Cisco Prime Infrastructure ユーザ インターフェイスの参照
Cisco Prime Infrastructureは Web ベースのアプリケーションです。
インストール済みの Cisco Prime 製品のいずれかがライセンスによって有効化されていない場合、それらの機能のメニュー項目やオプションは Web インターフェイスに表示されません。
Cisco Prime Infrastructure ユーザ インターフェイスについて
Cisco Prime Infrastructureは Web ベースのアプリケーションです。
インストール済みの Cisco Prime 製品のいずれかがライセンスによって有効化されていない場合、それらの機能のメニュー項目やオプションは Web インターフェイスに表示されません。
初めて Prime Infrastructure にログインした際に、オーバーレイ ウィンドウにグラフィカル インターフェイスの主要コンポーネントが表示されます。このオーバーレイ ウィンドウを再度表示するには、画面の右上にあるログイン名をクリックし、 を選択します。
図 58-1 に表示されているツールバーは、各ページの上部にあります。
1 |
クリックすると、メニューが開きます。 |
2 |
クリックすると、cisco.com の Prime Infrastructure 製品ページに移動します。 |
3 |
Prime Infrastructure 内のデータを検索するときに入力します。IP アドレス、ユーザー名、アプリケーション名、または設定アーカイブの一部またはすべてなど、テキスト文字列を入力できます。uration archives. 検索結果には、アクセス ポイント、アラーム、変更監査、設定アーカイブ、デバイスなどの情報が表示されます。検索結果を CSV 形式および PDF 形式でエクスポートするには、右隅にあるエクスポート アイコンをクリックします。 |
4 |
アラームの数が表示されます。色は使用しているネットワーク内の最も重大度が高いアラームに対応しています。クリックすると、アラーム概要ウィンドウにすべてのアラームが表示され、重大度別(クリティカル、メジャー、マイナー)にアラームの数が示されます。 |
5 |
割り当てられているログイン名と仮想ドメインが表示されます。ユーザ設定の変更、パスワードの変更、ログアウト、ヘルプへのアクセス、製品フィードバックの送信を行う際にクリックします。 |
[ドック(Dock)] ウィンドウ
通常、Cisco Prime Infrastructure 内のサブセクション ページを閲覧する場合、[ドック(Dock)] ウィンドウにそのページに簡単に移動できる方法が表示されます。Cisco Prime Infrastructure の任意のページから、[ドック(Dock)] アイコン(右上隅)をクリックすることができます。
- 現在のページに関連するビデオへのリンク
- 最近アクセスしたページへのリンク(最大 15 個)
- お気に入りとしてマークされたページへのリンク(最大 15 個)
- ピン止めした項目
[ドック(Dock)] ウィンドウは閉じるまで開いた状態を維持します。
[ドック(Dock)] ウィンドウへのデバイスのピン止め
特定のデバイスを詳細に確認する場合は、[ドック(Dock)] ウィンドウにデバイスをピン止めできます。最大 15 個の項目をピン止めできます。
手順
ステップ 1 |
[デバイスの 360 度ビュー(Device 360° View)] で [ドックへの追加(Add to Doc)] アイコンをクリックします。 デバイスは、[ドック(Dock)] ウィンドウの [ピン止めした項目(Pinned Items)] セクションに表示されます。 |
ステップ 2 |
Prime Infrastructure の任意の場所にある [ドック(Dock)] ウィンドウのデバイスのリンクをクリックすると、[デバイスの 360 度ビュー(Device 360° View)] に更新済み情報が表示されます。 |
ステップ 3 |
[ドック(Dock)] ウィンドウから項目を削除するには、項目の横にある [ごみ箱(Trash)] アイコンをクリックします。[ピン止めした項目(Pinned Items)] から削除されます。 |
フィルタ
フィルタ機能を使用すると、Cisco Prime Infrastructure インターフェイスに関する特定の情報を表示できます。データが表形式で表示される際は常に [フィルタ(Filter)] アイコンが表示されます。次のタイプのフィルタを使用できます。
- クイック フィルター-を参照してください クイック フィルター 。
- フィルター オプションの設定-を参照してください フィルターを高度な 。
- ダッシュ ボード フィルター-を参照してください ダッシュ ボード フィルター 。
クイック フィルタ
