Cisco VPN Client to VPN 3000 Concentrator con autenticazione IPSec SDI (versione server 3.3)
Sommario
Introduzione
Cisco VPN 3000 Concentrator può essere configurato per autenticare i client VPN Cisco tramite un server Security Dynamics International (SDI). Il concentratore VPN 3000 agisce come client SDI, comunicando con il server SDI sulla porta UDP (User Datagram Protocol) 5500. Nel documento seguente viene illustrato come verificare che il server SDI, VPN 3000 Concentrator e Cisco VPN Client funzionino correttamente e come combinare i componenti. Se il concentratore VPN 3000 non è stato ancora configurato, seguire la procedura descritta in Installazione e configurazione di VPN 3000 Concentrator senza SDI utilizzando l'interfaccia della riga di comando (CLI) per l'installazione e la configurazione iniziali. Se VPN 3000 Concentrator è stato configurato in precedenza, seguire la procedura per modificare la configurazione esistente (senza SDI).
Prerequisiti
Requisiti
Non sono previsti prerequisiti specifici per questo documento.
Componenti usati
Questa configurazione è stata sviluppata e testata utilizzando le versioni software e hardware riportate di seguito.
-
Server SDI 3.3 (UNIX e NT)
-
VPN 3000 Concentrator (2.5.2)
-
VPN Client 2.5.2.A
Le informazioni discusse in questo documento fanno riferimento a dispositivi usati in uno specifico ambiente di emulazione. Su tutti i dispositivi menzionati nel documento la configurazione è stata ripristinata ai valori predefiniti. Se la rete è operativa, valutare attentamente eventuali conseguenze derivanti dall'uso dei comandi.
Convenzioni
Per ulteriori informazioni sulle convenzioni usate, consultare il documento Cisco sulle convenzioni nei suggerimenti tecnici.
Premesse
Questo documento è relativo sia al client Cisco VPN 3000 (2.5.x) sia al client Cisco VPN (3.x). Con la versione 3.0 e successive è ora possibile configurare singoli server SDI per singoli gruppi anziché un server SDI definito a livello globale e utilizzato da tutti i gruppi. I gruppi per i quali non sono configurati server SDI singoli utilizzeranno il server SDI definito a livello globale.
Esistono tre tipi di nuove modalità PIN in SDI. VPN 3000 Concentrator supporta le prime due opzioni come mostrato di seguito.
-
L'utente sceglie il nuovo PIN.
-
Il server sceglie il nuovo PIN e ne informa gli utenti.
-
Il server sceglie il nuovo PIN e ne informa gli utenti; gli utenti possono modificare il PIN.
Configurazione
In questa sezione vengono presentate le informazioni necessarie per configurare le funzionalità descritte più avanti nel documento.
Nota: per ulteriori informazioni sui comandi menzionati in questo documento, usare lo strumento di ricerca dei comandi (solo utenti registrati).
Esempio di rete
Questo documento utilizza le impostazioni di rete mostrate nel diagramma sottostante.
Configurazioni
Installazione e configurazione di VPN 3000 Concentrator senza SDI
Abbiamo configurato VPN 3000 Concentrator per autenticare localmente un utente in un gruppo; eseguendo questa operazione prima di aggiungere l'interfaccia SDI, è possibile verificare il corretto funzionamento di IPSec tra Cisco VPN Client e VPN 3000 Concentrator. La configurazione di VPN 3000 Concentrator è stata cancellata sulla porta della console passando a Amministrazione > Riavvio del sistema > Pianifica riavvio > Riavvia con la configurazione di fabbrica/predefinita.
Dopo il riavvio, è stata eseguita la seguente configurazione iniziale:
| Configurazione VPN 3000 Concentrator |
|---|
Login: admin
Password:
Welcome to
Cisco Systems
VPN 3000 Concentrator Series
Command Line Interface
Copyright (C) 1998-2000 Cisco Systems, Inc.
-- : Set the time on your device. The correct time is very important,
-- : so that logging and accounting entries are accurate.
-- : Enter the system time in the following format:
-- : HH:MM:SS. Example 21:30:00 for 9:30 PM
> Time
Quick -> [ 13:02:39 ]
-- : Enter the date in the following format.
-- : MM/DD/YYYY Example 06/12/1999 for June 12th 1999.
> Date
Quick -> [ 10/09/2000 ]
-- : Set the time zone on your device. The correct time zone is very
-- : important so that logging and accounting entries are accurate.
-- : Enter the time zone using the hour offset from GMT:
-- : -12 : Kwajalein -11 : Samoa -10 : Hawaii -9 : Alaska
-- : -8 : PST -7 : MST -6 : CST -5 : EST
-- : -4 : Atlantic -3 : Brasilia -2 : Mid-Atlantic -1 : Azores
-- : 0 : GMT +1 : Paris +2 : Cairo +3 : Kuwait
-- : +4 : Abu Dhabi +5 : Karachi +6 : Almaty +7 : Bangkok
-- : +8 : Singapore +9 : Tokyo +10 : Sydney +11 : Solomon Is.
-- : +12 : Marshall Is.
> Time Zone
Quick -> [ -5 ] -5
1) Enable DST Support
2) Disable DST Support
Quick -> [ 1 ]
This table shows current IP addresses.
Interface IP Address/Subnet Mask MAC Address
-------------------------------------------------------------------------------
| Ethernet 1 - Private | 0.0.0.0/0.0.0.0 |
| Ethernet 2 - Public | 0.0.0.0/0.0.0.0 |
| Ethernet 3 - External | 0.0.0.0/0.0.0.0 |
-------------------------------------------------------------------------------
** An address is required for the private interface. **
> Enter IP Address
Quick Ethernet 1 -> [ 0.0.0.0 ] 10.31.1.59
Waiting for Network Initialization...
> Enter Subnet Mask
Quick Ethernet 1 -> [ 255.0.0.0 ] 255.255.255.0
1) Ethernet Speed 10 Mbps
2) Ethernet Speed 100 Mbps
3) Ethernet Speed 10/100 Mbps Auto Detect
Quick Ethernet 1 -> [ 3 ]
1) Enter Duplex - Half/Full/Auto
2) Enter Duplex - Full Duplex
3) Enter Duplex - Half Duplex
Quick Ethernet 1 -> [ 1 ]
1) Modify Ethernet 1 IP Address (Private)
2) Modify Ethernet 2 IP Address (Public)
3) Modify Ethernet 3 IP Address (External)
4) Configure Expansion Cards
5) Save changes to Config file
6) Continue
7) Exit
Quick -> 2
This table shows current IP addresses.
Interface IP Address/Subnet Mask MAC Address
-------------------------------------------------------------------------------
| Ethernet 1 - Private | 10.31.1.59/255.255.255.0 | 00.90.A4.00.1C.B4
| Ethernet 2 - Public | 0.0.0.0/0.0.0.0 |
| Ethernet 3 - External | 0.0.0.0/0.0.0.0 |
-------------------------------------------------------------------------------
> Enter IP Address
Quick Ethernet 2 -> [ 0.0.0.0 ] 172.18.124.134
> Enter Subnet Mask
Quick Ethernet 2 -> [ 255.255.0.0 ] 255.255.255.0
1) Ethernet Speed 10 Mbps
2) Ethernet Speed 100 Mbps
3) Ethernet Speed 10/100 Mbps Auto Detect
Quick Ethernet 2 -> [ 3 ]
1) Enter Duplex - Half/Full/Auto
2) Enter Duplex - Full Duplex
3) Enter Duplex - Half Duplex
Quick Ethernet 2 -> [ 1 ]
1) Modify Ethernet 1 IP Address (Private)
2) Modify Ethernet 2 IP Address (Public)
3) Modify Ethernet 3 IP Address (External)
4) Configure Expansion Cards
5) Save changes to Config file
6) Continue
7) Exit
Quick -> 6
-- : Assign a system name to this device.
