Bilanciamento del carico e failover L2TP

Opzioni per il download

PDF (172.3 KB)
Visualizza con Adobe Reader su diversi dispositivi
ePub (113.3 KB)
Visualizza in diverse app su iPhone, iPad, Android, Sony Reader o Windows Phone
Mobi (Kindle) (254.2 KB)
Visualizza su dispositivo Kindle o tramite app Kindle su più dispositivi

Aggiornato:9 settembre 2005

ID documento:23981

Linguaggio senza pregiudizi

La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.

Informazioni su questa traduzione

Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).

Sommario

Introduzione

Prerequisiti

Requisiti

Componenti usati

Convenzioni

Load balancing LNS

Failover LNS

Bilanciamento del carico e failover LNS

Test di laboratorio

Load balancing LNS con coppie di attributi/valori specifiche del fornitore Cisco

LAC - Configurazione

LNS - Configurazione

Debug eseguiti da LAC

Failover LNS con coppie di attributi/valori specifiche del fornitore Cisco

Bilanciamento del carico e failover LNS con coppie di attributi/valori specifiche del fornitore Cisco

Informazioni correlate

Introduzione

Questo documento spiega le funzionalità di un L2TP access concentrator (LAC) che esegue funzioni di bilanciamento del carico e failover su più server di rete L2TP (LNS).

Prerequisiti

Requisiti

Nessun requisito specifico previsto per questo documento.

Componenti usati

Il documento può essere consultato per tutte le versioni software o hardware.

Convenzioni

Per ulteriori informazioni sulle convenzioni usate, consultare il documento Cisco sulle convenzioni nei suggerimenti tecnici.

Load balancing LNS

Quando si utilizza RADIUS per inviare le informazioni del tunnel VPDN (Virtual Private Dial-up Network) a un LAC, è possibile inoltrare gli utenti dello stesso DNIS (Dial-Number Identification Service) o dominio a più LAN. Questo è un requisito quando i tunnel e le sessioni in entrata devono essere condivisi su più LAN per facilitare la distribuzione del carico e offrire livelli più elevati di ridondanza. Per abilitare la funzione di bilanciamento del carico, gli indirizzi IP di ciascuna rete LAN disponibile come endpoint del tunnel devono essere recapitati nella coppia attributo/valore Cisco specifico del fornitore (VSA).

Cisco:Avpair = "vpdn:ip-addresses=10.51.6.82,10.51.6.59"

Il carattere ',' viene utilizzato come delimitatore per indicare che esistono più endpoint disponibili per il LAC. È inoltre possibile utilizzare uno spazio come delimitatore per indicare la stessa priorità degli endpoint del tunnel. Il LAC seleziona l'endpoint da utilizzare in base alla selezione casuale del primo indirizzo IP non attivo consegnato. Se è occupato (il LAC non può connettersi all'indirizzo IP), viene selezionato l'indirizzo IP successivo. Se non sono disponibili indirizzi IP non attivi, la selezione successiva si basa su un indirizzo IP in 'stato tunnel aperto' e infine su un indirizzo IP in 'stato tunnel in sospeso'.

Failover LNS

Il software Cisco IOS® consente un massimo di sei livelli di priorità quando si utilizzano più LAN. Utilizzando il delimitatore '/', è possibile assegnare diversi gruppi di priorità alle linee LNS scaricate nel LAC. In questo modo, alcuni LNS possono funzionare come LNS primari e altri come backup. Come in precedenza, gli endpoint del tunnel vengono forniti nella coppia attributo/valore Cisco VSA.

Cisco:Avpair = "vpdn:ip-addresses=10.51.6.82/10.51.6.59"

Il delimitatore '/' indica che 10.51.6.82 è nel gruppo di priorità 1 e 10.51.6.59 nel gruppo di priorità 2.

Bilanciamento del carico e failover LNS

È possibile utilizzare sia il bilanciamento del carico che il failover nello stesso profilo. A tal fine, è possibile usare la coppia attributo/valore "vpdn:ip-address" di Cisco VSA, come mostrato di seguito:

Cisco:Avpair = "vpdn:ip-addresses=
1.1.1.1,2.2.2.2/3.3.3.3,4.4.4.4/5.5.5.5,6.6.6.6"

Tale espressione è interpretata come segue:

gli endpoint del tunnel 1.1.1.1 e 2.2.2.2 si trovano nel gruppo di priorità 1
gli endpoint del tunnel 3.3.3.3 e 4.4.4.4 si trovano nel gruppo di priorità 2
gli endpoint del tunnel 5.5.5.5 e 6.6.6.6 si trovano nel gruppo di priorità 3

La funzione di bilanciamento del carico viene eseguita sul gruppo di priorità 1 - non attivo/non occupato, aperto, in sospeso. Se a questo livello di priorità non sono disponibili risorse, passare al livello di priorità successivo e continuare la logica di selezione.

Test di laboratorio

Il test di questa sezione mostra tre diversi scenari per l'utilizzo delle funzionalità di bilanciamento del carico e failover:

Bilanciamento del carico LNS con coppie attributo/valore specifiche del fornitore Cisco
Failover LNS con coppie attributo/valore specifiche del fornitore Cisco
Bilanciamento del carico e failover LNS utilizzando coppie attributo/valore specifiche del fornitore Cisco

Load balancing LNS con coppie di attributi/valori specifiche del fornitore Cisco

Profilo RADIUS

Profili utente e tunnel RADIUS su server RADIUS Merit 3.6B:

2500-1 Password = "cisco" 
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.255

dnis:614629 Password = "cisco"
Service-Type = Outbound,
Cisco:Avpair = "vpdn:tunnel-type=l2tp",
Cisco:Avpair = "vpdn:tunnel-id=hgw",
Cisco:Avpair = "vpdn:ip-addresses=10.51.6.82,10.51.6.59",
Cisco:Avpair = "vpdn:l2tp-tunnel-password=hello"

LAC - Configurazione

aaa new-model

!--- Enables Authentication, Authorization and Accounting functionality.

aaa group server radius NSA_LAB
server 10.51.6.3 auth-port 1645 acct-port 0 non-standard
!
aaa authentication login default local
aaa authentication ppp default local group NSA_LAB
aaa authentication ppp DIAL group NSA_LAB local
aaa authorization network default group NSA_LAB local
aaa authorization network DIAL group NSA_LAB local