このフィルタを使用すると、フィルタを特定のテーブル列に適用することで、テーブル内のデータを絞り込むことができます。さまざまな演算子を適用するには、[高度なフィルタ(Advanced Filter)] オプションを使用します(「高度なフィルタ」を参照)。
クイック フィルタを起動するには、[フィルタ(Filter)] ドロップダウン リストから [クイックフィルタ(Quick Filter)] を選択します。
クイック フィルタをクリアするには、[フィルタ(Filter)] をクリックします。
詳細フィルタ
このフィルタを使用すると、Does not contain、Does not equal、Ends with、Is empty など、複数の演算子を使用してフィルタを適用することによって、表内のデータを絞り込むことができます。たとえば、ドロップダウン リストからフィルタ パターン(テーブル列名ごと)と演算子を選択できます。さらに、Prime Infrastructureデータベースで使用可能なデータに基づいて、フィルタ基準を入力する必要があります。
拡張フィルタ機能を起動するには、[フィルタ(Filter)] ドロップダウン リストから [拡張フィルタ(Advanced Filters)] を選択します。
拡張フィルタで使用するフィルタ基準を保存するには、次の手順を実行します。
手順
ステップ 1 |
拡張フィルタの基準を入力して、[実行(Go)] をクリックします。フィルタ基準に基づいて、データがフィルタリングされます。 |
ステップ 2 |
データがフィルタリングされたら、[保存(Save)] アイコンをクリックします。 |
ステップ 3 |
[プリセットフィルタの保存(Save Preset Filter)] ダイアログボックスで、プリセット フィルタの名前を入力して、[保存(Save)] をクリックします。 |
ダッシュボード フィルタ
[Filters] ツールバーを使用すると、ダッシュボードのすべてのダッシュレットに表示するデータを絞り込むことができます。このツールバーを使用し、以下の基準によってダッシュレットのデータをフィルタリングできます。
-
[Time frame]:いずれかのプリセット オプションを選択するか、カスタムのタイム フレームを作成します。
- クライアント —クライアント属性を選択または入力します。
(注)
クライアント ユーザー名フィールドは、 "(二重引用符)以外の特殊文字をサポートしています。
-
[Applications]:1 つのサービス、最大 10 個のアプリケーション、またはすべてのアプリケーションを選択します。
-
[ネットワーク対応(Network Aware)]:有線、ワイヤレス、またはすべてのネットワークを選択します。
- [サイト(Site)]:1 つのサイト、未割り当てサイト、またはすべてのサイトを選択します。
ダッシュボードのすべてのダッシュレット向けにデータをフィルタリングするには、次の手順を実行します。
手順
ステップ 1 |
ダッシュボードを開きます(例: を選択)。 |
ステップ 2 |
[フィルタ(Filters)] ツールバーで任意のオプションの設定を変更し、[実行(Go)] をクリックします。 |
データ入力機能
大部分のユーザ インターフェイスには、チェックボックスに加えて、ドロップダウン リストとデータ入力フィールドがあり、Cisco Prime Infrastructure ではいくつかの専用データ入力機能が使用されます。これらの機能の目的はネットワークのビューを可能な限り整えることですが、ユーザは、必要に応じて、独自の設定を追加、更新、保存することができます。これらの専用データ入力機能は、次のとおりです。
- 編集テーブル
- データ ポップアップ
編集テーブル
Cisco Prime Infrastructure では、サイト、デバイス、イベントのリストなど、テーブルを使用してさまざまな種類のデータが表示されます。スプレッドシートと同様に、データは行と列に配置されます。
編集テーブルは他のテーブルとは異なり、そこに含まれているデータを追加、編集、削除することができます。一部の編集テーブルでは、フィルタにアクセスすることもできます(「フィルタ」を参照)。通常、編集テーブルは、チェックボックスをオンにすると開くデータ ポップアップに表示されます。
編集テーブルの使用方法:
- 編集テーブルに新規行を追加するには:
[+] アイコンをクリックし、新しい行のフィールドに入力して [保存(Save)] をクリックします。
- 編集テーブルから 1 つ以上の既存の行を削除するには:
行ヘッダーのチェックボックス(各行の左端)を選択して、[削除(Delete)] をクリックします。
- 編集テーブルの行でフィールドのエントリを更新するには:
行ヘッダーまたはフィールドをクリックし、内容を編集して [Save] をクリックます。
データのポップアップ