> System Name
Quick -> vpn3000
-- : Specify a local DNS server, which lets you enter hostnames
-- : rather than IP addresses while configuring.
> DNS Server
Quick -> [ 0.0.0.0 ]
-- : Enter your Internet domain name; e.g., yourcompany.com
> Domain
Quick ->
> Default Gateway
Quick -> 172.18.124.1
-- : Configure protocols and encryption options.
-- : This table shows current protocol settings
PPTP | L2TP |
---------------------------------------------
| Enabled | Enabled |
| No Encryption Req | No Encryption Req |
---------------------------------------------
1) Enable PPTP
2) Disable PPTP
Quick -> [ 1 ]
1) PPTP Encryption Required
2) No Encryption Required
Quick -> [ 2 ]
1) Enable L2TP
2) Disable L2TP
Quick -> [ 1 ]
1) L2TP Encryption Required
2) No Encryption Required
Quick -> [ 2 ]
1) Enable IPSec
2) Disable IPSec
Quick -> [ 1 ]
-- : Configure address assignment for PPTP, L2TP and IPSec.
1) Enable Client Specified Address Assignment
2) Disable Client Specified Address Assignment
Quick -> [ 2 ]
1) Enable Per User Address Assignment
2) Disable Per User Address Assignment
Quick -> [ 2 ]
1) Enable DHCP Address Assignment
2) Disable DHCP Address Assignment
Quick -> [ 2 ]
1) Enable Configured Pool Address Assignment
2) Disable Configured Pool Address Assignment
Quick -> [ 2 ] 1
> Configured Pool Range Start Address
Quick -> 192.168.1.1
> Configured Pool Range End Address
Quick -> [ 0.0.0.0 ] 192.168.1.100
-- : Specify how to authenticate users
1) Internal Authentication Server
2) RADIUS Authentication Server
3) NT Domain Authentication Server
4) SDI Authentication Server
5) Continue
Quick -> [ 1 ] 1
Current Users
-------------------------------------------------------------------------------
No Users
-------------------------------------------------------------------------------
1) Add a User
2) Delete a User
3) Continue
Quick -> 1
> User Name
Quick -> 37297304
> Password
Quick -> *********
Verify -> *********
Current Users
-------------------------------------------------------------------------------
| 1. 37297304 | |
-------------------------------------------------------------------------------
1) Add a User
2) Delete a User
3) Continue
Quick -> 3
> IPSec Group Name
Quick -> vpn3000
> IPSec Group Password
Quick -> ********
Verify -> ********
-- : We strongly recommend that you change the password for user admin.
> Reset Admin Password
Quick -> [ ***** ]
Verify ->
1) Goto Main Configuration Menu
2) Save changes to Config file
3) Exit
Quick -> 2
1) Goto Main Configuration Menu
2) Save changes to Config file
3) Exit
Quick -> 3
Done
|
Modifica configurazione esistente (senza SDI)
Se VPN 3000 Concentrator è stato precedentemente configurato, per verificare le impostazioni di gruppo, utente e IPSec/IKE vengono utilizzate le schermate seguenti:
-
Utilizzare questa schermata per aggiungere un gruppo con autenticazione locale:
-
Utilizzare questa schermata per aggiungere un utente al gruppo con autenticazione locale:
-
Utilizzare la schermata di proposta IPSec > IKE per aggiungere le impostazioni IKE (le impostazioni visualizzate sono quelle predefinite del sistema):
Test di Cisco VPN Client e VPN 3000 Concentrator senza SDI
Dopo aver modificato la configurazione esistente sul concentratore VPN 3000, si installa il client VPN Cisco e si configura una nuova connessione che terminerà a 172.18.124.134 (l'interfaccia pubblica del concentratore). Le informazioni di accesso al nostro gruppo erano "vpn3000" (il nome del gruppo) e la password del gruppo era la password del gruppo. Quando abbiamo fatto clic su Connect, il nome utente era "37297304" (nome utente) e la password utente era la password per l'utente (memorizzata localmente sul VPN 3000 Concentrator; non è ancora presente nessun SDI). Per il debug IKE, IKEDBG, IKEDECODE, IPSEC, IPSECDBG, IPSECDECODE, vedere Buon debug IPSec con autenticazione locale.
Test funzionamento server SDI senza concentratore VPN 3000
UNIX (Solaris)
-
Sul server SDI, creare un account sditest usando lo strumento di amministrazione di Solaris.
La voce /etc/passwd dovrebbe avere il seguente aspetto:
sditest:x:76:10::/local/0/sditest:/local/0/opt/ace/prog/sdshell
Nota: i valori e i percorsi della home directory dell'utente e di "sdshell" dipendono dal sistema.
-
Assegnare un token a sditest.
-
Provare a collegarsi in modalità Telnet all'host UNIX come sditest. L'host richiede una password UNIX e il passcode. Dopo l'autenticazione, consente di accedere come host.
Microsoft Windows NT
-
Installare l'agente SecurSight.
-
Selezionare Programmi > SecurSight > Test di autenticazione.
Configurazione di SDI/User per la comunicazione con il concentratore VPN 3000
Per configurare SDI/User per la comunicazione con VPN 3000 Concentrator, attenersi alla procedura descritta di seguito.
-
Nella schermata SDI Server Edit Token, verificare che il token sia "Enabled" (Attivato) e non in modalità New PIN (Nuovo PIN).
-
Fare clic su Resynchronize Token e su Set PIN to Next Tokencode.
-
Nella schermata Modifica utente, assegnare un token all'utente e verificare che l'opzione "Consenti creazione PIN" non sia selezionata.
-
Fare clic su Attivazioni client e verificare che VPN 3000 Concentrator sia incluso.
Nota: il concentratore VPN 3000 è considerato un client del server SDI; la schermata seguente è quella relativa al server SDI Add/Edit Client. Poiché si tratta di un nuovo client, la casella Segreto nodo inviato è disattivata. Il server SDI non ha avuto la possibilità di inviare il file "node secret" al concentratore (questo file sarebbe visualizzato nella sezione Amministrazione > Gestione file > File come "SECURID"). Una volta completata l'autenticazione dalla VPN 3000, il file "node secret" viene visualizzato in VPN 3000 Concentrator e viene selezionata la casella "Sent Node Secret".
-
Fare clic su Attivazioni utente e verificare che l'utente sia incluso.
Configurazione e test di VPN 3000 Concentrator su SDI
Per configurare e provare VPN 3000 Concentrator su SDI, attenersi alla procedura descritta di seguito.
-
Utilizzare la schermata seguente per configurare VPN 3000 Concentrator per l'autenticazione a SDI:
-
Da SDI, selezionare Report > Log Monitor > Activity Monitor e fare clic su OK per osservare le richieste in arrivo.
-
Su VPN 3000 Concentrator, fare clic su Test per verificare la connessione.
-
Se l'autenticazione è valida, VPN 3000 Concentrator visualizza:
Autenticazione riuscita
Nell'esempio precedente è stato definito un server SDI globale. È inoltre possibile scegliere di definire i singoli server SDI per ciascun gruppo andando a Configurazione > Gestione utente > Gruppi, evidenziando il rispettivo gruppo e scegliendo Modifica server di autenticazione.
Per informazioni sul debug, fare riferimento alle seguenti sezioni di questo documento:
Verifica
Le informazioni contenute in questa sezione permettono di verificare che la configurazione funzioni correttamente.
