Table des matières
Téléphone IP Cisco Unified 6961 (SCCP) pour
Cisco Unified Communications Manager Express Version 8.0Description des touches de fonction
Ajuster le volume de l'appel en cours
Ajuster le volume de la sonnerie
Ajuster le contraste de l'affichage
Activer le mode Muet pour un appel
Personnaliser la messagerie vocale
Consulter la messagerie vocale
Transférer un appel vers la messagerie vocale
Configurer les touches de numérotation rapide
Définir une notification de rappel
Afficher l'historique des appels
Établir une conférence téléphonique
Terminer une conférence téléphonique
Parquer et récupérer un appel à l'aide de la fonction Parquer
Établissement d'une conférence téléphonique MeetMe
Joindre ou quitter un groupe de recherche
Afficher les informations sur le téléphone
Index des fonctionnalités du téléphone
Guide de l'utilisateur
Téléphone IP Cisco Unified 6961 (SCCP) pour
Cisco Unified Communications Manager Express Version 8.0
1 Vue d'ensemble
Le présent guide explique comment utiliser le téléphone et décrit les fonctionnalités du téléphone IP multiligne Cisco modèle 6961. Le modèle 6961 dispose de douze lignes.
Description physique
Nom Description 1Combiné avec voyant lumineux
Fonctionne de la même manière qu'un combiné traditionnel et indique un appel entrant (lumière clignotante, de couleur rouge) ou un nouveau message vocal (lumière fixe, de couleur rouge).
2Écran LCD
Affiche des informations telles que l'état des appels entrants/sortants, les annuaires, l'état de la ligne, les options de configuration du téléphone et les titres des touches de fonction. Affiche aussi les étiquettes des lignes dédiées du téléphone.
3Touches de fonction
Selon la façon dont votre administrateur système a configuré le téléphone, les options de touches activées s'affichent à l'écran du téléphone.
4Bouton Transférer
Transfère les appels actifs vers un autre poste.
5Bouton Conférence
Lance la conférence téléphonique.
6Bouton Mise en attente
Place l'appel en attente.
7Barre de navigation et bouton de sélection (au centre)
La barre de navigation permet de faire défiler les informations vers le haut et vers le bas sur l'écran LCD. Elle vous permet de vous déplacer parmi les menus, de mettre des éléments en surbrillance et d'afficher la liste des numérotations rapides en appuyant vers le bas lorsque le combiné du téléphone est raccroché. Affichez les numéros de téléphone des appels passés en appuyant vers le haut lorsque le combiné du téléphone est raccroché.
8Bouton de ligne
Selon la configuration du téléphone, les touches programmables permettent d'accéder :
•aux lignes de téléphone et aux lignes d'interphone (touches de lignes) ;
•aux numéros abrégés (bouton de numérotation rapide, y compris les fonctions de numérotation rapide BLF) ;
•aux fonctionnalités du téléphone (par exemple, le bouton Confidentialité).
Les touches s'éclairent pour indiquer les états suivants :
•couleur verte, lumière fixe : appel actif, réponse à un appel ou appel interphone bidirectionnel ;
•couleur verte, lumière clignotante : appel mis en attente ;
•couleur orange, lumière fixe : option de confidentialité en cours d'utilisation, appel interphone unidirectionnel ou NPD actif ;
•couleur orange, lumière clignotante : appel entrant ou appel à un co-abonné ;
•couleur rouge, lumière clignotante : ligne distante en cours d'utilisation ou parquée ;
•couleur rouge, lumière clignotante : ligne distante en attente.
9Touche Casque
Permet d'activer ou de désactiver le mode casque. Lorsque le mode casque est activé, la touche est allumée.
10Bouton Haut-parleur
Permet d'activer ou de désactiver le mode Haut-parleur. Lorsque le mode haut-parleur est activé, la touche est allumée.
11Clavier de numérotation
Fonctionne comme un clavier de téléphone traditionnel.
12Bouton Muet
Permet d'activer ou de désactiver le mode Muet.
13Bouton Volume
Augmente ou réduit le volume du haut-parleur, de la sonnerie, du casque ou du combiné.
14Bouton Messages
Fournit l'accès au système de messagerie vocale.
15Bouton Application
Fournit l'accès aux paramètres du téléphone tels que l'historique des appels, les préférences utilisateur, la configuration du téléphone (y compris les paramètres d'administration, la configuration de l'appareil, la configuration du réseau et autres configurations habituelles) et les informations sur le modèle de téléphone.
16Bouton Contacts
Permet d'accéder aux répertoires téléphoniques.
17Combiné
Combiné du téléphone.
Écran du téléphone
1En-tête
Affiche la date, l'heure et le numéro du répertoire.
2Précisions concernant les lignes et autres informations relatives au téléphone
Pendant un appel, affiche des détails sur la ligne active. En dehors des appels, affiche l'étiquette de texte de la ligne et autres informations telles que les appels passés, les numérotations rapides et les listes de menus du téléphone.
