Device Information
|
Registration
|
Specifies
the registration status of the
Webex
remote device.
|
Device
Status
|
Specifies
if the device is active or inactive.
|
Device
Trust
|
Specifies
whether the device is trusted or not trusted.
|
Active
Remote Destination
|
Specifies
if the remote destination is active. The
Webex
client has only one active remote destination by default. All incoming calls
are routed to the active remote destination. This field is to none even though
it is associated to an active remote destination.
|
Owner User
ID
|
From the
drop-down list, choose the user ID of the assigned phone user. The user ID gets
recorded in the call detail record (CDR) for all calls made from this device.
|
Device
Name
|
Specifies
the name for the
Webex
remote device that is automatically populated based on the Owner User ID.
The format
of the device name is
SparkRD<OwnerUserID> by default. The default device
name
SparkRD must not be changed.
This field
is editable. The device name can comprise up to 15 characters. Valid characters
include letters, numbers, dashes, dots (periods), spaces, and underscores.
|
Description
|
Enter a
text description of the
Webex
remote device.
This field
can contain up to 128 characters. You can use all characters except quotes (“),
close angle bracket (>), open angle bracket (<), backslash (\), ampersand
(&), and percent sign (%).
|
Device
Pool
|
Select the
device pool which defines the common characteristics for
Webex
remote devices.
For more
information on how to configure the device pool, see Device Pool Configuration
Settings.
|
Calling
Search Space
|
From the
drop-down list, choose the calling search space or leave the calling search
space as the default of <None>.
|
User Hold
MOH Audio Source
|
From the drop-down list, choose the audio source to use for music on hold (MOH) when you initiate a hold action.
Caution
|
MOH is currently not supported for Cisco Spark remote device as Hold/Resume feature on the device is not implemented.
|
|
Network
Hold MOH Audio Source
|
From the drop-down list, choose the audio source to use for MOH when the network initiates a hold action.
Caution
|
MOH is currently not supported for Cisco Spark remote device as Hold/Resume feature on the device is not implemented.
|
|
Location
|
From the
drop-down list, choose the location that is associated with the phones and
gateways in the device pool.
|
Calling
Party Transformation CSS
|
This
setting allows you to localize the calling party number on the device. Make
sure that the Calling Party Transformation CSS that you choose contains the
calling party transformation pattern that you want to assign to this device
pool.
|
Ignore
Presentation Indicators (internal calls only)
|
Check this
check box to configure call display restrictions on a call-by-call basis. When
this check box is checked, Cisco Unified CM ignores any presentation
restriction that is received for internal calls.
|
Call Routing
Information
|
Inbound and Outbound Calls
Information
|
Calling
Party Transformation CSS
|
This
setting allows you to localize the calling party number on the device. Make
sure that the Calling Party Transformation CSS that you choose contains the
calling party transformation pattern that you want to assign to this device.
|
Use
Device Pool Calling Party Transformation CSS
|
To use
the Calling Party Transformation CSS that is configured in the device pool that
is assigned to this device, check this check box. If you do not check this
check box, the device uses the Calling Party Transformation CSS that you
configured in the
Trunk Configuration window.
|
Protocol Specific
Information
|
Presence
Group
|
Configure this field with the Presence feature.
If you
are not using this application user with presence, leave the default (None)
setting for presence group.
From the
drop-down list, choose a Presence group for the application user. The group
selected specifies the destinations that the application user, such as
IPMASysUser, can monitor.
Caution
|
Presence Group is currently not supported for Cisco Spark
remote device .
|
|
SUBSCRIBE Calling Search Space
|
Supported with the Presence feature, the SUBSCRIBE calling
search space determines how
Cisco Unified Communications Manager routes presence
requests that come from the end user. This setting allows you to apply a
calling search space separate from the call-processing search space for
presence (SUBSCRIBE) requests for the end user.
From the
drop-down list, choose the SUBSCRIBE calling search space to use for presence
requests for the end user. All calling search spaces that you configure in
Cisco Unified Communications Manager Administration display in the SUBSCRIBE
Calling Search Space drop-down list.
If you
do not select a different calling search space for the end user from the
drop-down list, the SUBSCRIBE calling search space defaults to None.
To
configure a SUBSCRIBE calling search space specifically for this purpose, you
can configure a calling search space as you do all calling search spaces.
Caution
|
SUBSCRIBE Calling Search Space is currently not supported for Cisco Spark remote device.
|
|
Rerouting Calling Search Space
|
From the
drop-down list, choose a calling search space to use for rerouting.
The
rerouting calling search space of the referrer is used to find the route to the
refer-to target. When the Refer message fails due to the rerouting calling
search space, the Refer Primitive rejects the request with the “405 Method Not
Allowed” message.
The
redirection (3xx) primitive and transfer feature also uses the rerouting
calling search space to find the redirect-to or transfer-to target.
|
Do Not Disturb
Information
|
|
Do Not
Disturb
|
Check
this check box to enable Do Not Disturb on the remote device.
Caution
|
The
calls are not routed to Cisco Spark clients if the DND option is enabled.
|
Caution
|
Do Not Disturb is currently not supported for Cisco Spark
remote device .
|
|
DND
Option
|
When you
enable DND on the phone, Call Reject option specifies that no incoming call
information gets presented to the user. Depending on how you configure the DND
Incoming Call Alert parameter, the phone may play a beep or display a flash
notification of the call.
Caution
|
Do Not Disturb is currently not supported for Cisco Spark
remote device .
|
|