Webex Wireless Phone 840 and 860 Release Notes for Firmware Release 1.4(0)

Webex Wireless Phone 840 and 860 Release Notes for Firmware Release 1.4(0)

These release notes support the Webex Wireless Phone 840 and 860 software release 1.4(0). These wireless smartphones require:

- Cisco Unified Communications Manager (Unified Communications Manager):

- Minimum: 11.5(1)

- Recommended: 12.5(1) or higher

- Supported Wi-Fi access point.

See the Cisco Webex Wireless Phone 840 and 860 Wireless LAN Deployment Guide for supported access point options.

- New and Changed Features

- Related Documentation

- Installation

- Limitations and Restrictions

- Caveats

New and Changed Features

The following sections describe the features that are new or have changed in this release.

Note

These features require the latest device enabler QED installer and software COP files.

- Extension Mobility Cross Cluster

- Personal Directory Contacts on Cisco Unified Communications Manager

- Barcode Test Scan

- Extension Mobility Log In with No Directory Number

- Wi-Fi Access Point Connection Information

- User Interface Updates

- Google Security Update

Extension Mobility Cross Cluster

Similar to extension mobility, extension mobility cross cluster (EMCC) allows different users to share a single phone at different times and still access their own phone settings. But EMCC also allows users to log in to a phone in a remote cluster within their organization, such as a different office or location.

Where to Find More Information

Cisco Webex Wireless Phone 800 Series User Guide

Cisco Webex Wireless Phone 800 Series Administration Guide for Cisco Unified Communications Manager

Cisco Webex Wireless Phone 840 and 860 Wireless LAN Deployment Guide

Feature Configuration Guide for Cisco Unified Communications Manager

Personal Directory Contacts on Cisco Unified Communications Manager

The personal directory allows you to store personal contacts to the Cisco Unified Communications Manager, rather than to a single phone. That way, you can access your personal directory contacts from any phone in the call control system.

Where to Find More Information

Cisco Webex Wireless Phone 800 Series User Guide

Cisco Webex Wireless Phone 800 Series Administration Guide for Cisco Unified Communications Manager

Cisco Webex Wireless Phone 840 and 860 Wireless LAN Deployment Guide

Barcode Test Scan

The Barcode app on the Webex Wireless Phone 840S and Webex Wireless Phone 860S has a new test scan feature that lets you check if the scanner correctly identifies barcodes.

Where to Find More Information

Cisco Webex Wireless Phone 800 Series User Guide

Cisco Webex Wireless Phone 800 Series Administration Guide for Cisco Unified Communications Manager

Cisco Webex Wireless Phone 840 and 860 Wireless LAN Deployment Guide

Extension Mobility Log In with No Directory Number

The extension mobility login prompt automatically appears if you're subscribed to extension mobility services but don't have a directory number (DN) configured. If you're not subscribed to extension mobility services and don't have a DN configured, then a prompt displays to configure a DN.

Wi-Fi Access Point Connection Information

If needed for troubleshooting, you can now quickly find details about the Wi-Fi access point (AP) connection for your phone from the Call Quality Settings app. If the AP supports them, the following information may be available:

- SSID (Service Set Identifier)

- AP name

- BSSID (Basic Service Set Identifier)

- Channel

- RSSI (Received Signal Strength Indicator)

- Noise

- CU (Channel Utilization)

Where to Find More Information

Cisco Webex Wireless Phone 800 Series Administration Guide for Cisco Unified Communications Manager

Cisco Webex Wireless Phone 840 and 860 Wireless LAN Deployment Guide

User Interface Updates

To make it easier to use your phone, the color and style of some elements like onscreen buttons and icons have a new look. The only icon that is different from previous releases is on the Call Quality Settings app.

Where to Find More Information

Cisco Webex Wireless Phone 800 Series User Guide

Cisco Webex Wireless Phone 800 Series Administration Guide for Cisco Unified Communications Manager

Cisco Webex Wireless Phone 840 and 860 Wireless LAN Deployment Guide

Google Security Update

Google security libraries were updated.

Related Documentation

Use the following sections to obtain related information.

- Webex Wireless Phone 840 and 860 Documentation

- Cisco Unified Communications Manager Documentation

Webex Wireless Phone 840 and 860 Documentation

Find documentation specific to your phone model and language on the product support page for the Webex Wireless Phone. From this page, you can also find the Deployment Guide.

