- About this Guide
- GGSN Support in GPRS/UMTS Wireless Data Services
- Understanding the Service Operation
- GGSN Service Configuration Procedures
- GGSN Configuration Example
- Mobile IP Configuration Examples
- GGSN and Mobile IP Service in a Single System Configuration Example
- Mobile-IP and Proxy-MIP Timer Considerations
- Session Tracing
- Troubleshooting the Service
- 3GPP ULI Reporting Support Enhanced
- Backup and Recovery of Key KPI Statistics
- Bulkstats for Average Data Rate per IPPOOL
- CoA, RADIUS DM, and Session Redirection (Hotlining)
- Direct Tunnel for 4G (LTE) Networks
- Embed IMSI into Session Id
- Enabling S6b for IMS APN
- Extended QCI Options
- GGSN UPC Collision Handling
- GRE Protocol Interface
- Gx Interface Support
- Gy Interface Support
- ICAP Interface Support
- IP Header Compression
- IP Pool Sharing Protocol
- IPv6 Prefix Delegation from the RADIUS Server and the Local Pool
- L2TP Access Concentrator
- L2TP Network Server
- Mobile IP Registration Revocation
- Multimedia Broadcast and Multicast Service
- Multi-Protocol Label Switching (MPLS) Support
- Revised Marking for Subscriber Traffic
- Rejection/Redirection of HA Sessions on Network Failures
- Policy Forwarding
- Proxy-Mobile IP
- QoS Management
- Remote Address-based RADIUS Accounting
- Routing Behind the Mobile Station on an APN
- Rf Interface Support
- Separation of 2G, 3G, and 4G Bulkstatistics
- Subscriber Overcharging Protection
- TEID Collision with ULI Change
- Traffic Policing and Shaping
- Type of Service/Traffic Class Configuration for Predefined Rules
- Engineering Rules
GGSN Administration Guide, StarOS Release 21.14
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 27, 2019
Feedback