データ ポップアップは、チェックボックス、固定フィールド、その他のデータ入力機能に関連するウィンドウです。機能を選択すると自動的に表示されるので、機能に関連するデータを表示したり更新することができます。データ ポップアップには、チェックボックス、ドロップダウン リスト、データ入力フィールドに加えて、編集テーブルが含まれていることがあります。
データ ポップアップを使用するには:
-
データ ポップアップを開く機能(固定フィールドやチェックボックスなど)を選択します。
-
関連するポップアップが表示されるので、必要に応じてフィールドを表示または更新します。
-
作業が完了したら、データ ポップアップの外側をクリックします。新しい情報を入力したり、既存の情報を変更した場合は、変更内容が自動的に保存されます。
インタラクティブ グラフ
Cisco Prime Infrastructure は、時間ベースと非時間ベースの両方のデータのインタラクティブな折れ線、面積、円、積み積み重ね棒グラフを提供します。インタラクティブ グラフには次の機能が含まれています。
- 自動更新のサポート:グラフは事前に設定された間隔で自動的に更新されます。
- 次の 2 つのグラフ ビューがあります。
- グラフ(チャート)ビュー(デフォルト)
- テーブル(グリッド)ビュー
- グラフの拡大
関連項目
インタラクティブ グラフの使用方法
次の表は、インタラクティブ グラフの使用方法の要約を示しています。
手順は次のとおりです。 |
操作手順 |
---|---|
グラフ ボタンを使ってヘルプを参照する |
マウス カーソルをボタンの上に置きます。Cisco Prime Infrastructureボタンを説明するポップアップ ツールチップが表示されます。 |
データをグラフまたはチャートとして表示する |
[チャートで表示(View in Chart)] をクリックします。 |
グリッドまたは表形式でデータを表示する |
[グリッドで表示(View in Grid)] をクリックします。 |
グラフを拡大する |
グラフの右下にあるボタンをクリックします。Cisco Prime Infrastructure は別のページのかグラフの拡大バージョンが表示されます。新しいページでは [View in Chart] と [View in Grid] 切り替えボタンを使用できるので、表示する拡大グラフの種類を変更できます。 |
関連項目
時間ベースのグラフ
一部のグラフには時間ベースのデータが表示されます。時間ベースのグラフの場合、Cisco Prime Infrastructure ではグラフの上にリンク バーが表示されます。リンク バーには、チャートのデータ タイプに応じた標準のタイムフレーム(直近 6 時間、1 日など)を示す一連のリンクが含まれています。これらのタイムフレーム リンクのいずれかを選択すると、そのタイム フレームのデータが取得され、グラフが更新されてそのタイムフレームのデータのみが表示されます。
時間ベースのグラフに表示されるタイムフレーム リンクには、以下のオプションがあります。
- [6h]:現在の時刻から最近の 6 時間分のデータを表します。データは、現在のデータベース テーブルから収集されます。
- [1d]:現在の時刻から最近の 1 日(24 時間)分のデータを表します。データは、現在のデータベース テーブルから収集されます。
- [1w]:現在の時刻から最近の 1 週間(7 日間)分のデータを表します。データは、時間単位で集積したテーブルから収集されます。
- [2w]:現在の時刻から最近の 2 週間分のデータを表します。データは、時間単位で集積したテーブルから収集されます。
- [4w]:現在の時刻から最近の 4 週間分のデータを表します。データは、時間単位で集積したテーブルから収集されます。
- [3m]:現在の時刻から最近の 3 ヵ月間分のデータを表します。データは、日単位で集積したテーブルから収集されます。
- [6m]:現在の時刻から最近の 6 ヵ月間分のデータを表します。データは、週単位で集積したテーブルから収集されます。
- [1y]:現在の時刻から最近の 1 年間(12 ヵ月間)分のデータを表します。データは、週単位で集積したテーブルから収集されます。
- [カスタム(Custom)]:ユーザが選択した期間。開始日時と終了日時を設定できます。現在のデータを使用するのか、または時間単位、日単位、週単位で集積したデータ元を使用するのかは、選択した開始日によって変わります。
時間ベースのグラフに表示される集約データのデフォルトの最大および最小保持期間は、Cisco Prime Infrastructure の管理者によって制御されます。詳細については、関連項目の「履歴データの保持について」を参照してください。
関連項目
一般的な UI タスク
Cisco Prime Infrastructure のほぼすべてのウィンドウから、次のアクションを実行できます。
[デバイス360度ビュー(Device 360° View)] からのデバイス詳細の取得