Cisco Unified Communications Manager Documentation

See the Cisco Unified Communications Manager Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release on the product support page.

Installation

- Download the COP Files for Release 1.4(0)

- Load the COP Files to Cisco Unified Communications Manager

- Install Manufacturing CA Certificates

Download the COP Files for Release 1.4(0)

Download the correct device enabler QED installer and software Cisco Options Package (COP) files for your phone and Cisco Unified Communications Manager version, so that you can install them on the Cisco Unified Communications Manager servers in the cluster.

Procedure

Step 1

Go to the Software Download page for the phones.

Step 2

From Webex Wireless Phone, choose the phone model.

Step 3

Choose Latest Releases > QED Installer, and then click either Download or Add to Cart for the required device enabler QED installer COP file.

Device Enabler QED Installer COP file for 840: cmterm-840-installer.1-4-0.k4.cop.sha512

Device Enabler QED Installer COP file for 860: cmterm-860-installer.1-4-0.k4.cop.sha512

Note

To access more details about the COP files, such as the Checksum details and a link to the Readme file, hover the mouse pointer over the filename.

Note

If you chose to click Download, follow the prompts.

Step 4

Choose Latest Releases > 1.4(0), and then click either the Download or Add to Cart button for the required software COP file.

Software COP file for 840: cmterm-840-sip.1-4-0-975-34190.k4.cop.sha512

Software COP file for 860: cmterm-860-sip.1-4-0-1327-34190.k4.cop.sha512

Note

If you chose to download the file, follow the prompts.

If you chose to add the files to your cart, click the Cart when you are ready to download all the files.

Load the COP Files to Cisco Unified Communications Manager

You must install the Webex Wireless Phone 840 and 860 device enabler QED installer and phone software Cisco Options Package (COP) files into each Cisco Unified Communications Manager (Unified Communications Manager) in the cluster.

Note

These COP files are signed with the sha512 checksum. Cisco Unified Communications Manager versions before version 14 don't automatically include support for sha512.

For the first installation, install the device enabler QED installer file first and then the software file.

For future software updates, there is not always a corresponding device enabler QED installer update. When a software update is available, check the latest version of the device enabler QED installer file to see whether you also must update it.

Note

With each new software release, the Cisco apps are also updated in the Play Store. However, if you manage the phones through an Enterprise Mobility Management (EMM) application, we recommend that you update the firmware on the phones to minimize any risk of app incompatibility.

Before you begin

- Download the device enabler QED installer and phone software COP files from the Software Download site.

- If you have Unified Communications Manager version 11.5 or 12.5 and don't already have sha512 checksum support enabled, install ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.

Caution

Choose an appropriate time to perform this task. As part of this task you must restart each Unified Communications Manager in the cluster after you install a device enabler QED installer COP file, unless your version of Unified Communications Manager offers an alternate process that does not require a reboot.

See the Manage Device Firmware section of the Administration Guide for Cisco Unified Communications Manager for your Unified Communications Manager version, to see if it allows an installation process that does not require a reboot.

Procedure

Step 1

In each Unified Communications Manager in the cluster, select Cisco Unified OS Administration > Software Upgrades > Install/Upgrade.

Step 2

Enter the Software Location data.

Step 3

Click Next.

Step 4

Select the COP (.cop.sha512) file.

Note

If the COP file doesn't appear in the available files list, ensure that you enable sha512 checksum support.

Step 5

Click Next to download the COP file to Unified Communications Manager.

Step 6

Check that the file checksum details are correct.

Step 7

Click Next to install the COP file on Unified Communications Manager.

Step 8

Click Install Another and repeat steps 2–7 to install another COP file.

Step 9

Perform the following actions based on the COP files that you installed.

1. If you installed a device enabler QED installer COP file:

- For 11.5(1)SU4 and lower:

- Reboot all Unified Communications Manager nodes through Cisco Unified OS Administration > Settings > Version > Restart.

- For 11.5(1)SU5 and higher or 12.5(1) and higher:

- Restart the Cisco Tomcat service on all Unified Communications Manager nodes.

- If running the Unified Communications Manager service on the publisher node, restart the service on the publisher node only. You do not need to restart the Cisco Call Manager Service on subscriber nodes.

