デバイス グループの管理
この章では、デバイス グループの管理について説明します。
デバイス グループについて
デバイス グループは自動的に作成されます。デバイス検出後、デバイス グループを、状態に関係なくデバイス タイプに基づいて検索できます。ネットワークに導入し、ライセンスを供与したデバイスのみがグループに表示されます。[デバイス グループ(Device Group)] ペインには、空のグループやデバイスがないグループは表示されません。
デバイスをグループ化すると、単一のデバイス、またはデバイスのグループのデータを表示できるようになります。カスタマイズされたグループを作成して、目的の情報を監視することができます。グループ構造は、[デバイス グループ(Device Group)] ペインで一覧またはツリー ビューとして表示できます。[デバイス グループ(Device Group)] ペインは、、会議 の診断(Session Conference Diagnostice)](フィルタとして)、[エンドポイントの診断(Endpoint Diagnostics)]、[アラームとイベント(Alarms and Events)] ページで使用できます。目的のグループからのデバイスまたはエンドポイントを選択、インベントリの詳細を確認、、。[ポーリング パラメータ(Polling Parameters)] ページの [デバイス グループ セレクタ(Device Group Selector)] からは、ポーリングするデバイスを選択することもできます。詳細については、「デバイス グループ セレクタ」を参照してください。
Cisco Prime Collaboration Assurance は、階層形式でグループをサポートしています。それぞれの子グループは親グループのサブグループであり、そのグループ メンバーシップは直接の親グループのサブセットになります。オブジェクトがグループに属するためには、オブジェクトがそのグループのルールと親グループのルールに従っている必要があります。
グループ セレクタ(ツリービュー)が使用可能なページには、手動でグループを作成することもできます。
グループ化は、次のものをフィルタリングするために使用します。
-
[インベントリ管理(Inventory Management)] ページのデバイス
-
レポート(Reports)
-
[会議の診断(Conference Diagnostics)] ページの会議
-
[エンドポイントの診断(Endpoint Diagnostics)] ページのエンドポイント
-
アラームおよびイベント ブラウザ ページのアラームとイベント
-
ランディング ページのダッシュレット
Cisco Prime Collaboration Assurance 内のデバイスは、次のとおりにグループ分けされます。
-
システム定義グループ:デバイス タイプに基づき、システムによって定義されています。システム定義グループは常にダイナミックであり、削除または編集できません。
定義済みグループ:エンドポイント グループに基づき、システムによって定義されています。定義済みグループは常にダイナミックであり、削除または編集できません。使用可能な定義済みグループは、次のとおりです。
-
音声 IP 電話
-
デスクトップ ビデオ
-
イマーシブ テレプレゼンス
-
IP 電話
-
モバイル エンドポイント
-
多目的テレプレゼンス
-
パーソナル コミュニケータ
-
パーソナル テレプレゼンス
-
ソフト クライアント
-
TelePresence エンドポイント
-
不明
各グループに属するデバイスを確認するには、そのグループのクイック ビュー アイコンの上にマウスを置き、[ルール(Rules)] をクリックします。
-
-
ユーザ定義グループ:次のいずれかになります。
-
スタティック:デバイスは、定義された一連のルールを使用せずに、これらのグループに追加されます。グループが作成された後に、手動でデバイスを追加できます。ルールを簡単に設定できないデバイスは、このグループに入ります。スタティック ユーザ定義グループだけが、[Device Group] から [Polling Parameters] ページの [Device Selector] ペインに同期されます。ダイナミック グループ内に作成されたスタティック グループも同期化されません。
-
ダイナミック:デバイスは、定義した一連のルールまたは属性(たとえば、デバイス タイプ、デバイス モデル、ホスト名など)に基づき、グループへのアクセス時に ダイナミック グループに追加されます。グループのプロパティを使用してルールを定義することができ、グループはルールが適用されたときに更新されます。
(注)
ユーザ定義のダイナミック グループの作成にかかる時間は、グループ内のメンバー数によって異なります。
-
