Note	To view the release notes for previous versions of Cisco Unified Communications Manager, choose the Cisco Unified Communications Manager version from the following URL: http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_release_notes_list.html

Note	Please review all sections in this document pertaining to installation before you install this version. Failure to install this version as described may result in inconsistent Cisco Unified Communications Manager behavior.

This 14SU4 ReadMe file contains important information about installation procedures and resolved caveats for Cisco Unified Communications Manager release 14SU4. This version can be applied to Cisco Unified Communications Manager and Session Management Edition.

Note	Before you install Cisco Unified Communications Manager, Cisco recommends that you review the Important Notes for information about issues that may affect your system.

The following sections comprise the system requirements for this release.

Server Support

In this release, you cannot install or run Cisco Unified Communications Manager on server hardware; you must run these applications on virtual machines. Please refer to the “Hardware” section of the Upgrade and Migration Guide for Cisco Unified Communications Manager and the IM and Presence Service, Release 14 for additional details:

https://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-installation-guides-list.html

Uninterruptible Power Supply

Ensure that you connect each node to an uninterruptible power supply (UPS) to provide backup power and protect your system.

Caution

Failure to connect the Cisco Unified Communication Manager nodes to a UPS may result in damage to physical media and require a new installation of Cisco Unified CM.

This SU is a cumulative update that incorporates all of the fixes and changes from Cisco Unified Communications Manager 14 through 14SU3 along with additional changes that are specific to this SU.

Note

You can only install this SU on Cisco Unified Communications Manager Release 10.5 through 11.x, 12.0(1x), 12.5(1), 14 through 14SU3, or any 14ES from 14.0.1.11001-1 to 14.0.1.14056-2. Upgrades from any earlier supported versions require a PCD migration. If you are upgrading from a version prior to 14, ensure you have the proper licensing prior to doing the upgrade.

For a list of all supported upgrade paths and the supported upgrade method, please see the Compatibility Matrix at:

http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-device-support-tables-list.html

Caution

Please note that if you install an SU it may contain fixes that are not included in the newer Unified CM releases. For example, a fix in an 12.5(1)SU, 12.5(1)SU5, may not be included in 14 because the fix was not available prior to the release of 14. In this example, an SU or ES on the 14 branch may be required to retain the same fixes.

For details about the features included in this release, refer to Release Notes for Cisco Unified Communications Manager and IM & Presence Service, Release 14SU4 at:

http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-release-notes-list.html

In addition to the features listed in the Release Notes, the following changes were introduced in 14SU3:

• Log4j upgrade to 2.19

In addition to the features listed in the Release Notes, the following changes were introduced in 14SU1:

• This release is signed with a new 2021 signing key. See the Important Notes section for more details.

Compatibility between collaboration products is detailed at the following link. You must insure your versions are compatible before beginning your upgrade:

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html

Cisco provides the following guidance to help you successfully upgrade Cisco Unified Communications Manager software:

• To minimize call-processing interruptions during the upgrade process, register all devices to servers that are running the same version of Cisco Unified Communications Manager software. Make sure that you register all devices to the backup Cisco Unified Communications Manager server or to the primary Cisco Unified Communications Manager server, but not to both the backup and primary servers.

Warning for Upgrades to 15

Warning

This SU adds support for Smart Receiver Transport for licensing. This feature is not found in the CUCM 15 base or 15SU1 releases, as those versions were released prior to development of this feature. Upgrades from this SU to any CUCM or IM&P 15 versions lower than 15SU2 are not allowed and will not be displayed as valid upgrade options. Customers upgrading from this SU should choose 15SU2 or higher as their target upgrade.

Warning for Upgrades from 10.5(2)

Warning

Per the Supported Upgrade and Migration Paths in the Compatibility Matrix, direct upgrades from any 10.5.2 release to any 14 release are not supported (PCD Migration or Fresh Install with Data Import are the only supported upgrade options from 10.5.2). In previous releases of 14, this upgrade path was not blocked in the code even though it is not supported. Starting with 14SU2, upgrades from release 10.5.2 are now blocked in the code so a direct upgrade attempt will now fail as an usupported upgrade.