!--- Authentication and Authorization will be implemented !--- in sequence by the methods configured.

vpdn enable

!--- Enables the VPDN feature.

no vpdn logging
vpdn search-order dnis

!--- Once LCP state is open, the dialed number is checked !--- to see if the remote is a VPDN user.

interface Serial0:15
no ip address
encapsulation ppp
no logging event link-status
dialer rotary-group 1
dialer-group 1
autodetect encapsulation ppp v120
no snmp trap link-status
isdn switch-type primary-net5
isdn incoming-voice modem
compress stac
!
interface Dialer1
ip unnumbered Loopback0
encapsulation ppp
no ip mroute-cache
dialer-group 1
autodetect encapsulation ppp v120

!--- Allows the encapsulation type to be dynamically set if the call !--- type is not identified in the ISDN Q.931 Lower Layer Compatibility.

peer default ip address pool default
compress stac
ppp authentication chap pap DIAL
ppp authorization DIAL

!--- The list-name DIAL is configured, that PPP Authentication and !--- Authorization will use.

ppp chap hostname 5300-1

!--- The name 5300-1 is used for all CHAP challenge and response on !--- this interface.

ppp multilink
!
radius-server host 10.51.6.3 auth-port 1645 acct-port 1646 non-standard

!--- 'non-standard' indicates that the RADIUS Server will use !--- non standard RADIUS attributes.

LNS - Configurazione

aaa new-model

!--- Enables Authentication, Authorization and Accounting functionality.

aaa authentication login default local
aaa authentication enable default group radius enable
aaa authentication ppp default local
aaa authentication ppp vpdn group radius none
aaa authorization network default local none
aaa authorization network vpdn group radius local

!--- Authentication and Authorization will be implemented !--- in sequence by the methods configured.

vpdn enable

!--- Enables the VPDN feature.

vpdn-group 1
accept-dialin
protocol l2tp
virtual-template 1
local name l2tp-gw
l2tp tunnel password 7 1211001B1E04

!--- The LNS will accept connections from the LAC using L2TP !--- using All Virtual-Access Interfaces that are created will be cloned from !--- Virtual-Template 1. The name 'l2tp-gw' is used to identify the password, !--- that will authenticate the tunnel, is encrypted.

interface Ethernet5/0
ip address 10.51.6.59 255.255.252.0
!
interface Virtual-Template1
ip unnumbered Ethernet5/0
no ip route-cache cef
peer default ip address pool default
ppp authentication chap vpdn
ppp authorization vpdn
!
radius-server host 10.51.6.3 auth-port 1645 acct-port 1646 non-standard

!--- 'non-standard' identifies the RADIUS Server will be !--- using nonstandard RADIUS attributes.

Debug eseguiti da LAC

Jan 1 00:32:54.847: %LINK-3-UPDOWN: Interface Serial0:0, changed state to up
Jan 1 00:32:55.027: Se0:0 PPP: Treating connection as a callin
Jan 1 00:32:55.027: Se0:0 PPP: Phase is ESTABLISHING, Passive Open
Jan 1 00:32:55.027: Se0:0 CHAP: Using alternate hostname 5300-1
Jan 1 00:32:55.027: Se0:0 LCP: State is Listen
Jan 1 00:32:55.027: Se0:0 LCP: I CONFREQ [Listen] id 112 len 10
- snip -
Jan 1 00:32:55.063: Se0:0 LCP: State is Open
Jan 1 00:32:55.063: Se0:0 PPP: Phase is AUTHENTICATING, by this end
Jan 1 00:32:55.063: Se0:0 CHAP: Using alternate hostname 5300-1
Jan 1 00:32:55.063: Se0:0 CHAP: O CHALLENGE id 14 len 27 from "5300-1"
Jan 1 00:32:55.083: Se0:0 CHAP: I RESPONSE id 14 len 27 from "2500-1"
Jan 1 00:32:55.083: Se0:0 PPP: Phase is FORWARDING
Jan 1 00:32:55.083: Se0:0 VPDN: Got DNIS string 614629
Jan 1 00:32:55.083: Se0:0 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 00:32:55.083: Serial0:0 AAA/AUTHOR/VPDN (480033158): 
Port='Serial0:0' list='default' service=NET
Jan 1 00:32:55.083: AAA/AUTHOR/VPDN: Serial0:0 (480033158) user='dnis:614629'
Jan 1 00:32:55.087: Serial0:0 AAA/AUTHOR/VPDN (480033158): send AV service=ppp
Jan 1 00:32:55.087: Serial0:0 AAA/AUTHOR/VPDN (480033158): send AV protocol=vpdn
Jan 1 00:32:55.087: Serial0:0 AAA/AUTHOR/VPDN (480033158): found list "default"
Jan 1 00:32:55.087: Serial0:0 AAA/AUTHOR/VPDN (480033158): Method=NSA_LAB (radius)
Jan 1 00:32:55.087: RADIUS: Initial Transmit Serial0:0 id 50 10.51.6.3:1645, 
Access-Request, len 100
Jan 1 00:32:55.087: Attribute 4 6 0A330644
Jan 1 00:32:55.087: Attribute 5 6 00000000
Jan 1 00:32:55.087: Attribute 26 17 00000009020B5365
Jan 1 00:32:55.087: Attribute 61 6 00000002
Jan 1 00:32:55.087: Attribute 1 13 646E6973
Jan 1 00:32:55.087: Attribute 30 8 36313436
Jan 1 00:32:55.087: Attribute 2 18 F0AF3BC4
Jan 1 00:32:55.087: Attribute 6 6 00000005
Jan 1 00:32:55.091: RADIUS: Received from id 50 10.51.6.3:1645, 
Access-Accept, len 167
Jan 1 00:32:55.091: Attribute 6 6 00000005
Jan 1 00:32:55.091: Attribute 26 29 0000000901177670
Jan 1 00:32:55.091: Attribute 26 26 0000000901147670
Jan 1 00:32:55.091: Attribute 26 47 0000000901297670
Jan 1 00:32:55.091: Attribute 26 39 0000000901217670

!--- LAC receives a call, negotiates PPP, LCP is declared Open, !--- the dialed number is queried to ascertain if this is a VPDN customer. !--- VPDN attempts to find an existing tunnel for the user, queries RADIUS for !--- the tunnel information.

