Release Notes for Cisco Embedded Wireless Controller on Catalyst Access Points, Cisco IOS XE Amsterdam 17.2.1
Introduction to Cisco Embedded Wireless Controller on Catalyst Access Points
The Cisco Embedded Wireless Controller on Catalyst Access Points is a version of the Cisco IOS XE-based controller software on Catalyst access points. In this solution, a Catalyst access point (AP) that is running the Cisco Embedded Wireless Controller on Catalyst Access Points software, is designated as the primary AP. Other APs, referred to as subordinate APs, associate to this primary AP.
The Cisco Embedded Wireless Controller on Catalyst Access Points provides enterprise-level WLAN features while maintaining operational simplicity and affordability. This solution is targeted at small and medium-sized business (SMB) customers or distributed enterprises, and can be run at single site deployments.
-
The controllers come with high availability (HA) and seamless software updates. This keeps your services on always, both during planned and unplanned events.
-
The deployment can be managed using a mobile application, Cisco Digital Network Architecture (DNA) Center, Netconf/Restconf, web-based GUI, or CLI.
What's New in Cisco IOS XE Amsterdam 17.2.1a
There are no new features or enhancements in this release.
What's New in Cisco IOS XE Amsterdam 17.2.1
This section provides information about the new features and enhancements in this release.
Cisco Workgroup Bridges Client Support: A workgroup bridge (WGB) is a mode that can be configured on Cisco Wave 2 APs such as Cisco Aironet 2800 Series APs, Cisco Aironet 3800 Series APs, and Cisco Aironet 1560 Series APs, to provide wireless connectivity to a lightweight AP on behalf of clients that are connected by Ethernet to the WGB access point.
Flexible NetFlow Exporter Support: Flexible Netflow (FnF) Exporter is supported on Embedded Wireless Controller.
Web UI features:
WLAN Web UI Simplification: From Cisco IOS XE Amsterdam 17.2.1 onwards, the Web UI for WLAN creation is simplified. Only mandatory attributes are displayed under the Basic Wireless Setup. The association of the AAA server per WLAN also has been simplified.
New and Modified Commands
The following commands are introduced in the Embedded Wireless Controller, in this release:
Configuration Commands:
-
ccx aironet-iesupport
-
exporter default-flow-exporter
-
flow exporter flow-export-name
-
flow monitor monitor-name
-
ipv4 flow monitor monitor-name input
-
ipv4 flow monitor monitor-name output
-
ipv6 flow monitor monitor-name input
-
ipv6 flow monitor monitor-name output
-
record wireless avc basic
-
transport udp port-value
Show Commands:
-
show platform software wlavc status cp-exporter
-
show wireless wgb client mac-address MAC-address detail
-
show wireless wgb mac-address MAC-address detail
-
show wireless wgb summary
Behavior Change
-
SMU: AP Service Pack APSP is not supported in Cisco IOS XE Amsterdam 17.2.1.
Supported Cisco Access Point Platforms
The following Cisco access points are supported in the Cisco Embedded Wireless Controller on Catalyst Access Points network. Note that the APs listed as primary APs can also function as subordinate APs.