[デバイス 360 度ビュー(Device 360°View)] には、デバイス ステータス、インターフェイス ステータス、関連するデバイス情報など、詳細なデバイス情報が表示されます。デバイスの IP アドレスが表示されるほぼすべてのページで [デバイス 360 度ビュー(Device 360°View)] を表示できます。
(注) |
[360° ビュー(360° View)] ダイアログで、[ネイバー(Neighbors)] タブに移動し、IP アドレスの横にある情報アイコンをクリックして、ループしたデバイスの 360° ビューを表示します。 |
図 58-5 は [デバイス360度ビュー(Device 360° View)] の一例を示しています。
(注) |
[デバイス 360 度ビュー(Device 360°View)] に表示される機能は、デバイス タイプによって異なります。 |
[デバイス 360 度ビュー(Device 360°View)] の機能 |
説明 |
||
---|---|---|---|
デバイスのステータス |
デバイスが到達可能かどうか、管理されているかどうか、および Cisco Prime Infrastructure データベース、CPU使用率、メモリ使用率が同期されているかどうかを示します。[すべて表示(Show All)] をクリックすると、デバイスのメモリ使用率のインスタンスがすべて表示されます。 |
||
[アクション(Action)] ドロップダウン リスト |
[デバイス 360 度ビュー(Device 360°View)] の右上にある [アクション(Action)] ドロップダウン リストから、次のいずれかのオプションを選択します。
|
||
アラーム |
アラーム ステータス、タイム スタンプ、およびカテゴリなど、デバイスのアラームがリストされます。 |
||
モジュール |
デバイス モジュールと、それらの名前、タイプ、状態、およびポートがリストされます。 |
||
インターフェイス |
デバイス インターフェイスと、各インターフェイスの上位 3 つのアプリケーションがリストされます。設定済みの VRF を表示します(ルータおよび Nexus デバイスの場合のみ)。 |
||
ネイバー |
ネイバーのインデックス、ポート、デュプレックス ステータス、および IP アドレスなど、デバイスのネイバーがリストされます。このタブでは、[タイプ(Type)] 列にデバイス タイプ(CDP や LLDP など)も表示されます。近接デバイスが Cisco Prime Infrastructure で管理されている場合、デバイス名にはデバイスの詳細ページへのリンクが含まれ、情報アイコンを使用してデバイス 360 度ビューを起動できます。 |
||
シビック ロケーション |
デバイスのネットワーク モビリティ サービス プロトコル(NMSP)ステータス、都市アドレス、およびロケーションの詳細が表示されます。 |
||
ワイヤレスインターフェイス |
インターフェイス名、関連する WLAN、VLAN ID、IP アドレスがリストされます。 |
||
WLAN |
WLAN 名、SSID、セキュリティ ポリシー、およびクライアント数がリストされます。 |
||
最近の変更 |
選択したデバイスのユーザが行った最新の監査変更が 5 つ表示されます。これらの変更は次のように分類されます。
|
||
仮想ドメイン |
このタブには、特定のデバイスがメンバーになっている仮想ドメインの名前が一覧表示されます。 |
関連項目
Internet Explorer と Google Chrome で Telnet と SSH を使用してデバイスに接続する
はじめる前に
Internet Explorer および Chrome に Telnet と SSH のブラウザ プラグインがインストールされていることを確認します。
Internet Explorer での Telnet クライアント機能の有効化
32 ビット Internet Explorer を搭載した 64 ビット Windows オペレーティング システムで Telnet クライアント機能を有効にするには、次の手順を実行します。
手順
ステップ 1 |
コントロール パネルで Telnet クライアントを開きます。
|
||
ステップ 2 |
Windows ディレクトリの System32 から同じディレクトリの SysWOW64 に、telnet.exe の 64 ビット バージョンをコピーします。 |
||
ステップ 3 |
32 ビット バージョンの Internet Explorer の次のレジストリ キーを追加します。
例:
|
||
ステップ 4 |
System32\en-US\telnet.exe.mui ファイルを SysWOW64 \ en-US フォルダにコピーします。 |
SSH の有効化
Internet Explorer で SSH セッションを開始するには、次の手順を実行します。
