in

(Optional)

bytes_in

(Optional)

pkts_out

(Optional)

bytes_out

(Optional)

Command Mode

- /exec

show mpls ip bindings

show mpls ip bindings [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ generic ] [ { <prefix> { <mask> | <mask-length> } | <prefix-mask> } [ longer-prefix ] ] [ neighbor <addr> | local ] [ [ local-label <local-label> [ local-to <local-label-max> ] ] | [ remote-label <remote-label> [ remote-to <remote-label-max> ] ] ] [ advertisement-prefix-list | detail ] [ __readonly__ { TABLE_bnd [ <ldp_ctx> ] [ <llaf> ] [ { TABLE_bnd_acl_list <oldstyle> <prefix_acl> <peer_acl> } ] [ { TABLE_bnd_rec <lib_addr> <lib_mask> [ <lcl_bnd_rev> ] [ <no_route> ] [ <chkpt> ] [ <local_label> ] [ <withdraw> ] [ { TABLE_bnd_peer_list <peer_ident> } ] [ <remote_label> ] [ <remote_lsr> ] [ <rem_lbl_in_use> ] [ <stale_gr> ] [ <advert_acl_pending> ] [ <peer_acl> ] [ <prefix_acl> ] } ] } ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ip

MPLS IP information

bindings

Show the MPLS IP Label Information Base (LIB)

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display LIB information in all VRFs

generic

(Optional) Display generic labels

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

mask-length

(Optional) Mask length

prefix-mask

(Optional) Destination prefix/mask

longer-prefix

(Optional) Include longer matches

neighbor

(Optional) Display labels from LDP neighbor

addr

(Optional) IP adjacency address

local

(Optional) Display only locally assigned labels

local-label

(Optional) Match locally assigned label values

local-label

(Optional) Locally assigned label value

local-to

(Optional) Label range

local-label-max

(Optional) Locally assigned label value

remote-label

(Optional) Match remotely assigned label values

remote-label

(Optional) Remotely assigned label value

remote-to

(Optional) Label range

remote-label-max

(Optional) Remotely assigned label value

advertisement-prefix-list

(Optional) Show advertisement prefix lists

detail

(Optional) Show detailed information

__readonly__

(Optional) Read Only

TABLE_bnd

(Optional) Show bindings or tib summary for a vrf

ldp_ctx

(Optional) LDP context

llaf

(Optional) Local label filtering spec

TABLE_bnd_acl_list

(Optional) Show advertisement access lists for default vrf

oldstyle

(Optional) Oldstyle assignment of prefix acls to entries

prefix_acl

(Optional) Prefix acl

peer_acl

(Optional) Peer acl

TABLE_bnd_rec

(Optional) Show bindings in a vrf

lib_addr

(Optional) LIB entry IP address

lib_mask

(Optional) LIB entry mask

lcl_bnd_rev

(Optional) Local binding revision for lib entry

no_route

(Optional) Displays if no route present for lib entry

chkpt

(Optional) Checkpoint state for lib entry

local_label

(Optional) Local label

withdraw

(Optional) Displays if label withdrawn or label withdraw sent

remote_lsr

(Optional) Remote binding label switched route for lib entry

remote_label

(Optional) Remote label for lib entry

rem_lbl_in_use

(Optional) Displays if out label is in use

stale_gr

(Optional) Displays if stale GR binding for lib entry

advert_acl_pending

(Optional) Displays if advert acl action pending for lib entry

peer_acl

(Optional) Advertisement acl: Peer acl name for lib entry

prefix_acl

(Optional) Advertisement acl: Prefix acl name for lib entry

TABLE_bnd_peer_list

(Optional) Show list of peers to which local label has been advertised

peer_ident

(Optional) Peer to which local label has been advertised

Command Mode

- /exec

show mpls ip bindings summary

show mpls ip bindings summary [ __readonly__ { TABLE_bnd [ <total_prefixes> ] [ <assigned_bindings> ] [ <local_bindings> ] [ <rem_bindings> ] [ <total_rt_info> ] [ <current_prev_lbl_entries> ] [ <total_prev_lbl_entries> ] [ <current_prev_lbl_queues> ] [ <total_prev_lbl_queues> ] } ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ip

MPLS IP information

bindings

Show the MPLS IP Label Information Base (LIB)

summary

Show summary information

__readonly__

(Optional) Read Only

TABLE_bnd

(Optional) Show bindings or tib summary for a vrf

total_prefixes

(Optional) Total number of prefixes

assigned_bindings

(Optional) Total number of assigned bindings

total_rt_info

(Optional) Total tib route info alloced

local_bindings

(Optional) Total number of locally assigned bindings

rem_bindings

(Optional) Total number of remote bindings

current_prev_lbl_entries

(Optional) Current number of previous tib remote label entries allocated

total_prev_lbl_entries

(Optional) Total number of previous tib remote label entries allocated

current_prev_lbl_queues

(Optional) Current number of previous tib remote label queues allocated

total_prev_lbl_queues

(Optional) Total number of previous tib remote label queues allocated

Command Mode

- /exec

show mpls ip ttl

show mpls ip ttl [ __readonly__ TABLE_mpls_ip_ttl <prop_or_exp> [ <forwarded> ] [ <local> ] [ <exp_count> ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ip

Display IP information

ttl

TTL related information

__readonly__

(Optional)

TABLE_mpls_ip_ttl

(Optional)

prop_or_exp

(Optional)

forwarded

(Optional)

local

(Optional)

exp_count

(Optional)

Command Mode

- /exec

show mpls label range

show mpls label range [ __readonly__ <dynamic-min> <dynamic-max> [ <static-min> <static-max> ] [ <srgb-min> <srgb-max> ] ]

Syntax Description

show

Show running system information

mpls

MPLS configuration commands

label

Label properties

range

Label range

__readonly__

(Optional)

dynamic-min

(Optional)

dynamic-max

(Optional)

static-min

(Optional)

static-max

(Optional)

srgb-min

(Optional)

srgb-max

(Optional)

Command Mode

- /exec

show mpls label statistics

show mpls label statistics <label>

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

label

Show a specific label statistics

statistics

Statistics for the label

label

Label

Command Mode

- /exec

show mpls oam echo statistics

show mpls oam echo statistics [ summary ] [ __readonly__ <rq_sent> <rq_timeout> <rq_unsent> <rq_rcvd> <rx_sent> <rx_unsent> <rx_rcvd> <rc_zero> <rc_one> <rc_two> <rc_three> <rc_four> <rc_five> <rc_six> <rc_seven> <rc_eight> <rc_nine> <rc_ten> <rc_eleven> <rc_twelve> <rc_thirteen> <rc_fourteen> <summary_flag> ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

oam

Display OAM information

echo

Echo request information

statistics

Detailed Echo packet statistics

summary

(Optional) Echo packet statistics summary

__readonly__

(Optional)

rq_sent

(Optional) Requests sent

rq_timeout

(Optional) Requests timeout

rq_unsent

(Optional) Requests unsent

rq_rcvd

(Optional) Requests received

rx_sent

(Optional) Replies sent

rx_unsent

(Optional) Replies unsent

rx_rcvd

(Optional) Replies received

rc_zero

(Optional) Return code zero

rc_one

(Optional) Return code one

rc_two

(Optional) Return code two

rc_three

(Optional) Return code three

rc_four

(Optional) Return code four

rc_five

(Optional) Return code five

rc_six

(Optional) Return code six

rc_seven

(Optional) Return code seven

rc_eight

(Optional) Return code eight

rc_nine

(Optional) Return code nine

rc_ten

(Optional) Return code ten

rc_eleven

(Optional) Return code eleven

rc_twelve

(Optional) Return code twelve

rc_thirteen

(Optional) Return code thirteen

rc_fourteen

(Optional) Return code fourteen

summary_flag

(Optional) Summary flag

Command Mode

- /exec

show mpls static binding

show mpls static binding [ ipv4 ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ <prefix> { <mask> | <mask-length> } | <prefix-mask> ] [ local | remote ] [ nexthop <addr> ] [ __readonly__ { TABLE_slb [ <slb_prefix> <slb_mask> ] <slb_vrf> <slb_inlabel> [ { TABLE_slb_outlbl_list <slb_nhop> <slb_outlabel> } ] } ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Show MPLS static information

binding

Show static label bindings

ipv4

(Optional) Show ipv4 static label bindings

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

mask-length

(Optional) Mask length

prefix-mask

(Optional) Destination prefix/mask

local

(Optional) Incoming (local) static label bindings

remote

(Optional) Outgoing (remote) static label bindings

nexthop

(Optional) Next hop address

addr

(Optional) Next hop address

__readonly__

(Optional) Read Only

TABLE_slb

(Optional) Show static label bindings for a given prefix

slb_prefix

(Optional) Prefix

slb_mask

(Optional) Mask bits

slb_vrf

(Optional) VRF name for prefix

slb_inlabel

(Optional) Incoming label for prefix

TABLE_slb_outlbl_list

(Optional) Show static outgoing labels for prefix

slb_nhop

(Optional) Next-hop address

slb_outlabel

(Optional) Outgoing label for next-hop address

Command Mode

- /exec

show mpls static binding

show mpls static binding [ vrf { <vrf-name> | <vrf-known-name> } ] { { ipv4 [ <prefix> { <mask> | <mask-length> } | <prefix-mask> ] [ local | remote ] [ nexthop <addr> ] [ inconsistency ] [ lsp <slb_name> ] } | { ipv6 [ <ipv6-prefix> ] [ local | remote ] [ ipv6-nexthop <ipv6-addr> ] [ inconsistency ] } | all [ inconsistency ] } [ __readonly__ [ TABLE_slb [ <slb_name> ] [ <slb_prefix> ] [ <slb_mask> ] <slb_vrf> <slb_inlabel> [ <slb_type> ] [ TABLE_slb_outlbl_list [ <slb_nh_path_num> ] <slb_nhop> <slb_outlabel> ] [ <inconsistency_reason> ] ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Show MPLS static information

binding

Show static label bindings

ipv4

Show ipv4 static label bindings

ipv6

Show ipv6 static label bindings

all

Show all static label bindings

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local

(Optional) Incoming (local) static label bindings

remote

(Optional) Outgoing (remote) static label bindings

inconsistency

(Optional) Inconsistent bindings between config and URIB

prefix

(Optional) Destination ipv4 prefix

mask

(Optional) Destination ipv4 prefix mask

mask-length

(Optional) Ipv4 mask length

prefix-mask

(Optional) Destination prefix/mask

nexthop

(Optional) Ipv4 next hop address

addr

(Optional) Ipv4 Next hop address

ipv6-nexthop

(Optional) Ipv6 next hop address

lsp

(Optional) LSP Name

__readonly__

(Optional) Read Only

TABLE_slb

(Optional) Show static label bindings for a given prefix

slb_name

(Optional) Name

slb_prefix

(Optional) Prefix

slb_type

(Optional) SLB Type

slb_mask

(Optional) Mask bits

slb_vrf

(Optional) VRF name for prefix

slb_inlabel

(Optional) Incoming label for prefix

TABLE_slb_outlbl_list

(Optional) Show static outgoing labels for prefix

slb_nhop

(Optional) Next-hop address

slb_nh_path_num

(Optional) Identifier for outgoing nexthop

slb_outlabel

(Optional) Outgoing label for next-hop address

inconsistency_reason

(Optional) Reason for inconsistency

Command Mode

- /exec

show mpls static binding vrf per-vrf

show mpls static binding [ ipv4 ] vrf { <vrf-name> | <vrf-known-name> } per-vrf [ __readonly__ { TABLE_slb_per_vrf <slb_vrf_per_vrf> <slb_inlabel_per_vrf> } ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Show MPLS static information

binding

Show static label bindings

ipv4

(Optional) Show ipv4 static label bindings

vrf

VRF Routing/Forwarding instance information

vrf-name

VRF name

vrf-known-name

Known VRF name

per-vrf

per-vrf static label bindings

__readonly__

(Optional) Read Only

TABLE_slb_per_vrf

(Optional) Show static label bindings for per-vrf deaggregation

slb_vrf_per_vrf

(Optional) VRF name

slb_inlabel_per_vrf

(Optional) Incoming label

Command Mode

- /exec

show mpls static trace

show mpls static trace { error | warning | event } [ size ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Static Label Bindings

trace

MPLS static trace

error

MPLS static error trace

warning

MPLS static warning trace

event

MPLS static event trace

size

(Optional) trace buffer size in Kbytes

Command Mode

- /exec

show mpls strip labels

show mpls strip labels [ all | static | dynamic | <label_val> ] [ __readonly__ <disp_summary> TABLE_labels <disp_label> <disp_age> <disp_interface> <disp_pkt_cnt> <disp_stats> <disp_static> ]

Syntax Description

show

Show running system information

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

labels

labels added in the system

all

(Optional) all labels [default]

static

(Optional) labels programmed using cli

dynamic

(Optional) dynamically learned

label_val

(Optional) Label to show

__readonly__

(Optional) Read Only

TABLE_labels

(Optional) MPLS Strip Labels Tables

disp_label

(Optional) Label

disp_age

(Optional) Age

disp_interface

(Optional) Interface

disp_pkt_cnt

(Optional) Packet Count

disp_stats

(Optional) Statistics

disp_static

(Optional) Static

disp_summary

(Optional) Summary

Command Mode

- /exec

show mpls switching

show mpls switching [ labels <label> [ <max-label> ] | interface <intf> | { <ip-addr> | <ipv4-prefix> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] | <ipv6-prefix> [ vrf { <vrf-name> | <vrf-known-name> | all } ] | traffic-eng srpath [ <srte-path-id> ] | aggregate [ ipv4 | ipv6 ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] | { fec { ipv4_prefix [ vrf { <vrf-name> | <vrf-known-name> | all } ] | ipv6_prefix [ vrf { <vrf-name> | <vrf-known-name> | all } ] | deagg [ vrf { <vrf-name> | <vrf-known-name> | all | ias_vpnv4 | ias_vpnv6 } ] } } | { summary } ] [ detail ] [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ [ TABLE_vrf [ <vrf_name> ] [ [ TABLE_inlabel <in_label> [ { <out_label_stack> + } { <ipv4_prefix> | <ipv6_prefix> } <out_interface> { <ipv4_next_hop> | <ipv6_next_hop> } ] [ <deagg_vrf> [ <deagg_af> ] ] [ { <tunnel_v4_mid_source> | <tunnel_v6_mid_source> } <tunnel_id> { <ext_v4_tunnel_id> | <ext_v6_tunnel_id> } <tunnel_instance> <tunnel_head> ] [ <nhlfe_p2p_flag> ] [ <nhlfe_frr_status> ] [ <nhlfe_stale_flag> ] [ <in_packets> <in_bytes> ] [ [ <out_label> + ] <out_packets> + <out_bytes> + ] [ { <tunnel_v4_mid_dest> | <tunnel_v6_mid_dest> } { <ipv4_next_hop> | <ipv6_next_hop> } ] [ <per_ce_table> <per_ce_nh_set_id> ] [ { <ias_v4_prefix> | <ias_v6_prefix> } <ias_rd> ] [ <fec_none_label> ] [ <srte_path_id> ] [ <table_name> ] ] [ TABLE_adj_sid_inlabel <adj_sid_in_label> <out_label> { <ipv4_addr> | <ipv6_addr> } <out_interface> { <adj_sid_ipv4_next_hop> | <adj_sid_ipv6_next_hop> } [ <in_packets> <in_bytes> ] [ [ <out_label> + ] <out_packets> + <out_bytes> + ] ] ] ] [ TABLE_block <blockid> <lbl_range> ] ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

traffic-eng

(Optional) Show traffic-engineering related entries

srpath

(Optional) Show traffic-engineering segment-routing path entries

ip-addr

(Optional) Match destination address

ipv4-prefix

(Optional) Specify an IP prefix/mask

fec

(Optional) Show FEC information in the ULIB

private

(Optional) Show more detailed information in the ULIB

labels

(Optional) Show a specific label-related information

label

(Optional) Low label value

max-label

(Optional) High label value

interface

(Optional) Match outgoing interface

aggregate

(Optional) Show aggregate-related information

intf

(Optional) Specify outgoing interface

summary

(Optional) Summarized information

detail

(Optional) Detailed information

ipv4_prefix

(Optional) IPv4 prefix

ipv6_prefix

(Optional) IPv6 prefix

ipv4

(Optional) Display IPv4 information

ipv6

(Optional) Display IPv6 information

deagg

(Optional) De-aggregation

ias_vpnv4

(Optional) Display Inter-AS V4 information

ias_vpnv6

(Optional) Display Inter-AS V6 information

srte-path-id

(Optional) Traffic-engineering segment-routing path id

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf_name

(Optional)

TABLE_inlabel

(Optional)

in_label

(Optional)

out_label_stack

(Optional)

ipv4_prefix

(Optional)

tunnel_v4_mid_source

(Optional)

tunnel_v4_mid_dest

(Optional)

tunnel_id

(Optional)

ext_v4_tunnel_id

(Optional)

tunnel_instance

(Optional)

tunnel_head

(Optional)

deagg_vrf

(Optional)

deagg_af

(Optional)

out_interface

(Optional)

ipv4_next_hop

(Optional)

ipv6_next_hop

(Optional)

nhlfe_frr_status

(Optional)

nhlfe_stale_flag

(Optional)

nhlfe_p2p_flag

(Optional)

table_name

(Optional)

in_packets

(Optional)

in_bytes

(Optional)

out_label

(Optional)

out_packets

(Optional)

out_bytes

(Optional)

per_ce_table

(Optional)

per_ce_nh_set_id

(Optional)

fec_none_label

(Optional)

ias_v4_prefix

(Optional)

ias_v6_prefix

(Optional)

ias_rd

(Optional)

srte_path_id

(Optional)

TABLE_adj_sid_inlabel

(Optional)

adj_sid_in_label

(Optional)

out_label

(Optional)

ipv4_addr

(Optional)

out_interface

(Optional)

adj_sid_ipv4_next_hop

(Optional)

adj_sid_ipv6_next_hop

(Optional)

in_packets

(Optional)

in_bytes

(Optional)

out_packets

(Optional)

out_bytes

(Optional)

TABLE_block

(Optional)

blockid

(Optional)

lbl_range

(Optional)

Command Mode

- /exec

show mpls switching clients

show mpls switching clients [ __readonly__ [ TABLE_client <pib-name> <pib-index> <pib-uuid> <pib-sap> <stale-time> <pib-flag> [ <stale-due> ] <reg-msg> <conv-msg> [ <inv-conv> ] <fec-msg> <fec-add> <ile-add> <fec-del> <ile-del> <last-xid> <fec-ack> ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

clients

Display ULIB client components

__readonly__

(Optional)

TABLE_client

(Optional)

pib-name

(Optional) Name of the client(pib)

pib-index

(Optional) PIB Index

pib-uuid

(Optional) PIB UUID

pib-sap

(Optional) MTS SAP for the pib

stale-time

(Optional) Stale time

pib-flag

(Optional) Flags set by the pib

stale-due

(Optional) Stale timer due in

reg-msg

(Optional) Number of Registration Message

conv-msg

(Optional) Number of Converge Message

inv-conv

(Optional) Number of Invalid Convergence message

fec-msg

(Optional) Number of FEC messages

fec-add

(Optional) Number of FEC Add messages

ile-add

(Optional) Number of ILE Add messages

fec-del

(Optional) Number of FEC delete messages

ile-del

(Optional) Number of ILE delete messages

last-xid

(Optional) Last XID

fec-ack

(Optional) Number of FEC Ack messages sent

Command Mode

- /exec

show mvpn bgp mdt

show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source <src-addr> ] [ __readonly__ { TABLE_entry <bgp_rd> <mdt_src> <mdt_grp> <local> } ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

bgp

Display BGP related information

mdt-safi

Display Auto-discovered BGP MDT-SAFI database

auto-discovery

Display Auto-discovered BGP MDT-SAFI database

mdt-source

(Optional) Source address of MVPN neighbor

src-addr

(Optional) Source Address

__readonly__

(Optional)

TABLE_entry

(Optional)

bgp_rd

(Optional)

mdt_src

(Optional)

mdt_grp

(Optional)

local

(Optional)

Command Mode

- /exec

show mvpn mdt encap

show mvpn mdt encap [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> { TABLE_encap <encap_index> <mdt_grp> <mdt_src> <mdt_src_if> } ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

mdt

Display MDT information

encap

Display MDT Encap table

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_encap

(Optional)

encap_index

(Optional)

mdt_grp

(Optional)

mdt_src

(Optional)

mdt_src_if

(Optional)

Command Mode

- /exec

show mvpn mdt route

show mvpn mdt route [ detail ] [ __readonly__ TABLE_vrf <out_context> [ TABLE_mroute <src_addr> <grp_addr> <uptime> <ref_count> ] ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

mdt

Display MDT information

route

Display MDT route information

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_mroute

(Optional)

src_addr

(Optional)

grp_addr

(Optional)

uptime

(Optional)

ref_count

(Optional)

Command Mode

- /exec

show mvr

show mvr [ verbose ] [ __readonly__ <mvr-status> <mvr-default-vlan> <number-of-mvr-vlans> [ <mvr-group-list> <cfg-nodes> <interface-cfg-nodes> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

verbose

(Optional) Show in detail

__readonly__

(Optional)

mvr-status

(Optional)

mvr-default-vlan

(Optional)

number-of-mvr-vlans

(Optional)

mvr-group-list

(Optional)

cfg-nodes

(Optional)

interface-cfg-nodes

(Optional)

Command Mode

- /exec

show mvr groups

show mvr groups [ __readonly__ [ TABLE_group_list <ip-address> <ip-max-addr> <rn-count-char> <rn-count> <mvr-vlan-string> <if-name> ] [ [ <interface-name> ] [ <mvr-vlan> ] [ TABLE_mvr_vlan <global-mvr-vlan> ] <mvr-groups> <mvr-receiver-type> <mvr-source-type> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

groups

show mvr groups config

__readonly__

(Optional)

TABLE_group_list

(Optional)

ip-address

(Optional)

ip-max-addr

(Optional)

rn-count-char

(Optional)

rn-count

(Optional)

mvr-vlan-string

(Optional)

if-name

(Optional)

interface-name

(Optional)

mvr-vlan

(Optional)

TABLE_mvr_vlan

(Optional)

global-mvr-vlan

(Optional)

mvr-groups

(Optional)

mvr-receiver-type

(Optional)

mvr-source-type

(Optional)

Command Mode

- /exec

show mvr interface

show mvr interface [ <if0> ] [ __readonly__ [ TABLE_if_name <interface-name> <access-vlan> <src-rcvr> <igmp-mvr-port-status> <mvr-vlan-str> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

interface

show mvr interfaces

if0

(Optional) Interface name

__readonly__

(Optional)

TABLE_if_name

(Optional)

interface-name

(Optional)

access-vlan

(Optional)

src-rcvr

(Optional)

igmp-mvr-port-status

(Optional)

mvr-vlan-str

(Optional)

Command Mode

- /exec

show mvr members

show mvr members [ interface <if0> ] [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <group> <status> [ TABLE_members_if <if-name> ] ] [ <vlan> <mvr-group> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

members

show active mvr groups

interface

(Optional) show active mvr groups config on interface

if0

(Optional) Interface name

__readonly__

(Optional)

TABLE_mvr_vlan

(Optional)

mvr-vlan

(Optional)

group

(Optional)

status

(Optional)

TABLE_members_if

(Optional)

if-name

(Optional)

vlan

(Optional)

mvr-group

(Optional)

Command Mode

- /exec

show mvr members count

show mvr members count [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <mvr-members-count> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

members

show active mvr groups

count

Active mvr groups on each mvr-vlan

__readonly__

(Optional)

TABLE_mvr_vlan

(Optional)

mvr-vlan

(Optional)

mvr-members-count

(Optional)

Command Mode

- /exec

show mvr members vlan

show mvr members { vlan <vlan-id> } [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <grp> <stat> [ TABLE_interface_vlan <interface-name> ] ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

members

show active mvr groups

vlan

vlan

vlan-id

Enter MVR Vlan

__readonly__

(Optional)

TABLE_mvr_vlan

(Optional)

mvr-vlan

(Optional)

grp

(Optional)

stat

(Optional)

TABLE_interface_vlan

(Optional)

interface-name

(Optional)

Command Mode

- /exec

show mvr receiver-ports

show mvr receiver-ports [ <if0> ] [ __readonly__ [ TABLE_mvr_if_name <mvr-if-name> <mvr-vlan-str> <igmp-port-status> <rx_reports> <rx_leaves> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

receiver-ports

List MVR receiver ports

if0

(Optional) Interface name

__readonly__

(Optional)

TABLE_mvr_if_name

(Optional)

mvr-if-name

(Optional)

mvr-vlan-str

(Optional)

igmp-port-status

(Optional)

rx_reports

(Optional)

rx_leaves

(Optional)

Command Mode

- /exec

show mvr source-ports

show mvr source-ports [ <if0> ] [ __readonly__ [ TABLE_mvr_if_name <mvr-if-name> <interface-name> <igmp-port-status> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

source-ports

List MVR source ports

if0

(Optional) Interface name

__readonly__

(Optional)

TABLE_mvr_if_name

(Optional)

mvr-if-name

(Optional)

interface-name

(Optional)

igmp-port-status

(Optional)

Command Mode

- /exec

Chapter 14. N Show Commands

- show nbm controller

- show nbm defaults

- show nbm flow-policy

- show nbm flows

- show nbm flows bandwidth

- show nbm flows statistics

- show nbm flows summary

- show nbm host-policy all

- show nbm host-policy applied

- show nbm host-policy applied receiver

- show nbm interface bandwidth

- show nbm switch-role

- show ngoam acl status

- show ngoam actsessions

- show ngoam interface statistics

- show ngoam loopback

- show ngoam pathtrace

- show ngoam probe

- show ngoam role

- show ngoam traceroute statistics

- show ngoam xconnect session

- show npv external-interface-usage

- show npv flogi-table

- show npv status

- show npv traffic-map

- show npv traffic-usage

- show ntp access-groups

- show ntp authentication-keys

- show ntp authentication-status

- show ntp information

- show ntp logging-status

- show ntp peer-status

- show ntp peers

- show ntp rts-update

- show ntp session status

- show ntp source-interface

- show ntp source

- show ntp statistics

- show ntp status

- show ntp trusted-keys

- show nve bfd neighbors

- show nve core-links

- show nve ethernet-segment

- show nve interface

- show nve multisite dci-links

- show nve multisite fabric-links

- show nve peers

- show nve peers interface counters

- show nve peers vni interface counters

- show nve replication-servers

- show nve vni

- show nve vni counters

- show nve vni ingress-replication

- show nve vni peer-vtep

- show nve vrf

- show nve vxlan-params

- show nxapi-server logs

- show nxapi

show nbm controller

show nbm controller [ __readonly__ <vrf> <ip> <status> <online_since> ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

controller

Controller mode information

__readonly__

(Optional)

vrf

(Optional) nbm controller vrf

ip

(Optional) nbm controller ip address

status

(Optional) nbm controller status

online_since

(Optional) nbm controller online time

Command Mode

- /exec

show nbm defaults

show nbm defaults

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

defaults

Default config

Command Mode

- /exec

show nbm flow-policy

show nbm flow-policy [ name { <policy-name> } ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flow-policy

Flow policy show command

name

(Optional) Policy name

policy-name

(Optional) Policy name value

Command Mode

- /exec

show nbm flows

show nbm flows [ group-based | m-group <group-ip-id> | { flow-policy { <cfg-pol-name> | <unknown-pol-name> } } | source <source-ip> [ group <group-ip> ] | group <group-ip> [ source <source-ip> ] | interface <if-name> ] [ all | active | inactive | no-receiver ] [ detail ] [ __readonly__ TABLE_flows { <mcast_grp> <src_ip> <start_time> <src_intf> <src_nbr_device> <lid> <status> <num_rx> <bw_mbps> <cfg_mbps> <src_slot> <unit> <slice> } [ { <act_slot> <act_unit> <stdby_slot> <stdby_unit> } ] { <dscp> <qos> <owner_type> <pol_name> } [ <flag> ] [ { <n_link> <num_links> } ] [ { <slot_2> <unit_2> <num_rx_2> } ] [ { <iiod> <ilink> <i_ifidx> <fab_iiod> <fab_oiod> <fab_ifidx> <oiod> <olink> <i_ieth_port> <fab_ieth_port> } ] [ { <rcv_if_idx> <iod> <name> <rcv_nbr_device> } ] [ { <end_timestr> <flow_rate_bps> <packets> <bytes> } ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows (default will be active flows)

active

(Optional) Active flows (default)

inactive

(Optional) Inactive flows

no-receiver

(Optional) Flows without any receiver

all

(Optional) Both active and inactive flows

group-based

(Optional) Multicast group based (*,G) flows to IGMP receivers

m-group

(Optional) Multicast group

group-ip-id

(Optional) Multicast group address

flow-policy

(Optional) Flow policy

cfg-pol-name

(Optional) Policy name

unknown-pol-name

(Optional) Policy name

source

(Optional) Source IP address

source-ip

(Optional) Source IP address

group

(Optional) Multicast group

group-ip

(Optional) Multicast group address

interface

(Optional) Ingress interface

detail

(Optional) Detailed output

if-name

(Optional) Interface name

__readonly__

(Optional)

TABLE_flows

(Optional) Flow stats table

mcast_grp

(Optional) Multicast group IP

src_ip

(Optional) Source IP

start_time

(Optional) Start time

src_intf

(Optional) Ingress source interface

src_nbr_device

(Optional) Ingress neighbor device name

lid

(Optional) Logical internal flow ID

status

(Optional) Flow status

num_rx

(Optional) Number of receivers

bw_mbps

(Optional) Set bandwidth

cfg_mbps

(Optional) Configured bandwidth

src_slot

(Optional) Source slot

unit

(Optional) Source unit

slice

(Optional) Source slice

dscp

(Optional) Flow DSCP

qos

(Optional) Flow QOS group

owner_type

(Optional) Flow Owner type

pol_name

(Optional) Flow Policy name

flag

(Optional) Flow not guarantee flag

n_link

(Optional) N Link

num_links

(Optional) Number of Links

act_slot

(Optional) Active FM Slot

act_unit

(Optional) Active FM Unit

stdby_slot

(Optional) Standby FM Slot

stdby_unit

(Optional) Standby FM Unit

slot_2

(Optional) Slot

unit_2

(Optional) Unit

num_rx_2

(Optional) Number of Receivers

iiod

(Optional) IIOD

ilink

(Optional) Ilink

i_ifidx

(Optional) Internal IF IDX

fab_iiod

(Optional) Fabric IIOD

fab_oiod

(Optional) Fabric OIOD

fab_ifidx

(Optional) Fabric IFIDX

oiod

(Optional) OIOD

olink

(Optional) OLink

i_ieth_port

(Optional) Internal IEth Link

fab_ieth_port

(Optional) Fabric IEth Port

rcv_if_idx

(Optional) Receiver interface index

iod

(Optional) Outgoing IOD

name

(Optional) Outgoing interface name

rcv_nbr_device

(Optional) Outgoing neighbor device name

end_timestr

(Optional) Deleted flow end time

flow_rate_bps

(Optional) Deleted flow flow rate in bps

packets

(Optional) Deleted flow packets

bytes

(Optional) Deleted flow bytes

Command Mode

- /exec

show nbm flows bandwidth

show nbm flows bandwidth

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows

bandwidth

Per Flow Bandwidth in Mbps

Command Mode

- /exec

show nbm flows statistics

show nbm flows statistics [ group-based | m-group <group-ip-id> | { flow-policy { <cfg-pol-name> | <unknown-pol-name> } } ] [ interface <if-name> ] [ __readonly__ { TABLE_stats <mcast_grp> <src_ip> <start_time> <src_intf> <packets> <bytes> <allow_bytes> <drop_bytes> } ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows

statistics

Flow statistics

group-based

(Optional) Multicast group based (*,G) flows to IGMP receivers

m-group

(Optional) Multicast group

group-ip-id

(Optional) Multicast group address

flow-policy

(Optional) Flow policy

cfg-pol-name

(Optional) Policy name

unknown-pol-name

(Optional) Policy name

interface

(Optional) Ingress port

if-name

(Optional) Interface name

__readonly__

(Optional)

TABLE_stats

(Optional) Flow stats table

mcast_grp

(Optional) Multicast group IP

src_ip

(Optional) Source IP

start_time

(Optional) Start time

src_intf

(Optional) Ingress source interface

packets

(Optional) Packets

bytes

(Optional) Bytes

allow_bytes

(Optional) Allowed bytes

drop_bytes

(Optional) Droped bytes

Command Mode

- /exec

show nbm flows summary

show nbm flows summary [ __readonly__ TABLE_flows_summary { <flow_type> <sg> <starg> <total> } ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM Flows

summary

NBM Flow Summary

__readonly__

(Optional)

TABLE_flows_summary

(Optional) Flows summary

flow_type

(Optional) Type of Flow Summary

sg

(Optional) (S,G) number of flows

starg

(Optional) (*,G) number of flows

total

(Optional) Total Flows

Command Mode

- /exec

show nbm host-policy all

show nbm host-policy all { sender | { receiver { local | external } } }

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

host-policy

Host policy

all

All policies on switch

sender

Sender Policy

receiver

Receiver Policy

local

Local receiver policy

external

External receiver policy

Command Mode

- /exec

show nbm host-policy applied

show nbm host-policy applied { sender { all | interface { <if-name> } } }

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

host-policy

Host policy

applied

Applied policies only

sender

Sender Policy

all

All policies on switch

interface

Interface

if-name

Interface name

Command Mode

- /exec

show nbm host-policy applied receiver

show nbm host-policy applied receiver { local { all | interface { <if-name> } } | external }

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

host-policy

Host policy

applied

Applied policies only

receiver

Receiver Policy

local

Local receiver policy

all

All policies on switch

external

External receiver policy

interface

Interface

if-name

Interface name

Command Mode

- /exec

show nbm interface bandwidth

show nbm interface bandwidth [ __readonly__ [ TABLE_bw { <index> <ifname> <iod> <slot> <unit> <slice> <ingr_fl_bw_available> <ingr_fl_bw_usable> <ingr_fl_bw_capacity> <egr_fl_bw_available> <egr_fl_bw_capacity> <nbr_dev_id> <nbr_dev_name> <external> } ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

interface

interface

bandwidth

Bandwidth interface table

__readonly__

(Optional)

TABLE_bw

(Optional) TABLE BW

index

(Optional) Index

ifname

(Optional) Interface

iod

(Optional) IOD

slot

(Optional) SLOT

unit

(Optional) UNIT

slice

(Optional) SLICE

ingr_fl_bw_available

(Optional) Ingress Flow BW available

ingr_fl_bw_usable

(Optional) Ingress Flow BW usable

ingr_fl_bw_capacity

(Optional) Ingress Flow BW capacity

egr_fl_bw_available

(Optional) Egress Flow BW available

egr_fl_bw_capacity

(Optional) Egress Flow BW capacity

nbr_dev_id

(Optional) Neighbor device ID

nbr_dev_name

(Optional) Neighbor device name

external

(Optional) External

Command Mode

- /exec

show nbm switch-role

show nbm switch-role [ __readonly__ <switch_role> ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

switch-role

Switch role information

__readonly__

(Optional)

switch_role

(Optional) switch role

Command Mode

- /exec

show ngoam acl status

show ngoam acl status [ __readonly__ [ LIST_bds { <bd-id> } ] <end-row> <top-line> ]

Syntax Description

show

Show running system information

ngoam

ngoam

acl

Show acl info

status

Show acl install status

__readonly__

(Optional) Read Only

LIST_bds

(Optional) List of all bds acls is installed on

bd-id

(Optional) Bridge-Domain identifier

end-row

(Optional) Carriage return

top-line

(Optional) Placeholder for printing the headline

Command Mode

- /exec

show ngoam actsessions

show ngoam actsessions

Syntax Description

show

Show running system information

ngoam

ngoam information

actsessions

show

Command Mode

- /exec

show ngoam interface statistics

show ngoam interface statistics [ __readonly__ [ TABLE_stats { <interface-name> <tx> <rx> } <statistics-end> ] ]

Syntax Description

TABLE_stats

(Optional) interface statistics table

interface-name

(Optional) interface namestring

tx

(Optional) ngoam probe transmit on the interface

rx

(Optional) ngoam probe receive on the interface

show

Show running system information

ngoam

ngoam

interface

probe packet interface

statistics

ngoam probe interface statistics

__readonly__

(Optional) Read Only

statistics-end

(Optional) statistics table end marker

Command Mode

- /exec

show ngoam loopback

show ngoam loopback { { statistics { session { <handle> | all } | summary } } | { status { session { <handle> | all } } } } [ __readonly__ [ TABLE_statistics { <sender-handle> <connect-check-id> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_status { <st-sender-handle> <type> <state> } + ] [ TABLE_statistics_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <req-sw-fwd> <req-drop> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> <resp-sw-fwd> <resp-drop> } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam

loopback

ngoam loopback

statistics

ngoam loopback statistics

summary

ngoam loopback statistics summary

status

ngoam loopback status

session

ngoam loopback session

session

ngoam loopback session

handle

ngoam loopback session handle

handle

ngoam loopback session handle

all

Display results for all ping/loopback sessions

all

Display results for all ping/loopback sessions

TABLE_statistics

(Optional) statistics table

sender-handle

(Optional) sender handle

connect-check-id

(Optional) connect check id

last-clear-stats

(Optional) last clear time for statistics

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_statistics_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

req-sw-fwd

(Optional) Request pkts sw fwded

resp-sw-fwd

(Optional) Response pkts sw fwded

req-drop

(Optional) Requests dropped

resp-drop

(Optional) Responses dropped

TABLE_status

(Optional) database status table

st-sender-handle

(Optional) sender handle

type

(Optional) ngoam ping type

state

(Optional) ngoam ping state

__readonly__

(Optional) Read Only

Command Mode

- /exec

show ngoam pathtrace

show ngoam pathtrace { { statistics { summary | { session { <handle> | all } } } } | { database session { <handle> | all } [ detail ] } } [ __readonly__ [ TABLE_stats { <sender-handle> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <req-sw-fwd> <req-drop> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> <resp-sw-fwd> <resp-drop> } ] [ TABLE_database { <db-sender-handle> <db-start-time> <db-end-time> <db-last-clear-stats> <db-tx> <db-rx> <db-timeout> <db-unsent> <db-req-sw-fwd> <db-req-drop> <db-resp-tx> <db-resp-rx> <db-resp-unsent> <db-resp-dup> <db-resp-sw-fwd> <db-resp-drop> { <seq-number> <cli-status> [ <reply-ip> ] [ <reply-ipv6> ] [ <ingress-if> ] [ <ingress-if-state> ] [ <egress-if> ] [ <egress-if-state> ] [ <end-row> ] + } + } + ] [ TABLE_ifstats { <if-name> <rx-len> <rx-bytes> <rx-pkt-rate> <rx-byte-rate> <rx-load> <rx-ucast> <rx-mcast> <rx-bcast> <rx-errors> <rx-discards> <rx-unknown> <rx-bandwidth> <tx-len> <tx-bytes> <tx-pkt-rate> <tx-byte-rate> <tx-load> <tx-ucast> <tx-mcast> <tx-bcast> <tx-discards> <tx-errors> <tx-bandwidth> } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam

pathtrace

ngoam pathtrace

statistics

ngoam pathtrace statistics

end-row

(Optional) Row end

summary

ngoam pathtrace statistics summary

session

ngoam pathtrace session

handle

ngoam pathtrace session handle

all

Display results for all pathtrace sessions

database

ngoam pathtrace results from the database

session

ngoam pathtrace session

all

Display results for all pathtrace sessions

handle

ngoam pathtrace session handle

detail

(Optional) Show detailed stats if present

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

last-clear-stats

(Optional) last clear time for statistics

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

req-sw-fwd

(Optional) Request pkts sw fwded

db-req-sw-fwd

(Optional) Request pkts sw fwded

resp-sw-fwd

(Optional) Response pkts sw fwded

db-resp-sw-fwd

(Optional) Response pkts sw fwded

req-drop

(Optional) Requests dropped

db-req-drop

(Optional) Requests dropped

resp-drop

(Optional) Responses dropped

db-resp-drop

(Optional) Responses dropped

TABLE_database

(Optional) pathtrace database

seq-number

(Optional) Sequence number

cli-status

(Optional) ngoam pathtrace status

ingress-if

(Optional) Ingress interface

egress-if

(Optional) Egress interface

ingress-if-state

(Optional) Ingress interface state

egress-if-state

(Optional) Egress interface state

reply-ip

(Optional) ngoam pathrace reply ip

db-sender-handle

(Optional) Sender handle

db-start-time

(Optional) Start time

db-end-time

(Optional) End time

db-last-clear-stats

(Optional) Last clear stats

db-tx

(Optional) Tx packets

db-rx

(Optional) Rx packets

db-timeout

(Optional) Timeout

db-unsent

(Optional) Unsent

db-resp-tx

(Optional) Response tx

db-resp-rx

(Optional) Response Rx

db-resp-unsent

(Optional) Response unsent

db-resp-dup

(Optional) Duplicate response recvd

TABLE_ifstats

(Optional) Interface statistics

if-name

(Optional) Interface name

rx-len

(Optional) Rx Length

rx-bytes

(Optional) Rx Bytes

rx-pkt-rate

(Optional) Rx packet rate

rx-byte-rate

(Optional) Rx byte rate

rx-load

(Optional) Rx load

rx-ucast

(Optional) Rx unicast pkts

rx-mcast

(Optional) Rx mcast pkts

rx-bcast

(Optional) Rx bcast pkts

rx-discards

(Optional) Rx discards

rx-errors

(Optional) Rx errors

rx-unknown

(Optional) Rx unknown

rx-bandwidth

(Optional) Rx bandwidth

tx-len

(Optional) Tx Length

tx-bytes

(Optional) Tx Bytes

tx-pkt-rate

(Optional) Tx packet rate

tx-byte-rate

(Optional) Tx byte rate

tx-load

(Optional) Tx load

tx-ucast

(Optional) Tx unicast pkts

tx-mcast

(Optional) Tx mcast pkts

tx-bcast

(Optional) Tx bcast pkts

tx-discards

(Optional) Tx discards

tx-errors

(Optional) Tx unknown

tx-bandwidth

(Optional) Tx bandwidth

__readonly__

(Optional) Read Only

Command Mode

- /exec

show ngoam probe

show ngoam probe { { statistics { summary | { session { <handle> | all } } } } } [ __readonly__ [ TABLE_stats { <sender-handle> <transaction-id> <dst-vip> <vni> <oam-type> <flow-str> <last-clear-stats> <req-sent> <req-not-sent> } <statistics-end> ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam

probe

ngoam probe

statistics

ngoam probe statistics

summary

ngoam probe statistics summary

session

ngoam probe session

handle

ngoam probe session handle

all

Display results for all probe sessions

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

transaction-id

(Optional) Transaction Identifier

dst-vip

(Optional) Destination Vtep ip address

vni

(Optional) vxlan header vni

oam-type

(Optional) draft pang oam type

flow-str

(Optional) 128 byte flow string.

last-clear-stats

(Optional) last clear time for statistics

req-sent

(Optional) request sent

req-not-sent

(Optional) request not sent or failed

statistics-end

(Optional) statistics table end marker

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

__readonly__

(Optional) Read Only

Command Mode

- /exec

show ngoam role

show ngoam role

Syntax Description

show

Show running system information

ngoam

ngoam information

role

show draft pang derived role info

Command Mode

- /exec

show ngoam traceroute statistics

show ngoam traceroute statistics { summary | { session { <handle> | all } } } [ __readonly__ [ TABLE_stats { <sender-handle> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam

traceroute

ngoam traceroute

statistics

ngoam traceroute statistics

summary

ngoam traceroute statistics summary

session

ngoam traceroute session

handle

ngoam traceroute session handle

all

Display results for all traceroute sessions

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

last-clear-stats

(Optional) last clear time for statistics

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

__readonly__

(Optional) Read Only

Command Mode

- /exec

show ngoam xconnect session

show ngoam xconnect session { <id> [ iodb ] | all [ dbdump ] } [ __readonly__ [ TABLE_xc_db_summary { [ <legend> ] <vlan-id> <peer-ip> <vni> <db-state> <local-if> <local-if-state> <remote-if> <remote-if-state> [ <end-row> ] + } + ] [ ENTRY_xc_db_detail { <detail> <d-vlan-id> <d-peer-ip> [ <peer-name> ] <d-vni> <d-db-state> <last-state-change-ts> <d-local-if> <d-local-if-state> <vpc-if> <vpc-if-state> <remote-if-detail> <remote-if-detail-state> <remote-vpc-if> <remote-vpc-if-state> [ <d-end-row> ] + } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam information

xconnect

crossconnect info

session

xc session id

id

Vlan-id of the xc

iodb

(Optional) Iodb

all

show summary info for all sessions

__readonly__

(Optional) Read Only

TABLE_xc_db_summary

(Optional) XC Db table

ENTRY_xc_db_detail

(Optional) XC Db detail

detail

(Optional) Detail or not

vlan-id

(Optional) Vlan id

d-vlan-id

(Optional) Vlan id

vni

(Optional) vni

d-vni

(Optional) vni

local-if

(Optional) Interface

d-local-if

(Optional) Interface

local-if-state

(Optional) Interface state

d-local-if-state

(Optional) Interface state

remote-if

(Optional) Remote interface

remote-if-state

(Optional) Remote interface state

remote-if-detail

(Optional) Remote interface

remote-if-detail-state

(Optional) Remote interface state

vpc-if

(Optional) Interface

vpc-if-state

(Optional) Interface state

remote-vpc-if

(Optional) Remote vpc interface

remote-vpc-if-state

(Optional) Remote vpc interface state

db-state

(Optional) XC state

d-db-state

(Optional) XC state

last-state-change-ts

(Optional) Last state change timestamp

peer-ip

(Optional) Peer ip

d-peer-ip

(Optional) Peer ip

peer-name

(Optional) Peer name

end-row

(Optional) end row

d-end-row

(Optional) end row

legend

(Optional) legend

dbdump

(Optional) Dump the whole database

Command Mode

- /exec

show npv external-interface-usage

show npv external-interface-usage [ server-interface <if0> ] [ __readonly__ { TABLE_intf_usage <svr_intf> <ext_intf> } ]

Syntax Description

show

Show running system information

npv

Show information about NPV

external-interface-usage

Show external interface usage by server interfaces

server-interface

(Optional) Show external interface usage by a server interface

if0

(Optional)

__readonly__

(Optional) Read Only

TABLE_intf_usage

(Optional) External Interfaces Usage Table

svr_intf

(Optional) Server Interface

ext_intf

(Optional) External Interface

Command Mode

- /exec

show npv flogi-table

show npv flogi-table [ { interface <if0> | vsan <i0> } ] [ __readonly__ [ [ TABLE_flogi <svr_intf> <vsan_id> <fcid> <pwwn> <ext_intf> <nwwn> ] [ <flogi_count> ] ] ]

Syntax Description

show

Show running system information

npv

Show information about NPV

flogi-table

Show information about FLOGI sessions

interface

(Optional) Show information about FLOGI sessions for a server interface

if0

(Optional)

vsan

(Optional) Show information about FLOGI sessions for a VSAN

i0

(Optional)

__readonly__

(Optional) Read Only

TABLE_flogi

(Optional) FLOGI Table

svr_intf

(Optional) Server Interface

vsan_id

(Optional) VSAN ID

fcid

(Optional) FLOGI FCID

pwwn

(Optional) The PWWN

ext_intf

(Optional) External Interface

nwwn

(Optional) The NWWN

flogi_count

(Optional) Total FLOGI Count

Command Mode

- /exec

show npv status

show npv status [ vsan <i0> ] [ __readonly__ [ [ <npiv_status> ] [ <load_balance> ] [ { TABLE_extintf <ext_intf> [ <ext_vsan> ] [ <ext_fcid> ] <ext_state> [ { TABLE_vsan <vsan_vsan> <vsan_state> [ <vsan_fcid> ] } ] } ] <ext_intf_count> [ { TABLE_svrintf <svr_intf> <svr_vsan> <svr_state> } ] <svr_intf_count> ] ]

Syntax Description

show

Show running system information

npv

Show information about NPV

status

Show NPV status

vsan

(Optional) Show NPV status for a specific VSAN

i0

(Optional)

__readonly__

(Optional) Read Only

npiv_status

(Optional) NPIV enable/disable status

load_balance

(Optional) disruptive load balance status

TABLE_extintf

(Optional) External Interfaces Table

ext_intf

(Optional) External Interface

ext_vsan

(Optional) External Interface VSAN

ext_fcid

(Optional) External Interface FCID

ext_state

(Optional) External Interface State

TABLE_vsan

(Optional) External Interfaces VSAN Table

vsan_vsan

(Optional) External Interface VSAN

vsan_state

(Optional) VSAN State

vsan_fcid

(Optional) VSAN FCID

ext_intf_count

(Optional) External Interface count

TABLE_svrintf

(Optional) Server Interfaces Table

svr_intf

(Optional) Server Interface

svr_vsan

(Optional) Server Interface VSAN

svr_state

(Optional) Server Interface State

svr_intf_count

(Optional) Server Interface count

Command Mode

- /exec

show npv traffic-map

show npv traffic-map [ server-interface <if0> ] [ __readonly__ [ { TABLE_traffic_map <svr_intf> <ext_intf> } ] ]

Syntax Description

show

Show running system information

npv

Show information about NPV

traffic-map

Show information about Traffic Map

server-interface

(Optional) Show information about Traffic map for a server interface

if0

(Optional)

__readonly__

(Optional) Read Only

TABLE_traffic_map

(Optional) Traffic Map Table

svr_intf

(Optional) Server Interface

ext_intf

(Optional) External Interface

Command Mode

- /exec

show npv traffic-usage

show npv traffic-usage [ server-interface <if0> ]

Syntax Description

show

Show running system information

npv

Show information about NPV

traffic-usage

Show information about Traffic Usage

server-interface

(Optional) Show Traffic usage for a server interface

if0

(Optional)

Command Mode

- /exec

show ntp access-groups

show ntp access-groups [ __readonly__ [ <matchall> ] [ { TABLE_accessgroups <accesslist> [ <type> ] } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

access-groups

Display NTP access groups

__readonly__

(Optional)

matchall

(Optional) matchall

TABLE_accessgroups

(Optional) accessgroups

accesslist

(Optional) accesslist

type

(Optional) type

Command Mode

- /exec

show ntp authentication-keys

show ntp authentication-keys [ __readonly__ [ { TABLE_authkeys <Authkey> [ <MD5String> ] } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

authentication-keys

Display authentication keys

__readonly__

(Optional)

TABLE_authkeys

(Optional) authentication keys

Authkey

(Optional) authentication key

MD5String

(Optional) password

Command Mode

- /exec

show ntp authentication-status

show ntp authentication-status [ __readonly__ [ <authentication> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

authentication-status

NTP Authentication Status

__readonly__

(Optional)

authentication

(Optional) authentication enabled/disabled

Command Mode

- /exec

show ntp information

show ntp information [ __readonly__ [ <system_type> ] [ <software_version> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

information

Show ntp information

__readonly__

(Optional)

system_type

(Optional) Ntp System Type

software_version

(Optional) Ntp Software Version

Command Mode

- /exec

show ntp logging-status

show ntp logging-status [ __readonly__ [ <loggingstatus> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

logging-status

Display NTP logging status

__readonly__

(Optional)

loggingstatus

(Optional) logging enabled/disabled

Command Mode

- /exec

show ntp peer-status

show ntp peer-status [ __readonly__ [ <totalpeers> ] [ { TABLE_peersstatus <syncmode> <remote> <local> <st> <poll> <reach> <delay> [ <vrf> ] } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

peer-status

Show the status for all the server/peers

__readonly__

(Optional)

totalpeers

(Optional) totalpeers

TABLE_peersstatus

(Optional) peersstatus

syncmode

(Optional) peermode

remote

(Optional) remote addr

local

(Optional) local addr

st

(Optional) stratum

poll

(Optional) ntp poll

reach

(Optional) reach

delay

(Optional) delay

vrf

(Optional) vrf name

Command Mode

- /exec

show ntp peers

show ntp peers [ __readonly__ [ { TABLE_peers <PeerIPAddress> <serv_peer> <conf_flag> } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

peers

Show all the peers.

__readonly__

(Optional)

TABLE_peers

(Optional) peers

PeerIPAddress

(Optional) peer Ip addr

serv_peer

(Optional) server or peer

conf_flag

(Optional) configured or dynamic

Command Mode

- /exec

show ntp rts-update

show ntp rts-update [ __readonly__ [ <rtsupdate> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

rts-update

Show if the RTS update is enabled

__readonly__

(Optional)

rtsupdate

(Optional) rts update enabled/disabled

Command Mode

- /exec

show ntp session status

show ntp session status [ __readonly__ [ <session_status> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

session

Show the session information

status

Show the session status

__readonly__

(Optional)

session_status

(Optional) last session status

Command Mode

- /exec

show ntp source-interface

show ntp source-interface [ __readonly__ [ <sourceinterface> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

source-interface

Source interface configured

__readonly__

(Optional)

sourceinterface

(Optional) source interface

Command Mode

- /exec

show ntp source

show ntp source [ __readonly__ [ { TABLE_sourceip <sourceip> } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

source

Source IP address configured

__readonly__

(Optional)

TABLE_sourceip

(Optional) source ip table

sourceip

(Optional) source ip addr

Command Mode

- /exec

show ntp statistics

show ntp statistics { [ io ] | [ local ] | [ memory ] | peer { ipaddr { <ipv4_0> | <ipv6_1> } | name <s0> } } [ __readonly__ [ { <iotimesincereset> <ioreceivebuffers> <iofreereceivebuffers> <iousedreceivebuffers> <iolowwaterrefills> <iodroppedpackets> <ioignoredpackets> <ioreceivedpackets> <iopacketssent> <iopacketsnotsent> <iointerruptshandled> <ioreceivedbyint> } ] [ { <localsystemuptime> <localtimesincereset> <localoldversionpackets> <localnewversionpackets> <localunknownversionnumber> <localbadpacketformat> <localpacketsprocessed> <localbadauthentication> [ <localpacketsrejected> ] } ] [ { <memtimesincereset> <memtotalpeermemory> <memfreepeermemory> <memcallstofindpeer> <memnewpeerallocations> <mempeerdemobilizations> <memhashtablecounts> } ] [ { <peeripremotehost> <peeriplocalinterface> <peeriptimelastreceived> <peeriptimeuntilnextsend> <peeripreachabilitychange> <peerippacketssent> <peerippacketsreceived> <peeripbadauthentication> <peeripbogusorigin> <peeripduplicate> <peeripbaddispersion> <peeripbadreferencetime> <peeripcandidateorder> } ] [ { <peernameremotehost> <peernamelocalinterface> <peernametimelastreceived> <peernametimeuntilnextsend> <peernamereachabilitychange> <peernamepacketssent> <peernamepacketsreceived> <peernamebadauthentication> <peernamebogusorigin> <peernameduplicate> <peernameduplicate> <peernamebaddispersion> <peernamebadreferencetime> <peernamecandidateorder> } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

statistics

Show the NTP statistics

io

(Optional) Show the input-output statistics.

local

(Optional) Show the counters maintained by the local NTP.

memory

(Optional) Show the statistics counters related to memory code.

peer

Show the per-peer statistics counter of a peer.

ipaddr

Peer's IP address

ipv4_0

name

Peer's Name

s0

__readonly__

(Optional)

iotimesincereset

(Optional) time since reset

ioreceivebuffers

(Optional) receive buffers

iofreereceivebuffers

(Optional) free receive buffers

iousedreceivebuffers

(Optional) used receive buffers

iolowwaterrefills

(Optional) low water refills

iodroppedpackets

(Optional) dropped packets

ioignoredpackets

(Optional) ignored packets

ioreceivedpackets

(Optional) received packets

iopacketssent

(Optional) packets sent

iopacketsnotsent

(Optional) packets not sent

iointerruptshandled

(Optional) interrupts handled

ioreceivedbyint

(Optional) received by int

localsystemuptime

(Optional) system up time

localtimesincereset

(Optional) time since reset

localoldversionpackets

(Optional) old version packets

localnewversionpackets

(Optional) new version packets

localunknownversionnumber

(Optional) unknown version number

localbadpacketformat

(Optional) bad packet format

localpacketsprocessed

(Optional) packets processed

localbadauthentication

(Optional) bad authentication

localpacketsrejected

(Optional) packets rejected

memtimesincereset

(Optional) time since reset

memtotalpeermemory

(Optional) total peer memory

memfreepeermemory

(Optional) free peer memory

memcallstofindpeer

(Optional) calls to find peer

memnewpeerallocations

(Optional) new peer allocations

mempeerdemobilizations

(Optional) peer demobilizations

memhashtablecounts

(Optional) hash table counts

peeripremotehost

(Optional) peeripremotehost

peeriplocalinterface

(Optional) peeriplocalinterface

peeriptimelastreceived

(Optional) peeriptimelastreceived

peeriptimeuntilnextsend

(Optional) peeriptimeuntilnextsend

peeripreachabilitychange

(Optional) peeripreachabilitychange

peerippacketssent

(Optional) peerippacketssent

peerippacketsreceived

(Optional) peerippacketsreceived

peeripbadauthentication

(Optional) peeripbadauthentication

peeripbogusorigin

(Optional) peeripbogusorigin

peeripduplicate

(Optional) peeripduplicate

peeripbaddispersion

(Optional) peeripbaddispersion

peeripbadreferencetime

(Optional) peeripbadreferencetime

peeripcandidateorder

(Optional) peeripcandidateorder

peernameremotehost

(Optional) peernameremotehost

peernamelocalinterface

(Optional) peernamelocalinterface

peernametimelastreceived

(Optional) peernametimelastreceived

peernametimeuntilnextsend

(Optional) peernametimeuntilnextsend

peernamereachabilitychange

(Optional) peernamereachabilitychange

peernamepacketssent

(Optional) peernamepacketssent

peernamepacketsreceived

(Optional) peernamepacketsreceived

peernamebadauthentication

(Optional) peernamebadauthentication

peernamebogusorigin

(Optional) peernamebogusorigin

peernameduplicate

(Optional) peernameduplicate

peernamebaddispersion

(Optional) peernamebaddispersion

peernamebadreferencetime

(Optional) peernamebadreferencetime

peernamecandidateorder

(Optional) peernamecandidateorder

Command Mode

- /exec

show ntp status

show ntp status [ __readonly__ [ <distribution> ] [ <operational_state> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

status

Show the NTP distribution status

__readonly__

(Optional)

distribution

(Optional) distribution enabled/disabled

operational_state

(Optional) last operation status

Command Mode

- /exec

show ntp trusted-keys

show ntp trusted-keys [ __readonly__ [ { TABLE_trustkeys <key> } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

trusted-keys

Display trusted keys

__readonly__

(Optional)

TABLE_trustkeys

(Optional) trusted keys

key

(Optional) trusted key

Command Mode

- /exec

show nve bfd neighbors

show nve bfd neighbors [ __readonly__ [ TABLE_nve_bfd_neighbors <if-name> [ { <neighbor-vtep-ip> <neighbor-inner-ip> <neighbor-inner-mac> <neighbor-cc-state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

bfd

BFD

neighbors

neighbors

__readonly__

(Optional)

TABLE_nve_bfd_neighbors

(Optional) BFD neighbors schema

if-name

(Optional) if-name

neighbor-vtep-ip

(Optional) Remote VTEP IP address

neighbor-inner-ip

(Optional) Remote VTEP Inner IP address

neighbor-inner-mac

(Optional) Remote VTEP Inner MAC address

neighbor-cc-state

(Optional) Remote VTEP vPC consistency check state

Command Mode

- /exec

show nve core-links

show nve core-links [ __readonly__ [ TABLE_core_link <if-name> [ { <if-state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

core-links

Core-links

__readonly__

(Optional)

TABLE_core_link

(Optional) xml schema for show nve core-links

if-name

(Optional) core-link interface name

if-state

(Optional) core-link interface oper state

Command Mode

- /exec

show nve ethernet-segment

show nve ethernet-segment [ summary ] [ { esi <esi-id> } ] [ __readonly__ [ TABLE_es { <esi> <if-name> <es-state> [ { <po-state> <nve-if-name> <nve-state> <host-reach-mode> <active-vlans> <df-vlans> <active-vnis> <cc-failed-vlans> <cc-timer-left> <num-es-mem> <local-ordinal> <df-timer-st> <config-status> <df-list> <es-rt-added> <ead-rt-added> <ead-evi-rt-timer-age> } ] } ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

ethernet-segment

Ethernet-segment

summary

(Optional) Ethernet-segment summary

esi

(Optional) ESI Value

esi-id

(Optional) ESI ID

__readonly__

(Optional)

TABLE_es

(Optional) xml schema for show nve ethernet-segment

esi

(Optional) ESI value

if-name

(Optional) port-channel interface name

es-state

(Optional) Ethernet-segment oper state

po-state

(Optional) port-channel interface oper state

nve-if-name

(Optional) NVE interface name

nve-state

(Optional) NVE oper state

host-reach-mode

(Optional) host reach mode

active-vlans

(Optional) Active vlans on ES

df-vlans

(Optional) DF-vlans on ES

active-vnis

(Optional) Active VNIs on ES

cc-failed-vlans

(Optional) Vlans for which consistency check failed

cc-timer-left

(Optional) vlan CC timer status

num-es-mem

(Optional) number of es members

local-ordinal

(Optional) local-ordinal

df-timer-st

(Optional) df election start timer

config-status

(Optional) config state

df-list

(Optional) List of router-ips in DF list

es-rt-added

(Optional) ES route added to L2RIB

ead-rt-added

(Optional) EAD routes added to L2RIB

ead-evi-rt-timer-age

(Optional) EAD/EVI route advertisement timer age

Command Mode

- /exec

show nve interface

show nve interface [ <nve-if> [ detail ] ] [ __readonly__ [ TABLE_nve_if { <if-name> <if-state> <encap-type> <vpc-capability> <local-rmac> <host-reach-mode> <source-if> <primary-ip> <secondary-ip> [ { <src-if-state> <adv-vmac> <nve-flags> <nve-if-handle> <src-if-holddown-tm> <src-if-holdup-tm> <src-if-holddown-left> <vpc-compat-check> <vip-rmac> [ <vip-rmac-ro> ] <sm-state> [ <es-delay-restore-time> <es-delay-restore-time-left> ] [ <multisite-convergence-time> <multisite-convergence-time-left> ] [ <multisite-bgw-if> <multisite-bgw-if-ip> <multisite-bgw-if-admin-state> <multisite-bgw-if-oper-state> <multisite-bgw-if-oper-state-down-reason> ] } ] } ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

interface

Interface

nve-if

(Optional) NVE interface

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_nve_if

(Optional) xml schema for show nve interfaces

if-name

(Optional) interface name

if-state

(Optional) interface oper state

encap-type

(Optional) encap-type

vpc-capability

(Optional) vpc capability

local-rmac

(Optional) local router mac

host-reach-mode

(Optional) host reach mode

adv-vmac

(Optional) advertise virtual rmac

source-if

(Optional) source-interface

primary-ip

(Optional) primary-ip

secondary-ip

(Optional) secondary-ip

src-if-state

(Optional) source-interface state

nve-flags

(Optional) nve-flags

nve-if-handle

(Optional) interface handle

src-if-holddown-tm

(Optional) hold down time

src-if-holdup-tm

(Optional) hold up time

src-if-holddown-left

(Optional) hold down time left

vpc-compat-check

(Optional) vpc-compat-check

sm-state

(Optional) sm state

vip-rmac

(Optional) Generated VIP MAC

vip-rmac-ro

(Optional) Generated VIP MAC Re-origination

es-delay-restore-time

(Optional) es delay restore time

es-delay-restore-time-left

(Optional) es delay restore time left

multisite-convergence-time

(Optional) multisite convergence time

multisite-convergence-time-left

(Optional) multisite convergence time left

multisite-bgw-if

(Optional) multisite border gateway interface

multisite-bgw-if-ip

(Optional) multisite if ip

multisite-bgw-if-admin-state

(Optional) multisite if admin state

multisite-bgw-if-oper-state

(Optional) multisite if oper state

multisite-bgw-if-oper-state-down-reason

(Optional) multisite if oper state down reason

Command Mode

- /exec

show nve multisite dci-links

show nve multisite dci-links [ __readonly__ [ TABLE_multisite_dci_link <if-name> [ { <if-state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

multisite

multisite

dci-links

dci-links

__readonly__

(Optional)

TABLE_multisite_dci_link

(Optional) xml schema for show nve multisite dci-links

if-name

(Optional) dci-link interface name

if-state

(Optional) dci-link interface oper state

Command Mode

- /exec

show nve multisite fabric-links

show nve multisite fabric-links [ __readonly__ [ TABLE_multisite_fabric_link <if-name> [ { <if-state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

multisite

multisite

fabric-links

fabric-links

__readonly__

(Optional)

TABLE_multisite_fabric_link

(Optional) xml schema for show nve multisite fabric-links

if-name

(Optional) fabric-link interface name

if-state

(Optional) fabric-link interface oper state

Command Mode

- /exec

show nve peers

show nve peers [ [ [ interface <nve-if> | peer-ip <user-peer-ip> | control-plane | data-plane ] [ detail ] ] | [ control-plane-vni [ vni <vni-id> | peer-ip <user-peer-ip> ] ] | [ controller ] ] [ __readonly__ TABLE_nve_peers [ [ <detail> ] [ <control-plane-vni> ] [ <if-name> ] [ <peer-ip> ] [ <peer-state> ] [ <learn-type> ] [ <uptime> ] [ <router-mac> ] [ { <first-vni> <create-ts> <config-vnis> <provision-state> <cp-vni> <vni-assignment-mode> <dci-fabric-location> [ <stale-timer> ] } ] [ { <vni> <learn-src> <vni-gw-mac> <peer-type> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

Show peers

interface

(Optional) Interface

nve-if

(Optional) NVE interface

detail

(Optional) Detailed information

peer-ip

(Optional) Show a specific peer

user-peer-ip

(Optional) Remote Peer IP address

control-plane

(Optional) Show peers learned via control plane

data-plane

(Optional) Show peers learned via data plane

control-plane-vni

(Optional) Show details of control plane vnis

vni

(Optional) VNI ID

vni-id

(Optional) Virtual Network Identifier

controller

(Optional) Show peers configured by controller

__readonly__

(Optional)

detail

(Optional) detail

control-plane-vni

(Optional) control-plane-vni

TABLE_nve_peers

(Optional) schema peer

if-name

(Optional) if-name

peer-ip

(Optional) peer-ip

peer-state

(Optional) peer-state

learn-type

(Optional) learn-type

uptime

(Optional) uptime

router-mac

(Optional) router-mac

first-vni

(Optional) first-vni

create-ts

(Optional) create-timestamp

config-vnis

(Optional) config-vnis

provision-state

(Optional) provision-state

cp-vni

(Optional) cp-vni

vni-assignment-mode

(Optional) vni assignment mode

dci-fabric-location

(Optional) dci-fabric-location

stale-timer

(Optional) stale-timer

vni

(Optional) vni value

learn-src

(Optional) learn source

vni-gw-mac

(Optional) vni gateway mac

peer-type

(Optional) peer location wan/fabric

Command Mode

- /exec

show nve peers interface counters

show nve peers <addr> interface <nve-if> counters [ __readonly__ <peer-ip> <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

NVE Peer

addr

Remote Peer IP Address

counters

Counters

interface

Interface

nve-if

NVE interface

__readonly__

(Optional)

peer-ip

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

- /exec

show nve peers vni interface counters

show nve peers { <addr> | all } vni { <vni-id> | all } interface <nve-if> counters [ __readonly__ TABLE_nve_peer_vni_counters <peer-ip> <vni> <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

NVE Peer

addr

Remote Peer IP Address

all

Show counters for all peers/VNIs

vni

Virtual Network Identifier

vni-id

Virtual Network Identifier

counters

Counters

interface

Interface

nve-if

NVE interface

__readonly__

(Optional)

TABLE_nve_peer_vni_counters

(Optional)

peer-ip

(Optional)

vni

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

- /exec

show nve replication-servers

show nve replication-servers [ __readonly__ [ TABLE_nve_replication_servers <if-name> [ { <server-ip> <server-state> <server-ready> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

replication-servers

replication-servers

__readonly__

(Optional)

TABLE_nve_replication_servers

(Optional) replcation servers schema

if-name

(Optional) if-name

server-ip

(Optional) Server IP address

server-state

(Optional) Server reachability state

server-ready

(Optional) Server ready state

Command Mode

- /exec

show nve vni

show nve vni [ { { interface <nve-if> | <vni-id> } [ detail ] } | control-plane | data-plane | summary | controller ] [ __readonly__ [ TABLE_nve_vni [ [ <detail> ] [ <if-name> <vni> <mcast> <vni-state> <mode> <type> <flags> [ { <prvsn-state> <vlan-bd> <svi-state> <vpc-compat-check> } ] ] ] [ [ <summary> ] <cp-vni-count> <cp-vni-up> <cp-vni-down> <dp-vni-count> <dp-vni-up> <dp-vni-down> ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

detail

(Optional) Detailed information

control-plane

(Optional) show vni learned via BGP

data-plane

(Optional) show vni learned via data plane

summary

(Optional) show vni summary

controller

(Optional) show vni configured by controller

__readonly__

(Optional)

TABLE_nve_vni

(Optional) vni schema

detail

(Optional) detail

if-name

(Optional) if-name

vni

(Optional) vni

mcast

(Optional) mcast

vni-state

(Optional) vni-state

mode

(Optional) vni-mode

type

(Optional) vni-type

flags

(Optional) vni-flags

prvsn-state

(Optional) provision-state

vlan-bd

(Optional) vlan-bd

svi-state

(Optional) svi-state

vpc-compat-check

(Optional) vpc-compat-check

summary

(Optional) summary

cp-vni-count

(Optional) CP vni count

cp-vni-up

(Optional) CP vni up count

cp-vni-down

(Optional) CP vni down count

dp-vni-count

(Optional) DP vni count

dp-vni-up

(Optional) DP vni up count

dp-vni-down

(Optional) DP vni down count

Command Mode

- /exec

show nve vni counters

show nve vni <vni-id> counters [ __readonly__ <vni> <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

vni-id

Virtual Network Identifier

counters

Counters

__readonly__

(Optional)

vni

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

- /exec

show nve vni ingress-replication

show nve vni ingress-replication [ { interface <nve-if> | <vni-id> } ] [ __readonly__ [ TABLE_nve_vni_ingr_repl <if-name> <vni> [ { <repl-ip> <source> <up-time> } ] + ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

ingress-replication

ingress-replication

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

__readonly__

(Optional)

TABLE_nve_vni_ingr_repl

(Optional) vni ingress repl schema

if-name

(Optional) if-name

vni

(Optional) vni

repl-ip

(Optional) Replication List

source

(Optional) Source

up-time

(Optional) Up Time

Command Mode

- /exec

show nve vni peer-vtep

show nve vni peer-vtep [ { interface <nve-if> | <vni-id> } ] [ __readonly__ [ TABLE_nve_vni_peer_vtep <if-name> <vni> [ { <vtep-ip> <source> <up-time> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

peer-vtep

Show static peer-vtep configured per vni

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

__readonly__

(Optional)

TABLE_nve_vni_peer_vtep

(Optional) vni peer vtep schema

if-name

(Optional) if-name

vni

(Optional) vni

vtep-ip

(Optional) VTEP List

source

(Optional) Source

up-time

(Optional) Up Time

Command Mode

- /exec

show nve vrf

show nve vrf [ vrf-name ] [ __readonly__ [ TABLE_nve_vrf <vrf-name> <vni> <if-name> <gateway-mac> [ { <ipv4-tblid> <ipv6-tblid> <vni-sw-bd> <flags> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vrf

VRF name

vrf-name

(Optional) vrf name

__readonly__

(Optional)

TABLE_nve_vrf

(Optional) vrf schema

vrf-name

(Optional) vrf-name

vni

(Optional) vni

if-name

(Optional) if-name

gateway-mac

(Optional) gateway-mac

ipv4-tblid

(Optional) ipv4-table-id

ipv6-tblid

(Optional) ipv6-table-id

vni-sw-bd

(Optional) vni-sw-bd

flags

(Optional) flags

Command Mode

- /exec

show nve vxlan-params

show nve vxlan-params [ __readonly__ <vxlan-port> ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vxlan-params

VxLAN Parameters

__readonly__

(Optional)

vxlan-port

(Optional) vxlan-params

Command Mode

- /exec

show nxapi-server logs

show nxapi-server logs

Syntax Description

show

Show running system information

nxapi-server

Show NX-API Server

logs

Show NX-API Server logs

Command Mode

- /exec

show nxapi

show nxapi [ __readonly__ <nxapi_status> [ configuration_error <c_error> ] [ <http_port> ] [ <https_port> ] ]

Syntax Description

show

Show running system information

nxapi

Show nxapi status

__readonly__

(Optional)

nxapi_status

(Optional) NX-API enabled status

configuration_error

(Optional) config syntax error

c_error

(Optional) confg syntax error

http_port

(Optional) Configured HTTP port

https_port

(Optional) Configured HTTPS port

Command Mode

- /exec

Chapter 15. O Show Commands

- show object-group

- show openflow hardware capabilities

- show openflow switch

- show openflow switch flows

- show ospfv3

- show ospfv3 border-routers

- show ospfv3 database

- show ospfv3 database database-summary

- show ospfv3 database detail

- show ospfv3 event-history

- show ospfv3 event-history detail

- show ospfv3 ha

- show ospfv3 interface

- show ospfv3 interface brief

- show ospfv3 lsa-content-changed-list

- show ospfv3 memory

- show ospfv3 neighbors

- show ospfv3 neighbors detail

- show ospfv3 neighbors summary

- show ospfv3 policy statistics

- show ospfv3 request-list

- show ospfv3 retransmission-list

- show ospfv3 route

- show ospfv3 route summary

- show ospfv3 statistics

- show ospfv3 summary-address

- show ospfv3 traffic

- show ospfv3 virtual-links

- show ospfv3 virtual-links brief

show object-group

show object-group [ <name> ] [ __readonly__ TABLE_ogroup <group_type> <group_name> [ TABLE_seqno <seqno> { <_port_op> <port0_num> | <_port_range> <port1_num> <port2_num> | <hostaddr> | <net_ip> | <mask_ip_addr> <mask_ip_mask> | <hostipv6> | <net_ipv6> | <mask_ipv6_addr> <mask_ipv6_mask> } ] ]

Syntax Description

show

Show running system information

object-group

Show configured ACL object groups

name

(Optional) object-group name

__readonly__

(Optional)

group_type

(Optional) Object group type

group_name

(Optional) Object group name

seqno

(Optional) Sequence number

TABLE_ogroup

(Optional)

TABLE_seqno

(Optional)

_port_op

(Optional) Port operator

_port_range

(Optional) Port range

port0_num

(Optional) Port number

port1_num

(Optional) Port number

port2_num

(Optional) Port number

net_ip

(Optional) A.B.C.D Network address of object-group member

hostaddr

(Optional) A.B.C.D Host address

mask_ip_addr

(Optional) A.B.C.D IP address

mask_ip_mask

(Optional) A.B.C.D IP address mask

Command Mode

- /exec

show openflow hardware capabilities

show openflow hardware capabilities [ pipeline <pipeline-id> ]

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

hardware

Hardware

capabilities

Capabilities

pipeline

(Optional) Pipeline id

pipeline-id

(Optional) Pipeline id

Command Mode

- /exec

show openflow switch

show openflow switch <switch-id> [ { controllers [ stats | { role { master | slave | equal } } ] | ports } ] [ __readonly__ <cli_output> <ctrlv4> <ctrlport> ]

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

switch

Logical switch id

switch-id

Logical switch-id to enter

controllers

(Optional) Controllers

stats

(Optional) Stats

ports

(Optional) Ports

role

(Optional) Controller role

master

(Optional) Master

slave

(Optional) Slave

equal

(Optional) Equal

__readonly__

(Optional)

cli_output

(Optional)

ctrlv4

(Optional)

ctrlport

(Optional)

Command Mode

- /exec

show openflow switch flows

show openflow switch <switch-id> flows [ [ table-id <table-id> ] [ [ pending | pending-del | controller | configured | default | fixed ] [ brief | list | summary ] ] | stats ]

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

switch

Logical switch id

switch-id

Logical switch-id to enter

flows

Flows

brief

(Optional) Brief

summary

(Optional) Summary

pending

(Optional) Pending

pending-del

(Optional) Pending delete

controller

(Optional) Controller

configured

(Optional) Configured

default

(Optional) Default

fixed

(Optional) Fixed

stats

(Optional) Stats

table-id

(Optional) Table-id for the pipeline

list

(Optional) List

table-id

(Optional) Table ID

Command Mode

- /exec

show ospfv3

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <instance_number> <cname> <rid> <stateful_ha> <gr_ha> [ [ <gr_planned_only> ] [ <gr_notify_period> ] [ <gr_grace_period> ] [ <gr_state> ] [ <gr_last_status> ] ] [ <gr_helper_mode> ] <support_tos0_only> <support_opaque_lsa> [ <low_mem_cond> ] <is_abr> <is_asbr> [ <max_lsa_non_self_number> ] [ <max_lsa_state> ] [ <max_lsa_warning_only> ] [ <max_lsa_current_non_self_lsa_number> ] [ <max_lsa_threshold_pct> ] [ <max_lsa_ignore_time> ] [ <max_lsa_reset_time> ] [ <max_lsa_ignore_count> ] [ <max_lsa_current_ignore_count> ] [ <max_lsa_ignore_time_left> ] [ <max_lsa_reset_time_left> ] [ <max_lsa_permanent_ignore> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] [ { TABLE_redist <proto> [ <max_lsas> ] [ <warning> ] [ <threshold> ] [ <current_count> ] } ] <admin_dist> <ref_bw> <spf_start_time> <spf_hold_time> <spf_max_time> <lsa_start_time> <lsa_hold_time> <lsa_max_time> <min_lsa_arr_time> <lsa_aging_pace> <spf_max_paths> <max_metric_adver> [ [ <max_metric_time_left> ] [ <max_metric_wait_bgp> ] [ <max_metric_timeout> ] [ <max_metric_always> ] [ <max_metric_sum_lsa> ] [ <max_metric_ext_lsa> ] ] <asext_lsa_cnt> <asext_lsa_crc> <area_total> <area_normal> <area_stub> <area_nssa> <act_area_total> <act_area_normal> <act_area_stub> <act_area_nssa> <no_discard_rt_ext> <no_discard_rt_int> [ <bfd_enabled> ] [ <passive_dflt> ] [ <name_lookup> ] [ { TABLE_area <aname> [ <backbone_active> ] [ <active> ] <age> <total_intf> <act_intf> <passive_intf> <loopback_intf> [ <gr_nbr_cnt> ] <stub> [ <stub_def_cost> ] <nssa> [ <no_redist> ] [ <nssa_trans> ] <no_summary> <spf_runs> <last_spf_run_time> [ <rtr_lsa_throt> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] [ TABLE_range <addr> <masklen> <state> <nets> <advertise> [ <cost> ] ] [ <filter_in> ] [ <filter_out> ] <lsa_cnt> <lsa_crc> } ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

instance_number

(Optional)

cname

(Optional)

rid

(Optional)

stateful_ha

(Optional)

gr_ha

(Optional)

gr_planned_only

(Optional)

gr_notify_period

(Optional)

gr_grace_period

(Optional)

gr_state

(Optional)

gr_last_status

(Optional)

gr_helper_mode

(Optional)

support_tos0_only

(Optional)

support_opaque_lsa

(Optional)

low_mem_cond

(Optional)

is_abr

(Optional)

is_asbr

(Optional)

max_lsa_non_self_number

(Optional)

max_lsa_state

(Optional)

max_lsa_warning_only

(Optional)

max_lsa_current_non_self_lsa_number

(Optional)

max_lsa_threshold_pct

(Optional)

max_lsa_ignore_time

(Optional)

max_lsa_reset_time

(Optional)

max_lsa_ignore_count

(Optional)

max_lsa_current_ignore_count

(Optional)

max_lsa_ignore_time_left

(Optional)

max_lsa_reset_time_left

(Optional)

max_lsa_permanent_ignore

(Optional)

ipsec_sa_type

(Optional) IPsec SA Type

ipsec_sa_algorithm

(Optional) IPsec SA Algorithm name

ipsec_sa_spi

(Optional) IPsec SA SPI Value

TABLE_redist

(Optional)

proto

(Optional)

max_lsas

(Optional)

warning

(Optional)

threshold

(Optional)

current_count

(Optional)

admin_dist

(Optional)

ref_bw

(Optional)

spf_start_time

(Optional)

spf_hold_time

(Optional)

spf_max_time

(Optional)

lsa_start_time

(Optional)

lsa_hold_time

(Optional)

lsa_max_time

(Optional)

min_lsa_arr_time

(Optional)

lsa_aging_pace

(Optional)

spf_max_paths

(Optional)

max_metric_adver

(Optional)

max_metric_time_left

(Optional)

max_metric_wait_bgp

(Optional)

max_metric_timeout

(Optional)

max_metric_always

(Optional)

max_metric_sum_lsa

(Optional)

max_metric_ext_lsa

(Optional)

asext_lsa_cnt

(Optional)

asext_lsa_crc

(Optional)

area_total

(Optional)

area_normal

(Optional)

area_stub

(Optional)

area_nssa

(Optional)

act_area_total

(Optional)

act_area_normal

(Optional)

act_area_stub

(Optional)

act_area_nssa

(Optional)

bfd_enabled

(Optional)

passive_dflt

(Optional)

name_lookup

(Optional)

no_discard_rt_ext

(Optional)

no_discard_rt_int

(Optional)

TABLE_area

(Optional)

aname

(Optional)

backbone_active

(Optional)

active

(Optional)

age

(Optional)

total_intf

(Optional)

act_intf

(Optional)

passive_intf

(Optional)

loopback_intf

(Optional)

gr_nbr_cnt

(Optional)

stub

(Optional)

stub_def_cost

(Optional)

nssa

(Optional)

no_redist

(Optional)

nssa_trans

(Optional)

no_summary

(Optional)

spf_runs

(Optional)

last_spf_run_time

(Optional)

rtr_lsa_throt

(Optional)

ipsec_sa_type

(Optional) IPsec SA Type

ipsec_sa_algorithm

(Optional) IPsec SA Algorithm name

ipsec_sa_spi

(Optional) IPsec SA SPI Value

TABLE_range

(Optional)

masklen

(Optional)

state

(Optional)

nets

(Optional)

advertise

(Optional)

cost

(Optional)

filter_in

(Optional)

filter_out

(Optional)

lsa_cnt

(Optional)

lsa_crc

(Optional)

Command Mode

- /exec

show ospfv3 border-routers

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] border-routers [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_br <type> <addr> <cost> <asbr> <abr> <area> <spf_inst> [ <vlink_unresolved> ] [ TABLE_br_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] ] [ TABLE_br_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

border-routers

Border routers

all_routes

(Optional) Display all OSPFv3 routes

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_br

(Optional)

type

(Optional)

addr

(Optional)

cost

(Optional)

asbr

(Optional)

abr

(Optional)

area

(Optional)

spf_inst

(Optional)

vlink_unresolved

(Optional)

TABLE_br_ubest_nh

(Optional)

ubest_nh_intf

(Optional)

TABLE_br_mbest_nh

(Optional)

mbest_nh_intf

(Optional)

Command Mode

- /exec

show ospfv3 database

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ [ [ [ router | network | intra-area-prefix | inter-area { irouter | iprefix } | nssa-external | area-unknown | [ [ { link | link-unknown | grace } [ <interface> ] ] ] ] [ area <area-id-ip> ] ] | external [ tag <tag_val> ] | as-unknown ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db3_lsa [ <name> ] [ <area> ] [ <id> ] [ <advrtr> ] [ <age> ] [ <seqno> ] [ <corrupt> ] [ <rtr_num_links> ] [ <net_num_rtr> ] [ <prefix> ] [ <inter_rid> ] [ <link_if> ] [ <intra_ref_type> ] [ <intra_ref_lsid> ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

router

(Optional) Display router LSAs

network

(Optional) Display network LSAs

inter-area

(Optional) Display inter-area LSAs

iprefix

(Optional) Display Inter-Area-Prefix LSAs

irouter

(Optional) Display Inter-Area-Router LSAs

nssa-external

(Optional) Display NSSA-external LSAs

area-unknown

(Optional) Display area-scope unknown LSAs

external

(Optional) Display AS-external LSAs

as-unknown

(Optional) Display as-scope unknown LSAs

grace

(Optional) Display Grace LSAs

link

(Optional) Display Link LSAs

link-unknown

(Optional) Display link-scope unknown LSAs

interface

(Optional) OSPF enabled interface

intra-area-prefix

(Optional) Display Intra-Area-Prefix LSAs

self-originated

(Optional) Display only self-originated LSAs

lsid

(Optional) Restrict display by link state ID

adv-router

(Optional) Restrict display by Advertising router

advid

(Optional) Advertising router ID

adv-router-name

(Optional) Restrict display by Advertising router name

adv-name

(Optional) DNS Name of the Advertising router

area

(Optional) Display only LSA's in this area

area-id-ip

(Optional) Area Id as an integer or ip address

tag

(Optional) Restrict display by tag

tag_val

(Optional) 32-bit tag value

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_db3_lsa

(Optional)

name

(Optional)

area

(Optional)

id

(Optional)

advrtr

(Optional)

age

(Optional)

seqno

(Optional)

corrupt

(Optional)

rtr_num_links

(Optional)

net_num_rtr

(Optional)

inter_rid

(Optional)

link_if

(Optional)

intra_ref_type

(Optional)

intra_ref_lsid

(Optional)

Command Mode

- /exec

show ospfv3 database database-summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database database-summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_dbsum [ TABLE_dbsum_area <area> [ TABLE_dbsum_area_lsa <area_lsa_name> <area_lsa_count> ] <area_lsa_total> ] [ TABLE_dbsum_all [ TABLE_dbsum_lsa_all <lsa_name> <lsa_count> ] <non_self_lsa_total> <lsa_total> ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

database-summary

Summary of database

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_dbsum

(Optional)

TABLE_dbsum_area

(Optional)

area

(Optional)

TABLE_dbsum_area_lsa

(Optional)

area_lsa_name

(Optional)

area_lsa_count

(Optional)

area_lsa_total

(Optional)

TABLE_dbsum_all

(Optional)

TABLE_dbsum_lsa_all

(Optional)

lsa_name

(Optional)

lsa_count

(Optional)

non_self_lsa_total

(Optional)

lsa_total

(Optional)

Command Mode

- /exec

show ospfv3 database detail

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ [ [ router | network | intra-area-prefix | inter-area { irouter | iprefix } | nssa-external | area-unknown | [ [ { link | link-unknown | grace } [ <interface> ] ] ] ] [ area <area-id-ip> ] ] | external [ tag <tag_val> ] | as-unknown ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db3_lsa [ <name> ] [ <area> ] [ TABLE_lsdb <age> <maxage> <wrapping> <dummy> <flush_pending> <type> [ <intf> ] <id> <advrtr> <seqno> <cksum> <len> [ <corrupt> ] [ <rtr_abr> ] [ <rtr_asbr> ] [ <rtr_translate> ] [ <rtr_vlink_end> ] [ <rtr_options> ] [ <rtr_num_links> ] [ TABLE_rlsa [ <rtr_link_type> ] [ <rtr_link_metric> ] [ <rtr_link_ifid> ] [ <rtr_link_nbr_ifid> ] [ <rtr_link_nbr_rid> ] ] [ <net_options> ] [ TABLE_nlsa [ <net_rtr> ] ] [ <ia_prefix> ] [ <ia_prefix_options> ] [ <ia_prefix_metric> ] [ <ia_rtr_options> ] [ <ia_rtr_metric> ] [ <ia_rtr_rid> ] [ <asext_prefix> ] [ <asext_options> ] [ <asext_metric_type2> ] [ <asext_metric> ] [ <asext_fwd_addr> ] [ <asext_tag> ] [ <asext_ref_lstype> ] [ <asext_ref_lsid> ] [ <link_priority> ] [ <link_options> ] [ <link_laddr> ] [ <link_num_prefix> ] [ TABLE_linklsa [ <link_prefix> ] [ <link_prefix_options> ] ] [ <intra_num_prefix> ] [ <intra_ref_lstype> ] [ <intra_ref_lsid> ] [ <intra_ref_advrtr> ] [ TABLE_iaplsa [ <intra_prefix> ] [ <intra_prefix_options> ] [ <intra_prefix_metric> ] [ <corrupted_length> ] ] [ <tlv_type> ] [ <tlv_len> ] [ <tlv_data> ] [ <tlv_unknown> ] [ <gr_interval> ] [ <gr_reason> ] [ <unknown> ] [ <data_len> ] [ <data> ] ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

router

(Optional) Display router LSAs

network

(Optional) Display network LSAs

inter-area

(Optional) Display inter-area LSAs

iprefix

(Optional) Display Inter-Area-Prefix LSAs

irouter

(Optional) Display Inter-Area-Router LSAs

nssa-external

(Optional) Display NSSA-external LSAs

area-unknown

(Optional) Display area-scope unknown LSAs

external

(Optional) Display AS-external LSAs

as-unknown

(Optional) Display as-scope unknown LSAs

grace

(Optional) Display Grace LSAs

link

(Optional) Display Link LSAs

link-unknown

(Optional) Display link-scope unknown LSAs

interface

(Optional) OSPF enabled interface

intra-area-prefix

(Optional) Display Intra-Area-Prefix LSAs

self-originated

(Optional) Display only self-originated LSAs

lsid

(Optional) Restrict display by link state ID

adv-router

(Optional) Restrict display by Advertising router

advid

(Optional) Advertising router ID

adv-router-name

(Optional) Restrict display by Advertising router name

adv-name

(Optional) DNS Name of the Advertising router

area

(Optional) Display only LSA's in this area

area-id-ip

(Optional) Area Id as an integer or ip address

tag

(Optional) Restrict display by tag

tag_val

(Optional) 32-bit tag value

detail

Display LSA in detail

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_db3_lsa

(Optional)

name

(Optional)

area

(Optional)

TABLE_lsdb

(Optional)

age

(Optional)

maxage

(Optional)

wrapping

(Optional)

dummy

(Optional)

flush_pending

(Optional)

type

(Optional)

intf

(Optional)

id

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

len

(Optional)

corrupt

(Optional)

rtr_abr

(Optional)

rtr_asbr

(Optional)

rtr_translate

(Optional)

rtr_vlink_end

(Optional)

rtr_options

(Optional)

rtr_num_links

(Optional)

TABLE_rlsa

(Optional)

rtr_link_type

(Optional)

rtr_link_metric

(Optional)

rtr_link_ifid

(Optional)

rtr_link_nbr_ifid

(Optional)

rtr_link_nbr_rid

(Optional)

net_options

(Optional)

TABLE_nlsa

(Optional)

net_rtr

(Optional)

ia_prefix_options

(Optional)

ia_prefix_metric

(Optional)

ia_rtr_options

(Optional)

ia_rtr_metric

(Optional)

ia_rtr_rid

(Optional)

asext_options

(Optional)

asext_metric_type2

(Optional)

asext_metric

(Optional)

asext_tag

(Optional)

asext_ref_lstype

(Optional)

asext_ref_lsid

(Optional)

link_priority

(Optional)

link_options

(Optional)

link_num_prefix

(Optional)

TABLE_linklsa

(Optional)

link_prefix_options

(Optional)

intra_num_prefix

(Optional)

intra_ref_lstype

(Optional)

intra_ref_lsid

(Optional)

intra_ref_advrtr

(Optional)

TABLE_iaplsa

(Optional)

intra_prefix_options

(Optional)

intra_prefix_metric

(Optional)

corrupted_length

(Optional)

tlv_type

(Optional)

tlv_len

(Optional)

tlv_data

(Optional)

tlv_unknown

(Optional)

gr_interval

(Optional)

gr_reason

(Optional)

unknown

(Optional)

data_len

(Optional)

data

(Optional)

Command Mode

- /exec

show ospfv3 event-history

show ospfv3 [ <tag> ] [ internal ] event-history { errors | msgs | statistics | adjacency | event | ha | flooding | lsa | spf | redistribution | hello | spf-trigger | cli | rib }

Syntax Description

show

Show running system information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Show various event logs of OSPF

errors

Error logs

msgs

IPC logs

statistics

Show the state and size of the buffers

adjacency

Adjacency formation logs

event

Internal event logs

ha

HA and GR logs

flooding

LSA flooding logs

lsa

LSA generation and databse logs

spf

SPF calculation logs

redistribution

Redistribution logs

hello

Hello related logs

spf-trigger

SPF TRIGGER related logs

cli

Cli logs

rib

RIB related logs

Command Mode

- /exec

show ospfv3 event-history detail

show ospfv3 [ <tag> ] [ internal ] event-history detail [ statistics ]

Syntax Description

show

Show running system information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Show event history of OSPF

detail

Show detailed event history information

statistics

(Optional) Show the state and size of the verbose history buffer

Command Mode

- /exec

show ospfv3 ha

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ha [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <stateful> <pss_restored> <pss_state> <gr_enabled> <gr_grace_period> <gr_state> <gr_last_status> <gr_helper_mode> ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ha

High Availability status

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

stateful

(Optional)

pss_restored

(Optional)

pss_state

(Optional)

gr_enabled

(Optional)

gr_grace_period

(Optional)

gr_state

(Optional)

gr_last_status

(Optional)

gr_helper_mode

(Optional)

Command Mode

- /exec

show ospfv3 interface

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_intf <ifname> <admin_status> <proto_status> <addr> [ <masklen> ] [ <inst_id> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> [ <bfd_enabled> ] <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

OSPF enabled interface

interface

(Optional) OSPF enabled interface

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

admin_status

(Optional)

proto_status

(Optional)

masklen

(Optional)

inst_id

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

bfd_enabled

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

bdr_rid

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

ipsec_sa_type

(Optional) IPsec SA Type

ipsec_sa_algorithm

(Optional) IPsec SA Algorithm name

ipsec_sa_spi

(Optional) IPsec SA SPI Value

Command Mode

- /exec

show ospfv3 interface brief

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <intf_count> TABLE_intf <ifname> <index> <area> <cost> <state_str> <nbr_total> <admin_status> ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

OSPF enabled interface

brief

Display summary of OSPFv3 interfaces

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

intf_count

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

index

(Optional)

area

(Optional)

cost

(Optional)

state_str

(Optional)

nbr_total

(Optional)

admin_status

(Optional)

Command Mode

- /exec

show ospfv3 lsa-content-changed-list

show [ ipv6 ] ospfv3 [ <tag> ] lsa-content-changed-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lschg <nbr_rid> <intf> <nbr_addr> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

lsa-content-changed-list

LSAs that changed contents

interface

OSPF enabled interface

ip-addr

Neighbor router ID

neighbor-name

DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_lschg

(Optional)

nbr_rid

(Optional)

intf

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ospfv3 memory

show [ ipv6 ] ospfv3 [ <tag> ] memory [ __readonly__ TABLE_mem <ptag> <byte_total> <byte_consumed> <byte_overhead> <byte_allocated> <alloc_current> <alloc_created> <alloc_failed> <alloc_free> <bf_current> <bf_created> <bf_failed> <bf_free> <bf_byte_consumed> <bf_32_current> <bf_32_created> <bf_32_failed> <bf_32_free> <bf_32_byte_consumed> <slab_current> <slab_created> <slab_failed> <slab_free> <slab_byte_consumed> <if_index_alloc_failed> <nbr_index_alloc_failed> ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

memory

Memory usage statistics

__readonly__

(Optional)

TABLE_mem

(Optional)

ptag

(Optional)

byte_total

(Optional)

byte_consumed

(Optional)

byte_overhead

(Optional)

byte_allocated

(Optional)

alloc_current

(Optional)

alloc_created

(Optional)

alloc_failed

(Optional)

alloc_free

(Optional)

bf_current

(Optional)

bf_created

(Optional)

bf_failed

(Optional)

bf_free

(Optional)

bf_byte_consumed

(Optional)

bf_32_current

(Optional)

bf_32_created

(Optional)

bf_32_failed

(Optional)

bf_32_free

(Optional)

bf_32_byte_consumed

(Optional)

slab_current

(Optional)

slab_created

(Optional)

slab_failed

(Optional)

slab_free

(Optional)

slab_byte_consumed

(Optional)

if_index_alloc_failed

(Optional)

nbr_index_alloc_failed

(Optional)

Command Mode

- /exec

show ospfv3 neighbors

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ { { <interface> [ <neighbor> | <neighbor-name> ] } | { [ <neighbor> | <neighbor-name> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } ] [ __readonly__ TABLE_ctx <ptag> <cname> <nbrcount> [ TABLE_nbr <rid> <priority> <state> <drstate> <uptime> <ifid> <intf> [ <multiarea> ] <addr> ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

neighbor

(Optional) Router ID of neighbor

neighbor-name

(Optional) DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

nbrcount

(Optional)

TABLE_nbr

(Optional)

rid

(Optional)

priority

(Optional)

state

(Optional)

drstate

(Optional)

uptime

(Optional)

ifid

(Optional)

intf

(Optional)

multiarea

(Optional)

Command Mode

- /exec

show ospfv3 neighbors detail

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ <interface> ] [ <neighbor> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_nbr <rid> <addr> <area> <intf> <state> <transition> <lastchange> [ <bfd_state> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] <helloptions> <dbdoptions> <lastnonhello> [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

neighbor

(Optional) Router ID of neighbor

detail

Show detailed neighbor display

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_nbr

(Optional)

rid

(Optional)

area

(Optional)

intf

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

bfd_state

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

Command Mode

- /exec

show ospfv3 neighbors summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ <interface> ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> TABLE_intf { <ifname> | <total> } <down> <attempt> <init> <twoway> <exstart> <exchange> <loading> <full> <if_total> ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

summary

Summary of neighbors

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

total

(Optional)

down

(Optional)

attempt

(Optional)

init

(Optional)

twoway

(Optional)

exstart

(Optional)

exchange

(Optional)

loading

(Optional)

full

(Optional)

if_total

(Optional)

Command Mode

- /exec

show ospfv3 policy statistics

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] policy statistics { { redistribute { bgp <as> | { isis | rip } <tag> | static | direct | amt } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

policy

Display Policy related information

statistics

Display Route Filter statistics

redistribute

Statistics for redistribution

rip

Routing Information Protocol (RIP)

isis

ISO Intermediate-to-Intermediate (IS-IS)

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

static

Static

direct

Directly connected

amt

AMT anycast prefix

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

in

Filter networks sent to this area

out

Filter networks sent from this area

tag

Command Mode

- /exec

show ospfv3 request-list

show [ ipv6 ] ospfv3 [ <tag> ] request-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lsreq <nbr_rid> <intf> <nbr_addr> <total> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

request-list

Link state request list

interface

OSPF enabled interface

ip-addr

Neighbor router ID

neighbor-name

DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_lsreq

(Optional)

nbr_rid

(Optional)

intf

(Optional)

total

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ospfv3 retransmission-list

show [ ipv6 ] ospfv3 [ <tag> ] retransmission-list { <routerid> | <router-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_rxmit <nbr_rid> <intf> <nbr_addr> [ <timer_running> ] [ <timer_due> ] [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

retransmission-list

Link state retransmission list

routerid

Neighbor router ID

router-name

DNS Name of the router

interface

OSPF enabled interface

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_rxmit

(Optional)

nbr_rid

(Optional)

intf

(Optional)

timer_running

(Optional)

timer_due

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ospfv3 route

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] route [ <ipv6-prefix> [ longer-prefixes ] ] [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ <hdr_addr> ] [ <hdr_masklen> ] [ TABLE_route <addr> <masklen> <type> <in_rib> <direct> [ <area> ] [ <tag> ] [ <vlink_unresolved> ] [ TABLE_route_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] [ <ubest_cost> ] [ <distance> ] [ <ubest_nh_direct> ] [ <ubest_nh_in_rib> ] ] [ TABLE_route_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] [ <mbest_cost> ] [ <mbest_nh_direct> ] [ <mbest_nh_in_rib> ] ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Internal OSPF routes

longer-prefixes

(Optional) Show exact match and more specific routes

all_routes

(Optional) Display all OSPFv3 routes

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

hdr_masklen

(Optional)

TABLE_route

(Optional)

masklen

(Optional)

type

(Optional)

in_rib

(Optional)

direct

(Optional)

area

(Optional)

vlink_unresolved

(Optional)

TABLE_route_ubest_nh

(Optional)

ubest_nh_intf

(Optional)

ubest_cost

(Optional)

distance

(Optional)

ubest_nh_direct

(Optional)

ubest_nh_in_rib

(Optional)

TABLE_route_mbest_nh

(Optional)

mbest_nh_intf

(Optional)

mbest_cost

(Optional)

mbest_nh_direct

(Optional)

mbest_nh_in_rib

(Optional)

Command Mode

- /exec

show ospfv3 route summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] route [ <ipv6-prefix> [ longer-prefixes ] ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_route <total_routes> <total_paths> [ TABLE_route_type <path_type> <path_routes> <path_paths> ] [ TABLE_route_masklen <masklen> <masklen_routes> <masklen_paths> ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Internal OSPF routes

longer-prefixes

(Optional) Show exact match and more specific routes

summary

Show route counts

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_route

(Optional)

total_routes

(Optional)

total_paths

(Optional)

TABLE_route_type

(Optional)

path_type

(Optional)

path_routes

(Optional)

path_paths

(Optional)

TABLE_route_masklen

(Optional)

masklen

(Optional)

masklen_routes

(Optional)

masklen_paths

(Optional)

Command Mode

- /exec

show ospfv3 statistics

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_stats <ptag> <cname> <last_clear> <rid_change> <dr_elections> <older_lsa_recv> <nbr_state_change> <nbr_dead_postpone> <nbr_dead_expire> <nbr_bad_lsreq> <nbr_seqno_mismatch> <spf_full> <spf_summary> <spf_external> <spf_extsummary> <rtr_generate> <rtr_refresh> <rtr_flush> <rtr_other_flush> <net_generate> <net_refresh> <net_flush> <net_other_flush> <inter_prefix_generate> <inter_prefix_refresh> <inter_prefix_flush> <inter_prefix_other_flush> <inter_router_generate> <inter_router_refresh> <inter_router_flush> <inter_router_other_flush> <asext_generate> <asext_refresh> <asext_flush> <asext_other_flush> <link_generate> <link_refresh> <link_flush> <link_other_flush> <intra_prefix_generate> <intra_prefix_refresh> <intra_prefix_flush> <intra_prefix_other_flush> <unknown_generate> <unknown_refresh> <unknown_flush> <unknown_other_flush> <limbo_lsa_count> <limbo_lsa_hwm> <limbo_lsa_deleted> <limbo_lsa_revived> <limbo_runs> <limbo_lsa_last_time_hwm> [ <limbo_timer> ] <helloq_size> <helloq_max_size> <helloq_hwm> <helloq_drops> <helloq_last_hwm_time> <floodq_size> <floodq_max_size> <floodq_hwm> <floodq_drops> <floodq_last_hwm_time> <lsdb_add_fail> [ TABLE_buffer_detail [ <buf_size> ] [ <buf_size_huge> ] <buf_in_use> <buf_hwm> <buf_perm> <buf_alloc> <buf_free> ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Event counters

__readonly__

(Optional)

TABLE_stats

(Optional)

ptag

(Optional)

cname

(Optional)

last_clear

(Optional)

rid_change

(Optional)

dr_elections

(Optional)

older_lsa_recv

(Optional)

nbr_state_change

(Optional)

nbr_dead_postpone

(Optional)

nbr_dead_expire

(Optional)

nbr_bad_lsreq

(Optional)

nbr_seqno_mismatch

(Optional)

spf_full

(Optional)

spf_summary

(Optional)

spf_external

(Optional)

spf_extsummary

(Optional)

rtr_generate

(Optional)

rtr_refresh

(Optional)

rtr_flush

(Optional)

rtr_other_flush

(Optional)

net_generate

(Optional)

net_refresh

(Optional)

net_flush

(Optional)

net_other_flush

(Optional)

inter_prefix_generate

(Optional)

inter_prefix_refresh

(Optional)

inter_prefix_flush

(Optional)

inter_prefix_other_flush

(Optional)

inter_router_generate

(Optional)

inter_router_refresh

(Optional)

inter_router_flush

(Optional)

inter_router_other_flush

(Optional)

asext_generate

(Optional)

asext_refresh

(Optional)

asext_flush

(Optional)

asext_other_flush

(Optional)

link_generate

(Optional)

link_refresh

(Optional)

link_flush

(Optional)

link_other_flush

(Optional)

intra_prefix_generate

(Optional)

intra_prefix_refresh

(Optional)

intra_prefix_flush

(Optional)

intra_prefix_other_flush

(Optional)

unknown_generate

(Optional)

unknown_refresh

(Optional)

unknown_flush

(Optional)

unknown_other_flush

(Optional)

limbo_lsa_count

(Optional)

limbo_lsa_hwm

(Optional)

limbo_lsa_deleted

(Optional)

limbo_lsa_revived

(Optional)

limbo_runs

(Optional)

limbo_lsa_last_time_hwm

(Optional)

limbo_timer

(Optional)

helloq_size

(Optional)

helloq_max_size

(Optional)

helloq_hwm

(Optional)

helloq_drops

(Optional)

helloq_last_hwm_time

(Optional)

floodq_size

(Optional)

floodq_max_size

(Optional)

floodq_hwm

(Optional)

floodq_drops

(Optional)

floodq_last_hwm_time

(Optional)

lsdb_add_fail

(Optional)

TABLE_buffer_detail

(Optional)

buf_size

(Optional)

buf_size_huge

(Optional)

buf_in_use

(Optional)

buf_hwm

(Optional)

buf_perm

(Optional)

buf_alloc

(Optional)

buf_free

(Optional)

Command Mode

- /exec

show ospfv3 summary-address

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] summary-address [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ctx <ptag> <cname> <rid> [ TABLE_sum <addr> <masklen> [ <metric> ] [ <tag> ] [ <pending> ] ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

summary-address

Summary-address redistribution information

private

(Optional) Developer-only statistics

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

rid

(Optional)

TABLE_sum

(Optional)

masklen

(Optional)

metric

(Optional)

pending

(Optional)

Command Mode

- /exec

show ospfv3 traffic

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> [ detail ] | [ detail ] | [ detail ] vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_traf <ptag> <cname> <last_clear> [ <ifname> ] <pkt_in> <pkt_out> <lsu_first_trans> <lsu_retrans> <lsu_for_lsreq> <lsu_nbr_trans> <throttle_out> <throttle_out_token> <throttle_out_ip> <lsa_ignored> <lsa_dropped_spf> <lsa_dropped_gr> <pkt_drops_in> <pkt_drops_out> <pkt_errors_in> <pkt_errors_out> <hello_errors_in> <dbds_errors_in> <lsreqs_errors_in> <lsus_errors_in> <lsacks_errors_in> <pkt_unknown_in> <pkt_unknown_out> <pkt_no_ospf_intf> <bad_version> <bad_crc> <dup_rtr_id> <dup_src_addr> <invalid_src_addr> <invalid_dst_addr> <non_existing_nbr> <pkt_passive_intf> <wrong_area> <invalid_pkt_len> <nbr_changed_routerid_ipaddr> <nbr_changed_interfaceid> [ <bad_auth> ] [ <bad_reserved> ] [ <pkt_no_vrf> ] <hellos_in> <dbds_in> <lsreqs_in> <lsus_in> <lsacks_in> <hellos_out> <dbds_out> <lsreqs_out> <lsus_out> <lsacks_out> [ <hellos_in_hq> <dbds_in_hq> <lsreqs_in_flq> <lsus_in_flq> <lsacks_in_flq> <lsas_in_dbds_in> <lsas_in_lsreqs_in> <lsas_in_lsus_in> <lsas_in_lsacks_in> <lsas_in_dbds_out> <lsas_in_lsreqs_out> <lsas_in_lsus_out> <lsas_in_lsacks_out> <lsas_in_rxmt_lsus_out> ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

interface

(Optional) OSPF enabled interface

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Packet counters

__readonly__

(Optional)

TABLE_traf

(Optional)

ptag

(Optional)

cname

(Optional)

last_clear

(Optional)

ifname

(Optional)

pkt_in

(Optional)

pkt_out

(Optional)

lsu_first_trans

(Optional)

lsu_retrans

(Optional)

lsu_for_lsreq

(Optional)

lsu_nbr_trans

(Optional)

throttle_out

(Optional)

throttle_out_token

(Optional)

throttle_out_ip

(Optional)

lsa_ignored

(Optional)

lsa_dropped_spf

(Optional)

lsa_dropped_gr

(Optional)

pkt_drops_in

(Optional)

pkt_drops_out

(Optional)

pkt_errors_in

(Optional)

pkt_errors_out

(Optional)

hello_errors_in

(Optional)

dbds_errors_in

(Optional)

lsreqs_errors_in

(Optional)

lsus_errors_in

(Optional)

lsacks_errors_in

(Optional)

pkt_unknown_in

(Optional)

pkt_unknown_out

(Optional)

pkt_no_ospf_intf

(Optional)

bad_version

(Optional)

bad_crc

(Optional)

dup_rtr_id

(Optional)

dup_src_addr

(Optional)

invalid_src_addr

(Optional)

invalid_dst_addr

(Optional)

non_existing_nbr

(Optional)

pkt_passive_intf

(Optional)

wrong_area

(Optional)

invalid_pkt_len

(Optional)

nbr_changed_routerid_ipaddr

(Optional)

nbr_changed_interfaceid

(Optional)

bad_auth

(Optional)

bad_reserved

(Optional)

pkt_no_vrf

(Optional)

hellos_in

(Optional)

dbds_in

(Optional)

lsreqs_in

(Optional)

lsus_in

(Optional)

lsacks_in

(Optional)

hellos_out

(Optional)

dbds_out

(Optional)

lsreqs_out

(Optional)

lsus_out

(Optional)

lsacks_out

(Optional)

hellos_in_hq

(Optional)

dbds_in_hq

(Optional)

lsreqs_in_flq

(Optional)

lsus_in_flq

(Optional)

lsacks_in_flq

(Optional)

lsas_in_dbds_in

(Optional)

lsas_in_lsreqs_in

(Optional)

lsas_in_lsus_in

(Optional)

lsas_in_lsacks_in

(Optional)

lsas_in_dbds_out

(Optional)

lsas_in_lsreqs_out

(Optional)

lsas_in_lsus_out

(Optional)

lsas_in_lsacks_out

(Optional)

lsas_in_rxmt_lsus_out

(Optional)

Command Mode

- /exec

show ospfv3 virtual-links

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] virtual-links [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_vlink <name> <nbr_rid> <if_state> <transit_area> <nh_intf> <nbr_addr> [ <transit_area_stub> ] [ <transit_area_nssa> ] <addr> [ <masklen> ] <inst_id> <area> [ <if_cfg> ] <state_str> <type_str> <cost> <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <state> ] [ <transition> ] [ <lastchange> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] [ <helloptions> ] [ <dbdoptions> ] [ <lastnonhello> ] [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

virtual-links

Virtual link information

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_vlink

(Optional)

name

(Optional)

nbr_rid

(Optional)

if_state

(Optional)

transit_area

(Optional)

nh_intf

(Optional)

transit_area_stub

(Optional)

transit_area_nssa

(Optional)

masklen

(Optional)

inst_id

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

bdr_rid

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

ipsec_sa_type

(Optional) IPsec SA Type

ipsec_sa_algorithm

(Optional) IPsec SA Algorithm name

ipsec_sa_spi

(Optional) IPsec SA SPI Value

Command Mode

- /exec

show ospfv3 virtual-links brief

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] virtual-links brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <vlink_count> [ TABLE_vlink <nbr_rid> <vlink_num> <transit_area> <cost> <if_state> ] ]

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

virtual-links

Virtual link information

brief

Display summary of OSPFv3 virtual links

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

vlink_count

(Optional)

TABLE_vlink

(Optional)

nbr_rid

(Optional)

vlink_num

(Optional)

transit_area

(Optional)

cost

(Optional)

if_state

(Optional)

Command Mode

- /exec

Chapter 16. P Show Commands

- show param-list

- show password secure-mode

- show password strength-check

- show pending

- show plb

- show plb analytics

- show plb session device-group

- show plb vrf

- show pmap-int-br interface br

- show pmap-int

- show policy-map

- show policy-map interface control-plane

- show policy-map interface type psp

- show policy-map system

- show policy-map type control-plane

- show policy-map type network-qos

- show policy-map type psp

- show port-channel capacity

- show port-channel compatibility-parameters

- show port-channel database

- show port-channel fast-convergence

- show port-channel load-balance

- show port-channel load-balance forwarding-path1 interface src-interface

- show port-channel load-balance forwarding-path interface

- show port-channel load-balance hardware forwarding-path interface source

- show port-channel rbh-distribution

- show port-channel summary

- show port-channel traffic

- show port-channel usage

- show port-license

- show port-profile

- show port-profile brief

- show port-profile expand-interface

- show port-profile sync-status

- show port-profile usage

- show port-security

- show port-security address

- show port-security address blocked

- show port-security address interface

- show port-security address nvram

- show port-security detail interface

- show port-security interface

- show port-security multivlan address

- show port-security secure address

- show port-security state

- show port-security traps enable

- show port naming

- show power inline

- show power inline

- show power inline police

- show power inline priority

- show privilege

- show processes

- show processes cpu

- show processes cpu history

- show processes cpu history data

- show processes cpu module

- show processes log

- show processes log details

- show processes log pid

- show processes log vdc-all

- show processes memory

- show processes memory clis

- show processes memory physical

- show processes memory shared

- show processes vdc

- show processes vdc cpu

- show processes vdc log

- show processes vdc log details

- show processes vdc log pid

- show processes vdc memory

- show processes version

- show pss debug

- show ptp brief

- show ptp clock

- show ptp clock foreign-masters record

- show ptp corrections

- show ptp cost

- show ptp counters interface

- show ptp delay summary

- show ptp domain data

- show ptp interface domain

- show ptp packet-trace

- show ptp parent

- show ptp port interface

- show ptp time-property

show param-list

show param-list [ param-list-name <plistname> ] [ show-instance ] [ __readonly__ <param_list_header_flag> <param_list_name> <param_list_var> <param_list_type> <param_instance_header_flag> <param_instance_name> <param_instance_var> <param_instance_val> ]

Syntax Description

show

Show running system information

param-list

Show param-list

param-list-name

(Optional) param list name

plistname

(Optional) Enter the name of the param-list

show-instance

(Optional) show instances for the param list

__readonly__

(Optional)

param_list_header_flag

(Optional)

param_list_name

(Optional)

param_list_var

(Optional)

param_list_type

(Optional)

param_instance_header_flag

(Optional)

param_instance_name

(Optional)

param_instance_var

(Optional)

param_instance_val

(Optional)

Command Mode

- /exec

show password secure-mode

show password secure-mode [ __readonly__ { secure_mode <secure_mode_status> } ]

Syntax Description

show

Show running system information

password

Password for the user

secure-mode

secure mode for changing passwords

__readonly__

(Optional)

secure_mode

(Optional) run time status about xml

secure_mode_status

(Optional) Run time status about secure mode

Command Mode

- /exec

show password strength-check

show password strength-check [ __readonly__ { operation_status <o_status> } ]

Syntax Description

show

Show running system information

password

Password for the user

strength-check

Strength check of password

__readonly__

(Optional)

operation_status

(Optional) run-time information about password strength-check

o_status

(Optional) operational status of password strength check

Command Mode

- /exec

show pending

show [ pending ]

Syntax Description

show

Display region configurations

pending

(Optional) Display the new mst configuration to be applied

Command Mode

- /exec/configure/spanning-tree/mst/configuration

show plb

show plb [ service <service-name> ] [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <state> [ <reason> ] <lb_scheme> [ <interface> ] <buckets> [ <vrf_name> ] [ <excl_acl> ] [ <src_interface> ] [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] <interface> <r_status> ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ <ace_name> ] [ <ace_seq> ] [ <ace_ip> ] [ <ace_protocol> ] [ <ace_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

show

Show running system information

plb

Display PLB service details

service

(Optional) PLB details for specific service

service-name

(Optional) Specify PLB service name

brief

(Optional) Display PLB service in brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) PLB service name

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

src_interface

(Optional) source interface for probe

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

excl_acl

(Optional) exclude access-list

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) probe type

dg_probe_port

(Optional) probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

vip_dgname

(Optional) vip device group

ace_name

(Optional) ace information

ace_seq

(Optional) ace information

ace_ip

(Optional) ace information

ace_protocol

(Optional) ace information

ace_port

(Optional) ace information

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show plb analytics

show plb analytics [ service <service-name> ] [ src { <sip> | <sipv6> } | node { <nip> | <nipv6> } | vip { <vip> | <vipv6> } | device-group <group-name> ] [ brief ] [ __readonly__ <plbshowinfo-stats-svc-hdr> [ TABLE_stats_svc <plbshowinfo-stats-service_name> <plbshowinfo-stats-dev-grp> <plbshowinfo-stats-vip> <plbshowinfo-stats-vip-pkts> <plbshowinfo-stats-vip-pkts-percentage> [ <plbshowinfo-stats-ace-seq> ] [ <plbshowinfo-stats-ace-ip> ] <plbshowinfo-stats-bkt-hdr> [ TABLE_stats_bkt <plbshowinfo-stats-acl> [ <plbshowinfo-stats-oper-node> ] <plbshowinfo-stats-node-mode> <plbshowinfo-stats-orig-node> <plbshowinfo-stats-node-pkts> <plbshowinfo-stats-node-pkts-percentage> [ <plbshowinfo-stats-acl-pkts> ] [ <plbshowinfo-for-ace> ] ] ] <plb-show-end> [ <plb-true-end> ] ]