Jan 1 00:32:55.091: RADIUS: saved authorization data for user 61F40024 at 
61F9813C
Jan 1 00:32:55.091: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 00:32:55.091: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 00:32:55.091: RADIUS: cisco AVPair "vpdn:ip-addresses=10.51.6.82,10.51.6.59"
Jan 1 00:32:55.095: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 00:32:55.095: AAA/AUTHOR (480033158): Post authorization status = PASS_ADD
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV ip-addresses=
10.51.6.82,10.51.6.59
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV l2tp-tunnel-password=hello
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: LAC hgw
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: 2 IP addresses
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: IP 10.51.6.82 Priority 1
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: IP 10.51.6.59 Priority 1
Jan 1 00:32:55.095: Se0:0 VPDN/: curlvl 1 Address 0: 10.51.6.82, priority 1 
Jan 1 00:32:55.095: Se0:0 VPDN/: Select non-active address 10.51.6.82, priority 1

!--- The tunnel information is downloaded, using Cisco VSA. Two LNS IP !--- Addresses are used with a ',' as the delimiter, indicating that both !--- have equal priority. In this case 10.51.6.82 is selected as the tunnel !--- endpoint.

Jan 1 00:32:55.095: Se0:0 VPDN: Find LNS process created
Jan 1 00:32:55.095: Tnl 49467 L2TP: SM State idle
Jan 1 00:32:55.095: Tnl 49467 L2TP: O SCCRQ 
Jan 1 00:32:55.099: Tnl 49467 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 00:32:55.099: Tnl 49467 L2TP: SM State wait-ctl-reply
Jan 1 00:32:55.099: Se0:0 VPDN: Forward to address 10.51.6.82
Jan 1 00:32:55.099: Se0:0 VPDN: Pending
Jan 1 00:32:55.099: Se0:0 VPDN: Process created
Jan 1 00:32:55.191: Tnl 49467 L2TP: I SCCRP from l2tp-gw
Jan 1 00:32:55.191: Tnl 49467 L2TP: Got a challenge from remote peer, l2tp-gw
Jan 1 00:32:55.191: Tnl 49467 L2TP: Got a response from remote peer, l2tp-gw
Jan 1 00:32:55.191: Tnl 49467 L2TP: Tunnel Authentication success
Jan 1 00:32:55.191: Tnl 49467 L2TP: Tunnel state change from 
wait-ctl-reply to established
Jan 1 00:32:55.191: Tnl 49467 L2TP: O SCCCN to l2tp-gw tnlid 62193
Jan 1 00:32:55.195: Tnl 49467 L2TP: SM State established
Jan 1 00:32:55.195: Tnl/Cl 49467/16 L2TP: Session FS enabled
Jan 1 00:32:55.195: Tnl/Cl 49467/16 L2TP: Session state change 
from idle to wait-for-tunnel
Jan 1 00:32:55.195: Se0:0 Tnl/Cl 49467/16 L2TP: Create session
Jan 1 00:32:55.195: Tnl 49467 L2TP: SM State established
Jan 1 00:32:55.195: Se0:0 Tnl/Cl 49467/16 L2TP: O ICRQ to l2tp-gw 62193/0
Jan 1 00:32:55.195: Se0:0 Tnl/Cl 49467/16 L2TP: Session state change 
from wait-for-tunnel to wait-reply
Jan 1 00:32:55.195: Se0:0 VPDN: 2500-1 is forwarded
Jan 1 00:32:55.327: Se0:0 Tnl/Cl 49467/16 L2TP: O ICCN to l2tp-gw 62193/17
Jan 1 00:32:55.327: Se0:0 Tnl/Cl 49467/16 L2TP: Session state change 
from wait-reply to established
Jan 1 00:32:56.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0:0, 
changed state to up
Jan 1 00:33:00.851: %ISDN-6-CONNECT:Interface Serial0:0 is now connected to 2500-1
Jan 1 00:33:06.111: %ISDN-6-CONNECT: 
Interface Serial0:1 is now connected to N/A N/A

!--- Second call is received by the LAC, !--- the dialed number is a VPDN customer.

Jan 1 00:33:35.027: As1 LCP: I CONFREQ [Closed] id 1 len 23
- snip -
Jan 1 00:33:39.275: As1 LCP: State is Open
Jan 1 00:33:39.275: As1 PPP: Phase is AUTHENTICATING, by this end
Jan 1 00:33:39.275: As1 CHAP: Using alternate hostname 5300-1
Jan 1 00:33:39.275: As1 CHAP: O CHALLENGE id 2 len 27 from "5300-1"
Jan 1 00:33:39.383: As1 CHAP: I RESPONSE id 2 len 25 from "paul"
Jan 1 00:33:39.383: As1 PPP: Phase is FORWARDING
Jan 1 00:33:39.383: As1 VPDN: Got DNIS string 614629
Jan 1 00:33:39.383: As1 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): 
Port='Async1' list='default' service=NET
Jan 1 00:33:39.387: AAA/AUTHOR/VPDN: Async1 (3019717950) user='dnis:614629'
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): send AV service=ppp
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): send AV protocol=vpdn
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): found list "default"
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): Method=NSA_LAB (radius)
Jan 1 00:33:39.387: RADIUS: Initial Transmit Async1 id 52 10.51.6.3:1645, 
Access-Request, len 97
Jan 1 00:33:39.387: Attribute 4 6 0A330644
Jan 1 00:33:39.387: Attribute 5 6 00000001
Jan 1 00:33:39.387: Attribute 26 14 0000000902084173
Jan 1 00:33:39.387: Attribute 61 6 00000000
Jan 1 00:33:39.387: Attribute 1 13 646E6973
Jan 1 00:33:39.387: Attribute 30 8 36313436
Jan 1 00:33:39.387: Attribute 2 18 E9164E4C
Jan 1 00:33:39.387: Attribute 6 6 00000005
Jan 1 00:33:39.391: RADIUS: Received from id 52 10.51.6.3:1645, 
Access-Accept, len 167
Jan 1 00:33:39.391: Attribute 6 6 00000005
Jan 1 00:33:39.391: Attribute 26 29 0000000901177670
Jan 1 00:33:39.391: Attribute 26 26 0000000901147670
Jan 1 00:33:39.391: Attribute 26 47 0000000901297670
Jan 1 00:33:39.391: Attribute 26 39 0000000901217670
Jan 1 00:33:39.391: RADIUS: saved authorization data for user 
621904CC at 61FAB9EC
Jan 1 00:33:39.391: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 00:33:39.391: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 00:33:39.391: RADIUS: cisco AVPair "vpdn:ip-addresses=10.51.6.82,10.51.6.59"
Jan 1 00:33:39.391: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 00:33:39.395: AAA/AUTHOR (3019717950): Post authorization status = PASS_ADD
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: 
Processing AV ip-addresses=10.51.6.82,10.51.6.59
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: 
Processing AV l2tp-tunnel-password=hello
Jan 1 00:33:39.395: As1 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 00:33:39.395: As1 VPDN/RPMS/: LAC hgw
Jan 1 00:33:39.395: As1 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 00:33:39.395: As1 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 00:33:39.395: As1 VPDN/RPMS/: 2 IP addresses
Jan 1 00:33:39.395: As1 VPDN/RPMS/: IP 10.51.6.82 Priority 1
Jan 1 00:33:39.395: As1 VPDN/RPMS/: IP 10.51.6.59 Priority 1
Jan 1 00:33:39.395: As1 VPDN/: curlvl 1 Address 1: 10.51.6.59, priority 1
Jan 1 00:33:39.395: As1 VPDN/: Select non-active address 10.51.6.59, priority 1