手順
ステップ 1 |
以下の内容を含む ssh.reg というファイルを作成します。 例:
|
||
ステップ 2 |
このファイルを実行して Windows レジストリに情報を追加します。
|
[ユーザ360度ビュー(User 360° View)] からのユーザ詳細の取得
[User 360°View] には、エンド ユーザに関する以下の詳細情報が表示されます。
- エンド ユーザのネットワーク接続とアソシエーション
- 認証と認可
- ユーザのネットワーク接続に関連するネットワーク デバイスの潜在的な問題
- アプリケーション関連の問題
- 広範囲のネットワークにおけるその他の問題
ユーザの 360°ビューにアクセスするには、次の手順を実行します。
手順
ステップ 1 |
を選択します。 |
||||||||||||||
ステップ 2 |
[ユーザ名(User Name)] 列の下のユーザ名の横にある展開アイコンをクリックします。[ユーザ 360 度ビュー(User 360°View)] を表示できます。 次の図に [ユーザ 360 度ビュー(User 360° View)] の例を示します。
|
[ルータ360度ビュー(Router 360° View)] からの VRF 詳細の取得
ルータの 360 度ビューには、次のルーティング プロトコルの VRF の詳細が表示されます。
- BGP ルーティング
- BGP ネイバー
- EIGRP ルーティング
- EIGRP ネイバー
ルータの 360 度ビューを使用して VRF 詳細を表示するには、次の手順を実行します。
手順
ステップ 1 |
を選択します。 |
ステップ 2 |
[デバイス グループ(Device Groups)] ペインで を選択します。 |
ステップ 3 |
詳細を表示するルータを選択します。 ルータの詳細が右側のペインに表形式で表示されます。 |
ステップ 4 |
ルータの IP アドレスの横にある情報アイコンをクリックします。 |
ステップ 5 |
ルータの 360 度ビューで、 を選択します。 |
ステップ 6 |
[VRF の選択(Select a VRF)] ドロップダウン リストから VRF を選択し、ルーティングの詳細を表示するプロトコルを選択します。 |
検索方法
Cisco Prime Infrastructure には次の検索方法が用意されています。
- アプリケーション検索:「アプリケーション検索の使用」を参照してください。
- 詳細検索:「詳細検索の使用」を参照してください。
- 保存した検索:「保存した検索の使用」を参照してください。
検索オプションには、Cisco Prime Infrastructure 内のどのページからもアクセスできます。
アプリケーション検索機能の使用
Prime Infrastructure 内ですばやくデータを検索するために、任意のテキスト文字列を入力できます。たとえば、クライアントを検索する場合は、IP アドレスやユーザ名の一部またはすべてを入力できます。
手順
ステップ 1 |
画面右下の [Search] アイコンをクリックします。 |
||
ステップ 2 |
[検索(Search)] テキスト ボックスで、検索文字列を入力し、[検索(Search)]Prime Infrastructure をクリックします。 [アプリケーション検索] テキスト ボックスに複数の文字列を入力すると、指定されたすべてのキーワードに一致するすべての結果が返されます。管理対象デバイス、クライアント、アラーム、設定アーカイブ、変更監査、およびマップをアプリケーションとは別に検索することもできます。
|
||
ステップ 3 |
[リストの表示(View List)] をクリックして、[モニタ(Monitor)] ページまたは [設定(Configuration)] ページから一致するデバイスを表示します。 |
詳細検索機能の使用
手順
ステップ 1 |
画面右下の [Search] アイコンをクリックします。 |
||
ステップ 2 |
[検索(Search)] プルダウン メニューから、[高度な検索(Advanced Search)] を選択します。 |
||
ステップ 3 |
[高度な検索(Advanced Search)] ダイアログボックスで、[検索カテゴリ(Search Category)] ドロップダウン リストからカテゴリを選択します。 |
||
ステップ 4 |
検索に適用できるすべてのフィルタまたはパラメータを選択します。
|
||
ステップ 5 |
検索を保存するには、[検索の保存(Save Search)] チェックボックスを選択して、テキストボックスに検索の一意の名前を入力し、[実行(Go)] をクリックします。
検索カテゴリは以下のとおりです。
|
アラームの検索
アラームの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
||
