Détermination du numéro de série des composants du commutateur Catalyst

Options de téléchargement

  • PDF     (281.0 KB)
    Consulter à l'aide d'Adobe Reader sur un grand nombre d'appareils
Mis à jour:29 août 2024
ID du document:41361

Langage exempt de préjugés

Dans le cadre de la documentation associée à ce produit, nous nous efforçons d’utiliser un langage exempt de préjugés. Dans cet ensemble de documents, le langage exempt de discrimination renvoie à une langue qui exclut la discrimination en fonction de l’âge, des handicaps, du genre, de l’appartenance raciale de l’identité ethnique, de l’orientation sexuelle, de la situation socio-économique et de l’intersectionnalité. Des exceptions peuvent s’appliquer dans les documents si le langage est codé en dur dans les interfaces utilisateurs du produit logiciel, si le langage utilisé est basé sur la documentation RFP ou si le langage utilisé provient d’un produit tiers référencé. Découvrez comment Cisco utilise le langage inclusif.

À propos de cette traduction

Cisco a traduit ce document en traduction automatisée vérifiée par une personne dans le cadre d’un service mondial permettant à nos utilisateurs d’obtenir le contenu d’assistance dans leur propre langue. Il convient cependant de noter que même la meilleure traduction automatisée ne sera pas aussi précise que celle fournie par un traducteur professionnel.

    Introduction

    Ce document décrit comment déterminer les numéros de série de divers composants remplaçables sur les commutateurs Cisco Catalyst.

    Conditions préalables

    Exigences

    Aucune exigence spécifique n'est associée à ce document.

    Composants utilisés

    Les informations contenues dans ce document sont basées sur les versions de matériel et de logiciel suivantes :

    • Divers commutateurs Catalyst

    • Diverses versions de logiciel

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. Si votre réseau est en ligne, assurez-vous de bien comprendre l’incidence possible des commandes.

    Conventions

    Pour plus d'informations sur les conventions utilisées dans ce document, reportez-vous à Conventions relatives aux conseils techniques Cisco.

    Informations générales

    Les numéros de série sont nécessaires pour créer une base de données des parties dans le réseau. Quand vous créez une demande de service avec l'assistance technique Cisco, vous devez avoir le numéro de série des périphériques affectés en main. Cette condition est particulièrement le cas quand vous avez besoin d'une pièce de rechange ou d'une autorisation de retour de matériel (RMA).

    Le numéro de série des commutateurs Cisco Catalyst ne peut pas être modifié. Pour des raisons de gestion, vous pouvez configurer les commutateurs Cisco Catalyst qui exécutent le logiciel Cisco IOS® pour qu'ils renvoient une chaîne personnalisée. Pour créer une chaîne personnalisée, émettez la commande snmp-server chassis-id dans le mode de configuration globale.

    Remarque : pour plus d'informations sur les commandes show, consultez Commandes show.

    Catalyst 6500

    Pour déterminer le numéro de série du châssis et des autres composants, exécutez la commande suivanteshow idprom:

    6506#show idprom ?
  all           selects all FRU-types
  backplane     specify backplane
  clock         specify clock <number>
  earl          specify earl <slot>
  fan-tray      specify fan-tray <number>
  interface     interface name
  module        specify module <slot>
  power-supply  specify power-supply <number>
  rp            specify RP (MSFC) <slot>
  supervisor    specify supervisor <slot>
  vtt           specify VTT <number>

    Pour obtenir le numéro de série du châssis, exécutez la commande show idprom backplane :

    6506#show idprom backplane 
IDPROM for backplane #0
  (FRU is 'Catalyst 6500 6-slot backplane')
  OEM String = 'Cisco Systems'
  Product Number = 'WS-C6506'
  Serial Number = 'TBA03270652'
  Manufacturing Assembly Number = '73-3436-01'
  Manufacturing Assembly Revision = 'A0'
  Hardware Revision = 1.0
  Current supplied (+) or consumed (-) =  -A

    Pour obtenir le numéro de série du module, émettez la commande show idprom module slot <slot number>. Vous pouvez également émettre la commande show module :

    6506#show module 
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1    2  Catalyst 6000 supervisor 2 (Active)    WS-X6K-S2U-MSFC2   SAD055006NE
  3    0  2 port adapter FlexWAN                 WS-X6182-2PA       SAD04350EEU
  4   48  SFM-capable 48-port 10/100 Mbps RJ45   WS-X6548-RJ-45     SAD055108C2