2. If you installed a software COP file, restart the Cisco TFTP service for all nodes running the Cisco TFTP service.

Install Manufacturing CA Certificates

The phones use a new manufacturing certificate authority (CA). Until Cisco Unified Communications Manager (Unified Communications Manager) includes these new certificates, you must manually add the new root and intermediate certificates to the certificate chain to trust the new Manufacturing Installed Certificates (MIC). After you add the new certificates to the trust chain, the MICs can be used for trust services such as SIP TLS, Configuration File Encryption, and LSC Certificate distribution.

Procedure

Step 1

Download the missing root and intermediate certificates from the externally available Cisco PKI website. The missing certificates to complete the trust chain up to and including the root for the new MICs are:

- Cisco Manufacturing CA III (cmca3) - Intermediate

- Cisco Basic Assurance Root CA 2099 (cbarc2099) - Root for Cisco Manufacturing CA III

Step 2

From your web browser, log in to the Cisco Unified Operating System Administration web page.

Step 3

Under the Security menu, select Certificate Management.

Step 4

Select Upload Certificate/Certificate Chain.

Step 5

Select CallManager-trust for the Certificate Purpose, browse to the certificate, then select Upload.

Repeat this step for all certificates on the Unified Communications Manager Publisher only as the certificate replicates to all other Unified Communications Manager nodes.

Step 6

Select CAPF-trust for the Certificate Purpose, browse to the certificate, then select Upload.

Repeat this step for all certificates on all Unified Communications Manager nodes as the certificate will not replicate to all other Unified Communications Manager nodes automatically.

Limitations and Restrictions

Caveats

- View Bugs

- Open Bugs

- Resolved Bugs

View Bugs

You can search for bugs using the Cisco Bug Search Tool.

Known bugs are graded according to severity level, and can be either open or resolved.

For more information about how to use the Bug Search Tool, see Bug Search Tool Help.

Before you begin

To view bugs, you need the following items:

- Internet connection

- Web browser

- Cisco.com user ID and password

Procedure

Step 1

Click the following links to view bugs for the 1.4(0) release of the Webex Wireless Phone 840 and 860:

- View all bugs.

- View all open bugs.

- View all resolved bugs.

Step 2

When prompted, log in with your Cisco.com user ID and password.

Step 3

(Optional) Enter the bug ID number in the Search For field, then press Enter.

Open Bugs

The following list contains a snapshot of severity 1, 2, and 3 bugs that were open at the time of the Webex Wireless Phone 840 and 860 software release 1.4(0).

For an updated view of open bugs or to view more information about specific bugs, access the Bug Search Tool as described in View Bugs.

- CSCvz70007 840 phone continues to play call waiting tone periodically after the call has ended

- CSCvz81223 840/860 is not refreshing the Personal Directory list every 2 hours as expected

- CSCvz93775 Battery Percentage option in the Custom Settings app is not managing the Settings option correctly

- CSCvz93791 Auto-rotate Screen option is missing if Disabled in Custom Settings app then set to User Controlled

- CSCvz93805 Auto-rotate Screen option in the Custom Settings app is not managing the Settings option correctly

- CSCwa01438 840/860 logs out of EMCC when the phone is restarted

Resolved Bugs

The following list contains a snapshot of severity 1, 2, and 3 bugs that were resolved at the time of the Webex Wireless Phone 840 and 860 software release 1.4(0).

For an updated view of resolved bugs or to view more information about specific bugs, access the Bug Search Tool as described in View Bugs.

- CSCvx62886 Multiple Vulnerabilities in Frame Aggregation and Fragmentation Implementation of 802.11

- CSCvy50683 840 send disassociate to AP2 with reason code:0x0001 during FT roaming

- CSCvy59852 No DN displayed on Incoming alert UI when display name config

- CSCvy59855 UI error when config 24 digit DN as share line number

- CSCvy59858 UI error while CFW with 'Caller Name'&'Caller Number'&'Redirected Number'&'Dialed Number' enabled

- CSCvy81870 Webex 840 doesn't display secure lock icon for encrypted call when answering within native phone app

- CSCvy85323 Some values for Panic Button option when managing the Emergency app via an EMM are not working

- CSCvy88209 Auto Answer Timer doesn't work on 860/840

- CSCvz41642 Phone uses service name from phone service config instead of service name from phone subscription

- CSCvz41661 Phone is able to get to EM app login screen even when Extension Mobility is not enabled

Copyright Page