- About this Guide
- 5G Architecture
- 5G SMF Overview
- Deploying and Configuring SMF through Ops Center
- Smart Licensing
- SMF Rolling Software Update
- Pods and Services Reference
- 3GPP Specification Compliance for SMF Interfaces
- 4G to 5G Data Session Handover Support
- 5GSM Cause Handling
- AN Modification Call Flow Support
- Application-based Alerts
- Bulk Statistics and Key Performance Indicators
- Cisco Common Data Layer
- CHF and PCF Integration for Access and Mobility Procedures
- Content Filtering, Event Detail Records, and X-Header Enrichment Support
- Customization of StarOS-based UPF on N4 Interface
- Customized Configuration for Controlling Subscription Messages over N10
- DNS Proxy Integration
- DSCP Marking
- EPS Interworking
- Flow Failure Handling for Access and Mobility Procedures
- Inter gNodeB Handover
- IP Address Management
- Load-based Selection of UPF
- Monitor Subscriber and Monitor Protocol
- Multiple and Virtual DNN Support
- Network-initiated Messages Support
- Network-Initiated Service Request
- NRF Discovery
- Packet Data Unit Sessions Establishment from 4G-Only and Option 3x Capable Devices
- Peer NF Failure Handling Support
- Protocol Data Unit RAN Tunnel Endpoint Identifier Session
- Policy and User Plane Management
- RADIUS Client
- RPC Remote Host Management
- Resource Management
- Router Solicit and Router Advertisement
- Session and Service Continuity Mode
- SMF Charging
- SMF Deregistration with NRF
- SMF Overload Protection
- Support for the Unsubscribe-To-Notifications Messages
- SMF Interface for Metrics
- System Logging Support Per SUPI
- Timers Support
- UDP Proxy for SMF
- UPF Path Management and Restoration
- Voice over New Radio
- VoLTE Support
- VoWiFi Support
- Wi-Fi Handovers
- Wireless Priority Services
- 5G SMF Serviceability CLI Enhancements
- Troubleshooting Information
- Sample SMF Configuration
UCC 5G SMF Configuration and Administration Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- September 23, 2020
Feedback