Syntax Description

show

Show running system information

plb

PLB service

analytics

PLB analytics information

service

(Optional) PLB analytics for specific service

service-name

(Optional) Specify plb service name

src

(Optional) Analytics information for source (bucket) ip

node

(Optional) Analytics information for destination device group node/server ip

vip

(Optional) Analytics information for virtual ip

device-group

(Optional) Analytics information of specified device group

group-name

(Optional) Specify device group name

sip

(Optional) Specify source ipv4 address

nip

(Optional) Specify destination ipv4 address

vip

(Optional) Specify virtual ipv4 address

brief

(Optional) Brief analytics information

__readonly__

(Optional) Read Only

plbshowinfo-stats-svc-hdr

(Optional) PLB analytics service header

TABLE_stats_svc

(Optional) plb stats service

plbshowinfo-stats-service_name

(Optional) PLB analytics service name

plbshowinfo-stats-dev-grp

(Optional) PLB analytics device group

plbshowinfo-stats-vip

(Optional) PLB analytics VIP IP

plbshowinfo-stats-vip-pkts

(Optional) PLB analytics virtual ip pkt_count

plbshowinfo-stats-vip-pkts-percentage

(Optional) PLB analytics virtual ip pkts percentage

plbshowinfo-stats-ace-seq

(Optional) PLB analytics ACE name and sequence number

plbshowinfo-stats-ace-ip

(Optional) PLB analytics ACE ip/mask/prefix

plbshowinfo-stats-bkt-hdr

(Optional) PLB analytics bucket header

TABLE_stats_bkt

(Optional) plb stats bucket

plbshowinfo-stats-acl

(Optional) PLB analytics bucket/acl name

plbshowinfo-stats-oper-node

(Optional) PLB analytics Operational node ip

plbshowinfo-stats-node-mode

(Optional) PLB analytics node mode

plbshowinfo-stats-orig-node

(Optional) PLB analytics Original node ip

plbshowinfo-stats-node-pkts

(Optional) PLB analytics node pkts count

plbshowinfo-stats-node-pkts-percentage

(Optional) PLB analytics node pkts percentage

plbshowinfo-stats-acl-pkts

(Optional) PLB analytics acl pkts

plbshowinfo-for-ace

(Optional) PLB analytics for ACE

plb-show-end

(Optional) Show plb end marker

plb-true-end

(Optional) show plb true end marker

Command Mode

- /exec

show plb session device-group

show plb session device-group [ <group-name> ] [ __readonly__ <first_entry> [ TABLE_svc <node> ] ]

Syntax Description

show

Show running system information

plb

Display PLB service details

session

PLB service session

device-group

Session device-group

group-name

(Optional) Device-group name

__readonly__

(Optional) Read Only

first_entry

(Optional)

TABLE_svc

(Optional)

node

(Optional) node

Command Mode

- /exec

show plb vrf

show plb vrf [ <vrf-name> ] [ __readonly__ <plbshowinfo-vrf-hdr> { TABLE_svc <plbshowinfo-vrf-service_name> <plbshowinfo-vrf-name> <plbshowinfo-vrf-id> } <plb-show-end> [ <plb-true-end> ] ]

Syntax Description

show

Show running system information

plb

PLB service

vrf

PLB service vrf

vrf-name

(Optional) VRF name

__readonly__

(Optional) Read Only

plbshowinfo-vrf-hdr

(Optional) PLB info vrf header

TABLE_svc

(Optional) PLB Service VRF details

plbshowinfo-vrf-service_name

(Optional) PLB service name

plbshowinfo-vrf-name

(Optional) PLB vrf name

plbshowinfo-vrf-id

(Optional) PLB vrf id

plb-show-end

(Optional) Show plb end marker

plb-true-end

(Optional) show plb true end marker

Command Mode

- /exec

show pmap-int-br interface br

show pmap-int-br interface br [ __readonly__ { [ TABLE_ifvlanstr <if-vlan-str> <if-status> [ <in-pmap-qos> ] [ <out-pmap-qos> ] [ <in-pmap-que> ] [ <out-pmap-que> ] ] } ]

Syntax Description

show

Show running system information

pmap-int-br

Show policy maps

interface

Show service policy on interface

br

Brief report of all policies attached to interfaces

TABLE_ifvlanstr

(Optional) all interfaces xml sessions

if-vlan-str

(Optional) ifindex or vlan id: xml key

__readonly__

(Optional)

if-status

(Optional) Interface/vlan status [active/inactive]: xml key

in-pmap-qos

(Optional) Input QoS Policy-map name: xml key

out-pmap-qos

(Optional) output QoS Policy-map name: xml key

in-pmap-que

(Optional) Input Que Policy-map name: xml key

out-pmap-que

(Optional) Output Que Policy-map name: xml key

Command Mode

- /exec

show pmap-int

show pmap-int { interface [ <iface-list> ] [ input | output ] [ type <qos-or-q> ] [ detail ] |

Syntax Description

show

Show running system information

pmap-int

Show policy maps

interface

Show service policy on interface

iface-list

(Optional) List of Interface

input

(Optional) Input Service policy

output

(Optional) Output Service policy

type

(Optional) Type of policy

qos-or-q

(Optional)

detail

(Optional) Detailed QoS or Queuing statistics

Command Mode

- /exec

show policy-map

show policy-map [ { [ type qos ] [ <pmap-name-qos> ] } | { type queuing [ <pmap-name-que> ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_pmap <pmap-key> [ <type-spec> ] [ <yqos-or-q> ] [ <options> ] <pmap-name-out> [ <desc> ] [ TABLE_cmap <cmap-key> [ <type-cmap-spec> ] [ <xqos-or-q> ] [ <cmap-name> ] [ TABLE_action <action-key> [ <serv-pol-type> ] [ <serv-pol-name> ] [ <inner> ] [ <dlb-disable> ] [ <cos> ] [ <exp-val-imposition> ] [ <exp-val-topmost> ] [ <dscp-enum> ] [ <dscp> ] [ <prec-enum> ] [ <prec> ] [ <disc-class> ] [ <qos-group> ] [ <tmap-from> ] [ <tmap-to> ] [ <tmap-name> ] [ <avg-rate-type> ] [ <rate-units> ] [ <shape-rate> ] [ <min-rate-type> ] [ <min-rate-units> ] [ <shape-min-rate> ] [ <max-rate-type> ] [ <max-rate-units> ] [ <shape-max-rate> ] [ <rise-threshold-units> ] [ <fall-threshold-units> ] [ <prio-level> ] [ <qlim-param-type> ] [ <qlim-param-val> ] [ <ooo> ] [ <size-units> ] [ <qlim-size> ] [ <qlim-enum-spec> ] [ <rdet-agg> ] [ <rdet-mode> ] [ <rdet-burst-opt> ] [ <rdet-mesh-opt> ] [ <rdet-ecn> ] [ TABLE_rdet <rdet-key> [ <rdet-values> ] [ <rdet-min-thresh> ] [ <rdet-size-units> ] [ <rdet-max-thresh> ] [ <rdet-drop-prob> ] [ <rdet-weight> ] [ <rdet-cap-average> ] ] [ <rdet-nonecn-mode> ] [ TABLE_rdet_nonecn <rdet-nonecn-key> [ <rdet-nonecn-min-thresh> ] [ <rdet-nonecn-size-units> ] [ <rdet-nonecn-max-thresh> ] [ <rdet-nonecn-drop-prob> ] ] [ <afd-mode> ] [ TABLE_afd <afd-key> [ <afd-values> ] [ <afd-queue-desired> ] [ <afd-size-units> ] [ <afd-ecn> ] ] [ <pause> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <priority-group-number> ] [ <bw-units> ] [ <bw-rate> ] [ <rem-bw-units> ] [ <rem-bw-rate> ] [ <agg-policer-name> ] [ <cir-spec> ] [ <bc-spec> ] [ <be-spec> ] [ <cir-rate-units> ] [ <cir> ] [ <bc-size-units> ] [ <bc> ] [ <pir-rate-units> ] [ <pir> ] [ <be-size-units> ] [ <be> ] [ <cnf-col-cmap> ] [ <exc-col-cmap> ] [ TABLE_police <police-key> [ <cnf-act> ] [ <exc-act> ] [ <vio-act> ] [ <set-type> ] [ <enum-spec> ] [ <set-val> ] [ <ptmap-from> ] [ <ptmap-to> ] [ <ptmap-name> ] ] [ <burst-detect-enable> ] ] ] ] } ]

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

(Optional) Type of the policy-map

qos

(Optional) type qos

queuing

(Optional) type queuing

pmap-name-qos

(Optional) policy map name (type qos)

pmap-name-que

(Optional) policy map name (type queuing)

__readonly__

(Optional)

display-all

(Optional) Display all kinds of class-maps

TABLE_pmap

(Optional) all pmap xml sessions

pmap-key

(Optional) Policy-map name: xml key

TABLE_rdet

(Optional) all WRED sessions

TABLE_rdet_nonecn

(Optional) all WRED non ECN sessions

TABLE_afd

(Optional) all AFD sessions

TABLE_police

(Optional) all police actions

police-key

(Optional) police actions count: xml key

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

TABLE_action

(Optional) all actions

action-key

(Optional) Actions count: xml key

yqos-or-q

(Optional)

options

(Optional) match-first option

pmap-name-out

(Optional) Policy-map name

desc

(Optional) Description string

cmap-name

(Optional) Class-map name

xqos-or-q

(Optional)

serv-pol-type

(Optional) Type of service policy referred to

serv-pol-name

(Optional) Name of policy-map referred to within this policy-map

type-spec

(Optional) Type of policy-map specified or not

type-cmap-spec

(Optional) Type of class-map specified or not

inner

(Optional) Specifies if tunnel or inner keywords are mentioned

dlb-disable

(Optional) Disable Dynamic Load Balancing

cos

(Optional) IEEE 802.1Q Class of Service value

exp-val-imposition

(Optional) MPLS EXP value of type imposition

exp-val-topmost

(Optional) MPLS EXP calue of type topmost

dscp

(Optional) DSCP in IP(v4) and IPv6 packets

dscp-enum

(Optional)

prec

(Optional) Precedence in IP(v4) and IPv6 packets

prec-enum

(Optional)

disc-class

(Optional) Discard class

qos-group

(Optional) Qos-group

tmap-from

(Optional)

tmap-to

(Optional)

tmap-name

(Optional) Table map name

ptmap-from

(Optional)

ptmap-to

(Optional)

ptmap-name

(Optional) Table map name

avg-rate-type

(Optional) Specifies if average shape rate is specified

rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

min-rate-type

(Optional) Specifies if minimum shape rate is specified

min-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

max-rate-type

(Optional) Specifies if maximum shape rate is specified

max-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

cir-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps

pir-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps

prio-level

(Optional) Priority if specified

qlim-param-type

(Optional) Type of parameter for qlim - cos/prec/dscp/disc class/qosgrp

qlim-param-val

(Optional) Parameter value for qlimit

qlim-size

(Optional) Queue size for qlimit

size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

rdet-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

rdet-nonecn-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

afd-size-units

(Optional) Units of queue size - bytes/kbytes/mbytes

bc-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

be-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

qlim-enum-spec

(Optional) Weather qlimit parameter is specified in enum or not

rdet-mode

(Optional) Random-detect mode

rdet-nonecn-mode

(Optional) Random-detect non-ecn mode

rdet-agg

(Optional) Are the params for aggregate flow

rdet-values

(Optional) List of class-of-service values for random-detect

rdet-drop-prob

(Optional) Random-detect drop probability

rdet-weight

(Optional) Random-detect queue length weight

rdet-cap-average

(Optional) Random-detect cap-average

rdet-ecn

(Optional) Random-detect ECN

rdet-burst-opt

(Optional) Random-detect burst optimized

rdet-mesh-opt

(Optional) Random-detect mesh optimized

rdet-nonecn-drop-prob

(Optional) Random-detect non-ecn drop probability

afd-mode

(Optional) AFD mode

afd-values

(Optional) List of class-of-service values for AFD

afd-ecn

(Optional) AFD ECN

pause

(Optional) Pause value

priority-group-number

(Optional) Priority group value

bw-units

(Optional) Bandwidth units

rem-bw-units

(Optional) Remaining bandwidth units

rem-bw-rate

(Optional) Remaining bandwidth rate

agg-policer-name

(Optional) Aggregate policer name

cir-spec

(Optional) Is CIR keyword specified

bc-spec

(Optional) Is Committed Burst keyword specified

be-spec

(Optional) Is Extended Burst keyword specified

cnf-col-cmap

(Optional) Conforming color class-map name

exc-col-cmap

(Optional) Exceeding color class-map name

enum-spec

(Optional) Is DSCP or PREC enum value specified

cnf-act

(Optional) Conform action (Police)

exc-act

(Optional) Exceed action (Police)

vio-act

(Optional) Violate action (Police)

set-type

(Optional) Type of set in police action

set-val

(Optional) Value of set type in police action

ooo

(Optional) Out-of-Order

burst-detect-enable

(Optional) Burst detect feature is enabled

Command Mode

- /exec

show policy-map interface control-plane

show policy-map interface control-plane { [ module <slot-no-in> [ class <cmap-name> ] ] | [ class <cmap-name> [ module <slot-no-in> ] ] } [ __readonly__ [ <scale-factor-cmd> ] <pmap-name> [ TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> { [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] } + ] [ <class-off-rate> <class-drop-rate> <class-pkts> <class-bytes> ] [ [ <set_vld_flg> ] { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ { percent <cir-perc> } ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ { percent1 <pir-perc> } ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] ] [ TABLE_slot { <slot-no-out> { [ [ <conform-pkts> ] <conform-bytes> ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { [ [ <exceed-pkts> ] <exceed-bytes> ] { { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } } } ] { [ [ <violate-pkts> ] <violate-bytes> ] { { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } } } } } ] ] ]

Syntax Description

show

Show running system information

policy-map

Show policy maps

interface

Show service policy on interface

control-plane

command is for copp policy

module

(Optional) module number for statistics

class

(Optional) class-name name

cmap-name

(Optional) Name of the class-map

pmap-name

(Optional) Name of the Policy-map

__readonly__

(Optional)

scale-factor-cmd

(Optional) Scale factor command

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map key : XML output

cmap-name-out

(Optional) Name of the output class-map

opt_any_or_all

(Optional) Enter match-any or match-all

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) Match key : XML output

access_grp

(Optional)

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

set_vld_flg

(Optional) Set valid flag

cos

(Optional)

inner

(Optional)

cos-val

(Optional) Set cos val

dscp

(Optional)

tunnel

(Optional)

dscp-val

(Optional) Set dscp val

precedence

(Optional)

tunnel1

(Optional)

prec-val

(Optional) Set prec val

policer_show_flags

(Optional) Policer show flags

level

(Optional) syslog severity level

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

(Optional)

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional)

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

opt_kbytes_mbytes_gbytes_be

(Optional) Units

TABLE_slot

(Optional) all slot-num : XML output

slot-no-in

(Optional) input slot no

slot-no-out

(Optional) output slot no

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional)

set-cos-val

(Optional) Conform action cos val

set-dscp-transmit

(Optional)

set-dscp-val

(Optional) Conform action dscp val

set-prec-transmit

(Optional)

set-prec-val

(Optional) Conform action prec val

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional)

dscp1

(Optional)

dscp2

(Optional)

table

(Optional)

cir-markdown-map

(Optional)

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional)

dscp3

(Optional)

dscp4

(Optional)

table1

(Optional)

pir-markdown-map

(Optional)

Command Mode

- /exec

show policy-map interface type psp

show policy-map interface { [ <ifnum> ] } type psp { [ <pmap-name> [ client <clienttype> <clientID> ] ] | [ handle <ppf_id> ] } { [ class-map-list { [ <cmap-name-plc> + ] | [ class-map-handle <ppf_id1> + ] } ] } [ __readonly__ { [ <number-of-classes> ] [ <display-all> ] [ TABLE_pmap <pmap-key> <id> <pmap-name-out> [ <desc> ] [ TABLE_cmap <cmap-key> [ <cmap-name-out> ] [ TABLE_interface <interface> <byte-count> ] ] ] } ]

Syntax Description

show

Show running system information

policy-map

Show policy maps

interface

Show stats for interface

ifnum

(Optional) Interface type and number

type

Type of the policy-map

psp

type psp

pmap-name

(Optional) Policy-map name

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

handle

(Optional) Handle

ppf_id

(Optional) PPF ID

class-map-list

(Optional) Class-map list

cmap-name-plc

(Optional) Class-map name

class-map-handle

(Optional) Class-map Handle/s

ppf_id1

(Optional) PPF ID

__readonly__

(Optional)

display-all

(Optional) Display all kinds of policymaps

number-of-classes

(Optional) Total number of classes for which stats are returned

TABLE_pmap

(Optional) all pmap xml sessions

id

(Optional) Policy-map ID

pmap-key

(Optional) Policy-map name: xml key

pmap-name-out

(Optional) Policy-map name

desc

(Optional) Description string

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

cmap-name-out

(Optional) Class-map name

TABLE_interface

(Optional) all interface xml sessions

interface

(Optional) Interface type and number

byte-count

(Optional) Byte Count Statistic

Command Mode

- /exec

show policy-map system

show policy-map system [ type { network-qos | qos [ input2 ] | queuing [ input | output ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_xpmap <xpmap-name> [ <desc> ] [ TABLE_xcmap <xcmap-name> [ TABLE_xaction <xaction-key> [ <cos-list> ] [ <qos-group-list> ] [ <protocol> ] [ <pause> <timeout> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <pfc-cos-list> ] [ <pfc_rx_only> ] [ <cc> ] [ <thresh-units> ] [ <min-thresh> ] [ <max-thresh> ] [ <drop-prob> ] [ <iod> ] [ <mtu> ] [ <set-cos> ] [ <dpp> ] [ <dctcp-threshold> ] [ <queue-limit> ] [ <stat-en-dis-enum> ] ] ] ] [ TABLE_pmap <pmap-key> <pmap-inner-outer> <in-or-out> <yqos-or-q> [ <options> ] <pmap-name> [ <stat-status-enum> ] [ TABLE_cmap <cmap-key> [ <xqos-or-q> ] <match-opts> <cmap-name> [ TABLE_match <match-key> [ <not> ] [ <inner> ] [ <cos-list> ] [ <match-cmap-xqos-or-q> ] [ <match-cmap-opts> ] [ <match-cmap-name> ] ] [ TABLE_action <action-key> [ <set-inner> ] [ <cos> ] [ <serv-pol-type> ] [ <serv-pol-name> ] [ <serv-pol-return-inout> ] [ <rate-units> ] [ <shape-rate> ] [ <min-rate-type> ] [ <min-rate-units> ] [ <shape-min-rate> ] [ <max-rate-type> ] [ <max-rate-units> ] [ <shape-max-rate> ] [ <prio-level> ] [ <qlim-param-type> ] [ <qlim-param-val> ] [ <size-units> ] [ <qlim-size> ] [ <qlim-enum-spec> ] [ <bw-units> ] [ <bw-rate> ] [ <rem-bw-units> ] [ <rem-bw-rate> ] [ <rise-threshold-units> ] [ <fall-threshold-units> ] [ <rdet-agg> ] [ <rdet-mode> ] [ <rdet-burst-opt> ] [ <rdet-mesh-opt> ] [ TABLE_rdet <rdet-key> [ <rdet-values> ] [ <rdet-min-thresh> ] [ <rdet-size-units> ] [ <rdet-max-thresh> ] [ <rdet-drop-prob> ] [ <rdet-weight> ] [ <rdet-cap-average> ] ] [ <rdet-ecn> ] [ TABLE_afd <afd-key> [ <afd-values> ] [ <afd-queue-desired> ] [ <afd-size-units> ] [ <afd-ecn> ] ] [ <pause> <size-in-bytes> <xoff-bytes> <xon-bytes> ] ] ] ] } ]

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

(Optional) Type of the policy-map

system

Active policy in the system

network-qos

(Optional) type network-qos

qos

(Optional) type qos

input2

(Optional) input policy

queuing

(Optional) type queuing

input

(Optional) input policy

output

(Optional) output policy

__readonly__

(Optional)

display-all

(Optional) Display all network-qos policy-maps

TABLE_xpmap

(Optional) all xpmap xml sessions

xpmap-name

(Optional) Policy-map name

TABLE_xcmap

(Optional) all xcmap xml sessions

xcmap-name

(Optional) Class-map name

TABLE_xaction

(Optional) all network-qos actions

xaction-key

(Optional) network-qos ctions count: xml key

TABLE_pmap

(Optional) all pmap xml sessions

pmap-key

(Optional) Policy-map name: xml key

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

TABLE_action

(Optional) all actions

action-key

(Optional) Actions count: xml key

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

TABLE_rdet

(Optional) all WRED sessions

TABLE_afd

(Optional) all AFD sessions

stat-en-dis-enum

(Optional)

in-or-out

(Optional)

yqos-or-q

(Optional)

stat-status-enum

(Optional)

desc

(Optional) Description string

thresh-units

(Optional) Units of threshold - pkts/bytes/kbytes/mbytes/ms/us/perc

drop-prob

(Optional) Drop Probability at Maximum Threshold value

pause

(Optional) Pause value

pfc-cos-list

(Optional) List of class-of-service values

pfc_rx_only

(Optional) Pause receive only mode enabled

timeout

(Optional) timeout value

cc

(Optional) congestion control protocol

iod

(Optional) IOD value

mtu

(Optional) MTU value

set-cos

(Optional) Set CoS value

dpp

(Optional) Dynamic Packet Prioritization Class

queue-limit

(Optional) Queue size for the class

protocol

(Optional) protocol

dctcp-threshold

(Optional) DCTCP threshold in bytes

cos-list

(Optional) List of class-of-service values

qos-group-list

(Optional) List of qos-group values

options

(Optional) match-first option

pmap-name

(Optional) Policy-map name

pmap-inner-outer

(Optional) Inner or Outer policy-map

serv-pol-return-inout

(Optional) Inner or Outer policy-map

cmap-name

(Optional) Class-map name

xqos-or-q

(Optional)

match-opts

(Optional) Type of match in class-map

match-cmap-xqos-or-q

(Optional)

match-cmap-opts

(Optional) Type of match in class-map

not

(Optional) Negate this match result

inner

(Optional) Specifies if tunnel or inner keywords are mentioned

cos-list

(Optional) List of class-of-service values

match-cmap-name

(Optional) class-map name

serv-pol-type

(Optional) Type of service policy referred to

serv-pol-name

(Optional) Name of policy-map referred to within this policy-map

set-inner

(Optional) Specifies if tunnel or inner keywords are mentioned

cos

(Optional) IEEE 802.1Q Class of Service value

rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

min-rate-type

(Optional) Specifies if minimum shape rate is specified

min-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

max-rate-type

(Optional) Specifies if maximum shape rate is specified

max-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

prio-level

(Optional) Priority if specified

qlim-param-type

(Optional) Type of parameter for qlim - cos/prec/dscp/disc class/qosgrp

qlim-param-val

(Optional) Parameter value for qlimit

qlim-size

(Optional) Queue size for qlimit

size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

qlim-enum-spec

(Optional) Weather qlimit parameter is specified in enum or not

rdet-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

afd-size-units

(Optional) Units of queue size - bytes/kbytes/mbytes

bw-units

(Optional) Bandwidth units

rem-bw-units

(Optional) Remaining bandwidth units

rem-bw-rate

(Optional) Remaining bandwidth rate

rdet-values

(Optional) List of class-of-service values for random-detect

rdet-agg

(Optional) Are the params for aggregate flow

rdet-mode

(Optional) Random-detect mode

rdet-drop-prob

(Optional) Random-detect drop probability

rdet-weight

(Optional) Random-detect queue length weight

rdet-cap-average

(Optional) Random-detect cap-average

rdet-ecn

(Optional) Random-detect ECN

rdet-burst-opt

(Optional) Random-detect burst optimized

rdet-mesh-opt

(Optional) Random-detect mesh optimized

afd-values

(Optional) List of class-of-service values for afd

afd-ecn

(Optional) AFD ECN

pause

(Optional) Pause value

Command Mode

- /exec

show policy-map type control-plane

show policy-map type control-plane [ expand ] [ { name <pmap-name> } ] [ __readonly__ [ { TABLE_pmap <pmap-name1> [ { TABLE_cmap <cmap-name> [ <opt_any_or_all> ] [ TABLE_match <match_key> { [ access_grp <acc_grp_name> ] | [ redirect <opt_match_redirect> ] | [ exception <opt_match_excpt> ] | [ protocol <opt_match_protocol> ] } ] [ { TABLE_set_action <set_vld_flg> { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ percent <cir-perc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ percent1 <pir-perc> ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } ] [ { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } ] ] } ] } ] ]

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

Type of the policy-map

control-plane

command is for copp policy

expand

(Optional) Display the match-criterias along with class-map

name

(Optional) policy-map name

pmap-name

(Optional) Name of the Policy-map

__readonly__

(Optional)

TABLE_pmap

(Optional) Table of policy-map

pmap-name1

(Optional) Name of the Policy-map

TABLE_cmap

(Optional) Table of class-map

cmap-name

(Optional) Name of the class-map

opt_any_or_all

(Optional) Enter match-any or match-all

TABLE_match

(Optional) Table of match statement

match_key

(Optional) Match key : XML output

access_grp

(Optional)

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

TABLE_set_action

(Optional) Table of set action

set_vld_flg

(Optional) Set valid flag

level

(Optional) syslog severity level

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

(Optional)

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional)

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

opt_kbytes_mbytes_gbytes_be

(Optional) Units

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional)

set-cos-val

(Optional) Conform action cos val

set-dscp-transmit

(Optional)

set-dscp-val

(Optional) Conform action dscp val

set-prec-transmit

(Optional)

set-prec-val

(Optional) Conform action prec val

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional)

dscp1

(Optional)

dscp2

(Optional)

table

(Optional)

cir-markdown-map

(Optional)

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional)

dscp3

(Optional)

dscp4

(Optional)

table1

(Optional)

pir-markdown-map

(Optional)

cos

(Optional)

inner

(Optional)

cos-val

(Optional) Set cos val

dscp

(Optional)

tunnel

(Optional)

dscp-val

(Optional) Set dscp val

precedence

(Optional)

tunnel1

(Optional)

prec-val

(Optional) Set prec val

policer_show_flags

(Optional) Policer show flags

Command Mode

- /exec

show policy-map type network-qos

show policy-map type network-qos [ <pmap-name-nq> ] [ __readonly__ { [ <display-all> ] [ TABLE_xpmap <xpmap-name> [ <desc> ] [ TABLE_xcmap <xcmap-name> [ TABLE_action <action-key> [ <pause> <timeout> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <pfc-cos-list> ] [ <pfc_rx_only> ] [ <cc> ] [ <thresh-units> ] [ <min-thresh> ] [ <max-thresh> ] [ <drop-prob> ] [ <iod> ] [ <mtu> ] [ <set-cos> ] [ <dpp> ] [ <dctcp-threshold> ] [ <queue-limit> ] ] ] ] } ]

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

Type of the policy-map

pmap-name-nq

(Optional) Policy-map name

network-qos

type network-qos

__readonly__

(Optional)

display-all

(Optional) Display all network-qos policy-maps

TABLE_xpmap

(Optional) all xpmap xml sessions

xpmap-name

(Optional) Policy-map name

TABLE_xcmap

(Optional) all xcmap xml sessions

xcmap-name

(Optional) Class-map name

TABLE_action

(Optional) all actions

action-key

(Optional) Actions count: xml key

desc

(Optional) Description string

pause

(Optional) Pause value

timeout

(Optional) timeout value

pfc-cos-list

(Optional) List of class-of-service values

cc

(Optional) congestion control protocol

thresh-units

(Optional) Units of threshold - pkts/bytes/kbytes/mbytes/ms/us/perc

drop-prob

(Optional) Drop Probability at Maximum Threshold value

iod

(Optional) IOD value

mtu

(Optional) MTU value

set-cos

(Optional) Set CoS value

dpp

(Optional) Dynamic Packet Prioritization Class

dctcp-threshold

(Optional) DCTCP threshold in bytes

queue-limit

(Optional) Queue size for the class

pfc_rx_only

(Optional) Pause receive only mode is enabled

Command Mode

- /exec

show policy-map type psp

show policy-map type psp { [ <pmap-name> [ client <clienttype> <clientID> ] [ cfg-mode <cfgmode> ] ] | [ handle <ppf_id> ] } [ __readonly__ { [ <display-all> ] [ TABLE_pmap <pmap-key> <id> <pmap-name-out> [ <desc> ] [ TABLE_cmap <cmap-key> <if-else-id> <cmap-id> [ class-default ] [ <cmap-name-out> ] [ TABLE_action <action-key> [ <cos-val> ] [ <src-mac-addr> ] [ <dest-mac-addr> ] [ <vlan-number> ] [ <ip-tos-value> ] [ <interface-name> ] [ action-strip-vlan ] [ action-drop-pkt ] [ divert-action ] [ copy-action ] [ forward-normal ] [ <goto-pmap-handle> ] [ action-decrement-ttl ] ] ] ] } ]

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

Type of the policy-map

psp

type psp

pmap-name

(Optional) Policy-map name

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

cfg-mode

(Optional) cfg-mode

cfgmode

(Optional) persistent/transient

handle

(Optional) Handle

ppf_id

(Optional) PPF ID

__readonly__

(Optional)

display-all

(Optional) Display all kinds of policymaps

TABLE_pmap

(Optional) all pmap xml sessions

id

(Optional) Policy-map ID

pmap-key

(Optional) Policy-map name: xml key

pmap-name-out

(Optional) Policy-map name

desc

(Optional) Description string

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

if-else-id

(Optional) If-Else ID

cmap-id

(Optional) Class-map ID

class-default

(Optional)

cmap-name-out

(Optional) Class-map name

TABLE_action

(Optional) all action xml sessions

action-key

(Optional) action count: xml key

cos-val

(Optional) 802.1Q Class of Service value

src-mac-addr

(Optional) Layer 2 MAC Address

dest-mac-addr

(Optional) Layer 2 MAC Address

vlan-number

(Optional) VLAN NUMBER

ip-tos-value

(Optional) IPv4 TOS Value

interface-name

(Optional) Physical Interface Name and Number

action-strip-vlan

(Optional) Perform the action STRIP-VLAN-ID

action-drop-pkt

(Optional) Perform the action Drop the Packet

divert-action

(Optional) Divert the packets to Controller

copy-action

(Optional) Copy the packets to Controller

forward-normal

(Optional) Forward the packets normally

goto-pmap-handle

(Optional) Pmap handle

action-decrement-ttl

(Optional) Decrement TTL on the Packet

Command Mode

- /exec

show port-channel capacity

show port-channel capacity [ __readonly__ <total> <used> <free> <percentage_used> ]

Syntax Description

show

Show running system information

port-channel

Show port-channel information

capacity

Capacity information

__readonly__

(Optional)

total

(Optional) Total resource

used

(Optional) Used resource

free

(Optional) Free resource

percentage_used

(Optional) Used resource in percentage

Command Mode

- /exec

show port-channel compatibility-parameters

show port-channel compatibility-parameters [ __readonly__ { TABLE_compatibility <parameter> <description> } + ]

Syntax Description

show

Show running system information

port-channel

Show port-channel information

compatibility-parameters

Show compatibility parameters

__readonly__

(Optional)

TABLE_compatibility

(Optional) Port-channel compatibility table

parameter

(Optional) Compatibity parameter

description

(Optional) Parameter description

Command Mode

- /exec

show port-channel database

show port-channel database [ interface <if0> ] [ __readonly__ TABLE_interface <interface> <last-membership-update> <total-ports> <total-up-ports> [ <first_operational-port> ] <age-of-channel> [ <time-since-last-bundle> ] [ <last-bundled-member> ] [ <time-since-last-unbundle> ] [ <last-unbundled-member> ] [ { TABLE_member <port> <mode> <port-status> } ] [ <protocol> ] ]

Syntax Description

show

Show running system information

port-channel

Show port-channel information

database

Show port-channel database

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port-channel table

interface

(Optional) Port channel

mode

(Optional) channel-group mode

last-membership-update

(Optional) Last membership update

total-ports

(Optional) Total number of member ports

total-up-ports

(Optional) Total number of UP member ports

first_operational-port

(Optional) First operational port

TABLE_member

(Optional) Member ports info

port

(Optional) Member port

port-status

(Optional) Member port status

age-of-channel

(Optional) Age of port channel

time-since-last-bundle

(Optional) Time since last port bundled

last-bundled-member

(Optional) Last bundled member port

time-since-last-unbundle

(Optional) Time since last port un-bundled

last-unbundled-member

(Optional) Last unbundled member port

protocol

(Optional) Port channel protocol

Command Mode

- /exec

show port-channel fast-convergence

show port-channel fast-convergence

Syntax Description

show

Show running system information

port-channel

Configure port channel parameters

fast-convergence

Show port-channel fast-convergence status

Command Mode

- /exec

show port-channel load-balance

show port-channel load-balance { [ module <module> ] | { fex { all } } } [ __readonly__ [ <sys-cfg> ] [ { <module-cfg> } ] + <non-ip-val> <non-ip-sel> <ipv4-val> <ipv4-sel> [ <ipv6-val> ] { TABLE_mod_configs [ <mod-number> ] <mod-non-ip-val> <mod-non-ip-sel> <mod-ipv4-val> <mod-ipv4-sel> } ]

Syntax Description

show

Show running system information

port-channel

Show port-channel information

load-balance

Show port-channel load balance

module

(Optional) slot

module

(Optional) Specify a module number

fex

FEX devices

all

Display all configured FEX port-channel LB

__readonly__

(Optional)

sys-cfg

(Optional) system wide load balance configuraton

module-cfg

(Optional) per module load balance configuraton

non-ip-val

(Optional) load balance setting for non-ip traffic

non-ip-sel

(Optional) non ip select

ipv4-val

(Optional) load balance setting for ipv4 traffic

ipv4-sel

(Optional) ip select

ipv6-val

(Optional) load balance setting for ipv6 traffic

TABLE_mod_configs

(Optional) module configurations

mod-number

(Optional) module number

mod-non-ip-val

(Optional) load balance setting for non-ip traffic

mod-non-ip-sel

(Optional) non ip select

mod-ipv4-val

(Optional) load balance setting for ipv4 traffic

mod-ipv4-sel

(Optional) ip select

Command Mode

- /exec

show port-channel load-balance forwarding-path1 interface src-interface

show port-channel load-balance forwarding-path1 interface <ch-id> src-interface <src-if> { vlan <vlan-id> | src-mac <src-mac> | dst-mac <dst-mac> | src-ip <src-ip> | dst-ip <dst-ip> | src-ipv6 <src-ipv6> | dst-ipv6 <dst-ipv6> | l4-src-port <l4-src-port> | l4-dst-port <l4-dst-port> | ether-type <ethertype> | ip-proto <prot> } + [ __readonly__ { loadbalance-algorithm <algorithm> } { outgoing-port-id <port> } ]

Syntax Description

show

Show running system information

port-channel

Configure port channel parameters

load-balance

Show port-channel load balance

forwarding-path1

Packet forwarding information

interface

Specify a port-channel number

ch-id

Port-Channel name

vlan

VLAN - for dot1Q tagged packets at ingress

vlan-id

VLAN ID

src-mac

Source MAC Address

src-mac

Source MAC address

dst-mac

Destination MAC Address

dst-mac

Destination MAC address

src-ip

Source IP address

src-ip

Source IP address in format i.i.i.i

dst-ip

Destination IPv4 address

dst-ip

Destination IP address in format i.i.i.i

src-ipv6

Source IPv6 address

dst-ipv6

Destination IPv6 address

l4-src-port

Source Port

l4-src-port

Source L4 port

l4-dst-port

Destination Port

l4-dst-port

Destination L4 port

ether-type

Ethernet Type

ethertype

Ethernet Type

src-interface

Optional source interface (physical switch port only)

src-if

Interface name

ip-proto

IP v4/v6 Protocol

prot

IP Protocol

__readonly__

(Optional)

loadbalance-algorithm

(Optional) load balance algorithm

algorithm

(Optional) algorithm

outgoing-port-id

(Optional) outgoing port-id

port

(Optional) port

Command Mode

- /exec

show port-channel load-balance forwarding-path interface

show port-channel load-balance forwarding-path { interface <ch-id> | hgig } { src-interface <src-if> | vlan <vlan-id> | src-mac <src-mac> | dst-mac <dst-mac> | src-ip <src-ip> | dst-ip <dst-ip> | src-ipv6 <src-ipv6> | dst-ipv6 <dst-ipv6> | l4-src-port <l4-src-port> | l4-dst-port <l4-dst-port> | ethertype <ethertype> | protocol <prot> } + [ module <module> | fex <fex-range> | hgig-tgid <tgid> ] + [ source-interface <if-id> ] [ __readonly__ { loadbalance-algorithm <algorithm> } { outgoing-port-id <port> } ]

Syntax Description

show

Show running system information

port-channel

Configure port channel parameters

load-balance

Show port-channel load balance

forwarding-path

Packet forwarding information

interface

Specify a port-channel number

ch-id

Port-Channel name

hgig

Higig hashing result (only with RTAG7)

vlan

VLAN of the ingress packet i.e. when available

vlan-id

src-mac

Source MAC Address

src-mac

Source MAC address

dst-mac

Destination MAC Address

dst-mac

Destination MAC address

src-ip

Source IPv4 address

src-ip

Source IP address in format i.i.i.i

dst-ip

Destination IPv4 address

dst-ip

Destination IP address in format i.i.i.i

src-ipv6

Source IPv6 address

dst-ipv6

Destination IPv6 address

l4-src-port

Source L4 port

l4-src-port

Source L4 port

l4-dst-port

Destination l4 port

l4-dst-port

Destination L4 port

ethertype

Ethertype of the packet stream

ethertype

src-interface

Optional source interface (physical switch port only)

src-if

Interface name

source-interface

(Optional) Source interface - Required paramter

if-id

(Optional) Interface name

protocol

Protocol

prot

module

(Optional) Module #

module

(Optional)

fex

(Optional) FEX devices

fex-range

(Optional) FEX device range

hgig-tgid

(Optional) Higig #

tgid

(Optional)

__readonly__

(Optional)

loadbalance-algorithm

(Optional) load balance algorithm

algorithm

(Optional) load balance algorithm

outgoing-port-id

(Optional) outgoing port-id

port

(Optional) outgoing port-id

Command Mode

- /exec

show port-channel load-balance hardware forwarding-path interface source

show port-channel load-balance hardware forwarding-path { interface <ch-id> | hgig } { source-interface <if-id> } { vlan <vlan-id> | src-mac <src-mac> | dst-mac <dst-mac> | src-ip <src-ip> | dst-ip <dst-ip> | src-ipv6 <src-ipv6> | dst-ipv6 <dst-ipv6> | l4-src-port <l4-src-port> | l4-dst-port <l4-dst-port> | ethertype <ethertype> | protocol <prot> } + [ module <module> | fex <fex-range> | hgig-tgid <tgid> ] [ __readonly__ { loadbalance-algorithm <algorithm> } { outgoing-port-id <port> } ]

Syntax Description

show

Show running system information

port-channel

Configure port channel parameters

load-balance

Show port-channel load balance

hardware

ASIC hardware based information

forwarding-path

Packet forwarding information

interface

Specify a port-channel number

ch-id

Port-Channel name

hgig

Higig hashing result (only with RTAG7)

source-interface

Source interface - Required paramter

if-id

Interface name

vlan

VLAN of the ingress packet i.e. when available

vlan-id

src-mac

Source MAC Address

src-mac

Source MAC address

dst-mac

Destination MAC Address

dst-mac

Destination MAC address

src-ip

Source IPv4 address

src-ip

Source IP address in format i.i.i.i

dst-ip

Destination IPv4 address

dst-ip

Destination IP address in format i.i.i.i

src-ipv6

Source IPv6 address

dst-ipv6

Destination IPv6 address

l4-src-port

Source L4 port

l4-src-port

Source L4 port

l4-dst-port

Destination l4 port

l4-dst-port

Destination L4 port

ethertype

Ethertype of the packet stream

ethertype

protocol

Protocol

prot

module

(Optional) Module #

module

(Optional)

fex

(Optional) FEX devices

fex-range

(Optional) FEX device range

hgig-tgid

(Optional) Higig #

tgid

(Optional)

__readonly__

(Optional)

loadbalance-algorithm

(Optional) load balance algorithm

algorithm

(Optional) load balance algorithm

outgoing-port-id

(Optional) outgoing port-id

port

(Optional) outgoing port-id

Command Mode

- /exec

show port-channel rbh-distribution

show port-channel rbh-distribution [ interface <if0> ] [ __readonly__ TABLE_channel <chan-id> <port> { <rbh> } + <num_of_buckets> ]

Syntax Description

show

Show running system information

port-channel

Show port-channel information

rbh-distribution

Show RBH distribution for member ports

interface

(Optional) Specify a port-channel interface

if0

(Optional)

__readonly__

(Optional)

TABLE_channel

(Optional) Port-channel table

chan-id

(Optional) Channel ID

port

(Optional) Member port

num_of_buckets

(Optional) Channel ID

rbh

(Optional) Channel ID

Command Mode

- /exec

show port-channel summary

show port-channel summary [ interface <if0> | controller ] [ __readonly__ TABLE_channel <group> <port-channel> <layer> <status> <type> <prtcl> [ { TABLE_member <port> <port-status> } ] ]

Syntax Description

show

Show running system information

port-channel

Show port-channel information

summary

Show port-channel summary

interface

(Optional) Specify a port-channel

if0

(Optional)

controller

(Optional) Show controller configured port-channels

__readonly__

(Optional)

TABLE_channel

(Optional) Port-channel table

group

(Optional) Channel group number

port-channel

(Optional) Port channel

type

(Optional) Channel type

prtcl

(Optional) Channel protocol

status

(Optional) Channel status

layer

(Optional) Channel layer info

TABLE_member

(Optional) Member table

port

(Optional) Member port

port-status

(Optional) Member port status

Command Mode

- /exec

show port-channel traffic

show port-channel traffic [ interface <if0> ] [ __readonly__ TABLE_channel <chanId> <port> <rx-ucst> <tx-ucst> <rx-mcst> <tx-mcst> <rx-bcst> <tx-bcst> ]

Syntax Description

show

Show running system information

port-channel

Show port-channel information

traffic

Show port-channel traffic statistics

__readonly__

(Optional)

interface

(Optional) Specify a port-channel

if0

(Optional)

TABLE_channel

(Optional) Port-channel table

chanId

(Optional) Channel ID

port

(Optional) Member port

rx-ucst

(Optional) Received unicast

tx-ucst

(Optional) Transmitted unicast

rx-mcst

(Optional) Received multicast

tx-mcst

(Optional) Tranmitted multicast

rx-bcst

(Optional) Received broadcast

tx-bcst

(Optional) Transmitted broadcast

Command Mode

- /exec

show port-channel usage

show port-channel usage [ __readonly__ <total-channel-number-used> { <used-range-low> [ <used-range-hi> ] } + { <unused-range-low> [ <unused-range-hi> ] } + ]

Syntax Description

show

Show running system information

port-channel

Show port-channel information

usage

Show port-channel number usage

__readonly__

(Optional)

total-channel-number-used

(Optional) Total used number of port-channels

used-range-low

(Optional) Used range low end value

used-range-hi

(Optional) Used range high end value

unused-range-low

(Optional) Un-used range low end value

unused-range-hi

(Optional) Un-used range high end value

Command Mode

- /exec

show port-license

show port-license [ __readonly__ <consumed_port_licenses> [ TABLE_portlicense <interface> <cookie> <port_activation_license> ] ]

Syntax Description

show

Show running system information

port-license

Show port license information

__readonly__

(Optional)

consumed_port_licenses

(Optional) Consumed port licenses

TABLE_portlicense

(Optional) port and licenses

interface

(Optional) interface name

cookie

(Optional) cookie

port_activation_license

(Optional) license state

Command Mode

- /exec

show port-profile

show port-profile [ name <all_profile_name> ] [ __readonly__ TABLE_port_profile_all <profile_name> [ <profile_id> ] <type> [ <desc> ] [ <status> ] [ <max_ports> ] [ <min_ports> ] [ <inherit> ] [ <profile_cfg> ] + [ <cmd_depth> ] [ <cmd_key> ] [ <parent_seqno> ] [ <cmd_seqno> ] [ <cmd_attr> ] [ <form_type> ] [ <cmd_mask> ] [ <shadow_cmd> ] [ <cmd_flags> ] [ <eval_cfg> ] + [ <intf> ] + [ <cap_l3> ] [ <cap_iscsi> ] [ <ctrl_sgid> ] [ <pkt_sgid> ] [ <sys_vlans> ] [ <portgrp> ] [ <pprole> ] [ <port_binding> ] ]

Syntax Description

show

Show running system information

port-profile

Show port-profile

name

(Optional) port-profile name

all_profile_name

(Optional) Enter the name of the profile

__readonly__

(Optional)

TABLE_port_profile_all

(Optional)

profile_name

(Optional)

profile_id

(Optional)

type

(Optional)

desc

(Optional)

status

(Optional)

max_ports

(Optional)

min_ports

(Optional)

inherit

(Optional)

profile_cfg

(Optional)

cmd_depth

(Optional)

cmd_key

(Optional)

parent_seqno

(Optional)

cmd_seqno

(Optional)

cmd_attr

(Optional)

form_type

(Optional)

cmd_mask

(Optional)

shadow_cmd

(Optional)

cmd_flags

(Optional)

eval_cfg

(Optional)

intf

(Optional)

cap_l3

(Optional) L3 Profile

cap_iscsi

(Optional) iSCSI cap

ctrl_sgid

(Optional) Control Vlan Pinned Sgid

pkt_sgid

(Optional) Packet Vlan Pinned Sgid

sys_vlans

(Optional) System Vlans

portgrp

(Optional) VMware Portgroup

pprole

(Optional) Port-profile Role

port_binding

(Optional) Port-binding

Command Mode

- /exec

show port-profile brief

show port-profile brief [ __readonly__ { TABLE_port_profile [ <profile_name> ] [ <type> ] [ <status> ] [ <profile_cfg_cnt> ] [ <eval_cfg_cnt> ] [ <intf_cnt> ] [ <inherit_cnt> ] [ <header_flag> ] } { TABLE_intf_count [ <intf_type> ] [ <intf_count> ] [ <tot_header_flag> ] } ]

Syntax Description

show

Show running system information

port-profile

Show port-profile

brief

Brief info about profiles

__readonly__

(Optional)

profile_name

(Optional)

TABLE_port_profile

(Optional)

type

(Optional)

status

(Optional)

profile_cfg_cnt

(Optional)

eval_cfg_cnt

(Optional)

intf_cnt

(Optional)

inherit_cnt

(Optional)

header_flag

(Optional)

TABLE_intf_count

(Optional)

intf_type

(Optional)

intf_count

(Optional)

tot_header_flag

(Optional)

Command Mode

- /exec

show port-profile expand-interface

show port-profile expand-interface [ name <all_profile_name> ] [ __readonly__ TABLE_port_profile <profile_name> [ TABLE_interface <intf> [ <intf_cfg> ] + ] ]

Syntax Description

show

Show running system information

port-profile

Show port-profile

expand-interface

Active profile config applied in a interface

name

(Optional) port-profile name

all_profile_name

(Optional) Enter the name of the profile

__readonly__

(Optional)

TABLE_port_profile

(Optional)

profile_name

(Optional)

TABLE_interface

(Optional)

intf

(Optional)

intf_cfg

(Optional)

Command Mode

- /exec

show port-profile sync-status

show port-profile sync-status [ interface <intfname> ] [ __readonly__ <intf> + <status> + [ <inherit> ] [ <sync_status> ] [ <cached_cmds> ] [ <errors> ] [ <recovery> ] ]

Syntax Description

show

Show running system information

port-profile

Show port-profile

sync-status

Interfaces out-of-sync with port-profiles

interface

(Optional) Interface name

intfname

(Optional) Name of interface

__readonly__

(Optional)

intf

(Optional)

status

(Optional)

inherit

(Optional)

sync_status

(Optional)

cached_cmds

(Optional)

errors

(Optional)

recovery

(Optional)

Command Mode

- /exec

show port-profile usage

show port-profile usage [ name <all_profile_name> ] [ __readonly__ TABLE_port_profile <profile_name> [ TABLE_interface <interface> ] ]

Syntax Description

show

Show running system information

port-profile

Show port-profile

usage

List of interfaces inherited a profile

name

(Optional) port-profile name

all_profile_name

(Optional) Enter the name of the profile

__readonly__

(Optional)

TABLE_port_profile

(Optional)

TABLE_interface

(Optional)

profile_name

(Optional)

interface

(Optional)

Command Mode

- /exec

show port-security

show port-security [ __readonly__ { TABLE_eth_port_sec_interfaces <secure_port> <max_secure_addr> <current_addr> <security_violation> <security_action> <num_val> <num_elems> <cmdid_show_index> <port_state> } <total_addr> <max_sys_limit> ]

Syntax Description

port-security

Show secure port information

__readonly__

(Optional)

TABLE_eth_port_sec_interfaces

(Optional) Displays the secured interfaces

secure_port

(Optional) Interface Index

max_secure_addr

(Optional) Maximum number of secured MAC addresses

current_addr

(Optional) Number of secured MAC addresses

security_violation

(Optional) Number of security violations

security_action

(Optional) Security Action Shutdown/Restrict/Protect

num_val

(Optional) Number of Values

num_elems

(Optional) Number of Elements

cmdid_show_index

(Optional) Index for the Interfaces

port_state

(Optional) Port security enabled or disabled

total_addr

(Optional) Total number of secured MAC addresses

max_sys_limit

(Optional) Maximum allowed MACs excluding one per port

Command Mode

- /exec

show port-security address

show port-security address [ __readonly__ { TABLE_eth_port_sec_mac_addrs <vlan_id> <mac_addr> <type> <if_index> <remain_age> <remote_learnt> <remote_aged> <num_elems> <cmd_addr_index> } <total_addr> <max_sys_limit> ]

Syntax Description

port-security

Show secure port information

address

Show secure address

__readonly__

(Optional)

TABLE_eth_port_sec_mac_addrs

(Optional) Displays the secured MAC addresses

if_index

(Optional) Interface index

vlan_id

(Optional) vlan id

mac_addr

(Optional) mac address

type

(Optional) static/sticky/dyanmic MAC address

remain_age

(Optional) Remaining age

remote_learnt

(Optional) Remotely learnt

remote_aged

(Optional) Remotely Aged Out

num_elems

(Optional) Number of Elements

cmd_addr_index

(Optional) Index for the interface address

total_addr

(Optional) Total number of secured MAC addresses

max_sys_limit

(Optional) Maximum allowed MACs excluding one per port

Command Mode

- /exec

show port-security address blocked

show port-security address blocked [ __readonly__ { TABLE_eth_port_sec_mac_addrs <vlan_id> <mac_addr> <type> <if_index> <remain_age> <num_elems> <cmd_addr_index> } <total_addr> <max_sys_limit> ]

Syntax Description

port-security

Show secure port information

address

Show secure address

blocked

Port Security Blocked macs

__readonly__

(Optional)

TABLE_eth_port_sec_mac_addrs

(Optional) Displays the secured MAC addresses

if_index

(Optional) Interface index

vlan_id

(Optional) vlan id

mac_addr

(Optional) mac address

type

(Optional) static/sticky/dyanmic MAC address

remain_age

(Optional) Remaining age

num_elems

(Optional) Number of Elements

cmd_addr_index

(Optional) Index for the interface address

total_addr

(Optional) Total number of secured MAC addresses

max_sys_limit

(Optional) Maximum allowed MACs excluding one per port

Command Mode

- /exec

show port-security address interface

show port-security address interface <interface-id> [ __readonly__ { TABLE_eth_port_sec_mac_addrs <vlan_id> <mac_addr> <type> <if_index> <remain_age> <remote_learnt> <remote_aged> <num_elems> } <total_addr> <max_sys_limit> <first> ]

Syntax Description

port-security

Show secure port information

address

Show secure address

interface

Show secure interface

interface-id

ethernet

__readonly__

(Optional)

TABLE_eth_port_sec_mac_addrs

(Optional) Displays the secured MAC addresses

if_index

(Optional) Interface index

vlan_id

(Optional) vlan id

mac_addr

(Optional) mac address

type

(Optional) static/sticky/dyanmic MAC address

remain_age

(Optional) Remaining age

remote_learnt

(Optional) Remotely learnt

remote_aged

(Optional) Remotely Aged Out

num_elems

(Optional) Number of Elements

total_addr

(Optional) Total number of secured MAC addresses

max_sys_limit

(Optional) Maximum allowed MACs excluding one per port

first

(Optional) To identify the first entry

Command Mode

- /exec

show port-security address nvram

show port-security address nvram [ __readonly__ { TABLE_eth_port_sec_mac_addrs <vlan_id> <mac_addr> <type> <if_index> <remain_age> <remote_learnt> <remote_aged> <num_elems> <cmd_addr_index> } <total_addr> <max_sys_limit> ]

Syntax Description

port-security

Show secure port information

address

Show secure address

nvram

Port Security NVRAM

__readonly__

(Optional)

TABLE_eth_port_sec_mac_addrs

(Optional) Displays the secured MAC addresses

if_index

(Optional) Interface index

vlan_id

(Optional) vlan id

mac_addr

(Optional) mac address

type

(Optional) static/sticky/dyanmic MAC address

remain_age

(Optional) Remaining age

remote_learnt

(Optional) Remotely learnt

remote_aged

(Optional) Remotely Aged Out

num_elems

(Optional) Number of Elements

cmd_addr_index

(Optional) Index for the interface address

total_addr

(Optional) Total number of secured MAC addresses

max_sys_limit

(Optional) Maximum allowed MACs excluding one per port

Command Mode

- /exec

show port-security detail interface

show port-security detail interface [ __readonly__ { TABLE_eth_port_sec_intf_detail <if_index> <port_security> <port_status> <violation_mode> <aging_time> <aging_type> <max_mac_addr> <total_sec_addrs> <trap_count> <addr_aging_enable> <secure_last_mac_addr> <sticky_enable> <secure_last_mac_addr_vlan_id> } ]

Syntax Description

port-security

Show secure port information

detail

Show detailed information about secure interface

interface

Show secure interface

TABLE_eth_port_sec_intf_detail

(Optional) Displays the secured interface details

__readonly__

(Optional)

if_index

(Optional) Interface index

port_security

(Optional) Port Security is Enabled/Disabled

port_status

(Optional) Secure Up/Down

violation_mode

(Optional) Shutdown/Restrict/Protect

aging_time

(Optional) Aging time in minutes

aging_type

(Optional) Absolute/Inactivity

max_mac_addr

(Optional) Maximum number of MAC addresses that can be secured

total_sec_addrs

(Optional) Total number of secured MAC addresses

trap_count

(Optional) Trap Count

addr_aging_enable

(Optional) Specifies whether address aging is enabled

secure_last_mac_addr

(Optional) Secured last mac address

sticky_enable

(Optional) Specifies sticky feature is enabled on the port

secure_last_mac_addr_vlan_id

(Optional) Indicates the VLAN where the last MAC address seen on this interface

Command Mode

- /exec

show port-security interface

show port-security interface <interface-id> [ __readonly__ <config_port_security> <oper_port_security> <port_status> <violation_mode> <aging_time> <aging_type> <max_mac_addr> <total_sec_addrs> <conf_num_addrs> <num_sticky_addrs> <trap_count> ]

Syntax Description

port-security

Show secure port information

interface

Show secure interface

interface-id

ethernet

__readonly__

(Optional)

config_port_security

(Optional) Port Security configuration is Enabled/Disabled

oper_port_security

(Optional) Port Security is Operationally Enabled/Disabled

port_status

(Optional) Secure Up/Down

violation_mode

(Optional) Shutdown/Restrict/Protect

aging_time

(Optional) Aging time in minutes

aging_type

(Optional) Absolute/Inactivity

max_mac_addr

(Optional) Configured Maximum

total_sec_addrs

(Optional) Total number of secured MAC addresses

conf_num_addrs

(Optional) Number of configured MAC addresses

num_sticky_addrs

(Optional) Number of sticky MAC addresses

trap_count

(Optional) Trap Count

Command Mode

- /exec

show port-security multivlan address

show port-security multivlan address [ __readonly__ { TABLE_eth_port_sec_multi_vlan <if_index> <vlan_id> <max_sec_mac_addr_count> <cur_sec_mac_addr_count> } ]

Syntax Description

port-security

Show secure port information

address

Show secure address

multivlan

Show port security information for a particular vlan in a multivlan port

__readonly__

(Optional)

TABLE_eth_port_sec_multi_vlan

(Optional) Displays the secured MAC addresses

if_index

(Optional) Interface index

vlan_id

(Optional) vlan id

max_sec_mac_addr_count

(Optional) The maximum number of MAC addresses to be secured in the vlan

cur_sec_mac_addr_count

(Optional) Current number of MAC addresses secured in the VLAN

Command Mode

- /exec

show port-security secure address

show port-security secure address [ __readonly__ { TABLE_eth_port_sec_if_vlan_secure_mac_addr <if_index> <mac_addr> <vlan_id> <mac_addr_type> <remain_age> } ]

Syntax Description

port-security

Show secure port information

secure

Show detail information about secure address

address

Show secure address

__readonly__

(Optional)

TABLE_eth_port_sec_if_vlan_secure_mac_addr

(Optional) Displays the secured MAC addresses

if_index

(Optional) Interface index

mac_addr

(Optional) mac address

vlan_id

(Optional) vlan id

mac_addr_type

(Optional) static/sticky/ MAC address

remain_age

(Optional) Remaining age

Command Mode

- /exec

show port-security state

show port-security state [ __readonly__ <status> ]

Syntax Description

port-security

Port security related command

state

port security state

__readonly__

(Optional)

status

(Optional) show port-security

Command Mode

- /exec

show port-security traps enable

show port-security traps enable [ __readonly__ { <snmp_traps_enable> } ]

Syntax Description

port-security

Show secure port information

traps

Enable SNMP traps

enable

enable

__readonly__

(Optional)

snmp_traps_enable

(Optional) SNMP traps enable/disable

Command Mode

- /exec

show port naming

show port naming

Syntax Description

show

Show running system information

port

Show port information

naming

Show port naming information

Command Mode

- /exec

show power inline

show power inline <if0> [ __readonly__ { TABLE_intf_info <intf_name> <admin> <oper> <supp_pwr> <del_pwr> <device> <class> <max> } ]

Syntax Description

show

Show running system information

power

Power over Ethernet

if0

__readonly__

(Optional)

TABLE_intf_info

(Optional) Interface information

intf_name

(Optional) Interface name

admin

(Optional) Port mode

oper

(Optional) Oper mode

supp_pwr

(Optional) Supplied power

del_pwr

(Optional) delivered power

device

(Optional) Device information

class

(Optional) POE Class

max

(Optional) Max power

Command Mode

- /exec

show power inline

show power inline [ __readonly__ { TABLE_fex_info <module_id> <avail_pwr> <used_pwr> <rem_pwr> } { TABLE_intf_info <intf_name> <admin> <oper> <supp_pwr> <del_pwr> <device> <class> <max> } ]

Syntax Description

show

Show running system information

power

Power over Ethernet

__readonly__

(Optional)

TABLE_fex_info

(Optional) FEX information

module_id

(Optional) FEX id

avail_pwr

(Optional) Available power

used_pwr

(Optional) Used power

rem_pwr

(Optional) Free power

TABLE_intf_info

(Optional) Interface information

intf_name

(Optional) Interface name

admin

(Optional) Port mode

oper

(Optional) Oper mode

supp_pwr

(Optional) Supplied power

del_pwr

(Optional) delivered power

device

(Optional) Device information

class

(Optional) POE Class

max

(Optional) Max power

Command Mode

- /exec

show power inline police

show power inline police [ __readonly__ { TABLE_police <intf_name> <admin> <oper> <admin_police> <oper_police> <cutoff_pwr> <oper_pwr> } ]

Syntax Description

show

Show running system information

power

Power over Ethernet

police

Show per-port policing

__readonly__

(Optional)

TABLE_police

(Optional) Police information

intf_name

(Optional) Interface name

admin

(Optional) Port mode

oper

(Optional) Oper mode

admin_police

(Optional) Configured admin police

oper_police

(Optional) Current police

cutoff_pwr

(Optional) Cutoff power

oper_pwr

(Optional) Oper power

Command Mode

- /exec

show power inline priority

show power inline priority [ __readonly__ { TABLE_priority <intf_name> <admin> <oper> <priority> } ]

Syntax Description

show

Show running system information

power

Power over Ethernet

priority

Show per-port priority

__readonly__

(Optional)

TABLE_priority

(Optional) Port priority information

intf_name

(Optional) Interface name

admin

(Optional) Port mode

oper

(Optional) Oper mode

priority

(Optional) port priority

Command Mode

- /exec

show privilege

show privilege

Syntax Description

show

Show running system information

privilege

Display privilege information

Command Mode

- /exec

show processes

show processes [ __readonly__ { [ TABLE_processes <pid> <state> <pc> <start_cnt> <tty> <p_type> <process> ] } ]

Syntax Description

show

Show running system information

processes

Show processes

__readonly__

(Optional)

TABLE_processes

(Optional) all process information

pid

(Optional) process id

state

(Optional) process state

pc

(Optional) pc register

start_cnt

(Optional) TBD

tty

(Optional) TBD

p_type

(Optional) process type

process

(Optional) process name

Command Mode

- /exec

show processes cpu

show processes cpu [ sort ] [ __readonly__ { [ TABLE_process_cpu <pid> <runtime> <invoked> <usecs> <onesec> <process> ] [ <user_percent> ] [ <kernel_percent> ] [ <idle_percent> ] } ]

Syntax Description

show

Show running system information

processes

Show processes

cpu

Show processes CPU Info

sort

(Optional) Show processes CPU Info (Sorted by Cpu Util with time base)

__readonly__

(Optional)

TABLE_process_cpu

(Optional) all process memory

pid

(Optional) process id

runtime

(Optional) Runtime

invoked

(Optional) Invoked

usecs

(Optional) usecs

onesec

(Optional) fivesec

process

(Optional) name of the process

user_percent

(Optional) user

kernel_percent

(Optional) kernel

idle_percent

(Optional) idle

Command Mode

- /exec

show processes cpu history

show processes cpu history

Syntax Description

show

Show running system information

processes

Show processes

cpu

Show processes CPU Info

history

Show processes CPU Util History

Command Mode

- /exec

show processes cpu history data

show processes cpu history data [ __readonly__ { [ TABLE_processes_cpu_history <cpu_avg_sec> ] } ]

Syntax Description

show

Show running system information

processes

Show processes

cpu

Show processes CPU Info

history

Show processes CPU Util History

data

Display the CPU util as data, instead of graph

__readonly__

(Optional)

TABLE_processes_cpu_history

(Optional) 60 sec cpu history

cpu_avg_sec

(Optional) cpu avg for a sec

Command Mode

- /exec

show processes cpu module

show processes cpu module <i0> [ __readonly__ { [ TABLE_process_cpu <pid> <runtime> <invoked> <usecs> <onesec> <process> ] [ <user_percent> ] [ <kernel_percent> ] [ <idle_percent> ] } ]

Syntax Description

show

Show running system information

processes

Show processes

cpu

Show processes CPU Info

module

processes CPU Info

i0

module number

__readonly__

(Optional)

TABLE_process_cpu

(Optional) all process memory

pid

(Optional) process id

runtime

(Optional) Runtime

invoked

(Optional) Invoked

usecs

(Optional) usecs

onesec

(Optional) onesec

process

(Optional) name of the process

user_percent

(Optional) user

kernel_percent

(Optional) kernel

idle_percent

(Optional) idle

Command Mode

- /exec

show processes log

show processes log [ __readonly__ { [ TABLE_processes_log <vdc> <process> <pid> <normal_exit> <stack> <core> <create_time> ] } ]

Syntax Description

show

Show running system information

processes

Show processes

log

Show information about process logs

__readonly__

(Optional)

TABLE_processes_log

(Optional) all processes log

vdc

(Optional) vdc

process

(Optional) vdc process name

pid

(Optional) pid

normal_exit

(Optional) process exit

stack

(Optional) stack

core

(Optional) core

create_time

(Optional) log create time

Command Mode

- /exec

show processes log details

show processes log details [ __readonly__ { line_in_log_detail <line_in_file> } ]

Syntax Description

show

Show running system information

processes

Show processes

log

Show information about process logs

details

Show detail of all logs with stack

__readonly__

(Optional)

line_in_log_detail

(Optional)

line_in_file

(Optional) each line

Command Mode

- /exec

show processes log pid

show processes log pid <i0> [ __readonly__ { TABLE_line_in_log_pid <line_in_file> } ]

Syntax Description

show

Show running system information

processes

Show processes

log

Show information about process logs

pid

Show detail log info about a specific process

i0

pid of the process

__readonly__

(Optional)

TABLE_line_in_log_pid

(Optional)

line_in_file

(Optional) each line

Command Mode

- /exec

show processes log vdc-all

show processes log vdc-all [ __readonly__ { [ TABLE_processes_log_vdc_all <vdc> <process> <pid> <normal_exit> <stack> <core> <create_time> ] } ]

Syntax Description

TABLE_processes_log_vdc_all

(Optional) all processes log vdc all

show

Show running system information

processes

Show processes

log

Show information about process logs

vdc-all

Show information about process logs in all vdc's

__readonly__

(Optional)

vdc

(Optional) vdc process name

process

(Optional) vdc process name

pid

(Optional) process id

normal_exit

(Optional) process exit

stack

(Optional) stack

core

(Optional) core

create_time

(Optional) log create time

Command Mode

- /exec

show processes memory

show processes memory [ __readonly__ { TABLE_process_memory <mem_pid> <mem_alloc> <mem_limit> <mem_used> <stack_base_ptr> <process> } ]

Syntax Description

show

Show running system information

processes

Show processes

memory

Show processes Memory Info

__readonly__

(Optional)

TABLE_process_memory

(Optional) all process memory

mem_pid

(Optional) process id

mem_alloc

(Optional) allocated memory

mem_limit

(Optional) memory limit

mem_used

(Optional) memory used

stack_base_ptr

(Optional) stack and base pointer

process

(Optional) name of the process

Command Mode

- /exec

show processes memory clis

show processes memory clis [ shared | private ]

Syntax Description

show

Show running system information

processes

Display process information

memory

Display memory information

clis

shared

(Optional) Display CLIS shared memory information

private

(Optional) Display CLIS private memory information

Command Mode

- /exec

show processes memory physical

show processes memory physical [ __readonly__ { TABLE_process_physical_memory <processid> <virtual> <physical> <rss> <processname> } ]

Syntax Description

show

Show running system information

processes

Show processes

memory

Show processes Memory Info

physical

Show processes physical Memory

__readonly__

(Optional)

TABLE_process_physical_memory

(Optional) all process physical memory

processid

(Optional) process id

virtual

(Optional) virtual allocated memory

physical

(Optional) physical memory used

rss

(Optional) rss memory

processname

(Optional) name of the process

Command Mode

- /exec

show processes memory shared

show processes memory shared [ detail | dynamic ] [ __readonly__ TABLE_process_tag [ <process-tag-out> ] [ <process-memory-share-dynamic-component-str> ] [ <process-memory-share-dynamic-shared-memory-str> ] [ <process-memory-share-dynamic-current-size-str> ] [ <process-memory-share-dynamic-max-size-str> ] [ <process-memory-share-dynamic-used-str> ] [ <process-memory-share-component-str> ] [ <process-memory-share-shared-memory-str> ] [ <process-memory-share-size-str> ] [ <process-memory-share-used-str> ] [ <process-memory-share-available-str> ] [ <process-memory-share-ref-str> ] [ <process-memory-share-byte-set-address-str> ] [ <process-memory-share-byte-set-count-str> ] [ <process-memory-share-address-str> ] [ <process-memory-share-kbytes-1-str> ] [ <process-memory-share-kbytes-2-str> ] [ <process-memory-share-kbytes-3-str> ] [ <process-memory-share-count-str> ] [ { TABLE_SMMITEM <process-memory-share-smr-name> } ] [ { TABLE_SHOWPROC <process-memory-share-table-showproc-key> [ { TABLE_SHOWONEDYNAMIC [ <process-memory-share-component> ] [ <process-memory-share-shared-memory> ] [ <process-memory-share-current-size> ] [ <process-memory-share-max-size> ] [ <process-memory-share-used> ] } ] [ { TABLE_ONEITEM [ <process-memory-share-proc-smr-name> ] [ <process-memory-share-smr-addr> ] [ <process-memory-share-smr-size> ] [ <process-memory-share-smr-star-char> ] [ <process-memory-share-smr-empty-char> ] [ <process-memory-share-smr-used> ] [ <process-memory-share-smr-avail> ] [ <process-memory-share-smr-ref-count> ] [ <process-memory-share-dynamic-smr-name> ] } ] [ { TABLE_ONEITEMDYNAMIC [ <process-memory-share-dynamic-smr-addr> ] [ <process-memory-share-dynamic-smr-size> ] [ <process-memory-share-dynamic-plus-char> ] [ <process-memory-share-max-mem-size-str> ] [ <process-memory-share-dynamic-smr-used> ] [ <process-memory-share-dynamic-smr-avail> ] [ <process-memory-share-dynamic-smr-ref-count> ] [ <process-memory-share-region-smr-name> ] } ] } ] [ <process-memory-share-total-shm-size> ] [ <process-memory-share-total-shm-used> ] [ <process-memory-share-total-shm-avail> ] ]

Syntax Description

show

Show running system information

processes

Display process information

memory

Display memory information

shared

Display shared memory info

detail

(Optional) Display shared memory in bytes instead of default kbytes

dynamic

(Optional) Display details of dynamic shared memory segments

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

process-memory-share-dynamic-component-str

(Optional)

process-memory-share-dynamic-shared-memory-str

(Optional)

process-memory-share-dynamic-current-size-str

(Optional)

process-memory-share-dynamic-max-size-str

(Optional)

process-memory-share-dynamic-used-str

(Optional)

process-memory-share-component-str

(Optional)

process-memory-share-shared-memory-str

(Optional)

process-memory-share-size-str

(Optional)

process-memory-share-used-str

(Optional)

process-memory-share-available-str

(Optional)

process-memory-share-ref-str

(Optional)

process-memory-share-byte-set-address-str

(Optional)

process-memory-share-byte-set-count-str

(Optional)

process-memory-share-address-str

(Optional)

process-memory-share-kbytes-1-str

(Optional)

process-memory-share-kbytes-2-str

(Optional)

process-memory-share-kbytes-3-str

(Optional)

process-memory-share-count-str

(Optional)

TABLE_SMMITEM

(Optional)

process-memory-share-smr-name

(Optional)

TABLE_SHOWPROC

(Optional)

process-memory-share-table-showproc-key

(Optional)

TABLE_SHOWONEDYNAMIC

(Optional)

process-memory-share-component

(Optional)

process-memory-share-shared-memory

(Optional)

process-memory-share-current-size

(Optional)

process-memory-share-max-size

(Optional)

process-memory-share-used

(Optional)

TABLE_ONEITEM

(Optional)

process-memory-share-proc-smr-name

(Optional)

process-memory-share-smr-addr

(Optional)

process-memory-share-smr-size

(Optional)

process-memory-share-smr-star-char

(Optional)

process-memory-share-smr-empty-char

(Optional)

process-memory-share-smr-used

(Optional)

process-memory-share-smr-avail

(Optional)

process-memory-share-smr-ref-count

(Optional)

TABLE_ONEITEMDYNAMIC

(Optional)

process-memory-share-dynamic-smr-name

(Optional)

process-memory-share-dynamic-smr-addr

(Optional)

process-memory-share-dynamic-smr-size

(Optional)

process-memory-share-dynamic-plus-char

(Optional)

process-memory-share-max-mem-size-str

(Optional)

process-memory-share-dynamic-smr-used

(Optional)

process-memory-share-dynamic-smr-avail

(Optional)

process-memory-share-dynamic-smr-ref-count

(Optional)

process-memory-share-region-smr-name

(Optional)

process-memory-share-total-shm-size

(Optional)

process-memory-share-total-shm-used

(Optional)

process-memory-share-total-shm-avail

(Optional)

Command Mode

- /exec

show processes vdc

show processes vdc <e-vdc2> [ __readonly__ { TABLE_processes_vdc <pid> <state> <pc> <start_cnt> <tty> <p_type> <process> } ]

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

__readonly__

(Optional) Read only

TABLE_processes_vdc

(Optional) All process information

pid

(Optional) PID of process

state

(Optional) State of process

pc

(Optional) PC in which process exists

start_cnt

(Optional) TBD

tty

(Optional) TBD

p_type

(Optional) Type of Process

process

(Optional) Process Name

Command Mode

- /exec

show processes vdc cpu

show processes vdc <e-vdc2> cpu [ __readonly__ [ TABLE_process_vdc_cpu <pid> <runtime> <invoked> <usecs> <onesec> <process> ] [ <user_percent> ] [ <kernel_percent> ] [ <idle_percent> ] ]

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

cpu

Show processes CPU Info

__readonly__

(Optional) Readonly table for cpu log

TABLE_process_vdc_cpu

(Optional) All cpu process logs of vdc

pid

(Optional) PID of process

runtime

(Optional) Runtime

invoked

(Optional) Invoked

usecs

(Optional) uSecs

onesec

(Optional) fivesec

process

(Optional) Name of process

user_percent

(Optional) user

kernel_percent

(Optional) kernel

idle_percent

(Optional) idle

Command Mode

- /exec

show processes vdc log

show processes vdc <e-vdc2> log [ __readonly__ { [ TABLE_processes_vdc_log <vdc> <process> <pid> <normal_exit> <stack> <core> <create_time> ] } ]

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

log

Show information about process logs

__readonly__

(Optional) Read only table

TABLE_processes_vdc_log

(Optional) Table for log of all VDC Processes

pid

(Optional) PID of process

vdc

(Optional) VDC Number

process

(Optional) Process name

normal_exit

(Optional) Normal Exit status

stack

(Optional) Stack

core

(Optional) Core

create_time

(Optional) Time stamp of log

Command Mode

- /exec

show processes vdc log details

show processes vdc <e-vdc2> log details

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

log

Show information about process logs

details

Show detail of all logs with stack

Command Mode

- /exec

show processes vdc log pid

show processes vdc <e-vdc2> log pid <i1>

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

log

Show information about process logs

pid

Show detail log info about a specific process

i1

pid of the process

Command Mode

- /exec

show processes vdc memory

show processes vdc <e-vdc2> memory [ __readonly__ { [ TABLE_process_memory <mem_pid> <mem_alloc> <mem_limit> <mem_used> <stack_base_ptr> <process> ] [ <sum_mem_malloced> ] } ]

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

memory

Show processes Memory Info

__readonly__

(Optional)

TABLE_process_memory

(Optional) all process memory

mem_pid

(Optional) process id

mem_alloc

(Optional) allocated memory

mem_limit

(Optional) memory limit

mem_used

(Optional) memory used

stack_base_ptr

(Optional) stack and base pointer

process

(Optional) name of the process

Command Mode

- /exec

show processes version

show processes { version | threads } [ <comp-string> ] [ __readonly__ TABLE_component <component-name> <version> <buildinfo> <sourceversion> ]

Syntax Description

show

Show running system information

processes

Display process information

version

Display system release information

threads

Threads Info

comp-string

(Optional) Component name for detailed information

__readonly__

(Optional)

TABLE_component

(Optional)

component-name

(Optional)

version

(Optional)

buildinfo

(Optional)

sourceversion

(Optional)

Command Mode

- /exec

show pss debug

show pss debug

Syntax Description

show

Show running system information

pss

display pss information

debug

display pss debug configuration

Command Mode

- /exec

show ptp brief

show ptp brief [ __readonly__ <gptp-flag> [ TABLE_ptp <ptp-ifindex> <state> [ <dot1as-capable> ] ] <ptp-end> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

brief

port states in brief

__readonly__

(Optional) Read Only

gptp-flag

(Optional) GPTP mode

TABLE_ptp

(Optional) ptp table

ptp-ifindex

(Optional) ptp ifindex

state

(Optional) BMC state

dot1as-capable

(Optional) Dot1AS capable

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp clock

show ptp clock [ __readonly__ <clock-id> <domain-id> <num-ports> <priority1> <priority2> <class> <accuracy> <scaled-log-variance> <offset-from-master> <mean-path-delay-to-master> <steps-removed> <device-type> <encap> <two-step-clock> <src-ip> <slave-only> [ <correction-threshold> ] [ <mean-path-delay-threshold> ] [ <gmTimeBaseIndicator> ] [ <last_gm_phase_change> ] [ <master_cum_scaled_rate_offset> ] [ <scaled_last_gm_freq_change> ] [ <cum_scaled_rate_offset> ] <local-clock-time> <bs-status> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

clock

Set local clock attributes

__readonly__

(Optional) Read only

domain-id

(Optional) Domain Id

clock-id

(Optional) Clock Id

priority1

(Optional) Priority 1

priority2

(Optional) Priority 2

num-ports

(Optional) Number of PTP ports

class

(Optional) Class

accuracy

(Optional) Clock accuracy

scaled-log-variance

(Optional) scaled log variance

offset-from-master

(Optional) Offset from master

mean-path-delay-to-master

(Optional) mean path delay to master

steps-removed

(Optional) Steps removed

device-type

(Optional) Device Type

encap

(Optional) Encapsulation

src-ip

(Optional) IPv4 address (A.B.C.D) of source (in layer-3 encapsulation)

two-step-clock

(Optional) Two-step clock operation

slave-only

(Optional) Slave-only mode

correction-threshold

(Optional) correction-threshold

mean-path-delay-threshold

(Optional) mean-path-delay threshold

gmTimeBaseIndicator

(Optional) time base indicator for current GM

last_gm_phase_change

(Optional) time difference of current and previous GM

master_cum_scaled_rate_offset

(Optional) cumulative scaled rate offset received from master

scaled_last_gm_freq_change

(Optional) scaled last GM frequency change

cum_scaled_rate_offset

(Optional) cumulative scaled rate offset

local-clock-time

(Optional) Local clock time

bs-status

(Optional) Broadsync status enable/disable

Command Mode

- /exec

show ptp clock foreign-masters record

show ptp clock foreign-masters record [ interface <if0> ] [ __readonly__ [ TABLE_ptp <interface-name> <clock-id> <priority1> <priority2> <class> <accuracy> <scaled-log-variance> <steps-removed> <is-gm> ] <ptp-end> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

clock

Set local clock attributes

foreign-masters

foreign-masters

record

record

if0

(Optional)

__readonly__

(Optional) Read only

TABLE_ptp

(Optional) ptp table

interface-name

(Optional) interface name

clock-id

(Optional) Clock Id

priority1

(Optional) Priority 1

priority2

(Optional) Priority 2

class

(Optional) Class

accuracy

(Optional) Clock accuracy

scaled-log-variance

(Optional) scaled log variance

steps-removed

(Optional) Steps removed

is-gm

(Optional) Is Grandmaster

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp corrections

show ptp corrections [ __readonly__ [ TABLE_ptp <intf-name> <sup-time> <correction-val> <mean-path-delay> ] <ptp-end> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

__readonly__

(Optional) Read Only

corrections

Display last few corrections

TABLE_ptp

(Optional) ptp table

intf-name

(Optional) interface name

sup-time

(Optional) sup time

correction-val

(Optional) correction value

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp cost

show ptp cost [ interface <if0> ] [ __readonly__ [ TABLE_ptp <ptp-ifindex> <cost> ] <ptp-end> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

cost

port costs

if0

(Optional)

__readonly__

(Optional) Read Only

TABLE_ptp

(Optional) ptp table

ptp-ifindex

(Optional) ptp ifindex

cost

(Optional) cost

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp counters interface

show ptp counters { interface <if0> | all } [ { detail | ipv4 <ip> } ] [ __readonly__ [ TABLE_ptp <interface_name> [ <accepted-ip> ] <tx-announce-pkts> <rx-announce-pkts> <tx-sync-pkts> <rx-sync-pkts> <tx-follow-up-pkts> <rx-follow-up-pkts> <tx-delay-req-pkts> <rx-delay-req-pkts> <tx-delay-resp-pkts> <rx-delay-resp-pkts> <tx-pdelay-req-pkts> <rx-pdelay-req-pkts> <tx-pdelay-resp-pkts> <rx-pdelay-resp-pkts> <tx-pdelay-follow-up-pkts> <rx-pdelay-follow-up-pkts> [ <tx-mgmt-pkts> ] [ <rx-mgmt-pkts> ] ] <ptp-end> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

__readonly__

(Optional) Read Only

counters

Display PTP packet counters

interface

Enter the port interface

all

Displays all information

if0

detail

(Optional) Show detail

ipv4

(Optional) IP address for the stat info

ip

(Optional) IPv4 address (A.B.C.D)

TABLE_ptp

(Optional) ptp table

interface_name

(Optional) interface name

accepted-ip

(Optional) Accepted IP in unicast mode

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp delay summary

show ptp delay summary [ __readonly__ { TABLE_ptp <intf-name-port> <device-type> <state> <link-delay> } <ptp-end> <gptp-not-supported> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

delay

delay

summary

summary

__readonly__

(Optional) Read only

TABLE_ptp

(Optional) ptp table

intf-name-port

(Optional) interface name and port

device-type

(Optional) Device Type

state

(Optional) BMC state

link-delay

(Optional) link delay

ptp-end

(Optional) End of table

gptp-not-supported

(Optional) GPTP not supported

Command Mode

- /exec

show ptp domain data

show ptp domain data [ __readonly__ [ TABLE_ptp <multidom_cap> <gm_cap> <gm_convergence_time> <def_dom> <transition_priority1> <transition_priority2> { TABLE_ptp_domain <domain_number> <domain_priority> <ptp_clock_class_threshold> <ptp_clock_accuracy_threshold> <ptp-ifindex> } ] <ptp-end> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

domain

ptp domain number

data

ptp domain data

__readonly__

(Optional) Read Only

TABLE_ptp

(Optional) ptp table

multidom_cap

(Optional) Multidomain state ENABLED/DISABLED

gm_cap

(Optional) GM state ENABLE/DISABLED

gm_convergence_time

(Optional) ptp grandmaster convergence time

def_dom

(Optional) ptp default domain

transition_priority1

(Optional) ptp multi-domain transition priority1

transition_priority2

(Optional) ptp multi-domain transition priority2

TABLE_ptp_domain

(Optional)

domain_number

(Optional) ptp domain number

domain_priority

(Optional) ptp domain priority

ptp_clock_class_threshold

(Optional) ptp domain class

ptp_clock_accuracy_threshold

(Optional) ptp domain accuracy

ptp-ifindex

(Optional) ptp ifindex

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp interface domain

show ptp interface domain [ __readonly__ [ TABLE_ptp <ptp-ifindex> <interface-domain> ] <ptp-end> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

interface

port

domain

ptp port domain

__readonly__

(Optional) Read Only

TABLE_ptp

(Optional) ptp table

ptp-ifindex

(Optional) ptp ifindex

interface-domain

(Optional) ptp port domain

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp packet-trace

show ptp packet-trace [ __readonly__ [ TABLE_ptp <intf-name> <sup-time> <pkt_dir> <pkt_type> <pkt_info> ] <ptp-header> <ptp-end> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

__readonly__

(Optional) Read Only

packet-trace

Display last few pkt traces

TABLE_ptp

(Optional) ptp table

intf-name

(Optional) interface name

sup-time

(Optional) sup time

pkt_dir

(Optional) pkt_dir

pkt_type

(Optional) pkt_type

pkt_info

(Optional) pkt_info

ptp-header

(Optional) Start of table

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp parent

show ptp parent [ __readonly__ <clock-id> <port-num> <obs-parent-offset> <obs-parent-clk-phase-chg> [ <parent-ip> ] <gm-id> <gm-class> <gm-accuracy> <gm-scaled-log-variance> <gm-priority1> <gm-priority2> [ TABLE-path-trace <path-trace-index> <path-trace-clock-id> ] ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

parent

parent clock

__readonly__

(Optional) Read only

clock-id

(Optional) Clock Id

port-num

(Optional) Port ID: port number

obs-parent-offset

(Optional) observed parent offset

obs-parent-clk-phase-chg

(Optional) observed parent clock phase change

parent-ip

(Optional) Parent clock IP

gm-id

(Optional) Grandmaster Id

gm-class

(Optional) Class

gm-accuracy

(Optional) Clock accuracy

gm-scaled-log-variance

(Optional) scaled log variance

gm-priority1

(Optional) GM Priority 1

gm-priority2

(Optional) GM Priority 2

TABLE-path-trace

(Optional) ptp path trace table

path-trace-index

(Optional) Clock Identity index

path-trace-clock-id

(Optional) Clock Identity in path trace

Command Mode

- /exec

show ptp port interface

show ptp port interface <if0> [ __readonly__ <intf-name> <clock-id> <port-num> <version> <transport-mode> <accepted-ip> <state> <vlan> <delay-req-intv> <ann-rx-tout> <peer-mean-path-delay> <ann-intv> <sync-intv> <delay-mechanism> <peer-delay-req-intv> <device-type> <encap> [ <prop-delay-thresh> ] [ <neighbor-rate-ratio> ] <cost> <int-domain-id> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

port

port

interface

Enter the port interface

if0

__readonly__

(Optional) Read only

intf-name

(Optional) interface name

clock-id

(Optional) Port ID: Clock Id

port-num

(Optional) Port ID: port number

version

(Optional) version

transport-mode

(Optional) Transport mode

accepted-ip

(Optional) Accepted IPs

state

(Optional) BMC state

vlan

(Optional) Vlan

delay-req-intv

(Optional) log mean delay req interval

ann-rx-tout

(Optional) announce receipt timeout

peer-mean-path-delay

(Optional) peer mean path delay

ann-intv

(Optional) announce interval

sync-intv

(Optional) sync interval

delay-mechanism

(Optional) delay mechanism

peer-delay-req-intv

(Optional) peer delay req interval

prop-delay-thresh

(Optional) propagation delay threshold

neighbor-rate-ratio

(Optional) Neighbor rate-ratio

cost

(Optional) Cost

int-domain-id

(Optional) domain id

device-type

(Optional) Device Type

encap

(Optional) Encapsulation

Command Mode

- /exec

show ptp time-property

show ptp time-property [ __readonly__ <current-utc-offset-valid> <current-utc-offset> <leap-59> <leap-61> <time-traceable> <freq-traceable> <ptp-timescale> <time-source> ]

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

time-property

time property

__readonly__

(Optional) Read only

current-utc-offset-valid

(Optional) current_utc_offset_valid

current-utc-offset

(Optional) current_utc_offset

leap-59

(Optional) leap-59

leap-61

(Optional) leap-61

time-traceable

(Optional) time-traceable

freq-traceable

(Optional) freq-traceable

ptp-timescale

(Optional) ptp-timescale

time-source

(Optional) time-source

Command Mode

- /exec

Chapter 17. Q Show Commands

- show qos dcbxp incompatibility interface

- show qos dcbxp info

- show qos dcbxp interface

- show qos shared-policer

- show queuing

- show queuing burst-detect

- show queuing pfc-queue

- show queuing pfc-queue interface snmp watchdogIfQueueTable ifIndex

- show queuing pfc-queue snmp ifIndex

- show queuing tabular

- show queuing tah-pfc-queue

show qos dcbxp incompatibility interface

show qos dcbxp incompatibility interface <iface-num> [ __readonly__ { <pfc> <mtu> <lpg> <rpg> <bw> <lfcoe> <rfcoe> <liscsi> <riscsi> } ]

Syntax Description

show

Show running system information

dcbxp

DCBXP

incompatibility

incompatibility information

interface

incompatibility info for interface

iface-num

Interface

__readonly__

(Optional)

pfc

(Optional) pfc

mtu

(Optional) MTU Value

lpg

(Optional) Local Priority Grouping

rpg

(Optional) Remote Priority Grouping

bw

(Optional) CIN: bandwidth/priority

lfcoe

(Optional) local fcoe

rfcoe

(Optional) remote fcoe

liscsi

(Optional) local iscsi

riscsi

(Optional) remote iscsi

Command Mode

- /exec

show qos dcbxp info

show qos dcbxp info [ __readonly__ { TABLE_dcbxp <intf> <pfcr> <pfcc> <pgr> <pgc> <mtur> <mtuc> <fcoer> <fcoec> <iscsir> <iscsic> } ]

Syntax Description

show

Show running system information

dcbxp

DCBXP

info

information

__readonly__

(Optional)

TABLE_dcbxp

(Optional) dxcbxp info

intf

(Optional) Interface

pfcr

(Optional) pfc recvd

pfcc

(Optional) pfc compatible

pgr

(Optional) pg received

pgc

(Optional) pg compatible

mtur

(Optional) mtu received

mtuc

(Optional) mtu compatible

fcoer

(Optional) fcoe received

fcoec

(Optional) fcoe compatible

iscsir

(Optional) iscsi received

iscsic

(Optional) iscsi compatible

Command Mode

- /exec

show qos dcbxp interface

show qos dcbxp interface [ <iface> ] [ __readonly__ [ <intf> { <info_absent> | { [ <local_pfc_cap> <local_pfc_enable_list> ] [ <peers_pfc_cap> <peers_pfc_enable_list> ] [ <local_ets_maxtc> <local_ets_priority_list> <local_ets_bandwidth_list> <local_ets_tsa_list> ] [ <peers_ets_maxtc> <peers_ets_priority_list> <peers_ets_bandwidth_list> <peers_ets_tsa_list> ] [ <local_app_pri> <local_app_type> <local_app_num> ] + [ <peers_app_pri> <peers_app_type> <peers_app_num> ] + [ <local_map_pri> <local_map_dscp> ] + [ <peers_map_pri> <peers_map_dscp> ] + } } ] + ]

Syntax Description

show

Show running system information

qos

QoS

dcbxp

DCBXP

interface

Per-interface information

iface

(Optional) Interface

__readonly__

(Optional)

intf

(Optional) Interface

info_absent

(Optional) No information is present for this Interface.

local_pfc_cap

(Optional) Number of Local Flows

local_pfc_enable_list

(Optional) List of Local Flows Enabled

peers_pfc_cap

(Optional) Number of Peer Flows

peers_pfc_enable_list

(Optional) List of Peer Flows Enabled

local_ets_maxtc

(Optional) Local ETS Maximum Traffic Classes

local_ets_priority_list

(Optional) Local ETS Priority List

local_ets_bandwidth_list

(Optional) Local ETS Bandwidth List

local_ets_tsa_list

(Optional) Local ETS TSA List

peers_ets_maxtc

(Optional) Peer ETS Maximum Traffic Classes

peers_ets_priority_list

(Optional) Peer ETS Priority List

peers_ets_bandwidth_list

(Optional) Peer ETS Bandwidth List

peers_ets_tsa_list

(Optional) Peer ETS TSA List

local_app_pri

(Optional) Local Application Priority

local_app_type

(Optional) Local Application Number Type

local_app_num

(Optional) Local Application Number

peers_app_pri

(Optional) Peer Application Priority

peers_app_type

(Optional) Peer Application Number Type

peers_app_num

(Optional) Peer Application Number

local_map_pri

(Optional) Local Map Priority

local_map_dscp

(Optional) Local Map DSCP Value

peers_map_pri

(Optional) Peer Map Priority

peers_map_dscp

(Optional) Peer Map DSCP Value

Command Mode

- /exec

show qos shared-policer

show qos shared-policer [ type qos1 ] [ <policer-name> ] [ __readonly__ { [ TABLE_policer <policer-name2> [ <cir-spec> ] [ <bc-spec> ] [ <be-spec> ] [ <cir-rate-units> ] [ <cir> ] [ <bc-size-units> ] [ <bc> ] [ <pir-rate-units> ] [ <pir> ] [ <be-size-units> ] [ <be> ] [ <cnf-col-cmap> ] [ <exc-col-cmap> ] [ TABLE_action <action-key> [ <cnf-act> ] [ <exc-act> ] [ <vio-act> ] [ <set-type> ] [ <enum-spec> ] [ <set-val> ] [ <tmap-from> ] [ <tmap-to> ] [ <tmap-name> ] ] ] } ]

Syntax Description

show

Show running system information

shared-policer

Shared policer

type

(Optional) Type of shared policer

qos1

(Optional) type qos

policer-name

(Optional) Shared policer name

__readonly__

(Optional)

TABLE_policer

(Optional) all police xml sessions

policer-name2

(Optional) Policer Name

TABLE_action

(Optional) all police actions xml sessions

action-key

(Optional) Count

cir-spec

(Optional) Is CIR keyword specified

bc-spec

(Optional) Is Committed Burst keyword specified

be-spec

(Optional) Is Extended Burst keyword specified

cir-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps

pir-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps

bc-size-units

(Optional) Units of size - pkts/bytes/kbytes/mbytes/ms/us/perc

be-size-units

(Optional) Units of size - pkts/bytes/kbytes/mbytes/ms/us/perc

tmap-from

(Optional)

tmap-to

(Optional)

tmap-name

(Optional) Table map name

cnf-col-cmap

(Optional) Conforming color class-map name

exc-col-cmap

(Optional) Exceeding color class-map name

enum-spec

(Optional) Is DSCP or PREC enum value specified

cnf-act

(Optional) Conform action (Police)

exc-act

(Optional) Exceed action (Police)

vio-act

(Optional) Violate action (Police)

set-type

(Optional) Type of set in police action

set-val

(Optional) Value of set type in police action

Command Mode

- /exec

show queuing

show queuing [ interface [ <if_list> ] ] [ summary ] [ module <module> ] [ __readonly__ [ TABLE_interface_mtu <intf_name> <mtu_val> ] [ TABLE_queuing_interface <dir> <if_name_str> [ TABLE_qosgrp_cfg <qosgrp> [ <bandwidth> ] [ <priority> ] [ <shape-min> ] [ <shape-max> ] [ <shape-units> ] [ <buffer-size> ] [ <pause-threshold> ] [ <resume-threshold> ] [ <q-limit> ] [ <q-limit-type> ] ] [ <mc-drop-pkt> ] [ TABLE_qosgrp_egress_stats <eq-qosgrp> [ TABLE_qosgrp_egress_stats_entry <eq-stat-type> <eq-stat-units> <eq-uc-stat-value> [ <eq-oobfc-uc-stat-value> ] [ <eq-mc-stat-value> ] ] ] [ TABLE_egress_stats_entry <ep-stat-type> <ep-stat-units> <ep-stat-value> ] [ TABLE_ingress_stats_entry <ip-stat-type> <ip-stat-units> <ip-stat-value> ] [ <tx-ppp> <rx-ppp> [ TABLE_pfc_stats <cos> [ <pfc-qosgrp> ] [ <pfc-pg> ] <tx-pause-state> <tx-pause-count> <rx-pause-state> <rx-pause-count> ] ] ] ]

Syntax Description

show

commands to display

queuing

Queuing related information

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

summary

(Optional) summary

__readonly__

(Optional)

TABLE_interface_mtu

(Optional) mtu values of each interface

intf_name

(Optional) interface name

mtu_val

(Optional) mtu val of interface

TABLE_queuing_interface

(Optional) Queuing information of an interface

dir

(Optional) Direction

if_name_str

(Optional) interface name

TABLE_qosgrp_cfg

(Optional) Qos-group configuration

qosgrp

(Optional) Qos-group value

bandwidth

(Optional) WRR bandwidth

priority

(Optional) Priority level

shape-units

(Optional) Shape units

q-limit

(Optional) Queue limit

q-limit-type

(Optional) Queue limit type (S-Static, D-Dynamic, U-Unlimited)

TABLE_qosgrp_egress_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

TABLE_qosgrp_egress_stats_entry

(Optional) Qos-group egress statistics entry

eq-stat-type

(Optional) Qos-group egress statistics type

eq-stat-units

(Optional) Qos-group egress statistics units

TABLE_egress_stats_entry

(Optional) Egress port statistics

ep-stat-type

(Optional) Egress port statistics type

ep-stat-units

(Optional) Egress port statistics units

TABLE_ingress_stats_entry

(Optional) Ingress port statistics

ip-stat-type

(Optional) Ingress port statistics type

ip-stat-units

(Optional) Ingress port statistics units

TABLE_pfc_stats

(Optional) Per COS PFC statistics

cos

(Optional) PFC COS

pfc-qosgrp

(Optional) Qos-group of the given COS

pfc-pg

(Optional) PG of the given COS/Qos-group

tx-pause-state

(Optional) Tx PFC state of the given COS

rx-pause-state

(Optional) Rx PFC state of the given COS

Command Mode

- /exec

show queuing burst-detect

show queuing burst-detect [ interface <if_name> [ queue <queue_num> ] ] [ module <module> ] [ detail ] [ __readonly__ [ TABLE_instance [ <if-str> ] [ <queue> ] [ <pipe> ] [ <threshold> ] [ <start-time> ] [ <peak> ] [ <peak-time> ] [ <end-depth> ] [ <end-time> ] [ <duration> ] ] ]

Syntax Description

show

commands to display

queuing

Queuing related information

burst-detect

Out of Band micro-burst queue statistics

interface

(Optional) Interface

if_name

(Optional) interface name

queue

(Optional) Queue number for displaying statistics

queue_num

(Optional) Queue number

module

(Optional) Slot/module

module

(Optional) Slot/module number

detail

(Optional) detailed statistics

if-str

(Optional) Interface name

__readonly__

(Optional) Read Only

TABLE_instance

(Optional) Instance

queue

(Optional) Queue Number

pipe

(Optional) XPE-A or XPE-B

threshold

(Optional) Threshold value in bytes

start-time

(Optional) Start time of burst

peak

(Optional) Peak depth in bytes

peak-time

(Optional) Peak time of burst

end-depth

(Optional) End depth in bytes

end-time

(Optional) End time of burst

duration

(Optional) Duration of burst

Command Mode

- /exec

show queuing pfc-queue

show queuing pfc-queue [ interface <if_list> ] [ module <module> ] [ detail ] [ __readonly__ <glb-wd-status> <glb-wd-timer> <glb-wd-timer-thresh> <glb-auto-restore> <glb-fixed-restore> <glb-int-intf-multi> <disable-action> <intf-multi> [ TABLE_queuing_interface <if_name_str> [ TABLE_qosgrp_stats <eq-qosgrp> [ TABLE_qosgrp_stats_entry <q-stat-type> <q-shutdown> <q-restored> <q-pkt-drained> <q-pkt-dropped> <q-pkt-drained-n-dropped> <q-aggr-pkt-dropped> <q-ing-pkt-dropped> <q-ing-aggr-pkt-dropped> ] ] [ TABLE_qosgrp_stats_summary <qosgrp-summary> ] ] ]

Syntax Description

show

commands to display

queuing

Queuing related information

pfc-queue

PFC Queuing related information

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

detail

(Optional) Show detailed PFC Queuing WD information

__readonly__

(Optional)

glb-wd-status

(Optional) Global watch-dog timer status

glb-wd-timer

(Optional) Global watch-dog timer value in msec

glb-wd-timer-thresh

(Optional) Global watch-dog timer thresh value in ms

glb-auto-restore

(Optional) Global auto restore multiplier value

glb-fixed-restore

(Optional) Global fixed restore multiplier value

glb-int-intf-multi

(Optional) Global internal interface multiplier value

disable-action

(Optional) Only generate syslog for queue stuck, no action

intf-multi

(Optional) Interface mulitplier value

if_name_str

(Optional) interface name

TABLE_queuing_interface

(Optional) Queuing information of an interface

TABLE_qosgrp_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

TABLE_qosgrp_stats_entry

(Optional) Qos-group egress statistics entry

q-stat-type

(Optional) Queue stat

TABLE_qosgrp_stats_summary

(Optional) Qos-group egress statistics summary

qosgrp-summary

(Optional) Qos-group summary value

Command Mode

- /exec

show queuing pfc-queue interface snmp watchdogIfQueueTable ifIndex

show queuing pfc-queue interface snmp watchdogIfQueueTable ifIndex <ifindex> [ __readonly__ [ TABLE_watchdogIfQueueTable <ifindex> [ TABLE_qosgrp_stats <eq-qosgrp> <state> <shutdowns> <restores> <dropPkts> <totaldropPkts> <ingDropPkts> <totalIngDropPkts> ] ] ]

Syntax Description

show

commands to display

queuing

Queuing related information

pfc-queue

PFC Queuing related information

interface

Interface for displaying queuing config

snmp

commands for snmp

watchdogIfQueueTable

Table

ifIndex

port ifIndex

ifindex

interfaces ifIndex

__readonly__

(Optional)

TABLE_watchdogIfQueueTable

(Optional) PFC Queuing information of an interface

ifindex

(Optional) interface ifindex

TABLE_qosgrp_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

state

(Optional) Queue state

shutdowns

(Optional) Number of times queue is shutdown

restores

(Optional) Number of times queue is restored

dropPkts

(Optional) Total Number of packets drained + dropped since last shutdown

totaldropPkts

(Optional) Number of aggregate packets dropped during shutdowns

ingDropPkts

(Optional) Total Number of packets dropped in the ingress direction since last shutdown

totalIngDropPkts

(Optional) Number of aggregate packets dropped in the ingress direction during shutdowns

Command Mode

- /exec

show queuing pfc-queue snmp ifIndex

show queuing pfc-queue snmp ifIndex <ifidx> [ __readonly__ TABLE-cpfcWatchdogIfQueueInfoTable <ifidx_out> <queueno_out> <q-state> <q-shutdown> <q-restored> <q-pkt-dropped> <q-aggr-pkt-dropped> <q-ing-pkt-dropped> <q-ing-aggr-pkt-dropped> ]

Syntax Description

show

Show running system information

queuing

Queuing related information

pfc-queue

PFC Queuing related information

snmp

Snmp information

ifIndex

Interface index

ifidx

Index

__readonly__

(Optional) Read Only

TABLE-cpfcWatchdogIfQueueInfoTable

(Optional) SNMP table

ifidx_out

(Optional) Interface index out

queueno_out

(Optional) Queue number out

q-state

(Optional) Queue state

q-shutdown

(Optional) Number of times queue is shutdown

q-restored

(Optional) Number of times queue is restored

q-pkt-dropped

(Optional) Number of packets dropped since last shutdown

q-aggr-pkt-dropped

(Optional) Number of aggregate packets dropped

q-ing-pkt-dropped

(Optional) Number of Ingress packets dropped

q-ing-aggr-pkt-dropped

(Optional) Number of aggregate Ingress packets dropped

Command Mode

- /exec

show queuing tabular

show queuing tabular [ non-zero [ drop-only ] ] [ interface <if_list> ] [ module <module> ] [ __readonly__ [ TABLE_queuing_interface <if_name_str> <qos_group_name_0> <qos_group_name_1> <qos_group_name_2> <qos_group_name_3> <qos_group_name_4> <qos_group_name_5> <qos_group_name_6> <qos_group_name_7> <qos_group_name_cpu> <qos_group_name_span> <tx_uc_pkt_qos_0> <tx_uc_byte_qos_0> <tx_uc_drop_pkt_qos_0> <tx_uc_drop_byte_qos_0> <tx_uc_ecn_pkt_qos_0> <tx_uc_ecn_byte_qos_0> <tx_oobfc_uc_pkt_qos_0> <tx_oobfc_uc_byte_qos_0> <tx_oobfc_uc_drop_pkt_qos_0> <tx_oobfc_uc_drop_byte_qos_0> <tx_fld_pkt_qos_0> <tx_fld_byte_qos_0> <tx_fld_drop_pkt_qos_0> <tx_fld_drop_byte_qos_0> <tx_mc_pkt_qos_0> <tx_mc_byte_qos_0> <tx_mc_drop_pkt_qos_0> <tx_mc_drop_byte_qos_0> <pfc_rx_qos_0> <pfc_tx_qos_0> <qos_grp_1> <qos_grp_2> <qos_grp_3> <qos_grp_4> <qos_grp_5> <qos_grp_6> <qos_grp_7> <qos_grp_cpu> <qos_grp_span> <ing_drop_pkt> ] ]

Syntax Description

show

commands to display

queuing

Queuing related information

tabular

QoS stats in tabular form

non-zero

(Optional) Interface for non-zero stats

drop-only

(Optional) Interface for non-zero drop-only stats

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional)

if_name_str

(Optional) interface name

TABLE_queuing_interface

(Optional) Queuing information of an interface

qos_group_name_0

(Optional) QoS Group name

qos_group_name_1

(Optional) QoS Group name

qos_group_name_2

(Optional) QoS Group name

qos_group_name_3

(Optional) QoS Group name

qos_group_name_4

(Optional) QoS Group name

qos_group_name_5

(Optional) QoS Group name

qos_group_name_6

(Optional) QoS Group name

qos_group_name_7

(Optional) QoS Group name

qos_group_name_cpu

(Optional) QoS Group name

qos_group_name_span

(Optional) QoS Group name

Command Mode

- /exec

show queuing tah-pfc-queue

show queuing tah-pfc-queue [ interface <if_list> ] [ module <module> ] [ detail ] [ __readonly__ [ TABLE_queuing_interface <if_name_str> [ TABLE_qosgrp_stats <eq-qosgrp> [ TABLE_qosgrp_stats_entry <q-stat-type> <q-shutdown> <q-restored> <q-pkt-drained> <q-pkt-dropped> <q-total-pkt-dropped> <q-aggr-pkt-dropped> <q-ingr-pkt-dropped> <q-aggr-ingr-pkt-dropped> ] ] [ TABLE_qosgrp_stats_summary <qosgrp-summary> ] ] ]

Syntax Description

show

commands to display

queuing

Queuing related information

tah-pfc-queue

PFC Queuing related information

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

detail

(Optional) Show detailed PFC Queuing WD information

__readonly__

(Optional)

if_name_str

(Optional) interface name

TABLE_queuing_interface

(Optional) Queuing information of an interface

TABLE_qosgrp_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

TABLE_qosgrp_stats_entry

(Optional) Qos-group egress statistics entry

q-stat-type

(Optional) Queue stat

TABLE_qosgrp_stats_summary

(Optional) Qos-group egress statistics summary

qosgrp-summary

(Optional) Qos-group summary value

Command Mode

- /exec

Chapter 18. R Show Commands

- show radius-cfs

- show radius-server

- show radius-server

- show radius-server directed-request

- show radius-server groups

- show radius-server sorted

- show radius-server statistics

- show radius status

- show redundancy status

- show regexp

- show reload

- show resource

- show rmon

- show role

- show role feature-group

- show role feature

- show rollback log exec

- show rollback status

- show route-map

- show route-map pbr-statistics

- show router-guard

- show routing-context

- show routing-privilege

- show routing

- show routing clients

- show routing event-history

- show routing hash

- show routing hidden-nh

- show routing ipv6

- show routing ipv6 clients

- show routing ipv6 event-history

- show routing ipv6 hash

- show routing ipv6 hidden-nh

- show routing ipv6 memory estimate

- show routing ipv6 memory statistics

- show routing ipv6 multicast

- show routing ipv6 multicast clients

- show routing ipv6 multicast event-history

- show routing ipv6 multicast memory estimate

- show routing ipv6 nexthop info

- show routing ipv6 nhlfe

- show routing ipv6 recursive-next-hop

- show routing memory estimate

- show routing memory statistics

- show routing multicast

- show routing multicast clients

- show routing multicast event-history

- show routing multicast mdt encapsulation

- show routing multicast memory estimate

- show routing multicast sr

- show routing nhlfe

- show routing recursive-next-hop

- show routing unresolved-next-hop

- show running-config

- show running-config aaa

- show running-config acllog

- show running-config aclmgr

- show running-config aclmgr active

- show running-config adjmgr

- show running-config all

- show running-config amt

- show running-config arp

- show running-config assoc

- show running-config backup

- show running-config bfd

- show running-config bgp

- show running-config bloggerd

- show running-config callhome

- show running-config catena

- show running-config cdp

- show running-config cert-enroll

- show running-config cfs

- show running-config clock_manager

- show running-config config-profile

- show running-config config-template

- show running-config controller

- show running-config copp

- show running-config dhcp

- show running-config diagnostic

- show running-config diff

- show running-config dot1x

- show running-config ecp

- show running-config eem

- show running-config eigrp

- show running-config eltm

- show running-config evb

- show running-config exclude

- show running-config exclude fabricpath

- show running-config expand-port-profile

- show running-config explicit

- show running-config fabric forwarding

- show running-config fabric multicast

- show running-config fcoe_mgr

- show running-config hardware-telemetry

- show running-config hsrp

- show running-config icam

- show running-config icmpv6

- show running-config igmp

- show running-config imp

- show running-config interface

- show running-config interface

- show running-config interface defaults

- show running-config interface explicit

- show running-config ip

- show running-config ipqos

- show running-config ipqos active

- show running-config ipv6

- show running-config isis

- show running-config l3vm

- show running-config ldap

- show running-config license

- show running-config lldp

- show running-config macsec

- show running-config mmode

- show running-config monitor

- show running-config mpls ldp

- show running-config mpls static

- show running-config mpls strip

- show running-config mpls traffic-eng

- show running-config msdp

- show running-config nat

- show running-config nbm

- show running-config netflow

- show running-config ngoam

- show running-config ntp

- show running-config nv overlay

- show running-config nxsdk

- show running-config openflow

- show running-config ospf

- show running-config ospfv3

- show running-config param-list

- show running-config pim

- show running-config pim6

- show running-config plb-services

- show running-config poe

- show running-config port-profile

- show running-config port-security

- show running-config ptp

- show running-config radius

- show running-config res_mgr

- show running-config rip

- show running-config routing ip multicast

- show running-config routing ipv6 multicast

- show running-config rpm

- show running-config section

- show running-config security

- show running-config segment-routing

- show running-config services

- show running-config services

- show running-config sflow

- show running-config sla responder

- show running-config sla sender

- show running-config sla twamp-server

- show running-config smart-channel

- show running-config snmp

- show running-config spanning-tree

- show running-config srte

- show running-config switch

- show running-config tacacs

- show running-config telemetry

- show running-config track

- show running-config udld

- show running-config vdc-all

- show running-config vdc

- show running-config virtual-service

- show running-config vlan

- show running-config vlan

- show running-config vlan

- show running-config vlan_mgr

- show running-config vmtracker

- show running-config vpc

- show running-config vrf

- show running-config vrf default

- show running-config vrrp

- show running-config vrrpv3

- show running-config vshd

- show running-config vtp

- show running-config wwnm

show radius-cfs

show radius-cfs [ __readonly__ [ <distr_status> ] [ <session_status> ] [ <session_db> ] [ <merge_status> ] ]

Syntax Description

show

Show running system information

radius-cfs

Show radius cfs state

__readonly__

(Optional)

distr_status

(Optional) radius distribution status

session_status

(Optional) current session status

session_db

(Optional) status of session db

merge_status

(Optional) radius merge status

Command Mode

- /exec

show radius-server

show radius-server { <host> } [ __readonly__ { <host1> } [ <authen_port> ] [ <account_port> ] [ <share_key> ] [ <timeout> ] [ <retries> ] [ <secure_radius> ] [ <aid> ] <idle_tim> <test_user_name> <test_pwd> ]

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

host

DNS name or IP address

__readonly__

(Optional)

host1

(Optional) DNS name or IP address

authen_port

(Optional) RADIUS server's port for authentication

account_port

(Optional) RADIUS server's port for accounting

timeout

(Optional) radius server timeout

retries

(Optional) radius server retry count

secure_radius

(Optional) secure radius enabled or not

aid

(Optional) Authority identity

share_key

(Optional) RADIUS shared secret

test_user_name

(Optional) User name in test packets

test_pwd

(Optional) User password in test packets

idle_tim

(Optional) Time interval for monitoring the server

Command Mode

- /exec

show radius-server

show radius-server [ __readonly__ [ <global_secretKey> ] { <global_timeout> <retransmissionCount> <global_deadtime> } [ <global_source_intf> ] [ <global_idle_time> ] { [ <global_testUsername> ] [ <global_testPassword> ] } { <server_count> } [ TABLE_server <server_ip> [ <auth_port> ] [ <acct_port> ] [ <secretKey> ] [ <timeout> ] [ <retries> ] ] [ { <host0> <auth_port> <acct_port> <shared_key> <idle_time><test_username> <test_password> } + ] ]

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

__readonly__

(Optional)

global_secretKey

(Optional) Global shared secret

global_timeout

(Optional) Global timeout for tacacs

retransmissionCount

(Optional) Retransmittion count when there is no server response

global_deadtime

(Optional) Global deadtime

global_source_intf

(Optional) Radius global source interface

global_idle_time

(Optional) Radius global idle-time for server monitoring

global_testUsername

(Optional) Username of global test parameters

global_testPassword

(Optional) Password of global test parameters

server_count

(Optional) Total number of radius servers configured

TABLE_server

(Optional)

server_ip

(Optional) Ip address of the server

auth_port

(Optional) Authentication port used for this server

acct_port

(Optional) Accounting Port used for this server

secretKey

(Optional) Shared secret between the server and the tacacs client

timeout

(Optional) Timeout for this tacacs server

retries

(Optional) Retry count for individual servers

host0

(Optional) DNS name or IP address

auth_port

(Optional) RADIUS server's port for authentication

acct_port

(Optional) RADIUS server's port for accounting

shared_key

(Optional) RADIUS shared secret

test_password

(Optional) User password in test packets

Command Mode

- /exec

show radius-server directed-request

show radius-server directed-request [ __readonly__ { <radius_directedRequest_status> } ]

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

directed-request

Show directed server enable configuration

__readonly__

(Optional)

radius_directedRequest_status

(Optional) status of radius-server directed request

Command Mode

- /exec

show radius-server groups

show radius-server groups [ <s0> ] [ __readonly__ [ <num_of_groups> ] TABLE_group <group_name> [ TABLE_server <server_ip> [ <auth_port> ] [ <acct_port> ] ] [ <dead_time> ] [ <vrf_name> ] [ <source_interface> ] ]

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

groups

Show RADIUS server group configuration information

s0

(Optional) RADIUS server group name

__readonly__

(Optional)

num_of_groups

(Optional) number of groups

TABLE_group

(Optional)

group_name

(Optional) name of the group

TABLE_server

(Optional)

server_ip

(Optional) DNS name or IP address

auth_port

(Optional) radius server authentication port

acct_port

(Optional) radius server accounting port

dead_time

(Optional) Time interval for which the server is marked as dead before sendinga test command

vrf_name

(Optional) name of the vrf

source_interface

(Optional) Interface Description

Command Mode

- /exec

show radius-server sorted

show radius-server sorted [ __readonly__ [ <global_secretKey> ] { <global_timeout> <retransmissionCount> <global_deadtime> } [ <global_source_intf> ] [ <global_idle_time> ] { [ <global_testUsername> ] [ <global_testPassword> ] } { <server_count> } [ TABLE_server <server_ip> [ <auth_port> ] [ <acct_port> ] [ <secretKey> ] [ <timeout> ] [ <retries> ] ] ]

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

sorted

Show RADIUS servers sorted by name

__readonly__

(Optional)

global_secretKey

(Optional) Global shared secret

global_timeout

(Optional) Global timeout for tacacs

retransmissionCount

(Optional) Retransmittion count when there is no server response

global_deadtime

(Optional) Global deadtime

global_source_intf

(Optional) Radius global source interface

global_idle_time

(Optional) Radius global idle-time for server monitoring

global_testUsername

(Optional) Username of global test parameters

global_testPassword

(Optional) Password of global test parameters

server_count

(Optional) Total number of radius servers configured

TABLE_server

(Optional)

server_ip

(Optional) Ip address of the server

auth_port

(Optional) Authentication port used for this server

acct_port

(Optional) Accounting Port used for this server

secretKey

(Optional) Shared secret between the server and the tacacs client

timeout

(Optional) Timeout for this tacacs server

retries

(Optional) Retry count for individual servers

Command Mode

- /exec

show radius-server statistics

show radius-server statistics <host0> [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } { acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> } } ]

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

statistics

Show RADIUS statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

show radius status

show radius status [ __readonly__ [ <distr_status> ] [ <session_status> ] [ <session_owner> ] [ <session_db> ] [ <last_operation> ] [ <last_operation_status> ] [ <fail_code> ] ]

Syntax Description

show

Show running system information

radius

Show RADIUS Information

status

Show RADIUS cfs distribution status

__readonly__

(Optional)

distr_status

(Optional) radius distribution status

session_status

(Optional) current session status

session_owner

(Optional) owner of the current distribution session

session_db

(Optional) status of session db

last_operation

(Optional) last_operation

last_operation_status

(Optional) status of the last operation

fail_code

(Optional) reason for the failure of last operation

Command Mode

- /exec

show redundancy status

show redundancy status [ __readonly__ <rmode_admin> <rmode_opr> <this_sup> <this_sup_rd_st> <this_sup_sup_st> <this_sup_int_st> <oth_sup> <oth_sup_rd_st> <oth_sup_sup_st> <oth_sup_int_st> <sys_strt_time> <sys_uptm_days> <sys_uptm_hrs> <sys_uptm_mins> <sys_uptm_secs> <kern_uptm_days> <kern_uptm_hrs> <kern_uptm_mins> <kern_uptm_secs> <asup_uptm_days> <asup_uptm_hrs> <asup_uptm_mins> <asup_uptm_secs> ]

Syntax Description

show

redundancy

Show system redundancy status

status

Current redundancy status

__readonly__

(Optional)

rmode_admin

(Optional)

rmode_opr

(Optional)

this_sup

(Optional)

this_sup_rd_st

(Optional)

this_sup_sup_st

(Optional)

this_sup_int_st

(Optional)

oth_sup

(Optional)

oth_sup_rd_st

(Optional)

oth_sup_sup_st

(Optional)

oth_sup_int_st

(Optional)

sys_strt_time

(Optional)

sys_uptm_days

(Optional)

sys_uptm_hrs

(Optional)

sys_uptm_mins

(Optional)

sys_uptm_secs

(Optional)

kern_uptm_days

(Optional)

kern_uptm_hrs

(Optional)

kern_uptm_mins

(Optional)

kern_uptm_secs

(Optional)

asup_uptm_days

(Optional)

asup_uptm_hrs

(Optional)

asup_uptm_mins

(Optional)

asup_uptm_secs

(Optional)

Command Mode

- /exec

show regexp

show { ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 { unicast | multicast } ] } regexp <regexp-str> [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

Display BGP information for all address families

regexp

Display routes matching the AS path regular expression

regexp-str

Regular expression to match the AS paths

Command Mode

- /exec

show reload

show reload [ __readonly__ <reload-schedule> ]

Syntax Description

show

Show running system information

reload

Display information about scheduled reload

__readonly__

(Optional)

reload-schedule

(Optional) Reload scheduling info

Command Mode

- /exec

show resource

show resource [ <res-mgr-res-known-name> ] [ hidden-too | with-flags ] [ __readonly__ { TABLE_vdc_resource_local <res_name> <min> <max> <used> <unused> <free> } ]

Syntax Description

show

Show running system information

resource

Show resource configuration for VDC

res-mgr-res-known-name

(Optional) Resource name

hidden-too

(Optional) Also show hidden resources

with-flags

(Optional) Also show resource flags

__readonly__

(Optional) Read Only

TABLE_vdc_resource_local

(Optional)

res_name

(Optional) Resource Name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

used

(Optional) Resource current usage for this VDC

unused

(Optional) Resource reserved for this VDC but currently not used

free

(Optional) Resource current free for this VDC

Command Mode

- /exec

show rmon

show rmon { alarms | events | hcalarms | info | logs } [ __readonly__ [ TABLE_rmon_alarm { <alaram-str> <ascii-buf-str> <samp-type-str> <ris-trshod-str> <fall-trshod-str> <start-enable-str> } ] [ TABLE_rmon_event { <ev-alaram-str> <ev-desc-str> <ev-fir-cause> <last-fired> } ] [ TABLE_rmon_hcala { <hc-alaram-str> <hc-ascii-buf-str> <hc-sam-ty-str> <hc-ris-thresh-str> <hc-fal-thresh-str> <start-alrm-str> <fail-attem-str> } ] [ TABLE_rmon_info { <max-32-64-ala-str> <max-conf-32-ala-str> <max-conf-64-ala-str> } ] [ TABLE_rmon_log { <event-id-str> <rmon-pch> [ <log-buff-str> ] <log-oid> } ] ]

