ビデオ エンドポイントの監視
エンドポイントの診断ダッシュボードには、すべてののビデオ エンドポイントの詳細が表示されます。
Cisco Prime Collaboration リリース 11.6 以降の場合
の任意のエンドポイントをウォッチリストに追加して、さらに詳細なトラブルシューティングを行うことができます。
[ウォッチリストに追加(Add to Watch List)] および [ウォッチリストから削除(Remove from Watch List)] は、エンドポイントの 360° ビューにも含まれています。[ウォッチリストに追加(Add to Watch List)] を使用すると、会議をウォッチリストに追加することができます。これは、[Not In Use] および [In Use] の両方のエンドポイントで有効です。ステータスが [Not In Use] のエンドポイントの場合、エンドポイントが会議に参加するとトラブルシューティングが開始されます。ステータスが [In Use] であるエンドポイントに対しては、ただちにトラブルシューティングが開始されます。
Cisco Prime Collaboration リリース 11.5 以降の場合
(注) |
より詳しいトラブルシューティングを行うために、すべてのエンドポイントをウォッチリストに追加する必要はありません。 |
ページの左側にある [Device Group] ペインを使用して、デバイス タイプに基づいてエンドポイントをフィルタリングすることができます。詳細については、「デバイス グループの管理」を参照してください。
エンドポイントの診断ダッシュボード
エンドポイントの診断ダッシュボードには、すべてのビデオ エンドポイントの詳細が表示されます。
ページの左側にある [Device Group] ペインを使用して、デバイス タイプに基づいてエンドポイントをフィルタリングすることができます。詳細については、「デバイス グループの管理」を参照してください。
選択
をクリックして、エンドポイント診断ダッシュボードを表示します。次の表には、エンドポイントの診断ダッシュボードに表示される情報が示されています。
情報 |
説明 |
---|---|
エンドポイント サマリー メトリック |
次の詳細を提供します。
|
エンドポイントのリスト |
すべての登録済み、未登録、不明なエンドポイントに関する詳細情報を提供します。エンドポイントの登録、使用状況、および可視性のステータスを確認するには、このペインを使用できます。 |
エンドポイントの詳細 |
選択したエンドポイント タイプに基づいて次の詳細を提供します。
|
(注) |
Cisco Prime Collaboration リリース 11.5 以降の場合 TC/CE ソフトウェアで実行される、ビデオまたは TelePresence ポイントに接続された周辺機器(カメラやマイクなど)の詳細を表示できます。これは、SX、MX、EX シリーズのエンドポイントに適用されます。 Cisco Prime Collaboration リリース 11.6 以降の場合 TC/CE ソフトウェアで実行される、ビデオまたは TelePresence ポイントに接続された周辺機器(カメラやマイクなど)の詳細を表示できます。これは、CE イメージを使用する SX、MX、DX、および EX 一連のエンドポイントに適用可能です。 CE イメージを使用する ciscoDX70 および ciscoDX80 はエンドポイント診断をサポートされていません。 |
Cisco Prime Collaboration Assurance を MSP モードで導入した場合、エンドポイントが属するお客様を確認できます。Cisco Prime Collaboration Assurance を Enterprise で導入した場合、エンドポイントが属する Assurance ドメインを確認できます。[モデル(Model)]、[デバイス プール(Device Pool)]、[クラスタ名(Cluster Name)]、[IP アドレスの切り替え(Switch IP Address)] 列をフィルタリングすることができます。[フィルタ(Filter)] アイコンをクリックし、これらの列でドロップダウン リストの矢印をクリックします。ポップアップ ウィンドウに一覧が表示されます。
エンドポイントの診断ダッシュボードは CSV または PDF ファイルとしてエクスポートできます。このファイルには、ユーザ インターフェイスに表示される正確なデータが含まれています。
クイック ビュー アイコンをクリックすると、エンドポイント 360° ビューが表示されます。
エンドポイントの可視性を変更するには、[可視性の変更(Edit Visibility)] をクリックします。
[エンドポイントの診断(Endpoint Diagnostics)] フィルタに保存されているフィルタは、正常に保存されません。保存されたフィルタは現在のセッションのみに存在し、更新/ログアウト後にクリアされます。
Cisco Prime Collaboration リリース 12.1 SP2 以降の場合
(注) |
新規インストール(Cisco Prime Collaboration Assurance 12.1 SP2)では、エンドポイントの可視性設定はデフォルトで [OFF] 状態になっています。以前のバージョン(Cisco Prime Collaboration Assurance 11.6、Cisco Prime Collaboration Assurance 12.1 FCS/ES1/ES2/ES3/ES4/SP1/ など)から Cisco Prime Collaboration Assurance SP2 にアップグレードしているときに、インストールのルーチンでは、すでに管理されているエンドポイントのデフォルトの可視設定を保持します。 |
Cisco Prime Collaboration リリース 12.1 SP2 以降の場合
TC/CE エンドポイントの可視性を変更すると、選択したエンドポイントでフィードバック サブスクリプションにエラーがある場合、「1 つ以上の TC_CE エンドポイントにフィードバック サブスクリプション エラーがあります。[管理ステータスの原因列を確認してください(Check Management Status Reason)] という警告メッセージが表示されます。
