Introducción
Este documento describe cómo eliminar las bases de datos de informes o seguimiento asociadas almacenadas en Cisco Email Security Appliance (ESA) o Cisco Security Management Appliance (SMA).
¿Cómo borro la base de datos de seguimiento o de informes?
Base de datos de seguimiento
La base de datos de seguimiento se compone de registros de seguimiento para el dispositivo. Seguimiento de registros registra las acciones asociadas con los procesos del servicio de seguimiento. Los registros de rastreo son un subconjunto de los registros de correo.
Precaución: Este comando eliminará todos los datos de seguimiento y no se podrá revertir.
Desde la CLI, utilice diagnostic > track > delete b para borrar la base de datos de seguimiento. No es necesario ningún compromiso.
mylocal.esa> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- DISK_USAGE - Check Disk Usage.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
[]> tracking
Choose the operation you want to perform:
- DELETEDB - Reinitialize the tracking database.
- DEBUG - Gather debug information.
[]> deletedb
This command will delete all tracking data and cannot be aborted.
In some instances it may take several minutes to complete. Please
do not attempt a system restart until the command has returned.
Are you sure you want to continue? [N]> y
Deleting all tracking data.
Shutting down the Splunk daemon (this may take a few minutes)...
Splunk daemon shut down
Removing Splunk database...
Splunk database removed
Removing 'missing data' database...
Removing unparsed log files...
Unparsed log files removed
Rebuilding log file directory...
rebuilt log file directory
Restarting the Splunk daemon (this may take a few minutes)...
Splunk daemon started
Base de datos de informes
La base de datos de informes es una base de datos binaria propietaria que contiene métricas históricas sobre el flujo de correo para el dispositivo.
Precaución: Este comando eliminará todos los datos de informes y no podrá revertirse.
En la CLI, utilice diagnostic > reporting > delete para borrar la base de datos de informes. No es necesario ningún compromiso.
myesa.local> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- DISK_USAGE - Check Disk Usage.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
[]> reporting
The reporting system is currently enabled.
Choose the operation you want to perform:
- DELETEDB - Reinitialize the reporting database.
- DISABLE - Disable the reporting system.
[]> deletedb
This command will delete all reporting data and cannot be aborted. In some instances
it may take several minutes to complete. Please do not attempt a system restart
until the command has returned. Are you sure you
want to continue? [N]> y
Shutting down reporting system......
Removing all reporting data. This may take several minutes.
The reporting system database has been reinitialized.
The reporting system is currently enabled.
Información Relacionada
Comentarios