---|---|---|---|
重大度(Severity) |
[すべての重大度(All Severities)]、[CriticalMajor]、[メジャー(Major)]、[マイナー(Minor)]、[警告(Warning)]、または [クリア(Clear)] を選択します。 |
||
[アラームカテゴリ(Alarm Category)] |
[すべてのタイプ(All Types)]、[システム(System)]、[アクセスポイント(Access Points)]、[コントローラ(Controllers)]、[カバレッジホール(Coverage Hole)]、[設定監査(Config Audit)]、[モビリティサービス(Mobility Service)]、[コンテキスト認識型通知(Context Aware Notifications)]、[SEにより検出された干渉(SE Detected Interferers)]、[メッシュリンク(Mesh Links)]、[不正AP(Rogue AP)]、[アドホック不正(Adhoc Rogue)]、[セキュリティ(Security)]、[パフォーマンス(Performance)]、[アプリケーションパフォーマンス(Application Performance)]、[ルータ(Routers)]、[スイッチとハブ(Switches and Hubs)] または [Ciscoインターフェイスおよびモジュール(Cisco Interfaces and Modules)] を選択します。 |
||
条件 |
ドロップダウン リストを使用し、条件を選択します。また、このドロップダウン リストに入力して、条件を入力することもできます。
|
||
[期間(Time Period)] |
[随時(Any Time)] から [過去 7 日(Last 7 days)] までの時間増分を選択します。デフォルトは [随時(Any Time)] です。 |
||
[承認済み状態(Acknowledged State)] |
承認済み状態または未承認状態のアラームを検索するには、このチェックボックスを選択します。このチェックボックスを選択しない場合、承認済み状態は検索基準の考慮に入れられません。 |
||
[割り当て済み状態(Assigned State)] |
割り当て済み状態または未割り当て状態のアラームを検索するか、所有者名によってアラームを検索するには、このチェックボックスを選択します。このチェックボックスを選択しない場合は、割り当て済み状態は検索基準に含まれません。
|
ジョブの検索
ジョブの高度な検索を実行する際に、次のパラメータを設定できます(表 58-5 を参照)。
フィールド |
オプション |
---|---|
ジョブ名(Job Name) |
検索するジョブの名前を入力します。 |
ジョブ タイプ(Job Type) |
検索するジョブのタイプを入力します。 |
ジョブのステータス(Job Status) |
[すべてのステータス(All Status)]、[電源(Power)]、または [スケジュール済み(Scheduled)] を選択します。 |
(注) |
[ジョブ名(Job Name)] と [ジョブタイプ(Job Type)] テキスト ボックスでは、ワイルドカード(*、? など)を使用して検索を絞り込んだり、検索範囲を広げたりすることができます。 |
アクセス ポイントの検索
アクセス ポイントの高度な検索を実行する際に、次のパラメータを設定できます(次の表を参照)。
フィールド |
オプション |
||
---|---|---|---|
検索方法(Search By) |
[すべてのAP(All APs)]、[基礎無線MAC(Base Radio MAC)]、[イーサネットMAC(Ethernet MAC)]、[AP名(AP Name)]、[APモデル(AP Model)]、[APロケーション(AP Location)]、[IPアドレス(IP Address)]、[デバイス名(Device Name)]、[コントローラIP(Controller IP)]、[すべての関連付けられていないAP(All Unassociated APs)]、[床面積(Floor Area)]、[屋外区域(Outdoor Area)]、[未割り当てAP(Unassigned APs)]、または [アラーム(Alarms)] を選択します。
|
||
AP タイプ(AP Type) |
[すべてのタイプ(All Types)]、[LWAPP]、または [自律(Autonomous)] を選択します。 |
||
AP Mode |
[すべてのモード(All Modes)]、[ローカル(Local)]、[モニタ(Monitor)]、[FlexConnect]、[不正検出(Rogue Detector)]、[スニファ(Sniffer)]、[ブリッジ(Bridge)]、または [SE接続(SE-Connect)] を選択します。 |
||