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  0001.6415.a602 to 0001.6415.a603   3.2   6.1(3)       7.5(0.6)HUB6 Ok      
  3  0001.6413.c86b to 0001.6413.c8aa   1.5   12.1(13)E1   12.1(13)E1   Ok      
  4  0001.63d3.e77a to 0001.63d3.e7a9   4.0   6.3(1)       7.5(0.6)HUB6 Ok      

Mod Sub-Module                  Model           Serial           Hw     Status 
--- --------------------------- --------------- --------------- ------- -------
  1 Policy Feature Card 2       WS-F6K-PFC2     SAD055004VA      3.0    Ok     
  1 Cat6k MSFC 2 daughterboard  WS-F6K-MSFC2    SAD055006VF      2.0    Ok     

Mod Online Diag Status 
--- -------------------
  1 Pass               
  3 Not Supported      
  4 Pass

    Remarque : utilisez la commandeshow diagbus pour déterminer le numéro de série des cartes de ports sur le module Flex WAN.

    Catalyst 4500

    Supervisor Engine II+/III/IV du Catalyst 4500

    Pour déterminer le numéro de série du châssis et d'autres composants, utilisez la commande show idprom :

    Switch#show idprom ?
  all           show all non-interface IDPROMs
  chassis       show IDPROM for chassis
  fan-tray      show IDPROM for system fan tray
  interface     show contents of gbic connected to this interface
  module        show IDPROM for module
  power-supply  show IDPROM for power supply
  supervisor    show IDPROM for supervisor

    Pour obtenir le numéro de série du châssis, utilisez la commande suivanteshow idprom chassis:

    Switch#show idprom chassis 
Chassis Idprom : 
 Common Block Signature = 0xABAB
 Common Block Version = 1
 Common Block Length = 144
 Common Block Checksum = 4081
 Idprom Size = 256
 Block Count = 2
 FRU Major Type = 0x4001
 FRU Minor Type = 37
 OEM String = Cisco Systems, Inc.
 Product Number = WS-C4506
 Serial Number = FOX0627A001
 Part Number = 73-8107-04
 Part Revision = 01
 Manufacturing Deviation String = 0
 Hardware Revision = 0.4
 Manufacturing Bits = 0x0000
 Engineering Bits = 0x0000
 Snmp OID = 0.0.0.0.0.0.0.0
 Power Consumption = 0
 RMA Failure Code = 0 0 0 0
 Chassis Block Signature = 0x4001
 Chassis Block Version = 1
 Chassis Block Length = 22
 Chassis Block Checksum = 628
 Feature Bits = 0x0000000000000000
 MAC Base = 000a.4172.df40
 MAC Count = 64

    Pour obtenir le numéro de série de l'alimentation, utilisez la commande show idprom power-supply {1 | 2} commande :

    Switch#show idprom power-supply 1
Power Supply 1 Idprom :
 Common Block Signature = 0xABAB
 Common Block Version = 1
 Common Block Length = 144
 Common Block Checksum = 5857
 Idprom Size = 256
 Block Count = 2
 FRU Major Type = 0x4501
 FRU Minor Type = 1
 OEM String = Cisco Systems, Inc.
 Product Number = PWR-C4K-1400AC
 Serial Number = ABC06260005
 Part Number = 34-1846-01
 Part Revision = 45
 Manufacturing Deviation String = 
 Hardware Revision = 1.0
 Manufacturing Bits = 0x0000
 Engineering Bits = 0x0000
 Snmp OID = 22616.22616.22616.22616.22616.22616.22616.22616
 Power Consumption = 1400
 RMA Failure Code = 0 0 0 0
 Power Supply  Block Signature = 0x4501
 PowerSupply Block Version = 1
 PowerSupply Block Length = 20
 PowerSupply Block Checksum = 293
 Feature Bits = 0x0000000000000000
 Current @ 110V = 17
 Current @ 220V = 9
 StackMIB OID = 22616

    Pour obtenir le numéro de série du module, utilisez la commande show idprom module slot <slot number>. Vous pouvez également utiliser la commande show module :

    Switch#show module 

Mod  Ports Card Type                              Model             Serial No.
----+-----+--------------------------------------+-----------------+-----------
 1      2  1000BaseX (GBIC) Supervisor(active)    WS-X4014          JAB054109H1 
 3     48  10/100BaseTX (RJ45)                    WS-X4148          JAB025202M6 
 4      6  1000BaseX (GBIC)                       WS-X4306          JAB023403BG 