3Étiquettes des touches de fonction
Affiche les touches de fonction pour les fonctionnalités ou actions disponibles.
Branchement du téléphone
Cette section illustre et décrit les connecteurs de votre téléphone IP Cisco Unified.
1Port de l'adaptateur CC (CC48V) pour les téléphones non alimentés directement
2Alimentation CA-à-CC
3Cordon d'alimentation CA
4Port réseau (10/100 SW) pour la connexion au réseau
5Port d'accès (10/100 PC) pour connecter le téléphone à votre ordinateur
6Port du combiné
7Port analogique du combiné
Support
Si le téléphone est placé sur une table ou un bureau, le support peut être branché à l'arrière du téléphone pour obtenir un angle de vue plus élevé ou plus bas, selon votre préférence.
Réglage du support du combiné
Lorsque vous branchez le téléphone, vous pouvez ajuster le support du combiné de manière à ce que le récepteur ne glisse pas hors du socle. Pour un téléphone monté sur un mur, vous devez ajuster le support du combiné de manière à assurer que le récepteur ne glisse pas hors du socle.
Pour ajuster le combiné :
1. Posez le combiné sur le côté et tirez vers le haut la plaquette en plastique carrée pour la retirer du support du combiné.
2. Faites pivoter la plaquette de 180 degrés. Maintenez la plaquette entre deux doigts, les petites encoches (dans les angles) face à vous. Assurez-vous que la plaquette s'aligne correctement sur le logement du socle.
3. Remettez la plaquette en place sur le support du combiné en la faisant glisser. Une extension fait saillie en haut de la plaquette qui a pivoté. Replacez le combiné sur son support.
2 Fonctionnement du téléphone
Cette section décrit comment faire fonctionner votre téléphone IP Cisco et comprend des informations sur les touches de fonction et les fonctionnalités du téléphone.
Remarque En mode Cisco Unified Communications Manager Express, le téléphone IP Cisco modèle 6961 ne prend en charge qu'un seul appel par touche. Il est recommandé de configurer le téléphone IP Cisco 6961 dn comme ligne double dn et le canal huntstop sous le dn. Le second canal du dn peut être utilisé seulement pour le renvoi d'appel et la conférence.
Remarque Comme les configurations de téléphones et de sites sont différentes, les fonctionnalités décrites ici ne s'appliqueront peut-être pas toutes à votre téléphone. Pour plus d'informations, contactez votre administrateur système.
Description des touches de fonction
Votre téléphone IP Cisco est équipé de touches de fonction pour les fonctionnalités et les options d'appel. Les touches de fonction sont situées le long de l'écran LCD et sont activées à l'aide des touches correspondantes. Elles peuvent changer en fonction de l'état du téléphone.
Remarque La disponibilité des touches programmables dépend de la configuration du système. La liste ci-dessous n'est pas exhaustive.
La liste ci-dessous indique toutes les touches de fonction présentes sur les téléphones IP Cisco. Les fonctions dépendent de la configuration du système.
Touche de fonction FonctionAll calls
Liste tous les appels.
Answer
Répond à un appel entrant
Backspace - <<X
Se déplace pour modifier des caractères. Utilisez la touche d'effacement arrière pour effacer des chiffres que vous avez entrés incorrectement.
Call
Ouvre une nouvelle ligne sur le haut-parleur pour faire un appel.
Callback
Prévient les appelants que la ligne appelée est libre.
Cancel
Annule la dernière sélection.
Clear
Efface l'historique de l'annuaire.
Call History
Fournit un historique des appels.
Conf
Connecte les appelants à une conférence téléphonique.
Details
Fournit des détails sur l'identité de l'appelant.
Delete
Supprime le numéro sélectionné.
Dial
Compose le numéro affiché.
EditDial
Sélectionne un numéro et active le curseur pour effectuer une modification.
EndCall
Termine l'appel en cours.
Exit
Quitte la sélection actuelle.
Fwd all
Fait suivre tous les appels.
Fwd Off
Désactive le transfert des appels.
Hold
Place un appel en attente. Reprend l'appel mis en attente.
Ignore
Revient à l'écran principal.
Missed
Liste tous les appels manqués.
More
Fait défiler les options supplémentaires des touches de fonction (par exemple, utilisez la touche de fonction more pour trouver la touche de fonction DnD).
New Call
Ouvre une nouvelle ligne sur le haut-parleur pour faire un appel.
Ok
Confirme la sélection.
Park
Transfère les appels vers un endroit dans lequel ils peuvent être récupérés par n'importe qui dans le système.
Redial
Recompose le dernier appel composé.
Remove
Retire le dernier participant de la conférence téléphonique.
Resume
Retourne à l'appel actif.
Swap
Passe d'un appel à un autre.
Search
Lance une recherche dans le répertoire local.
Transfer
Transfère l'appel actif.
TrnsVM
Transfère un appel vers la messagerie vocale
Update
Met à jour la liste des appelants.
Faire un appel
Pour faire un appel, utilisez l'une des méthodes suivantes :
•Soulevez le combiné et composez le numéro.