Primary AP |
Subordinate AP |
---|---|
Cisco Catalyst 9115 Series Cisco Catalyst 9117 Series Cisco Catalyst 9120 Series Cisco Catalyst 9130 Series |
Cisco Aironet 1540 Series Cisco Aironet 1560 Series Cisco Aironet 1815i Cisco Aironet 1815w Cisco Aironet 1830 Series Cisco Aironet 1840 Series Cisco Aironet 1850 Series Cisco Aironet 2800 Series Cisco Aironet 3800 Series Cisco Aironet 4800 Series Cisco Catalyst 9115 Series Cisco Catalyst 9117 Series Cisco Catalyst 9120 Series Cisco Catalyst 9130 Series |
Image Type |
Supported APs |
---|---|
ap1g4 |
Cisco Aironet 1810 Series Cisco Aironet 1830 Series Cisco Aironet 1850 Series |
ap1g5 |
Cisco Aironet 1815i Cisco Aironet 1815w Cisco Aironet 1540 Series Cisco Aironet 1840 Series |
ap1g6 |
Cisco Catalyst 9117 Series |
ap1g6a |
Cisco Catalyst 9130 Series |
ap1g7 |
Cisco Catalyst 9115 Series Cisco Catalyst 9120 Series |
ap3g3 |
Cisco Aironet 2800 Series Cisco Aironet 3800 Series Cisco Aironet 4800 Series Cisco Aironet 1560 Series |
Maximum APs and Clients Supported
Primary AP Model |
Maximum APs Supported |
Maximum Clients Supported |
---|---|---|
Cisco Catalyst 9105 AWI |
50 |
1000 |
Cisco Catalyst 9115 Series |
50 |
1000 |
Cisco Catalyst 9117 Series |
50 |
1000 |
Cisco Catalyst 9120 Series |
100 |
2000 |
Cisco Catalyst 9130 Series |
100 |
2000 |
Note |
If 25 to 100 APs have joined the EWC network, the maximum clients on the EWC internal AP is limited to 20. |
Compatibility Matrix
The following table provides software compatibility information:
Cisco Embedded Wireless Controller on Catalyst Access Points |
Cisco ISE |
Cisco CMX |
Cisco DNA Center |
---|---|---|---|
Amsterdam 17.2.1a Amsterdam 17.2.1 |
2.6 2.4 2.3 |
10.6.2 10.6 10.5.1 |
1.3.3.0 |
Supported Browsers and Operating Systems for Web UI
Note |
The following list of Supported Browsers and Operating Systems is not comprehensive at the time of writing this document and the behavior of various browser for accessing the GUI of the EWC is as listed below. |
Browser |
Version |
Operating System |
Status |
Workaround |
---|---|---|---|---|
Google Chrome |
77.0.3865.120 |
macOS Mojave Version 10.14.6 |
Works |
Proceed through the browser warning. |
Safari |
13.0.2 (14608.2.40.1.3) |
macOS Mojave Version 10.14.6 |
Works |
Proceed through the browser warning. |
Mozilla Firefox |
69.0.1 |
macOS Mojave Version 10.14.6 |
Works only if exception is added. |
Set the exception. |
Mozilla Firefox |
69.0.3 |
macOS Mojave Version 10.14.6 |
Works only if exception is added. |
Set the exception. |
Google Chrome |
77.0.3865.90 |
Windows 10 Version 1903 (OS Build 18362.267) |
Works |
Proceed through the browser warning. |
Microsoft Edge |
44.18362.267.0 |
Windows 10 Version 1903 (OS Build 18362.267) |
Works |
Proceed through the browser warning. |
Mozilla Firefox |
68.0.2 |
Windows 10 Version 1903 (OS Build 18362.267) |
Works |
Proceed through the browser warning. |
Mozilla Firefox |
69.0.3 |
Windows 10 Version 1903 (OS Build 18362.267) |
Works only if exception is added. |
Set the exception. |
Google Chrome |
78.0.3904.108 |
macOS Catalina 10.15.1 |
Does not work |
NA |
Upgrading the Controller Software
This section covers the various aspects of upgrading the controller software.
Note |
Before converting from CAPWAP to embedded wireless controller (EWC), ensure that you upgrade the corresponding AP with the CAPWAP image in Cisco AireOS Release 8.10.105.0. If this upgrade is not performed, the conversion will fail. |
Finding the Software Version
The following table lists the Cisco IOS XE 17.2.1 software for Cisco Embedded Wireless Controller on Catalyst Access Points.
Choose the appropriate AP software based on the following:
-
Cisco Embedded Wireless Controller on Catalyst Access Points software to be used for converting the AP from an unified wireless network CAPWAP lightweight AP to a Cisco Embedded Wireless Controller on Catalyst Access Points-capable AP (primary AP)
-
AP software image bundle to be used either for upgrading the Cisco Embedded Wireless Controller on Catalyst Access Points software on the primary AP or for updating the software on the subordinate APs or both
Prior to ordering Cisco APs, see the corresponding ordering guide for your Catalyst or Aironet access point.
