The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
As assistants, you can access the Manager Assistant features on your computer using the Assistant Console application to handle calls for managers. The Manager Assistant enables you to handle calls for yourself and for as many as 33 managers. See Introduction, page 1.
Within this topic, see these subtopics:
•Logging In and Out of the Assistant Console
•Exploring the Console without Assisting Managers
•Using the Console with Your Mouse and Keyboard
•Using the Intercom Feature from the Console
•How You and Your Manager Use the Manager Assistant
On the Assistant Console, you can perform these call functions:
•Place, answer, divert, transfer, end, or hold a call.
•Add conference participants to a call.
•Perform speed dialing.
•Do directory searches.
•Open an intercom line to your manager. (If the intercom feature is not available on your phone, contact your system administrator.)
•Monitor manager call activity and change manager features and settings.
•Customize your call-handling tools.
•Enter numbers on a virtual keypad in response to interactive voice systems.
Use these steps to log in and out of the Assistant Console. When you log in, you are online and ready to handle calls. In the My Managers panel, two green arrows next to a manager's name indicate that the manager is logged in and therefore anticipating assistance. A manager whose name is grayed-out is not expecting assistance.
If you click the Settings button in the Log In dialog box, you can monitor administrative settings, which your system administrator may ask you to do in case of a problem. Do not modify these settings unless your system administrator instructs you to do so.
Procedure
Step 1 Obtain your username and password from your system administrator.
Step 2 To log in to the Assistant Console, enter your username and password in the Manager Assistant Log In dialog box. (You can specify for your login information to be remembered.) The Assistant Console opens on your desktop. You are logged in until you log off or until your online, connected, or call-control status changes for some reason. See Using the Status Bar.
Step 3 To log out, click File > Exit from the menu bar at the top. If you check the Remember user ID and Password option, you will be logged in automatically the next time that the Assistant Console is started on your computer.
If you are using a shared computer, you may want to log out of the Assistant Console by clicking File > Log Out from the menu bar. When you log in the next time, the Assistant Console will display the Log In dialog box instead of logging you in automatically with your username and password.
If you are using the Manager Assistant in the proxy-line mode, you can get familiar with the Assistant Console without making yourself available to managers. In that case, the Manager Assistant moves managers to another assistant.
During this time, you cannot receive phone calls for managers, and the My Managers panel on your console is inactive.
You cannot go offline to explore in the shared-line mode.
This topic contains these subtopics:
The following sections identify areas on the Assistant Console and how you can use them to control features and handle calls:
•Going Offline and Back Online
•Viewing Administrative Settings
Use these steps to go offline and back online.
When you go offline and back online, you are available again, and the Manager Assistant may move managers back to you if you had been the default and if other assistants are unavailable.
Your online status is visible from the status bar in the lower right corner of the console.
Procedure
Step 1 To go offline, log in as usual and click the Go Offline call-control button, which is the first icon button in the row of icons along the top or side of your screen. (You can also choose File > Go Offline from the menu bar.)
Step 2 To go back online, click the Go Online call-control button, which is the same one as Go Offline. Again, you can choose File > Go Online from the menu bar.
You can use the menu bar, which is located at the top of the Assistant Console, as follows (context-sensitive menu commands):
•File—Go online and offline, log in and out, and exit the console.
•Edit—Create and edit speed dials, personalize keyboard shortcuts, change the divert target, set preferences, and access administrator settings.
•View—Specify text size and color schemes and refresh the default layout.
•Call—Dial, answer, hang up, place on hold, transfer, divert, or add conference participants to a call.
•Manager—Place an intercom call to a manager, access the Manager Configuration window, and enable or disable features for a manager. (If the intercom feature is not available on your phone, contact your system administrator.)
•Help—Access online help.
You can perform tasks from the Assistant Console by clicking call-control buttons (the row of icons located along the top or side of the console). Position your mouse over a call-control button to see a description of its function.
Call-control buttons are context-sensitive. A button's availability depends on the state of the selected call. Before you click the button, make sure that the call is selected (highlighted).
You can right-click on the blank space (not on the buttons themselves) in the call-control panel to rearrange its position on the console.
See Table 1 for a list of call-control buttons.
The Assistant Console displays calls for you and for your managers in the My Calls panel. These are calls that you can act on by using the Assistant Console tools.
Each call is displayed beneath its associated phone line.
Each phone line is displayed beneath one of these headings:
•My lines—Displays any currently active call that you have placed or received using your own phone line.
•Manager lines—Displays active calls that you are handling or can handle for your manager.
•Intercom—Displays the status of your intercom lines, if applicable.
Depending on the number of managers assigned to you, you will see 1 to 33 lines in the "Manager lines" section of the My Calls panel.
Each manager line contains the following:
•Either your manager's shared-line number or your manager's proxy extension number.
•The manager's name.