!--- The second non-active endpoint is selected 10.51.6.59 !--- and the control connection is established.

Jan 1 00:33:39.395: As1 VPDN: Find LNS process created
Jan 1 00:33:39.395: Tnl 20770 L2TP: SM State idle
Jan 1 00:33:39.395: Tnl 20770 L2TP: O SCCRQ 
Jan 1 00:33:39.399: Tnl 20770 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 00:33:39.399: Tnl 20770 L2TP: SM State wait-ctl-reply
Jan 1 00:33:39.399: As1 VPDN: Forward to address 10.51.6.59
Jan 1 00:33:39.399: As1 VPDN: Pending
Jan 1 00:33:39.399: As1 VPDN: Process created
Jan 1 00:33:39.399: Tnl 20770 L2TP: I SCCRP from l2tp-gw
Jan 1 00:33:39.399: Tnl 20770 L2TP: Got a challenge from remote peer, l2tp-gw
Jan 1 00:33:39.399: Tnl 20770 L2TP: Got a response from remote peer, l2tp-gw
Jan 1 00:33:39.399: Tnl 20770 L2TP: Tunnel Authentication success
Jan 1 00:33:39.399: Tnl 20770 L2TP: Tunnel state change from 
wait-ctl-reply to established
Jan 1 00:33:39.403: Tnl 20770 L2TP: O SCCCN to l2tp-gw tnlid 42921
Jan 1 00:33:39.403: Tnl 20770 L2TP: SM State established
Jan 1 00:33:39.403: As1 VPDN: Forwarding...
Jan 1 00:33:39.403: Tnl/Cl 20770/17 L2TP: Session FS enabled
Jan 1 00:33:39.403: Tnl/Cl 20770/17 L2TP: Session state change from 
idle to wait-for-tunnel
Jan 1 00:33:39.403: As1 Tnl/Cl 20770/17 L2TP: Create session
Jan 1 00:33:39.403: Tnl 20770 L2TP: SM State established
Jan 1 00:33:39.403: As1 Tnl/Cl 20770/17 L2TP: O ICRQ to l2tp-gw 42921/0
Jan 1 00:33:39.403: As1 Tnl/Cl 20770/17 L2TP: Session state change from 
wait-for-tunnel to wait-reply
Jan 1 00:33:39.403: As1 VPDN: paul is forwarded
Jan 1 00:33:39.407: As1 Tnl/Cl 20770/17 L2TP: O ICCN to l2tp-gw 42921/16
Jan 1 00:33:39.407: As1 Tnl/Cl 20770/17 L2TP: Session state change from 
wait-reply to established

Failover LNS con coppie di attributi/valori specifiche del fornitore Cisco

Profilo RADIUS

Profili utente e tunnel RADIUS su server RADIUS Merit 3.6B:

2500-1 Password = "cisco" 
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.255

dnis:614629 Password = "cisco"
Service-Type = Outbound,
Cisco:Avpair = "vpdn:tunnel-type=l2tp",
Cisco:Avpair = "vpdn:tunnel-id=hgw",
Cisco:Avpair = "vpdn:ip-addresses=10.51.6.82/10.51.6.59",
Cisco:Avpair = "vpdn:l2tp-tunnel-password=hello"

Configurazione LAC e LNS

Come in precedenza.

Debug eseguiti da LAC

Jan 1 02:00:35.767: As2 LCP: State is Open
Jan 1 02:00:35.767: As2 PPP: Phase is AUTHENTICATING, by this end 
[0 sess, 0 load]
Jan 1 02:00:35.767: As2 CHAP: Using alternate hostname 5300-1
Jan 1 02:00:35.767: As2 CHAP: O CHALLENGE id 1 len 27 from "5300-1"
Jan 1 02:00:35.959: As2 CHAP: I RESPONSE id 1 len 25 from "paul"
Jan 1 02:00:35.959: As2 PPP: Phase is FORWARDING [0 sess, 0 load]
Jan 1 02:00:35.959: As2 VPDN: Got DNIS string 614629
Jan 1 02:00:35.959: As2 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 02:00:35.959: AAA/AUTHOR/VPDN: Async2 (3581154520) user='dnis:614629'
Jan 1 02:00:35.963: Async2 AAA/AUTHOR/VPDN (3581154520): send AV service=ppp
Jan 1 02:00:35.963: Async2 AAA/AUTHOR/VPDN (3581154520): send AV protocol=vpdn
Jan 1 02:00:35.963: Async2 AAA/AUTHOR/VPDN (3581154520): found list "default"
Jan 1 02:00:35.963: Async2 AAA/AUTHOR/VPDN (3581154520): Method=NSA_LAB (radius)
Jan 1 02:00:35.963: RADIUS: Initial Transmit Async2 id 56 10.51.6.3:1645, 
Access-Request, len 109
Jan 1 02:00:35.963: Attribute 4 6 0A330644
Jan 1 02:00:35.963: Attribute 5 6 00000000
Jan 1 02:00:35.963: Attribute 26 14 0000000902084173
Jan 1 02:00:35.963: Attribute 61 6 00000000
Jan 1 02:00:35.963: Attribute 1 13 646E6973
Jan 1 02:00:35.963: Attribute 30 8 36313436
Jan 1 02:00:35.963: Attribute 31 12 31363139
Jan 1 02:00:35.963: Attribute 2 18 2A5AF04C
Jan 1 02:00:35.963: Attribute 6 6 00000005
Jan 1 02:00:35.967: RADIUS: Received from id 56 10.51.6.3:1645, 
Access-Accept, len 167
Jan 1 02:00:35.967: Attribute 6 6 00000005
Jan 1 02:00:35.967: Attribute 26 29 0000000901177670
Jan 1 02:00:35.967: Attribute 26 26 0000000901147670
Jan 1 02:00:35.967: Attribute 26 47 0000000901297670
Jan 1 02:00:35.967: Attribute 26 39 0000000901217670
Jan 1 02:00:35.967: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 02:00:35.967: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 02:00:35.967: RADIUS: cisco AVPair "vpdn:ip-addresses=10.51.6.82/10.51.6.59"
Jan 1 02:00:35.967: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 02:00:35.967: AAA/AUTHOR (3581154520): Post authorization status = PASS_ADD
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV ip-addresses=
10.51.6.82/10.51.6.59
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV l2tp-tunnel-password=hello