Primary AP |
AP Software for Conversion from CAPWAP to Cisco EWC |
AP Software Image Bundle for Upgrade |
AP Software in the Bundle |
---|---|---|---|
Cisco Catalyst 9115 Series |
C9800-AP-universalk9.17.02.01.zip |
C9800-AP-universalk9.17.02.01.zip |
ap1g7 |
Cisco Catalyst 9117 Series |
C9800-AP-universalk9.17.02.01.zip |
C9800-AP-universalk9.17.02.01.zip |
ap1g6 |
Cisco Catalyst 9120 Series |
C9800-AP-universalk9.17.02.01.zip |
C9800-AP-universalk9.17.02.01.zip |
ap1g7 |
Cisco Catalyst 9130 Series |
C9800-AP-universalk9.17.02.01.zip |
C9800-AP-universalk9.17.02.01.zip |
ap1g6a |
Guidelines and Restrictions
Internet Group Management Protocol (IGMP)v3 is not supported on Cisco Aironet Wave 2 APs.
Embedded Wireless Controller SNMP configuration is supported in DNAC.
High memory usage on AP running Embedded Wireless Controller. Enabling crash kernel on the AP consumes additional memory on the AP. Hence, if crash kernel is enabled, the overall memory usage of the device will increase and will impact the scale numbers. On Cisco Catalyst 9130 Series Access Points, the memory consumption is a high of 128 MB.
Interoperability with Clients
This section describes the interoperability of the controller software with client devices.
The following table describes the configurations used for testing client devices.
Hardware or Software Parameter |
Hardware or Software Type |
---|---|
Release |
Cisco IOS XE Amsterdam 17.2.1 |
Access Points |
|
Radio |
|
Security |
Open, PSK (WPA2-AES), 802.1X (WPA2-AES) (EAP-FAST, EAP-TLS), WPA3. |
Cisco ISE |
See Compatibility Matrix. |
Types of tests |
Connectivity, traffic (ICMP), and roaming between two APs |
The following table lists the client types on which the tests were conducted. Client types included laptops, hand-held devices, phones, and printers.
Client Type and Name |
Driver / Software Version |
||
---|---|---|---|
Wi-Fi 6 Devices (Mobile Phone and Laptop) |
|||
Apple iPhone 11 | iOS 14.1 | ||
Apple iPhone SE 2020 |
iOS 14.1 | ||
Dell Intel AX1650w | Windows 10 ( 21.90.2.1) | ||
DELL LATITUDE 5491 (Intel AX200) | Windows 10 Pro (21.40.2) | ||
Samsung S20 | Android 10 | ||
Samsung S10 (SM-G973U1) | Android 9.0 (One UI 1.1) | ||
Samsung S10e (SM-G970U1) | Android 9.0 (One UI 1.1) | ||
Samsung Galaxy S10+ | Android 9.0 | ||
Samsung Galaxy Fold 2 |
Android 10 | ||
Samsung Galaxy Flip Z |
Android 10 | ||
Samsung Note 20 |
Android 10 | ||
Laptops |
|||
Acer Aspire E 15 E5-573-3870 (Qualcomm Atheros QCA9377) | Windows 10 Pro (12.0.0.832) | ||
Apple Macbook Air 11 inch | OS Sierra 10.12.6 | ||
Apple Macbook Air 13 inch | OS Catalina 10.15.4 | ||
Apple Macbook Air 13 inch | OS High Sierra 10.13.4 | ||
Macbook Pro Retina | OS Mojave 10.14.3 | ||
Macbook Pro Retina 13 inch early 2015 | OS Mojave 10.14.3 | ||
Dell Inspiron 2020 Chromebook |
Chrome OS 75.0.3770.129 |
||
Google Pixelbook Go |
Chrome OS 84.0.4147.136 |
||
HP chromebook 11a |
Chrome OS 76.0.3809.136 |
||
Samsung Chromebook 4+ |
Chrome OS 77.0.3865.105 |
||
DELL Latitude 3480 (Qualcomm DELL wireless 1820) | Win 10 Pro (12.0.0.242) | ||
DELL Inspiron 15-7569 (Intel Dual Band Wireless-AC 3165) | Windows 10 Home (18.32.0.5) | ||