Test di Cisco VPN Client su VPN 3000 Concentrator con SDI
Se tutto funziona fino a questo punto, è il momento di combinare Cisco VPN Client, VPN 3000 Concentrator e server SDI. È necessario apportare una modifica al VPN 3000 Concentrator modificando il gruppo di lavoro denominato "vpn3000" per inviare le richieste al server SDI.
Risoluzione dei problemi
Le informazioni contenute in questa sezione permettono di risolvere i problemi relativi alla configurazione.
Attivazione del debug sul concentratore VPN 3000
Nome classe per autenticazione:
-
AUTH
-
AUTHDBG
-
CODICEAUTENTE
Nome classe per IPSec:
-
IKE, IKEDBG, IKEDECODE
-
IPSEC, IPSECDBG, IPSECDECODE
-
Gravità da registrare = 1-9
-
Gravità alla console = 1-3
Fare clic su Get Log per visualizzare i risultati dell'operazione di debug.
Debug IPSec corretto con autenticazione locale
1 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=1 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): 00 00 00 00 00 00 00 00
Next Payload : SA (1)
Exchange Type : Oakley Aggressive Mode
Flags : 0
Message ID : 0
Length : 307
7 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=1 161.44.17.135
RECEIVED Message (msgid=0) with payloads :
HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) + NONE (0)
... total length : 307
10 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=2 161.44.17.135
processing SA payload
11 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=2 161.44.17.135
SA Payload Decode :
DOI : IPSEC (1)
Situation : Identity Only (1)
Length : 120
14 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=3 161.44.17.135
Proposal Decode:
Proposal # : 1
Protocol ID : ISAKMP (1)
#of Transforms: 4
Spi : 00 00 00 00
Length : 108
18 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=4 161.44.17.135
Transform # 1 Decode for Proposal # 1:
Transform # : 1
Transform ID : IKE (1)
Length : 24
20 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=5 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 1:
Encryption Alg: DES-CBC (1)
Hash Alg : MD5 (1)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
24 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=6 161.44.17.135
Transform # 2 Decode for Proposal # 1:
Transform # : 2
Transform ID : IKE (1)
Length : 24
26 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=7 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 2:
Encryption Alg: Triple-DES (5)
Hash Alg : MD5 (1)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
30 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=8 161.44.17.135
Transform # 3 Decode for Proposal # 1:
Transform # : 3
Transform ID : IKE (1)
Length : 24
32 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=9 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 3:
Encryption Alg: Triple-DES (5)
Hash Alg : SHA (2)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
36 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=10 161.44.17.135
Transform # 4 Decode for Proposal # 1:
Transform # : 4
Transform ID : IKE (1)
Length : 24
38 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=11 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 4:
Encryption Alg: DES-CBC (1)
Hash Alg : SHA (2)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
42 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=3 161.44.17.135
Proposal # 1, Transform # 1, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
47 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=4 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Encryption Alg:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
50 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=5 161.44.17.135
Proposal # 1, Transform # 2, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
55 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=6 161.44.17.135
Proposal # 1, Transform # 3, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
60 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=7 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Hash Alg:
Rcv'd: SHA
Cfg'd: MD5
62 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=8 161.44.17.135
Phase 1 failure against global IKE proposal # 3:
Mismatched attr types for class Encryption Alg:
Rcv'd: Triple-DES
Cfg'd: DES-CBC
65 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=9 161.44.17.135
Proposal # 1, Transform # 4, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
70 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=10 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Encryption Alg:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
73 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=11 161.44.17.135
Phase 1 failure against global IKE proposal # 3:
Mismatched attr types for class Hash Alg:
Rcv'd: SHA
Cfg'd: MD5
75 10/10/2000 17:12:32.560 SEV=7 IKEDBG/0 RPT=12 161.44.17.135
Oakley proposal is acceptable
76 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=13 161.44.17.135
processing ke payload
77 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=14 161.44.17.135
processing ISA_KE
78 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=1 161.44.17.135
processing nonce payload
79 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=2 161.44.17.135
Processing ID
80 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=3 161.44.17.135
processing vid payload
81 10/10/2000 17:12:32.580 SEV=9 IKEDBG/23 RPT=1 161.44.17.135
Starting group lookup for peer 161.44.17.135
82 10/10/2000 17:12:32.680 SEV=7 IKEDBG/0 RPT=15 161.44.17.135
Found Phase 1 Group (vpn3000)
83 10/10/2000 17:12:32.680 SEV=7 IKEDBG/14 RPT=1 161.44.17.135
Authentication configured for Internal
84 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=16 161.44.17.135
constructing ISA_SA for isakmp
85 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=17 161.44.17.135
constructing ke payload
86 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=4 161.44.17.135
constructing nonce payload
87 10/10/2000 17:12:32.680 SEV=9 IKE/0 RPT=1 161.44.17.135
Generating keys for Responder...
88 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=5 161.44.17.135
constructing ID
89 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=18
construct hash payload
90 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=19 161.44.17.135
computing hash
91 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=6 161.44.17.135
constructing vid payload
92 10/10/2000 17:12:32.680 SEV=8 IKEDBG/0 RPT=20 161.44.17.135
SENDING Message (msgid=0) with payloads :
HDR + SA (1) ... total length : 248
93 10/10/2000 17:12:32.730 SEV=8 IKEDECODE/0 RPT=12 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Aggressive Mode
Flags : 1 (ENCRYPT )
Message ID : 0
Length : 52
99 10/10/2000 17:12:32.730 SEV=8 IKEDBG/0 RPT=21 161.44.17.135
RECEIVED Message (msgid=0) with payloads :
HDR + HASH (8) + NONE (0) ... total length : 48
101 10/10/2000 17:12:32.730 SEV=9 IKEDBG/0 RPT=22 161.44.17.135
processing hash
102 10/10/2000 17:12:32.730 SEV=9 IKEDBG/0 RPT=23 161.44.17.135
computing hash
103 10/10/2000 17:12:33.410 SEV=8 IKEDECODE/0 RPT=13 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : 48687ca1
Length : 308
110 10/10/2000 17:12:33.410 SEV=9 IKEDBG/21 RPT=1 161.44.17.135
Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress
111 10/10/2000 17:12:33.410 SEV=9 IKEDBG/0 RPT=24 161.44.17.135
constructing blank hash
112 10/10/2000 17:12:33.410 SEV=9 IKEDBG/0 RPT=25 161.44.17.135
constructing qm hash
113 10/10/2000 17:12:33.410 SEV=8 IKEDBG/0 RPT=26 161.44.17.135
SENDING Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) ... total length : 68
115 10/10/2000 17:12:44.680 SEV=8 IKEDECODE/0 RPT=14 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Transactional
Flags : 1 (ENCRYPT )
Message ID : fc2ce5eb
Length : 92
122 10/10/2000 17:12:44.680 SEV=8 IKEDBG/0 RPT=27 161.44.17.135
RECEIVED Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 85
124 10/10/2000 17:12:44.680 SEV=9 IKEDBG/1 RPT=7
process_attr(): Enter!
125 10/10/2000 17:12:44.680 SEV=9 IKEDBG/1 RPT=8
Processing cfg reply attributes.
126 10/10/2000 17:12:44.980 SEV=7 IKEDBG/14 RPT=2 161.44.17.135
User [ 37297304 ]
Authentication configured for Internal
127 10/10/2000 17:12:44.980 SEV=4 IKE/52 RPT=7 161.44.17.135
User [ 37297304 ]
User (37297304) authenticated.
128 10/10/2000 17:12:44.980 SEV=9 IKEDBG/31 RPT=1 161.44.17.135
User [ 37297304 ]
Obtained IP addr (192.168.1.1) prior to initiating Mode Cfg (XAuth enabled)
130 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=28 161.44.17.135
User [ 37297304 ]
constructing blank hash
131 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=29 161.44.17.135
0000: 00010004 C0A80101 F0010000 ............