Radio Type |
[すべての無線(All Radios)]、[802.11a]、または [802.11b/g] を選択します。 |
||
802.11n サポート(802.11n Support) |
802.11n がサポートされるアクセス ポイントを検索するには、このチェックボックスを選択します。 |
||
OfficeExtend AP が有効(OfficeExtend AP Enabled) |
Office Extend アクセス ポイントを検索するには、このチェックボックスを選択します。 |
||
CleanAir サポート(CleanAir Support) |
CleanAir をサポートするアクセス ポイントを検索するには、このチェックボックスを選択します。 |
||
CleanAir が有効(CleanAir Enabled) |
CleanAir がサポートされ、有効になっているアクセス ポイントを検索するには、このチェックボックスを選択します。 |
||
ページあたりの項目数(Items per page) |
検索結果ページに表示するレコードの数を設定します。 |
コントローラ ライセンスの検索
コントローラ ライセンスの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
---|---|
コントローラ名(Controller Name) |
ライセンス検索に関連付けられたコントローラ名を入力します。 |
機能名(Feature Name) |
ライセンス階層に応じて、[すべて(All)]、[プラス(Plus)]、[基本(Base)] から選択します。 |
タイプ(Type) |
[すべて(All)]、[評価(Evaluation)]、[拡張(Extension)]、[猶予期間(Grace Period)]、または [無期限(Permanent)] を選択します。 |
% Used or Greater |
このドロップダウン リストからライセンスの使用パーセンテージを選択します。0 ~ 100 の範囲のパーセント値を使用します。 |
ページあたりの項目数(Items per page) |
検索結果ページに表示するレコードの数を設定します。 |
コントローラの検索
コントローラの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
||
---|---|---|---|
Search for controller by |
[すべてのコントローラ(All Controllers)]、[IPアドレス(IP Address)]、および [コントローラ名(Controller Name)] を選択します。
|
||
コントローラ IP アドレスの入力(Enter Controller IP Address) |
このテキスト ボックスは、[コントローラの検索条件(Search for controller by)] ドロップダウン リストから [IP アドレス(IP Address)] を選択した場合のみ表示されます。 |
||
コントローラ名の入力(Enter Controller Name) |
このテキスト ボックスは、[コントローラの検索条件(Search for controller by)] ドロップダウン リストから [コントローラ名(Controller Name)] を選択した場合のみ表示されます。 |
||
監査ステータス(Audit Status) |
ドロップダウン リストから、次のいずれかを選択します。
|
||
ページあたりの項目数(Items per page) |
検索結果ページに表示するレコードの数を設定します。 |
スイッチの検索
スイッチの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
---|---|
スイッチの検索条件(Search for Switches by) |
[すべてのスイッチ(All Switches)]、[IP アドレス(IP Address)]、または [スイッチ名(Switch Name)] を選択します。ワイルドカード(*)を使用できます。たとえば、[IPアドレス(IP Address)] を選択して 172* と入力すると、Cisco Prime Infrastructure は IP アドレスが 172 で始まるすべてのスイッチを返します。 |
Items per page |
検索結果ページに表示するレコードの数を設定します。 |
クライアントの検索
クライアントの高度な検索を実行する際に、次のパラメータを設定できます(表 58-10 を参照)。
フィールド |
オプション |
||
---|---|---|---|
[メディア タイプ(Media Type)] |
[すべて(All)]、[ワイヤレスクライアント(Wireless Clients)]、または [有線クライアント(Wired Clients)] を選択します。 |