•Composez le numéro, puis soulevez le combiné.
•Composez le numéro, puis appuyez sur la touche de fonction Dial.
•Composez le numéro, puis appuyez sur le bouton Haut-parleur.
•Appuyez sur le bouton de ligne correspondant à votre poste, puis composez le numéro.
•Appuyez sur le bouton Haut-parleur, puis composez le numéro.
•Appuyez sur la touche de fonction New Call, puis composez le numéro.
•Si vous utilisez un casque, appuyez sur le bouton Casque, puis composez le numéro.
•Composez le numéro, puis appuyez sur le bouton Casque.
•Si vous avez défini des numéros à composition rapide, appuyez sur une touche de numérotation rapide.
•Si vous avez sélectionné un numéro dans un annuaire, appuyez sur la touche de fonction Call.
•Si vous avez sélectionné un numéro dans un annuaire, appuyez sur le bouton de ligne/Casque/Haut-parleur.
Remarque Utilisez la touche d'effacement arrière (<<X) pour effacer des chiffres que vous avez entrés incorrectement.
Répondre à un appel
Pour répondre à un appel :
•Soulevez le combiné.
•Si vous utilisez un casque, appuyez sur le bouton Casque. Au besoin, appuyez sur le bouton de ligne pour sélectionner les appels entrants.
•Si vous utilisez le haut-parleur, appuyez sur la touche de fonction Answer ou sur le bouton Haut-parleur.
Auto Answer
Le mode de Réponse automatique invite votre téléphone à répondre automatiquement aux appels entrants après une seule sonnerie.
L'administrateur système définit le mode Auto Answer de sorte à ce qu'il fonctionne avec le haut-parleur ou avec le casque.
•Gardez la touche du casque allumée lorsque le téléphone est inactif. Sinon, les appels sonnent normalement et vous devez y répondre manuellement.
•Pour garder la touche du casque allumée, utilisez un bouton de ligne ou les touches de fonction (au lieu de la touche du casque) pour décrocher et raccrocher le combiné et pour faire un appel ou terminer un appel.
•Laissez le combiné dans le socle et la touche du casque éteinte. Sinon, les appels sonnent normalement et vous devez y répondre manuellement.
Terminer un appel
Pour terminer un appel :
•Raccrochez le combiné.
•Si vous utilisez un casque, appuyez sur le bouton Casque ou sur la touche de fonction EndCall.
•Si vous utilisez un haut-parleur, appuyez sur la touche Speaker ou sur la touche de fonction EndCall.
Ajuster le volume de l'appel en cours
Pour ajuster le volume du casque, du haut-parleur ou du combiné pour l'appel en cours :
•Pendant un appel, appuyez sur + ou - sur le bouton VOLUME pour augmenter ou réduire le volume, respectivement.
Ajuster le volume de la sonnerie
•Appuyez sur la touche + ou - lorsque le combiné est sur son socle et que le téléphone est inactif.
Sélectionner la sonnerie
Pour changer de type de sonnerie :
1. Appuyez sur la touche Applications.
2. Sélectionnez Preferences. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez Ringtone.
4. Si le téléphone est configuré en mode multiligne, sélectionnez la ligne pour laquelle vous voulez changer la sonnerie.
5. Mettez un nom de sonnerie en surbrillance.
6. Appuyez sur la touche de fonction Play pour écouter un échantillon de la sonnerie.
7. Appuyez sur la touche de fonction Set pour sélectionner la sonnerie.
8. Appuyez sur la touche de fonction Apply pour confirmer votre sélection ou sur Cancel pour retourner à l'écran des sonneries.
9. Appuyez sur la touche de fonction Back pour retourner à l'écran des préférences.
Remarque Vous pouvez définir des sonneries distinctes pour chaque ligne en appuyant sur le bouton de ligne. Vous pouvez aussi définir des sonneries distinctes pour chaque numéro lorsque le téléphone a plusieurs numéros.
Ajuster le contraste de l'affichage
Le niveau de contraste par défaut est défini à 50 %. Pour ajuster le contraste de l'affichage LCD :
1. Appuyez sur le bouton Applications.
2. Sélectionnez Preferences. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez Contrast.
4. Pour augmenter le contraste, appuyez sur la flèche montante du bouton de navigation. Pour réduire le contraste, appuyez sur la flèche descendante.
•Appuyez sur la touche de fonction Save pour définir le niveau du contraste ou sur Cancel pour quitter.
Recomposer un numéro
Pour recomposer le dernier numéro appelé :
•Soulevez le combiné et appuyez sur la touche de fonction Redial.
•Appuyez sur la touche de fonction Redial pour composer un numéro lorsque vous utilisez le haut-parleur ou le casque.
Mettre un appel en attente
Pour mettre un appel en attente lorsqu'il est en cours :
•Pour mettre un appel en attente, appuyez sur le bouton de mise en attente .