!--- LAC receives a call, negotiates PPP, LCP is declared Open, !--- the dialed number is queried to ascertain if this is a VPDN customer. !--- VPDN attempts to find an existing tunnel for the user, queries RADIUS for !--- the tunnel information.

Jan 1 02:00:35.967: As2 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 02:00:35.971: As2 VPDN/RPMS/: LAC hgw
Jan 1 02:00:35.971: As2 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 02:00:35.971: As2 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 02:00:35.971: As2 VPDN/RPMS/: 2 IP addresses
Jan 1 02:00:35.971: As2 VPDN/RPMS/: IP 10.51.6.82 Priority 1
Jan 1 02:00:35.971: As2 VPDN/RPMS/: IP 10.51.6.59 Priority 2
Jan 1 02:00:35.971: As2 VPDN/: curlvl 1 Address 0: 10.51.6.82, priority 1
Jan 1 02:00:35.971: As2 VPDN/: Select non-active address 10.51.6.82, priority 1

!--- The tunnel information is downloaded, using Cisco VSA. !--- Two RADIUS server IP Address's are used with a '/' as the delimiter, !--- indicating that there are two priority groups. In this case 10.51.6.82, !--- as Priority level 1, is selected as the tunnel endpoint.

Jan 1 02:00:35.971: Tnl 17044 L2TP: SM State idle
Jan 1 02:00:35.971: Tnl 17044 L2TP: O SCCRQ 
Jan 1 02:00:35.971: Tnl 17044 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 02:00:35.971: Tnl 17044 L2TP: SM State wait-ctl-reply
Jan 1 02:00:35.971: As2 VPDN: Find LNS process created
Jan 1 02:00:35.971: As2 VPDN: Forward to address 10.51.6.82
Jan 1 02:00:35.971: As2 VPDN: Pending
Jan 1 02:00:35.971: As2 VPDN: Process created
Jan 1 02:00:35.983: Tnl 17044 L2TP: I SCCRP from l2tp-gw
Jan 1 02:00:35.983: Tnl 17044 L2TP: Got a challenge from remote peer, l2tp-gw
Jan 1 02:00:35.983: Tnl 17044 L2TP: Got a response from remote peer, l2tp-gw
Jan 1 02:00:35.983: Tnl 17044 L2TP: Tunnel Authentication success
Jan 1 02:00:35.983: Tnl 17044 L2TP: 
Tunnel state change from wait-ctl-reply to established
Jan 1 02:00:35.983: Tnl 17044 L2TP: O SCCCN to l2tp-gw tnlid 9017
Jan 1 02:00:35.983: Tnl 17044 L2TP: SM State established
Jan 1 02:00:35.983: As2 VPDN: Forwarding...
Jan 1 02:00:35.987: Tnl/Cl 17044/2 L2TP: Session FS enabled
Jan 1 02:00:35.987: Tnl/Cl 17044/2 L2TP: 
Session state change from idle to wait-for-tunnel
Jan 1 02:00:35.987: As2 Tnl/Cl 17044/2 L2TP: Create session
Jan 1 02:00:35.987: Tnl 17044 L2TP: SM State established
Jan 1 02:00:35.987: As2 Tnl/Cl 17044/2 L2TP: O ICRQ to l2tp-gw 9017/0
Jan 1 02:00:35.987: As2 Tnl/Cl 17044/2 L2TP: 
Session state change from wait-for-tunnel to wait-reply
Jan 1 02:00:35.987: As2 VPDN: paul is forwarded
Jan 1 02:00:35.995: As2 Tnl/Cl 17044/2 L2TP: O ICCN to l2tp-gw 9017/2
Jan 1 02:00:35.995: As2 Tnl/Cl 17044/2 L2TP: Session state change 
from wait-reply to established

!--- The Tunnel and Session are now established. !--- A second call is received by the LAC.