•Active call information—Active calls are represented with the following:
–An animated icon indicating the status of the call (ringing, connected, or on hold)
–The caller ID
–A timer indicating the duration of the call
When transferring a call to a manager, you must enter the actual extension, rather than a proxy extension. You can see a manager's actual phone extension in the My Managers panel on the Assistant Console.
You cannot apply "Transfer to Voice Messaging" or "Redirect" to calls that you place or receive on your own phone line. These features apply only to calls you receive on a manager's line.
When you are using Manager Assistant in the shared-line mode, you can identify that your manager or another assistant has answered a call when you see a double red arrow next to your manager's line.
You can use the My Managers panel in the Assistant Console to monitor call activity and feature status for each of your managers. You can also enable and disable a manager features from this panel.
You can monitor, but cannot handle, calls that appear here. These calls have already been redirected to your manager, or they are calls that your manager has placed or received directly.
Note Alert Tone, Do Not Disturb, Divert All, Assistant Watch, Filter Calls, and Filter Mode features are available only in the proxy-line mode.
Table 2 describes the information displayed under each column heading in the My Managers panel.
The speed dial feature enables you to set up a personal phone book on the Assistant Console. You can place calls and perform other call-handling tasks using speed dial numbers.
To open the speed dial menu and view a list of available commands, right-click on the Speed Dials panel or choose Edit > Speed Dials from the menu bar. If some speed dial commands are grayed-out, try selecting a speed dial listing before opening the menu.
Use the speed dial menu to create and modify speed dial groups, place a call, specify a transfer target, and add conference participants to a call.
To access speed dial numbers quickly, consider organizing entries into speed dial groups. For example, you can create a personal group for yourself and a group for each of your managers.
When you add new speed dial listings, the listings appear in the order that you created them. To sort all the items in a speed dial list, click on a column header (Name, Telephone Number, or Notes). Lists are sorted alphabetically or numerically, depending on the header you choose. Click the header again to toggle between ascending and descending order.
You can make calls using your speed dial listings in one of these ways:
•Drag the speed dial entry to either your line or your manager's line.
•Make a call on your line or your manager's line by highlighting the line and double-clicking on the speed dial entry.
•Drag the speed dial entry to the dial button on your call-control panel and click OK.
Here are some quick ways to use your speed dial listings (without opening the speed dial menu):
•To perform a blind transfer to a person in your speed dial list, drag and drop an active call to the person's speed dial listing.
•To add a new speed dial listing, drag and drop a listing from the Directory panel to the Speed Dial panel.
Note The Sample speed dial group and example speed dial listing are inactive. They are included to demonstrate how speed dial information appears on the console. You can delete the samples at your convenience.
Use the directory to search for a coworker and to place and handle calls using the search results.
To search for a coworker, enter any part of the person's first and/or last name in the search fields and click Search. Search results are sorted by first name, last name, phone number, and department. To clear search results and search fields, click Clear.
Here are some ways to use the search results:
•Double-click on a person's name or number to place a call.
•Right-click a person's name to display a pop-up menu containing relevant commands.
•To perform a blind transfer to a person in your directory, drag and drop an active call to the appropriate name or number.
•To add a new speed dial listing, drag and drop a listing from the Directory panel to the Speed Dials panel.
The status bar is located at the bottom of your Assistant Console screen and displays this system information:
•Connected/Not Connected—Indicates the status of your connection to the Manager Assistant server.
•Online/Offline—Indicates your availability to managers.
•Call-Control Up/Call-Control Down—Indicates the availability of call-handling features.
•Filtering Down—Indicates the availability of the call-filtering features.
The status bar also displays a pop-to-top icon to indicate if your console is set to appear automatically on your desktop when you receive an incoming call. Click this icon to toggle the feature on and off. (It is disabled by default.) When the feature is enabled, the icon appears darker (depressed).
You can also enable and disable pop-to-top option from the Edit > Preferences menu.
You can customize the size and position of panels in the Assistant Console. Use the View menu to change the color scheme and font and to refresh initial default settings.
You can set the console to appear automatically on your desktop when you receive an incoming call. To enable this pop-to-top feature, choose Edit > Preferences from the main menu and then click the "Activate console on new call" check box. A pop-to-top icon is located in the status bar at the bottom of your console screen. The icon appears darker (depressed) when the feature is enabled.
You can view your administrative settings from the Log In dialog box or you can choose Edit > Settings from the menu bar. You do not need to modify settings unless your system administrator instructs you to do so.
These are the two types of settings:
•Basic Settings
–Manager Assistant Server Host Name or IP address
–Manager Assistant Server Port
•Advanced Settings—Displays the location where your trace files are stored
–Traces enabled or disabled
You can enable these two settings in the Preferences menu:
•Setting the console to appear automatically on your desktop when you receive an incoming call. See Adjusting the Console Layout.