Pour reprendre un appel mis en attente :
•Pour reprendre l'appel, appuyez sur la touche de fonction Resume ou sur la touche de la ligne dont le voyant vert clignote.
•Si votre téléphone prend en charge plusieurs lignes, vous pouvez utiliser les touches des lignes pour passer d'un appel en attente à un appel actif et vice-versa.
Par exemple, si un appel est en attente sur la ligne 1 et qu'un appel actif se trouve sur la ligne 2, l'appel de la ligne 1 devient actif lorsque vous appuyez sur la touche de la ligne (il est repris alors qu'il était en attente) et l'appel de la ligne 2 est automatiquement mis en attente.
Gérer un appel en attente
Si vous êtes en communication téléphonique lorsque vous recevez un autre appel, vous entendez une tonalité signalant l'appel ou vous voyez un voyant lumineux qui se met à clignoter sur le socle du combiné, selon la configuration de votre téléphone.
Pour répondre à un nouvel appel sur la même ligne :
1. Utilisez la touche de fonction Swap pour passer d'un appel à un autre ou appuyez sur la touche de la ligne pour passer à l'autre appel.
2. Appuyez sur la touche de fonction Answer pour répondre à l'appel L'appel est automatiquement mis en attente sur l'autre ligne.
Par exemple, si un appel est en attente sur la ligne 1 et qu'un appel actif se trouve sur la ligne 2, l'appel de la ligne 1 devient actif lorsque vous appuyez sur la touche de la ligne (il est repris alors qu'il était en attente) et l'appel de la ligne 2 est automatiquement mis en attente.
Pour retourner à l'appel initial :
1. Utilisez la touche de fonction Swap pour sélectionner de nouveau l'appel.
2. Appuyez sur la touche de fonction Resume pour reprendre l'appel.
Remarque Les appels laissés sans réponse sont acheminés vers votre système de messagerie vocale (le cas échéant).
Activer le mode Muet pour un appel
Pour passer en mode muet pendant un appel :
•Pendant l'appel, appuyez sur le bouton Muet . Le bouton Muet s'allume, indiquant que l'autre personne ne peut pas vous entendre.
Pour désactiver le mode muet, effectuer l'une des actions suivantes :
•Appuyez de nouveau sur le bouton Muet.
•Décrochez le combiné si vous utilisez le mode muet avec le haut-parleur.
Remarque La fonction Muet ne génère pas de musique, ni de tonalité.
Personnaliser la messagerie vocale
Appuyez sur la touche Messages , puis suivez les invites vocales.
Consulter la messagerie vocale
Consultez la messagerie vocale de l'une des manières suivantes :
•Examinez, sur le combiné, le voyant indiquant la présence de messages vocaux.
Vous pouvez configurer le voyant indiquant la présence de messages vocaux par le biais des pages Web relatives aux options de l'utilisateur.
•Écoutez si votre combiné, casque ou haut-parleur émet une tonalité saccadée lorsque vous faites un appel.
La tonalité saccadée est spécifique à la ligne. Vous l'entendrez seulement lorsque vous utilisez la ligne sur laquelle le message attend.
Vous pouvez configurer l'indicateur audible indiquant la présence d'un message par le biais des pages Web relatives aux options de l'utilisateur.
Écouter les messages vocaux
Deux méthodes sont disponibles pour écouter les messages vocaux :
•Appuyez sur le bouton Messages pour écouter les messages vocaux laissés sur n'importe quelle ligne.
•Appuyez sur un bouton de ligne, puis sur Messages pour entendre seulement les messages vocaux laissés sur cette ligne.
Récupérer les messages vocaux
Pour récupérer les messages vocaux :
•Appuyez sur le bouton Messages pour écouter les messages vocaux laissés sur n'importe quelle ligne.
•Appuyez sur un bouton de ligne, puis sur Messages pour entendre seulement les messages vocaux laissés sur cette ligne.
Remarque Lorsque vous avez un ou plusieurs nouveaux messages, le voyant indiquant la présence de messages est allumé sur le combiné. Ce voyant lumineux ne fonctionne que lorsqu'il a été configuré sur le téléphone.
Transférer un appel vers la messagerie vocale
•Appuyez sur la touche de fonction TrnsVM.
Faire suivre tous les appels
Pour faire suivre tous les appels vers un autre numéro :
1. Appuyez sur la touche de fonction Fwd All. Vous entendrez un bip de confirmation.
2. Entrez le numéro vers lequel vous souhaitez faire suivre tous vos appels. Composez le numéro exactement comme si vous appeliez ce numéro. Pensez à inclure les indicatifs requis localement.
L'affichage du téléphone est mis à jour de sorte à indiquer que ces appels sont transférés.
3. Pour annuler le transfert des messages, appuyez sur la touche de fonction Fwd OFF.
Applications du téléphone
Les applications du téléphone vous permettent d'accéder aux fonctionnalités suivantes :
•Historique des appels
•Préférences
•Services
•Informations téléphoniques
•Paramètres de l'administrateur (réservé aux administrateurs système)
Configurer les touches de numérotation rapide
Les fonctionnalités de numérotation rapide permettent de faire un appel en appuyant sur un bouton de ligne ou en sélectionnant un élément de l'affichage. Vous pouvez définir les numéros à composition rapide par le biais des pages Web relatives aux options de l'utilisateur.