Syntax Description

show

Show running system information

rmon

Display RMON statistics

alarms

Display the RMON alarm table

events

Display the RMON event table

hcalarms

Display the RMON HC(High Capacity) Alarm table

info

Display the RMON info

logs

Display the RMON event log table

__readonly__

(Optional)

TABLE_rmon_alarm

(Optional)

alaram-str

(Optional)

ascii-buf-str

(Optional)

samp-type-str

(Optional)

ris-trshod-str

(Optional)

fall-trshod-str

(Optional)

start-enable-str

(Optional)

TABLE_rmon_event

(Optional)

ev-alaram-str

(Optional)

ev-desc-str

(Optional)

ev-fir-cause

(Optional)

last-fired

(Optional)

TABLE_rmon_hcala

(Optional)

hc-alaram-str

(Optional)

hc-ascii-buf-str

(Optional)

hc-sam-ty-str

(Optional)

hc-ris-thresh-str

(Optional)

hc-fal-thresh-str

(Optional)

start-alrm-str

(Optional)

fail-attem-str

(Optional)

TABLE_rmon_info

(Optional)

max-32-64-ala-str

(Optional)

max-conf-32-ala-str

(Optional)

max-conf-64-ala-str

(Optional)

TABLE_rmon_log

(Optional)

event-id-str

(Optional)

rmon-pch

(Optional)

log-buff-str

(Optional)

log-oid

(Optional)

Command Mode

- /exec

show role

show role [ name <arg3> ] [ __readonly__ { TABLE_role <role_name> <role_description> [ <attribute_scope> ] [ <permit_vsan> ] [ <permit_vlan> ] [ <permit_vlan_id> ] [ <permit_interface> ] [ <permit_interface_slot> ] [ <permit_vrf> ] [ TABLE_vrf<permit_vrf_name> ] [ { TABLE_rule <rule_num> <rule_action> { <rule_permission> | <rule_permission_mds> } [ <rule_featuretype> ] [ <rule_entity> ] } ] } ]

Syntax Description

show

Show running system information

role

Show role configuration

name

(Optional) Enter the role name

arg3

(Optional) Enter the role name

__readonly__

(Optional)

TABLE_role

(Optional)

role_name

(Optional)

role_description

(Optional)

attribute_scope

(Optional)

permit_vsan

(Optional)

permit_vlan

(Optional)

permit_vlan_id

(Optional)

permit_interface

(Optional)

permit_interface_slot

(Optional)

permit_vrf

(Optional)

TABLE_rule

(Optional)

rule_num

(Optional)

rule_action

(Optional)

rule_permission

(Optional)

rule_permission_mds

(Optional)

rule_featuretype

(Optional)

rule_entity

(Optional)

Command Mode

- /exec

show role feature-group

show role feature-group [ name <arg4> ] [ detail ] [ __readonly__ TABLE_role_feature_group <feature_group_name> TABLE_role_feature <feature_name> [ TABLE_role_feature_rule <feature_rule> ] ]

Syntax Description

show

Show running system information

role

Show role configuration

feature-group

Role feature group

name

(Optional) Enter the feature-group name

arg4

(Optional) Feature-group name

detail

(Optional) Detailed information including feature rules

__readonly__

(Optional)

TABLE_role_feature_group

(Optional)

feature_group_name

(Optional)

TABLE_role_feature

(Optional)

feature_name

(Optional)

TABLE_role_feature_rule

(Optional)

feature_rule

(Optional)

Command Mode

- /exec

show role feature

show role feature [ name <arg5> | detail ] [ __readonly__ TABLE_role_feature <feature_name> [ TABLE_role_feature_rule <feature_rule> ] ]

Syntax Description

show

Show running system information

role

Show role configuration

feature

Role feature

name

(Optional) Enter the feature name

arg5

(Optional) Feature name

detail

(Optional) Detailed information including feature rules

__readonly__

(Optional)

TABLE_role_feature

(Optional)

feature_name

(Optional)

TABLE_role_feature_rule

(Optional)

feature_rule

(Optional)

Command Mode

- /exec

show rollback log exec

show rollback log { exec | verify } [ __readonly__ [ <log_entry> + ] ]

Syntax Description

show

Show running system information

rollback

Show rollback

log

show rollback log

exec

show rollback execution log

verify

show rollback verify log

__readonly__

(Optional) Read only

log_entry

(Optional) log entry from rollback log

Command Mode

- /exec

show rollback status

show rollback status [ __readonly__ <last_operation> [ <rollback_type> ] [ <name> ] [ <start_time> ] [ <end_time> ] [ <operation_status> ] ]

Syntax Description

show

Show running system information

rollback

show rollback

status

show status of last rollback operation

__readonly__

(Optional) Read only

last_operation

(Optional) last operation

rollback_type

(Optional) rollback type

name

(Optional) name

start_time

(Optional) start time

end_time

(Optional) end time

operation_status

(Optional) operation status

Command Mode

- /exec

show route-map

show route-map [ <route-map-name> | <route-map-cfg-name> ] [ __readonly__ TABLE_rmap <name> <action> <seq> [ <descript> ] [ <continue> ] [ { TABLE_rmap_match <match_type> <match_stmt> } ] [ { TABLE_rmap_set <set_type> <set_stmt> } ] ]

Syntax Description

show

Show running system information

route-map

Route-map information

route-map-name

(Optional) Route-map name

route-map-cfg-name

(Optional) Known route-map name

__readonly__

(Optional)

TABLE_rmap

(Optional)

TABLE_rmap_match

(Optional)

TABLE_rmap_set

(Optional)

name

(Optional)

action

(Optional)

seq

(Optional)

descript

(Optional)

continue

(Optional)

match_type

(Optional)

match_stmt

(Optional)

set_type

(Optional)

set_stmt

(Optional)

Command Mode

- /exec

show route-map pbr-statistics

show route-map { <pbr_rmap_name> | <pbr_rmap_cfg_name> } pbr-statistics [ __readonly__ <tag> <action> <seq> <pbr_pkt_count> <dflt_rtg_pkt_count> ]

Syntax Description

show

Show running system information

route-map

Route-map information

pbr_rmap_name

Route-map name

pbr_rmap_cfg_name

Known route-map name

pbr-statistics

PBR statistics

__readonly__

(Optional)

tag

(Optional)

action

(Optional)

seq

(Optional)

pbr_pkt_count

(Optional)

dflt_rtg_pkt_count

(Optional)

Command Mode

- /exec

show router-guard

show router-guard [ vlan <vlan_id> ] [ __readonly__ [ TABLE_vlanid { <vlanid> <globally-enabled-switch-port> } [ TABLE_if [ <disabled-if> ] ] ] ]

Syntax Description

show

Show running system information

router-guard

Shows router guard config details for all interfaces

vlan

(Optional) Only for the specified VLAN

vlan_id

(Optional) VLAN ID

__readonly__

(Optional)

TABLE_vlanid

(Optional)

vlanid

(Optional)

globally-enabled-switch-port

(Optional)

TABLE_if

(Optional)

disabled-if

(Optional)

Command Mode

- /exec

show routing-context

show routing-context [ __readonly__ <routing-con> ]

Syntax Description

show

Show running system information

routing-context

Display the current routing context

__readonly__

(Optional)

routing-con

(Optional)

Command Mode

- /exec

show routing-privilege

show routing-privilege

Syntax Description

show

Show running system information

routing-privilege

Display the current privilege level

Command Mode

- /exec

show routing

show routing [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ip-addr> | { <ip-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <protocol> [ all ] } | { bind-label <bind-lbl> | next-hop <next-hop> | next-hop-v6 <next-hop-v6> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | detail ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ipnexthop> ] [ <ifname> ] [ <bindlbl> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] [ <ubest> ] [ <mbest> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientnameuni> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientnamemulti> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

l3vm-info

(Optional) Display corresponding L3VM information

rpf

(Optional) Display RPF information for multicast source

ip-addr

(Optional) Display single route longest match lookup

ip-prefix

(Optional) Display single exact match route

longer-prefixes

(Optional) Display matching routes with mask-lengths >= prefix

shorter-prefixes

(Optional) Display matching routes with mask-lengths <= prefix

protocol

(Optional) Display routes for protocol (or route type)

all

(Optional) Display routes for protocol for backup next-hops too

bind-label

(Optional) Display routes with this bind-label only

bind-lbl

(Optional) Binding label

next-hop

(Optional) Display routes with this next-hop only

next-hop

(Optional) Next hop address

next-hop-v6

(Optional) Display routes with this V6 next-hop only

interface

(Optional) Display routes with this output interface only

interface

(Optional) Interface Name

updated

(Optional) Display routes filtered by last updated time

since

(Optional) Display those routes updated since this time

stime

(Optional) Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

until

(Optional) Display those routes updated until this time

utime

(Optional) Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

summary

(Optional) Display route counts

detail

(Optional) Display routes in full detail

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ipnexthop

(Optional)

ifname

(Optional)

bindlbl

(Optional)

uptime

(Optional)

pref

(Optional)

metric

(Optional)

clientname

(Optional)

type

(Optional)

tag

(Optional)

stale

(Optional)

unres

(Optional)

hidden

(Optional)

stale-label

(Optional)

ubest

(Optional)

mbest

(Optional)

TABLE_summary

(Optional)

routes

(Optional)

paths

(Optional)

multicast_paths

(Optional)

TABLE_unicast

(Optional)

clientnameuni

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_multicast

(Optional)

clientnamemulti

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_route_count

(Optional)

mask_len

(Optional)

count

(Optional)

Command Mode

- /exec

show routing clients

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] clients [ <client> | <protocol> ] [ __readonly__ { TABLE_client <client_name> <pib_index> <epid> [ <mts_sap> ] [ <mts_sap_str> ] <mru_cache_hits> <mru_cache_misses> <pib_stale_time> <pss_created> [ <bad_l3vm_table_refcount> ] [ <pib_stale_timer> ] [ { TABLE_nib_node <uribtibtype_contextname> [ <all_igp> ] [ <self> ] [ <all> ] [ <unib_notify_mask> ] <routes> <rnhs> <labels> [ <convg_req_mask> ] [ <convg_send_mask> ] [ <utib_state> ] [ <pending_timer> ] [ <urib_state_invalid> ] } ] [ { TABLE_msgs_rcvd <urib_mtype_str> <upib_rcvd> } ] [ { TABLE_msgs_sent <urib_mtype_str> <upib_sent> } ] } ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

clients

Display urib client information

client

(Optional) Display single urib client information

protocol

(Optional) Display single urib client information

__readonly__

(Optional)

TABLE_client

(Optional)

client_name

(Optional)

pib_index

(Optional)

epid

(Optional)

mts_sap

(Optional)

mts_sap_str

(Optional)

mru_cache_hits

(Optional)

mru_cache_misses

(Optional)

pib_stale_time

(Optional)

pss_created

(Optional)

bad_l3vm_table_refcount

(Optional)

pib_stale_timer

(Optional)

TABLE_nib_node

(Optional)

uribtibtype_contextname

(Optional)

all_igp

(Optional)

self

(Optional)

all

(Optional)

unib_notify_mask

(Optional)

routes

(Optional)

rnhs

(Optional)

labels

(Optional)

convg_req_mask

(Optional)

convg_send_mask

(Optional)

utib_state

(Optional)

pending_timer

(Optional)

urib_state_invalid

(Optional)

TABLE_msgs_rcvd

(Optional)

urib_mtype_str

(Optional)

upib_rcvd

(Optional)

TABLE_msgs_sent

(Optional)

urib_mtype_str

(Optional)

upib_sent

(Optional)

Command Mode

- /exec

show routing event-history

show routing [ ip | ipv4 ] [ unicast ] [ internal ] event-history { statistics | msgs | { { add-route | cli | delete-route | detail | dme | errors | general | ha | loop-detection | modify-route | notifications | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary } [ filter [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ client { <client> | <protocol> } ] [ prefix-list <pfxlist-name> ] ] } }

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

internal

(Optional) Commands for internal use

event-history

Show routing event log

statistics

Show routing event log Statistics

msgs

Show routing message event log

add-route

Add route

cli

CLI

delete-route

Delete route

detail

Detail

dme

DME

errors

Errors

general

General

ha

HA

loop-detection

Loop detection

modify-route

Modify route

notifications

Notification

recursive-next-hop

Recursive next hop

summary

Summary

ufdm

UFDM

ufdm-detail

UFDM Detail

ufdm-summary

UFDM Summary

filter

(Optional) Filter event log

vrf

(Optional) Filter VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Filter for all VRFs

client

(Optional) Filter by client

client

(Optional) Filter by single urib client

protocol

(Optional) Filter by single urib client

prefix-list

(Optional) Filter by IPv4 prefix-list

pfxlist-name

(Optional) IPv4 prefix list name

Command Mode

- /exec

show routing hash

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] hash <source> <dest> [ ip-proto <ip-proto> ] [ <src-port> <dest-port> ] [ in-interface <in-interface> ] [ module <module-id> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> TABLE_hashpath <mcast> <hashpath> <hash-val> TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path <ubest> <mbest> <ipnexthop> <ifname> <pref> <metric> <uptime> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

hash

Display load-balancing hash information

source

Source IPv4 address of unicast flow or group address for multicast flow

dest

Destination IPv4 address of unicast flow or source address for multicast flow

src-port

(Optional) Source-port

dest-port

(Optional) Destination-port

in-interface

(Optional) Incoming Interface for Packet.Option valid on Tomahawk platform only

in-interface

(Optional) Interface Name

ip-proto

(Optional) IP Protocol information for the packet

ip-proto

(Optional) IP Protocol information for the packet

module

(Optional) Module

module-id

(Optional) Module

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_hashpath

(Optional)

mcast

(Optional)

hashpath

(Optional)

hash-val

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ubest

(Optional)

mbest

(Optional)

ipnexthop

(Optional)

ifname

(Optional)

pref

(Optional)

metric

(Optional)

uptime

(Optional)

clientname

(Optional)

type

(Optional)

tag

(Optional)

stale

(Optional)

unres

(Optional)

hidden

(Optional)

stale-label

(Optional)

Command Mode

- /exec

show routing hidden-nh

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] hidden-nh [ __readonly__ <uribtibtype_contextname> [ <utibtibtype_topologyname> ] { TABLE_hidden_nh <hidden_nh_uhn_prefix> <hidden_nh_uhn_mask_len> <pib> <rnh> <rnh_mask_len> } ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

hidden-nh

Display hidden next-hop information

__readonly__

(Optional)

uribtibtype_contextname

(Optional)

utibtibtype_topologyname

(Optional)

TABLE_hidden_nh

(Optional)

hidden_nh_uhn_prefix

(Optional)

hidden_nh_uhn_mask_len

(Optional)

pib

(Optional)

rnh

(Optional)

rnh_mask_len

(Optional)

Command Mode

- /exec

show routing ipv6

show routing ipv6 [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ipv6-addr> | { <ipv6-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <ipv6-protocol> [ all ] } | { next-hop <next-hop> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | { [ detail ] [ deleted ] } ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> [ <attached> ] TABLE_path [ <ubest> ] [ <mbest> ] [ <ipnexthop> ] [ <ifname> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <stalelbl> ] [ <hidden> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientnameuni> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientnamemulti> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

l3vm-info

(Optional) Display corresponding L3VM information

rpf

(Optional) Display RPF information for multicast source

longer-prefixes

(Optional) Display matching routes with mask-lengths >= prefix

shorter-prefixes

(Optional) Display matching routes with mask-lengths <= prefix

ipv6-protocol

(Optional) Display routes for protocol (or route type)

all

(Optional) Display routes for protocol for backup next-hops too

next-hop

(Optional) Display routes with this next-hop only

interface

(Optional) Display routes with this output interface only

interface

(Optional) Interface Name

updated

(Optional) Display routes filtered by last updated time

since

(Optional) Display those routes updated since this time

stime

(Optional) Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

until

(Optional) Display those routes updated until this time

utime

(Optional) Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

summary

(Optional) Display route counts

deleted

(Optional) Display delete-pending routes also

detail

(Optional) Display routes in full detail

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ubest

(Optional)

mbest

(Optional)

ifname

(Optional)

pref

(Optional)

tag

(Optional)

metric

(Optional)

uptime

(Optional)

clientname

(Optional)

type

(Optional)

stale

(Optional)

stalelbl

(Optional)

hidden

(Optional)

TABLE_summary

(Optional)

routes

(Optional)

paths

(Optional)

multicast_paths

(Optional)

TABLE_unicast

(Optional)

clientnameuni

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_multicast

(Optional)

clientnamemulti

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_route_count

(Optional)

mask_len

(Optional)

count

(Optional)

Command Mode

- /exec

show routing ipv6 clients

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] clients [ <client> | <ipv6-protocol> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ { TABLE_client <client_name> <pib_index> <pib_state> <pib_id> <multicast_or_unicast_pib> <mru_cache_hits> <mru_cache_misses> [ <mts_sap> ] [ <mts_sap_str> ] [ <bad_l3vm_table_refcount> ] <pib_stale_time> [ { TABLE_nib_node <u6ribtibtype_contextname> <routes> <rnhs> [ { TABLE_notifeee_mask [ <u6pib_name> ] [ <index> ] } ] [ <u6tib_state> ] [ <pending_timer> ] [ <u6rib_state_invalid> ] [ <u6nib_notifier_all> ] [ { TABLE_notify_rcd <notify_rcd_name> <notify_rcd_handle> [ <notifier_pib_u6pib_index> ] } ] [ { TABLE_notifiee_nib <notifiee_pib_u6pib_name> <u6nib_notify_handle> } ] } ] [ { TABLE_ready_client_event_queue <queue_name><queue_count> [ { TABLE_client_event <event> <use_buf> <sched> <resend> <buf> [ <state> ] } ] } ] [ { TABLE_buffer_rqst_client_event_queue <queue_name><queue_count> [ { TABLE_client_event <event> <use_buf> <sched> <resend> <buf> [ <state> ] } ] } ] <update_ack_queue_count> [ { TABLE_update_ack <update_ack> <update_ack_data> <update_ack_type> <update_ack_xid> } ] [ { TABLE_route_buffer_used_queue <queue_name> <queue_count> [ { TABLE_clt_buf <clt_buf><clt_buf_count><clt_buf_xid> } ] } ] [ { TABLE_rnh_buffer_used_queue <queue_name> <queue_count> [ { TABLE_clt_buf <clt_buf><clt_buf_count><clt_buf_xid> } ] } ] [ { TABLE_msgs_rcvd <u6rib_mtype_str><u6pib_rcvd> } ] [ { TABLE_msgs_sent <u6rib_mtype_str><u6pib_sent> } ] } ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

clients

Display u6rib client information

client

(Optional) Display single u6rib client information

ipv6-protocol

(Optional) Display single u6rib client information

__readonly__

(Optional)

TABLE_client

(Optional)

client_name

(Optional)

pib_index

(Optional)

pib_state

(Optional)

pib_id

(Optional)

multicast_or_unicast_pib

(Optional)

mru_cache_hits

(Optional)

mru_cache_misses

(Optional)

mts_sap

(Optional)

mts_sap_str

(Optional)

bad_l3vm_table_refcount

(Optional)

pib_stale_time

(Optional)

TABLE_nib_node

(Optional)

u6ribtibtype_contextname

(Optional)

routes

(Optional)

rnhs

(Optional)

TABLE_notifeee_mask

(Optional)

u6pib_name

(Optional)

index

(Optional)

u6tib_state

(Optional)

pending_timer

(Optional)

u6rib_state_invalid

(Optional)

u6nib_notifier_all

(Optional)

TABLE_notify_rcd

(Optional)

notify_rcd_name

(Optional)

notify_rcd_handle

(Optional)

notifier_pib_u6pib_index

(Optional)

TABLE_notifiee_nib

(Optional)

notifiee_pib_u6pib_name

(Optional)

u6nib_notify_handle

(Optional)

TABLE_ready_client_event_queue

(Optional)

queue_name

(Optional)

queue_count

(Optional)

TABLE_client_event

(Optional)

event

(Optional)

use_buf

(Optional)

sched

(Optional)

resend

(Optional)

buf

(Optional)

state

(Optional)

TABLE_buffer_rqst_client_event_queue

(Optional)

queue_name

(Optional)

queue_count

(Optional)

TABLE_client_event

(Optional)

event

(Optional)

use_buf

(Optional)

sched

(Optional)

resend

(Optional)

buf

(Optional)

state

(Optional)

update_ack_queue_count

(Optional)

TABLE_update_ack

(Optional)

update_ack

(Optional)

update_ack_data

(Optional)

update_ack_type

(Optional)

update_ack_xid

(Optional)

TABLE_route_buffer_used_queue

(Optional)

TABLE_clt_buf

(Optional)

TABLE_rnh_buffer_used_queue

(Optional)

TABLE_clt_buf

(Optional)

TABLE_msgs_rcvd

(Optional)

TABLE_msgs_sent

(Optional)

Command Mode

- /exec

show routing ipv6 event-history

show routing ipv6 [ unicast ] [ internal ] event-history { statistics | msgs | am | cli | detail | errors | general | ha | lfe | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary }

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

internal

(Optional) Commands for internal use

event-history

Show routing event log

statistics

Show routing event log Statistics

msgs

Show routing message event log

am

AM

cli

CLI

detail

Detail

errors

Errors

general

General

ha

HA

lfe

LFE

recursive-next-hop

Recursive next hop

summary

Summary

ufdm

UFDM

ufdm-detail

UFDM Detail

ufdm-summary

UFDM Summary

Command Mode

- /exec

show routing ipv6 hash

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] hash [ mpls <ipv6-prefix> [ eos ] ] <source> <dest> [ ip-proto <ip-proto> ] [ <src-port> <dest-port> ] [ in-interface <in-interface> ] [ module <module-id> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <hash-type> ] [ <mcast> ] [ <hashpath> ] TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ubest> ] [ <mbest> ] [ <ipnexthop> ] [ <ifname> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <hidden> ] ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

hash

Display load-balancing hash information

mpls

(Optional) MPLS path load-balancing hash information

eos

(Optional) Set End-of-Stack to 1

ip-proto

(Optional) IP Protocol information for the packet

ip-proto

(Optional) IP Protocol information for the packet

src-port

(Optional) Source-port

dest-port

(Optional) Destination-port

in-interface

(Optional) Incoming Interface for Packet.Option valid on Tomahawk platform only.

in-interface

(Optional) Interface Name

module

(Optional) Module

module-id

(Optional) Module

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

hash-type

(Optional)

mcast

(Optional)

hashpath

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ubest

(Optional)

mbest

(Optional)

ifname

(Optional)

pref

(Optional)

tag

(Optional)

metric

(Optional)

uptime

(Optional)

clientname

(Optional)

type

(Optional)

stale

(Optional)

hidden

(Optional)

Command Mode

- /exec

show routing ipv6 hidden-nh

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] hidden-nh [ __readonly__ <uribtibtype_contextname> { TABLE_hidden_nh <nh> <nh-iod> <hidden_nh_uhn_prefix> <hidden_nh_uhn_mask_len> <pib> <rnh> <rnh_mask_len> } ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

hidden-nh

Display hidden next-hop information

__readonly__

(Optional)

uribtibtype_contextname

(Optional)

TABLE_hidden_nh

(Optional)

nh

(Optional)

nh-iod

(Optional)

hidden_nh_uhn_prefix

(Optional)

hidden_nh_uhn_mask_len

(Optional)

pib

(Optional)

rnh

(Optional)

rnh_mask_len

(Optional)

Command Mode

- /exec

show routing ipv6 memory estimate

show routing ipv6 [ unicast ] memory estimate [ routes <route-count> next-hops <nh-count> ] [ labels ] [ __readonly__ <curr-max-MB> <curr-max-routes> <curr-max-nh> <inuse-MB> <inuse-routes> <inuse-nh> <conf-max-MB> <conf-max-routes> <conf-max-nh> [ <est-MB> <est-routes> <est-nh> ] ]

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

memory

Display u6rib memory information

estimate

Display u6rib memory estimate

routes

(Optional) Display u6rib memory estimate for # routes

route-count

(Optional) Number of routes

next-hops

(Optional) Display u6rib memory estimate for # next-hops per route

nh-count

(Optional) Number of next-hops per route

labels

(Optional) When the routes are associated with next hop labels

__readonly__

(Optional)

curr-max-MB

(Optional)

curr-max-routes

(Optional)

curr-max-nh

(Optional)

inuse-MB

(Optional)

inuse-routes

(Optional)

inuse-nh

(Optional)

conf-max-MB

(Optional)

conf-max-routes

(Optional)

conf-max-nh

(Optional)

est-MB

(Optional)

est-routes

(Optional)

est-nh

(Optional)

Command Mode

- /exec

show routing ipv6 memory statistics

show routing ipv6 [ unicast ] memory statistics [ __readonly__ { TABLE_shrd_mem <rbuf-alloc> <rbuf-high-water> <rbuf-max> <rbuf-numalloc> <slbs-alloc> <slbs-high-water> <slbs-max> <slbs-numalloc> } { TABLE_u6rib_slabs <slab-name> <alloc-count> <max-allocs> <slab-size> } { TABLE_u6rib_blks <slab-blk-name> <block-count> <max-blocks> <slab-count> } { TABLE_u6rib_routes_rnhs <ctx-name> <user-nodes> <total-nodes> <elem-size> } ]

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast routing information

memory

Display u6rib memory information

statistics

Display u6rib memory statistics

__readonly__

(Optional)

TABLE_shrd_mem

(Optional)

TABLE_u6rib_slabs

(Optional)

TABLE_u6rib_blks

(Optional)

TABLE_u6rib_routes_rnhs

(Optional)

ctx-name

(Optional)

slab-name

(Optional)

slab-blk-name

(Optional)

rbuf-alloc

(Optional)

rbuf-high-water

(Optional)

rbuf-max

(Optional)

rbuf-numalloc

(Optional)

slbs-alloc

(Optional)

slbs-high-water

(Optional)

slbs-max

(Optional)

slbs-numalloc

(Optional)

user-nodes

(Optional)

total-nodes

(Optional)

elem-size

(Optional)

alloc-count

(Optional)

max-allocs

(Optional)

slab-size

(Optional)

block-count

(Optional)

max-blocks

(Optional)

slab-count

(Optional)

Command Mode

- /exec

show routing ipv6 multicast

show routing ipv6 multicast [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ topology <topology-name> ] [ [ bitfield ] | rp | { [ <group> ] summary [ software-forwarded ] } | { summary [ count | software-forwarded ] } | { { <source> <group> } | { <group> [ <source> ] } } [ summary [ software-forwarded ] | bitfield ] ] [ __readonly__ { TABLE_vrf <vrf-name> [ TABLE_addr <mcast-addrs> <pending> <bidir> <uptime> [ TABLE_mpib <mpib-name> <stale-route> ] <if-name><rpf-nbr> <internal> <oif-count><fabric-oif><fabric-loser> [ TABLE_oif <oif-name> <oif-uptime> [ TABLE_oif_mpib <oif-mpib-name> <stale-oif> ] <rpf> ] [ <oif-list-bitfield> ] ] [ <total-route-count> <star-g-count> <source-count> <star-g-prefix-count> <group-count> <avg-sources-per-group><rem> [ <reason-for-route-stats-pending> ] ] [ TABLE_group <group-addr> <group-mask-len> <source-count-per-grp> [ TABLE_source <route-or-source> [ <name> ] <packets> <bytes> <aps> <pps> <bit-rate-in-bps> <oifs> [ <software-pkts> ] ] ] } ]

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

routing

Display routing information

multicast

Display multicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

summary

(Optional) Display route counts

software-forwarded

(Optional) Display software switched route counts only

rp

(Optional) Display RP routes (RP, 0::/128)

count

(Optional) Display route counts only

bitfield

(Optional) Display bitfield details

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_addr

(Optional)

mcast-addrs

(Optional)

bidir

(Optional)

pending

(Optional)

uptime

(Optional)

internal

(Optional)

TABLE_mpib

(Optional)

mpib-name

(Optional)

stale-route

(Optional)

TABLE_oif

(Optional)

oif-name

(Optional)

oif-uptime

(Optional)

rpf

(Optional)

oif-list-bitfield

(Optional)

TABLE_oif_mpib

(Optional)

oif-mpib-name

(Optional)

stale-oif

(Optional)

total-route-count

(Optional)

star-g-count

(Optional)

source-count

(Optional)

star-g-prefix-count

(Optional)

group-count

(Optional)

reason-for-route-stats-pending

(Optional)

TABLE_group

(Optional)

group-addr

(Optional)

group-mask-len

(Optional)

source-count-per-grp

(Optional)

TABLE_source

(Optional)

route-or-source

(Optional)

name

(Optional)

packets

(Optional)

bytes

(Optional)

aps

(Optional)

pps

(Optional)

bit-rate-in-bps

(Optional)

oifs

(Optional)

software-pkts

(Optional)

Command Mode

- /exec

show routing ipv6 multicast clients

show routing ipv6 multicast clients [ <client-name> ] [ __readonly__ { TABLE_client <client-name> <cid> <pid> <mts-sap> <shared-mem> <is-stale-timer-running> <wants-notification> [ TABLE_protocol <SSM-owner> <Bidir-owner> <static-owner> <shared-only-owner> <locally-joined-owner> <external-owner> <Fabric-owner> ] { TABLE_join_notifications <sent> <fail> <ack-rcvd> } { TABLE_prune_notifications <sent> <fail> <ack-rcvd> } { TABLE_rpf_notifications <sent> <fail> <ack-rcvd> } { TABLE_delete_notifications <sent> <fail> <ack-rcvd> } { TABLE_clear_mroute_notifications <sent> <fail> } { TABLE_add_route_req <rcvd> <ack-sent> <ack-fail> } { TABLE_del_route_req <rcvd> <ack-sent> <ack-fail> } { TABLE_upd_route_req <rcvd> <ack-sent> <ack-fail> } { TABLE_mts_route_req <rcvd> <ack-sent> <ack-fail> } } ]

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

multicast

Display multicast information

clients

Display multicast routing client information

client-name

(Optional) Multicast routing client name

__readonly__

(Optional)

TABLE_client

(Optional)

client-name

(Optional)

cid

(Optional)

pid

(Optional)

mts-sap

(Optional)

shared-mem

(Optional)

is-stale-timer-running

(Optional)

wants-notification

(Optional)

TABLE_protocol

(Optional)

SSM-owner

(Optional)

Bidir-owner

(Optional)

static-owner

(Optional)

shared-only-owner

(Optional)

locally-joined-owner

(Optional)

external-owner

(Optional)

Fabric-owner

(Optional)

TABLE_join_notifications

(Optional)

sent

(Optional)

fail

(Optional)

ack-rcvd

(Optional)

TABLE_prune_notifications

(Optional)

sent

(Optional)

fail

(Optional)

ack-rcvd

(Optional)

TABLE_rpf_notifications

(Optional)

sent

(Optional)

fail

(Optional)

ack-rcvd

(Optional)

TABLE_delete_notifications

(Optional)

sent

(Optional)

fail

(Optional)

ack-rcvd

(Optional)

TABLE_clear_mroute_notifications

(Optional)

sent

(Optional)

fail

(Optional)

TABLE_add_route_req

(Optional)

rcvd

(Optional)

ack-sent

(Optional)

ack-fail

(Optional)

TABLE_del_route_req

(Optional)

rcvd

(Optional)

ack-sent

(Optional)

ack-fail

(Optional)

TABLE_upd_route_req

(Optional)

rcvd

(Optional)

ack-sent

(Optional)

ack-fail

(Optional)

TABLE_mts_route_req

(Optional)

rcvd

(Optional)

ack-sent

(Optional)

ack-fail

(Optional)

Command Mode

- /exec

show routing ipv6 multicast event-history

show routing ipv6 multicast [ internal ] event-history { errors | msgs | <m6rib-event-hist-buf-name> | statistics }

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

multicast

Display multicast information

internal

(Optional) Commands for internal use

event-history

Show various event logs of M6RIB

errors

Show error logs of M6RIB

msgs

Show various message logs of M6RIB

m6rib-event-hist-buf-name

M6RIB event history buffer name

statistics

Show the state and size of the buffers

Command Mode

- /exec

show routing ipv6 multicast memory estimate

show routing ipv6 multicast memory estimate [ groups <group-count> sources-per-group <source-count> oifs-per-entry <oif-count> ] [ __readonly__ { { TABLE_cur_max <current-max-mb> <groups> <sources-per-group> <oifs-per-entry> } { TABLE_in_use <in-use_kb> <groups> <sources-per-group> <oifs-per-entry> } { TABLE_conf_max <conf-max-mb> <groups> <sources-per-group> <oifs-per-entry> } [ TABLE_est_max <estimate-mb> <groups> <sources-per-group> <oifs-per-entry> ] } ]

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

multicast

Display multicast information

memory

Display m6rib memory information

estimate

Display m6rib memory estimate

groups

(Optional) Display m6rib memory estimate for # groups

group-count

(Optional) Number of groups

sources-per-group

(Optional) Display mrib memory estimate for # sources per group

source-count

(Optional) Number of sources per route

oifs-per-entry

(Optional) Display mrib memory estimate for # oifs per (S,G) or (*,G) entry

oif-count

(Optional) Number of oifs per entry

__readonly__

(Optional)

TABLE_cur_max

(Optional)

current-max-mb

(Optional)

groups

(Optional)

sources-per-group

(Optional)

oifs-per-entry

(Optional)

TABLE_in_use

(Optional)

in-use_kb

(Optional)

groups

(Optional)

sources-per-group

(Optional)

oifs-per-entry

(Optional)

TABLE_conf_max

(Optional)

conf-max-mb

(Optional)

groups

(Optional)

sources-per-group

(Optional)

oifs-per-entry

(Optional)

TABLE_est_max

(Optional)

estimate-mb

(Optional)

groups

(Optional)

sources-per-group

(Optional)

oifs-per-entry

(Optional)

Command Mode

- /exec

show routing ipv6 nexthop info

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] nexthop info [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

nexthop

Show the nh_info tree

info

Show the nh_info tree

Command Mode

- /exec

show routing ipv6 nhlfe

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] nhlfe [ stats ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ { TABLE_vrf <vrf-name-out> [ <nhlfe-owner> <nhlfe-refcount> { TABLE_nhlabel <nhlabel-index> <nh-label> } <nhlfe-is-vpn> <nhlfe-owner-index> ] <total-entries> } ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

nhlfe

Display NHLFE db

stats

(Optional) Display statistics

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

nhlfe-owner

(Optional)

nhlfe-refcount

(Optional)

TABLE_nhlabel

(Optional)

nhlabel-index

(Optional)

nh-label

(Optional)

nhlfe-is-vpn

(Optional)

nhlfe-owner-index

(Optional)

total-entries

(Optional)

Command Mode

- /exec

show routing ipv6 recursive-next-hop

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] recursive-next-hop [ <ipv6-addr> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <uptime> TABLE_clients <client-req> [ <client-pend> ] ] ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

recursive-next-hop

Display recursive next-hop table

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

uptime

(Optional)

TABLE_clients

(Optional)

client-req

(Optional)

client-pend

(Optional)

Command Mode

- /exec

show routing memory estimate

show routing [ ip | ipv4 ] [ unicast ] memory estimate [ routes <route-count> [ next-hops <nh-count> <nh-unique> ] [ next-hops-v6 <nh6-count> <nh6-unique> ] [ next-hops-srte <srte-count> <srte-unique> ] ] [ labels ] [ __readonly__ <current_max_mb> <current_max_routes> <urib_max_nh> <used_mb> <route_stats_alloc_count> <nhs> <configured_max_mb> <configured_max_routes> <urib_routes_max_nh> [ <estimate_mb> <estimate_routes> <estimate_nhs> <estimate_with_mvpn_mb> <estimate_with_ospf_mb> <estimate_with_eigrp_mb> ] ]

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

memory

Display urib memory information

estimate

Display urib memory estimate

routes

(Optional) Display urib memory estimate for # routes

route-count

(Optional) Number of routes

next-hops

(Optional) Display urib memory estimate for # next-hops per route

nh-count

(Optional) Number of next-hops per route

nh-unique

(Optional) Number of unique next-hops (between 1 and route-count*nh-count)

next-hops-v6

(Optional) Display urib memory estimate for # V6 next-hops per route

nh6-count

(Optional) Number of V6 next-hops per route

nh6-unique

(Optional) Number of unique V6 next-hops (between 1 and route-count*nh6-count)

next-hops-srte

(Optional) Display urib memory estimate for # srte next-hops per route

srte-count

(Optional) Number of srte next-hops per route

srte-unique

(Optional) Number of unique srte next-hops (between 1 and route-count*srte-count)

labels

(Optional) When the routes are associated with next hop labels

__readonly__

(Optional)

current_max_mb

(Optional)

current_max_routes

(Optional)

urib_max_nh

(Optional)

used_mb

(Optional)

route_stats_alloc_count

(Optional)

nhs

(Optional)

configured_max_mb

(Optional)

configured_max_routes

(Optional)

urib_routes_max_nh

(Optional)

estimate_mb

(Optional)

estimate_routes

(Optional)

estimate_nhs

(Optional)

estimate_with_mvpn_mb

(Optional)

estimate_with_ospf_mb

(Optional)

estimate_with_eigrp_mb

(Optional)

Command Mode

- /exec

show routing memory statistics

show routing [ ip | ipv4 ] [ unicast ] memory statistics [ debug ] [ __readonly__ { TABLE_shrd_mem <ubuf-alloc> <ubuf-high-water> <ubuf-max> <ubuf-numalloc> <rbuf-alloc> <rbuf-high-water> <rbuf-max> <rbuf-numalloc> <slbs-alloc> <slbs-high-water> <slbs-max> <slbs-numalloc> } { TABLE_urib_slabs <slab-name> <slab-alloc-count> <slab-max-allocs> <slab-size> } { TABLE_urib_blks <block-name> <block-count> <max-blocks> <blks-count> } { TABLE_urib_routes_rnhs <ctx-name> <user-node> <total-node> <elem-size> } ]

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

memory

Display urib memory information

statistics

Display urib memory statistics

debug

(Optional) Display debugging data

__readonly__

(Optional)

TABLE_shrd_mem

(Optional)

ubuf-alloc

(Optional)

ubuf-high-water

(Optional)

ubuf-max

(Optional)

ubuf-numalloc

(Optional)

rbuf-alloc

(Optional)

rbuf-high-water

(Optional)

rbuf-max

(Optional)

rbuf-numalloc

(Optional)

slbs-alloc

(Optional)

slbs-high-water

(Optional)

slbs-max

(Optional)

slbs-numalloc

(Optional)

TABLE_urib_slabs

(Optional)

slab-name

(Optional)

slab-alloc-count

(Optional)

slab-max-allocs

(Optional)

slab-size

(Optional)

TABLE_urib_blks

(Optional)

block-name

(Optional)

block-count

(Optional)

max-blocks

(Optional)

blks-count

(Optional)

TABLE_urib_routes_rnhs

(Optional)

ctx-name

(Optional)

user-node

(Optional)

total-node

(Optional)

elem-size

(Optional)

Command Mode

- /exec

show routing multicast

show routing [ ip | ipv4 ] multicast { { [ bitfield ] [ detail ] } | rp | { [ <group> ] summary [ software-forwarded | rpf-failed ] } | { summary [ count | software-forwarded | rpf-failed ] } | { { <source> <group> } | { <group> [ <source> ] | <group> shared-tree | <group> source-tree } | shared-tree | source-tree } { [ flags ] | [ detail ] | [ summary [ software-forwarded | rpf-failed ] | bitfield ] } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> [ <expry_timer> ] [ <route_count> ] [ <star_g_cnt> ] [ <sg_cnt> ] [ <star_g_prfx_cnt> ] [ TABLE_route_summary [ <total-num-routes> ] [ <star-g-route> ] [ <sg-route> ] [ <star-g-prfx> ] [ <group-count> ] [ <avg> ] [ <rem> ] [ <stats-pndg> ] ] [ TABLE_summary_source [ <group_addr> ] [ <group_mask_len> ] [ <source_count> ] [ TABLE_one_sg [ <source_addr> ] [ <packets> ] [ <bytes> ] [ <aps> ] [ <pps> ] [ <rate_buf> ] [ <oifs> ] [ <software_fwd> ] [ <rpf-failed-pkts> ] [ <rpf-failed-bytes> ] ] ] [ TABLE_one_route <mcast-addrs> [ <source_addrs> <group_addrs> ] <pending> <bidir> <uptime> <mofrr> [ TABLE_mpib [ <mpib-name> ] [ <oif-count> ] [ <stale-route> ] ] [ <mdt-encap-index> ] [ <stats-pkts> ] [ <stats-bytes> ] [ <stats-rate-buf> ] [ <lisp-src-rloc> ] [ <translated-route-src> ] [ <translated-route-grp> ] [ <route-iif> ] [ <rpf-nbr> ] [ <mofrr-iif> ] [ <mofrr-nbr> ] <internal> [ <oif-count> ] <fabric-oif> <fabric-loser> [ <num-vpc-svi-oifs> ] [ TABLE_oif [ <oif-name> ] [ <oif-uptime> ] [ TABLE_oif_mpib [ <oif-mpib-name> ] [ <stale-oif> ] [ <omd-vpc-svi> ] ] <rpf> ] [ <route-mdt-iod> ] [ <oif-list-bitfield> ] ] ]

Syntax Description

show

Show running system information

ip

(Optional) Display IP information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

routing

Display routing information

ipv4

(Optional) Display IP information

multicast

Display multicast information

summary

Display route counts

shared-tree

Display route for *,G entries

source-tree

Display route for S,G entries

software-forwarded

(Optional) Display software switched route counts only

rpf-failed

(Optional) Display RPF failure statistics

rp

Display RP routes (RP, 0.0.0.0/32)

group

(Optional) Display multicast group/source address for route

source

Display multicast group/source address for route

count

(Optional) Display route counts only

bitfield

(Optional) Display bitfield details

detail

(Optional) Display detailed route attributes

flags

(Optional) Display detailed route attributes

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

expry_timer

(Optional)

route_count

(Optional)

star_g_cnt

(Optional)

sg_cnt

(Optional)

star_g_prfx_cnt

(Optional)

TABLE_summary_source

(Optional)

group_addr

(Optional)

group_mask_len

(Optional)

source_count

(Optional)

TABLE_one_sg

(Optional)

source_addr

(Optional)

packets

(Optional)

bytes

(Optional)

aps

(Optional)

pps

(Optional)

rate_buf

(Optional)

oifs

(Optional)

software_fwd

(Optional)

rpf-failed-pkts

(Optional)

rpf-failed-bytes

(Optional)

TABLE_one_route

(Optional)

mcast-addrs

(Optional)

source_addrs

(Optional)

group_addrs

(Optional)

bidir

(Optional)

pending

(Optional)

mofrr

(Optional)

uptime

(Optional)

TABLE_mpib

(Optional)

mpib-name

(Optional)

oif-count

(Optional)

stale-route

(Optional)

mdt-encap-index

(Optional)

stats-pkts

(Optional)

stats-bytes

(Optional)

stats-rate-buf

(Optional)

lisp-src-rloc

(Optional)

translated-route-src

(Optional)

translated-route-grp

(Optional)

route-iif

(Optional)

rpf-nbr

(Optional)

mofrr-iif

(Optional)

mofrr-nbr

(Optional)

internal

(Optional)

oif-count

(Optional)

fabric-oif

(Optional)

fabric-loser

(Optional)

num-vpc-svi-oifs

(Optional)

TABLE_oif

(Optional)

oif-name

(Optional)

oif-uptime

(Optional)

TABLE_oif_mpib

(Optional)

oif-mpib-name

(Optional)

stale-oif

(Optional)

omd-vpc-svi

(Optional)

rpf

(Optional)

route-mdt-iod

(Optional)

oif-list-bitfield

(Optional)

TABLE_route_summary

(Optional)

total-num-routes

(Optional)

star-g-route

(Optional)

sg-route

(Optional)

star-g-prfx

(Optional)

group-count

(Optional)

avg

(Optional)

rem

(Optional)

stats-pndg

(Optional)

Command Mode

- /exec

show routing multicast clients

show routing [ ip | ipv4 ] multicast clients [ <client-name> ] [ detail ] [ __readonly__ { TABLE_mpib <mpib_name> <mpib_index> <mpib_pid> <mpib_mts_sap> <mpib_shm> <stale_timer> <join_notify> <prune_notify> <rpf_notify> <delete_notify> <repopulate_notify> <zero-oif-notify> <non-zero-oif-notify> <attach-notify> <non-attach-notify> <static-notify> <non-static-notify> <internal-notify> <non-internal-notify><external-notify><non-external-notify> <otv-decap-notify> <no-otv-decap-notify><vxlan-decap-notify> <no-vxlan-decap-notify> <mdt-encap-notify><no-mdt-encap-notify> <mdt-decap-notify> <no-mdt-decap-notify><vpc-svi-notify> <notification_pending> [ <ssm_owner> <bidir_owner> <static_owner> <shared_only_owner> <locally_joined_owner> <external_owner> <mdt_owner> <fabric_owner> <sticky_iif_owner> <data_created_owner> <internal_owner> <prune_owner> <attached_owner> <otv_decap_owner> <vxlan_decap_owner> <secondary_owner> <encap_index_owner> <force_punt_owner> <multi_route_owner> <register_stop_owner> ] <notify_sent> <notify_fail> <notify_ack_rcvd> <add_route_req_rcvd> <add_route_ack_sent> <add_route_ack_fail> <delete_route_req_rcvd> <delete_route_ack_sent> <delete_route_ack_fail> <update_route_req_rcvd> <update_route_ack_sent> <update_route_ack_fail> <update_mdt_info_req_rcvd> <update_mdt_info_ack_sent> <update_mdt_info_ack_fail> <mts_update_route_req_rcvd> <mts_update_route_ack_sent> <mts_update_route_ack_fail> <force_update_rcvd> <notify_member_count> <pending_mpib> <uptime> } ]

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

multicast

Display multicast information

clients

Display multicast routing client information

client-name

(Optional) Multicast routing client name

detail

(Optional) Display detailed route attributes

__readonly__

(Optional)

TABLE_mpib

(Optional)

mpib_name

(Optional)

mpib_index

(Optional)

mpib_pid

(Optional)

mpib_mts_sap

(Optional)

mpib_shm

(Optional)

stale_timer

(Optional)

join_notify

(Optional)

prune_notify

(Optional)

rpf_notify

(Optional)

delete_notify

(Optional)

repopulate_notify

(Optional)

zero-oif-notify

(Optional)

non-zero-oif-notify

(Optional)

attach-notify

(Optional)

non-attach-notify

(Optional)

static-notify

(Optional)

non-static-notify

(Optional)

internal-notify

(Optional)

otv-decap-notify

(Optional)

no-vxlan-decap-notify

(Optional)

mdt-decap-notify

(Optional)

notification_pending

(Optional)

ssm_owner

(Optional)

bidir_owner

(Optional)

static_owner

(Optional)

shared_only_owner

(Optional)

locally_joined_owner

(Optional)

external_owner

(Optional)

mdt_owner

(Optional)

fabric_owner

(Optional)

sticky_iif_owner

(Optional)

data_created_owner

(Optional)

internal_owner

(Optional)

prune_owner

(Optional)

attached_owner

(Optional)

otv_decap_owner

(Optional)

vxlan_decap_owner

(Optional)

secondary_owner

(Optional)

encap_index_owner

(Optional)

force_punt_owner

(Optional)

multi_route_owner

(Optional)

register_stop_owner

(Optional)

notify_sent

(Optional)

notify_fail

(Optional)

notify_ack_rcvd

(Optional)

add_route_req_rcvd

(Optional)

add_route_ack_sent

(Optional)

add_route_ack_fail

(Optional)

delete_route_req_rcvd

(Optional)

delete_route_ack_sent

(Optional)

delete_route_ack_fail

(Optional)

update_route_req_rcvd

(Optional)

update_route_ack_sent

(Optional)

update_route_ack_fail

(Optional)

update_mdt_info_req_rcvd

(Optional)

update_mdt_info_ack_sent

(Optional)

update_mdt_info_ack_fail

(Optional)

mts_update_route_req_rcvd

(Optional)

mts_update_route_ack_sent

(Optional)

mts_update_route_ack_fail

(Optional)

force_update_rcvd

(Optional)

notify_member_count

(Optional)

pending_mpib

(Optional)

uptime

(Optional)

Command Mode

- /exec

show routing multicast event-history

show routing [ ip | ipv4 ] multicast [ internal ] event-history { errors | msgs | <mrib-event-hist-buf-name> | statistics }

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

multicast

Display multicast information

internal

(Optional) Commands for internal use

event-history

Show various event logs of MRIB

errors

Show error logs of MRIB

msgs

Show various message logs of MRIB

mrib-event-hist-buf-name

Event history buffer name

statistics

State and size of buffer

Command Mode

- /exec

show routing multicast mdt encapsulation

show routing [ ip | ipv4 ] multicast mdt encapsulation [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <vrf-name> [ TABLE_mdt <index> <group> <source> <count> <delete-pending> ] ] ]

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

multicast

Display multicast information

mdt

Multicast Distribution Tree

encapsulation

Encapsulation Information

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_mdt

(Optional)

index

(Optional)

group

(Optional)

source

(Optional)

count

(Optional)

delete-pending

(Optional)

Command Mode

- /exec

show routing multicast memory estimate

show routing [ ip | ipv4 ] multicast memory estimate [ groups <group-count> sources-per-group <source-count> oifs-per-entry <oif-count> [ mdt-encap-entries <encap-entry-count> ] ] [ __readonly__ [ TABLE_currentmax [ <max-mb> ] [ <max-groups> ] [ <sources-per-group> ] [ <oifs-per-entry> ] ] [ TABLE_inuse [ <used-kb> ] [ <alloc-count> ] [ <sources-per-group> ] [ <oifs-per-entry> ] [ <mdt-encap-entry> ] ] [ TABLE_configuredmax [ <max-mb> ] [ <max-groups> ] [ <sources-per-group> ] [ <oifs-per-entry> ] ] [ TABLE_estimate [ <estimate-mb> ] [ <groups> ] [ <sources-per-group> ] [ <oifs-per-entry> ] [ <mdt-encap-entry> ] ] ]

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

multicast

Display multicast information

memory

Display mrib memory information

estimate

Display mrib memory estimate

groups

(Optional) Display mrib memory estimate for # groups

group-count

(Optional) Number of groups

sources-per-group

(Optional) Display mrib memory estimate for # sources per group

source-count

(Optional) Number of sources per route

oifs-per-entry

(Optional) Display mrib memory estimate for # oifs per (S,G) or (*,G) entry

oif-count

(Optional) Number of oifs per entry

mdt-encap-entries

(Optional) Display mrib memory estimate for # mdt encap entries

encap-entry-count

(Optional) Number of mdt encap entries

__readonly__

(Optional)

TABLE_currentmax

(Optional)

max-mb

(Optional)

max-groups

(Optional)

sources-per-group

(Optional)

oifs-per-entry

(Optional)

TABLE_inuse

(Optional)

used-kb

(Optional)

alloc-count

(Optional)

sources-per-group

(Optional)

oifs-per-entry

(Optional)

mdt-encap-entry

(Optional)

TABLE_configuredmax

(Optional)

max-mb

(Optional)

max-groups

(Optional)

sources-per-group

(Optional)

oifs-per-entry

(Optional)

TABLE_estimate

(Optional)

estimate-mb

(Optional)

groups

(Optional)

sources-per-group

(Optional)

oifs-per-entry

(Optional)

mdt-encap-entry

(Optional)

Command Mode

- /exec

show routing multicast sr

show routing [ ip | ipv4 ] multicast sr [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

multicast

Display multicast information

sr

Service Reflect Rules

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show routing nhlfe

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] nhlfe [ stats ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <nhlfe-owner> <nhlfe-refcount> { TABLE_nhlabel <nhlabel-index> <nh-label> } <nhlfe-is-vpn> <nhlfe-owner-index> ] <total-entries> ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

nhlfe

Display URIB NHLFE db

stats

(Optional) Display statistics

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

nhlfe-owner

(Optional)

nhlfe-refcount

(Optional)

TABLE_nhlabel

(Optional)

nhlabel-index

(Optional)

nh-label

(Optional)

nhlfe-is-vpn

(Optional)

nhlfe-owner-index

(Optional)

total-entries

(Optional)

Command Mode

- /exec

show routing recursive-next-hop

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] recursive-next-hop [ <ip-addr> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <uptime> TABLE_clients <clientname> ] ]

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

recursive-next-hop

Display recursive next-hop table

topology-name

(Optional) topology name

ip-addr

(Optional) Display single recursive virtual next-hop

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional) Address type

TABLE_prefix

(Optional)

ipprefix

(Optional)

uptime

(Optional)

TABLE_clients

(Optional)

clientname

(Optional)

Command Mode

- /exec

show routing unresolved-next-hop

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] unresolved-next-hop { [ <ip-addr> [ detail ] ] | [ summary ] } [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ]

Syntax Description

show

Show running system information

routing

Display routing information

unresolved-next-hop

Display unresolved next-hop list

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

ip-addr

(Optional) Display single unresolved next-hop

detail

(Optional) Display prefixes for unresolved next-hop

summary

(Optional) Show summary of resolve buffers

Command Mode

- /exec

show running-config

show running-config

Syntax Description

show

Show running system information

running-config

Current operating configuration

Command Mode

- /exec

show running-config aaa

show running-config aaa [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

aaa

Display aaa configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config acllog

show running-config acllog [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

acllog

show running config for acllog

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config aclmgr

show running-config aclmgr [ all | inactive-if-config ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

aclmgr

show running config for aclmgr

all

(Optional) show running config with defaults

inactive-if-config

(Optional) show running config for inactive-policies

Command Mode

- /exec

show running-config aclmgr active

show running-config aclmgr { active-if-config | all-if-config }

Syntax Description

show

Show running system information

running-config

Current operating configuration

aclmgr

show running config for aclmgr

active-if-config

show running config for active-policies

all-if-config

show running config for all-policies

Command Mode

- /exec

show running-config adjmgr

show running-config adjmgr [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

adjmgr

Display adjmgr information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config all

show running-config all

Syntax Description

show

Show running system information

running-config

Current operating configuration

all

Current operating configuration with defaults

Command Mode

- /exec

show running-config amt

show running-config amt [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

amt

Display amt information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config arp

show running-config arp [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

arp

Display arp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config assoc

show running-config assoc [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

assoc

Original ID to Translated ID Association

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config backup

show running-config { backup | flexlink } [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

backup

Show running config for Switchport Backup

flexlink

Show running config for Switchport Backup

all

(Optional) Show config with defaults

Command Mode

- /exec

show running-config bfd

show running-config bfd [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

bfd

show running config for bfd

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config bgp

show running-config bgp [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

bgp

Display bgp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config bloggerd

show running-config bloggerd [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

bloggerd

Display bloggerd configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config callhome

show running-config callhome [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

callhome

Display callhome configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config catena

show running-config catena

Syntax Description

show

show running-cfg

running-config

show running system information

catena

catena instances

Command Mode

- /exec

show running-config cdp

show running-config cdp [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

cdp

Display cdp configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config cert-enroll

show running-config cert-enroll [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

cert-enroll

Display certificates configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config cfs

show running-config cfs [ all ]

Syntax Description

show

Show running system information

running-config

Current operation configuration

cfs

Display cfs configurations

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config clock_manager

show running-config clock_manager [ all ]

Syntax Description

running-config

Current operating configuration

clock_manager

show running config for clock manager

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config config-profile

show running-config config-profile [ <all_conf_profile_name> ]

Syntax Description

show

Show running-cfg

running-config

show running configuration

config-profile

Display port-profile configuration

all_conf_profile_name

(Optional) Enter the name of the profile

Command Mode

- /exec

show running-config config-template

show running-config config-template

Syntax Description

show

Show running system information

running-config

Current operationg configuration

config-template

Display config-template configuration

Command Mode

- /exec

show running-config controller

show running-config controller

Syntax Description

show

Show running system information

running-config

Current operating configuration

controller

controller

Command Mode

- /exec

show running-config copp

show running-config copp [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

copp

Control-Plane Policing

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config dhcp

show running-config dhcp [ all ]

Syntax Description

show

Show running system information

running-config

Current operation configuration

dhcp

Display dhcp snoop configurations

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config diagnostic

show running-config diagnostic [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

diagnostic

Display diagnostic information

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config diff

show running-config diff

Syntax Description

show

Show running system information

running-config

Current operating configuration

diff

Show the difference between running and startup configuration

Command Mode

- /exec

show running-config dot1x

show running-config dot1x [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

dot1x

Display dot1x configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config ecp

show running-config ecp [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

ecp

ECP (Edge Control Protocol)

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config eem

show running-config eem

Syntax Description

show

Show running system information

running-config

Show the system running configuration

eem

Show the event manager running configuration

Command Mode

- /exec

show running-config eigrp

show running-config eigrp [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

eigrp

Display eigrp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config eltm

show running-config eltm

Syntax Description

show

Show running system information

running-config

Current operation configuration

eltm

Display eltm configurations

Command Mode

- /exec

show running-config evb

show running-config evb [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

evb

EVB (Edge Virtual Bridge)

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config exclude

show running-config exclude <feature-list> +

Syntax Description

show

Show running system information

running-config

Current operating configuration

exclude

Exclude running configuration of specified features

feature-list

Exclude features

Command Mode

- /exec

show running-config exclude fabricpath

show running-config exclude fabricpath

Syntax Description

show

Show running system information

running-config

Current operating configuration

exclude

Exclude configurations

fabricpath

fabricpath information

Command Mode

- /exec

show running-config expand-port-profile

show running-config expand-port-profile

Syntax Description

show

Show running system information

running-config

Current operating configuration

expand-port-profile

Expand port profile

Command Mode

- /exec

show running-config explicit

show running-config explicit

Syntax Description

show

Show running system information

running-config

Current operating configuration

explicit

show explicitly configured running configuration for all interfaces

Command Mode

- /exec

show running-config fabric forwarding

show running-config fabric forwarding [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config fabric multicast

show running-config fabric multicast [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

fabric

Fabric

multicast

Multicast information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config fcoe_mgr

show running-config fcoe_mgr [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

fcoe_mgr

Display fcoe_mgr configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config hardware-telemetry

show running-config hardware-telemetry [ all ]

Syntax Description

running-config

Current operating configuration

hardware-telemetry

show running config for hardware-telemetry

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config hsrp

show running-config hsrp [ all ]

Syntax Description

show

Show system information

running-config

System running configuration

hsrp

HSRP running configuration

all

(Optional) Show HSRP running configuration defaults

Command Mode

- /exec

show running-config icam

show running-config icam

Syntax Description

show

show running-cfg

running-config

show running system information

icam

icam services

Command Mode

- /exec

show running-config icmpv6

show running-config icmpv6 [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

icmpv6

Display icmpv6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config igmp

show running-config igmp [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

igmp

Display igmp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config imp

show running-config imp [ all ]

Syntax Description

show

Show system information

running-config

System running configuration

imp

IMP running configuration

all

(Optional) Show IMP running configuration defaults

Command Mode

- /exec

show running-config interface

show running-config interface <if0> [ membership ] [ expand-port-profile ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

interface

Interface configuration

if0

interface type and number in module/slot format

membership

(Optional) Show membership information

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show running-config interface

show running-config interface [ <if0> ] [ all ] [ expand-port-profile ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

interface

Interface configuration

if0

(Optional) interface type and number in module/slot format

all

(Optional) show running config with defaults

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show running-config interface defaults

show running-config interface <if0> defaults

Syntax Description

show

Show running system information

running-config

Current operating configuration

interface

Interface configuration

if0

interface type and number in module/slot format

defaults

show default running config

Command Mode

- /exec

show running-config interface explicit

show running-config interface <if0> explicit

Syntax Description

show

Show running system information

running-config

Current operating configuration

interface

Interface configuration

if0

interface type and number in module/slot format

explicit

show default running config

Command Mode

- /exec

show running-config ip

show running-config ip [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

ip

Display ip information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config ipqos

show running-config ipqos [ all | inactive-if-config ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

all

(Optional) show running config with defaults

inactive-if-config

(Optional) show running config for inactive-policies

Command Mode

- /exec

show running-config ipqos active

show running-config ipqos { active-if-config | all-if-config }

Syntax Description

show

Show running system information

running-config

Current operating configuration

active-if-config

show running config for active-policies

all-if-config

show running config for all-policies

Command Mode

- /exec

show running-config ipv6

show running-config ipv6 [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

ipv6

Display ipv6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config isis

show running-config isis [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

isis

Display isis information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config l3vm

show running-config l3vm [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

l3vm

Display l3vm information

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config ldap

show running-config ldap [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

ldap

Display ldap configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config license

show running-config license [ all ]

Syntax Description

show

show

running-config

show running system information

license

Display licensing configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config lldp

show running-config lldp [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

lldp

Display lldp configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config macsec

show running-config macsec

Syntax Description

show

Show running system information

running-config

Current operating configuration

macsec

Show CTS information

Command Mode

- /exec

show running-config mmode

show running-config mmode [ all ]

Syntax Description

show

Show running system information

running-config

Show running configuration

mmode

Display maintenance mode running configuration

all

(Optional) Show running config with defaults

Command Mode

- /exec

show running-config monitor

show running-config monitor [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

monitor

Configure Ethernet SPAN sessions

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config mpls ldp

show running-config mpls ldp [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

all

(Optional) Display running-config with defaults

Command Mode

- /exec

show running-config mpls static

show running-config mpls static [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

mpls

Display MPLS status and configuration

static

Static Label Bindings

all

(Optional) Display running-config with defaults

Command Mode

- /exec

show running-config mpls strip

show running-config mpls strip [ all ]

Syntax Description

show

Show running system information

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

running-config

System running configuration

all

(Optional) Show running configuration for STRIPCL with defaults

Command Mode

- /exec

show running-config mpls traffic-eng

show running-config mpls traffic-eng [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

mpls

show running config for mpls features

traffic-eng

show running-config for Traffic Engineering

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config msdp

show running-config msdp [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

msdp

Display msdp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config nat

show running-config nat [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

nat

Display NAT configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config nbm

show running-config nbm

Syntax Description

show

Show running system information

running-config

Current operating configuration

nbm

Non Blocking Multicast

Command Mode

- /exec

show running-config netflow

show running-config { netflow | nfm } [ all ]

Syntax Description

show

Show running system information

running-config

Show running system information

netflow

Show NetFlow configuration

nfm

Show NFM configuration

all

(Optional) Show config with defaults

Command Mode

- /exec

show running-config ngoam

show running-config ngoam [ all ]

Syntax Description

show

Show running system information

running-config

Show running system information

ngoam

ngoam configuration

all

(Optional) Show running config with defaults

Command Mode

- /exec

show running-config ntp

show running-config ntp [ all ]

Syntax Description

show

Show information

running-config

Show running system configuration

ntp

Show NTP information

all

(Optional) Show all NTP running configuration

Command Mode

- /exec

show running-config nv overlay

show running-config nv overlay [ all ]

Syntax Description

show

Show system information

running-config

System running configuration

nv

NVE running configuration

overlay

NVE running configuration

all

(Optional) Show NVE running configuration defaults

Command Mode

- /exec

show running-config nxsdk

show running-config nxsdk [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

nxsdk

NXOS SDK

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config openflow

show running-config openflow [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

openflow

Show running config for OpenFlow agent

all

(Optional) Show running config with defaults

Command Mode

- /exec

show running-config ospf

show running-config ospf [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

ospf

Display ospf information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config ospfv3

show running-config ospfv3 [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

ospfv3

Display ospfv3 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config param-list

show running-config param-list [ <plistname> ]

Syntax Description

show

Show running-cfg

running-config

show running configuration

param-list

Display param-list configuration

plistname

(Optional) Enter the name of the param list

Command Mode

- /exec

show running-config pim

show running-config pim [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

pim

Display pim information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config pim6

show running-config pim6 [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

pim6

Display pim6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config plb-services

show running-config plb-services

Syntax Description

show

show running-cfg

running-config

show running system information

plb-services

PLB services

Command Mode

- /exec

show running-config poe

show running-config poe [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

poe

Power over Ethernet

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config port-profile

show running-config port-profile [ <all_profile_name> ]

Syntax Description

show

Show running-cfg

running-config

show running configuration

port-profile

Display port-profile configuration

all_profile_name

(Optional) Enter the name of the profile

Command Mode

- /exec

show running-config port-security

show running-config port-security [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

port-security

Display port-security configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config ptp

show running-config ptp [ all ]

Syntax Description

running-config

Current operating configuration

ptp

show running config for ptp

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config radius

show running-config radius [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

radius

Display radius configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config res_mgr

show running-config res_mgr

Syntax Description

show

Show running system information

running-config

Current operating configuration

res_mgr

Show resource configuration for VDC

Command Mode

- /exec

show running-config rip

show running-config rip [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

rip

Display rip information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config routing ip multicast

show running-config routing { ip | ipv4 } multicast [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

routing

Display routing information

ip

Display IP information

ipv4

Display IP information

multicast

Display multicast information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config routing ipv6 multicast

show running-config routing ipv6 multicast [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

routing

Display routing information

ipv6

Display IPv6 information

multicast

Display m6rib information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config rpm

show running-config rpm [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

rpm

Display Route Policy Manager (RPM) information

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config section

show running-config section <section>

Syntax Description

show

Show running system information

running-config

Current operating configuration

section

show only a particular section of running-config (in format needed for 'merge config' command)

section

the section to show, a regular expression, (use a dot for a space)

Command Mode

- /exec

show running-config security

show running-config security [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

security

Display security configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config segment-routing

show running-config segment-routing [ all ]

Syntax Description

show

Show running system information

running-config

Show running configuration

segment-routing

Display segment-routing running configuration

all

(Optional) Show running config with defaults

Command Mode

- /exec

show running-config services

show running-config services

Syntax Description

show

show running-cfg

running-config

show running system information

services

services

Command Mode

- /exec

show running-config services

show running-config services

Syntax Description

show

show running-cfg

running-config

show running system information

services

services

Command Mode

- /exec

show running-config sflow

show running-config sflow [ all ]

Syntax Description

running-config

Current operating configuration

sflow

show running config for sflow

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config sla responder

show running-config sla responder

Syntax Description

show

show running-cfg

running-config

show running system information

sla

Service Level Agreement (SLA)

responder

Show information about sla-responder

Command Mode

- /exec

show running-config sla sender

show running-config sla sender

Syntax Description

show

show running-cfg

running-config

show running system information

sla

Service Level Agreement (SLA)

sender

Show information about sla-sender

Command Mode

- /exec

show running-config sla twamp-server

show running-config sla twamp-server

Syntax Description

show

show running-cfg

running-config

show running system information

sla

Service Level Agreement (SLA)

twamp-server

Show IPSLA IPPM TWAMP server configuration

Command Mode

- /exec

show running-config smart-channel

show running-config smart-channel

Syntax Description

show

show running-cfg

running-config

show running system information

smart-channel

smart channel services

Command Mode

- /exec

show running-config snmp

show running-config snmp [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

snmp

Display snmp configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config spanning-tree

show running-config spanning-tree [ <all> | interface <interface_range> ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

spanning-tree

Show spanning tree information

all

(Optional)

interface

(Optional) Specify an interface as a target for the command

interface_range

(Optional)

Command Mode

- /exec

show running-config srte

show running-config srte

Syntax Description

show

Show running system information

running-config

Current operating configuration

srte

SRTE

Command Mode

- /exec

show running-config switch

show running-config { switch-profile | include-switch-profile }

Syntax Description

show

Show running system information

running-config

Current operating configuration

switch-profile

Show switch-profile information

include-switch-profile

Show running and switch-profile configuration

Command Mode

- /exec

show running-config tacacs

show running-config tacacs + [ all ]

Syntax Description

show

show running-cfg

running-config

show running system information

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config telemetry

show running-config telemetry [ all ]

Syntax Description

show

show running system configuration

running-config

Current operating configuration

telemetry

Display telemetry configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config track

show running-config track [ all ]

Syntax Description

show

Show running system information

running-config

Show the system running information

track

Show track running configuration

all

(Optional) Show track running configuration defaults

Command Mode

- /exec

show running-config udld

show running-config udld [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

udld

Show udld configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vdc-all

show running-config vdc-all [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

vdc-all

Display config from all VDC

all

(Optional) Display config from all VDC including defaults

Command Mode

- /exec

show running-config vdc

show running-config vdc [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

vdc

Show Virtual Device Contexts

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config virtual-service

show running-config virtual-service

Syntax Description

show

Show running system information

running-config

Current operating configuration

virtual-service

Show running config for virtualization services

Command Mode

- /exec

show running-config vlan

show running-config vlan <vlan-id> [ expand-port-profile ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

vlan

Vlan commands

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show running-config vlan

show running-config vlan

Syntax Description

show

Show running system information

running-config

Current operating configuration

vlan

Vlan commands

Command Mode

- /exec

show running-config vlan

show running-config vlan <vlan-id> [ expand-port-profile ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

vlan

Vlan commands

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show running-config vlan_mgr

show running-config vlan_mgr

Syntax Description

show

Show running system information

running-config

Current operating configuration

vlan_mgr

Show vlan manager information

Command Mode

- /exec

show running-config vmtracker

show running-config vmtracker [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

vmtracker

show running config for vmtracker

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vpc

show running-config vpc [ all ]

Syntax Description

running-config

Current operating configuration

vpc

show running config for vPC

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vrf

show running-config vrf <vrf-cfg-name> [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

vrf

Display VRF information

vrf-cfg-name

Configurable VRF name

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config vrf default

show running-config vrf default [ all ]

Syntax Description

show

Show running system information

running-config

Current operationg configuration

vrf

Display VRF information

default

Known VRF name

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config vrrp

show running-config vrrp [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

vrrp

Display VRRP running configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vrrpv3

show running-config vrrpv3 [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

vrrpv3

Show running config for VRRPv3

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vshd

show running-config vshd

Syntax Description

show

Show running system information

running-config

Current operating configuration

vshd

Show running config for vshd

Command Mode

- /exec

show running-config vtp

show running-config vtp [ all ]

Syntax Description

show

Show running system information

running-config

Current operating configuration

vtp

Show running configuration for VTP

all

(Optional) Show running configuration for VTP with defaults

Command Mode

- /exec

show running-config wwnm

show running-config wwnm

Syntax Description

show

Show running system information

running-config

Current running configuration

wwnm

Display WWN Manager running configuration

Command Mode

- /exec

Chapter 19. S Show Commands

- show san-port-channel compatibility-parameters

- show san-port-channel consistency

- show san-port-channel consistency detail

- show san-port-channel database

- show san-port-channel summary

- show san-port-channel usage

- show scheduler config

- show scheduler job

- show scheduler logfile

- show scheduler schedule

- show segment-routing

- show segment-routing clients

- show segment-routing ipv4 connected-prefix-sid-map

- show sflow

- show sflow statistics

- show smart-channel

- show snapshots

- show snapshots compare

- show snapshots compare ipv4routes

- show snapshots compare ipv6routes

- show snapshots compare summary

- show snapshots dump

- show snapshots dump

- show snapshots sections

- show snmp-dhcp-relay drop statistics

- show snmp-dhcp-relay statistics pkt

- show snmp-ipv6-dhcp-relay drop statistics

- show snmp-ipv6-dhcp-relay statistics pkt

- show snmp

- show snmp community

- show snmp context

- show snmp engineID

- show snmp group

- show snmp host

- show snmp mib igmpCacheTable

- show snmp mib igmpInterfaceTable

- show snmp mib pimCandidateRPTable

- show snmp mib pimComponentTable

- show snmp mib pimInterfaceTable

- show snmp mib pimIpMRouteNextHopTable

- show snmp mib pimIpMRouteTable

- show snmp mib pimJoinPruneInterval

- show snmp mib pimNeighborTable

- show snmp mib pimRPSetTable

- show snmp nms-statistics

- show snmp oid-statistics

- show snmp pss

- show snmp roledebug

- show snmp sessions

- show snmp snmpv3stats

- show snmp source-interface

- show snmp trap

- show snmp user

- show sockets buffers

- show sockets client

- show sockets connection

- show sockets keychain-dump

- show sockets local-port-range

- show sockets ns-port-kiosk

- show sockets performance

- show sockets secure-lxc

- show sockets statistics

- show sockets tcp keychain binding

- show spanning-tree

- show spanning-tree blockedports

- show spanning-tree bridge

- show spanning-tree inconsistentports

- show spanning-tree interface

- show spanning-tree interface

- show spanning-tree issu-impact

- show spanning-tree mst

- show spanning-tree mst configuration

- show spanning-tree mst configuration digest

- show spanning-tree mst interface

- show spanning-tree pathcost method

- show spanning-tree root

- show spanning-tree summary

- show spanning-tree summary totals

- show sprom

- show srte pce ipv4 peer

- show srte policy

- show srte policy fh

- show ssh key

- show ssh server

- show ssx details

- show ssx exporter

- show ssx monitor

- show ssx record

- show startup-config

- show startup-config aaa

- show startup-config acllog

- show startup-config aclmgr

- show startup-config adjmgr

- show startup-config amt

- show startup-config arp

- show startup-config assoc

- show startup-config backup

- show startup-config bfd

- show startup-config bgp

- show startup-config bloggerd

- show startup-config callhome

- show startup-config catena

- show startup-config cdp

- show startup-config cert-enroll

- show startup-config cfs

- show startup-config config-profile

- show startup-config copp

- show startup-config dhcp

- show startup-config diagnostic

- show startup-config dot1x

- show startup-config ecp

- show startup-config eem

- show startup-config eigrp

- show startup-config eltm

- show startup-config evb

- show startup-config exclude

- show startup-config expand-port-profile

- show startup-config fabric forwarding

- show startup-config fabric multicast

- show startup-config fcoe_mgr

- show startup-config hardware-telemetry

- show startup-config hsrp

- show startup-config icam

- show startup-config icmpv6

- show startup-config igmp

- show startup-config imp

- show startup-config interface

- show startup-config interface

- show startup-config ip

- show startup-config ipqos

- show startup-config ipv6

- show startup-config isis

- show startup-config l3vm

- show startup-config ldap

- show startup-config license

- show startup-config lldp

- show startup-config log

- show startup-config macsec

- show startup-config mmode

- show startup-config monitor

- show startup-config mpls static

- show startup-config mpls strip

- show startup-config mpls traffic-eng

- show startup-config msdp

- show startup-config nat

- show startup-config nbm

- show startup-config netflow

- show startup-config ngoam

- show startup-config ntp

- show startup-config nv overlay

- show startup-config nxsdk

- show startup-config openflow

- show startup-config ospf

- show startup-config ospfv3

- show startup-config param-list

- show startup-config pim

- show startup-config pim6

- show startup-config plb-services

- show startup-config poe

- show startup-config port-profile

- show startup-config port-security

- show startup-config ptp

- show startup-config radius

- show startup-config rip

- show startup-config routing ip multicast

- show startup-config routing ipv6 multicast

- show startup-config rpm

- show startup-config security

- show startup-config segment-routing

- show startup-config services

- show startup-config sflow

- show startup-config sla responder

- show startup-config sla sender

- show startup-config sla twamp-server

- show startup-config smart-channel

- show startup-config snmp

- show startup-config srte

- show startup-config switch

- show startup-config tacacs

- show startup-config telemetry

- show startup-config track

- show startup-config udld

- show startup-config vdc-all

- show startup-config vdc

- show startup-config virtual-service

- show startup-config vlan

- show startup-config vlan

- show startup-config vmtracker

- show startup-config vpc

- show startup-config vrf

- show startup-config vrf default

- show startup-config vrrpv3

- show startup-config vshd

- show startup-config vtp

- show startup-config wwnm

- show summary

- show sup-monitor drops session

- show switch-profile

- show switch-profile

- show switch-profile buffer

- show switch-profile peer

- show switch-profile status

- show switch-scope controller

- show switching-mode

- show switching-mode fabric-speed

- show system acl

- show system auto-collect tech-support

- show system boottime

- show system clis event-history

- show system config reload-pending

- show system cores

- show system default switchport

- show system dme status

- show system error-id

- show system exception-info

- show system fabric-mode

- show system fast-reload stabilization-timer

- show system inband queuing statistics

- show system inband queuing status

- show system kgdb

- show system login

- show system login failures

- show system memory-thresholds

- show system mode

- show system nve infra-vlans

- show system pss shrink status

- show system redundancy ha status

- show system redundancy status

- show system reset-reason

- show system reset-reason

- show system reset-reason module

- show system resources

- show system resources

- show system resources module

- show system resources module all

- show system routing mode

- show system srg

- show system standby manual-boot

- show system switch-mode

- show system switchover impact

- show system uptime

- show system verify bios flash

- show system vlan reserved

show san-port-channel compatibility-parameters

show san-port-channel compatibility-parameters [ __readonly__ [ { TABLE_compatibility_params <parameter> <description> } ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

compatibility-parameters

Show san-port-channel compatibility-parameters

__readonly__

(Optional) Read Only

TABLE_compatibility_params

(Optional) Table with compatibility params

parameter

(Optional) Compatibity parameter

description

(Optional) Parameter description

Command Mode

- /exec

show san-port-channel consistency

show san-port-channel consistency [ __readonly__ [ <msg> ] [ { [ <error_msg> ] [ <consistency_state> ] [ <module> ] [ { TABLE_inconsistent_database [ <database> ] [ { [ <total_port_channels> ] [ { TABLE_san_port_channel_database [ <interface> ] [ <total_ports> ] [ <first_operational_port> ] [ { TABLE_san_port_channel_member <port> <state> } ] [ <db_error_str> ] } ] } ] } ] } ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

consistency

Show san-port-channel distributed database consistency

__readonly__

(Optional) Read Only

msg

(Optional) Message string

error_msg

(Optional) Prints consistency errors, if any

consistency_state

(Optional) Consistency state

module

(Optional) Module no

TABLE_inconsistent_database

(Optional) Table with details of inconsistent dbs

database

(Optional) Inconsistent database

TABLE_san_port_channel_database

(Optional) san-po Table

total_port_channels

(Optional) Total port channels

interface

(Optional) san-port-channel interface

first_operational_port

(Optional) First oper port in san-po

total_ports

(Optional) Total number of ports in the san-po

TABLE_san_port_channel_member

(Optional) san-po member Table

port

(Optional) san-po member port

state

(Optional) san-po member port state

db_error_str

(Optional) prints cmd errors, if any

Command Mode

- /exec

show san-port-channel consistency detail

show san-port-channel consistency detail [ __readonly__ [ <sup_total_port_channels> ] [ { [ <sup_db_error_str> ] [ { TABLE_sup_san_port_channel_database <sup_interface> [ <sup_total_ports> ] [ <sup_first_operational_port> ] [ { TABLE_sup_san_port_channel_member <sup_port> <sup_state> } ] } ] } ] [ <msg> ] [ { [ <error_msg> ] [ <db_index> ] [ <module> ] [ { [ <total_port_channels> ] [ { TABLE_san_port_channel_database [ <interface> ] [ <total_ports> ] [ <first_operational_port> ] [ { TABLE_san_port_channel_member <port> <state> } ] [ <db_error_str> ] } ] } ] } ] [ <consistency_state> ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

consistency

Show san-port-channel distributed database consistency

detail

Show san-port-channel distributed databases of all modules

__readonly__

(Optional) Read Only

sup_total_port_channels

(Optional) Authoritative po db - Total POs

TABLE_sup_san_port_channel_database

(Optional) Table with details of auth po db

sup_interface

(Optional) san-port-channel interface

sup_first_operational_port

(Optional) First oper port in san-po

sup_total_ports

(Optional) Total number of ports in the san-po

TABLE_sup_san_port_channel_member

(Optional) san-po member Table

sup_port

(Optional) san-po member port

sup_state

(Optional) san-po member port state

sup_db_error_str

(Optional) prints cmd errors, if any

msg

(Optional) Msg string

error_msg

(Optional) Prints errors, if any

db_index

(Optional) Database index

module

(Optional) Module no

total_port_channels

(Optional) Authoritative po db - Total POs

TABLE_san_port_channel_database

(Optional) Table with details of auth po db

interface

(Optional) san-port-channel interface

first_operational_port

(Optional) First oper port in san-po

total_ports

(Optional) Total number of ports in the san-po

TABLE_san_port_channel_member

(Optional) san-po member Table

port

(Optional) san-po member port

state

(Optional) san-po member port state

db_error_str

(Optional) prints cmd errors, if any

consistency_state

(Optional) Consistency state

Command Mode

- /exec

show san-port-channel database

show san-port-channel database [ interface <ifid> | all ] [ __readonly__ [ <error_str> ] [ { TABLE_san_port_channel_database <interface> <admin_chan_mode> <oper_chan_mode> <last_membership_update> [ <last_membership_update_fail_reason> ] [ <pcm_interface_flag> ] [ <vlan_interfaces> ] [ <first_operational_port> ] [ <total_ports> ] [ <total_oper_ports> ] [ { TABLE_san_port_channel_member <port> <state> } ] } ] [ <cmd_error_str> ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

database

Show san-port-channel database

interface

(Optional) Specify a port-channel

ifid

(Optional)

all

(Optional) Display all port-channel

__readonly__

(Optional) Read Only

error_str

(Optional) Prints errors,if any

TABLE_san_port_channel_database

(Optional) san-port-channel database Table

interface

(Optional) san-po Interface

admin_chan_mode

(Optional) san-po administrative channel mode

oper_chan_mode

(Optional) san-po operational channel mode

last_membership_update

(Optional) Last membership update status

last_membership_update_fail_reason

(Optional) Membership update status casue

pcm_interface_flag

(Optional) san-po interface flag

vlan_interfaces

(Optional) san-po vlan interfaces

first_operational_port

(Optional) First oper port in san-po

total_ports

(Optional) Total number of ports in the san-po

total_oper_ports

(Optional) Total oper ports in the san-po

TABLE_san_port_channel_member

(Optional) san-po member Table

port

(Optional) san-po member port

state

(Optional) san-po member port state

cmd_error_str

(Optional) prints cmd errors,if any

Command Mode

- /exec

show san-port-channel summary

show san-port-channel summary [ __readonly__ [ { TABLE_san_port_channel_summary <interface> <total_ports> <total_oper_ports> <first_operational_port> } ] [ <cmd_error_str> ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

summary

Show san-port-channel summary

__readonly__

(Optional) Read Only

TABLE_san_port_channel_summary

(Optional) san-port-channel Summary Table

interface

(Optional) san-po Interface

total_ports

(Optional) Total number of ports in the san-po

total_oper_ports

(Optional) Total oper ports in the san-po

first_operational_port

(Optional) First oper port in san-po

cmd_error_str

(Optional) Prints cmd error,if any

Command Mode

- /exec

show san-port-channel usage

show san-port-channel usage [ __readonly__ [ <total_channel_numbers_used> { <used_range> } + { <unused_range> } + ] [ <error_str> ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

usage

Show san-port-channel usages

__readonly__

(Optional) Read Only

total_channel_numbers_used

(Optional) Total used number of port-channels

used_range

(Optional) Used range

unused_range

(Optional) Un-used range

error_str

(Optional) Prints error if any

Command Mode

- /exec

show scheduler config

show scheduler config [ __readonly__ [ <terminal> ] [ <feature> ] [ <logfilesize> ] [ <emailfrom> ] [ <emailreplyto> ] [ <smtpserver> ] [ <port> ] [ <usevrf> ] [ { TABLE_userconfig <username> [ <password> ] } ] [ { TABLE_jobconfig <jobdata> } ] [ { TABLE_scheduleconfig <schedulename> [ <scheduletype> ] [ { TABLE_jobs <status> } ] [ <email> ] } ] ]

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

config

Display scheduler config

__readonly__

(Optional)

terminal

(Optional) logfile terminal

feature

(Optional) name service

logfilesize

(Optional) logfilesize

emailfrom

(Optional) emailfrom

emailreplyto

(Optional) emailreplyto

smtpserver

(Optional) smtpserver

port

(Optional) port

usevrf

(Optional) usevrf

TABLE_userconfig

(Optional) userconfig

username

(Optional) username

password

(Optional) password

TABLE_jobconfig

(Optional) job configs

jobdata

(Optional) jobdata

TABLE_scheduleconfig

(Optional) schedule configs

schedulename

(Optional) schedulename

scheduletype

(Optional) scheduletype

TABLE_jobs

(Optional) jobs

status

(Optional) status

email

(Optional) email

Command Mode

- /exec

show scheduler job

show scheduler job [ name <s0> ] [ __readonly__ [ { TABLE_schedulerjobs <jobname> [ <jobdata> ] } ] ]

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

job

Display job information

name

(Optional) Specify the name of job

s0

(Optional) Specify the job name

__readonly__

(Optional)

TABLE_schedulerjobs

(Optional) schedulerjobs

jobname

(Optional) job name

jobdata

(Optional) job data

Command Mode

- /exec

show scheduler logfile

show scheduler logfile [ __readonly__ [ { TABLE_joblog <jobname> [ <jobstatus> ] [ <schedulename> ] [ <scheduleusername> ] [ <completiontime> ] [ <joboutput> ] } ] ]

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

logfile

Display scheduler job output log

__readonly__

(Optional)

TABLE_joblog

(Optional) jobs log

jobname

(Optional) job name

jobstatus

(Optional) job status

schedulename

(Optional) schedulename

scheduleusername

(Optional) scheduleusername

completiontime

(Optional) completiontime

joboutput

(Optional) joboutput

Command Mode

- /exec

show scheduler schedule

show scheduler schedule [ name <s0> ] [ __readonly__ [ { TABLE_schedules <schedulename> [ <scheduleusername> ] [ <scheduletype> ] [ <starttime> ] [ <lastexectime> ] [ <lastcompletiontime> ] [ <execcount> ] [ <jobcount> ] [ { TABLE_jobs <jobname> [ <execstatus> ] } ] } ] ]

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

schedule

Display schedule information

name

(Optional) Specify the name of schedule

s0

(Optional) Specify the schedule name

__readonly__

(Optional)

TABLE_schedules

(Optional) schedules

schedulename

(Optional) Schedule name

scheduleusername

(Optional) schedule username

scheduletype

(Optional) scheduletype

starttime

(Optional) starttime

lastexectime

(Optional) last exec time

lastcompletiontime

(Optional) lastcompletiontime

execcount

(Optional) execcount

jobcount

(Optional) jobcount

TABLE_jobs

(Optional) jobs

jobname

(Optional) jobname

execstatus

(Optional) execstatus

Command Mode

- /exec

show segment-routing

show segment-routing [ detail ] [ __readonly__ <srvname> <state> <process_id> [ <srgb_min_label> <srgb_max_label> <srgb_alloc_status> [ <oper_srgb_min_label> <oper_srgb_max_label> ] <cleanup_intvl> <retry_intvl> [ <num_retries> ] [ <srgb_alloc_hdl> ] [ <cleanup_timer_state> <retry_timer_state> ] ] [ <ulib_reg_status> [ <ulib_pib_hdl> ] ] ]

Syntax Description

show

Show running system information

segment-routing

Display segment-routing status info

detail

(Optional) Show detailed information

__readonly__

(Optional)

srvname

(Optional) Service name

state

(Optional) Process state

process_id

(Optional) Process id

srgb_min_label

(Optional) Configured SRGB min label

srgb_max_label

(Optional) Configured SRGB max label

srgb_alloc_status

(Optional) SRGB allocation status

oper_srgb_min_label

(Optional) Operational SRGB min label

oper_srgb_max_label

(Optional) Operational SRGB max label

cleanup_intvl

(Optional) SRGB cleanup interval

retry_intvl

(Optional) SRGB alloc retry interval

num_retries

(Optional) SRGB alloc retries done

srgb_alloc_hdl

(Optional) SRGB alloc handle

cleanup_timer_state

(Optional) SRGB cleanup timer state

retry_timer_state

(Optional) SRGB retry timer state

ulib_reg_status

(Optional) ULIB registation done

ulib_pib_hdl

(Optional) ULIB PIB handle

Command Mode

- /exec

show segment-routing clients

show segment-routing clients [ __readonly__ [ { TABLE_client <client_pib_name> <client_pib_index> <client_uuid> <client_pid> <client_sap> [ { TABLE_tib <vrf_name> <tib_name> [ <pfxsid_cleanup_status> ] } ] } ] <total_clients> ]

Syntax Description

show

Show running system information

segment-routing

Display segment-routing status info

clients

Display client info

__readonly__

(Optional)

TABLE_client

(Optional)

client_pib_name

(Optional) Client name

client_pib_index

(Optional) Client pib index

client_uuid

(Optional) Client UUID

client_pid

(Optional) Client PID

client_sap

(Optional) Client SAP

TABLE_tib

(Optional)

vrf_name

(Optional) VRF name

tib_name

(Optional) Table name

pfxsid_cleanup_status

(Optional) Prefixsid Cleanup Pending?

total_clients

(Optional) Total number of clients

Command Mode

- /exec

show segment-routing ipv4 connected-prefix-sid-map

show segment-routing ipv4 connected-prefix-sid-map [ __readonly__ [ { TABLE_tib <vrf_name> <tib_name> [ { TABLE_pfxsid <prefix> <index> <absolute> <range> <valid> } ] } ] ]

Syntax Description

show

Show running system information

segment-routing

Display segment-routing status info

ipv4

Display info for IPv4 address-family

connected-prefix-sid-map

Display prefix-sid mapping

__readonly__

(Optional)

TABLE_tib

(Optional)

vrf_name

(Optional) Vrf name

tib_name

(Optional) Table name

TABLE_pfxsid

(Optional)

prefix

(Optional) Prefix

index

(Optional) Segment ID

absolute

(Optional) Segment ID is absolute?

range

(Optional) Range of Segment IDs from index

valid

(Optional) Segment ID is valid?

Command Mode

- /exec

show sflow

show sflow [ __readonly__ <sampling-rate> <max-sampled-size> <counter-poll-interval> <max-datagram-size> <collector-ip> <collector-vrf> <source-ip> <collector-port> <agent-ip> <data-source-interface> ]

Syntax Description

show

Show running system information

sflow

Display sFlow global configuration

__readonly__

(Optional) Read only

sampling-rate

(Optional) Sampling Rate

max-sampled-size

(Optional) Max Sampled Size

counter-poll-interval

(Optional) Counter Poll Interval

max-datagram-size

(Optional) Max Datagram Size

collector-ip

(Optional) Collector IP

collector-vrf

(Optional) Collector VRF

source-ip

(Optional) Source IP

collector-port

(Optional) Collector Port

agent-ip

(Optional) Agent IP

data-source-interface

(Optional) Data Source Interface

Command Mode

- /exec

show sflow statistics

show sflow statistics [ __readonly__ <total-packets> <total-samples> <processed-samples> <dropped-samples> <rate-limiter-drops> <dropped-sflow-samples> <sent-datagrams> <dropped-datagrams> ]

Syntax Description

show

Show running system information

sflow

Display sFlow global configuration

statistics

Display sFlow statistics

__readonly__

(Optional) Read only

total-packets

(Optional) Total Packets

total-samples

(Optional) Total Samples

processed-samples

(Optional) Processed Samples

dropped-samples

(Optional) Dropped Samples

rate-limiter-drops

(Optional) Rate-Limiter Drops

dropped-sflow-samples

(Optional) Dropped sflow Samples

sent-datagrams

(Optional) Sent Datagrams

dropped-datagrams

(Optional) Dropped Datagrams

Command Mode

- /exec

show smart-channel

show smart-channel <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

show

Show running system information

smart-channel

smart channel

svc-name

smart channel name

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) probe type

dg_probe_port

(Optional) probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show snapshots

show snapshots [ __readonly__ TABLE_snapshot <snap_name> <snap_ctime> <description> ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

__readonly__

(Optional)

TABLE_snapshot

(Optional)

snap_name

(Optional) snapshot name

snap_ctime

(Optional) snapshot create time

description

(Optional) snapshot description

Command Mode

- /exec

show snapshots compare

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> [ __readonly__ TABLE_feature <feat_name> [ <feat_state1> <feat_state2> ] [ TABLE_element <elemkey1> <elemval1> [ <elemkey2> <elemval2> ] [ <elemkey3> <elemval3> ] [ <elemkey4> <elemval4> ] [ <elemstate1> <elemstate2> ] [ TABLE_value <tag> <val1> <val2> ] [ TABLE_subrow <subrowkey> <subrowval> [ <substate1> <substate2> ] [ TABLE_subvalue <tag> <val1> <val2> ] ] ] ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Compare two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

__readonly__

(Optional)

TABLE_feature

(Optional)

feat_name

(Optional) feature name

feat_state1

(Optional) feature state in snapshot1

feat_state2

(Optional) feature state in snapehot2

TABLE_element

(Optional)

elemkey1

(Optional) element key1

elemval1

(Optional) element value1

elemkey2

(Optional) element key2

elemval2

(Optional) element value2

elemkey3

(Optional) element key3

elemval3

(Optional) element value3

elemkey4

(Optional) element key4

elemval4

(Optional) element value4

elemstate1

(Optional) element state in snapshot 1

elemstate2

(Optional) element state in snapshot 2

TABLE_value

(Optional)

tag

(Optional) element tag

val1

(Optional) element value for tag in snapshot1

val2

(Optional) element value for tag in snapshot2

TABLE_subrow

(Optional)

subrowkey

(Optional) subrow key

subrowval

(Optional) subrow value

substate1

(Optional) subrow state in snapshot 1

substate2

(Optional) subrow state in snapshot 2

TABLE_subvalue

(Optional)

tag

(Optional) subrow tag

val1

(Optional) subrow value for tag in snapshot1

val2

(Optional) subrow value for tag in snapshot2

Command Mode

- /exec

show snapshots compare ipv4routes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv4routes [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] [ TABLE_prefix <prefix> <missing_snapshot> ] ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

ipv4routes

Compare ipv4 route information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

TABLE_prefix

(Optional)

prefix

(Optional) route prefix

missing_snapshot

(Optional) missing in snapshot name

Command Mode

- /exec

show snapshots compare ipv6routes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv6routes [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] [ TABLE_prefix <prefix> <missing_snapshot> ] ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

ipv6routes

Compare ipv6 route information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

TABLE_prefix

(Optional)

prefix

(Optional) route prefix

missing_snapshot

(Optional) missing in snapshot name

Command Mode

- /exec

show snapshots compare summary

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> summary [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

summary

Compare summary information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

Command Mode

- /exec

show snapshots dump

show snapshots dump <snapshot-name> <section-name> [ __readonly__ TABLE_snapshot <file_name> <snap_name> ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

dump

Dump contents of snapshot

snapshot-name

Name of a snapshot

section-name

Name of snapshot section

__readonly__

(Optional)

TABLE_snapshot

(Optional)

file_name

(Optional) snapshot XML file name

snap_name

(Optional) snapshot name

Command Mode

- /exec

show snapshots dump

show snapshots dump <snapshot-name> [ __readonly__ TABLE_snapshot <file_name> <snap_name> ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

dump

Dump contents of snapshot

snapshot-name

Name of a snapshot

__readonly__

(Optional)

TABLE_snapshot

(Optional)

file_name

(Optional) snapshot XML file name

snap_name

(Optional) snapshot name

Command Mode

- /exec

show snapshots sections

show snapshots sections [ __readonly__ TABLE_snapsection <sectname> <sectcmd> <sectrow> <sectkey1> <sectkey2> ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

sections

User-specified snapshot sections

__readonly__

(Optional)

TABLE_snapsection

(Optional)

sectname

(Optional) snapshot section name

sectcmd

(Optional) snapshot section show command

sectrow

(Optional) snapshot section row id

sectkey1

(Optional) snapshot section key1

sectkey2

(Optional) snapshot section key2

Command Mode

- /exec

show snmp-dhcp-relay drop statistics

show snmp-dhcp-relay drop statistics [ interface <intf> | ifindex <intf-in> ] [ __readonly__ { TABLE-cdrDropStatsTable <intf-out> <relay_disable> <invalid_msg_type> <intf_err> <tx_sock_err> <tx_fail_client_intf> <unknown_op_intf> <l3_unknown_op_intf> <max_hops> <opt82_fail> <malformed> <untrusted_relay_intf> <mct_drop> } ]

Syntax Description

show

Show running system information

snmp-dhcp-relay

DHCP Relay

drop

Statistics related to DHCP drop statistics

statistics

Statistics related to DHCP

interface

(Optional) input interface

intf

(Optional) interface

ifindex

(Optional) interface index value

__readonly__

(Optional) Read only

TABLE-cdrDropStatsTable

(Optional)

intf-in

(Optional) Interface Index

intf-out

(Optional) Table index

relay_disable

(Optional) relay was disabled

invalid_msg_type

(Optional) invalid message type

intf_err

(Optional) interface error

tx_sock_err

(Optional) failed to send at server

tx_fail_client_intf

(Optional) failed to send to client

unknown_op_intf

(Optional) unknown output interface

l3_unknown_op_intf

(Optional) unknown vrf or interface

max_hops

(Optional) max hops exceeded

opt82_fail

(Optional) Option82 validation failed

malformed

(Optional) malformed pkts

untrusted_relay_intf

(Optional) untrusted inteface

mct_drop

(Optional) dropped on MCT

Command Mode

- /exec

show snmp-dhcp-relay statistics pkt

show snmp-dhcp-relay statistics { [ interface <intf> | ifindex <intf-in> ] pkt-type <type-in> } [ __readonly__ { TABLE-cdrStatsTable <intf-out> <type-out> <rx_pkts> <tx_pkts> <drops> } ]

Syntax Description

show

Show running system information

snmp-dhcp-relay

DHCP Relay

statistics

Statistics related to DHCP

interface

(Optional) input interface

intf

(Optional) interface

ifindex

(Optional) Interface Index Value

pkt-type

DHCP Packet type

__readonly__

(Optional) Read only

TABLE-cdrStatsTable

(Optional)

intf-in

(Optional) table index - ifindex

intf-out

(Optional) table index

type-in

table index - packet type

type-out

(Optional) table index

rx_pkts

(Optional) received pkt count

tx_pkts

(Optional) transmitted pkt count

drops

(Optional) dropped pkt count

Command Mode

- /exec

show snmp-ipv6-dhcp-relay drop statistics

show snmp-ipv6-dhcp-relay drop statistics [ interface <intf> | ifindex <intf-in> ] [ __readonly__ { TABLE-cdrIpv6DropStatsTable <intf-out> <relay_disabled> <max_hops> <invalid_pkt> <unknown_op_intf> <invalid_vrf> <opt_insert_failed> <dir_reply_frm_server> <ipv6_not_configured> <intf_err> <vpn_option_disabled> <ipv6_ext_hdr_present> <mct_drop> } ]

Syntax Description

show

Show running system information

snmp-ipv6-dhcp-relay

IPv6 DHCP Relay

drop

Statistics related to IPv6 DHCP drop statistics

statistics

Statistics related to IPv6 DHCP

interface

(Optional) input interface

intf

(Optional) interface

ifindex

(Optional) interface index value

__readonly__

(Optional) Read only

TABLE-cdrIpv6DropStatsTable

(Optional)

intf-in

(Optional) Interface Index

intf-out

(Optional) Table index

relay_disabled

(Optional) DHCPv6 Relay is disabled

max_hops

(Optional) Max hops exceeded

invalid_pkt

(Optional) Packet validation failed

unknown_op_intf

(Optional) Unknown output interface

invalid_vrf

(Optional) Invalid VRF

opt_insert_failed

(Optional) Option Insertion Failed

dir_reply_frm_server

(Optional) Direct Replies (Recnfg/Adv/Reply) from server

ipv6_not_configured

(Optional) IPv6 addr not configured

intf_err

(Optional) Interface error

vpn_option_disabled

(Optional) VPN Option Disabled

ipv6_ext_hdr_present

(Optional) IPv6 extn headers present

mct_drop

(Optional) DHCP request dropped on MCT

Command Mode

- /exec

show snmp-ipv6-dhcp-relay statistics pkt

show snmp-ipv6-dhcp-relay statistics { [ interface <intf> | ifindex <intf-in> ] pkt-type <type-in> } [ __readonly__ { TABLE-cdrIpv6StatsTable <intf-out> <type-out> <rx_pkts> <tx_pkts> <drops> } ]

Syntax Description

show

Show running system information

snmp-ipv6-dhcp-relay

IPv6 DHCP Relay

statistics

Statistics related to IPv6 DHCP

interface

(Optional) input interface

intf

(Optional) interface

ifindex

(Optional) Interface Index Value

pkt-type

DHCP Packet type

__readonly__

(Optional) Read only

TABLE-cdrIpv6StatsTable

(Optional)

intf-in

(Optional) table index - ifindex

intf-out

(Optional) table index

type-in

table index - packet type

type-out

(Optional) table index

rx_pkts

(Optional) received pkt count

tx_pkts

(Optional) transmitted pkt count

drops

(Optional) dropped pkt count

Command Mode

- /exec

show snmp

show snmp [ __readonly__ <sys_contact> <sys_location> <snmp_input_packets> <bad_snmp_version> <unknown_community_name> <illegal_community_name> <encoding_Err> <req_var_nums> <alt_var_nums> <get_req_in> <getnext_req_in> <set_req_in> <noname_pdu_in> <badval_pdu_in> <ro_pdu_in> <genral_err_in> <get_resp_in> <unknown_ctx> <snmp_output_packets> <trap_pdu> <toobig_err> <noname_pdu_out> <badval_pdu_out> <genral_err_out> <get_req_out> <getnext_req_out> <set_req_out> <get_resp_out> <silent_drops> [ <max_pkt_size> ] [ { TABLE_snmp_community <community_name> <grouporaccess> <context> <aclfilter> } ] [ { TABLE_snmp_users <user> <auth> <priv> [ { TABLE_groups <group> } ] [ <acl_filter> ] [ <engineID> ] } ] <tcp_auth_status> [ <port_mon_status> [ <policy_name> <pol_admin_status> <plo_oper_status> <pol_port_type> [ TABLE_policies <counter> <threshold> <interval> <rising_threshold> <rising_event> <falling_threshold> <falling_event> <pmon_config> ] ] ] [ <protocol_status> ] [ { TABLE_snmp_contexts <context_name> <proto_instanceid> <vrf> <topology> [ <vlan> | <MST> ] } ] ]

Syntax Description

show

Show running system information

snmp

show snmp information

__readonly__

(Optional) Read Only

TABLE_snmp_community

(Optional) Table that displays the community information

TABLE_snmp_users

(Optional) Table that displays the user information

TABLE_groups

(Optional) Table that displays the group information

TABLE_policies

(Optional) Table that displays the policy information

TABLE_snmp_contexts

(Optional) Table that displays the context information

sys_contact

(Optional) System Contact

sys_location

(Optional) System Location

snmp_input_packets

(Optional) SNMP input packets

bad_snmp_version

(Optional) bad snmp version in Input SNMP packets

unknown_community_name

(Optional) unknown community name in Input SNMP packets

illegal_community_name

(Optional) Illegal community name in Input SNMP packets

encoding_Err

(Optional) Encoding Errors in Input SNMP packets

req_var_nums

(Optional) number of requested variables

alt_var_nums

(Optional) number of altered variable

get_req_in

(Optional) GET request in Input SNMP packets

getnext_req_in

(Optional) GET-NEXT request in Input SNMP packets

set_req_in

(Optional) SET request in Input SNMP packets

noname_pdu_in

(Optional) NONAME PDU in Input SNMP packets

badval_pdu_in

(Optional) Bad value PDU in Input SNMP packets

ro_pdu_in

(Optional) Read only PDU in Input SNMP packets

genral_err_in

(Optional) Genral Error in Input SNMP packets

get_resp_in

(Optional) Get Response PDU in Input SNMP packets

unknown_ctx

(Optional) Unknown context Name in Input SNMP packets

snmp_output_packets

(Optional) SNMP Output Packets

trap_pdu

(Optional) Trap PDU in Output SNMP Packets

toobig_err

(Optional) Too Big errors in Output SNMP Packets

noname_pdu_out

(Optional)

badval_pdu_out

(Optional) NoName PDU in Output SNMP Packets

genral_err_out

(Optional) Genral Error in Output SNMP Packets

get_req_out

(Optional) GET request in Output SNMP Packets

getnext_req_out

(Optional) GET-NEXTrequest in Output SNMP Packets

set_req_out

(Optional) SET request in Output SNMP packets

get_resp_out

(Optional) Get Response PDU in Output SNMP Packets

silent_drops

(Optional) Silent Drop packets

max_pkt_size

(Optional) Maximum packet size

community_name

(Optional) community name

grouporaccess

(Optional) Group name

context

(Optional) contaxt Name

aclfilter

(Optional) Acl filter name

user

(Optional) User name

auth

(Optional) Auth type

priv

(Optional) Priv Type

group

(Optional) Group name

acl_filter

(Optional) acl filter

engineID

(Optional) engine id for the user

tcp_auth_status

(Optional) TCP authentication status

port_mon_status

(Optional) Port monitor status

policy_name

(Optional) policy name

pol_admin_status

(Optional) Policy Admin status

plo_oper_status

(Optional) Police oper status

pol_port_type

(Optional) policy port type

counter

(Optional) counters

threshold

(Optional) Threshold

interval

(Optional) Interval

rising_threshold

(Optional) Rising threshold

rising_event

(Optional) Rising Event

falling_threshold

(Optional) Falling threshold

falling_event

(Optional) Falling Event

pmon_config

(Optional) PMON configured

protocol_status

(Optional) Protocol Enable status

context_name

(Optional) context name

proto_instanceid

(Optional) Protocol instance ID

vrf

(Optional) VRF Name

topology

(Optional) Topology

vlan

(Optional) VLAN name

MST

(Optional) MST name

Command Mode

- /exec

show snmp community

show snmp community [ __readonly__ { TABLE_snmp_community <community_name> <grouporaccess> <context> <aclfilter> } ]

Syntax Description

show

Show running system information

snmp

show snmp information

community

show snmp community strings

__readonly__

(Optional) Read Only

TABLE_snmp_community

(Optional) contains all snmp community names

community_name

(Optional) community name

grouporaccess

(Optional) group or access name

context

(Optional) context name

aclfilter

(Optional) acl filter name

Command Mode

- /exec

show snmp context

show snmp context [ __readonly__ { TABLE_snmp_contexts <context_name> <proto_instanceid> <vrf> <topology> [ <vlan> | <MST> ] } ]

Syntax Description

show

Show running system information

snmp

show snmp information

context

show snmp context mapping entries

__readonly__

(Optional)

TABLE_snmp_contexts

(Optional) All SNMP Contexts Entries

context_name

(Optional) SNMP context Name

proto_instanceid

(Optional) Name of the protocol instance

vrf

(Optional) VRF name

topology

(Optional) Name of the Topology

vlan

(Optional) VLAN Name

MST

(Optional)

Command Mode

- /exec

show snmp engineID

show snmp engineID [ __readonly__ <engineIDHex> <engineIDDec> ]

Syntax Description

show

Show running system information

snmp

show snmp information

engineID

show snmp engineID

__readonly__

(Optional)

engineIDHex

(Optional) SNMP engineID in HEX

engineIDDec

(Optional) SNMP engineID in Decimal

Command Mode

- /exec

show snmp group

show snmp group [ __readonly__ { TABLE_role <role_name> <role_description> [ <attribute_scope> ] [ <permit_vsan> ] [ <permit_vlan> ] [ <permit_vlan_id> ] [ <permit_interface> ] [ <permit_interface_slot> ] [ <permit_vrf> ] [ TABLE_vrf<permit_vrf_name> ] [ { TABLE_rule [ <rule_num> ] [ <rule_action> ] { <rule_permission> | <rule_permission_mds> } [ <rule_featuretype> ] [ <rule_entity> ] } ] } ]

Syntax Description

show

Show running system information

snmp

show snmp information

group

show snmp group

__readonly__

(Optional) Read Only

TABLE_role

(Optional) Table displays role

role_name

(Optional) Role Name

role_description

(Optional) Role Description

attribute_scope

(Optional) Role scope

permit_vsan

(Optional) permitted vsan

permit_vlan

(Optional)

permit_vlan_id

(Optional)

permit_interface

(Optional)

permit_interface_slot

(Optional)

permit_vrf

(Optional)

TABLE_rule

(Optional)

rule_num

(Optional)

rule_action

(Optional)

rule_permission

(Optional)

rule_permission_mds

(Optional)

rule_featuretype

(Optional)

rule_entity

(Optional)

Command Mode

- /exec

show snmp host

show snmp host [ __readonly__ { TABLE_host <host><port><version><level><type><secname> [ [ <vrf> ] [ TABLE_vrf_filters <vrf_filter> ] [ <src_intf> ] ] } ]

Syntax Description

show

Show running system information

snmp

show snmp information

host

show snmp hosts

__readonly__

(Optional) Read Only

TABLE_host

(Optional) displays the list of hosts configured for snmp requests

TABLE_vrf_filters

(Optional) displays the host vrf filters

vrf

(Optional) VRF Name

vrf_filter

(Optional) vrf filters

src_intf

(Optional) source interface

Command Mode

- /exec

show snmp mib igmpCacheTable

show snmp mib igmpCacheTable [ <igmpCacheAddress-in> ] [ <igmpCacheIfIndex-in> ] [ __readonly__ TABLE_igmpCacheTable <igmpCacheAddress-out> <igmpCacheIfIndex-out> <igmpCacheSelf> <igmpCacheLastReporter> <igmpCacheUpTime> <igmpCacheExpiryTime> <igmpCacheStatus> <igmpCacheVersion1HostTimer> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

igmpCacheTable

show mib table igmpCacheTable

igmpCacheAddress-in

(Optional) igmpCacheAddress

igmpCacheIfIndex-in

(Optional) igmpCacheIfIndex

__readonly__

(Optional)

TABLE_igmpCacheTable

(Optional)

igmpCacheAddress-out

(Optional) mib table index igmpCacheAddress

igmpCacheIfIndex-out

(Optional) mib table index igmpCacheIfIndex

igmpCacheSelf

(Optional) mib object igmpCacheSelf

igmpCacheLastReporter

(Optional) mib object igmpCacheLastReporter

igmpCacheUpTime

(Optional) mib object igmpCacheUpTime

igmpCacheExpiryTime

(Optional) mib object igmpCacheExpiryTime

igmpCacheStatus

(Optional) mib object igmpCacheStatus

igmpCacheVersion1HostTimer

(Optional) mib object igmpCacheVersion1HostTimer

Command Mode

- /exec

show snmp mib igmpInterfaceTable

show snmp mib igmpInterfaceTable [ <igmpInterfaceIfIndex-in> ] [ __readonly__ TABLE_igmpInterfaceTable <igmpInterfaceIfIndex-out> <igmpInterfaceQueryInterval> <igmpInterfaceStatus> <igmpInterfaceVersion> <igmpInterfaceQuerier> <igmpInterfaceQueryMaxResponseTime> <igmpInterfaceQuerierUpTime> <igmpInterfaceQuerierExpiryTime> <igmpInterfaceVersion1QuerierTimer> <igmpInterfaceWrongVersionQueries> <igmpInterfaceJoins> <igmpInterfaceProxyIfIndex> <igmpInterfaceGroups> <igmpInterfaceRobustness> <igmpInterfaceLastMembQueryIntvl> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

igmpInterfaceTable

show mib table igmpInterfaceTable

igmpInterfaceIfIndex-in

(Optional) igmpInterfaceIndex

__readonly__

(Optional)

TABLE_igmpInterfaceTable

(Optional)

igmpInterfaceIfIndex-out

(Optional) mib table index igmpInterfaceIfIndex

igmpInterfaceQueryInterval

(Optional) mib object igmpInterfaceQueryInterval

igmpInterfaceStatus

(Optional) mib object igmpInterfaceStatus

igmpInterfaceVersion

(Optional) mib object igmpInterfaceVersion

igmpInterfaceQuerier

(Optional) mib object igmpInterfaceQuerier

igmpInterfaceQueryMaxResponseTime

(Optional) mib object igmpInterfaceQueryMaxResponseTime

igmpInterfaceQuerierUpTime

(Optional) mib object igmpInterfaceQuerierUpTime

igmpInterfaceQuerierExpiryTime

(Optional) mib object igmpInterfaceQuerierExpiryTime

igmpInterfaceVersion1QuerierTimer

(Optional) mib object igmpInterfaceVersion1QuerierTimer

igmpInterfaceWrongVersionQueries

(Optional) mib object igmpInterfaceWrongVersionQueries

igmpInterfaceJoins

(Optional) mib object igmpInterfaceJoins

igmpInterfaceProxyIfIndex

(Optional) mib object igmpInterfaceProxyIfIndex

igmpInterfaceGroups

(Optional) mib object igmpInterfaceGroups

igmpInterfaceRobustness

(Optional) mib object igmpInterfaceRobustness

igmpInterfaceLastMembQueryIntvl

(Optional) mib object igmpInterfaceLastMembQueryIntvl

Command Mode

- /exec

show snmp mib pimCandidateRPTable

show snmp mib pimCandidateRPTable [ <pimCandidateRPGroupAddress-in> ] [ <pimCandidateRPGroupMask-in> ] [ __readonly__ TABLE_pimCandidateRPTable <pimCandidateRPGroupAddress-out> <pimCandidateRPGroupMask-out> <pimCandidateRPAddress> <pimCandidateRPRowStatus> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimCandidateRPTable

show mib table pimCandidateRPTable

pimCandidateRPGroupAddress-in

(Optional) pimCandidateRPGroupAddress

pimCandidateRPGroupMask-in

(Optional) pimCandidateRPGroupMask

__readonly__

(Optional)

TABLE_pimCandidateRPTable

(Optional)

pimCandidateRPGroupAddress-out

(Optional) mib table index pimCandidateRPGroupAddress

pimCandidateRPGroupMask-out

(Optional) mib table index pimCandidateRPGroupMask

pimCandidateRPAddress

(Optional) mib object pimCandidateRPAddress

pimCandidateRPRowStatus

(Optional) mib object pimCandidateRPRowStatus

Command Mode

- /exec

show snmp mib pimComponentTable

show snmp mib pimComponentTable [ <pimComponentIndex-in> ] [ __readonly__ TABLE_pimComponentTable <pimComponentIndex-out> <pimComponentBSRAddress> <pimComponentBSRExpiryTime> <pimComponentCRPHoldTime> <pimComponentStatus> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimComponentTable

show mib table pimComponentTable

pimComponentIndex-in

(Optional) pimComponentIndex

__readonly__

(Optional)

TABLE_pimComponentTable

(Optional)

pimComponentIndex-out

(Optional) mib table index pimComponentIndex

pimComponentBSRAddress

(Optional) mib object pimComponentBSRAddress

pimComponentBSRExpiryTime

(Optional) mib object pimComponentBSRExpiryTime

pimComponentCRPHoldTime

(Optional) mib object pimComponentCRPHoldTime

pimComponentStatus

(Optional) mib object pimComponentStatus

Command Mode

- /exec

show snmp mib pimInterfaceTable

show snmp mib pimInterfaceTable [ <pimInterfaceIfIndex-in> ] [ __readonly__ TABLE_pimInterfaceTable <pimInterfaceIfIndex-out> <pimInterfaceAddress> <pimInterfaceNetMask> <pimInterfaceMode> <pimInterfaceDR> <pimInterfaceHelloInterval> <pimInterfaceStatus> <pimInterfaceJoinPruneInterval> <pimInterfaceCBSRPreference> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimInterfaceTable

show mib table pimInterfaceTable

pimInterfaceIfIndex-in

(Optional) pimInterfaceIndex

__readonly__

(Optional)

TABLE_pimInterfaceTable

(Optional)

pimInterfaceIfIndex-out

(Optional) mib table index pimInterfaceIfIndex

pimInterfaceAddress

(Optional) mib object pimInterfaceAddress

pimInterfaceNetMask

(Optional) mib object pimInterfaceNetMask

pimInterfaceMode

(Optional) mib object pimInterfaceMode

pimInterfaceDR

(Optional) mib object pimInterfaceDR

pimInterfaceHelloInterval

(Optional) mib object pimInterfaceHelloInterval

pimInterfaceStatus

(Optional) mib object pimInterfaceStatus

pimInterfaceJoinPruneInterval

(Optional) mib object pimInterfaceJoinPruneInterval

pimInterfaceCBSRPreference

(Optional) mib object pimInterfaceCBSRPreference

Command Mode

- /exec

show snmp mib pimIpMRouteNextHopTable

show snmp mib pimIpMRouteNextHopTable [ <ipMRouteNextHopGroup-in> <ipMRouteNextHopSource-in> <ipMRouteNextHopSourceMask-in> <ipMRouteNextHopIfIndex-in> <ipMRouteNextHopAddress-in> ] [ __readonly__ TABLE_pimIpMRouteNextHopTable <ipMRouteNextHopGroup-out> <ipMRouteNextHopSource-out> <ipMRouteNextHopSourceMask-out> <ipMRouteNextHopIfIndex-out> <ipMRouteNextHopAddress-out> <pimIpMRouteNextHopPruneReason> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimIpMRouteNextHopTable

show mib table pimIpMRouteNextHopTable

ipMRouteNextHopGroup-in

(Optional) ipMRouteNextHopGroup

ipMRouteNextHopSource-in

(Optional) ipMRouteNextHopSource

ipMRouteNextHopSourceMask-in

(Optional) ipMRouteNextHopSourceMask

ipMRouteNextHopIfIndex-in

(Optional) ipMRouteNextHopIfIndex

ipMRouteNextHopAddress-in

(Optional) ipMRouteNextHopAddress

__readonly__

(Optional)

TABLE_pimIpMRouteNextHopTable

(Optional)

ipMRouteNextHopGroup-out

(Optional) mib table index ipMRouteNextHopGroup

ipMRouteNextHopSource-out

(Optional) mib table index pimComponentBSRAddress

ipMRouteNextHopSourceMask-out

(Optional) mib table index pimComponentBSRExpiryTime

ipMRouteNextHopIfIndex-out

(Optional) mib table index pimComponentCRPHoldTime

ipMRouteNextHopAddress-out

(Optional) mib table index pimComponentStatus

pimIpMRouteNextHopPruneReason

(Optional) mib object pimIpMRouteNextHopPruneReason

Command Mode

- /exec

show snmp mib pimIpMRouteTable

show snmp mib pimIpMRouteTable [ <ipMRouteGroup-in> ] [ <ipMRouteSource-in> ] [ <ipMRouteSourceMask-in> ] [ __readonly__ TABLE_pimIpMRouteTable <ipMRouteGroup-out> <ipMRouteSource-out> <ipMRouteSourceMask-out> <pimIpMRouteUpstreamAssertTimer> <pimIpMRouteAssertMetric> <pimIpMRouteAssertMetricPref> <pimIpMRouteAssertRPTBit> <pimIpMRouteFlags> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimIpMRouteTable

show mib table pimIpMRouteTable

ipMRouteGroup-in

(Optional) ipMRouteGroup

ipMRouteSource-in

(Optional) ipMRouteSource

ipMRouteSourceMask-in

(Optional) ipMRouteSourceMask

__readonly__

(Optional)

