Dashboard
The Dashboard will display the throughput status, and will provide you with easy steps to configure or monitor your network device. This page is updated every 30 seconds.
Connected Clients
The total number of clients currently associated with the WAP device. Click the box, to be redirected to the Clients page.
Internet/LAN/Wireless
Round icons on the top right of the page, show Internet, LAN and wireless connection status.
Internet
-
Red round — No Internet connection.
-
Green round — Internet connection is good.
LAN
-
Red round — No wired connection.
-
Green round — Wired connection.
Click the LAN link to view the LAN Status page.
Wireless
-
Red round — All radios are disabled.
-
Green round — At least one radio is working. One or two radios are enabled.
Click the Wireless link to view the Wireless Status page.
2.4G Radio Throughput
This line chart displays 2.4G Radio Throughput and updates every 30 seconds.
-
Upload—Throughput of the last 30 seconds transmitted.
-
Download—Throughput of the last 30 seconds received.
Click Upload or Download to not display data.
5G Radio Throughput
This line chart displays 5G Radio Throughput and updates every 30 seconds.
-
Upload—Throughput of the last 30 seconds transmitted.
-
Download—Throughput of the last 30 seconds received.
Click Upload or Download to not display data.
Top Clients
According to the traffic order, this bar chart displays the top 5 Traffic clients devices
-
Upload—Throughput of the last 30 seconds transmitted.
-
Download—Throughput of the last 30 seconds received.
Click Upload or Download to not display data.
SSID Utilization
According to the traffic order, this pie chart displays the top 5 Traffic SSID
-
Traffic —total number of bytes transmitted and received.
Network Usage
This line chart displays the eth throughput
-
Upload—Throughput of the last 30 seconds transmitted.
-
Download—Throughput of the last 30 seconds received.
Click Upload or Download to not display data.
Quick Access
To simplify the device configuration through quick navigation, the Getting Started page provides links for performing common tasks. For more details, see Quick Start Configuration.
LAN Status
Click on the LAN circle to display the following configuration and status settings on the LAN interface.
-
MAC Address — The MAC address of the WAP device.
-
IP Address — The IP address of the WAP device.
-
Subnet Mask — The subnet mask of the WAP device
-
Default Gateway — The default gateway of the WAP device.
-
Domain Name Server-1 — The IP address of the domain name server 1 used by the WAP device.
-
Domain Name Server-2 — The IP address of the domain name server 2 used by the WAP device.
-
Green Ethernet Mode — Green Ethernet mode of the Ethernet interface.
-
IPv6 Address — The IPv6 address of the WAP device.
-
IPv6 Autoconfigured Global Addresses — The IPv6 autoconfigured global addresses.
-
IPv6 Link Local Address — The IPv6 link local address of the WAP device.
-
Default IPv6 Gateway — The default IPv6 gateway of the WAP device.
-
IPv6-DNS-1 — The IPv6 address of the IPv6 DNS server 1 used by the WAP device.
-
IPv6-DNS-2 — The IPv6 address of the IPv6 DNS server 2 used by the WAP device.
-
VLAN ID — Identifier of the VLAN.
Note |
These settings apply to the internal interface. Click Edit to change any of these settings. You will be redirected to the LAN page. Click Refresh to refresh the screen and show the most current information. Click Back to return to the Dashboard page. |
Wireless Status
Click the Wireless circle to display the wireless radio interfaces, such as:
-
Wireless Radio — The wireless radio mode is enabled or disabled for the radio interface.
-
MAC Address — The MAC address associated with the radio interface.
-
Mode — The 802.11 mode (a/b/g/n/ac) used by the radio interface.
-
Channel — The channel used by the radio interface.
-
Operational Bandwidth — The operational bandwidth used by the radio interface.
-
Click Edit to change any of these settings. You will be redirected to the Radio page.
Click Refresh to refresh the screen and show the most current information.
Click Back to return to the Dashboard page.
Interface Status
The Interface Status table displays the following status information for each Virtual Access Point (VAP) and on each Wireless Distribution System (WDS) interface:
-
Network Interface — The wireless interface of the WAP device.
-
Name (SSID) — The wireless interface name.
-
Status — The administrative status (up or down) of the VAP.
-
MAC Address — The MAC address of the radio interface.
-
VLAN ID — The VLAN ID of the radio interface.
-
Profile — The name of any associated scheduler profile.
-
State — The current state (active or inactive). The state indicates whether the VAP is exchanging data with a client.
Traffic Statistics
The Traffic Statistics page shows the real-time transmit and receive statistics for the Ethernet interface, the Virtual Access Points (VAPs), and all WDS interfaces. All transmit and receive statistics reflect the totals since the WAP device was last started. If you reboot the WAP device, these figures indicate the transmit and receive totals since the reboot.
To view traffic statistics, select
.The following information is displayed:
-
Interface—Name of the Ethernet interface, each VAP interface, and each WDS interface. The name for each VAP interface is followed by its SSID in parentheses
-
Total Packets—The total number of packets sent and received by the WAP device is displayed in the Transmit Traffic Statistics table and the Receive Traffic Statistics table respectively.
-
Total Bytes—The total number of bytes sent and received by the WAP device is displayed in the Transmit Traffic Statistics table and the Receive Traffic Statistics table respectively.
-
Total Dropped Packets—The total number of dropped packets sent and received by the WAP device is displayed in the Transmit Traffic Statistics table and the Receive Traffic Statistics table respectively.
-
Total Dropped Bytes—The total number of dropped bytes sent and received by the WAP device is displayed in the Transmit Traffic Statistics table and the Receive Traffic Statistics table respectively.
-
Errors—The total number of errors related to sending and receiving data on the WAP device.
Note |
You can click Refresh to view the updated information. |