ワーカー ノードの追加
既存のクラスタにワーカーノードを追加するには、この手順を使用します。
(注) |
ワーカー ノードのみが GUI を使用して登録できます。 |
始める前に
3 つすべてのサービス ノードがブートストラップされていることを確認してください。
手順
ステップ 1 |
新しいワーカーノードの電源をオンにし、ブートストラップを完了します。このノードのシリアル番号を書き留めます。 ノードのブートストラップについては、Cisco Application Services Engine の展開 を参照してください。最大 4 つのワーカーノードをクラスタに含めることができます。
|
||
ステップ 2 |
Cisco Application Services Engine GUI にログインします。 |
||
ステップ 3 |
[システムリソース(System Resources)] > [ノード(Nodes)] を選択します。 GUIでは、ワーカー ノード エントリが [Register] として表示されます。シリアル ナンバーが新しいノードのものと一致することを確認します。 |