Configurazione di SVTI compatibile con IKEv2 VRF

Opzioni per il download

PDF (198.0 KB)
Visualizza con Adobe Reader su diversi dispositivi
ePub (144.1 KB)
Visualizza in diverse app su iPhone, iPad, Android, Sony Reader o Windows Phone
Mobi (Kindle) (118.0 KB)
Visualizza su dispositivo Kindle o tramite app Kindle su più dispositivi

Aggiornato:23 marzo 2020

ID documento:214938

Linguaggio senza pregiudizi

La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.

Informazioni su questa traduzione

Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).

Sommario

Introduzione

Prerequisiti

Requisiti

Componenti usati

Configurazione

Esempio di rete

Premesse

Configurazione

Verifica

Risoluzione dei problemi

Comandi per la risoluzione dei problemi

Output di esempio del comando debug

Riferimenti

Introduzione

In questo documento viene illustrato un esempio di configurazione per configurare una SVTI (Static Virtual Tunnel Interfaces) con supporto VRF (Virtual Private Network) tra due peer VPN (Virtual Private Network) tramite il protocollo IKEv2 (Internet Key Exchange versione 2). Questa configurazione include un VRF di cui fa parte la subnet locale e un VRF (FVRF) della porta anteriore in cui viene stabilita la connessione del tunnel.

Prerequisiti

Requisiti

Cisco raccomanda la conoscenza dei seguenti argomenti:

Conoscenze base della configurazione della CLI di IOS
Conoscenze base di IKEv2 e IPSEC

Componenti usati

Per la stesura del documento, è stato usato un router Cisco IOS serie 2900 con software Cisco IOS® versione 15.7.

Le informazioni discusse in questo documento fanno riferimento a dispositivi usati in uno specifico ambiente di emulazione. Su tutti i dispositivi menzionati nel documento la configurazione è stata ripristinata ai valori predefiniti. Se la rete è in produzione, valutare attentamente eventuali conseguenze derivanti dall'uso dei comandi.

Configurazione

In questa sezione vengono presentate le informazioni necessarie per configurare le funzionalità descritte più avanti nel documento.

Esempio di rete

Premesse

I tunnel compatibili con VRF vengono utilizzati per connettere le reti dei clienti separate da altre reti principali non attendibili o da reti principali con infrastrutture diverse. Con questa configurazione, è possibile configurare qualsiasi origine e destinazione di un tunnel in modo che appartenga a qualsiasi tabella VRF.

Sull'interfaccia del tunnel, il comando "vrf forwarding" viene usato per posizionare l'interfaccia del tunnel in quella particolare tabella di routing. Con il comando "tunnel vrf", il router deve usare la tabella di routing del VRF specificata per gli indirizzi IP di origine e destinazione del tunnel.

Nell'esempio utilizzato per questo documento, il VRF dell'interfaccia di loopback è simile al VRF di un segmento LAN. I pacchetti che entrano attraverso questa interfaccia vengono instradati usando questo VRF. I pacchetti in uscita dal tunnel vengono inoltrati a questo VRF.

Il VRF configurato sul tunnel con il comando "tunnel vrf" è il VRF di trasporto. Il VRF viene applicato al payload incapsulato e viene usato per cercare gli endpoint del tunnel. Questo VRF è lo stesso VRF associato all'interfaccia fisica su cui il tunnel invia i pacchetti.

Configurazione

Passaggio 1. Definire i VRF. Nell'esempio, due VRF vengono definiti rispettivamente con il nome "local" e "internet" per le interfacce LAN e WAN.

SiteA :

! —— Defining vrf 

vrf definition internet
 rd 2:2
 address-family ipv4
 exit-address-family

vrf definition local
 rd 1:1   
 address-family ipv4
 exit-address-family

SiteB :

! —— Defining vrf 

vrf definition internet
 rd 2:2
 address-family ipv4
 exit-address-family

vrf definition local
 rd 1:1   
 address-family ipv4
 exit-address-family

Passaggio 2. Configurare i parametri necessari per attivare un tunnel IKEv2, a partire dalla creazione della proposta IKEv2 e del keyring. Quindi, configurare il profilo IKEv2 sul punto in cui viene chiamata la sequenza di chiavi crittografiche e, per concludere con la configurazione crittografica, configurare il profilo IPSEC in modo che includa anche il set di trasformazioni IPSEC e il profilo IKEv2.

SiteA :

! —— IKEv2 Proposal

crypto ikev2 proposal prop-1 
 encryption aes-cbc-256
 integrity sha512
 group 5

! --- IKEv2 Policy

crypto ikev2 policy policy-1
 match fvrf internet
 match address local 192.168.1.1
 proposal prop-1

! —— IKEv2 Keyring

crypto ikev2 keyring keyring-1
 peer ANY
  address 0.0.0.0 0.0.0.0
  pre-shared-key cisco123
 
! —— IKEv2 Profile

crypto ikev2 profile IKEv2-Profile-1
 match fvrf internet
 match identity remote address 0.0.0.0 
 authentication remote pre-share
 authentication local pre-share
 keyring local keyring-1

! —— IPSEC Transform set

crypto ipsec transform-set transform-1 esp-aes 256 esp-sha-hmac 
 mode transport

! —— IPSEC Profile

crypto ipsec profile IPSEC-Profile-1
 set transform-set transform-1 
 set ikev2-profile IKEv2-Profile-1

SiteB :

! —— IKEv2 Proposal

crypto ikev2 proposal prop-1 
 encryption aes-cbc-256
 integrity sha512
 group 5

! -- IKEv2 Policy

crypto ikev2 policy policy-1
 match fvrf internet
 match address local 192.168.2.1
 proposal prop-1

! —— IKEv2 Keyring

crypto ikev2 keyring keyring-1
 peer ANY
  address 0.0.0.0 0.0.0.0
  pre-shared-key cisco123
 
! —— IKEv2 Profile

crypto ikev2 profile IKEv2-Profile-1
 match fvrf internet
 match identity remote address 0.0.0.0 
 authentication remote pre-share
 authentication local pre-share
 keyring local keyring-1

! —— IPSEC Transform set

crypto ipsec transform-set transform-1 esp-aes 256 esp-sha-hmac 
 mode transport

! —— IPSEC Profile

crypto ipsec profile IPSEC-Profile-1
 set transform-set transform-1 
 set ikev2-profile IKEv2-Profile-1

Passaggio 3. Configurare le interfacce necessarie. Nell'esempio, l'interfaccia di loopback fa parte del VRF "locale" e agisce come traffico interessante. L'interfaccia fisica, parte di "internet" VRF, è l'interfaccia WAN connessa all'ISP. L'interfaccia del tunnel deve attivare l'incapsulamento GRE crittografato con IPSEC.