132 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=30 161.44.17.135
User [ 37297304 ]
constructing QM hash
133 10/10/2000 17:12:44.980 SEV=8 IKEDBG/0 RPT=31 161.44.17.135
SENDING Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) ... total length : 80
135 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=15 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Transactional
Flags : 1 (ENCRYPT )
Message ID : fc2ce5eb
Length : 68
142 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=32 161.44.17.135
RECEIVED Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 64
144 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=9
process_attr(): Enter!
145 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=10
Processing cfg ACK attributes
146 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=11
Received IPV4 address ack!
147 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=12
Received Save PW ack!
148 10/10/2000 17:12:44.990 SEV=4 AUTH/21 RPT=18
User 37297304 connected
149 10/10/2000 17:12:44.990 SEV=7 IKEDBG/22 RPT=1 161.44.17.135
User [ 37297304 ]
Resume Quick Mode processing, Cert/Trans Exch/RM DSID completed
151 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=33 161.44.17.135
RECEIVED Message (msgid=48687ca1) with payloads :
HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0)
... total length : 304
154 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=34 161.44.17.135
User [ 37297304 ]
processing hash
155 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=35 161.44.17.135
User [ 37297304 ]
processing SA payload
156 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=16 161.44.17.135
SA Payload Decode :
DOI : IPSEC (1)
Situation : Identity Only (1)
Length : 180
159 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=17 161.44.17.135
Proposal Decode:
Proposal # : 1
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
163 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=18 161.44.17.135
Transform # 1 Decode for Proposal # 1:
Transform # : 1
Transform ID : DES-CBC (2)
Length : 16
165 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=19 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
167 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=20 161.44.17.135
Proposal Decode:
Proposal # : 2
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
171 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=21 161.44.17.135
Transform # 1 Decode for Proposal # 2:
Transform # : 1
Transform ID : Triple-DES (3)
Length : 16
173 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=22 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
175 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=23 161.44.17.135
Proposal Decode:
Proposal # : 3
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
179 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=24 161.44.17.135
Transform # 1 Decode for Proposal # 3:
Transform # : 1
Transform ID : DES-CBC (2)
Length : 16
181 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=25 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
183 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=26 161.44.17.135
Proposal Decode:
Proposal # : 4
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
187 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=27 161.44.17.135
Transform # 1 Decode for Proposal # 4:
Transform # : 1
Transform ID : Triple-DES (3)
Length : 16
189 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=28 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
191 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=29 161.44.17.135
Proposal Decode:
Proposal # : 5
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
195 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=30 161.44.17.135
Transform # 1 Decode for Proposal # 5:
Transform # : 1
Transform ID : NULL (11)
Length : 16
197 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=31 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
199 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=32 161.44.17.135
Proposal Decode:
Proposal # : 6
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
203 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=33 161.44.17.135
Transform # 1 Decode for Proposal # 6:
Transform # : 1
Transform ID : NULL (11)
Length : 16
205 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=34 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
207 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=13 161.44.17.135
User [ 37297304 ]
processing nonce payload
208 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=14 161.44.17.135
User [ 37297304 ]
Processing ID
209 10/10/2000 17:12:44.990 SEV=5 IKE/25 RPT=13 161.44.17.135
User [ 37297304 ]
Received remote Proxy Host data in ID Payload:
Address 161.44.17.135, Protocol 0, Port 0
212 10/10/2000 17:12:44.990 SEV=7 IKEDBG/1 RPT=15 161.44.17.135
User [ 37297304 ]
Modifying client proxy src address!
213 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=16 161.44.17.135
User [ 37297304 ]
Processing ID
214 10/10/2000 17:12:44.990 SEV=5 IKE/24 RPT=7 161.44.17.135
User [ 37297304 ]
Received local Proxy Host data in ID Payload:
Address 172.18.124.134, Protocol 0, Port 0
217 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=36 161.44.17.135
User [ 37297304 ]
Processing Notify payload
218 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=35 161.44.17.135
Notify Payload Decode :
DOI : IPSEC (1)
Protocol : ISAKMP (1)
Message : Initial contact (24578)
Spi : 9D F3 34 FE 89 BF AA B2 B7 AD 34 D2 74 4D 05 DA
Length : 28
224 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=37
QM IsRekeyed old sa not found by addr
225 10/10/2000 17:12:44.990 SEV=5 IKE/66 RPT=13 161.44.17.135
User [ 37297304 ]
IKE Remote Peer configured for SA: ESP-3DES-MD5
226 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=38 161.44.17.135
User [ 37297304 ]
processing IPSEC SA
227 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=39
Proposal # 1, Transform # 1, Type ESP, Id DES-CBC
Parsing received transform:
Phase 2 failure:
Mismatched transform IDs for protocol ESP:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
232 10/10/2000 17:12:45.000 SEV=7 IKEDBG/27 RPT=1 161.44.17.135
User [ 37297304 ]
IPSec SA Proposal # 2, Transform # 1 acceptable
233 10/10/2000 17:12:45.000 SEV=7 IKEDBG/0 RPT=40 161.44.17.135
User [ 37297304 ]
IKE: requesting SPI!
234 10/10/2000 17:12:45.000 SEV=6 IKE/0 RPT=2
AM received unexpected event EV_ACTIVATE_NEW_SA in state AM_ACTIVE
235 10/10/2000 17:12:45.000 SEV=9 IPSECDBG/6 RPT=1
IPSEC key message parse - msgtype 6, len 164, vers 1, pid 00000000, seq 13,
err 0, type 2, mode 0, state 32, label 0, pad 0, spi 00000000, encrKeyLen 0,
hashKeyLen 0, ivlen 0, alg 0, hmacAlg 0, lifetype 0, lifetime1 300,
lifetime2 2000000000, dsId 2
239 10/10/2000 17:12:45.000 SEV=9 IPSECDBG/1 RPT=1
Processing KEY_GETSPI msg!
240 10/10/2000 17:12:45.000 SEV=7 IPSECDBG/13 RPT=1
Reserved SPI 1773955517
241 10/10/2000 17:12:45.000 SEV=8 IKEDBG/6 RPT=1
IKE got SPI from key engine: SPI = 0x69bc69bd
242 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=41 161.44.17.135
User [ 37297304 ]
oakley constructing quick mode
243 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=42 161.44.17.135
User [ 37297304 ]
constructing blank hash
244 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=43 161.44.17.135
User [ 37297304 ]
constructing ISA_SA for ipsec
245 10/10/2000 17:12:45.000 SEV=9 IKEDBG/1 RPT=17 161.44.17.135
User [ 37297304 ]
constructing ipsec nonce payload
246 10/10/2000 17:12:45.000 SEV=9 IKEDBG/1 RPT=18 161.44.17.135
User [ 37297304 ]
constructing proxy ID
247 10/10/2000 17:12:45.000 SEV=7 IKEDBG/0 RPT=44 161.44.17.135
User [ 37297304 ]
Transmitting Proxy Id:
Remote host: 192.168.1.1 Protocol 0 Port 0
Local host: 172.18.124.134 Protocol 0 Port 0
251 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=45 161.44.17.135
User [ 37297304 ]
constructing QM hash
252 10/10/2000 17:12:45.000 SEV=8 IKEDBG/0 RPT=46 161.44.17.135
SENDING Message (msgid=48687ca1) with payloads :
HDR + HASH (8) ... total length : 136
254 10/10/2000 17:12:45.010 SEV=8 IKEDECODE/0 RPT=36 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : 48687ca1
Length : 52
261 10/10/2000 17:12:45.010 SEV=8 IKEDBG/0 RPT=47 161.44.17.135
RECEIVED Message (msgid=48687ca1) with payloads :
HDR + HASH (8) + NONE (0) ... total length : 48
263 10/10/2000 17:12:45.010 SEV=9 IKEDBG/0 RPT=48 161.44.17.135
User [ 37297304 ]
processing hash
264 10/10/2000 17:12:45.010 SEV=9 IKEDBG/0 RPT=49 161.44.17.135
User [ 37297304 ]
loading all IPSEC SAs
265 10/10/2000 17:12:45.010 SEV=9 IKEDBG/1 RPT=19 161.44.17.135
User [ 37297304 ]
Generating Quick Mode Key!
