クラスタのセットアップ
Cisco Prime Collaboration Assurance は、次のクラスタを管理します。
-
Cisco TMS
-
Cisco VCS
-
Cisco Unified CM
ネットワーク内で複数の Cisco TelePresence Management Suite(TMS)を使用している場合は、クラスタ内でこれらのアプリケーションを設定して、Cisco Prime Collaboration Assurance アプリケーションが管理できるようにする必要があります。つまり、Cisco Prime Collaboration Assurance は 2 つのスタンドアロン型 TMS を管理できないということです。
Cisco Prime Collaboration Assurance は、アプリケーション サーバのみを監視します。データベース インスタンスはモニタしません。クラスタ内のすべての Cisco TMS アプリケーション サーバに対して状態ポーリングが実行されます。
TMS クラスタの場合、会議の詳細は、[クラスタの管理(Manage Clusters)] ページで定義されたプライマリ Cisco TMS からインポートされます。
Cisco Prime Collaboration Assurance を MSP モードで導入した場合は、CTX クラスタも管理できます。Cisco Prime Collaboration Assurance は、複数の CTX クラスタを管理できません。クラスタ内の CTX 管理サーバに対して状態ポーリングが実行されます。CTX クラスタの場合、セッションの詳細はプライマリ管理サーバからインポートされます。
Cisco TelePresence Manager、Cisco TMS クラスタ
Cisco TelePresence Manager、Cisco TMSクラスタを検出する前に、クラスタの詳細を [クラスタの管理(Manage Cluster)] ページに入力する必要があります。Cisco TelePresence Manager または Cisco TMS の検出中に、Cisco Prime Collaboration Assurance は、クラスタの詳細とデバイスのクレデンシャルを使用し([デバイスインベントリ(Device Inventory)] > [インベントリ管理(Inventory Management)] > [クレデンシャルの管理(Manage Credentials)])、管理アプリケーションを検出します。
(注) |
CTX クラスタを追加するには、プライマリ CTX 管理サーバに API ロールを持つ新しいユーザを作成してください。この手順の詳細については、「Prime Collaboration Assurance 用のデバイスをセットアップ」のページを参照してください。 |
Cisco Prime Collaboration リリース 11.5 以降の場合
(注) |
Cisco TelePresence Manager と Cisco TelePresence Exchange(CTX)クラスタはサポートされていません。 |
Cisco TMS クラスタを検出する前に、[クラスタの管理(Manage Cluster)] ページでクラスタの詳細を入力する必要があります。Cisco TMS の検出中に、Cisco Prime Collaboration Assurance は、クラスタの詳細とデバイスのクレデンシャルを使用し(
)、管理アプリケーションを検出します。Cisco TMSのクラスタを管理するには、次のようにします。
手順
ステップ 1 |
選択 。Cisco Prime Collaboration リリース 11.5 以降の場合 移行方法 |
ステップ 2 |
[インベントリの管理(Inventory Management)] ページで、[CTS-MAN/TMS クラスタの管理(Manage CTS-MAN/TMS Cluster)] をクリックします。 Cisco Prime Collaboration リリース 11.5 以降の場合 [インベントリの管理(Inventory Management)] ページで、[TMS クラスタの管理(Manage TMS Cluster)] をクリックします。 Cisco Prime Collaboration Assurance を MSP モードで展開した場合は、[TMS クラスタの管理(Manage TMS Clusters)] をクリックします。 |
ステップ 3 |
[クラスタの管理(Manage Cluster)] ウィンドウでクラスタ名を入力し、[クラスタタイプ(Cluster Type)] ドロップダウンリストから項目を選択します。 |
ステップ 4 |
TMS クラスタの場合は、プライマリ アクティブ サーバ、セカンダリ アクティブ サーバ、またはパッシブ サーバの IP アドレスを入力します。 Cisco Prime Collaboration リリース 11.5 以降の場合 TMS クラスタの場合は、プライマリ アクティブ サーバ、セカンダリ アクティブ サーバ、またはパッシブ サーバの IP アドレスを入力します。 |
ステップ 5 |
[追加(Add)] をクリックして、新しいクラスタを追加します。 これらのクラスタを検出するための論理検出を実行します。論理検出の詳細については、「デバイスの検出方法」を参照してください。ネットワークで初めてクラスタを検出する際に、CTS-MAN と TMS のクラスタに対して、プライマリ、セカンダリ、ホット スタンバイ、およびロードバランサ サーバの詳細を入力できます。後でインベントリの更新や再検出を行う際は、CTS-MAN と TMS クラスタのプライマリ サーバの詳細を入力するだけで済みます。 |