1. Ouvrez une session sur les pages Web relatives aux options d'utilisateur.
2. Sélectionnez User Options > Device.
3. Choisissez un téléphone dans le menu déroulant Name.
4. Cliquez sur Speed Dials.
5. Dans la zone Speed Dial Settings, entrez un numéro et une étiquette pour le bouton de numérotation rapide (touche programmable) de votre téléphone.
6. Cliquez sur Save.
Numérotation rapide
Une fois qu'un administrateur a défini un ou plusieurs numéros rapides sur un téléphone IP Cisco, vous pouvez définir les codes dans les pages Web relatives aux options d'utilisateur :
Selon sa configuration, le téléphone peut prendre en charge les fonctions de numérotation rapide suivantes :
•Touches de numérotation rapide : Elles permettent de composer rapidement un numéro de téléphone à l'aide d'une ou plusieurs boutons de ligne programmées pour la numérotation rapide.
•Codes de numérotation rapide : Ils permettent de composer un numéro de téléphone à l'aide d'un code (quelquefois appelé numérotation rapide).
Bouton de numérotation rapide
Pour faire un appel lorsque le combiné de votre téléphone est raccroché :
•Entrez le code de numérotation rapide pré-configuré et appuyez sur la touche de fonction SpeedDial.
Pour faire un appel lorsque le combiné de votre téléphone est décroché :
•Appuyez sur la touche de fonction SpeedDial.
•Entrez le code de numérotation rapide pré-configuré et appuyez sur la touche de fonction SpeedDial.
Définir une notification de rappel
1. Appuyez sur la touche de fonction Callback pendant que vous écoutez la tonalité de ligne occupée ou la sonnerie.
2. Un écran de confirmation s'affiche sur le téléphone.
3. Appuyez sur la touche de fonction Exit pour retourner à l'écran principal, si nécessaire.
4. Le téléphone vous avertit lorsque la ligne s'est libérée.
5. Appuyez sur la touche de fonction Redial pour passer de nouveau l'appel, si nécessaire.
Annuaire téléphonique
Le téléphone IP Cisco Unified 6900 vous fournit l'accès à vos contacts professionnels et personnels.
Rechercher un contact et l'appeler
1. Appuyez sur le bouton Contacts .
2. Appuyez sur 1 pour mettre en surbrillance Personal Directory ou sur 2 mettre en surbrillance Corporate Directory, puis appuyez sur le bouton de Select.
3. Pour accéder à l'annuaire personnel, entrez l'ID utilisateur et le code PIN. Appuyez sur la touche de fonction Submit, ou sur Cancel pour quitter.
4. Pour accéder à l'annuaire professionnel, utilisez la barre de navigation pour sélectionner l'un des critères suivants pour rechercher un collègue :
–First name (pour rechercher par prénom)
–Last name (pour rechercher par nom)
–Number (pour rechercher par numéro)
5. Utilisez le clavier pour entrer les informations, puis appuyez sur la touche de fonction Search.
6. Pour composer le numéro, effectuez l'une de ces tâches :
–Appuyez sur la touche de fonction Call.
–Appuyez sur le bouton de Select de la barre de Navigation.
–Appuyez sur un bouton de ligne.
–Appuyez sur le bouton Speakerphone .
–Appuyez sur la touche Headset .
–Décrochez le combiné.
Rechercher un contact et composer son numéro pendant un appel
1. Appuyez sur le bouton Contacts .
2. Appuyez sur la touche de fonction Personal Directory ou Corporate Directory, puis sur le bouton de sélection.
3. Pour accéder à l'annuaire personnel, entrez l'ID utilisateur et le code PIN, appuyez sur la touche de fonction Submit, ou sur Cancel pour quitter.
4. Pour accéder à l'annuaire professionnel, sélectionnez l'un des critères suivants pour rechercher un collègue :
–First name (pour rechercher par prénom)
–Last name (pour rechercher par nom)
–Number (pour rechercher par numéro)
5. Entrez les informations, puis sélectionnez Search > Dial.
Afficher l'historique des appels
1. Appuyez sur la touche Applications.
2. Sélectionnez Call History. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez All Lines ou seulement la ligne que vous voulez visualiser.
4. Appuyez sur la touche de fonction Exit pour retourner à l'écran Call History.
Visualiser les informations sur les enregistrements d'appels
1. Appuyez sur la touche Applications.
2. Sélectionnez Call History. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez All Lines ou seulement la ligne que vous voulez visualiser.
4. Sélectionnez un enregistrement d'appel et appuyez sur la touche de fonction Details (vous devrez peut-être appuyer d'abord sur la touche more).