TABLE_pimIpMRouteTable

(Optional)

ipMRouteGroup-out

(Optional) mib table index ipMRouteGroup-out

ipMRouteSource-out

(Optional) mib table index ipMRouteSource-out

ipMRouteSourceMask-out

(Optional) mib table index ipMRouteSourceMask-out

pimIpMRouteUpstreamAssertTimer

(Optional) mib object pimIpMRouteUpstreamAssertTimer

pimIpMRouteAssertMetric

(Optional) mib object pimIpMRouteAssertMetric

pimIpMRouteAssertMetricPref

(Optional) mib object pimIpMRouteAssertMetricPref

pimIpMRouteAssertRPTBit

(Optional) mib object pimIpMRouteAssertRPTBit

pimIpMRouteFlags

(Optional) mib object pimIpMRouteFlags

Command Mode

- /exec

show snmp mib pimJoinPruneInterval

show snmp mib pimJoinPruneInterval [ __readonly__ <pimJoinPruneInterval> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimJoinPruneInterval

show mib scalar pimJoinPruneInterval

__readonly__

(Optional) Read Only

pimJoinPruneInterval

(Optional) mib object pimJoinPruneInterval

Command Mode

- /exec

show snmp mib pimNeighborTable

show snmp mib pimNeighborTable [ <pimNeighborAddress-in> ] [ __readonly__ TABLE_pimNeighborTable <pimNeighborAddress-out> <pimNeighborIfIndex> <pimNeighborUpTime> <pimNeighborExpiryTime> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimNeighborTable

show mib table pimNeighborTable

pimNeighborAddress-in

(Optional) pimNeighborAddress

__readonly__

(Optional)

TABLE_pimNeighborTable

(Optional)

pimNeighborAddress-out

(Optional) mib table index pimNeighborAddress

pimNeighborIfIndex

(Optional) mib object pimNeighborIfIndex

pimNeighborUpTime

(Optional) mib object pimNeighborUpTime

pimNeighborExpiryTime

(Optional) mib object pimNeighborExpiryTime

Command Mode

- /exec

show snmp mib pimRPSetTable

show snmp mib pimRPSetTable [ <pimRPSetComponent-in> ] [ <pimRPSetGroupAddress-in> ] [ <pimRPSetGroupMask-in> ] [ <pimRPSetAddress-in> ] [ __readonly__ TABLE_pimRPSetTable <pimRPSetGroupAddress-out> <pimRPSetGroupMask-out> <pimRPSetAddress-out> <pimRPSetHoldTime> <pimRPSetExpiryTime> <pimRPSetComponent-out> ]

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimRPSetTable

show mib table pimRPSetTable

pimRPSetComponent-in

(Optional) pimRPSetComponent

pimRPSetGroupAddress-in

(Optional) pimRPSetGroupAddress

pimRPSetGroupMask-in

(Optional) pimRPSetGroupMask

pimRPSetAddress-in

(Optional) pimRPSetAddress

__readonly__

(Optional)

TABLE_pimRPSetTable

(Optional)

pimRPSetGroupAddress-out

(Optional) mib table index pimRPSetGroupAddress

pimRPSetGroupMask-out

(Optional) mib table index pimRPSetGroupMask

pimRPSetAddress-out

(Optional) mib table index pimRPSetAddress

pimRPSetHoldTime

(Optional) mib object pimRPSetHoldTime

pimRPSetExpiryTime

(Optional) mib object pimRPSetExpiryTime

pimRPSetComponent-out

(Optional) mib table index pimRPSetComponent

Command Mode

- /exec

show snmp nms-statistics

show snmp nms-statistics [ __readonly__ <header> [ <nms_stats> ] ]

Syntax Description

show

Show running system information

snmp

Show snmp information

nms-statistics

Show SNMP NMS statistics

__readonly__

(Optional) Read Only

header

(Optional) NMS Statistics header

nms_stats

(Optional) NMS Statistics

Command Mode

- /exec

show snmp oid-statistics

show snmp oid-statistics [ last-access ] [ __readonly__ <header> { TABLE_snmp_gen <oid_stats> | TABLE_snmp_la <oid_last_access_stats> } ]

Syntax Description

show

Show running system information

snmp

Show snmp information

oid-statistics

Show SNMP oid statistics

last-access

(Optional) Show SNMP oid statistics of last-access

__readonly__

(Optional) Read Only

header

(Optional) OID Statistics header

TABLE_snmp_gen

(Optional) contains all snmp oid statistics

oid_stats

(Optional) OID Statistics

TABLE_snmp_la

(Optional) contains all snmp oid last access statistics

oid_last_access_stats

(Optional) OID Last Access Statistics

Command Mode

- /exec

show snmp pss

show snmp pss

Syntax Description

show

Show running system information

snmp

show snmp information

pss

show SNMP pss

Command Mode

- /exec

show snmp roledebug

show snmp roledebug

Syntax Description

show

Show running system information

snmp

show snmp information

roledebug

show SNMP roledebug

Command Mode

- /exec

show snmp sessions

show snmp sessions [ __readonly__ { TABLE_session <dest> } ]

Syntax Description

show

Show running system information

snmp

show snmp information

sessions

show snmp sessions

__readonly__

(Optional) Read Only

TABLE_session

(Optional) table displays destination

dest

(Optional) destination

Command Mode

- /exec

show snmp snmpv3stats

show snmp snmpv3stats

Syntax Description

show

Show running system information

snmp

show snmp information

snmpv3stats

show SNMP snmpdebug

Command Mode

- /exec

show snmp source-interface

show snmp source-interface [ __readonly__ { <trap_srcintf> <informs_srcintf> } ]

Syntax Description

show

Show running system information

snmp

show snmp information

source-interface

show source-interface through which notifications are sent

__readonly__

(Optional) Read Only

trap_srcintf

(Optional) Displays the source interface for traps

informs_srcintf

(Optional) Displays the source interface for informs

Command Mode

- /exec

show snmp trap

show snmp trap [ __readonly__ { TABLE_snmp_trap <trap_type><description><isEnabled> } ]

Syntax Description

show

Show running system information

snmp

show snmp information

trap

show snmp traps

__readonly__

(Optional) Read Only

TABLE_snmp_trap

(Optional) All snmp traps configured

Command Mode

- /exec

show snmp user

show snmp user [ <s0> [ engineID <s1> ] ] [ __readonly__ [ { TABLE_snmp_users <user> <auth> <priv> [ { TABLE_groups <group> } ] [ <acl_filter> ] [ <engineID> ] } ] ]

Syntax Description

show

Show running system information

snmp

show snmp information

user

show SNMPv3 users

s0

(Optional) Name of the user

engineID

(Optional) engineID

s1

(Optional) Target's SNMP engineID(colon separated) for SNMPv3 inform

__readonly__

(Optional) Read Only

TABLE_snmp_users

(Optional) table displays the snmp users

TABLE_groups

(Optional) table displays the gropus for specific user

user

(Optional) user name

auth

(Optional) auth type

priv

(Optional) priv type

group

(Optional) group belongs to

acl_filter

(Optional) acl filter

engineID

(Optional) engineID for specific user

Command Mode

- /exec

show sockets buffers

show sockets buffers [ { [ all <count> ] [ free <count> ] } ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

buffers

Display detailed buffer statistics

all

(Optional) Dump buffers from ALL list

free

(Optional) Dump buffers from FREE list

count

(Optional) Number of buffers to dump

Command Mode

- /exec

show sockets client

show sockets client { [ pid <pid> ] [ tcp | udp | raw ] [ detail ] [ kstack-ns-all ] } [ __readonly__ [ TABLE_total_clients [ <socket-type> <total-clients> ] [ <no-total-clients> ] ] [ TABLE_cl_sk { <prefix> <client-name> <pid> <No-of-clients> } [ <fast-tcp-mts-ctrl-q> ] [ { <cancel-requests> <cancel-unblocks> <cancel-misses> <select-drops> <select-wakes> } ] [ TABLE_det [ { <fd> <client-id> [ <mts-sap> ] } ] ] [ TABLE_st [ <soc-calls> ] [ <bind-calls> ] [ <listen-calls> ] [ <accept-calls> ] [ <acc-dispat-err> ] [ <connect-calls> ] [ <connec-dispatch> ] [ <recvmsg-dispatch> ] [ <recv-dis-nblock> ] [ <recvmsg-call> ] [ <brecv-dispatch> ] [ <fsendmsg-calls> ] [ <sendmsg-dispatch> ] [ <sendmsg-calls> ] [ <msendmsg-calls> ] [ <select-calls> ] [ <select-dispatch> ] [ <select-need-work> ] [ <sh-calls> ] [ <close-calls> ] [ <fcntl-calls> ] [ <ioctl-calls> ] [ <setsock-calls> ] [ <getsock-calls> ] [ <getsockname-calls> ] [ <getpeer-calls> ] [ <fork-calls> ] [ <execve-calls> ] [ <dup-calls> ] [ <can-calls> ] [ <can-miss> ] [ <can-unblk-sele> ] [ <soc-ha-calls> ] [ <pfork-client> ] [ <read-fd> ] [ <write-fd> ] [ <read-fd-set> ] [ <write-fd-set> ] [ <fast-tcp-send-req> ] [ <fast-tcp-send-suc> ] [ <fast-tcp-ack> ] ] [ TABLE_sterr [ <sock-err> ] [ <sock-nodev-err> ] [ <bind-err> ] [ <lis-err> ] [ <accept-err> ] [ <connect-err> ] [ <recvmsg-err> ] [ <brcvmsg-err> ] [ <fsendmsg-err> ] [ <sendmsg-err> ] [ <msndmsg-err> ] [ <select-err> ] [ <sel-nomem-err> ] [ <shut-err> ] [ <close-err> ] [ <fcntl-err> ] [ <ioctl-err> ] [ <setsoc-err> ] [ <getsoc-err> ] [ <getsocname-err> ] [ <getpeername-err> ] [ <fork-err> ] [ <execve-err> ] [ <dup-err> ] [ <psoc-vrf-err> ] [ <psoc-nosoc-err> ] [ <psoc-sock-null-err> ] [ <psoc-socre-err> ] [ <pbind-nsock-err> ] [ <pbd-getsocaddr> ] [ <pbind-sobind-err> ] [ <plisten-nsoc-err> ] [ <plis-solis-err> ] [ <pacc-nsoc-err> ] [ <pacc-no-nsoc-err> ] [ <pacc-soc-null-err> ] [ <pacc-copy-err> ] [ <pacc-no-acc-err> ] [ <pacc-woublo-err> ] [ <pacc-connabo-err> ] [ <pacc-cond-wait-err> ] [ <pacc-so-err-err> ] [ <pacc-err-err> ] [ <pcon-no-soc-err> ] [ <pcon-ealready-err> ] [ <pconn-getsock> ] [ <pconn-socon-err> ] [ <pconn-einpro-err> ] [ <pconn-con-wait-err> ] [ <psend-no-soc-err> ] [ <psend-inval-iov> ] [ <psend-getsoc-err> ] [ <psend-msg-ctrl-err> ] [ <psend-sockarg-err> ] [ <psend-pru-sosend> ] [ <precv-nosock-err> ] [ <precv-inval-iovlen> ] [ <precv-pru-sorecv> ] [ <precv-cp-msg-err> ] [ <precv-cp-msg-nlen> ] [ <precv-cp-data-err> ] [ <pbrecv-rcvmsg-err> ] [ <pshut-no-soc-err> ] [ <psetsoc-val-err> ] [ <psetsoc-inv-val> ] [ <psetsoc-no-soc-err> ] [ <psetsoc-sosetopt> ] [ <pgetsoc-no-socerr> ] [ <pgetsoc-cp-err> ] [ <pgetsoc-val-err> ] [ <pgetsoc-sogt-err> ] [ <pgtsoc-no-soc-err> ] [ <pgtsoc-cp-err> ] [ <pgtsoc-pru-soc-err> ] [ <pgtsoc-cpout-err> ] [ <pgtprne-no-soc-err> ] [ <pgtprne-enot-err> ] [ <pgtprne-cp-err> ] [ <pgtprne-pru-pradd> ] [ <pgtprne-cpout-err> ] [ <pclose-no-soc-err> ] [ <pclose-socnull-err> ] [ <pclose-p-cls2-err> ] [ <pfcntl-no-soc-err> ] [ <pfcntl-soc-null> ] [ <pfcntl-enotsup> ] [ <pfcntl-einval-err> ] [ <pioctl-no-soc-err> ] [ <pioctl-enotsup> ] [ <pioctl-pru-cntl> ] [ <pfork-enomem-err> ] [ <pdup-no-soc-err> ] [ <pudp-soc-null-err> ] [ <ha-nomem-err> ] [ <ha-tlv-err> ] [ <ha-soc-arg-err> ] [ <ha-cli-tlv-err> ] [ <ha-pss-upd-err> ] [ <ha-no-soc-err> ] [ <ha-soc-tlv-err> ] [ <ha-soc-pss-upd> ] [ <ha-inpcb-tlv> ] [ <ha-inpcb-pssky> ] [ <ha-ip-mopt-tlv> ] [ <ha-ip-mopt-pss> ] [ <ha-ip6-mopt-tlv> ] [ <ha-ip6-mopt-pss> ] [ <ha-tcpcb-tlv> ] [ <ha-tcpcb-pss> ] [ <ft-tcp-wblock> ] [ <ft-send-p-sndmsg> ] [ <ft-ack-rcv-no-soc> ] [ <lxc-tgid-err> ] ] [ TABLE_sp_cl [ <can-requests> <can-unblocks> <can-misses> <sel-drops> <sel-wakes> ] ] ] ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

client

Display sockets client information

pid

(Optional) Display specific client process information

pid

(Optional) Display client process <pid>

tcp

(Optional) Display TCP clients

udp

(Optional) Display UDP clients

raw

(Optional) Display RAW clients

detail

(Optional) Display socket details

kstack-ns-all

(Optional) Show kernel clients for all namespaces

__readonly__

(Optional)

TABLE_total_clients

(Optional) Total no of client sockets

socket-type

(Optional) Sockets type

total-clients

(Optional) total clients

no-total-clients

(Optional) number of total clients

TABLE_cl_sk

(Optional) Display Client sockets

prefix

(Optional) Prefix to the sockets

client-name

(Optional) Display socket client info

pid

(Optional) Display client process <pid>

No-of-clients

(Optional) Number of socket clients

fast-tcp-mts-ctrl-q

(Optional) Fast tcp mts control queue

cancel-requests

(Optional) cancel requests

cancel-unblocks

(Optional) cancel unblocks

cancel-misses

(Optional) cancel misses

select-drops

(Optional) select drops

select-wakes

(Optional) select wakes

TABLE_det

(Optional) Display Socket client Details

fd

(Optional) Client socket fd

client-id

(Optional) Client socket id

mts-sap

(Optional) socket mts addr sap

TABLE_st

(Optional) Sock detail Ctrl statistics

soc-calls

(Optional) sockets calls

bind-calls

(Optional) socket bind calls

listen-calls

(Optional) socket listen calls

accept-calls

(Optional) socket accept calls

acc-dispat-err

(Optional) socket accept dispatch error

connect-calls

(Optional) socket connect calls

connec-dispatch

(Optional) socket dispatch calls

recvmsg-dispatch

(Optional) receive msg dispatch

recv-dis-nblock

(Optional) receive dispatch nonblock

recvmsg-call

(Optional) receive message call

brecv-dispatch

(Optional) broadcast receive dispatch

fsendmsg-calls

(Optional) forward send message dispatch

sendmsg-dispatch

(Optional) send message dispatch

sendmsg-calls

(Optional) send message calls

msendmsg-calls

(Optional) multicast send message calls

select-calls

(Optional) select calls

select-dispatch

(Optional) select dispatch

select-need-work

(Optional) select need work

sh-calls

(Optional) show calls

close-calls

(Optional) close calls

fcntl-calls

(Optional) fcntl calls

ioctl-calls

(Optional) ioctl calls

setsock-calls

(Optional) setsock calls

getsock-calls

(Optional) getsock calls

getsockname-calls

(Optional) get socket name calls

getpeer-calls

(Optional) get peer calls

fork-calls

(Optional) fork calls

execve-calls

(Optional) execve calls

dup-calls

(Optional) duplicate calls

can-calls

(Optional) cancel calls

can-miss

(Optional) cancel miss

can-unblk-sele

(Optional) cancel unblock select

soc-ha-calls

(Optional) socket ha calls

pfork-client

(Optional) pfork client

read-fd

(Optional) socket read fd

write-fd

(Optional) socket write fd

read-fd-set

(Optional) socket read fd set

write-fd-set

(Optional) socket write fd set

fast-tcp-send-req

(Optional) socket fast tcp send request

fast-tcp-send-suc

(Optional) socket fast tcp send success

fast-tcp-ack

(Optional) socket fast tcp ack

TABLE_sterr

(Optional) Client Socket Error Statistics

sock-err

(Optional) socket error

sock-nodev-err

(Optional) socket nodev error

bind-err

(Optional) socket bind error

lis-err

(Optional) socket listen error

accept-err

(Optional) socket accept error

connect-err

(Optional) socket connect error

recvmsg-err

(Optional) socket receive message error

brcvmsg-err

(Optional) socket broadcast receive message error

fsendmsg-err

(Optional) socket forward send message error

sendmsg-err

(Optional) socket send message error

msndmsg-err

(Optional) socket multicast send message error

select-err

(Optional) socket select error

sel-nomem-err

(Optional) socket select no member error

shut-err

(Optional) socket shutdown error

close-err

(Optional) socket close error

fcntl-err

(Optional) socket fcntl error

ioctl-err

(Optional) socket ioctl error

setsoc-err

(Optional) set socket error

getsoc-err

(Optional) get socket error

getsocname-err

(Optional) get socket name error

getpeername-err

(Optional) get peer name error

fork-err

(Optional) socket fork error

execve-err

(Optional) socket execve error

dup-err

(Optional) socket duplicate error

psoc-vrf-err

(Optional) psocket vrf error

psoc-nosoc-err

(Optional) psocket nosoc error

psoc-sock-null-err

(Optional) psocket socket null error

psoc-socre-err

(Optional) psocket socre error

pbind-nsock-err

(Optional) pbind nsock error

pbd-getsocaddr

(Optional) pbd getsocaddr

pbind-sobind-err

(Optional) pbind sobind error

plisten-nsoc-err

(Optional) plisten nsoc error

plis-solis-err

(Optional) plisten socket listen error

pacc-nsoc-err

(Optional) paccept new socket error

pacc-no-nsoc-err

(Optional) paccept no new socket error

pacc-soc-null-err

(Optional) paccept socket null error

pacc-copy-err

(Optional) paccept copy error

pacc-no-acc-err

(Optional) paccept no accept error

pacc-woublo-err

(Optional) paccept would block error

pacc-connabo-err

(Optional) paccept connect abort error

pacc-cond-wait-err

(Optional) paccept condition wait error

pacc-so-err-err

(Optional) paccept socket error

pacc-err-err

(Optional) paccept error

pcon-no-soc-err

(Optional) pconnect no socket error

pcon-ealready-err

(Optional) pconnect ready error

pconn-getsock

(Optional) pconnect get socket

pconn-socon-err

(Optional) pconnect socket on error

pconn-einpro-err

(Optional) pconnect einprogress error

pconn-con-wait-err

(Optional) pconnect condition wait error

psend-no-soc-err

(Optional) psend no socket error

psend-inval-iov

(Optional) psend invalidate iov

psend-getsoc-err

(Optional) psend getsocket error

psend-msg-ctrl-err

(Optional) psend message control error

psend-sockarg-err

(Optional) psend socket argument error

psend-pru-sosend

(Optional) psend pru socket send

precv-nosock-err

(Optional) preceive no socket error

precv-inval-iovlen

(Optional) preceive invalidate iovlen

precv-pru-sorecv

(Optional) preceive pru so receive

precv-cp-msg-err

(Optional) preceive copy message error

precv-cp-msg-nlen

(Optional) preceive copy message new length

precv-cp-data-err

(Optional) preceive copy data error

pbrecv-rcvmsg-err

(Optional) preceive receive message error

pshut-no-soc-err

(Optional) pshutdown no socket error

psetsoc-val-err

(Optional) pset socket value error

psetsoc-inv-val

(Optional) pset socket invalidate error

psetsoc-no-soc-err

(Optional) pset socket no socket error

psetsoc-sosetopt

(Optional) pset socket set opt

pgetsoc-no-socerr

(Optional) pget socket no socket error

pgetsoc-cp-err

(Optional) pget socket copy error

pgetsoc-val-err

(Optional) pget socket validate error

pgetsoc-sogt-err

(Optional) pget socket sogt error

pgtsoc-no-soc-err

(Optional) pget socket no socket error

pgtsoc-cp-err

(Optional) pget socket copy error

pgtsoc-pru-soc-err

(Optional) pget socket pru socket error

pgtsoc-cpout-err

(Optional) pget socket copy out error

pgtprne-no-soc-err

(Optional) pget peer name no socket error

pgtprne-enot-err

(Optional) pget peer name enot connect error

pgtprne-cp-err

(Optional) pget peer name copy error

pgtprne-pru-pradd

(Optional) pget peer name pru peer address

pgtprne-cpout-err

(Optional) pget peer name copy out error

pclose-no-soc-err

(Optional) pclose no socket error

pclose-socnull-err

(Optional) pclose socket null error

pclose-p-cls2-err

(Optional) pclose p close2 error

pfcntl-no-soc-err

(Optional) pfcntl no socket error

pfcntl-soc-null

(Optional) pfcntl socket null

pfcntl-enotsup

(Optional) pfcntl enotsupport errors

pfcntl-einval-err

(Optional) pfcntl einvalidate error

pioctl-no-soc-err

(Optional) pioctl no socket error

pioctl-enotsup

(Optional) pioctl enotsup

pioctl-pru-cntl

(Optional) pioctl pru cntl

pfork-enomem-err

(Optional) pfork eno-memory error

pdup-no-soc-err

(Optional) pudp no socket error

pudp-soc-null-err

(Optional) pudp socket null error

ha-nomem-err

(Optional) ha no memory error

ha-tlv-err

(Optional) ha tlv error

ha-soc-arg-err

(Optional) ha socket argument error

ha-cli-tlv-err

(Optional) ha cli tlv error

ha-pss-upd-err

(Optional) ha pss udp error

ha-no-soc-err

(Optional) ha no socket error

ha-soc-tlv-err

(Optional) ha socket tlv error

ha-soc-pss-upd

(Optional) ha socket pss udp

ha-inpcb-tlv

(Optional) ha inpcb tlv value

ha-inpcb-pssky

(Optional) ha inpcb pssky value

ha-ip-mopt-tlv

(Optional) ha ip mopt tlv value

ha-ip-mopt-pss

(Optional) ha ip mopt pss value

ha-ip6-mopt-tlv

(Optional) ha ip6 mopt tlv value

ha-ip6-mopt-pss

(Optional) ha ip6 mopt pss value

ha-tcpcb-tlv

(Optional) ha socket update tcpcb to tlv error

ha-tcpcb-pss

(Optional) ha socket update tcpcb psskey update error

ft-tcp-wblock

(Optional) fast tcp send would block error

ft-send-p-sndmsg

(Optional) fast tcp send p_sendmsg errors

ft-ack-rcv-no-soc

(Optional) fast ack receive no socket

lxc-tgid-err

(Optional) Containers tgid err

TABLE_sp_cl

(Optional) Sock specific Ctrl statistics

can-requests

(Optional) socket control cancel request

can-unblocks

(Optional) socket cancel unblocks

can-misses

(Optional) socket cancel misses

sel-drops

(Optional) select drops

sel-wakes

(Optional) select wakes

Command Mode

- /exec

show sockets connection

show sockets connection [ pid <pid> | tcp | udp | raw ] [ local { <srcIP> | <srcIP6> } ] [ foreign { <dstIP> | <dstIP6> } ] [ detail ] [ keydetails ] [ __readonly__ [ { TABLE_sockets <protocol> [ <total-conn-count> ] [ { TABLE_conn <afi> <prot> [ <tcp-state> ] [ <rcv-count> ] [ <laddr> ] [ <lport> ] [ <faddr> ] [ <fport> ] [ <intf> ] [ <vrf-name> ] [ <snd-count> ] [ <type> ] [ <ttl> ] [ <tos> ] [ <options> ] [ <state> ] [ <iss> ] [ <snd-una> ] [ <snd-nxt> ] [ <snd_wnd> ] [ <irs> ] [ <rcv-nxt> ] [ <rcv-wnd> ] [ <snd-cwnd> ] [ <srtt> ] [ <rtt> ] [ <rttvar> ] [ <krtt> ] [ <rttmin> ] [ <mss> ] [ <dur> ] [ <flags> ] [ <md5-cnt> ] [ <md5-host> ] [ <md5-err> ] [ <rcv-hiwat> ] [ <rcv-lowat> ] [ <rcv-flags> ] [ <snd-hiwat> ] [ <snd-lowat> ] [ <snd-flags> ] [ <tcp-count> ] [ <udp-count> ] [ <raw-count> ] } ] } ] ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

connection

Display connection information

pid

(Optional) Display specific client process connection status

pid

(Optional) Display client process connection status <pid>

tcp

(Optional) Display all TCP connections

udp

(Optional) Display all UDP connections

raw

(Optional) Display all raw connections

local

(Optional) Display all TCP connections with specified local address

srcIP

(Optional) Display all TCP connections with specified local address

foreign

(Optional) Display all TCP connections with specified foreign address

dstIP

(Optional) Display all TCP connections with specified foreign address

detail

(Optional) Display detailed connection infomation

keydetails

(Optional) Display md5 key specific details

__readonly__

(Optional)

TABLE_sockets

(Optional) sockets table

protocol

(Optional) socket protocol

total-conn-count

(Optional) socket connection table

TABLE_conn

(Optional)

afi

(Optional) socket family

prot

(Optional) socket protocol

tcp-state

(Optional) socket tcp state

rcv-count

(Optional) socket connection receive count

laddr

(Optional) socket conenction laddr

lport

(Optional) socket connection lport

faddr

(Optional) socket connection faddr

fport

(Optional) socket connection fport

intf

(Optional) socket connection interface

vrf-name

(Optional) socket vrf name

snd-count

(Optional) socket connection send count

type

(Optional) socket connection type

ttl

(Optional) socket connection ttl

tos

(Optional) socket connection tos

options

(Optional) socket connection option

state

(Optional) socket connection state

iss

(Optional) socket connection iss

snd-una

(Optional) socket connection send unavailable

snd-nxt

(Optional) socket connection send next

snd_wnd

(Optional) socket connection send window

irs

(Optional) socket connection irs

rcv-nxt

(Optional) socket connection receive next

rcv-wnd

(Optional) socket connection receive window

snd-cwnd

(Optional) socket connection close sent window

srtt

(Optional) socket connection srtt

rtt

(Optional) socket connection rtt

rttvar

(Optional) socket connection rttvar

krtt

(Optional) socket connection krtt

rttmin

(Optional) socket connection rtt mintues

mss

(Optional) socket connection mss

dur

(Optional) socket connection duration

flags

(Optional) socket connection flags

md5-cnt

(Optional) socket connection md5 count

md5-host

(Optional) socket connection md5 host

md5-err

(Optional) socket connection md5 error

rcv-hiwat

(Optional) socket connection receive hiwat

rcv-lowat

(Optional) socket connection receive lowat

rcv-flags

(Optional) socket connection receive flags

snd-hiwat

(Optional) socket connection send hiwat

snd-lowat

(Optional) socket connection send lowat

snd-flags

(Optional) socket connection send flags

tcp-count

(Optional) socket connection tcp count

udp-count

(Optional) socket connection udp count

raw-count

(Optional) socket connection raw count

Command Mode

- /exec

show sockets keychain-dump

show sockets keychain-dump

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

keychain-dump

Dump the pss information for keychains

Command Mode

- /exec

show sockets local-port-range

show sockets local-port-range [ __readonly__ <kstack_local_port_range_start> <kstack_local_port_range_end> <netstack_local_port_range_start> <netstack_local_port_range_end> <nat_local_port_range_start> <nat_local_port_range_end> ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

local-port-range

Display local port range

__readonly__

(Optional)

kstack_local_port_range_start

(Optional) Kstack local port range start

kstack_local_port_range_end

(Optional) Kstack local port range end

netstack_local_port_range_start

(Optional) Netstack local port range start

netstack_local_port_range_end

(Optional) Netstack local port range end

nat_local_port_range_start

(Optional) Nat local port range start

nat_local_port_range_end

(Optional) Nat local port range end

Command Mode

- /exec

show sockets ns-port-kiosk

show sockets ns-port-kiosk

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

ns-port-kiosk

Display port kiosk for netstack socket clients

Command Mode

- /exec

show sockets performance

show sockets performance [ clear ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

performance

Display detailed perf statistics

clear

(Optional) Clear perf statistics

Command Mode

- /exec

show sockets secure-lxc

show sockets secure-lxc

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

secure-lxc

Display secure-container sockets information

Command Mode

- /exec

show sockets statistics

show sockets statistics [ all | tcp | tcp6 | tcpsum | udp | udp6 | udpsum | raw | raw6 | rawsum ] [ __readonly__ [ { TABLE_stat [ <rx-total> ] [ <rx-bad-csum> ] [ <rx-bad-offset> ] [ <rx-too-short> ] [ <rx-bad-md5> ] [ <rx-inseq-pack> ] [ <rx-inseq-bytes> ] [ <rx-dup-pack> ] [ <rx-dup-bytes> ] [ <rx-partdup-pack> ] [ <rx-partdup-bytes> ] [ <rx-oo-pack> ] [ <rx-oo-bytes> ] [ <rx-afterwin-pack> ] [ <rx-afterwin-bytes> ] [ <rx-afterclose-pack> ] [ <rx-winprobe-pack> ] [ <rx-winupdate-pack> ] [ <rx-dupack-pack> ] [ <rx-dupack-unsent-pack> ] [ <rx-ack-pack> ] [ <rx-ack-bytes> ] [ <rx-rcv-memdrop> ] [ <rx-dig-mssing> ] [ <rx-dig-unexpected> ] [ <rx-dig-notused> ] [ <rx-dig-valid> ] [ <rx-dig-invalid> ] [ <rx-get-passwd-fail> ] [ <rx-md5-mbuf-exded> ] [ <rx-uspec-src-recv> ] [ <rx-pkt-too-short> ] [ <rx-sin-finest> ] [ <rx-black-hole-syn> ] [ <rx-black-hole> ] [ <rx-drop-no-inpcb> ] [ <rx-drop-notcpcb> ] [ <rx-drp-sock-closed> ] [ <rx-syn-with-rst> ] [ <rx-syn-drop> ] [ <rx-bandlim> ] [ <rx-forged-pkt> ] [ <rx-drp-mbcast> ] [ <rx-drp-syn-add> ] [ <rx-drp-syn-recvd> ] [ <rx-drp-cc-sent> ] [ <rx-drp-rst-ccsent> ] [ <rx-frecv-enqueue> ] [ <rx-frecv-enqueue-fail> ] [ <rx-ftcp-cant-rcv-more> ] [ <rx-ftcp-data-ack-toapp-fail> ] [ <rx-ftcp-data-ack-toapp> ] [ <tx-total> ] [ <tx-urg> ] [ <tx-ctrl> ] [ <tx-data-pack> ] [ <tx-data-bytes> ] [ <tx-reasm-pack> ] [ <tx-reasm-bytes> ] [ <tx-ackonly-pack> ] [ <tx-winprobe-pack> ] [ <tx-winupdate-bytes> ] [ <tx-encrypt> ] [ <tx-unencrypt> ] [ <tx-md5rst> ] [ <tx-conn-init> ] [ <tx-conn-accepted> ] [ <tx-conn-estd> ] [ <closed> ] [ <dropped> ] [ <emb-dropped> ] [ <tx-rxmt-timeout> ] [ <tx-rxmt-timeout-dropped> ] [ <tx-ka-timeout> ] [ <tx-ka-probe> ] [ <tx-ka-drop> ] [ <gen-seg-timed> ] [ <gen-rtt-updated> ] [ <gen-delack> ] [ <gen-persist-timeout> ] [ <gen-paws-drop> ] [ <gen-predack> ] [ <gen-preddat> ] [ <gen-pcb-cachemiss> ] [ <gen-cache-drtt> ] [ <gen-cache-drttvar> ] [ <gen-cached-ssthresh> ] [ <gen-usedrtt> ] [ <gen-usedrttvar> ] [ <gen-usedssthresh> ] [ <gen-persistdrop> ] [ <gen-badsyn> ] [ <gen-mturesent> ] [ <gen-list-endrop> ] [ <gen-rpm-bind-synsock> ] [ <gen-rpm-bindsynadd> ] [ <gen-rpm-bindlookup> ] [ <gen-rpm-bindsetsock> ] [ <gen-rpm-unbind-getpass> ] [ <gen-rpm-unbinduser1> ] [ <gen-rpm-unbinduser2> ] [ <gen-rpm-unbindrollover> ] [ <gen-rpm-unbind-synfree> ] [ <gen-rpm-unbind-tpfree> ] [ <syn-sc-added> ] [ <syn-retransmitted> ] [ <syn-dupsyn> ] [ <syn-dropped> ] [ <syn-completed> ] [ <syn-bucket-overflow> ] [ <syn-cache-overflow> ] [ <syn-sc-reset> ] [ <syn-sc-stale> ] [ <syn-sc-aborted> ] [ <syn-sc-badack> ] [ <syn-sc-unreach> ] [ <syn-sc-zonefail> ] [ <syn-sc-sendcookie> ] [ <syn-sc-recvcookie> ] [ <syn-sc-crosshits> ] [ <syn-sc-supsyncrosshits> ] [ <syn-sc-removecrosshits> ] [ <udp-rx-total> ] [ <udp-rx-bad-csum> ] [ <udp-rx-no-csum> ] [ <udp-rx-too-short> ] [ <udp-rx-bad-len> ] [ <udp-rx-no-port> ] [ <udp-rx-no-port-bcast> ] [ <udp-rx-no-port-mcast> ] [ <udp-rx-full-socket-drop> ] [ <udp-tx-total> ] [ <raw-rx-version> ] [ <raw-rx-rcvd> ] [ <raw-rx-no-port> ] [ <raw-rx-full-socket-drop> ] [ <raw-tx-sent> ] [ <inpcb-tot-alloc> ] [ <inpcb-tot-bind> ] [ <inpcb-tot-laddr> ] [ <inpcb-tot-connect> ] [ <inpcb-tot-disconnect> ] [ <inpcb-tot-detach> ] [ <inpcb-tot-detach-noinc> ] [ <inpcb-tot-detach-rort> ] [ <inpcb-tot-rtfree> ] [ <inpcb-tot-setsock-addr> ] [ <inpcb-tot-setpeeraddr> ] [ <inpcb-tot-notify> ] [ <inpcb-tot-lookup-npacl-deny> ] [ <inpcb-tot-lookup-npacl-allow> ] [ <inpcb-tot-inshash-ipv4> ] [ <inpcb-tot-inshash-ipv6> ] [ <inpcb-tot-brehash-ipv4> ] [ <inpcb-tot-brehash-ipv6> ] [ <inpcb-tot-bremhash> ] [ <inpcb-err-allocnomem> ] [ <inpcb-err-bindeinavl> ] [ <inpcb-err-eaddrinuse> ] [ <inpcb-err-eagain> ] [ <inpcb-err-eagain2> ] [ <inpcb-err-eaddrnotavail> ] [ <inpcb-err-eafnosupport> ] [ <inpcb-err-enomem> ] [ <inpcb-err-ehostunreach> ] [ <inpcb-err-laddr-enxio> ] [ <inpcb-err-laddr-ehostunreach2> ] [ <inpcb-err-connectladdr> ] [ <inpcb-err-connect-eaddrinuse> ] [ <inpcb-err-connbind> ] [ <inpcb-err-sockaddrenomem> ] [ <inpcb-err-sockaddreconnreset> ] [ <inpcb-err-peeraddr-enomem> ] [ <inpcb-err-econnrest> ] [ <inpcb-err-respond-enobufs> ] [ <inpcb-err-binshash-enobufs> ] [ <in6pcb-tot-setport> ] [ <in6pcb-tot-bind> ] [ <in6pcb-tot-laddr> ] [ <in6pcb-tot-connect> ] [ <in6pcb-tot-disconnect> ] [ <in6pcb-tot-detach> ] [ <in6pcb-tot-sockaddr> ] [ <in6pcb-tot-peeraddr> ] [ <in6pcb-tot-notify> ] [ <in6pcb-tot-lookuplocal> ] [ <in6pcb-tot-hashnpacl-deny> ] [ <in6pcb-err-setporteagain> ] [ <in6pcb-err-setporteagain2> ] [ <in6pcb-err-seteagain3> ] [ <in6pcb-bind-eafnosupport> ] [ <in6pcb-err-bindeaddrinuse> ] [ <in6pcb-err-bindeaddrinuse2> ] [ <in6pcb-err-bindeaddrinuse3> ] [ <in6pcb-err-bindeaddrinuse4> ] [ <in6pcb-err-bindsetport> ] [ <in6pcb-err-bindeagain> ] [ <in6pcb-err-laddr-eafnosupport> ] [ <in6pcb-err-eaddrnotavail> ] [ <in6pcb-err-laddr-enomem> ] [ <in6pcb-err-laddr-ehostreach> ] [ <in6pcb-err-laddr-ehostunreach2> ] [ <in6pcb-err-laddr-ehostunreach3> ] [ <in6pcb-err-laddr-ehostunreach4> ] [ <in6pcb-err-laddr-enxio> ] [ <in6pcb-err-connladdr> ] [ <in6pcb-err-conneaddrinuse> ] [ <in6pcb-err-connbind> ] [ <in6pcb-err-sockaddr-enomem> ] [ <in6pcb-err-v4maps-enomem> ] [ <in6pcb-err-setsock-noinp> ] [ <in6pcb-err-setpeer-noinp> ] [ <in6pcb-err-sockaddr-noinp> ] [ <in6pcb-err-peeraddr-noinp> ] [ <in6pcb-err-notify-einavl> ] [ <in6pcb-err-ctloutput-nosoopt> ] } ] ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

statistics

Display sockets statistics

all

(Optional) Display TCP/UDP/RAW v4/v6 protocols statistics

tcp

(Optional) Display TCP v4 protocol statistics

tcp6

(Optional) Display TCP v6 protocol statistics

tcpsum

(Optional) Display sum of TCP v4 and TCP v6 protocols statistics

udp

(Optional) Display UDP v4 protocol statistics

udp6

(Optional) Display UDP v6 protocol statistics

udpsum

(Optional) Display sum of UDP v4 and UDP v6 protocols statistics

raw

(Optional) Display RAW v4 protocol statistics

raw6

(Optional) Display RAW v6 protocol statistics

rawsum

(Optional) Display sum of RAW v4 and RAW v6 protocols statistics

__readonly__

(Optional)

TABLE_stat

(Optional) sockets statistics table

rx-total

(Optional) total packets received

rx-bad-csum

(Optional) packets received with ccksum errs

rx-bad-offset

(Optional) packets received with bad offset

rx-too-short

(Optional) packets received too short

rx-bad-md5

(Optional) Recieved bad digest

rx-inseq-pack

(Optional) packets received in sequence

rx-inseq-bytes

(Optional) bytes received in sequence

rx-dup-pack

(Optional) duplicate-only packets received

rx-dup-bytes

(Optional) duplicate-only bytes received

rx-partdup-pack

(Optional) packets with some duplicate data

rx-partdup-bytes

(Optional) dup. bytes in part-dup. packets

rx-oo-pack

(Optional) out-of-order packets received

rx-oo-bytes

(Optional) out-of-order bytes received

rx-afterwin-pack

(Optional) packets with data after window

rx-afterwin-bytes

(Optional) bytes rcvd after window

rx-afterclose-pack

(Optional) packets rcvd after close

rx-winprobe-pack

(Optional) rcvd window probe packets

rx-winupdate-pack

(Optional) rcvd window update packets

rx-dupack-pack

(Optional) rcvd duplicate acks

rx-dupack-unsent-pack

(Optional) rcvd acks for unsent data

rx-ack-pack

(Optional) rcvd ack packets

rx-ack-bytes

(Optional) bytes acked by rcvd acks

rx-rcv-memdrop

(Optional) packets dropped for lack of memory

rx-dig-mssing

(Optional) digest missing

rx-dig-unexpected

(Optional) digest unexpected

rx-dig-notused

(Optional) digest not used

rx-dig-valid

(Optional) digest valid

rx-dig-invalid

(Optional) digest invalid

rx-get-passwd-fail

(Optional) get pass failed for RST

rx-md5-mbuf-exded

(Optional) md5 passwd exceeds mbuf

rx-uspec-src-recv

(Optional) Dropped Unspecified src pkt recieved

rx-pkt-too-short

(Optional) Dropped Packet too short

rx-sin-finest

(Optional) Dropped packet set with SYN/FIN

rx-black-hole-syn

(Optional) Dropped black hole SYN

rx-black-hole

(Optional) Dropped black hole

rx-drop-no-inpcb

(Optional) Dropped no inpcb

rx-drop-notcpcb

(Optional) Dropped no tcpcb

rx-drp-sock-closed

(Optional) Dropped socket closed

rx-syn-with-rst

(Optional) Dropped SYN with reset

rx-syn-drop

(Optional) Dropped SYN

rx-bandlim

(Optional) Dropped Bandlim rst open port

rx-forged-pkt

(Optional) Dropped Same src/dst

rx-drp-mbcast

(Optional) Dropped Broadcast/Multicast

rx-drp-syn-add

(Optional) Dropped Adding SYN failed

rx-drp-syn-recvd

(Optional) ACK recvd not for our SYN

rx-drp-cc-sent

(Optional) Dropped cc sent

rx-drp-rst-ccsent

(Optional) Dropped cc sent with reset

rx-frecv-enqueue

(Optional) Fast recv packets enqueued

rx-frecv-enqueue-fail

(Optional) Fast recv enqueue failed

rx-ftcp-cant-rcv-more

(Optional) Fast TCP can not recv more

rx-ftcp-data-ack-toapp-fail

(Optional) Fast TCP data ACK to app failed

rx-ftcp-data-ack-toapp

(Optional) Fast TCP data ACK to app

tx-total

(Optional) total packets sent

tx-urg

(Optional) packets sent with URG only

tx-ctrl

(Optional) control (SYN|FIN|RST) packets sent

tx-data-pack

(Optional) data packets sent

tx-data-bytes

(Optional) data bytes sent

tx-reasm-pack

(Optional) data packets retransmitted

tx-reasm-bytes

(Optional) data bytes retransmitted

tx-ackonly-pack

(Optional) ack-only packets sent

tx-winprobe-pack

(Optional) window probes sent

tx-winupdate-bytes

(Optional) window update-only packets sent

tx-encrypt

(Optional) Encrypted packets sent

tx-unencrypt

(Optional) Unencrypted packets sent

tx-md5rst

(Optional) No of encrypted RST packets

tx-conn-init

(Optional) connections initiated

tx-conn-accepted

(Optional) connections accepted

tx-conn-estd

(Optional) connections established

closed

(Optional) conn. closed (includes drops)

dropped

(Optional) connections dropped

emb-dropped

(Optional) embryonic connections dropped

tx-rxmt-timeout

(Optional) total rxmt timeout

tx-rxmt-timeout-dropped

(Optional) connections dropped in rxmt timeout

tx-ka-timeout

(Optional) keepalive timeouts

tx-ka-probe

(Optional) keepalive probes sent

tx-ka-drop

(Optional) connections dropped in keepalive

gen-seg-timed

(Optional) segs where we tried to get rtt

gen-rtt-updated

(Optional) times we succeeded to get rtt

gen-delack

(Optional) delayed acks sent

gen-persist-timeout

(Optional) persist timeouts

gen-paws-drop

(Optional) segments dropped due to PAWS

gen-predack

(Optional) hdr predict ok for acks

gen-preddat

(Optional) hdr predict ok for data pkts

gen-pcb-cachemiss

(Optional) PCB cache miss

gen-cache-drtt

(Optional) times cached RTT in route updated

gen-cache-drttvar

(Optional) times cached rttvar updated

gen-cached-ssthresh

(Optional) times cached ssthresh updated

gen-usedrtt

(Optional) times RTT initialized from route

gen-usedrttvar

(Optional) times RTTVAR initialized from rt

gen-usedssthresh

(Optional) times ssthresh initialized from rt

gen-persistdrop

(Optional) timeout in persist state

gen-badsyn

(Optional) bogus SYN, e.g. premature ACK

gen-mturesent

(Optional) resends due to MTU discovery

gen-list-endrop

(Optional) listen queue overflows

gen-rpm-bind-synsock

(Optional) rpm bind in synsock

gen-rpm-bindsynadd

(Optional) rpm bind in synadd

gen-rpm-bindlookup

(Optional) rpm bind in lookup

gen-rpm-bindsetsock

(Optional) rpm bind in setsock

gen-rpm-unbind-getpass

(Optional) rpm unbind get pass

gen-rpm-unbinduser1

(Optional) rpm unbind by user

gen-rpm-unbinduser2

(Optional) rpm unbind by user1

gen-rpm-unbindrollover

(Optional) rpm unbind during rollover

gen-rpm-unbind-synfree

(Optional) rpm unbind in syn free

gen-rpm-unbind-tpfree

(Optional) rpm unbind in tp free

syn-sc-added

(Optional) entry added to syncache

syn-retransmitted

(Optional) syncache entry was retransmitted

syn-dupsyn

(Optional) duplicate SYN packet

syn-dropped

(Optional) could not reply to packet

syn-completed

(Optional) successful extraction of entry

syn-bucket-overflow

(Optional) syncache per-bucket limit hit

syn-cache-overflow

(Optional) syncache cache limit hit

syn-sc-reset

(Optional) RST removed entry from syncache

syn-sc-stale

(Optional) timed out or listen socket gone

syn-sc-aborted

(Optional) syncache entry aborted

syn-sc-badack

(Optional) removed due to bad ACK

syn-sc-unreach

(Optional) ICMP unreachable received

syn-sc-zonefail

(Optional) zalloc() failed

syn-sc-sendcookie

(Optional) SYN cookie sent

syn-sc-recvcookie

(Optional) SYN cookie received

syn-sc-crosshits

(Optional) crosshits on the SC blocks

syn-sc-supsyncrosshits

(Optional) crosshits dup SYN on SC block

syn-sc-removecrosshits

(Optional) crosshits on SC blocks to remove

udp-rx-total

(Optional) total udp packets

udp-rx-bad-csum

(Optional) udp checksum error

udp-rx-no-csum

(Optional) udp no checksum

udp-rx-too-short

(Optional) udp packets drops

udp-rx-bad-len

(Optional) udp bad length

udp-rx-no-port

(Optional) udp no port

udp-rx-no-port-bcast

(Optional) udp no port broadcast

udp-rx-no-port-mcast

(Optional) udp no port multicast

udp-rx-full-socket-drop

(Optional) udp dropped full socket

udp-tx-total

(Optional) udp total packets

raw-rx-version

(Optional) raw sockets version

raw-rx-rcvd

(Optional) raw sockets connection received

raw-rx-no-port

(Optional) raw socket no port

raw-rx-full-socket-drop

(Optional) raw socket full sockets drop

raw-tx-sent

(Optional) raw socket connection sent

inpcb-tot-alloc

(Optional) inpcb allocation

inpcb-tot-bind

(Optional) inpcb bind

inpcb-tot-laddr

(Optional) inpcb laddr

inpcb-tot-connect

(Optional) inpcb connect

inpcb-tot-disconnect

(Optional) inpcb disconnect

inpcb-tot-detach

(Optional) inpcb detach

inpcb-tot-detach-noinc

(Optional) inpcb detaach no increment

inpcb-tot-detach-rort

(Optional) inpcb detach no return

inpcb-tot-rtfree

(Optional) inpcb rt free

inpcb-tot-setsock-addr

(Optional) inpcb set socket address

inpcb-tot-setpeeraddr

(Optional) inpcb set peer address

inpcb-tot-notify

(Optional) inpcb notify

inpcb-tot-lookup-npacl-deny

(Optional) inpcb lookup hash npacl deny

inpcb-tot-lookup-npacl-allow

(Optional) inpcb lookup npacl allow

inpcb-tot-inshash-ipv4

(Optional) inpcb inshash ipv4

inpcb-tot-inshash-ipv6

(Optional) inpcb inshash ipv6

inpcb-tot-brehash-ipv4

(Optional) inpcb brehash ipv4

inpcb-tot-brehash-ipv6

(Optional) inpcb brehash ipv6

inpcb-tot-bremhash

(Optional) inpcb brehash

inpcb-err-allocnomem

(Optional) inpcb allocation no memory error

inpcb-err-bindeinavl

(Optional) inpcb bind einval error

inpcb-err-eaddrinuse

(Optional) inpcb eaddr in use error

inpcb-err-eagain

(Optional) inpcb eagain error

inpcb-err-eagain2

(Optional) inpcb eagain2 error

inpcb-err-eaddrnotavail

(Optional) inpcb eaddr not availableerror

inpcb-err-eafnosupport

(Optional) inpcb eaf no support error

inpcb-err-enomem

(Optional) inpcb no-memory error

inpcb-err-ehostunreach

(Optional) inpcb ehost unreachable error

inpcb-err-laddr-enxio

(Optional) inpcb laddr enxio error

inpcb-err-laddr-ehostunreach2

(Optional) inpcb laddr ehost unreachable2 error

inpcb-err-connectladdr

(Optional) inpcb connect laddr error

inpcb-err-connect-eaddrinuse

(Optional) inpcb connect eaddress in use error

inpcb-err-connbind

(Optional) inpcb connect bind error

inpcb-err-sockaddrenomem

(Optional) inpcb socket address no memory error

inpcb-err-sockaddreconnreset

(Optional) inpcb socket address econnect reset error

inpcb-err-peeraddr-enomem

(Optional) inpcb peer address no memory error

inpcb-err-econnrest

(Optional) inpcb connection rest error

inpcb-err-respond-enobufs

(Optional) inpcb respond no buffer error

inpcb-err-binshash-enobufs

(Optional) inpcb binshash no buffer error

in6pcb-tot-setport

(Optional) in6pcb set port error

in6pcb-tot-bind

(Optional) in6pcb bind

in6pcb-tot-laddr

(Optional) in6pcb laddr

in6pcb-tot-connect

(Optional) in6pcb connect

in6pcb-tot-disconnect

(Optional) in6pcb disconnect

in6pcb-tot-detach

(Optional) in6pcb detach

in6pcb-tot-sockaddr

(Optional) in6pcb socket address

in6pcb-tot-peeraddr

(Optional) in6pcb peer address

in6pcb-tot-notify

(Optional) in6pcb notify

in6pcb-tot-lookuplocal

(Optional) in6pcb lookup local

in6pcb-tot-hashnpacl-deny

(Optional) in6pcb hash npacl deny

in6pcb-err-setporteagain

(Optional) in6pcb set port again error

in6pcb-err-setporteagain2

(Optional) in6pcb set port again2 error

in6pcb-err-seteagain3

(Optional) in6pcb set port again3 error

in6pcb-bind-eafnosupport

(Optional) in6pcb bind eaf no support error

in6pcb-err-bindeaddrinuse

(Optional) in6pcb bind address in use error

in6pcb-err-bindeaddrinuse2

(Optional) in6pcb bind address in use2 error

in6pcb-err-bindeaddrinuse3

(Optional) in6pcb bind address in use3 error

in6pcb-err-bindeaddrinuse4

(Optional) in6pcb bind address in use4 error

in6pcb-err-bindsetport

(Optional) in6pcb bind setport error

in6pcb-err-bindeagain

(Optional) in6pcb bind again error

in6pcb-err-laddr-eafnosupport

(Optional) in6pcb laddr eaf no support error

in6pcb-err-eaddrnotavail

(Optional) in6pcb address not available error

in6pcb-err-laddr-enomem

(Optional) in6pcb laddr no memory error

in6pcb-err-laddr-ehostreach

(Optional) in6pcb laddr host reach error

in6pcb-err-laddr-ehostunreach2

(Optional) in6pcb laddr host reach2 error

in6pcb-err-laddr-ehostunreach3

(Optional) in6pcb laddr host reach3 error

in6pcb-err-laddr-ehostunreach4

(Optional) in6pcb laddr host reach4 error

in6pcb-err-laddr-enxio

(Optional) in6pcb laddr enxio error

in6pcb-err-connladdr

(Optional) in6pcb connect laddr error

in6pcb-err-conneaddrinuse

(Optional) in6pcb connect eaddress in use error

in6pcb-err-connbind

(Optional) in6pcb connect bind error

in6pcb-err-sockaddr-enomem

(Optional) in6pcb socket address no memory error

in6pcb-err-v4maps-enomem

(Optional) in6pcb v4maps no memory error

in6pcb-err-setsock-noinp

(Optional) in6pcb set socket noinp error

in6pcb-err-setpeer-noinp

(Optional) in6pcb set peer noinp error

in6pcb-err-sockaddr-noinp

(Optional) in6pcb socket address noinp error

in6pcb-err-peeraddr-noinp

(Optional) in6pcb peer address noinp error

in6pcb-err-notify-einavl

(Optional) in6pcb notify eingress available error

in6pcb-err-ctloutput-nosoopt

(Optional) in6pcb control output no socket opt error

Command Mode

- /exec

show sockets tcp keychain binding

show sockets tcp keychain binding [ __readonly__ { TABLE_keychain <keychain> <handle> <ref_count> } ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

tcp

TCP information

keychain

Keychain information

binding

Binding information reagarding RPM

__readonly__

(Optional)

TABLE_keychain

(Optional) all sockets tcp keychains

keychain

(Optional) xml keychain information

handle

(Optional) xml handle information

ref_count

(Optional) xml refcount information

Command Mode

- /exec

show spanning-tree

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> TABLE_port <if_index> [ <vpc> ] <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] { <verbosity> | active } + [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

verbosity

verbosity

active

Report on active interfaces only

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

port_count

(Optional) Number of Ports in Tree

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_active

(Optional) Spanning Tree State

root_path_cost

(Optional) Root Path Cost

root_port_if_index

(Optional) Root Port

root_port_priority

(Optional) Root Port Priority

root_port_number

(Optional) Root Port Number

topology_change

(Optional) Topology Change flag is set ?

topology_change_detected

(Optional) Topology Change detected flag is set ?

topology_change_count

(Optional) Topology Change Count

topology_change_time_since_last

(Optional) Time since last TC

tc_initiator_if_index

(Optional) Topology Change initiator port

max_age

(Optional) Max Age

hello_time

(Optional) Hello Time

forward_delay

(Optional) Forward delay

bridge_max_age

(Optional) Configured Bridge Max Age

bridge_hello_time

(Optional) Configured Hello Time

bridge_forward_delay

(Optional) Configured Forward Delay

hold_time

(Optional) Configured Hold Time

hello_timer

(Optional) Hello Timer Value

topology_change_timer

(Optional) Topology Change Timer Value

tcn_timer

(Optional) TCN Timer Value

aging_timer

(Optional) Ageing Timer Value

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

TABLE_port

(Optional)

if_index

(Optional) Interface

vpc

(Optional) STP Port memebr of MCT/VPC PO

port_info_tree_id

(Optional) Tree Id

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_protocol

(Optional) Tree Protocol

port_tree_type

(Optional) Tree Type

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

boundary

(Optional) Is port boundary ?

prestd

(Optional) Is port Pre STD MST ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

oper_networkport

(Optional) Is network port enabled ?

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

- /exec

show spanning-tree blockedports

{ show spanning-tree [ vlan <vlan-id> ] blockedports [ __readonly__ [ TABLE_tree [ <port_info_tree_id> ] [ TABLE_port [ <if_index> ] ] ] [ <tree_type> ] [ <num_ports> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

__readonly__

(Optional)

TABLE_tree

(Optional)

port_info_tree_id

(Optional) Tree name

TABLE_port

(Optional)

if_index

(Optional) Port name

tree_type

(Optional) Tree Type

num_ports

(Optional) Number of Ports

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

blockedports

Show blocked ports

Command Mode

- /exec

show spanning-tree bridge

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ priority [ system-id ] ] [ __readonly__ { TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <bridge_mac> <bridge_priority> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> } ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ { detail | brief } ] [ __readonly__ { TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <bridge_mac> <bridge_priority> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> } ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ { address | forward-time | hello-time | id | max-age | protocol } ] [ __readonly__ { TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <bridge_mac> <bridge_priority> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> } ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

bridge

Status and configuration of this bridge

address

(Optional) Mac address of this bridge

forward-time

(Optional) Forward delay interval

hello-time

(Optional) Hello time

id

(Optional) Spanning tree bridge identifier

max-age

(Optional) Max age

protocol

(Optional) Spanning tree protocol

brief

(Optional) Brief summary of the status and configuration output

detail

(Optional) Detailed of the status and configuration

priority

(Optional) Bridge priority of this bridge

system-id

(Optional) Spanning tree priority with system id extension

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

bridge_forward_delay

(Optional) Configured Forward Delay

bridge_max_age

(Optional) Configured Bridge Max Age

bridge_hello_time

(Optional) Configured Hello Time

Command Mode

- /exec

show spanning-tree inconsistentports

{ show spanning-tree [ vlan <vlan-id> ] inconsistentports [ __readonly__ [ TABLE_tree <port_info_tree_id> <if_index> <inconsistency> ] [ <tree_type> ] [ <num_ports> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

inconsistentports

Show inconsistent ports

__readonly__

(Optional)

TABLE_tree

(Optional)

port_info_tree_id

(Optional) Tree name

if_index

(Optional) Port name

inconsistency

(Optional) Inconsistency type

tree_type

(Optional) Tree Type

num_ports

(Optional) Number of Ports

Command Mode

- /exec

show spanning-tree interface

{ show spanning-tree [ vlan <vlan-id> ] interface <interface-id> { cost | inconsistency | edge | priority | rootcost | state } [ __readonly__ [ TABLE_vlan_interface_info <tree_name> [ <cost> ] [ <edge> ] [ <inconsistency> ] [ <priority> ] [ <rootcost> ] [ <state> ] ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

interface

Spanning Tree interface status and configuration

interface-id

cost

Port path cost

inconsistency

Port inconsistency state

edge

Edge Port configuration

priority

Port priority

rootcost

Path cost to root

state

Port spanning tree state

__readonly__

(Optional)

TABLE_vlan_interface_info

(Optional)

tree_name

(Optional) Spanning tree name

cost

(Optional) Path cost

edge

(Optional) Portfast enabled or not

inconsistency

(Optional) Port inconsistency

priority

(Optional) Port Priority

rootcost

(Optional) Designated Cost

state

(Optional) Port state

Command Mode

- /exec

show spanning-tree interface

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id> [ __readonly__ { TABLE_port <if_index> [ <vpc> ] <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> <oper_networkport> <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] } ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id> { <verbosity> | active } + [ __readonly__ { TABLE_port <if_index> [ <vpc> ] <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> <oper_networkport> <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] } ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

interface

Spanning Tree interface status and configuration

interface-id

verbosity

verbosity

active

Report on active instances only

__readonly__

(Optional) Read Only

TABLE_port

(Optional)

if_index

(Optional) Interface

vpc

(Optional) STP Port memebr of MCT/VPC PO

port_info_tree_id

(Optional) Tree Id

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_protocol

(Optional) Tree Protocol

port_tree_type

(Optional) Tree Type

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

boundary

(Optional) Is port boundary ?

prestd

(Optional) Is port Pre STD MST ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

oper_networkport

(Optional) Is network port enabled ?

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

- /exec

show spanning-tree issu-impact

show spanning-tree issu-impact [ __readonly__ [ TABLE_topology <tc_detected> <tc_name> <no_of_tc> <time> <tc_string> ] [ TABLE_BA_ports <port_name> ] [ <criteria1> ] [ <criteria2> ] [ TABLE_non_edge_ports <port> <vlan> <role> <sts> <tree> <instance> ] [ <criteria3> ] ]

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

issu-impact

Show whether STP meets ISSU criteria

__readonly__

(Optional)

TABLE_topology

(Optional)

tc_detected

(Optional)

tc_name

(Optional)

no_of_tc

(Optional)

time

(Optional)

tc_string

(Optional)

TABLE_BA_ports

(Optional)

port_name

(Optional)

TABLE_non_edge_ports

(Optional)

port

(Optional)

vlan

(Optional)

role

(Optional)

sts

(Optional)

tree

(Optional)

instance

(Optional)

criteria1

(Optional)

criteria2

(Optional)

criteria3

(Optional)

Command Mode

- /exec

show spanning-tree mst

{ show spanning-tree mst [ <mst-id> ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <ist-master-id-mac> <ist-master-prio> <ist-path-cost> <remaining-hops> <max-hops> <txholdcount> <tree-vlan-map> TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> <boundary> [ <simulate_pvst_cfg> ] <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ] } | { show spanning-tree mst [ <mst-id> ] detail [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <ist-master-id-mac> <ist-master-prio> <ist-path-cost> <remaining-hops> <max-hops> <txholdcount> <tree-vlan-map> TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> <boundary> [ <simulate_pvst_cfg> ] <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

mst-id

(Optional) MST instance range, example: 0-3,5,7-9

detail

Detailed information

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

port_count

(Optional) Number of Ports in Tree

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_active

(Optional) Spanning Tree State

root_path_cost

(Optional) Root Path Cost

root_port_if_index

(Optional) Root Port

root_port_priority

(Optional) Root Port Priority

root_port_number

(Optional) Root Port Number

topology_change

(Optional) Topology Change flag is set ?

topology_change_detected

(Optional) Topology Change detected flag is set ?

topology_change_count

(Optional) Topology Change Count

topology_change_time_since_last

(Optional) Time since last TC

tc_initiator_if_index

(Optional) Topology Change initiator port

max_age

(Optional) Max Age

hello_time

(Optional) Hello Time

forward_delay

(Optional) Forward delay

bridge_max_age

(Optional) Configured Bridge Max Age

bridge_hello_time

(Optional) Configured Hello Time

bridge_forward_delay

(Optional) Configured Forward Delay

hold_time

(Optional) Configured Hold Time

hello_timer

(Optional) Hello Timer Value

topology_change_timer

(Optional) Topology Change Timer Value

tcn_timer

(Optional) TCN Timer Value

aging_timer

(Optional) Ageing Timer Value

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

ist-master-id-mac

(Optional) IST Master ID MAC address

ist-master-prio

(Optional) IST Master ID priority

ist-path-cost

(Optional) IST path cost

remaining-hops

(Optional) Remaining hops

max-hops

(Optional) Max Hops

txholdcount

(Optional) TX Hold count

tree-vlan-map

(Optional) Bitmap of vlans mapped to tree

TABLE_port

(Optional)

if_index

(Optional) Interface

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_info_tree_id

(Optional) Tree Id

port_tree_type

(Optional) Tree Type

port_protocol

(Optional) Tree Protocol

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

boundary

(Optional) Is port boundary ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

prestd

(Optional) Is port Pre STD MST ?

designated_ist_master

(Optional) Ist master mac

designated_ist_master_priority

(Optional) Ist master priority

designated_ist_cost

(Optional) Ist master path cost

vlan-map

(Optional) Bitmap of vlans mapped to port

oper_networkport

(Optional) Is network port enabled ?

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

- /exec

show spanning-tree mst configuration

{ show spanning-tree mst configuration [ __readonly__ <stp-mode> <name> <rev-id> { TABLE_instance_to_vlan_map <mst_id> <vlan_bit_map> } [ <pvlan-sync> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

configuration

MST current region configuration

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

name

(Optional) Configuration name

rev-id

(Optional) Configuration revision number

TABLE_instance_to_vlan_map

(Optional) Instance to vlan mapping Info

mst_id

(Optional) MST Instance ID

vlan_bit_map

(Optional) VLAN Bitmap

pvlan-sync

(Optional) pvlan synchronization

Command Mode

- /exec

show spanning-tree mst configuration digest

{ show spanning-tree mst configuration digest [ __readonly__ <stp-mode> <name> <rev-id> <digest> <prestd-digest> [ <pvlan-sync> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

configuration

MST current region configuration

digest

Display MST configuration digest

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

name

(Optional) Configuration name

rev-id

(Optional) Configuration revision number

digest

(Optional) MST region configuration digest

prestd-digest

(Optional) MST region configuration pre-std digest

pvlan-sync

(Optional) pvlan synchronization

Command Mode

- /exec

show spanning-tree mst interface

{ show spanning-tree mst [ <mst-id> ] interface <interface-id> [ __readonly__ TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> [ <pvstsim_inc_timer> ] <boundary> [ <simulate_pvst_cfg> ] <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ] } | { show spanning-tree mst [ <mst-id> ] interface <interface-id> detail [ __readonly__ TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> [ <pvstsim_inc_timer> ] <boundary> [ <simulate_pvst_cfg> ] <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

mst-id

(Optional) MST instance range, example: 0-3,5,7-9

interface

Spanning Tree interface status and configuration

interface-id

Specify an interface as a target for the command

detail

Detailed information

__readonly__

(Optional) Read Only

TABLE_port

(Optional)

if_index

(Optional) Interface

port_info_tree_id

(Optional) Tree Id

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_tree_type

(Optional) Tree Type

port_protocol

(Optional) Tree Protocol

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

boundary

(Optional) Is port boundary ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

dispute

(Optional) Is port Disputed ?

prestd

(Optional) Is port Pre STD MST ?

designated_ist_master

(Optional) Ist master mac

designated_ist_master_priority

(Optional) Ist master priority

designated_ist_cost

(Optional) Ist master path cost

vlan-map

(Optional) Bitmap of vlans mapped to port

oper_networkport

(Optional) Is network port enabled ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

- /exec

show spanning-tree pathcost method

{ show spanning-tree pathcost method [ __readonly__ <stp-pathcost-method> [ <stp-operpathcost-method> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

pathcost

Show Spanning pathcost options

method

Default pathcost calculation method

__readonly__

(Optional)

stp-pathcost-method

(Optional) STP Pathcost Method

stp-operpathcost-method

(Optional) STP Pathcost Method

Command Mode

- /exec

show spanning-tree root

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ priority [ system-id ] ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <tree_designated_root> <tree_designated_root_priority> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <max_age> <hello_time> <forward_delay> ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ { address | cost | forward-time | hello-time | id | max-age | port } ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <tree_designated_root> <tree_designated_root_priority> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <max_age> <hello_time> <forward_delay> ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ { detail | brief } ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <tree_designated_root> <tree_designated_root_priority> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <max_age> <hello_time> <forward_delay> ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

root

Status and configuration of the root bridge

address

(Optional) Mac address of this bridge

cost

(Optional) Path cost from this bridge to the root

forward-time

(Optional) Forward delay interval

hello-time

(Optional) Hello time

id

(Optional) Spanning tree bridge identifier

max-age

(Optional) Max age

port

(Optional) Root port

brief

(Optional) Brief summary of interface information

detail

(Optional) Detailed information

priority

(Optional) Bridge priority of this bridge

system-id

(Optional) Spanning tree priority with system id extension

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

root_path_cost

(Optional) Root Path Cost

root_port_if_index

(Optional) Root Port

root_port_priority

(Optional) Root Port Priority

root_port_number

(Optional) Root Port Number

max_age

(Optional) Max Age

hello_time

(Optional) Hello Time

forward_delay

(Optional) Forward delay

Command Mode

- /exec

show spanning-tree summary

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] summary [ __readonly__ <stp-mode> [ <stp_tree_root_info> <tree_type> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> ] + [ <stp_root_bmp_info> <stp_root_tree_type> <tree_root_bmp> <stp_l2gstp_bmp_info> <stp_l2gstp_tree_type> [ <stp_l2gstp_bmp> ] ] <stp_global_info> <pcost_method> <oper_pcost_method> <port_fast> <bpdu_guard> <bpdu_filter> <oper_loopguard> <bridge_assurance> <networkport_default> <simulate_pvst> <max-hops> <peer_switch_cfg> <oper_peer_switch> <stp_l2gstp_domain_id> <stp_lite> [ TABLE_tree <stp_tree_summary> <summary_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> ] [ <stp_summary_totals> <total_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> ] ]

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

summary

Summary of port states

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

stp_tree_root_info

(Optional) STP Tree Root info marker

tree_type

(Optional) Tree Type

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_root_bmp_info

(Optional) STP root bitmap info marker

stp_root_tree_type

(Optional) Tree Type

tree_root_bmp

(Optional) STP tree root bmp

stp_l2gstp_bmp_info

(Optional) L2 Gateway STP bitmap marker

stp_l2gstp_tree_type

(Optional) Tree Type

stp_l2gstp_bmp

(Optional) L2 Gateway STP bitmap

stp_global_info

(Optional) STP global info marker

pcost_method

(Optional) STP pathcost method

oper_pcost_method

(Optional) STP oper pathcost method

port_fast

(Optional) Port Fast configured on port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_loopguard

(Optional) Is loopguard enabled ?

bridge_assurance

(Optional) Bridge Assurance

networkport_default

(Optional) Network Port default

simulate_pvst

(Optional) Is port is pvst simulate mode ?

max-hops

(Optional) Max Hops

peer_switch_cfg

(Optional) peer switch configuration status

oper_peer_switch

(Optional) peer switch operational status

stp_l2gstp_domain_id

(Optional) L2 Gateway STP Domain ID

stp_lite

(Optional) STP-Lite

TABLE_tree

(Optional)

stp_tree_summary

(Optional) STP Tree Summary

summary_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

stp_summary_totals

(Optional) Total num STP trees

total_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

Command Mode

- /exec

show spanning-tree summary totals

show spanning-tree summary totals [ __readonly__ <stp-mode> <stp_tree_root_info> <tree_type> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_root_bmp_info> <stp_root_tree_type> <tree_root_bmp> <stp_l2gstp_bmp_info> <stp_l2gstp_tree_type> <stp_l2gstp_bmp> <stp_global_info> <pcost_method> <oper_pcost_method> <port_fast> <bpdu_guard> <bpdu_filter> <oper_loopguard> <bridge_assurance> <networkport_default> <simulate_pvst> <max-hops> <peer_switch_cfg> <oper_peer_switch> <stp_l2gstp_domain_id> <stp_lite> <stp_summary_totals> <total_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> ]

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

summary

Summary of port states

totals

Only show totals

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

stp_tree_root_info

(Optional) STP Tree Root info marker

tree_type

(Optional) Tree Type

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_root_bmp_info

(Optional) STP root bitmap info marker

stp_root_tree_type

(Optional) Tree Type

tree_root_bmp

(Optional) STP tree root bmp

stp_l2gstp_bmp_info

(Optional) L2 Gateway STP bitmap marker

stp_l2gstp_tree_type

(Optional) Tree Type

stp_l2gstp_bmp

(Optional) L2 Gateway STP bitmap

stp_global_info

(Optional) STP global info marker

pcost_method

(Optional) STP pathcost method

oper_pcost_method

(Optional) STP oper pathcost method

port_fast

(Optional) Port Fast configured on port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_loopguard

(Optional) Is loopguard enabled ?

bridge_assurance

(Optional) Bridge Assurance

networkport_default

(Optional) Network Port default

simulate_pvst

(Optional) Is port is pvst simulate mode ?

max-hops

(Optional) Max Hops

peer_switch_cfg

(Optional) peer switch configuration status

oper_peer_switch

(Optional) peer switch operational status

stp_l2gstp_domain_id

(Optional) L2 Gateway STP Domain ID

stp_lite

(Optional) STP-Lite

stp_summary_totals

(Optional) Total num STP trees

total_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

Command Mode

- /exec

show sprom

show sprom { backplane <i0> | module <module> <i1> | xbar <santa-cruz-range> <i2> | powersupply <i3> | fan <i4> | sup | stby-sup | all | all2 | backplane2 | module2 <module2> | powersupply2 <i5> | sup2 } [ __readonly__ [ cmn_block { <blk_sig_cb> <blk_ver_cb> <blk_length_cb> <blk_checksum_cb> <eeprom_size> <blk_count> <fru_major_type> <fru_minor_type> <oem_string> <prd_num> <serial_num> <part_num> <part_rev> <mfg_dev> <hw_rev> <mfg_bits> <eng_use> <snmp_oid> <power_consump> <rma_code> <clei_code> <vid> } ] [ sup_specific_block { <blk_sig_ssb> <blk_ver_ssb> <blk_length_ssb> <blk_checksum_ssb> <feature_bits> <hw_changes_bits> <card_index> <mac_addresses> <no_of_macs> <no_of_epld> [ TABLE_epld_ssb <epld_name_ssb> <epld_ver_ssb> ] <port_type_num> { TABLE_sensor_ssb <sensor_num_ssb> <maj_thres_ssb> <min_thres_ssb> } <max_connector_power> <cooling_reqt> <amb_temp> } ] [ lc_specific_block { <blk_sig_lc> <blk_ver_lc> <blk_length_lc> <blk_checksum_lc> <feature_bits> <hw_changes_bits> <card_index> <mac_addresses> <no_of_macs> <no_of_epld> [ TABLE_epld_lc <epld_name_lc> <epld_ver_lc> ] <port_type_num> { TABLE_sensor_lc <sensor_num_lc> <maj_thres_lc> <min_thres_lc> } <max_connector_power> <cooling_reqt> <amb_temp> } ] [ ps_specific_block { <blk_sig_psb> <blk_ver_psb> <blk_length_psb> <blk_checksum_psb> <feature_bits> <current_110v> <current_220v> <stackmib_oid> } ] [ fan_specific_block { <blk_sig_fsb> <blk_ver_fsb> <blk_length_fsb> <blk_checksum_fsb> <feature_bits> <hw_change_bits> <stackmib_oid> <cooling_capacity> <amb_temp> } ] [ ch_specific_block { <blk_sig_csb> <blk_ver_csb> <blk_length_csb> <blk_checksum_csb> <feature_bits> <hw_changes_bits> <stackmib_oid> <mac_addresses> <no_of_macs> <oem_enterprise> <oem_mib_offset> <max_connector_power> } ] [ temp_sensor_block { <blk_sig_tsb> <blk_ver_tsb> <blk_length_tsb> <blk_checksum_tsb> <no_of_sensors> { TABLE_sensor_tsb <sensor_num_tsb> <maj_thres_tsb> <min_thres_tsb> } } ] [ wwn_specific_block { <blk_sig_wwnb> <blk_ver_wwnb> <blk_length_wwnb> <blk_checksum_wwnb> { TABLE_wwn_usage_wsb <wwn_usage_bits> } } ] [ lic_specific_block { <blk_sig_licb> <blk_ver_licb> <blk_length_licb> <blk_checksum_licb> { TABLE_lic_usage_lsb <lic_usage_bits> } } ] [ second_serial_block { <blk_sig_sn2b> <blk_ver_sn2b> <blk_length_sn2b> <blk_checksum_sn2b> <serial_num_sn2b> } ] [ psu_common_block { <format_version> <internal_info_offset> <chassis_info_offset> <board_info_offset> <product_info_offset> <multirecord_info_offset> <checksum> } ] [ psu_board_info_block { <format_version> <length> <language_code> <mfg_date> <mfg_type> <mfg_info> <name_type> <product_name> <snum_type> <snum> <part_type> <partnum> <fruid_type> <fruid> <bom_hw_pid_info> <partnum_rev> <fab_revision> <vid> <clei_len> <clei> <eof_marker> <csum> } ] [ psu_product_info_block { <format_version> <length> <language_code> <mfg_type> <mfg_info> <name_type> <product_name> <part_type> <partnum> <product_ver_type> <sw_certification> <snum_type> <snum> <asset_type> <asset_string> <fruid_type> <fruid> <partnumrev> <vid> <eof_marker> <csum> } ] [ psu_record_info_block { <record_type> <record_info> <record_len> <record_csum> <header_csum> <record_identifier> <format_ver> <standby_pwr_budget> <psu_class> <psu_watts> } ] ]

Syntax Description

show

Show running system information

sprom

show SPROM contents

backplane

show backplane clock module sprom contents

i0

please enter instance of backplane sprom

module

show linecard module sprom contents

module

please enter module number

i1

please enter instance of module sprom

xbar

show xbar fabric sprom contents

santa-cruz-range

please enter the xbar number

i2

please enter sprom instance number

powersupply

show powersupply sprom contents

i3

please enter powersupply number

fan

show fan module sprom contents

i4

please enter fan number

sup

show supervisor sprom contents

stby-sup

show standby supervisor sprom contents

all

show all sproms contents

all2

All sprom contents

backplane2

Backplane sprom contents

module2

Linecard sprom contents

module2

Linecard module number

powersupply2

Powersupply sprom contents

i5

Powersupply module number

sup2

Supervisor sprom contents

__readonly__

(Optional)

cmn_block

(Optional)

blk_sig_cb

(Optional)

blk_ver_cb

(Optional)

blk_length_cb

(Optional)

blk_checksum_cb

(Optional)

eeprom_size

(Optional)

blk_count

(Optional)

fru_major_type

(Optional)

fru_minor_type

(Optional)

oem_string

(Optional)

prd_num

(Optional)

serial_num

(Optional)

part_num

(Optional)

part_rev

(Optional)

mfg_dev

(Optional)

hw_rev

(Optional)

mfg_bits

(Optional)

eng_use

(Optional)

snmp_oid

(Optional)

power_consump

(Optional)

rma_code

(Optional)

clei_code

(Optional)

vid

(Optional)

ch_specific_block

(Optional)

blk_sig_csb

(Optional)

blk_ver_csb

(Optional)

blk_length_csb

(Optional)

blk_checksum_csb

(Optional)

feature_bits

(Optional)

hw_changes_bits

(Optional)

stackmib_oid

(Optional)

mac_addresses

(Optional)

no_of_macs

(Optional)

oem_enterprise

(Optional)

oem_mib_offset

(Optional)

max_connector_power

(Optional)

sup_specific_block

(Optional)

blk_sig_ssb

(Optional)

blk_ver_ssb

(Optional)

blk_length_ssb

(Optional)

blk_checksum_ssb

(Optional)

feature_bits

(Optional)

hw_changes_bits

(Optional)

card_index

(Optional)

mac_addresses

(Optional)

no_of_macs

(Optional)

no_of_epld

(Optional)

TABLE_epld_ssb

(Optional)

epld_name_ssb

(Optional)

epld_ver_ssb

(Optional)

port_type_num

(Optional)

TABLE_sensor_ssb

(Optional)

sensor_num_ssb

(Optional)

maj_thres_ssb

(Optional)

min_thres_ssb

(Optional)

max_connector_power

(Optional)

cooling_reqt

(Optional)

amb_temp

(Optional)

lc_specific_block

(Optional)

blk_sig_lc

(Optional)

blk_ver_lc

(Optional)

blk_length_lc

(Optional)

blk_checksum_lc

(Optional)

feature_bits

(Optional)

hw_changes_bits

(Optional)

card_index

(Optional)

mac_addresses

(Optional)

no_of_macs

(Optional)

no_of_epld

(Optional)

TABLE_epld_lc

(Optional)

epld_name_lc

(Optional)

epld_ver_lc

(Optional)

port_type_num

(Optional)

TABLE_sensor_lc

(Optional)

sensor_num_lc

(Optional)

maj_thres_lc

(Optional)

min_thres_lc

(Optional)

max_connector_power

(Optional)

cooling_reqt

(Optional)

amb_temp

(Optional)

ps_specific_block

(Optional)

blk_sig_psb

(Optional)

blk_ver_psb

(Optional)

blk_length_psb

(Optional)

blk_checksum_psb

(Optional)

feature_bits

(Optional)

current_110v

(Optional)

current_220v

(Optional)

stackmib_oid

(Optional)

fan_specific_block

(Optional)

blk_sig_fsb

(Optional)

blk_ver_fsb

(Optional)

blk_length_fsb

(Optional)

blk_checksum_fsb

(Optional)

feature_bits

(Optional)

hw_change_bits

(Optional)

stackmib_oid

(Optional)

cooling_capacity

(Optional)

amb_temp

(Optional)

temp_sensor_block

(Optional)

blk_sig_tsb

(Optional)

blk_ver_tsb

(Optional)

blk_length_tsb

(Optional)

blk_checksum_tsb

(Optional)

no_of_sensors

(Optional)

TABLE_sensor_tsb

(Optional)

sensor_num_tsb

(Optional)

maj_thres_tsb

(Optional)

min_thres_tsb

(Optional)

wwn_specific_block

(Optional)

blk_sig_wwnb

(Optional)

blk_ver_wwnb

(Optional)

blk_length_wwnb

(Optional)

blk_checksum_wwnb

(Optional)

TABLE_wwn_usage_wsb

(Optional)

wwn_usage_bits

(Optional)

lic_specific_block

(Optional)

blk_sig_licb

(Optional)

blk_ver_licb

(Optional)

blk_length_licb

(Optional)

blk_checksum_licb

(Optional)

TABLE_lic_usage_lsb

(Optional)

lic_usage_bits

(Optional)

second_serial_block

(Optional)

blk_sig_sn2b

(Optional)

blk_ver_sn2b

(Optional)

blk_length_sn2b

(Optional)

blk_checksum_sn2b

(Optional)

serial_num_sn2b

(Optional)

psu_common_block

(Optional)

format_version

(Optional)

internal_info_offset

(Optional)

chassis_info_offset

(Optional)

board_info_offset

(Optional)

product_info_offset

(Optional)

multirecord_info_offset

(Optional)

checksum

(Optional)

psu_board_info_block

(Optional)

format_version

(Optional)

length

(Optional)

language_code

(Optional)

mfg_date

(Optional)

mfg_type

(Optional)

mfg_info

(Optional)

name_type

(Optional)

product_name

(Optional)

snum_type

(Optional)

snum

(Optional)

part_type

(Optional)

partnum

(Optional)

fruid_type

(Optional)

fruid

(Optional)

bom_hw_pid_info

(Optional)

partnum_rev

(Optional)

fab_revision

(Optional)

vid

(Optional)

clei_len

(Optional)

clei

(Optional)

eof_marker

(Optional)

csum

(Optional)

psu_product_info_block

(Optional)

format_version

(Optional)

length

(Optional)

language_code

(Optional)

mfg_type

(Optional)

mfg_info

(Optional)

name_type

(Optional)

product_name

(Optional)

part_type

(Optional)

partnum

(Optional)

product_ver_type

(Optional)

sw_certification

(Optional)

snum_type

(Optional)

snum

(Optional)

asset_type

(Optional)

asset_string

(Optional)

fruid_type

(Optional)

fruid

(Optional)

partnumrev

(Optional)

vid

(Optional)

eof_marker

(Optional)

csum

(Optional)

psu_record_info_block

(Optional)

record_type

(Optional)

record_info

(Optional)

record_len

(Optional)

record_csum

(Optional)

header_csum

(Optional)

record_identifier

(Optional)

format_ver

(Optional)

standby_pwr_budget

(Optional)

psu_class

(Optional)

psu_watts

(Optional)

Command Mode

- /exec

show srte pce ipv4 peer

show srte pce ipv4 peer [ <pce_address> ] [ __readonly__ [ TABLE_peer <pcc_address> <pce_address> <precedence> <state> ] ]

Syntax Description

show

Show running system information

srte

Show Segment-Routing Traffic Eng commands

pce

Show PCC related information

ipv4

Show ipv4 pcc information

peer

Show PCE peers

pce_address

(Optional) PCE address of the peer

__readonly__

(Optional)

TABLE_peer

(Optional) Table with a list of peers

pcc_address

(Optional) Address of the PCC

pce_address

(Optional) Address of the PCE

precedence

(Optional) Configured precedence of the PCE

state

(Optional) State of the PCE connection

Command Mode

- /exec

show srte policy

show srte policy [ { <policy_name_val> } | { color <color_val> endpoint <end_point_val> } | { policy-id <policy_id_val> } ] [ holddown ] [ detail ] [ __readonly__ [ TABLE_policy <policy_name> <source> <end_point> <state> <col> <binding_label> <policy_id> [ <flags> ] [ <holddown_time> ] [ TABLE_pref <pref> [ TABLE_paths <exp_path_name> <deleg_pce_addr> [ TABLE_index <index> <label> ] ] ] ] ]

Syntax Description

show

Show running system information

srte

Show Segment-Routing Traffic Eng commands

policy

Show existing policies

color

(Optional) Show policies with the color

endpoint

(Optional) Show Policies with the destination

end_point_val

(Optional) Endpoint for the policy

policy_name_val

(Optional) Policy name of the policy

color_val

(Optional) Color of the policy

policy_id_val

(Optional) Policy_id of the policy

policy-id

(Optional) Show Policy for the policy-id

holddown

(Optional) Show Policies that are in holddown

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_policy

(Optional) Table with a list of policies

policy_name

(Optional) Unique name for the policy

end_point

(Optional) Endpoint for the policy

source

(Optional) Source address of the policy

state

(Optional) State of the policy

col

(Optional) Color of the policy

binding_label

(Optional) Binding label of the policy

policy_id

(Optional) Policy ID

flags

(Optional) Policy Flags

holddown_time

(Optional) Time when the policy was put in holddown

TABLE_pref

(Optional) Table with a list of canditate path based on pref

pref

(Optional) Preference for candidate paths

TABLE_paths

(Optional) Table with a list of exp path for pref

exp_path_name

(Optional) Name of the explicit-path

deleg_pce_addr

(Optional) Delegated PCE Address

TABLE_index

(Optional) Table with a list of index for the exp path

index

(Optional) Index for the explicit path

label

(Optional) Label for the explicit path

Command Mode

- /exec

show srte policy fh

show srte policy fh

Syntax Description

show

Show running system information

srte

Show Segment-Routing Traffic Eng commands

policy

Show existing policies

fh

Show existing policies firsthop state

Command Mode

- /exec

show ssh key

show ssh key [ { dsa [ md5 ] | rsa [ md5 ] | ecdsa | [ md5 ] } ] [ __readonly__ { TABLE_sessions <key_type> <key_time> <key_data> <key_bitcount> <key_fingerprint> } ]

Syntax Description

show

Show running system information

ssh

Show SSH information

key

Show ssh keys

dsa

(Optional) Show dsa ssh keys

rsa

(Optional) Show rsa ssh keys

ecdsa

(Optional) Show ecdsa ssh keys

md5

(Optional) Show Fingerprint in MD5 Format

__readonly__

(Optional)

TABLE_sessions

(Optional) ssh key

key_type

(Optional) keys type

key_time

(Optional) timestamp

key_data

(Optional) ssh key data

key_bitcount

(Optional) bitcount

key_fingerprint

(Optional) fingerprint

Command Mode

- /exec

show ssh server

show ssh server [ __readonly__ { operation_status <o_status> } ]

Syntax Description

show

Show running system information

ssh

Show SSH information

server

Show whether ssh server is enabled or not

__readonly__

(Optional)

operation_status

(Optional) run-time information about ssh

o_status

(Optional) operational status of ssh server

Command Mode

- /exec

show ssx details

show ssx details [ __readonly__ [ TABLE_ssx_details <arp-timer-running><asic-instance><asic-slice><io-srcid> [ <packets-sent> ] ] ]

Syntax Description

ssx

Display SSX information

details

Show SSX details

__readonly__

(Optional) Read Only

TABLE_ssx_details

(Optional) SSX details table

Command Mode

- /exec

show ssx exporter

show ssx exporter { all | <exportername> } [ __readonly__ [ TABLE_ssx_exporters <exporter-name> <src-ip><src-udp-port><dest-ip><dest-udp-port><vrf><mtu><dscp> ] ]

Syntax Description

ssx

Display SSX information

exporter

Show exporter details

all

All sessions

exportername

SSX Exporter to display

__readonly__

(Optional) Read Only

TABLE_ssx_exporters

(Optional) SSX Exporters table

Command Mode

- /exec

show ssx monitor

show ssx monitor { all | <monitorname> } [ __readonly__ [ TABLE_ssx_monitors <monitor-name> <globally-applied><status><exportername><recordname> ] ]

Syntax Description

ssx

Display SSX information

monitor

Show monitor details

all

All sessions

monitorname

SSX Monitor to display

__readonly__

(Optional) Read Only

TABLE_ssx_monitors

(Optional) SSX monitors table

Command Mode

- /exec

show ssx record

show ssx record { all | <recordname> } [ __readonly__ [ TABLE_ssx_records <record-name> [ TABLE_stats_type <stats-type> ] <interval> ] ]

Syntax Description

ssx

Display SSX information

record

Show record details

all

All sessions

recordname

SSX Record to display

__readonly__

(Optional) Read Only

TABLE_ssx_records

(Optional) SSX records table

TABLE_stats_type

(Optional) SSX records stats type table

interval

(Optional) SSX interval

Command Mode

- /exec

show startup-config

show startup-config

Syntax Description

show

Show running system information

startup-config

Current startup configuration

Command Mode

- /exec

show startup-config aaa

show startup-config aaa

Syntax Description

show

show startup-cfg

startup-config

show startup system information

aaa

Display aaa configuration

Command Mode

- /exec

show startup-config acllog

show startup-config acllog [ all ]

Syntax Description

show

Show running system information

startup-config

Displaying the startup configuration

acllog

show startup config for acllog

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config aclmgr

show startup-config aclmgr [ all ]

Syntax Description

show

Show running system information

startup-config

Display the startup configuration

aclmgr

show startup config for aclmgr

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config adjmgr

show startup-config adjmgr [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

adjmgr

Display adjmgr information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config amt

show startup-config amt [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

amt

Display amt information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config arp

show startup-config arp [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

arp

Display arp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config assoc

show startup-config assoc [ all ]

Syntax Description

show

Show running system information

startup-config

Current saved configuration

assoc

Original ID to Translated ID Association

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config backup

show startup-config { backup | flexlink } [ all ]

Syntax Description

show

Show running system information

startup-config

System startup-config commands

backup

Show startup config for Switchport Backup

flexlink

Show startup config for Switchport Backup

all

(Optional) Show config with defaults

Command Mode

- /exec

show startup-config bfd

show startup-config bfd [ all ]

Syntax Description

show

Show system information

startup-config

Display the startup configuration

bfd

show startup config for bfd

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config bgp

show startup-config bgp [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

bgp

Display bgp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config bloggerd

show startup-config bloggerd [ all ]

Syntax Description

show

show startup-cfg

startup-config

show system startup configuration information

bloggerd

Display bloggerd configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config callhome

show startup-config callhome

Syntax Description

show

show startup-cfg

startup-config

show startup system information

callhome

Display callhome configuration

Command Mode

- /exec

show startup-config catena

show startup-config catena

Syntax Description

show

show startup-cfg

startup-config

show startup system information

catena

catena instances

Command Mode

- /exec

show startup-config cdp

show startup-config cdp [ all ]

Syntax Description

show

show startup-cfg

startup-config

show system startup configuration information

cdp

Display cdp configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config cert-enroll

show startup-config cert-enroll

Syntax Description

show

show startup-cfg

startup-config

show startup system information

cert-enroll

Display certificates configuration

Command Mode

- /exec

show startup-config cfs

show startup-config cfs [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

cfs

Display cfs configurations

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config config-profile

show startup-config config-profile [ <all_conf_profile_name> ]

Syntax Description

show

Show startup-config

startup-config

Current startup configuration

config-profile

Display port-profile configuration

all_conf_profile_name

(Optional) Enter the name of the profile

Command Mode

- /exec

show startup-config copp

show startup-config copp [ all ]

Syntax Description

show

Show running system information

startup-config

System startup-config commands

copp

Control-Plane Policing

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config dhcp

show startup-config dhcp [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

dhcp

Display dhcp snoop configurations

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config diagnostic

show startup-config diagnostic [ all ]

Syntax Description

show

Show running system information

startup-config

Contents of startup configuration

diagnostic

Diagnostic configuration

all

(Optional) Display running config with defaults

Command Mode

- /exec

show startup-config dot1x

show startup-config dot1x

Syntax Description

show

show startup-cfg

startup-config

show startup system information

dot1x

Display dot1x configuration

Command Mode

- /exec

show startup-config ecp

show startup-config ecp [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ecp

ECP (Edge Control Protocol)

all

(Optional) Display startup config with defaults

Command Mode

- /exec

show startup-config eem

show startup-config eem

Syntax Description

show

Show running system information

startup-config

Show the system startup configuration

eem

Show the event manager startup configuration

Command Mode

- /exec

show startup-config eigrp

show startup-config eigrp [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

eigrp

Display eigrp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config eltm

show startup-config eltm

Syntax Description

show

Show running system information

startup-config

Current startup configuration

eltm

Display eltm configurations

Command Mode

- /exec

show startup-config evb

show startup-config evb [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

evb

EVB (Edge Virtual Bridge)

all

(Optional) Display startup config with defaults

Command Mode

- /exec

show startup-config exclude

show startup-config exclude <feature-list> +

Syntax Description

show

Show running system information

startup-config

Current startup configuration

exclude

Exclude startup configuration of specified features

feature-list

Exclude features

Command Mode

- /exec

show startup-config expand-port-profile

show startup-config expand-port-profile

Syntax Description

show

Show running system information

startup-config

System startup-config commands

expand-port-profile

Expand port profile

Command Mode

- /exec

show startup-config fabric forwarding

show startup-config fabric forwarding [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config fabric multicast

show startup-config fabric multicast [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

fabric

Fabric

multicast

Multicast information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config fcoe_mgr

show startup-config fcoe_mgr

Syntax Description

show

show startup-cfg

startup-config

show startup system information

fcoe_mgr

Display fcoe_mgr configuration

Command Mode

- /exec

show startup-config hardware-telemetry

show startup-config hardware-telemetry [ all ]

Syntax Description

startup-config

Current startup configuration

hardware-telemetry

show startup config for hardware-telemetry

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config hsrp

show startup-config hsrp

Syntax Description

show

Show system information

startup-config

System startup configuration

hsrp

HSRP startup configuration

Command Mode

- /exec

show startup-config icam

show startup-config icam

Syntax Description

show

show startup-cfg

startup-config

show startup system information

icam

icam services

Command Mode

- /exec

show startup-config icmpv6

show startup-config icmpv6 [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

icmpv6

Display icmpv6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config igmp

show startup-config igmp [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

igmp

Display igmp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config imp

show startup-config imp [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

imp

Display imp information

all

(Optional) Display start config with defaults clis

Command Mode

- /exec

show startup-config interface

show startup-config interface <if0> [ membership ] [ expand-port-profile ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

interface

Interface configuration

if0

interface type and number in module/slot format

membership

(Optional) Show membership information

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show startup-config interface

show startup-config interface [ <if0> ] [ expand-port-profile ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

interface

Interface configuration

if0

(Optional) interface type and number in module/slot format

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show startup-config ip

show startup-config ip [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ip

Display ip information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config ipqos

show startup-config ipqos [ all ]

Syntax Description

show

Show running system information

startup-config

Display the startup configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config ipv6

show startup-config ipv6 [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ipv6

Display ipv6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config isis

show startup-config isis [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

isis

Display isis information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config l3vm

show startup-config l3vm [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

l3vm

Display l3vm information

all

(Optional) Display running config with defaults

Command Mode

- /exec

show startup-config ldap

show startup-config ldap

Syntax Description

show

show startup-cfg

startup-config

show startup system information

ldap

Display ldap configuration

Command Mode

- /exec

show startup-config license

show startup-config license [ all ]

Syntax Description

show

show startup-cfg

startup-config

show startup system information

license

Display licensing configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config lldp

show startup-config lldp [ all ]

Syntax Description

show

show startup-cfg

startup-config

show system startup configuration information

lldp

Display lldp configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config log

show startup-config { log | mdp-log } [ bootstrap ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

mdp-log

Displays execution log of last used mdp ascii startup configuration

log

Displays execution log of last used ascii startup configuration

bootstrap

(Optional) Bootstrap config replay execution log

Command Mode

- /exec

show startup-config macsec

show startup-config macsec

Syntax Description

show

Show running system information

startup-config

show startup system information

macsec

Show CTS information

Command Mode

- /exec

show startup-config mmode

show startup-config mmode [ all ]

Syntax Description

show

Show running system information

startup-config

Show startup configuration

mmode

Display maintenance mode startup configuration

all

(Optional) Show startup config with defaults

Command Mode

- /exec

show startup-config monitor

show startup-config monitor

Syntax Description

show

Show running system information

startup-config

Current startup configuration

monitor

Configure Ethernet SPAN sessions

Command Mode

- /exec

show startup-config mpls static

show startup-config mpls static [ all ]

Syntax Description

show

Show running system information

startup-config

Current operating configuration

mpls

Display MPLS status and configuration

static

Static Label Bindings

all

(Optional) Display running-config with defaults

Command Mode

- /exec

show startup-config mpls strip

show startup-config mpls strip [ all ]

Syntax Description

show

Show running system information

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

startup-config

System startup configuration

all

(Optional) Show startup configuration for STRIPCL with defaults

Command Mode

- /exec

show startup-config mpls traffic-eng

show startup-config mpls traffic-eng [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

mpls

show startup config for mpls features

traffic-eng

show startup-config for Traffic Engineering

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config msdp

show startup-config msdp [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

msdp

Display msdp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config nat

show startup-config nat [ all ]

Syntax Description

show

Show system information

startup-config

Display the startup configuration

nat

show startup config for nat

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config nbm

show startup-config nbm

Syntax Description

show

Show running system information

startup-config

Current startup configuration

nbm

Non Blocking Multicast

Command Mode

- /exec

show startup-config netflow

show startup-config { netflow | nfm } [ all ]

Syntax Description

show

Show system information

startup-config

System startup configuration

netflow

Show NetFlow configuration

nfm

Show NFM configuration

all

(Optional) Show NFM config with defaults

Command Mode

- /exec

show startup-config ngoam

show startup-config ngoam

Syntax Description

show

Show running system information

startup-config

Show startup system information

ngoam

ngoam configuration

Command Mode

- /exec

show startup-config ntp

show startup-config ntp [ all ]

Syntax Description

show

Show information

startup-config

Show startup system configuration

ntp

Show NTP information

all

(Optional) Show all NTP startup configuration

Command Mode

- /exec

show startup-config nv overlay

show startup-config nv overlay [ all ]

Syntax Description

show

Show system information

startup-config

System startup configuration

nv

NVE startup configuration

overlay

NVE startup configuration

all

(Optional) Show NVE config with defaults

Command Mode

- /exec

show startup-config nxsdk

show startup-config nxsdk [ all ]

Syntax Description

show

Show running system information

startup-config

Display the startup configuration

nxsdk

NXOS SDK

all

(Optional) Display running config with defaults

Command Mode

- /exec

show startup-config openflow

show startup-config openflow [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

openflow

Show startup config for OpenFlow

all

(Optional) Show startup config with defaults

Command Mode

- /exec

show startup-config ospf

show startup-config ospf [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ospf

Display ospf information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config ospfv3

show startup-config ospfv3 [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ospfv3

Display ospfv3 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config param-list

show startup-config param-list [ <plistname> ]

Syntax Description

show

Show startup-cfg

startup-config

show startup configuration

param-list

Display param-list configuration

plistname

(Optional) Enter the name of the param list

Command Mode

- /exec

show startup-config pim

show startup-config pim [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

pim

Display pim information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config pim6

show startup-config pim6 [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

pim6

Display pim6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config plb-services

show startup-config plb-services

Syntax Description

show

show startup-cfg

startup-config

show startup system information

plb-services

PLB services

Command Mode

- /exec

show startup-config poe

show startup-config poe [ all ]

Syntax Description

show

Show running system information

startup-config

Current saved configuration

poe

Power over Ethernet

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config port-profile

show startup-config port-profile [ <all_profile_name> ]

Syntax Description

show

Show startup-config

startup-config

Current startup configuration

port-profile

Display port-profile configuration

all_profile_name

(Optional) Enter the name of the profile

Command Mode

- /exec

show startup-config port-security

show startup-config port-security [ all ]

Syntax Description

show

show startup-cfg

startup-config

show startup system information

port-security

Display port-security configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config ptp

show startup-config ptp [ all ]

Syntax Description

startup-config

Current startup configuration

ptp

show startup config for ptp

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config radius

show startup-config radius

Syntax Description

show

show startup-cfg

startup-config

show startup system information

radius

Display radius configuration

Command Mode

- /exec

show startup-config rip

show startup-config rip [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

rip

Display rip information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config routing ip multicast

show startup-config routing { ip | ipv4 } multicast [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

routing

Display routing information

ip

Display IP information

ipv4

Display IP information

multicast

Display multicast information

all

(Optional) Display startup config with defaults clis

Command Mode

- /exec

show startup-config routing ipv6 multicast

show startup-config routing ipv6 multicast [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

routing

Display routing information

ipv6

Display IPv6 information

multicast

Display multicast information

all

(Optional) Display startup config with defaults clis

Command Mode

- /exec

show startup-config rpm

show startup-config rpm [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

rpm

Display Route Policy Manager (RPM) information

all

(Optional) Display startup config with defaults

Command Mode

- /exec

show startup-config security

show startup-config security

Syntax Description

show

show startup-cfg

startup-config

show startup system information

security

Display security configuration

Command Mode

- /exec

show startup-config segment-routing

show startup-config segment-routing [ all ]

Syntax Description

show

Show running system information

startup-config

Show startup configuration

segment-routing

Display segment-routing startup configuration

all

(Optional) Show startup config with defaults

Command Mode

- /exec

show startup-config services

show startup-config services

Syntax Description

show

show startup-cfg

startup-config

show startup system information

services

services

Command Mode

- /exec

show startup-config sflow

show startup-config sflow [ all ]

Syntax Description

startup-config

Current startup configuration

sflow

show startup config for sflow

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config sla responder

show startup-config sla responder

Syntax Description

show

show startup-cfg

startup-config

show startup system information

sla

Service Level Agreement (SLA)

responder

Show information about sla-responder

Command Mode

- /exec

show startup-config sla sender

show startup-config sla sender

Syntax Description

show

show startup-cfg

startup-config

show startup system information

sla

Service Level Agreement (SLA)

sender

Show information about sla-sender

Command Mode

- /exec

show startup-config sla twamp-server

show startup-config sla twamp-server

Syntax Description

show

show startup-cfg

startup-config

show startup system information

sla

Service Level Agreement (SLA)

twamp-server

Show information about twamp-server

Command Mode

- /exec

show startup-config smart-channel

show startup-config smart-channel

Syntax Description

show

show startup-cfg

startup-config

show startup system information

smart-channel

smart-channel services

Command Mode

- /exec

show startup-config snmp

show startup-config snmp [ all ]

Syntax Description

show

show startup-cfg

startup-config

show startup system information

snmp

Display snmp configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config srte

show startup-config srte

Syntax Description

show

Show running system information

startup-config

Current operating configuration

srte

SRTE

Command Mode

- /exec

show startup-config switch

show startup-config { switch-profile | include-switch-profile }

Syntax Description

show

Show running system information

startup-config

System startup configuration

switch-profile

Show switch-profile information

include-switch-profile

Show startup and switch-profile configuration

Command Mode

- /exec

show startup-config tacacs

show startup-config tacacs +

Syntax Description

show

show startup-cfg

startup-config

show startup system information

Command Mode

- /exec

show startup-config telemetry

show startup-config telemetry [ all ]

Syntax Description

show

show startup system configuration

startup-config

show startup system information

telemetry

Display telemetry configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config track

show startup-config track

Syntax Description

show

Show running system information

startup-config

Show the system startup configuration

track

Show the track startup configuration

Command Mode

- /exec

show startup-config udld

show startup-config udld

Syntax Description

show

Show running system information

startup-config

Current startup configuration

udld

Show udld configuration

Command Mode

- /exec

show startup-config vdc-all

show startup-config vdc-all

Syntax Description

show

Show running system information

startup-config

Current startup configuration

vdc-all

Display config from all VDC

Command Mode

- /exec

show startup-config vdc

show startup-config vdc [ all ]

Syntax Description

show

Show running system information

startup-config

Current saved configuration

vdc

Show Virtual Device Contexts

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config virtual-service

show startup-config virtual-service

Syntax Description

show

Show running system information

startup-config

System startup-config commands

virtual-service

Show startup config for virtualization services

Command Mode

- /exec

show startup-config vlan

show startup-config vlan <vlan-id>

Syntax Description

show

Show running system information

startup-config

System startup-config commands

vlan

Vlan commands

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec

show startup-config vlan

show startup-config vlan

Syntax Description

show

Show running system information

startup-config

System startup-config commands

vlan

Vlan commands

Command Mode

- /exec

show startup-config vmtracker

show startup-config vmtracker [ all ]

Syntax Description

show

Show system information

startup-config

System startup configuration

vmtracker

Show VMTracker configuration

all

(Optional) Show VMTracker config with defaults

Command Mode

- /exec

show startup-config vpc

show startup-config vpc [ all ]

Syntax Description

startup-config

Current startup configuration

vpc

show startup config for vPC

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config vrf

show startup-config vrf <vrf-cfg-name> [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

vrf

Display VRF information

vrf-cfg-name

Configurable VRF name

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config vrf default

show startup-config vrf default [ all ]

Syntax Description

show

Show running system information

startup-config

Current startup configuration

vrf

Display VRF information

default

Known VRF name

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config vrrpv3

show startup-config vrrpv3 [ all ]

Syntax Description

show

Show system information

startup-config

System startup configuration

vrrpv3

VRRPv3 startup configuration

all

(Optional) show startup config of VRRPv3 with defaults

Command Mode

- /exec

show startup-config vshd

show startup-config vshd

Syntax Description

show

Show startup system information

startup-config

Current startup configuration

vshd

Show startup config for vshd

Command Mode

- /exec

show startup-config vtp

show startup-config vtp [ all ]

Syntax Description

show

Show running system information

startup-config

System startup-config commands

vtp

Show startup configuration for VTP

all

(Optional) Show startup configuration for VTP with defaults

Command Mode

- /exec

show startup-config wwnm

show startup-config wwnm

Syntax Description

show

Show running system information

startup-config

Current startup configuration

wwnm

Display WWN Manager startup configuration

Command Mode

- /exec

show summary

show { ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 [ { unicast | multicast } ] ] } summary [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

summary

Display summarized information of BGP state

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

Display BGP information for all address families

Command Mode

- /exec

show sup-monitor drops session

show sup-monitor drops session <session_number> [ module <module> ]

Syntax Description

show

Show running system information

sup-monitor

Show Ethernet SPAN information

drops

show drop count

session

Show session info

session_number

module

(Optional) Slot/module

module

(Optional) Slot/module number

Command Mode

- /exec

show switch-profile

show switch-profile [ <profile-name> ] { session-history | status commit } [ __readonly__ <prof-name> TABLE_session <session_index> <start_usec> <start_time> <end_usec> <end_time> <revision_number> <session_type> <session_subtype> <peer_triggered> [ <profile_status> ] [ <local_status> ] [ <local_error> ] [ <peer_address> ] [ <peer_sync_status> ] [ <merge_flags> ] [ <remote_status> ] [ <remote_error> ] ]

Syntax Description

show

Show running system information

switch-profile

Show switch-profile

session-history

Switch-profile session-history

profile-name

(Optional) switch-profile name

status

Switch-profile sync status

commit

Switch-profile last commit status

__readonly__

(Optional)

prof-name

(Optional)

TABLE_session

(Optional)

session_index

(Optional)

start_usec

(Optional)

start_time

(Optional)

end_usec

(Optional)

end_time

(Optional)

revision_number

(Optional)

session_type

(Optional)

session_subtype

(Optional)

peer_triggered

(Optional)

profile_status

(Optional)

local_status

(Optional)

local_error

(Optional)

peer_address

(Optional)

peer_sync_status

(Optional)

merge_flags

(Optional)

remote_status

(Optional)

remote_error

(Optional)

Command Mode

- /exec

show switch-profile

show switch-profile [ __readonly__ <profile_name> <cfg_rev> ]

Syntax Description

show

Show running system information

switch-profile

Show switch-profiles

__readonly__

(Optional)

profile_name

(Optional)

cfg_rev

(Optional)

Command Mode

- /exec

show switch-profile buffer

show switch-profile [ <profile-name> ] buffer [ __readonly__ <prof-name> [ TABLE_commands <seq_no> [ <cmd> ] + ] ]

Syntax Description

show

Show running system information

switch-profile

Show switch-profile

buffer

buffered commands

profile-name

(Optional) switch-profile name

__readonly__

(Optional)

prof-name

(Optional)

TABLE_commands

(Optional)

seq_no

(Optional)

cmd

(Optional)

Command Mode

- /exec

show switch-profile peer

show switch-profile [ <profile-name> ] peer [ <dest-ip> ] [ details ] [ __readonly__ <prof-name> [ <rev> ] [ <peer_address> ] [ <peer_sync_status> ] [ <merge_flags> ] [ <remote_status> ] [ <remote_error> ] [ <cmd> ] + ]

Syntax Description

show

Show running system information

switch-profile

Show switch-profile

profile-name

(Optional) switch-profile name

peer

peer info

dest-ip

(Optional) IPv4 address (A.B.C.D) of destination

details

(Optional) information in detail

__readonly__

(Optional)

prof-name

(Optional)

rev

(Optional)

peer_address

(Optional)

peer_sync_status

(Optional)

merge_flags

(Optional)

remote_status

(Optional)

remote_error

(Optional)

cmd

(Optional)

Command Mode

- /exec

show switch-profile status

show switch-profile [ <profile-name> ] status [ __readonly__ <prof-name> <start_usec> <start_time> <end_usec> <end_time> <revision_number> <session_type> [ <session_subtype> ] <peer_triggered> <profile_status> <local_status> <local_error> [ <peer_address> ] [ <peer_sync_status> ] [ <merge_flags> ] [ <remote_status> ] [ <remote_error> ] ]

Syntax Description

show

Show running system information

switch-profile

Show switch-profile

status

Switch-profile sync status

profile-name

(Optional) switch-profile name

__readonly__

(Optional)

prof-name

(Optional)

start_usec

(Optional)

start_time

(Optional)

end_usec

(Optional)

end_time

(Optional)

revision_number

(Optional)

session_type

(Optional)

session_subtype

(Optional)

peer_triggered

(Optional)

profile_status

(Optional)

local_status

(Optional)

local_error

(Optional)

peer_address

(Optional)

peer_sync_status

(Optional)

merge_flags

(Optional)

remote_status

(Optional)

remote_error

(Optional)

Command Mode

- /exec

show switch-scope controller

show switch-scope controller

Syntax Description

show

Show running system information

switch-scope

switch-scope

controller

Controller command

Command Mode

- /exec

show switching-mode

show switching-mode [ __readonly__ TABLE_switching_mode <switching-mode-desc> ]

Syntax Description

show

Show running system information

switching-mode

Show the operating switching mode

__readonly__

(Optional)

TABLE_switching_mode

(Optional) the xml switching_mode configuration

switching-mode-desc

(Optional) switching mode description

Command Mode

- /exec

show switching-mode fabric-speed

show switching-mode fabric-speed [ __readonly__ TABLE_switching_mode <switching-mode-desc> ]

Syntax Description

show

Show running system information

switching-mode

Show the operating switching mode

__readonly__

(Optional)

TABLE_switching_mode

(Optional) the xml switching_mode configuration

switching-mode-desc

(Optional) switching mode description

fabric-speed

Show the fabric speed

Command Mode

- /exec

show system acl

show system acl [ __readonly__ TABLE_system_acl <protocol> [ TABLE_type <type> <acl_name> <inout> ] ]

Syntax Description

show

Show running system information

system

System management commands

acl

ACL parameters

__readonly__

(Optional)

TABLE_system_acl

(Optional)

protocol

(Optional) protocol

TABLE_type

(Optional)

type

(Optional) type

acl_name

(Optional)

inout

(Optional) Traffic direction

Command Mode

- /exec

show system auto-collect tech-support

show system auto-collect tech-support [ __readonly__ <result> ]

Syntax Description

show

Show running system information

system

System management commands

auto-collect

Auto collection of information

tech-support

Collect tech-support in case of service causing supervisor reset

__readonly__

(Optional)

result

(Optional) show tech collection enable status

Command Mode

- /exec

show system boottime

show system boottime [ __readonly__ { TABLE_uptimeinf <slot> <starttime> <daysup> <hoursup> <minutesup> <secondsup> } ]

Syntax Description

show

Show running system information

system

System-related show commands

boottime

Show platform boot time of each mdoule

__readonly__

(Optional)

TABLE_uptimeinf

(Optional) Show uptime info

slot

(Optional) Slot

starttime

(Optional) Start Time

daysup

(Optional) Days Up

hoursup

(Optional) Hours Up

minutesup

(Optional) Minutes Up

secondsup

(Optional) Seconds Up

Command Mode

- /exec

show system clis event-history

show system [ internal ] clis event-history { nvdb | client | errors | parser | ha | cli | objstr | objstr-errors }

Syntax Description

show

Display output

system

System-related show commands

internal

(Optional) Commands for internal use

clis

cli server

event-history

Event history logs for clis

nvdb

Log of NVDB and PSS events

client

Log of client interaction events

errors

Log of errors

parser

Log of parser events

ha

Log of ha events

cli

Log of command events

objstr

Log of Object Store events

objstr-errors

Log of Object Store error events

Command Mode

- /exec

show system config reload-pending

show system config reload-pending [ __readonly__ { TABLE_reload_pending <cmds_list> } ]

Syntax Description

show

Show running system information

system

System-related show commands

config

Config commands which require reload

reload-pending

Commands which require a reload

__readonly__

(Optional)

TABLE_reload_pending

(Optional) reload pending commands list

cmds_list

(Optional) cmds_list

Command Mode

- /exec

show system cores

show system cores [ __readonly__ { <content> } ]

Syntax Description

show

Show running system information

system

System-related show commands

cores

Displays core transfer option

__readonly__

(Optional)

content

(Optional) Core transfer option

Command Mode

- /exec

show system default switchport

show system default switchport [ __readonly__ <sys_def_port_state> <sys_def_trunk_mode> <sys_def_link_fail_syslog_level> <sys_def_tx_credit_queue_type> ]

Syntax Description

show

Show running system information

__readonly__

(Optional) read only

sys_def_port_state

(Optional) System default port state

sys_def_trunk_mode

(Optional) System default trunk mode

sys_def_link_fail_syslog_level

(Optional) System default link failure syslog logging level

sys_def_tx_credit_queue_type

(Optional) System default tx credit queue type

system

System-related show commands

default

Show system default values

switchport

Show default values for switchport attributes

Command Mode

- /exec

show system dme status

show system dme status [ __readonly__ <dme-status> ]

Syntax Description

show

Show running system information

system

System-related show commands

dme

Display dme information

status

Display dme enable/disable status information

__readonly__

(Optional)

dme-status

(Optional) DME enable/disable status

Command Mode

- /exec

show system error-id

show system error-id { list | <i0> } [ __readonly__ <errorid> <facility> <desc> ]

Syntax Description

show

Show running system information

system

System-related show commands

error-id

Show description about errors

list

Show description about all error IDs

i0

Show description about specific error

__readonly__

(Optional)

errorid

(Optional)

facility

(Optional)

desc

(Optional)

Command Mode

- /exec

show system exception-info

show system exception-info [ __readonly__ { TABLE_exception { <second> <panic_data> <register_data> <stack_pointer> <stack_depth> <stack_timestamp> <stacl_magic> <hdr_length> <stack_data> <pre_usec> <pre_sec> <int_t> <reason> <service> <version> } } ]

Syntax Description

show

Show running system information

system

System-related show commands

exception-info

Show last exception log information

__readonly__

(Optional)

TABLE_exception

(Optional)

second

(Optional) Time of exception

panic_data

(Optional) Panic information dump

register_data

(Optional) CPU register dump

stack_pointer

(Optional) Current Stack-pointer

stack_depth

(Optional) Current Stack-depth

stack_timestamp

(Optional) Stack dump timestamp

stacl_magic

(Optional) Stack Magic

hdr_length

(Optional) Hdr length

stack_data

(Optional) Stack Dump

pre_usec

(Optional)

pre_sec

(Optional)

int_t

(Optional)

reason

(Optional) Reason

service

(Optional) Service

version

(Optional) Version

Command Mode

- /exec

show system fabric-mode

show system fabric-mode [ __readonly__ TABLE_system_fabric_mode <system-fabric-mode-desc> ]

Syntax Description

show

Show running system information

system

Show system information

fabric-mode

Show the fabric operation mode information

__readonly__

(Optional)

TABLE_system_fabric_mode

(Optional) the xml system_fabric_mode configuration

system-fabric-mode-desc

(Optional) system fabric mode description

Command Mode

- /exec

show system fast-reload stabilization-timer

show system fast-reload stabilization-timer [ __readonly__ { <timer_val> } ]

Syntax Description

show

Show running system information

system

System management commands

fast-reload

fast-reload software

stabilization-timer

Network stabilization time in seconds before fast-reload can be executed after the previous reload

__readonly__

(Optional) Read Only

timer_val

(Optional) XML attribute for timer value

Command Mode

- /exec

show system inband queuing statistics

show system inband queuing statistics [ __readonly__ { TABLE_sys_inband_queue_stats <inbandpktunmap> <inbandpktbpduqueue> <inbandpktmapq0> <inbandpktmapq1> <klmpktmapbpdu> <klmpktmaparp> <klmpktmapq0> <klmpktmapq1> <klmpktmapveobc> <queuename> [ TABLE_bpdu_stats { <pmrecvpkts> <pmdroppkts> <pmcongested> <rcvbuf> <sndbuf> <pmnodrop> } ] [ TABLE_q_stats { <indexstat> <ipmrecvpkts> <ipmdroppkts> <ipmcongested> <ircvbuf> <isndbuf> <ipmnodrop> } ] } ]

Syntax Description

show

Show running system information

system

System-related show commands

inband

Inband Commands

queuing

Inband Queuing commands

statistics

Inband statistics

__readonly__

(Optional)