•Setting your computer to launch the Assistant Console automatically when you start up your computer—To enable the automatic startup feature, choose Edit > Preferences from the main menu and then click the "Autostart Console on computer startup" check box. The Assistant Console will launch automatically the next time that you start up your computer
To disable each of the features, uncheck the corresponding check box.
The Assistant Console provides you with several mouse and keyboard combinations to perform tasks:
•Click, right-click, and double-click console items.
•Drag and drop console items. For example, you can drag and drop a selected call from the My Calls panel onto the Speed Dials panel to add a speed dial listing.
•Use keyboard shortcuts.
For example, you can from these options to answer a call:
•Click the Answer call-control button.
•Double-click the call in the My Calls panel.
•Right-click the call in the My Calls panel and then choose Answer from the pop-up menu.
•Use a keyboard shortcut.
Tip You can find all of the options for performing a specific task, such as transferring a call, in "Using the Assistant Console to Handle Calls."
The Intercom feature is an optional feature that enables you to speak to a manager on an intercom line.
It is configured by your system administrator so if the feature is not available on your phone, contact your system administrator.
Procedure
Step 1 To place an intercom call, do one of the following:
•Double-click that manager's name in the My Calls panel.
•Single-click the Intercom icon in the My Managers panel.
•Initiate the intercom call without specifying a manager. (This feature available for all Cisco Unified IP phones except for the Cisco Unified IP Phones 7961G-GE, 7961G, 7960G, 7941G-GE, 7941G, and 7940G.)
Step 2 When you initiate this call, the manager's speakerphone answers automatically. You can begin talking using the speakerphone, headset, or handset. To speak to you, the manager must press the Intercom button on his or her IP phone.
The manager at the top of your managers list becomes the target for your call. (And the manager you connect to through an intercom call becomes the target of your button.)
Note Only for the Cisco Unified IP Phones 7961G-GE, 7961G, 7960G, 7941G-GE, 7941G, and 7940G, if your manager is on another call when you initiate an intercom call, the call rings on the manager's phone and he or she must answer the call manually to hear the intercom. (This is also the case when a manager places an intercom call to you at a time when you are on another call.) For other phones, the manager does not need to answer the call to hear the intercom, , as described at the beginning of this step.
Step 3 To end the intercom call, click the Intercom icon again.
You can use keyboard shortcuts, rather than your mouse, to use most of the tools and features on the Assistant Console. Keyboard shortcuts can help you handle calls more efficiently.
You can use initial default shortcuts or you can customize shortcuts to suit your needs. The Manager Assistant remembers a customized shortcut the next time you log in.
Click an item in the menu bar to display commands and shortcuts. A keyboard shortcut is associated with most menu commands.
You can also view shortcuts from the Edit Shortcut Key pop-up window. Choose Edit > Keyboard Shortcuts to open the window and then select a menu command from the list to see the associated shortcut.
For example, if you select Call > Answer in the Edit Shortcut Key window, you can see that the initial default shortcut uses a combination of the Control key (Ctrl) and the A key (Ctrl-A).
To customize a keyboard shortcut, choose Edit > Keyboard Shortcuts from the menu bar. Select a menu command from the list and click Ctrl, Shift, or Alt to assign the first part of the shortcut. Next, enter a letter or number in the Key field to assign the last part of the shortcut. Click Save to assign the new keyboard shortcut to the selected command.
To use a shortcut, hold down the first key in the shortcut combination and press the second key. For example, if you want to use the Ctrl-L shortcut to put a call on hold, hold down Ctrl and press L.
For keyboard shortcuts to work, the Assistant Console page must be the active window on your desktop.
You will use the Manager Assistant features from your phone and the Assistant Console to handle calls for your manager. For example, when you answer a a call for your manager, you may want to consult your manager by double-clicking the intercom line on your Assistant Console. If your manager chooses to pick up the call, you can forward the call by selecting the Redirect call button on the Assistant Console or by choosing the Redirect softkey on your phone. If your manager wants the caller to leave a voice message, you can forward the call to your manager's voice-messaging system by selecting the Transfer to Voice Mail call button or by choosing the TrnsfVM softkey.
Your manager uses the Manager Assistant features primarily from the Cisco Unified IP Phone, as in these examples:
•Your manager may be expecting a call from a real-estate broker. Your manager would enable Assistant Watch to monitor the incoming calls. When the realtor's number appears, your manager can intercept the call with the Intrcpt softkey.
•Your manager can also press the Redirect softkey on the phone to divert a ringing call to you. He or she can confirm that you have answered the diverted call and monitor the duration of the call by looking at the Manager Assistant status window on the phone's LCD screen.
You or your manager can customize manager features from the Manager Configuration window. To open this window, choose Manager > Configuration from the menu bar, or right-click anywhere in a manager's row in the My Managers panel and choose Configuration.