エンドポイントの現在の可視性が表示されます。何らかの変更を加えた場合は、[保存(Save)] をクリックします。詳細については、「エンドポイントのリアルタイムの可視性」を参照してください。エンドポイント名の直前にあるアイコンにポインタを合わせると、エンドポイントの可視性ステータスがエンドポイント 360° ビューで表示されます。
エンドポイント 360° ビューでは、[ウォッチリストに追加(Add to Watch List)] および [ウォッチリストから削除(Remove from Watch List)] も表示されます。[ウォッチリストに追加(Add to Watch List)] を使用すると、会議をウォッチリストに追加することができます。これは、[Not In Use] および [In Use] の両方のエンドポイントで有効です。[Not In Use] のエンドポイントの場合、エンドポイントがセッション会議に参加するとトラブルシューティングが開始します。ステータスが [In Use] であるエンドポイントに対しては、ただちにトラブルシューティングが開始されます。
エンドポイントでは、次のテストを実行できます。
-
On-Demand Phone Test:エンドポイントを選択し、「テストの実行および音声電話機の機能テスト(Run Tests > Audio Phone Feature Test)] をクリックします。On-Demand Phone Test の詳細については、「On Demand Phone Test」 を参照してください。
-
Synthetic - End-to-End Call Test:エンドポイントを選択し、[テストの実行および音声テスト コール(Run Tests > Audio Test Call)] をクリックします。End-to-End Call Test テストの詳細については、「Synthetic Tests」 を参照してください。
-
Video Test Call:2 つのビデオ エンドポイントを選択し、[テストの実行および音声テスト コール(Run Tests > Video Test Call)] をクリックします。Video Test Call の詳細については、「Video Test Call」を参照してください。
(注)
Cisco Prime Collaboration Assurance を MSP モードで導入した場合、[Video Test Call] 機能は使用できません。
不明なエンドポイントの一覧を表示するには、ユーザ インターフェイスの左側にある [デバイス グループ セレクタ(Device Group Selector)] ペインで [定義済みおよび不明なエンドポイント(Predefined > Unknown Endpoints)] を選択します。
(注) |
Polycom エンドポイントは Cisco VCS に登録されている場合だけをモニタされます。Polycom コール コントローラに登録されたときにはモニタされません。自動コール検出は HTTP フィードバックを使用してサポートされます(Cisco VCS を使用します)。会議の統計や会議の情報など、リアルタイムのモニタリングに関する情報はサポートされていません。 |
デフォルトでは、[エンドポイントの診断(Endpoints Diagnostics)] ページの自動更新機能は無効になっています。2 分ごとの自動更新を有効または無効にするには、ユーザ インターフェイスの右上隅にある [自動更新(Auto Refresh)] チェックボックスをオンにします。
自動更新機能を無効にし、後でアプリケーションにログインすると、機能は無効のままになっています。有効にするには、[自動更新(Auto Refresh)] チェックボックスを再度オンにします。
(注) |
Cisco Prime Collaboration リリース 11.5 以降の場合 音声またはビデオのエンドポイントが 1 つの Unified Communications Manager クラスタから別の Unified Communications Manager クラスタに移動すると、Cisco Prime Collaboration Assurance は、エンドポイントが現在登録されているクラスタのデバイス情報のみを表示します。いくつかのフィールド(例:デバイス プール)のデバイス情報は、夜間に実行されるクラスタ検出の後に表示されます。そのため Cisco Prime Collaboration Assurance は、以前の Unified Communications Manager クラスタと現在のクラスタの間で数が一致しない未登録のエンドポイントを表示します。以前のエントリが Unified Communications Manager にパージされると、正しい数の未登録のエンドポイントが表示されます。 |
ユーザ詳細の 360° ビューを表示
このビューには、Cisco Unified Communications Manager または Cisco TelePresence Management Suite(TMS)エンドポイントに関連付けられているエンドユーザの情報(ユーザ名、電子メール ID、オフィス電話番号、携帯電話番号など)が表示されます。エンドユーザの写真とロケーションの詳細は、Cisco Prime Collaboration Assurance が LDAP と統合されていて、ユーザ名詳細が LDAP 詳細と一致している場合にのみ表示されます。
(注) |
TMS に関連付けられているエンドユーザ情報は、「TMS プロビジョニング拡張機能」コンポーネントが TMS にインストールされている場合にのみ取得できます。 |
このビューにアクセスするには、以下を行います。
手順
ステップ 1 |
グローバル検索ドロップダウンから、[ユーザ(User)] を選択します。[エンドポイントの診断(Endpoint Diagnostics)] ページの [ユーザ名(Username)] 列から ユーザ 360 を起動することもできます。 |
ステップ 2 |
