Generate Trunk Utilization Reports
Only CAR administrators generate the Trunk Utilization report. This report calculates the utilization reports for devices based on the duration of calls that passed through the devices.
You can generate this report on an hourly, daily, or monthly basis. The system calculates the utilization of a trunk for each hour in the selected date range. For example, the system calculates the utilization of a trunk between 11hrs-12hrs, using the formula, (Sum of the duration of calls that used the trunk in that hour / (total seconds in an hour * maximum number of ports in a trunk * number of days between the fromDate and toDate selected) * 100).
Similarly, to get the utilization for each day in a week, the system calculates the utilization using the formula, ((sum of the duration of calls that used the trunk in a day) / (total seconds in each day * number of each day between the fromDate and toDate selected * maximum number of ports in a trunk) * 100).
In the case of monthly utilization reports, the system calculates the utilization for each day in a month, using the formula, ((sum of the duration of calls that used the trunk in a day) / (total seconds in each day * number of each day between the fromDate and toDate selected * maximum number of ports in a trunk) * 100).
Reports generate for each trunk that is chosen.
For calculation of the trunk utilization, the system uses the port numbers from the CAR Trunk Configuration window. To find this window, choose Unified Communications Manager database because the H.323 port number always equals zero in the database. The user must update H.323 trunk ports information in the CAR Trunk Configuration window.
. You cannot take port details for H.323 trunks from theBe aware that the only port detail information that is taken from the CAR Trunk Configuration window is only for those trunks that do not have port details that are available or that show zero in the Unified Communications Manager database.
This section describes how to generate, view, or mail Trunk Utilization reports.
Procedure
Step 1 |
Choose .The Trunk Utilization window displays. |
||||||||||
Step 2 |
In the Generate Reports field, choose a time as described in the following table.
|
||||||||||
Step 3 |
To display the list of trunks that you can include in the report in the List of Trunks box, perform one of the following tasks: |
||||||||||
Step 4 |
Choose a trunk type from the list. The trunk name displays in the List of Trunks box.
|
||||||||||
Step 5 |
In the List of Trunks box, choose the trunks that you want to include in the report.
|
||||||||||
Step 6 |
To move the chosen trunk to the list of Selected Trunks box, click the down arrow. The trunk(s) that you chose displays in the Selected Trunks box. |
||||||||||
Step 7 |
If you chose Generate New Report, enter the date range of the period for which you want to see call information.
|
||||||||||
Step 8 |
If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. |
||||||||||
Step 9 |
Click the View Report button. The report displays. |
||||||||||
Step 10 |
If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mail Reports. |