SiteA :

! —— Interface Configuration

interface Loopback1
 vrf forwarding local
 ip address 10.1.1.1 255.255.255.0

interface Tunnel1
 vrf forwarding local
 ip address 10.10.10.1 255.255.255.0
 tunnel source 192.168.1.1
 tunnel destination 192.168.2.1
 tunnel key 777
 tunnel vrf internet
 tunnel protection ipsec profile IPSEC-Profile-1

interface GigabitEthernet0/0
 vrf forwarding internet
 ip address 192.168.1.1 255.255.255.0

SiteB :

! —— Interface Configuration

interface Loopback1
 vrf forwarding local
 ip address 10.2.2.2 255.255.255.0

interface Tunnel1
 vrf forwarding local
 ip address 10.10.10.2 255.255.255.0
 tunnel source 192.168.2.1
 tunnel destination 192.168.1.1
 tunnel key 777
 tunnel vrf internet
 tunnel protection ipsec profile IPSEC-Profile-1

interface GigabitEthernet0/0
 vrf forwarding internet
 ip address 192.168.2.1 255.255.255.0

Passaggio 4: Configurare le route specifiche di VRF. In questa configurazione, un percorso in "Internet" VRF è configurato come percorso predefinito che punta all'hop successivo dell'interfaccia fisica (o ISP in ambienti reali). Il secondo percorso nel VRF "locale" è per la subnet VPN remota che punta all'interfaccia del tunnel che alla fine fa sì che il traffico passi attraverso l'interfaccia del tunnel e attivi la VPN.

SiteA :

! —— VRF specific routes

ip route vrf internet 0.0.0.0 0.0.0.0 192.168.1.2
ip route vrf local 10.2.2.0 255.255.255.0 Tunnel1

SiteB :

! —— VRF specific routes

ip route vrf internet 0.0.0.0 0.0.0.0 192.168.2.2
ip route vrf local 10.1.1.0 255.255.255.0 tunnel 1

Verifica

Le informazioni contenute in questa sezione permettono di verificare che la configurazione funzioni correttamente.

Cisco CLI Analyzer supporta alcuni comandi show. Usare Cisco CLI Analyzer per visualizzare un'analisi dell'output del comando show.

SiteA :
 
SiteA#show crypto ikev2 sa
IPv4 Crypto IKEv2  SA

            Tunnel-id Local                 Remote                fvrf/ivrf            Status
1         192.168.1.1/500       192.168.2.1/500       internet/local       READY  
      Encr: AES-CBC, keysize: 256, PRF: SHA512, Hash: SHA512, DH Grp:5, Auth sign: PSK, Auth verify: PSK
      Life/Active Time: 86400/128 sec
 

SiteA#show crypto ipsec sa  detail

interface: Tunnel1
    Crypto map tag: Tunnel1-head-0, local addr 192.168.1.1

   protected vrf: local
   local  ident (addr/mask/prot/port): (192.168.1.1/255.255.255.255/47/0)
   remote ident (addr/mask/prot/port): (192.168.2.1/255.255.255.255/47/0)
   current_peer 192.168.2.1 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 25, #pkts encrypt: 25, #pkts digest: 25
    #pkts decaps: 25, #pkts decrypt: 25, #pkts verify: 25
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #pkts no sa (send) 0, #pkts invalid sa (rcv) 0
    #pkts encaps failed (send) 0, #pkts decaps failed (rcv) 0
    #pkts invalid prot (recv) 0, #pkts verify failed: 0
    #pkts invalid identity (recv) 0, #pkts invalid len (rcv) 0
    #pkts replay rollover (send): 0, #pkts replay rollover (rcv) 0
    ##pkts replay failed (rcv): 0
    #pkts tagged (send): 0, #pkts untagged (rcv): 0
    #pkts not tagged (send): 0, #pkts not untagged (rcv): 0
    #pkts internal err (send): 0, #pkts internal err (recv) 0
          
     local crypto endpt.: 192.168.1.1, remote crypto endpt.: 192.168.2.1
     plaintext mtu 1458, path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0
     current outbound spi: 0xE0B1BF6B(3769745259)
     PFS (Y/N): N, DH group: none

     inbound esp sas:
      spi: 0xCA8E7D53(3398335827)
        transform: esp-256-aes esp-sha-hmac ,
        in use settings ={Transport, }
        conn id: 2010, flow_id: Onboard VPN:10, sibling_flags 80000000, crypto map: Tunnel1-head-0
        sa timing: remaining key lifetime (k/sec): (4368363/3461)
        IV size: 16 bytes
        replay detection support: Y
        Status: ACTIVE(ACTIVE)

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0xE0B1BF6B(3769745259)
        transform: esp-256-aes esp-sha-hmac ,
        in use settings ={Transport, }
        conn id: 2009, flow_id: Onboard VPN:9, sibling_flags 80000000, crypto map: Tunnel1-head-0
        sa timing: remaining key lifetime (k/sec): (4368363/3461)
        IV size: 16 bytes
        replay detection support: Y
        Status: ACTIVE(ACTIVE)

     outbound ah sas:

     outbound pcp sas:
 
SiteA#show crypto session remote 192.168.2.1 detail
Crypto session current status

Code: C - IKE Configuration mode, D - Dead Peer Detection     
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation     
X - IKE Extended Authentication, F - IKE Fragmentation
R - IKE Auto Reconnect, U - IKE Dynamic Route Update
S - SIP VPN

Interface: Tunnel1
Profile: IKEv2-Profile-1
Uptime: 00:02:35
Session status: UP-ACTIVE     
Peer: 192.168.2.1 port 500 fvrf: internet ivrf: local
      Phase1_id: 192.168.2.1
      Desc: (none)
  Session ID: 3  
  IKEv2 SA: local 192.168.1.1/500 remote 192.168.2.1/500 Active
          Capabilities:(none) connid:1 lifetime:23:57:25
  IPSEC FLOW: permit 47 host 192.168.1.1 host 192.168.2.1
        Active SAs: 2, origin: crypto map
        Inbound:  #pkts dec'ed 25 drop 0 life (KB/Sec) 4368363/3444
        Outbound: #pkts enc'ed 25 drop 0 life (KB/Sec) 4368363/3444