Jan 1 02:03:21.775: Se0:1 LCP: State is Open
Jan 1 02:03:21.775: Se0:1 PPP: Phase is AUTHENTICATING, by this end 
[0 sess, 0 load]
Jan 1 02:03:21.775: Se0:1 CHAP: Using alternate hostname 5300-1
Jan 1 02:03:21.775: Se0:1 CHAP: O CHALLENGE id 1 len 27 from "5300-1"
Jan 1 02:03:21.799: Se0:1 CHAP: I RESPONSE id 1 len 27 from "2500-1"
Jan 1 02:03:21.799: Se0:1 PPP: Phase is FORWARDING [0 sess, 0 load]
Jan 1 02:03:21.799: Se0:1 VPDN: Got DNIS string 614629
Jan 1 02:03:21.799: Se0:1 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): Port='Serial0:1' 
list='default' service=NET
Jan 1 02:03:21.799: AAA/AUTHOR/VPDN: Serial0:1 (2106866192) user='dnis:614629'
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): send AV service=ppp
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): send AV protocol=vpdn
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): found list "default"
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): Method=NSA_LAB (radius)
Jan 1 02:03:21.803: RADIUS: Initial Transmit Serial0:1 id 60 10.51.6.3:1645, 
Access-Request, len 112
Jan 1 02:03:21.803: Attribute 4 6 0A330644
Jan 1 02:03:21.803: Attribute 5 6 00000001
Jan 1 02:03:21.803: Attribute 26 17 00000009020B5365
Jan 1 02:03:21.803: Attribute 61 6 00000002
Jan 1 02:03:21.803: Attribute 1 13 646E6973
Jan 1 02:03:21.803: Attribute 30 8 36313436
Jan 1 02:03:21.803: Attribute 31 12 32303835
Jan 1 02:03:21.803: Attribute 2 18 1A511187
Jan 1 02:03:21.803: Attribute 6 6 00000005
Jan 1 02:03:21.803: RADIUS: Received from id 60 10.51.6.3:1645, 
Access-Accept, len 167
Jan 1 02:03:21.803: Attribute 6 6 00000005
Jan 1 02:03:21.803: Attribute 26 29 0000000901177670
Jan 1 02:03:21.803: Attribute 26 26 0000000901147670
Jan 1 02:03:21.803: Attribute 26 47 0000000901297670
Jan 1 02:03:21.803: Attribute 26 39 0000000901217670
Jan 1 02:03:21.807: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 02:03:21.807: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 02:03:21.807: RADIUS: cisco AVPair "vpdn:ip-addresses=10.51.6.82/10.51.6.59"
Jan 1 02:03:21.807: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 02:03:21.807: AAA/AUTHOR (2106866192): Post authorization status = PASS_ADD
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV ip-addresses=
10.51.6.82/10.51.6.59
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV l2tp-tunnel-password=hello
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: LAC hgw
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: 2 IP addresses
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: IP 10.51.6.82 Priority 1
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: IP 10.51.6.59 Priority 2
Jan 1 02:03:21.807: Se0:1 VPDN/: curlvl 1 Address 0: 10.51.6.82, priority 1
Jan 1 02:03:21.811: Se0:1 VPDN/: Select open address 10.51.6.82, priority 1
Jan 1 02:03:21.811: Se0:1 VPDN: Forward to address 10.51.6.82

!--- The tunnel information is downloaded, LNS - 10.51.6.82 is !--- selected again as the tunnel endpoint as this is in Priority level 1.

Jan 1 02:03:21.811: Se0:1 VPDN: Forwarding...
Jan 1 02:03:21.811: Tnl/Cl 17044/3 L2TP: Session state change from 
idle to wait-for-tunnel
Jan 1 02:03:21.811: Se0:1 Tnl/Cl 17044/3 L2TP: Create session
Jan 1 02:03:21.811: Tnl 17044 L2TP: SM State established
Jan 1 02:03:21.811: Se0:1 Tnl/Cl 17044/3 L2TP: O ICRQ to l2tp-gw 9017/0
Jan 1 02:03:21.811: Se0:1 Tnl/Cl 17044/3 L2TP: Session state change 
from wait-for-tunnel to wait-reply
Jan 1 02:03:21.811: Se0:1 VPDN: 2500-1 is forwarded
Jan 1 02:03:21.819: Se0:1 Tnl/Cl 17044/3 L2TP: O ICCN to l2tp-gw 9017/3
Jan 1 02:03:21.819: Se0:1 Tnl/Cl 17044/3 L2TP: Session state change 
from wait-reply to established

Bilanciamento del carico e failover LNS con coppie di attributi/valori specifiche del fornitore Cisco

Profilo RADIUS

Profilo utente e tunnel RADIUS su server RADIUS Merit 3.6B:

2500-1 Password = "cisco" 
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.255
dnis:614629 Password = "cisco"
Service-Type = Outbound,
Cisco:Avpair = "vpdn:tunnel-type=l2tp",
Cisco:Avpair = "vpdn:tunnel-id=hgw",
Cisco:Avpair = "vpdn:ip-addresses=
10.51.6.80,10.51.6.59/10.51.6.2,10.51.6.3/10.51.6.82,10.51.6.5",
Cisco:Avpair = "vpdn:l2tp-tunnel-password=hello"

Configurazione LAC e LNS

Come in precedenza.

Debug tratti da LAC

Jan 1 00:43:11.539: %LINK-3-UPDOWN: Interface Serial0:0, changed state to up

Jan 1 00:43:11.755: Se0:0 LCP: State is Open
Jan 1 00:43:11.755: Se0:0 PPP: Phase is AUTHENTICATING, by this end
Jan 1 00:43:11.755: Se0:0 CHAP: Using alternate hostname 5300-1
Jan 1 00:43:11.755: Se0:0 CHAP: O CHALLENGE id 18 len 27 from "5300-1"
Jan 1 00:43:11.775: Se0:0 CHAP: I RESPONSE id 18 len 27 from "2500-1"
Jan 1 00:43:11.775: Se0:0 PPP: Phase is FORWARDING
Jan 1 00:43:11.775: Se0:0 VPDN: Got DNIS string 614629
Jan 1 00:43:11.775: Se0:0 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): Port='Serial0:0' 
list='default' service=NET
Jan 1 00:43:11.775: AAA/AUTHOR/VPDN: Serial0:0 (2215378044) user='dnis:614629'
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): send AV service=ppp
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): send AV protocol=vpdn
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): found list "default"
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): Method=NSA_LAB (radius)
Jan 1 00:43:11.779: RADIUS: Initial Transmit Serial0:0 id 57 10.51.6.3:1645, 
Access-Request, len 112
Jan 1 00:43:11.779: Attribute 4 6 0A330644
Jan 1 00:43:11.779: Attribute 5 6 00000000
Jan 1 00:43:11.779: Attribute 26 17 00000009020B5365
Jan 1 00:43:11.779: Attribute 61 6 00000002
Jan 1 00:43:11.779: Attribute 1 13 646E6973
Jan 1 00:43:11.779: Attribute 30 8 36313436
Jan 1 00:43:11.779: Attribute 31 12 32303835
Jan 1 00:43:11.779: Attribute 2 18 BA50FCD1
Jan 1 00:43:11.779: Attribute 6 6 00000005
Jan 1 00:43:11.783: RADIUS: Received from id 57 10.51.6.3:1645, 
Access-Accept, len 208
Jan 1 00:43:11.783: Attribute 6 6 00000005
Jan 1 00:43:11.783: Attribute 26 29 0000000901177670
Jan 1 00:43:11.783: Attribute 26 26 0000000901147670
Jan 1 00:43:11.783: Attribute 26 88 0000000901527670
Jan 1 00:43:11.783: Attribute 26 39 0000000901217670
Jan 1 00:43:11.783: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 00:43:11.783: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 00:43:11.783: RADIUS: cisco AVPair "vpdn:ip-addresses=
10.51.6.80,10.51.6.59/10.51.6.2,10.51.6.3/10.51.6.82,10.51.6.5"
Jan 1 00:43:11.783: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 00:43:11.783: AAA/AUTHOR (2215378044): Post authorization status = PASS_ADD
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV ip-addresses=
10.51.6.80,10.51.6.59/10.51.6.2,10.51.6.3/10.51.6.82,10.51.6.5
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: 
Processing AV l2tp-tunnel-password=hello
Jan 1 00:43:11.783: Se0:0 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 00:43:11.783: Se0:0 VPDN/RPMS/: LAC hgw
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: 6 IP addresses
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.80 Priority 1
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.59 Priority 1
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.2 Priority 2
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.3 Priority 2
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.82 Priority 3
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.5 Priority 3