266 10/10/2000 17:12:45.010 SEV=9 IKEDBG/1 RPT=20 161.44.17.135
User [ 37297304 ]
Generating Quick Mode Key!
267 10/10/2000 17:12:45.020 SEV=7 IKEDBG/0 RPT=50 161.44.17.135
User [ 37297304 ]
Loading host:
Dst: 172.18.124.134
Src: 192.168.1.1
268 10/10/2000 17:12:45.020 SEV=4 IKE/49 RPT=13 161.44.17.135
User [ 37297304 ]
Security negotiation complete for User (37297304)
Responder, Inbound SPI = 0x69bc69bd, Outbound SPI = 0x991518b4
271 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/6 RPT=2
IPSEC key message parse - msgtype 1, Len 536, vers 1, pid 00000000, seq 0,
err 0, type 2, mode 1, state 64, label 0, pad 0, spi 991518b4, encrKeyLen 24,
hashKeyLen 16, ivlen 8, alg 2, hmacAlg 3, lifetype 0, lifetime1 0,
lifetime2 0, dsId 2
274 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=2
Processing KEY_ADD MSG!
275 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=3
key_msghdr2secassoc(): Enter
276 10/10/2000 17:12:45.020 SEV=7 IPSECDBG/1 RPT=4
No USER filter configured
277 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=5
KeyProcessAdd: Enter
278 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=6
KeyProcessAdd: Adding outbound SA
279 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=7
KeyProcessAdd: src 172.18.124.134 mask 0.0.0.0, dst 192.168.1.1 mask 0.0.0.0
280 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=8
KeyProcessAdd: FilterIpsecAddIkeSa success
281 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/6 RPT=3
IPSEC key message parse - msgtype 3, Len 292, vers 1, pid 00000000, seq 0,
err 0, type 2, mode 1, state 32, label 0, pad 0, spi 69bc69bd, encrKeyLen 24,
hashKeyLen 16, ivlen 8, alg 2, hmacAlg 3, lifetype 0, lifetime1 0,
lifetime2 0, dsId 2
284 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=9
Processing KEY_UPDATE MSG!
285 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=10
Update inbound SA addresses
286 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=11
key_msghdr2secassoc(): Enter
287 10/10/2000 17:12:45.020 SEV=7 IPSECDBG/1 RPT=12
No USER filter configured
288 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=13
KeyProcessUpdate: Enter
289 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=14
KeyProcessUpdate: success
290 10/10/2000 17:12:45.020 SEV=8 IKEDBG/7 RPT=1
IKE got a KEY_ADD MSG for SA: SPI = 0x991518b4
291 10/10/2000 17:12:45.020 SEV=8 IKEDBG/0 RPT=51
pitcher: rcv KEY_UPDATE, spi 0x69bc69bd
Debug IPSec corretto con autenticazione locale
1 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=1 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): 00 00 00 00 00 00 00 00
Next Payload : SA (1)
Exchange Type : Oakley Aggressive Mode
Flags : 0
Message ID : 0
Length : 307
7 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=1 161.44.17.135
RECEIVED Message (msgid=0) with payloads :
HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) + NONE (0)
... total length : 307
10 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=2 161.44.17.135
processing SA payload
11 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=2 161.44.17.135
SA Payload Decode :
DOI : IPSEC (1)
Situation : Identity Only (1)
Length : 120
14 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=3 161.44.17.135
Proposal Decode:
Proposal # : 1
Protocol ID : ISAKMP (1)
#of Transforms: 4
Spi : 00 00 00 00
Length : 108
18 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=4 161.44.17.135
Transform # 1 Decode for Proposal # 1:
Transform # : 1
Transform ID : IKE (1)
Length : 24
20 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=5 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 1:
Encryption Alg: DES-CBC (1)
Hash Alg : MD5 (1)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
24 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=6 161.44.17.135
Transform # 2 Decode for Proposal # 1:
Transform # : 2
Transform ID : IKE (1)
Length : 24
26 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=7 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 2:
Encryption Alg: Triple-DES (5)
Hash Alg : MD5 (1)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
30 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=8 161.44.17.135
Transform # 3 Decode for Proposal # 1:
Transform # : 3
Transform ID : IKE (1)
Length : 24
32 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=9 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 3:
Encryption Alg: Triple-DES (5)
Hash Alg : SHA (2)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
36 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=10 161.44.17.135
Transform # 4 Decode for Proposal # 1:
Transform # : 4
Transform ID : IKE (1)
Length : 24
38 10/10/2000 17:12:32.560 SEV=8 IKEDECODE/0 RPT=11 161.44.17.135
Phase 1 SA Attribute Decode for Transform # 4:
Encryption Alg: DES-CBC (1)
Hash Alg : SHA (2)
DH Group : Oakley Group 1 (1)
Auth Method : Preshared Key (1)
42 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=3 161.44.17.135
Proposal # 1, Transform # 1, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
47 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=4 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Encryption Alg:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
50 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=5 161.44.17.135
Proposal # 1, Transform # 2, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
55 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=6 161.44.17.135
Proposal # 1, Transform # 3, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
60 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=7 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Hash Alg:
Rcv'd: SHA
Cfg'd: MD5
62 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=8 161.44.17.135
Phase 1 failure against global IKE proposal # 3:
Mismatched attr types for class Encryption Alg:
Rcv'd: Triple-DES
Cfg'd: DES-CBC
65 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=9 161.44.17.135
Proposal # 1, Transform # 4, Type ISAKMP, Id IKE
Parsing received transform:
Phase 1 failure against global IKE proposal # 1:
Mismatched attr types for class DH Group:
Rcv'd: Oakley Group 1
Cfg'd: Oakley Group 2
70 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=10 161.44.17.135
Phase 1 failure against global IKE proposal # 2:
Mismatched attr types for class Encryption Alg:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
73 10/10/2000 17:12:32.560 SEV=8 IKEDBG/0 RPT=11 161.44.17.135
Phase 1 failure against global IKE proposal # 3:
Mismatched attr types for class Hash Alg:
Rcv'd: SHA
Cfg'd: MD5
75 10/10/2000 17:12:32.560 SEV=7 IKEDBG/0 RPT=12 161.44.17.135
Oakley proposal is acceptable
76 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=13 161.44.17.135
processing ke payload
77 10/10/2000 17:12:32.560 SEV=9 IKEDBG/0 RPT=14 161.44.17.135
processing ISA_KE
78 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=1 161.44.17.135
processing nonce payload
79 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=2 161.44.17.135
Processing ID
80 10/10/2000 17:12:32.560 SEV=9 IKEDBG/1 RPT=3 161.44.17.135
processing vid payload
81 10/10/2000 17:12:32.580 SEV=9 IKEDBG/23 RPT=1 161.44.17.135
Starting group lookup for peer 161.44.17.135
82 10/10/2000 17:12:32.680 SEV=7 IKEDBG/0 RPT=15 161.44.17.135
Found Phase 1 Group (vpn3000)
83 10/10/2000 17:12:32.680 SEV=7 IKEDBG/14 RPT=1 161.44.17.135
Authentication configured for Internal
84 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=16 161.44.17.135
constructing ISA_SA for isakmp
85 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=17 161.44.17.135
constructing ke payload
86 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=4 161.44.17.135
constructing nonce payload
87 10/10/2000 17:12:32.680 SEV=9 IKE/0 RPT=1 161.44.17.135
Generating keys for Responder...