SiteB :
 
SiteB#show crypto ikev2 sa
IPv4 Crypto IKEv2  SA

           Tunnel-id Local                 Remote                fvrf/ivrf            Status
1         192.168.2.1/500       192.168.1.1/500       internet/local       READY  
      Encr: AES-CBC, keysize: 256, PRF: SHA512, Hash: SHA512, DH Grp:5, Auth sign: PSK, Auth verify: PSK
      Life/Active Time: 86400/90 sec
 

SiteB#show crypto ipsec sa detail

interface: Tunnel1
    Crypto map tag: Tunnel1-head-0, local addr 192.168.2.1

   protected vrf: local
   local  ident (addr/mask/prot/port): (192.168.2.1/255.255.255.255/47/0)
   remote ident (addr/mask/prot/port): (192.168.1.1/255.255.255.255/47/0)
   current_peer 192.168.1.1 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 25, #pkts encrypt: 25, #pkts digest: 25
    #pkts decaps: 25, #pkts decrypt: 25, #pkts verify: 25
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #pkts no sa (send) 0, #pkts invalid sa (rcv) 0
    #pkts encaps failed (send) 0, #pkts decaps failed (rcv) 0
    #pkts invalid prot (recv) 0, #pkts verify failed: 0
    #pkts invalid identity (recv) 0, #pkts invalid len (rcv) 0
    #pkts replay rollover (send): 0, #pkts replay rollover (rcv) 0
    ##pkts replay failed (rcv): 0
    #pkts tagged (send): 0, #pkts untagged (rcv): 0
    #pkts not tagged (send): 0, #pkts not untagged (rcv): 0
    #pkts internal err (send): 0, #pkts internal err (recv) 0
          
     local crypto endpt.: 192.168.2.1, remote crypto endpt.: 192.168.1.1
     plaintext mtu 1458, path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0
     current outbound spi: 0xCA8E7D53(3398335827)
     PFS (Y/N): N, DH group: none
          
     inbound esp sas:
      spi: 0xE0B1BF6B(3769745259)
        transform: esp-256-aes esp-sha-hmac ,
        in use settings ={Transport, }
        conn id: 2009, flow_id: Onboard VPN:9, sibling_flags 80000000, crypto map: Tunnel1-head-0
        sa timing: remaining key lifetime (k/sec): (4251213/3468)
        IV size: 16 bytes
        replay detection support: Y
        Status: ACTIVE(ACTIVE)
          
     inbound ah sas:
          
     inbound pcp sas:
          
     outbound esp sas:
      spi: 0xCA8E7D53(3398335827)
        transform: esp-256-aes esp-sha-hmac ,
        in use settings ={Transport, }
        conn id: 2010, flow_id: Onboard VPN:10, sibling_flags 80000000, crypto map: Tunnel1-head-0
        sa timing: remaining key lifetime (k/sec): (4251213/3468)
        IV size: 16 bytes
        replay detection support: Y
        Status: ACTIVE(ACTIVE)
          
     outbound ah sas:
          
     outbound pcp sas:
 
SiteB#show crypto session remote 192.168.1.1 detail
Crypto session current status

Code: C - IKE Configuration mode, D - Dead Peer Detection     
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation     
X - IKE Extended Authentication, F - IKE Fragmentation
R - IKE Auto Reconnect

Interface: Tunnel1
Profile: IKEv2-Profile-1
Uptime: 00:02:33
Session status: UP-ACTIVE     
Peer: 192.168.1.1 port 500 fvrf: internet ivrf: local
      Phase1_id: 192.168.1.1
      Desc: (none)
  Session ID: 4  
  IKEv2 SA: local 192.168.2.1/500 remote 192.168.1.1/500 Active
          Capabilities:(none) connid:1 lifetime:23:57:27
  IPSEC FLOW: permit 47 host 192.168.2.1 host 192.168.1.1
        Active SAs: 2, origin: crypto map
        Inbound:  #pkts dec'ed 25 drop 0 life (KB/Sec) 4251213/3447
        Outbound: #pkts enc'ed 25 drop 0 life (KB/Sec) 4251213/3447

Risoluzione dei problemi

Le informazioni contenute in questa sezione permettono di risolvere i problemi relativi alla configurazione. Viene visualizzato anche l'output di esempio del comando debug.

Comandi per la risoluzione dei problemi

Nota: consultare le informazioni importanti sui comandi di debug prima di usare i comandi di debug. Se sul router sono configurati più tunnel, è possibile utilizzare la seguente condizione:

Debug della condizione di crittografia peer ipv4 <x.x.x.x> (dove x.x.x.x è l'indirizzo IP del peer remoto)
Errore debug crypto ikev2
Debug interno crypto ikev2
Debug pacchetto ikev2 di crittografia

Output di esempio del comando debug

SiteA Debugs :

*Jul 16 05:30:50.731: IKEv2: Got a packet from dispatcher
*Jul 16 05:30:50.731: IKEv2: Processing an item off the pak queue
*Jul 16 05:30:50.731: IKEv2-INTERNAL:% Getting preshared key by address 192.168.2.1
*Jul 16 05:30:50.731: IKEv2-INTERNAL:Adding Proposal default to toolkit policy
*Jul 16 05:30:50.731: IKEv2-INTERNAL:(1): Choosing IKE profile IKEv2-Profile-1
*Jul 16 05:30:50.731: IKEv2-INTERNAL:New ikev2 sa request admitted
*Jul 16 05:30:50.731: IKEv2-INTERNAL:Incrementing outgoing negotiating sa count by one
 
