Introduzione
In questo documento viene descritto come eliminare i database di rilevamento o reporting associati archiviati in Cisco Email Security Appliance (ESA) o Cisco Security Management Appliance (SMA).
Come si cancella il database di rilevamento o di report?
Database di rilevamento
Il database di rilevamento è costituito dai registri di rilevamento dell'accessorio. I log di rilevamento registrano le azioni associate ai processi del servizio di rilevamento. I log di verifica sono un sottoinsieme dei log di posta.
Attenzione: questo comando eliminerà tutti i dati di rilevamento e non può essere ripristinato.
Dalla CLI, usare diagnostic > tracking > deletedb per cancellare il database di rilevamento. Nessun commit necessario.
mylocal.esa> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- DISK_USAGE - Check Disk Usage.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
[]> tracking
Choose the operation you want to perform:
- DELETEDB - Reinitialize the tracking database.
- DEBUG - Gather debug information.
[]> deletedb
This command will delete all tracking data and cannot be aborted.
In some instances it may take several minutes to complete. Please
do not attempt a system restart until the command has returned.
Are you sure you want to continue? [N]> y
Deleting all tracking data.
Shutting down the Splunk daemon (this may take a few minutes)...
Splunk daemon shut down
Removing Splunk database...
Splunk database removed
Removing 'missing data' database...
Removing unparsed log files...
Unparsed log files removed
Rebuilding log file directory...
rebuilt log file directory
Restarting the Splunk daemon (this may take a few minutes)...
Splunk daemon started
Database di report
Il database di report è un database binario proprietario che contiene metriche cronologiche sul flusso di posta per l'accessorio.
Attenzione: questo comando eliminerà tutti i dati dei report e non può essere ripristinato.
Dalla CLI, usare diagnostica > creazione report > deletedb per cancellare il database Reporting. Nessun commit necessario.
myesa.local> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- DISK_USAGE - Check Disk Usage.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
[]> reporting
The reporting system is currently enabled.
Choose the operation you want to perform:
- DELETEDB - Reinitialize the reporting database.
- DISABLE - Disable the reporting system.
[]> deletedb
This command will delete all reporting data and cannot be aborted. In some instances
it may take several minutes to complete. Please do not attempt a system restart
until the command has returned. Are you sure you
want to continue? [N]> y
Shutting down reporting system......
Removing all reporting data. This may take several minutes.
The reporting system database has been reinitialized.
The reporting system is currently enabled.
Informazioni correlate
Feedback