|
|
|
|
|
Connected indication |
Sound |
|
Single participant |
a participant first connects to a meeting |
Enter meeting PIN |
Thank you for attending the meeting. Enter the meeting PIN followed by the pound sign. |
Enter PIN code |
Single participant |
a participant connects to a PIN-protected meeting (played after the Connected indication sound) |
Wrong PIN, disconnecting |
Incorrect PIN. Disconnecting. |
Incorrect PIN code. Disconnecting... |
Single participant |
a participant tries to join a PIN-protected meeting after entering the wrong PIN three times in a row |
Wrong PIN, enter a valid one. |
Incorrect PIN. Enter the correct PIN followed by the pound sign. |
Incorrect PIN code. Enter PIN code. |
Single participant |
a participant tries to join a PIN-protected meeting after entering the wrong PIN (less than three times in a row) |
First participant in meeting |
Thank you for attending the meeting. You are the first participant. Please hold. |
|
Single participant |
the first participant joins the meeting (after the Connected Indication and the Enter meeting PIN messages) |
First participant and moderator |
Thank you for attending the meeting. You are the first participant. You have moderation privileges. |
|
Single participant |
the first participant joined the meeting using the moderator PIN instead of the meeting PIN |
New participant joined |
Tone |
|
All participants |
a new participant has joined the meeting |
Participant left |
Tone |
|
All participants |
a participant has left the meeting |
Success indication |
Tone |
|
Single participant |
a DTMF command has succeeded |
Enter party number |
To dial out, please dial the number of the party you wish to invite to the meeting, followed by the pound sign. |
|
Single participant |
you are in invite mode (after dialing *8 via DTMF) and you do not dial any number for a period of time |
Error indication |
Tone |
|
Single participant |
a DTMF command has failed |
Moderator privileges required |
This action requires moderator privileges. |
|
Single participant |
you perform a DTMF command that requires moderator privileges without first becoming a moderator |
Another moderator exists |
Another participant is already moderating the meeting. |
|
Single participant |
you try to become the moderator via DTMF, but there is already another moderator for the meeting |
Meeting control menu |
To return to the meeting - press pound. To become the moderator - press 1. To mute or unmute your line - press 2. To control the volume of your line - press 3. To show or hide participants' names - press 4. |
|
Single participant |
you are in DTMF command mode (after dialing * or ** via DTMF) and you do not enter any command for a period of time |
Meeting control menu (personal layout disabled) |
To return to the meeting - press pound. To become the moderator - press 1. To mute or unmute your line - press 2. To control the volume of your line - press 3. |
|
Single participant |
you are in DTMF command mode (after dialing * or ** via DTMF) and you do not enter any command for a period of time |
Enter moderator PIN |
Enter the moderator PIN followed by the pound sign. |
|
Single participant |
you try to become the moderator via DTMF and a moderator PIN is defined |
Moderator menu |
To return to the meeting - press pound. To stop moderating - press 1. To mute or unmute your line - press 2. To control the volume of your line - press 3. To show or hide participants' names - press 4. To terminate the meeting - press 5. To change the main video layout - press 6. To block admission to the meeting - press 7. To dial out - press 8. To mute/unmute all lines except yourself - press 9. |
|
Single participant |
you are in DTMF moderator mode (i.e. after becoming the moderator via DTMF) and you do not enter any command for a period of time |
Moderator menu (blocked meeting) |
To return to the meeting - press pound. To stop moderating - press 1. To mute or unmute your line - press 2. To control the volume of your line - press 3. To show or hide participants' names - press 4. To terminate the meeting - press 5. To change the main video layout - press 6. To allow admission to the meeting - press 7. To dial out - press 8. To mute/unmute all lines except yourself - press 9. |
|
Single participant |
you are in DTMF moderator mode (i.e. after becoming the moderator via DTMF) in a meeting whose admission is blocked and you do not enter any command for a period of time |
Join sub-conference |
You have joined a sub-conference. |
|
Single participant |
a participant joins a sub-conference |
Leave sub-conference |
You have left the sub-conference. |
|
Single participant |
a participant leaves a sub-conference |
Join not allowed |
For security reasons, please join from the MeetingPlace web conferencing interface. Goodbye. |
|
|
Reserved for Cisco Unified MeetingPlace |
No video resources |
All video resources are currently in use. Please try again later. |
|
|
Reserved for Cisco Unified MeetingPlace |
Meeting terminating |
The meeting is about to terminate. |
|
All participants |
a meeting is about to terminate |
Organizer not yet joined |
Please wait for the meeting moderator. |
|
Single participant |
you join a meeting in a waiting room mode before the moderator has joined |
Organizer joined, meeting starts |
The meeting will now begin. |
|
All participants |
the moderator joins a meeting in waiting room mode |
Organizer left, meeting paused |
You have been moved to the waiting room, please wait. |
|
All participants |
the moderator leaves a meeting in waiting room mode |
Organizer back, meeting resumed |
The meeting will now resume. |
|
All participants |
the moderator returns to a meeting in waiting room mode |
Wrong moderator PIN |
You have entered an incorrect moderator PIN. |
|
Single participant |
you have entered the wrong moderator PIN |
You are the moderator |
You are now the moderator. |
|
Single participant |
you have become the moderator of the meeting via DTMF |
Muted |
Muted |
|
Single participant |
you mute yourself via DTMF |
Unmuted |
Unmuted |
|
Single participant |
you unmute yourself via DTMF |
Volume control menu |