TABLE_sys_inband_queue_stats

(Optional) System Inband Statistics

inbandpktunmap

(Optional) Inband packets unmapped

inbandpktbpduqueue

(Optional) Inband packets mapped to bpdu

inbandpktmapq0

(Optional) Inband packets mapped to q0

inbandpktmapq1

(Optional) Inband packets mapped to q1

klmpktmapbpdu

(Optional) In KLM packets mapped to bpdu

klmpktmaparp

(Optional) In KLM packets mapped to arp

klmpktmapq0

(Optional) In KLM packets mapped to q0

klmpktmapq1

(Optional) In KLM packets mapped to q1

klmpktmapveobc

(Optional) In KLM packets mapped to veobc

queuename

(Optional) Inband queue name

TABLE_bpdu_stats

(Optional) BPDU Statistics

pmrecvpkts

(Optional) BPDU Receive Packets

pmdroppkts

(Optional) BPDU Drop Packets

pmcongested

(Optional) BPDU Congested

rcvbuf

(Optional) BPDU Receive Buffer

sndbuf

(Optional) BPDU Send Buffer

pmnodrop

(Optional) BPDU No drop

TABLE_q_stats

(Optional) Queue Statistics

indexstat

(Optional) Queue Index

ipmrecvpkts

(Optional) Queue receive packets

ipmdroppkts

(Optional) Queue drop packets

ipmcongested

(Optional) Queue Congested

ircvbuf

(Optional) Queue receive buffer

isndbuf

(Optional) Queue send buffer

ipmnodrop

(Optional) Queue no drop

Command Mode

- /exec

show system inband queuing status

show system inband queuing status [ __readonly__ [ { TABLE_sys_inband_queue_status <pminbandweigh0> <pminbandweigh1> <pminbandweigh2> } ] ]

Syntax Description

show

Show running system information

system

System-related show commands

inband

Inband Commands

queuing

Inband Queuing commands

status

Selective Packet Discard Information

__readonly__

(Optional)

TABLE_sys_inband_queue_status

(Optional) System Inband Status

pminbandweigh0

(Optional) BPDU Weight

pminbandweigh1

(Optional) Q0 Weight

pminbandweigh2

(Optional) Q1 Weight

Command Mode

- /exec

show system kgdb

show system kgdb

Syntax Description

show

Show running system information

system

System-related show commands

kgdb

Displays state of kgdb_enable flag

Command Mode

- /exec

show system login

show system login [ __readonly__ [ [ <acc_list> ] [ <attempts> ] ] [ <within> <block_for> <time> ] [ <fail_count> ] [ <switch_mode> ] ]

Syntax Description

show

Show running system information

system

System-related show commands

login

Display Secure Login Configurations and State

__readonly__

(Optional)

acc_list

(Optional) Appiled ACL's

attempts

(Optional) Number of login failures

within

(Optional) Number of login failures within time

block_for

(Optional) Login disabled for time

time

(Optional) Time remaining to re-enble login

fail_count

(Optional) Login failure count

switch_mode

(Optional) Mode of operation

Command Mode

- /exec

show system login failures

show system login failures [ __readonly__ [ { TABLE_loginStats <username> <port> <remote_addr> <app_name> <time> } ] ]

Syntax Description

show

Show running system information

system

System-related show commands

login

Secure Login

failures

Display Login failures in the current watch period

__readonly__

(Optional)

TABLE_loginStats

(Optional)

username

(Optional) User name

port

(Optional) Login port number

remote_addr

(Optional) Remote address

app_name

(Optional) Application name

time

(Optional) Login time

Command Mode

- /exec

show system memory-thresholds

show system memory-thresholds [ __readonly__ <critical_mem_threshold> <severe_mem_threshold> <minor_mem_threshold> ]

Syntax Description

show

Show running system information

__readonly__

(Optional)

critical_mem_threshold

(Optional) Critical System Memory Threshold

severe_mem_threshold

(Optional) Severe System Memory Threshold

minor_mem_threshold

(Optional) Minor System Memory Threshold

system

System management commands

memory-thresholds

Set memory thresholds on the card

Command Mode

- /exec

show system mode

show system mode [ __readonly__ <system_mode> [ <timer_state> ] ]

Syntax Description

show

Show running system information

system

System configuration commands

mode

Show system mode

__readonly__

(Optional)

system_mode

(Optional) system mode

timer_state

(Optional) timer state

Command Mode

- /exec

show system nve infra-vlans

show system nve infra-vlans [ __readonly__ [ current_active_vlan <active_vlan_output> ] { available_infra_vlan <available_vlan_output> } ]

Syntax Description

show

Show running system information

system

System-related show commands

nve

Show NVE information

infra-vlans

Show NVE infra-vlans related information

__readonly__

(Optional)

current_active_vlan

(Optional) Current Active Infra Vlan

active_vlan_output

(Optional) Current active infra vlan output

available_infra_vlan

(Optional) Available Infra Vlan

available_vlan_output

(Optional) Available Infra Vlan output

Command Mode

- /exec

show system pss shrink status

show system pss shrink status [ details ] [ __readonly__ { [ <summary> ] [ TABLE_per_vdc <vdc_id> [ TABLE_detail_events <service> <vdc> <event> ] ] [ TABLE_events <service> <vdc> <event> ] } ]

Syntax Description

show

Show running system information

system

System-related show commands

pss

Displays last pss shrink status

shrink

Displays last pss shrink status

status

Displays last pss shrink status

details

(Optional) Displays last pss shrink status details

__readonly__

(Optional)

summary

(Optional) PSS shrink summary

TABLE_per_vdc

(Optional)

vdc_id

(Optional) VDC id

TABLE_detail_events

(Optional) PSS shrink events

service

(Optional) Service name

vdc

(Optional) VDC number

event

(Optional) PSS evnets

TABLE_events

(Optional) PSS shrink events

service

(Optional) Service name

vdc

(Optional) VDC number

event

(Optional) PSS evnets

Command Mode

- /exec

show system redundancy ha status

show system redundancy ha status [ __readonly__ { [ TABLE_ha_status <vdc_id> <this_sup_internal_state> <other_sup_internal_state> ] } ]

Syntax Description

show

Show running system information

system

System-related show commands

redundancy

redundancy status

ha

vdc redundancy status

status

all vdc redundancy status

__readonly__

(Optional)

TABLE_ha_status

(Optional) HA status for all vdcs

vdc_id

(Optional) vdc id

this_sup_internal_state

(Optional) This Supervisor State

other_sup_internal_state

(Optional) Remote Supervisor State

Command Mode

- /exec

show system redundancy status

show system redundancy status [ __readonly__ { <rdn_mode_admin> <rdn_mode_oper> <this_sup> <this_sup_rdn_state> <this_sup_sup_state> <this_sup_internal_state> [ <other_sup> ] [ <other_sup_rdn_state> ] [ <other_sup_sup_state> ] [ <other_sup_internal_state> ] } ]

Syntax Description

show

Show running system information

system

System-related show commands

redundancy

redundancy status

status

Current redundancy status

__readonly__

(Optional) readonly

rdn_mode_admin

(Optional) Redundancy Mode Admin

rdn_mode_oper

(Optional) Redundancy Mode Operational

this_sup

(Optional) This Supervisor

this_sup_rdn_state

(Optional) Redundancy State

this_sup_sup_state

(Optional) Supervisor State

this_sup_internal_state

(Optional) Supervisor State

other_sup

(Optional) Other Supervisor

other_sup_sup_state

(Optional) Supervisor State

other_sup_rdn_state

(Optional) Redundancy tate

other_sup_internal_state

(Optional) Supervisor State

Command Mode

- /exec

show system reset-reason

show system reset-reason [ __readonly__ { TABLE_reason <slot> { TABLE_rr <time> <reason> <service> <version> } } ]

Syntax Description

show

Show running system information

system

System-related show commands

reset-reason

Show last reset reason

__readonly__

(Optional)

TABLE_reason

(Optional) Reset reason info

slot

(Optional) slot

TABLE_rr

(Optional) reset reason

time

(Optional) time

reason

(Optional) reset reason

service

(Optional) service name

version

(Optional) version

Command Mode

- /exec

show system reset-reason

show system reset-reason <s0> <santa-cruz-range> [ __readonly__ { TABLE_xbarreason <slot> { TABLE_rr <time> <reason> <service> <version> } } ]

Syntax Description

show

Show running system information

system

System-related show commands

reset-reason

Show last reset reason

s0

Show xbar module reset reason

santa-cruz-range

please enter the xbar module number

__readonly__

(Optional)

TABLE_xbarreason

(Optional) Reset reason info

slot

(Optional) slot

TABLE_rr

(Optional) reset reason

time

(Optional) time

reason

(Optional) reset reason

service

(Optional) service name

version

(Optional) version

Command Mode

- /exec

show system reset-reason module

show system reset-reason module <module> [ __readonly__ { TABLE_reason <slot> { TABLE_rr <time> <reason> <service> <version> } } ]

Syntax Description

show

Show running system information

system

System-related show commands

reset-reason

Show last reset reason

module

Show per module reset-reason code

module

please enter module number

__readonly__

(Optional)

TABLE_reason

(Optional) Reset reason info

slot

(Optional) slot

TABLE_rr

(Optional) reset reason

time

(Optional) time

reason

(Optional) reset reason

service

(Optional) service name

version

(Optional) version

Command Mode

- /exec

show system resources

show system resources <i0>

Syntax Description

show

Show running system information

system

System-related show commands

resources

Show system resources

i0

time interval in seconds

Command Mode

- /exec

show system resources

show system resources [ __readonly__ { [ <load_avg_1min> ] [ <load_avg_5min> ] [ <load_avg_15min> ] [ <processes_total> ] [ <processes_running> ] [ <cpu_state_user> ] [ <cpu_state_kernel> ] [ <cpu_state_idle> ] [ TABLE_cpu_usage <cpuid> <user> <kernel> <idle> ] [ <memory_usage_total> ] [ <memory_usage_used> ] [ <memory_usage_free> ] [ <current_memory_status> ] } ]

Syntax Description

show

Show running system information

system

System-related show commands

resources

Show system resources

__readonly__

(Optional)

TABLE_cpu_usage

(Optional) All Cpu Usage Information

load_avg_1min

(Optional) Load Average 1 Min

load_avg_5min

(Optional) Load Average 5 Min

load_avg_15min

(Optional) Load Average 15 Min

processes_total

(Optional) Total processes

processes_running

(Optional) Running Processes

cpu_state_user

(Optional) CPU State User

cpu_state_kernel

(Optional) CPU State Kernel

cpu_state_idle

(Optional) CPU State Idle

cpuid

(Optional) CPU id

user

(Optional) user time

kernel

(Optional) kernel time

idle

(Optional) idle time

memory_usage_total

(Optional) Memory Usage Total

memory_usage_used

(Optional) Memory Usage Used

memory_usage_free

(Optional) Memory Usage Free

current_memory_status

(Optional) Current Memory Status

Command Mode

- /exec

show system resources module

show system resources [ <i0> ] module <module>

Syntax Description

show

Show running system information

system

System-related show commands

resources

Show system resources

i0

(Optional) time interval in seconds

module

Show system resources for specified module

module

module number

Command Mode

- /exec

show system resources module all

show system resources [ <i0> ] module all [ __readonly__ { TABLE_cpuinfo <sts_msg1> <cpu_5sec> <cpu_1min> <cpu_5min> } { TABLE_meminfo <sts_msg2> <mem_module> <mem_total> <mem_free> <mem_used> } ]

Syntax Description

show

Show running system information

system

System-related show commands

resources

Show system resources

i0

(Optional) time interval in seconds

module

Show system resources for specified module

all

Show system resources for all modules

__readonly__

(Optional)

TABLE_cpuinfo

(Optional)

sts_msg1

(Optional)

cpu_5sec

(Optional)

cpu_1min

(Optional)

cpu_5min

(Optional)

TABLE_meminfo

(Optional)

sts_msg2

(Optional)

mem_module

(Optional)

mem_total

(Optional)

mem_free

(Optional)

mem_used

(Optional)

Command Mode

- /exec

show system routing mode

show system routing mode [ __readonly__ TABLE_system_routing_mode { [ <configured-sys-routing-mode> ] [ <applied-sys-routing-mode> ] [ <svi-hardware-flood-mode> ] [ <routing-perf-mode> ] [ <mrouting-perf-mode> ] } ]

Syntax Description

show

Show running system information

system

Show system information

routing

Show routing related information

mode

Show mode related information

__readonly__

(Optional)

TABLE_system_routing_mode

(Optional) the xml system_routing_mode configuration

configured-sys-routing-mode

(Optional) Configured system routing mode description

applied-sys-routing-mode

(Optional) Applied system routing mode description

svi-hardware-flood-mode

(Optional) Configured SVI hardware flood mode description

routing-perf-mode

(Optional) Applied System Routing Performance Mode description

mrouting-perf-mode

(Optional) Applied System Mrouting Performance Mode

Command Mode

- /exec

show system srg

show system srg

Syntax Description

show

Show running system information

system

System-related show commands

srg

Displays the system SRG

Command Mode

- /exec

show system standby manual-boot

show system standby manual-boot [ __readonly__ { <content> } ]

Syntax Description

show

Show running system information

system

System-related show commands

standby

Displays system standby manual boot option

manual-boot

Displays system standby manual boot option

__readonly__

(Optional)

content

(Optional) Displays system standby manual boot option

Command Mode

- /exec

show system switch-mode

show system switch-mode [ __readonly__ <op_mode> ]

Syntax Description

show

Show running system information

system

System-related show commands

switch-mode

Show current operational mode of the switch

__readonly__

(Optional)

op_mode

(Optional) Operational Mode

Command Mode

- /exec

show system switchover impact

show system switchover impact [ <uri0> [ <uri1> ] ]

Syntax Description

show

Show running system information

system

System-related show commands

switchover

Show the software switchover impact between two images

impact

impact {standby_system_uri} {active_system_uri}

uri0

(Optional) Enter standby URI

uri1

(Optional) Enter active URI

Command Mode

- /exec

show system uptime

show system uptime [ __readonly__ { <sys_st_time> <sys_up_days> <sys_up_hrs> <sys_up_mins> <sys_up_secs> <kn_up_days> <kn_up_hrs> <kn_up_mins> <kn_up_secs> [ <as_up_days> ] [ <as_up_hrs> ] [ <as_up_mins> ] [ <as_up_secs> ] } ]

Syntax Description

show

Show running system information

system

System-related show commands

uptime

Show how long the system has been up and running

__readonly__

(Optional) readonly

sys_st_time

(Optional) System Start Time

sys_up_days

(Optional) System Uptime Days

sys_up_hrs

(Optional) System Uptime Hours

sys_up_mins

(Optional) System Uptime Minutes

sys_up_secs

(Optional) System Uptime Seconds

kn_up_days

(Optional) Kernel Uptime Days

kn_up_hrs

(Optional) Kernel Uptime Hours

kn_up_mins

(Optional) Kernel Uptime Minutes

kn_up_secs

(Optional) Kernel Uptime Seconds

as_up_days

(Optional) Active Sup Uptime Days

as_up_hrs

(Optional) Active Sup Uptime Hours

as_up_mins

(Optional) Active Sup Uptime Minutes

as_up_secs

(Optional) Active Sup Uptime Seconds

Command Mode

- /exec

show system verify bios flash

show system verify bios { flash <i0> [ module <module> ] | protection <i1> [ module <module1> ] } [ __readonly__ { <return> <verify_result> <protection_status> } ]

Syntax Description

show

Show running system information

system

System-related show commands

verify

Verify commands

bios

Verify bios

flash

verify bios flash or protection status

i0

Select primary or alternate flash

module

(Optional) Module number

module

(Optional) Enter module number

protection

verify bios flash or protection status

i1

Select primary or alternate flash

module

(Optional) Module number

module1

(Optional) Enter module number

__readonly__

(Optional)

return

(Optional)

verify_result

(Optional)

protection_status

(Optional)

Command Mode

- /exec

show system vlan reserved

show system vlan reserved [ __readonly__ { TABLE_vlan <current_reserved_vlan_start> <current_reserved_vlan_end> [ <future_reserved_vlan_start> ] [ <future_reserved_vlan_end> ] } ]

Syntax Description

show

Show running system information

system

system wide configuration

vlan

VLAN status

reserved

Show system VLAN allocation

__readonly__

(Optional) Read Only

TABLE_vlan

(Optional)

current_reserved_vlan_start

(Optional) System current running reserved vlan start

current_reserved_vlan_end

(Optional) System current running reserved vlan end

future_reserved_vlan_start

(Optional) System future running reserved vlan start

future_reserved_vlan_end

(Optional) System future running reserved vlan end

Command Mode

- /exec

Chapter 20. T Show Commands

- show table-map

- show tacacs-server

- show tacacs-server

- show tacacs-server directed-request

- show tacacs-server groups

- show tacacs-server sorted

- show tacacs-server statistics

- show tech-support

- show tech-support aaa

- show tech-support aclmgr

- show tech-support aclmgr compressed

- show tech-support aclqos

- show tech-support aclqos compressed

- show tech-support adjmgr

- show tech-support all-binary

- show tech-support all

- show tech-support all binary

- show tech-support analytics

- show tech-support arp

- show tech-support ascii-cfg

- show tech-support assoc_mgr

- show tech-support backup

- show tech-support bcm

- show tech-support bfd

- show tech-support bgp

- show tech-support biosd

- show tech-support bloggerd-all

- show tech-support bloggerd

- show tech-support bootvar

- show tech-support brief

- show tech-support callhome

- show tech-support cdp

- show tech-support cert-enroll

- show tech-support cfs

- show tech-support cli

- show tech-support clis

- show tech-support clock_manager

- show tech-support commands

- show tech-support controller

- show tech-support copp

- show tech-support dcbx

- show tech-support details

- show tech-support dhclient

- show tech-support dhcp

- show tech-support dme

- show tech-support dot1x

- show tech-support ecp

- show tech-support eem

- show tech-support eigrp

- show tech-support eltm

- show tech-support ethpm

- show tech-support ethport

- show tech-support evb

- show tech-support fabric forwarding

- show tech-support fabric multicast

- show tech-support fast-reload

- show tech-support fc2

- show tech-support fcoe

- show tech-support fips

- show tech-support forwarding l2 multicast

- show tech-support forwarding l2 multicast vdc-all

- show tech-support forwarding l2 unicast

- show tech-support forwarding l3 multicast

- show tech-support forwarding l3 multicast detail vdc-all

- show tech-support forwarding l3 multicast detail

- show tech-support forwarding l3 multicast vdc-all

- show tech-support forwarding l3 unicast

- show tech-support forwarding l3 unicast detail

- show tech-support forwarding l3 unicast detail vdc-all

- show tech-support forwarding l3 unicast vdc-all

- show tech-support forwarding mpls

- show tech-support forwarding multicast

- show tech-support gold

- show tech-support gpixm

- show tech-support ha

- show tech-support ha module

- show tech-support ha standby

- show tech-support hardware-telemetry

- show tech-support hsrp

- show tech-support hsrp brief

- show tech-support icam

- show tech-support icmpv6

- show tech-support im

- show tech-support imp

- show tech-support inband counters

- show tech-support include-time

- show tech-support install

- show tech-support interface-vlan

- show tech-support ip

- show tech-support ip igmp

- show tech-support ip igmp snooping

- show tech-support ip msdp

- show tech-support ip pim

- show tech-support ipqos

- show tech-support ipv6

- show tech-support ipv6 mld

- show tech-support ipv6 multicast

- show tech-support ipv6 pim

- show tech-support isis

- show tech-support issu

- show tech-support kstack

- show tech-support l2

- show tech-support l2fm

- show tech-support l2fm clients

- show tech-support l2fm detail

- show tech-support l2fm l2dbg

- show tech-support l2fm l2dbg

- show tech-support l2rib

- show tech-support l3vm

- show tech-support l3vpn

- show tech-support lacp

- show tech-support ldap

- show tech-support license

- show tech-support lim

- show tech-support lldp

- show tech-support logging

- show tech-support m2rib

- show tech-support macsec

- show tech-support macsec detail

- show tech-support mfwd

- show tech-support mmode

- show tech-support module

- show tech-support module all

- show tech-support monitor

- show tech-support monitor erspan

- show tech-support monitorc-all

- show tech-support mpls ldp

- show tech-support mpls manager

- show tech-support mpls static

- show tech-support mpls strip

- show tech-support mpls switching

- show tech-support mpls traffic-eng

- show tech-support mplsfwd

- show tech-support multicast-vxlan-evpn

- show tech-support multicast

- show tech-support mvpn

- show tech-support nat

- show tech-support nbm

- show tech-support netflow

- show tech-support netstack

- show tech-support netstack detail

- show tech-support ngoam

- show tech-support npacl

- show tech-support npv

- show tech-support ns

- show tech-support ntp

- show tech-support nve

- show tech-support nxapi

- show tech-support nxsdk

- show tech-support object-store

- show tech-support openflow

- show tech-support ospf

- show tech-support ospfv3

- show tech-support page

- show tech-support patch

- show tech-support pbr

- show tech-support pfstat

- show tech-support pixm-all

- show tech-support pixm

- show tech-support pixmc-all

- show tech-support pktmgr

- show tech-support platform-sdk

- show tech-support platform

- show tech-support platform

- show tech-support plb-services

- show tech-support plcmgr

- show tech-support pltfm-config

- show tech-support poe

- show tech-support port-channel

- show tech-support port-client-all

- show tech-support port-profile

- show tech-support port-security

- show tech-support port

- show tech-support private-vlan

- show tech-support ptp

- show tech-support radius

- show tech-support rip

- show tech-support routing

- show tech-support routing ipv6

- show tech-support routing ipv6 multicast

- show tech-support routing multicast

- show tech-support rpm

- show tech-support sal

- show tech-support san-port-channel

- show tech-support san

- show tech-support satmgr

- show tech-support security

- show tech-support segment-routing

- show tech-support services

- show tech-support session-mgr

- show tech-support sflow

- show tech-support single-jericho

- show tech-support sksd

- show tech-support sla responder

- show tech-support sla sender

- show tech-support sla twamp-server

- show tech-support smartc

- show tech-support smm

- show tech-support snmp

- show tech-support sockets

- show tech-support spm

- show tech-support srte

- show tech-support statsclient

- show tech-support stp

- show tech-support sup-filesys

- show tech-support sysmgr

- show tech-support tacacs

- show tech-support telemetry

- show tech-support track

- show tech-support tunnel

- show tech-support u2rib

- show tech-support udld

- show tech-support usd-all

- show tech-support vdc

- show tech-support virtual-service

- show tech-support vlan

- show tech-support vmtracker

- show tech-support vpc

- show tech-support vrrp

- show tech-support vrrp brief

- show tech-support vrrpv3

- show tech-support vsan

- show tech-support vshd

- show tech-support vtp

- show tech-support vvlan

- show tech-support xbar

- show tech-support xml

- show tech-support xos

- show telemetry control database

- show telemetry data collector brief

- show telemetry event collector stats

- show telemetry pipeline stats

- show telemetry transport

- show telnet server

- show terminal

- show terminal output xml version

- show time-range

- show time-stamp running-config last-changed

- show track

- show track brief

- show troubleshoot l2 mac vlan

- show troubleshoot l3 ipv4 vrf

- show trunk protocol

- show ttag brief

- show ttag brief

- show tunnel iftable

- show tunnel inetconfigtable

show table-map

show table-map [ <tmap-name> | <default-tmap-enum-name> ] [ __readonly__ { [ TABLE_tmap <tmap-name> [ <desc> ] [ <def-value> ] [ <def-copy> ] [ <def-ignore> ] [ TABLE_list <frm-list> <to-val> ] ] } ]

Syntax Description

show

Show running system information

table-map

Table maps

TABLE_tmap

(Optional) all tmap xml sessions

tmap-name

(Optional) Show a particular table map

default-tmap-enum-name

(Optional)

__readonly__

(Optional)

desc

(Optional) Description string

def-value

(Optional) Unspecified entries will default to this value

def-copy

(Optional) Map unspecified values to equivalent output value

def-ignore

(Optional) Ignore unspecified values

TABLE_list

(Optional) table map lists

frm-list

(Optional) Original list of values which are to be mapped

to-val

(Optional) To value

Command Mode

- /exec

show tacacs-server

show tacacs-server [ __readonly__ [ <global_secretKey> ] { <global_timeout> <global_deadtime> } [ <global_source_intf> ] [ <global_idle_time> ] { [ <global_testUsername> ] [ <global_testPassword> ] } { <server_count> } [ TABLE_server <server_ip> <port> [ <secretKey> ] [ <timeout> ] ] [ { <host0> <tacacs_port> <shared_key> <idle_time><test_username> <test_password> } + ] ]

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

__readonly__

(Optional)

global_secretKey

(Optional) Global shared secret

global_timeout

(Optional) Global timeout for tacacs

global_deadtime

(Optional) Global deadtime

global_source_intf

(Optional) Tacacs global source interface

global_idle_time

(Optional) Tacacs global idle-time for server monitoring

global_testUsername

(Optional) Username of global test parameters

global_testPassword

(Optional) Password of global test parameters

server_count

(Optional) Total number of tacacs servers configured

TABLE_server

(Optional)

server_ip

(Optional) Ip address of the server

port

(Optional) Port used for this server

secretKey

(Optional) Shared secret between the server and the tacacs client

timeout

(Optional) Timeout for this tacacs server

host0

(Optional) DNS name or IP address

tacacs_port

(Optional) TACACS+ server port

shared_key

(Optional) TACACS+ shared secret

test_password

(Optional) User password in test packets

Command Mode

- /exec

show tacacs-server

show tacacs-server { <host0> } [ __readonly__ { <host1> } [ <tac_port> ] [ <tac_shared_key> ] [ <time_out> ] [ <tac_idle_time> ] [ <test_user_name> ] <test_pwd> ]

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

host0

DNS name or IP address

__readonly__

(Optional)

host1

(Optional) DNS name or IP address

tac_port

(Optional) TACACS+ server port

tac_shared_key

(Optional) TACACS+ shared secret

time_out

(Optional) radius server timeout

test_user_name

(Optional) User name in test packets

test_pwd

(Optional) User password in test packets

tac_idle_time

(Optional) Time interval for monitoring the server

Command Mode

- /exec

show tacacs-server directed-request

show tacacs-server directed-request [ __readonly__ { <tacacs_directedRequest_status> } ]

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

directed-request

Show directed server enable configuration

__readonly__

(Optional)

tacacs_directedRequest_status

(Optional) status of tacacs-server directed request

Command Mode

- /exec

show tacacs-server groups

show tacacs-server groups [ <s0> ] [ __readonly__ [ <num_of_groups> ] [ TABLE_group <group_name> [ TABLE_server <server_ip> [ <port> ] ] [ <dead_time> ] [ <vrf_name> ] [ <source_interface> ] ] ]

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

groups

Show TACACS+ server group configuration information

s0

(Optional) TACACS+ server group name

__readonly__

(Optional)

num_of_groups

(Optional) number of groups

TABLE_group

(Optional)

group_name

(Optional) name of the group

TABLE_server

(Optional)

server_ip

(Optional) DNS name or IP address

port

(Optional) TACACS+ server port

dead_time

(Optional) Time interval for which the server is marked as dead before sending a test command

vrf_name

(Optional) name of the vrf

source_interface

(Optional) Interface Description

Command Mode

- /exec

show tacacs-server sorted

show tacacs-server sorted [ __readonly__ [ <global_secretKey> ] { <global_timeout> <global_deadtime> } [ <global_source_intf> ] [ <global_idle_time> ] { [ <global_testUsername> ] [ <global_testPassword> ] } { <server_count> } [ TABLE_server <server_ip> <port> [ <secretKey> ] [ <timeout> ] ] ]

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

sorted

Show TACACS+ servers sorted by server name

__readonly__

(Optional)

global_secretKey

(Optional) Global shared secret

global_timeout

(Optional) Global timeout for tacacs

global_deadtime

(Optional) Global deadtime

global_source_intf

(Optional) Tacacs global source interface

global_idle_time

(Optional) Tacacs global idle-time for server monitoring

global_testUsername

(Optional) Username of global test parameters

global_testPassword

(Optional) Password of global test parameters

server_count

(Optional) Total number of tacacs servers configured

TABLE_server

(Optional)

server_ip

(Optional) Ip address of the server

port

(Optional) Port used for this server

secretKey

(Optional) Shared secret between the server and the tacacs client

timeout

(Optional) Timeout for this tacacs server

Command Mode

- /exec

show tacacs-server statistics

show tacacs-server statistics { <host0> } [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } { autho_statistics <autho_failed_transactions> <autho_succ_transactions> <autho_req_sent> <autho_req_timedout> <autho_resp_no_match> <autho_resp_not_processed> <autho_resp_error> } { acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> } ]

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

statistics

Show TACACS statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

autho_statistics

(Optional) Authorization Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

autho_failed_transactions

(Optional) Authorization: Failed transactions

autho_succ_transactions

(Optional) Authorization: Successful transactions

autho_req_sent

(Optional) Authorization: Requests sent

autho_req_timedout

(Optional) Authorization: Requests timedout

autho_resp_no_match

(Optional) Authorization: Responses with no matching requests

autho_resp_not_processed

(Optional) Authorization: Responses not processed

autho_resp_error

(Optional) Authorization: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

show tech-support

show tech-support [ time-optimized ] [ forced ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

time-optimized

(Optional) Gather tech-support faster, requires more memory and disk space

forced

(Optional) Do not check for standby being present

Command Mode

- /exec

show tech-support aaa

show tech-support aaa

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

aaa

Display aaa information

Command Mode

- /exec

show tech-support aclmgr

show tech-support aclmgr [ detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

aclmgr

ACL commands

detail

(Optional) Detailed Tech Support

Command Mode

- /exec

show tech-support aclmgr compressed

show tech-support aclmgr compressed <uri0> [ detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

aclmgr

ACL commands

compressed

Save compressed aclqos technical support

uri0

Enter filename to store

detail

(Optional) Detailed Tech Support

Command Mode

- /exec

show tech-support aclqos

show tech-support aclqos

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

aclqos

Show information for aclqos technical support

Command Mode

- /exec

show tech-support aclqos compressed

show tech-support aclqos compressed <uri0>

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

aclqos

Show information for aclqos technical support

compressed

Save compressed aclqos technical support

uri0

Enter filename to store

Command Mode

- /exec

show tech-support adjmgr

show tech-support adjmgr [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

adjmgr

Display Adjmgr information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support all-binary

show tech-support all-binary

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

all-binary

Dump tech support for all applications in binary

Command Mode

- /exec

show tech-support all

show tech-support all [ non-time-optimized ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

all

Gather detailed information for troubleshooting

non-time-optimized

(Optional) Gather detailed information for troubleshooting (legacy behavior)

Command Mode

- /exec

show tech-support all binary

show tech-support all binary <uri0>

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

all

Gather detailed information for troubleshooting

binary

Gather tech support for all applications in binary format

uri0

Select destination filesystem to save the binary output (NOTE: The output file name will be automatically generated and cannot be chosen)

Command Mode

- /exec

show tech-support analytics

show tech-support analytics [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

analytics

Show Analytics tech-support information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support arp

show tech-support arp [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

arp

Display ARP information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ascii-cfg

show tech-support ascii-cfg

Syntax Description

show

Show running system information

tech-support

Show information for technical support personnel

ascii-cfg

Show ascii-cfg information for technical support personnel

Command Mode

- /exec

show tech-support assoc_mgr

show tech-support assoc_mgr

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

assoc_mgr

Gather detailed information for assoc_mgr troubleshooting

Command Mode

- /exec

show tech-support backup

show tech-support { backup | flexlink }

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

backup

Gather detailed information for Switchport Backup troubleshooting

flexlink

Gather detailed information for Switchport Backup troubleshooting

Command Mode

- /exec

show tech-support bcm

show tech-support bcm

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bcm

bcm hardware info

Command Mode

- /exec

show tech-support bfd

show tech-support bfd

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bfd

BFD commands

Command Mode

- /exec

show tech-support bgp

show tech-support bgp [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bgp

Display BGP status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support biosd

show tech-support biosd

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

biosd

Gather bios install log for trouble shooting

Command Mode

- /exec

show tech-support bloggerd-all

show tech-support bloggerd-all

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bloggerd-all

Gather detailed information for bloggerd troubleshooting from ALL modules

Command Mode

- /exec

show tech-support bloggerd

show tech-support bloggerd

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bloggerd

Gather detailed information for bloggerd troubleshooting

Command Mode

- /exec

show tech-support bootvar

show tech-support bootvar

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bootvar

Gather detailed information for bootvar troubleshooting

Command Mode

- /exec

show tech-support brief

show tech-support brief

Syntax Description

show

Show running system summary information

tech-support

Gather information for troubleshooting

brief

Gather summary information for troubleshooting

Command Mode

- /exec

show tech-support callhome

show tech-support callhome

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

callhome

callhome troubleshooting information

Command Mode

- /exec

show tech-support cdp

show tech-support cdp

Syntax Description

show

show running system information

tech-support

Gather information for troubleshooting

cdp

Gather information for CDP trouble shooting

Command Mode

- /exec

show tech-support cert-enroll

show tech-support cert-enroll

Syntax Description

show

show commands

tech-support

Gather information for troubleshooting

cert-enroll

Display certificates information

Command Mode

- /exec

show tech-support cfs

show tech-support cfs [ { commands | name <cfs-dyn-app-name> [ commands1 ] } ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

cfs

Gather detailed information for cfs troubleshooting

commands

(Optional) CFS show tech commands

name

(Optional) Gather detailed information of cfs for a specified application

cfs-dyn-app-name

(Optional) Registered name of the local application

commands1

(Optional) CFS application show tech commands

Command Mode

- /exec

show tech-support cli

show tech-support cli

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

cli

Gather information for parser troubleshooting

Command Mode

- /exec

show tech-support clis

show tech-support clis [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

clis

Gather information for CLI Server troubleshooting

brief

(Optional) Detailed information

Command Mode

- /exec

show tech-support clock_manager

show tech-support clock_manager

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

clock_manager

Gather detailed information for clock manager troubleshooting

Command Mode

- /exec

show tech-support commands

show tech-support commands

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

commands

Show commands executed as part of show tech-support commands

Command Mode

- /exec

show tech-support controller

show tech-support controller

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

controller

Gather information for Controller troubleshooting

Command Mode

- /exec

show tech-support copp

show tech-support copp

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

copp

Gather information for copp trouble shooting

Command Mode

- /exec

show tech-support dcbx

show tech-support dcbx

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

dcbx

Gather detailed information for DCBX component

Command Mode

- /exec

show tech-support details

show tech-support details [ space-optimized ] [ time-optimized ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

details

Gather detailed information for troubleshooting

space-optimized

(Optional) Gather tech-support info. using less memory and disk space

time-optimized

(Optional) Gather tech-support faster, requires more memory and disk space

Command Mode

- /exec

show tech-support dhclient

show tech-support dhclient

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

dhclient

Gather information for dhclient trouble shooting

Command Mode

- /exec

show tech-support dhcp

show tech-support dhcp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

dhcp

Gather detailed information for dhcp troubleshooting

Command Mode

- /exec

show tech-support dme

show tech-support dme

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

dme

Gather detailed information for dme troubleshooting

Command Mode

- /exec

show tech-support dot1x

show tech-support dot1x

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

dot1x

Display dot1x information

Command Mode

- /exec

show tech-support ecp

show tech-support ecp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ecp

ECP (Edge Control Protocol)

Command Mode

- /exec

show tech-support eem

show tech-support eem

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

eem

Show EEM tech-support information

Command Mode

- /exec

show tech-support eigrp

show tech-support eigrp [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

eigrp

Display EIGRP status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support eltm

show tech-support eltm [ detail ]

Syntax Description

show

show tech-support

tech-support

Gather information for trouble-shooting

eltm

eltm debug info

detail

(Optional) Detailed information

Command Mode

- /exec

show tech-support ethpm

show tech-support ethpm

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ethpm

Gather detailed information for ETHPM troubleshooting

Command Mode

- /exec

show tech-support ethport

show tech-support ethport

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ethport

Gather detailed information for ETHPORT troubleshooting

Command Mode

- /exec

show tech-support evb

show tech-support evb

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

evb

EVB (Edge Virtual Bridge)

Command Mode

- /exec

show tech-support fabric forwarding

show tech-support fabric forwarding

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

Command Mode

- /exec

show tech-support fabric multicast

show tech-support fabric multicast

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fabric

Fabric

multicast

Multicast information

Command Mode

- /exec

show tech-support fast-reload

show tech-support fast-reload

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fast-reload

Gather information for troubleshooting fast-reload timings

Command Mode

- /exec

show tech-support fc2

show tech-support fc2 [ commands ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fc2

Show information for fc2 technical support

commands

(Optional) Show commands run as part of fc2 technical support

Command Mode

- /exec

show tech-support fcoe

show tech-support fcoe

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fcoe

Gather information for FCOE mgr trouble shooting

Command Mode

- /exec

show tech-support fips

show tech-support fips

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fips

show tech support information for security

Command Mode

- /exec

show tech-support forwarding l2 multicast

show tech-support forwarding l2 multicast

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l2

layer 2 debug information

multicast

multicast

Command Mode

- /exec

show tech-support forwarding l2 multicast vdc-all

show tech-support forwarding l2 multicast vdc-all

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l2

layer 2 debug information

multicast

multicast

vdc-all

vdc-all

Command Mode

- /exec

show tech-support forwarding l2 unicast

show tech-support forwarding l2 unicast [ module <module> ]

Syntax Description

show

show tech-support

tech-support

Gather information for trouble-shooting

forwarding

Forwarding debug info

l2

layer 2 debug info

unicast

unicast

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support forwarding l3 multicast

show tech-support forwarding l3 multicast

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l3

layer 3 debug information

multicast

multicast

Command Mode

- /exec

show tech-support forwarding l3 multicast detail vdc-all

show tech-support forwarding l3 multicast detail vdc-all

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l3

layer 3 debug information

multicast

multicast

detail

detail

vdc-all

vdc-all

Command Mode

- /exec

show tech-support forwarding l3 multicast detail

show tech-support forwarding l3 multicast detail

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l3

layer 3 debug information

multicast

multicast

detail

detail

Command Mode

- /exec

show tech-support forwarding l3 multicast vdc-all

show tech-support forwarding l3 multicast vdc-all

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l3

layer 3 debug information

multicast

multicast

vdc-all

vdc-all

Command Mode

- /exec

show tech-support forwarding l3 unicast

show tech-support forwarding l3 unicast [ module <module> ]

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l3

layer 3 debug information

unicast

unicast

module

(Optional) module

module

(Optional) module number

Command Mode

- /exec

show tech-support forwarding l3 unicast detail

show tech-support forwarding l3 unicast detail [ module <module> ]

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l3

layer 3 debug information

unicast

unicast

detail

detailed show tech including platform commands

module

(Optional) module

module

(Optional) module number

Command Mode

- /exec

show tech-support forwarding l3 unicast detail vdc-all

show tech-support forwarding l3 unicast detail vdc-all [ module <module> ]

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l3

layer 3 debug information

unicast

unicast

detail

detailed show tech including platform commands

vdc-all

vdc-all

module

(Optional) module

module

(Optional) module number

Command Mode

- /exec

show tech-support forwarding l3 unicast vdc-all

show tech-support forwarding l3 unicast vdc-all [ module <module> ]

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

l3

layer 3 debug information

unicast

unicast

vdc-all

vdc-all

module

(Optional) module

module

(Optional) module number

Command Mode

- /exec

show tech-support forwarding mpls

show tech-support forwarding mpls [ module <module> ]

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

mpls

mpls related information

module

(Optional) module

module

(Optional) module number

Command Mode

- /exec

show tech-support forwarding multicast

show tech-support forwarding multicast [ module <module> ]

Syntax Description

show

tech-support

tech-support information

forwarding

forwarding debug information

multicast

multicast

module

(Optional) module

module

(Optional) module number

Command Mode

- /exec

show tech-support gold

show tech-support gold

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

gold

Show gold tech-support information

Command Mode

- /exec

show tech-support gpixm

show tech-support gpixm

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

gpixm

Gather detailed information for GLOBAL-PIXM troubleshooting

Command Mode

- /exec

show tech-support ha

show tech-support ha [ commands ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ha

Gather detailed information for HA troubleshooting

commands

(Optional) Show commands executed as part of show tech-support ha commands

Command Mode

- /exec

show tech-support ha module

show tech-support ha module <module>

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ha

Gather detailed information for HA troubleshooting

module

Gather info related to a module

module

Enter module number

Command Mode

- /exec

show tech-support ha standby

show tech-support ha standby [ commands ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ha

Gather detailed information for HA troubleshooting

standby

Gather detailed information for HA troubleshooting from standby supervisor

commands

(Optional) Show commands executed as part of show tech-support ha commands

Command Mode

- /exec

show tech-support hardware-telemetry

show tech-support hardware-telemetry

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

hardware-telemetry

Hardware Telemetry Information

Command Mode

- /exec

show tech-support hsrp

show tech-support hsrp

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

hsrp

Show hsrp tech-support information

Command Mode

- /exec

show tech-support hsrp brief

show tech-support hsrp brief

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

hsrp

Show hsrp tech-support information

brief

Show tech-support information in brief

Command Mode

- /exec

show tech-support icam

show tech-support icam [ detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

icam

icam - TCAM Analytics

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support icmpv6

show tech-support icmpv6 [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

icmpv6

Display Icmpv6 information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support im

show tech-support im

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

im

Gather detailed information for IM troubleshooting

Command Mode

- /exec

show tech-support imp

show tech-support imp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

imp

IMP commands

Command Mode

- /exec

show tech-support inband counters

show tech-support inband counters

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

inband

Gather all information about inband data path

counters

Gather all counters in inband data path

Command Mode

- /exec

show tech-support include-time

show tech-support include-time

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

include-time

Gather tech-support and capture time taken to execute each command

Command Mode

- /exec

show tech-support install

show tech-support install

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

install

Gather detailed information for rpm/package install operation

Command Mode

- /exec

show tech-support interface-vlan

show tech-support interface-vlan

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

interface-vlan

Gather detailed information for interface-vlan troubleshooting

Command Mode

- /exec

show tech-support ip

show tech-support ip [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip igmp

show tech-support ip igmp [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

igmp

Display IGMP status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip igmp snooping

show tech-support ip igmp snooping [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip msdp

show tech-support ip msdp [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

msdp

Display MSDP status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip pim

show tech-support ip pim [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

pim

PIM global configuration commands

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ipqos

show tech-support ipqos [ server-only ] [ all ] [ snmp ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

server-only

(Optional) Dump the tech-support information only from IP QoS Manager server only

all

(Optional) Dump the tech-support information IP QoS Manager plus brief summary of system

snmp

(Optional) Dump the tech-support information only from IP QoS Manager server only (SNMP only)

Command Mode

- /exec

show tech-support ipv6

show tech-support ipv6 [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ipv6

Display IPV6 information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ipv6 mld

show tech-support ipv6 mld [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ipv6

Display IPv6 information

mld

Display Multicast Listener Discovery information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ipv6 multicast

show tech-support ipv6 multicast

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ipv6

Display IPv6 information

multicast

Display V6 Multicast information

Command Mode

- /exec

show tech-support ipv6 pim

show tech-support ipv6 pim [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ipv6

Display IPv6 information

pim

PIM6 global configuration commands

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support isis

show tech-support isis [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

isis

IS-IS events

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support issu

show tech-support issu [ commands ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

issu

Gather detailed information for issu troubleshooting

commands

(Optional) Show commands executed as part of show tech-support issu command

Command Mode

- /exec

show tech-support kstack

show tech-support kstack

Syntax Description

show

tech-support

tech-support information

kstack

kstack information

Command Mode

- /exec

show tech-support l2

show tech-support l2

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l2

Gather detailed information for layer 2 troubleshooting

Command Mode

- /exec

show tech-support l2fm

show tech-support l2fm

Syntax Description

show

show tech-support

tech-support

Gather information for trouble-shooting

l2fm

l2fm debug info

Command Mode

- /exec

show tech-support l2fm clients

show tech-support l2fm clients [ module <module> ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l2fm

l2fm debug info

clients

debug info of l2fm clients only running on linecard(mtm)

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support l2fm detail

show tech-support l2fm detail [ module <module> ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l2fm

l2fm debug info

detail

All info related to l2fm

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support l2fm l2dbg

show tech-support l2fm l2dbg [ module <module> ]

Syntax Description

show

show tech-support

tech-support

Gather information for trouble-shooting

l2fm

l2fm debug info

l2dbg

tech support capturing additional debug info for l2fm(l2dbg)

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support l2fm l2dbg

show tech-support l2fm l2dbg [ module <module> ]

Syntax Description

show

show tech-support

tech-support

Gather information for trouble-shooting

l2fm

l2fm debug info

l2dbg

tech support capturing additional debug info for l2fm(l2dbg)

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support l2rib

show tech-support l2rib

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l2rib

Display L2RIB information

Command Mode

- /exec

show tech-support l3vm

show tech-support l3vm [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l3vm

Display VRF information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support l3vpn

show tech-support l3vpn [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l3vpn

BGP l3vpn information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support lacp

show tech-support lacp [ all ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

lacp

Gather detailed information for LACP component

all

(Optional) Gather detailed information of LACP and related components

Command Mode

- /exec

show tech-support ldap

show tech-support ldap

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

ldap

Display ldap information

Command Mode

- /exec

show tech-support license

show tech-support license

Syntax Description

show

show commands

tech-support

Gather information for troubleshooting

license

Display licensing information

Command Mode

- /exec

show tech-support lim

show tech-support lim

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

lim

Gather detailed information for LIM troubleshooting

Command Mode

- /exec

show tech-support lldp

show tech-support lldp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

lldp

Gather detailed information for LLDP troubleshooting

Command Mode

- /exec

show tech-support logging

show tech-support logging

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

logging

Show information on logging for technical support staff

Command Mode

- /exec

show tech-support m2rib

show tech-support m2rib

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

m2rib

Gather detailed information for M2RIB troubleshooting

Command Mode

- /exec

show tech-support macsec

show tech-support macsec

Syntax Description

tech-support

Gather information for troubleshooting

macsec

Gather information for macsec troubleshooting

Command Mode

- /exec

show tech-support macsec detail

show tech-support macsec detail [ module <module> ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

macsec

macsec debug info

detail

All info related to MACsec

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support mfwd

show tech-support mfwd [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mfwd

Display MCASTFWD status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support mmode

show tech-support mmode

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mmode

Gather information for troubleshooting mmode

Command Mode

- /exec

show tech-support module

show tech-support module <module>

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

module

Gather info related to a module

module

Enter module number

Command Mode

- /exec

show tech-support module all

show tech-support module all

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

module

Gather info related to a module

all

Gather info related to all modules in the system

Command Mode

- /exec

show tech-support monitor

show tech-support monitor

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

monitor

Gather detailed information for monitor troubleshooting

Command Mode

- /exec

show tech-support monitor erspan

show tech-support monitor erspan

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

monitor

Gather detailed information for monitor troubleshooting

erspan

Gather detailed information for erspan session troubleshooting

Command Mode

- /exec

show tech-support monitorc-all

show tech-support monitorc-all

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

monitorc-all

Gather detailed information for LC MONITORC troubleshooting

Command Mode

- /exec

show tech-support mpls ldp

show tech-support mpls ldp [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mpls

Display MPLS status and configuration

ldp

Display LDP configuration and status for troubleshooting

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support mpls manager

{ show tech-support mpls manager }

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mpls

MPLS

manager

MPLS-Mgr

Command Mode

- /exec

show tech-support mpls static

show tech-support mpls static [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mpls

Display MPLS status and configuration

static

Display STATIC configuration and status for troubleshooting

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support mpls strip

show tech-support mpls strip

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

mpls

MPLS

strip

Gather MPLS label strip troubleshooting info

Command Mode

- /exec

show tech-support mpls switching

show tech-support mpls switching

Syntax Description

show

Show running system information

tech-support

Gather MPLS switching information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

Command Mode

- /exec

show tech-support mpls traffic-eng

show tech-support mpls traffic-eng [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support mplsfwd

show tech-support mplsfwd [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mplsfwd

Display MPLS forwarding information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support multicast-vxlan-evpn

show tech-support multicast-vxlan-evpn

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

multicast-vxlan-evpn

Multicast VxLAN EVPN feature

Command Mode

- /exec

show tech-support multicast

show tech-support [ ip | ipv4 ] multicast

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

multicast

Display V4 Multicast information

Command Mode

- /exec

show tech-support mvpn

show tech-support mvpn [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mvpn

Display Multicast VPN information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support nat

show tech-support nat

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

nat

Gather information for troubleshooting NAT

Command Mode

- /exec

show tech-support nbm

show tech-support nbm [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble-shooting

nbm

Non Blocking Multicast

brief

(Optional) Minimal information

Command Mode

- /exec

show tech-support netflow

show tech-support netflow [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

netflow

Show NetFlow tech-support information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support netstack

show tech-support netstack

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

netstack

Gather information for NETSTACK troubleshooting

Command Mode

- /exec

show tech-support netstack detail

show tech-support netstack detail

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

netstack

Gather information for NETSTACK troubleshooting

detail

Gather detailed information for NETSTACK troubleshooting

Command Mode

- /exec

show tech-support ngoam

show tech-support ngoam

Syntax Description

show

Show running system information

tech-support

Gather information for trouble-shooting

ngoam

ngoam

Command Mode

- /exec

show tech-support npacl

show tech-support npacl [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

npacl

Display npacl information

brief

(Optional) Brief npacl information

Command Mode

- /exec

show tech-support npv

show tech-support npv

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

npv

Show information for NPV technical support staff

Command Mode

- /exec

show tech-support ns

show tech-support ns

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ns

Gather detailed information for northstar asic

Command Mode

- /exec

show tech-support ntp

show tech-support ntp

Syntax Description

show

show running system information

tech-support

Gather information for trouble shooting

ntp

Gather information for NTP trouble shooting

Command Mode

- /exec

show tech-support nve

show tech-support nve

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

nve

Display NVE information

Command Mode

- /exec

show tech-support nxapi

show tech-support nxapi

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

nxapi

Gather detailed information for nxapi troubleshooting

Command Mode

- /exec

show tech-support nxsdk

show tech-support nxsdk

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

nxsdk

NXOS SDK

Command Mode

- /exec

show tech-support object-store

show tech-support object-store

Syntax Description

show

Show Object Store

tech-support

Gather information for troubleshooting

object-store

Gather information from object store for Controller troubleshooting

Command Mode

- /exec

show tech-support openflow

show tech-support openflow [ brief | detailed ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

openflow

Show tech support for OpenFlow

brief

(Optional) Brief information

detailed

(Optional) Detailed information

Command Mode

- /exec

show tech-support ospf

show tech-support ospf [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ospf

Display OSPF status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ospfv3

show tech-support ospfv3 [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ospfv3

Display OSPFv3 status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support page

show tech-support page [ time-optimized ] [ forced ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

page

Page through the output

time-optimized

(Optional) Gather tech-support faster, requires more memory and disk space

forced

(Optional) Do not check for standby being present

Command Mode

- /exec

show tech-support patch

show tech-support patch

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

patch

Gather detailed information for patch troubleshooting

Command Mode

- /exec

show tech-support pbr

{ show tech-support pbr }

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pbr

Display Policy Based Routing (PBR) information

Command Mode

- /exec

show tech-support pfstat

show tech-support pfstat

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pfstat

Gather detailed information for pfstat troubleshooting

Command Mode

- /exec

show tech-support pixm-all

show tech-support pixm-all

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pixm-all

Gather detailed information for PIXM troubleshooting

Command Mode

- /exec

show tech-support pixm

show tech-support pixm

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pixm

Gather detailed information for vdc-local-PIXM troubleshooting

Command Mode

- /exec

show tech-support pixmc-all

show tech-support pixmc-all

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pixmc-all

Gather detailed information for LC PIXMC troubleshooting

Command Mode

- /exec

show tech-support pktmgr

show tech-support pktmgr [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pktmgr

Display Packet Manager information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support platform-sdk

show tech-support platform-sdk

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

platform-sdk

Gather detailed information for platform-sdk troubleshooting

Command Mode

- /exec

show tech-support platform

show tech-support platform

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

platform

Get platform related information

Command Mode

- /exec

show tech-support platform

show tech-support platform

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

platform

Get platform related information

Command Mode

- /exec

show tech-support plb-services

show tech-support plb-services [ detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

plb-services

PLB Services

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support plcmgr

show tech-support plcmgr [ detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

plcmgr

Policy Manager

detail

(Optional) Print more details (e.g. messages,etc)

Command Mode

- /exec

show tech-support pltfm-config

show tech-support pltfm-config

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pltfm-config

Gather detailed information for pltfm-config troubleshooting

Command Mode

- /exec

show tech-support poe

show tech-support poe

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

poe

Gather information for PoE trouble shooting

Command Mode

- /exec

show tech-support port-channel

show tech-support port-channel

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

port-channel

Gather detailed information for port channel troubleshooting

Command Mode

- /exec

show tech-support port-client-all

show tech-support port-client-all

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

port-client-all

Gather detailed information for LC port client troubleshooting

Command Mode

- /exec

show tech-support port-profile

show tech-support port-profile

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

port-profile

Gather information for troubleshooting port-profiles

Command Mode

- /exec

show tech-support port-security

show tech-support port-security

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

port-security

Port security related command

Command Mode

- /exec

show tech-support port

show tech-support port

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

port

Gather detailed information for port manager troubleshooting

Command Mode

- /exec

show tech-support private-vlan

show tech-support private-vlan

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

private-vlan

Gather detailed information for private-vlan troubleshooting

Command Mode

- /exec

show tech-support ptp

show tech-support ptp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ptp

Gather detailed information for PTP troubleshooting

Command Mode

- /exec

show tech-support radius

show tech-support radius

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

radius

Display radius information

Command Mode

- /exec

show tech-support rip

show tech-support rip [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

rip

Display RIP routing protocol status

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support routing

show tech-support routing [ ip | ipv4 ] [ unicast ] [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast routing information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support routing ipv6

show tech-support routing ipv6 [ unicast ] [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast routing information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support routing ipv6 multicast

show tech-support routing ipv6 multicast [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

routing

Display routing information

ipv6

Display IPv6 information

multicast

Display V6 Multicast information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support routing multicast

show tech-support routing [ ip | ipv4 ] multicast [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

multicast

Display V4 Multicast information

brief

(Optional) Display brief information

Command Mode

- /exec

show tech-support rpm

{ show tech-support rpm }

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

rpm

Display Route Policy Manager (RPM) information

Command Mode

- /exec

show tech-support sal

show tech-support sal

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

sal

Show SAL tech-support information

Command Mode

- /exec

show tech-support san-port-channel

show tech-support san-port-channel

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

san-port-channel

Gather detailed information for san port channel troubleshooting

Command Mode

- /exec

show tech-support san

show tech-support san

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

san

Gather information for SAN trouble shooting

Command Mode

- /exec

show tech-support satmgr

show tech-support satmgr

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

satmgr

Gather detailed information for satmgr troubleshooting

Command Mode

- /exec

show tech-support security

show tech-support security

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

security

show tech support information for security

Command Mode

- /exec

show tech-support segment-routing

show tech-support segment-routing

Syntax Description

show

Show running system information

tech-support

Gather tech-support information

segment-routing

Segment-routing tech-support

Command Mode

- /exec

show tech-support services

show tech-support services [ detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

services

Services

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support session-mgr

show tech-support session-mgr

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

session-mgr

Gather information for troubleshooting session manager

Command Mode

- /exec

show tech-support sflow

show tech-support sflow

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

sflow

Gather detailed information for sflow feature

Command Mode

- /exec

show tech-support single-jericho

show tech-support single-jericho

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

single-jericho

Gather detailed information for single-jericho troubleshooting

Command Mode

- /exec

show tech-support sksd

show tech-support sksd

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

sksd

show tech support information for sksd

Command Mode

- /exec

show tech-support sla responder

show tech-support sla responder [ brief | detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

sla

Service Level Agreement (SLA)

responder

Configure sla-responder tech support

brief

(Optional) Show less details

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support sla sender

show tech-support sla sender [ brief | detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

sla

Service Level Agreement (SLA)

sender

Configure sla-sender tech support

brief

(Optional) Show less details

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support sla twamp-server

show tech-support sla twamp-server [ brief | detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

sla

Service Level Agreement (SLA)

twamp-server

Configure sla-twamp-server tech support

brief

(Optional) Show less details

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support smartc

show tech-support smartc [ detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

smartc

smartc channel services

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support smm

show tech-support smm

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

smm

Shared memory

Command Mode

- /exec

show tech-support snmp

show tech-support snmp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

snmp

Gather info related to snmp

Command Mode

- /exec

show tech-support sockets

show tech-support sockets [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

sockets

Display sockets status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support spm

show tech-support spm [ <application> ] [ detail ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

spm

Service Policy Manager

application

(Optional) Specify an application

detail

(Optional) Print more details (e.g. messages,etc)

Command Mode

- /exec

show tech-support srte

show tech-support srte

Syntax Description

show

Show running system information

tech-support

Gather SRTE information

srte

Segment-Routing Traffic Eng

Command Mode

- /exec

show tech-support statsclient

show tech-support statsclient [ module <module> ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

statsclient

Gather statsclient tech-support

module

(Optional) Gather info related to one module

module

(Optional) Enter module number

Command Mode

- /exec

show tech-support stp

show tech-support stp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

stp

Gather detailed information for STP troubleshooting

Command Mode

- /exec

show tech-support sup-filesys

show tech-support sup-filesys

Syntax Description

show

Show running system informatiom

tech-support

Gather information for troubleshooting

sup-filesys

File-sys related issue

Command Mode

- /exec

show tech-support sysmgr

show tech-support sysmgr [ commands ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

sysmgr

Gather detailed information for sysmgr troubleshooting

commands

(Optional) Show commands executed as part of show tech-support sysmgr

Command Mode

- /exec

show tech-support tacacs

show tech-support tacacs +

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

Command Mode

- /exec

show tech-support telemetry

show tech-support telemetry

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

telemetry

Gather information for telemetry troubleshooting

Command Mode

- /exec

show tech-support track

show tech-support track

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

track

Show track tech-support information

Command Mode

- /exec

show tech-support tunnel

show tech-support tunnel [ { commands | detail [ commands1 ] } ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

tunnel

Gather detailed information for tunnel troubleshooting

commands

(Optional) Lists commands under 'show tunnel tech-support' command

detail

(Optional) Gather detailed information for tunnel troubleshooting

commands1

(Optional) Lists commands under 'Show tech-support tunnel detail' commands

Command Mode

- /exec

show tech-support u2rib

show tech-support u2rib

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

u2rib

Gather detailed information for U2RIB troubleshooting

Command Mode

- /exec

show tech-support udld

show tech-support udld

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

udld

Gather detailed information for udld troubleshooting

Command Mode

- /exec

show tech-support usd-all

show tech-support usd-all

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

usd-all

Gather detailed information for LC USD troubleshooting

Command Mode

- /exec

show tech-support vdc

show tech-support vdc

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vdc

Gather detailed information for VDC troubleshooting

Command Mode

- /exec

show tech-support virtual-service

show tech-support virtual-service

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

virtual-service

Gather information for virtualization services trouble shooting

Command Mode

- /exec

show tech-support vlan

show tech-support vlan

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vlan

Gather detailed information for VLAN troubleshooting

Command Mode

- /exec

show tech-support vmtracker

show tech-support vmtracker

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vmtracker

VMTRACKER commands

Command Mode

- /exec

show tech-support vpc

show tech-support vpc

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vpc

Gather detailed information for VPC troubleshooting

Command Mode

- /exec

show tech-support vrrp

show tech-support vrrp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vrrp

Show information for vrrp technical support

Command Mode

- /exec

show tech-support vrrp brief

show tech-support vrrp brief

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vrrp

Show information for vrrp technical support

brief

Show information for vrrp technical support in brief

Command Mode

- /exec

show tech-support vrrpv3

show tech-support vrrpv3 [ detail ]

Syntax Description

vrrpv3

VRRPv3 configuration commands

show

Show running system information

tech-support

Gather information for trouble shooting

detail

(Optional) Detailed output

Command Mode

- /exec

show tech-support vsan

show tech-support vsan [ <i0> | commands ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vsan

Gather detailed information for vsan troubleshooting

i0

(Optional) VSAN id range

commands

(Optional) Show commands run as part of vsan technical support

Command Mode

- /exec

show tech-support vshd

show tech-support vshd

Syntax Description

show

Show running system information

tech-support

Show information for technical support

vshd

Show vshd information for technical support

Command Mode

- /exec

show tech-support vtp

show tech-support vtp

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vtp

Gather detailed information for vtp troubleshooting

Command Mode

- /exec

show tech-support vvlan

show tech-support vvlan

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vvlan

Gather detailed information for Voice VLAN troubleshooting

Command Mode

- /exec

show tech-support xbar

show tech-support xbar

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

xbar

Show xbar tech-support information

Command Mode

- /exec

show tech-support xml

show tech-support xml

Syntax Description

show

show running system information

tech-support

Gather information for trouble shooting

xml

Gather information for xml trouble shooting

Command Mode

- /exec

show tech-support xos

show tech-support xos [ brief ]

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

xos

Cross-OS Library Information and Traces

brief

(Optional) Brief information

Command Mode

- /exec

show telemetry control database

show telemetry control { database [ subscriptions | destination-groups | destinations | sensor-paths | sensor-groups ] | stats } [ __readonly__ [ <subscription_db_size> ] [ { TABLE_subscriptions <subscription_id> <data_collector_type> } ] [ <sensor_grp_db_size> ] [ { TABLE_sensor_grp <snsr_grp_row_idx> <snsr_grp_id> <snsr_grp_type> <snsr_grp_collector_type> <snsr_grp_timer_interval> <snsr_grp_timer_status> <snsr_grp_sub_count> <snsr_grp_sub_id> <snsr_grp_dc_cur_time> <snsr_grp_dc_min_time> <snsr_grp_dc_max_time> <snsr_grp_enc_cur_time> <snsr_grp_enc_min_time> <snsr_grp_enc_max_time> <snsr_grp_trans_cur_time> <snsr_grp_trans_min_time> <snsr_grp_trans_max_time> <snsr_grp_stream_cur_time> <snsr_grp_stream_min_time> <snsr_grp_stream_max_time> <snsr_grp_stream_col_id_drop> <snsr_grp_stream_last_col_id_drop> <snsr_grp_stream_col_drop> } ] [ <sensor_path_db_size> ] [ { TABLE_sensor_path <path_row_idx> <path_subscribed> <path_group_count> <path_secondary_group_count> <path_level> <path_name> <path_grp_id> <path_query_condition> <path_filter_condition> <path_gpb_cur_enc_size> <path_gpb_min_enc_size> <path_gpb_max_enc_size> <path_json_cur_enc_size> <path_json_min_enc_size> <path_json_max_enc_size> } ] [ <destination_group_db_size> ] [ <destination_group_use_vrf> ] [ { TABLE_destination_group <destination_group_id> <destination_group_refcount> } ] [ <destination_db_size> ] [ { TABLE_destinations <destination_ip> <destination_port> <destination_encoding> <destination_transport> <destination_refcount> } ] [ db_statistics <chunk_alloc_fail> <sensor_path_chunk_create_fail> <sensor_group_chunk_create_fail> <destination_chunk_create_fail> <destination_group_chunk_create_fail> <subscription_chunk_create_fail> <sensor_path_db_create_fail> <sensor_group_db_create_fail> <destination_db_create_fail> <destination_group_db_create_fail> <subscription_db_create_fail> <sensor_path_db_insert_fail> <sensor_group_db_insert_fail> <destination_db_insert_fail> <destination_group_db_insert_fail> <subscription_db_insert_fail> <sensor_path_db_delete_fail> <sensor_group_db_delete_fail> <destination_db_delete_fail> <destination_group_db_delete_fail> <subscription_db_delete_fail> <sensor_path_delete_in_use> <sensor_group_delete_in_use> <destination_delete_in_use> <destination_group_delete_in_use> <delete_destination_in_use_fail> <sensor_path_sensor_group_list_create_fail> <sensor_path_prop_list_create_fail> <sensor_path_secondary_sensor_path_list_create_fail> <sensor_path_secondary_sensor_group_list_create_fail> <sensor_group_sensor_path_list_create_fail> <sensor_group_subscription_list_create_fail> <destination_group_subscription_list_create_fail> <destination_group_destination_list_create_fail> <destination_destination_group_list_create_fail> <subscription_sensor_group_list_create_fail> <subscription_destination_group_list_create_fail> <sensor_group_sensor_path_list_delete_fail> <sensor_group_subscription_list_delete_fail> <sensor_group_subscription_unsupported_data_source_fail> <destination_group_subscription_list_delete_fail> <destination_group_destination_list_delete_fail> <subscription_sensor_group_list_delete_fail> <subscription_destination_group_list_delete_fail> <destination_destination_group_list_delete_fail> <destination_delete_from_destination_group_fail> <destination_group_delete_from_subscription_fail> <sensor_group_delete_from_subscription_fail> <sensor_path_delete_from_sensor_group_fail> <get_encode_cb_fail> <get_transport_cb_fail> ] ]

Syntax Description

show

Show running system information

telemetry

Show telemetry info

control

Show telemetry control

database

Show database

subscriptions

(Optional) Show subscriptions

destination-groups

(Optional) Show destination-groups

destinations

(Optional) Show destinations

sensor-paths

(Optional) Show sensor-paths

sensor-groups

(Optional) Show sensor-groups

stats

Show stats

__readonly__

(Optional)

TABLE_sensor_grp

(Optional) Sensor group table

sensor_grp_db_size

(Optional) Sensor group DB size

snsr_grp_row_idx

(Optional) Sensor Group Row Idx

snsr_grp_id

(Optional) Sensor Group Id

snsr_grp_type

(Optional) Sensor Group Type

snsr_grp_collector_type

(Optional) Sensor Group Collector Type

snsr_grp_timer_interval

(Optional) Sensor Group Timer Interval in ms

snsr_grp_timer_status

(Optional) Sensor Group Timer Status

snsr_grp_sub_count

(Optional) Sensor Group Sub Count

snsr_grp_sub_id

(Optional) Sensor Group Sub Id

snsr_grp_dc_cur_time

(Optional) Sensor Group Data collection Current Time

snsr_grp_dc_min_time

(Optional) Sensor Group Data collection Minimum Time

snsr_grp_dc_max_time

(Optional) Sensor Group Data collection Maximum Time

snsr_grp_enc_cur_time

(Optional) Sensor Group Encoding Current Time

snsr_grp_enc_min_time

(Optional) Sensor Group Encoding Minimum Time

snsr_grp_enc_max_time

(Optional) Sensor Group Encoding Maximum Time

snsr_grp_trans_cur_time

(Optional) Sensor Group Transport Current Time

snsr_grp_trans_min_time

(Optional) Sensor Group Transport Minimum Time

snsr_grp_trans_max_time

(Optional) Sensor Group Transport Maximum Time

snsr_grp_stream_cur_time

(Optional) Sensor Group Streaming Current Time

snsr_grp_stream_min_time

(Optional) Sensor Group Streaming Minimum Time

snsr_grp_stream_max_time

(Optional) Sensor Group Streaming Maximum Time

snsr_grp_stream_col_id_drop

(Optional) Sensor Group Stream collection id Drop

snsr_grp_stream_last_col_id_drop

(Optional) Sensor Group Stream last collection id Drop

snsr_grp_stream_col_drop

(Optional) Sensor Group Stream number of collections dropped

TABLE_sensor_path

(Optional) Sensor path table

sensor_path_db_size

(Optional) Sensor path DB size

path_row_idx

(Optional) Sensor Path row index

path_subscribed

(Optional) Sensor path subscribed to events

path_group_count

(Optional) Sensor path group subscriptions

path_secondary_group_count

(Optional) Sensor path secondary group subscriptions

path_level

(Optional) Sensor path level

path_name

(Optional) Sensor path name

path_grp_id

(Optional) Sensor path group ID

path_query_condition

(Optional) Sensor path query condition

path_filter_condition

(Optional) Sensor path filter condition

path_gpb_cur_enc_size

(Optional) Sensor path gpb current encoded size

path_gpb_min_enc_size

(Optional) Sensor path gpb min encoded size

path_gpb_max_enc_size

(Optional) Sensor path gpb max encoded size

path_json_cur_enc_size

(Optional) Sensor path json current encoded size

path_json_min_enc_size

(Optional) Sensor path json min encoded size

path_json_max_enc_size

(Optional) Sensor path json max encoded size

TABLE_destination_group

(Optional) Destination group table

destination_group_id

(Optional) Destination group ID

destination_group_db_size

(Optional) Destination group DB size

destination_group_use_vrf

(Optional) Destination group vrf

destination_group_refcount

(Optional) Destination group subscription count

TABLE_destinations

(Optional) Destination table

destination_db_size

(Optional) Destination DB size

destination_ip

(Optional) Destination IP address

destination_port

(Optional) Destination IP port

destination_encoding

(Optional) Destination encoding

destination_transport

(Optional) Destination transport

destination_refcount

(Optional) Destination subscription count

TABLE_subscriptions

(Optional) Subscription table

subscription_id

(Optional) Subscription ID

subscription_db_size

(Optional) Subscription DB size

data_collector_type

(Optional) Data collector type

db_statistics

(Optional) DB Statistics

chunk_alloc_fail

(Optional) Chunk Alloc Fail

sensor_path_chunk_create_fail

(Optional) Sensor Path Chunk Create Fail

sensor_group_chunk_create_fail

(Optional) Sensor Group Chunk Create Fail

destination_chunk_create_fail

(Optional) Destination Chunk Create Fail

destination_group_chunk_create_fail

(Optional) Destination Group Chunk Create Fail

subscription_chunk_create_fail

(Optional) Subscription Chunk Create Fail

sensor_path_db_create_fail

(Optional) Sensor Path Db Create Fail

sensor_group_db_create_fail

(Optional) Sensor Group Db Create Fail

destination_db_create_fail

(Optional) Destination Db Create Fail

destination_group_db_create_fail

(Optional) Destination Group Db Create Fail

subscription_db_create_fail

(Optional) Subscription Db Create Fail

sensor_path_db_insert_fail

(Optional) Sensor Path Db Insert Fail

sensor_group_db_insert_fail

(Optional) Sensor Group Db Insert Fail

destination_db_insert_fail

(Optional) Destination Db Insert Fail

destination_group_db_insert_fail

(Optional) Destination Group Db Insert Fail

subscription_db_insert_fail

(Optional) Subscription Db Insert Fail

sensor_path_db_delete_fail

(Optional) Sensor Path Db Delete Fail

sensor_group_db_delete_fail

(Optional) Sensor Group Db Delete Fail

destination_db_delete_fail

(Optional) Destination Db Delete Fail

destination_group_db_delete_fail

(Optional) Destination Group Db Delete Fail

subscription_db_delete_fail

(Optional) Subscription Db Delete Fail

sensor_path_delete_in_use

(Optional) Sensor Path Delete In Use

sensor_group_delete_in_use

(Optional) Sensor Group Delete In Use

destination_delete_in_use

(Optional) Destination Delete In Use

destination_group_delete_in_use

(Optional) Destination Group Delete In Use

delete_destination_in_use_fail

(Optional) Delete Destination In Use Fail

sensor_path_sensor_group_list_create_fail

(Optional) Sensor Path Sensor Group List Create Fail

sensor_path_prop_list_create_fail

(Optional) Sensor Path Prop List Create Fail

sensor_path_secondary_sensor_path_list_create_fail

(Optional) Sensor Path Secondary Sensor Path List Create Fail

sensor_path_secondary_sensor_group_list_create_fail

(Optional) Sensor Path Secondary Sensor Group List Create Fail

sensor_group_sensor_path_list_create_fail

(Optional) Sensor Group Sensor Path List Create Fail

sensor_group_subscription_list_create_fail

(Optional) Sensor Group Subscription List Create Fail

destination_group_subscription_list_create_fail

(Optional) Destination Group Subscription List Create Fail

destination_group_destination_list_create_fail

(Optional) Destination Group Destination List Create Fail

destination_destination_group_list_create_fail

(Optional) Destination Destination Group List Create Fail

subscription_sensor_group_list_create_fail

(Optional) Subscription Sensor Group List Create Fail

subscription_destination_group_list_create_fail

(Optional) Subscription Destination Group List Create Fail

sensor_group_sensor_path_list_delete_fail

(Optional) Sensor Group Sensor Path List Delete Fail

sensor_group_subscription_list_delete_fail

(Optional) Sensor Group Subscription List Delete Fail

sensor_group_subscription_unsupported_data_source_fail

(Optional) Sensor Group Subscription Unsupported Data Source Fail

destination_group_subscription_list_delete_fail

(Optional) Destination Group Subscription List Delete Fail

destination_group_destination_list_delete_fail

(Optional) Destination Group Destination List Delete Fail

subscription_sensor_group_list_delete_fail

(Optional) Subscription Sensor Group List Delete Fail

subscription_destination_group_list_delete_fail

(Optional) Subscription Destination Group List Delete Fail

destination_destination_group_list_delete_fail

(Optional) Destination Destination Group List Delete Fail

destination_delete_from_destination_group_fail

(Optional) Destination Delete From Destination Group Fail

destination_group_delete_from_subscription_fail

(Optional) Destination Group Delete From Subscription Fail

sensor_group_delete_from_subscription_fail

(Optional) Sensor Group Delete From Subscription Fail

sensor_path_delete_from_sensor_group_fail

(Optional) Sensor Path Delete From Sensor Group Fail

get_encode_cb_fail

(Optional) Get Encode Cb Fail

get_transport_cb_fail

(Optional) Get Transport Cb Fail

Command Mode

- /exec

show telemetry data collector brief

show telemetry data collector { brief | details } [ __readonly__ [ { TABLE_data_collector_brief <dcb_row_idx> <dcb_collector_type> <dcb_success_count> <dcb_fail_count> <dcb_skip_count> } ] [ { TABLE_data_collector_details <dcd_row_idx> <dcd_success_count> <dcd_fail_count> <dcd_skip_count> <dcd_path_name> <dcd_grp_id> } ] ]

Syntax Description

show

Show running system information

telemetry

Show telemetry info

data

Show telemetry data info

collector

Show telemetry data collector info

brief

Show component level data collection stats

details

Show path level data collection stats

__readonly__

(Optional)

TABLE_data_collector_brief

(Optional) Data collector brief

dcb_row_idx

(Optional) Data collector brief index

dcb_collector_type

(Optional) Data collector type

dcb_success_count

(Optional) Data collector success count

dcb_fail_count

(Optional) Data collector fail count

dcb_skip_count

(Optional) Data collector skip count

TABLE_data_collector_details

(Optional) Data collector details

dcd_row_idx

(Optional) Data collector row index

dcd_success_count

(Optional) Data collector success count

dcd_fail_count

(Optional) Data collector fail count

dcd_skip_count

(Optional) Data collector skip count

dcd_path_name

(Optional) Data collector path name

dcd_grp_id

(Optional) Data collector group ID

Command Mode

- /exec

show telemetry event collector stats

show telemetry event collector { stats | errors } [ __readonly__ [ { TABLE_event_collector_stats <ec_row_idx> <ec_collection_count> <ec_last_collection_ts> <ec_sensor_path> <ec_sensor_grp_id> } ] [ { event_collector_errors <apic_cookie_gen_fail> <auth_fail> <auth_refresh_fail> <auth_refresh_timer_start_fail> <conn_timer_start_fail> <conn_attempts> <event_sub_init_fail> <event_data_enq_fail> <event_sub_fail> <event_sub_refresh_fail> <pending_sub_list_create_fail> <sub_hash_table_create_fail> <sub_hash_table_destroy_fail> <sub_hash_table_insert_fail> <sub_hash_table_remove_fail> <sub_refresh_timer_start_fail> <web_sock_conn_fail> } ] ]

Syntax Description

show

Show running system information

telemetry

Show telemetry info

event

Show telemetry event info

collector

Show telemetry event collector info

stats

Show all tm stat info

errors

Show all tm error info

__readonly__

(Optional)

event_collector_errors

(Optional) Event collection failure

apic_cookie_gen_fail

(Optional) Apic Cookie Generation Fail

auth_fail

(Optional) Authentication Fail

auth_refresh_fail

(Optional) Authentication Refresh Fail

auth_refresh_timer_start_fail

(Optional) Authentication Refresh Timer Start Fail

conn_timer_start_fail

(Optional) Connection Timer Start Fail

conn_attempts

(Optional) Connection Attempts

event_sub_init_fail

(Optional) Event Sub Init Fail

event_data_enq_fail

(Optional) Event Data Enqueue Fail

event_sub_fail

(Optional) Event Subscription Fail

event_sub_refresh_fail

(Optional) Event Subscription Refresh Fail

pending_sub_list_create_fail

(Optional) Pending Subscription List Create Fail

sub_hash_table_create_fail

(Optional) Subscription Hash Table Create Fail

sub_hash_table_destroy_fail

(Optional) Subscription Hash Table Destroy Fail

sub_hash_table_insert_fail

(Optional) Subscription Hash Table Insert Fail

sub_hash_table_remove_fail

(Optional) Subscription Hash Table Remove Fail

sub_refresh_timer_start_fail

(Optional) Subscription Refresh Timer Start Fail

web_sock_conn_fail

(Optional) Web Socket Connection Fail

TABLE_event_collector_stats

(Optional) Event collector stats table

ec_row_idx

(Optional) Event collector row index

ec_collection_count

(Optional) Event collection count

ec_last_collection_ts

(Optional) Last event collection timestamp

ec_sensor_path

(Optional) Event collection sensor path

ec_sensor_grp_id

(Optional) Event collection group ID

Command Mode

- /exec

show telemetry pipeline stats

show telemetry pipeline stats [ __readonly__ { main_statistics { timers <start_fail> } { data_collector <dnode_create_fail> } { event_collector <enode_create_fail> <node_add_fail> <invalid_data> } { memory <allowed_limit> <occupied_mem> } } { queue_statistics { TABLE_queue <queue_name> <actual_size> <current_size> <max_size> <full_count> <enqueue_error> <dequeue_error> } } ]

Syntax Description

show

Show running system information

telemetry

Show telemetry info

pipeline

Show telemetry pipeline info

stats

Show all telemetry pipeline stats

__readonly__

(Optional)

main_statistics

(Optional) Main Statistics

timers

(Optional) Timers Statistics

start_fail

(Optional) Timers start failure

data_collector

(Optional) Data collector Statistics

dnode_create_fail

(Optional) Data Node creation failure

event_collector

(Optional) Event collector Statistics

enode_create_fail

(Optional) Event Node creation failure

node_add_fail

(Optional) Node add failure

invalid_data

(Optional) Invalid data

memory

(Optional) Memory Statistics

allowed_limit

(Optional) Allowed memory limit

occupied_mem

(Optional) Occupied memory

queue_statistics

(Optional) Queue Statistics

TABLE_queue

(Optional) Queue table

queue_name

(Optional) Queue name

actual_size

(Optional) Actual size

current_size

(Optional) Current size

max_size

(Optional) Maximum size

full_count

(Optional) Full count

enqueue_error

(Optional) Enqueue error

dequeue_error

(Optional) Dequeue error

Command Mode

- /exec

show telemetry transport

show telemetry transport [ <session_id> [ { stats | errors } ] ] [ __readonly__ [ { TABLE_transport_info <session_idx> [ <ip_address> ] [ <port> ] [ <dest_info> ] [ <encoding_type> ] <transport_type> <transport_status> [ <transport_security_cert_fname> ] [ <transport_last_connected> ] [ <transport_last_disconnected> ] [ <transport_errors_count> ] [ <transport_last_tx_error> ] } ] [ <t_session_id> ] [ { transport_statistics [ { connect_statistics <connect_count> <last_connected> <disconnect_count> <last_disconnected> } ] { trans_statistics <compression> <source_interface_name> <source_interface_ip> <transmit_count> <last_tx_time> <min_tx_time> <max_tx_time> <avg_tx_time> <cur_tx_time> } } ] [ { transport_errors { connect_errors <connect_errors_count> } { trans_errors <trans_errors_count> <last_tx_error> [ <last_tx_return_code> ] } } ] [ { transport_retry_stats <ts_event_retry_bytes> <ts_event_retry_size> <ts_timer_retry_bytes> <ts_timer_retry_size> <ts_retries_sent> <ts_retries_dropped> } ] [ <retry_buffer_size> ] [ <event_retry_bytes> ] [ <timer_retry_bytes> ] [ <retries_sent> ] [ <retries_dropped> ] ]

Syntax Description

show

Show running system information

telemetry

Show telemetry info

transport

Show telemetry transport info

session_id

(Optional) Session id

stats

(Optional) Show all tm stat info

errors

(Optional) Show all tm error info

__readonly__

(Optional)

TABLE_transport_info

(Optional) Transport information

session_idx

(Optional) Session Id

ip_address

(Optional) Transport IP address

port

(Optional) Transport port

dest_info

(Optional) Destination information

encoding_type

(Optional) Encoding type

transport_type

(Optional) Transport type

transport_status

(Optional) Transport status

transport_security_cert_fname

(Optional) Transport security file name

transport_last_connected

(Optional) Transport last connected

transport_last_disconnected

(Optional) Transport last disconnected

transport_errors_count

(Optional) Transport errors count

transport_last_tx_error

(Optional) Transport last tx error

transport_statistics

(Optional) Transport statistics

t_session_id

(Optional) Transport Session id

connect_statistics

(Optional) Connection statistics

connect_count

(Optional) Connection count

last_connected

(Optional) Last connected timestamp

disconnect_count

(Optional) Disconnect count

last_disconnected

(Optional) Last disconnected timestamp

trans_statistics

(Optional) Transport statistics

compression

(Optional) Compression status

source_interface_name

(Optional) Source interface name

source_interface_ip

(Optional) Source interface ip

transmit_count

(Optional) Transmission count

last_tx_time

(Optional) Last Transmission time

min_tx_time

(Optional) Minimum transmission time

max_tx_time

(Optional) Maximum transmission time

avg_tx_time

(Optional) Average transmission time

cur_tx_time

(Optional) Current transmission time

transport_errors

(Optional) Transport errors

connect_errors

(Optional) Connection errors

connect_errors_count

(Optional) Connection error count

trans_errors

(Optional) Transport errors

trans_errors_count

(Optional) Transport error count

last_tx_error

(Optional) Last transport error

last_tx_return_code

(Optional) Last transport return code

transport_retry_stats

(Optional) Retry Statistics

ts_event_retry_bytes

(Optional) Event Retry buffer size

ts_timer_retry_bytes

(Optional) Timer Retry buffer size

ts_event_retry_size

(Optional) Event Retry number of messages

ts_timer_retry_size

(Optional) Timer Retry number of messages

ts_retries_sent

(Optional) Number of retries sent

ts_retries_dropped

(Optional) Number of retries dropped

event_retry_bytes

(Optional) Event Retry buffer size

timer_retry_bytes

(Optional) Timer Retry buffer size

retries_sent

(Optional) Number of retries sent

retries_dropped

(Optional) Number of retries dropped

retry_buffer_size

(Optional) Retry buffer size

Command Mode

- /exec

show telnet server

show telnet server [ __readonly__ { operation_status <o_status> } ]

Syntax Description

show

Show running system information

telnet

Show telnet server configuration

server

Show telnet server configuration

__readonly__

(Optional)

operation_status

(Optional) run-time information about telnet

o_status

(Optional) operational status of telnet server

Command Mode

- /exec

show terminal

show terminal [ __readonly__ { <terminal_tty> } { <terminal_type> } { <terminal_length> } { <terminal_width> } { <session_timeout> } { <evnt_mgr_cli_evnt_bypass> } { <redirection_mode> } { <acc_log_all_commands> } [ <vlan_mutex_value> ] { <vlan_batch_mode> } ]

Syntax Description

show

Show running system information

terminal

Display terminal configuration parameters

__readonly__

(Optional)

terminal_tty

(Optional)

terminal_type

(Optional)

terminal_length

(Optional)

terminal_width

(Optional)

session_timeout

(Optional)

evnt_mgr_cli_evnt_bypass

(Optional)

redirection_mode

(Optional)

acc_log_all_commands

(Optional)

vlan_mutex_value

(Optional)

vlan_batch_mode

(Optional)

Command Mode

- /exec

show terminal output xml version

show terminal output xml version [ __readonly__ { xml_version <version> } ]

Syntax Description

show

Show running system information

terminal

Display

output

Display

xml

Display

version

Display

__readonly__

(Optional)

xml_version

(Optional) xml version

version

(Optional) version

Command Mode

- /exec

show time-range

show time-range [ <name> ] [ __readonly__ TABLE_timerange <timerange_name> <active> [ TABLE_seqno <seqno> { { absolute [ <start_abs_h> <start_abs_m> <start_abs_s> <start_abs_d> <start_abs_mon> <start_abs_y> ] [ <end_abs_h> <end_abs_m> <end_abs_s> <end_abs_d> <end_abs_mon> <end_abs_y> ] } | { periodic { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday | daily | weekdays | weekend } + <start_per_h> <start_per_m> <start_per_s> [ <eday> ] <end_per_h> <end_per_m> <end_per_s> } | { <remark> } } ] ]

Syntax Description

show

Show running system information

time-range

Define time range entries

name

(Optional) Time range name

__readonly__

(Optional)

TABLE_timerange

(Optional)

timerange_name

(Optional)

active

(Optional) active

TABLE_seqno

(Optional)

seqno

(Optional) Sequence number

absolute

(Optional)

periodic

(Optional)

remark

(Optional)

start_abs_h

(Optional)

start_abs_m

(Optional)

start_abs_s

(Optional)

start_abs_d

(Optional)

start_abs_mon

(Optional)

start_abs_y

(Optional)

end_abs_h

(Optional)

end_abs_m

(Optional)

end_abs_s

(Optional)

end_abs_d

(Optional)

end_abs_mon

(Optional)

end_abs_y

(Optional)

Monday

(Optional) Monday

Tuesday

(Optional) Tuesday

Wednesday

(Optional) Wednesday

Thursday

(Optional) Thursday

Friday

(Optional) Friday

Saturday

(Optional) Saturday

Sunday

(Optional) Sunday

daily

(Optional) Every day of the week

weekdays

(Optional) Monday thru Friday

weekend

(Optional) Saturday and Sunday

start_per_h

(Optional)

start_per_m

(Optional)

start_per_s

(Optional)

eday

(Optional) Day of the week

end_per_h

(Optional)

end_per_m

(Optional)

end_per_s

(Optional)

Command Mode

- /exec

show time-stamp running-config last-changed

show time-stamp running-config last-changed [ __readonly__ <run_config_change_time> ]

Syntax Description

show

Show running system information

time-stamp

Time running-config last chnaged

running-config

Current operating configuration

last-changed

Running configuration last changed

__readonly__

(Optional) Read only

run_config_change_time

(Optional) Running-cfg last change timestamp

Command Mode

- /exec

show track

show track { [ <object-id> | interface | ip { route | sla } | ipv6 routev6 | list boolean and | list boolean or | list threshold weight | list threshold percentage ] } [ __readonly__ { <show_track_start> { TABLE_track_detail <st_obj_id> <st_obj_type> [ <st_obj_instance> ] <st_obj_param> <st_obj_timer_value> [ <st_obj_state> ] [ <st_obj_chg_cnt> ] [ <st_last_chg_time> ] [ <st_threshold_info> ] [ <st_track_list_obj> ] + [ <st_vrf> ] [ <st_ipsla_rcode> ] [ <st_ipsla_rtt> ] [ <show_track_clnt_hdr> ] [ <show_track_clnt_start> ] [ { TABLE_track_clnt_info <st_client_name> [ <st_client_iface> ] [ <st_client_group_id> ] [ <st_client_detail> ] } ] [ <show_track_clnt_end> ] [ <st_track_list_info> ] + <st_obj_up_delay> <st_obj_down_delay> } <show_track_end> } ]

Syntax Description

show

Negate a command or set its defaults

track

Tracking information

object-id

(Optional) Tracked object

interface

(Optional) Interface objects

ip

(Optional) IPv4 Protocol objects

route

(Optional) route (ipv4) objects

sla

(Optional) Service Level Agreement objects

ipv6

(Optional) IPv6 Protocol objects

routev6

(Optional) route (ipv6) objects

list

(Optional) Tracklist objects

boolean

(Optional) Boolean Traclist

and

(Optional) AND boolean objects

or

(Optional) OR boolean objects

threshold

(Optional) Threshold parameters

weight

(Optional) Threshold weight

percentage

(Optional) Threshold percentage

__readonly__

(Optional) Read only

show_track_start

(Optional) Show track start

TABLE_track_detail

(Optional) Track table detail

st_obj_id

(Optional) Object id

st_obj_type

(Optional) Object Type

st_obj_instance

(Optional) Object instance

st_obj_param

(Optional) Object parameter

st_obj_timer_value

(Optional) Current value of timer

st_obj_state

(Optional) Object status

st_obj_chg_cnt

(Optional) Count of Object state changes

st_last_chg_time

(Optional) Timestamp of last change

st_threshold_info

(Optional) Threshold Parameters

st_track_list_obj

(Optional) Objects part of this list

st_vrf

(Optional) VRF

st_ipsla_rcode

(Optional) IP SLA Return Code

st_ipsla_rtt

(Optional) IP SLA RTT

show_track_clnt_hdr

(Optional) Tracked by:

show_track_clnt_start

(Optional) Show track client start

TABLE_track_clnt_info

(Optional) Track client info

st_client_name

(Optional) Tracking client name

st_client_iface

(Optional) Tracking client interface

st_client_group_id

(Optional) Client group id

st_client_detail

(Optional) Tracking client detail

show_track_clnt_end

(Optional) End of track client

st_track_list_info

(Optional) Track list info

st_obj_up_delay

(Optional) Delay up notification

st_obj_down_delay

(Optional) Delay down notification

show_track_end

(Optional) End of Track

Command Mode

- /exec

show track brief

show track { [ <object-id> | interface | ip { route | sla } | ipv6 routev6 | list boolean and | list boolean or | list threshold weight | list threshold percentage ] } brief [ __readonly__ { <show_track_brf_start> <show_track_brf_all_begin> { TABLE_track_brief <st_brf_obj_id> <st_brf_obj_type> <st_brf_obj_instance> <st_brf_obj_param> <st_brf_obj_state> <st_brf_last_chg_time> } <show_track_brf_end> } ]

Syntax Description

show

Negate a command or set its defaults

track

Tracking information

object-id

(Optional) Tracked object

interface

(Optional) Interface objects

ip

(Optional) IPv4 Protocol objects

route

(Optional) route (ipv4) objects

sla

(Optional) Service Level Agreement objects

ipv6

(Optional) IPv6 Protocol objects

routev6

(Optional) route (ipv6) objects

list

(Optional) Tracklist objects

boolean

(Optional) Boolean Traclist

and

(Optional) AND boolean objects

or

(Optional) OR boolean objects

threshold

(Optional) Threshold parameters

weight

(Optional) Threshold weight

percentage

(Optional) Threshold percentage

brief

Brief output

__readonly__

(Optional) Read only

show_track_brf_start

(Optional) Show track brief start

show_track_brf_all_begin

(Optional) Start of all brief

TABLE_track_brief

(Optional) Track table brief

st_brf_obj_id

(Optional) Object id

st_brf_obj_type

(Optional) Object Type

st_brf_obj_instance

(Optional) Object instance

st_brf_obj_param

(Optional) Object parameter

st_brf_obj_state

(Optional) Object status

st_brf_last_chg_time

(Optional) Timestamp of last change

show_track_brf_end

(Optional) End of Group

Command Mode

- /exec

show troubleshoot l2 mac vlan

show troubleshoot l2 mac <mac-addr> vlan <vlan-id> [ detail ]

Syntax Description

show

Show running system information

troubleshoot

Display troubleshoot data dump

l2

Display l2 information

mac

MAC address

mac-addr

address

vlan

Vlan ID

vlan-id

vlan number

detail

(Optional) Print detailed debugging info for mac/interface

Command Mode

- /exec

show troubleshoot l3 ipv4 vrf

show troubleshoot l3 { ipv4 <dip4-prefix> [ src-ip <sip4-prefix> ] | ipv6 <dip6-prefix> [ src-ip <sip6-prefix> ] } vrf <vrf-name>

Syntax Description

show

troubleshoot

Display troubleshoot data dump

l3

Display l3 information

ipv4

Choose IPv4 address

ipv6

Choose IPv6 address

dip4-prefix

Display single exact match route for Destination IP

vrf

check routes for a specific VRF

vrf-name

vrf name

src-ip

(Optional) Source IP for routing hash CLI

sip4-prefix

(Optional) Source IPv4 address

Command Mode

- /exec

show trunk protocol

show trunk protocol [ __readonly__ <trunk_protocol_status> ]

Syntax Description

show

Show running system information

trunk

Show trunk information

protocol

Show trunk protocol information

__readonly__

(Optional)

trunk_protocol_status

(Optional) trunk protocol status

Command Mode

- /exec

show ttag brief

show ttag brief [ __readonly__ { TABLE_ttag <ttag-ifindex> <state> } <ttag-end> ]

Syntax Description

ttag

enable ingress packet with ttag on this interface

brief

ttag port in brief list

__readonly__

(Optional) Read Only

TABLE_ttag

(Optional) ttag table

ttag-ifindex

(Optional) ttag ifindex

state

(Optional) TTAG state

ttag-end

(Optional) End of table

Command Mode

- /exec

show ttag brief

show ttag brief [ __readonly__ { TABLE_ttag <ttag-ifindex> <state> } <ttag-end> ]

Syntax Description

ttag

enable ingress packet with ttag on this interface

brief

ttag port in brief list

__readonly__

(Optional) Read Only

TABLE_ttag

(Optional) ttag table

ttag-ifindex

(Optional) ttag ifindex

ttag-end

(Optional) End of table

state

(Optional) TTAG state

Command Mode

- /exec

show tunnel iftable

show tunnel iftable [ <ifindex-in> ] [ __readonly__ TABLE-tunnelIfTable <ifindex-out> <tunnelIfEncapsMethod> <tunnelIfHopLimit> <tunnelIfSecurity> <tunnelIfTOS> <tunnelIfFlowLabel> <tunnelIfAddressType> <tunnelIfLocalInetAddress> <tunnelIfRemoteInetAddress> <tunnelIfEncapsLimit> ]

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

iftable

Show tunnel interface table

ifindex-in

(Optional) Tunnel ifindex

__readonly__

(Optional)

TABLE-tunnelIfTable

(Optional) Tunnel interface table

ifindex-out

(Optional) Tunnel ifindex

tunnelIfEncapsMethod

(Optional) Encapsulation Method

tunnelIfHopLimit

(Optional) Hop Limit

tunnelIfSecurity

(Optional) Security

tunnelIfTOS

(Optional) TOS

tunnelIfFlowLabel

(Optional) Flow Label

tunnelIfAddressType

(Optional) Address Type

tunnelIfLocalInetAddress

(Optional) Local IP Address

tunnelIfRemoteInetAddress

(Optional) Remote IP Address

tunnelIfEncapsLimit

(Optional) Encaps Limit

Command Mode

- /exec

show tunnel inetconfigtable

show tunnel inetconfigtable [ <tunnelInetConfigAddressType-in> [ [ <tunnelInetConfigLocalAddress-in> [ <tunnelInetConfigRemoteAddress-in> [ <tunnelInetConfigEncapsMethod-in> [ <tunnelInetConfigID-in> ] ] ] ] ] ] [ __readonly__ TABLE-tunnelInetConfigTable <tunnelInetConfigAddressType-out> <tunnelInetConfigLocalAddress-out> <tunnelInetConfigRemoteAddress-out> <tunnelInetConfigEncapsMethod-out> <tunnelInetConfigID-out> <tunnelInetConfigIfIndex> <tunnelInetConfigStatus> <tunnelInetConfigStorageType> ]

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

inetconfigtable

Show inet config table

tunnelInetConfigAddressType-in

(Optional) Address Type

tunnelInetConfigLocalAddress-in

(Optional) Local IP Address

tunnelInetConfigRemoteAddress-in

(Optional) Remote IP Addess

tunnelInetConfigEncapsMethod-in

(Optional) Encapsulation Method

tunnelInetConfigID-in

(Optional) Configuration ID

__readonly__

(Optional)

TABLE-tunnelInetConfigTable

(Optional) Tunnel Inet Config Table

tunnelInetConfigAddressType-out

(Optional) Address Type

tunnelInetConfigLocalAddress-out

(Optional) Local IP Address

tunnelInetConfigRemoteAddress-out

(Optional) Remote IP Addess

tunnelInetConfigEncapsMethod-out

(Optional) Encapsulation Method

tunnelInetConfigID-out

(Optional) Configuration ID

tunnelInetConfigIfIndex

(Optional) If Index

tunnelInetConfigStatus

(Optional) Row Status

tunnelInetConfigStorageType

(Optional) Storage Type

Command Mode

- /exec

Chapter 21. U Show Commands

- show udld

- show udld global

- show udld neighbors

- show ulib process

- show user-account

- show username keypair

- show userpassphrase

- show users

show udld

show udld [ <if0> ] [ __readonly__ TABLE_interface <interface> <mib-port-status> <mib-oper-status> <mib-aggresive-mode> <admin-port-mode> <operational-port-mode> <current-bidirectional-state> <current-operational-state> <no-multiple-neighbor-detected> <message-interval> <timeout-interval> TABLE_entry [ <entry-number> ] [ <expiration-time> ] [ <device-id> ] [ <neighbor-state> ] [ <device-name> ] [ <port-id> ] [ <neighbor-echo-device-number> ] [ <neighbor-echo-device-name> ] [ <neighbor-echo-port-number> ] [ <neighbor-echo-port-id> ] [ <neighbor-message-interval> ] [ <neighbor-timeout-interval> ] [ <cdp-device-name> ] [ <pkt-xmt-rec-time> ] + [ <pc-index> ] ]

Syntax Description

show

Show running system information

udld

UDLD status and configuration on one or all interfaces

if0

(Optional) Enter an interface name if only one single interface status is desired

__readonly__

(Optional)

TABLE_interface

(Optional)

interface

(Optional) Interface ID

mib-port-status

(Optional) Port MIB enable status

mib-oper-status

(Optional) Port MIB Operational status

mib-aggresive-mode

(Optional) Port MIB aggresive mode

admin-port-mode

(Optional) Port enable administration configuration setting

operational-port-mode

(Optional) Port enable operational state

current-bidirectional-state

(Optional) Current bidirectional state

current-operational-state

(Optional) Current operational state

no-multiple-neighbor-detected

(Optional) No multiple neighbor detected

message-interval

(Optional) UDLD probe messsage interval

timeout-interval

(Optional) UDLD detection timeout interval

TABLE_entry

(Optional) Neighbor entry info

entry-number

(Optional) Neighbor entry number

expiration-time

(Optional) Expiration time

device-id

(Optional) Device ID

neighbor-state

(Optional) Current neighbor state

device-name

(Optional) Device name

port-id

(Optional) Port ID

neighbor-echo-device-number

(Optional) Echo device number

neighbor-echo-device-name

(Optional) Echo device name

neighbor-echo-port-number

(Optional) Echo port number

neighbor-echo-port-id

(Optional) Echo port ID

neighbor-message-interval

(Optional) UDLD probe messsage interval

neighbor-timeout-interval

(Optional) UDLD detection timeout interval

cdp-device-name

(Optional) CDP Device name

pkt-xmt-rec-time

(Optional) Last UDLD packet send/recv time

pc-index

(Optional) Port channel index

Command Mode

- /exec

show udld global

show udld global [ __readonly__ <udld-global-mode> <message-interval> ]

Syntax Description

show

Show running system information

udld

UDLD protocol

global

UDLD global status and configuration on all interfaces

__readonly__

(Optional)

udld-global-mode

(Optional) UDLD global configuration setting

message-interval

(Optional) UDLD probe messsage interval

Command Mode

- /exec

show udld neighbors

show udld neighbors [ __readonly__ TABLE_entry <local-port-id> <neighbor-echo-device-name> <device-id> <neighbor-echo-port-id> <neighbor-state> ]

Syntax Description

show

Show running system information

udld

UDLD protocol

neighbors

UDLD neighbor interfaces

__readonly__

(Optional)

TABLE_entry

(Optional)

local-port-id

(Optional) Local port ID

neighbor-echo-device-name

(Optional) Echo device name

device-id

(Optional) Device ID

neighbor-echo-port-id

(Optional) Echo port ID

neighbor-state

(Optional) Current neighbor state

Command Mode

- /exec

show ulib process

show ulib process

Syntax Description

show

Show running system information

ulib

Display ULIB status and configuration

process

ULIB Process information

Command Mode

- /exec

show user-account

show user-account [ <s0> ] [ __readonly__ TABLE_template <usr_name> [ <expire_date> ] { TABLE_role <role> } [ <remote_login> ] [ <sshkey_info> ] { [ TABLE_keys <ssh_keys> ] } ]

Syntax Description

show

Show running system information

TABLE_template

(Optional)

TABLE_role

(Optional)

TABLE_keys

(Optional)

__readonly__

(Optional)

usr_name

(Optional) Name of the user

expire_date

(Optional) Expiry date for this user account(in YYYY-MM-DD format)

role

(Optional) role/s which the user is to be assigned to

remote_login

(Optional) Remote account information for a remote user

sshkey_info

(Optional) SSH key information of user

ssh_keys

(Optional) SSH key pairs of the user

user-account

Show user information

s0

(Optional) User name

Command Mode

- /exec

show username keypair

show username <s0> keypair [ __readonly__ { TABLE_sessions <t_type> <t_time> <t_keys> <t_bitcount> <t_fingerprint> } ]

Syntax Description

show

Show running system information

username

Show user information.

keypair

Show SSH keypairs

s0

user name

__readonly__

(Optional)

TABLE_sessions

(Optional) username keypair

t_type

(Optional) keys type

t_time

(Optional) timestamp

t_keys

(Optional) ssh key

t_bitcount

(Optional) bitcount

t_fingerprint

(Optional) fingerprint

Command Mode

- /exec

show userpassphrase

show userpassphrase { min-length | max-length | length } [ __readonly__ [ Minimum_length <min_length> ] [ Maximum_length <max_length> ] ]

Syntax Description

show

Show running system information

userpassphrase

user passphrase

min-length

passphrase minimum length

max-length

passphrase maximum length

length

passphrase min and max length

__readonly__

(Optional)

Minimum_length

(Optional) minimum length of the passphrase

min_length

(Optional) Absolute value of the Minimum length

Maximum_length

(Optional) Maximum length of the passphrase

max_length

(Optional) Absolute value of max length

Command Mode

- /exec

show users

show users [ __readonly__ { TABLE_sessions <u_name> <t_terminal> <t_time> <t_idle> <p_pid> <c_comment> } ]

Syntax Description

show

Show running system information

users

Show the current users logged in the system

__readonly__

(Optional)

TABLE_sessions

(Optional) users table

u_name

(Optional) user name

t_terminal

(Optional) terminal

t_time

(Optional) time

t_idle

(Optional) idle

p_pid

(Optional) pid

c_comment

(Optional) comment

Command Mode

- /exec

Chapter 22. V Show Commands

- show vdc

- show vdc current-vdc

- show vdc fcoe-vlan-range

- show vdc resource

- show vdc resource

- show vdc resource template

- show version

- show version compatibility

- show version epld

- show version image

- show version module

- show version module epld

- show virtual-service

- show virtual-service storage pool list

- show virtual-service tech-support

- show virtual-service utilization name

- show virtual-service version

- show vlan-mgr errors

- show vlan-mgr event-history

- show vlan

- show vlan access-list

- show vlan access-map

- show vlan all-ports

- show vlan counters

- show vlan dot1Q tag native

- show vlan fcoe

- show vlan filter

- show vlan id

- show vlan id counters

- show vlan id vn-segment

- show vlan mib private-vlan type

- show vlan name

- show vlan private-vlan

- show vlan private-vlan interface host

- show vlan private-vlan interface mapping

- show vlan private-vlan interface mode

- show vlan private-vlan interface trunk

- show vlan private-vlan mapping

- show vlan private-vlan type

- show vlan reserved

- show vlan xbrief

- show vlan xsummary

- show vmtracker

- show vmtracker certificate

- show vmtracker fabric auto-config

- show vmtracker status

- show vni hardware counters

- show vpc

- show vpc

- show vpc consistency-parameters

- show vpc consistency-parameters vlans

- show vpc orphan-ports

- show vpc peer-keepalive

- show vpc role

- show vpc statistics peer-keepalive

- show vpc statistics vpc

- show vpc upgrade

- show vrf

- show vrf

- show vrf topology

- show vrrp

- show vrrp bfd-sessions

- show vrrpv3

- show vrrs client

- show vrrs pathway

- show vrrs pathway address

- show vrrs server

- show vrrs tag

- show vsan

- show vsan membership

- show vsan membership interface

- show vsan usage

- show vtp counters

- show vtp datafile

- show vtp domain id

- show vtp interface

- show vtp mibstats

- show vtp password

- show vtp status

- show vtp trunk interface

- show vtp vlan

show vdc

{ show vdc [ <e-vdc2> ] [ feature-set | detail | membership [ all | status | module <module> ] | shared membership ] [ __readonly__ [ detail2 ] [ <swmode> ] { TABLE_vdc <vdc_id> <vdc_name> <state> <mac> <hap> <sw> <boot_order> [ <prio> <prio_per> ] [ <create_time> ] [ <reload_count> ] [ <restart_count> ] [ <restart_time> ] [ <restart_reason> ] <vtype> <lc-support> [ TABLE_fs <fs_id> <fs_name> ] [ TABLE_port <port-list> ] } ] }

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

e-vdc2

(Optional) Enter Virtual Device Context <vdc-id>

detail

(Optional) Show detailed vdc information

membership

(Optional) Show vdc interface membership information

shared

(Optional) Show the shared interfaces in a vdc

membership

(Optional) Show the shared interfaces in a vdc

module

(Optional) Show vdc interface membership information for a specific module only

module

(Optional) Show vdc interface membership information for a specific module only

status

(Optional) Show vdc related port-status

feature-set

(Optional) Show vdc feature-set information

all

(Optional) Show offline modules as well

__readonly__

(Optional) Read Only

detail2

(Optional)

swmode

(Optional)

TABLE_vdc

(Optional)

vdc_id

(Optional) vdc-id

TABLE_port

(Optional)

port-list

(Optional) port membership for VDC

vdc_name

(Optional) vdc-name

state

(Optional) state

mac

(Optional) mac address for VDC

hap

(Optional) hap policy

sw

(Optional) sw policy

vtype

(Optional)

lc-support

(Optional)

create_time

(Optional)

reload_count

(Optional)

restart_count

(Optional)

restart_time

(Optional)

restart_reason

(Optional)

TABLE_fs

(Optional)

fs_id

(Optional) fs id

fs_name

(Optional)

boot_order

(Optional)

prio

(Optional)

prio_per

(Optional)

Command Mode

- /exec

show vdc current-vdc

show vdc current-vdc [ __readonly__ <mode> <name> ]

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

current-vdc

Show which vdc you are currently in

__readonly__

(Optional) Read Only

mode

(Optional) cli mode

name

(Optional) vdc name

Command Mode

- /exec

show vdc fcoe-vlan-range

show vdc fcoe-vlan-range [ __readonly__ <fcoe-vdc> [ <fcoe-vlans> ] [ <sharing-vdcs> ] ]

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

fcoe-vlan-range

vlans reserved for FCoE

__readonly__

(Optional) Read Only

fcoe-vdc

(Optional)

sharing-vdcs

(Optional)

fcoe-vlans

(Optional)

Command Mode

- /exec

show vdc resource

show vdc <id> resource [ <res-mgr-res-known-name> ] [ __readonly__ { TABLE_vdc_resource_single_vdc <res_name> <min> <max> <used> <unused> <free> } ]

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

id

Enter Virtual Device Context <vdc-id>

resource

Show resource configuration for VDC

res-mgr-res-known-name

(Optional) Resource name

__readonly__

(Optional) Read Only

res_name

(Optional) Resource Name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

used

(Optional) Resource current usage for this VDC

unused

(Optional) Resource reserved for this VDC but currently not used

free

(Optional) Resource current free for this VDC

TABLE_vdc_resource_single_vdc

(Optional)

Command Mode

- /exec

show vdc resource

show vdc resource [ <res-mgr-res-known-name> ] [ detail | hidden-too | with-flags ] + [ __readonly__ { TABLE_resource <resource_name> <total_used> <total_unused> <total_free> <total_avail> <total> [ TABLE_vdc_resource_across_vdcs <vdc_name> <min> <max> <used> <unused> <free> ] } ]

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

resource

Show resource configuration across VDCs

res-mgr-res-known-name

(Optional) Resource name

detail

(Optional) Show detail resource configuration

hidden-too

(Optional) Also show hidden resources

with-flags

(Optional) Also show resource flags

__readonly__

(Optional) Read Only

TABLE_resource

(Optional)

resource_name

(Optional) Resource Name

total_used

(Optional) Resource current usage for all VDC

total_unused

(Optional) Resources currently reserved but not used across all VDC

total_free

(Optional) Resource current free for all VDC

total_avail

(Optional) Resource current available across all VDC

total

(Optional) Resources grand total

TABLE_vdc_resource_across_vdcs

(Optional)

vdc_name

(Optional) VDC name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

used

(Optional) Resource current usage for this VDC

unused

(Optional) Resource reserved for this VDC but currently not used

free

(Optional) Resource current free for this VDC

Command Mode

- /exec

show vdc resource template

show vdc resource template [ <res-mgr-template-known-name-all> ] [ __readonly__ TABLE_template <template_name> { TABLE_resource <resource_name> <min> <max> } ]

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

resource

Show resource configuration for VDC

template

Resource template configuration

res-mgr-template-known-name-all

(Optional) Resource template name

__readonly__

(Optional) Read Only

TABLE_template

(Optional)

template_name

(Optional) Resource Template Name

TABLE_resource

(Optional)

resource_name

(Optional) Resource Name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

Command Mode

- /exec

show version

show version [ __readonly__ <header_str> <bios_ver_str> [ <loader_ver_str> ] <kickstart_ver_str> [ <sys_ver_str> ] <bios_cmpl_time> <kick_file_name> <kick_cmpl_time> <kick_tmstmp> [ <isan_file_name> ] [ <isan_cmpl_time> ] [ <isan_tmstmp> ] [ <boot_lxc_mode> ] <chassis_id> [ <module_id> ] <cpu_name> <memory> <mem_type> <proc_board_id> <host_name> <bootflash_size> [ <slot0_size> ] [ <slot1_size> ] <kern_uptm_days> <kern_uptm_hrs> <kern_uptm_mins> <kern_uptm_secs> [ <rr_usecs> ] [ <rr_ctime> ] <rr_reason> <rr_sys_ver> <rr_service> <manufacturer> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> + ] ]

Syntax Description

show

version

Show the software version

__readonly__

(Optional)

header_str

(Optional)

bios_ver_str

(Optional)

loader_ver_str

(Optional)

kickstart_ver_str

(Optional)

sys_ver_str

(Optional)

bios_cmpl_time

(Optional)

kick_file_name

(Optional)

kick_cmpl_time

(Optional)

kick_tmstmp

(Optional)

isan_file_name

(Optional)

isan_cmpl_time

(Optional)

isan_tmstmp

(Optional)

boot_lxc_mode

(Optional)

chassis_id

(Optional)

module_id

(Optional)

cpu_name

(Optional)

memory

(Optional)

mem_type

(Optional)

proc_board_id

(Optional)

host_name

(Optional)

bootflash_size

(Optional)

slot0_size

(Optional)

slot1_size

(Optional)

kern_uptm_days

(Optional)

kern_uptm_hrs

(Optional)

kern_uptm_mins

(Optional)

kern_uptm_secs

(Optional)

rr_usecs

(Optional)

rr_ctime

(Optional)

rr_reason

(Optional)

rr_sys_ver

(Optional)

rr_service

(Optional)

manufacturer

(Optional)

TABLE_smu_list

(Optional)

install_smu_id

(Optional)

TABLE_package_list

(Optional)

package_id

(Optional) Package name

Command Mode

- /exec

show version compatibility

show version compatibility <uri0>

Syntax Description

show

Show running system information

version

Show the software version

compatibility

Show the software compatibility matrix with given image

uri0

Enter URI

Command Mode

- /exec

show version epld

show version epld <uri0> [ __readonly__ <image-info> [ { TABLE_module_info <module-type> <model> <epld-device> <version> } ] ]

Syntax Description

show

Show running system information

version

Show the software version

epld

Show EPLD versions available in EPLD image

uri0

Local URI containing EPLD Image

__readonly__

(Optional)

image-info

(Optional) image file info

TABLE_module_info

(Optional)

module-type

(Optional) module type

model

(Optional) model

epld-device

(Optional) epld device

version

(Optional) version

Command Mode

- /exec

show version image

show version image <uri0> [ __readonly__ <md5_str> <img_file_name> [ <bios_ver_str> ] <sys_ver_str> <img_cmpl_time> [ <img_tmstmp> ] ]

Syntax Description

show

Show running system information

version

Show the software version

image

Show the software version of a given image

uri0

Enter URI

__readonly__

(Optional)

md5_str

(Optional)

img_file_name

(Optional)

bios_ver_str

(Optional)

sys_ver_str

(Optional)

img_cmpl_time

(Optional)

img_tmstmp

(Optional)

Command Mode

- /exec

show version module

show version module <module> [ __readonly__ { TABLE_version <slot> <type> <sw> <interim> <bios> } ]

Syntax Description

show

Show running system information

version

Show the software version

module

Show the software version of a Module

module

Enter module number

__readonly__

(Optional)

TABLE_version

(Optional) Show version info

slot

(Optional) Slot

type

(Optional) image type

sw

(Optional) SW version

interim

(Optional) SW interim version

bios

(Optional) BIOS version

Command Mode

- /exec

show version module epld

show version module <module> epld [ __readonly__ { [ <header_info> ] [ <module> ] [ <mi_iofpga> <version> ] [ <io_fpga> <version> ] [ <mi_iofpga2> <version> ] [ <mi_iofpga3> <version> ] [ <mi_iofpga4> <version> ] [ <mi_iofpga5> <version> ] [ <mi_iofpga6> <version> ] [ <cpu_iofpga> <version> ] [ <db_fpga> <version> ] } ]

Syntax Description

show

Show running system information

version

Show the software version

module

Show the software version of a Module

module

Enter module number

epld

Show a module's current EPLD versions

__readonly__

(Optional)

header_info

(Optional)

module

(Optional)

mi_iofpga

(Optional)

io_fpga

(Optional)

mi_iofpga2

(Optional)

mi_iofpga3

(Optional)

mi_iofpga4

(Optional)

mi_iofpga5

(Optional)

mi_iofpga6

(Optional)

cpu_iofpga

(Optional)

db_fpga

(Optional)

version

(Optional)

Command Mode

- /exec

show virtual-service

show virtual-service [ { list } | { global } | { detail [ name <virt_serv_name> ] } | { core [ name <virt_serv_name_core> ] } ] [ __readonly__ [ <infrastructure_major_version> <infrastructure_minor_version> <total_virtual_services_installed> <total_virtual_services_activated> <machine_types_supported> <machine_types_disabled> <maximum_vcpus_per_virtual_service> TABLE_resource_limits <media_name> <quota> <committed> <available> ] [ TABLE_list <name> <status> <package_name> ] [ TABLE_detail <name> <state> <package_name> <ova_path> <application_name> <application_version> <application_description> <key_type> <signing_method> <licensing_name> <licensing_version> <disk_reservation> <memory_reservation> <cpu_reservation> TABLE_attached_devices <type> <name> <alias> ] [ TABLE_core <name> <name_core> ] ]

Syntax Description

show

Show running system information

virtual-service

Display virtualization service information

global

(Optional) Virtual service global information

list

(Optional) List virtual services

detail

(Optional) Detailed information

core

(Optional) Core information

name

(Optional) Information for a specific virtual service

virt_serv_name

(Optional) Name of a virtual service

virt_serv_name_core

(Optional) Name of a virtual service

__readonly__

(Optional) Read Only

infrastructure_major_version

(Optional) Infrastructure major version

infrastructure_minor_version

(Optional) Infrastructure minor version

total_virtual_services_installed

(Optional) Total virtual services installed

total_virtual_services_activated

(Optional) Total virtual services activated

maximum_vcpus_per_virtual_service

(Optional) Maximum VCPUs per virtual service

machine_types_supported

(Optional) Machine types supported

machine_types_disabled

(Optional) Machine types disabled

TABLE_resource_limits

(Optional) Virtual service global resource limits

media_name

(Optional) Resource name

quota

(Optional) Resource Virtualization quota

committed

(Optional) Resource Virtualization committed

available

(Optional) Resource Virtualization available

TABLE_list

(Optional) Virtual service list table

name

(Optional) Virtual service name

status

(Optional) Virtual service status

package_name

(Optional) Virtual service package name

TABLE_detail

(Optional) Virtual service detail table

name

(Optional) Virtual service name

package_name

(Optional) Virtual service package name

application_name

(Optional) Name of the application

application_version

(Optional) Version of the application

application_description

(Optional) Description of the application

key_type

(Optional) Virtual service key type

signing_method

(Optional) Method used to sign the package

licensing_name

(Optional) Name of the license

licensing_version

(Optional) Version of the license

ova_path

(Optional) Virtual service OVA path

state

(Optional) Virtual service state

disk_reservation

(Optional) Virtual service disk reservation

memory_reservation

(Optional) Virtual service memory reservation

cpu_reservation

(Optional) Virtual service CPU reservation

TABLE_attached_devices

(Optional) Attached devices table

type

(Optional) Type of the attached device

name

(Optional) Name of the attached device

alias

(Optional) Alias for the attached device

TABLE_core

(Optional) Virtual service core table

name

(Optional) Virtual service name

name_core

(Optional) Name of core

Command Mode

- /exec

show virtual-service storage pool list

show virtual-service storage pool list [ __readonly__ [ TABLE_storage <pool_name> <pool_type> <pool_path> ] ]

Syntax Description

show

Show running system information

virtual-service

Display virtualization service storage pool information

storage

Storage information about virtual service

pool

Storage pool information about virtual service

list

List storage pool for virtual service

__readonly__

(Optional) Read Only

TABLE_storage

(Optional) Virtual service storage pool list table

pool_name

(Optional) Virtual service storage pool name

pool_type

(Optional) Virtual service storage pool type

pool_path

(Optional) Virtual service storage pool path

Command Mode

- /exec

show virtual-service tech-support

show virtual-service tech-support

Syntax Description

show

Show running system information

virtual-service

Gather information for virtualization services trouble shooting

tech-support

Gather information for trouble shooting

Command Mode

- /exec

show virtual-service utilization name

show virtual-service utilization name <virt_serv_name> [ __readonly__ [ TABLE_cpu <request> <actual> <state> ] [ TABLE_memory <allocation> <used> ] [ TABLE_storage <name> <alias> <capacity> <used> <available> <usage> ] ]

Syntax Description

show

Show running system information

virtual-service

Display virtualization service utilization information

utilization

Utilization information about virtual service

name

Utilization of a virtual service

virt_serv_name

Name of a virtual service

__readonly__

(Optional) Read Only

TABLE_storage

(Optional) Virtual service storage utilization

name

(Optional) storage device name

alias

(Optional) storage device alias

capacity

(Optional) Capacity 1k blocks

used

(Optional) Used 1k blocks

available

(Optional) Available 1k blocks

usage

(Optional) Usage

TABLE_memory

(Optional) Virtual service memory utilization

allocation

(Optional) Memory allocation

used

(Optional) Memory used

TABLE_cpu

(Optional) Virtual service cpu utilization

request

(Optional) Requested Application Utilization

actual

(Optional) Actual Application Utilization

state

(Optional) CPU state

Command Mode

- /exec

show virtual-service version

show virtual-service version { { installed } | { name <virt_serv_name> installed } } [ __readonly__ <virt_service_name> <application_name> <application_version> ]