DELL Latitude E5540 (Intel Dual Band Wireless AC7260) | Windows 7 Professional (21.10.1) | ||
DELL XPS 12 v9250 (Intel Dual Band Wireless AC 8260 ) | Windows 10 (19.50.1.6) | ||
DELL Latitude 5491 (Intel AX200) | Windows 10 Pro (21.40.2) | ||
DELL XPS Latitude12 9250 (Intel Dual Band Wireless AC 8260) | Windows 10 Home (21.40.0) | ||
Lenovo Yoga C630 Snapdragon 850 (Qualcomm AC 2x2 Svc) |
Windows 10(1.0.10440.0) |
||
Lenovo Thinkpad Yoga 460 (Intel Dual Band Wireless-AC 9260) | Windows 10 Pro ( 21.40.0) | ||
|
|||
Tablets |
|||
Apple iPad Pro | iOS 13.5 | ||
Apple iPad Air2 MGLW2LL/A | iOS 12.4.1 | ||
Apple iPad Mini 4 9.0.1 MK872LL/A | iOS 11.4.1 | ||
Apple iPad Mini 2 ME279LL/A | iOS 12.0 | ||
Microsoft Surface Pro 3 – 11ac | Qualcomm Atheros QCA61x4A | ||
Microsoft Surface Pro 3 – 11ax | Intel AX201 chipset. Driver v21.40.1.3 | ||
Microsoft Surface Pro 7 – 11ax | Intel Wi-Fi chip (HarrisonPeak AX201) (11ax, WPA3) | ||
Microsoft Surface Pro X – 11ac & WPA3 | WCN3998 Wi-Fi Chip (11ac, WPA3) | ||
Mobile Phones |
|||
Apple iPhone 5 | iOS 12.4.1 | ||
Apple iPhone 6s | iOS 13.5 | ||
Apple iPhone 8 | iOS 13.5 | ||
Apple iPhone X MQA52LL/A | iOS 13.5 | ||
Apple iPhone 11 | iOS 14.1 | ||
Apple iPhone SE MLY12LL/A | iOS 11.3 | ||
ASCOM SH1 Myco2 | Build 2.1 | ||
ASCOM SH1 Myco2 | Build 4.5 | ||
ASCOM Myco 3 v1.2.3 | Android 8.1 | ||
Drager Delta | VG9.0.2 | ||
Drager M300.3 | VG2.4 | ||
Drager M300.4 | VG2.4 | ||
Drager M540 | DG6.0.2 (1.2.6) | ||
Google Pixel 2 | Android 10 | ||
Google Pixel 3 | Android 11 | ||
Google Pixel 3a |
Android 11 |
||
Google Pixel 4 | Android 11 | ||
Huawei Mate 20 pro | Android 9.0 | ||
Huawei P20 Pro | Android 9.0 | ||
Huawei P40 |
Android 10 |
||
LG v40 ThinQ | Android 9.0 | ||
One Plus 8 |
Android 10 |
||
Oppo Find X2 |
Android 10 |
||
Redmi K20 Pro |
Android 10 |
||
Samsung Galaxy S7 | Andriod 6.0.1 | ||
Samsung Galaxy S7 SM - G930F | Android 8.0 | ||
Samsung Galaxy S8 | Android 8.0 | ||
Samsung Galaxy S9+ - G965U1 | Android 9.0 | ||
Samsung Galaxy SM - G950U | Android 7.0 | ||
Sony Experia 1 ii |
Android 10 |
||
Sony Experia xz3 | Android 9.0 | ||
Xiaomi Mi10 |
Android 10 |
||
Spectralink 8744 | Android 5.1.1 | ||
Spectralink Versity Phones 9540 | Android 8.1 | ||
Vocera Badges B3000n | 4.3.2.5 | ||
Vocera Smart Badges V5000 | 5.0.4.30 | ||
Zebra MC40 | Android 5.0 | ||
Zebra MC40N0 | Android Ver: 4.1.1 | ||
Zebra MC92N0 | Android Ver: 4.4.4 | ||
Zebra TC51 | Android 7.1.2 | ||
Zebra TC52 | Android 8.1.0 | ||
Zebra TC55 | Android 8.1.0 | ||
Zebra TC57 | Android 8.1.0 | ||
Zebra TC70 | Android 6.1 | ||
Zebra TC75 | Android 6.1.1 | ||
Printers | |||
Zebra QLn320 Printer | LINK OS 6.3 | ||
Zebra ZT230 Printer | LINK OS 6.3 | ||
Zebra ZQ310 Printer | LINK OS 6.3 | ||
Zebra ZD410 Printer | LINK OS 6.3 | ||
Zebra ZT410 Printer | LINK OS 6.3 | ||
Zebra ZQ610 Printer | LINK OS 6.3 | ||
Zebra ZQ620 Printer | LINK OS 6.3 | ||
Wireless Module |
|||
Intel 11ax 200 |
Driver v22.20.0 | ||
Intel AC 9260 |
Driver v21.40.0 | ||
Intel Dual Band Wireless AC 8260 |
Driver v19.50.1.6 |
Caveats
Caveats describe unexpected behavior in Cisco IOS releases. Caveats that are listed as Open in a prior release are carried forward to the next release as either Open or Resolved.