 M MAC addresses                    Hw  Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
 1 000a.4172.df40 to 000a.4172.df41 0.5 12.1(12r)EW  12.1(13)EW(0.34) Ok       
 3 0050.730b.2340 to 0050.730b.236f 1.0                               Ok       
 4 0010.7bfa.7ca4 to 0010.7bfa.7ca9 2.0                               Ok

    Catalyst 3750

    Employez la commande show version pour déterminer le numéro de série du châssis et le type de modèle du commutateur, comme indiqué dans cet exemple. Vous trouvez tous les membres de la pile de commutateurs, le châssis et les informations de numéros de série dans la sortie :

    3750#show version
Cisco Internetwork Operating System Software
Cisco IOS (tm) C3750 Software (C3750-I5-M), Version 12.1(14)EA1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 22-Jul-03 13:17 by antonino
Image text-base: 0x00003000, data-base: 0x008F0CF8

ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(11r)AX, RELEASE SOFTWARE (fc1)

3750RJ uptime is 1 hour, 29 minutes
System returned to ROM by power-on
System image file is "flash:c3750-i5-mz.121.14-EA1/c3750-i5-mz.121.14-EA1.bin"

cisco WS-C3750-24TS (PowerPC405) processor (revision A0) with 120822K/10240K byt
es of memory.
Processor board ID CAT0726R0ZU
Last reset from power-on
Bridging software.
2 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
16 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:0D:29:B4:18:00
Motherboard assembly number : 73-7055-06
Power supply part number : 341-0034-01
Motherboard serial number : CAT0726043V
Power supply serial number : PHI0708009K
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750-24TS-E
System serial number : CAT0726R0ZU

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3750-24TS 12.1(14)EA1 C3750-I5-M
2 26 WS-C3750-24TS 12.1(14)EA1 C3750-I5-M
3 12 WS-C3750G-12S 12.1(14)EA1 C3750-I5-M

Switch 02
---------
Switch Uptime : 1 hour, 29 minutes
Base ethernet MAC Address : 00:0D:29:B4:3F:00
Motherboard assembly number : 73-7055-06
Power supply part number : 341-0034-01
Motherboard serial number : CAT07260438
Power supply serial number : PHI0708008X
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750-24TS-E
System serial number : CAT0726R10A

Switch 03
---------
Switch Uptime : 1 hour, 29 minutes
Base ethernet MAC Address : 00:0D:BD:6A:3E:00
Motherboard assembly number : 73-8307-06
Power supply part number : 341-0048-01
Motherboard serial number : CAT073205S2
Power supply serial number : DTH0731055Z
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750G-12S-E
System serial number : CAT0732R0M4
Top assembly part number : 800-23419-01
Top assembly revision number : A0

Configuration register is 0xF

3750#

    Catalyst 3560

    Pour déterminer le numéro de série du châssis et le type de modèle de commutateur, utilisez la commande show version :

    3560#show version
Cisco Internetwork Operating System Software
Cisco IOS (tm) C3560 Software (C3560-I5-M), Version 12.1(19)EA1c, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 03-Feb-04 05:56 by yenanh
Image text-base: 0x00003000, data-base: 0x0091D404

ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.1(19r)EA1b, RELEASE SOFTWARE (fc2)

3-8-03-CATS3560 uptime is 8 weeks, 4 days, 18 hours, 16 minutes
System returned to ROM by power-on
System image file is "flash:c3560-i5-mz.121-19.EA1c.bin"

cisco WS-C3560-24PS (PowerPC405) processor (revision D0) with 118776K/12288K bytes of memory.
Processor board ID CSG0802P0G4
Last reset from power-on
Bridging software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:0E:39:E9:32:80
Motherboard assembly number : 73-9299-01
Power supply part number : 341-0029-03
Motherboard serial number : CAT075108EK
Power supply serial number : LIT074900K3
Model revision number : D0
Motherboard revision number : C0
Model number : WS-C3560-24PS-E
System serial number : CSG0802P0G4
Top Assembly Part Number : 800-24814-01
Top Assembly Revision Number : D0
Version ID : N/A
Hardware Board Revision Number : 0x08

    Catalyst 3550

    Pour déterminer le numéro de série du châssis et le type de modèle de commutateur, utilisez la commande show version :

    Cat3550#show version
Cisco Internetwork Operating System Software 
Cisco IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(12c)EA1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 25-Nov-02 00:07 by antonino
Image text-base: 0x00003000, data-base: 0x0075FE48

ROM: Bootstrap program is C3550 boot loader

Cat3550 uptime is 4 days, 2 hours, 57 minutes
System returned to ROM by power-on
System image file is "flash:c3550-i5q3l2-mz.121-12c.EA1.bin"

cisco WS-C3550-48 (PowerPC) processor (revision G0) with 65526K/8192K bytes of memory.
Processor board ID CHK0642W02B
Last reset from warm-reset
Bridging software.
Running Layer2/3 Switching Image

Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
          
Ethernet-controller 3 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 4 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 5 has 1 Gigabit Ethernet/IEEE 802.3 interface

Ethernet-controller 6 has 1 Gigabit Ethernet/IEEE 802.3 interface

48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

The password-recovery mechanism is enabled.
384K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0B:46:8A:2F:80
Motherboard assembly number: 73-5701-07
Power supply part number: 34-0967-01
Motherboard serial number: CAT0641027L
Power supply serial number: DCA06392BU2
Model revision number: G0
Motherboard revision number: A0
Model number: WS-C3550-48-SMI
System serial number: CHK0642W02B
Configuration register is 0x10F

    Catalyst 2950/2970/2940

    Pour déterminer le numéro de série du châssis et le type de modèle de commutateur, utilisez la commande suivanteshow version:

    Cat2950#show version
Cisco Internetwork Operating System Software 
Cisco IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(12c)EA1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 24-Nov-02 23:31 by antonino
Image text-base: 0x80010000, data-base: 0x80562000

ROM: Bootstrap program is CALHOUN boot loader

Cat2950 uptime is 4 days, 2 hours, 52 minutes
System returned to ROM by power-on
System image file is "flash:c2950-i6q4l2-mz.121-12c.EA1.bin"

cisco WS-C2950G-48-EI (RC32300) processor (revision C0) with 21002K bytes of memory.
Processor board ID FHK0624W0HS
Last reset from system-reset
Running Enhanced Image
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:09:E8:89:4A:40
Motherboard assembly number: 73-7409-08
Power supply part number: 34-0965-01
Motherboard serial number: FOC06230ERQ
Power supply serial number: DAB062143BP
Model revision number: C0
Motherboard revision number: B0
Model number: WS-C2950G-48-EI
System serial number: FHK0624W0HS
Configuration register is 0xF

    Catalyst 2900XL/3500XL

    Pour déterminer le numéro de série du châssis et le type de modèle de commutateur, utilisez la commande suivanteshow version:

    Switch#show version
Cisco Internetwork Operating System Software 
Cisco IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.2)XU, MAINTENANCE 
INTERIM SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 17-Jul-00 18:29 by ayounes
Image text-base: 0x00003000, data-base: 0x00301F3C

ROM: Bootstrap program is C3500XL boot loader

Switch uptime is 4 days, 3 hours, 4 minutes
System returned to ROM by power-on
System image file is "flash:c3500XL-c3h2s-mz-120.5.2-XU.bin"

Cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes 
of memory. Processor board ID FOC0616X0RG, with hardware revision 0x00
Last reset from power-on

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:09:7C:8E:78:80
Motherboard assembly number: 73-3903-09
Power supply part number: 34-0971-02
Motherboard serial number: FOC06160L07
Power supply serial number: APQ061200VZ
Model revision number: M0
Motherboard revision number: A0
Model number: WS-C3548-XL-EN
System serial number: FOC0616X0RG
Configuration register is 0xF

    Catalyst 2948GL3/4908G-L3/4980G-L3

    Pour déterminer le numéro de série du châssis, utilisez la commande suivanteshow hardware:

    2948g-l3#show hardware               

Model: Cat-2948G-L3 Date: 17:49:42 UTC Tue Mar 18 2003

XPIF FPGA File:         xpif_fpga_0_72b_CClk.rbt
XPIF FPGA Date:         Wed Dec  8 17:05:42 1999

Slot 0/0: 
     Chip 0  Reset Count: 0       Chip 1  Reset Count: 0  
     Chip 2  Reset Count: 0       Chip 3  Reset Count: 0  
     Chip 4  Reset Count: 0       Chip 5  Reset Count: 0  
     Chip 6  Reset Count: 0       Chip 7  Reset Count: 0  
     Chip 8  Reset Count: 0       Chip 9  Reset Count: 0  
     Chip 10 Reset Count: 0       Chip 11 Reset Count: 0  
EPIF Version     : 0                     CAM size: 32 KB 
Ucode Version    : 1.0
Ucode Image      : EPIF_UCODE_RUNTIME
Port Phy Setup
     Port1 :DONE      Port2 :DONE      Port3 :DONE      Port4 :DONE 
     Port5 :DONE      Port6 :DONE      Port7 :DONE      Port8 :DONE 
     Port9 :DONE      Port10:DONE      Port11:DONE      Port12:DONE 
     Port13:DONE      Port14:DONE      Port15:DONE      Port16:DONE 
     Port17:DONE      Port18:DONE      Port19:DONE      Port20:DONE 
     Port21:DONE      Port22:DONE      Port23:DONE      Port24:DONE 
     Port25:DONE      Port26:DONE      Port27:DONE      Port28:DONE 
     Port29:DONE      Port30:DONE      Port31:DONE      Port32:DONE 
     Port33:DONE      Port34:DONE      Port35:DONE      Port36:DONE 
     Port37:DONE      Port38:DONE      Port39:DONE      Port40:DONE 
     Port41:DONE      Port42:DONE      Port43:DONE      Port44:DONE 
     Port45:DONE      Port46:DONE      Port47:DONE      Port48:DONE 