88 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=5 161.44.17.135
constructing ID
89 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=18
construct hash payload
90 10/10/2000 17:12:32.680 SEV=9 IKEDBG/0 RPT=19 161.44.17.135
computing hash
91 10/10/2000 17:12:32.680 SEV=9 IKEDBG/1 RPT=6 161.44.17.135
constructing vid payload
92 10/10/2000 17:12:32.680 SEV=8 IKEDBG/0 RPT=20 161.44.17.135
SENDING Message (msgid=0) with payloads :
HDR + SA (1) ... total length : 248
93 10/10/2000 17:12:32.730 SEV=8 IKEDECODE/0 RPT=12 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Aggressive Mode
Flags : 1 (ENCRYPT )
Message ID : 0
Length : 52
99 10/10/2000 17:12:32.730 SEV=8 IKEDBG/0 RPT=21 161.44.17.135
RECEIVED Message (msgid=0) with payloads :
HDR + HASH (8) + NONE (0) ... total length : 48
101 10/10/2000 17:12:32.730 SEV=9 IKEDBG/0 RPT=22 161.44.17.135
processing hash
102 10/10/2000 17:12:32.730 SEV=9 IKEDBG/0 RPT=23 161.44.17.135
computing hash
103 10/10/2000 17:12:33.410 SEV=8 IKEDECODE/0 RPT=13 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : 48687ca1
Length : 308
110 10/10/2000 17:12:33.410 SEV=9 IKEDBG/21 RPT=1 161.44.17.135
Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress
111 10/10/2000 17:12:33.410 SEV=9 IKEDBG/0 RPT=24 161.44.17.135
constructing blank hash
112 10/10/2000 17:12:33.410 SEV=9 IKEDBG/0 RPT=25 161.44.17.135
constructing qm hash
113 10/10/2000 17:12:33.410 SEV=8 IKEDBG/0 RPT=26 161.44.17.135
SENDING Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) ... total length : 68
115 10/10/2000 17:12:44.680 SEV=8 IKEDECODE/0 RPT=14 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Transactional
Flags : 1 (ENCRYPT )
Message ID : fc2ce5eb
Length : 92
122 10/10/2000 17:12:44.680 SEV=8 IKEDBG/0 RPT=27 161.44.17.135
RECEIVED Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 85
124 10/10/2000 17:12:44.680 SEV=9 IKEDBG/1 RPT=7
process_attr(): Enter!
125 10/10/2000 17:12:44.680 SEV=9 IKEDBG/1 RPT=8
Processing cfg reply attributes.
126 10/10/2000 17:12:44.980 SEV=7 IKEDBG/14 RPT=2 161.44.17.135
User [ 37297304 ]
Authentication configured for Internal
127 10/10/2000 17:12:44.980 SEV=4 IKE/52 RPT=7 161.44.17.135
User [ 37297304 ]
User (37297304) authenticated.
128 10/10/2000 17:12:44.980 SEV=9 IKEDBG/31 RPT=1 161.44.17.135
User [ 37297304 ]
Obtained IP addr (192.168.1.1) prior to initiating Mode Cfg (XAuth enabled)
130 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=28 161.44.17.135
User [ 37297304 ]
constructing blank hash
131 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=29 161.44.17.135
0000: 00010004 C0A80101 F0010000 ............
132 10/10/2000 17:12:44.980 SEV=9 IKEDBG/0 RPT=30 161.44.17.135
User [ 37297304 ]
constructing QM hash
133 10/10/2000 17:12:44.980 SEV=8 IKEDBG/0 RPT=31 161.44.17.135
SENDING Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) ... total length : 80
135 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=15 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Transactional
Flags : 1 (ENCRYPT )
Message ID : fc2ce5eb
Length : 68
142 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=32 161.44.17.135
RECEIVED Message (msgid=fc2ce5eb) with payloads :
HDR + HASH (8) + ATTR (14) + NONE (0) ... total length : 64
144 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=9
process_attr(): Enter!
145 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=10
Processing cfg ACK attributes
146 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=11
Received IPV4 address ack!
147 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=12
Received Save PW ack!
148 10/10/2000 17:12:44.990 SEV=4 AUTH/21 RPT=18
User 37297304 connected
149 10/10/2000 17:12:44.990 SEV=7 IKEDBG/22 RPT=1 161.44.17.135
User [ 37297304 ]
Resume Quick Mode processing, Cert/Trans Exch/RM DSID completed
151 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=33 161.44.17.135
RECEIVED Message (msgid=48687ca1) with payloads :
HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NOTIFY (11) + NONE (0)
... total length : 304
154 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=34 161.44.17.135
User [ 37297304 ]
processing hash
155 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=35 161.44.17.135
User [ 37297304 ]
processing SA payload
156 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=16 161.44.17.135
SA Payload Decode :
DOI : IPSEC (1)
Situation : Identity Only (1)
Length : 180
159 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=17 161.44.17.135
Proposal Decode:
Proposal # : 1
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
163 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=18 161.44.17.135
Transform # 1 Decode for Proposal # 1:
Transform # : 1
Transform ID : DES-CBC (2)
Length : 16
165 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=19 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
167 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=20 161.44.17.135
Proposal Decode:
Proposal # : 2
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
171 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=21 161.44.17.135
Transform # 1 Decode for Proposal # 2:
Transform # : 1
Transform ID : Triple-DES (3)
Length : 16
173 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=22 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
175 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=23 161.44.17.135
Proposal Decode:
Proposal # : 3
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
179 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=24 161.44.17.135
Transform # 1 Decode for Proposal # 3:
Transform # : 1
Transform ID : DES-CBC (2)
Length : 16
181 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=25 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
183 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=26 161.44.17.135
Proposal Decode:
Proposal # : 4
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
187 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=27 161.44.17.135
Transform # 1 Decode for Proposal # 4:
Transform # : 1
Transform ID : Triple-DES (3)
Length : 16
189 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=28 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
191 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=29 161.44.17.135
Proposal Decode:
Proposal # : 5
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
195 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=30 161.44.17.135
Transform # 1 Decode for Proposal # 5:
Transform # : 1
Transform ID : NULL (11)
Length : 16
197 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=31 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: MD5 (1)
Encapsulation : Tunnel (1)
199 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=32 161.44.17.135
Proposal Decode:
Proposal # : 6
Protocol ID : ESP (3)
#of Transforms: 1
Spi : 99 15 18 B4
Length : 28
203 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=33 161.44.17.135
Transform # 1 Decode for Proposal # 6:
Transform # : 1
Transform ID : NULL (11)
Length : 16
205 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=34 161.44.17.135
Phase 2 SA Attribute Decode for Transform # 1:
HMAC Algorithm: SHA (2)
Encapsulation : Tunnel (1)
207 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=13 161.44.17.135
User [ 37297304 ]
processing nonce payload
208 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=14 161.44.17.135
User [ 37297304 ]
Processing ID
209 10/10/2000 17:12:44.990 SEV=5 IKE/25 RPT=13 161.44.17.135
User [ 37297304 ]
Received remote Proxy Host data in ID Payload:
Address 161.44.17.135, Protocol 0, Port 0
212 10/10/2000 17:12:44.990 SEV=7 IKEDBG/1 RPT=15 161.44.17.135
User [ 37297304 ]
Modifying client proxy src address!