ユーザ定義のダイナミックおよびスタティック グループの場合は、クイックビューを使用してサブグループを追加、ならびグループを編集、削除、複製することができます。ダイナミック グループの場合、ダイナミック サブグループを作成または追加すると、親のグループのルールを自動的に継承します。
クイック ビューを起動するには、マウス ポインタをデバイス グループの上に置き、[クイック ビュー(Quick View)] アイコンをクリックします。クイック ビューに表示されるユーザ定義グループの詳細は、次のとおりです。
フィールド |
説明 |
||
---|---|---|---|
Name |
デバイスの名前。 |
||
説明 |
デバイスの説明。 |
||
タイプ |
デバイスのタイプです。 |
||
グループ タイプ |
グループ タイプ(ダイナミックまたはスタティック)を表示します。 |
||
メンバー数 |
グループ内のメンバーの合計数が表示されます。 |
||
サブグループ数 |
グループ内のサブグループ数を表示します。グループには任意の数のサブグループを追加できます。 |
||
ルール数 |
グループに設定されているルールの数を表示します。
|
||
サブグループの追加 |
ダイナミック グループ内にスタティック グループを作成することも、その逆もできます。スタティック サブグループを作成した場合、親のダイナミック グループのルールは継承されません。スタティック サブグループは、任意の階層で作成された個別のグループです。 ダイナミック グループの場合、ダイナミック サブグループを作成すると、親のグループのルールを自動的に継承します。 |
||
グループの編集 |
|
||
グループの削除 |
|
||
グループの複製 |
ダイナミック グループで [グループの複製(Duplicate Group)] を実行すると、ルールのプロパティは新しいグループにコピーされます。 |
グループの作成
グループを作成するには、次の手順を実行します。
手順
ステップ 1 |
[デバイスグループ(Device Group)] ペインの右にあるアイコンをクリックします。 |
ステップ 2 |
[Create Group] をクリックします。 |
ステップ 3 |
[Create Group] ウィンドウで、グループ名と説明を入力します。 |
ステップ 4 |
[スタティック(Static)] または [ダイナミック(Dynamic)] のグループ タイプを選択します。 |
ステップ 5 |
ダイナミック グループの場合は、[すべて一致(Match as All)] または [任意の条件(Match as Any)] を選択してルールを設定し、ドロップダウン リストから適切な条件の組み合わせを選択します。 [+] をクリックすると複数のルールを設定できます。新しい行が追加されます。 |
ステップ 6 |
[保存(Save)] をクリックします。 |
グループにデバイスを追加
デバイスをグループに追加するには、次のようにします。
手順
ステップ 1 |
を選択します。 。Cisco Prime Collaboration リリース 11.5 以降の場合 移行方法 |
||
ステップ 2 |
[Current Inventory] テーブルから管理対象デバイスを選択します。 |
||
ステップ 3 |
[Current Inventory] ペインで右矢印をクリックします。 |
||
ステップ 4 |
[グループに追加(Add to Group)] を選択します。 |
||
ステップ 5 |
[グループに追加(Add To Group)] ウィンドウで、[グループの選択(Select Group)] ドロップダウンリストから目的のグループを選択し、[保存(Save)] をクリックします。
|
グループからデバイスを削除
デバイスを削除するには、次の手順を実行します。
手順
ステップ 1 |
を選択します。 。Cisco Prime Collaboration リリース 11.5 以降の場合 移行方法 |
ステップ 2 |
ページで、[現在のインベントリ(Current Inventory)] テーブルから管理対象デバイスを選択します。 |
ステップ 3 |
[Current Inventory] ペインで右矢印をクリックします。 |
ステップ 4 |
[グループから削除(Remove From Group)] を選択します。 |
ステップ 5 |
確認メッセージ ボックスで [OK] をクリックします。 |
デバイス グループ セレクタ
デバイス グループ セレクタはデバイスをフィルタ処理する方法で、[ポーリング パラメータ(Polling Parameters)] ページを開くには、を選択します。
を選択し、ポーリングするグループを選択します。Cisco Prime Collaboration リリース 11.5 以降の場合
選択
を選択し、ポーリングするグループを選択します。