Cisco ATA 191 and 192 Analog Telephone Adapter Multiplatform Phones Release Notes for Firmware Release 11.1(0)SR2

Release Notes for Cisco ATA 191 and 192 Analog Telephone Adapter for Multiplatform Firmware Release 11.1(0)SR2

These release notes support the Cisco ATA 191 and 192 Analog Telephone Adapter Multiplatform Phones running Multiplatform Firmware Release 11.1(0)SR2.

The following table lists the support and protocol compatibility for the Cisco ATA.

Cisco IP Phones, Support, and Firmware Release Compatibility

Cisco IP Phone

Protocol

Support Requirements

Cisco ATA 191 and 192

SIP

BroadSoft BroadWorks 21.0

Asterisk 13.1

Related Documentation

Use the following sections to obtain related information.

- Cisco ATA 190 Series Documentation

Cisco ATA 190 Series Documentation

Refer to publications that are specific to your language and call control system. Navigate from the following documentation URL:

https://www.cisco.com/c/en/us/products/unified-communications/ata-190-series-analog-telephone-adapters/index.html

Installation

- Upgrade Firmware

Upgrade Firmware

The Cisco ATA 191 and 192 support dual image upgrades by TFTP, HTTP, or HTTPS.

Procedure

Step 1

Go to the following URL:

https://software.cisco.com/download/navigator.html?mdfid=286282490&flowid=83468

Step 2

Choose Cisco ATA 190 Series.

Step 3

Choose your ATA model.

Step 4

In the Latest Releases folder, choose 11.1.0 MSR2.

Step 5

Download the file ATA19x.11-1-0MSR2.zip.

Step 6

Unzip the files.

Step 7

Put the files on the tftp/http/https download directory.

Step 8

Configure the Upgrade Rule on the Provisioning tab in the web page with the valid URL. The format is:

<schema>://<serv_ip[:port]>/filepath/sipxxx.loads

The third-party call control can also upgrade with a URL in the web browser:

<schema>://<serv_ip[:port]>/filepath/sipxxx.loads

Here is an example,

http://10.74.10.225/firmware/sipXXX.XX-0-0MPP-XXdev.loads

Note

The loads file is put in the file path of the above url. The zip file contains other file types also. Only the loads file is used in the above URL.

After the firmware upgrade completes, the phone reboots automatically.

Caveats

- View Caveats

- Open Caveats

- Resolved caveats

- Access Cisco Bug Search

View Caveats

You can search for caveats using the Cisco Bug Search.

Known caveats (bugs) are graded according to severity level, and can be either open or resolved.

Before you begin

To view caveats, you need the following items:

- Internet connection

- Web browser

- Cisco.com user ID and password

Procedure

Step 1

Perform one of the following actions:

- Use this URL for all open caveats:https://bst.cloudapps.cisco.com/bugsearch/search?kw=Customer%20visible%20bug%20for%20MPP%20ATA191/192%2011-1-0%20SR2&pf=prdNm&sb=null&sts=open&bt=custV

- Use this URL for all resolved caveats: https://bst.cloudapps.cisco.com/bugsearch/search?kw=Customer%20visible%20bug%20for%20MPP%20ATA191/192%2011-1-0%20SR2&pf=prdNm&sb=null&sts=fd&bt=custV

- Use this URL for all caveats: https://bst.cloudapps.cisco.com/bugsearch/search?kw=Customer%20visible%20bug%20for%20MPP%20ATA191/192%2011-1-0%20SR2&pf=prdNm&sb=anfr&bt=custV

Step 2

When prompted, log in with your Cisco.com user ID and password.

Step 3

(Optional) Enter the bug ID number in the Search for field, then press Enter.

Open Caveats

The following list contains severity 1, 2, and 3 defects that are open for the Cisco ATA 191 and 192 Analog Telephone Adapter Multiplatform Phones for Firmware Release 11.1(0)SR2.

For more information about an individual defect, access the Bug Search toolkit and search for the defect using the Identifier. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, the list reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in Access Cisco Bug Search.

- CSCvg01656: DUT connect to half duplex Ethernet port can't link up after power on

Resolved caveats

The following list contains severity 1, 2, and 3 defects that are resolved for the Cisco ATA 191 and 192 Analog Telephone Adapter Multiplatform Phones for Firmware Release 11.1(0)SR2.

For more information about an individual defect, access the Bug Search toolkit and search for the defect using the Identifier. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, the list reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in Access Cisco Bug Search.

- CSCvk44618: MPP-ATA191/192 need SNI support

- CSCvk63661: T.38 fax call will fail when SIP transport is TLS.

Access Cisco Bug Search

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of the following:

- All severity level 1 or 2 bugs

- Significant severity level 3 bugs

You can search for problems by using Cisco Bug Search.

Before you begin

To access Cisco Bug Search, you need the following items:

- Internet connection

- Web browser

- Cisco.com user ID and password

Procedure

Step 1

To access Cisco Bug Search, go to:

https://tools.cisco.com/bugsearch

Step 2

Log in with your Cisco.com user ID and password.

Step 3

To look for information about a specific problem, enter the bug ID number in the Search for field, then press Enter.

Limitations and Restrictions

- Phone Behavior During Times of Network Congestion

- Caller Identification and Other Phone Functions

Phone Behavior During Times of Network Congestion

Anything that degrades network performance can affect phone voice and video quality, and in some cases, can cause a call to drop. Sources of network degradation can include, but are not limited to, the following activities:

- Administrative tasks, such as an internal port scan or security scan

- Attacks that occur on your network, such as a Denial of Service attack

Caller Identification and Other Phone Functions

Caller identification or other phone functions have not been verified with third-party applications for the visually or hearing impaired.

Cisco IP Phone Firmware Support Policy

For information on the support policy for phones, see https://cisco.com/go/phonefirmwaresupport.

Introduction

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by using one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED "AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: http://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)