Syntax Description

show

Show running system information

virtual-service

Display virtualization service version information

version

Version information about virtual service

installed

Installed version

name

Version of a virtual service

virt_serv_name

Name of a virtual service

__readonly__

(Optional) Read Only

virt_service_name

(Optional) Virtual service name

application_name

(Optional) Application name

application_version

(Optional) Application version

Command Mode

- /exec

show vlan-mgr errors

show vlan-mgr errors

Syntax Description

show

Show running system information

vlan-mgr

Show vlan manager event history

errors

Show vlan manager errors

Command Mode

- /exec

show vlan-mgr event-history

show vlan-mgr event-history

Syntax Description

show

Show running system information

vlan-mgr

Show vlan manager event history

event-history

Show vlan manager event history

Command Mode

- /exec

show vlan

show vlan [ controller ] [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbrief <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <vlanshowinfo-mtu-hdr> { TABLE_mtuinfo <vlanshowinfo-vlanid> <vlanshowinfo-media-type> <vlanshowinfo-vlanmode> } [ <vlanshowrspan-hdr1> ] [ <vlanshowrspan-vlantype> ] [ <vlanshowrspan-hdr2> ] [ <vlanshowrspan-vlanbitmap> ] [ <pvlan-hdr> ] [ <pvlan-section> ] [ <pvlan-stby> ] <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

controller

(Optional) Controller VLAN status

__readonly__

(Optional) Read Only

TABLE_vlanbrief

(Optional) VLAN brief table format

TABLE_mtuinfo

(Optional) MTU information table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

vlanshowinfo-mtu-hdr

(Optional) Vlan info mtu header

vlanshowinfo-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-media-type

(Optional) Select media type

vlanshowinfo-vlanmode

(Optional) VLAN brief VLAN mode

vlanshowrspan-hdr1

(Optional) RSPAN VLAN header for one VLAN

vlanshowrspan-hdr2

(Optional) RSPAN VLAN header for multiple VLANs

vlanshowrspan-vlantype

(Optional) RSPAN VLAN one VLAN rspan or non-rspan

vlanshowrspan-vlanbitmap

(Optional) RSPAN VLAN multiple VLANs

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

pvlan-hdr

(Optional) private vlan section

pvlan-section

(Optional) private vlan section

pvlan-stby

(Optional) private vlan section on standby

Command Mode

- /exec

show vlan access-list

show vlan access-list <name> [ <inp_seqno> ] [ __readonly__ TABLE_vacl <vacl_name> [ <vacl_seqno> ] [ TABLE_list <ip_ipv6_mac> <acl_name> [ TABLE_seqno <seqno> { <permitdeny> [ <proto_str> | <proto> | <ip> | <ipv6> ] { <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_ipv6_addr> <src_ipv6_mask> | <mac_src> <mac_src_wild> | <src_addrgrp> } [ <src_port_op> [ <src_port1_str> ] { <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_ipv6_addr> <dest_ipv6_mask> | <mac_dest> <mac_dest_wild> | <dest_addrgrp> } [ <dest_port_op> [ <dest_port1_str> ] { <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] [ <igmp_type> | <igmp_type_str> ] [ [ <precedence> | <precedence_str> ] [ <tos> | <tos_str> ] | [ <dscp> | <dscp_str> ] | [ <ttl> ] ] [ <log> ] [ <udfs> ] [ <capture_session> ] [ <fragments> ] [ <plen_op> <plen1> [ <plen2> ] ] [ <urg> ] [ <ack> ] [ <psh> ] [ <rst> ] [ <syn> ] [ <fin> ] [ <established> ] [ <http-method> | <http_opt_str> ] [ <tcp-option-length> ] [ <tcp-flags-mask> ] [ <flow_label> ] [ <timerange> ] [ <eth_proto> | <eth_proto_str> ] [ <vlan> ] [ <cos> ] [ <match_count> ] | [ TABLE_match <module> <module_match_count> ] | [ <nve_vni> ] | [ <nve_vni> ] | [ <label1> [ <label2> <label3> <label4> ] ] <remark> } ] [ <action> <actionid> ] ] ]

Syntax Description

show

Show running system information

vlan

Vlan commands

access-list

Vlan access list

name

List name

inp_seqno

(Optional) Sequence number

vacl_name

(Optional) List name

__readonly__

(Optional)

vacl_seqno

(Optional) Sequence number

TABLE_vacl

(Optional)

TABLE_list

(Optional)

ip_ipv6_mac

(Optional) IP/iIPV6/MAC

acl_name

(Optional) Access list name

seqno

(Optional) Sequence number

permitdeny

(Optional) Permit/deny

proto

(Optional) A protocol number

TABLE_seqno

(Optional)

proto_str

(Optional) Protocol name

ip

(Optional) IP

ipv6

(Optional) IPV6

src_any

(Optional) SRCAny

dest_any

(Optional) DESTAny

src_ip_prefix

(Optional) Source IP prefix

src_ip_addr

(Optional) Source IP address

src_ip_mask

(Optional) Source IP mask

mac_src

(Optional) Source MAC address

mac_src_wild

(Optional) Source MAC mask

dest_ip_prefix

(Optional) Destination IP prefix

dest_ip_addr

(Optional) Destination IP address

dest_ip_mask

(Optional) Destination IP mask

mac_dest

(Optional) Destination MAC address

mac_dest_wild

(Optional) Destination MAC mask

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port1_str

(Optional) Source port name

src_port1_num

(Optional) Source port number

src_port2_str

(Optional) Source port name

src_port2_num

(Optional) Source port number

dest_port1_str

(Optional) Destination port name

dest_port1_num

(Optional) Destination port number

dest_port2_str

(Optional) Destination port name

dest_port2_num

(Optional) Destination port number

icmp_type

(Optional) ICMP type

icmp_code

(Optional) ICMP code

icmp_str

(Optional) ICMP message

icmpv6_type

(Optional) ICMP type

icmpv6_code

(Optional) ICMP code

icmpv6_str

(Optional) ICMP message

igmp_type

(Optional) IGMP type

igmp_type_str

(Optional) IGMP type String

precedence

(Optional) precedence

precedence_str

(Optional) precedence string

tos

(Optional) tos

tos_str

(Optional) tos string

dscp

(Optional) dscp

dscp_str

(Optional) dscp string

udfs

(Optional) udfs string

ttl

(Optional) ttl

capture_session

(Optional) capture session

log

(Optional) Log

fragments

(Optional) Fragments

urg

(Optional) URG

ack

(Optional) ACK

psh

(Optional) PSH

rst

(Optional) RST

syn

(Optional) SYN

fin

(Optional) FIN

established

(Optional) ESTABLISHED

http-method

(Optional) http-method

http_opt_str

(Optional) http_option string

tcp-option-length

(Optional) TCP Option size

tcp-flags-mask

(Optional) TCP Flags mask

flow_label

(Optional) IPv6 flow label

timerange

(Optional) Time-range

eth_proto

(Optional) MAC protocol number

eth_proto_str

(Optional) MAC protocol name

vlan

(Optional) VLAN number

cos

(Optional) CoS value

match_count

(Optional) Number of packets matching the ACL

TABLE_match

(Optional)

module

(Optional) Module name

module_match_count

(Optional) Number of packets matching the ACL

nve_vni

(Optional) nve vni

remark

(Optional) Remark String

src_addrgrp

(Optional) Source address group

dest_addrgrp

(Optional) Destination address group

src_portgrp

(Optional) Source port group

dest_portgrp

(Optional) Destination port group

plen_op

(Optional) Source Port operator

plen1

(Optional) Packet length minimum

plen2

(Optional) packet length maximum

label1

(Optional) mpls label one

label2

(Optional) mpls label two

label3

(Optional) mpls label three

label4

(Optional) mpls label four

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec

show vlan access-map

show vlan access-map [ <name> ] [ __readonly__ [ TABLE_vacl <vacl_name> [ TABLE_seqno [ <seqno> ] [ <ip_ipv6_mac> { <match_name> } + [ <action_drop> ] [ <action_log> ] [ <action_fwd> ] [ <action_capture> ] [ <action_redirect> <intf> ] ] [ <statistics> ] ] ] ]

Syntax Description

show

Show running system information

vlan

Vlan commands

access-map

List VLAN access maps

name

(Optional) List name

vacl_name

(Optional) List name

__readonly__

(Optional)

seqno

(Optional) Sequence number

TABLE_vacl

(Optional)

TABLE_seqno

(Optional)

ip_ipv6_mac

(Optional) IP/iIPV6/MAC

match_name

(Optional) Access list name

action_drop

(Optional) DROP

action_log

(Optional) LOG

action_fwd

(Optional) FWD

action_capture

(Optional) CAPTURE

action_redirect

(Optional) REDIRECT

intf

(Optional) Interface traffic is redirected to

statistics

(Optional) STATISTICS

Command Mode

- /exec

show vlan all-ports

show vlan all-ports [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbriefallports <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

all-ports

Show all ports on VLAN

__readonly__

(Optional) Read Only

TABLE_vlanbriefallports

(Optional) VLAN brief table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

- /exec

show vlan counters

show vlan counters [ __readonly__ { TABLE_vlancounters <vlanshowbr-vlanid> [ <l2_ing_ucast_b> ] [ <l2_ing_ucast_p> ] [ <l2_ing_mcast_b> ] [ <l2_ing_mcast_p> ] [ <l2_ing_bcast_b> ] [ <l2_ing_bcast_p> ] [ <l2_egr_ucast_b> ] [ <l2_egr_ucast_p> ] [ <l3_ucast_rcv_b> ] [ <l3_ucast_rcv_p> ] [ <total_rcv_b> ] [ <total_rcv_p> ] [ <total_sent_b> ] [ <total_sent_p> ] } ]

Syntax Description

show

Show running system information

vlan

Vlan commands

counters

display counters

__readonly__

(Optional) Read Only

TABLE_vlancounters

(Optional) vlan counters table format

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

l2_ing_ucast_b

(Optional) L2 Ingress unicast octets

l2_ing_ucast_p

(Optional) L2 Ingress unicast packets

l2_ing_mcast_b

(Optional) L2 Ingress multicast octets

l2_ing_mcast_p

(Optional) L2 Ingress multicast packets

l2_ing_bcast_b

(Optional) L2 Ingress broadcast octets

l2_ing_bcast_p

(Optional) L2 Ingress broadcast packets

l2_egr_ucast_b

(Optional) L2 Egress unicast octets

l2_egr_ucast_p

(Optional) L2 Egress unicast packets

l3_ucast_rcv_b

(Optional) L3 unicast octets in

l3_ucast_rcv_p

(Optional) L3 unicast packets in

total_rcv_b

(Optional) Total octets in

total_rcv_p

(Optional) Total packets in

total_sent_b

(Optional) Total octets out

total_sent_p

(Optional) Total packets out

Command Mode

- /exec

show vlan dot1Q tag native

show vlan dot1Q tag native [ __readonly__ <tag_native_mode> ]

Syntax Description

show

Show running system information

vlan

VTP VLAN status

dot1Q

Display dot1q parameters

tag

Display tag parameters

native

Display native vlan tagging

__readonly__

(Optional) Read Only

tag_native_mode

(Optional) Native vlan tagging mode

Command Mode

- /exec

show vlan fcoe

show vlan fcoe [ <vlan-id> ] [ __readonly__ { TABLE_assoc <orig-id> <tran-id> <assoc-state> } ]

Syntax Description

show

Show running system information

fcoe

FCOE Congiguration

vlan

Original VLAN Status

__readonly__

(Optional) Read Only

TABLE_assoc

(Optional) Association Table Format

vlan-id

(Optional) VLAN ID <1-4094>

orig-id

(Optional) Enter original VLAN-ID being associated with translated ID

tran-id

(Optional) Enter VSAN-ID being associated with VLAN-ID

assoc-state

(Optional) Show Association Status

Command Mode

- /exec

show vlan filter

show vlan filter [ access-map <name> | vlan <vlan> ] [ __readonly__ TABLE_vlan_filter <name> <configured_vlans> ]

Syntax Description

show

Show running system information

vlan

Vlan commands

filter

Information about VLAN filters

access-map

(Optional) Show the VLANs where an access-map is applied

name

(Optional) List name

vlan

(Optional) Show the access-map applied to a VLAN

vlan

(Optional) VLAN number

__readonly__

(Optional)

TABLE_vlan_filter

(Optional)

configured_vlans

(Optional) VLAN numbers

Command Mode

- /exec

show vlan id

show vlan id <vlan-id> [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbriefid <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <vlanshowinfo-mtu-hdr> { TABLE_mtuinfoid <vlanshowinfo-vlanid> <vlanshowinfo-media-type> <vlanshowinfo-vlanmode> } [ <vlanshow-vlanerrbitmap> ] [ <vlanshowrspan-hdr1> ] [ <vlanshowrspan-vlantype> ] [ <vlanshowrspan-hdr2> ] [ <vlanshowrspan-vlanbitmap> ] [ <pvlan-hdr> ] [ <pvlan-id-section> ] [ <pvlan-stby> ] [ <is-vtp-manageable> ] [ <is-internal> ] [ <is-reserved> ] [ <is-rspan> ] [ <is-dynamic-gvrp> ] <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

VLAN status by VLAN id

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional) Read Only

TABLE_vlanbriefid

(Optional) VLAN brief table format

TABLE_mtuinfoid

(Optional) MTU information table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

vlanshowinfo-mtu-hdr

(Optional) Vlan info mtu header

vlanshowinfo-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-media-type

(Optional) Select media type

vlanshowinfo-vlanmode

(Optional) VLAN brief VLAN mode

vlanshow-vlanerrbitmap

(Optional) VLAN error bitmap

vlanshowrspan-hdr1

(Optional) RSPAN VLAN header for one VLAN

vlanshowrspan-hdr2

(Optional) RSPAN VLAN header for multiple VLANs

vlanshowrspan-vlantype

(Optional) RSPAN VLAN one VLAN rspan or non-rspan

vlanshowrspan-vlanbitmap

(Optional) RSPAN VLAN multiple VLANs

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

pvlan-hdr

(Optional) private vlan section

pvlan-id-section

(Optional) private id vlan section

pvlan-stby

(Optional) private vlan section on standby

is-vtp-manageable

(Optional) VTP Manageable VLAN flag

is-internal

(Optional) Internal VLAN flag

is-reserved

(Optional) Reserved VLAN flag

is-rspan

(Optional) RSPAN VLAN flag

is-dynamic-gvrp

(Optional) Dynamic GVRP VLAN flag

Command Mode

- /exec

show vlan id counters

show vlan id <vlan-id> counters [ __readonly__ { TABLE_vlancounters <vlanshowbr-vlanid> [ <l2_ing_ucast_b> ] [ <l2_ing_ucast_p> ] [ <l2_ing_mcast_b> ] [ <l2_ing_mcast_p> ] [ <l2_ing_bcast_b> ] [ <l2_ing_bcast_p> ] [ <l2_egr_ucast_b> ] [ <l2_egr_ucast_p> ] [ <l3_ucast_rcv_b> ] [ <l3_ucast_rcv_p> ] [ <total_rcv_b> ] [ <total_rcv_p> ] [ <total_sent_b> ] [ <total_sent_p> ] } ]

Syntax Description

show

Show running system information

vlan

Vlan commands

id

VLAN status by VLAN id

counters

display counters

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional) Read Only

TABLE_vlancounters

(Optional) vlan counters table format

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

l2_ing_ucast_b

(Optional) L2 Ingress unicast octets

l2_ing_ucast_p

(Optional) L2 Ingress unicast packets

l2_ing_mcast_b

(Optional) L2 Ingress multicast octets

l2_ing_mcast_p

(Optional) L2 Ingress multicast packets

l2_ing_bcast_b

(Optional) L2 Ingress broadcast octets

l2_ing_bcast_p

(Optional) L2 Ingress broadcast packets

l2_egr_ucast_b

(Optional) L2 Egress unicast octets

l2_egr_ucast_p

(Optional) L2 Egress unicast packets

l3_ucast_rcv_b

(Optional) L3 unicast octets in

l3_ucast_rcv_p

(Optional) L3 unicast packets in

total_rcv_b

(Optional) Total octets in

total_rcv_p

(Optional) Total packets in

total_sent_b

(Optional) Total octets out

total_sent_p

(Optional) Total packets out

Command Mode

- /exec

show vlan id vn-segment

show vlan id <vlan-id> vn-segment [ __readonly__ <vlanshowinfo-segid-hdr> { TABLE_seginfoid <vlanshowinfo-seg-vlanid> <vlanshowinfo-segment-id> } <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

VLAN status by VLAN id

vn-segment

Show vn-segment mapping

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional) Read Only

TABLE_seginfoid

(Optional) Segment id information table format

vlanshowinfo-segid-hdr

(Optional) Vlan info segment id header

vlanshowinfo-seg-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-segment-id

(Optional) Vlan info SEGMENT ID

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

- /exec

show vlan mib private-vlan type

show vlan [ id <vlan-id> ] mib private-vlan type [ __readonly__ <start> <vlan> <pvlan-type> <primary> ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

type

Private VLAN type information

mib

mib

__readonly__

(Optional) Read Only

start

(Optional) Start

vlan

(Optional) vlan

pvlan-type

(Optional) PVLAN Type

primary

(Optional) associated to primary

Command Mode

- /exec

show vlan name

show vlan name <vname> [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbriefname <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <vlanshowinfo-mtu-hdr> { TABLE_mtuinfoname <vlanshowinfo-vlanid> <vlanshowinfo-media-type> <vlanshowinfo-vlanmode> } [ <vlanshowrspan-hdr1> ] [ <vlanshowrspan-vlantype> ] [ <vlanshowrspan-hdr2> ] [ <vlanshowrspan-vlanbitmap> ] <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

name

VLAN status by VLAN name

vname

A vlan name with size 32 (128 if long vlan name enabled)

__readonly__

(Optional) Read Only

TABLE_vlanbriefname

(Optional) VLAN brief table format

TABLE_mtuinfoname

(Optional) MTU information table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

vlanshowinfo-mtu-hdr

(Optional) Vlan info mtu header

vlanshowinfo-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-media-type

(Optional) Select media type

vlanshowinfo-vlanmode

(Optional) VLAN brief VLAN mode

vlanshowrspan-hdr1

(Optional) RSPAN VLAN header for one VLAN

vlanshowrspan-hdr2

(Optional) RSPAN VLAN header for multiple VLANs

vlanshowrspan-vlantype

(Optional) RSPAN VLAN one VLAN rspan or non-rspan

vlanshowrspan-vlanbitmap

(Optional) RSPAN VLAN multiple VLANs

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

- /exec

show vlan private-vlan

show vlan [ id <vlan-id> ] private-vlan [ __readonly__ [ { TABLE_pvlan_primary <vlan-key> [ <primary> ] [ <secondary> ] <pvlan-type> [ <ports> + ] } ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

__readonly__

(Optional) Read Only

TABLE_pvlan_primary

(Optional) Pvlan primary vlan table

vlan-key

(Optional) Vlan key

primary

(Optional) Primary VLAN

secondary

(Optional) Secondary VLAN

pvlan-type

(Optional) PVLAN Type

ports

(Optional) Port list

Command Mode

- /exec

show vlan private-vlan interface host

show vlan private-vlan interface [ <if> ] host [ next <data> ] [ __readonly__ <start> <interface-id> <secondary-vlan> ]

Syntax Description

show

Show running system information

vlan

VLAN status

private-vlan

Private VLAN information

interface

Show interface status and information

if

(Optional) Interface id

host

private-vlan host

next

(Optional) next-entry

data

(Optional) ignore junk value

__readonly__

(Optional) Read Only

start

(Optional) Start

interface-id

(Optional) Interface

secondary-vlan

(Optional) Secondary Vlan

Command Mode

- /exec

show vlan private-vlan interface mapping

show vlan private-vlan interface [ <if> ] mapping [ __readonly__ <start> <interface-id> <multi-primary> <secondary-vlan> <two-way> ]

Syntax Description

show

Show running system information

vlan

VLAN status

private-vlan

Private VLAN information

interface

Show interface status and information

if

(Optional) Interface id

mapping

private-vlan mapping

__readonly__

(Optional) Read Only

start

(Optional) Start

interface-id

(Optional) Interface

multi-primary

(Optional) multiple primay capable

secondary-vlan

(Optional) seconadry vlans bitmap

two-way

(Optional) multiple primay capable

Command Mode

- /exec

show vlan private-vlan interface mode

show vlan private-vlan interface [ <if> ] mode [ next <data> ] [ __readonly__ <start> <interface-id> <port-mode> ]

Syntax Description

show

Show running system information

vlan

VLAN status

private-vlan

Private VLAN information

interface

Show interface status and information

if

(Optional) Interface id

mode

private-vlan port mode

next

(Optional) next-entry

data

(Optional) ignore junk value

__readonly__

(Optional) Read Only

start

(Optional) Start

interface-id

(Optional) Interface

port-mode

(Optional) Port mode

Command Mode

- /exec

show vlan private-vlan interface trunk

show vlan private-vlan interface [ <if> ] trunk [ __readonly__ <start> <interface-id> <dynamic-state> <encap-type> <native-vlan> <secondary-vlans> <normal-vlans> <dynamic-status> <encap-oper-type> ]

Syntax Description

show

Show running system information

vlan

VLAN status

private-vlan

Private VLAN information

interface

Show interface status and information

if

(Optional) Interface id

trunk

pvlan trunk

__readonly__

(Optional) Read Only

start

(Optional) Start

interface-id

(Optional) Interface

dynamic-state

(Optional) dynamic state

encap-type

(Optional) encapsulation type

native-vlan

(Optional) native vlan

secondary-vlans

(Optional) secondary vlans

normal-vlans

(Optional) normal vlans

dynamic-status

(Optional) dynamic status

encap-oper-type

(Optional) encap oper type

Command Mode

- /exec

show vlan private-vlan mapping

show vlan [ id <vlan-id> ] private-vlan mapping [ next <data> ] [ __readonly__ <start> <vlan-id> <primary> ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

mapping

private-vlan mapping

next

(Optional) next-entry

data

(Optional) ignore junk value

__readonly__

(Optional) Read Only

start

(Optional) Start

vlan-id

(Optional) secondary

primary

(Optional) primary-vlan

Command Mode

- /exec

show vlan private-vlan type

show vlan [ id <vlan-id> ] private-vlan type [ __readonly__ [ { TABLE_pvlantype <vlan-num> <pvlan-type> } ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

type

Private VLAN type information

__readonly__

(Optional) Read Only

TABLE_pvlantype

(Optional) Pvlan type table

vlan-num

(Optional) vlan

pvlan-type

(Optional) PVLAN Type

Command Mode

- /exec

show vlan reserved

show vlan reserved [ __readonly__ { TABLE_reserved <ivusage-vlanid> <ivusage-desc> } <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

reserved

Internal reserved VLANs

__readonly__

(Optional) Read Only

TABLE_reserved

(Optional) Internal reserved VLAN table format

ivusage-vlanid

(Optional) internal vlan usage VLAN id

ivusage-desc

(Optional) internal reserved vlan usage description

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

- /exec

show vlan xbrief

show vlan xbrief [ controller | cli ] [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbriefxbrief <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

xbrief

All VLAN status in brief

controller

(Optional) Controller VLAN status

cli

(Optional) CLI VLAN status

__readonly__

(Optional) Read Only

TABLE_vlanbriefxbrief

(Optional) VLAN brief table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

- /exec

show vlan xsummary

show vlan xsummary [ __readonly__ <vlansum-all-vlan> <vlansum-vtp-vlan> <vlansum-ext-vlan> <vlansum-max-supported-vlan> <vlansum-carved-vlan> <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

xsummary

VLAN summary information

__readonly__

(Optional) Read Only

vlansum-all-vlan

(Optional) Show vlan summary Total

vlansum-vtp-vlan

(Optional) Show vlan summary Number of normal vlans

vlansum-ext-vlan

(Optional) Show vlan summary Number of extended vlans

vlansum-max-supported-vlan

(Optional) Show vlan summary Max supported vlans

vlansum-carved-vlan

(Optional) Show vlan summary Number of carved sdn vlans

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

- /exec

show vmtracker

show vmtracker [ connection <conn_name> ] { { info { { [ interface <intf_id> ] { summary | detail | host | vm | port-group } } | { vxlan-segment | vxlan-vms } } } | event-history }

Syntax Description

show

Show running system information

vmtracker

Show vmtracker info

connection

(Optional) Show vmtracker configured connections

conn_name

(Optional) Show vmtracker Connection name

info

Display vmtracker information

interface

(Optional) Display vmtracker interface information

intf_id

(Optional) Interface name to display

summary

Display a summary of vmtracker information

detail

Display vmtracker information details

host

Display vmtracker host information

vm

Display vmtracker related Virtual Machine information

port-group

Display vmtracker related port-group information

vxlan-segment

Print all segment info

vxlan-vms

Print all vm info

event-history

Display vmtracker related event-history

Command Mode

- /exec

show vmtracker certificate

show vmtracker certificate

Syntax Description

show

Show running system information

vmtracker

VMTRACKER commands

certificate

Show the default certificate used

Command Mode

- /exec

show vmtracker fabric auto-config

show vmtracker fabric auto-config [ interface <intf_id> ] [ vlan <vlan_id> ] [ status { success | pending | failure | skipped } ]

Syntax Description

show

Show running system information

vmtracker

VMTRACKER commands

fabric

VM Tracker Fabric paramters

auto-config

VM Tracker Fabric AutoConfiguration

interface

(Optional) Display vmtracker interface information

intf_id

(Optional) Interface name to display

vlan

(Optional) vlan to display

vlan_id

(Optional) VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

status

(Optional) Auto-config status

success

(Optional) Success

pending

(Optional) Pending

failure

(Optional) Failure

skipped

(Optional) Skipped

Command Mode

- /exec

show vmtracker status

show vmtracker [ connection <conn_name> ] status [ __readonly__ { TABLE_connection <name> <host_or_ip> <conn_status> } ]

Syntax Description

__readonly__

(Optional)

TABLE_connection

(Optional)

name

(Optional)

host_or_ip

(Optional)

conn_status

(Optional)

show

Show running system information

vmtracker

Show vmtracker info

connection

(Optional) Show vmtracker configured connections

conn_name

(Optional) Show vmtracker Connection name

status

Show vmtracker connection status

Command Mode

- /exec

show vni hardware counters

show vni hardware counters

Syntax Description

show

Show running system information

vni

vni

hardware

hardware

counters

counters

Command Mode

- /exec

show vpc

show vpc { <vpc-number> | brief vpc <vpc-number> } [ __readonly__ [ <vpc-hdr> ] [ <vpc-is-es> ] [ <vpc-not-es> ] [ TABLE_vpc <vpc-id> <vpc-ifindex> <vpc-port-state> <phy-port-if-removed><vpc-thru-peerlink> <vpc-consistency> { [ <vpc-consistency-reason> ] [ <vpc-consistency-status> ] } <up-vlan-bitset> <es-attr> ] <vpc-end> ]

Syntax Description

vpc

Virtual Port Channel configuration

brief

Brief display of vPC status

vpc-number

Enter a Virtual Port Channel number

__readonly__

(Optional) Read Only

vpc-hdr

(Optional) Start of vPC table

vpc-is-es

(Optional) Flag to indicate vPC+ complex

vpc-not-es

(Optional) Flag to indicate vPC complex

TABLE_vpc

(Optional) vPC table

vpc-id

(Optional) vPC id

vpc-ifindex

(Optional) vPC ifindex

vpc-port-state

(Optional) vPC port state

vpc-consistency

(Optional) vPC global configuration consistency

vpc-consistency-reason

(Optional) vPC consistency reason

vpc-consistency-status

(Optional) vPC consistency reason

up-vlan-bitset

(Optional) vPC UP VLAN bitset

es-attr

(Optional) vPC+ attributes

vpc-end

(Optional) End of table

Command Mode

- /exec

show vpc

show vpc [ brief ] [ __readonly__ <vpc-domain-id> [ <vpc-l2mp-switch-id> ] <vpc-peer-status> <vpc-peer-status-reason> <vpc-peer-keepalive-status> [ <vpc-peer-l2mp-status> ] <vpc-peer-consistency> { [ <vpc-peer-consistency-reason> ] [ <vpc-per-vlan-peer-consistency> ] <vpc-peer-consistency-status> } <vpc-type-2-consistency> { [ <vpc-type-2-consistency-reason> ] <vpc-type-2-consistency-status> } <vpc-role> <num-of-vpcs> [ <track-obj> ] [ <peer-gateway> ] [ <peer-gateway-excluded-vlans> ] <dual-active-excluded-vlans> <vpc-graceful-consistency-check-status> [ <vpc-auto-recovery-status> ] [ <vpc-delay-restore-status> ] [ <vpc-delay-restore-svi-status> ] [ <vpc-delay-peer-link-status> ] <operational-l3-peer> [ <vpc-scale-high-status> ] [ <fp-enhanced-load-balancing> ] [ <vpc-per-vlan-peer-consistency> ] <vpc-peer-link-hdr> [ { TABLE_peerlink <peer-link-id> <peerlink-ifindex> <peer-link-port-state> <peer-up-vlan-bitset> } ] <vpc-end> <vpc-hdr> [ <vpc-is-es> ] [ <vpc-not-es> ] [ { TABLE_vpc <vpc-id> <vpc-ifindex> <vpc-port-state> <phy-port-if-removed><vpc-thru-peerlink> <vpc-consistency> { [ <vpc-consistency-reason> ] [ <vpc-consistency-status> ] } <up-vlan-bitset> <es-attr> } ] <vpc-end> ]

Syntax Description

vpc

Virtual Port Channel configuration

brief

(Optional) Brief display of vPC status

__readonly__

(Optional) Read Only

TABLE_peerlink

(Optional) vPC peerlink table

TABLE_vpc

(Optional) vPC table

vpc-domain-id

(Optional) vPC domain id

vpc-l2mp-switch-id

(Optional) vPC+ switch ID

vpc-peer-status

(Optional) vPC peer status

vpc-peer-status-reason

(Optional) vPC peer status reason

vpc-peer-keepalive-status

(Optional) vpc peer keepalive status

vpc-peer-l2mp-status

(Optional) vPC fabricpath status

vpc-role

(Optional) vPC role

peer-gateway

(Optional) Peer gateway status

peer-gateway-excluded-vlans

(Optional) peer-gateway excluded VLANs

dual-active-excluded-vlans

(Optional) dual-active excluded VLANs

fp-enhanced-load-balancing

(Optional) Fabricpath enhanced load balancing status

num-of-vpcs

(Optional) Number of vPCs configured

track-obj

(Optional) Track object for vPC

vpc-graceful-consistency-check-status

(Optional) vPC graceful consistency check

vpc-consistency

(Optional) vPC global configuration consistency

vpc-consistency-reason

(Optional) vPC consistency reason

vpc-consistency-status

(Optional) vPC consistency reason

vpc-peer-consistency

(Optional) vPC global configuration consistency

vpc-peer-consistency-reason

(Optional) vPC consistency reason

vpc-peer-consistency-status

(Optional) vPC consistency reason

vpc-per-vlan-peer-consistency

(Optional) vPC per-vlan global configuration consistency

vpc-type-2-consistency

(Optional) vPC type-2 configuration consistency status

vpc-type-2-consistency-reason

(Optional) vPC type-2 configuration consistency reason

vpc-type-2-consistency-status

(Optional) vPC type-2 configuration consistency status

operational-l3-peer

(Optional) Operational Layer 3 peer status

vpc-scale-high-status

(Optional) vPC scale high status

vpc-hdr

(Optional) Start of vPC table

vpc-is-es

(Optional) Flag to indicate vPC+ complex

vpc-not-es

(Optional) Flag to indicate vPC complex

vpc-peer-link-hdr

(Optional) Start of vPC peer-link table

vpc-port-state

(Optional) vPC port state

vpc-end

(Optional) End of table

vpc-id

(Optional) vPC id

vpc-ifindex

(Optional) vPC ifindex

peer-link-id

(Optional) peer link id

peerlink-ifindex

(Optional) peer link ifindex

peer-link-port-state

(Optional) peer-link port state

peer-up-vlan-bitset

(Optional) peer link UP VLAN bitset

up-vlan-bitset

(Optional) vPC UP VLAN bitset

es-attr

(Optional) vPC+ attributes

vpc-auto-recovery-status

(Optional) Auto-recovery status

vpc-delay-restore-status

(Optional) Delay-resotre status

vpc-delay-restore-svi-status

(Optional) Dealy-restore-svi status

vpc-delay-peer-link-status

(Optional) Delay-peer-link status

Command Mode

- /exec

show vpc consistency-parameters

show vpc consistency-parameters { global | vni | interface <if> | vpc <vpc-num> } [ __readonly__ TABLE_vpc_consistency <vpc-param-name> <vpc-param-type> <vpc-param-local-val> <vpc-param-peer-val> ]

Syntax Description

vpc

Virtual Port Channel configuration

consistency-parameters

Show vPC Consistency Parameters

global

Global Parameters

vni

Show vPC Consistency Parameters vni

if

vpc-num

Enter a Virtual Port Channel number

__readonly__

(Optional) Read Only

TABLE_vpc_consistency

(Optional) vPC table

vpc-param-name

(Optional)

vpc-param-type

(Optional)

vpc-param-local-val

(Optional)

vpc-param-peer-val

(Optional)

Command Mode

- /exec

show vpc consistency-parameters vlans

show vpc consistency-parameters vlans [ vnseg ] [ __readonly__ TABLE_vpc_consistency <vpc-param-name> <vpc-param-type> [ <reason_code> ] [ <syserr> ] <vpc-pass-vlans> [ <reason_code> ] ]

Syntax Description

vpc

Virtual Port Channel configuration

consistency-parameters

Show vPC Consistency Parameters

vlans

vlans

vnseg

(Optional) Display vlan to vn-segment map

__readonly__

(Optional) Read Only

TABLE_vpc_consistency

(Optional) vPC table

vpc-param-name

(Optional)

vpc-param-type

(Optional)

vpc-pass-vlans

(Optional)

syserr

(Optional) vPC consistency reason

reason_code

(Optional) vPC consistency reason

Command Mode

- /exec

show vpc orphan-ports

show vpc orphan-ports [ __readonly__ [ { TABLE_orphan_ports <vpc-vlan> <vpc-orphan-ports> } ] ]

Syntax Description

vpc

Virtual Port Channel configuration

orphan-ports

Show ports that are not part of vPC but have common VLANs

__readonly__

(Optional) Read Only

TABLE_orphan_ports

(Optional) vPC orphan ports table

vpc-vlan

(Optional) port vlan

vpc-orphan-ports

(Optional) description of the port

Command Mode

- /exec

show vpc peer-keepalive

show vpc peer-keepalive [ __readonly__ <vpc-peer-keepalive-status> <vpc-keepalive-dest> <vpc-keepalive-send-interface> <vpc-keepalive-receive-interface> <vpc-keepalive-send-tstamp> <vpc-keepalive-receive-tstamp> <vpc-peer-keepalive-up-time> <vpc-keepalive-send-status> <vpc-keepalive-receive-status> <vpc-keepalive-lastupdate> [ <vpc-keepalive-dest> ] <vpc-keepalive-interval> <vpc-keepalive-timeout> <vpc-keepalive-hold-timeout> <vpc-keepalive-vrf> <vpc-keepalive-udp-port> <vpc-keepalive-tos> ]

Syntax Description

vpc

Virtual Port Channel configuration

peer-keepalive

vPC keepalive status

__readonly__

(Optional) Read Only

vpc-peer-keepalive-status

(Optional) vpc peer keepalive status

vpc-keepalive-dest

(Optional) vPC keepalive destination ip address

vpc-keepalive-send-status

(Optional) vPC keepalive send status

vpc-keepalive-receive-status

(Optional) vPC keepalive receive status

vpc-peer-keepalive-up-time

(Optional) keepalive- alive time

vpc-keepalive-send-tstamp

(Optional) vPC keepalive last send timestamp

vpc-keepalive-send-interface

(Optional) vPC keepalive send interface

vpc-keepalive-receive-tstamp

(Optional) vPC keepalive last receive timestamp

vpc-keepalive-receive-interface

(Optional) vPC keepalive receive interface

vpc-keepalive-lastupdate

(Optional) vPC keepalive last update from peer

vpc-keepalive-interval

(Optional) vPC keepalive timeout

vpc-keepalive-timeout

(Optional) vPC keepalive interval

vpc-keepalive-hold-timeout

(Optional) hold timeout

vpc-keepalive-vrf

(Optional) vrf name

vpc-keepalive-udp-port

(Optional) udp port

vpc-keepalive-tos

(Optional) tos value

Command Mode

- /exec

show vpc role

show vpc role [ __readonly__ <vpc-peer-status> <vpc-peer-status-reason> [ <vpc-current-role> ] [ <vpc-es-current-role> ] <dual-active-detected> <vpc-system-mac> <vpc-system-prio> <vpc-local-system-mac> <vpc-local-system-prio><vpc-local-role-prio> <vpc-peer-system-mac> <vpc-peer-system-prio><vpc-peer-role-prio> ]

Syntax Description

vpc

Virtual Port Channel configuration

role

vPC role status

__readonly__

(Optional) Read Only

vpc-peer-status

(Optional) vPC peer status

vpc-peer-status-reason

(Optional) vPC peer status reason

vpc-current-role

(Optional) vPC role

vpc-es-current-role

(Optional) vPC role

dual-active-detected

(Optional) Dual active detection status

vpc-system-mac

(Optional) vPC system mac

vpc-local-system-mac

(Optional) vPC local system mac

vpc-peer-system-mac

(Optional) vPC peer system mac

vpc-system-prio

(Optional) vPC system priority

Command Mode

- /exec

show vpc statistics peer-keepalive

show vpc statistics peer-keepalive [ __readonly__ <vpc-peer-keepalive-status> <vpc-keepalive-counters-tx> <vpc-keepalive-counters-rx> <vpc-keepalive-avg-rx-interval> <vpc-keepalive-peer-state-changes> ]

Syntax Description

vpc

Virtual Port Channel configuration

statistics

Statistics

peer-keepalive

peer keepalive module related statistics

__readonly__

(Optional) Read Only

vpc-peer-keepalive-status

(Optional) vpc peer keepalive status

vpc-keepalive-counters-tx

(Optional) tx counters

vpc-keepalive-counters-rx

(Optional) rx counters

vpc-keepalive-avg-rx-interval

(Optional) avg rx interval in ms

vpc-keepalive-peer-state-changes

(Optional) peer state changes

Command Mode

- /exec

show vpc statistics vpc

show vpc statistics { vpc <vpc_num> | peer-link }

Syntax Description

vpc

Virtual Port Channel configuration

statistics

Statistics

vpc_num

Virtual Port Channel number

peer-link

stats for peer-link

Command Mode

- /exec

show vpc upgrade

show vpc upgrade [ __readonly__ <vpc-upgrade> <delay-svi-timer> <delay-restore-timer> <delay-orphan-port-timer> ]

Syntax Description

show

Show running system information

vpc

Virtual Port Channel configuration

upgrade

show vpc upgrade configuration

__readonly__

(Optional) Read Only

vpc-upgrade

(Optional) vpc upgrade configuration

delay-svi-timer

(Optional) delay svi timer value

delay-restore-timer

(Optional) delay restore timer value

delay-orphan-port-timer

(Optional) delay orphan port suspend timer

Command Mode

- /exec

show vrf

show vrf [ <vrf-name> | <vrf-known-name> | all ] [ order id ] [ detail ] [ passive ] [ __readonly__ TABLE_vrf <vrf_name> <vrf_id> <vrf_state> [ <vrf_reason> ] [ <vrf_pend> ] [ <vpnid> <rd> <vni> <max_routes> <mid_threshold> ] [ { TABLE_tib <tib_id> <tib_af> <tib_nonce> <tib_state> [ <tib_reason> ] [ <tib_pend> ] } ] ]

Syntax Description

show

Show running system information

vrf

Display VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display VRF information for all VRFs

order

(Optional) Specify ordering

id

(Optional) Order by ID

detail

(Optional) Display VRF detail information

passive

(Optional) Display passive VRF information

__readonly__

(Optional)

TABLE_vrf

(Optional)

TABLE_tib

(Optional)

vrf_name

(Optional)

vrf_id

(Optional)

vrf_state

(Optional)

vrf_reason

(Optional)

vrf_pend

(Optional)

vpnid

(Optional)

rd

(Optional)

max_routes

(Optional)

mid_threshold

(Optional)

tib_id

(Optional)

tib_af

(Optional)

tib_nonce

(Optional)

tib_state

(Optional)

tib_reason

(Optional)

tib_pend

(Optional)

vni

(Optional)

Command Mode

- /exec

show vrf

show vrf [ <vrf-name> | <vrf-known-name> | all ]

Syntax Description

show

Show running system information

vrf

Display VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display VRF information for all VRFs

Command Mode

- /exec

show vrf topology

show vrf topology [ order id ] [ detail ] [ __readonly__ TABLE_tib <vrf_name> <tib_af> <tib_name> <tib_id> <tib_state> [ <tib_reason> <tib_pend> ] ]

Syntax Description

show

Show running system information

vrf

Configure VRF parameters

topology

Display topology information

order

(Optional) Specify ordering

id

(Optional) Order by ID

detail

(Optional) Display topology detail information

__readonly__

(Optional)

TABLE_tib

(Optional)

vrf_name

(Optional)

tib_af

(Optional)

tib_name

(Optional)

tib_id

(Optional)

tib_state

(Optional)

tib_reason

(Optional)

tib_pend

(Optional)

Command Mode

- /exec

show vrrp

show vrrp [ [ summary ] | { [ statistics | detail ] [ interface <interface_id> ] [ vr <vr_id> ] [ master | backup | init ] + } ] [ __readonly__ [ [ TABLE_vrrp_group <sh_if_index> <sh_group_id> <sh_group_type> <sh_group_state> <sh_group_preempt> <sh_vip_addr> { [ TABLE_sec_vip_addr <sh_sec_vip_addr> ] } <sh_priority> [ <sh_cfg_priority> <sh_fwd_thr_lower> <sh_fwd_thr_upper> ] <sh_adv_interval> [ <sh_auth_text> ] [ <sh_vmac> ] [ <sh_master_router> ] [ <sh_native_track_intf> <sh_native_track_priotiry> ] { [ TABLE_vrrp_track <sh_track_object_id> <sh_decrement_priority> <sh_track_object_state> ] } [ <sh_bfd_status> <sh_bfd_session> ] ] [ { TABLE_vrrp_statistics [ <if_index> ] [ <grp_id> ] [ <grp_type> ] [ <master_cnt> ] [ <adv_pkts> ] [ <adv_intv_mismatch> ] [ <auth_failure> ] [ <ttl_err> ] [ <zero_pri_adv_rcvd> ] [ <zero_pri_adv_sent> ] [ <type_fl_mismatch> ] [ <addr_mismatch> ] [ <inv_auth> ] [ <auth_mismatch> ] [ <inv_pkt_len> ] } ] [ <total_num_of_grp> ] [ <init_grps> ] [ <backup_grps> ] [ <master_grps> ] [ <vrrp_enabled_ifs> ] [ <mts_rx> ] [ <mts_tx> ] [ <pkt_rx> ] [ <pkt_tx> ] ] + ]

Syntax Description

show

Show running system information

vrrp

Show vrrp information

summary

(Optional) Show vrrp summary

statistics

(Optional) Show vrrp statistics

detail

(Optional) Show detailed information

interface

(Optional) Show vrrp info for the interface

interface_id

(Optional)

vr

(Optional) Show vrrp info for the group

vr_id

(Optional) [1-255] enter IPv4 vr group

master

(Optional) Groups in Master state

backup

(Optional) Groups in Backup state

init

(Optional) Groups in Init state

__readonly__

(Optional) Read only

TABLE_vrrp_group

(Optional) Group detail table

sh_if_index

(Optional) Interface type and number

sh_group_id

(Optional) Group number

sh_group_type

(Optional) Group type

sh_group_state

(Optional) VRRP group state

sh_group_preempt

(Optional) Group preemption statue

sh_vip_addr

(Optional) Virtual IP Address

TABLE_sec_vip_addr

(Optional) Secondary virtual ip address table

sh_sec_vip_addr

(Optional) Secondary virtual ip address

sh_priority

(Optional) Priority of VRRP group

sh_auth_text

(Optional) Authentication text

sh_cfg_priority

(Optional) Configured priority of VRRP group

sh_fwd_thr_lower

(Optional) Lower forwarding threshold

sh_fwd_thr_upper

(Optional) Upper forwarding threshold

sh_adv_interval

(Optional) Advertisement interval

sh_vmac

(Optional) Virtual MAC

sh_master_router

(Optional) Master router

sh_native_track_intf

(Optional) Native tracked interface

sh_native_track_priotiry

(Optional) Decrement priority for Native tracking

TABLE_vrrp_track

(Optional) VRRP tracking table

sh_track_object_id

(Optional) Object id of tracking object

sh_decrement_priority

(Optional) Decrement priority

sh_track_object_state

(Optional) Tracking object state

sh_bfd_status

(Optional) BFD status

sh_bfd_session

(Optional) BFD session status

TABLE_vrrp_statistics

(Optional) VRRP statistics table

if_index

(Optional) Interface type and number

grp_id

(Optional) Group number

grp_type

(Optional) Group type

master_cnt

(Optional) VRRP Master

adv_pkts

(Optional) Advertisement pkts

adv_intv_mismatch

(Optional) Advertisement interval mismatch

auth_failure

(Optional) Auth failure

ttl_err

(Optional) TTL error

zero_pri_adv_rcvd

(Optional) Zero pri adv received

zero_pri_adv_sent

(Optional) Zero pri adv sent

type_fl_mismatch

(Optional) Invalid type field

addr_mismatch

(Optional) Address mismatch

inv_auth

(Optional) Invalid auth type

auth_mismatch

(Optional) Authentication mismatch

inv_pkt_len

(Optional) Invalid pkt length

total_num_of_grp

(Optional) Total Number of Groups Configured

init_grps

(Optional) Init groups

backup_grps

(Optional) Backup groups

master_grps

(Optional) Master groups

vrrp_enabled_ifs

(Optional) Number of VRRP enabled interfaces

mts_rx

(Optional) Total MTS Rx

mts_tx

(Optional) Total MTS Tx

pkt_rx

(Optional) Total Pkt Rx

pkt_tx

(Optional) Total Pkt Tx

Command Mode

- /exec

show vrrp bfd-sessions

show vrrp bfd-sessions [ interface <interface-id> [ to <ipaddress> ] ] [ __readonly__ TABLE_bfd_sess <interface> { <src_addr> | <src_addr_v6> } { <dst_addr> | <dst_addr_v6> } <session_state> <ref_count> <displayed_interface> { TABLE_groups <group_id> <vrrp_state> <bfd_status> <operation> <time> } ]

Syntax Description

show

Show running system information

vrrp

Show vrrp information

bfd-sessions

BFD sessions

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

to

(Optional) To IP address

ipaddress

(Optional) Sessions to IP address

__readonly__

(Optional)

TABLE_bfd_sess

(Optional)

interface

(Optional) Interface

src_addr

(Optional) IPv4 Source address

dst_addr

(Optional) IPv4 Destination address

session_state

(Optional) Session state

ref_count

(Optional) Ref count

displayed_interface

(Optional) Displayed interface

TABLE_groups

(Optional)

group_id

(Optional) Group id

vrrp_state

(Optional) VRRP STATE

bfd_status

(Optional) BFD STATE

operation

(Optional) Operation

time

(Optional) Time

Command Mode

- /exec

show vrrpv3

show vrrpv3 [ brief | detail | statistics ] [ <intf> [ <group_num> ] ] [ <opt_v4_or_v6> ] [ all ] [ __readonly__ [ <global_drops> ] [ [ { TABLE_istats [ <i_intf> ] [ <i_drops> ] [ <ttl> ] [ <checksum> ] [ <version> ] [ <type> ] [ <length> ] [ <badid> ] [ <other> ] } ] [ { TABLE_grp [ <intf> ] [ <id> ] [ <af> ] [ <desc> ] [ <state> ] [ <duration> ] [ <vip> ] [ { TABLE_sec [ <addr> ] [ <prefix> ] } ] [ <vmac> ] [ <adv> ] [ <owner> ] [ <preempt> ] [ <delay> ] [ <delay_rem> ] [ <priority> ] [ <m_addr> ] [ <m_priority> ] [ <m_adv> ] [ <m_expire> ] [ <down> ] [ <down_expire> ] [ <adv_sent> ] [ <adv_err> ] [ <adv_recvd> ] [ <v2adv_sent> ] [ <v2adv_err> ] [ <v2adv_recvd> ] [ <drops> ] [ <incompat> ] [ <conflict> ] [ <bad_count> ] [ <bad_addr> ] [ <bad_config> ] [ <bad_advert> ] [ <bad_state> ] [ <bad_other> ] [ <init_master> ] [ <init_master_time> ] [ <init_backup> ] [ <init_backup_time> ] [ <back_master> ] [ <back_master_time> ] [ <master_back> ] [ <master_back_time> ] [ <mast_init> ] [ <mast_init_time> ] [ <back_init> ] [ <back_init_time> ] } ] ] + [ { TABLE_vbrief [ <intf_b> ] [ <id_b> ] [ <af_b> ] [ <priority_b> ] [ <down_b> ] [ <owner_b> ] [ <preempt_b> ] [ <state_b> ] [ <m_addr_b> ] [ <vip_b> ] } ] ]

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

all

(Optional) All VRRPV3 information

brief

(Optional) Brief output

detail

(Optional) Detail output

statistics

(Optional) Statistics output

opt_v4_or_v6

(Optional) Enter ipv4 or ipv6

intf

(Optional) Interface

group_num

(Optional) Group Number

__readonly__

(Optional)

TABLE_istats

(Optional) Interface-level VRRPv3 statistics

TABLE_grp

(Optional) VRRP Groups

TABLE_sec

(Optional) Secondary Addresses

TABLE_vbrief

(Optional) VRRP Brief

global_drops

(Optional) Total dropped packets

i_intf

(Optional) Interface

i_drops

(Optional) Total dropped packets

ttl

(Optional) Invalid TTL/Hop limit

checksum

(Optional) Invalid checksum

version

(Optional) Invalid version

type

(Optional) Invalid message type

length

(Optional) Invalid length

badid

(Optional) Invalid group ID

other

(Optional) Other

intf

(Optional) Interface

id

(Optional) Group ID

af

(Optional) Address family

desc

(Optional) Description

state

(Optional) Group state

duration

(Optional) Time in current state

vip

(Optional) Primary virtual IP address

addr

(Optional) Secondary virtual IP address

prefix

(Optional) Secondary vIP prefix

vmac

(Optional) Virtual MAC address

adv

(Optional) Advertisement interval

preempt

(Optional) Preemption status

owner

(Optional) Owner mode

delay

(Optional) Preemption delay

delay_rem

(Optional) Preemption delay remaining

priority

(Optional) Priority

m_addr

(Optional) Group master router address

m_priority

(Optional) Group master priority

m_adv

(Optional) Master advertisement interval

m_expire

(Optional) Master expiration

down

(Optional) Master down interval

down_expire

(Optional) Master down expiration

adv_sent

(Optional) Advertisements sent

adv_err

(Optional) Advertisement errors

adv_recvd

(Optional) Advertisements received

v2adv_sent

(Optional) Advertisements sent (v2)

v2adv_err

(Optional) Advertisement errors (v2)

v2adv_recvd

(Optional) Advertisements received (v2)

drops

(Optional) Total dropped packets

incompat

(Optional) v2, Incompatible

conflict

(Optional) Address owner conflicts

bad_count

(Optional) Invalid address count

bad_addr

(Optional) Invalid IP address

bad_config

(Optional) Invalid IP address config

bad_advert

(Optional) Invalid advertisement interval

bad_state

(Optional) Invalid group state

bad_other

(Optional) Other

init_master

(Optional) Init to Master

init_master_time

(Optional) Last Occurrence

init_backup

(Optional) Init to Backup

init_backup_time

(Optional) Last Occurrence

back_master

(Optional) Backup to Master

back_master_time

(Optional) Last Occurrence

master_back

(Optional) Master to Backup

master_back_time

(Optional) Last Occurrence

mast_init

(Optional) Master to Init

mast_init_time

(Optional) Last Occurrence

back_init

(Optional) Backup to Init

back_init_time

(Optional) Last Occurrence

intf_b

(Optional) Interface

id_b

(Optional) Group ID

af_b

(Optional) Address family

priority_b

(Optional) Priority

down_b

(Optional) Master down interval

owner_b

(Optional) Owner mode

preempt_b

(Optional) Preemption status

state_b

(Optional) Group state

m_addr_b

(Optional) Group master router address

vip_b

(Optional) Primary virtual IP address

Command Mode

- /exec

show vrrs client

show vrrs client [ <cname> ] [ __readonly__ { TABLE_client <name> <id> <all> <priority> { TABLE_tags <tname> } } ]

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

client

Information about VRRS clients

cname

(Optional) VRRS client name

__readonly__

(Optional)

TABLE_client

(Optional) VRRS clients

TABLE_tags

(Optional) VRRS tags

name

(Optional) VRRS client name

id

(Optional) VRRS client id

priority

(Optional) Priority

all

(Optional) Client follows all tags

tname

(Optional) VRRS tag name

Command Mode

- /exec

show vrrs pathway

show vrrs pathway [ <intf> ] [ __readonly__ { TABLE_pws <name> <state> <vrrs_push_state> <vmac> <vmac_state> <vmac_dbg> [ <pvmac> ] [ <pvmac_state> ] [ <pvmac_dbg> ] <af> [ <desc> ] <opt> <eval> [ { TABLE_vips <addr> [ <flags> ] } ] } ]

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

pathway

Information about VRRS pathways

intf

(Optional) Interface

__readonly__

(Optional)

TABLE_pws

(Optional) Show VRRS pathways

TABLE_vips

(Optional) Pathway vIP addresses

name

(Optional) Pathway name

state

(Optional) Pathway state

vrrs_push_state

(Optional) VRRS push state

vmac

(Optional) Virtual MAC address

vmac_state

(Optional) Virtual MAC state

vmac_dbg

(Optional) Virtual MAC debug flags

pvmac

(Optional) Previous Virtual MAC address

pvmac_state

(Optional) Previous MAC state

pvmac_dbg

(Optional) Previous MAC debug flags

af

(Optional) Pathway address-family

desc

(Optional) Pathway description

opt

(Optional) Option flags

eval

(Optional) Eval flags

addr

(Optional) Virtual IP address

flags

(Optional) Virtual IP address flags

Command Mode

- /exec

show vrrs pathway address

show vrrs pathway [ <intf> ] address

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

pathway

Information about VRRS pathways

intf

(Optional) Interface

address

Internal information about pathway addresses

Command Mode

- /exec

show vrrs server

show vrrs server [ __readonly__ { TABLE_srv <name> <af> <intf> <state> <vmac> <vip> [ { TABLE_tag <tag> } ] } ]

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

server

Information about VRRS servers

__readonly__

(Optional)

TABLE_srv

(Optional) VRRS Servers

TABLE_tag

(Optional) VRRS tags associated with each server

name

(Optional) VRRS server name

af

(Optional) Address-family

intf

(Optional) Interface

state

(Optional) VRRS server state

vmac

(Optional) Virtual MAC address

vip

(Optional) Virtual IP address

tag

(Optional) VRRS tag

Command Mode

- /exec

show vrrs tag

show vrrs tag [ <tagname> ] [ __readonly__ { TABLE_tag <name> <server> [ { TABLE_client <id> <client> <all> } ] } ]

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

tag

Information about VRRS tags

tagname

(Optional) VRRS tag

__readonly__

(Optional)

TABLE_tag

(Optional) Known VRRS tags

TABLE_client

(Optional) VRRS clients listening

name

(Optional) VRRS tag name

server

(Optional) VRRS server name

id

(Optional) VRRS client id

client

(Optional) VRRS client name

all

(Optional) Client follows all tags

Command Mode

- /exec

show vsan

show vsan [ <id_in> ] [ __readonly__ { TABLE_vsan <id> { [ <name> <state> <interop_mode> <load_balancing> <operational_state> ] | <inactive_vsan_name> | <evfp_control_vsan_name> } } ]

Syntax Description

show

Show running system information

vsan

Vsan commands

id_in

(Optional) VSAN ID range

__readonly__

(Optional) Read Only

TABLE_vsan

(Optional) Table of VSAN's

id

(Optional) VSAN ID

name

(Optional) VSAN name

state

(Optional) VSAN state

interop_mode

(Optional) Interoperability mode

load_balancing

(Optional) Load balancing

operational_state

(Optional) Operational state

inactive_vsan_name

(Optional) Isolated VSAN

evfp_control_vsan_name

(Optional) EVFP isolated VSAN

Command Mode

- /exec

show vsan membership

show vsan [ <id_in> ] membership [ __readonly__ { TABLE_vsan <id> [ <inactive_vsan_name> ] [ <evfp_control_vsan_name> ] [ TABLE_interface <name> ] } ]

Syntax Description

show

Show running system information

vsan

Vsan commands

id_in

(Optional) VSAN ID range

membership

VSAN membership information

__readonly__

(Optional) Read Only

TABLE_vsan

(Optional) VSAN table

id

(Optional) VSAN ID

inactive_vsan_name

(Optional) Isolated VSAN

evfp_control_vsan_name

(Optional) EVFP isolated VSAN

TABLE_interface

(Optional) List of interface members

name

(Optional) Interface name

Command Mode

- /exec

show vsan membership interface

show vsan membership interface <if_in> [ __readonly__ { TABLE_interface <name> <vsan_id_memb> [ <inactive_vsan_name> | <evfp_control_vsan_name> ] <allowed_vsan_list> } ]

Syntax Description

show

Show running system information

vsan

Vsan commands

membership

VSAN membership information

interface

Show interface status and information

if_in

Interface range

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) Interface VSAN table

name

(Optional) Interface Name

vsan_id_memb

(Optional) VSAN ID to which interface belongs

inactive_vsan_name

(Optional) Isolated VSAN

evfp_control_vsan_name

(Optional) EVFP isolated VSAN

allowed_vsan_list

(Optional) Allowed VSAN list

Command Mode

- /exec

show vsan usage

show vsan usage [ __readonly__ { <num_vsans_configured> <configured_range_of_vsans> <vsans_available_to_configure> } ]

Syntax Description

show

Show running system information

vsan

Vsan commands

usage

show VSAN usage in the system

__readonly__

(Optional) Read Only

num_vsans_configured

(Optional) Total VSAN's configured

configured_range_of_vsans

(Optional) Range of VSAN's configured

vsans_available_to_configure

(Optional) VSAN range available to configure

Command Mode

- /exec

show vtp counters

show vtp counters [ __readonly__ <start> <summary_rx> <subset_rx> <request_rx> <summary_tx> <subset_tx> <request_tx> <num_config_rev_error> <num_config_digest_error> <num_v1_summary_error> [ { TABLE_pruning_counters <if_index> <join_tx> <join_rx> <summary_adv_v1_rx> } ] ]

Syntax Description

show

Show running system information

vtp

VTP information

counters

VTP statistics

__readonly__

(Optional) Read Only

start

(Optional) Start

summary_rx

(Optional) Summary advertisements received

subset_rx

(Optional) Subset advertisements received

request_rx

(Optional) Request advertisements received

summary_tx

(Optional) Summary advertisements transmitted

subset_tx

(Optional) Subset advertisements transmitted

request_tx

(Optional) Request advertisements transmitted

num_config_rev_error

(Optional) Number of config revision errors

num_config_digest_error

(Optional) Number of config digest errors

num_v1_summary_error

(Optional) Number of V1 summary errors

TABLE_pruning_counters

(Optional) Pruning counters in table format

if_index

(Optional) Trunk

join_tx

(Optional) Join Transmitted

join_rx

(Optional) Join Received

summary_adv_v1_rx

(Optional) Summary advts received from non-pruning-capable device

Command Mode

- /exec

show vtp datafile

show vtp datafile

Syntax Description

show

Show running system information

vtp

VTP information

datafile

vlan.dat

Command Mode

- /exec

show vtp domain id

show vtp domain id <domain-id> [ __readonly__ <start> <domain_name> <oper-mode> <config_rev> <last_modified_ip> <last_modified_time> <tftp_server> <tftp_file_path> <pruning_mode> <version_in_use> <oper_pruning_mode> ]

Syntax Description

show

Show running system information

vtp

VTP information

domain

VTP administrative domain

id

VTP administrative domain ID

domain-id

Domian index(Domain-id)

__readonly__

(Optional) Read Only

start

(Optional) Start

domain_name

(Optional) VTP Domain Name

oper-mode

(Optional) VTP Mode

config_rev

(Optional) Configuration Revision

last_modified_ip

(Optional) Configuration last modified by

last_modified_time

(Optional) Configuration last modified at

tftp_server

(Optional) TFTP Server IP Address

tftp_file_path

(Optional) TFTP complete path of the file

pruning_mode

(Optional) Pruning mode Enabled/Disabled

version_in_use

(Optional) VTP Version in use

oper_pruning_mode

(Optional) Operational Pruning Mode

Command Mode

- /exec

show vtp interface

show vtp interface [ <interface_range> ] [ __readonly__ [ <start> ] { TABLE_vtp_interface <if_index> <status> } ]

Syntax Description

show

Show running system information

vtp

VTP information

interface

VTP interface status and configuration

interface_range

(Optional) Enter interfaces

__readonly__

(Optional) Read Only

start

(Optional) Start

TABLE_vtp_interface

(Optional) VTP interface configuration in table format

if_index

(Optional) Trunk

status

(Optional) VTP interface status

Command Mode

- /exec

show vtp mibstats

show vtp mibstats [ __readonly__ <start> <summary_rx> <subset_rx> <request_rx> <summary_tx> <subset_tx> <request_tx> <num_config_rev_error> <num_config_digest_error> ]

Syntax Description

show

Show running system information

vtp

VTP information

mibstats

VTP Statistics for MIB

__readonly__

(Optional) Read Only

start

(Optional) Start

summary_rx

(Optional) Summary advertisements received

subset_rx

(Optional) Subset advertisements received

request_rx

(Optional) Request advertisements received

summary_tx

(Optional) Summary advertisements transmitted

subset_tx

(Optional) Subset advertisements transmitted

request_tx

(Optional) Request advertisements transmitted

num_config_rev_error

(Optional) Number of config revision errors

num_config_digest_error

(Optional) Number of config digest errors

Command Mode

- /exec

show vtp password

show vtp password [ domain <domain-id> ] [ __readonly__ <start> <passwd> <password-type> <secret-key> ]

Syntax Description

show

Show running system information

vtp

VTP information

password

VTP password

domain

(Optional) VTP administrative domain

domain-id

(Optional) Domian index(Domain-id)

__readonly__

(Optional) Read Only

start

(Optional) Start

passwd

(Optional) VTP Domain Password

password-type

(Optional) Password Type (1=plaintxt, 2=hidden)

secret-key

(Optional) Secret Key for the password

Command Mode

- /exec

show vtp status

show vtp status [ __readonly__ <start> <version> <config_rev> <max_vlan_supported_local> <num_current_vlans> <oper_mode> <domain_name> <pruning_mode> <oper_pruning_mode> <v2_mode> <trap_enabled> <md5_digest> <last_modified_ip> <last_modified_time> <running-version> <updater_id> <updater_reason> ]

Syntax Description

show

Show running system information

vtp

VTP information

status

VTP domain status

__readonly__

(Optional) Read Only

start

(Optional) Start

version

(Optional) VTP version

config_rev

(Optional) Configuration Revision

max_vlan_supported_local

(Optional) Maximum VLANs supported locally

num_current_vlans

(Optional) Number of existing VLANs

oper_mode

(Optional) VTP Mode

domain_name

(Optional) VTP Domain Name

pruning_mode

(Optional) Pruning Mode

oper_pruning_mode

(Optional) Operational Pruning Mode

v2_mode

(Optional) VTP v2 Mode

trap_enabled

(Optional) trap enabled

md5_digest

(Optional) MD5 Digest

last_modified_ip

(Optional) Configuration last modified by

last_modified_time

(Optional) Configuration last modified at

running-version

(Optional) VTP Version Running

updater_id

(Optional) Local Updater id

updater_reason

(Optional) Local Updater id reason

Command Mode

- /exec

show vtp trunk interface

show vtp trunk interface <if_index> [ __readonly__ <start> <out_if_index> <join_rx> <join_tx> <summary_adv_v1_rx> <pruning_eligible> <vlan_joined_tx> <vlan_joined_rx> <vtp_enabled> ]

Syntax Description

show

Show running system information

vtp

VTP information

trunk

VTP Trunk VLAN

interface

Specify an VTP Trunk interface

if_index

VTP Trunk Port Interface Index

__readonly__

(Optional) Read Only

start

(Optional) Start

out_if_index

(Optional) Returned VTP Trunk Port Interface Index

join_rx

(Optional) Join(s) Received

join_tx

(Optional) Join(s) Transmitted

summary_adv_v1_rx

(Optional) Summary advts received from non-pruning-capable device

pruning_eligible

(Optional) Pruning Eligible

vlan_joined_tx

(Optional) Trunk Port TX Vlans Joined

vlan_joined_rx

(Optional) Trunk Port RX Vlans Joined

vtp_enabled

(Optional) VTP Enabled (Yes(1)/No(0))

Command Mode

- /exec

show vtp vlan

show vtp vlan <vlan-id> [ domain <domain-id> ] [ __readonly__ <start> <status> <type> <vlan_name> <mtu> <said> <ring_number> <bridge_number> <stp_type> <parent_vlan> <trans_vlan1> <trans_vlan2> <bridge_type> <max_are_hop> <max_ste_hop> <crf_backup> <vlan_type_ext> <ifindex> ]

Syntax Description

show

Show running system information

vtp

VTP information

vlan

VTP Domain VLANs

vlan-id

VTP VLAN index(VLAN-id)

domain

(Optional) VTP administrative domain

domain-id

(Optional) Domian index(Domain-id)

__readonly__

(Optional) Read Only

start

(Optional) Start

status

(Optional) VTP VLAN Status - Operational=0,Suspended=1

type

(Optional) VTP VLAN Type

vlan_name

(Optional) VTP VLAN Name

mtu

(Optional) VTP VLAN MTU

said

(Optional) VTP VLAN ID

ring_number

(Optional) VTP VLAN Ring Numeber for FDDI/TR

bridge_number

(Optional) VTP VLAN Bridge Number for FDDI-NET/TR-NET

stp_type

(Optional) VTP VLAN STP Type for FDDI-NET/TR-NET

parent_vlan

(Optional) VTP VLAN Parent VLAN for FDDI/TR

trans_vlan1

(Optional) VTP VLAN Translational VLAN 1

trans_vlan2

(Optional) VTP VLAN Translational VLAN 2

bridge_type

(Optional) VTP VLAN Brdige Type

max_are_hop

(Optional) VTP VLAN Max are-hop count

max_ste_hop

(Optional) VTP VLAN Max ste_hop count

crf_backup

(Optional) VTP VLAN Backup CRF Mode

vlan_type_ext

(Optional) VTP VLAN Type - VTP Managable, Internal, RSPAN, Dynamic GVRP

ifindex

(Optional) VTP VLAN Interface Index

Command Mode

- /exec

Chapter 23. W Show Commands

- show wred-queue qos-group-map

- show wrr-queue qos-group-map

- show wrr unicast-bandwidth

- show wwn interface

- show wwn status

- show wwn switch

- show wwn test

- show wwn vsan-wwn

- show wwn vsan

show wred-queue qos-group-map

show wred-queue qos-group-map [ __readonly__ TABLE_wred_queue_qos_group_map <wred-queue><qos-group-map> ]

Syntax Description

show

Show running system information

wred-queue

Show WRED qos-group information

qos-group-map

Display mapping of the qos-group information

__readonly__

(Optional)

TABLE_wred_queue_qos_group_map

(Optional) XML show wred-queue qos-group-map

Command Mode

- /exec

show wrr-queue qos-group-map

show wrr-queue qos-group-map [ __readonly__ <mcast_queue_id> [ TABLE_wrr_queue <wrr_queue> [ TABLE_qos_group <qos_group> ] ] ]

Syntax Description

show

Show running system information

wrr-queue

Display mapping of traffic priority (CoS) values to L3 Multicast

qos-group-map

Show wrr-queue qos-group-map

__readonly__

(Optional)

mcast_queue_id

(Optional) MCAST Queue ID

TABLE_wrr_queue

(Optional) Table wrr queue

wrr_queue

(Optional) Traffic priority values

TABLE_qos_group

(Optional) Table qos group

qos_group

(Optional) QoS-Group-Map

Command Mode

- /exec

show wrr unicast-bandwidth

show wrr unicast-bandwidth [ __readonly__ TABLE_wrr_unicast_bandwidth <unicast-bandwidth> ]

Syntax Description

show

Show running system information

wrr

unicast bandwidth configuration

unicast-bandwidth

rate in precentage of data rate

__readonly__

(Optional)

TABLE_wrr_unicast_bandwidth

(Optional) XML show wrr unicast-bandwidth

unicast-bandwidth

(Optional) unicast bandwidth value

Command Mode

- /exec

show wwn interface

show wwn interface <if0>

Syntax Description

show

Show running system information

wwn

show wwn information

interface

Show interface WWN

if0

Command Mode

- /exec

show wwn status

show wwn status [ { backplane-prom | block-id <i0> | non-volatile-pss | volatile-pss } ] [ __readonly__ [ TABLE_status <type> <configured> <available> <avbl_percent> <resd> <alarm> ] [ <wwn_start> <wwn_end> <num_of_wwn> <allocated_wwn> <available_wwn> <alloc_status> ] ]

Syntax Description

show

Show running system information

wwn

show wwn information

status

Show overall WWN Usage and Alarm Status

backplane-prom

(Optional) Show WWN block in backplane PROM

block-id

(Optional) Enter a block id.

i0

(Optional) Enter a block id.

non-volatile-pss

(Optional) Show contents of non-volatile PSS

volatile-pss

(Optional) Show contents of volatile PSS

__readonly__

(Optional) Read Only

TABLE_status

(Optional) show wwn status table

type

(Optional) WWN Type

configured

(Optional) Number of Confugured WWNs

available

(Optional) Number of Available WWNs

avbl_percent

(Optional) Available % of WWNs

resd

(Optional) Reserved WWNs

alarm

(Optional) Alarm State

wwn_start

(Optional) Start value of WWN-range

wwn_end

(Optional) End value of WWN-range

num_of_wwn

(Optional) Total Number of WWNs

allocated_wwn

(Optional) Number of Allocated WWNs

available_wwn

(Optional) Number of Available WWNs

alloc_status

(Optional) Block Allocation Status

Command Mode

- /exec

show wwn switch

show wwn switch [ __readonly__ { <sw_wwn> } ]

Syntax Description

show

Show running system information

wwn

show wwn information

switch

Show switch WWN

__readonly__

(Optional) Read Only

sw_wwn

(Optional) The Switch WWN

Command Mode

- /exec

show wwn test

show wwn test { get_swwn_from_pwwn <wwn0> | get_pwwn_from_swwn <wwn1> if_index <i0> | get_ifindex_from_fwwn <wwn2> | get_ifindex_from_pwwn <wwn3> | validate_pwwn_given_swwn <wwn4> pwwn <wwn5> | get_all_pwwn_for_slot <i1> | get_kc_type_given_swwn <wwn6> pwwn <wwn7> | get_ifindex_from_pwwn_swwn <wwn8> pwwn <wwn9> }

Syntax Description

show

show running system information

wwn

show wwn information

test

show wwn information for testing

get_swwn_from_pwwn

show switch wwn from port wwn

wwn0

port wwn

get_pwwn_from_swwn

show port wwn from switch wwn

wwn1

switch wwn

if_index

interface index

i0

Interface index

get_ifindex_from_fwwn

show ifindex from fabric wwn

wwn2

fabric wwn

get_ifindex_from_pwwn

show ifindex from port wwn

wwn3

port wwn

validate_pwwn_given_swwn

validate port wwn for given swwn

wwn4

switch wwn

pwwn

port wwn

wwn5

port wwn

get_all_pwwn_for_slot

show all port wwn for a given slot

i1

Slot number

get_kc_type_given_swwn

show KC type

wwn6

switch wwn

pwwn

port wwn

wwn7

port wwn

get_ifindex_from_pwwn_swwn

show ifindex for given pwwn and swwn

wwn8

switch wwn

pwwn

port wwn

wwn9

port wwn

Command Mode

- /exec

show wwn vsan-wwn

show wwn vsan-wwn [ __readonly__ [ TABLE_wwnvsan <vsan_id> <wwn_conf> ] ]

Syntax Description

show

Show running system information

wwn

show wwn information

vsan-wwn

Show all user configured vsan wwn

__readonly__

(Optional) Read Only

TABLE_wwnvsan

(Optional) vsan-wwn table

vsan_id

(Optional) VSAN ID

wwn_conf

(Optional) wwn configured by user

Command Mode

- /exec

show wwn vsan

show wwn vsan <i0>

Syntax Description

show

Show running system information

wwn

show wwn information

vsan

Show vsan WWN

i0

Command Mode

- /exec

Chapter 24. X Show Commands

- show xml server logging configuration

- show xml server status

show xml server logging configuration

show xml server logging configuration

Syntax Description

show

Show running system information

xml

Show xmlagent logging configuration

server

xml agent server

logging

Show logging configuration and contents of logfile

configuration

Show facility logging configuration

Command Mode

- /exec

show xml server status

show xml server status [ __readonly__ { operational_status <o_status> } { maximum_sessions_configured <max_session> } [ { TABLE_sessions <session_id> <user_name> <start_time> <sap_id> <timeout> <time_remaining_to_timeout> <ip_addr> } ] ]

Syntax Description

show

to display xml agent information

xml

xml agent

server

xml agent server

status

display xml agent information

__readonly__

(Optional)

operational_status

(Optional) run-time info about xml

o_status

(Optional) operational status of the xml

maximum_sessions_configured

(Optional) the max session configured

max_session

(Optional) max sessions number

TABLE_sessions

(Optional) all xml sessions

session_id

(Optional) one xml session id

user_name

(Optional) the xml session user name

start_time

(Optional) the xml session start time

sap_id

(Optional) the mts sap id

timeout

(Optional) inactivity timeout value

time_remaining_to_timeout

(Optional) time remaining to timeout

ip_addr

(Optional) ip address of the session

Command Mode

- /exec

Part II. New, Changed, and Deprecated Commands

- New, Changed, and Deprecated Show Commands in Cisco Nexus 9000 Release 9.2(2)

- New, Changed, and Deprecated Show Commands in Cisco Nexus 9000 Release 9.2(3)

- New, Changed, and Deprecated Show Commands in Cisco Nexus 9000 Release 9.2(4)

Chapter 25. New, Changed, and Deprecated Show Commands in Cisco Nexus 9000 Release 9.2(2)

- New Show Commands in Cisco NX-OS Release 9.2(2)

- Changed Show Commands in Cisco NX-OS Release 9.2(2)

- Deprecated Show Commands in Cisco NX-OS Release 9.2(2)

New Show Commands in Cisco NX-OS Release 9.2(2)

The following commands are added in this release.

- show consistency-checker kim

- show consistency-checker vxlan infra [ detail ]

- show consistency-checker vxlan l2 [ detail ]

- show consistency-checker vxlan l3 [ verbose ]

- show forwarding distribution multicast vxlan dsg-db

- show hardware profile packet-drop { status | data [ instance <cap_instance> ] | event [ instance <cap_instance> ] }

- show icam health [ __readonly__ { <Version> } [ { TABLE_cpu <CpuTypeName> <CpuTypeValue> } ] [ { TABLE_mem <MemTypeName> <MemTypeValue> } ] [ { TABLE_ps <PsTypeName> <PsTypeValue> } ] ]

- show icam itd [ __readonly__ { <Version> } [ { TABLE_svc <Svc> <DG> [ { TABLE_stats <OrigNode> <AssignTo> <Mode> <PktCnt> <PktPct> } ] } ] ]

- show icam prediction resource acl_tcam module <module> inst <inst> trend [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries1> <Free_Entries1> <Percent_Util1> <Feature_Entries2> <Free_Entries2> <Percent_Util2> <Feature_Entries3> <Free_Entries3> <Percent_Util3> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used1> <Free1> <Util1> <Used2> <Free2> <Util2> <Used3> <Free3> <Util3> } ] ]

- show interface <ifeth_ctr> counters [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

- show interface <ifeth_ctr> counters snmp [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

- show nxapi syntax <cli>

- show port-channel scale-fanout

- show postcard-telemetry exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> ]

- show postcard-telemetry flow-profile [ name ] [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <dscp> <age> <latency> ]

- show postcard-telemetry monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]

- show postcard-telemetry queue-profile [ name ] [ <queue-profilename> ] [ __readonly__ <queue-profile> <description> <depth> <latency> ]

- show postcard-telemetry sessions [ <monitorname> ] [ __readonly__ <monitor> ]

- show postcard-telemetry watchlist [ name ] [ { <watchlistname> } ] [ __readonly__ <watchlist> <use_count> <description> <num_aces> <ace_seq_num> <ace_action> <ace_type> <ace_sip> <ace_sip_len> <ace_dip> <ace_dip_len> ]

- show system image-verification

- show system poap

- show system security [ common-criteria ] [ __readonly__ { [ <common_criteria_o_status> ] } ]

- show system simulate fan-presence

- show ttag brief [ __readonly__ [ TABLE_ttag <ttag-ifindex> <state> ] <ttag-end> ]

Changed Show Commands in Cisco NX-OS Release 9.2(2)

The following commands are changed in this release.

- OLD: show banner exec

- NEW: show banner exec [ __readonly__ { banner_msg <b_msg> } ]

- OLD: show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ multihop ] | [ module <module_no> ] | [ interface <intf_id> ] | [ application <bfd_cli_client_names> ] | [ { src-ip <src_ip> | src-ipv6 <src_ipv6> } ] | [ { dest-ip <dest_ip> | dest-ipv6 <dest_ipv6> } ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ details ] [ __readonly__ TABLE_bfdNeighbor <local_disc> [ <header> ] [ <sess_type> ] [ <vrf_name> ] [ <src_ip_addr> ] [ <src_ipv6_addr> ] [ <dest_ip_addr> ] [ <dest_ipv6_addr> ] [ <remote_disc> ] [ <local_state> ] [ <remote_state> ] [ <holddown> ] [ <cur_detect_mult> ] [ <intf> ] [ <echo> ] [ <echo_tx> ] [ <local_diag> ] [ <demand> ] [ <poll> ] [ <min_tx> ] [ <min_rx> ] [ <local_multi> ] [ <dectect_timer> ] [ <down_count> ] [ <tx_interval> ] [ <rx_count> ] [ <rx_avg> ] [ <rx_min> ] [ <rx_max> ] [ <last_rx> ] [ <tx_count> ] [ <tx_avg> ] [ <tx_min> ] [ <tx_max> ] [ <last_tx> ] [ <app> ] [ <up_time> ] [ <version> ] [ <diag> ] [ <state_bit> ] [ <demand_bit> ] [ <poll_bit> ] [ <final_bit> ] [ <multiplier> ] [ <length> ] [ <my_disc> ] [ <your_disc> ] [ <min_tx_interval> ] [ <req_min_rx> ] [ <min_echo_interval> ] [ <out_str> ] [ <host_lc> ] [ <down_reason> ] [ <no_host_reason> ] [ <parent> ] [ <per_link_str> ] [ <auth> ] [ <auth_bit> ] [ <print_details> ] ]

- NEW: show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ multihop ] | [ module <module_no> ] | [ interface <intf_id> ] | [ application <bfd_cli_client_names> ] | [ { src-ip <src_ip> | src-ipv6 <src_ipv6> } ] | [ { dest-ip <dest_ip> | dest-ipv6 <dest_ipv6> } ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ details ] [ __readonly__ TABLE_bfdNeighbor <local_disc> [ <header> ] [ <sess_type> ] [ <vrf_name> ] [ <src_ip_addr> ] [ <src_ipv6_addr> ] [ <dest_ip_addr> ] [ <dest_ipv6_addr> ] [ <remote_disc> ] [ <local_state> ] [ <remote_state> ] [ <holddown> ] [ <cur_detect_mult> ] [ <intf> ] [ <echo> ] [ <echo_tx> ] [ <local_diag> ] [ <demand> ] [ <poll> ] [ <min_tx> ] [ <min_rx> ] [ <local_multi> ] [ <detect_timer> ] [ <down_count> ] [ <tx_interval> ] [ <rx_count> ] [ <rx_avg> ] [ <rx_min> ] [ <rx_max> ] [ <last_rx> ] [ <tx_count> ] [ <tx_avg> ] [ <tx_min> ] [ <tx_max> ] [ <last_tx> ] [ <app> ] [ <up_time> ] [ <version> ] [ <diag> ] [ <state_bit> ] [ <demand_bit> ] [ <poll_bit> ] [ <final_bit> ] [ <multiplier> ] [ <length> ] [ <my_disc> ] [ <your_disc> ] [ <min_tx_interval> ] [ <req_min_rx> ] [ <min_echo_interval> ] [ <out_str> ] [ <host_lc> ] [ <down_reason> ] [ <no_host_reason> ] [ <parent> ] [ <per_link_str> ] [ <auth> ] [ <auth_bit> ] [ <print_details> ] ]

- OLD: show cli list [ detail | recurse | <component> | <max-per-cmd> ] +

- NEW: show cli list [ detail | recurse | <component> | <max-per-cmd> | has-xml-out ] +

- OLD: show configuration session nx-api rest [ with-dn ]

- NEW: show configuration session nx-api rest [ with-dn | for-cr ]

- OLD: show dot1x [ __readonly__ <sys_auth_ctrl> <proto_ver> ]

- NEW: show dot1x [ __readonly__ <sys_auth_ctrl> <proto_ver> <mac_move> ]

- OLD: show dot1x all [ __readonly__ <sys_auth_ctrl> <proto_ver> TABLE_all <if_index> TABLE_allpae <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] ]

- NEW: show dot1x all [ __readonly__ <sys_auth_ctrl> <proto_ver> <mac_move> TABLE_all <if_index> TABLE_allpae <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] ]

- OLD: show dot1x all details [ __readonly__ <sys_auth_ctrl> <proto_ver> TABLE_alldetail <if_index> TABLE_allpaedetail <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <no_of_clients> ] [ <port_status_no_clients> ] [ { TABLE_if_auth_clients [ <supp_mac_addr> ] [ <auth_domain> ] [ <auth_sm_state> ] [ <auth_bend_sm_state> ] [ <port_status> ] [ <authentication_method> ] [ <authenticated_by> ] [ <reauth_period_client> ] [ <reauth_action> ] [ <time_to_next_reauth> ] [ <auth_vlan> ] } ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] [ <no_of_supp_clients> ] [ <auth_mac_addr> ] [ <supp_sm_state> ] [ <supp_bend_sm_state> ] [ <supp_port_status> ] ]

- NEW: show dot1x all details [ __readonly__ <sys_auth_ctrl> <proto_ver> <mac_move> TABLE_alldetail <if_index> TABLE_allpaedetail <pae_type> [ <port_control> ] [ <host_mode> ] [ <quiet_period> ] [ <inactivity_period> ] [ <tx_period> ] [ <max_req> ] [ <reauth> ] [ <rate_limit_period> ] [ <supp_timeout> ] [ <server_timeout> ] [ <reauth_server> ] [ <reauth_period> ] [ <reauth_max> ] [ <mac_auth_bypass> ] [ <no_of_clients> ] [ <port_status_no_clients> ] [ { TABLE_if_auth_clients [ <supp_mac_addr> ] [ <auth_domain> ] [ <auth_sm_state> ] [ <auth_bend_sm_state> ] [ <port_status> ] [ <authentication_method> ] [ <authenticated_by> ] [ <reauth_period_client> ] [ <reauth_action> ] [ <time_to_next_reauth> ] [ <auth_vlan> ] } ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] [ <no_of_supp_clients> ] [ <auth_mac_addr> ] [ <supp_sm_state> ] [ <supp_bend_sm_state> ] [ <supp_port_status> ] ]

- OLD: show event manager system-policy [ all | <policy-name> ] [ __readonly__ { <sys-pol-details> } ]

- NEW: show event manager system-policy [ all | <policy-name> ] [ __readonly__ { [ TABLE_eem [ <thresh_min> ] [ <thresh_max> ] <event_name> <event_description> <event_overridable> ] } ]

- OLD: show fabric multicast { ipv4 { mroute [ { <v4_group> [ <v4_source> ] } ] | ssm-range | rp-grange | sa-ad-route [ { <v4_group> [ <v4_source> ] } ] } | ipv6 { mroute [ { <v6_group> [ <v6_source> ] } ] | ssm-range | rp-grange | sa-ad-route [ { <v4_group> [ <v4_source> ] } ] } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context_name> <nlri_type> <vnid> [ TABLE_mroute <mroute> { TABLE_node <node_addr> <real_join> <sim_join> <rpf_nbr> } ] [ TABLE_rp <border_leaf_addr> { TABLE_rp_grange <rp_grange_desc> } ] [ TABLE_ssm <border_leaf_addr> { TABLE_ssm_range <ssm_range_desc> } ] ]

- NEW: show fabric multicast { ipv4 { mroute [ { <v4_group> [ <v4_source> ] } ] | ssm-range | rp-grange | sa-ad-route [ { <v4_group> [ <v4_source> ] } ] } | ipv6 { mroute [ { <v6_group> [ <v6_source> ] } ] | ssm-range | rp-grange | sa-ad-route [ { <v4_group> [ <v4_source> ] } ] } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context_name> <nlri_type> <vnid> [ TABLE_mroute <mroute> <mroute_uptime> { TABLE_node <node_addr> <node_uptime> <real_join> <sim_join> <rpf_nbr> } ] [ TABLE_rp <border_leaf_addr> { TABLE_rp_grange <rp_grange_desc> } ] [ TABLE_ssm <border_leaf_addr> { TABLE_ssm_range <ssm_range_desc> } ] ]

- OLD: show fabricpath isis [ <l2mp-isis-tag> ] database [ <level> ] [ mgroup ] [ detail | advertise | summary ] [ <lid> ] { [ zero-sequence ] | [ router-id <rid> ] | [ adjacency <adj-id> ] } [ __readonly__ [ TABLE_process_tag <process-tag-out> [ <dbase-hname-absent-out> ] [ TABLE_lsp_name <dbase-lsp-name-out> <dbase-lsp-status-out> <dbase-lsp-absent-out> [ <dbase-lsp-seqnum-out> <dbase-lsp-cksum-out> <dbase-lsp-lifetime-out> <dbase-att-out> <dbase-partition-out> <dbase-overload-out> <dbase-istype-out> ] [ <dbase-lsp-instance-out> [ TABLE_lsp_tlv <dbase-lsp-tlv-name-out> [ <dbase-lsp-area-addr-out> ] [ <dbase-lsp-is-nbr-name-out> <dbase-lsp-is-nbr-metric-out> <dbase-lsp-is-nbr-ext-metric-out> ] [ <dbase-lsp-es-nbr-name-out> <dbase-lsp-es-nbr-metric-out> <dbase-lsp-es-nbr-ext-metric-out> ] [ <dbase-lsp-auth-type-out> <dbase-lsp-auth-len-out> ] [ <dbase-lsp-ext-is-name-out> <dbase-lsp-ext-is-metric-out> ] [ <dbase-lsp-ip-ri-addr-out> <dbase-lsp-ip-ri-mask-out> <dbase-lsp-ip-ri-metric-out> <dbase-lsp-ip-ri-ext-metric-out> <dbase-lsp-ip-ri-up-down-out> ] [ TABLE_lsp_nlpid <dbase-lsp-prot-support-out> ] [ <dbase-lsp-ip-addr-out> ] [ <dbase-lsp-ipv6-addr-out> ] [ <dbase-lsp-hname-out> <dbase-lsp-hname-len-out> ] [ <dbase-lsp-tlv-unknown-out> <dbase-lsp-tlv-len-out> ] [ <dbase-lsp-extip-addr-out> <dbase-lsp-extip-prefix-len-out> <dbase-lsp-extip-metric-out> <dbase-lsp-extip-up-down-out> ] [ <dbase-lsp-extipv6-addr-out> <dbase-lsp-extipv6-prefix-len-out> <dbase-lsp-extipv6-metric-out> <dbase-lsp-extipv6-up-down-out> <dbase-lsp-extipv6-ext-origin-out> ] [ TABLE_lsp_subtlv <dbase-lsp-subtlv-name-out> [ <dbase-lsp-extis-admin-group-out> ] [ <dbase-lsp-subtlv-ip-addr-out> ] [ <dbase-lsp-extis-bw-out> ] [ <dbase-lsp-extis-te-metric-out> ] [ <dbase-lsp-extis-pri1-out> ] [ <dbase-lsp-extis-pri1-val-out> ] [ <dbase-lsp-extis-pri2-out> ] [ <dbase-lsp-extis-pri2-val-out> ] [ <dbase-lsp-subtlv-len-out> ] [ <dbase-lsp-subtlv-unknown-out> ] ] ] <dbase-lsp-digest-out> ] ] [ <dbase-lsp-total-out> ] [ <dbase-lsp-empty-out> ] [ <dbase-lsp-zeroseq-out> ] ] ]

- NEW: show fabricpath isis [ <l2mp-isis-tag> ] database [ <level> ] [ mgroup ] [ detail | advertise | summary ] [ <lid> ] { [ zero-sequence ] | [ router-id <rid> ] | [ adjacency <adj-id> ] } [ __readonly__ [ TABLE_process_tag <process-tag-out> [ <dbase-hname-absent-out> ] [ TABLE_lsp_name <dbase-lsp-name-out> <dbase-lsp-status-out> <dbase-lsp-absent-out> [ <dbase-lsp-seqnum-out> <dbase-lsp-cksum-out> <dbase-lsp-lifetime-out> <dbase-att-out> <dbase-partition-out> <dbase-overload-out> <dbase-istype-out> ] [ <dbase-lsp-instance-out> [ TABLE_lsp_tlv <dbase-lsp-tlv-name-out> [ <dbase-lsp-area-addr-out> ] [ <dbase-lsp-is-nbr-name-out> <dbase-lsp-is-nbr-metric-out> <dbase-lsp-is-nbr-ext-metric-out> ] [ <dbase-lsp-es-nbr-name-out> <dbase-lsp-es-nbr-metric-out> <dbase-lsp-es-nbr-ext-metric-out> ] [ <dbase-lsp-auth-type-out> <dbase-lsp-auth-len-out> ] [ <dbase-lsp-ext-is-name-out> <dbase-lsp-ext-is-metric-out> ] [ <dbase-lsp-ip-ri-addr-out> <dbase-lsp-ip-ri-mask-out> <dbase-lsp-ip-ri-metric-out> <dbase-lsp-ip-ri-ext-metric-out> <dbase-lsp-ip-ri-up-down-out> ] [ TABLE_lsp_nlpid <dbase-lsp-prot-support-out> ] [ <dbase-lsp-ip-addr-out> ] [ <dbase-lsp-ipv6-addr-out> ] [ <dbase-lsp-hname-out> <dbase-lsp-hname-len-out> ] [ <dbase-lsp-tlv-unknown-out> <dbase-lsp-tlv-len-out> ] [ <dbase-lsp-extip-addr-out> <dbase-lsp-extip-prefix-len-out> <dbase-lsp-extip-metric-out> <dbase-lsp-extip-up-down-out> ] [ <dbase-lsp-extipv6-addr-out> <dbase-lsp-extipv6-prefix-len-out> <dbase-lsp-extipv6-metric-out> <dbase-lsp-extipv6-up-down-out> <dbase-lsp-extipv6-ext-origin-out> ] [ TABLE_lsp_subtlv <dbase-lsp-subtlv-name-out> [ <dbase-lsp-extis-admin-group-out> ] [ <dbase-lsp-subtlv-ip-addr-out> ] [ <dbase-lsp-extis-bw-out> ] [ <dbase-lsp-extis-te-metric-out> ] [ <dbase-lsp-extis-pri1-out> ] [ <dbase-lsp-extis-pri1-val-out> ] [ <dbase-lsp-extis-pri2-out> ] [ <dbase-lsp-extis-pri2-val-out> ] [ <dbase-lsp-ext-ipv4-pfxsid> <dbase-lsp-ext-ipv4-pfxsid-flag> ] [ <dbase-lsp-ext-ipv6-pfxsid> <dbase-lsp-ext-ipv6-pfxsid-flag> ] [ <dbase-lsp-subtlv-len-out> ] [ <dbase-lsp-subtlv-unknown-out> ] ] ] <dbase-lsp-digest-out> ] ] [ <dbase-lsp-total-out> ] [ <dbase-lsp-empty-out> ] [ <dbase-lsp-zeroseq-out> ] ] ]

- OLD: show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ [ { TABLE_flow_cache <flow-cache-index> [ <flow-type> ] [ <source-ip> ] [ <destination-ip> ] [ <source-mac> ] [ <destination-mac> ] [ <bridge-domain-id> ] [ <ether-type> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <ipv6-flowlabel> ] [ <byte-count> ] [ <packet-count> ] [ <tcp-flags> ] [ <tos> ] [ <if-id> ] [ <flow-start> ] [ <flow-end> ] } ] ]

- NEW: show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ [ { TABLE_flow_cache <flow-cache-index> [ <flow-type> ] [ <source-ip> ] [ <destination-ip> ] [ <source-mac> ] [ <destination-mac> ] [ <bridge-domain-id> ] [ <ether-type> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <ipv6-flowlabel> ] [ <byte-count> ] [ <packet-count> ] [ <tcp-flags> ] [ <tos> ] [ <if-id> ] [ <output-if-id> ] [ <flow-start> ] [ <flow-end> ] } ] ]

- OLD: show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ipv4 ] [ route | rnhdb ] [ recursive ] [ summary | detail | platform | partial | <prefix> [ longer-prefixes ] [ detail | platform ] | <address> [ detail | platform ] |

- NEW: show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ipv4 ] [ route | rnhdb ] [ recursive ] [ summary | [ [ detail | platform | partial | ipsg ] [ max-display-count <display_count> ] ] | [ <prefix> [ longer-prefixes ] [ detail | platform ] | <address> [ detail | platform ] |

- OLD: show forwarding distribution nve overlay-vlan [ __readonly__ <str> ]

- NEW: show forwarding distribution nve overlay-vlan [ __readonly__ TABLE_overlay_vlan_peer_id <Vlan> <SVP> <install> <Origin> <VFP-region> <peercount> <peer_id> + ]

- OLD: show forwarding mpls [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } [ label <label-id> | <prefix> | <v6prefix> ] | table <table_id> [ label <label-id> | <prefix> | <v6prefix> ] | label-space <label-space-id> | label <label-id> | <prefix> | <v6prefix> ] [ stats ] [ module <module> ] [ implicit ] [ platform ] [ __readonly__ [ { TABLE_mpls <label> [ <out-table-id> ] [ <fec> ] [ <out-ip> ] [ <out-intf> ] [ <out-label> ] [ <out-op> ] [ <hh> ] [ <ref-count> ] [ <in-pkts> ] [ <in-bytes> ] [ <out-pkts> ] [ <out-bytes> ] } ] ]

- NEW: show forwarding mpls [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } [ label <label-id> | <prefix> | <v6prefix> ] | table <table_id> [ label <label-id> | <prefix> | <v6prefix> ] | label-space <label-space-id> | label <label-id> | <prefix> | <v6prefix> ] [ stats ] [ module <module> ] [ implicit ] [ platform ] [ __readonly__ [ { TABLE_mpls <label> [ { TABLE_table_id [ <out-table-id> ] [ <fec> ] [ <out-ip> ] [ <out-intf> ] [ <out-label> ] [ <out-op> ] } ] [ <hh> ] [ <ref-count> ] [ <in-pkts> ] [ <in-bytes> ] [ <swap-out-pkts> ] [ <swap-out-bytes> ] [ <tunnel-out-pkts> ] [ <tunnel-out-bytes> ] } ] ]

- OLD: show forwarding mpls summary [ module <module> ] [ __readonly__ [ { TABLE_labels <space> <count> } <total_deagg_labels> <total_deagg_labels> ] ]

- NEW: show forwarding mpls summary [ module <module> ] [ __readonly__ [ { TABLE_labels <space> <count> } <total_deagg_labels> <feature_evpn_status> ] ]

- OLD: show forwarding nve l3 adjacency tunnel <tunnel_id> [ bd <bd_id> | detail | module <num> | table <table_id> ] [ __readonly__ TABLE_nvel3adj <tunnel_id> <bd_id> <table_id> <VNI> <Drop> <Refcount> <Origin> <State> <Del> <sw_index> <hw_index0> <hw_index1> <hw_index2> ]

- NEW: show forwarding nve l3 adjacency tunnel <tunnel_id> [ bd <bd_id> | detail | module <module> | table <table_id> ] [ __readonly__ TABLE_nvel3adj <tunnel_id> <bd_id> <table_id> <VNI> <Drop> <Refcount> <Origin> <State> <Del> <sw_index> <hw_index0> <hw_index1> <hw_index2> ]

- OLD: show forwarding nve l3 peers [ peers <peer_id> | tunnel <tunnel_id> | detail | module <num> ] + [ __readonly__ { TABLE_l3peers <tunnel_id> <peer_id> <peer_address> <interface> <rmac> <origin> <state> <del> <count> } ]

- NEW: show forwarding nve l3 peers [ peers <peer_id> | tunnel <tunnel_id> | detail | module <module> ] + [ __readonly__ { TABLE_l3peers <tunnel_id> <peer_id> <peer_address> <interface> <rmac> <origin> <state> <del> <count> } ]

- OLD: show icam prediction scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } } ] <YYYY> <Month> <Date> <Time> [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] } ] } ] } ] ]

- NEW: show icam prediction scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | total-vlans-x-ports | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } } ] <YYYY> <Month> <Date> <Time> [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] } ] } ] } ] ]

- OLD: show icam scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } } ] [ history <num_intervals> | utilization | thresholds ] [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] [ <Thres_Exceeded> <Polled_TS> ] [ <Avg_Util> ] [ <Week_Util> <Week_TS> ] [ <Peak_Util> <Peak_TS> ] [ <Info_Thres_Exceed> <Info_Thres_Exceed_TS> <Warn_Thres_Exceed> <Warn_Thres_Exceed_TS> <Crit_Thres_Exceed> <Crit_Thres_Exceed_TS> ] } ] } ] } ] ]

- NEW: show icam scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | total-vlans-x-ports | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } } ] [ history <num_intervals> | utilization | thresholds ] [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] [ <Thres_Exceeded> <Polled_TS> ] [ <Avg_Util> ] [ <Week_Util> <Week_TS> ] [ <Peak_Util> <Peak_TS> ] [ <Info_Thres_Exceed> <Info_Thres_Exceed_TS> <Warn_Thres_Exceed> <Warn_Thres_Exceed_TS> <Crit_Thres_Exceed> <Crit_Thres_Exceed_TS> ] } ] } ] } ] ]

- OLD: show inband-telemetry exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> ]

- NEW: show inband-telemetry exporter [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> ]

- OLD: show inband-telemetry flow-profile [ name ] [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <dscp> <age> <latency> ]

- NEW: show inband-telemetry flow-profile [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <dscp> <age> <latency> ]

- OLD: show inband-telemetry monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]

- NEW: show inband-telemetry monitor [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]

- OLD: show inband-telemetry queue-profile [ name ] [ <queue-profilename> ] [ __readonly__ <queue-profile> <description> <depth> <latency> ]

- NEW: show inband-telemetry queue-profile [ <queue-profilename> | queue-profile-default ] [ __readonly__ <queue-profile> <description> <depth> <latency> ]

- OLD: show inband-telemetry record [ name ] [ { <recordname> } ] [ __readonly__ <record> <description> <use_count> ]

- NEW: show inband-telemetry record [ { <recordname> } ] [ __readonly__ <record> <description> <use_count> ]

- OLD: show inband-telemetry watchlist [ name ] [ { <watchlistname> } ] [ __readonly__ <watchlist> <use_count> <description> <num_aces> <ace_seq_num> <ace_action> <ace_type> <ace_sip> <ace_sip_len> <ace_dip> <ace_dip_len> ]

- NEW: show inband-telemetry watchlist [ { <watchlistname> } ] [ __readonly__ <watchlist> <use_count> <description> <num_aces> <ace_seq_num> <ace_action> <ace_type> <ace_sip> <ace_sip_len> <ace_dip> <ace_dip_len> ]

- OLD: show interface counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] ]

- NEW: show interface counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] [ <input_rate_bit_per_sec> ] [ <input_rate_bytes_per_sec> ] [ <input_rate_frames_per_sec> ] [ <output_rate_bit_per_sec> ] [ <output_rate_bytes_per_sec> ] [ <output_rate_frames_per_sec> ] [ <in_frames> ] [ <in_bytes> ] [ <class_2_in_frames> ] [ <class_2_in_bytes> ] [ <class_3_in_frames> ] [ <class_3_in_bytes> ] [ <class_f_in_frames> ] [ <class_f_in_bytes> ] [ <class_2_3_in_frames> ] [ <in_discards> ] [ <in_errors> ] [ <in_crc_fcs> ] [ <in_unknown_class> ] [ <in_too_long> ] [ <in_too_short> ] [ <out_frames> ] [ <out_bytes> ] [ <class_2_out_frames> ] [ <class_2_out_bytes> ] [ <class_3_out_frames> ] [ <class_3_out_bytes> ] [ <class_f_out_frames> ] [ <class_f_out_bytes> ] [ <class_2_3_out_frames> ] [ <out_discards> ] [ <out_errors> ] [ <out_crc_fcs> ] [ <timeout_discards> ] [ <credit_loss> ] [ <input_ols> ] [ <input_lrr> ] [ <input_nos> ] [ <input_loop_inits> ] [ <output_ols> ] [ <output_lrr> ] [ <output_nos> ] [ <output_loop_inits> ] [ <link_faliures> ] [ <sync_loss> ] [ <signal_loss> ] [ <b2b_transmit> ] [ <b2b_receive> ] [ <txwait> ] [ <tx_credit_unavbl> ] [ <b2b_receive_remain> ] [ <b2b_transmit_remain> ] [ <low_priority_b2b_remain> ] [ <off_seq_err_rcvd> ] [ <broadcast_frames> ] [ <errors> ] [ <queue_drops> ] [ <if_down_drops> ] [ <red_drops> ] [ <bad_ether_type_drops> ] [ <bad_protocol_drops> ] [ <arp_drops> ] [ <reass_frames> ] [ <timestamp_error> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <time_last_cleared> ] ]

- OLD: show interface counters snmp [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface> <eth_inpkts> [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface> <eth_outpkts> [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

- NEW: show interface counters snmp [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

- OLD: show ip arp statistics [ <interface> ] [ interface-all ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out1> [ TABLE_stat <tx-total> <tx-req> <tx-reply> <tx-req-l2> <tx-reply-l2> <tx-grat> <tx-tunnel> <tx-drop> [ <tx-srvrport> ] [ <tx-fbrcport> ] [ <tx-fixup-core> ] [ <tx-fixup-server> ] [ <tx-fixup-rarp> ] [ <tx-anycast-glean> ] <tx-mbuf-fail> <tx-ctxt-not-crtd> <tx-bad-ctxt-id> <tx-invalid-ifindex> <tx-invalid-sip> <tx-invalid-dip> <tx-own-ip> <tx-unattached-ip> <tx-adj-create-fail> <tx-null-sip> <tx-null-smac> <tx-client-enq-fail> <tx-dest-unreachable-proxy-arp> <tx-dest-unreachable-enhanced-proxy> <tx-dest-l2port-track> <tx-invalid-local-proxy> <tx-invalid-proxy> <tx-vip-not-active> <rx-total> <rx-req> <rx-reply> <rx-req-l2> <rx-reply-l2> <rx-proxy> <rx-local-proxy> <rx-enhanced-proxy> <rx-enhanced-proxy-anycast> <rx-enhanced-proxy-l2port-track> <rx-tunnel> <rx-fastpath> <rx-snoop> <rx-drop> <rx-srvrport> <bad-if> <bad-len> <invalid-prot> <invalid-hrd-type> <invalid-ctxt> <ctxt-not-crtd> <invalid-l2> <invalid-l3> <invalid-sip> <our-sip> <arp-if-no-mem> <subnet-mismatch> <dir-bcast> <invalid-dip> <non-local-dst> <non-active-fhrp> <invalid-smac> <our-smac> <not-init> <l2-prxy-en> <l2-port-untrusted> <stdby-fhrp-vip> <grat-prxy-en> <arp-req-ignore> <l2-intf> <l2fm-query-fail> <tunnel_fail> [ <hsrp-active-vmac> ] [ <rx-intf-down> ] <recv-glean-count> <refresh-req-from-clients> <l2rib-signals> <adds> <dels> <timeouts> ] ]

- NEW: show ip arp statistics [ <interface> ] [ interface-all ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out1> [ TABLE_stat <tx-total> <tx-req> <tx-reply> <tx-req-l2> <tx-reply-l2> <tx-grat> <tx-tunnel> <tx-drop> [ <tx-srvrport> ] [ <tx-fbrcport> ] [ <tx-fixup-core> ] [ <tx-fixup-server> ] [ <tx-fixup-rarp> ] [ <tx-anycast-glean> ] <tx-mbuf-fail> <tx-ctxt-not-crtd> <tx-bad-ctxt-id> <tx-invalid-ifindex> <tx-invalid-sip> <tx-invalid-dip> <tx-own-ip> <tx-unattached-ip> <tx-adj-create-fail> <tx-null-sip> <tx-null-smac> <tx-client-enq-fail> <tx-dest-unreachable-proxy-arp> <tx-dest-unreachable-enhanced-proxy> <tx-dest-l2port-track> <tx-invalid-local-proxy> <tx-invalid-proxy> <tx-vip-not-active> <tx-skip-refresh-over-core-and-flood-to-server> <rx-total> <rx-req> <rx-reply> <rx-req-l2> <rx-reply-l2> <rx-proxy> <rx-local-proxy> <rx-enhanced-proxy> <rx-enhanced-proxy-anycast> <rx-enhanced-proxy-l2port-track> <rx-tunnel> <rx-fastpath> <rx-snoop> <rx-drop> <rx-srvrport> <bad-if> <bad-len> <invalid-prot> <invalid-hrd-type> <invalid-ctxt> <ctxt-not-crtd> <invalid-l2> <invalid-l3> <invalid-sip> <our-sip> <arp-if-no-mem> <subnet-mismatch> <dir-bcast> <invalid-dip> <non-local-dst> <non-active-fhrp> <invalid-smac> <our-smac> <not-init> <l2-prxy-en> <l2-port-untrusted> <stdby-fhrp-vip> <grat-prxy-en> <arp-req-ignore> <l2-intf> <l2fm-query-fail> <tunnel_fail> [ <hsrp-active-vmac> ] [ <rx-intf-down> ] <recv-glean-count> <refresh-req-from-clients> <l2rib-signals> <adds> <dels> <timeouts> ] ]

- OLD: show ip community-list [ <cl_name> ] [ __readonly__ TABLE_cl <name> <action> <rule> ]

- NEW: show ip community-list [ <cl_name> ] [ __readonly__ TABLE_cl <name> <seq> <action> <rule> ]

- OLD: show ip igmp snooping mac-oif [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ __readonly__ [ <totaloif> ] [ TABLE_vlan <vlan-id> <count> [ TABLE_mac <mac-addr> [ TABLE_oif <oifs> ] ] ] ]

- NEW: show ip igmp snooping mac-oif [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ __readonly__ [ <totaloif> ] [ TABLE_vlan [ <vlan-id> ] [ <count> ] [ TABLE_mac [ <mac-addr> ] [ TABLE_oif [ <oifs> ] ] ] ] ]

- OLD: show ip nat-alias

- NEW: show ip nat-alias [ __readonly__ [ TABLE_nat_alias_vrf [ { <nat-alias-vrf-name> [ TABLE_each_vrf_alias { <nat-alias-addr> <nat-alias-intr> } ] } ] ] ]

- OLD: show ip ospf [ <tag> ] traffic [ <interface> [ detail ] | [ detail ] | [ detail ] vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_traf <ptag> <cname> <last_clear> [ <ifname> ] <pkt_in> <pkt_out> <lsu_first_trans> <lsu_retrans> <lsu_for_lsreq> <lsu_nbr_trans> <throttle_out> <throttle_out_token> <throttle_out_ip> <lsa_ignored> <lsa_dropped_spf> <lsa_dropped_gr> <pkt_drops_in> <pkt_drops_out> <pkt_errors_in> <pkt_errors_out> <hello_errors_in> <dbds_errors_in> <lsreqs_errors_in> <lsus_errors_in> <lsacks_errors_in> <pkt_unknown_in> <pkt_unknown_out> <pkt_no_ospf_intf> <bad_version> <bad_crc> <dup_rtr_id> <dup_src_addr> <invalid_src_addr> <invalid_dst_addr> <non_existing_nbr> <pkt_passive_intf> <wrong_area> <invalid_pkt_len> <nbr_changed_routerid_ipaddr> <nbr_changed_interfaceid> [ <bad_auth> ] [ <bad_reserved> ] [ <pkt_no_vrf> ] <hellos_in> <dbds_in> <lsreqs_in> <lsus_in> <lsacks_in> <hellos_out> <dbds_out> <lsreqs_out> <lsus_out> <lsacks_out> [ <hellos_in_hq> <dbds_in_hq> <lsreqs_in_flq> <lsus_in_flq> <lsacks_in_flq> <lsas_in_dbds_in> <lsas_in_lsreqs_in> <lsas_in_lsus_in> <lsas_in_lsacks_in> <lsas_in_dbds_out> <lsas_in_lsreqs_out> <lsas_in_lsus_out> <lsas_in_lsacks_out> <lsas_in_rxmt_lsus_out> ] ]

- NEW: show ip ospf [ <tag> ] traffic [ <interface> [ detail ] | [ detail ] | [ detail ] vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_traf <ptag> <cname> <last_clear> [ <ifname> ] <pkt_in> <pkt_out> <lsu_first_trans> <lsu_retrans> <lsu_for_lsreq> <lsu_nbr_trans> <throttle_out> <throttle_out_token> <throttle_out_ip> <lsa_ignored> <lsa_dropped_spf> <lsa_dropped_gr> <pkt_drops_in> <pkt_drops_out> <pkt_errors_in> <pkt_errors_out> <hello_errors_in> <dbds_errors_in> <lsreqs_errors_in> <lsus_errors_in> <lsacks_errors_in> <pkt_unknown_in> <pkt_unknown_out> <pkt_no_ospf_intf> <bad_version> <bad_crc> <dup_rtr_id> <dup_src_addr> <invalid_src_addr> <invalid_dst_addr> <non_existing_nbr> <pkt_passive_intf> <wrong_area> <invalid_pkt_len> <nbr_changed_routerid_ipaddr> <nbr_changed_interfaceid> <bad_auth> <pkt_no_vrf> [ <bad_reserved> ] <hellos_in> <dbds_in> <lsreqs_in> <lsus_in> <lsacks_in> <hellos_out> <dbds_out> <lsreqs_out> <lsus_out> <lsacks_out> [ <hellos_in_hq> <dbds_in_hq> <lsreqs_in_flq> <lsus_in_flq> <lsacks_in_flq> <lsas_in_dbds_in> <lsas_in_lsreqs_in> <lsas_in_lsus_in> <lsas_in_lsacks_in> <lsas_in_dbds_out> <lsas_in_lsreqs_out> <lsas_in_lsus_out> <lsas_in_lsacks_out> <lsas_in_rxmt_lsus_out> ] ]

- OLD: show ip pim oif-list <group> [ <source> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> { TABLE_grp <mcast-addrs> <incoming-intf> <rpf-nbr> <timeout-interval> <oif-list-count> [ { TABLE_oiflist <oif-name> } ] <timeout-list-count> [ { TABLE_timeoutlist <timeoutoif-name> } ] <immediate-list-count> [ { TABLE_immediatelist <immediateoif-name> } ] <immediate-timeout-list-count> [ { TABLE_immediatetimeoutlist <immediatetimeoutoif-name> } ] <sgr-prune-list-count> [ { TABLE_sgrprunelist <sgrprunelistoif-name> } ] } ]

- NEW: show ip pim oif-list <group> [ <source> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> [ { TABLE_grp [ <mcast-addrs> ] [ <incoming-intf> ] [ <rpf-nbr> ] [ <timeout-interval> ] [ <oif-list-count> ] [ { TABLE_oiflist <oif-name> } ] [ <timeout-list-count> ] [ { TABLE_timeoutlist <timeoutoif-name> } ] [ <immediate-list-count> ] [ { TABLE_immediatelist <immediateoif-name> } ] [ <immediate-timeout-list-count> ] [ { TABLE_immediatetimeoutlist <immediatetimeoutoif-name> } ] [ <sgr-prune-list-count> ] [ { TABLE_sgrprunelist <sgrprunelistoif-name> } ] } ] ]

- OLD: show ip route [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ip-addr> | { <ip-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <protocol> [ all ] } | { bind-label <bind-lbl> | next-hop <next-hop> | next-hop-v6 <next-hop-v6> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | detail ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ipnexthop> ] [ <ifname> ] [ <bindlbl> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] [ <ubest> ] [ <mbest> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientnameuni> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientnamemulti> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

- NEW: show ip route [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ip-addr> | { <ip-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <protocol> [ all ] } | { bind-label <bind-lbl> | next-hop <next-hop> | next-hop-v6 <next-hop-v6> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | detail ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ipnexthop> ] [ <ifname> ] [ <bindlbl> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] [ <bgpbackuppath> ] [ <ubest> ] [ <mbest> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientnameuni> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientnamemulti> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

- OLD: show ipv6 dhcp relay statistics [ interface <intf> [ [ server-ip <ip-addr-val> [ use-vrf <vrf-name> ] [ interface <dest-interface> ] ] | [ server-ip <ip-addr-val> [ interface <dest-interface> ] [ use-vrf <vrf-name> ] ] ] ] [ __readonly__ [ <msg_stats_hdr> <msg_type_str> <rx_pkts> <tx_pkts> <drops> <msg_type_str_advertise> <rx_pkts_advertise> <tx_pkts_advertise> <drops_advertise> <msg_type_str_request> <rx_pkts_request> <tx_pkts_request> <drops_request> <msg_type_str_confirm> <rx_pkts_confirm> <tx_pkts_confirm> <drops_confirm> <msg_type_str_renew> <rx_pkts_renew> <tx_pkts_renew> <drops_renew> <msg_type_str_rebind> <rx_pkts_rebind> <tx_pkts_rebind> <drops_rebind> <msg_type_str_reply> <rx_pkts_reply> <tx_pkts_reply> <drops_reply> <msg_type_str_release> <rx_pkts_release> <tx_pkts_release> <drops_release> <msg_type_str_decline> <rx_pkts_decline> <tx_pkts_decline> <drops_decline> <msg_type_str_reconfigure> <rx_pkts_reconfigure> <tx_pkts_reconfigure> <drops_reconfigure> <msg_type_str_inforeq> <rx_pkts_inforeq> <tx_pkts_inforeq> <drops_inforeq> <msg_type_str_relay_fwd> <rx_pkts_relay_fwd> <tx_pkts_relay_fwd> <drops_relay_fwd> <msg_type_str_relay_reply> <rx_pkts_relay_reply> <tx_pkts_relay_reply> <drops_relay_reply> <msg_type_str_unknown> <rx_pkts_unknown> <tx_pkts_unknown> <drops_unknown> <msg_type_str_total> ] [ <server_stats_hdr> [ TABLE_server <server_helper_addr> <server_vrf> <server_intf> <server_requests> <server_responses> ] ] [ <drop_hdr> <drop_relay_disable> <drop_max_hops> <drop_validation_fails> <drop_unknown_op_intf> <drop_bad_context> <drop_opt_insert_fail> <drop_server_direct_reply> <drop_no_ipv6_addr> <drop_intf_error> <drop_vpn_disabled> <drop_ipv6_extn_hdrs_presence> <drop_mct_drop> ] ]

- NEW: show ipv6 dhcp relay statistics [ interface <intf> [ [ server-ip <ip-addr-val> [ use-vrf <vrf-name> ] [ interface <dest-interface> ] ] | [ server-ip <ip-addr-val> [ interface <dest-interface> ] [ use-vrf <vrf-name> ] ] ] ] [ __readonly__ [ <msg_stats_hdr> <msg_type_str> <rx_pkts> <tx_pkts> <drops> <msg_type_str_advertise> <rx_pkts_advertise> <tx_pkts_advertise> <drops_advertise> <msg_type_str_request> <rx_pkts_request> <tx_pkts_request> <drops_request> <msg_type_str_confirm> <rx_pkts_confirm> <tx_pkts_confirm> <drops_confirm> <msg_type_str_renew> <rx_pkts_renew> <tx_pkts_renew> <drops_renew> <msg_type_str_rebind> <rx_pkts_rebind> <tx_pkts_rebind> <drops_rebind> <msg_type_str_reply> <rx_pkts_reply> <tx_pkts_reply> <drops_reply> <msg_type_str_release> <rx_pkts_release> <tx_pkts_release> <drops_release> <msg_type_str_decline> <rx_pkts_decline> <tx_pkts_decline> <drops_decline> <msg_type_str_reconfigure> <rx_pkts_reconfigure> <tx_pkts_reconfigure> <drops_reconfigure> <msg_type_str_inforeq> <rx_pkts_inforeq> <tx_pkts_inforeq> <drops_inforeq> <msg_type_str_relay_fwd> <rx_pkts_relay_fwd> <tx_pkts_relay_fwd> <drops_relay_fwd> <msg_type_str_relay_reply> <rx_pkts_relay_reply> <tx_pkts_relay_reply> <drops_relay_reply> <msg_type_str_unknown> <rx_pkts_unknown> <tx_pkts_unknown> <drops_unknown> <msg_type_str_total> <rx_pkts_total> <tx_pkts_total> <drops_total> ] [ <server_stats_hdr> [ TABLE_server <server_helper_addr> <server_vrf> <server_intf> <server_requests> <server_responses> ] ] [ <drop_hdr> <drop_relay_disable> <drop_max_hops> <drop_validation_fails> <drop_unknown_op_intf> <drop_bad_context> <drop_opt_insert_fail> <drop_server_direct_reply> <drop_no_ipv6_addr> <drop_intf_error> <drop_vpn_disabled> <drop_ipv6_extn_hdrs_presence> <drop_mct_drop> ] ]