Warning for Upgrades with FIPS Enabled

Warning

If you are upgrading with FIPS enabled and/or using PCD with FIPS enabled, see the CiscoSSL7 COP File Readme for information on the COP file ciscocm.ciscossl7_upgrade_CSCwa48315_CSCwa77974_v1.0.k4.cop. This document details the pre-requisites required for direct upgrade or direct migration to the 14SU2 or higher destination versions when FIPS is enabled.

To view documentation that supports Cisco Unified CM Release 14, go to:

https://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-documentation-roadmaps-list.html

Before upgrading, review the Upgrade and Migration Guide > Upgrade Planning for details on:

1. Supported Upgrade Paths

2. Upgrade options - There are multiple upgrade options available: Direct Upgrade, Cluster Upgrade, Fresh Install with Data Import, PCD. Detailed instructions for each may be found in the Installation Guide

3. Hardware, Software, Network, and VM requirements. Open VMWare Tools now default for new installations of version 12.5 and higher, and is recommended for upgrades from earlier versions.

4. Deprecated Phone Models

Compatibility information can be found in the Compatibility Matrix

Note	Apply this SU to all of your Cisco Unified Communications Manager servers, beginning with the publisher server and TFTP server

Refer to the Upgrade and Migration Guide for Cisco Unified Communications Manager and IM and Presence Service, Release 14 for detailed information about doing this upgrade:

https://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-installation-guides-list.html

Note	Because the 14.0.1.14900-94 build is a non-bootable ISO, it proves useful only for upgrades. You cannot use it for new installations. You may however install with the base version 14.0.1.10000-20 and apply 14.0.1.14900-94 as a patch during the installation.

Release 14SU4 is available in both restricted (which is the release type that has always been available from Cisco) and unrestricted versions of software to comply with import / export restrictions to various countries. The unrestricted version is available in limited markets. Please refer to the “Export Restricted and Export Unrestricted Software” section in the Understanding Upgrades and Migrations chapter, of the Upgrade and Migration Guide for Cisco Unified Communications Manager and the IM and Presence Service, Release 14 referenced above, for a more detailed description.

Note	Once installed, UNRST releases can never be converted or upgraded to releases which support full encryption capabilities

The file names and hash values you will use for this upgrade are:

Note	Revert to the previous version on all servers in the cluster in the same order in which you performed the upgrade.

Refer to the “Switch to Previous Version” section in the Upgrade Procedures chapter at Upgrade and Migration Guide for Cisco Unified Communications Manager and IM and Presence Service, Release 14 for detailed instructions on “Reverting to a Previous Version.”

https://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-installation-guides-list.html

Caveats describe unexpected behavior on a Cisco Unified Communications server. The following sections contain lists and descriptions of resolved and open caveats in this release.

Resolved Caveats

Resolved Caveats for Cisco Unified Communications Manager Release 14SU4 describes possible unexpected behaviors in Cisco Unified Communications Manager 14 releases.

Resolved CUCM Caveats in 14SU4 (everything fixed in SU4 since SU3)
Click Here for the list

Cumulative Resolved CUCM Caveats (everything fixed in all SU's since base 14)
Click Here for the list

Open Caveats

Open Caveats for Cisco Unified Communications Manager Release 14SU4 describes a few of the possible unexpected behaviors still remaining in Cisco Unified Communications Manager Release 14SU4.

Open CUCM Caveats in 14SU4
CSCwk28041: UCM 14SU4 Will Not Install On 14.0.1.14042-2 through 14.0.1.14056-2

CUCM Caveats 14 Complete List

For a complete list of caveats applicable to 14, use the following Bug Search Tool link:

https://bst.cloudapps.cisco.com/bugsearch?pf=prdNm&sb=afr&kw=*&bt=custV&prdNam=Cisco%20Unified%20Communications%20Manager%20(CallManager)&rls=14.0(1.1

To determine the caveats that were open for a specific release, use the following steps (the screenshots below are from Excel for Mac, the Excel for Windows options are a little different but follow the same basic flow):

1. Click on the "Export Results to Excel" link

2. Open the downloaded file in Excel and Save As a .xlsx file

3. Open a blank Excel workbook

4. Click on Data --> Get Data (Power Query)

   

5. Choose "Excel workbook" as the source.

   

6. Click "Browse", select the .xlsx file saved previously, and click Next

7. Click the checkbox next to the Tab name (by default it will be Search Results)

   