!--- The tunnel information is downloaded, using Cisco VSA. Two RADIUS !--- server IP Addresses are used with a '/' as the delimiter for each !--- of the three priority groups. In this case, 10.51.6.82 in Priority !--- Group 3, is the tunnel endpoint that is valid.

Jan 1 00:43:11.787: Se0:0 VPDN/: curlvl 1 Address 1: 10.51.6.59, priority 1 
Jan 1 00:43:11.787: VPDN: Free busy address 10.51.6.59
Jan 1 00:43:11.787: Se0:0 VPDN/: Select non-active address 10.51.6.59, priority 1
Jan 1 00:43:11.787: Se0:0 VPDN: Find LNS process created
Jan 1 00:43:11.787: Tnl 8262 L2TP: SM State idle
Jan 1 00:43:11.787: Tnl 8262 L2TP: O SCCRQ 
Jan 1 00:43:11.787: Tnl 8262 L2TP: Tunnel state change from idle to wait-ctl-reply
Jan 1 00:43:11.787: Tnl 8262 L2TP: SM State wait-ctl-reply
Jan 1 00:43:11.787: Se0:0 VPDN: Forward to address 10.51.6.59
Jan 1 00:43:11.791: Se0:0 VPDN: Pending
Jan 1 00:43:11.791: Se0:0 VPDN: Process created
Jan 1 00:43:12.787: Tnl 8262 L2TP: O Resend SCCRQ, flg TLS, ver 2, len 128, 
tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:12.787: Tnl 8262 L2TP: Control channel retransmit delay set to 
1 seconds
Jan 1 00:43:13.787: Tnl 8262 L2TP: O Resend SCCRQ, flg TLS, ver 2, len 128, 
tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:13.787: Tnl 8262 L2TP: Control channel retransmit delay set to 
2 seconds
Jan 1 00:43:15.787: Tnl 8262 L2TP: Timeout opening tunnel to 10.51.6.59
Jan 1 00:43:15.787: Tnl 63291 L2TP: Control channel retransmit delay set to 
4 seconds
Jan 1 00:43:15.787: Se0:0 VPDN/: curlvl 1 Address 1: 10.51.6.59, priority 1 busy

!--- 10.51.6.59 is selected as the first non-active IP Address in Priority !--- Group 1. As we cannot establish the Control Connection after the !--- 4 second SCCRQ timeout, we select the next non-active IP !--- Address in the same Priority Group.

