- About this Guide
- SAE Gateway Overview
- SAE Gateway Configuration
- Monitoring the Service
- 3GPP Changes to the Gx Interface
- 5G NSA for SAEGW
- APN-Backoff Timer Support
- Backup and Recovery of Key KPI Statistics
- Bulkstats for GTP-C Messages by ARP Value
- CoA, RADIUS DM, and Session Redirection (Hotlining)
- Collision Handling on the P-GW/SAEGW/S-GW
- Disable Cause Source Enhancement
- Direct Tunnel for 4G (LTE) Networks
- Dynamic Guaranteed Bit Rate
- Embed IMSI into Session Id
- Enabling S6b for IMS APN
- Expanded Prioritization for VoLTE/Emergency Calls
- Extended QCI Options
- GGSN UPC Collision Handling
- GRE Protocol Interface
- GTP-based S2b Interface Support on the P-GW and SAEGW
- 3GPP R12 GTP-C Load and Overload Control Support on the P-GW, SAEGW, and S-GW
- Gx Interface Support
- Gx Support for eMPS
- Gy Interface Support
- Gy Failure Handling Enhancement
- HSS and PCRF Based P-CSCF Restoration Support
- ICAP Interface Support
- Increase in Monitoring of Peers Supported Through Heartbeat Mechanism for PMIP Sessions
- L2TP Access Concentrator
- LBO Restriction on Downlink and Uplink Data Volume Transfer
- LTE to Wi-Fi (S2bGTP) Seamless Handover
- Mobile IP Registration Revocation
- Multi-Protocol Label Switching (MPLS) Support
- Multiple IP Versions Support
- NetLoc for WiFi EPC
- Network Mobility (NEMO)
- NEMO PMIPv6 Heartbeat on LMA
- Network Service Headers (NSH)
- Operator Policy
- Overcharging Protection Support
- Paging Policy Differentiation
- P-GW Handoff KPIs for VoWiFi
- Presence Reporting Area
- Proxy-Mobile IP
- Revised Marking for Subscriber Traffic
- Rf Interface Support
- Routing Behind the Mobile Station on an APN
- Separation of 2G, 3G, and 4G Bulkstatistics
- Session Tracing
- S-GW Event Reporting
- S-GW Paging Enhancements
- S-GW Restoration Support
- Support for One Million S1-U Peer-to-Peer Connections
- Traffic Policing and Shaping
- Type of Service/Traffic Class Configuration for Predefined Rules
- S-GW Engineering Rules
- P-GW Engineering Rules
SAEGW Administration Guide, StarOS Release 21.14
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 27, 2019
Feedback