To decrease the volume, press zero. To increase, press one. |
|
Single participant |
you are in volume control mode (after dialing *3 via DTMF) and you do not enter any command for a period of time |
Meeting admission blocked |
Admission to the meeting is now blocked. |
|
Single participant |
you block admission to the meeting via DTMF |
Meeting admission allowed |
Admission to the meeting is now allowed. |
|
Single participant |
you allow admission to the meeting via DTMF |
Dialing |
Dialing. |
|
Single participant |
you invite a participant via DTMF |
Invalid input |
Invalid input. |
|
Single participant |
you press an invalid key during a DTMF command |
Stopped moderating |
You are no longer the meeting moderator. |
|
Single participant |
you have stopped moderating the meeting via DTMF |
Change layout menu |
Change layout. Please enter the number of participants to be seen on the screen or press zero for automatic layout. |
|
Single participant |
you are in change layout mode (after dialing *6 via DTMF) and you do not enter any command for a period of time |
Mute/Unmute All menu |
To mute all participants except yourself, press zero. To un-mute all participants, press 1. |
|
Single participant |
you are in mute/unmute all mode (after dialing *9 via DTMF) and you do not enter any command for a period of time |
All muted |
All participants are now muted. |
|
Single participant |
you mute all participants via DTMF |
All unmuted |
All participants are now unmuted. |
|
Single participant |
you unmute all participants via DTMF |
Silent |
|
|
|
|
Meeting selection |
Thank you for calling. To create a new meeting or join by ID, press nine. To select a meeting from the list, press the entry number. |
|
Single participant |
you dial the MCU Auto Attendant (with video) |
Enter meeting ID |
Enter the meeting ID followed by the pound sign. |
Enter meeting ID |
Single participant |
you choose to create or join a meeting by ID during an Auto Attendant session, or when you dial the MCU Auto Attendant with audio only |
Invalid meeting ID |
You have entered an incorrect meeting ID. |
The meeting ID is invalid. |
Single participant |
you enter an invalid meeting ID during an Auto Attendant session |
Create meeting PIN |
To create a PIN code to protect this meeting, enter a PIN code followed by the pound sign. Enter only the pound sign if you do not want PIN protection. |
Creating a new meeting Enter PIN code (optional) |
Single participant |
you choose to create a new meeting during an Auto Attendant session |
Create meeting failed |
Failed to create a meeting. |
Failed to create a meeting -[reason]. To join an existing meeting enter meeting ID Reason is one of: •No resources •Not allowed •Other When the reason is "other", no reason is displayed. |
Single participant |
during Auto Attendant session, when meeting creation fails. Possible reasons: No resources—MCU is out of resources Not allowed—MCU is configured to disallow meeting creation by dial-in. |
Create meeting - invalid PIN code |
You have entered an invalid PIN. Enter a valid PIN using digits only followed by the pound sign. |
The PIN code is invalid. Enter valid PIN code. |
Single participant |
during Auto Attendant session, when creating a new meeting and entering an invalid meeting PIN code (PIN code should be digits only) |
Failed to connect to the meeting |
Failed to connect to the meeting. Disconnecting. |
Failed to connect to the meeting -[reason]. Reason is one of: •No endpoint support •Other When the reason is "other", no reason is displayed. |
Single participant |
during Auto Attendant session, after user has selected a meeting, when the transfer to the selected meeting fails |
Invalid meeting ID - try again |
You have entered an incorrect meeting ID. Please enter your meeting ID followed by the pound sign. |
|
Single participant |
during Auto Attendant session, after user has entered an invalid meeting ID |
Create meeting failed - reenter meeting |
Failed to create a meeting. To join an existing meeting, enter your meeting ID followed by the pound sign. |
|
Single participant |
during Auto Attendant session, after meeting creation has failed (audio only caller) |
Meeting ends in 10 min |
The meeting is about to end in less than ten minutes. |
|
|
during a scheduled conference, 10 minutes before the meeting is about to end |
Meeting ends in 5 min |
The meeting is about to end in less than five minutes. |
|
|
during a scheduled conference, 5 minutes before the meeting is about to end |
Meeting ends in 2 min |
The meeting is about to end in less than two minutes. |
|
|
during a scheduled conference, 2 minutes before the meeting is about to end |
Meeting end in 1 min |
The meeting is about to end in less than one minute. |
|
|
during a scheduled conference, 1 minute before the meeting is about to end |
Disconnecting |
Disconnecting |
|
|
during an auto-attendant session, when the user is expected to enter an input, no input has been detected and the user is being disconnected from the session |
No Input from user |
I did not hear your entry. |
|
|
during an auto-attendant session, when the user is expected to enter an input and no input has been detected |
No video resources, connected as audio only |
You are connected with audio only due to resource limitations. Please contact your system administrator if needed. |
|
|
there are no video resources and the participant connected using audio only |
Termination due to failure |
The meeting is about to terminate due to a temporary failure. Please redial the meeting ID and report the incident to your system administrator. |
|
|
during a scheduled conference, when a failure has occurred and the meeting is terminated |
Meeting extended automatically |
The meeting has been automatically extended. |
|
|
during a scheduled conference, when the meeting has been automatically extended |
Meeting extended by moderator |
The meeting has been extended by the moderator. |
|
|
during a scheduled conference, when the meeting has been extended by the moderator |
Please hold |
Thank you, please hold. |
|
|
during an auto-attendant session, when the user is being transferred to the chosen conference |