Dial Screen

Available Languages

Download Options

  • PDF     (170.2 KB)
    View with Adobe Reader on a variety of devices
Updated:September 16, 2010

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Dial Screen

Table Of Contents

Dial Screen


Dial Screen

Revised: September, 2010, OL-21702-01

The Dial Screen allows you the option to manually dial a number to establish a Cisco Telepresence call.

Figure 4-1 Dial Screen

Table 4-1 shows available Dial Screen softkeys.

Table 4-1 Dialing Screen Softkeys

Navigation Type
Description
Softkey

Dial

Enter the number in the box marked "Number To Dial" then touch Dial.

<<

Backspace command.

Exit

Exits the screen.


Related Information

See the Cisco TelePresence System User Guide for more information about using the Cisco TelePresence System and the CTS Cisco Unified IP Phone.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco