Ultra Cloud Clore Subscriber Management Infrastructure
Introduction
This Release Notes identifies changes and issues related to this software release.
Release Lifecycle Milestones
|
Release Lifecycle Milestone |
Milestone |
Date |
|---|---|---|
|
First Customer Ship |
FCS |
31-Jul-2024 |
|
End of Life |
EoL |
31-Jul-2024 |
|
End of Software Maintenance |
EoSM |
29-Jan-2026 |
|
End of Vulnerability and Security Support |
EoVSS |
29-Jan-2026 |
|
Last Date of Support |
LDoS |
31-Jan-2027 |
These milestones and the intervals between them are defined in the Cisco Ultra Cloud Core (UCC) Software Release Lifecycle Product Bulletin available on cisco.com.
Release Package Version Information
|
Software Packages |
Version |
|---|---|
|
smi-install-disk.20.04.0-20240709.iso.SPA.tgz |
20.04.0-20240709 |
|
cee-2024.03.1.13.SPA.tgz |
2024.03.1.13 |
|
cluster-deployer-2024.03.1.13.SPA.tgz |
2024.03.1.13 |
|
NED Package |
ncs-6.1.3-cisco-cee-nc-2024.03.1.13 ncs-6.1.3-cisco-smi-nc-2024.03.1.13 |
|
NSO |
6.1.3 |
Descriptions for the various packages provided with this release are provided in the Release Package Descriptions section.
Verified Compatibility
|
UCS Server |
CIMC Firmware Version |
|---|---|
|
Cisco UCS C220 M7 |
4.3(3.240022) |
|
Cisco UCS C220 M6 |
4.2(2a) or later |
|
Cisco UCS C220 M5 |
4.1(3f) or later Version 4.3.2.240009 is qualified with this release. |
-
For deployment of C-Series M6 and M7 servers, it is mandatory to enable secure boot on the servers.
-
For C-Series M5 servers, it is recommended to use UEFI boot mode and enable secure boot for more security. This will align the older hardware settings with the newer hardware requirements.
What's New in this Release
There are no features or enhancements in this release.
Installation and Upgrade Notes
This Release Note does not contain general installation and upgrade instructions. Refer to the existing installation documentation for specific installation and upgrade considerations.
 Note |
In this release, you must install a patch to use all SMI functionalities. For more information, contact your Cisco account representative. |
Software Integrity Verification
To verify the integrity of the software image you have from Cisco, you can validate the SHA512 checksum information against the checksum identified by Cisco for the software.
Image checksum information is available through Cisco.com Software Download Details. To find the checksum, hover the mouse pointer over the software image you have downloaded.
At the bottom you find the SHA512 checksum, if you do not see the whole checksum you can expand it by pressing the "..." at the end.
To validate the information, calculate a SHA512 checksum using the information in the following table and verify that it matches with the one provided on the software download page.
To calculate a SHA512 checksum on your local desktop, refer to the following table please.
|
Operating System |
SHA512 Checksum Calculation Command Examples |
|---|---|
|
Microsoft Windows |
Open a command line window and type the following command: |
|
Apple MAC |
Open a terminal window and type the following command: |
|
Linux |
Open a terminal window and type the following command: Or |
|
NOTES: <filename> is the name of the file. <extension> is the file extension (e.g. .zip or .tgz). |
|
If the SHA512 checksum matches, you can be sure that no one has tampered with the software image, or the image has not been corrupted during download.
If the SHA512 checksum does not match, we advise you to not attempt upgrading any systems with the corrupted software image. Download the software again and verify the SHA512 checksum again. If there is a constant mismatch, please open a case with the Cisco Technical Assistance Center.
Certificate Validation
SMI software images are signed via x509 certificates. Please view the .README file packaged with the software for information and instructions on how to validate the certificates.
Open Bugs for this Release
There are no open bugs in this specific software release.
Resolved Bugs for this Release
The following table lists the resolved bugs in this specific software release.
Note |
This software release may contain resolved bugs first identified in other releases. Additional information for all resolved bugs are available in the Cisco Bug Search Tool. |
|
Bug ID |
Headline |
Behavior Change |
|---|---|---|
|
Dual-stack deployment config is invisible |
No |
Operator Notes
Cloud Native Product Version Numbering System
The show helm list command displays detailed information about the version of the cloud native product currently deployed.
The appropriate version number field increments after a version has been released. The new version numbering format is a contiguous sequential number that represents incremental changes between releases. This format facilitates identifying the changes between releases when using Bug Search Tool to research software releases.
Release Package Descriptions
The following table lists the descriptions for packages that are available with this release.
|
Software Packages |
Description |
|---|---|
|
base.<version>.iso.SPA.tgz |
The application-level POD ISO image signature package for use with bare metal deployments. This package contains the base ISO image as well as the release signature, certificate, and verification information. |
|
cee.<version>SPA.tgz |
The SMI Common Execution Environment (CEE) offline release signature package. This package contains the CEE deployment package as well as the release signature, certificate, and verification information. |
|
cluster-deployer-<version>.SPA.tgz |
The SMI Deployer image signature package for use with bare metal deployments. This package contains the Deployer image as well as the release signature, certificate, and verification information. |
Feedback