Ejemplo de Configuración de PIX/ASA 7.x PIX-to-PIX Dinámico-Static IPsec con NAT y Cliente VPN

Opciones de descarga

PDF (163.2 KB)
Visualice con Adobe Reader en una variedad de dispositivos
ePub (101.3 KB)
Visualice en diferentes aplicaciones en iPhone, iPad, Android, Sony Reader o Windows Phone
Mobi (Kindle) (128.4 KB)
Visualice en dispositivo Kindle o aplicación Kindle en múltiples dispositivos

Actualizado:3 de mayo de 2007

ID del documento:63876

Lenguaje no discriminatorio

El conjunto de documentos para este producto aspira al uso de un lenguaje no discriminatorio. A los fines de esta documentación, "no discriminatorio" se refiere al lenguaje que no implica discriminación por motivos de edad, discapacidad, género, identidad de raza, identidad étnica, orientación sexual, nivel socioeconómico e interseccionalidad. Puede haber excepciones en la documentación debido al lenguaje que se encuentra ya en las interfaces de usuario del software del producto, el lenguaje utilizado en función de la documentación de la RFP o el lenguaje utilizado por un producto de terceros al que se hace referencia. Obtenga más información sobre cómo Cisco utiliza el lenguaje inclusivo.

Acerca de esta traducción

Cisco ha traducido este documento combinando la traducción automática y los recursos humanos a fin de ofrecer a nuestros usuarios en todo el mundo contenido en su propio idioma. Tenga en cuenta que incluso la mejor traducción automática podría no ser tan precisa como la proporcionada por un traductor profesional. Cisco Systems, Inc. no asume ninguna responsabilidad por la precisión de estas traducciones y recomienda remitirse siempre al documento original escrito en inglés (insertar vínculo URL).

Contenido

Introducción

Prerequisites

Requirements

Componentes Utilizados

Convenciones

Configurar

Diagrama de la red

Configuraciones

Verificación

Troubleshoot

Claves previamente compartidas idénticas

Comandos para resolución de problemas

Ejemplos de Salida de Debug Correcto

Información Relacionada

Introducción

En la mayoría de los casos, un PIX remoto que conecta con un PIX central no utiliza la Traducción de Dirección de Red (NAT). En su lugar, el PIX remoto utiliza una dirección IP externa estática. El caso de un PIX central que ejecuta 7.x y posteriores y conecta con un PIX remoto mediante NAT, es el mismo que una pequeña oficina en el hogar como un PIX 501 o 506 conectado con un módem de cable o DLS mediante DHCP (Dynamic Host Control Protocol). PIX 7.x y posteriores y Cisco Adaptive Security Device Manager (ASDM) no se ejecutan en un PIX 501 o 506. Por lo tanto, para este ejemplo el PIX remoto con DHCP y NAT se supone que es un PIX 501 o 506 que ejecuta el código 6.x. Esta configuración permite que el PIX central acepte conexiones IPSec dinámicas. El PIX remoto utiliza NAT para unirse a los dispositivos con dirección privada de detrás con la red de dirección privada que se encuentra tras el PIX central. El PIX remoto puede iniciar conexiones con el PIX central (sabe cuál es el punto final), aunque el PIX central no puede iniciar conexiones con el PIX remoto (no sabe cuál es el punto final).

En esta configuración de ejemplo, Tigre es el PIX remoto y León es el PIX central. Dado que se desconoce la dirección IP de Tiger, debe configurar Lion para que acepte dinámicamente las conexiones desde cualquier lugar que conozca la clave comodín previamente compartida. Tiger sabe qué tráfico se cifrará (porque lo especifica la lista de acceso) y dónde se encuentra el terminal de León. Tiger debe iniciar la conexión. Ambos lados realizan NAT y NAT 0 para eludir NAT para el tráfico IPsec.

Además, el usuario remoto en esta configuración se conecta con el PIX central (León) mediante Cisco VPN Client 4.x. El usuario remoto no puede conectarse al PIX remoto (Tiger) ya que ambos lados han asignado dinámicamente direcciones IP y no saben dónde enviar la solicitud.

Consulte Configuración de PIX a PIX de IPsec dinámico a estático con NAT y Cisco VPN Client para obtener más información sobre el mismo escenario en PIX 6.x con Cisco VPN Client 3.x.

Prerequisites

Requirements

No hay requisitos específicos para este documento.

Componentes Utilizados

La información que contiene este documento se basa en las siguientes versiones de software y hardware.

Software Cisco PIX Firewall versión 7.x y posterior (PIX central)
Software Cisco PIX Firewall versión 6.3.4 (PIX remoto)
Cisco VPN Client versión 4.x

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Convenciones

Consulte Convenciones de Consejos TécnicosCisco para obtener más información sobre las convenciones del documento.

Configurar

En esta sección encontrará la información para configurar las funciones descritas en este documento.

Nota: Utilice la herramienta Command Lookup (sólo para clientes registrados) para obtener más información sobre los comandos utilizados en esta sección.

Diagrama de la red

En este documento, se utiliza esta configuración de red:

Configuraciones

En este documento, se utilizan estas configuraciones:

León
Tigre

León
PIX Version 7.0(0) names ! interface Ethernet0 nameif outside security-level 0 ip address 172.18.124.166 255.255.255.0 ! interface Ethernet1 nameif inside security-level 100 ip address 10.2.2.1 255.255.255.0 ! interface Ethernet2 shutdown nameif intf2 security-level 4 no ip address ! interface Ethernet3 shutdown nameif intf3 security-level 6 no ip address ! interface Ethernet4 shutdown nameif intf4 security-level 8 no ip address ! interface Ethernet5 shutdown nameif intf5 security-level 10 no ip address ! enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname lion domain-name cisco.com boot system flash:/image.bin ftp mode passive access-list 100 extended permit ip 10.2.2.0 255.255.255.0 10.1.1.0 255.255.255.0 access-list 100 extended permit ip 10.2.2.0 255.255.255.0 10.3.3.0 255.255.255.0 pager lines 24 mtu outside 1500 mtu inside 1500 mtu intf2 1500 mtu intf3 1500 mtu intf4 1500 mtu intf5 1500 ip local pool clientpool 10.3.3.1-10.3.3.10 no failover monitor-interface outside monitor-interface inside monitor-interface intf2 monitor-interface intf3 monitor-interface intf4 monitor-interface intf5 asdm image flash:/asdm-501.bin asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list 100 nat (inside) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 172.18.124.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius group-policy unityclient internal group-policy unityclient attributes wins-server value 10.1.1.3 dns-server value 10.1.1.3 vpn-idle-timeout 30 default-domain value cisco.com user-authentication disable username cisco password 3USUcOPFUiMCO4Jk encrypted http server enable http 0.0.0.0 0.0.0.0 outside http 0.0.0.0 0.0.0.0 inside no snmp-server location no snmp-server contact snmp-server community public snmp-server enable traps snmp crypto ipsec transform-set myset esp-des esp-md5-hmac crypto dynamic-map cisco 1 set transform-set myset crypto map dyn-map 20 ipsec-isakmp dynamic cisco crypto map dyn-map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 3600 isakmp policy 65535 authentication pre-share isakmp policy 65535 encryption 3des isakmp policy 65535 hash sha isakmp policy 65535 group 2 isakmp policy 65535 lifetime 86400 telnet timeout 5 ssh timeout 5 ssh version 1 console timeout 0 tunnel-group DefaultL2LGroup type ipsec-l2l tunnel-group DefaultL2LGroup general-attributes authentication-server-group none tunnel-group DefaultL2LGroup ipsec-attributes pre-shared-key * tunnel-group unityclient type ipsec-ra tunnel-group unityclient general-attributes address-pool clientpool authentication-server-group none default-group-policy unityclient tunnel-group unityclient ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect dns maximum-length 512 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global Cryptochecksum:4e20a2153437d60c7f01054808d41b42 : end

León

PIX Version 7.0(0)  
names 
! 
interface Ethernet0 
 nameif outside 
 security-level 0 
 ip address 172.18.124.166 255.255.255.0  
! 
interface Ethernet1 
 nameif inside 
 security-level 100 
 ip address 10.2.2.1 255.255.255.0  
! 
interface Ethernet2 
 shutdown 
 nameif intf2 
 security-level 4 
 no ip address 
! 
interface Ethernet3 
 shutdown 
 nameif intf3 
 security-level 6 
 no ip address 
! 
interface Ethernet4 
 shutdown 
 nameif intf4 
 security-level 8 
 no ip address 
! 
interface Ethernet5 
 shutdown 
 nameif intf5 
 security-level 10 
 no ip address 
! 
enable password 8Ry2YjIyt7RRXU24 encrypted 
passwd 2KFQnbNIdI.2KYOU encrypted 
hostname lion 
domain-name cisco.com 
boot system flash:/image.bin 
ftp mode passive 
access-list 100 extended permit ip 10.2.2.0 255.255.255.0 10.1.1.0 255.255.255.0  
access-list 100 extended permit ip 10.2.2.0 255.255.255.0 10.3.3.0 255.255.255.0  
pager lines 24 
mtu outside 1500 
mtu inside 1500 
mtu intf2 1500 
mtu intf3 1500 
mtu intf4 1500 
mtu intf5 1500 
ip local pool clientpool 10.3.3.1-10.3.3.10 
no failover 
monitor-interface outside 
monitor-interface inside 
monitor-interface intf2 
monitor-interface intf3 
monitor-interface intf4 
monitor-interface intf5 
asdm image flash:/asdm-501.bin 
asdm history enable 
arp timeout 14400 
nat-control 
global (outside) 1 interface 
nat (inside) 0 access-list 100 
nat (inside) 1 0.0.0.0 0.0.0.0 
route outside 0.0.0.0 0.0.0.0 172.18.124.1 1 
timeout xlate 3:00:00 
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00 
timeout uauth 0:05:00 absolute 
aaa-server TACACS+ protocol tacacs+ 
aaa-server RADIUS protocol radius 
group-policy unityclient internal 
group-policy unityclient attributes 
 wins-server value 10.1.1.3 
 dns-server value 10.1.1.3 
 vpn-idle-timeout 30 
 default-domain value cisco.com 
 user-authentication disable 
username cisco password 3USUcOPFUiMCO4Jk encrypted 
http server enable 
http 0.0.0.0 0.0.0.0 outside 
http 0.0.0.0 0.0.0.0 inside 
no snmp-server location 
no snmp-server contact 
snmp-server community public 
snmp-server enable traps snmp 
crypto ipsec transform-set myset esp-des esp-md5-hmac  
crypto dynamic-map cisco 1 set transform-set myset 
crypto map dyn-map 20 ipsec-isakmp dynamic cisco 
crypto map dyn-map interface outside 
isakmp enable outside 
isakmp policy 20 authentication pre-share 
isakmp policy 20 encryption des 
isakmp policy 20 hash md5 
isakmp policy 20 group 2 
isakmp policy 20 lifetime 3600 
isakmp policy 65535 authentication pre-share 
isakmp policy 65535 encryption 3des 
isakmp policy 65535 hash sha 
isakmp policy 65535 group 2 
isakmp policy 65535 lifetime 86400 
telnet timeout 5 
ssh timeout 5 
ssh version 1 
console timeout 0 
tunnel-group DefaultL2LGroup type ipsec-l2l
tunnel-group DefaultL2LGroup general-attributes
   authentication-server-group none
tunnel-group DefaultL2LGroup ipsec-attributes
   pre-shared-key * 
tunnel-group unityclient type ipsec-ra 
tunnel-group unityclient general-attributes 
 address-pool clientpool 
 authentication-server-group none 
 default-group-policy unityclient 
tunnel-group unityclient ipsec-attributes 
 pre-shared-key * 
! 
class-map inspection_default 
 match default-inspection-traffic 
! 
! 
policy-map global_policy 
 class inspection_default 
  inspect dns maximum-length 512  
  inspect ftp  
  inspect h323 h225  
  inspect h323 ras  
  inspect http  
  inspect netbios  
  inspect rsh  
  inspect rtsp  
  inspect skinny  
  inspect esmtp  
  inspect sqlnet  
  inspect sunrpc  
  inspect tftp  
  inspect sip  
  inspect xdmcp  
!  
service-policy global_policy global 
Cryptochecksum:4e20a2153437d60c7f01054808d41b42 
: end

Tigre
PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto shutdown interface ethernet3 auto shutdown interface ethernet4 auto shutdown interface ethernet5 auto shutdown nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 intf2 security4 nameif ethernet3 intf3 security6 nameif ethernet4 intf4 security8 nameif ethernet5 intf5 security10 enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname tiger domain-name cisco.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names access-list 101 permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0 pager lines 24 mtu outside 1500 mtu inside 1500 mtu intf2 1500 mtu intf3 1500 mtu intf4 1500 mtu intf5 1500 !--- This command configures the outside interface !--- as a DHCP client and it is assumed that the IP address !--- 172.18.124.167 is assigned by the DHCP server. ip address outside dhcp ip address inside 10.1.1.1 255.255.255.0 no ip address intf2 no ip address intf3 no ip address intf4 no ip address intf5 ip audit info action alarm ip audit attack action alarm no failover failover timeout 0:00:00 failover poll 15 no failover ip address outside no failover ip address inside no failover ip address intf2 no failover ip address intf3 no failover ip address intf4 no failover ip address intf5 pdm history enable arp timeout 14400 nat (inside) 0 access-list 101 route outside 0.0.0.0 0.0.0.0 172.18.124.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server LOCAL protocol local no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set myset esp-des esp-md5-hmac crypto map newmap 10 ipsec-isakmp crypto map newmap 10 match address 101 crypto map newmap 10 set peer 172.18.124.166 crypto map newmap 10 set transform-set myset crypto map newmap interface outside isakmp enable outside isakmp key ******** address 172.18.124.166 netmask 255.255.255.255 isakmp policy 10 authentication pre-share isakmp policy 10 encryption des isakmp policy 10 hash md5 isakmp policy 10 group 2 isakmp policy 10 lifetime 3600 telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 80 Cryptochecksum:906331b1b1ca162ea53e951588efb070 : end

Tigre

PIX Version 6.3(4) 
interface ethernet0 auto 
interface ethernet1 auto 
interface ethernet2 auto shutdown 
interface ethernet3 auto shutdown 
interface ethernet4 auto shutdown 
interface ethernet5 auto shutdown 
nameif ethernet0 outside security0 
nameif ethernet1 inside security100 
nameif ethernet2 intf2 security4 
nameif ethernet3 intf3 security6 
nameif ethernet4 intf4 security8 
nameif ethernet5 intf5 security10 
enable password 8Ry2YjIyt7RRXU24 encrypted 
passwd 2KFQnbNIdI.2KYOU encrypted 
hostname tiger 
domain-name cisco.com 
fixup protocol dns maximum-length 512 
fixup protocol ftp 21 
fixup protocol h323 h225 1720 
fixup protocol h323 ras 1718-1719 
fixup protocol http 80 
fixup protocol rsh 514 
fixup protocol rtsp 554 
fixup protocol sip 5060 
fixup protocol sip udp 5060 
fixup protocol skinny 2000 
fixup protocol smtp 25 
fixup protocol sqlnet 1521 
fixup protocol tftp 69 
names 
access-list 101 permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0  
pager lines 24 
mtu outside 1500 
mtu inside 1500 
mtu intf2 1500 
mtu intf3 1500 
mtu intf4 1500 
mtu intf5 1500

!--- This command configures the outside interface !--- as a DHCP client and it is assumed that the IP address !--- 172.18.124.167 is assigned by the DHCP server.

ip address outside dhcp 
ip address inside 10.1.1.1 255.255.255.0 
no ip address intf2 
no ip address intf3 
no ip address intf4 
no ip address intf5 
ip audit info action alarm 
ip audit attack action alarm 
no failover 
failover timeout 0:00:00 
failover poll 15 
no failover ip address outside 
no failover ip address inside 
no failover ip address intf2 
no failover ip address intf3 
no failover ip address intf4 
no failover ip address intf5 
pdm history enable 
arp timeout 14400 
nat (inside) 0 access-list 101 
route outside 0.0.0.0 0.0.0.0 172.18.124.1 1 
timeout xlate 3:00:00 
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 
timeout uauth 0:05:00 absolute 
aaa-server TACACS+ protocol tacacs+  
aaa-server TACACS+ max-failed-attempts 3  
aaa-server TACACS+ deadtime 10  
aaa-server RADIUS protocol radius  
aaa-server RADIUS max-failed-attempts 3  
aaa-server RADIUS deadtime 10  
aaa-server LOCAL protocol local  
no snmp-server location 
no snmp-server contact 
snmp-server community public 
no snmp-server enable traps 
floodguard enable 
sysopt connection permit-ipsec 
crypto ipsec transform-set myset esp-des esp-md5-hmac  
crypto map newmap 10 ipsec-isakmp 
crypto map newmap 10 match address 101 
crypto map newmap 10 set peer 172.18.124.166 
crypto map newmap 10 set transform-set myset 
crypto map newmap interface outside 
isakmp enable outside 
isakmp key ******** address 172.18.124.166 netmask 255.255.255.255  
isakmp policy 10 authentication pre-share 
isakmp policy 10 encryption des 
isakmp policy 10 hash md5 
isakmp policy 10 group 2 
isakmp policy 10 lifetime 3600 
telnet timeout 5 
ssh timeout 5 
console timeout 0 
terminal width 80 
Cryptochecksum:906331b1b1ca162ea53e951588efb070 
: end

Verificación

Use esta sección para confirmar que su configuración funciona correctamente.

La herramienta Output Interpreter Tool (clientes registrados solamente) (OIT) soporta ciertos comandos show. Utilice la OIT para ver un análisis del resultado del comando show.

Nota: Debe realizar los comandos clear en el modo config.

clear crypto ipsec sa: restablece las asociaciones IPsec después de intentos fallidos de negociar un túnel VPN.
clear crypto isakmp sa: restablece las asociaciones de seguridad de protocolo de administración de claves (ISAKMP) y asociación de seguridad de Internet después de intentos fallidos de negociar un túnel VPN.
show crypto engine ipsec: muestra las sesiones cifradas.

Troubleshoot

Claves previamente compartidas idénticas

Si el túnel IPsec de LAN a LAN (L2L) no está establecido, verifique si la clave previamente compartida para DefaultRAGroup y la clave previamente compartida para DefaultL2LGroup son iguales. Si este es el caso, entonces el PIX/ASA termina el túnel en el DefaultRAGroup primero y es probable que el túnel L2L luego falle. Asegúrese de que las claves previamente compartidas para los dos grupos de túnel predeterminados sean diferentes.

Comandos para resolución de problemas

La herramienta Output Interpreter Tool (clientes registrados solamente) (OIT) soporta ciertos comandos show. Utilice la OIT para ver un análisis del resultado del comando show.

Nota: Consulte Información Importante sobre Comandos Debug antes de utilizar los comandos debug.

debug crypto ipsec: se utiliza para ver si un cliente negocia la parte IPsec de la conexión VPN.
debug crypto isakmp [level] —Se utiliza para ver si los peers negocian la parte ISAKMP de la VPN.

Ejemplos de Salida de Debug Correcto

Estos son ejemplos de algunos buenos resultados del comando debug:

PIX central (7.0.0)
NAT dinámica PIX remota (6.3.4)
Cliente VPN 4.0.5 en PIX 7.0 central

PIX central (7.0.0)

lion(config)# 2nd try, on central PIX from remote PIXApr 05 16:48:31 [IKEv1 DEBUG]:
 IP = 172.18.124.167, processing SA payload 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, Oakley proposal is acceptable 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, processing IKE SA 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, IKE SA Proposal # 1, Transform
 # 1 acceptable  Matches global IKE entry # 3 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing ISA_SA for isakmp 
Apr 05 16:48:31 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing Fragmentation VID
 + extended capabilities payload 
Apr 05 16:48:31 [IKEv1]: IP = 172.18.124.167, IKE DECODE SENDING Message (msgid=0)
 with payloads : HDR + SA (1) + VENDOR (13) + NONE (0) total length : 104 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message (msgid=0)
 with payloads : HDR + KE (4) + NONCE (10) + VENDOR (13) + VENDOR (13) +VENDOR (13)
 + VENDOR (13) + NONE (0) total length : 256 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing ke payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing ISA_KE 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing nonce payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Received xauth V6 VID 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Received DPD VID 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Received Cisco Unity client VID 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, processing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Processing IOS/PIX Vendor ID 
payload (version: 1.0.0, capabilities: 00000025) 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing ke payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing nonce payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing Cisco Unity VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing xauth V6 VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Send IOS VID 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Constructing ASA spoofing IOS
 Vendor ID payload (version: 1.0.0, capabilities: 20000001) 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, constructing VID payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Send Altiga/Cisco VPN3000/Cisco
 ASA GW VID 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, Connection landed on tunnel_group
 DefaultL2LGroup
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Generating keys for Responder... 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, IKE DECODE SENDING Message
 (msgid=0) with payloads : HDR + KE (4) + NONCE (10) + VENDOR (13) + VENDOR (13)
 + VENDOR (13) + VENDOR (13) + NONE (0) total length : 256 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message (msg 
id=0) with payloads : HDR + ID (5) + HASH (8) + NONE (0) total length : 71 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Processing ID 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing hash 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 computing hash 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, Connection landed on tunnel_group
 DefaultL2LGroup 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing ID 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 construct hash payload 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 computing hash 
Apr 05 16:48:32 [IKEv1 DEBUG]: IP = 172.18.124.167, Constructing IOS keep
 alive payload: proposal=32767/32767 sec. 
Apr 05 16:48:32 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing dpd vid payload 
Apr 05 16:48:32 [IKEv1]: IP = 172.18.124.167, IKE DECODE SENDING Message
 (msgid=0) with payloads : HDR + ID (5) + HASH (8) + IOS KEEPALIVE (14) 
+ VENDOR (13) + NONE (0) total length : 102 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message
 (msgid=ba80c56e) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0)
 total length : 76 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing hash 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Processing Notify payload 
Apr 05 16:48:33 [IKEv1]: Received unexpected event EV_ACTIVATE_NEW_SA in
 state MM_TM_INIT_MODECFG_H 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Resume Quick Mode processing, Cert/Trans Exch/RM DSID completed 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167, PHASE 1COMPLETED 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, Keep-alive type for this connection: DPD 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Starting phase 1 rekey timer: 3420000 (ms) 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message
 (msgid=20c2120e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID
 (5) + ID (5) + NONE (0) total length : 164 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing hash 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing SA payload 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing nonce payload 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Processing ID 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Received remote IP Proxy Subnet data in ID Payload:   Address 10.1.1.0,
 Mask 255.255.255.0, Protocol 0, Port 0 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Processing ID 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Received local IP Proxy Subnet data in ID Payload:   Address 10.2.2.0,
 Mask 255.255.255.0, Protocol 0, Port 0 
Apr 05 16:48:33 [IKEv1]: QM IsRekeyed old sa not found by addr 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 IKE Remote Peer configured for SA: cisco 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing IPSEC SA 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 IPSec SA Proposal # 1, Transform # 1 acceptable  Matches global IPSec SA entry # 1 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 IKE: requesting SPI! 
Apr 05 16:48:33 [IKEv1 DEBUG]: IKE got SPI from key engine: SPI = 0xd5243861 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 oakley constucting quick mode 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing blank hash 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing ISA_SA for ipsec 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing ipsec nonce payload 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing proxy ID 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Transmitting Proxy Id: 
  Remote subnet: 10.1.1.0  Mask 255.255.255.0 Protocol 0  Port 0 
  Local subnet:  10.2.2.0  mask 255.255.255.0 Protocol 0  Port 0 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 constructing qm hash 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, IKE DECODE SENDING Message
 (msgid=20c2120e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) +
 ID (5) + ID (5) + NONE (0) total length : 164 
Apr 05 16:48:33 [IKEv1]: IP = 172.18.124.167, IKE DECODE RECEIVED Message
 (msgid=20c2120e) with payloads : HDR + HASH (8) + NONE (0) total length : 48 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 processing hash 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 loading all IPSEC SAs 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Generating Quick Mode Key! 
Apr 05 16:48:33 [IKEv1 DEBUG]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Generating Quick Mode Key! 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 Security negotiation complete for User (DefaultL2LGroup)  Responder,
 Inbound SPI = 0xd5243861, Outbound SPI = 0x7bb11ead 
Apr 05 16:48:33 [IKEv1 DEBUG]: IKE got a KEY_ADD msg for SA: SPI = 0x7bb11ead 
Apr 05 16:48:33 [IKEv1 DEBUG]: pitcher: rcv KEY_UPDATE, spi 0xd5243861 
Apr 05 16:48:33 [IKEv1]: Group = DefaultL2LGroup, IP = 172.18.124.167,
 PHASE 2 COMPLETED (msgid=20c2120e)

NAT dinámica PIX remota (6.3.4)

tiger(config)# 
ISAKMP (0): beginning Main Mode exchange 

crypto_isakmp_process_block:src:172.18.124.166, dest:172.18.124.167 spt:500
 dpt:500 OAK_MM exchange 
ISAKMP (0): processing SA payload. message ID = 0 

ISAKMP (0): Checking ISAKMP transform 1 against priority 10 policy 
ISAKMP:      encryption DES-CBC 
ISAKMP:      hash MD5 
ISAKMP:      default group 2 
ISAKMP:      auth pre-share 
ISAKMP:      life type in seconds 
ISAKMP:      life duration (basic) of 3600 
ISAKMP (0): atts are acceptable. Next payload is 0 
ISAKMP (0): processing vendor id payload 

ISAKMP (0): SA is doing pre-shared key authentication using id type
 ID_FQDN return status is IKMP_NO_ERROR 
crypto_isakmp_process_block:src:172.18.124.166, dest:172.18.124.167
 spt:500 dpt:500 OAK_MM exchange 
ISAKMP (0): processing KE payload. message ID = 0 
ISAKMP (0): processing NONCE payload. message ID = 0 
ISAKMP (0): processing vendor id payload 
ISAKMP (0): processing vendor id payload 
ISAKMP (0): received xauth v6 vendor id 
ISAKMP (0): processing vendor id payload 
ISAKMP (0): speaking to another IOS box! 
ISAKMP (0): processing vendor id payload 
ISAKMP (0): speaking to a VPN3000 concentrator 
ISAKMP (0): ID payload 
        next-payload : 8 
        type         : 2 
        protocol     : 17 
        port         : 500 
        length       : 19 
ISAKMP (0): Total payload length: 23 
return status is IKMP_NO_ERROR 
crypto_isakmp_process_block:src:172.18.124.166, dest:172.18.124.167 spt:500 dpt:500 
OAK_MM exchange 
ISAKMP (0): processing ID payload. message ID = 0 
ISAKMP (0): processing HASH payload. message ID = 0 
ISAKMP (0): processing vendor id payload 

ISAKMP (0): remote peer supports dead peer detection 

ISAKMP (0): SA has been authenticated 

ISAKMP (0): beginning Quick Mode exchange, M-ID of 549589518:20c2120eIPSEC(key_engine):
 got a queue event... 
IPSEC(spi_response): getting spi 0x7bb11ead(2075205293) for SA 
        from  172.18.124.166 to  172.18.124.167 for prot 3 

return status is IKMP_NO_ERROR 
ISAKMP (0): sending INITIAL_CONTACT notify 
ISAKMP (0): sending NOTIFY message 24578 protocol 1 
VPN Peer: ISAKMP: Added new peer: ip:172.18.124.166/500 Total VPN Peers:1 
VPN Peer: ISAKMP: Peer ip:172.18.124.166/500 Ref cnt incremented to:1 Total VPN Peers:1 
crypto_isakmp_process_block:src:172.18.124.166, dest:172.18.124.167 spt:500 dpt:500 
OAK_QM exchange 
oakley_process_quick_mode: 
OAK_QM_IDLE 
ISAKMP (0): processing SA payload. message ID = 549589518 

ISAKMP : Checking IPSec proposal 1 

ISAKMP: transform 1, ESP_DES 
ISAKMP:   attributes in transform: 
ISAKMP:      SA life type in seconds 
ISAKMP:      SA life duration (basic) of 28800 
ISAKMP:      SA life type in kilobytes 
ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0 
ISAKMP:      encaps is 1 
ISAKMP:      authenticator is HMAC-MD5 
ISAKMP (0): atts are acceptable.IPSEC(validate_proposal_request): proposal part #1, 
  (key eng. msg.) dest= 172.18.124.166, src= 172.18.124.167, 
    dest_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4), 
    src_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 0s and 0kb, 
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4 

ISAKMP (0): processing NONCE payload. message ID = 549589518 

ISAKMP (0): processing ID payload. message ID = 549589518 
ISAKMP (0): processing ID payload. message ID = 549589518 
ISAKMP (0): Creating IPSec SAs 
        inbound SA from  172.18.124.166 to  172.18.124.167 (proxy 10.2.2.0 to 10.1.1.0) 
        has spi 2075205293 and conn_id 1 and flags 4 
        lifetime of 28800 seconds 
        lifetime of 4608000 kilobytes 
        outbound SA from  172.18.124.167 to  172.18.124.166 (proxy 10.1.1.0 to 10.2.2.0) 
        has spi 3575920737 and conn_id 2 and flags 4 
        lifetime of 28800 seconds 
        lifetime of 4608000 kilobytesIPSEC(key_engine): got a queue event... 
IPSEC(initialize_sas): , 
  (key eng. msg.) dest= 172.18.124.167, src= 172.18.124.166, 
    dest_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    src_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4), 
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 28800s and 4608000kb, 
    spi= 0x7bb11ead(2075205293), conn_id= 1, keysize= 0, flags= 0x4IPSEC(initialize_sas): , 
  (key eng. msg.) src= 172.18.124.167, dest= 172.18.124.166, 
    src_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    dest_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4), 
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 28800s and 4608000kb, 
    spi= 0xd5243861(3575920737), conn_id= 2, keysize= 0, flags= 0x4 

VPN Peer: IPSEC: Peer ip:172.18.124.166/500 Ref cnt incremented to:2 Total VPN Peers:1 
VPN Peer: IPSEC: Peer ip:172.18.124.166/500 Ref cnt incremented to:3 Total VPN Peers:1
 return status is IKMP_NO_ERROR

Cliente VPN 4.0.5 en PIX 7.0 central

lion(config)# Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing SA payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing ke payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing ISA_KE 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing nonce payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Processing ID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received xauth V6 VID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received DPD VID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received NAT-Traversal ver02 VID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received Fragmentation VID 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, IKE Peer included IKE fragmentation
 capability flags:  Main Mode:        True  Aggressive Mode:  False 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: IP = 64.102.51.191, Received Cisco Unity client VID 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, Connection landed on tunnel_group unityclient 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, processing IKE SA 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, IKE SA Proposal # 1,
 Transform # 14 acceptable  Matches global IKE entry # 3 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, constructing ISA_SA
 for isakmp 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, 
 constructing ke payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, 
 constructing nonce payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Generating keys for Responder... 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing ID 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 construct hash payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 computing hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing Cisco Unity VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing xauth V6 VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing dpd vid payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing Fragmentation VID + extended capabilities payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Send Altiga/Cisco VPN3000/Cisco ASA GW VID 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + 
 HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR
 (13) + NONE (0) total length : 378 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=0) with payloads : HDR + HASH (8) + NOTIFY (11) + VENDOR (13) +
 VENDOR (13) + NONE (0) total length : 116 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, processing hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, computing hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Processing Notify payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 00000408) 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing VID payload 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Received Cisco Unity client VID 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=a0bb428) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0)
 total length: 196 
Apr 05 16:49:56 [IKEv1 DEBUG]: process_attr(): Enter! 
Apr 05 16:49:56 [IKEv1 DEBUG]: Processing cfg Request attributes 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for IPV4 address! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for IPV4 net mask! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for DNS server address! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for WINS server address! 
Apr 05 16:49:56 [IKEv1]: Group = unityclient, IP = 64.102.51.191, Received
 unsupported transaction mode attribute: 5 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Banner! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Save PW setting! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Default Domain Name! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Split Tunnel List! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Split DNS! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for PFS setting! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for backup ip-sec peer list! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for Application Version! 
Apr 05 16:49:56 [IKEv1]: Group = unityclient, IP = 64.102.51.191, Client Type: WinNT
  Client Application Version: 4.0.5 (Rel) 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for FWTYPE! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for DHCP hostname
 for DDNS is: tthotus-xp! 
Apr 05 16:49:56 [IKEv1 DEBUG]: MODE_CFG: Received request for UDP Port! 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=a0bb428) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0)
 total length : 157 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Resume Quick Mode processing, Cert/Trans Exch/RM DSID completed 
Apr 05 16:49:56 [IKEv1]: Group = unityclient, IP = 64.102.51.191, PHASE 1 COMPLETED 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, Keep-alive type for this connection: DPD 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Starting phase 1 rekey timer: 3420000 (ms) 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 sending notify message 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:49:56 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:49:56 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=9be7674c) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE
 (0) total length : 84 
Apr 05 16:49:57 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=833e7945) with payloads : HDR + HASH (8) + SA (1) + NONCE (10)
 + ID (5) + ID (5) + NONE (0) total length : 1022 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, processing hash 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing SA payload 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing nonce payload 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, Processing ID 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 Received remote Proxy Host data in ID Payload:  Address 10.3.3.1, Protocol 0, Port 0 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, Processing ID 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 Received local IP Proxy Subnet data in ID Payload:   Address 0.0.0.0,
 Mask 0.0.0.0, Protocol 0, Port 0 
Apr 05 16:49:57 [IKEv1]: QM IsRekeyed old sa not found by addr 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 IKE Remote Peer configured for SA: cisco 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 processing IPSEC SA 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 IPSecSA Proposal # 14, Transform # 1 acceptable  Matches global IPSec SA entry # 1 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191, IKE: requesting SPI! 
Apr 05 16:49:57 [IKEv1 DEBUG]: IKE got SPI from key engine: SPI = 0x05953824 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 oakley constucting quick mode 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing ISA_SA for ipsec 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191, 
 Overriding Initiator's IPSec rekeying duration from 2147483 to 28800 seconds 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing ipsec nonce payload 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing proxy ID 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Transmitting Proxy Id: 
  Remote host: 10.3.3.1  Protocol 0  Port 0 
  Local subnet:  0.0.0.0  mask 0.0.0.0 Protocol 0  Port 0 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Sending RESPONDER LIFETIME notification to Initiator 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:49:57 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=833e7945) with payloads : HDR + HASH (8) + SA (1) + NONCE (10)
 + ID (5) + ID (5) + NOTIFY (11) + NONE (0) total length : 176 
Apr 05 16:49:57 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=833e7945) with payloads : HDR + HASH (8) + NONE (0) total length : 48 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing hash 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 loading all IPSEC SAs 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Generating Quick Mode Key! 
Apr 05 16:49:57 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Generating Quick Mode Key! 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 Security negotiation complete for User (unityclient)  Responder,
 Inbound SPI = 0x05953824, Outbound SPI = 0xd08c6486 
Apr 05 16:49:57 [IKEv1 DEBUG]: IKE got a KEY_ADD msg for SA: SPI = 0xd08c6486 
Apr 05 16:49:57 [IKEv1 DEBUG]: pitcher: rcv KEY_UPDATE, spi 0x5953824 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191,
 Adding static route for client address: 10.3.3.1 
Apr 05 16:49:57 [IKEv1]: Group = unityclient, IP = 64.102.51.191, PHASE 2 COMP 
LETED (msgid=833e7945) 
Apr 05 16:50:07 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=403ee701) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE
 (0) total length : 80 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 processing hash 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Processing Notify payload 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Received keep-alive of type DPD R-U-THERE (seq number 0x4b55b6e4) 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Sending keep-alive of type DPD R-U-THERE-ACK (seq number 0x4b55b6e4) 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:50:07 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:50:07 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=78998a29) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE
 (0) total length : 80 
Apr 05 16:50:17 [IKEv1]: IP = 64.102.51.191, IKE DECODE RECEIVED Message
 (msgid=dba719e9) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0)
 total length : 80 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191, processing hash 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Processing Notify payload 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Received keep-alive of type DPD R-U-THERE (seq number 0x4b55b6e5) 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 Sending keep-alive of type DPD R-U-THERE-ACK (seq number 0x4b55b6e5) 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing blank hash 
Apr 05 16:50:17 [IKEv1 DEBUG]: Group = unityclient, IP = 64.102.51.191,
 constructing qm hash 
Apr 05 16:50:17 [IKEv1]: IP = 64.102.51.191, IKE DECODE SENDING Message
 (msgid=40456779) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE
 (0) total length : 80

Información Relacionada

Historial de revisiones

Revisión	Fecha de publicación	Comentarios
1.0	03-May-2007	Versión inicial

Ejemplo de Configuración de PIX/ASA 7.x PIX-to-PIX Dinámico-Static IPsec con NAT y Cliente VPN

Opciones de descarga

Lenguaje no discriminatorio

Acerca de esta traducción

Contenido

Historial de revisiones

¿Resultó útil este documento?

Contacte a Cisco

Este documento se aplica a estos productos