*Jul 16 05:30:50.731: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: IDLE Event: EV_INIT_SA
*Jul 16 05:30:50.731: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: I_BLD_INIT Event: EV_GET_IKE_POLICY
*Jul 16 05:30:50.731: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: I_BLD_INIT Event: EV_SET_POLICY
*Jul 16 05:30:50.731: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Setting configured policies
*Jul 16 05:30:50.731: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: I_BLD_INIT Event: EV_CHK_AUTH4PKI
*Jul 16 05:30:50.731: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: I_BLD_INIT Event: EV_GEN_DH_KEY
*Jul 16 05:30:50.791: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: I_BLD_INIT Event: EV_NO_EVENT
*Jul 16 05:30:50.791: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: I_BLD_INIT Event: EV_OK_RECD_DH_PUBKEY_RESP
*Jul 16 05:30:50.791: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Action: Action_Null
*Jul 16 05:30:50.791: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: I_BLD_INIT Event: EV_GET_CONFIG_MODE
*Jul 16 05:30:50.791: IKEv2-INTERNAL:No config data to send to toolkit:
*Jul 16 05:30:50.791: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=0000000000000000 (I) MsgID = 0 CurState: I_BLD_INIT Event: EV_BLD_MSG
*Jul 16 05:30:50.791: IKEv2-INTERNAL:Construct Vendor Specific Payload: DELETE-REASON
*Jul 16 05:30:50.791: IKEv2-INTERNAL:Construct Vendor Specific Payload: CISCOVPN-REV-02
*Jul 16 05:30:50.791: IKEv2-INTERNAL:Sending DRU Handshake
*Jul 16 05:30:50.791: IKEv2-INTERNAL:(1): Sending custom vendor id : CISCO-DYNAMIC-ROUTE
*Jul 16 05:30:50.791: IKEv2-INTERNAL:Construct Vendor Specific Payload: (CUSTOM)
*Jul 16 05:30:50.791: IKEv2-INTERNAL:Construct Vendor Specific Payload: (CUSTOM)
*Jul 16 05:30:50.791: IKEv2-INTERNAL:Construct Notify Payload: NAT_DETECTION_SOURCE_IP
*Jul 16 05:30:50.791: IKEv2-INTERNAL:Construct Notify Payload: NAT_DETECTION_DESTINATION_IP
 
*Jul 16 05:30:50.795: IKEv2-PAK:(SESSION ID = 3,SA ID = 1):Next payload: SA, version: 2.0 Exchange type: IKE_SA_INIT, flags: INITIATOR Message id: 0, length: 550
Payload contents:
SA  Next payload: KE, reserved: 0x0, length: 144
  last proposal: 0x0, reserved: 0x0, length: 140
  Proposal: 1, Protocol id: IKE, SPI size: 0, #trans: 15    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: SHA512
    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: SHA384
    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: SHA256
    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: SHA1
    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: MD5
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA512
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA384
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA256
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA96
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: MD596
    last transform: 0x3, reserved: 0x0: length: 8
    type: 4, reserved: 0x0, id: DH_GROUP_1536_MODP/Group 5
    last transform: 0x0, reserved: 0x0: length: 8
    type: 4, reserved: 0x0, id: DH_GROUP_1024_MODP/Group 2
KE  Next payload: N, reserved: 0x0, length: 200
    DH group: 5, Reserved: 0x0
N  Next payload: VID, reserved: 0x0, length: 36
VID  Next payload: VID, reserved: 0x0, length: 23 
VID  Next payload: VID, reserved: 0x0, length: 19
VID  Next payload: VID, reserved: 0x0, length: 23
VID  Next payload: NOTIFY, reserved: 0x0, length: 21
NOTIFY(NAT_DETECTION_SOURCE_IP)  Next payload: NOTIFY, reserved: 0x0, length: 28
    Security protocol id: Unknown - 0, spi size: 0, type: NAT_DETECTION_SOURCE_IP
NOTIFY(NAT_DETECTION_DESTINATION_IP)  Next payload: NONE, reserved: 0x0, length: 28
    Security protocol id: Unknown - 0, spi size: 0, type: NAT_DETECTION_DESTINATION_IP
 

*Jul 16 05:30:50.931: IKEv2-INTERNAL:Got a packet from dispatcher
*Jul 16 05:30:50.931: IKEv2-INTERNAL:Processing an item off the pak queue
 
*Jul 16 05:30:50.939: IKEv2-PAK:(SESSION ID = 3,SA ID = 1):Next payload: SA, version: 2.0 Exchange type: IKE_SA_INIT, flags: RESPONDER MSG-RESPONSE Message id: 0, length: 431
Payload contents:
SA  Next payload: KE, reserved: 0x0, length: 48
  last proposal: 0x0, reserved: 0x0, length: 44
  Proposal: 1, Protocol id: IKE, SPI size: 0, #trans: 4    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: SHA512
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA512
    last transform: 0x0, reserved: 0x0: length: 8
    type: 4, reserved: 0x0, id: DH_GROUP_1536_MODP/Group 5
KE  Next payload: N, reserved: 0x0, length: 200
    DH group: 5, Reserved: 0x0
N  Next payload: VID, reserved: 0x0, length: 36
 
*Jul 16 05:30:50.939: IKEv2-INTERNAL:Parse Vendor Specific Payload: CISCO-DELETE-REASON VID  Next payload: VID, reserved: 0x0, length: 23
 
*Jul 16 05:30:50.939: IKEv2-INTERNAL:Parse Vendor Specific Payload: CISCOVPN-REV VID  Next payload: VID, reserved: 0x0, length: 19
 
*Jul 16 05:30:50.939: IKEv2-INTERNAL:Parse Vendor Specific Payload: (CUSTOM) VID  Next payload: NOTIFY, reserved: 0x0, length: 21
 
*Jul 16 05:30:50.939: IKEv2-INTERNAL:Parse Notify Payload: NAT_DETECTION_SOURCE_IP NOTIFY(NAT_DETECTION_SOURCE_IP)  Next payload: NOTIFY, reserved: 0x0, length: 28
    Security protocol id: Unknown - 0, spi size: 0, type: NAT_DETECTION_SOURCE_IP
 
*Jul 16 05:30:50.939: IKEv2-INTERNAL:Parse Notify Payload: NAT_DETECTION_DESTINATION_IP NOTIFY(NAT_DETECTION_DESTINATION_IP)  Next payload: NONE, reserved: 0x0, length: 28
    Security protocol id: Unknown - 0, spi size: 0, type: NAT_DETECTION_DESTINATION_IP
 