- OLD: show ipv6 pim rp [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-context> ] [ <is-bsr-enabled> ] [ <is-bsr-listen-only> ] [ <is-bsr-forward-only> ] [ <are-we-bsr> ] [ <bsr-address> ] [ <is-bsr-address> ] [ <bsr-priority> ] [ <bsr-hash-masklen> ] [ <bs-timer> ] [ <bsr-uptime> ] [ <bsr-expires> ] [ <is-autorp-enabled> ] [ <is-autorp-listen-only> ] [ <is-autorp-forward-only> ] [ <are-we-autorp> ] [ <autorp-address> ] [ <is-autorp-address> ] [ <autorp-dis-timer> ] [ <autorp-up-time> ] [ <autorp-expire-time> ] [ <rp-cand-policy-name> ] [ <bsr-policy-name> ] [ <rp-announce-policy-name> ] [ <rp-discovery-policy-name> ] [ { TABLE_anycast_rp [ <anycast-rp-addr> ] [ { TABLE_arp_rp [ <arp-rp-addr> ] [ <is-rpaddr-local> ] } ] } ] [ { TABLE_rp [ <rp-addr> ] [ <is-rp-in-cib> ] [ <df-ordinal> ] [ <rp-uptime> ] [ <rp-priority> ] [ <autorp-expires> ] [ <bsr-rp-expires> ] [ <autorp-info-src> ] [ <bsr-info-src> ] [ <is-rp-static> ] [ <static-rp-group-map> ] [ { TABLE_grange [ <grange-grp> ] [ <grange-masklen> ] [ <is-bidir-grp> ] [ <is-autorp-rp-owner> ] [ <is-bsr-rp-owner> ] [ <is-static-rp-owner> ] } ] } ] ]

- NEW: show ipv6 pim rp [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <out-context> ] [ <is-bsr-enabled> ] [ <is-bsr-listen-only> ] [ <is-bsr-forward-only> ] [ <are-we-bsr> ] [ <bsr-address> ] [ <is-bsr-address> ] [ <bsr-priority> ] [ <bsr-hash-masklen> ] [ <bs-timer> ] [ <bsr-uptime> ] [ <bsr-expires> ] [ <rp-cand-policy-name> ] [ <bsr-policy-name> ] [ <rp-announce-policy-name> ] [ <rp-discovery-policy-name> ] [ { TABLE_anycast_rp [ <anycast-rp-addr> ] [ { TABLE_arp_rp [ <arp-rp-addr> ] [ <is-rpaddr-local> ] } ] } ] [ { TABLE_rp [ <rp-addr> ] [ <is-rp-in-cib> ] [ <df-ordinal> ] [ <rp-uptime> ] [ <rp-priority> ] [ <bsr-rp-expires> ] [ <bsr-info-src> ] [ <is-rp-static> ] [ <static-rp-group-map> ] [ { TABLE_grange [ <grange-grp> ] [ <grange-masklen> ] [ <is-bidir-grp> ] [ <is-bsr-rp-owner> ] [ <is-static-rp-owner> ] } ] } ] ]

- OLD: show ipv6 pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <uptime> ] [ <reg-sent> ] [ <reg-rcvd> ] [ <null-reg-sent> ] [ <null-reg-rcvd> ] [ <reg-stop-sent> ] [ <reg-stop-rcvd> ] [ <reg-rcvd-not-rp> ] [ <reg-rcvd-for-ssm> ] [ <reg-rcvd-for-bidir> ] [ <bootstrap-sent> ] [ <bootstrap-rcvd> ] [ <cand-rp-sent> ] [ <cand-rp-rcvd> ] [ <bs-no-nbr> ] [ <bs-border-deny> ] [ <bs-len-errors> ] [ <bs-rpf-failed> ] [ <bs-no-listen> ] [ <candrp-border-deny> ] [ <candrp-no-listen> ] [ <autorp-announce-sent> ] [ <autorp-announce-rcvd> ] [ <autorp-discovery-sent> ] [ <autorp-discovery-rcvd> ] [ <autorp-rpf-failed> ] [ <autorp-border-deny> ] [ <autorp-invalid-type> ] [ <autorp-ttl-expired> ] [ <autorp-no-listen> ] [ <ctrl-no-route> ] [ <data-no-route> ] [ <no-state> ] [ <create-state> ] ]

- NEW: show ipv6 pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <uptime> ] [ <reg-sent> ] [ <reg-rcvd> ] [ <null-reg-sent> ] [ <null-reg-rcvd> ] [ <reg-stop-sent> ] [ <reg-stop-rcvd> ] [ <reg-rcvd-not-rp> ] [ <reg-rcvd-for-ssm> ] [ <reg-rcvd-for-bidir> ] [ <bootstrap-sent> ] [ <bootstrap-rcvd> ] [ <cand-rp-sent> ] [ <cand-rp-rcvd> ] [ <bs-no-nbr> ] [ <bs-border-deny> ] [ <bs-len-errors> ] [ <bs-rpf-failed> ] [ <bs-no-listen> ] [ <candrp-border-deny> ] [ <candrp-no-listen> ] [ <ctrl-no-route> ] [ <data-no-route> ] [ <no-state> ] [ <create-state> ] ]

- OLD: show itd <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> <peer_status> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ <ace_name> ] [ <ace_seq> ] [ <ace_ip> ] [ <ace_protocol> ] [ <ace_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

- NEW: show itd <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> [ <probe> ] <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] [ <vrf_name> ] [ <excludeACL> ] [ <userACL> ] [ <peer_status> ] [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ <ace_name> ] [ <ace_seq> ] [ <ace_ip> ] [ <ace_protocol> ] [ <ace_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

- OLD: show itd [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> <peer_status> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

- NEW: show itd [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> [ <probe> ] <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] [ <vrf_name> ] [ <excludeACL> ] [ <userACL> ] [ <peer_status> ] [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

- OLD: show l2route evpn mac-ip all [ detail ] [ __readonly__ TABLE_l2route_mac_ip_all <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

- NEW: show l2route evpn mac-ip all [ detail ] [ __readonly__ TABLE_l2route_mac_ip_all <topo-id> <mac-addr> <host-ip> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

- OLD: show mac address-table multicast [ vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ [ TABLE_vlan <vlan-id> [ TABLE_mac <mac-addr> <type> [ TABLE_oif <oifs> ] ] ] ]

- NEW: show mac address-table multicast [ vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ [ TABLE_mac [ <vlan-id> ] [ <mac-addr> ] [ <type> ] [ <age> ] [ TABLE_oif [ <oifs> ] ] ] ]

- OLD: show macsec mka [ summary ] [ __readonly__ { TABLE_mka_summary <ifname> <status> <cipher> <keyserver> <policy> <keychain> <fallback_keychain> } ]

- NEW: show macsec mka [ summary ] [ __readonly__ [ <macsec_status> ] [ TABLE_mka_summary <ifname> <status> <cipher> <keyserver> <policy> <keychain> <fallback_keychain> ] ]

- OLD: show macsec mka session [ interface <ifname> ] [ details ] [ __readonly__ [ TABLE_mka_session <ifname> <sci> <peers> <status> <keyserver><ca_auth_mode> ] [ <sessions> <active_sessions> <pending_sessions> ] [ TABLE_mka_session_details <ifname> <status> <sci> <ssci> <port_id> <ckn> <ca_auth_mode> <mi> <mn> <policy> <ks_prio> <keyserver> <cipher> <cipher_operational> <window> <conf_offset> <conf_offset_operational> <sak_status> <sak_an> <sak_ki> <sak_kn> <last_sak_rekey_time> <peer_count> [ TABLE_mka_peer_status <peer_mi> <rxsci> <icv_status> <last_rx_time> ] [ TABLE_mka_fallback <fallback_ckn> <fallback_mi> <fallback_mn> [ TABLE_mka_fallback_peer <fallback_peer_mi> <fallback_rxsci> <fallback_icv_status> <fallback_last_rx_time> ] ] ] ]

- NEW: show macsec mka session [ interface <ifname> ] [ details ] [ __readonly__ [ <macsec_status> ] [ TABLE_mka_session <ifname> <sci> <peers> <status> <keyserver><ca_auth_mode> ] [ <sessions> <active_sessions> <pending_sessions> ] [ TABLE_mka_session_details <ifname> <status> <sci> <ssci> <port_id> <ckn> <ca_auth_mode> <mi> <mn> <policy> <ks_prio> <keyserver> <include_icv_indicator> <cipher> <cipher_operational> <window> <conf_offset> <conf_offset_operational> <sak_status> <sak_an> <sak_ki> <sak_kn> <last_sak_rekey_time> <peer_count> <mac_addr> <ether_type> [ TABLE_mka_peer_status <peer_mi> <rxsci> <icv_status> <last_rx_time> ] [ TABLE_mka_fallback <fallback_ckn> <fallback_mi> <fallback_mn> [ TABLE_mka_fallback_peer <fallback_peer_mi> <fallback_rxsci> <fallback_icv_status> <fallback_last_rx_time> ] ] ] ]

- OLD: show macsec mka statistics [ interface <ifname> ] [ __readonly__ [ TABLE_mka_intf_stats [ [ <ifname2> ] [ TABLE_ca_stats [ [ <ca_stat_ckn> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] ] ] [ TABLE_idb_stats [ [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <idb_stat_mkpdu_tx_success> ] [ <idb_stat_mkpdu_tx_fail> ] [ <idb_stat_mkpdu_tx_pkt_build_fail> ] [ <idb_stat_mkpdu_no_tx_on_intf_down> ] [ <idb_stat_mkpdu_no_rx_on_intf_down> ] [ <idb_stat_mkpdu_rx_ca_notfound> ] [ <idb_stat_mkpdu_rx_error> ] [ <idb_stat_mkpdu_rx_success> ] [ <idb_stat_mkpdu_failure_rx_integrity_check_error> ] [ <idb_stat_mkpdu_failure_invalid_peer_mn_error> ] [ <idb_stat_mkpdu_failure_nonrecent_peerlist_mn_error> ] [ <idb_stat_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_rx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <idb_stat_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_eapol_ethertype_mismatch_error> ] [ <idb_stat_sak_failure_sak_generate_error> ] [ <idb_stat_sak_failure_hash_generate_error> ] [ <idb_stat_sak_failure_sak_encryption_error> ] [ <idb_stat_sak_failure_sak_decryption_error> ] [ <idb_stat_sak_failure_ick_derivation_error> ] [ <idb_stat_sak_failure_kek_derivation_error> ] [ <idb_stat_sak_failure_invalid_macsec_capability_error> ] [ <idb_stat_macsec_failure_rx_sa_create_error> ] [ <idb_stat_macsec_failure_tx_sa_create_error> ] ] ] ] [ TABLE_mka_gbl_stats [ [ <session_secured> ] [ <session_deleted> ] [ <session_keepalive_timeout> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mka_error_session_failure_bring_up_error> ] [ <mka_error_sak_failure_sak_generate_error> ] [ <mka_error_sak_failure_hash_generate_error> ] [ <mka_error_sak_failure_sak_encryption_error> ] [ <mka_error_sak_failure_sak_decryption_error> ] [ <mka_error_sak_failure_sak_cipher_mismatch_error> ] [ <mka_error_ca_failure_ick_derivation_error> ] [ <mka_error_ca_failure_kek_derivation_error> ] [ <mka_error_ca_failure_invalid_macsec_capability_error> ] [ <mka_error_macsec_failure_rx_sa_create_error> ] [ <mka_error_macsec_failure_tx_sa_create_error> ] [ <mka_error_mkpdu_failure_mkpdu_tx_error> ] [ <mka_error_mkpdu_failure_mkpdu_rx_integrity_check_error> ] [ <mka_error_mkpdu_failure_mkpdu_invalid_peer_mn_error> ] [ <mka_error_mkpdu_failure_mkpdu_nonrecent_peerlist_mn_error> ] [ <mka_error_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_rx_not_set_error> ] [ <mka_error_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <mka_error_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <global_stats_mkpdu_rx_invalid_ckn> ] [ <global_stats_mkpdu_tx_pkt_build_fail> ] ] ] ] ]

- NEW: show macsec mka statistics [ interface <ifname> ] [ __readonly__ [ <macsec_status> ] [ TABLE_mka_intf_stats [ [ <ifname2> ] [ TABLE_ca_stats [ [ <ca_stat_ckn> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] ] ] [ TABLE_idb_stats [ [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <idb_stat_mkpdu_tx_success> ] [ <idb_stat_mkpdu_tx_fail> ] [ <idb_stat_mkpdu_tx_pkt_build_fail> ] [ <idb_stat_mkpdu_no_tx_on_intf_down> ] [ <idb_stat_mkpdu_no_rx_on_intf_down> ] [ <idb_stat_mkpdu_rx_ca_notfound> ] [ <idb_stat_mkpdu_rx_error> ] [ <idb_stat_mkpdu_rx_success> ] [ <idb_stat_mkpdu_failure_rx_integrity_check_error> ] [ <idb_stat_mkpdu_failure_invalid_peer_mn_error> ] [ <idb_stat_mkpdu_failure_nonrecent_peerlist_mn_error> ] [ <idb_stat_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_rx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <idb_stat_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_eapol_ethertype_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_eapol_destmac_mismatch_error> ] [ <idb_stat_sak_failure_sak_generate_error> ] [ <idb_stat_sak_failure_hash_generate_error> ] [ <idb_stat_sak_failure_sak_encryption_error> ] [ <idb_stat_sak_failure_sak_decryption_error> ] [ <idb_stat_sak_failure_ick_derivation_error> ] [ <idb_stat_sak_failure_kek_derivation_error> ] [ <idb_stat_sak_failure_invalid_macsec_capability_error> ] [ <idb_stat_macsec_failure_rx_sa_create_error> ] [ <idb_stat_macsec_failure_tx_sa_create_error> ] ] ] ] [ TABLE_mka_gbl_stats [ [ <session_secured> ] [ <session_deleted> ] [ <session_keepalive_timeout> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mka_error_session_failure_bring_up_error> ] [ <mka_error_sak_failure_sak_generate_error> ] [ <mka_error_sak_failure_hash_generate_error> ] [ <mka_error_sak_failure_sak_encryption_error> ] [ <mka_error_sak_failure_sak_decryption_error> ] [ <mka_error_sak_failure_sak_cipher_mismatch_error> ] [ <mka_error_ca_failure_ick_derivation_error> ] [ <mka_error_ca_failure_kek_derivation_error> ] [ <mka_error_ca_failure_invalid_macsec_capability_error> ] [ <mka_error_macsec_failure_rx_sa_create_error> ] [ <mka_error_macsec_failure_tx_sa_create_error> ] [ <mka_error_mkpdu_failure_mkpdu_tx_error> ] [ <mka_error_mkpdu_failure_mkpdu_rx_integrity_check_error> ] [ <mka_error_mkpdu_failure_mkpdu_invalid_peer_mn_error> ] [ <mka_error_mkpdu_failure_mkpdu_nonrecent_peerlist_mn_error> ] [ <mka_error_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_rx_not_set_error> ] [ <mka_error_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <mka_error_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <global_stats_mkpdu_rx_invalid_ckn> ] [ <global_stats_mkpdu_tx_pkt_build_fail> ] ] ] ] ]

- OLD: show macsec policy [ <policy_name> ] [ __readonly__ { TABLE_macsec_policy <name> <cipher_suite> <keyserver_priority> <window_size> <conf_offset> <security_policy> <sak-expiry-time> } ]

- NEW: show macsec policy [ <policy_name> ] [ __readonly__ { TABLE_macsec_policy <name> <cipher_suite> <keyserver_priority> <window_size> <conf_offset> <security_policy> <sak-expiry-time> <include_icv_indicator> } ]

- OLD: show macsec secy statistics [ interface <ifname> ] [ __readonly__ TABLE_statistics <ifname2> [ <in_pkts_unicast_uncontrolled> ] [ <in_pkts_multicast_uncontrolled> ] [ <in_pkts_broadcast_uncontrolled> ] [ <in_rx_drop_pkts_uncontrolled> ] [ <in_rx_err_pkts_uncontrolled> ] [ <in_pkts_unicast_controlled> ] [ <in_pkts_multicast_controlled> ] [ <in_pkts_broadcast_controlled> ] [ <in_rx_drop_pkts_controlled> ] [ <in_rx_err_pkts_controlled> ] [ <in_octets_uncontrolled> ] [ <in_octets_controlled> ] [ <input_rate_uncontrolled_pps> ] [ <input_rate_uncontrolled_bps> ] [ <input_rate_controlled_pps> ] [ <input_rate_controlled_bps> ] [ <out_pkts_unicast_uncontrolled> ] [ <out_pkts_multicast_uncontrolled> ] [ <out_pkts_broadcast_uncontrolled> ] [ <out_rx_drop_pkts_uncontrolled> ] [ <out_rx_err_pkts_uncontrolled> ] [ <out_pkts_unicast_controlled> ] [ <out_pkts_multicast_controlled> ] [ <out_pkts_broadcast_controlled> ] [ <out_rx_drop_pkts_controlled> ] [ <out_rx_err_pkts_controlled> ] [ <out_octets_uncontrolled> ] [ <out_octets_controlled> ] [ <out_octets_common> ] [ <output_rate_uncontrolled_pps> ] [ <output_rate_uncontrolled_bps> ] [ <output_rate_controlled_pps> ] [ <output_rate_controlled_bps> ] [ <in_pkts_transform_error> ] [ <in_pkts_control> ] [ <in_pkts_untagged> ] [ <in_pkts_no_tag> ] [ <in_pkts_badtag> ] [ <in_pkts_no_sci> ] [ <in_pkts_unknown_sci> ] [ <in_pkts_tagged_ctrl> ] [ <out_pkts_transform_error> ] [ <out_pkts_control> ] [ <out_pkts_untagged> ] [ TABLE_rx_sa_an <rx_sa_an> [ <in_pkts_unchecked> ] [ <in_pkts_delayed> ] [ <in_pkts_late> ] [ <in_pkts_ok> ] [ <in_pkts_invalid> ] [ <in_pkts_not_valid> ] [ <in_pkts_not_using_sa> ] [ <in_pkts_unused_sa> ] [ <in_octets_decrypted> ] [ <in_octets_validated> ] ] [ TABLE_tx_sa_an <tx_sa_an> [ <out_pkts_encrypted_protected> ] [ <out_pkts_too_long> ] [ <out_pkts_sa_not_inuse> ] [ <out_octets_encrypted_protected> ] ] ]

- NEW: show macsec secy statistics [ interface <ifname> ] [ __readonly__ [ <macsec_status> ] [ TABLE_statistics <ifname2> [ <in_pkts_unicast_uncontrolled> ] [ <in_pkts_multicast_uncontrolled> ] [ <in_pkts_broadcast_uncontrolled> ] [ <in_rx_drop_pkts_uncontrolled> ] [ <in_rx_err_pkts_uncontrolled> ] [ <in_pkts_unicast_controlled> ] [ <in_pkts_multicast_controlled> ] [ <in_pkts_broadcast_controlled> ] [ <in_pkts_controlled> ] [ <in_rx_drop_pkts_controlled> ] [ <in_rx_err_pkts_controlled> ] [ <in_octets_uncontrolled> ] [ <in_octets_controlled> ] [ <input_rate_uncontrolled_pps> ] [ <input_rate_uncontrolled_bps> ] [ <input_rate_controlled_pps> ] [ <input_rate_controlled_bps> ] [ <out_pkts_unicast_uncontrolled> ] [ <out_pkts_multicast_uncontrolled> ] [ <out_pkts_broadcast_uncontrolled> ] [ <out_rx_drop_pkts_uncontrolled> ] [ <out_rx_err_pkts_uncontrolled> ] [ <out_pkts_unicast_controlled> ] [ <out_pkts_multicast_controlled> ] [ <out_pkts_broadcast_controlled> ] [ <out_pkts_controlled> ] [ <out_rx_drop_pkts_controlled> ] [ <out_rx_err_pkts_controlled> ] [ <out_octets_uncontrolled> ] [ <out_octets_controlled> ] [ <out_octets_common> ] [ <output_rate_uncontrolled_pps> ] [ <output_rate_uncontrolled_bps> ] [ <output_rate_controlled_pps> ] [ <output_rate_controlled_bps> ] [ <in_pkts_transform_error> ] [ <in_pkts_control> ] [ <in_pkts_untagged> ] [ <in_pkts_no_tag> ] [ <in_pkts_badtag> ] [ <in_pkts_no_sci> ] [ <in_pkts_unknown_sci> ] [ <in_pkts_tagged_ctrl> ] [ <out_pkts_transform_error> ] [ <out_pkts_control> ] [ <out_pkts_untagged> ] [ TABLE_rx_sa_an <rx_sa_an> [ <in_pkts_unchecked> ] [ <in_pkts_delayed> ] [ <in_pkts_late> ] [ <in_pkts_ok> ] [ <in_pkts_invalid> ] [ <in_pkts_not_valid> ] [ <in_pkts_not_using_sa> ] [ <in_pkts_unused_sa> ] [ <in_octets_decrypted> ] [ <in_octets_validated> ] ] [ TABLE_tx_sa_an <tx_sa_an> [ <out_pkts_encrypted_protected> ] [ <out_pkts_too_long> ] [ <out_pkts_sa_not_inuse> ] [ <out_octets_encrypted_protected> ] ] ] ]

- OLD: show ngoam loopback { { statistics { session { <handle> | all } | summary } } | { status { session { <handle> | all } } } } [ __readonly__ [ TABLE_statistics { <sender-handle> <connect-check-id> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_status { <st-sender-handle> <type> <state> } + ] [ TABLE_statistics_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <req-sw-fwd> <req-drop> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> <resp-sw-fwd> <resp-drop> } ] ]

- NEW: show ngoam loopback { { statistics { session { <handle> | all } | summary } } | { status { session { <handle> | all } } } } [ __readonly__ [ TABLE_statistics { <sender-handle> <connect-check-id> <last-clear-stats> TABLE_stats_attr { <stat-attr> <stat-value> } } ] [ TABLE_status { <st-sender-handle> <type> <state> } ] [ TABLE_statistics_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <req-sw-fwd> <req-drop> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> <resp-sw-fwd> <resp-drop> } ] ]

- OLD: show ngoam pathtrace { { statistics { summary | { session { <handle> | all } } } } | { database session { <handle> | all } [ detail ] } } [ __readonly__ [ TABLE_stats { <sender-handle> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <req-sw-fwd> <req-drop> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> <resp-sw-fwd> <resp-drop> } ] [ TABLE_database { <db-sender-handle> <db-start-time> <db-end-time> <db-last-clear-stats> <db-tx> <db-rx> <db-timeout> <db-unsent> <db-req-sw-fwd> <db-req-drop> <db-resp-tx> <db-resp-rx> <db-resp-unsent> <db-resp-dup> <db-resp-sw-fwd> <db-resp-drop> { <seq-number> <cli-status> [ <reply-ip> ] [ <reply-ipv6> ] [ <ingress-if> ] [ <ingress-if-state> ] [ <egress-if> ] [ <egress-if-state> ] [ <end-row> ] + } + } + ] [ TABLE_ifstats { <if-name> <rx-len> <rx-bytes> <rx-pkt-rate> <rx-byte-rate> <rx-load> <rx-ucast> <rx-mcast> <rx-bcast> <rx-errors> <rx-discards> <rx-unknown> <rx-bandwidth> <tx-len> <tx-bytes> <tx-pkt-rate> <tx-byte-rate> <tx-load> <tx-ucast> <tx-mcast> <tx-bcast> <tx-discards> <tx-errors> <tx-bandwidth> } ] ]

- NEW: show ngoam pathtrace { { statistics { summary | { session { <handle> | all } } } } | { database session { <handle> | all } [ detail ] } } [ __readonly__ [ { TABLE_stats <sender-handle> <last-clear-stats> [ TABLE_stats_fields { <stat-attr> <stat-value> } ] } ] [ { TABLE_summary <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <req-sw-fwd> <req-drop> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> <resp-sw-fwd> <resp-drop> } ] [ { TABLE_database <db-sender-handle> <db-start-time> <db-end-time> <db-last-clear-stats> <db-tx> <db-rx> <db-timeout> <db-unsent> <db-req-sw-fwd> <db-req-drop> <db-resp-tx> <db-resp-rx> <db-resp-unsent> <db-resp-dup> <db-resp-sw-fwd> <db-resp-drop> { TABLE_db_reply <seq-number> <cli-status> [ <reply-ip> ] [ <reply-ipv6> ] [ <ingress-if> ] [ <ingress-if-state> ] [ <egress-if> ] [ <egress-if-state> ] [ { TABLE_ifstats <if-name> <rx-len> <rx-bytes> <rx-pkt-rate> <rx-byte-rate> <rx-load> <rx-ucast> <rx-mcast> <rx-bcast> <rx-discards> <rx-errors> <rx-unknown> <rx-bandwidth> <tx-len> <tx-bytes> <tx-pkt-rate> <tx-byte-rate> <tx-load> <tx-ucast> <tx-mcast> <tx-bcast> <tx-discards> <tx-errors> <tx-bandwidth> } ] [ <end-row> ] + } } ] ]

- OLD: show ngoam traceroute statistics { summary | { session { <handle> | all } } } [ __readonly__ [ TABLE_stats { <sender-handle> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> } ] ]

- NEW: show ngoam traceroute statistics { summary | { session { <handle> | all } } } [ __readonly__ [ TABLE_stats { <sender-handle> <last-clear-stats> TABLE_stats_attr { <stat-attr> <stat-value> } } ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> } ] ]

- OLD: show nxapi [ __readonly__ <nxapi_status> [ configuration_error <c_error> ] [ <http_port> ] [ <https_port> ] ]

- NEW: show nxapi [ __readonly__ <nxapi_status> [ configuration_error <c_error> ] [ <http_port> ] [ <https_port> <ssl_issuer> <ssl_enddate> ] ]

- OLD: show otv isis [ <otv-isis-tag> ] [ site ] database [ mgroup ] [ detail | advertise | summary ] [ <lid> ] { [ zero-sequence ] | [ adjacency <adj-id> ] } [ vpn { <vrf-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> [ <dbase-hname-absent-out> ] [ { TABLE_process_lvl <dbase-level-out> [ { TABLE_process_lsp <dbase-lsp-name-out> <dbase-lsp-status-out> <dbase-lsp-absent-out> [ { <dbase-lsp-seqnum-out> <dbase-lsp-cksum-out> [ <dbase-lsp-lifetime-str-out> ] [ <dbase-lsp-lifetime-out> ] <dbase-att-out> <dbase-partition-out> <dbase-overload-out> <dbase-istype-out> } ] [ { <dbase-lsp-instance-out> [ { TABLE_process_tlv <dbase-lsp-tlv-name-out> [ <dbase-lsp-area-addr-out> ] [ <dbase-lsp-is-nbr-name-out> ] [ <dbase-lsp-is-nbr-metric-out> ] [ <dbase-lsp-is-nbr-ext-metric-out> ] [ <dbase-lsp-es-nbr-name-out> ] [ <dbase-lsp-es-nbr-metric-out> ] [ <dbase-lsp-es-nbr-ext-metric-out> ] [ <dbase-lsp-auth-type-out> ] [ <dbase-lsp-auth-len-out> ] [ <dbase-lsp-ext-is-name-out> ] [ <dbase-lsp-ext-is-metric-out> ] [ <dbase-lsp-ip-ri-addr-out> ] [ <dbase-lsp-ip-ri-mask-out> ] [ <dbase-lsp-ip-ri-metric-out> ] [ <dbase-lsp-ip-ri-ext-metric-out> ] [ <dbase-lsp-ip-ri-up-down-out> ] [ { TABLE_process_nlpid <dbase-lsp-prot-support-out> } ] [ <dbase-lsp-ip-addr-out> ] [ <dbase-lsp-ipv6-addr-out> ] [ { TABLE_process_extip <dbase-lsp-extip-addr-out> <dbase-lsp-extip-prefix-len-out> <dbase-lsp-extip-metric-out> <dbase-lsp-extip-up-down-out> } ] [ <dbase-lsp-hname-out> ] [ <dbase-lsp-hname-len-out> ] [ { TABLE_process_extipv6 <dbase-lsp-extipv6-addr-out> <dbase-lsp-extipv6-prefix-len-out> <dbase-lsp-extipv6-metric-out> <dbase-lsp-extipv6-up-down-out> <dbase-lsp-extipv6-ext-origin-out> } ] [ <dbase-lsp-tlv-len-out> ] [ <dbase-lsp-tlv-unknown-out> ] [ { TABLE_process_subtlv <dbase-lsp-subtlv-name-out> [ <dbase-lsp-extis-admin-group-out> ] [ <dbase-lsp-subtlv-ip-addr-out> ] [ <dbase-lsp-extis-bw-out> ] [ <dbase-lsp-extis-pri1-out> ] [ <dbase-lsp-extis-pri1-val-out> ] [ <dbase-lsp-extis-pri2-out> ] [ <dbase-lsp-extis-pri2-val-out> ] [ <dbase-lsp-extis-te-metric-out> ] [ <dbase-lsp-subtlv-len-out> ] [ <dbase-lsp-subtlv-unknown-out> ] } ] } ] <dbase-lsp-digest-out> } ] } ] [ { <dbase-lsp-total-out> [ { <dbase-lsp-empty-out> <dbase-lsp-zeroseq-out> } ] } ] } ] } } ]

- NEW: show otv isis [ <otv-isis-tag> ] [ site ] database [ mgroup ] [ detail | advertise | summary ] [ <lid> ] { [ zero-sequence ] | [ adjacency <adj-id> ] } [ vpn { <vrf-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> [ <dbase-hname-absent-out> ] [ { TABLE_process_lvl <dbase-level-out> [ { TABLE_process_lsp <dbase-lsp-name-out> <dbase-lsp-status-out> <dbase-lsp-absent-out> [ { <dbase-lsp-seqnum-out> <dbase-lsp-cksum-out> [ <dbase-lsp-lifetime-str-out> ] [ <dbase-lsp-lifetime-out> ] <dbase-att-out> <dbase-partition-out> <dbase-overload-out> <dbase-istype-out> } ] [ { <dbase-lsp-instance-out> [ { TABLE_process_tlv <dbase-lsp-tlv-name-out> [ <dbase-lsp-area-addr-out> ] [ <dbase-lsp-is-nbr-name-out> ] [ <dbase-lsp-is-nbr-metric-out> ] [ <dbase-lsp-is-nbr-ext-metric-out> ] [ <dbase-lsp-es-nbr-name-out> ] [ <dbase-lsp-es-nbr-metric-out> ] [ <dbase-lsp-es-nbr-ext-metric-out> ] [ <dbase-lsp-auth-type-out> ] [ <dbase-lsp-auth-len-out> ] [ <dbase-lsp-ext-is-name-out> ] [ <dbase-lsp-ext-is-metric-out> ] [ <dbase-lsp-ip-ri-addr-out> ] [ <dbase-lsp-ip-ri-mask-out> ] [ <dbase-lsp-ip-ri-metric-out> ] [ <dbase-lsp-ip-ri-ext-metric-out> ] [ <dbase-lsp-ip-ri-up-down-out> ] [ { TABLE_process_nlpid <dbase-lsp-prot-support-out> } ] [ <dbase-lsp-ip-addr-out> ] [ <dbase-lsp-ipv6-addr-out> ] [ { TABLE_process_extip <dbase-lsp-extip-addr-out> <dbase-lsp-extip-prefix-len-out> <dbase-lsp-extip-metric-out> <dbase-lsp-extip-up-down-out> } ] [ <dbase-lsp-hname-out> ] [ <dbase-lsp-hname-len-out> ] [ { TABLE_process_extipv6 <dbase-lsp-extipv6-addr-out> <dbase-lsp-extipv6-prefix-len-out> <dbase-lsp-extipv6-metric-out> <dbase-lsp-extipv6-up-down-out> <dbase-lsp-extipv6-ext-origin-out> } ] [ <dbase-lsp-tlv-len-out> ] [ <dbase-lsp-tlv-unknown-out> ] [ { TABLE_process_subtlv <dbase-lsp-subtlv-name-out> [ <dbase-lsp-extis-admin-group-out> ] [ <dbase-lsp-subtlv-ip-addr-out> ] [ <dbase-lsp-extis-bw-out> ] [ <dbase-lsp-extis-pri1-out> ] [ <dbase-lsp-extis-pri1-val-out> ] [ <dbase-lsp-extis-pri2-out> ] [ <dbase-lsp-extis-pri2-val-out> ] [ <dbase-lsp-extis-te-metric-out> ] [ <dbase-lsp-ext-ipv4-pfxsid> <dbase-lsp-ext-ipv4-pfxsid-flag> ] [ <dbase-lsp-ext-ipv6-pfxsid> <dbase-lsp-ext-ipv6-pfxsid-flag> ] [ <dbase-lsp-subtlv-len-out> ] [ <dbase-lsp-subtlv-unknown-out> ] } ] } ] <dbase-lsp-digest-out> } ] } ] [ { <dbase-lsp-total-out> [ { <dbase-lsp-empty-out> <dbase-lsp-zeroseq-out> } ] } ] } ] } } ]

- OLD: show otv isis [ <otv-isis-tag> ] ip redistribute mroute [ vlan <vlan-id> [ group <gip-addr> [ source <sip-addr> ] ] ] [ summary ] [ vpn { <vrf-name> | all } ] [ __readonly__ <tag-out> TABLE_process_tag <process-tag-out> <redist-ipv4-mrouter-vlanid-out> <redist-ipv4-vlanid-out> <redist-ipv4-source-addr-out> <redist-ipv4-group-addr-out> ]

- NEW: show otv isis [ <otv-isis-tag> ] ip redistribute mroute [ vlan <vlan-id> [ group <gip-addr> [ source <sip-addr> ] ] ] [ summary ] [ vpn { <vrf-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <af-string-out> <vrf-name-out> [ TABLE_mrouter <redist-ipv4-vlan> [ <redist-ipv4-mrouter-vlanid-out> ] [ <redist-ipv4-vlanid-out> ] [ <redist-ipv4-source-addr-out> ] [ <redist-ipv4-group-addr-out> ] [ <redist-ipv4-as-lsp> ] [ <redist-ipv4-recv-lsp> ] [ <redist-ipv4-mroute-vlan-id> ] [ <redist-ipv4-mroute-src-addr> ] [ <redist-ipv4-mroute-grp-addr> ] ] [ TABLE_summary <redist-ipv4-vlan> <redist-ipv4-group> <redist-ipv4-src-count> ] ]

- OLD: show policy-map type network-qos [ <pmap-name-nq> ] [ __readonly__ { [ <display-all> ] [ TABLE_xpmap <xpmap-name> [ <desc> ] [ TABLE_xcmap <xcmap-name> [ TABLE_action <action-key> [ <pause> <timeout> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <pfc-cos-list> ] [ <pfc_rx_only> ] [ <cc> ] [ <thresh-units> ] [ <min-thresh> ] [ <max-thresh> ] [ <drop-prob> ] [ <iod> ] [ <mtu> ] [ <set-cos> ] [ <dpp> ] [ <dctcp-threshold> ] [ <queue-limit> ] ] ] ] } ]

- NEW: show policy-map type network-qos [ <pmap-name-nq> ] [ __readonly__ { [ <display-all> ] [ TABLE_xpmap <xpmap-name> [ <desc> ] [ TABLE_xcmap <xcmap-name> [ TABLE_action <action-key> [ <cos-list> ] [ <qos-group-list> ] [ <protocol> ] [ <pause> <timeout> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <pfc-cos-list> ] [ <pfc_rx_only> ] [ <cc> ] [ <thresh-units> ] [ <min-thresh> ] [ <max-thresh> ] [ <drop-prob> ] [ <iod> ] [ <mtu> ] [ <set-cos> ] [ <dpp> ] [ <dctcp-threshold> ] [ <queue-limit> ] ] ] ] } ]

- OLD: show port-profile sync-status [ interface <intfname> ] [ __readonly__ <intf> + <status> + [ <inherit> ] [ <sync_status> ] [ <cached_cmds> ] [ <errors> ] [ <recovery> ] ]

- NEW: show port-profile sync-status [ interface <intfname> ] [ __readonly__ <intf> + [ <inherit> ] <status> + [ <sync_status> ] [ <cached_cmds> ] [ <errors> ] [ <recovery> ] ]

- OLD: show port-security address interface <interface-id> [ __readonly__ { TABLE_eth_port_sec_mac_addrs <vlan_id> <mac_addr> <type> <if_index> <remain_age> <remote_learnt> <remote_aged> <num_elems> } <total_addr> <max_sys_limit> <first> ]

- NEW: show port-security address interface <interface-id> [ __readonly__ { TABLE_eth_port_sec_mac_addrs <vlan_id> <mac_addr> <type> <if_index> <remain_age> <remote_learnt> <remote_aged> <num_elems> <cmd_addr_index> } <total_addr> <max_sys_limit> <first> ]

- OLD: show ptp clock [ __readonly__ <clock-id> <domain-id> <num-ports> <priority1> <priority2> <class> <accuracy> <scaled-log-variance> <offset-from-master> <mean-path-delay-to-master> <steps-removed> <device-type> <encap> <two-step-clock> <src-ip> <slave-only> [ <correction-threshold> ] [ <mean-path-delay-threshold> ] [ <gmTimeBaseIndicator> ] [ <last_gm_phase_change> ] [ <master_cum_scaled_rate_offset> ] [ <scaled_last_gm_freq_change> ] [ <cum_scaled_rate_offset> ] <local-clock-time> <bs-status> ]

- NEW: show ptp clock [ __readonly__ <clock-id> <domain-id> <num-ports> <priority1> <priority2> <class> <accuracy> <scaled-log-variance> <offset-from-master> <mean-path-delay-to-master> <steps-removed> <device-type> <encap> <slave-clock-oper> <master-clock-oper> <src-ip> <slave-only> [ <correction-threshold> ] [ <mean-path-delay-threshold> ] [ <gmTimeBaseIndicator> ] [ <last_gm_phase_change> ] [ <master_cum_scaled_rate_offset> ] [ <scaled_last_gm_freq_change> ] [ <cum_scaled_rate_offset> ] <local-clock-time> <bs-status> ]

- OLD: show ptp delay summary [ __readonly__ { TABLE_ptp <intf-name-port> <device-type> <state> <link-delay> } <ptp-end> <gptp-not-supported> ]

- NEW: show ptp delay summary [ __readonly__ [ TABLE_ptp <intf-name-port> <device-type> <state> <link-delay> ] [ <ptp-end> ] [ <gptp-not-supported> ] ]

- OLD: show ptp domain data [ __readonly__ [ TABLE_ptp <multidom_cap> <gm_cap> <gm_convergence_time> <def_dom> <transition_priority1> <transition_priority2> { TABLE_ptp_domain <domain_number> <domain_priority> <ptp_clock_class_threshold> <ptp_clock_accuracy_threshold> <ptp-ifindex> } ] <ptp-end> ]

- NEW: show ptp domain data [ __readonly__ [ TABLE_ptp <multidom_cap> <gm_cap> <gm_convergence_time> <def_dom> <transition_priority1> <transition_priority2> [ TABLE_ptp_domain <domain_number> <domain_priority> <ptp_clock_class_threshold> <ptp_clock_accuracy_threshold> <ptp-ifindex> ] ] <ptp-end> ]

- OLD: show ptp port interface <if0> [ __readonly__ <intf-name> <clock-id> <port-num> <version> <transport-mode> <accepted-ip> <state> <vlan> <delay-req-intv> <ann-rx-tout> <peer-mean-path-delay> <ann-intv> <sync-intv> <delay-mechanism> <peer-delay-req-intv> <device-type> <encap> [ <prop-delay-thresh> ] [ <neighbor-rate-ratio> ] <cost> <int-domain-id> ]

- NEW: show ptp port interface <if0> [ __readonly__ <intf-name> <clock-id> <port-num> <version> [ <transport-mode> ] [ <accepted-ip> ] <state> <vlan> <delay-req-intv> <ann-rx-tout> <peer-mean-path-delay> <ann-intv> <sync-intv> <delay-mechanism> [ <peer-delay-req-intv> ] [ <device-type> ] [ <encap> ] [ <prop-delay-thresh> ] [ <neighbor-rate-ratio> ] <cost> <int-domain-id> ]

- OLD: show queuing pfc-queue [ interface <if_list> ] [ module <module> ] [ detail ] [ __readonly__ <glb-wd-status> <glb-wd-timer> <glb-wd-timer-thresh> <glb-auto-restore> <glb-fixed-restore> <glb-int-intf-multi> <disable-action> <intf-multi> [ TABLE_queuing_interface <if_name_str> [ TABLE_qosgrp_stats <eq-qosgrp> [ TABLE_qosgrp_stats_entry <q-stat-type> <q-shutdown> <q-restored> <q-pkt-drained> <q-pkt-dropped> <q-pkt-drained-n-dropped> <q-aggr-pkt-dropped> <q-ing-pkt-dropped> <q-ing-aggr-pkt-dropped> ] ] [ TABLE_qosgrp_stats_summary <qosgrp-summary> ] ] ]

- NEW: show queuing pfc-queue [ interface <if_list> ] [ module <module> ] [ detail ] [ __readonly__ <glb-wd-status> <glb-wd-force-status> <glb-wd-timer> <glb-wd-timer-thresh> <glb-auto-restore> <glb-fixed-restore> <glb-int-intf-multi> <disable-action> <intf-multi> [ TABLE_queuing_interface <if_name_str> [ TABLE_qosgrp_stats <eq-qosgrp> [ TABLE_qosgrp_stats_entry <q-stat-type> <q-shutdown> <q-restored> <q-pkt-drained> <q-pkt-dropped> <q-pkt-drained-n-dropped> <q-aggr-pkt-dropped> <q-ing-pkt-dropped> <q-ing-aggr-pkt-dropped> ] ] [ TABLE_qosgrp_stats_summary <qosgrp-summary> ] ] ]

- OLD: show routing [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ip-addr> | { <ip-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <protocol> [ all ] } | { bind-label <bind-lbl> | next-hop <next-hop> | next-hop-v6 <next-hop-v6> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | detail ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ipnexthop> ] [ <ifname> ] [ <bindlbl> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] [ <ubest> ] [ <mbest> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientnameuni> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientnamemulti> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

- NEW: show routing [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ip-addr> | { <ip-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <protocol> [ all ] } | { bind-label <bind-lbl> | next-hop <next-hop> | next-hop-v6 <next-hop-v6> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | detail ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ipnexthop> ] [ <ifname> ] [ <bindlbl> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] [ <bgpbackuppath> ] [ <ubest> ] [ <mbest> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientnameuni> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientnamemulti> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

- OLD: show routing [ ip | ipv4 ] multicast sr [ vrf { <vrf-name> | <vrf-known-name> | all } ]

- NEW: show routing [ ip | ipv4 ] multicast sr [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <vrf-name> <mode> <mac-rewrite> [ TABLE_route <interface> <in-group-range> <to-group-range> <group-mask> <in-source-range> <to-source-range> <source-mask> ] ] ]

- OLD: show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] hash <source> <dest> [ ip-proto <ip-proto> ] [ <src-port> <dest-port> ] [ in-interface <in-interface> ] [ module <module-id> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> TABLE_hashpath <mcast> <hashpath> <hash-val> TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path <ubest> <mbest> <ipnexthop> <ifname> <pref> <metric> <uptime> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] ]

- NEW: show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] hash <source> <dest> [ ip-proto <ip-proto> ] { { [ gtpu-teid <gtpu-teid> ] } | { [ <src-port> <dest-port> ] } } [ in-interface <in-interface> ] [ module <module-id> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> TABLE_hashpath <mcast> <hashpath> <hash-val> TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path <ubest> <mbest> <ipnexthop> <ifname> <pref> <metric> <uptime> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] ]

- OLD: show sockets connection [ pid <pid> | tcp | udp | raw ] [ local { <srcIP> | <srcIP6> } ] [ foreign { <dstIP> | <dstIP6> } ] [ detail ] [ keydetails ] [ __readonly__ [ { TABLE_sockets <protocol> [ <total-conn-count> ] [ { TABLE_conn <afi> <prot> [ <tcp-state> ] [ <rcv-count> ] [ <laddr> ] [ <lport> ] [ <faddr> ] [ <fport> ] [ <intf> ] [ <vrf-name> ] [ <snd-count> ] [ <type> ] [ <ttl> ] [ <tos> ] [ <options> ] [ <state> ] [ <iss> ] [ <snd-una> ] [ <snd-nxt> ] [ <snd_wnd> ] [ <irs> ] [ <rcv-nxt> ] [ <rcv-wnd> ] [ <snd-cwnd> ] [ <srtt> ] [ <rtt> ] [ <rttvar> ] [ <krtt> ] [ <rttmin> ] [ <mss> ] [ <dur> ] [ <flags> ] [ <md5-cnt> ] [ <md5-host> ] [ <md5-err> ] [ <rcv-hiwat> ] [ <rcv-lowat> ] [ <rcv-flags> ] [ <snd-hiwat> ] [ <snd-lowat> ] [ <snd-flags> ] [ <tcp-count> ] [ <udp-count> ] [ <raw-count> ] } ] } ] ]

- NEW: show sockets connection [ pid <pid> | tcp | udp | raw ] [ local { <srcIP> | <srcIP6> } ] [ foreign { <dstIP> | <dstIP6> } ] [ detail ] [ keydetails ] [ __readonly__ [ { TABLE_sockets <protocol> [ <total-conn-count> ] [ { TABLE_conn <afi> [ <laddr> ] [ <lport> ] [ <faddr> ] [ <fport> ] [ <prot> ] [ <type> ] [ <ttl> ] [ <tos> ] [ <options> ] [ <state> ] [ <rcv-count> ] [ <rcv-hiwat> ] [ <rcv-lowat> ] [ <rcv-flags> ] [ <snd-count> ] [ <snd-hiwat> ] [ <snd-lowat> ] [ <snd-flags> ] [ <iss> ] [ <snd-una> ] [ <snd-nxt> ] [ <snd_wnd> ] [ <irs> ] [ <rcv-nxt> ] [ <rcv-wnd> ] [ <snd-cwnd> ] [ <srtt> ] [ <rtt> ] [ <rttvar> ] [ <krtt> ] [ <rttmin> ] [ <mss> ] [ <dur> ] [ <tcp-state> ] [ <flags> ] [ <md5-cnt> ] [ <md5-host> ] [ <md5-err> ] [ <tcp-count> ] [ <udp-count> ] [ <raw-count> ] [ <vrf-name> ] [ <intf> ] } ] } ] ]

- OLD: show sockets statistics [ all | tcp | tcp6 | tcpsum | udp | udp6 | udpsum | raw | raw6 | rawsum ] [ __readonly__ [ { TABLE_stat [ <rx-total> ] [ <rx-bad-csum> ] [ <rx-bad-offset> ] [ <rx-too-short> ] [ <rx-bad-md5> ] [ <rx-inseq-pack> ] [ <rx-inseq-bytes> ] [ <rx-dup-pack> ] [ <rx-dup-bytes> ] [ <rx-partdup-pack> ] [ <rx-partdup-bytes> ] [ <rx-oo-pack> ] [ <rx-oo-bytes> ] [ <rx-afterwin-pack> ] [ <rx-afterwin-bytes> ] [ <rx-afterclose-pack> ] [ <rx-winprobe-pack> ] [ <rx-winupdate-pack> ] [ <rx-dupack-pack> ] [ <rx-dupack-unsent-pack> ] [ <rx-ack-pack> ] [ <rx-ack-bytes> ] [ <rx-rcv-memdrop> ] [ <rx-dig-mssing> ] [ <rx-dig-unexpected> ] [ <rx-dig-notused> ] [ <rx-dig-valid> ] [ <rx-dig-invalid> ] [ <rx-get-passwd-fail> ] [ <rx-md5-mbuf-exded> ] [ <rx-uspec-src-recv> ] [ <rx-pkt-too-short> ] [ <rx-sin-finest> ] [ <rx-black-hole-syn> ] [ <rx-black-hole> ] [ <rx-drop-no-inpcb> ] [ <rx-drop-notcpcb> ] [ <rx-drp-sock-closed> ] [ <rx-syn-with-rst> ] [ <rx-syn-drop> ] [ <rx-bandlim> ] [ <rx-forged-pkt> ] [ <rx-drp-mbcast> ] [ <rx-drp-syn-add> ] [ <rx-drp-syn-recvd> ] [ <rx-drp-cc-sent> ] [ <rx-drp-rst-ccsent> ] [ <rx-frecv-enqueue> ] [ <rx-frecv-enqueue-fail> ] [ <rx-ftcp-cant-rcv-more> ] [ <rx-ftcp-data-ack-toapp-fail> ] [ <rx-ftcp-data-ack-toapp> ] [ <tx-total> ] [ <tx-urg> ] [ <tx-ctrl> ] [ <tx-data-pack> ] [ <tx-data-bytes> ] [ <tx-reasm-pack> ] [ <tx-reasm-bytes> ] [ <tx-ackonly-pack> ] [ <tx-winprobe-pack> ] [ <tx-winupdate-bytes> ] [ <tx-encrypt> ] [ <tx-unencrypt> ] [ <tx-md5rst> ] [ <tx-conn-init> ] [ <tx-conn-accepted> ] [ <tx-conn-estd> ] [ <closed> ] [ <dropped> ] [ <emb-dropped> ] [ <tx-rxmt-timeout> ] [ <tx-rxmt-timeout-dropped> ] [ <tx-ka-timeout> ] [ <tx-ka-probe> ] [ <tx-ka-drop> ] [ <gen-seg-timed> ] [ <gen-rtt-updated> ] [ <gen-delack> ] [ <gen-persist-timeout> ] [ <gen-paws-drop> ] [ <gen-predack> ] [ <gen-preddat> ] [ <gen-pcb-cachemiss> ] [ <gen-cache-drtt> ] [ <gen-cache-drttvar> ] [ <gen-cached-ssthresh> ] [ <gen-usedrtt> ] [ <gen-usedrttvar> ] [ <gen-usedssthresh> ] [ <gen-persistdrop> ] [ <gen-badsyn> ] [ <gen-mturesent> ] [ <gen-list-endrop> ] [ <gen-rpm-bind-synsock> ] [ <gen-rpm-bindsynadd> ] [ <gen-rpm-bindlookup> ] [ <gen-rpm-bindsetsock> ] [ <gen-rpm-unbind-getpass> ] [ <gen-rpm-unbinduser1> ] [ <gen-rpm-unbinduser2> ] [ <gen-rpm-unbindrollover> ] [ <gen-rpm-unbind-synfree> ] [ <gen-rpm-unbind-tpfree> ] [ <syn-sc-added> ] [ <syn-retransmitted> ] [ <syn-dupsyn> ] [ <syn-dropped> ] [ <syn-completed> ] [ <syn-bucket-overflow> ] [ <syn-cache-overflow> ] [ <syn-sc-reset> ] [ <syn-sc-stale> ] [ <syn-sc-aborted> ] [ <syn-sc-badack> ] [ <syn-sc-unreach> ] [ <syn-sc-zonefail> ] [ <syn-sc-sendcookie> ] [ <syn-sc-recvcookie> ] [ <syn-sc-crosshits> ] [ <syn-sc-supsyncrosshits> ] [ <syn-sc-removecrosshits> ] [ <udp-rx-total> ] [ <udp-rx-bad-csum> ] [ <udp-rx-no-csum> ] [ <udp-rx-too-short> ] [ <udp-rx-bad-len> ] [ <udp-rx-no-port> ] [ <udp-rx-no-port-bcast> ] [ <udp-rx-no-port-mcast> ] [ <udp-rx-full-socket-drop> ] [ <udp-tx-total> ] [ <raw-rx-version> ] [ <raw-rx-rcvd> ] [ <raw-rx-no-port> ] [ <raw-rx-full-socket-drop> ] [ <raw-tx-sent> ] [ <inpcb-tot-alloc> ] [ <inpcb-tot-bind> ] [ <inpcb-tot-laddr> ] [ <inpcb-tot-connect> ] [ <inpcb-tot-disconnect> ] [ <inpcb-tot-detach> ] [ <inpcb-tot-detach-noinc> ] [ <inpcb-tot-detach-rort> ] [ <inpcb-tot-rtfree> ] [ <inpcb-tot-setsock-addr> ] [ <inpcb-tot-setpeeraddr> ] [ <inpcb-tot-notify> ] [ <inpcb-tot-lookup-npacl-deny> ] [ <inpcb-tot-lookup-npacl-allow> ] [ <inpcb-tot-inshash-ipv4> ] [ <inpcb-tot-inshash-ipv6> ] [ <inpcb-tot-brehash-ipv4> ] [ <inpcb-tot-brehash-ipv6> ] [ <inpcb-tot-bremhash> ] [ <inpcb-err-allocnomem> ] [ <inpcb-err-bindeinavl> ] [ <inpcb-err-eaddrinuse> ] [ <inpcb-err-eagain> ] [ <inpcb-err-eagain2> ] [ <inpcb-err-eaddrnotavail> ] [ <inpcb-err-eafnosupport> ] [ <inpcb-err-enomem> ] [ <inpcb-err-ehostunreach> ] [ <inpcb-err-laddr-enxio> ] [ <inpcb-err-laddr-ehostunreach2> ] [ <inpcb-err-connectladdr> ] [ <inpcb-err-connect-eaddrinuse> ] [ <inpcb-err-connbind> ] [ <inpcb-err-sockaddrenomem> ] [ <inpcb-err-sockaddreconnreset> ] [ <inpcb-err-peeraddr-enomem> ] [ <inpcb-err-econnrest> ] [ <inpcb-err-respond-enobufs> ] [ <inpcb-err-binshash-enobufs> ] [ <in6pcb-tot-setport> ] [ <in6pcb-tot-bind> ] [ <in6pcb-tot-laddr> ] [ <in6pcb-tot-connect> ] [ <in6pcb-tot-disconnect> ] [ <in6pcb-tot-detach> ] [ <in6pcb-tot-sockaddr> ] [ <in6pcb-tot-peeraddr> ] [ <in6pcb-tot-notify> ] [ <in6pcb-tot-lookuplocal> ] [ <in6pcb-tot-hashnpacl-deny> ] [ <in6pcb-err-setporteagain> ] [ <in6pcb-err-setporteagain2> ] [ <in6pcb-err-seteagain3> ] [ <in6pcb-bind-eafnosupport> ] [ <in6pcb-err-bindeaddrinuse> ] [ <in6pcb-err-bindeaddrinuse2> ] [ <in6pcb-err-bindeaddrinuse3> ] [ <in6pcb-err-bindeaddrinuse4> ] [ <in6pcb-err-bindsetport> ] [ <in6pcb-err-bindeagain> ] [ <in6pcb-err-laddr-eafnosupport> ] [ <in6pcb-err-eaddrnotavail> ] [ <in6pcb-err-laddr-enomem> ] [ <in6pcb-err-laddr-ehostreach> ] [ <in6pcb-err-laddr-ehostunreach2> ] [ <in6pcb-err-laddr-ehostunreach3> ] [ <in6pcb-err-laddr-ehostunreach4> ] [ <in6pcb-err-laddr-enxio> ] [ <in6pcb-err-connladdr> ] [ <in6pcb-err-conneaddrinuse> ] [ <in6pcb-err-connbind> ] [ <in6pcb-err-sockaddr-enomem> ] [ <in6pcb-err-v4maps-enomem> ] [ <in6pcb-err-setsock-noinp> ] [ <in6pcb-err-setpeer-noinp> ] [ <in6pcb-err-sockaddr-noinp> ] [ <in6pcb-err-peeraddr-noinp> ] [ <in6pcb-err-notify-einavl> ] [ <in6pcb-err-ctloutput-nosoopt> ] } ] ]

- NEW: show sockets statistics [ all | tcp | tcp6 | tcpsum | udp | udp6 | udpsum | raw | raw6 | rawsum ] [ __readonly__ [ { TABLE_stat [ <rx-total> ] [ <rx-bad-csum> ] [ <rx-bad-offset> ] [ <rx-too-short> ] [ <rx-bad-md5> ] [ <rx-inseq-pack> ] [ <rx-inseq-bytes> ] [ <rx-dup-pack> ] [ <rx-dup-bytes> ] [ <rx-partdup-pack> ] [ <rx-partdup-bytes> ] [ <rx-oo-pack> ] [ <rx-oo-bytes> ] [ <rx-oo-drop-cnt> ] [ <rx-afterwin-pack> ] [ <rx-afterwin-bytes> ] [ <rx-afterclose-pack> ] [ <rx-winprobe-pack> ] [ <rx-winupdate-pack> ] [ <rx-dupack-pack> ] [ <rx-dupack-unsent-pack> ] [ <rx-ack-pack> ] [ <rx-ack-bytes> ] [ <rx-rcv-memdrop> ] [ <rx-dig-mssing> ] [ <rx-dig-unexpected> ] [ <rx-dig-notused> ] [ <rx-dig-valid> ] [ <rx-dig-invalid> ] [ <rx-get-passwd-fail> ] [ <rx-md5-mbuf-exded> ] [ <rx-uspec-src-recv> ] [ <rx-pkt-too-short> ] [ <rx-sin-finest> ] [ <rx-black-hole-syn> ] [ <rx-black-hole> ] [ <rx-drop-no-inpcb> ] [ <rx-drop-notcpcb> ] [ <rx-drp-sock-closed> ] [ <rx-syn-with-rst> ] [ <rx-syn-drop> ] [ <rx-bandlim> ] [ <rx-forged-pkt> ] [ <rx-drp-mbcast> ] [ <rx-drp-syn-add> ] [ <rx-drp-syn-recvd> ] [ <rx-drp-cc-sent> ] [ <rx-drp-rst-ccsent> ] [ <rx-frecv-enqueue> ] [ <rx-frecv-enqueue-fail> ] [ <rx-ftcp-cant-rcv-more> ] [ <rx-ftcp-data-ack-toapp-fail> ] [ <rx-ftcp-data-ack-toapp> ] [ <tx-total> ] [ <tx-urg> ] [ <tx-ctrl> ] [ <tx-data-pack> ] [ <tx-data-bytes> ] [ <tx-reasm-pack> ] [ <tx-reasm-bytes> ] [ <tx-ackonly-pack> ] [ <tx-winprobe-pack> ] [ <tx-winupdate-bytes> ] [ <tx-encrypt> ] [ <tx-unencrypt> ] [ <tx-md5rst> ] [ <tx-conn-init> ] [ <tx-conn-accepted> ] [ <tx-conn-estd> ] [ <closed> ] [ <dropped> ] [ <emb-dropped> ] [ <tx-rxmt-timeout> ] [ <tx-rxmt-timeout-dropped> ] [ <tx-ka-timeout> ] [ <tx-ka-probe> ] [ <tx-ka-drop> ] [ <gen-seg-timed> ] [ <gen-rtt-updated> ] [ <gen-delack> ] [ <gen-persist-timeout> ] [ <gen-paws-drop> ] [ <gen-predack> ] [ <gen-preddat> ] [ <gen-pcb-cachemiss> ] [ <gen-cache-drtt> ] [ <gen-cache-drttvar> ] [ <gen-cached-ssthresh> ] [ <gen-usedrtt> ] [ <gen-usedrttvar> ] [ <gen-usedssthresh> ] [ <gen-persistdrop> ] [ <gen-badsyn> ] [ <gen-mturesent> ] [ <gen-list-endrop> ] [ <gen-rpm-bind-synsock> ] [ <gen-rpm-bindsynadd> ] [ <gen-rpm-bindlookup> ] [ <gen-rpm-bindsetsock> ] [ <gen-rpm-unbind-getpass> ] [ <gen-rpm-unbinduser1> ] [ <gen-rpm-unbinduser2> ] [ <gen-rpm-unbindrollover> ] [ <gen-rpm-unbind-synfree> ] [ <gen-rpm-unbind-tpfree> ] [ <syn-sc-added> ] [ <syn-retransmitted> ] [ <syn-dupsyn> ] [ <syn-dropped> ] [ <syn-completed> ] [ <syn-bucket-overflow> ] [ <syn-cache-overflow> ] [ <syn-sc-reset> ] [ <syn-sc-stale> ] [ <syn-sc-aborted> ] [ <syn-sc-badack> ] [ <syn-sc-unreach> ] [ <syn-sc-zonefail> ] [ <syn-sc-sendcookie> ] [ <syn-sc-recvcookie> ] [ <syn-sc-crosshits> ] [ <syn-sc-supsyncrosshits> ] [ <syn-sc-removecrosshits> ] [ <udp-rx-total> ] [ <udp-rx-bad-csum> ] [ <udp-rx-no-csum> ] [ <udp-rx-too-short> ] [ <udp-rx-bad-len> ] [ <udp-rx-no-port> ] [ <udp-rx-no-port-bcast> ] [ <udp-rx-no-port-mcast> ] [ <udp-rx-full-socket-drop> ] [ <udp-tx-total> ] [ <raw-rx-version> ] [ <raw-rx-rcvd> ] [ <raw-rx-no-port> ] [ <raw-rx-full-socket-drop> ] [ <raw-tx-sent> ] [ <inpcb-tot-alloc> ] [ <inpcb-tot-bind> ] [ <inpcb-tot-laddr> ] [ <inpcb-tot-connect> ] [ <inpcb-tot-disconnect> ] [ <inpcb-tot-detach> ] [ <inpcb-tot-detach-noinc> ] [ <inpcb-tot-detach-rort> ] [ <inpcb-tot-rtfree> ] [ <inpcb-tot-setsock-addr> ] [ <inpcb-tot-setpeeraddr> ] [ <inpcb-tot-notify> ] [ <inpcb-tot-lookup-npacl-deny> ] [ <inpcb-tot-lookup-npacl-allow> ] [ <inpcb-tot-inshash-ipv4> ] [ <inpcb-tot-inshash-ipv6> ] [ <inpcb-tot-brehash-ipv4> ] [ <inpcb-tot-brehash-ipv6> ] [ <inpcb-tot-bremhash> ] [ <inpcb-err-allocnomem> ] [ <inpcb-err-bindeinavl> ] [ <inpcb-err-eaddrinuse> ] [ <inpcb-err-eagain> ] [ <inpcb-err-eagain2> ] [ <inpcb-err-eaddrnotavail> ] [ <inpcb-err-eafnosupport> ] [ <inpcb-err-enomem> ] [ <inpcb-err-ehostunreach> ] [ <inpcb-err-laddr-enxio> ] [ <inpcb-err-laddr-ehostunreach2> ] [ <inpcb-err-connectladdr> ] [ <inpcb-err-connect-eaddrinuse> ] [ <inpcb-err-connbind> ] [ <inpcb-err-sockaddrenomem> ] [ <inpcb-err-sockaddreconnreset> ] [ <inpcb-err-peeraddr-enomem> ] [ <inpcb-err-econnrest> ] [ <inpcb-err-respond-enobufs> ] [ <inpcb-err-binshash-enobufs> ] [ <in6pcb-tot-setport> ] [ <in6pcb-tot-bind> ] [ <in6pcb-tot-laddr> ] [ <in6pcb-tot-connect> ] [ <in6pcb-tot-disconnect> ] [ <in6pcb-tot-detach> ] [ <in6pcb-tot-sockaddr> ] [ <in6pcb-tot-peeraddr> ] [ <in6pcb-tot-notify> ] [ <in6pcb-tot-lookuplocal> ] [ <in6pcb-tot-hashnpacl-deny> ] [ <in6pcb-err-setporteagain> ] [ <in6pcb-err-setporteagain2> ] [ <in6pcb-err-seteagain3> ] [ <in6pcb-bind-eafnosupport> ] [ <in6pcb-err-bindeaddrinuse> ] [ <in6pcb-err-bindeaddrinuse2> ] [ <in6pcb-err-bindeaddrinuse3> ] [ <in6pcb-err-bindeaddrinuse4> ] [ <in6pcb-err-bindsetport> ] [ <in6pcb-err-bindeagain> ] [ <in6pcb-err-laddr-eafnosupport> ] [ <in6pcb-err-eaddrnotavail> ] [ <in6pcb-err-laddr-enomem> ] [ <in6pcb-err-laddr-ehostreach> ] [ <in6pcb-err-laddr-ehostunreach2> ] [ <in6pcb-err-laddr-ehostunreach3> ] [ <in6pcb-err-laddr-ehostunreach4> ] [ <in6pcb-err-laddr-enxio> ] [ <in6pcb-err-connladdr> ] [ <in6pcb-err-conneaddrinuse> ] [ <in6pcb-err-connbind> ] [ <in6pcb-err-sockaddr-enomem> ] [ <in6pcb-err-v4maps-enomem> ] [ <in6pcb-err-setsock-noinp> ] [ <in6pcb-err-setpeer-noinp> ] [ <in6pcb-err-sockaddr-noinp> ] [ <in6pcb-err-peeraddr-noinp> ] [ <in6pcb-err-notify-einavl> ] [ <in6pcb-err-ctloutput-nosoopt> ] } ] ]

- OLD: show tacacs-server { <host0> } [ __readonly__ { <host1> } [ <tac_port> ] [ <tac_shared_key> ] [ <time_out> ] [ <tac_idle_time> ] [ <test_user_name> ] <test_pwd> ]

- NEW: show tacacs-server { <host0> } [ __readonly__ { <host1> } [ <tac_port> ] [ <tac_shared_key> ] [ <time_out> ] [ <conn_type> ] [ <tac_idle_time> ] [ <test_user_name> ] <test_pwd> ]

- OLD: show tech-support all [ non-time-optimized ]

- NEW: show tech-support all [ space-optimized ] [ time-optimized ]

- OLD: show vrrpv3 [ brief | detail | statistics ] [ <intf> [ <group_num> ] ] [ <opt_v4_or_v6> ] [ all ] [ __readonly__ [ <global_drops> ] [ [ { TABLE_istats [ <i_intf> ] [ <i_drops> ] [ <ttl> ] [ <checksum> ] [ <version> ] [ <type> ] [ <length> ] [ <badid> ] [ <other> ] } ] [ { TABLE_grp [ <intf> ] [ <id> ] [ <af> ] [ <desc> ] [ <state> ] [ <duration> ] [ <vip> ] [ { TABLE_sec [ <addr> ] [ <prefix> ] } ] [ <vmac> ] [ <adv> ] [ <owner> ] [ <preempt> ] [ <delay> ] [ <delay_rem> ] [ <priority> ] [ <m_addr> ] [ <m_priority> ] [ <m_adv> ] [ <m_expire> ] [ <down> ] [ <down_expire> ] [ <adv_sent> ] [ <adv_err> ] [ <adv_recvd> ] [ <v2adv_sent> ] [ <v2adv_err> ] [ <v2adv_recvd> ] [ <drops> ] [ <incompat> ] [ <conflict> ] [ <bad_count> ] [ <bad_addr> ] [ <bad_config> ] [ <bad_advert> ] [ <bad_state> ] [ <bad_other> ] [ <init_master> ] [ <init_master_time> ] [ <init_backup> ] [ <init_backup_time> ] [ <back_master> ] [ <back_master_time> ] [ <master_back> ] [ <master_back_time> ] [ <mast_init> ] [ <mast_init_time> ] [ <back_init> ] [ <back_init_time> ] } ] ] + [ { TABLE_vbrief [ <intf_b> ] [ <id_b> ] [ <af_b> ] [ <priority_b> ] [ <down_b> ] [ <owner_b> ] [ <preempt_b> ] [ <state_b> ] [ <m_addr_b> ] [ <vip_b> ] } ] ]

- NEW: show vrrpv3 [ brief | detail | statistics ] [ <intf> [ <group_num> ] ] [ <opt_v4_or_v6> ] [ all ] [ __readonly__ [ <global_drops> ] [ [ { TABLE_istats [ <i_intf> ] [ <i_drops> ] [ <ttl> ] [ <checksum> ] [ <version> ] [ <type> ] [ <length> ] [ <badid> ] [ <other> ] } ] [ { TABLE_grp [ <intf> ] [ <id> ] [ <af> ] [ <desc> ] [ <state> ] [ <duration> ] [ <vip> ] [ { TABLE_sec [ <addr> ] [ <prefix> ] } ] [ <vmac> ] [ <adv> ] [ <owner> ] [ <preempt> ] [ <delay> ] [ <delay_rem> ] [ <priority> ] [ <cfg_priority> ] [ <m_addr> ] [ <m_priority> ] [ <m_adv> ] [ <m_expire> ] [ <down> ] [ <down_expire> ] [ <t_id> ] [ <t_dec_prio> ] [ <t_state> ] [ <adv_sent> ] [ <adv_err> ] [ <adv_recvd> ] [ <v2adv_sent> ] [ <v2adv_err> ] [ <v2adv_recvd> ] [ <drops> ] [ <incompat> ] [ <conflict> ] [ <bad_count> ] [ <bad_addr> ] [ <bad_config> ] [ <bad_advert> ] [ <bad_state> ] [ <bad_other> ] [ <init_master> ] [ <init_master_time> ] [ <init_backup> ] [ <init_backup_time> ] [ <back_master> ] [ <back_master_time> ] [ <master_back> ] [ <master_back_time> ] [ <mast_init> ] [ <mast_init_time> ] [ <back_init> ] [ <back_init_time> ] } ] ] + [ { TABLE_vbrief [ <intf_b> ] [ <id_b> ] [ <af_b> ] [ <priority_b> ] [ <down_b> ] [ <owner_b> ] [ <preempt_b> ] [ <state_b> ] [ <m_addr_b> ] [ <vip_b> ] } ] ]

Deprecated Show Commands in Cisco NX-OS Release 9.2(2)

The following commands are removed in this release.

- show system dme status [ __readonly__ <dme-status> ]

Chapter 26. New, Changed, and Deprecated Show Commands in Cisco Nexus 9000 Release 9.2(3)

- New Commands in Cisco NX-OS Release 9.2(3)

- Changed Commands in Cisco NX-OS Release 9.2(3)

New Commands in Cisco NX-OS Release 9.2(3)

The following commands are added in this release.

- show aaa client radius statistics <host0> [ __readonly__ TABLE_allstat [ <auth_client> ] TABLE_allcoastat [ <requests> ] [ <transactions> ] [ <retransmissions> ] [ <active_trans> ] [ <ack_responses> ] [ <nak_responses> ] [ <invalid_req> ] [ <errors> ] ]

- show aaa server radius statistics [ __readonly__ TABLE_allstat [ <auth_ser> ] [ <coa_sessions> ] TABLE_alldot1xstat [ <request_sent> ] [ <resp_received> ] [ <resp_timeout> ] [ <errors> ] ]

- show consistency-checker racl svi interface <vlan-id>

- show consistency-checker selective-qinq

- show consistency-checker selective-qinq interface { <int-id> | <ch-id> }

- show logging dropcount

- show logging rfc-strict

- show nbm flows static [ group <grp> ] [ source <src> ]

- show ngoam mct-stats [ __readonly__ <sent> <rcvd> <resp-sent> <resp-rcvd> <send-fail> <rcv-fail> <send-rel-fail> ]

- show pnp lease

- show pnp posix_pi configs

- show pnp posix_pi tech-support

- show pnp profiles

- show pnp status

- show pnp summary

- show pnp version

- show username <username> passphrase timevalues [ __readonly__ [ timevalues [ <tvalue> ] ] [ passphrase_change <last_passphrase_change> ] [ Default_lifetime <def_ltime> ] [ Default_warntime <def_wrntime> ] [ Default_gracetime <def_gtime> ] ]

- show userpassphrase { default-lifetime | default-warntime | default-gracetime | timevalues } [ __readonly__ [ Default_warntime <def_wrntime> ] [ Default_gracetime <def_gtime> ] [ Default_lifetime <def_ltime> ] ]

- show vpc fabric-ports [ __readonly__ [ { TABLE_fabric_ports <vpc-fabric-ports> } ] ]

- show vpc virtual-peerlink dest reachable

- show vpc virtual-peerlink vlan consistency

Changed Commands in Cisco NX-OS Release 9.2(3)

The following commands are changed in this release.

- OLD: show [ <ip_ipv6_mac> ] access-lists [ <name> ] [ capture session <capture_session> ] [ <expanded> | <summary> | <private> | <brief> | <stats-detail> ] [ __readonly__ TABLE_ip_ipv6_mac <op_ip_ipv6_mac> <show_summary> <acl_name> [ <statistics> ] [ <frag_opt_permit_deny> ] [ <global_capture_session> ] [ TABLE_seqno <seqno> { <permitdeny> [ <proto_str> | <proto> | <ip> | <ipv6> ] { <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_ipv6_addr> <src_ipv6_mask> | <mac_src> <mac_src_wild> | <src_addrgrp> } [ <src_port_op> [ <src_port1_str> ] { <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_ipv6_addr> <dest_ipv6_mask> | <mac_dest> <mac_dest_wild> | <dest_addrgrp> } [ <dest_port_op> [ <dest_port1_str> ] { <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] [ <igmp_type> | <igmp_type_str> ] [ [ <precedence> | <precedence_str> ] [ <tos> | <tos_str> ] | [ <dscp> | <dscp_str> ] | [ <ttl> ] ] [ <log> ] [ <udfs> ] [ <capture_session> ] [ <fragments> ] [ <plen_op> <plen1> [ <plen2> ] ] [ <urg> ] [ <ack> ] [ <psh> ] [ <rst> ] [ <syn> ] [ <fin> ] [ <established> ] [ <http-method> | <http_opt_str> ] [ <tcp-option-length> ] [ <tcp-flags-mask> ] [ <flow_label> ] [ <timerange> ] [ <eth_proto> | <eth_proto_str> ] [ <vlan> ] [ <cos> ] [ <match_count> ] | [ TABLE_match <module> <module_match_count> ] | [ <nve_vni> ] | <remark> [ <action> <actionid> ] } ] [ ethertype <ethertypeid> | vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ <action> <actionid> ] [ [ <stats_enabled> ] [ <frag_option> ] { <num_ace> } { <conf_if_header> } [ <conf_if> ] { <active_if_header> } [ <active_if> ] ] ]

- NEW: show [ <ip_ipv6_mac> ] access-lists [ <name> ] [ capture session <capture_session> ] [ <expanded> | <summary> | <private> | <brief> | <stats-detail> ] [ __readonly__ TABLE_ip_ipv6_mac <op_ip_ipv6_mac> <show_summary> <acl_name> [ <statistics> ] [ <frag_opt_permit_deny> ] [ <global_capture_session> ] [ TABLE_seqno <seqno> { <permitdeny> [ <proto_str> | <proto> | <ip> | <ipv6> ] { <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_ipv6_addr> <src_ipv6_mask> | <mac_src> <mac_src_wild> | <src_addrgrp> } [ <src_port_op> [ <src_port1_str> ] { <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_ipv6_addr> <dest_ipv6_mask> | <mac_dest> <mac_dest_wild> | <dest_addrgrp> } [ <dest_port_op> [ <dest_port1_str> ] { <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] [ <igmp_type> | <igmp_type_str> ] [ [ <precedence> | <precedence_str> ] [ <tos> | <tos_str> ] | [ <dscp> | <dscp_str> ] | [ <ttl> ] ] [ <log> ] [ <udfs> ] [ <capture_session> ] [ <fragments> ] [ <plen_op> <plen1> [ <plen2> ] ] [ <urg> ] [ <ack> ] [ <psh> ] [ <rst> ] [ <syn> ] [ <fin> ] [ <established> ] [ <http-method> | <http_opt_str> ] [ <tcp-option-length> ] [ <tcp-flags-mask> ] [ <flow_label> ] [ <timerange> ] [ <eth_proto> | <eth_proto_str> ] [ <vlan> ] [ <cos> ] [ <match_count> ] | [ TABLE_match <module> <module_match_count> ] | [ <nve_vni> ] | <remark> [ <action> <actionid> ] } ] [ ethertype <ethertypeid> | vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ <action> <actionid> ] [ [ <stats_enabled> ] [ <frag_option> ] [ <ign_rtable> ] { <num_ace> } { <conf_if_header> } [ <conf_if> ] { <active_if_header> } [ <active_if> ] ] ]

- OLD: show acl status [ __readonly__ [ <status_log_string> ] ]

- NEW: show acl status [ __readonly__ [ <current_operation> [ <current_operation_stage> ] [ <current_operation_cli> ] <last_operation> [ <last_operation_status> ] [ <last_operation_cli> ] [ <current_acl> ] [ <current_ace> ] ] ]

- OLD: show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ multihop ] | [ module <module_no> ] | [ interface <intf_id> ] | [ application <bfd_cli_client_names> ] | [ { src-ip <src_ip> | src-ipv6 <src_ipv6> } ] | [ { dest-ip <dest_ip> | dest-ipv6 <dest_ipv6> } ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ details ] [ __readonly__ TABLE_bfdNeighbor <local_disc> [ <header> ] [ <sess_type> ] [ <vrf_name> ] [ <src_ip_addr> ] [ <src_ipv6_addr> ] [ <dest_ip_addr> ] [ <dest_ipv6_addr> ] [ <remote_disc> ] [ <local_state> ] [ <remote_state> ] [ <holddown> ] [ <cur_detect_mult> ] [ <intf> ] [ <echo> ] [ <echo_tx> ] [ <local_diag> ] [ <demand> ] [ <poll> ] [ <min_tx> ] [ <min_rx> ] [ <local_multi> ] [ <detect_timer> ] [ <down_count> ] [ <tx_interval> ] [ <rx_count> ] [ <rx_avg> ] [ <rx_min> ] [ <rx_max> ] [ <last_rx> ] [ <tx_count> ] [ <tx_avg> ] [ <tx_min> ] [ <tx_max> ] [ <last_tx> ] [ <app> ] [ <up_time> ] [ <version> ] [ <diag> ] [ <state_bit> ] [ <demand_bit> ] [ <poll_bit> ] [ <final_bit> ] [ <multiplier> ] [ <length> ] [ <my_disc> ] [ <your_disc> ] [ <min_tx_interval> ] [ <req_min_rx> ] [ <min_echo_interval> ] [ <out_str> ] [ <host_lc> ] [ <down_reason> ] [ <no_host_reason> ] [ <parent> ] [ <per_link_str> ] [ <auth> ] [ <auth_bit> ] [ <print_details> ] ]

- NEW: show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ multihop ] | [ module <module> ] | [ interface <intf_id> ] | [ application <bfd_cli_client_names> ] | [ { src-ip <src_ip> | src-ipv6 <src_ipv6> } ] | [ { dest-ip <dest_ip> | dest-ipv6 <dest_ipv6> } ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ details ] [ __readonly__ TABLE_bfdNeighbor <local_disc> [ <header> ] [ <sess_type> ] [ <vrf_name> ] [ <src_ip_addr> ] [ <src_ipv6_addr> ] [ <dest_ip_addr> ] [ <dest_ipv6_addr> ] [ <remote_disc> ] [ <local_state> ] [ <remote_state> ] [ <holddown> ] [ <cur_detect_mult> ] [ <intf> ] [ <echo> ] [ <echo_tx> ] [ <local_diag> ] [ <demand> ] [ <poll> ] [ <min_tx> ] [ <min_rx> ] [ <local_multi> ] [ <detect_timer> ] [ <down_count> ] [ <tx_interval> ] [ <rx_count> ] [ <rx_avg> ] [ <rx_min> ] [ <rx_max> ] [ <last_rx> ] [ <tx_count> ] [ <tx_avg> ] [ <tx_min> ] [ <tx_max> ] [ <last_tx> ] [ <app> ] [ <up_time> ] [ <version> ] [ <diag> ] [ <state_bit> ] [ <demand_bit> ] [ <poll_bit> ] [ <final_bit> ] [ <multiplier> ] [ <length> ] [ <my_disc> ] [ <your_disc> ] [ <min_tx_interval> ] [ <req_min_rx> ] [ <min_echo_interval> ] [ <out_str> ] [ <host_lc> ] [ <down_reason> ] [ <no_host_reason> ] [ <parent> ] [ <per_link_str> ] [ <auth> ] [ <auth_bit> ] [ <print_details> ] ]

- OLD: show boot [ __readonly__ { [ TABLE_bootvar_show <Str1> ] } ]

- NEW: show boot [ __readonly__ { [ TABLE_Current_Bootvar <current_sup_module> <current_image> <current_poap_status> ] [ TABLE_Startup_Bootvar <start_sup_module> <start_image> <start_poap_status> ] } ]

- OLD: show catena analytics { per-acl { per-node | per-device-group } | per-catena-instance <instance-name> [ per-chain [ <chain-id> ] ] } [ __readonly__ <instance_name> <per_node> <per_node_total> <per_node_total_val> <chain_id> <per_device_group> <per_device_group_hdr> <per_device_group_val> <stats_counter> ]

- NEW: show catena analytics { per-acl { per-node | per-device-group | per-vlan-group | per-port-group | total } | per-catena-instance <instance-name> [ per-chain [ <chain-id> ] ] } [ __readonly__ <instance_name> <per_node> <per_node_total> <per_node_total_val> <per_intf_total_val> <per_vlan_total_val> <chain_id> <per_device_group> <per_device_group_hdr> <per_device_group_val> <per_vlan_group> <per_vlan_group_hdr> <per_vlan_group_val> <per_port_group> <per_port_group_val> <per_port_group_hdr> <total_val> <stats_counter> ]

- OLD: show cfs application [ { name <cfs-dyn-app-name> | sap <i0> } ] [ __readonly__ [ { enabled <enabled> } { timeout <timeout> } { merge_capable <merge_capable> } { scope <scope> } { region <region> } ] [ { TABLE_apps <app_name> <app_enabled> <app_scope> } ] ]

- NEW: show cfs application [ { name <cfs-dyn-app-name> | sap <i0> } ] [ __readonly__ [ <enabled> <timeout> <merge_capable> <scope> <region> ] [ { TABLE_apps <app_name> <app_enabled> <app_scope> } ] ]

- OLD: show cfs status [ __readonly__ { distribution <distribution> } { distribution_over_ip <dist_over_ip> } { ipv4_multicast_address <ipv4_mcast_addr> } { ipv6_multicast_address <ipv6_mcast_addr> } { distribution_over_ethernet <dist_over_eth> } ]

- NEW: show cfs status [ __readonly__ <distribution> <dist_over_ip> <ipv4_mcast_addr> <ipv6_mcast_addr> <dist_over_eth> ]

- OLD: show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding [ ip | ipv4 ] [ unicast ] inconsistency [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> ]

- NEW: show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding [ ip | ipv4 ] [ unicast ] inconsistency [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> ]

- OLD: show consistency-checker forwarding ipv6 [ unicast ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding ipv6 [ unicast ] inconsistency [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> ]

- NEW: show consistency-checker forwarding ipv6 [ unicast ] [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding ipv6 [ unicast ] inconsistency [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> ]

- OLD: show consistency-checker vxlan config-check

- NEW: show consistency-checker vxlan config-check [ detail ]

- OLD: show consistency-checker vxlan l3 [ verbose ]

- NEW: show consistency-checker vxlan l3 vrf <vrf-name> { brief | detail }

- OLD: show elam report [ l2 | l3 | l4 | aclqos | mcast ] [ detail | summary ]

- NEW: show elam report [ l2 | l3 | l4 | aclqos | mcast | mpls ]

- OLD: show environment [ fan [ detail1 ] | power [ detail ] [ ampere ] [ input ] | temperature [ module <module> | <s0> <santa-cruz-range> | psu ] ] [ __readonly__ [ { TABLE_clockinfo <clockname> <clkmodel> <clkhwver> <clkstatus> <act_standby> } ] [ { fandetails [ { TABLE_faninfo <fanname> <fanmodel> <fanhwver> <fandir> <fanstatus> } ] { TABLE_fan_zone_speed <zone> <zonespeed> } <fan_filter_status> [ { TABLE_fantray <fanname> <trayfannum> <fandir> <fanperc> <fanrpm> } ] [ { TABLE_psufan <fanname> <fan1rpm> <fan2rpm> } ] } ] [ { powersup <voltage_level> { TABLE_psinfo <psnum> <psmodel> [ <actual_out> ] [ <actual_input> ] [ <tot_capa> ] [ <input_type> ] [ <watts> ] [ <amps> ] [ <ps_status> ] [ <ps_status_3k> ] } [ { TABLE_mod_pow_info <modnum> <mod_model> [ <actual_draw> ] [ <allocated> ] [ <watts_requested> ] [ <amps_requested> ] [ <watts_alloced> ] [ <amps_alloced> ] [ <modstatus> ] [ <modstatus_3k> ] } ] [ { power_summary [ <ps_redun_mode> ] [ <ps_redun_mode_3k> ] [ <ps_oper_mode> ] [ <ps_redun_op_mode> ] <tot_pow_capacity> [ <tot_gridA_capacity> ] [ <tot_gridB_capacity> ] [ <cumulative_power> ] [ <tot_pow_out_actual_draw> ] [ <tot_pow_input_actual_draw> ] [ <tot_pow_alloc_budgeted> ] [ <reserve_sup> ] [ <pow_used_by_mods> ] <available_pow> } ] [ { powersup_detail <reserve_sup> <reserve_xbar> <reserve_fan> <reserve_supxbarfan> <pow_used_by_mods> } ] <all_inlets_connected> [ { TABLE_ps_detail_info <det_name> <det_total_cap> <det_volt> <det_pintot> [ <det_pina> ] <det_vin> <det_iin> <det_pout> <det_vout> <det_iout> [ <det_pinb> ] [ <det_iinb> ] [ <det_vinb> ] [ <det_cord> ] <det_sw_alarm> [ { TABLE_det_hw_alarm_regval <regnum> <regval> } ] [ { TABLE_det_hw_alarm_str <regnumstr> <bitnumstr> <alarm_str> } ] } ] [ { TABLE_psinputinfo_n3k <ps_slot> <ps_input_voltage> <ps_input_current> <ps_in_power> <ps_output_voltage> <ps_output_current> <ps_state> } ] } ] [ { fandetails_3k [ { TABLE_faninfo <fanname> <fanmodel> <fanhwver> <fandir> <fanstatus> } ] { TABLE_fan_zone_speed <zone> <speed> } <fan_filter_status> [ { TABLE_fantray <fanname> <fannum> <fandir> <fanperc> <fanrpm> } ] [ { TABLE_psufan <fanname> <fan1rpm> <fan2rpm> } ] } ] [ { TABLE_tempinfo <tempmod> <sensor> <majthres> <minthres> <curtemp> <alarmstatus> [ <temptype> ] } ] [ { TABLE_psutempinfo <psumod> <inlet_temp> <outlet_temp> <heatsink_temp> } ] ]

- NEW: show environment [ fan [ detail1 ] | power [ detail ] [ ampere ] [ input ] | temperature [ module <module> | <s0> <santa-cruz-range> | psu ] ] [ __readonly__ [ { TABLE_clockinfo <clockname> <clkmodel> <clkhwver> <clkstatus> <act_standby> } ] [ { fandetails [ { TABLE_faninfo <fanname> <fanmodel> <fanhwver> <fandir> <fanstatus> } ] { TABLE_fan_zone_speed <zone> <zonespeed> } <fan_filter_status> [ { TABLE_fantray <fanname> <trayfannum> <fandir> <fanperc> <fanrpm> } ] [ { TABLE_psufan <fanname> <fan1rpm> <fan2rpm> } ] } ] [ { powersup [ <voltage_level> ] [ { TABLE_psinfo <psnum> <psmodel> [ <actual_out> ] [ <actual_input> ] [ <tot_capa> ] [ <input_type> ] [ <watts> ] [ <amps> ] [ <ps_status> ] [ <ps_status_3k> ] } ] [ { TABLE_mod_pow_info <modnum> <mod_model> [ <actual_draw> ] [ <allocated> ] [ <watts_requested> ] [ <amps_requested> ] [ <watts_alloced> ] [ <amps_alloced> ] [ <modstatus> ] [ <modstatus_3k> ] } ] [ { power_summary [ <ps_redun_mode> ] [ <ps_redun_mode_3k> ] [ <ps_oper_mode> ] [ <ps_redun_op_mode> ] <tot_pow_capacity> [ <tot_gridA_capacity> ] [ <tot_gridB_capacity> ] [ <cumulative_power> ] [ <tot_pow_out_actual_draw> ] [ <tot_pow_input_actual_draw> ] [ <tot_pow_alloc_budgeted> ] [ <reserve_sup> ] [ <pow_used_by_mods> ] <available_pow> } ] [ { powersup_detail <reserve_sup> <reserve_xbar> <reserve_fan> <reserve_supxbarfan> <pow_used_by_mods> } ] [ <all_inlets_connected> ] [ { TABLE_ps_detail_info <det_name> <det_total_cap> <det_volt> <det_pintot> [ <det_pina> ] <det_vin> <det_iin> <det_pout> <det_vout> <det_iout> [ <det_pinb> ] [ <det_iinb> ] [ <det_vinb> ] [ <det_cord> ] <det_sw_alarm> [ { TABLE_det_hw_alarm_regval <regnum> <regval> } ] [ { TABLE_det_hw_alarm_str <regnumstr> <bitnumstr> <alarm_str> } ] } ] [ { TABLE_psinputinfo_n3k <ps_slot> <ps_input_voltage> <ps_input_current> <ps_in_power> [ <ps_output_voltage> ] [ <ps_output_current> ] <ps_state> } ] } ] [ { fandetails_3k [ { TABLE_faninfo <fanname> <fanmodel> <fanhwver> <fandir> <fanstatus> } ] { TABLE_fan_zone_speed <zone> <speed> } <fan_filter_status> [ { TABLE_fantray <fanname> <fannum> <fandir> <fanperc> <fanrpm> } ] [ { TABLE_psufan <fanname> <fan1rpm> <fan2rpm> } ] } ] [ { TABLE_tempinfo <tempmod> <sensor> <majthres> <minthres> <curtemp> <alarmstatus> [ <temptype> ] } ] [ { TABLE_psutempinfo <psumod> <inlet_temp> <outlet_temp> <heatsink_temp> } ] ]

- OLD: show fabric database static-host [ __readonly__ [ TABLE_database_static_host { <host_key> <interface> <state> <retry_delay> <retry_attempts> } ] ]

- NEW: show fabric database static-host [ __readonly__ { TABLE_database_static_host <host_key> <interface> <state> <retry_delay> <retry_attempts> } ]

- OLD: show forwarding mpls drop-stats [ platform | label0-fwd-stats ] [ __readonly__ <pkts> <bytes> ]

- NEW: show forwarding mpls drop-stats [ platform | label0-fwd-stats ] [ __readonly__ [ { TABLE_drop_stats <unit-number> <pkts> <bytes> } ] ]

- OLD: show forwarding mpls ecmp [ module <module> ] [ platform ] [ __readonly__ [ { TABLE_ecmp <type> <num_paths> <ip_paths> <mpls_paths> <ecmp_hash> <holder> <refcount> <hw_index> [ { TABLE_ecmp_paths <out-intf> <out-ip> <label_info> <hh> <refcount> } ] } ] ]

- NEW: show forwarding mpls ecmp [ module <module> ] [ platform ] [ __readonly__ [ { TABLE_ecmp [ <type> ] [ <num_paths> ] [ <ip_paths> ] [ <mpls_paths> ] [ <ecmp_hash> ] [ <holder> ] [ <refcount> ] [ <hw_index> ] [ <fec> ] [ { TABLE_ecmp_paths [ <out-intf> ] [ <out-ip> ] [ <label-info> ] [ <refcount> ] [ <hh> ] [ <ecmp-type> ] } ] } ] ]

- OLD: show hardware profile status [ module <module> ] [ detail ] [ __readonly__ { <total_lpm> <total_host> <reserved_lpm> <max_host4_limit> <max_host6_limit> <max_mcast_limit> <max_mcast6_limit> <used_lpm_total> <used_v4_lpm> <used_v6_lpm> <used_v6_lpm_128> <used_host_lpm_total> <used_host_v4_lpm> <used_host_v6_lpm> <used_mcast> <used_mcast6> <used_mcast_oifl> <used_host_in_host_total> <used_host4_in_host> <used_host6_in_host> <mfib_fd_status> <mfib_fd_maxroute> <mfib_fd_count> <max_v6_lpm_65_to_127_limit> <max_v6_lpm_limit> <max_ecmp_table_limit> <used_ecmp_table> <lpm_to_host_migrate_table> <host_to_lpm_migrate_table> <max_mcast_transit_route_limit> <used_mcast_transit_routes> <max_ecmp_nh_table_limit> <used_ecmp_nh_table> } ]

- NEW: show hardware profile status [ module <module> ] [ detail ] [ __readonly__ { <total_lpm> <total_host> <reserved_lpm> <max_host4_limit> <max_host6_limit> <max_mcast_limit> <max_mcast6_limit> [ <max_mcast_transit_route_limit> ] [ <max_v6_lpm_limit> ] [ <max_v6_lpm_65_to_127_limit> ] [ <used_lpm_total> ] <used_v4_lpm> <used_v6_lpm> [ <used_v6_lpm_128> ] <used_host_lpm_total> <used_host_v4_lpm> <used_host_v6_lpm> <used_mcast> <used_mcast6> [ <used_mcast_transit_routes> ] <used_mcast_oifl> <used_host_in_host_total> <used_host4_in_host> <used_host6_in_host> <max_ecmp_table_limit> <used_ecmp_table> <max_ecmp_nh_table_limit> <used_ecmp_nh_table> [ <mfib_fd_status> ] [ <mfib_fd_maxroute> ] [ <mfib_fd_count> ] [ <lpm_to_host_migrate_table> ] [ <host_to_lpm_migrate_table> ] } ]

- OLD: show hardware qos eoq stats-class [ module <module> ] [ __readonly__ TABLE_qos_eoq_stats_class <module> <eoq-stats-class-desc> ]

- NEW: show hardware qos eoq stats-class [ module <module> ] [ __readonly__ TABLE_qos_eoq_stats_class [ <module> ] <eoq-stats-class-desc> ]

- OLD: show hardware qos ing-pg-no-min [ module <module> ] [ __readonly__ TABLE_qos_ing_pg_no_min <module> ]

- NEW: show hardware qos ing-pg-no-min [ module <module> ] [ __readonly__ TABLE_qos_ing_pg_no_min [ <module> ] <ingress_pg_min> <pg_min_value> ]

- OLD: show hardware qos min-buffer [ module <module> ] [ __readonly__ TABLE_qos_min_buffer_profile <module> <buff-prof-desc> ]

- NEW: show hardware qos min-buffer [ module <module> ] [ __readonly__ TABLE_qos_min_buffer_profile [ <module> ] <buff-prof-desc> ]

- OLD: show install { inactive | active [ brief ] | committed } [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> ] [ TABLE_base_package_list <base_package_id> ] } ]

- NEW: show install { inactive | active [ brief ] | committed } [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> + ] [ TABLE_base_package_list <base_package_id> + ] } ]

- OLD: show ip arp vpc-statistics [ __readonly__ { TABLE_arp_vpc_stats [ <arp-pro-drp-pull-disable> ] [ <arp-pro-drp-push-msg-disable> ] [ <arp-pro-ign-snd-pull-disabe> ] [ <arp-ign-snd-push-disable> ] [ <arp-drp-im-fail> ] [ <arp-drp-mcecm-fail> ] [ <arp-drp-invalid-pc-iod> ] [ <arp-drp-pt-lookup-fail> ] [ <arp-drp-resp-fail-no-mct> ] [ <arp-drp-resp-fail> ] [ <arp-mcecm-ifidx-vpc-fail> ] [ <arp-mcecm-vpc-ifidx-fail> ] [ <arp-periodic-mcecm-ifidx-vpc-fail> ] [ <arp-resp-sent> ] [ <arp-resp-recvd> ] [ <arp-resp-recv-err> ] [ <arp-rcvd-msg> ] [ <arp-send-fail> ] [ <arp-cfs-rel-dlvry-fail> ] [ <arp-cfs-rel-dnvry-suc> ] [ <arp-drp-pt-add-fail> ] [ <arp-drp-no-mem> ] [ <arp-drp-tmr-cre-fail> ] [ <arp-drp-add-adj-fail> ] [ <arp-off-drp-pt-lookup-fail> ] [ <arp-dont-drp-vlan-mismat> ] [ <arp-drp-svi-invalid> ] [ <arp-dont-drop-sv-down> ] [ <arp-drp-mct-down> ] [ <arp-drp-ctxt-invalid> ] [ <arp-drp-vrf-invalid> ] [ <arp-drp-l3addr-invalid> ] [ <arp-drp-l3addr-sanity-fail> ] [ <arp-drp-mac-sanity-fail> ] [ <arp-own-rtr-mac> ] [ <arp-drp-own-ipaddr> ] [ <arp-drp-own-vipadd> ] [ <arp-drp-adj-fail> ] [ <arp-drp-subnet-mismatch> ] [ <arp-drp-adj-exist> ] [ <arp-dont-drp-ip-not-enable> ] [ <arp-drp-total-cnt> ] [ <arp-dont-drop-total-cnt> ] [ <arp-drp-inval-phy-iod> ] [ <arp-add-adj> ] [ <arp-del-adj> ] [ <arp-adj-already-exist> ] [ <arp-sync-recv-op-add-adj> ] [ <arp-sync-recv-op-del-adj> ] [ <arp-sync-push-msg-adj-cnt> ] [ <arp-sync-send-op-add-adj> ] [ <arp-sync-send-op-del-adj> ] [ <arp-sync-adj-cnt> ] [ <arp-sync-addadj-fail> ] [ <arp-sync-drp-svi-inv> ] [ <arp-sync-drp-svi-dwn> ] [ <arp-sync-drp-ctxt-inv> ] [ <arp-sync-null-adj> ] [ <arp-sync-invalid-ip> ] [ <arp-periodic-sync-adj-l2-supp-cnt> ] [ <arp-periodic-sync-stop-bcast-pkt-sync-count> ] } ]

- NEW: show ip arp vpc-statistics [ __readonly__ { TABLE_arp_vpc_stats [ <arp-pro-drp-pull-disable> ] [ <arp-pro-drp-push-msg-disable> ] [ <arp-pro-ign-snd-pull-disabe> ] [ <arp-ign-snd-push-disable> ] [ <arp-drp-im-fail> ] [ <arp-drp-mcecm-fail> ] [ <arp-drp-invalid-pc-iod> ] [ <arp-drp-pt-lookup-fail> ] [ <arp-drp-resp-fail-no-mct> ] [ <arp-drp-resp-fail> ] [ <arp-mcecm-ifidx-vpc-fail> ] [ <arp-mcecm-vpc-ifidx-fail> ] [ <arp-periodic-mcecm-ifidx-vpc-fail> ] [ <arp-resp-sent> ] [ <arp-resp-recvd> ] [ <arp-resp-recv-err> ] [ <arp-rcvd-msg> ] [ <arp-send-fail> ] [ <arp-cfs-rel-dlvry-fail> ] [ <arp-cfs-rel-dnvry-suc> ] [ <arp-pkt-vmct-drop-count> ] [ <arp-drp-pt-add-fail> ] [ <arp-drp-no-mem> ] [ <arp-drp-tmr-cre-fail> ] [ <arp-drp-add-adj-fail> ] [ <arp-off-drp-pt-lookup-fail> ] [ <arp-dont-drp-vlan-mismat> ] [ <arp-drp-svi-invalid> ] [ <arp-dont-drop-sv-down> ] [ <arp-drp-mct-down> ] [ <arp-drp-ctxt-invalid> ] [ <arp-drp-vrf-invalid> ] [ <arp-drp-l3addr-invalid> ] [ <arp-drp-l3addr-sanity-fail> ] [ <arp-drp-mac-sanity-fail> ] [ <arp-own-rtr-mac> ] [ <arp-drp-own-ipaddr> ] [ <arp-drp-own-vipadd> ] [ <arp-drp-adj-fail> ] [ <arp-drp-subnet-mismatch> ] [ <arp-drp-adj-exist> ] [ <arp-dont-drp-ip-not-enable> ] [ <arp-drp-total-cnt> ] [ <arp-dont-drop-total-cnt> ] [ <arp-drp-inval-phy-iod> ] [ <arp-add-adj> ] [ <arp-del-adj> ] [ <arp-adj-already-exist> ] [ <arp-sync-recv-op-add-adj> ] [ <arp-sync-recv-op-del-adj> ] [ <arp-sync-push-msg-adj-cnt> ] [ <arp-sync-send-op-add-adj> ] [ <arp-sync-send-op-del-adj> ] [ <arp-sync-adj-cnt> ] [ <arp-sync-addadj-fail> ] [ <arp-sync-drp-svi-inv> ] [ <arp-sync-drp-svi-dwn> ] [ <arp-sync-drp-ctxt-inv> ] [ <arp-sync-null-adj> ] [ <arp-sync-invalid-ip> ] [ <arp-periodic-sync-adj-l2-supp-cnt> ] [ <arp-periodic-sync-stop-bcast-pkt-sync-count> ] [ <arp-periodic-sync-vmct-stop-orphan-sync-count> ] } ]

- OLD: show ip pim config-sanity [ __readonly__ [ TABLE_vrf <out-context> [ TABLE_RP <rp-addr> [ { <rperr-count><rp-interface><rp-error> } ] ] [ TABLE_ANYCAST [ { <arperr-count> <anycastrp-addr> [ <arp-interface> ] <arp-error> [ <configure-as-RP> ] } ] [ TABLE_MEMBER [ { <memerr-count> [ <mem-interface> ] <mem-error> } ] ] <found> ] [ TABLE_BSR [ { <rp-cand-count> [ <rp-cand-interface> ] <rp-cand-error> } ] [ { <bsr-cand-count> [ <bsr-cand-interface> ] <bsr-cand-error> } ] ] [ TABLE_AUTORP [ { <rp-cand-count> [ <rp-cand-interface> ] <rp-cand-error> } ] [ { <auto-cand-count> [ <auto-cand-interface> ] <auto-cand-error> } ] ] ] ]

- NEW: show ip pim config-sanity [ __readonly__ [ TABLE_vrf [ <out-context> ] [ TABLE_RP [ <rp-addr> ] [ <rperr-count> ] [ <rp-interface> ] [ <rp-error> ] ] [ TABLE_ANYCAST [ <arperr-count> ] [ <anycastrp-addr> ] [ <arp-interface> ] [ <arp-error> ] [ <configure-as-RP> ] [ TABLE_MEMBER [ <memerr-count> ] [ <mem-interface> ] [ <mem-error> ] ] [ <found> ] ] [ TABLE_BSR [ <rp-cand-count> ] [ <rp-cand-interface> ] [ <rp-cand-error> ] [ <bsr-cand-count> ] [ <bsr-cand-interface> ] [ <bsr-cand-error> ] ] [ TABLE_AUTORP [ <rp-cand-count> ] [ <rp-cand-interface> ] [ <rp-cand-error> ] [ <auto-cand-count> ] [ <auto-cand-interface> ] [ <auto-cand-error> ] ] ] ]

- OLD: show ip sla responder [ __readonly__ <rttMonApplResponder> <gen-enabled> [ <ctrl-msg-count> ] [ <errors> ] [ { TABLE_recent [ <print-recent-hdr> ] [ <print-recent-err-hdr> ] [ <recent-addr> ] [ <recent-time> ] [ <recent-error> ] } ] <perm-enabled> [ { TABLE_permanent_udp [ <print-udp-hdr> ] [ <address> ] [ <port> ] } ] [ { TABLE_permanent_tcp [ <print-tcp-hdr> ] [ <address> ] [ <port> ] } ] ]

- NEW: show ip sla responder [ __readonly__ <rttMonApplResponder> <gen-enabled> [ <ctrl-msg-count> ] [ <errors> ] [ <print-recent-hdr> ] [ { TABLE_recent [ <recent-addr> ] [ <recent-time> ] } ] [ <print-recent-err-hdr> ] [ { TABLE_recent_error [ <recent-error> ] } ] <perm-enabled> [ { TABLE_permanent_udp [ <print-udp-hdr> ] [ <address> ] [ <port> ] } ] [ { TABLE_permanent_tcp [ <print-tcp-hdr> ] [ <address> ] [ <port> ] } ] ]

- OLD: show ip udp relay [ __readonly__ [ <udp_relay_service_enable> <udp_relay_hdr> TABLE_default_ports <port_name> <udp_relay_port_enable> ] [ <udp_ports_hdr> TABLE_ports <udp_port_num> ] [ <udp_intf_hdr> TABLE_intf <udp_intf_idx> <udp_sub_bcast> <udp_objgrp> ] ]

- NEW: show ip udp relay [ __readonly__ <udp_relay_service_enable> <udp_relay_hdr> [ { TABLE_default_ports <port_name> <udp_relay_port_enable> } ] <udp_ports_hdr> [ TABLE_ports <udp_port_num> ] <udp_intf_hdr> [ TABLE_intf <udp_intf_idx> <udp_sub_bcast> <udp_objgrp> ] ]

- OLD: show l2route evpn mac-ip evi <vpn-id> [ arp | bgp | hmm ] [ mac <mac_addr> ] [ host-ip { <ipv4_host> | <ipv6_host> } ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ detail ] [ __readonly__ TABLE_l2route_mac_ip_evi <topo-id> <mac-addr> <prod-type> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

- NEW: show l2route evpn mac-ip evi <vpn-id> [ arp | bgp | hmm ] [ mac <mac_addr> ] [ host-ip { <ipv4_host> | <ipv6_host> } ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ detail ] [ __readonly__ TABLE_l2route_mac_ip_evi <topo-id> <mac-addr> <host-ip> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

- OLD: show l2route { mac-ip | openflow mac-ip } { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_mac_ip_openflow <topo-id> <mac-addr> <prod-type> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

- NEW: show l2route { mac-ip | openflow mac-ip } { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_mac_ip <topo-id> <mac-addr> <host-ip> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

- OLD: show mac address-table limit [ __readonly__ <limit_str> <limit> ]

- NEW: show mac address-table limit { all | system | vlan | interface } [ __readonly__ <limit_str> <limit> ]

- OLD: show nbm host-policy applied receiver { local { all | interface { <if-name> } } | external }

- NEW: show nbm host-policy applied receiver { local { all | interface { <if-name> | wildcard } } | external }

- OLD: show nbm host-policy applied { sender { all | interface { <if-name> } } }

- NEW: show nbm host-policy applied { sender { all | interface { <if-name> | wildcard } } }

- OLD: show openflow switch <switch-id> flows [ [ table-id <table-id> ] [ [ pending | pending-del | controller | configured | default | fixed ] [ brief | list | summary ] ] | stats ]

- NEW: show openflow switch <switch-id> flows [ [ table-id <table-id> ] [ [ pending | pending-del | controller | configured | default | fixed ] [ brief | list | summary ] ] | stats | compare statistics { snapshot | report [ brief | list ] } ]

- OLD: show param-list [ param-list-name <plistname> ] [ show-instance ] [ __readonly__ <param_list_header_flag> <param_list_name> <param_list_var> <param_list_type> <param_instance_header_flag> <param_instance_name> <param_instance_var> <param_instance_val> ]

- NEW: show param-list [ param-list-name <plistname> ] [ show-instance ] [ __readonly__ TABLE_param_list <param_list_name> [ <param_list_var> ] [ <param_list_type> ] [ TABLE_instance <param_instance_name> [ <param_instance_var> ] [ <param_instance_val> ] ] ]

- OLD: show policy-map interface control-plane { [ module <slot-no-in> [ class <cmap-name> ] ] | [ class <cmap-name> [ module <slot-no-in> ] ] } [ __readonly__ [ <scale-factor-cmd> ] <pmap-name> [ TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> { [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] } + ] [ <class-off-rate> <class-drop-rate> <class-pkts> <class-bytes> ] [ [ <set_vld_flg> ] { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ { percent <cir-perc> } ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ { percent1 <pir-perc> } ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] ] [ TABLE_slot { <slot-no-out> { [ [ <conform-pkts> ] <conform-bytes> ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { [ [ <exceed-pkts> ] <exceed-bytes> ] { { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } } } ] { [ [ <violate-pkts> ] <violate-bytes> ] { { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } } } } } ] ] ]

- NEW: show policy-map interface control-plane { [ module <slot-no-in> [ class <cmap-name> ] ] | [ class <cmap-name> [ module <slot-no-in> ] ] } [ __readonly__ [ <scale-factor-cmd> ] <pmap-name> [ TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> { [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] } + ] [ <class-off-rate> <class-drop-rate> <class-pkts> <class-bytes> ] [ [ <set_vld_flg> ] { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ { percent <cir-perc> } ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ { percent1 <pir-perc> } ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] ] [ TABLE_slot { <slot-no-out> { [ [ <conform-pkts> ] | [ <conform-bytes> ] ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { [ [ <exceed-pkts> ] <exceed-bytes> ] { { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } } } ] { [ <violate-pkts> | <violate-bytes> ] { { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } } } } } ] ] ]

- OLD: show policy-map type control-plane [ expand ] [ { name <pmap-name> } ] [ __readonly__ [ { TABLE_pmap <pmap-name1> [ { TABLE_cmap <cmap-name> [ <opt_any_or_all> ] [ TABLE_match <match_key> { [ access_grp <acc_grp_name> ] | [ redirect <opt_match_redirect> ] | [ exception <opt_match_excpt> ] | [ protocol <opt_match_protocol> ] } ] [ { TABLE_set_action <set_vld_flg> { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ percent <cir-perc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ percent1 <pir-perc> ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } ] [ { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } ] ] } ] } ] ]

- NEW: show policy-map type control-plane [ expand ] [ { name <pmap-name> } ] [ __readonly__ [ { TABLE_pmap <pmap-name1> [ { TABLE_cmap <cmap-name> [ <opt_any_or_all> ] [ TABLE_match [ <match_key> ] { [ access_grp <acc_grp_name> + ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> + ] [ protocol <opt_match_protocol> ] } ] [ { TABLE_set_action <set_vld_flg> { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ percent <cir-perc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ percent1 <pir-perc> ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } ] [ { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } ] ] } ] } ] ]

- OLD: show port-channel load-balance { [ module <module> ] | { fex { all } } } [ __readonly__ [ <sys-cfg> ] [ { <module-cfg> } ] + <non-ip-val> <non-ip-sel> <ipv4-val> <ipv4-sel> [ <ipv6-val> ] { TABLE_mod_configs [ <mod-number> ] <mod-non-ip-val> <mod-non-ip-sel> <mod-ipv4-val> <mod-ipv4-sel> } ]

- NEW: show port-channel load-balance { [ module <module> ] | { fex { all } } } [ __readonly__ [ <sys-cfg> ] + <sys-cfg-sel> [ { <module-cfg> } ] + <non-ip-val> <non-ip-sel> <ipv4-val> <ipv4-sel> [ <ipv6-val> ] { TABLE_mod_configs [ <mod-number> ] <mod-non-ip-val> <mod-non-ip-sel> <mod-ipv4-val> <mod-ipv4-sel> } ]

- OLD: show postcard-telemetry exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> ]

- NEW: show postcard-telemetry exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> ]

- OLD: show postcard-telemetry flow-profile [ name ] [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <dscp> <age> <latency> ]

- NEW: show postcard-telemetry flow-profile [ name ] [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <age> <latency> ]

- OLD: show postcard-telemetry monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]

- NEW: show postcard-telemetry monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]

- OLD: show ptp packet-trace [ __readonly__ [ TABLE_ptp <intf-name> <sup-time> <pkt_dir> <pkt_type> <pkt_info> ] <ptp-header> <ptp-end> ]

- NEW: show ptp packet-trace [ __readonly__ <ptp-header> [ TABLE_ptp <intf-name> <sup-time> <pkt_dir> <pkt_type> <pkt_info> ] <ptp-end> ]

- OLD: show qos dcbxp incompatibility interface <iface-num> [ __readonly__ { <pfc> <mtu> <lpg> <rpg> <bw> <lfcoe> <rfcoe> <liscsi> <riscsi> } ]

- NEW: show qos dcbxp incompatibility interface <iface-num> [ __readonly__ { [ { TABLE_local_pfc <vl_id_lpfc> [ <lpfc> ] } ] [ { TABLE_remote_pfc <vl_id_rpfc> [ <rpfc> ] } ] [ <mtu> ] [ { TABLE_lpg <vl_id_lpg> [ <cos_list_lpg> ] [ <bandwidth_lpg> ] } ] [ { TABLE_rpg <vl_id_rpg> [ <cos_list_rpg> ] [ <bandwidth_rpg> ] } ] [ <bw> ] [ <lfcoe> ] [ <rfcoe> ] [ <liscsi> ] [ <riscsi> ] } ]

- OLD: show route-map { <pbr_rmap_name> | <pbr_rmap_cfg_name> } pbr-statistics [ __readonly__ <tag> <action> <seq> <pbr_pkt_count> <dflt_rtg_pkt_count> ]

- NEW: show route-map { <pbr_rmap_name> | <pbr_rmap_cfg_name> } pbr-statistics [ __readonly__ TABLE_rmap { TABLE_pbr <tag> <action> <seq> <pbr_pkt_count> } <dflt_rtg_pkt_count> ]

- OLD: show snmp user [ <s0> [ engineID <s1> ] ] [ __readonly__ [ { TABLE_snmp_users <user> <auth> <priv> [ { TABLE_groups <group> } ] [ <acl_filter> ] [ <engineID> ] } ] ]

- NEW: show snmp user [ <s0> [ engineID <s1> ] ] [ __readonly__ [ { TABLE_snmp_users <user> <auth> <priv> [ <group> ] + [ <acl_filter> ] [ <engineID> ] } ] ]

- OLD: show srte policy fh

- NEW: show srte policy fh [ __readonly__ [ TABLE_fh [ <label> <type> <state> ] [ TABLE_index [ <index> <ip_addr> <mask_len> ] ] ] ]

- OLD: show sup-monitor drops session <session_number> [ module <module> ]

- NEW: show sup-monitor drops session <session_number> [ __readonly__ [ <drops> ] [ <inactive> ] ]

- OLD: show switching-mode fabric-speed [ __readonly__ TABLE_switching_mode <switching-mode-desc> ]

- NEW: show switching-mode fabric-speed [ __readonly__ TABLE_switching_mode_fabric_speed <fabric-speed-desc> ]

- OLD: show system image-verification

- NEW: show system image-verification [ __readonly__ { [ TABLE_system_image_verification <Str1> ] } ]

- OLD: show system inband queuing status [ __readonly__ [ { TABLE_sys_inband_queue_status <pminbandweigh0> <pminbandweigh1> <pminbandweigh2> } ] ]

- NEW: show system inband queuing status [ __readonly__ [ { TABLE_sys_inband_queue_status <pminbandalgo> <pminbandweigh0> <pminbandweigh1> <pminbandweigh2> } ] ]

- OLD: show system poap

- NEW: show system poap [ __readonly__ { [ TABLE_show_system_poap <Str1> ] } ]

- OLD: show tech-support forwarding l3 unicast [ module <module> ]

- NEW: show tech-support forwarding l3 unicast [ module <module> ] [ list ]

- OLD: show tech-support forwarding l3 unicast detail [ module <module> ]

- NEW: show tech-support forwarding l3 unicast detail [ module <module> ] [ list ]

- OLD: show vlan filter [ access-map <name> | vlan <vlan> ] [ __readonly__ TABLE_vlan_filter <name> <configured_vlans> ]

- NEW: show vlan filter [ access-map <name> | vlan <vlan> ] [ __readonly__ TABLE_vlan_filter <vacl_name> <configured_vlans> ]

- OLD: show vpc [ brief ] [ __readonly__ <vpc-domain-id> [ <vpc-l2mp-switch-id> ] <vpc-peer-status> <vpc-peer-status-reason> <vpc-peer-keepalive-status> [ <vpc-peer-l2mp-status> ] <vpc-peer-consistency> { [ <vpc-peer-consistency-reason> ] [ <vpc-per-vlan-peer-consistency> ] <vpc-peer-consistency-status> } <vpc-type-2-consistency> { [ <vpc-type-2-consistency-reason> ] <vpc-type-2-consistency-status> } <vpc-role> <num-of-vpcs> [ <track-obj> ] [ <peer-gateway> ] [ <peer-gateway-excluded-vlans> ] <dual-active-excluded-vlans> <vpc-graceful-consistency-check-status> [ <vpc-auto-recovery-status> ] [ <vpc-delay-restore-status> ] [ <vpc-delay-restore-svi-status> ] [ <vpc-delay-peer-link-status> ] <operational-l3-peer> [ <vpc-scale-high-status> ] [ <fp-enhanced-load-balancing> ] [ <vpc-per-vlan-peer-consistency> ] <vpc-peer-link-hdr> [ { TABLE_peerlink <peer-link-id> <peerlink-ifindex> <peer-link-port-state> <peer-up-vlan-bitset> } ] <vpc-end> <vpc-hdr> [ <vpc-is-es> ] [ <vpc-not-es> ] [ { TABLE_vpc <vpc-id> <vpc-ifindex> <vpc-port-state> <phy-port-if-removed><vpc-thru-peerlink> <vpc-consistency> { [ <vpc-consistency-reason> ] [ <vpc-consistency-status> ] } <up-vlan-bitset> <es-attr> } ] <vpc-end> ]

- NEW: show vpc [ brief ] [ __readonly__ <vpc-domain-id> [ <vpc-l2mp-switch-id> ] <vpc-peer-status> <vpc-peer-status-reason> <vpc-peer-keepalive-status> [ <vpc-peer-l2mp-status> ] <vpc-peer-consistency> { [ <vpc-peer-consistency-reason> ] [ <vpc-per-vlan-peer-consistency> ] <vpc-peer-consistency-status> } <vpc-type-2-consistency> { [ <vpc-type-2-consistency-reason> ] <vpc-type-2-consistency-status> } <vpc-role> <num-of-vpcs> [ <track-obj> ] [ <peer-gateway> ] [ <peer-gateway-excluded-vlans> ] <dual-active-excluded-vlans> <vpc-graceful-consistency-check-status> [ <vpc-auto-recovery-status> ] [ <vpc-delay-restore-status> ] [ <vpc-delay-restore-svi-status> ] [ <vpc-delay-peer-link-status> ] <operational-l3-peer> [ <vpc-scale-high-status> ] [ <fp-enhanced-load-balancing> ] [ <vpc-per-vlan-peer-consistency> ] [ <virtual-peerlink> ] <vpc-peer-link-hdr> [ { TABLE_peerlink <peer-link-id> <peerlink-ifindex> <peer-link-port-state> <peer-up-vlan-bitset> } ] <vpc-end> <vpc-hdr> [ <vpc-is-es> ] [ <vpc-not-es> ] [ { TABLE_vpc <vpc-id> <vpc-ifindex> <vpc-port-state> <phy-port-if-removed><vpc-thru-peerlink> <vpc-consistency> { [ <vpc-consistency-reason> ] [ <vpc-consistency-status> ] } <up-vlan-bitset> <es-attr> } ] <vpc-end> ]

Chapter 27. New, Changed, and Deprecated Show Commands in Cisco Nexus 9000 Release 9.2(4)

- New Commands

- Changed Commands

- Deprecated Commands

New Commands

The following commands are added in this release.

