Configuring Domain Name Settings
Changing a DNS Server
Use this procedure to change the DNS servers if their names or IP addresses have changed.
Before You Begin
Gather the following information:
- The hostname of the Cisco Unified SIP Proxy system.
- The domain name and IP address of the DNS server.
Procedure
Step 1 Choose System > Domain Name Settings.
The system displays the Domain Name Settings page.
Step 2 Change the hostname or domain name of the server that stores the application files.
Step 3 Click Apply.
What To Do Next
Save and then reload the configuration. See Using the Administration Control Panel .
Related Topics
Back to the Configuring Domain Name Settings menu page
Adding a DNS Server
Enter additional DNS servers as alternate server destinations, to be used if the system cannot access the primary domain name server.
Restriction
You can have a maximum of four DNS servers.
Procedure
Step 1 Choose System > Domain Name Settings.
The system displays the Domain Name Settings page.
Step 2 Click Add under Domain Name Service (DNS) Servers.
The system displays the Add a DNS server page.
Step 3 Enter the IP address of the server.
Step 4 Click Add.
What To Do Next
Save and then reload the configuration. See Using the Administration Control Panel .
Related Topics
Back to the Configuring Domain Name Settings menu page
Removing a DNS Server
Procedure
Step 1 Choose System > Domain Name Settings.
The system displays the Domain Name Settings page.
Step 2 Check the check box next to the DNS server to delete.
Step 3 Click Delete.
Step 4 At the prompt, click OK.
What To Do Next
Save and then reload the configuration. See Using the Administration Control Panel .
Related Topics
Back to the Configuring Domain Name Settings menu page