*Jul 16 05:30:50.939: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_WAIT_INIT Event: EV_RECV_INIT
*Jul 16 05:30:50.939: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Processing IKE_SA_INIT message
*Jul 16 05:30:50.939: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_PROC_INIT Event: EV_CHK4_NOTIFY
*Jul 16 05:30:50.939: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_PROC_INIT Event: EV_VERIFY_MSG
*Jul 16 05:30:50.939: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_PROC_INIT Event: EV_PROC_MSG
*Jul 16 05:30:50.939: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_PROC_INIT Event: EV_DETECT_NAT
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Process NAT discovery notify
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Processing nat detect src notify
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Remote address matched
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Processing nat detect dst notify
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Local address matched
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):No NAT found
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_PROC_INIT Event: EV_CHK_NAT_T
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_PROC_INIT Event: EV_CHK_CONFIG_MODE
*Jul 16 05:30:50.943: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: INIT_DONE Event: EV_GEN_DH_SECRET
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: INIT_DONE Event: EV_NO_EVENT
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: INIT_DONE Event: EV_OK_RECD_DH_SECRET_RESP
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Action: Action_Null
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: INIT_DONE Event: EV_GEN_SKEYID
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Generate skeyid
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: INIT_DONE Event: EV_DONE
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Cisco DeleteReason Notify is enabled
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: INIT_DONE Event: EV_CHK4_ROLE
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_BLD_AUTH Event: EV_GET_CONFIG_MODE
*Jul 16 05:30:51.019: IKEv2-INTERNAL:Sending config data to toolkit
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_BLD_AUTH Event: EV_CHK_EAP
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_BLD_AUTH Event: EV_GEN_AUTH
*Jul 16 05:30:51.019: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_BLD_AUTH Event: EV_CHK_AUTH_TYPE
*Jul 16 05:30:51.023: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_BLD_AUTH Event: EV_OK_AUTH_GEN
*Jul 16 05:30:51.023: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 0 CurState: I_BLD_AUTH Event: EV_SEND_AUTH
*Jul 16 05:30:51.023: IKEv2-INTERNAL:Construct Vendor Specific Payload: CISCO-GRANITE
*Jul 16 05:30:51.023: IKEv2-INTERNAL:Construct Notify Payload: INITIAL_CONTACT
*Jul 16 05:30:51.023: IKEv2-INTERNAL:Construct Notify Payload: USE_TRANSPORT_MODE
*Jul 16 05:30:51.023: IKEv2-INTERNAL:Construct Notify Payload: SET_WINDOW_SIZE
*Jul 16 05:30:51.023: IKEv2-INTERNAL:Construct Notify Payload: ESP_TFC_NO_SUPPORT
*Jul 16 05:30:51.023: IKEv2-INTERNAL:Construct Notify Payload: NON_FIRST_FRAGS
Payload contents:
VID  Next payload: IDi, reserved: 0x0, length: 20
IDi  Next payload: AUTH, reserved: 0x0, length: 12
    Id type: IPv4 address, Reserved: 0x0 0x0
AUTH  Next payload: CFG, reserved: 0x0, length: 72
    Auth method PSK, reserved: 0x0, reserved 0x0
CFG  Next payload: SA, reserved: 0x0, length: 304
    cfg type: CFG_REQUEST, reserved: 0x0, reserved: 0x0
*Jul 16 05:30:51.023:  SA  Next payload: TSi, reserved: 0x0, length: 44
  last proposal: 0x0, reserved: 0x0, length: 40
Proposal: 1, Protocol id: ESP, SPI size: 4, #trans: 3    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA96
    last transform: 0x0, reserved: 0x0: length: 8
    type: 5, reserved: 0x0, id: Don't use ESN
TSi  Next payload: TSr, reserved: 0x0, length: 24
    Num of TSs: 1, reserved 0x0, reserved 0x0
    TS type: TS_IPV4_ADDR_RANGE, proto id: 47, length: 16
    start port: 0, end port: 65535
    start addr: 192.168.1.1, end addr: 192.168.1.1
TSr  Next payload: NOTIFY, reserved: 0x0, length: 24
    Num of TSs: 1, reserved 0x0, reserved 0x0
    TS type: TS_IPV4_ADDR_RANGE, proto id: 47, length: 16
    start port: 0, end port: 65535
    start addr: 192.168.2.1, end addr: 192.168.2.1
NOTIFY(INITIAL_CONTACT)  Next payload: NOTIFY, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: INITIAL_CONTACT
NOTIFY(USE_TRANSPORT_MODE)  Next payload: NOTIFY, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: USE_TRANSPORT_MODE
NOTIFY(SET_WINDOW_SIZE)  Next payload: NOTIFY, reserved: 0x0, length: 12
    Security protocol id: Unknown - 0, spi size: 0, type: SET_WINDOW_SIZE
NOTIFY(ESP_TFC_NO_SUPPORT)  Next payload: NOTIFY, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: ESP_TFC_NO_SUPPORT
NOTIFY(NON_FIRST_FRAGS)  Next payload: NONE, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: NON_FIRST_FRAGS
 
*Jul 16 05:30:51.023: IKEv2-PAK:(SESSION ID = 3,SA ID = 1):Next payload: ENCR, version: 2.0 Exchange type: IKE_AUTH, flags: INITIATOR Message id: 1, length: 640
Payload contents:
ENCR  Next payload: VID, reserved: 0x0, length: 612
 
*Jul 16 05:30:51.023: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 1 CurState: I_WAIT_AUTH Event: EV_NO_EVENT
 
*Jul 16 05:30:51.023: IKEv2-INTERNAL:Got a packet from dispatcher
*Jul 16 05:30:51.023: IKEv2-INTERNAL:Processing an item off the pak queue

*Jul 16 05:30:51.107: IKEv2-PAK:(SESSION ID = 3,SA ID = 1):Next payload: ENCR, version: 2.0 Exchange type: IKE_AUTH, flags: RESPONDER MSG-RESPONSE Message id: 1, length: 320
Payload contents:
 
*Jul 16 05:30:51.111: IKEv2-INTERNAL:Parse Vendor Specific Payload: (CUSTOM) VID  Next payload: IDr, reserved: 0x0, length: 20
IDr  Next payload: AUTH, reserved: 0x0, length: 12
    Id type: IPv4 address, Reserved: 0x0 0x0
AUTH  Next payload: SA, reserved: 0x0, length: 72
    Auth method PSK, reserved: 0x0, reserved 0x0
SA  Next payload: TSi, reserved: 0x0, length: 44
  last proposal: 0x0, reserved: 0x0, length: 40
  Proposal: 1, Protocol id: ESP, SPI size: 4, #trans: 3    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA96
    last transform: 0x0, reserved: 0x0: length: 8
    type: 5, reserved: 0x0, id: Don't use ESN
TSi  Next payload: TSr, reserved: 0x0, length: 24
    Num of TSs: 1, reserved 0x0, reserved 0x0
    TS type: TS_IPV4_ADDR_RANGE, proto id: 47, length: 16
    start port: 0, end port: 65535
    start addr: 192.168.1.1, end addr: 192.168.1.1
TSr  Next payload: NOTIFY, reserved: 0x0, length: 24
    Num of TSs: 1, reserved 0x0, reserved 0x0
    TS type: TS_IPV4_ADDR_RANGE, proto id: 47, length: 16
    start port: 0, end port: 65535
    start addr: 192.168.2.1, end addr: 192.168.2.1
 