8. Click on the "Transform Data" button

   

9. Click on the fx button to insert a new step

   

10. In the text box next to the fx button, paste the desired filter string (see below)

11. Click the check mark to apply the changes

    

12. Click the "Close and load" button

    

13. The results that are loaded into the Excel workbook will be all of the Open Caveats for that specific release

Filter String for 14SU4:

For Mac:
Table.SelectRows(#"Changed column type", each not Text.Contains([Known Fixed Releases], "CCM.014.000(001.10000.020)") and not Text.Contains([Known Fixed Releases], "CCM.014.000(001.11900.132)") and not Text.Contains([Known Fixed Releases], "CCM.014.000(001.12900.161)") and not Text.Contains([Known Fixed Releases], "CCM.014.000(001.13900.155)") and not Text.Contains([Known Fixed Releases], "CCM.014.000(001.14900.094)") and not Text.StartsWith([Known Fixed Releases], "UCMAP") and Text.Contains([#"Product - Series"], "CallManager"))

For Windows:
= Table.SelectRows(#"Changed Type", each not Text.Contains([Known Fixed Releases], "CCM.014.000(001.10000.020)") and not Text.Contains([Known Fixed Releases], "CCM.014.000(001.11900.132)") and not Text.Contains([Known Fixed Releases], "CCM.014.000(001.12900.161)") and not Text.Contains([Known Fixed Releases], "CCM.014.000(001.13900.155)") and not Text.Contains([Known Fixed Releases], "CCM.014.000(001.14900.094)") and not Text.StartsWith([Known Fixed Releases], "UCMAP") and Text.Contains([#"Product - Series"], "CallManager"))

Security Advisory Caveats: To get a list of caveats that are applicable to Security Advisories or other security related issues, after filtering for a specific release using the examples above, an additional filter for the keyword PSIRT can be applied to the Release Note Enclosure column.

SUs contain firmware loads, however, Cisco recommends that you always download the latest firmware load from the Software Download Center.

Phone Firmware

To download phone firmware, follow this procedure:

1. Go to https://software.cisco.com/download/home

2. Click on Browse All

3. Click on Collaboration Endpoints

4. Choose the desired Endpoint Type

5. Choose the desired Endpoint Model

Device Packages

To download phone firmware, follow this procedure:

1. Go to https://software.cisco.com/download/home

2. Click on Browse All

3. Click on Unified Communications

4. Click on Call Control

5. Click on Unified Communications Manager (CallManager)

6. Choose the desired UCM version

7. Click on the Device Packages link

Firmware Versions in this Release

Device type                               Load name                       Version
----------------------------------------  ------------------------------  ----------
3905                                      3905.9-4-1SR4-2                 9.4(1SR4.2)
3911_3951-sip                             3911_3951-sip.8-1-4a            8.1(4.0)  
6608                                      6608-4.0.0.32-mgcp              4.0(0.32) 
6608cfb                                   6608cfb-4.0.0.03-sccp           4.0(0.3)  
6608mtp                                   6608mtp-4.0.0.06-sccp           4.0(0.6)  
6624                                      6624-4.0.0.13-mgcp              4.0(0.13) 
6901-sccp                                 6901-sccp.9-3-1-SR3-1           9.3(1.0)  
6901-sip                                  6901-sip.9-3-1-SR3-1            9.3(1.0)  
6911-sccp                                 6911-sccp.9-3-1-SR2-3           9.3(1.0)  
6911-sip                                  6911-sip.9-3-1-SR2-4            9.3(1.0)  
6945-SCCP                                 6945-SCCP-9-4-1-3SR3            9.4(1.3)  
6945-SIP                                  6945-SIP-9-4-1-3SR3             9.4(1.3)  
69xx-SCCP                                 69xx-SCCP-9-4-1-3SR3            9.4(1.3)  
69xx-SIP                                  69xx-SIP-9-4-1-3SR3             9.4(1.3)  
7832-sip                                  7832-sip.14-2-1-0201-40.k4      14.2.1(0201.40)
78xx                                      78xx.14-2-1-0201-40.k4          14.2.1(0201.40)
7911_7906-sccp                            7911_7906-sccp.9-4-2SR3-1       9.4(2SR3.1)
7911_7906-sip                             7911_7906-sip.9-4-2SR3-1        9.4(2SR3.1)
7914-sccp                                 7914-sccp.5-0-4                 5.0(4.0)  
7915                                      7915.1-0-4-2                    1.0(4.2)  
7916                                      7916.1-0-4-2                    1.0(4.2)  
7925-sccp                                 7925-sccp.1-4-8SR1-5.k3         1.4(8SR1.5)
7926-sccp                                 7926-sccp.1-4-8SR1-5.k3         1.4(8SR1.5)
7931-sccp                                 7931-sccp.9-4-2SR2-2            9.4(2SR2.2)
7931-sip                                  7931-sip.9-4-2SR2-2             9.4(2SR2.2)
7936-sccp                                 7936-sccp.3-3-21                3.3(21.0) 
7937                                      7937-1-4-5-7-SCCP               1.4(5.7)  
7940-7960                                 7940-7960-8.12.00-sip           8.12(00.0)
7940-7960-sccp                            7940-7960-sccp.8-1-2SR2         8.1(2SR2.0)
7941_7961-sccp                            7941_7961-sccp.9-4-2SR3-1       9.4(2SR3.1)
7941_7961-sip                             7941_7961-sip.9-4-2SR3-1        9.4(2SR3.1)
7942_7962-sccp                            7942_7962-sccp.9-4-2SR3-1       9.4(2SR3.1)
7942_7962-sip                             7942_7962-sip.9-4-2SR3-1        9.4(2SR3.1)
7945_7965-sccp                            7945_7965-sccp.9-4-2SR3-1       9.4(2SR3.1)
7945_7965-sccp                            7945_7965-sccp.9-4-2SR4         9.4(2SR4.0)
7945_7965-sip                             7945_7965-sip.9-4-2SR4-3        9.4(2SR4.3)
7975-sccp                                 7975-sccp.9-4-2SR3-1            9.4(2SR3.1)
7975-sccp                                 7975-sccp.9-4-2SR4              9.4(2SR4.0)
7975-sip                                  7975-sip.9-4-2SR4               9.4(2SR4.0)
7985                                      7985-4-1-7-0-sccp               4.1(7.0)  
8821-sip                                  8821-sip.11-0-6SR5-5.k4         11.0(6SR5.5)
8831-sip                                  8831-sip.10-3-1SR7-2            10.3(1SR7.2)
8832-sip                                  8832-sip.14-2-1-0201-40.k4      14.2.1(0201.40)
8845_65-sip                               8845_65-sip.14-2-1-0201-40.k4   14.2.1(0201.40)
88xx-sip                                  88xx-sip.14-2-1-0201-40.k4      14.2.1(0201.40)
894x-sccp                                 894x-sccp.9-4-2SR3-1            9.4(2SR3.1)
894x-sip                                  894x-sip.9-4-2SR3-1             9.4(2SR3.1)
8961                                      8961.9-4-2SR4-1.k3              9.4(2SR4.1)
9951                                      9951.9-4-2SR4-1.k3              9.4(2SR4.1)
9971                                      9971.9-4-2SR4-1.k3              9.4(2SR4.1)
ata                                       ata-3.2.4-sccp                  3.2(4.0)  
ata187                                    ata187.9-2-3-1                  9.2(3.1)  
ata190                                    ata190.1-2-2-003_SR2-1          1.2(2.3)  
ATA191                                    ATA191.12-0-2-0001-011          12.0.2(0001.11)
headset-builtin                           headset-builtin.3-2-0001-1.k4   3.2(0001.1)
PHONEOS-8875                              PHONEOS-8875.2-3-1-0001-26      2.3.1(0001.26)

Plug-in Report
------------------------------------------
cm-rtmt-client-plugin-14.0.0.0-0.i386.rpm
cm-jtapi-plugin-14.0.1.14900-1.i386.rpm
cm-axlsqltoolkit-plugin-1.1.0.0-1.i386.rpm
cm-ctlc-plugin-6.0.0.1-1.i386.rpm
cm-tsp-plugin-14.0.1.3-0.i386.rpm
cm-taps-plugin-7.0.2.0-1.i386.rpm

TZDATA file                               Version
----------------------------------------  ----------
platform-tzdata-2023c-1.el7.noarch.rpm    2023-c