* を入力すると、すべてのユーザが一覧表示されます。文字列検索によって、より具体的な結果を得ることができます。たとえば、test と入力すると、名、姓、またはユーザ名に「test」という文字列が含まれているすべてのユーザが一覧表示されます。 |
ステップ 3 |
ユーザ名に対応する [ユーザ 360 ビュー(User 360 View)] 起動アンカーをクリックします。 |
このビューの以下のタブにアクセスします。
-
[エンドポイント(Endpoints)]:エンドユーザに関連付けられている管理対象エンドポイントが表示されます。このエンドポイントには、次が含まれます。
-
[前回の通話品質(Last Call Quality)]:good、accepted、poor に分類されます。このフィールドには、最後に終了したコールの通話品質が示されています。CUCM に登録されているエンドポイントの [CMRレポート(CMR Report)]、または TMS に登録されているエンドポイントの [アラーム(Alarms)] ページを起動できます。
-
コール(24 時間):過去 24 時間に発生した、エンドポイントが関与したコールの数。このフィールドは、Unified CM に登録されたエンドポイントの CDR レポート、および TMS に登録されたエンドポイントの全会議サマリー レポートから、を起動できます。
-
[登録ステータス(Registration Status)]:エンドユーザの登録ステータスが表示されます。コールが進行中の登録済みエンドユーザの場合、コール進行中インジケータである緑色のアイコンが表示されます。登録されていないエンドユーザの場合は赤色のアイコンが表示され、エンドユーザのステータスが不明な場合はグレーのアイコンが表示されます。
-
[サービス(Service)]:最後に終了したコールのサービス(音声のみ、または音声とビデオ)。
-
[エンドポイントモデル(Endpoint Model)]:エンドポイント モデルが表示されます。クリックすると、[エンドポイントの診断(Endpoint Diagnostics)] ページを起動します。
-
-
[アクティブ会議(Active Conferences)]:現在通話中のエンドユーザのエンドポイントが表示されます。デバイスの詳細は、会議診断から追跡されます。[アクティブ会議(Active Conferences)]には次のものが含まれています。
-
エンドポイントと接続先番号の画像。画像をクリックすると、[エンドポイントの診断(Endpoint Diagnostics)] ページが起動されます。
-
[品質統計(Quality stats)]:通話品質アラームの現在の最高重大度を示すアラーム アイコン。
-
Cisco Prime Collaboration リリース 11.1 以前の場合
[ツール(Tools)]:トラブルシューティング ページへのリンク。
-
-
[アラーム(Alarms)]:以下を表示します。
-
Severity
-
アラームを受信したソース
-
アラームの名前
-
タイムスタンプ
-
(注) |
Unified CM に登録されているエンドポイントの場合は、新しいユーザの同期が自動的に行われます。TMS に登録されたエンドポイントを除いて、新しいユーザの詳細を同期するには、TMS を手動で再検出する必要があります。 |
ビデオ テスト コールの管理
Managed の状態にある 2 つのビデオ エンドポイント間で、ビデオ テスト コールをポイントツーポイントで作成し、ネットワークをテストすることができます。Medianet の統計を使用し、イベントとアラーム、会議の統計、エンドポイントの統計。このコールでは、CTS、C および EX シリーズのコーデックのみがサポートされています。
(注) |
|
タスク | 説明 | ||||
---|---|---|---|---|---|
|
または
[テストコールの追加(Add Test Call)] ウィンドウが表示され、エンドポイントの IP アドレスをクリックすると、そのアプリケーションが起動します。デフォルトでは、テスト コールは即座に実行されますが、スケジュールを設定することもできます。 CTS エンドポイントの場合は、SIP プロトコルのみを選択してください。Ex および C シリーズのエンドポイントの場合、H.323 と SIP のいずれかのプロトコルを選択できますが、これらのエンドポイントがこれらのプロトコルを使用して登録されている必要があります。[コールの追加(Add Call)] ボタンをクリックすると、コールが正常に追加されたことを通知するメッセージが表示されます。 スケジュール済みのコールの詳細を、[会議の診断(Conference Diagnostics)] ページで確認できます。Medianet の統計を使用し、イベントとアラーム、会議の統計、エンドポイントの統計。この情報は、テスト コールが完了した後でも確認できます。コールによってネットワークの問題が発生した場合は、すぐにコールを停止することができます。 |
||||
実行中のビデオ テスト コールの停止 |
ビデオ テスト コールによってネットワークに問題が起きた場合は、コールを停止することができます。コールを停止するには、[会議の診断(Conferences Diagnostic)] ページでフィルタに [テストコール会議(Test Call Conferences)] を設定して、テストするコールを選択します。会議の件名にマウス カーソルを合わせると、360° 会議ビューが表示され、[コール停止(Stop Call)] アイコンをクリックすると、進行中のビデオ テスト コールが停止します。 テスト コールは約 5 分間継続し、その後自動的に停止します。 |
||||
スケジュール済みのビデオ テスト コールを [ビデオ テスト コールの設定(Video Test Call Configurations)] ページで編集する 同じページからビデオ テスト コールを表示または削除することもできます。 |
[編集(Edit)] をクリックしてビデオ テスト コールを編集し、[保存(Save)] をクリックするとコールを再スケジュールまたは即座に実行できます。コールが正常に変更されたことを通知するメッセージが表示されます。 |