*Jul 16 05:30:51.111: IKEv2-INTERNAL:Parse Notify Payload: USE_TRANSPORT_MODE NOTIFY(USE_TRANSPORT_MODE)  Next payload: NOTIFY, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: USE_TRANSPORT_MODE
 
*Jul 16 05:30:51.111: IKEv2-INTERNAL:Parse Notify Payload: SET_WINDOW_SIZE NOTIFY(SET_WINDOW_SIZE)  Next payload: NOTIFY, reserved: 0x0, length: 12
    Security protocol id: Unknown - 0, spi size: 0, type: SET_WINDOW_SIZE
 
*Jul 16 05:30:51.111: IKEv2-INTERNAL:Parse Notify Payload: ESP_TFC_NO_SUPPORT NOTIFY(ESP_TFC_NO_SUPPORT)  Next payload: NOTIFY, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: ESP_TFC_NO_SUPPORT
 
*Jul 16 05:30:51.111: IKEv2-INTERNAL:Parse Notify Payload: NON_FIRST_FRAGS NOTIFY(NON_FIRST_FRAGS)  Next payload: NONE, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: NON_FIRST_FRAGS
 
*Jul 16 05:30:51.111: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 1 CurState: I_WAIT_AUTH Event: EV_RECV_AUTH
*Jul 16 05:30:51.111: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):Action: Action_Null
*Jul 16 05:30:51.123: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 1 CurState: READY Event: EV_CHK_IKE_ONLY
*Jul 16 05:30:51.123: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (I) MsgID = 1 CurState: READY Event: EV_I_OK
*Jul 16 05:30:52.011: SM Trace-> SA: I_SPI=34CDD54C620910B0 R_SPI=F1A0F4AB68B75F00 (R) MsgID = 1 CurState: AUTH_DONE Event: EV_CHK4_ROLE
*Jul 16 05:30:52.027: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=34CDD54C620910B0 R_SPI=F1A0F4AB68B75F00 (R) MsgID = 1 CurState: READY Event: EV_R_OK
*Jul 16 05:30:52.027: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=34CDD54C620910B0 R_SPI=F1A0F4AB68B75F00 (R) MsgID = 1 CurState: READY Event: EV_NO_E
*Jul 16 05:30:52.027: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=34CDD54C620910B0 R_SPI=F1A0F4AB68B75F00 (R) MsgID = 1 CurState:I_PROC_AUTH: EV_VERIFY_AUTH
*Jul 16 05:30:52.027: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=34CDD54C620910B0 R_SPI=F1A0F4AB68B75F00 (R) MsgID = 1 CurState:I_PROC_AUTH EVENT:EV_NOTIFY_AUTH_DONE
*Jul 16 05:30:52.027: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=34CDD54C620910B0 R_SPI=F1A0F4AB68B75F00 (R) MsgID = 1 CurState:AUTH_DONE Event EV_CHK4_ROLE

*Jul 16 05:30:52.027: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=34CDD54C620910B0 R_SPI=F1A0F4AB68B75F00 (R) MsgID = 1 CurState: READYEvent: EV_CHK_IKE_ONLY
*Jul 16 05:30:52.027: IKEv2-INTERNAL:(SESSION ID = 3,SA ID = 1):SM Trace-> SA: I_SPI=34CDD54C620910B0 R_SPI=F1A0F4AB68B75F00 (R) MsgID = 1 CurState: READYEvent: EV_I_OK

SiteB Debugs:

*Jul 16 06:01:45.231: IKEv2-INTERNAL:Got a packet from dispatcher
*Jul 16 06:01:45.231: IKEv2-INTERNAL:Processing an item off the pak queue

*Jul 16 06:01:45.231: IKEv2-INTERNAL:New ikev2 sa request admitted
*Jul 16 06:01:45.231: IKEv2-INTERNAL:Incrementing incoming negotiating sa count by one
 
*Jul 16 06:01:45.231: IKEv2-PAK:Next payload: SA, version: 2.0 Exchange type: IKE_SA_INIT, flags: INITIATOR Message id: 0, length: 550
Payload contents:
SA  Next payload: KE, reserved: 0x0, length: 144
  last proposal: 0x0, reserved: 0x0, length: 140
  Proposal: 1, Protocol id: IKE, SPI size: 0, #trans: 15    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: SHA1
    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: l    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: MD5
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA512
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA384
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA256
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA96
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: MD596
    last transform: 0x3, reserved: 0x0: length: 8
    type: 4, reserved: 0x0, id: DH_GROUP_1536_MODP/Group 5
    type: 2, reserved: 0x0, id: SHA512
    last trans0x0, length: 23
KE  Next payload: N, reserved: 0x0, length: 200
    DH group: 5, Reserved: 0x0
N  Next payload: VID, reserved: 0x0, length: 36
 
*Jul 16 06:01:45.231: IKEv2-INTERNAL:Parse Vendor Specific Payload: CISCOVPN-REV VID  Next payload: VID, reserved: 0x0, length: 19
*Jul 16 06:01:45.231: IKEv2-INTERNAL:Parse Vendor Specific Payload: (CUSTOM) VID  Next payload: VID, reserved: 0x0, length: 23
*Jul 16 06:01:45.231: IKEv2-INTERNAL:form: 0x3, reserved: 0x0: length: 8

*Jul 16 06:01:45.231: IKEv2-INTERNAL:Parse Vendor Specific Payload: CISCO-DELETE-REASON VID  Next payload: VID, reserved: 
 
*Jul 16 06:01:45.231: IKEv2-INTERNAL:Parse Notify Payload: NAT_DETECTION_SOURCE_IP NOTIFY(NAT_DETECTION_SOURCE_IP)  Next payload: NOTIFY, reserved: 0x0, length: 28
    Security protocol id: Unknown - 0, spi size: 0, type: NAT_DETECTION_SOURCE_IP
 
*Jul 16 06:01:45.231: IKEv2-INTERNAL:Parse Notify Payload: NAT_DETECTION_DESTINATION_IP NOTIFY(NAT_DETECTION_DESTINATION_IP)  Next payload: NONE, reserved: 0x0, length: 28
    Security protocol id: Unknown - 0, spi size: 0, type: NAT_DETECTION_DESTINATION_IP
 