213 10/10/2000 17:12:44.990 SEV=9 IKEDBG/1 RPT=16 161.44.17.135
User [ 37297304 ]
Processing ID
214 10/10/2000 17:12:44.990 SEV=5 IKE/24 RPT=7 161.44.17.135
User [ 37297304 ]
Received local Proxy Host data in ID Payload:
Address 172.18.124.134, Protocol 0, Port 0
217 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=36 161.44.17.135
User [ 37297304 ]
Processing Notify payload
218 10/10/2000 17:12:44.990 SEV=8 IKEDECODE/0 RPT=35 161.44.17.135
Notify Payload Decode :
DOI : IPSEC (1)
Protocol : ISAKMP (1)
Message : Initial contact (24578)
Spi : 9D F3 34 FE 89 BF AA B2 B7 AD 34 D2 74 4D 05 DA
Length : 28
224 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=37
QM IsRekeyed old sa not found by addr
225 10/10/2000 17:12:44.990 SEV=5 IKE/66 RPT=13 161.44.17.135
User [ 37297304 ]
IKE Remote Peer configured for SA: ESP-3DES-MD5
226 10/10/2000 17:12:44.990 SEV=9 IKEDBG/0 RPT=38 161.44.17.135
User [ 37297304 ]
processing IPSEC SA
227 10/10/2000 17:12:44.990 SEV=8 IKEDBG/0 RPT=39
Proposal # 1, Transform # 1, Type ESP, Id DES-CBC
Parsing received transform:
Phase 2 failure:
Mismatched transform IDs for protocol ESP:
Rcv'd: DES-CBC
Cfg'd: Triple-DES
232 10/10/2000 17:12:45.000 SEV=7 IKEDBG/27 RPT=1 161.44.17.135
User [ 37297304 ]
IPSec SA Proposal # 2, Transform # 1 acceptable
233 10/10/2000 17:12:45.000 SEV=7 IKEDBG/0 RPT=40 161.44.17.135
User [ 37297304 ]
IKE: requesting SPI!
234 10/10/2000 17:12:45.000 SEV=6 IKE/0 RPT=2
AM received unexpected event EV_ACTIVATE_NEW_SA in state AM_ACTIVE
235 10/10/2000 17:12:45.000 SEV=9 IPSECDBG/6 RPT=1
IPSEC key message parse - msgtype 6, len 164, vers 1, pid 00000000, seq 13,
err 0, type 2, mode 0, state 32, label 0, pad 0, spi 00000000, encrKeyLen 0,
hashKeyLen 0, ivlen 0, alg 0, hmacAlg 0, lifetype 0, lifetime1 300,
lifetime2 2000000000, dsId 2
239 10/10/2000 17:12:45.000 SEV=9 IPSECDBG/1 RPT=1
Processing KEY_GETSPI msg!
240 10/10/2000 17:12:45.000 SEV=7 IPSECDBG/13 RPT=1
Reserved SPI 1773955517
241 10/10/2000 17:12:45.000 SEV=8 IKEDBG/6 RPT=1
IKE got SPI from key engine: SPI = 0x69bc69bd
242 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=41 161.44.17.135
User [ 37297304 ]
oakley constructing quick mode
243 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=42 161.44.17.135
User [ 37297304 ]
constructing blank hash
244 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=43 161.44.17.135
User [ 37297304 ]
constructing ISA_SA for ipsec
245 10/10/2000 17:12:45.000 SEV=9 IKEDBG/1 RPT=17 161.44.17.135
User [ 37297304 ]
constructing ipsec nonce payload
246 10/10/2000 17:12:45.000 SEV=9 IKEDBG/1 RPT=18 161.44.17.135
User [ 37297304 ]
constructing proxy ID
247 10/10/2000 17:12:45.000 SEV=7 IKEDBG/0 RPT=44 161.44.17.135
User [ 37297304 ]
Transmitting Proxy Id:
Remote host: 192.168.1.1 Protocol 0 Port 0
Local host: 172.18.124.134 Protocol 0 Port 0
251 10/10/2000 17:12:45.000 SEV=9 IKEDBG/0 RPT=45 161.44.17.135
User [ 37297304 ]
constructing QM hash
252 10/10/2000 17:12:45.000 SEV=8 IKEDBG/0 RPT=46 161.44.17.135
SENDING Message (msgid=48687ca1) with payloads :
HDR + HASH (8) ... total length : 136
254 10/10/2000 17:12:45.010 SEV=8 IKEDECODE/0 RPT=36 161.44.17.135
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 9D F3 34 FE 89 BF AA B2
Responder Cookie(8): B7 AD 34 D2 74 4D 05 DA
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : 48687ca1
Length : 52
261 10/10/2000 17:12:45.010 SEV=8 IKEDBG/0 RPT=47 161.44.17.135
RECEIVED Message (msgid=48687ca1) with payloads :
HDR + HASH (8) + NONE (0) ... total length : 48
263 10/10/2000 17:12:45.010 SEV=9 IKEDBG/0 RPT=48 161.44.17.135
User [ 37297304 ]
processing hash
264 10/10/2000 17:12:45.010 SEV=9 IKEDBG/0 RPT=49 161.44.17.135
User [ 37297304 ]
loading all IPSEC SAs
265 10/10/2000 17:12:45.010 SEV=9 IKEDBG/1 RPT=19 161.44.17.135
User [ 37297304 ]
Generating Quick Mode Key!
266 10/10/2000 17:12:45.010 SEV=9 IKEDBG/1 RPT=20 161.44.17.135
User [ 37297304 ]
Generating Quick Mode Key!
267 10/10/2000 17:12:45.020 SEV=7 IKEDBG/0 RPT=50 161.44.17.135
User [ 37297304 ]
Loading host:
Dst: 172.18.124.134
Src: 192.168.1.1
268 10/10/2000 17:12:45.020 SEV=4 IKE/49 RPT=13 161.44.17.135
User [ 37297304 ]
Security negotiation complete for User (37297304)
Responder, Inbound SPI = 0x69bc69bd, Outbound SPI = 0x991518b4
271 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/6 RPT=2
IPSEC key message parse - msgtype 1, Len 536, vers 1, pid 00000000, seq 0,
err 0, type 2, mode 1, state 64, label 0, pad 0, spi 991518b4, encrKeyLen 24,
hashKeyLen 16, ivlen 8, alg 2, hmacAlg 3, lifetype 0, lifetime1 0,
lifetime2 0, dsId 2
274 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=2
Processing KEY_ADD MSG!
275 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=3
key_msghdr2secassoc(): Enter
276 10/10/2000 17:12:45.020 SEV=7 IPSECDBG/1 RPT=4
No USER filter configured
277 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=5
KeyProcessAdd: Enter
278 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=6
KeyProcessAdd: Adding outbound SA
279 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=7
KeyProcessAdd: src 172.18.124.134 mask 0.0.0.0, dst 192.168.1.1 mask 0.0.0.0
280 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=8
KeyProcessAdd: FilterIpsecAddIkeSa success
281 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/6 RPT=3
IPSEC key message parse - msgtype 3, Len 292, vers 1, pid 00000000, seq 0,
err 0, type 2, mode 1, state 32, label 0, pad 0, spi 69bc69bd, encrKeyLen 24,
hashKeyLen 16, ivlen 8, alg 2, hmacAlg 3, lifetype 0, lifetime1 0,
lifetime2 0, dsId 2
284 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=9
Processing KEY_UPDATE MSG!
