• The sensor fails to detect broadcasted beacons by other APs while scanning its RF environment. However, this behavior occurs intermittently with low probability. It does not associate with the target SSID when it cannot see the beacons and skips the test. The DNAC logs show the detection success rates. For more information, see CSCwa25257.

• Problem If you enable P2P blocking on the controller, or set it to forward upstream, you might observe IP Service-Level Agreement (SLA) test failures on the Cisco DNA Center sensor dashboard.

  Solution To avoid this issue, disable P2P on the controller.

• Problem If the sensor runs on Cisco wireless software, such as Cisco Wireless Release 8.5 that supports Cisco IOS-based (Wave 1) APs, you might experience IP SLA test failure.

  Solution To avoid this issue, disable the IP SLA test for Cisco Wave 1 APs.

Caveats describe unexpected behavior in the Cisco Wireless Network Sensor software. Severity 1 caveats are the most serious, while Severity 2 caveats are less severe.

The Unfixed Issues and Unfixed Issues sections list the caveats for this release.

Each caveat contains the following information:

• Identifier: Each caveat is assigned a unique identifier (ID) with a pattern of CSCxxNNNNN, where x is any letter (a-z), and N is any number (0-9). Cisco documentation such as Security Advisories, Field Notices and other Cisco support documents frequently refer to these caveat IDs. Technical Assistance Center (TAC) engineers or other Cisco staff can also provide you with the ID for a specific caveat.

• Description: A description is a brief of the issue observed when the caveat occurs.

Cisco Bug Search Tool

The Cisco Bug Search Tool (BST), the online successor to the Bug Toolkit, is designed to improve network risk management and device troubleshooting effectiveness. The BST allows partners and customers to search for software bugs based on product, release, and keyword and aggregates vital data, such as bug details, product, and version. The tool has a provision to filter bugs based on credentials to provide external and internal bug views for the search input.

For more information about using the Cisco Bug Search Tool effectively,including setting email alerts for bugs, filtering bugs, and saving bugs and searches, see the Bug Search Tool Help & FAQ page.

You can access the listed bugs through the BST. This web-based tool provides you access to the Cisco bug tracking system, which maintains information about bugs and vulnerabilities in the Cisco Wireless Network Sensor software and other Cisco hardware and software products.

Click the Caveat Identifier number in the table. The corresponding BST page gets displayed with the details of the bug.

Note	If you are not logged in, you will be redirected to a Log In page where you need to enter your registered Cisco.com username and password to log In. If you do not have a Cisco.com account, you can register for one.

If the defect that you have selected cannot be displayed, this may be due to one or more of the following reasons:

• The defect number does not exist

• The defect does not have a customer-visible description yet

• The defect is marked Cisco Confidential

• Cisco Aironet 1800S Active Sensor Getting Started Guide

• Cisco Aironet Sensor Deployment Guide