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: IDLE Event: EV_RECV_INIT
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_INIT Event: EV_VERIFY_MSG
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_INIT Event: EV_INSERT_SA
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_INIT Event: EV_GET_IKE_POLICY
*Jul 16 06:01:45.231: IKEv2-INTERNAL:Adding Proposal default to toolkit policy
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_INIT Event: EV_PROC_MSG
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_INIT Event: EV_DETECT_NAT
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Process NAT discovery notify
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Processing nat detect src notify
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Remote address matched
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Processing nat detect dst notify
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Local address matched
*Jul 16 06:01:45.231: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):No NAT found
*Jul 16 06:01:45.235: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_INIT Event: EV_CHK_CONFIG_MODE
*Jul 16 06:01:45.235: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_SET_POLICY
*Jul 16 06:01:45.235: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Setting configured policies
*Jul 16 06:01:45.235: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_CHK_AUTH4PKI
*Jul 16 06:01:45.235: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_GEN_DH_KEY
*Jul 16 06:01:45.295: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_NO_EVENT
*Jul 16 06:01:45.295: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_OK_RECD_DH_PUBKEY_RESP
*Jul 16 06:01:45.295: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Action: Action_Null
*Jul 16 06:01:45.295: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_GEN_DH_SECRET
*Jul 16 06:01:45.371: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_NO_EVENT
*Jul 16 06:01:45.371: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_OK_RECD_DH_SECRET_RESP
*Jul 16 06:01:45.371: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Action: Action_Null
*Jul 16 06:01:45.371: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_GEN_SKEYID
*Jul 16 06:01:45.371: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Generate skeyid
*Jul 16 06:01:45.371: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_GET_CONFIG_MODE
*Jul 16 06:01:45.371: IKEv2-INTERNAL:No config data to send to toolkit:
*Jul 16 06:01:45.371: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_BLD_INIT Event: EV_BLD_MSG
*Jul 16 06:01:45.371: IKEv2-INTERNAL:Construct Vendor Specific Payload: DELETE-REASON
*Jul 16 06:01:45.371: IKEv2-INTERNAL:Construct Vendor Specific Payload: CISCOVPN-REV-02
*Jul 16 06:01:45.371: IKEv2-INTERNAL:Construct Vendor Specific Payload: (CUSTOM)
*Jul 16 06:01:45.371: IKEv2-INTERNAL:Construct Notify Payload: NAT_DETECTION_SOURCE_IP
*Jul 16 06:01:45.371: IKEv2-INTERNAL:Construct Notify Payload: NAT_DETECTION_DESTINATION_IP
 
*Jul 16 06:01:45.371: IKEv2-PAK:(SESSION ID = 4,SA ID = 1):Next payload: SA, version: 2.0 Exchange type: IKE_SA_INIT, flags: RESPONDER MSG-RESPONSE Message id: 0, length: 431
Payload contents:
SA  Next payload: KE, reserved: 0x0, length: 48
  last proposal: 0x0, reserved: 0x0, length: 44
  Proposal: 1, Protocol id: IKE, SPI size: 0, #trans: 4    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 8
    type: 2, reserved: 0x0, id: SHA512
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA512
    last transform: 0x0, reserved: 0x0: length: 8
    type: 4, reserved: 0x0, id: DH_GROUP_1536_MODP/Group 5
KE  Next payload: N, reserved: 0x0, length: 200
    DH group: 5, Reserved: 0x0
N  Next payload: VID, reserved: 0x0, length: 36
VID  Next payload: VID, reserved: 0x0, length: 23
VID  Next payload: VID, reserved: 0x0, length: 19
VID  Next payload: NOTIFY, reserved: 0x0, length: 21
NOTIFY(NAT_DETECTION_SOURCE_IP)  Next payload: NOTIFY, reserved: 0x0, length: 28
    Security protocol id: Unknown - 0, spi size: 0, type: NAT_DETECTION_SOURCE_IP
NOTIFY(NAT_DETECTION_DESTINATION_IP)  Next payload: NONE, reserved: 0x0, length: 28
    Security protocol id: Unknown - 0, spi size: 0, type: NAT_DETECTION_DESTINATION_IP
 
*Jul 16 06:01:45.375: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: INIT_DONE Event: EV_DONE
*Jul 16 06:01:45.375: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Cisco DeleteReason Notify is enabled
*Jul 16 06:01:45.375: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: INIT_DONE Event: EV_CHK4_ROLE
*Jul 16 06:01:45.375: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: INIT_DONE Event: EV_START_TMR
*Jul 16 06:01:45.375: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 0 CurState: R_WAIT_AUTH Event: EV_NO_EVENT
*Jul 16 06:01:45.375: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):New ikev2 sa request admitted
*Jul 16 06:01:45.375: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Incrementing outgoing negotiating sa count by one
 
*Jul 16 06:01:45.390: IKEv2-INTERNAL:Got a packet from dispatcher
*Jul 16 06:01:45.390: IKEv2-INTERNAL:Processing an item off the pak queue

*Jul 16 06:01:45.375: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Next payload: ENCR, version: 2.0 Exchange type: IKE_AUTH, flags: INITIATOR Message id: 1, length: 556 
Payload contents: 
*Jul 16 06:01:45.375: IKEv2-INTERNAL:Parse Vendor Specific Payload: (CUSTOM) VID  Next payload: IDi, reserved: 0x0, length: 20
Payload contents:
IDi  Next payload: AUTH, reserved: 0x0, length: 12
    Id type: IPv4 address, Reserved: 0x0 0x0
AUTH  Next payload: CFG, reserved: 0x0, length: 72
    Auth method PSK, reserved: 0x0, reserved 0x0
CFG  Next payload: SA, reserved: 0x0, length: 304
    cfg type: CFG_REQUEST, reserved: 0x0, reserved: 0x0
 SA  Next payload: TSi, reserved: 0x0, length: 44
  last proposal: 0x0, reserved: 0x0, length: 40
Proposal: 1, Protocol id: ESP, SPI size: 4, #trans: 3    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA96
    last transform: 0x0, reserved: 0x0: length: 8
    type: 5, reserved: 0x0, id: Don't use ESN
TSi  Next payload: TSr, reserved: 0x0, length: 24
    Num of TSs: 1, reserved 0x0, reserved 0x0
    TS type: TS_IPV4_ADDR_RANGE, proto id: 47, length: 16
    start port: 0, end port: 65535
    start addr: 192.168.1.1, end addr: 192.168.1.1
TSr  Next payload: NOTIFY, reserved: 0x0, length: 24
    Num of TSs: 1, reserved 0x0, reserved 0x0
    TS type: TS_IPV4_ADDR_RANGE, proto id: 47, length: 16
    start port: 0, end port: 65535
    start addr: 192.168.2.1, end addr: 192.168.2.1
 