5. Appuyez sur la touche de fonction Back pour retourner à l'écran Call History.
Filtrer l'historique des appels
1. Appuyez sur la touche Applications.
2. Sélectionnez Call History. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez All Lines ou seulement la ligne que vous voulez visualiser.
4. Appuyez sur la touche de fonction Missed.
L'écran Call History affiche seulement les appels manqués de la ligne sélectionnée.
5. Pour visualiser tous les appels dans l'écran Call History, appuyez sur la touche de fonction All Calls.
6. Appuyez sur la touche de fonction Exit pour retourner à l'écran Call History.
Faire un appel à partir de l'historique des appels
1. Appuyez sur la touche Applications.
2. Sélectionnez Call History. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez All Lines ou seulement la ligne que vous voulez visualiser.
4. Dans l'écran Call History, mettez en surbrillance le numéro que vous voulez composer et effectuez l'une des actions suivantes :
–Appuyez sur la touche de fonction Call.
–Appuyez sur le bouton de ligne.
–Décrochez le combiné.
–Appuyez sur la touche du haut-parleur ou du casque.
Modifier le numéro dans l'historique des appels
1. Appuyez sur la touche Applications.
2. Sélectionnez Call History. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez All Lines ou seulement la ligne que vous voulez visualiser.
4. Mettez en surbrillance l'appel dont vous voulez modifier le numéro.
5. Appuyez sur la touche de fonction EditDial (vous devrez peut-être appuyer d'abord sur la touche more).
6. Appuyez sur la touche de fonction Forward Arrow pour déplacer le curseur vers la droite et Backward Arrow pour déplacer le curseur vers la gauche.
7. Appuyez sur la touche de fonction Back Delete pour supprimer des chiffres.
8. Appuyez sur la touche de fonction Dial pour composer le numéro modifié.
9. Appuyez sur la touche de fonction Back pour retourner à l'écran Call History.
Effacer l'historique des appels
1. Appuyez sur la touche Applications.
2. Sélectionnez Call History. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez All Lines ou seulement la ligne que vous voulez visualiser.
4. Appuyez sur la touche de fonction Delete (vous devrez peut-être appuyer d'abord sur la touche more).
5. Appuyez sur la touche de fonction Delete pour supprimer le contenu de l'écran Historique des appels ou sur Cancel pour retourner à l'écran Call History.
Supprimer un enregistrement d'appel dans l'historique des appels
1. Appuyez sur la touche Applications.
2. Sélectionnez Call History. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Sélectionnez All Lines ou seulement la ligne que vous voulez visualiser.
4. Mettez en surbrillance l'appel que vous voulez supprimer.
5. Appuyez sur la touche de fonction Del Call (vous devrez peut-être appuyer d'abord sur la touche more).
6. Appuyez sur la touche de fonction Delete pour supprimer l'appel ou sur Cancel pour retourner à
l'écran Call History.Transférer un appel
Pour transférer un appel sélectionné vers un autre numéro, vous pouvez utiliser le transfert direct ou consultatif :
Transfert aveugle
Redirige immédiatement l'appel sans vous permettre de parler au destinataire du transfert (la personne à qui vous transférez l'appel).
Pour effectuer un transfert direct :
1. Au cours d'un appel, appuyez sur le bouton Transfer . L'appel est mis en attente.
2. Composez le numéro vers lequel vous souhaitez transférer l'appel.
3. Appuyez de nouveau sur le bouton Transfer .
Transfert consultatif
Redirige l'appel après vous avoir permis de parler au destinataire du transfert.
Pour effectuer un transfert consultatif :
1. Au cours d'un appel, appuyez sur le bouton Transfer . L'appel est mis en attente.
2. Composez le numéro vers lequel vous souhaitez transférer l'appel.
3. Attendez d'obtenir une réponse à votre appel. Parlez au destinataire du transfert. Ensuite, appuyez sur le bouton Transfer ou raccrochez le combiné.
4. Si le transfert échoue, appuyez sur la touche de fonction Resume pour revenir à l'appel initial.
Annuler un transfert
1. Pour annuler votre tentative de transfert consultatif :
–Appuyez sur la touche de fonction Cancel.
Remarque En mode Cisco Unified Communications Manager Express, le téléphone IP Cisco modèle 6961 ne prend en charge qu'un seul appel par touche. Il est recommandé de configurer le téléphone IP Cisco 6961 dn comme ligne double dn et le canal huntstop sous le dn. Le second canal du dn peut être utilisé seulement pour le renvoi d'appels et la conférence.
Établir une conférence téléphonique
Pour créer une conférence téléphonique à trois :
1. Pendant un appel, appuyez sur le bouton Conference pour ouvrir une nouvelle ligne et mettre la première personne en attente.
2. Composez un autre numéro.
3. Appuyez de nouveau sur le bouton Conference pour ajouter la nouvelle personne à l'appel.
Pour établir une conférence téléphonique entre deux et trois personnes sur un téléphone IP Cisco Unified, l'une étant active et l'autre étant en attente :
•Appuyez sur le bouton Conference de votre téléphone IP Cisco Unified.