Slot 0/1: 
XPIF Version     : 0                     CAM size: 128 KB 
Ucode Version    : 1.0
Ucode Image      : XPIF_UCODE_RUNTIME
Port Phy Setup
     Port49:DONE      Port50:DONE 

IDPROM Contents        :
   FRU Type            : 0x0.0x0
   OEM String          : Cisco_Systems
   Product Number      : WS-C2948G-L3
   Serial Number       : FOX05330ADH
   Mfg. Assembly No.   : 73-4083-07
   Mfg. Assembly Ver.  : A0
   Hardware Version    : 1.7
   FPGA Version        : 0
   SNMP IOD            : 9.5.1.3.1.1.2.275
   RMA Code            : 0
   Feature Bits        : 0x00000000
   MAC Address Base    : 00:07:85:07:DC:00
   Total MAC Addrs.    : 1024

    Catalyst 9000

    Pour déterminer le numéro de série du châssis, utilisez la commande show version. Vous pouvez également utiliser la commande show module pour afficher une sortie plus petite :

    C9300#show version          
Cisco IOS XE Software, Version 17.06.04
Cisco IOS Software [Bengaluru], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 17.6.4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2022 by Cisco Systems, Inc.
Compiled Sun 14-Aug-22 08:58 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2022 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.  For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 17.8.1r[FC2], RELEASE SOFTWARE (P)

C9300 uptime is 1 week, 2 days, 17 hours, 51 minutes
Uptime for this control processor is 1 week, 2 days, 17 hours, 54 minutes
System returned to ROM by Reload Command at 07:14:20 jst Wed Aug 2 2023
System restarted at 07:29:56 jst Wed Aug 2 2023
System image file is "flash:packages.conf"
Last reload reason: Reload Command



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information: 

------------------------------------------------------------------------------
Technology-package                                     Technology-package
Current                        Type                       Next reboot  
------------------------------------------------------------------------------
network-advantage       Smart License                    network-advantage   
dna-advantage           Subscription Smart License       dna-advantage                 
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage


Smart Licensing Status: Registration Not Applicable/Not Applicable

cisco C9300-24UX (X86) processor with 1317097K/6147K bytes of memory.
Processor board ID FJC2325E0HB
5 Virtual Ethernet interfaces
8 Gigabit Ethernet interfaces
64 Ten Gigabit Ethernet interfaces
4 TwentyFive Gigabit Ethernet interfaces
4 Forty Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
1638400K bytes of Crash Files at crashinfo:.
11264000K bytes of Flash at flash:.

Base Ethernet MAC Address          : c4:c6:03:9a:bd:80
Motherboard Assembly Number        : 73-18276-03
Motherboard Serial Number          : FJZ23210BTF
Model Revision Number              : D0
Motherboard Revision Number        : B0
Model Number : C9300-24UX
System Serial Number : FJC2325E0HB
CLEI Code Number                   : 


Switch Ports Model              SW Version        SW Image              Mode   
------ ----- -----              ----------        ----------            ----   
*    1 41    C9300-24UX         17.06.04          CAT9K_IOSXE           INSTALL


    C9300#show module
Switch  Ports    Model                Serial No.   MAC address     Hw Ver.       Sw Ver. 
------  -----   ---------             -----------  --------------  -------       --------
 1       41     C9300-24UX            FJC2325E0HB  c4c6.039a.bd80  V02           17.06.04      
  

    Informations connexes

    Historique de révision

    Révision Date de publication Commentaires
    3.0
    29-Aug-2024
    Recertification
    1.0
    19-Mar-2003
    Première publication
    TAC Authored

    Contribution d’experts de Cisco

    • Ingénieurs TAC Cisco

    Ce document vous est-il utile?

    FeedbackCommentaires

    Contacter Cisco