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_RECV_AUTH
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_CHK_NAT_T
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_PROC_ID
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Received valid parameteres in process id
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_CHK_IF_PEER_CERT_NEEDS_TO_BE_FETCHED_FOR_PROF_SEL
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_GET_POLICY_BY_PEERID
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_SET_POLICY
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Setting configured policies
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_VERIFY_POLICY_BY_PEERID
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_CHK_AUTH4EAP
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_WAIT_AUTH Event: EV_CHK_POLREQEAP
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_CHK_AUTH_TYPE
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_GET_PRESHR_KEY
*Jul 16 06:01:45.463: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_VERIFY_AUTH
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_CHK4_IC
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace->SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_CHK_REDIRECT
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Redirect check is not needed, skipping it
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_NOTIFY_AUTH_DONE
*Jul 16 06:01:45.467: IKEv2-INTERNAL:AAA group authorization is not configured
*Jul 16 06:01:45.467: IKEv2-INTERNAL:AAA user authorization is not configured
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_CHK_CONFIG_MODE
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_SET_RECD_CONFIG_MODE
*Jul 16 06:01:45.467: IKEv2-INTERNAL:Received config data from toolkit:
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_CHK_GKM
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_CHK_DIKE
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_PROC_SA_TS
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_NO_EVENT
*Jul 16 06:01:45.467: IPSEC(ipsec_get_crypto_session_id): Invalid Payload Id
*Jul 16 06:01:45.467: IKEv2-INTERNAL:IPSEC accepted group 0
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_POLICY_NEGOTIATED
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):Action: Action_Null
*Jul 16 06:01:45.467: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_VERIFY_AUTH Event: EV_GET_CONFIG_MODE
*Jul 16 06:01:45.471: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_BLD_AUTH Event: EV_MY_AUTH_METHOD
*Jul 16 06:01:45.471: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_BLD_AUTH Event: EV_GET_PRESHR_KEY
*Jul 16 06:01:45.471: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_BLD_AUTH Event: EV_GEN_AUTH
*Jul 16 06:01:45.471: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_BLD_AUTH Event: EV_CHK4_SIGN
*Jul 16 06:01:45.471: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_BLD_AUTH Event: EV_OK_AUTH_GEN
*Jul 16 06:01:45.471: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: R_BLD_AUTH Event: EV_SEND_AUTH
*Jul 16 06:01:45.471: IKEv2-INTERNAL:Construct Vendor Specific Payload: CISCO-GRANITE
*Jul 16 06:01:45.471: IKEv2-INTERNAL:Construct Notify Payload: USE_TRANSPORT_MODE
*Jul 16 06:01:45.471: IKEv2-INTERNAL:Construct Notify Payload: SET_WINDOW_SIZE
*Jul 16 06:01:45.471: IKEv2-INTERNAL:Construct Notify Payload: ESP_TFC_NO_SUPPORT
*Jul 16 06:01:45.471: IKEv2-INTERNAL:Construct Notify Payload: NON_FIRST_FRAGS
 
*Jul 16 06:01:45.471: IKEv2-PAK:(SESSION ID = 4,SA ID = 1):Next payload: ENCR, version: 2.0 Exchange type: IKE_AUTH, flags: RESPONDER MSG-RESPONSE Message id: 1, length: 320
Payload contents:
VID  Next payload: IDr, reserved: 0x0, length: 20
IDr  Next payload: AUTH, reserved: 0x0, length: 12
    Id type: IPv4 address, Reserved: 0x0 0x0
AUTH  Next payload: SA, reserved: 0x0, length: 72
    Auth method PSK, reserved: 0x0, reserved 0x0
SA  Next payload: TSi, reserved: 0x0, length: 44
  last proposal: 0x0, reserved: 0x0, length: 40
  Proposal: 1, Protocol id: ESP, SPI size: 4, #trans: 3    last transform: 0x3, reserved: 0x0: length: 12
    type: 1, reserved: 0x0, id: AES-CBC
    last transform: 0x3, reserved: 0x0: length: 8
    type: 3, reserved: 0x0, id: SHA96
    last transform: 0x0, reserved: 0x0: length: 8
    type: 5, reserved: 0x0, id: Don't use ESN
TSi  Next payload: TSr, reserved: 0x0, length: 24
    Num of TSs: 1, reserved 0x0, reserved 0x0
    TS type: TS_IPV4_ADDR_RANGE, proto id: 47, length: 16
    start port: 0, end port: 65535
    start addr: 192.168.1.1, end addr: 192.168.1.1
TSr  Next payload: NOTIFY, reserved: 0x0, length: 24
    Num of TSs: 1, reserved 0x0, reserved 0x0
    TS type: TS_IPV4_ADDR_RANGE, proto id: 47, length: 16
    start port: 0, end port: 65535
    start addr: 192.168.2.1, end addr: 192.168.2.1
NOTIFY(USE_TRANSPORT_MODE)  Next payload: NOTIFY, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: USE_TRANSPORT_MODE
NOTIFY(SET_WINDOW_SIZE)  Next payload: NOTIFY, reserved: 0x0, length: 12
    Security protocol id: Unknown - 0, spi size: 0, type: SET_WINDOW_SIZE
NOTIFY(ESP_TFC_NO_SUPPORT)  Next payload: NOTIFY, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: ESP_TFC_NO_SUPPORT
NOTIFY(NON_FIRST_FRAGS)  Next payload: NONE, reserved: 0x0, length: 8
    Security protocol id: Unknown - 0, spi size: 0, type: NON_FIRST_FRAGS
 
ENCR  Next payload: VID, reserved: 0x0, length: 292
*Jul 16 06:01:45.479: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: AUTH_DONE Event: EV_CHECK_DUPE
*Jul 16 06:01:45.479: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: AUTH_DONE Event: EV_CHK4_ROLE
*Jul 16 06:01:45.479: IKEv2-INTERNAL:(SESSION ID = 4,SA ID = 1):SM Trace-> SA: I_SPI=AA81AF8C052B480F R_SPI=53457A4ACA42FD10 (R) MsgID = 1 CurState: READY Event: EV_R_OK