Remarque L'administrateur système doit avoir configuré le système pour permettre les conférences téléphoniques ad-hoc entre trois ou huit personnes.
Terminer une conférence téléphonique
Pour terminer une conférence téléphonique :
•Raccrochez le combiné ou appuyez sur la touche de fonction Cancel.
Remarque Selon la configuration en vigueur lorsque l'initiateur de la conférence téléphonique raccroche, la conférence téléphonique se termine.
Méthodes alternatives pour terminer une conférence téléphonique
Les initiateurs de la conférence téléphonique peuvent suivre l'une des méthodes ci-dessous (les fonctionnalités varient selon la configuration de votre système) :
•Pour terminer une conférence téléphonique tout en restant connecté à l'appel le plus récent, appuyez sur la touche de fonction Conf. Le premier appel est mis en attente.
•Pour vous déconnecter d'une conférence téléphonique, raccrochez le combiné. Les autres personnes continueront à participer à la conférence téléphonique.
Parquer et récupérer un appel à l'aide de la fonction Parquer
La fonction de parcage des appels permet aux utilisateurs de mettre un appel en attente à un endroit de parcage désigné, à partir duquel l'appel peut être récupéré par n'importe qui dans le système.
Remarque Contactez l'administrateur système pour obtenir le numéro d'emplacement de parcage des appels.
Pour parquer un appel puis le récupérer :
1. Pendant un appel, appuyez sur la touche de fonction Park, puis raccrochez.
Pour la durée de l'appel, votre téléphone affiche le numéro d'emplacement de parcage où l'appel a été stocké par le système.
2. Récupérez l'appel à partir de tout autre téléphone IP Cisco Unified de votre réseau en entrant le numéro de parcage de l'appel.
Si vous ne récupérez pas l'appel dans un certain délai (défini par l'administrateur système), une tonalité se fera entendre sur le téléphone pour vous rappeler l'appel parqué ; vous pouvez alors reprendre l'appel en appuyant sur la touche de fonction Resume ou en le récupérant à partir d'un autre téléphone.
Si vous ne récupérez ni ne reprenez l'appel dans un délai spécifique (défini par l'administrateur système) après avoir entendu la tonalité vous rappelant l'appel parqué, l'appel sera envoyé à une autre destination (définie par l'administrateur système), par exemple une messagerie vocale.
Parquer un appel à l'aide du parcage assisté d'appels dirigés
Pour parquer un appel à un emplacement de parcage d'appels dirigés :
1. Au cours d'un appel, appuyez sur le bouton Transfer .
2. Appuyez sur le bouton de ligne Directed Call Park.
3. Appuyez de nouveau sur le bouton Transfer .
Vous disposez d'un délai limité pour récupérer l'appel parqué avant qu'il ne recommence à sonner au numéro initial.
Pour récupérer un appel parqué à un emplacement de parcage d'appels dirigés :
•Composez le numéro de poste de l'emplacement de parcage.
•Composez le numéro de l'appel dirigé.
Par exemple, si l'indicatif de récupération du parcage est « 77 » et que le numéro de l'appel dirigé est « 6789 », entrez 776789.
Parquer et récupérer un appel à l'aide du parcage manuel d'appels dirigés
1. Au cours d'un appel, appuyez sur le bouton Transfer .
2. Entrez le numéro de l'appel dirigé où vous voulez parquer l'appel.
3. Appuyez de nouveau sur Transfer pour finir de parquer l'appel, puis raccrochez.
Vous disposez d'un délai limité pour récupérer l'appel parqué avant qu'il ne recommence à sonner au numéro initial.
4. Récupérez l'appel à partir de tout autre téléphone IP Cisco Unified de votre réseau de la manière suivante :
–Composez le numéro de poste de l'emplacement de parcage.
–Composez le numéro de l'appel dirigé.
Par exemple, si l'indicatif de récupération du parcage est « 77 » et que le numéro de l'appel dirigé est « 6789 », entrez 776789.
Lignes partagées
Les lignes partagées vous permettent d'utiliser un seul numéro de téléphone avec plusieurs téléphones.
Il est plus pratique d'avoir une ligne partagée si vous utilisez plusieurs téléphones mais que vous voulez avoir un seul numéro, partagez des tâches de gestion des appels avec des collègues ou gérez les appels destinés à un chef de service.
Par exemple, si vous partagez une ligne avec un collègue :
•Lorsqu'un appel arrive sur la ligne partagée :
–Votre téléphone sonne, le voyant du bouton de ligne clignote et prend la couleur orange.
–Le téléphone de votre collègue sonne, le voyant du bouton de ligne clignote et prend la couleur orange.
•Si vous répondez à l'appel :
–Le voyant de la touche de votre ligne devient vert.
–Le voyant de la touche de la ligne de votre collègue devient rouge.
Lorsque le voyant de la touche est rouge, cette ligne ne peut pas être utilisée pour s'immiscer dans l'appel ou pour faire un autre appel.
