The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix describes the pin signals of the access point Ethernet connectors, and the power injector input and output connectors. Table E-1 describes the pin signals of the access point PoE-out connector.
|
|
---|---|
Table E-2 describes the pin signals for the access point PoE-in Ethernet connector.
|
|
---|---|
Table E-3 describes the pin signals for the power injector input connector (To Switch).
|
|
---|---|
Table E-4 describes the RJ-45 pin signals for the power injector output connector (To AP).
|
|
---|---|
Note The power injector output connector (To AP) only supplies 56 VDC power when the Ethernet cable is connected to the 1550 PoE-in connector.