Headset Screen

Available Languages

Download Options

  • PDF     (178.0 KB)
    View with Adobe Reader on a variety of devices
Updated:September 16, 2010

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Headset Control Screen

Table Of Contents

Headset Control Screen


Headset Control Screen

Revised: September, 2010, OL-21702-01

The Headset Control Screen allows you to switch between a headset device and the integrated Cisco TelePresence System (CTS) Cisco Unified IP Phone speaker.

Figure 9-1 Headset Control Screen

Table 9-1 shows available Headset Settings Screen buttons and softkeys.

Table 9-1 Headset Settings Screen Buttons and Softkeys

Navigation Type
Description
Button
Headset

•Touch to enable.

•Touch to disable.

Speaker

•Touch to enable.

•Touch to disable.

 
Softkey

Save

Saves your current headset setting.

Exit

Exits the current Screen to go to the previous one (Manual Idle Screen).


Related Information

See the Cisco TelePresence System User Guide for more information about using the Cisco TelePresence System and the CTS Cisco Unified IP Phone.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco