PIX/ASA 7.x et versions ultérieures : exemple de configuration d'IPsec dynamique entre un routeur IOS à adressage statique et un PIX à adressage dynamique avec NAT

Options de téléchargement

  • PDF     (328.1 KB)
    Consulter à l'aide d'Adobe Reader sur un grand nombre d'appareils
  • ePub     (122.5 KB)
    Consulter à l’aide de différentes applications sur iPhone, iPad, Android ou Windows Phone
  • Mobi (Kindle)     (134.3 KB)
    Consulter sur un appareil Kindle ou à l’aide d’une application Kindle sur plusieurs appareils
Mis à jour:10 octobre 2008
ID du document:82077

Langage exempt de préjugés

Dans le cadre de la documentation associée à ce produit, nous nous efforçons d’utiliser un langage exempt de préjugés. Dans cet ensemble de documents, le langage exempt de discrimination renvoie à une langue qui exclut la discrimination en fonction de l’âge, des handicaps, du genre, de l’appartenance raciale de l’identité ethnique, de l’orientation sexuelle, de la situation socio-économique et de l’intersectionnalité. Des exceptions peuvent s’appliquer dans les documents si le langage est codé en dur dans les interfaces utilisateurs du produit logiciel, si le langage utilisé est basé sur la documentation RFP ou si le langage utilisé provient d’un produit tiers référencé. Découvrez comment Cisco utilise le langage inclusif.

À propos de cette traduction

Cisco a traduit ce document en traduction automatisée vérifiée par une personne dans le cadre d’un service mondial permettant à nos utilisateurs d’obtenir le contenu d’assistance dans leur propre langue. Il convient cependant de noter que même la meilleure traduction automatisée ne sera pas aussi précise que celle fournie par un traducteur professionnel.

Introduction

Ce document fournit un exemple de configuration qui vous montre comment activer le routeur pour accepter des connexions IPsec dynamiques à partir d'un PIX. Le routeur distant effectue la traduction d'adresses de réseau (NAT) si le réseau privé 10.2.1.x accède à Internet. Le trafic de 10.2.1.x vers le réseau privé 10.1.1.x derrière l'appliance de sécurité PIX est exclu du processus NAT. Le tunnel IPsec établit seulement si le trafic (10.1.1.x) initie la connexion de l'appareil de sécurité PIX avec le routeur ayant un réseau distant (10.2.1.x). Le PIX peut initier des connexions au routeur, mais le routeur ne peut pas initier de connexions au PIX.

Cette configuration utilise un routeur Cisco IOS® afin de créer des tunnels dynamiques IPsec LAN à LAN (L2L) avec un dispositif de sécurité qui reçoit des adresses IP dynamiques sur son interface publique (interface externe). Le protocole DHCP (Dynamic Host Configuration Protocol) fournit un mécanisme permettant d'allouer des adresses IP de manière dynamique à partir du fournisseur de services. Cela permet de réutiliser les adresses IP lorsque les hôtes n’en ont plus besoin.

Référez-vous à Configuration de PIX-to-Router Dynamic-to-Static IPSec avec NAT pour plus d'informations sur un scénario où PIX 6.x accepte des connexions IPsec dynamiques à partir du routeur.

Référez-vous à Exemple de configuration d'IPsec dynamique à statique de routeur à PIX avec NAT pour plus d'informations sur un scénario où le routeur accepte des connexions IPsec dynamiques à partir d'un pare-feu PIX qui exécute 6.x.

Référez-vous à Exemple de configuration d'IPsec entre un routeur IOS statique et un PIX/ASA 7.x dynamique avec NAT afin d'activer l'appliance de sécurité PIX/ASA pour accepter des connexions IPsec dynamiques à partir du routeur Cisco IOS.

Référez-vous à Exemple de configuration de PIX/ASA 7.x PIX-to-PIX Dynamic-to-Static IPsec avec NAT et client VPN pour plus d'informations sur le scénario où le dispositif de sécurité PIX/ASA 7.x accepte des connexions IPsec dynamiques à partir d'un autre PIX 6.x.

Conditions préalables

Exigences

Assurez-vous que le PIX et le routeur ont tous deux une connectivité Internet pour l'établissement du tunnel IPsec avant de tenter cette configuration.

Ce document suppose que vous avez déjà attribué les adresses IP sur les interfaces publiques et privées et que vous pouvez envoyer une requête ping à l'adresse IP du périphérique VPN distant.

Composants utilisés

Les informations contenues dans ce document sont basées sur les versions de matériel et de logiciel suivantes :

  • Cisco 3600 qui exécute le logiciel Cisco IOS version 12.4

  • Logiciel du dispositif de sécurité de la gamme PIX 515E version 7.x et ultérieure

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Produits connexes

La gamme Cisco ASA 5500 version 7.x exécute une version logicielle similaire à PIX version 7.x. Les configurations présentées dans ce document s'appliquent aux deux gammes de produits.

Conventions

Pour plus d’informations sur les conventions utilisées dans ce document, reportez-vous aux Conventions relatives aux conseils techniques Cisco.

Informations générales

Sur le PIX, les commandes access-list et nat 0 fonctionnent ensemble. Lorsqu’un utilisateur du réseau 10.1.1.0 se connecte au réseau 10.2.1.0, la liste d’accès est utilisée pour permettre le chiffrement du trafic réseau 10.1.1.0 sans NAT. Sur le routeur, les commandes access-list sont utilisées pour permettre au trafic réseau 10.2.1.0 d'être chiffré sans NAT. Cependant, lorsque les mêmes utilisateurs vont n'importe où ailleurs (comme sur Internet), ils sont traduits vers l'adresse IP de l'interface externe via la traduction d'adresses de port (PAT).

Il s'agit des commandes de configuration requises sur l'appareil de sécurité PIX afin que le trafic ne passe pas par PAT sur le tunnel, et le trafic vers Internet pour passer par PAT. 

access-list nonat permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0
nat (inside) 0 access-list nonat
nat (inside) 1 10.1.1.0 255.255.255.0 0 0

Configurer

Cette section vous fournit des informations pour configurer les fonctionnalités décrites dans ce document.

Remarque : utilisez l'outil de recherche de commandes (clients enregistrés uniquement) pour obtenir plus d'informations sur les commandes utilisées dans cette section.

Diagramme du réseau

Ce document utilise la configuration réseau suivante :

ipsec-pix-iosroutr-nat-config-1.gif

Configurations

Ce document utilise les configurations suivantes :

PIX 7.x 
pixfirewall#show running-config 
 PIX Version 7.2(2)
!
hostname pixfirewall
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!

!--- The interface dynamically learns its IP address !--- from the service provider.

interface Ethernet0
 nameif outside
 security-level 0
 ip address dhcp
!
interface Ethernet1
 nameif inside
 security-level 100
 ip address 10.1.1.2 255.255.255.0
!
!

 !-- Output is suppressed.

!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive


 !--- This is the access list (IPsec-traffic) used for the VPN interesting traffic !--- to be encrypted.



access-list IPSec-traffic extended permit ip 10.1.1.0 255.255.255.0 10.2.1.0 255.255.255.0


!--- This access list (nonat) is used for a nat zero command that prevents !--- traffic which matches the access list from undergoing NAT.


access-list NO-NAT extended permit ip 10.1.1.0 255.255.255.0 10.2.1.0 255.255.255.0


pager lines 24
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400


 !--- NAT 0 prevents NAT for networks specified in the ACL - nonat. !--- The nat 1 command specifies PAT using the !--- outside interface for all other traffic.


global (outside) 1 interface
nat (inside) 0 access-list NO-NAT
nat (inside) 1 0.0.0.0 0.0.0.0

route outside 0.0.0.0 0.0.0.0 172.16.1.2 1

timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart


!--- PHASE 2 CONFIGURATION ---! !--- The encryption types for Phase 2 are defined here. !--- A triple single DES encryption with !--- the md5 hash algorithm is used.


crypto ipsec transform-set DYN-TS esp-des esp-md5-hmac


!--- Define which traffic should be sent to the IPsec peer. 


crypto map IPSEC 10 match address IPSec-traffic


!--- Sets the IPsec peer.


crypto map IPSEC 10 set peer 192.168.1.2


!--- Sets the IPsec transform set "DYN-TS" !--- to be used with the crypto map entry "IPSEC".


crypto map IPSEC 10 set transform-set DYN-TS


!--- Specifies the interface to be used with !--- the settings defined in this configuration.


crypto map IPSEC interface outside


!--- Enables IPsec on the outside interface.

crypto isakmp enable outside


!--- PHASE 1 CONFIGURATION ---! !--- This configuration uses isakmp policy 10. !--- Policy 65535 is included in the configuration by default. !--- The configuration commands here define the Phase !--- 1 policy parameters that are used.

crypto isakmp policy 10
 authentication pre-share
 encryption des
 hash md5
 group 1
 lifetime 86400


crypto isakmp policy 65535
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400

!--- In order to create and manage the database of connection-specific records !--- for IPsec-L2L—IPsec tunnels, use the tunnel-group !--- command in global configuration mode. !--- For L2L connections the name of the tunnel group MUST be the IP !--- address of the IPsec peer. 

tunnel-group 192.168.1.2 type ipsec-l2l


!--- Enter the pre-shared-key in IPsec-attribute parameters !--- in order to configure the authentication method. 

tunnel-group 192.168.1.2 ipsec-attributes
 pre-shared-key *

telnet timeout 5
ssh timeout 5
console timeout 0
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect netbios
  inspect rsh
  inspect rtsp
  inspect skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect tftp
  inspect sip
  inspect xdmcp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:d609c9eaf51c154f147b3b4ba3c834e0
: end
pixfirewall#

Routeur 
Router#show running-config
Current configuration : 1354 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
!
!
ip cef
!


!--- Configuration for IKE policies. !--- Enables the IKE policy configuration (config-isakmp) !--- command mode, where you can specify the parameters that !--- are used during an IKE negotiation.


crypto isakmp policy 10
 hash md5
 authentication pre-share


!--- Specifies the preshared key "cisco123" which should !--- be identical at both peers. This is a global !--- configuration mode command. It accepts any peer which matches !--- the pre-shared key.

crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0
!

!--- Configuration for IPsec policies. !--- Enables the crypto transform configuration mode, !--- where you can specify the transform sets that are used !--- during an IPsec negotiation. 


crypto ipsec transform-set DYN-TS esp-des esp-md5-hmac


!--- IPsec policy, Phase 2.


crypto dynamic-map DYN 10



!--- Configures IPsec to use the transform-set !--- "DYN-TS" defined earlier in this configuration.


 set transform-set DYN-TS



crypto map IPSEC 10 ipsec-isakmp dynamic DYN
!
interface Ethernet0/0
 ip address 192.168.1.2 255.255.255.0
 ip nat outside
 ip virtual-reassembly
 half-duplex

!--- Configures the interface to use the !--- crypto map "IPSEC" for IPsec.

 crypto map IPSEC
!
interface FastEthernet1/0
 ip address 10.2.1.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 duplex auto
 speed auto
!
interface Serial2/0
 no ip address
 shutdown
 no fair-queue
!
interface Serial2/1
 no ip address
 shutdown
!
interface Serial2/2
 no ip address
 shutdown
!
interface Serial2/3
 no ip address
 shutdown
!
ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
!
ip nat inside source list 100 interface Ethernet0/0 overload
!

!--- This ACL 100 identifies the traffic flows and be PATed !--- via the outside interface( Ethernet0/0).


access-list 100 deny ip 10.2.1.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 100 permit ip 10.2.1.0 0.0.0.255 any



control-plane
!

!
line con 0
line aux 0
line vty 0 4
!
!
end

Suppression des associations de sécurité (SA)

Utilisez ces commandes dans le mode privilégié du PIX :

  • clear [crypto] ipsec sa - Supprime les SA IPSec actives. Le mot clé crypto est facultatif.

  • clear [crypto] isakmp sa — supprime les SA IKE actives. Le mot clé crypto est facultatif.

Vérifier

Référez-vous à cette section pour vous assurer du bon fonctionnement de votre configuration.

L'Outil Interpréteur de sortie (clients enregistrés uniquement) (OIT) prend en charge certaines commandes show. Utilisez l'OIT pour afficher une analyse de la sortie de la commande show .

Dispositif de sécurité PIX - Commandes show

  • show crypto isakmp sa — Affiche toutes les SA IKE en cours au niveau d'un homologue. 

    pixfirewall#show crypto isakmp sa

     Active SA: 1
    Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
				Total IKE SA: 1

1   IKE Peer: 192.168.1.2
    Type    : L2L             Role    : initiator
    Rekey   : no              State   : MM_ACTIVE

  • show crypto ipsec sa — Affiche toutes les SA IPsec en cours au niveau d'un homologue. 

    pixfirewall#show crypto ipsec sa
			interface: outside
    Crypto map tag: IPSEC, seq num: 10, local addr: 172.16.1.1

      access-list IPSec-traffic permit ip 10.1.1.0 255.255.255.0 10.2.1.0 255.255.255.0
      local ident (addr/mask/prot/port): (10.1.1.0/255.255.255.0/0/0)
      remote ident (addr/mask/prot/port): (10.2.1.0/255.255.255.0/0/0)
      current_peer: 192.168.1.2

      #pkts encaps: 10, #pkts encrypt: 10, #pkts digest: 10
      #pkts decaps: 10, #pkts decrypt: 10, #pkts verify: 10
      #pkts compressed: 0, #pkts decompressed: 0
      #pkts not compressed: 10, #pkts comp failed: 0, #pkts decomp failed: 0
      #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
      #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
      #send errors: 0, #recv errors: 0

      local crypto endpt.: 172.16.1.1, remote crypto endpt.: 192.168.1.2

      path mtu 1500, ipsec overhead 58, media mtu 1500
      current outbound spi: 537BC76F

    inbound esp sas:
      spi: 0x64D800CB (1691877579)
         transform: esp-des esp-md5-hmac none
         in use settings ={L2L, Tunnel, }
         slot: 0, conn_id: 1, crypto-map: IPSEC
         sa timing: remaining key lifetime (kB/sec): (4274999/3506)
         IV size: 8 bytes
         replay detection support: Y
    outbound esp sas:
      spi: 0x537BC76F (1400620911)
         transform: esp-des esp-md5-hmac none
         in use settings ={L2L, Tunnel, }
         slot: 0, conn_id: 1, crypto-map: IPSEC
         sa timing: remaining key lifetime (kB/sec): (4274999/3506)
         IV size: 8 bytes
         replay detection support: Y

Routeur IOS distant - Commandes show

  • show crypto isakmp sa—Affiche toutes les IKE SA actuelles chez un homologue. 

    Router#show crypto isakmp sa
dst             src             state          conn-id slot status
192.168.1.2     172.16.1.1      QM_IDLE              2    0 ACTIVE

  • show crypto ipsec sa : affiche toutes les SA IPsec actuelles sur un homologue. 

    Router#show crypto ipsec sa
		interface: Ethernet0/0
    Crypto map tag: IPSEC, local addr 192.168.1.2

   protected vrf: (none)
   local  ident (addr/mask/prot/port): (10.2.1.0/255.255.255.0/0/0)
   remote ident (addr/mask/prot/port): (10.1.1.0/255.255.255.0/0/0)
   current_peer 172.16.1.1 port 500
     PERMIT, flags={}
    #pkts encaps: 10, #pkts encrypt: 10, #pkts digest: 10
    #pkts decaps: 10, #pkts decrypt: 10, #pkts verify: 10
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 192.168.1.2, remote crypto endpt.: 172.16.1.1
     path mtu 1500, ip mtu 1500, ip mtu idb Ethernet0/0
     current outbound spi: 0x64D800CB(1691877579)

     inbound esp sas:
      spi: 0x537BC76F(1400620911)
        transform: esp-des esp-md5-hmac ,
        in use settings ={Tunnel, }
        conn id: 2001, flow_id: SW:1, crypto map: IPSEC
        sa timing: remaining key lifetime (k/sec): (4390267/3494)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x64D800CB(1691877579)
        transform: esp-des esp-md5-hmac ,
        in use settings ={Tunnel, }
        conn id: 2002, flow_id: SW:2, crypto map: IPSEC
        sa timing: remaining key lifetime (k/sec): (4390267/3492)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     outbound ah sas:

     outbound pcp sas:

Dépannage

Cette section fournit des informations que vous pouvez utiliser pour dépanner votre configuration. L'exemple de sortie Debug est également affiché.

L'Outil Interpréteur de sortie (clients enregistrés uniquement) (OIT) prend en charge certaines commandes show. Utilisez l'OIT pour afficher une analyse de la sortie de la commande show .

Remarque : reportez-vous à Informations importantes sur les commandes de débogage et le dépannage de la sécurité IP - Présentation et utilisation des commandes de débogage avant d'émettre des commandes de débogage.

Appliance de sécurité PIX - sortie de débogage 

PIX#debug crypto isakmp 7
 Feb 22 01:39:59 [IKEv1 DEBUG]: Pitcher: received a key acquire mess
age, spi 0x0
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE Initiator: New Phase 1, Intf insi
de, IKE Peer 192.168.1.2  local Proxy Address 10.1.1.0, remote Proxy Address 10.
2.1.0,  Crypto map (IPSEC)
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing ISAKMP SA payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing Fragmentation VID
+ extended capabilities payload
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=0)
with payloads : HDR + SA (1) + VENDOR (13) + NONE (0) total length : 144
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=0)
 with payloads : HDR + SA (1) + NONE (0) total length : 84
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing SA payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Oakley proposal is acceptable
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing ke payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing nonce payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing Cisco Unity VID pa
yload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing xauth V6 VID paylo
ad
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Send IOS VID
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Constructing ASA spoofing IOS V
endor ID payload (version: 1.0.0, capabilities: 20000001)
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Send Altiga/Cisco VPN3000/Cisco
 ASA GW VID
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=0)
with payloads : HDR + KE (4) + NONCE (10) + VENDOR (13) + VENDOR (13) + VENDOR (
13) + VENDOR (13) + NONE (0) total length : 224
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=0)
 with payloads : HDR + KE (4) + NONCE (10) + VENDOR (13) + VENDOR (13) + VENDOR
(13) + VENDOR (13) + NONE (0) total length : 224
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing ke payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing ISA_KE payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing nonce payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Received Cisco Unity client VID
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Received DPD VID
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Processing IOS/PIX Vendor ID pa
yload (version: 1.0.0, capabilities: 0000077f)
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Received xauth V6 VID
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, Connection landed on tunnel_group 192
.168.1.2
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Generating
 keys for Initiator...
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng ID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng hash payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Computing
hash for ISAKMP
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Constructing IOS keep alive pay
load: proposal=32767/32767 sec.
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng dpd vid payload
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=0)
with payloads : HDR + ID (5) + HASH (8) + IOS KEEPALIVE (128) + VENDOR (13) + NO
NE (0) total length : 92
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=0)
 with payloads : HDR + ID (5) + HASH (8) + NONE (0) total length : 60
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 ID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 hash payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Computing
hash for ISAKMP
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, Connection landed on tunnel_group 192
.168.1.2
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, Freeing previous
ly allocated memory for authorization-dn-attributes
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Oakley beg
in quick mode
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, PHASE 1 COMPLETE
D
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, Keep-alive type for this connection:
DPD
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Starting P
1 rekey timer: 82080 seconds.
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, IKE got SP
I from key engine: SPI = 0x81004014
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, oakley con
stucting quick mode
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng blank hash payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng IPSec SA payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng IPSec nonce payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng proxy ID
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Transmitti
ng Proxy Id:
  Local subnet:  10.1.1.0  mask 255.255.255.0 Protocol 0  Port 0
  Remote subnet: 10.2.1.0  Mask 255.255.255.0 Protocol 0  Port 0
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng qm hash payload
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=270
72fbd) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) +
NOTIFY (11) + NONE (0) total length : 192
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=27
072fbd) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) +
 NOTIFY (11) + NONE (0) total length : 192
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 hash payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 SA payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 nonce payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 ID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 ID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 notify payload
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, Responder forcin
g change of IPSec rekeying duration from 28800 to 3600 seconds
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, loading al
l IPSEC SAs
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Generating
 Quick Mode Key!
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Generating
 Quick Mode Key!
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, Security negotia
tion complete for LAN-to-LAN Group (192.168.1.2)  Initiator, Inbound SPI = 0x810
04014, Outbound SPI = 0x07502a09
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, oakley con
structing final quick mode
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=270
72fbd) with payloads : HDR + HASH (8) + NONE (0) total length : 72
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, IKE got a
KEY_ADD msg for SA: SPI = 0x07502a09
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Pitcher: r
eceived KEY_UPDATE, spi 0x81004014
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Starting P
2 rekey timer: 3060 seconds.
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, PHASE 2 COMPLETE
D (msgid=27072fbd)
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Sending ke
ep-alive of type DPD R-U-THERE (seq number 0x280e6479)
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng blank hash payload
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng qm hash payload
Feb 22 01:40:14 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=8fb
a0b26) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 80
Feb 22 01:40:14 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=7a
18c21c) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 8
0
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 hash payload
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 notify payload
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Received k
eep-alive of type DPD R-U-THERE-ACK (seq number 0x280e6479)


pixfirewall#debug crypto ipsec 7
IPSEC: New embryonic SA created @ 0x01B84200,
    SCB: 0x028BB1D8,
    Direction: inbound
    SPI      : 0xAD0608C2
    Session ID: 0x00000004
    VPIF num  : 0x00000002
    Tunnel type: l2l
    Protocol   : esp
    Lifetime   : 240 seconds
IPSEC: New embryonic SA created @ 0x029956A0,
    SCB: 0x0291BAD0,
    Direction: outbound
    SPI      : 0x9BEF30FB
    Session ID: 0x00000004
    VPIF num  : 0x00000002
    Tunnel type: l2l
    Protocol   : esp
    Lifetime   : 240 seconds
IPSEC: Completed host OBSA update, SPI 0x9BEF30FB
IPSEC: Creating outbound VPN context, SPI 0x9BEF30FB
    Flags: 0x00000005
    SA   : 0x029956A0
    SPI  : 0x9BEF30FB
    MTU  : 1500 bytes
    VCID : 0x00000000
    Peer : 0x00000000
    SCB  : 0x0291BAD0
    Channel: 0x01727178
IPSEC: Completed outbound VPN context, SPI 0x9BEF30FB
    VPN handle: 0x0001C9AC
IPSEC: New outbound encrypt rule, SPI 0x9BEF30FB
    Src addr: 10.1.1.0
    Src mask: 255.255.255.0
    Dst addr: 10.2.1.0
    Dst mask: 255.255.255.0
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 0
    Use protocol: false
    SPI: 0x00000000
    Use SPI: false
IPSEC: Completed outbound encrypt rule, SPI 0x9BEF30FB
    Rule ID: 0x029197A8
IPSEC: New outbound permit rule, SPI 0x9BEF30FB
    Src addr: 172.16.1.1
    Src mask: 255.255.255.255
    Dst addr: 192.168.1.2
    Dst mask: 255.255.255.255
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 50
    Use protocol: true
    SPI: 0x9BEF30FB
    Use SPI: true
IPSEC: Completed outbound permit rule, SPI 0x9BEF30FB
    Rule ID: 0x02996888
IPSEC: Completed host IBSA update, SPI 0xAD0608C2
IPSEC: Creating inbound VPN context, SPI 0xAD0608C2
    Flags: 0x00000006
    SA   : 0x01B84200
    SPI  : 0xAD0608C2
    MTU  : 0 bytes
    VCID : 0x00000000
    Peer : 0x0001C9AC
    SCB  : 0x028BB1D8
    Channel: 0x01727178
IPSEC: Completed inbound VPN context, SPI 0xAD0608C2
    VPN handle: 0x00020724
IPSEC: Updating outbound VPN context 0x0001C9AC, SPI 0x9BEF30FB
    Flags: 0x00000005
    SA   : 0x029956A0
    SPI  : 0x9BEF30FB
    MTU  : 1500 bytes
    VCID : 0x00000000
    Peer : 0x00020724
    SCB  : 0x0291BAD0
    Channel: 0x01727178
IPSEC: Completed outbound VPN context, SPI 0x9BEF30FB
    VPN handle: 0x0001C9AC
IPSEC: Completed outbound inner rule, SPI 0x9BEF30FB
    Rule ID: 0x029197A8
IPSEC: Completed outbound outer SPD rule, SPI 0x9BEF30FB
    Rule ID: 0x02996888
IPSEC: New inbound tunnel flow rule, SPI 0xAD0608C2
    Src addr: 10.2.1.0
    Src mask: 255.255.255.0
    Dst addr: 10.1.1.0
    Dst mask: 255.255.255.0
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 0
    Use protocol: false
    SPI: 0x00000000
    Use SPI: false
IPSEC: Completed inbound tunnel flow rule, SPI 0xAD0608C2
    Rule ID: 0x02918E30
IPSEC: New inbound decrypt rule, SPI 0xAD0608C2
    Src addr: 192.168.1.2
    Src mask: 255.255.255.255
    Dst addr: 172.16.1.1
    Dst mask: 255.255.255.255
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 50
    Use protocol: true
    SPI: 0xAD0608C2
    Use SPI: true
IPSEC: Completed inbound decrypt rule, SPI 0xAD0608C2
    Rule ID: 0x02997CD0
IPSEC: New inbound permit rule, SPI 0xAD0608C2
    Src addr: 192.168.1.2
    Src mask: 255.255.255.255
    Dst addr: 172.16.1.1
    Dst mask: 255.255.255.255
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 50
    Use protocol: true
    SPI: 0xAD0608C2
    Use SPI: true
IPSEC: Completed inbound permit rule, SPI 0xAD0608C2
    Rule ID: 0x029964F0

Routeur IOS distant - Sortie de débogage 

Router#debug crypto isakmp
*Feb 22 13:51:57.319: ISAKMP (0:0): received packet from 172.16.1.1 dport 500 sp
ort 500 Global (N) NEW SA
*Feb 22 13:51:57.319: ISAKMP: Created a peer struct for 172.16.1.1, peer port 50
0
*Feb 22 13:51:57.319: ISAKMP: New peer created peer = 0x64C2864C peer_handle = 0
x80000005
*Feb 22 13:51:57.319: ISAKMP: Locking peer struct 0x64C2864C, IKE refcount 1 for
 crypto_isakmp_process_block
*Feb 22 13:51:57.319: ISAKMP: local port 500, remote port 500
*Feb 22 13:51:57.323: insert sa successfully sa = 65166F40
*Feb 22 13:51:57.323: ISAKMP:(0:0:N/A:0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Feb 22 13:51:57.323: ISAKMP:(0:0:N/A:0):Old State = IKE_READY  New State = IKE_
R_MM1

*Feb 22 13:51:57.323: ISAKMP:(0:0:N/A:0): processing SA payload. message ID = 0
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0): processing vendor id payload
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0): vendor ID seems Unity/DPD but major 19
4 mismatch
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0):found peer pre-shared key matching 172.
16.1.1
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0): local preshared key found
*Feb 22 13:51:57.327: ISAKMP : Scanning profiles for xauth ...
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0):Checking ISAKMP transform 1 against pri
ority 10 policy
*Feb 22 13:51:57.327: ISAKMP:      default group 1
*Feb 22 13:51:57.327: ISAKMP:      encryption DES-CBC
*Feb 22 13:51:57.327: ISAKMP:      hash MD5
*Feb 22 13:51:57.327: ISAKMP:      auth pre-share
*Feb 22 13:51:57.327: ISAKMP:      life type in seconds
*Feb 22 13:51:57.327: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
*Feb 22 13:51:57.331: ISAKMP:(0:0:N/A:0):atts are acceptable. Next payload is 3
*Feb 22 13:51:57.415: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.415: ISAKMP:(0:1:SW:1): vendor ID seems Unity/DPD but major 194
 mismatch
*Feb 22 13:51:57.419: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_M
AIN_MODE
*Feb 22 13:51:57.419: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM1  New State = IKE_R
_MM1

*Feb 22 13:51:57.423: ISAKMP:(0:1:SW:1): sending packet to 172.16.1.1 my_port 50
0 peer_port 500 (R) MM_SA_SETUP
*Feb 22 13:51:57.423: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_C
OMPLETE
*Feb 22 13:51:57.423: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM1  New State = IKE_R
_MM2

*Feb 22 13:51:57.427: ISAKMP (0:134217729): received packet from 172.16.1.1 dpor
t 500 sport 500 Global (R) MM_SA_SETUP
*Feb 22 13:51:57.427: ISAKMP:(0:1:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Feb 22 13:51:57.431: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM2  New State = IKE_R
_MM3

*Feb 22 13:51:57.431: ISAKMP:(0:1:SW:1): processing KE payload. message ID = 0
*Feb 22 13:51:57.539: ISAKMP:(0:1:SW:1): processing NONCE payload. message ID =
0
*Feb 22 13:51:57.539: ISAKMP:(0:1:SW:1):found peer pre-shared key matching 172.1
6.1.1
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1):SKEYID state generated
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): vendor ID is Unity
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): vendor ID seems Unity/DPD but major 46
mismatch
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): vendor ID is XAUTH
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1): speaking to another IOS box!
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1):vendor ID seems Unity/DPD but hash misma
tch
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_M
AIN_MODE
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM3  New State = IKE_R
_MM3

*Feb 22 13:51:57.551: ISAKMP:(0:1:SW:1): sending packet to 172.16.1.1 my_port 50
0 peer_port 500 (R) MM_KEY_EXCH
*Feb 22 13:51:57.551: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_C
OMPLETE
*Feb 22 13:51:57.551: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM3  New State = IKE_R
_MM4

*Feb 22 13:51:57.559: ISAKMP (0:134217729): received packet from 172.16.1.1 dpor
t 500 sport 500 Global (R) MM_KEY_EXCH
*Feb 22 13:51:57.559: ISAKMP:(0:1:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Feb 22 13:51:57.559: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM4  New State = IKE_R
_MM5

*Feb 22 13:51:57.563: ISAKMP:(0:1:SW:1): processing ID payload. message ID = 0
*Feb 22 13:51:57.563: ISAKMP (0:134217729): ID payload
        next-payload : 8
        type         : 1
        address      : 172.16.1.1
        protocol     : 17
        port         : 500
        length       : 12
*Feb 22 13:51:57.563: ISAKMP:(0:1:SW:1):: peer matches *none* of the profiles
*Feb 22 13:51:57.563: ISAKMP:(0:1:SW:1): processing HASH payload. message ID = 0
*Feb 22 13:51:57.567: ISAKMP:received payload type 17
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1): vendor ID is DPD
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1):SA authentication status:
        authenticated
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1):SA has been authenticated with 172.16.1.
1
*Feb 22 13:51:57.567: ISAKMP: Trying to insert a peer 192.168.1.2/172.16.1.1/500
/,  and inserted successfully 64C2864C.
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_M
AIN_MODE
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM5  New State = IKE_R
_MM5

*Feb 22 13:51:57.571: ISAKMP:(0:1:SW:1):SA is doing pre-shared key authenticatio
n using id type ID_IPV4_ADDR
*Feb 22 13:51:57.571: ISAKMP (0:134217729): ID payload
        next-payload : 8
        type         : 1
        address      : 192.168.1.2
        protocol     : 17
        port         : 500
        length       : 12
*Feb 22 13:51:57.571: ISAKMP:(0:1:SW:1):Total payload length: 12
*Feb 22 13:51:57.575: ISAKMP:(0:1:SW:1): sending packet to 172.16.1.1 my_port 50
0 peer_port 500 (R) MM_KEY_EXCH
*Feb 22 13:51:57.575: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_C
OMPLETE
*Feb 22 13:51:57.575: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM5  New State = IKE_P
1_COMPLETE

*Feb 22 13:51:57.579: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PHASE1_CO
MPLETE
*Feb 22 13:51:57.579: ISAKMP:(0:1:SW:1):Old State = IKE_P1_COMPLETE  New State =
 IKE_P1_COMPLETE

*Feb 22 13:51:57.583: ISAKMP (0:134217729): received packet from 172.16.1.1 dpor
t 500 sport 500 Global (R) QM_IDLE
*Feb 22 13:51:57.583: ISAKMP: set new node 328663488 to QM_IDLE
*Feb 22 13:51:57.587: ISAKMP:(0:1:SW:1): processing HASH payload. message ID = 3
28663488
*Feb 22 13:51:57.587: ISAKMP:(0:1:SW:1): processing SA payload. message ID = 328
663488
*Feb 22 13:51:57.587: ISAKMP:(0:1:SW:1):Checking IPSec proposal 1
*Feb 22 13:51:57.587: ISAKMP: transform 1, ESP_DES
*Feb 22 13:51:57.591: ISAKMP:   attributes in transform:
*Feb 22 13:51:57.591: ISAKMP:      SA life type in seconds
*Feb 22 13:51:57.591: ISAKMP:      SA life duration (basic) of 28800
*Feb 22 13:51:57.591: ISAKMP:      SA life type in kilobytes
*Feb 22 13:51:57.591: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Feb 22 13:51:57.595: ISAKMP:      encaps is 1 (Tunnel)
*Feb 22 13:51:57.595: ISAKMP:      authenticator is HMAC-MD5
*Feb 22 13:51:57.595: ISAKMP:(0:1:SW:1):atts are acceptable.
*Feb 22 13:51:57.595: ISAKMP:(0:1:SW:1): processing NONCE payload. message ID =
328663488
*Feb 22 13:51:57.595: ISAKMP:(0:1:SW:1): processing ID payload. message ID = 328
663488
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1): processing ID payload. message ID = 328
663488
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1): processing NOTIFY INITIAL_CONTACT proto
col 1
        spi 0, message ID = 328663488, sa = 65166F40
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1):SA authentication status:
        authenticated
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1): Process initial contact,
bring down existing phase 1 and 2 SA's with local 192.168.1.2 remote 172.16.1.1
remote port 500
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1): asking for 1 spis from ipsec
*Feb 22 13:51:57.603: ISAKMP:(0:1:SW:1):Node 328663488, Input = IKE_MESG_FROM_PE
ER, IKE_QM_EXCH
*Feb 22 13:51:57.603: ISAKMP:(0:1:SW:1):Old State = IKE_QM_READY  New State = IK
E_QM_SPI_STARVE
*Feb 22 13:51:57.603: ISAKMP: received ke message (2/1)
*Feb 22 13:51:57.611: ISAKMP: Locking peer struct 0x64C2864C, IPSEC refcount 1 f
or for stuff_ke
*Feb 22 13:51:57.611: ISAKMP:(0:1:SW:1): Creating IPSec SAs
*Feb 22 13:51:57.611:         inbound SA from 172.16.1.1 to 192.168.1.2 (f/i)  0
/ 0
        (proxy 10.1.1.0 to 10.2.1.0)
*Feb 22 13:51:57.611:         has spi 0x1BB01835 and conn_id 0 and flags 2
*Feb 22 13:51:57.611:         lifetime of 28800 seconds
*Feb 22 13:51:57.611:         lifetime of 4608000 kilobytes
*Feb 22 13:51:57.611:         has client flags 0x0
*Feb 22 13:51:57.611:         outbound SA from 192.168.1.2 to 172.16.1.1 (f/i) 0
/0
        (proxy 10.2.1.0 to 10.1.1.0)
*Feb 22 13:51:57.611:         has spi 1995623635 and conn_id 0 and flags A
*Feb 22 13:51:57.611:         lifetime of 28800 seconds
*Feb 22 13:51:57.611:         lifetime of 4608000 kilobytes
*Feb 22 13:51:57.611:         has client flags 0x0
*Feb 22 13:51:57.615: ISAKMP:(0:1:SW:1): sending packet to 172.16.1.1 my_port 50
0 peer_port 500 (R) QM_IDLE
*Feb 22 13:51:57.615: ISAKMP:(0:1:SW:1):Node 328663488, Input = IKE_MESG_FROM_IP
SEC, IKE_SPI_REPLY
*Feb 22 13:51:57.615: ISAKMP:(0:1:SW:1):Old State = IKE_QM_SPI_STARVE  New State
 = IKE_QM_R_QM2
*Feb 22 13:51:57.619: ISAKMP: Locking peer struct 0x64C2864C, IPSEC refcount 2 f
or from create_transforms
*Feb 22 13:51:57.619: ISAKMP: Unlocking IPSEC struct 0x64C2864C from create_tran
sforms, count 1
*Feb 22 13:51:57.631: ISAKMP (0:134217729): received packet from 172.16.1.1 dpor
t 500 sport 500 Global (R) QM_IDLE
*Feb 22 13:51:57.635: ISAKMP:(0:1:SW:1):deleting node 328663488 error FALSE reas
on "QM done (await)"
*Feb 22 13:51:57.635: ISAKMP:(0:1:SW:1):Node 328663488, Input = IKE_MESG_FROM_PE
ER, IKE_QM_EXCH
*Feb 22 13:51:57.635: ISAKMP:(0:1:SW:1):Old State = IKE_QM_R_QM2  New State = IK
E_QM_PHASE2_COMPLETE
Router#debug crypto ipsec
*Feb 22 13:57:41.187: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 192.168.1.2, remote= 172.16.1.1,
    local_proxy= 10.2.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x2
*Feb 22 13:57:41.187: Crypto mapdb : proxy_match
        src addr     : 10.2.1.0
        dst addr     : 10.1.1.0
        protocol     : 0
        src port     : 0
        dst port     : 0
*Feb 22 13:57:41.191: IPSEC(key_engine): got a queue event with 1 kei messages
*Feb 22 13:57:41.191: IPSEC(key_engine): got a queue event with 1 kei messages
*Feb 22 13:57:41.191: IPSEC(spi_response): getting spi 2616144123 for SA
        from 192.168.1.2 to 172.16.1.1 for prot 3
*Feb 22 13:57:41.199: IPSEC(key_engine): got a queue event with 2 kei messages
*Feb 22 13:57:41.199: IPSEC(initialize_sas): ,
  (key eng. msg.) INBOUND local= 192.168.1.2, remote= 172.16.1.1,
    local_proxy= 10.2.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac  (Tunnel),
    lifedur= 28800s and 4608000kb,
    spi= 0x9BEF30FB(2616144123), conn_id= 0, keysize= 0, flags= 0x2
*Feb 22 13:57:41.203: IPSEC(initialize_sas): ,
  (key eng. msg.) OUTBOUND local= 192.168.1.2, remote= 172.16.1.1,
    local_proxy= 10.2.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac  (Tunnel),
    lifedur= 28800s and 4608000kb,
    spi= 0xAD0608C2(2902853826), conn_id= 0, keysize= 0, flags= 0xA
*Feb 22 13:57:41.203: Crypto mapdb : proxy_match
        src addr     : 10.2.1.0
        dst addr     : 10.1.1.0
        protocol     : 0
        src port     : 0
        dst port     : 0
*Feb 22 13:57:41.203: IPSec: Flow_switching Allocated flow for sibling 80000005
*Feb 22 13:57:41.207: IPSEC(policy_db_add_ident): src 10.2.1.0, dest 10.1.1.0, d
est_port 0

*Feb 22 13:57:41.207: IPSEC(create_sa): sa created,
  (sa) sa_dest= 192.168.1.2, sa_proto= 50,
    sa_spi= 0x9BEF30FB(2616144123),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2002
*Feb 22 13:57:41.207: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.1.1, sa_proto= 50,
    sa_spi= 0xAD0608C2(2902853826),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2001
*Feb 22 13:57:41.475: IPSEC(key_engine): got a queue event with 1 kei messages
*Feb 22 13:57:41.475: IPSEC(key_engine_enable_outbound): rec'd enable notify fro
m ISAKMP
*Feb 22 13:57:41.475: IPSEC(key_engine_enable_outbound): enable SA with spi 2902
853826/50

Informations connexes

Historique de révision

Révision Date de publication Commentaires
1.0
16-Feb-2007
Première publication

Ce document vous est-il utile?

FeedbackCommentaires

Contacter Cisco

Ce document s’applique à ces produits