•Si vous mettez l'appel en attente :
–Le voyant de la touche de votre ligne clignote et devient vert.
–Le voyant de la touche de la ligne de votre collègue clignote et devient rouge.
•Lorsque le voyant de la touche de la ligne clignote et est de couleur rouge, votre collègue peut prendre l'appel.
Services d'accès
1. Appuyez sur la touche Applications.
2. Sélectionnez Services. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Mettez en surbrillance le service que vous voulez accéder.
4. Appuyez sur la touche de fonction Select, ou sur Exit pour retourner à l'écran Applications.
Établissement d'une conférence téléphonique MeetMe
Pour faire un appel de conférence téléphonique MeetMe :
1. Obtenez le numéro de conférence téléphonique MeetMe auprès de l'administrateur système.
2. Distribuez ce numéro à tous les participants.
3. Raccrochez, appuyez sur la touche de fonction MeetMe, puis composez le numéro de conférence téléphonique MeetMe. Tous les autres participants se joignent à la conférence en composant le numéro de conférence téléphonique MeetMe.
4. Pour mettre fin à la conférence téléphonique rendez-vous, tous les participants doivent raccrocher le combiné ou appuyer sur la touche de fonction Cancel.
Joindre ou quitter un groupe de recherche
1. Appuyez sur le bouton de ligne Hunt Group pour vous joindre au groupe.
Une confirmation visuelle s'affiche brièvement.
2. Appuyez de nouveau sur Hunt Group pour quitter le groupe.
Le fait de se déconnecter d'un groupe de recherche n'empêche pas les appels d'autres groupes de sonner sur votre téléphone.
Prise d'appels
La fonction de prise d'appels vous permet de répondre à un appel qui sonne sur le téléphone d'un collègue en redirigeant l'appel vers votre téléphone
Vous pouvez utiliser la fonction de prise d'appels si vous partagez la gestion des appels avec des collègues.
Trois méthodes sont disponibles pour intercepter un appel :
•Pickup : Vous permet de répondre à un appel qui sonne sur le téléphone d'une autre personne de votre groupe de prise d'appels.
Si plusieurs appels doivent être interceptés, votre téléphone prend d'abord le premier appel (c'est-à-dire celui qui sonne depuis le plus longtemps).
•Group Pickup : Vous permet de répondre à un appel sur un téléphone situé en dehors de votre groupe de prise d'appels :
–en utilisant un numéro de prise d'appels de groupe (fourni par votre administrateur système) ;
–en composant le numéro du téléphone qui sonne.
L'administrateur système définit le groupe de prise d'appels dans lequel vous vous trouvez et les touches de fonction de prise d'appels, selon vos besoins en termes de gestion des appels et votre environnement de travail.
Remarque L'administrateur système peut aussi changer la fonction de la touche de prise d'appels de façon à ce qu'elle fonctionne comme prise d'appels dirigée d'un poste spécifique plutôt que d'une prise d'appels de groupe local. Dans cette configuration, les appels venant d'un groupe local peuvent être pris en appuyant sur la touche GPickUp puis sur la touche étoile.
Répondre à un appel à l'aide de la fonction de prise d'appels
1. Appuyez sur la touche de fonction PickUp pour transférer à votre téléphone un appel entrant sur un téléphone faisant partie du groupe de prise d'appels.
Si vous avez plusieurs lignes et que vous voulez prendre l'appel sur une ligne secondaire, appuyez sur le bouton de ligne souhaitée, puis sur la touche de fonction PickUp.
Si votre téléphone prend en charge la prise d'appels automatique, vous êtes connecté automatiquement à l'appel.
Si le téléphone sonne, appuyez sur la touche de fonction Answer pour répondre à l'appel.
Afficher les informations sur le téléphone
1. Appuyez sur la touche Applications.
2. Sélectionnez Phone Information. (Utilisez la barre de navigation et le bouton de sélection pour faire défiler et choisir.)
3. Appuyez sur la touche de fonction Exit pour retourner à l'écran Applications.
3 Index des fonctionnalités du téléphone
Cette section fournit une liste alphabétique des fonctionnalités des téléphones IP Cisco Unified. Ces fonctionnalités sont prises en charge par les protocoles SCCP.
Tableau 1 Fonctionnalités (avec références aux numéros des pages) prises en charge par les protocoles SCCP.
FonctionnalitésParquer et récupérer un appel à l'aide de la fonction Parquer
Rechercher un contact et composer son numéro pendant un appel
Cisco et le logo Cisco sont des marques déposées de Cisco Systems, Inc. et/ou de ses filiales aux États-Unis et dans d'autres pays. Vous trouverez une liste des marques commerciales de Cisco sur la page Web www.cisco.com/go/trademarks. Les autres marques commerciales mentionnées dans les présentes sont la propriété de leurs détenteurs respectifs. L'utilisation du terme « partenaire » n'implique pas de relation de partenariat entre Cisco et toute autre entreprise. (1005R)
Copyright © 2010 Cisco Systems, Inc. Tous droits réservés.