285 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=10
Update inbound SA addresses
286 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=11
key_msghdr2secassoc(): Enter
287 10/10/2000 17:12:45.020 SEV=7 IPSECDBG/1 RPT=12
No USER filter configured
288 10/10/2000 17:12:45.020 SEV=9 IPSECDBG/1 RPT=13
KeyProcessUpdate: Enter
289 10/10/2000 17:12:45.020 SEV=8 IPSECDBG/1 RPT=14
KeyProcessUpdate: success
290 10/10/2000 17:12:45.020 SEV=8 IKEDBG/7 RPT=1
IKE got a KEY_ADD MSG for SA: SPI = 0x991518b4
291 10/10/2000 17:12:45.020 SEV=8 IKEDBG/0 RPT=51
pitcher: rcv KEY_UPDATE, spi 0x69bc69bd
Buon debug con SDI
Debug SDI
In caso di esito positivo (prima autenticazione su SDI)
10/06/2000 11:57:04/U 37297304/vpn3000 000037297304/37297304 372 10/06/2000 11:57:04/L Node Secret Sent to Client zekie.cisco.com 10/06/2000 15:57:05/U 37297304/vpn3000 000037297304/37297304 372 10/06/2000 11:57:05/U PASSCODE Accepted zekie.cisco.com
In caso di esito positivo (dopo la prima autenticazione su SDI)
10/06/2000 16:06:09U 37297304/vpn3000 000037297304/37297304 372 10/06/2000 12:06:09L PASSCODE Accepted zekie.cisco.com
Debug VPN 3000 Concentrator (in prova)
Debug del "nome della classe" per l'autenticazione:
-
AUTH
-
AUTHDBG
-
CODICEAUTENTE
4 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/1 RPT=1 AUTH_Open() returns 14 5 10/06/2000 14:09:25.000 SEV=7 AUTH/12 RPT=1 Authentication session opened: handle = 14 6 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/3 RPT=1 AUTH_PutAttrTable(14, 5a2aa0) 7 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/5 RPT=1 AUTH_Authenticate(14, e5187e0, 306bdc) 8 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/59 RPT=1 AUTH_BindServer(71e097c, 0, 0) 9 10/06/2000 14:09:25.000 SEV=9 AUTHDBG/69 RPT=1 Auth Server 649ab4 has been bound to ACB 71e097c, sessions = 1 10 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/65 RPT=1 AUTH_CreateTimer(71e097c, 0, 0) 11 10/06/2000 14:09:25.000 SEV=9 AUTHDBG/72 RPT=1 Reply timer created: handle = 490011 12 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/61 RPT=1 AUTH_BuildMsg(71e097c, 0, 0) 13 10/06/2000 14:09:25.000 SEV=8 AUTHDBG/51 RPT=1 Sdi_Build(71e097c) 14 10/06/2000 14:09:25.010 SEV=8 AUTHDBG/64 RPT=1 AUTH_StartTimer(71e097c, 0, 0) 15 10/06/2000 14:09:25.010 SEV=9 AUTHDBG/73 RPT=1 Reply timer started: handle = 490011, timestamp = 8553930, timeout = 4000 16 10/06/2000 14:09:25.010 SEV=8 AUTHDBG/62 RPT=1 AUTH_SndRequest(71e097c, 0, 0) 17 10/06/2000 14:09:25.010 SEV=8 AUTHDBG/52 RPT=1 Sdi_Xmt(71e097c) 18 10/06/2000 14:09:25.010 SEV=9 AUTHDBG/71 RPT=1 xmit_cnt = 1 19 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/63 RPT=1 AUTH_RcvReply(71e097c, 0, 0) 20 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/53 RPT=1 Sdi_Rcv(71e097c) 21 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/66 RPT=1 AUTH_DeleteTimer(71e097c, 0, 0) 22 10/06/2000 14:09:26.080 SEV=9 AUTHDBG/74 RPT=1 Reply timer stopped: handle = 490011, timestamp = 8554037 23 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/58 RPT=1 AUTH_Callback(71e097c, 0, 0) 24 10/06/2000 14:09:26.080 SEV=6 AUTH/4 RPT=1 Authentication successful: handle = 14, server = 172.18.124.99, user = 37297304 25 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/2 RPT=1 AUTH_Close(14) 26 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/60 RPT=1 AUTH_UnbindServer(71e097c, 0, 0) 27 10/06/2000 14:09:26.080 SEV=9 AUTHDBG/70 RPT=1 Auth Server 649ab4 has been unbound from ACB 71e097c, sessions = 0 28 10/06/2000 14:09:26.080 SEV=8 AUTHDBG/10 RPT=1 AUTH_Int_FreeAuthCB(71e097c) 29 10/06/2000 14:09:26.080 SEV=9 AUTHDBG/19 RPT=1 instance = 15, clone_instance = 0 30 10/06/2000 14:09:26.080 SEV=7 AUTH/13 RPT=1 Authentication session closed: handle = 14
Debug non validi
Nome utente non valido o utente non attivato nel client
Debug SDI
10/06/2000 16:30:21U junk/vpn3000 10/06/2000 12:30:21L User Not on Client zekie.cisco.com
debug VPN 3000
21 10/06/2000 14:20:06.310 SEV=3 AUTH/5 RPT=5 Authentication rejected: Reason = Unspecified handle = 15, server = 172.18.124.99, user = junk
Nome utente valido, passcode non valido
Debug SDI
10/06/2000 16:33:07U 37297304/vpn3000 000037297304/37297304 372 10/06/2000 12:33:07L ACCESS DENIED, PASSCODE Incorrect zekie.cisco.com
debug VPN 3000
249 10/06/2000 14:22:52.160 SEV=3 AUTH/5 RPT=6 Authentication rejected: Reason = Unspecified handle = 16, server = 172.18.124.99, user = 37297304
Server SDI irraggiungibile o daemon non attivo
Debug SDI
Non visualizza nulla (non ha ricevuto richiesta)
debug VPN 3000
77 10/06/2000 14:28:55.600 SEV=4 AUTH/9 RPT=7 Authentication failed: Reason = Network error handle = 17, server = 172.18.124.99, user = 37297304
VPN 3000 non configurata come client sulla scatola SDI
Debug SDI
10/06/2000 17:37:42U --/172.18.124.134 -->/ 10/06/2000 13:36:42L Client Not Found zekie.cisco.com
debug VPN 3000
113 10/06/2000 15:26:27.440 SEV=3 AUTH/5 RPT=8 Authentication rejected: Reason = Unspecified handle = 21, server = 172.18.124.99, user = 37297304
VPN 3000 Concentrator rimosso come client dal server SDI, quindi riaggiunto
Il server SDI ha tentato di inviare il file SECURID per sostituire quello precedente, ma VPN 3000 aveva già questo file.
Messaggio su SDI
10/06/2000 13:42:18L Node Verification Failed zekie.cisco.com
debug VPN 3000
21 10/06/2000 15:32:03.030 SEV=3 AUTH/5 RPT=9 Authentication rejected: Reason = Unspecified handle = 22, server = 172.18.124.99, user = 37297304
Per risolvere il problema, eliminare il file SECURID sul concentratore VPN 3000 scegliendo Amministrazione > Gestione file > File > SECURID > Elimina. Al successivo test, VPN 3000 Concentrator accetta il nuovo file dal server SDI. Se la casella di controllo Modifica client > Segreto nodo inviato è disattivata sull'interfaccia SDI, il server SDI non è in grado di completare lo scambio. Quando VPN 3000 Concentrator ha il file SECURID, la casella di controllo Segreto nodo inviato è selezionata/non disattivata.
Informazioni correlate
Cronologia delle revisioni
| Revisione | Data di pubblicazione | Commenti |
|---|---|---|
1.0 |
14-Jan-2008 |
Versione iniziale |
Feedback