- show cdp traffic interface2 all [ __readonly__ TABLE_cdp_traffic <intf_id> <total_input_packets> <valid_cdp_packets> <input_v1_packets> <input_v2_packets> <invalid_cdp_packets> <unsupported_version> <checksum_errors> <malformed_packets> <total_output_packets> <output_v1_packets> <output_v2_packets> <send_errors> <flap_cnt> ]

- show lldp traffic interface all [ __readonly__ TABLE_lldp_traffic_interface <interface> <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> <flap_cnt> ]

- show logging level ngmvpn

- show system internal icam event-history thresholds

- show system resources all-modules [ __readonly__ { [ <load_avg_1min> ] [ <load_avg_5min> ] [ <load_avg_15min> ] [ <processes_total> ] [ <processes_running> ] [ <cpu_state_user> ] [ <cpu_state_kernel> ] [ <cpu_state_idle> ] [ TABLE_cpu_usage <cpuid> <user> <kernel> <idle> ] [ <memory_usage_total> ] [ <memory_usage_used> ] [ <memory_usage_free> ] [ <current_memory_status> ] } ]

Changed Commands

The following commands are changed in this release.

- OLD: show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ multihop ] | [ module <module> ] | [ interface <intf_id> ] | [ application <bfd_cli_client_names> ] | [ { src-ip <src_ip> | src-ipv6 <src_ipv6> } ] | [ { dest-ip <dest_ip> | dest-ipv6 <dest_ipv6> } ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ details ] [ __readonly__ TABLE_bfdNeighbor <local_disc> [ <header> ] [ <sess_type> ] [ <vrf_name> ] [ <src_ip_addr> ] [ <src_ipv6_addr> ] [ <dest_ip_addr> ] [ <dest_ipv6_addr> ] [ <remote_disc> ] [ <local_state> ] [ <remote_state> ] [ <holddown> ] [ <cur_detect_mult> ] [ <intf> ] [ <echo> ] [ <echo_tx> ] [ <local_diag> ] [ <demand> ] [ <poll> ] [ <min_tx> ] [ <min_rx> ] [ <local_multi> ] [ <detect_timer> ] [ <down_count> ] [ <tx_interval> ] [ <rx_count> ] [ <rx_avg> ] [ <rx_min> ] [ <rx_max> ] [ <last_rx> ] [ <tx_count> ] [ <tx_avg> ] [ <tx_min> ] [ <tx_max> ] [ <last_tx> ] [ <app> ] [ <up_time> ] [ <version> ] [ <diag> ] [ <state_bit> ] [ <demand_bit> ] [ <poll_bit> ] [ <final_bit> ] [ <multiplier> ] [ <length> ] [ <my_disc> ] [ <your_disc> ] [ <min_tx_interval> ] [ <req_min_rx> ] [ <min_echo_interval> ] [ <out_str> ] [ <host_lc> ] [ <down_reason> ] [ <no_host_reason> ] [ <parent> ] [ <per_link_str> ] [ <auth> ] [ <auth_bit> ] [ <print_details> ] ]

- NEW: show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ multihop ] | [ module <module> ] | [ interface <intf_id> ] | [ application <bfd_cli_client_names> ] | [ { src-ip <src_ip> | src-ipv6 <src_ipv6> } ] | [ { dest-ip <dest_ip> | dest-ipv6 <dest_ipv6> } ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ details ] [ __readonly__ TABLE_bfdNeighbor <local_disc> [ <header> ] [ <sess_type> ] [ <vrf_name> ] [ <src_ip_addr> ] [ <src_ipv6_addr> ] [ <dest_ip_addr> ] [ <dest_ipv6_addr> ] [ <remote_disc> ] [ <local_state> ] [ <remote_state> ] [ <holddown> ] [ <cur_detect_mult> ] [ <intf> ] [ <echo> ] [ <echo_tx> ] [ <local_diag> ] [ <demand> ] [ <poll> ] [ <min_tx> ] [ <min_rx> ] [ <local_multi> ] [ <detect_timer> ] [ <tx_interval> ] [ <rx_count> ] [ <rx_avg> ] [ <rx_min> ] [ <rx_max> ] [ <last_rx> ] [ <tx_count> ] [ <tx_avg> ] [ <tx_min> ] [ <tx_max> ] [ <last_tx> ] [ <app> ] [ <up_time> ] [ <up_count> ] [ <down_count> ] [ <version> ] [ <diag> ] [ <state_bit> ] [ <demand_bit> ] [ <poll_bit> ] [ <final_bit> ] [ <multiplier> ] [ <length> ] [ <my_disc> ] [ <your_disc> ] [ <min_tx_interval> ] [ <req_min_rx> ] [ <min_echo_interval> ] [ <out_str> ] [ <host_lc> ] [ <down_reason> ] [ <no_host_reason> ] [ <parent> ] [ <per_link_str> ] [ <auth> ] [ <auth_bit> ] [ <print_details> ] ]

- OLD: show cdp traffic interface2 <if2> [ __readonly__ <intf_id> <total_input_packets> <valid_cdp_packets> <input_v1_packets> <input_v2_packets> <invalid_cdp_packets> <unsupported_version> <checksum_errors> <malformed_packets> <total_output_packets> <output_v1_packets> <output_v2_packets> <send_errors> ]

- NEW: show cdp traffic interface2 <if2> [ __readonly__ <intf_id> <total_input_packets> <valid_cdp_packets> <input_v1_packets> <input_v2_packets> <invalid_cdp_packets> <unsupported_version> <checksum_errors> <malformed_packets> <total_output_packets> <output_v1_packets> <output_v2_packets> <send_errors> <flap_cnt> ]

- OLD: show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding [ ip | ipv4 ] [ unicast ] inconsistency [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> ]

- NEW: show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding [ ip | ipv4 ] [ unicast ] inconsistency [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> ]

- OLD: show consistency-checker forwarding ipv6 [ unicast ] [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding ipv6 [ unicast ] inconsistency [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> ]

- NEW: show consistency-checker forwarding ipv6 [ unicast ] [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding ipv6 [ unicast ] inconsistency [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ TABLE_inconsistency <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> ]

- OLD: show hardware internal buffer info tah-pkt-stats [ input ] [ module <module> ] [ instance <instance> ] [ port <port> ] [ subport <subport> ] [ brief | detail | peak ] [ __readonly__ { TABLE_ingress_buf <instance> <inst_total_cell> <inst_used_cell> <inst_free_cell> { TABLE_ingress_buf_per_inst <port> <subport> <qos0_instant_usage> <qos1_instant_usage> <qos2_instant_usage> <qos3_instant_usage> <qos4_instant_usage> <qos5_instant_usage> <qos6_instant_usage> <qos7_instant_usage> <port_instant_usage> <port_remain_usage> <port_peak_usage> <port_peak_usage2> } { TABLE_ingress_buf_stg2 <port_stg2> <hi_drop_usage> <lo_drop_usage> <hi_pause_usage> <lo_pause_usage> <port_instant_stg2> <port_remain_stg2> <port_peak_usage_stg2> <port_peak_usage2_stg2> } } { TABLE_instance <instance> <supports_8q> <total_instant_usage_drop_pg> <rem_instant_usage_drop_pg> <max_cell_usage_drop_pg> <switch_cell_count_drop_pg> <total_instant_usage_no_drop_pg> <rem_instant_usage_no_drop_pg> <max_cell_usage_no_drop_pg> <switch_cell_count_no_drop_pg> <total_instant_usage_cpu_pg> <rem_instant_usage_cpu_pg> <max_cell_usage_cpu_pg> <switch_cell_count_cpu_pg> <total_instant_usage_lcpu_pg> <rem_instant_usage_lcpu_pg> <max_cell_usage_lcpu_pg> <switch_cell_count_lcpu_pg> <total_instant_usage_rcpu_pg> <rem_instant_usage_rcpu_pg> <max_cell_usage_rcpu_pg> <switch_cell_count_rcpu_pg> <total_instant_usage_span_pg> <rem_instant_usage_span_pg> <max_cell_usage_span_pg> <switch_cell_count_span_pg> <total_instant_desc_usage_drop_pg> <rem_instant_desc_usage_drop_pg> <switch_desc_count_drop_pg> <total_instant_desc_usage_no_drop_pg> <rem_instant_desc_usage_no_drop_pg> <switch_desc_count_no_drop_pg> <total_instant_desc_usage_cpu_pg> <rem_instant_desc_usage_cpu_pg> <switch_desc_count_cpu_pg> <total_instant_desc_usage_lcpu_pg> <rem_instant_desc_usage_lcpu_pg> <switch_desc_count_lcpu_pg> <total_instant_desc_usage_rcpu_pg> <rem_instant_desc_usage_rcpu_pg> <switch_desc_count_rcpu_pg> <total_instant_desc_usage_span_pg> <rem_instant_desc_usage_span_pg> <switch_desc_count_span_pg> <ucpool_instant_usage_0> <ucpool_instant_desc_usage_0> <ucpool_max_cell_usage_0> <ucpool_instant_usage_1> <ucpool_instant_desc_usage_1> <ucpool_max_cell_usage_1> <ucpool_instant_usage_2> <ucpool_instant_desc_usage_2> <ucpool_max_cell_usage_2> <ucpool_instant_usage_3> <ucpool_instant_desc_usage_3> <ucpool_max_cell_usage_3> <ucpool_instant_usage_4> <ucpool_instant_desc_usage_4> <ucpool_max_cell_usage_4> <ucpool_instant_usage_5> <ucpool_instant_desc_usage_5> <ucpool_max_cell_usage_5> <ucpool_instant_usage_6> <ucpool_instant_desc_usage_6> <ucpool_max_cell_usage_6> <ucpool_instant_usage_7> <ucpool_instant_desc_usage_7> <ucpool_max_cell_usage_7> <mcpool_instant_usage_0> <mcpool_instant_desc_usage_0> <mcpool_instant_inq_usage_0> <mcpool_instant_pkts_usage_0> <mcpool_max_cell_usage_0> <mcpool_instant_usage_1> <mcpool_instant_desc_usage_1> <mcpool_instant_inq_usage_1> <mcpool_instant_pkts_usage_1> <mcpool_max_cell_usage_1> <mcpool_instant_usage_2> <mcpool_instant_desc_usage_2> <mcpool_instant_inq_usage_2> <mcpool_instant_pkts_usage_2> <mcpool_max_cell_usage_2> <mcpool_instant_usage_3> <mcpool_instant_desc_usage_3> <mcpool_instant_inq_usage_3> <mcpool_instant_pkts_usage_3> <mcpool_max_cell_usage_3> <mcpool_instant_usage_4> <mcpool_instant_desc_usage_4> <mcpool_instant_inq_usage_4> <mcpool_instant_pkts_usage_4> <mcpool_max_cell_usage_4> <mcpool_instant_usage_5> <mcpool_instant_desc_usage_5> <mcpool_instant_inq_usage_5> <mcpool_instant_pkts_usage_5> <mcpool_max_cell_usage_5> <mcpool_instant_usage_6> <mcpool_instant_desc_usage_6> <mcpool_instant_inq_usage_6> <mcpool_instant_pkts_usage_6> <mcpool_max_cell_usage_6> <mcpool_instant_usage_7> <mcpool_instant_desc_usage_7> <mcpool_instant_inq_usage_7> <mcpool_instant_pkts_usage_7> <mcpool_max_cell_usage_7> { TABLE_detail <egr_port> <port_uc_cells_q0> <port_mc_cells_q0> <port_mc_desc_q0> <port_uc_cells_q1> <port_mc_cells_q1> <port_mc_desc_q1> <port_uc_cells_q2> <port_mc_cells_q2> <port_mc_desc_q2> <port_uc_cells_q3> <port_mc_cells_q3> <port_mc_desc_q3> <port_uc_cells_q4> <port_mc_cells_q4> <port_mc_desc_q4> <port_uc_cells_q5> <port_mc_cells_q5> <port_mc_desc_q5> <port_uc_cells_q6> <port_mc_cells_q6> <port_mc_desc_q6> <port_uc_cells_q7> <port_mc_cells_q7> <port_mc_desc_q7> } { TABLE_peak <peak_drop_pg> <peak_no_drop_pg> <peak_mc_pool_0> <peak_mc_pool_1> <peak_mc_pool_2> <peak_mc_pool_3> <peak_mc_pool_4> <peak_mc_pool_5> <peak_mc_pool_6> <peak_mc_pool_7> <peak_uc_pool_0> <peak_uc_pool_1> <peak_uc_pool_2> <peak_uc_pool_3> <peak_uc_pool_4> <peak_uc_pool_5> <peak_uc_pool_6> <peak_uc_pool_7> <oport> <count_0> <count_1> } } ]

- NEW: show hardware internal buffer info tah-pkt-stats [ input ] [ module <module> ] [ instance <instance> ] [ port <port> ] [ subport <subport> ] [ brief | detail | peak | threshold ] [ __readonly__ { TABLE_ingress_buf <instance> <inst_total_cell> <inst_used_cell> <inst_free_cell> { TABLE_ingress_buf_per_inst <port> <subport> <qos0_instant_usage> <qos1_instant_usage> <qos2_instant_usage> <qos3_instant_usage> <qos4_instant_usage> <qos5_instant_usage> <qos6_instant_usage> <qos7_instant_usage> <port_instant_usage> <port_remain_usage> <port_peak_usage> <port_peak_usage2> } { TABLE_ingress_buf_stg2 <port_stg2> <hi_drop_usage> <lo_drop_usage> <hi_pause_usage> <lo_pause_usage> <port_instant_stg2> <port_remain_stg2> <port_peak_usage_stg2> <port_peak_usage2_stg2> } } { TABLE_instance <instance> <supports_8q> <total_instant_usage_drop_pg> <rem_instant_usage_drop_pg> <max_cell_usage_drop_pg> <switch_cell_count_drop_pg> <total_instant_usage_no_drop_pg> <rem_instant_usage_no_drop_pg> <max_cell_usage_no_drop_pg> <switch_cell_count_no_drop_pg> <total_instant_usage_cpu_pg> <rem_instant_usage_cpu_pg> <max_cell_usage_cpu_pg> <switch_cell_count_cpu_pg> <total_instant_usage_lcpu_pg> <rem_instant_usage_lcpu_pg> <max_cell_usage_lcpu_pg> <switch_cell_count_lcpu_pg> <total_instant_usage_rcpu_pg> <rem_instant_usage_rcpu_pg> <max_cell_usage_rcpu_pg> <switch_cell_count_rcpu_pg> <total_instant_usage_span_pg> <rem_instant_usage_span_pg> <max_cell_usage_span_pg> <switch_cell_count_span_pg> <total_instant_desc_usage_drop_pg> <rem_instant_desc_usage_drop_pg> <switch_desc_count_drop_pg> <total_instant_desc_usage_no_drop_pg> <rem_instant_desc_usage_no_drop_pg> <switch_desc_count_no_drop_pg> <total_instant_desc_usage_cpu_pg> <rem_instant_desc_usage_cpu_pg> <switch_desc_count_cpu_pg> <total_instant_desc_usage_lcpu_pg> <rem_instant_desc_usage_lcpu_pg> <switch_desc_count_lcpu_pg> <total_instant_desc_usage_rcpu_pg> <rem_instant_desc_usage_rcpu_pg> <switch_desc_count_rcpu_pg> <total_instant_desc_usage_span_pg> <rem_instant_desc_usage_span_pg> <switch_desc_count_span_pg> <ucpool_instant_usage_0> <ucpool_instant_desc_usage_0> <ucpool_max_cell_usage_0> <ucpool_instant_usage_1> <ucpool_instant_desc_usage_1> <ucpool_max_cell_usage_1> <ucpool_instant_usage_2> <ucpool_instant_desc_usage_2> <ucpool_max_cell_usage_2> <ucpool_instant_usage_3> <ucpool_instant_desc_usage_3> <ucpool_max_cell_usage_3> <ucpool_instant_usage_4> <ucpool_instant_desc_usage_4> <ucpool_max_cell_usage_4> <ucpool_instant_usage_5> <ucpool_instant_desc_usage_5> <ucpool_max_cell_usage_5> <ucpool_instant_usage_6> <ucpool_instant_desc_usage_6> <ucpool_max_cell_usage_6> <ucpool_instant_usage_7> <ucpool_instant_desc_usage_7> <ucpool_max_cell_usage_7> <mcpool_instant_usage_0> <mcpool_instant_desc_usage_0> <mcpool_instant_inq_usage_0> <mcpool_instant_pkts_usage_0> <mcpool_max_cell_usage_0> <mcpool_instant_usage_1> <mcpool_instant_desc_usage_1> <mcpool_instant_inq_usage_1> <mcpool_instant_pkts_usage_1> <mcpool_max_cell_usage_1> <mcpool_instant_usage_2> <mcpool_instant_desc_usage_2> <mcpool_instant_inq_usage_2> <mcpool_instant_pkts_usage_2> <mcpool_max_cell_usage_2> <mcpool_instant_usage_3> <mcpool_instant_desc_usage_3> <mcpool_instant_inq_usage_3> <mcpool_instant_pkts_usage_3> <mcpool_max_cell_usage_3> <mcpool_instant_usage_4> <mcpool_instant_desc_usage_4> <mcpool_instant_inq_usage_4> <mcpool_instant_pkts_usage_4> <mcpool_max_cell_usage_4> <mcpool_instant_usage_5> <mcpool_instant_desc_usage_5> <mcpool_instant_inq_usage_5> <mcpool_instant_pkts_usage_5> <mcpool_max_cell_usage_5> <mcpool_instant_usage_6> <mcpool_instant_desc_usage_6> <mcpool_instant_inq_usage_6> <mcpool_instant_pkts_usage_6> <mcpool_max_cell_usage_6> <mcpool_instant_usage_7> <mcpool_instant_desc_usage_7> <mcpool_instant_inq_usage_7> <mcpool_instant_pkts_usage_7> <mcpool_max_cell_usage_7> { TABLE_detail <egr_port> <port_uc_cells_q0> <port_mc_cells_q0> <port_mc_desc_q0> <port_uc_cells_q1> <port_mc_cells_q1> <port_mc_desc_q1> <port_uc_cells_q2> <port_mc_cells_q2> <port_mc_desc_q2> <port_uc_cells_q3> <port_mc_cells_q3> <port_mc_desc_q3> <port_uc_cells_q4> <port_mc_cells_q4> <port_mc_desc_q4> <port_uc_cells_q5> <port_mc_cells_q5> <port_mc_desc_q5> <port_uc_cells_q6> <port_mc_cells_q6> <port_mc_desc_q6> <port_uc_cells_q7> <port_mc_cells_q7> <port_mc_desc_q7> } { TABLE_peak <peak_drop_pg> <peak_no_drop_pg> <peak_mc_pool_0> <peak_mc_pool_1> <peak_mc_pool_2> <peak_mc_pool_3> <peak_mc_pool_4> <peak_mc_pool_5> <peak_mc_pool_6> <peak_mc_pool_7> <peak_uc_pool_0> <peak_uc_pool_1> <peak_uc_pool_2> <peak_uc_pool_3> <peak_uc_pool_4> <peak_uc_pool_5> <peak_uc_pool_6> <peak_uc_pool_7> <oport> <count_0> <count_1> } } ]

- OLD: show hardware internal forwarding l2 table utilization [ instance { <instance_number> | all } ] [ no-header ] [ module <num> ] [ __readonly__ TABLE_l2_util_info <module> <instance> <total> <used> <mcast> <ucast> <lines> <lines_full> ]

- NEW: show hardware internal forwarding l2 table utilization [ instance { [ <instance_number> | all ] [ module<num> ] } | module1 { [ <num> | all1 ] [ instance1 <instance_number1> ] } ] [ no-header ] [ __readonly__ TABLE_l2_util_info <module> <instance> <total> <used> <mcast> <ucast> <lines> <lines_full> ]

- OLD: show icam prediction resource acl_tcam module <module> inst <inst> trend [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries1> <Free_Entries1> <Percent_Util1> <Feature_Entries2> <Free_Entries2> <Percent_Util2> <Feature_Entries3> <Free_Entries3> <Percent_Util3> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used1> <Free1> <Util1> <Used2> <Free2> <Util2> <Used3> <Free3> <Util3> } ] ]

- NEW: show icam prediction resource { acl_tcam | acl-tcam | fib_tcam | fib-tcam } module <module> inst <inst> <YYYY> <Month> <Date> <Time> [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries> <Free_Entries> <Percent_Util> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used> <Free> <Percent_Util> } ] [ { TABLE_PREDICTION_FIB_tcam <Class> <Used_Entries> <Max_Entries> <Percent_Util> } ] ]

- OLD: show icam prediction resource { acl_tcam | fib_tcam } module <module> inst <inst> <YYYY> <Month> <Date> <Time> [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries> <Free_Entries> <Percent_Util> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used> <Free> <Percent_Util> } ] [ { TABLE_PREDICTION_FIB_tcam <Class> <Used_Entries> <Max_Entries> <Percent_Util> } ] ]

- NEW: show icam prediction resource { acl_tcam | acl-tcam } mod <module> inst <inst> trend [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries1> <Free_Entries1> <Percent_Util1> <Feature_Entries2> <Free_Entries2> <Percent_Util2> <Feature_Entries3> <Free_Entries3> <Percent_Util3> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used1> <Free1> <Util1> <Used2> <Free2> <Util2> <Used3> <Free3> <Util3> } ] ]

- OLD: show icam prediction scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | total-vlans-x-ports | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } | { vxlan [ test ] } } ] <YYYY> <Month> <Date> <Time> [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] } ] } ] } ] ]

- NEW: show icam prediction scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | total-vlans-x-ports | vlans | infra { mac } | stp { mst-instance | mst-vport | rpvst-vport | rpvst-vlan | isolated-portvlan } | vlan { vlan-count } ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces | routing-forwarding { route-v4 | route-v6 | outgoing-interface } | igmp { group } | pim { neighbor } ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf | bfd { session } | bgp { neighbor } | eigrp { route | neighbor } | hsrp { mac } | arp { arp-count } | ipv6-nd { nd-count } | routing { host-route-v4 | host-route-v6 | lpm-route-v4 | lpm-route-v6 } | isis { adjacency | bfd-session | route } | ospf { neighbor | lsa | area } | vrf { vrf-count } | vrrp { grp-per-intf } | pbr { seq-per-policy | nh-per-policy | ace-v4 | ace-v6 | ace-v4v6 | intf } | vrrp3 { grp-per-intf | grp-dft-timer | grp-relax-timer | path-dft-timer | grp-and-path } ] } | { vxlan [ igmp { vlan | vtep | underlay-mcast-group } | fl { vni | underlay-mcast-group | total-mac | vtep | ir-peer | ir-vni | ir-mac | vlan-mapping-under-intf | vlan-mapping-in-switch | static-mac-to-vtep | vlan-logical-port-vp | vlan-per-fex-port | vni-for-vpc-gw | igmp-group } | bgp { vni | svi | vrf | underlay-mcast-group | vtep | mac | host-route-v4 | host-route-v6 | overlay-lpm-route-v4 | overlay-lpm-route-v6 | vlan-logical-port-vp | vlan-per-fex-port | igmp-group } | bgp-ir { vni | svi | vrf | vtep | mac | host-route-v4 | host-route-v6 | overlay-lpm-route-v4 | overlay-lpm-route-v6 | vlan-logical-port-vp | vlan-per-fex-port | igmp-group } ] } } ] <YYYY> <Month> <Date> <Time> [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] } ] } ] } ] ]

- OLD: show icam resource { acl_tcam | fib_tcam } module <module> inst <inst> [ history <num_intervals> ] [ __readonly__ <module> <instance> [ { TABLE_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_ingress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_egress_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_egress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ <mod> <inst> { TABLE_tcam_bank_utilization <Tcam_no> <Bank_no> [ { TABLE_tcam_bank_stats <Used> <Free> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_global_configs <Atomic_Update> <Bank_Chain_Mode> <Dynamic_Bank_Mapping> <LOU_Threshold_Value> } ] [ { TABLE_fib_resource <Class> [ { TABLE_fib_stats <Used_Entries> <Max_Entries> <Percent_Util> <Timestamp> } ] } ] ]

- NEW: show icam resource { acl_tcam | acl-tcam | fib_tcam | fib-tcam } module <module> inst <inst> [ history <num_intervals> ] [ __readonly__ <module> <instance> [ { TABLE_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_ingress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_egress_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_egress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ <mod> <inst> { TABLE_tcam_bank_utilization <Tcam_no> <Bank_no> [ { TABLE_tcam_bank_stats <Used> <Free> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_global_configs <Atomic_Update> <Bank_Chain_Mode> <Dynamic_Bank_Mapping> <LOU_Threshold_Value> } ] [ { TABLE_fib_resource <Class> [ { TABLE_fib_stats <Used_Entries> <Max_Entries> <Percent_Util> <Timestamp> } ] } ] ]

- OLD: show icam scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | total-vlans-x-ports | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } | { vxlan [ test ] } } ] [ history <num_intervals> | utilization | thresholds ] [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] [ <Thres_Exceeded> <Polled_TS> ] [ <Avg_Util> ] [ <Week_Util> <Week_TS> ] [ <Peak_Util> <Peak_TS> ] [ <Info_Thres_Exceed> <Info_Thres_Exceed_TS> <Warn_Thres_Exceed> <Warn_Thres_Exceed_TS> <Crit_Thres_Exceed> <Crit_Thres_Exceed_TS> ] } ] } ] } ] ]

- NEW: show icam scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | total-vlans-x-ports | vlans | infra { mac } | stp { mst-instance | mst-vport | rpvst-vport | rpvst-vlan | isolated-portvlan } | vlan { vlan-count } ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces | routing-forwarding { route-v4 | route-v6 | outgoing-interface } | igmp { group } | pim { neighbor } ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf | bfd { session } | bgp { neighbor } | eigrp { route | neighbor } | hsrp { mac } | arp { arp-count } | ipv6-nd { nd-count } | routing { host-route-v4 | host-route-v6 | lpm-route-v4 | lpm-route-v6 } | isis { adjacency | bfd-session | route } | ospf { neighbor | lsa | area } | vrf { vrf-count } | vrrp { grp-per-intf } | pbr { seq-per-policy | nh-per-policy | ace-v4 | ace-v6 | ace-v4v6 | intf } | vrrp3 { grp-per-intf | grp-dft-timer | grp-relax-timer | path-dft-timer | grp-and-path } ] } | { vxlan [ igmp { vlan | vtep | underlay-mcast-group } | fl { vni | underlay-mcast-group | total-mac | vtep | ir-peer | ir-vni | ir-mac | vlan-mapping-under-intf | vlan-mapping-in-switch | static-mac-to-vtep | vlan-logical-port-vp | vlan-per-fex-port | vni-for-vpc-gw | igmp-group } | bgp { vni | svi | vrf | underlay-mcast-group | vtep | mac | host-route-v4 | host-route-v6 | overlay-lpm-route-v4 | overlay-lpm-route-v6 | vlan-logical-port-vp | vlan-per-fex-port | igmp-group } | bgp-ir { vni | svi | vrf | vtep | mac | host-route-v4 | host-route-v6 | overlay-lpm-route-v4 | overlay-lpm-route-v6 | vlan-logical-port-vp | vlan-per-fex-port | igmp-group } ] } } ] [ history <num_intervals> [ sort { current-scale [ ascending | descending ] | polled-timestamp [ newest | oldest ] } ] | utilization | thresholds ] [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> [ <Instance> ] [ <Verified_Scale> <Config_Scale> ] [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] [ <Thres_Exceeded> <Polled_TS> ] [ <Avg_Util> ] [ <Week_Util> <Week_TS> ] [ <Peak_Util> <Peak_TS> ] [ <Info_Thres_Exceed> <Info_Thres_Exceed_TS> <Warn_Thres_Exceed> <Warn_Thres_Exceed_TS> <Crit_Thres_Exceed> <Crit_Thres_Exceed_TS> ] } ] } ] } ] ]

- OLD: show ip sla configuration [ <entry-num> ] [ __readonly__ { TABLE_configuration [ <index> ] [ <owner> ] [ <tag> ] [ <timeout> ] [ <oper-type> ] [ <dest-ip> ] [ <source-int> ] [ <source-ip> ] [ <dest-port> ] [ <source-port> ] [ <dns-source-port> ] [ <traffic-class> ] [ <tos> ] [ <dns-name-server> ] [ <flow-label> ] [ <data-pattern> ] [ <switch-id> ] [ <profile-id> ] [ <interface> ] [ <packet-size> ] [ <packet-interval> ] [ <num-packets> ] [ <codec-type> ] [ <codec-num-packets> ] [ <codec-packet-size> ] [ <codec-packet-interval> ] [ <codec-adv-factor> ] [ <verify-data> ] [ <precision> ] [ <packet-priority> ] [ <ntp-sync-tolerance> ] [ <ntp-sync-toltype> ] [ <vrf-name> ] [ <control-enabled> ] [ <http-oper> ] [ <http-version> ] [ <url> ] [ <proxy> ] [ <raw-strings> ] [ <cache-control> ] [ <http-vrf-name> ] [ <http-owner> ] [ <http-tag> ] [ <http-timeout> ] [ <frequency> ] [ <secondary-freq-timeout> ] [ <secondary-freq-loss> ] [ <next-start-time> ] [ <group-scheduled> ] [ <randomly-scheduled> ] [ <low-frequency> ] [ <high-frequency> ] [ <life> ] [ <ageout> ] [ <recurring> ] [ <status-of-entry> ] [ <threshold> ] [ <hours> ] [ <buckets> ] [ <interval> ] [ <einterval> ] [ <ebuckets> ] [ <lives> ] [ <hsbuckets> ] [ <filter> ] } ]

- NEW: show ip sla configuration [ <entry-num> ] [ __readonly__ { TABLE_configuration [ <index> ] [ <owner> ] [ <tag> ] [ <timeout> ] [ <oper-type> ] [ <dest-ip> ] [ <source-int> ] [ <source-ip> ] [ <dest-port> ] [ <source-port> ] [ <dns-source-port> ] [ <traffic-class> ] [ <tos> ] [ <dns-name-server> ] [ <flow-label> ] [ <switch-id> ] [ <profile-id> ] [ <interface> ] [ <packet-size> ] [ <packet-interval> ] [ <num-packets> ] [ <codec-type> ] [ <codec-num-packets> ] [ <codec-packet-size> ] [ <codec-packet-interval> ] [ <codec-adv-factor> ] [ <verify-data> ] [ <data-pattern> ] [ <precision> ] [ <packet-priority> ] [ <ntp-sync-tolerance> ] [ <ntp-sync-toltype> ] [ <vrf-name> ] [ <control-enabled> ] [ <http-oper> ] [ <http-version> ] [ <url> ] [ <proxy> ] [ <raw-strings> ] [ <cache-control> ] [ <http-vrf-name> ] [ <http-owner> ] [ <http-tag> ] [ <http-timeout> ] [ <frequency> ] [ <secondary-freq-timeout> ] [ <secondary-freq-loss> ] [ <next-start-time> ] [ <group-scheduled> ] [ <randomly-scheduled> ] [ <low-frequency> ] [ <high-frequency> ] [ <life> ] [ <ageout> ] [ <recurring> ] [ <status-of-entry> ] [ <threshold> ] [ <hours> ] [ <buckets> ] [ <interval> ] [ <einterval> ] [ <ebuckets> ] [ <lives> ] [ <hsbuckets> ] [ <filter> ] } ]

- OLD: show ipv6 pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <uptime> ] [ <reg-sent> ] [ <reg-rcvd> ] [ <null-reg-sent> ] [ <null-reg-rcvd> ] [ <reg-stop-sent> ] [ <reg-stop-rcvd> ] [ <reg-rcvd-not-rp> ] [ <reg-rcvd-for-ssm> ] [ <reg-rcvd-for-bidir> ] [ <bootstrap-sent> ] [ <bootstrap-rcvd> ] [ <cand-rp-sent> ] [ <cand-rp-rcvd> ] [ <bs-no-nbr> ] [ <bs-border-deny> ] [ <bs-len-errors> ] [ <bs-rpf-failed> ] [ <bs-no-listen> ] [ <candrp-border-deny> ] [ <candrp-no-listen> ] [ <ctrl-no-route> ] [ <data-no-route> ] [ <no-state> ] [ <create-state> ] ]

- NEW: show ipv6 pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_context [ <out-context> ] [ <uptime> ] [ <reg-sent> ] [ <reg-rcvd> ] [ <null-reg-sent> ] [ <null-reg-rcvd> ] [ <reg-stop-sent> ] [ <reg-stop-rcvd> ] [ <reg-rcvd-not-rp> ] [ <reg-rcvd-for-ssm> ] [ <reg-rcvd-for-bidir> ] [ <bootstrap-sent> ] [ <bootstrap-rcvd> ] [ <cand-rp-sent> ] [ <cand-rp-rcvd> ] [ <bs-no-nbr> ] [ <bs-border-deny> ] [ <bs-len-errors> ] [ <bs-rpf-failed> ] [ <bs-no-listen> ] [ <candrp-border-deny> ] [ <candrp-no-listen> ] [ <ctrl-no-route> ] [ <data-no-route> ] [ <no-state> ] [ <create-state> ] ] ]

- OLD: show ipv6 pim vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ detail ] [ __readonly__ TABLE_context [ <out-context> ] [ <context-id> ] [ <count> ] [ <table-id> ] ]

- NEW: show ipv6 pim vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ detail ] [ __readonly__ [ TABLE_context [ <out-context> ] [ <context-id> ] [ <count> ] [ <bfd-enabled> ] [ <table-id> ] [ <state-limit> ] [ <available-states> ] [ <reserved-limit> ] [ <available-reserved> ] [ <reserve-policy> ] [ <register-rate-limit-pps> ] [ <shared-tree-route-map> ] [ TABLE_RANGE [ <shared-tree-ranges> ] ] ] ]

- OLD: show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> ] [ mbuf-priority ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <traffic-if-out> [ <traffic-if-name-out> ] <traffic-lan-iih-out> <traffic-lan-iih-rcv-out> <traffic-lan-iih-xmit-out> <traffic-lan-iih-rcv-auth-err-out> <traffic-lan-iih-rcv-err-out> <traffic-p2p-iih-out> <traffic-p2p-iih-rcv-out> <traffic-p2p-iih-xmit-out> <traffic-p2p-iih-rcv-auth-err-out> <traffic-p2p-iih-rcv-err-out> <traffic-csnp-out> <traffic-csnp-rcv-out> <traffic-csnp-xmit-out> <traffic-csnp-rcv-auth-err-out> <traffic-csnp-rcv-err-out> <traffic-psnp-out> <traffic-psnp-rcv-out> <traffic-psnp-xmit-out> <traffic-psnp-rcv-auth-err-out> <traffic-psnp-rcv-err-out> <traffic-lsp-out> <traffic-lsp-rcv-out> <traffic-lsp-flood-out> <traffic-lsp-rcv-auth-err-out> <traffic-lsp-rcv-err-out> <traffic-lsp-rexmit-out> [ <traffic-xmit-err-out> ] [ <traffic-unknown-pdu-rcv-out> ] } } ]

- NEW: show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> ] [ interfaces ] [ mbuf-priority ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> [ { TABLE_vrf [ <vrf-name-out> ] [ { TABLE_interface [ <traffic-if-name-out> ] [ <traffic-lan-iih-out> ] [ <traffic-lan-iih-rcv-out> ] [ <traffic-lan-iih-xmit-out> ] [ <traffic-lan-iih-rcv-auth-err-out> ] [ <traffic-lan-iih-rcv-err-out> ] [ <traffic-p2p-iih-out> ] [ <traffic-p2p-iih-rcv-out> ] [ <traffic-p2p-iih-xmit-out> ] [ <traffic-p2p-iih-rcv-auth-err-out> ] [ <traffic-p2p-iih-rcv-err-out> ] [ <traffic-csnp-out> ] [ <traffic-csnp-rcv-out> ] [ <traffic-csnp-xmit-out> ] [ <traffic-csnp-rcv-auth-err-out> ] [ <traffic-csnp-rcv-err-out> ] [ <traffic-psnp-out> ] [ <traffic-psnp-rcv-out> ] [ <traffic-psnp-xmit-out> ] [ <traffic-psnp-rcv-auth-err-out> ] [ <traffic-psnp-rcv-err-out> ] [ <traffic-lsp-out> ] [ <traffic-lsp-rcv-out> ] [ <traffic-lsp-flood-out> ] [ <traffic-lsp-rcv-auth-err-out> ] [ <traffic-lsp-rcv-err-out> ] [ <traffic-lsp-rexmit-out> ] [ <traffic-xmit-err-out> ] [ <traffic-unknown-pdu-rcv-out> ] } ] [ <traffic-lan-iih-out> ] [ <traffic-lan-iih-rcv-out> ] [ <traffic-lan-iih-xmit-out> ] [ <traffic-lan-iih-rcv-auth-err-out> ] [ <traffic-lan-iih-rcv-err-out> ] [ <traffic-p2p-iih-out> ] [ <traffic-p2p-iih-rcv-out> ] [ <traffic-p2p-iih-xmit-out> ] [ <traffic-p2p-iih-rcv-auth-err-out> ] [ <traffic-p2p-iih-rcv-err-out> ] [ <traffic-csnp-out> ] [ <traffic-csnp-rcv-out> ] [ <traffic-csnp-xmit-out> ] [ <traffic-csnp-rcv-auth-err-out> ] [ <traffic-csnp-rcv-err-out> ] [ <traffic-psnp-out> ] [ <traffic-psnp-rcv-out> ] [ <traffic-psnp-xmit-out> ] [ <traffic-psnp-rcv-auth-err-out> ] [ <traffic-psnp-rcv-err-out> ] [ <traffic-lsp-out> ] [ <traffic-lsp-rcv-out> ] [ <traffic-lsp-flood-out> ] [ <traffic-lsp-rcv-auth-err-out> ] [ <traffic-lsp-rcv-err-out> ] [ <traffic-lsp-rexmit-out> ] [ <traffic-xmit-err-out> ] [ <traffic-unknown-pdu-rcv-out> ] } ] } ]

- OLD: show lacp counters [ interface <if0> ] [ __readonly__ TABLE_interface <interface> TABLE_member <port> <pdus-sent> <pdus-rcvd> <marker-rcvd> <marker-resp-sent> <pkt-errors> [ <illegal-rcvd> ] [ <unknown-rcvd> ] ]

- NEW: show lacp counters [ interface <if0> ] [ detail ] [ __readonly__ TABLE_interface <interface> TABLE_member <port> <pdus-sent> <pdus-rcvd> <marker-rcvd> <marker-resp-sent> [ <marker-sent> ] [ <marker-resp-rcvd> ] <pkt-errors> [ <pdu-timeout-count> ] [ <flap-count> ] [ <illegal-rcvd> ] [ <unknown-rcvd> ] ]

- OLD: show lldp traffic [ __readonly__ <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> ]

- NEW: show lldp traffic [ __readonly__ <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> <flap_cnt> ]

- OLD: show lldp traffic interface <if> [ __readonly__ <interface> <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> ]

- NEW: show lldp traffic interface <if> [ __readonly__ <interface> <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> <flap_cnt> ]

- OLD: show system internal flash [ __readonly__ TABLE_flash <Mounted-on> <1K-blocks> <used> <Available> <Use-percent> <Filesystem> ]

- NEW: show system internal flash [ __readonly__ TABLE_flash <Mounted-on> <OneK-blocks> <used> <Available> <Use-percent> <Filesystem> ]

- OLD: show telemetry control { database [ subscriptions | destination-groups | destinations | sensor-paths | sensor-groups ] | stats } [ __readonly__ [ <subscription_db_size> ] [ { TABLE_subscriptions <subscription_id> <data_collector_type> } ] [ <sensor_grp_db_size> ] [ { TABLE_sensor_grp <snsr_grp_row_idx> <snsr_grp_id> <snsr_grp_type> <snsr_grp_collector_type> <snsr_grp_timer_interval> <snsr_grp_timer_status> <snsr_grp_sub_count> <snsr_grp_sub_id> <snsr_grp_dc_cur_time> <snsr_grp_dc_min_time> <snsr_grp_dc_max_time> <snsr_grp_enc_cur_time> <snsr_grp_enc_min_time> <snsr_grp_enc_max_time> <snsr_grp_trans_cur_time> <snsr_grp_trans_min_time> <snsr_grp_trans_max_time> <snsr_grp_stream_cur_time> <snsr_grp_stream_min_time> <snsr_grp_stream_max_time> <snsr_grp_stream_col_id_drop> <snsr_grp_stream_last_col_id_drop> <snsr_grp_stream_col_drop> } ] [ <sensor_path_db_size> ] [ { TABLE_sensor_path <path_row_idx> <path_subscribed> <path_group_count> <path_secondary_group_count> <path_level> <path_name> <path_grp_id> <path_query_condition> <path_filter_condition> <path_gpb_cur_enc_size> <path_gpb_min_enc_size> <path_gpb_max_enc_size> <path_json_cur_enc_size> <path_json_min_enc_size> <path_json_max_enc_size> } ] [ <destination_group_db_size> ] [ <destination_group_use_vrf> ] [ { TABLE_destination_group <destination_group_id> <destination_group_refcount> } ] [ <destination_db_size> ] [ { TABLE_destinations <destination_ip> <destination_port> <destination_encoding> <destination_transport> <destination_refcount> } ] [ db_statistics <chunk_alloc_fail> <sensor_path_chunk_create_fail> <sensor_group_chunk_create_fail> <destination_chunk_create_fail> <destination_group_chunk_create_fail> <subscription_chunk_create_fail> <sensor_path_db_create_fail> <sensor_group_db_create_fail> <destination_db_create_fail> <destination_group_db_create_fail> <subscription_db_create_fail> <sensor_path_db_insert_fail> <sensor_group_db_insert_fail> <destination_db_insert_fail> <destination_group_db_insert_fail> <subscription_db_insert_fail> <sensor_path_db_delete_fail> <sensor_group_db_delete_fail> <destination_db_delete_fail> <destination_group_db_delete_fail> <subscription_db_delete_fail> <sensor_path_delete_in_use> <sensor_group_delete_in_use> <destination_delete_in_use> <destination_group_delete_in_use> <delete_destination_in_use_fail> <sensor_path_sensor_group_list_create_fail> <sensor_path_prop_list_create_fail> <sensor_path_secondary_sensor_path_list_create_fail> <sensor_path_secondary_sensor_group_list_create_fail> <sensor_group_sensor_path_list_create_fail> <sensor_group_subscription_list_create_fail> <destination_group_subscription_list_create_fail> <destination_group_destination_list_create_fail> <destination_destination_group_list_create_fail> <subscription_sensor_group_list_create_fail> <subscription_destination_group_list_create_fail> <sensor_group_sensor_path_list_delete_fail> <sensor_group_subscription_list_delete_fail> <sensor_group_subscription_unsupported_data_source_fail> <destination_group_subscription_list_delete_fail> <destination_group_destination_list_delete_fail> <subscription_sensor_group_list_delete_fail> <subscription_destination_group_list_delete_fail> <destination_destination_group_list_delete_fail> <destination_delete_from_destination_group_fail> <destination_group_delete_from_subscription_fail> <sensor_group_delete_from_subscription_fail> <sensor_path_delete_from_sensor_group_fail> <get_encode_cb_fail> <get_transport_cb_fail> ] ]

- NEW: show telemetry control { database [ subscriptions | destination-groups | destinations | sensor-paths | sensor-groups ] | stats } [ __readonly__ [ <subscription_db_size> ] [ { TABLE_subscriptions <subscription_id> <data_collector_type> } ] [ <sensor_grp_db_size> ] [ { TABLE_sensor_grp <snsr_grp_row_idx> <snsr_grp_id> <snsr_grp_type> <snsr_grp_collector_type> <snsr_grp_timer_interval> <snsr_grp_timer_status> <snsr_grp_sub_count> <snsr_grp_sub_id> <snsr_grp_dc_cur_time> <snsr_grp_dc_min_time> <snsr_grp_dc_max_time> <snsr_grp_enc_cur_time> <snsr_grp_enc_min_time> <snsr_grp_enc_max_time> <snsr_grp_trans_cur_time> <snsr_grp_trans_min_time> <snsr_grp_trans_max_time> <snsr_grp_stream_cur_time> <snsr_grp_stream_min_time> <snsr_grp_stream_max_time> <snsr_grp_stream_col_id_drop> <snsr_grp_stream_last_col_id_drop> <snsr_grp_stream_col_drop> } ] [ <sensor_path_db_size> ] [ { TABLE_sensor_path <path_row_idx> <path_subscribed> <path_group_count> <path_secondary_group_count> <path_level> <path_name> <path_grp_id> <path_query_condition> <path_filter_condition> <path_gpb_cur_enc_size> <path_gpb_min_enc_size> <path_gpb_max_enc_size> <path_json_cur_enc_size> <path_json_min_enc_size> <path_json_max_enc_size> <path_dc_cur_time> <path_dc_min_time> <path_dc_max_time> <path_enc_cur_time> <path_enc_min_time> <path_enc_max_time> <path_trans_cur_time> <path_trans_min_time> <path_trans_max_time> <path_stream_cur_time> <path_stream_min_time> <path_stream_max_time> } ] [ <destination_group_db_size> ] [ <destination_group_use_vrf> ] [ { TABLE_destination_group <destination_group_id> <destination_group_refcount> } ] [ <destination_db_size> ] [ { TABLE_destinations <destination_ip> <destination_port> <destination_encoding> <destination_transport> <destination_refcount> } ] [ db_statistics <chunk_alloc_fail> <sensor_path_chunk_create_fail> <sensor_group_chunk_create_fail> <destination_chunk_create_fail> <destination_group_chunk_create_fail> <subscription_chunk_create_fail> <sensor_path_db_create_fail> <sensor_group_db_create_fail> <destination_db_create_fail> <destination_group_db_create_fail> <subscription_db_create_fail> <sensor_path_db_insert_fail> <sensor_group_db_insert_fail> <destination_db_insert_fail> <destination_group_db_insert_fail> <subscription_db_insert_fail> <sensor_path_db_delete_fail> <sensor_group_db_delete_fail> <destination_db_delete_fail> <destination_group_db_delete_fail> <subscription_db_delete_fail> <sensor_path_delete_in_use> <sensor_group_delete_in_use> <destination_delete_in_use> <destination_group_delete_in_use> <delete_destination_in_use_fail> <sensor_path_sensor_group_list_create_fail> <sensor_path_prop_list_create_fail> <sensor_path_secondary_sensor_path_list_create_fail> <sensor_path_secondary_sensor_group_list_create_fail> <sensor_group_sensor_path_list_create_fail> <sensor_group_subscription_list_create_fail> <destination_group_subscription_list_create_fail> <destination_group_destination_list_create_fail> <destination_destination_group_list_create_fail> <subscription_sensor_group_list_create_fail> <subscription_destination_group_list_create_fail> <sensor_group_sensor_path_list_delete_fail> <sensor_group_subscription_list_delete_fail> <sensor_group_subscription_unsupported_data_source_fail> <destination_group_subscription_list_delete_fail> <destination_group_destination_list_delete_fail> <subscription_sensor_group_list_delete_fail> <subscription_destination_group_list_delete_fail> <destination_destination_group_list_delete_fail> <destination_delete_from_destination_group_fail> <destination_group_delete_from_subscription_fail> <sensor_group_delete_from_subscription_fail> <sensor_path_delete_from_sensor_group_fail> <get_encode_cb_fail> <get_transport_cb_fail> ] ]

- OLD: test forwarding [ ip | ipv4 ] [ unicast ] inconsistency [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ stop ] | test consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ stop ]

- NEW: test forwarding [ ip | ipv4 ] [ unicast ] inconsistency [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ stop ] | test consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ stop ]

- OLD: test forwarding ipv6 [ unicast ] inconsistency [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ stop ] | test consistency-checker forwarding ipv6 [ unicast ] [ suppress_transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ stop ]

- NEW: test forwarding ipv6 [ unicast ] inconsistency [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ stop ] | test consistency-checker forwarding ipv6 [ unicast ] [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ stop ]

Deprecated Commands

The following commands are removed in this release.

Part III. XML Support

- Commands with XML/JSON Support

Chapter 28. Commands with XML/JSON Support

- XML Support for Show Commands

XML Support for Show Commands

Show Commands

XML Support

show aaa accounting

yes

show aaa authentication

yes

show aaa authentication login

yes

show aaa authentication login ascii-authentication

yes

show aaa authentication login error-enable

yes

show aaa authentication login invalid-username-log

yes

show aaa authentication login password-aging

yes

show aaa authorization

yes

show aaa bypass-user

yes

show aaa groups

yes

show aaa local user blocked

yes

show aaa user default-role

yes

show access-list

yes

show access-list database

yes

show access-list resource

yes

show access-lists

yes

show accounting log

yes

show accounting log all

yes

show accounting log last-index

yes

show accounting log nvram

yes

show accounting log nvram last-index

yes

show accounting log nvram start-seqnum

yes

show accounting log start-seqnum

yes

show acl status

yes

show amt process

yes

show amt vrf all

yes

show archive log config

yes

show arp access-lists

yes

show background

no

show banner exec

no

show banner motd

yes

show bash-shell

yes

show bfd addrmap

yes

show bfd clients

yes

show bfd discrmap

yes

show bfd intfipmap

yes

show bfd neighbors

yes

show bfd scalar

yes

show bfd session

yes

show bfd-app session status

no

show bgp

no

show bgp

yes

show bgp bmp server

yes

show bgp community

yes

show bgp convergence

yes

show bgp convergence private

no

show bgp dampening dampened

yes

show bgp dampening flap-statistics

yes

show bgp dampening parameters

yes

show bgp default-info

no

show bgp event-history

no

show bgp evi

yes

show bgp extcommunity

yes

show bgp l3vpn

yes

show bgp neighbors

yes

show bgp neighbors commands

yes

show bgp neighbors flap-statistics

yes

show bgp neighbors paths

yes

show bgp paths

yes

show bgp peer

yes

show bgp peer-template

yes

show bgp prefix-list

yes

show bgp private

no

show bgp private attr

no

show bgp private damp

no

show bgp private debug history

no

show bgp process

yes

show bgp received-paths

yes

show bgp regexp

yes

show bgp self-originated

yes

show bgp sessions

yes

show bgp statistics

yes

show bgp summary

yes

show boot

yes

show boot auto-copy

yes

show boot auto-copy list

yes

show boot autocopy-status

no

show boot current

yes

show boot mode

yes

show boot order

yes

show boot sup-1

yes

show boot sup-2

yes

show boot timings

no

show boot variables

yes

show bootmode

yes

show buffers ip

no

show callhome

yes

show callhome destination-profile

yes

show callhome destination-profile profile

yes

show callhome destination-profile profile CiscoTAC-1

yes

show callhome destination-profile profile full-txt-destination

yes

show callhome destination-profile profile short-txt-destination

yes

show callhome transport

yes

show callhome transport-email

yes

show callhome user-def-cmds

yes

show catena

yes

show catena analytics

yes

show cdp

yes

show cdp all

yes

show cdp global

yes

show cdp neighbors

yes

show cdp neighbors detail

yes

show cdp traffic interface2

yes

show cfs application

yes

show cfs lock

yes

show cfs merge status

yes

show cfs peers

yes

show cfs regions

yes

show cfs remote-app vsan domain

no

show cfs remote-switches vsan

yes

show cfs static peers

no

show cfs status

yes

show chassis-family

no

show checkpoint

yes

show checkpoint summary

yes

show class-map

yes

show class-map type control-plane

yes

show class-map type network-qos

yes

show class-map type psp

yes

show cli alias

yes

show cli dynamic integers

yes

show cli dynamic strings

yes

show cli dynamic-cmd

no

show cli history

no

show cli interface table

no

show cli list

no

show cli registry

no

show cli syntax

no

show cli variables

yes

show clock

yes

show clock utc

no

show config-profile

yes

show config-profile applied

yes

show config-replace log exec

yes

show config-replace status

yes

show config-template

yes

show configuration session

yes

show configuration session global-info

yes

show configuration session nx-api rest

no

show configuration session nx-yang json

no

show configuration session status

yes

show configuration session summary

yes

show configuration session vsh

yes

show consistency-checker copp

no

show consistency-checker dme

no

show consistency-checker egress-xlate private-vlan

no

show consistency-checker fex-interfaces fex

no

show consistency-checker forwarding ipv6 show forwarding ipv6 inconsistency

yes

show consistency-checker forwarding recover

no

show consistency-checker forwarding show forwarding inconsistency

yes

show consistency-checker forwarding single-route ipv4 vrf

no

show consistency-checker l2 multicast group source vlan

no

show consistency-checker l2-tahoe module

no

show consistency-checker l2-tahoe switchport interface

no

show consistency-checker l3 multicast group source vrf

no

show consistency-checker l3-interface module

no

show consistency-checker link-state fabric-ieth

no

show consistency-checker link-state module

no

show consistency-checker membership port-channels

no

show consistency-checker membership vlan

no

show consistency-checker nxapi interface

no

show consistency-checker pacl module

no

show consistency-checker pacl port-channels

no

show consistency-checker port-security

no

show consistency-checker qinq

no

show consistency-checker qinvni

no

show consistency-checker racl module

no

show consistency-checker racl port-channels

no

show consistency-checker storm-control

no

show consistency-checker stp-state vlan

no

show consistency-checker vacl

no

show consistency-checker vpc

no

show consistency-checker vxlan bgp

no

show consistency-checker vxlan config-check

no

show consistency-checker vxlan flood_list

no

show consistency-checker vxlan interface

no

show consistency-checker vxlan l3-route vrf

no

show consistency-checker vxlan mh mac-addresses

no

show consistency-checker vxlan mh pathlist

no

show consistency-checker vxlan peers

no

show consistency-checker vxlan pv

no

show consistency-checker vxlan qinq-qinvni

no

show consistency-checker vxlan routes

no

show consistency-checker vxlan selective-qinvni

no

show consistency-checker vxlan selective-qinvni interface

no

show consistency-checker vxlan unicast-nve-peers

no

show consistency-checker vxlan vlan

no

show consistency-checker vxlan xconnect

no

show controller accounting log

no

show copp diff profile profile2

no

show copp profile

yes

show copp status

yes

show copyright

yes

show cores

yes

show crypto ca certificates

yes

show crypto ca certstore

yes

show crypto ca crl

yes

show crypto ca remote-certstore

yes

show crypto ca trustpoints

yes

show crypto ca trustpool

yes

show crypto ca trustpool last download status

yes

show crypto ca trustpool policy

yes

show crypto certificatemap

yes

show crypto key mypubkey rsa

yes

show crypto ssh-auth-map

no

show crypto ssh-auth-map

yes

show cts

yes

show current

no

show dampening interface

no

show diagnostic bootup level

yes

show diagnostic content module

yes

show diagnostic description module test all

yes

show diagnostic events

yes

show diagnostic ondemand setting

yes

show diagnostic result module

yes

show diagnostic result module all

yes

show diagnostic simulation module

yes

show diagnostic status module

yes

show diff rollback-patch

yes

show dot1q-tunnel

yes

show dot1q-tunnel interface

yes

show dot1x

yes

show ecp

yes

show elam report

no

show email

yes

show encryption service stat

yes

show environment

yes

show eol status

no

show errdisable detect

yes

show errdisable flap

no

show evb

yes

show evb hosts

yes

show evb interface

no

show evb vsi

yes

show event manager environment

yes

show event manager event-types

yes

show event manager events action-log

yes

show event manager history events

yes

show event manager policy-state

yes

show event manager script system

yes

show event manager system-policy

yes

show event-history

no

show event-history xbar

no

show fabric database dci

no

show fabric database dci

yes

show fabric database host

yes

show fabric database host statistics

yes

show fabric database host summary

yes

show fabric database host temp

no

show fabric database profile-map

yes

show fabric database static-host

yes

show fabric database statistics

yes

show fabric forwarding host-db

yes

show fabric forwarding ip local

yes

show fabric forwarding ipv6 local

yes

show fabric multicast

yes

show fabric multicast event-history

no

show fabric multicast globals

yes

show fabric multicast ipv4 l2 vni

yes

show fabric multicast ipv4 rp

no

show fabric multicast statistics

no

show fabric multicast trigger-bgp-update vnid source group nlri-origin

no

show fabric multicast trigger-isis-update nh-addr swid

no

show fabric multicast trigger-m6rib-update vrf source group

no

show fabric multicast vrf

yes

show fabricpath conflict

yes

show fabricpath counters dropped

yes

show fabricpath isis

yes

show fabricpath isis adjacency

yes

show fabricpath isis database

yes

show fabricpath isis ftag

yes

show fabricpath isis hostname

yes

show fabricpath isis interface

yes

show fabricpath isis ip mroute

yes

show fabricpath isis ip redistribute mroute

yes

show fabricpath isis ip redistribute route show fabricpath isis ipv6 redistribute route

no

show fabricpath isis ip route show fabricpath isis ipv6 route

no

show fabricpath isis ipv6 mroute

yes

show fabricpath isis ipv6 redistribute mroute

yes

show fabricpath isis mac mroute

yes

show fabricpath isis mac redistribute mroute

yes

show fabricpath isis mesh-group

yes

show fabricpath isis route

yes

show fabricpath isis rrm

yes

show fabricpath isis spf-log

yes

show fabricpath isis srm

yes

show fabricpath isis ssn

yes

show fabricpath isis statistics

yes

show fabricpath isis switch-id

yes

show fabricpath isis topology

yes

show fabricpath isis traffic

yes

show fabricpath isis trees

yes

show fabricpath isis vlan-range

yes

show fabricpath load-balance

yes

show fabricpath load-balance multicast ftag-selected flow-type vlan module

yes

show fabricpath load-balance unicast forwarding-path ftag switchid flow-type module

yes

show fabricpath switch

yes

show fabricpath switch-id local

yes

show fabricpath system-id

yes

show fabricpath timers

yes

show fabricpath topology

yes

show fabricpath topology ftag

yes

show fabricpath topology interface

yes

show fabricpath topology interface vlan

yes

show fabricpath topology vlan

yes

show fabricpath topology-id

yes

show fc2 bind

yes

show fc2 classf

yes

show fc2 exchange

yes

show fc2 exchresp

yes

show fc2 flogi

yes

show fc2 nport

yes

show fc2 plogi

yes

show fc2 plogi_pwwn

yes

show fc2 port brief

yes

show fc2 port drops

yes

show fc2 port state

yes

show fc2 socket

yes

show fc2 sockexch

yes

show fc2 socknotify

yes

show fc2 socknport

yes

show fc2 vsan

yes

show fcdroplatency

yes

show fcoe

yes

show fcoe database

yes

show fcoe-npv issu-impact

yes

show fctimer

yes

show fctimer D_S_TOV

yes

show fctimer distribution status

no

show fctimer E_D_TOV

yes

show fctimer F_S_TOV

yes

show fctimer last action status

yes

show fctimer pending

yes

show fctimer pending-diff

yes

show fctimer R_A_TOV

yes

show fctimer session status

yes

show fctimer session-status

no

show fctimer status

yes

show fctimer vsan

yes

show feature

yes

show feature-set

yes

show feature-set services

yes

show fhrp

yes

show fhrp verbose

yes

show file

yes

show fips status

yes

show flow cache

yes

show flow exporter

yes

show flow glbl-pkt-cnt

no

show flow interface

yes

show flow monitor

yes

show flow record

yes

show flow sw-monitor

no

show flow timeout

yes

show flow tracer

no

show forwarding

no

show forwarding adjacency

yes

show forwarding bypass-hardware

no

show forwarding capture

yes

show forwarding distribution capture

yes

show forwarding distribution clients

yes

show forwarding distribution fib-state

yes

show forwarding distribution ip igmp snooping

yes

show forwarding distribution ipv6 multicast route

yes

show forwarding distribution l2 multicast

yes

show forwarding distribution lisp counters

yes

show forwarding distribution lisp vrf enabled

yes

show forwarding distribution logging

no

show forwarding distribution multicast

yes

show forwarding distribution multicast client

yes

show forwarding distribution multicast client-ack-db

yes

show forwarding distribution multicast download

no

show forwarding distribution multicast mfib

yes

show forwarding distribution multicast outgoing-interface-list

yes

show forwarding distribution multicast resp-ack-timer-msgs

no

show forwarding distribution multicast route

yes

show forwarding distribution nve overlay-vlan

yes

show forwarding distribution pauz

no

show forwarding distribution peer-id

yes

show forwarding distribution test on

no

show forwarding distribution trace

no

show forwarding dvif primary

no

show forwarding dvif secondary

no

show forwarding ecmp

yes

show forwarding ecmp recursive

yes

show forwarding file-log disable

no

show forwarding file-log enable

no

show forwarding interfaces

yes

show forwarding ipv6 adjacency

yes

show forwarding ipv6 multicast route

yes

show forwarding ipv6 pss route

no

show forwarding ipv6 route

yes

show forwarding kvfib cache on

no

show forwarding l2 multicast

yes

show forwarding l2vpn ipv6 multicast route

no

show forwarding l2vpn label vpls

yes

show forwarding l2vpn label xconnect

yes

show forwarding l2vpn multicast outgoing-interface-list

no

show forwarding l2vpn multicast route

no

show forwarding l2vpn service vpls

no

show forwarding l2vpn service xconnect

no

show forwarding l2vpn vlan

yes

show forwarding mpls

yes

show forwarding mpls aggregate

yes

show forwarding mpls cbts

yes

show forwarding mpls drop-stats

yes

show forwarding mpls ecmp

yes

show forwarding mpls option_b

yes

show forwarding mpls srte module

yes

show forwarding mpls summary

yes

show forwarding mpls te

yes

show forwarding multicast outgoing-interface-list

yes

show forwarding multicast route

yes

show forwarding multicast-sr loopback interface

no

show forwarding nve l2 ingress-replication-peers

yes

show forwarding nve l3 adjacency tunnel

yes

show forwarding nve l3 ecmp

no

show forwarding nve l3 peers

yes

show forwarding nve underlay-interfaces

no

show forwarding otv

yes

show forwarding pss route

no

show forwarding restart

no

show forwarding security group-tag

yes

show forwarding security mac

yes

show forwarding test on

no

show forwarding trace

yes

show forwarding trace profile

no

show forwarding trace profile funcstats

yes

show fte event

yes

show fte exporter

yes

show fte monitor

yes

show fte record

yes

show guestshell

yes

show hardware

yes

show hardware access-list lou resource threshold

yes

show hardware access-list resource pooling

yes

show hardware access-list tcam

yes

show hardware capacity

no

show hardware capacity eobc

yes

show hardware capacity fabric-utilization

yes

show hardware capacity forwarding

no

show hardware capacity interface

yes

show hardware capacity module

yes

show hardware capacity power

yes

show hardware fabricpath mac-learning module

yes

show hardware feature-capability

yes

show hardware flow aging

no

show hardware flow entry address type

no

show hardware flow ip

no

show hardware flow ipmac

no

show hardware flow ipv6

no

show hardware flow l2

no

show hardware flow mpls

no

show hardware flow sampler

no

show hardware flow utilization

no

show hardware forwarding interface statistics mode

yes

show hardware forwarding memory health detail

yes

show hardware forwarding memory health summary

yes

show hardware ip verify

yes

show hardware profile buffer monitor show hardware profile buffer monitor internal

yes

show hardware profile forwarding-mode

no

show hardware profile latency monitor sampling show hardware profile latency monitor

yes

show hardware profile module

no

show hardware profile status

yes

show hardware profile tcam region

yes

show hardware qos afd profile

yes

show hardware qos burst-detect max-records

yes

show hardware qos eoq stats-class

yes

show hardware qos include ipg

yes

show hardware qos ing-pg-hdrm-reserve

yes

show hardware qos ing-pg-no-min

yes

show hardware qos ing-pg-share

yes

show hardware qos min-buffer

yes

show hardware qos ns-buffer-profile

yes

show hardware qos ns-mcq3-alias

yes

show hardware rate-limiter

yes

show hardware rate-limiter span-egress

yes

show hardware rl snmp class-id

yes

show hardware rl snmp global class-id

yes

show hardware rl snmp local snmp-index class-id

yes

show hostname

yes

show hosts

yes

show hsrp

yes

show hsrp anycast

no

show hsrp anycast interface vlan

no

show hsrp anycast remote-db

no

show hsrp anycast summary

no

show hsrp bfd-sessions

no

show hsrp bfd-sessions

yes

show hsrp delay

yes

show hsrp ext-mib sec-addr

yes

show hsrp ext-mib use-bia

yes

show hsrp mgo

yes

show hsrp summary

yes

show icam entries acl module inst

yes

show icam entries multicast module

yes

show icam prediction entries acl module inst

yes

show icam prediction entries multicast module

yes

show icam prediction resource acl_tcam module inst

yes

show icam prediction scale

yes

show icam resource acl_tcam module inst

yes

show icam scale

yes

show ieth-header-decode

no

show imp client

no

show imp client sa

no

show inband-telemetry exporter

yes

show inband-telemetry flow-profile

yes

show inband-telemetry monitor

yes

show inband-telemetry queue-profile

yes

show inband-telemetry record

yes

show inband-telemetry sessions

yes

show inband-telemetry watchlist

yes

show incompatibility system

yes

show incompatibility-all system

yes

show install

yes

show install all failed-standby

yes

show install all failure-reason

yes

show install all impact

no

show install all impact epld

yes

show install all status

no

show install all time-stats

no

show install epld status

yes

show install impact

no

show install impact detail

no

show install log

yes

show install mode

yes

show install packages

yes

show install patches

yes

show interface

yes

show interface aggregate-counters

yes

show interface bbcredit

yes

show interface brief

yes

show interface cable-diagnostics-tdr

yes

show interface capabilities

yes

show interface counters

yes

show interface counters brief

yes

show interface counters detailed

yes

show interface counters detailed all

no

show interface counters detailed all

yes

show interface counters detailed cached

yes

show interface counters details

yes

show interface counters errors

yes

show interface counters errors

no

show interface counters snmp

yes

show interface counters storm-control

yes

show interface counters table

no

show interface counters trunk

yes

show interface dampening

yes

show interface debounce

yes

show interface description

yes

show interface detail-counters

yes

show interface fcoe

yes

show interface fec

no

show interface flowcontrol

yes

show interface hardware-mappings

no

show interface mac-address

yes

show interface priority-flow-control

yes

show interface private-vlan mapping

yes

show interface pruning

yes

show interface snmp-ifindex

yes

show interface status

yes

show interface status err-disabled

yes

show interface status err-vlans

yes

show interface switchport

yes

show interface switchport backup

yes

show interface transceiver

yes

show interface transceiver fex-fabric

yes

show interface transceiver inventory

no

show interface trunk

yes

show interface trunk vsan

no

show interface trunk vsan

yes

show interface untagged-cos

yes

show interface vlan mapping

yes

show inventory

yes

show ip adjacency

yes

show ip adjacency pt

no

show ip amt relay

yes

show ip amt route

yes

show ip amt tunnel

yes

show ip arp

yes

show ip arp anycast topo-info

yes

show ip arp cache

no

show ip arp client

yes

show ip arp controller-statistics

yes

show ip arp esi

yes

show ip arp inspection

yes

show ip arp inspection interfaces

yes

show ip arp inspection log

yes

show ip arp inspection statistics

yes

show ip arp inspection vlan

yes

show ip arp multihoming-statistics

yes

show ip arp off-list

yes

show ip arp open-flow error-statistics

yes

show ip arp snmp pttree

no

show ip arp statistics

yes

show ip arp suppression topo-info

yes

show ip arp suppression-cache

yes

show ip arp tunnel-statistics

yes

show ip arp unnum-svi-adj

no

show ip arp vaddr

no

show ip arp vpc-statistics

yes

show ip as-path-access-list

yes

show ip cache

no

show ip client

yes

show ip community-list

yes

show ip debug

no

show ip dhcp global statistics

yes

show ip dhcp option82 suboption info interface

yes

show ip dhcp relay

yes

show ip dhcp relay address

yes

show ip dhcp relay information trusted-sources

yes

show ip dhcp relay statistics

yes

show ip dhcp snooping

yes

show ip dhcp snooping binding

no

show ip dhcp snooping statistics

no

show ip dhcp status

yes

show ip dns source-interface

yes

show ip dns source-interface vrf all

yes

show ip eigrp

yes

show ip eigrp accounting

yes

show ip eigrp event

no

show ip eigrp event-history

no

show ip eigrp event-history bfd

no

show ip eigrp interfaces

yes

show ip eigrp metric

no

show ip eigrp route-map statistics

yes

show ip eigrp sia-event

no

show ip eigrp sia-statistics

no

show ip eigrp timers

no

show ip eigrp traffic

yes

show ip extcommunity-list

yes

show ip fib adjacency

yes

show ip fib distribution

no

show ip fib distribution capture

yes

show ip fib distribution clients

yes

show ip fib distribution mroute

yes

show ip fib distribution multicast

yes

show ip fib distribution multicast outgoing-interface-list

yes

show ip fib distribution state

yes

show ip fib interfaces

yes

show ip fib mroute

yes

show ip fib mroute txlist

no

show ip fib route

yes

show ip fib route recovered

no

show ip ftm statistics

no

show ip ftp source-interface

yes

show ip ftp source-interface vrf all

yes

show ip http source-interface

yes

show ip http source-interface vrf all

yes

show ip igmp event-history

no

show ip igmp groups

yes

show ip igmp interface

yes

show ip igmp local-groups

yes

show ip igmp policy statistics reports

yes

show ip igmp snooping

yes

show ip igmp snooping event-history

no

show ip igmp snooping explicit-tracking

yes

show ip igmp snooping filter details

yes

show ip igmp snooping groups

yes

show ip igmp snooping lookup-mode

yes

show ip igmp snooping mac-oif

yes

show ip igmp snooping mrouter

yes

show ip igmp snooping pw vlan brief

yes

show ip igmp snooping querier

yes

show ip igmp snooping report statistics

yes

show ip igmp snooping snmp mib adminMode

yes

show ip igmp snooping snmp mib aliasingMode

yes

show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus

yes

show ip igmp snooping snmp mib explicitTrackingTable

yes

show ip igmp snooping snmp mib fallBackTime

yes

show ip igmp snooping snmp mib fastBlockEnabled

yes

show ip igmp snooping snmp mib fastleaveenabled

yes

show ip igmp snooping snmp mib filterStatsTable

yes

show ip igmp snooping snmp mib ifAccessGroupTable

yes

show ip igmp snooping snmp mib ifConfigTable

yes

show ip igmp snooping snmp mib ifLimitTable

yes

show ip igmp snooping snmp mib ifLimitTotalTable

yes

show ip igmp snooping snmp mib igmpsnoopingenabled

yes

show ip igmp snooping snmp mib iterfaceStatsTable

yes

show ip igmp snooping snmp mib lastMemeberQueryCount

yes

show ip igmp snooping snmp mib lastMemeberQueryInterval

yes

show ip igmp snooping snmp mib leaveQueryType

yes

show ip igmp snooping snmp mib mcastGroupTable

yes

show ip igmp snooping snmp mib mcastRouterCfgTable

yes

show ip igmp snooping snmp mib mcastRouterConfigTable

yes

show ip igmp snooping snmp mib multicastGroupConfigTable

yes

show ip igmp snooping snmp mib multicastGroupPortListTable

yes

show ip igmp snooping snmp mib multicastGroupTable

yes

show ip igmp snooping snmp mib operMode

yes

show ip igmp snooping snmp mib querierTable

yes

show ip igmp snooping snmp mib reportsuppressionenabled

yes

show ip igmp snooping snmp mib robustnessVariable

yes

show ip igmp snooping snmp mib routerAlertCheckEnabled

yes

show ip igmp snooping snmp mib sourceOnlyEntryAgingTime

yes

show ip igmp snooping snmp mib sourceOnlyLearningEnabled

yes

show ip igmp snooping snmp mib tcnFloodQueryCount

yes

show ip igmp snooping snmp mib timeToLiveCheckEnabled

yes

show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled

yes

show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus

yes

show ip igmp snooping snmp mib v3SnoopingSupport

yes

show ip igmp snooping snmp mib vlanconfigtable

yes

show ip igmp snooping snmp mib vlanFilterConfigTable

yes

show ip igmp snooping statistics

yes

show ip igmp vrf all

yes

show ip interface

yes

show ip lisp

no

show ip lisp data-cache

no

show ip lisp locator-hash

no

show ip lisp map-cache

no

show ip lisp statistics

no

show ip lisp translate-cache

no

show ip lisp version-hash

no

show ip load-sharing

yes

show ip local policy

yes

show ip local-pt

no

show ip logging

yes

show ip mbgp

no

show ip mbgp community

no

show ip mbgp dampening

no

show ip mbgp extcommunity

no

show ip mbgp flap-statistics

no

show ip mbgp neighbors

no

show ip mbgp nexthop

no

show ip mbgp nexthop-database

no

show ip mbgp prefix-list

no

show ip mbgp received-paths

no

show ip mroute

yes

show ip msdp count

yes

show ip msdp event-history

no

show ip msdp mesh-group

yes

show ip msdp peer

yes

show ip msdp policy statistics sa-policy in

yes

show ip msdp rpf

yes

show ip msdp sa

yes

show ip msdp sources

yes

show ip msdp statistics

yes

show ip msdp summary

yes

show ip multicast vrf

yes

show ip nat max

yes

show ip nat statistics

yes

show ip nat timeout

yes

show ip nat translations

yes

show ip nat-alias

no

show ip ospf

yes

show ip ospf border-routers

yes

show ip ospf database

yes

show ip ospf database database-summary

yes

show ip ospf database detail

yes

show ip ospf event-history

no

show ip ospf event-history detail

no

show ip ospf ha

yes

show ip ospf interface

yes

show ip ospf interface brief

yes

show ip ospf lsa-content-changed-list

yes

show ip ospf memory

yes

show ip ospf neighbors

yes

show ip ospf neighbors detail

yes

show ip ospf neighbors summary

yes

show ip ospf policy statistics

yes

show ip ospf request-list

yes

show ip ospf retransmission-list

yes

show ip ospf route

yes

show ip ospf route summary

yes

show ip ospf segment-routing global-block

yes

show ip ospf segment-routing sid-database

yes

show ip ospf sham-links

yes

show ip ospf statistics

yes

show ip ospf summary-address

yes

show ip ospf traffic

yes

show ip ospf traps-queue

no

show ip ospf virtual-links

yes

show ip ospf virtual-links brief

yes

show ip overlay-traffic

no

show ip pim bitfield

no

show ip pim config-sanity

yes

show ip pim df

yes

show ip pim event-history

no

show ip pim fabric info

yes

show ip pim fabric legacy-vlans

yes

show ip pim group-range

yes

show ip pim host-proxy

yes

show ip pim interface

yes

show ip pim mdt

yes

show ip pim mdt bgp

yes

show ip pim mdt history interval

yes

show ip pim mdt receive

yes

show ip pim mdt send

yes

show ip pim neighbor

yes

show ip pim oif-list

yes

show ip pim policy statistics

yes

show ip pim policy statistics jp

yes

show ip pim route

yes

show ip pim rp

yes

show ip pim rp-hash

yes

show ip pim statistics

yes

show ip pim vrf

yes

show ip ping source-interface

yes

show ip ping source-interface vrf all

yes

show ip policy

yes

show ip prefix-list

yes

show ip process

yes

show ip rip

yes

show ip rip interface

yes

show ip rip memory

yes

show ip rip neighbor

yes

show ip rip policy statistics redistribute

yes

show ip rip route

yes

show ip rip statistics

yes

show ip route

yes

show ip router-id

no

show ip rsvp

yes

show ip sla application

yes

show ip sla configuration

yes

show ip sla enhanced-history collection-statistics

yes

show ip sla enhanced-history distribution-statistics

yes

show ip sla group schedule

yes

show ip sla history

yes

show ip sla reaction-configuration

yes

show ip sla reaction-trigger

yes

show ip sla responder

yes

show ip sla statistics

yes

show ip sla twamp connection detail

yes

show ip sla twamp connection requests

yes

show ip sla twamp session

yes

show ip sla twamp standards

yes

show ip ssh source-interface

yes

show ip ssh source-interface vrf all

yes

show ip static-route

yes

show ip stats

no

show ip tcp mss

no

show ip telnet source-interface

yes

show ip telnet source-interface vrf all

yes

show ip tftp source-interface

yes

show ip tftp source-interface vrf all

yes

show ip traceroute source-interface

yes

show ip traceroute source-interface vrf all

yes

show ip traffic

yes

show ip txlist list

no

show ip udp relay

yes

show ip udp relay interface

yes

show ip udp relay object-group

yes

show ip verify source

yes

show ipv6 adjacency

yes

show ipv6 amt tunnel

yes

show ipv6 bgp

no

show ipv6 bgp community

no

show ipv6 bgp dampening

no

show ipv6 bgp extcommunity

no

show ipv6 bgp flap-statistics

no

show ipv6 bgp neighbors

no

show ipv6 bgp nexthop

no

show ipv6 bgp nexthop-database

no

show ipv6 bgp received-paths

no

show ipv6 bgp regexp

no

show ipv6 bgp summary

no

show ipv6 cache

no

show ipv6 client

yes

show ipv6 dhcp guard policy

yes

show ipv6 dhcp relay

yes

show ipv6 dhcp relay statistics

yes

show ipv6 dhcp-ldra

yes

show ipv6 dhcp-ldra statistics

yes

show ipv6 eigrp route-map statistics

yes

show ipv6 fragments

yes

show ipv6 icmp

yes

show ipv6 icmp global traffic

yes

show ipv6 icmp interface

yes

show ipv6 icmp ndp

no

show ipv6 icmp off-list

yes

show ipv6 icmp process sdb

no

show ipv6 icmp vaddr

yes

show ipv6 icmp vpc-statistics

yes

show ipv6 interface

yes

show ipv6 interface global

no

show ipv6 lisp data-cache

no

show ipv6 local policy

yes

show ipv6 local-pt

no

show ipv6 mld groups

yes

show ipv6 mld local-groups

yes

show ipv6 mld vrf all

no

show ipv6 mroute

yes

show ipv6 mtu

yes

show ipv6 multicast vrf

yes

show ipv6 nd ra dns search-list

yes

show ipv6 nd ra dns server

yes

show ipv6 nd raguard policy

yes

show ipv6 nd rt-pref global pt

no

show ipv6 ndp

no

show ipv6 neighbor binding

no

show ipv6 neighbor binding mac

no

show ipv6 neighbor static

yes

show ipv6 pim bitfield

no

show ipv6 pim df

yes

show ipv6 pim embed-rp

no

show ipv6 pim event-history

no

show ipv6 pim fabric info

yes

show ipv6 pim fabric legacy-vlans

yes

show ipv6 pim group-range

yes

show ipv6 pim interface show ipv6 pim interface

yes

show ipv6 pim neighbor

yes

show ipv6 pim oif-list

yes

show ipv6 pim policy statistics jp

yes

show ipv6 pim route

yes

show ipv6 pim rp

yes

show ipv6 pim rp-hash

yes

show ipv6 pim statistics

yes

show ipv6 pim vrf

yes

show ipv6 policy

yes

show ipv6 prefix-list

yes

show ipv6 process

yes

show ipv6 process sdb

no

show ipv6 raguard statistics

yes

show ipv6 rip policy statistics redistribute

yes

show ipv6 route

yes

show ipv6 routers

yes

show ipv6 snooping capture-policy

yes

show ipv6 snooping counters vlan

yes

show ipv6 snooping events

yes

show ipv6 snooping features

yes

show ipv6 snooping messages

yes

show ipv6 snooping policies

yes

show ipv6 snooping policy

yes

show ipv6 snooping pss database

yes

show ipv6 static-route

yes

show ipv6 statistics

no

show ipv6 traffic

yes

show isis

yes

show isis adjacency

yes

show isis csnp

yes

show isis database

yes

show isis distribute-ls

yes

show isis event-history

no

show isis hostname

yes

show isis interface

yes

show isis ipv6 redistribute route

yes

show isis ipv6 route

yes

show isis ipv6 route-map statistics

yes

show isis ipv6 summary-address

yes

show isis lslib

no

show isis lsp free-list

no

show isis mesh-group

yes

show isis non tlv overflow-list

no

show isis redistribute route

yes

show isis route

yes

show isis route is

no

show isis route-map statistics

yes

show isis rrm

yes

show isis segment-routing local-mapcache

no

show isis segment-routing mapcache

yes

show isis segment-routing remote-srgb

yes

show isis segment-routing sids

yes

show isis spf-adjacency

yes

show isis spf-log

yes

show isis srm

yes

show isis ssn

yes

show isis statistics

yes

show isis summary-address

yes

show isis topology

yes

show isis traffic

yes

show itd

yes

show itd session device-group

yes

show itd statistics

yes

show itd vrf

yes

show key chain

yes

show key chain mode decrypt

yes

show keystore

yes

show kim inconsistency

no

show kubernetes containers

no

show l2 mroute

yes

show l2 multicast ftag

yes

show l2 multicast trees

yes

show l2 route

yes

show l2fwder l2rib info

no

show l2fwder statistics

no

show l2rib clients

yes

show l2rib producers

yes

show l2rib registrations

yes

show l2route evpn ead all

yes

show l2route evpn ethernet-segment esi

yes

show l2route evpn fl all

yes

show l2route evpn fl evi

yes

show l2route evpn imet all

yes

show l2route evpn imet evi

yes

show l2route evpn mac all

yes

show l2route evpn mac evi

yes

show l2route evpn mac-ip all

yes

show l2route evpn mac-ip evi

yes

show l2route evpn path-list all

yes

show l2route evpn startup-route all

yes

show l2route evpn startup-route evi

yes

show l2route fl topology

yes

show l2route peerid

yes

show l2route summary

yes

show l2route topology

yes

show lacp counters

yes

show lacp interface

yes

show lacp issu-impact

yes

show lacp neighbor

yes

show lacp port-channel

yes

show lacp system-identifier

yes

show ldap-search-map

yes

show ldap-server

yes

show ldap-server groups

yes

show ldap-server statistics

yes

show license

yes

show license brief

yes

show license default

yes

show license feature package mapping

yes

show license file

yes

show license host-id

yes

show license reserved

no

show license tech support

no

show license usage

yes

show line

yes

show line console

yes

show line console connected

yes

show line console user-input-string

yes

show lisp ddt

no

show lisp ddt queue

no

show lisp ddt referral-cache

no

show lisp dynamic-eid

no

show lisp elp

no

show lisp negative-prefix

no

show lisp proxy-itr

no

show lisp site

no

show lisp site instance-id

no

show lisp smr

no

show lisp stats-cache

no

show lldp all

yes

show lldp dcbx interface

yes

show lldp entry

yes

show lldp interface

yes

show lldp neighbors

yes

show lldp neighbors detail

yes

show lldp neighbors system-detail

yes

show lldp portid-subtype

yes

show lldp timers

yes

show lldp tlv-select

yes

show lldp traffic

yes

show lldp traffic interface

yes

show locator-led status

yes

show logging

no

show logging console

no

show logging info

yes

show logging ip access-list cache

yes

show logging ip access-list status

yes

show logging last

no

show logging level

yes

show logging level

no

show logging level aaa

no

show logging level acllog

no

show logging level aclmgr

no

show logging level adbm

no

show logging level adjmgr

no

show logging level amt

no

show logging level arp

no

show logging level ascii-cfg

no

show logging level assoc_mgr

no

show logging level backup

no

show logging level bfd

no

show logging level bgp

no

show logging level bloggerd

no

show logging level bootvar

no

show logging level callhome

no

show logging level capability

no

show logging level catena

no

show logging level cdp

no

show logging level cert_enroll

no

show logging level cert-enroll

no

show logging level cfs

no

show logging level clis

no

show logging level clk_mgr

no

show logging level confcheck

no

show logging level copp

no

show logging level core

no

show logging level cts

no

show logging level dhcp_snoop

no

show logging level diagnostic device_test

no

show logging level diagnostic diagclient

no

show logging level diagnostic diagmgr

no

show logging level dot1x

no

show logging level ecp

no

show logging level eigrp

no

show logging level eltm

no

show logging level epp

no

show logging level ethdstats

no

show logging level ethpm

no

show logging level evb

no

show logging level evmc

no

show logging level evmed

no

show logging level evms

no

show logging level fabric forwarding

no

show logging level fabricpath isis

no

show logging level fabricpath switch-id

no

show logging level fcoe_mgr

no

show logging level feature-mgr

no

show logging level fs-daemon

no

show logging level gpixm

no

show logging level hardware-telemetry

no

show logging level hsrp

no

show logging level icam

no

show logging level im

no

show logging level imp

no

show logging level interface-vlan

no

show logging level ip igmp

no

show logging level ip msdp

no

show logging level ip sla responder

no

show logging level ip sla sender

no

show logging level ip sla twamp-server

no

show logging level ipconf

no

show logging level ipfib

no

show logging level ipqos

no

show logging level ipv6 icmp

no

show logging level iscm

no

show logging level isis

no

show logging level keystore

no

show logging level l2fm

no

show logging level l3vm

no

show logging level lacp

no

show logging level ldap

no

show logging level license

no

show logging level lim

no

show logging level lisp

no

show logging level lldp

no

show logging level m2rib

no

show logging level mfdm

no

show logging level mfwd

no

show logging level mmode

no

show logging level module

no

show logging level monitor

no

show logging level mpls ldp

no

show logging level mpls manager

no

show logging level mpls switching

no

show logging level mpls traffic-eng

no

show logging level mvsh

no

show logging level nat

no

show logging level nbm

no

show logging level netstack

no

show logging level nfm

no

show logging level ngoam

no

show logging level npv

no

show logging level ntp

no

show logging level nve

no

show logging level nxsdk

no

show logging level openflow

no

show logging level ospf

no

show logging level ospfv3

no

show logging level otv

no

show logging level pfstat

no

show logging level pim

no

show logging level pixm

no

show logging level pktmgr

no

show logging level platform

no

show logging level plbm

no

show logging level plcmgr

no

show logging level pltfm_config

no

show logging level plugin

no

show logging level poap

no

show logging level poed

no

show logging level port

no

show logging level port-channel

no

show logging level port-profile

no

show logging level port-resources

no

show logging level port-security

no

show logging level private-vlan

no

show logging level ptp

no

show logging level radius

no

show logging level res_mgr

no

show logging level rip

no

show logging level routing ipv6 multicast

no

show logging level routing multicast

no

show logging level rpm

no

show logging level rsvp

no

show logging level sal

no

show logging level san-port-channel

no

show logging level scheduler

no

show logging level security

no

show logging level segment-routing

no

show logging level session-mgr

no

show logging level sflow

no

show logging level smartc

no

show logging level smm

no

show logging level snmpd

no

show logging level snmpmib_proc

no

show logging level spanning-tree

no

show logging level spm

no

show logging level stripcl

no

show logging level sysmgr

no

show logging level tacacs

no

show logging level telemetry

no

show logging level track

no

show logging level tunnel

no

show logging level u2rib

no

show logging level u6rib

no

show logging level udld

no

show logging level ufdm

no

show logging level urib

no

show logging level vdc_mgr

no

show logging level virtual-service

no

show logging level vlan_mgr

no

show logging level vmm

no

show logging level vmtracker

no

show logging level vpc

no

show logging level vrrp-cfg

no

show logging level vrrp-eng

no

show logging level vrrpv3

no

show logging level vsan

no

show logging level vshd

no

show logging level vtp

no

show logging level wwn

no

show logging level xbar

no

show logging logfile

no

show logging logfile duration

no

show logging logfile last-index

no

show logging logfile start-seqn

no

show logging logfile start-time

no

show logging loopback

no

show logging module

no

show logging monitor

no

show logging nvram

yes

show logging onboard

no

show logging onboard kernel-trace

no

show logging origin-id

no

show logging pending

no

show logging pending-diff

no

show logging rate-limit

no

show logging server

yes

show logging session status

no

show logging source-interface

no

show logging status

no

show logging timestamp

no

show login on-failure log

yes

show login on-successful log

yes

show mac address-table

yes

show mac address-table aging-time

yes

show mac address-table count

yes

show mac address-table count es

no

show mac address-table learning-mode

yes

show mac address-table limit

yes

show mac address-table loop-detect

no

show mac address-table multicast

yes

show mac address-table notification mac-move

yes

show mac vdc

yes

show mac-list

yes

show macsec mka

yes

show macsec mka session

yes

show macsec mka statistics

yes

show macsec policy

yes

show macsec secy statistics

yes

show maintenance maint-delay

yes

show maintenance on-reload reset-reasons

yes

show maintenance profile

yes

show maintenance snapshot-delay

yes

show maintenance timeout

yes

show mcectest

yes

show mcectest mcec interface

no

show mgmt-policy

yes

show module

yes

show module bandwidth-fairness

yes

show module supported

no

show module uptime

yes

show monitor

yes

show monitor session

yes

show mpls forwarding statistics

yes

show mpls interfaces

yes

show mpls interfaces detail

yes

show mpls interfaces statistics

yes

show mpls ip bindings

yes

show mpls ip bindings summary

yes

show mpls ip ttl

yes

show mpls label range

yes

show mpls label statistics

no

show mpls oam echo statistics

yes

show mpls static binding

yes

show mpls static binding vrf per-vrf

yes

show mpls static trace

no

show mpls strip labels

yes

show mpls switching

yes

show mpls switching clients

yes

show mvpn bgp mdt

yes

show mvpn mdt encap

yes

show mvpn mdt route

yes

show mvr

yes

show mvr groups

yes

show mvr interface

yes

show mvr members

yes

show mvr members count

yes

show mvr members vlan

yes

show mvr receiver-ports

yes

show mvr source-ports

yes

show nbm controller

yes

show nbm defaults

no

show nbm flow-policy

no

show nbm flows

yes

show nbm flows bandwidth

no

show nbm flows statistics

yes

show nbm flows summary

yes

show nbm host-policy all

no

show nbm host-policy applied

no

show nbm host-policy applied receiver

no

show nbm interface bandwidth

yes

show nbm switch-role

yes

show ngoam acl status

yes

show ngoam actsessions

no

show ngoam interface statistics

yes

show ngoam loopback

yes

show ngoam pathtrace

yes

show ngoam probe

yes

show ngoam role

no

show ngoam traceroute statistics

yes

show ngoam xconnect session

yes

show npv external-interface-usage

yes

show npv flogi-table

yes

show npv status

yes

show npv traffic-map

yes

show npv traffic-usage

no

show ntp access-groups

yes

show ntp authentication-keys

yes

show ntp authentication-status

yes

show ntp information

yes

show ntp logging-status

yes

show ntp peer-status

yes

show ntp peers

yes

show ntp rts-update

yes

show ntp session status

yes

show ntp source

yes

show ntp source-interface

yes

show ntp statistics

yes

show ntp status

yes

show ntp trusted-keys

yes

show nve bfd neighbors

yes

show nve core-links

yes

show nve ethernet-segment

yes

show nve interface

yes

show nve multisite dci-links

yes

show nve multisite fabric-links

yes

show nve peers

yes

show nve peers interface counters

yes

show nve peers vni interface counters

yes

show nve replication-servers

yes

show nve vni

yes

show nve vni counters

yes

show nve vni ingress-replication

yes

show nve vni peer-vtep

yes

show nve vrf

yes

show nve vxlan-params

yes

show nxapi

yes

show nxapi-server logs

no

show object-group

yes

show openflow hardware capabilities

no

show openflow switch

yes

show openflow switch flows

no

show ospfv3

yes

show ospfv3 border-routers

yes

show ospfv3 database

yes

show ospfv3 database database-summary

yes

show ospfv3 database detail

yes

show ospfv3 event-history

no

show ospfv3 event-history detail

no

show ospfv3 ha

yes

show ospfv3 interface

yes

show ospfv3 interface brief

yes

show ospfv3 lsa-content-changed-list

yes

show ospfv3 memory

yes

show ospfv3 neighbors

yes

show ospfv3 neighbors detail

yes

show ospfv3 neighbors summary

yes

show ospfv3 policy statistics

no

show ospfv3 request-list

yes

show ospfv3 retransmission-list

yes

show ospfv3 route

yes

show ospfv3 route summary

yes

show ospfv3 statistics

yes

show ospfv3 summary-address

yes

show ospfv3 traffic

yes

show ospfv3 virtual-links

yes

show ospfv3 virtual-links brief

yes

show otv

no

show param-list

yes

show password secure-mode

yes

show password strength-check

yes

show plb

yes

show plb analytics

yes

show plb session device-group

yes

show plb vrf

yes

show pmap-int

no

show pmap-int-br interface br

yes

show policy-map

yes

show policy-map interface control-plane

yes

show policy-map interface type psp

yes

show policy-map system

yes

show policy-map type control-plane

yes

show policy-map type network-qos

yes

show policy-map type psp

yes

show port naming

no

show port-channel capacity

yes

show port-channel compatibility-parameters

yes

show port-channel database

yes

show port-channel fast-convergence

no

show port-channel load-balance

yes

show port-channel load-balance forwarding-path interface

yes

show port-channel load-balance forwarding-path1 interface src-interface

yes

show port-channel load-balance hardware forwarding-path interface source

yes

show port-channel rbh-distribution

yes

show port-channel summary

yes

show port-channel traffic

yes

show port-channel usage

yes

show port-license

yes

show port-profile

yes

show port-profile brief

yes

show port-profile expand-interface

yes

show port-profile sync-status

yes

show port-profile usage

yes

show port-security

yes

show port-security address

yes

show port-security address blocked

yes

show port-security address interface

yes

show port-security address nvram

yes

show port-security detail interface

yes

show port-security interface

yes

show port-security multivlan address

yes

show port-security secure address

yes

show port-security state

yes

show port-security traps enable

yes

show power inline

yes

show power inline police

yes

show power inline priority

yes

show privilege

no

show processes

yes

show processes cpu

yes

show processes cpu history

no

show processes cpu history data

yes

show processes cpu module

yes

show processes log

yes

show processes log details

yes

show processes log pid

yes

show processes log vdc-all

yes

show processes memory

yes

show processes memory clis

no

show processes memory physical

yes

show processes memory shared

yes

show processes vdc

yes

show processes vdc cpu

yes

show processes vdc log

yes

show processes vdc log details

no

show processes vdc log pid

no

show processes vdc memory

yes

show processes version

yes

show pss debug

no

show ptp brief

yes

show ptp clock

yes

show ptp clock foreign-masters record

yes

show ptp corrections

yes

show ptp cost

yes

show ptp counters interface

yes

show ptp delay summary

yes

show ptp domain data

yes

show ptp interface domain

yes

show ptp packet-trace

yes

show ptp parent

yes

show ptp port interface

yes

show ptp time-property

yes

show qos dcbxp incompatibility interface

yes

show qos dcbxp info

yes

show qos dcbxp interface

yes

show qos shared-policer

yes

show queuing

yes

show queuing burst-detect

yes

show queuing pfc-queue

yes

show queuing pfc-queue interface snmp watchdogIfQueueTable ifIndex

yes

show queuing pfc-queue snmp ifIndex

yes

show queuing tabular

yes

show queuing tah-pfc-queue

yes

show radius status

yes

show radius-cfs

yes

show radius-server

yes

show radius-server directed-request

yes

show radius-server groups

yes

show radius-server sorted

yes

show radius-server statistics

yes

show redundancy status

yes

show regexp

no

show reload

yes

show resource

yes

show rmon

yes

show role

yes

show role feature

yes

show role feature-group

yes

show rollback log exec

yes

show rollback status

yes

show route-map

yes

show route-map pbr-statistics

yes

show router-guard

yes

show routing

yes

show routing clients

yes

show routing event-history

no

show routing hash

yes

show routing hidden-nh

yes

show routing ipv6

yes

show routing ipv6 clients

yes

show routing ipv6 event-history

no

show routing ipv6 hash

yes

show routing ipv6 hidden-nh

yes

show routing ipv6 memory estimate

yes

show routing ipv6 memory statistics

yes

show routing ipv6 multicast

yes

show routing ipv6 multicast clients

yes

show routing ipv6 multicast event-history

no

show routing ipv6 multicast memory estimate

yes

show routing ipv6 nexthop info

no

show routing ipv6 nhlfe

yes

show routing ipv6 recursive-next-hop

yes

show routing memory estimate

yes

show routing memory statistics

yes

show routing multicast

yes

show routing multicast clients

yes

show routing multicast event-history

no

show routing multicast lisp encap

yes

show routing multicast mdt encapsulation

yes

show routing multicast memory estimate

yes

show routing multicast sr

no

show routing nhlfe

yes

show routing recursive-next-hop

yes

show routing unresolved-next-hop

no

show routing vxlan-hash peer-ip

no

show routing-context

yes

show routing-privilege

no

show running-config

no

show running-config aaa

no

show running-config acllog

no

show running-config aclmgr

no

show running-config aclmgr active

no

show running-config adjmgr

no

show running-config all

no

show running-config amt

no

show running-config arp

no

show running-config assoc

no

show running-config backup

no

show running-config bfd

no

show running-config bgp

no

show running-config bloggerd

no

show running-config callhome

no

show running-config catena

no

show running-config cdp

no

show running-config cert-enroll

no

show running-config cfs

no

show running-config clock_manager

no

show running-config config-profile

no

show running-config config-template

no

show running-config controller

no

show running-config copp

no

show running-config dhcp

no

show running-config diagnostic

no

show running-config diff

no

show running-config dot1x

no

show running-config ecp

no

show running-config eem

no

show running-config eigrp

no

show running-config eltm

no

show running-config evb

no

show running-config exclude

no

show running-config exclude fabricpath

no

show running-config expand-port-profile

no

show running-config explicit

no

show running-config fabric forwarding

no

show running-config fabric multicast

no

show running-config fabricpath

no

show running-config fabricpath domain default

no

show running-config fabricpath switch-id

no

show running-config fabricpath topology

no

show running-config fcoe_mgr

no

show running-config hardware-telemetry

no

show running-config hsrp

no

show running-config icam

no

show running-config icmpv6

no

show running-config igmp

no

show running-config imp

no

show running-config interface

no

show running-config interface defaults

no

show running-config interface explicit

no

show running-config ip

no

show running-config ipqos

no

show running-config ipqos active

no

show running-config ipv6

no

show running-config isis

no

show running-config l3vm

no

show running-config ldap

no

show running-config license

no

show running-config lisp

no

show running-config lldp

no

show running-config macsec

no

show running-config mmode

no

show running-config monitor

no

show running-config mpls ldp

no

show running-config mpls static

no

show running-config mpls strip

no

show running-config mpls traffic-eng

no

show running-config msdp

no

show running-config nat

no

show running-config nbm

no

show running-config netflow

no

show running-config ngoam

no

show running-config ntp

no

show running-config nv overlay

no

show running-config nxsdk

no

show running-config openflow

no

show running-config ospf

no

show running-config ospfv3

no

show running-config otv

no

show running-config otv-isis

no

show running-config param-list

no

show running-config pim

no

show running-config pim6

no

show running-config plb-services

no

show running-config poe

no

show running-config port-profile

no

show running-config port-security

no

show running-config ptp

no

show running-config radius

no

show running-config res_mgr

no

show running-config rip

no

show running-config routing ip multicast

no

show running-config routing ipv6 multicast

no

show running-config rpm

no

show running-config rsvp

no

show running-config section

no

show running-config security

no

show running-config segment-routing

no

show running-config services

no

show running-config sflow

no

show running-config sla responder

no

show running-config sla sender

no

show running-config sla twamp-server

no

show running-config smart-channel

no

show running-config snmp

no

show running-config spanning-tree

no

show running-config srte

no

show running-config switch

no

show running-config tacacs

no

show running-config telemetry

no

show running-config track

no

show running-config udld

no

show running-config vdc

no

show running-config vdc-all

no

show running-config virtual-service

no

show running-config vlan

no

show running-config vlan_mgr

no

show running-config vmtracker

no

show running-config vpc

no

show running-config vrf

no

show running-config vrf default

no

show running-config vrrp

no

show running-config vrrpv3

no

show running-config vshd

no

show running-config vtp

no

show running-config wwnm

no

show san-port-channel compatibility-parameters

yes

show san-port-channel consistency

yes

show san-port-channel consistency detail

yes

show san-port-channel database

yes

show san-port-channel summary

yes

show san-port-channel usage

yes

show scheduler config

yes

show scheduler job

yes

show scheduler logfile

yes

show scheduler schedule

yes

show segment-routing

yes

show segment-routing clients

yes

show segment-routing ipv4 connected-prefix-sid-map

yes

show sflow

yes

show sflow statistics

yes

show smart-channel

yes

show snapshots

yes

show snapshots compare

yes

show snapshots compare ipv4routes

yes

show snapshots compare ipv6routes

yes

show snapshots compare summary

yes

show snapshots dump

yes

show snapshots sections

yes

show snmp

yes

show snmp community

yes

show snmp context

yes

show snmp engineID

yes

show snmp group

yes

show snmp host

yes

show snmp mib igmpCacheTable

yes

show snmp mib igmpInterfaceTable

yes

show snmp mib pimCandidateRPTable

yes

show snmp mib pimComponentTable

yes

show snmp mib pimInterfaceTable

yes

show snmp mib pimIpMRouteNextHopTable

yes

show snmp mib pimIpMRouteTable

yes

show snmp mib pimJoinPruneInterval

yes

show snmp mib pimNeighborTable

yes

show snmp mib pimRPSetTable

yes

show snmp nms-statistics

yes

show snmp oid-statistics

yes

show snmp pss

no

show snmp roledebug

no

show snmp sessions

yes

show snmp snmpv3stats

no

show snmp source-interface

yes

show snmp trap

yes

show snmp user

yes

show snmp-dhcp-relay drop statistics

yes

show snmp-dhcp-relay statistics pkt

yes

show snmp-ipv6-dhcp-relay drop statistics

yes

show snmp-ipv6-dhcp-relay statistics pkt

yes

show sockets buffers

no

show sockets client

yes

show sockets connection

yes

show sockets keychain-dump

no

show sockets local-port-range

yes

show sockets ns-port-kiosk

no

show sockets performance

no

show sockets secure-lxc

no

show sockets statistics

yes

show sockets tcp keychain binding

yes

show spanning-tree

yes

show spanning-tree blockedports

yes

show spanning-tree bridge

yes

show spanning-tree inconsistentports

yes

show spanning-tree interface

yes

show spanning-tree issu-impact

yes

show spanning-tree mst

yes

show spanning-tree mst configuration

yes

show spanning-tree mst configuration digest

yes

show spanning-tree mst interface

yes

show spanning-tree pathcost method

yes

show spanning-tree root

yes

show spanning-tree summary

yes

show spanning-tree summary totals

yes

show sprom

yes

show srte pce ipv4 peer

yes

show srte policy

yes

show srte policy fh

no

show ssh key

yes

show ssh server

yes

show ssx details

yes

show ssx exporter

yes

show ssx monitor

yes

show ssx record

yes

show startup-config

no

show startup-config aaa

no

show startup-config acllog

no

show startup-config aclmgr

no

show startup-config adjmgr

no

show startup-config amt

no

show startup-config arp

no

show startup-config assoc

no

show startup-config backup

no

show startup-config bfd

no

show startup-config bgp

no

show startup-config bloggerd

no

show startup-config callhome

no

show startup-config catena

no

show startup-config cdp

no

show startup-config cert-enroll

no

show startup-config cfs

no

show startup-config config-profile

no

show startup-config copp

no

show startup-config dhcp

no

show startup-config diagnostic

no

show startup-config dot1x

no

show startup-config ecp

no

show startup-config eem

no

show startup-config eigrp

no

show startup-config eltm

no

show startup-config evb

no

show startup-config exclude

no

show startup-config expand-port-profile

no

show startup-config fabric forwarding

no

show startup-config fabric multicast

no

show startup-config fabricpath

no

show startup-config fabricpath domain default

no

show startup-config fabricpath switch-id

no

show startup-config fabricpath topology

no

show startup-config fcoe_mgr

no

show startup-config glbp

no

show startup-config hardware-telemetry

no

show startup-config hsrp

no

show startup-config icam

no

show startup-config icmpv6

no

show startup-config igmp

no

show startup-config imp

no

show startup-config interface

no

show startup-config ip

no

show startup-config ipqos

no

show startup-config ipv6

no

show startup-config isis

no

show startup-config l3vm

no

show startup-config ldap

no

show startup-config license

no

show startup-config lisp

no

show startup-config lldp

no

show startup-config log

no

show startup-config macsec

no

show startup-config mmode

no

show startup-config monitor

no

show startup-config mpls ldp

no

show startup-config mpls static

no

show startup-config mpls strip

no

show startup-config mpls traffic-eng

no

show startup-config msdp

no

show startup-config nat

no

show startup-config nbm

no

show startup-config netflow

no

show startup-config ngoam

no

show startup-config ntp

no

show startup-config nv overlay

no

show startup-config nxsdk

no

show startup-config openflow

no

show startup-config ospf

no

show startup-config ospfv3

no

show startup-config otv

no

show startup-config otv-isis

no

show startup-config param-list

no

show startup-config pim

no

show startup-config pim6

no

show startup-config plb-services

no

show startup-config poe

no

show startup-config port-profile

no

show startup-config port-security

no

show startup-config ptp

no

show startup-config radius

no

show startup-config rip

no

show startup-config routing ip multicast

no

show startup-config routing ipv6 multicast

no

show startup-config rpm

no

show startup-config rsvp

no

show startup-config security

no

show startup-config segment-routing

no

show startup-config services

no

show startup-config sflow

no

show startup-config sla responder

no

show startup-config sla sender

no

show startup-config sla twamp-server

no

show startup-config smart-channel

no

show startup-config snmp

no

show startup-config srte

no

show startup-config switch

no

show startup-config tacacs

no

show startup-config telemetry

no

show startup-config track

no

show startup-config udld

no

show startup-config vdc

no

show startup-config vdc-all

no

show startup-config virtual-service

no

show startup-config vlan

no

show startup-config vmtracker

no

show startup-config vpc

no

show startup-config vrf

no

show startup-config vrf default

no

show startup-config vrrpv3

no

show startup-config vshd

no

show startup-config vtp

no

show startup-config wwnm

no

show summary

no

show sup-monitor drops session

no

show switch-profile

yes

show switch-profile buffer

yes

show switch-profile peer

yes

show switch-profile status

yes

show switch-scope controller

no

show switching-mode

yes

show switching-mode fabric-speed

yes

show system acl

yes

show system auto-collect tech-support

yes

show system boottime

yes

show system clis event-history

no

show system config reload-pending

yes

show system cores

yes

show system default switchport

yes

show system dme status

yes

show system error-id

yes

show system exception-info

yes

show system fabric-mode

yes

show system fast-reload stabilization-timer

yes

show system inband queuing statistics

yes

show system inband queuing status

yes

show system kgdb

no

show system login

yes

show system login failures

yes

show system memory-thresholds

yes

show system mode

yes

show system nve infra-vlans

yes

show system pss shrink status

yes

show system redundancy ha status

yes

show system redundancy status

yes

show system reset-reason

yes

show system reset-reason module

yes

show system resources

no

show system resources

yes

show system resources module

no

show system resources module all

yes

show system routing mode

yes

show system srg

no

show system standby manual-boot

yes

show system switch-mode

yes

show system switchover impact

no

show system uptime

yes

show system verify bios flash

yes

show system vlan reserved

yes

show table-map

yes

show tacacs-server

yes

show tacacs-server directed-request

yes

show tacacs-server groups

yes

show tacacs-server sorted

yes

show tacacs-server statistics

yes

show tech-support

no

show tech-support aaa

no

show tech-support aclmgr

no

show tech-support aclmgr compressed

no

show tech-support aclqos

no

show tech-support aclqos compressed

no

show tech-support adjmgr

no

show tech-support all

no

show tech-support all binary

no

show tech-support all-binary

no

show tech-support analytics

no

show tech-support arp

no

show tech-support ascii-cfg

no

show tech-support assoc_mgr

no

show tech-support backup

no

show tech-support bcm

no

show tech-support bfd

no

show tech-support bgp

no

show tech-support biosd

no

show tech-support bloggerd

no

show tech-support bloggerd-all

no

show tech-support bootvar

no

show tech-support brief

no

show tech-support callhome

no

show tech-support cdp

no

show tech-support cert-enroll

no

show tech-support cfs

no

show tech-support cli

no

show tech-support clis

no

show tech-support clock_manager

no

show tech-support commands

no

show tech-support controller

no

show tech-support copp

no

show tech-support dcbx

no

show tech-support details

no

show tech-support dhclient

no

show tech-support dhcp

no

show tech-support dme

no

show tech-support dot1x

no

show tech-support ecp

no

show tech-support eem

no

show tech-support eigrp

no

show tech-support eltm

no

show tech-support ethpm

no

show tech-support ethport

no

show tech-support evb

no

show tech-support fabric forwarding

no

show tech-support fabric multicast

no

show tech-support fabricpath isis

no

show tech-support fabricpath topology

no

show tech-support fast-reload

no

show tech-support fc2

no

show tech-support fcoe

no

show tech-support fips

no

show tech-support forwarding l2 multicast

no

show tech-support forwarding l2 multicast vdc-all

no

show tech-support forwarding l2 unicast

no

show tech-support forwarding l3 multicast

no

show tech-support forwarding l3 multicast detail

no

show tech-support forwarding l3 multicast detail vdc-all

no

show tech-support forwarding l3 multicast vdc-all

no

show tech-support forwarding l3 unicast

no

show tech-support forwarding l3 unicast detail

no

show tech-support forwarding l3 unicast detail vdc-all

no

show tech-support forwarding l3 unicast vdc-all

no

show tech-support forwarding mpls

no

show tech-support forwarding multicast

no

show tech-support gold

no

show tech-support gpixm

no

show tech-support ha

no

show tech-support ha module

no

show tech-support ha standby

no

show tech-support hardware-telemetry

no

show tech-support hsrp

no

show tech-support hsrp brief

no

show tech-support icam

no

show tech-support icmpv6

no

show tech-support im

no

show tech-support imp

no

show tech-support inband counters

no

show tech-support include-time

no

show tech-support install

no

show tech-support interface-vlan

no

show tech-support ip

no

show tech-support ip igmp

no

show tech-support ip igmp snooping

no

show tech-support ip msdp

no

show tech-support ip pim

no

show tech-support ip rsvp

no

show tech-support ipqos

no

show tech-support ipv6

no

show tech-support ipv6 mld

no

show tech-support ipv6 multicast

no

show tech-support ipv6 pim

no

show tech-support isis

no

show tech-support issu

no

show tech-support kstack

no

show tech-support l2

no

show tech-support l2fm

no

show tech-support l2fm clients

no

show tech-support l2fm detail

no

show tech-support l2fm l2dbg

no

show tech-support l2rib

no

show tech-support l3vm

no

show tech-support l3vpn

no

show tech-support lacp

no

show tech-support ldap

no

show tech-support license

no

show tech-support lim

no

show tech-support lisp

no

show tech-support lldp

no

show tech-support logging

no

show tech-support m2rib

no

show tech-support macsec

no

show tech-support macsec detail

no

show tech-support mfwd

no

show tech-support mmode

no

show tech-support module

no

show tech-support module all

no

show tech-support monitor

no

show tech-support monitor erspan

no

show tech-support monitorc-all

no

show tech-support mpls ldp

no

show tech-support mpls manager

no

show tech-support mpls static

no

show tech-support mpls strip

no

show tech-support mpls switching

no

show tech-support mpls traffic-eng

no

show tech-support mplsfwd

no

show tech-support multicast

no

show tech-support multicast-vxlan-evpn

no

show tech-support mvpn

no

show tech-support nat

no

show tech-support nbm

no

show tech-support netflow

no

show tech-support netstack

no

show tech-support netstack detail

no

show tech-support ngoam

no

show tech-support npacl

no

show tech-support npv

no

show tech-support ns

no

show tech-support ntp

no

show tech-support nve

no

show tech-support nxapi

no

show tech-support nxsdk

no

show tech-support object-store

no

show tech-support openflow

no

show tech-support ospf

no

show tech-support ospfv3

no

show tech-support otv

no

show tech-support page

no

show tech-support patch

no

show tech-support pbr

no

show tech-support pfstat

no

show tech-support pixm

no

show tech-support pixm-all

no

show tech-support pixmc-all

no

show tech-support pktmgr

no

show tech-support platform

no

show tech-support platform-sdk

no

show tech-support plb-services

no

show tech-support plcmgr

no

show tech-support pltfm-config

no

show tech-support poe

no

show tech-support port

no

show tech-support port-channel

no

show tech-support port-client-all

no

show tech-support port-profile

no

show tech-support port-security

no

show tech-support private-vlan

no

show tech-support ptp

no

show tech-support radius

no

show tech-support rip

no

show tech-support routing

no

show tech-support routing ipv6

no

show tech-support routing ipv6 multicast

no

show tech-support routing multicast

no

show tech-support rpm

no

show tech-support sal

no

show tech-support san

no

show tech-support san-port-channel

no

show tech-support satmgr

no

show tech-support security

no

show tech-support segment-routing

no

show tech-support services

no

show tech-support session-mgr

no

show tech-support sflow

no

show tech-support single-jericho

no

show tech-support sksd

no

show tech-support sla responder

no

show tech-support sla sender

no

show tech-support sla twamp-server

no

show tech-support smartc

no

show tech-support smm

no

show tech-support snmp

no

show tech-support sockets

no

show tech-support spm

no

show tech-support srte

no

show tech-support statsclient

no

show tech-support stp

no

show tech-support sup-filesys

no

show tech-support sysmgr

no

show tech-support tacacs

no

show tech-support telemetry

no

show tech-support track

no

show tech-support tunnel

no

show tech-support u2rib

no

show tech-support udld

no

show tech-support usd-all

no

show tech-support vdc

no

show tech-support virtual-service

no

show tech-support vlan

no

show tech-support vmtracker

no

show tech-support vpc

no

show tech-support vrrp

no

show tech-support vrrp brief

no

show tech-support vrrpv3

no

show tech-support vsan

no

show tech-support vshd

no

show tech-support vtp

no

show tech-support vvlan

no

show tech-support vxlan

no

show tech-support vxlan platform

no

show tech-support vxlan-evpn

no

show tech-support xbar

no

show tech-support xml

no

show tech-support xos

no

show telemetry control database

yes

show telemetry data collector brief

yes

show telemetry event collector stats

yes

show telemetry pipeline stats

yes

show telemetry transport

yes

show telnet server

yes

show terminal

yes

show terminal output xml version

yes

show time-range

yes

show time-stamp running-config last-changed

yes

show track

yes

show track brief

yes

show troubleshoot l2 mac vlan

no

show troubleshoot l3 ipv4 vrf

no

show trunk protocol

yes

show ttag brief

yes

show tunnel iftable

yes

show tunnel inetconfigtable

yes

show udld

yes

show udld global

yes

show udld neighbors

yes

show ulib process

no

show user-account

yes

show username keypair

yes

show userpassphrase

yes

show users

yes

show vdc

yes

show vdc current-vdc

yes

show vdc fcoe-vlan-range

yes

show vdc resource

yes

show vdc resource template

yes

show version

yes

show version compatibility

no

show version epld

yes

show version image

yes

show version module

yes

show version module epld

yes

show virtual-service

yes

show virtual-service storage pool list

yes

show virtual-service tech-support

no

show virtual-service utilization name

yes

show virtual-service version

yes

show vlan

yes

show vlan access-list

yes

show vlan access-map

yes

show vlan all-ports

yes

show vlan counters

yes

show vlan dot1Q tag native

yes

show vlan fcoe

yes

show vlan filter

yes

show vlan id

yes

show vlan id counters

yes

show vlan id vn-segment

yes

show vlan mib private-vlan type

yes

show vlan name

yes

show vlan private-vlan

yes

show vlan private-vlan interface host

yes

show vlan private-vlan interface mapping

yes

show vlan private-vlan interface mode

yes

show vlan private-vlan interface trunk

yes

show vlan private-vlan mapping

yes

show vlan private-vlan type

yes

show vlan reserved

yes

show vlan xbrief

yes

show vlan xsummary

yes

show vlan-mgr errors

no

show vlan-mgr event-history

no

show vmtracker

no

show vmtracker certificate

no

show vmtracker fabric auto-config

no

show vmtracker status

yes

show vni hardware counters

no

show vpc

yes

show vpc consistency-parameters

yes

show vpc consistency-parameters vlans

yes

show vpc orphan-ports

yes

show vpc peer-keepalive

yes

show vpc role

yes

show vpc statistics peer-keepalive

yes

show vpc statistics vpc

no

show vpc upgrade

yes

show vrf

yes

show vrf

no

show vrf topology

yes

show vrrp

yes

show vrrp bfd-sessions

yes

show vrrpv3

yes

show vrrs client

yes

show vrrs pathway

yes

show vrrs pathway address

no

show vrrs server

yes

show vrrs tag

yes

show vsan

yes

show vsan membership

yes

show vsan membership interface

yes

show vsan usage

yes

show vtp counters

yes

show vtp datafile

no

show vtp domain id

yes

show vtp interface

yes

show vtp mibstats

yes

show vtp password

yes

show vtp status

yes

show vtp trunk interface

yes

show vtp vlan

yes

show wred-queue qos-group-map

yes

show wrr unicast-bandwidth

yes

show wrr-queue qos-group-map

yes

show wwn interface

no

show wwn status

yes

show wwn switch

yes

show wwn test

no

show wwn vsan

no

show wwn vsan-wwn

yes

show xml server logging configuration

no

show xml server status

yes

Preface

This preface includes the following sections:

- Audience

- Documentation Conventions

- Documentation Feedback

- Communications, Services, and Additional Information

Audience

This publication is for network administrators who install, configure, and maintain Cisco Nexus switches.

Documentation Conventions

Command descriptions use the following conventions:

Convention

Description

bold

Bold text indicates the commands and keywords that you enter literally as shown.

Italic

Italic text indicates arguments for which the user supplies the values.

[x]

Square brackets enclose an optional element (keyword or argument).

[x | y]

Square brackets enclosing keywords or arguments separated by a vertical bar indicate an optional choice.

{x | y}

Braces enclosing keywords or arguments separated by a vertical bar indicate a required choice.

[x {y | z}]

Nested set of square brackets or braces indicate optional or required choices within optional or required elements. Braces and a vertical bar within square brackets indicate a required choice within an optional element.

variable

Indicates a variable for which you supply values, in context where italics cannot be used.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

Examples use the following conventions:

Convention

Description

screen font

Terminal sessions and information the switch displays are in screen font.

boldface screen font

Information you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

< >

Nonprinting characters, such as passwords, are in angle brackets.

[ ]

Default responses to system prompts are in square brackets.

!, #

An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.

Documentation Feedback

To provide technical feedback on this document, or to report an error or omission, please send your comments to . We appreciate your feedback.

Communications, Services, and Additional Information

- To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.

- To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.

- To submit a service request, visit Cisco Support.

- To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.

- To obtain general networking, training, and certification titles, visit Cisco Press.

- To find warranty information for a specific product or product family, access Cisco Warranty Finder.

Cisco Bug Search Tool

Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.