Note |
All incremental releases will cover fixes from the current release. |
Cisco Bug Search Tool
The Cisco Bug Search Tool (BST) allows partners and customers to search for software bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version. The BST is designed to improve the effectiveness in network risk management and device troubleshooting. The tool has a provision to filter bugs based on credentials to provide external and internal bug views for the search input.
To view the details of a caveat, click the corresponding identifier.
Open Caveats for Cisco IOS XE Amsterdam 17.2.1a
Caveat ID |
Description |
---|---|
Cisco Aironet AP 185x/184x reboots by deadlock triggered kernel panic in radio driver code. |
Open Caveats for Cisco IOS XE Amsterdam 17.2.1
Caveat ID |
Description |
---|---|
Correct the severity level of logs generated by smart-agent from notice to debug. |
|
Client traffic is stuck, after controller receives the Change of Authorization (CoA) as part of Local Web Authentication (LWA) and Central Web Authentication (CWA). |
|
Current Tx rate for 802.11ax clients are displayed incorrectly on the controller. |
|
Deny webauth WLANs from being tagged to authentication servers that has load balancing enabled. |
|
Controller is allowing WPA-TKIP + WPA2‚ without any encryption. |
|
Client is unable to associate when extended supported rates are used. |
|
AP shows incorrect WLAN to VLAN assignment. |
|
AP shows incorrect WLAN to VLAN assignment. |
|
Controller reloads unexpectedly when an AP with same name of an existing AP joins. |
|
Cisco Catalyst 9800 Series Wireless Controller Address Resolution Protocol (ARP) handling design change. |
|
Roaming is not successful when NAC is enabled in the policy profile. |
|
Remove all client lists from the show tech wireless command output. |
|
The show ap auto RF command output is displaying invalid values for some APs. |
|
Controller is unable to downgrade license. |
|
CSCvt55482 |
Controller displays incorrect number of interferers. |
Resolved Caveats for Cisco IOS XE Amsterdam 17.2.1a
Caveat ID |
Description |
---|---|
IW-6300H/1562/2800/3800/4800 series APs are failing DFS compliance. |
|
Channel Availability Check (CAC) is skipped after channel change on 2800/3800/4800/1560/IW6300. |
|
Wave 2 AP boot failure with message saying bad lzma header and AP unable to boot and join controller. |
Resolved Caveats for Cisco IOS XE Amsterdam 17.2.1
Caveat ID |
Description |
---|---|
Include the show vlan command output in the show tech wireless command output. |
|
The show wireless profile policy all command output is not displaying Cisco Air Time Fairness (ATF) information. |
|
WPA-TKIP with Advanced Encryption Standard (AES) is set as required in web UI. |
|
Remove all standby R0 commands from the show tech wireless command output. |
|
Protected Management Frame (PMF) mandatory Preshared Key (PSK) configuration doesn't give an option to input the PSK. |
|
Error is reported after a successful client association. |
|
WNCD crash is observed. |
|
Controller unexpectedly reloads while executing flex CI suite. |
|
The show wireless interface summary command output is not showing NAT public-ip. |
|
When RADIUS server name is configures as %0, it shows up as #CLI on the web UI and CLI. |
|
Central Web-Auth local switching Layer 3 VLAN override is snot working. |
|
MAC congested @Low PPS, drops/TX_XOFF in Bay 0-Tune settings and pause frames in mgig ports. |
|
External web authentication log out page is not working. |
|
OpenDNS resolver IPs are not coming with NETCONF/RESTCONF with defaults. |
|
The show hw-module subslot 0/1 transceiver 0 idprom brief command failed to show any output. |
|
UDP 1518 byte upstream packets are dropped from Cisco Catalyst 9800 Wireless Controller for Cloud hosted on Hyper-V, when MTU is set to 1496. |
|
Simplify WLAN configuration for Layer 2 and Layer 3 security options. |
|
The show ap auto-rf dot11 24ghz command output is not displaying entries of Cisco Aironet 4800 AP, after a day. |
|
Core files under standby bootflash is shown twice on the web UI. |
|
Controller is displaying wncd crash@ewlc_dgram_msg_and_msgbuf_free message with In-Service Software Upgrade (ISSU) flow in scale. |
|
Controller deauthenticates client when receiving DHCP release from the client. |
|
System displays memory warning during controller image download. |
|
Traceback is observed on the standby controller while unconfiguring port-channel. |
|
QoS police configuration is deleted after adding or removing it to policy profile using web UI. |
|
Controller is sending delete event for AP impersonation. |
|
Wired multicast Domain Name System (mDNS) packet is getting punted to WNCD. |
|
Client is stuck in IP learn state with flex mode AP. |
|
Web UI is not displaying slot-2 details in 360 degree view. |
|
NETCONF/RESTCONF server is not reachable after a switchover. |
|
Stack_mgr process logs only the internal btrace logs. |
|
Cisco Catalyst 9800-L Wireless Controller HA: Traceback is observed after reload. |
|
Backhaul configuration for PSK is showing error as resource not found. |
|
Off-channel interference is not being reported. |
|
Update & Apply to Device button is not working after configuring FT-PSK with WPA2+WPA3 in web UI. |
|
Btman core has been observed. |
|
Print a warning message during packet (SWPortMacConflict) drop. |
|
Unable to enter a valid URL for urlfilter. |
|
Frequent AP channel changes are observed on the 5GHz band radio. |
|
IPv6 dual stack is not working. |
|
Client retries and Rx packets on Cisco DNA Centre is different from the value seen on the AP. |
|
Though dynamic channel allocation (DCA) is set to be OFF, it is still assigning channels to AP radios. |
|
Controller is not able to display medium power when AP sends 25W message. |
|
Controller is not sending redirect URL if client is already trying to authenticate. |
|
Unable to configure SNMP settings using GUI in Japanese mode. |
|
EWC WEBUI:Extend button does not do anything in the Day 0 session expiry pop-up. |
Troubleshooting
For the most up-to-date, detailed troubleshooting information, visit the Cisco TAC website at:
https://www.cisco.com/en/US/support/index.html
Go to Product Support and select your product from the list, or enter the name of your product. Look under Troubleshoot and Alerts to find information about the problem that you are experiencing.
Related Documentation
Information about Cisco IOS XE 16 is available at:
https://www.cisco.com/c/en/us/products/ios-nx-os-software/ios-xe/index.html
All the support documentation for Cisco Catalyst 9100 Access Points are available at: https://www.cisco.com/c/en/us/support/wireless/catalyst-9100ax-access-points/tsd-products-support-series-home.html
Cisco Validated Designs documents are available at:
https://www.cisco.com/go/designzone
Cisco Embedded Wireless Controller on Catalyst Access Points
For support information, see the following documents:
-
Cisco Embedded Wireless Controller on Catalyst Access Points Online Help
-
Cisco Embedded Wireless Controller on Catalyst Access Points Software Configuration Guide
-
Cisco Embedded Wireless Controller on Catalyst Access Points Command Reference Guide
Installation guides for Catalyst Access Points are available at:
For all Cisco Wireless Controller software-related documentation, see:
Wireless Products Comparison
-
Use this tool to compare the specifications of Cisco wireless APs and controllers:
https://www.cisco.com/c/en/us/products/wireless/wireless-lan-controller/product-comparison.html
-
Product Approval Status:
-
Wireless LAN Compliance Lookup:
https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html
Cisco Mobility Services Engine
Cisco Connected Mobile Experiences
Cisco DNA Center
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.