Jan 1 00:43:15.787: Se0:0 VPDN/: curlvl 1 Address 0: 10.51.6.80, priority 1 
Jan 1 00:43:15.787: VPDN: Free busy address 10.51.6.80
Jan 1 00:43:15.787: Se0:0 VPDN/: Select non-active address 10.51.6.80, priority 1
Jan 1 00:43:15.787: Tnl 63291 L2TP: Tunnel state change from wait-ctl-reply 
to idle
Jan 1 00:43:15.787: Tnl 63291 L2TP: SM State idle
Jan 1 00:43:15.787: Tnl 63291 L2TP: O SCCRQ 
Jan 1 00:43:15.787: Tnl 63291 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 00:43:15.787: Tnl 63291 L2TP: SM State wait-ctl-reply
Jan 1 00:43:16.787: Tnl 63291 L2TP: O Resend SCCRQ, flg TLS, ver 2, 
len 128, tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:16.787: Tnl 63291 L2TP: Control channel retransmit delay 
set to 1 seconds
Jan 1 00:43:17.543: %ISDN-6-CONNECT: Interface Serial0:0 is now connected 
to 2085730592 
Jan 1 00:43:17.787: Tnl 63291 L2TP: O Resend SCCRQ, flg TLS, ver 2, len 128, 
tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:17.787: Tnl 63291 L2TP: Control channel retransmit delay set 
to 2 seconds
Jan 1 00:43:19.787: Tnl 63291 L2TP: Timeout opening tunnel to 10.51.6.80
Jan 1 00:43:19.787: Tnl 52784 L2TP: Control channel retransmit delay set 
to 4 seconds
Jan 1 00:43:19.787: Se0:0 VPDN/: curlvl 1 Address 0: 10.51.6.80, priority 1 busy
Jan 1 00:43:19.787: Se0:0 VPDN/: curlvl 1 Address 1: 10.51.6.59, priority 1 busy
Jan 1 00:43:19.787: Se0:0 VPDN/: curlvl 2 Address 2: 10.51.6.2, priority 2
Jan 1 00:43:19.787: VPDN: Free busy address 10.51.6.2
Jan 1 00:43:19.787: Se0:0 VPDN/: Select non-active address 10.51.6.2, priority 2
Jan 1 00:43:19.787: Tnl 52784 L2TP: Tunnel state change from 
wait-ctl-reply to idle
Jan 1 00:43:19.787: Tnl 52784 L2TP: SM State idle
Jan 1 00:43:19.787: Tnl 52784 L2TP: O SCCRQ 
Jan 1 00:43:19.787: Tnl 52784 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 00:43:19.787: Tnl 52784 L2TP: SM State wait-ctl-reply
Jan 1 00:43:20.787: Tnl 52784 L2TP: O Resend SCCRQ, flg TLS, ver 2, 
len 128, tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:20.787: Tnl 52784 L2TP: Control channel retransmit 
delay set to 1 seconds
Jan 1 00:43:21.671: Se0:0 CHAP: I RESPONSE id 18 len 27 from "2500-1"
Jan 1 00:43:21.671: Se0:0 VPDN: LCP state already FORWARDING/FORWARDED, 
silent discard
Jan 1 00:43:21.787: Tnl 52784 L2TP: O Resend SCCRQ, flg TLS, ver 2, len 128, 
tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:21.787: Tnl 52784 L2TP: Control channel retransmit 
delay set to 2 seconds
Jan 1 00:43:23.787: Tnl 52784 L2TP: Timeout opening tunnel to 10.51.6.2
Jan 1 00:43:23.787: Tnl 42277 L2TP: Control channel retransmit 
delay set to 4 seconds
Jan 1 00:43:23.787: Se0:0 VPDN/: curlvl 2 Address 2: 10.51.6.2, priority 2 busy
Jan 1 00:43:23.787: Se0:0 VPDN/: curlvl 2 Address 3: 10.51.6.3, priority 2
Jan 1 00:43:23.787: VPDN: Free busy address 10.51.6.3
Jan 1 00:43:23.787: Se0:0 VPDN/: Select non-active address 10.51.6.3, priority 2
Jan 1 00:43:23.787: Tnl 42277 L2TP: Tunnel state change from 
wait-ctl-reply to idle
Jan 1 00:43:23.787: Tnl 42277 L2TP: SM State idle
Jan 1 00:43:23.787: Tnl 42277 L2TP: O SCCRQ 
Jan 1 00:43:23.787: Tnl 42277 L2TP: Tunnel state change from 
idle to wait-ctl-reply
Jan 1 00:43:23.787: Tnl 42277 L2TP: SM State wait-ctl-reply
Jan 1 00:43:24.787: Tnl 42277 L2TP: O Resend SCCRQ, flg TLS, ver 2, 
len 128, tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:24.787: Tnl 42277 L2TP: Control channel retransmit delay 
set to 1 seconds
Jan 1 00:43:25.787: Tnl 42277 L2TP: O Resend SCCRQ, flg TLS, ver 2, 
len 128, tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:25.787: Tnl 42277 L2TP: Control channel retransmit 
delay set to 2 seconds
Jan 1 00:43:27.787: Tnl 42277 L2TP: Timeout opening tunnel to 10.51.6.3
Jan 1 00:43:27.787: Tnl 31770 L2TP: Control channel retransmit 
delay set to 4 seconds
Jan 1 00:43:27.787: Se0:0 VPDN/: curlvl 2 Address 3: 10.51.6.3, priority 2 busy
Jan 1 00:43:27.787: Se0:0 VPDN/: curlvl 2 Address 2: 10.51.6.2, priority 2 busy
Jan 1 00:43:27.787: Se0:0 VPDN/: curlvl 3 Address 4: 10.51.6.82, priority 3 
Jan 1 00:43:27.787: Se0:0 VPDN/: Select non-active address 10.51.6.82, priority 3

!--- Eventually arrive at the IP Address 10.51.6.82 in Priority Group 3. !--- As this is valid, the Control Connection and session are established.

Jan 1 00:43:27.787: Tnl 31770 L2TP: Tunnel state change from 
wait-ctl-reply to idle
Jan 1 00:43:27.787: Tnl 31770 L2TP: SM State idle
Jan 1 00:43:27.787: Tnl 31770 L2TP: O SCCRQ 
Jan 1 00:43:27.787: Tnl 31770 L2TP: Tunnel state change from 
idle to wait-ctl-reply
Jan 1 00:43:27.787: Tnl 31770 L2TP: SM State wait-ctl-reply
Jan 1 00:43:27.799: Tnl 31770 L2TP: I SCCRP from l2tp-gw
Jan 1 00:43:27.799: Tnl 31770 L2TP: Got a challenge from remote peer, l2tp-gw
Jan 1 00:43:27.799: Tnl 31770 L2TP: Got a response from remote peer, l2tp-gw
Jan 1 00:43:27.799: Tnl 31770 L2TP: Tunnel Authentication success
Jan 1 00:43:27.799: Tnl 31770 L2TP: Tunnel state change from 
wait-ctl-reply to established
Jan 1 00:43:27.799: Tnl 31770 L2TP: O SCCCN to l2tp-gw tnlid 3843
Jan 1 00:43:27.799: Tnl 31770 L2TP: SM State established
Jan 1 00:43:27.799: Se0:0 VPDN: Forwarding...
Jan 1 00:43:27.799: Tnl/Cl 31770/7 L2TP: Session FS enabled
Jan 1 00:43:27.799: Tnl/Cl 31770/7 L2TP: Session state change from 
idle to wait-for-tunnel
Jan 1 00:43:27.803: Se0:0 Tnl/Cl 31770/7 L2TP: Create session
Jan 1 00:43:27.803: Tnl 31770 L2TP: SM State established
Jan 1 00:43:27.803: Se0:0 Tnl/Cl 31770/7 L2TP: O ICRQ to l2tp-gw 3843/0
Jan 1 00:43:27.803: Se0:0 Tnl/Cl 31770/7 L2TP: Session state change from 
wait-for-tunnel to wait-reply
Jan 1 00:43:27.803: Se0:0 VPDN: 2500-1 is forwarded
Jan 1 00:43:27.811: Se0:0 Tnl/Cl 31770/7 L2TP: O ICCN to l2tp-gw 3843/9
Jan 1 00:43:27.811: Se0:0 Tnl/Cl 31770/7 L2TP: Session state change from 
wait-reply to established
Jan 1 00:43:28.803: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0:0, 
changed state to up

Informazioni correlate

Questo documento ti è stato utile?

Feedback

Contattaci

Apri una richiesta di assistenza
(Occorre un contratto di servizio Cisco)