||
[ワイヤレスタイプ(Wireless Type)] |
[メディアタイプ(Media Type)] リストから [ワイヤレスクライアント(Wireless Clients)] を選択した場合は、[すべて(All)]、[Lightweight]、または [自律型クライアント(Autonomous Clients)] を選択します。 |
||
検索方法(Search By) |
[すべてのクライアント(All Clients)]、[除外されたすべてのクライアント(All Excluded Clients)]、[すべての有線クライアント(All Wired Clients)]、[すべてのログインゲスト(All Logged in Guests)]、[IPアドレス(IP Address)]、[ユーザ名(User Name)]、[MACアドレス(MAC Address)]、[アセット名(Asset Name)]、[アセットカテゴリ(Asset Category)]、[アセットグループ(Asset Group)]、[AP名(AP Name)]、[コントローラ名(Controller Name)]、[コントローラIP(Controller IP)]、[MSE IP]、[床面積(Floor Area)]、[屋外区域(Outdoor Area)]、[スイッチ名(Switch Name)]、または [スイッチタイプ(Switch Type)] を選択します。
|
||
[クライアントの検出元(Clients Detected By)] |
[Prime Infrastructure] または [MSEs] を選択します。 [Cisco Prime Infrastructureにより検出されたクライアント(Clients detected by Cisco Prime Infrastructure)]:Cisco Prime Infrastructure データベースに保存されたクライアント。 [Clients detected by MSE]:コントローラと直接通信する MSE で Context Aware Service によって検索されるクライアント。 |
||
[クライアント状態(Client States)] |
[すべての状態(All States)]、[アイドル(Idle)]、[認証(Authenticated)]、[関連付けられました(Associated)]、[プローブ中(Probing)]、または [除外(Excluded)] を選択します。 |
||
[ポスチャ ステータス(Posture Status)] |
デバイスがクリーンであるかどうかを確認するには、[すべて(All)]、[不明(Unknown)]、[合格(Passed)]、[失敗(Failed)] を選択します。 |
||
[無線帯域による制限(Restrict By Radio Band)] |
特定の無線帯域を示すには、このチェックボックスを選択します。ドロップダウン リストから [5 GHz] または [2.4 GHz] を選択します。 |
||
[プロトコルによる制限(Restrict By Protocol)] |
特定のプロトコルを示すには、このチェックボックスを選択します。ドロップダウンリストから [802.11a]、[802.11b]、[802.11g]、[802.11n]、または [モバイル(Mobile)] を選択します。 |
||
SSID |
このチェックボックスを選択して、ドロップダウン リストから適切な SSID を選択します。 |
||
プロファイル(Profile) |
選択したプロファイルに関連するすべてのクライアントをリストするには、このチェックボックスを選択します。
|
||
[CCX 互換(CCX Compatible)] |
Cisco Client Extensions との互換性があるクライアントを検索するには、このチェックボックスを選択します。
|
||
[E2E 互換(E2E Compatible)] |
エンドツーエンドの互換性のあるクライアントを検索するには、このチェックボックスを選択します。
|
||
[NAC 状態(NAC State)] |
特定のネットワーク アドミッション コントロール(NAC)ステートによって識別されたクライアントを検索するには、このチェックボックスを選択します。
|
||
[関連付けなしを含む(Include Disassociated)] |
ネットワークに存在しないが、Cisco Prime Infrastructure に履歴レコードが保持されているクライアントを含めるには、このチェックボックスを選択します。 |
||
[ページあたりの項目数(Items per page)] |
検索結果ページに表示するレコードの数を設定します。 |
チョークポイントの検索
チョークポイントの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
||
---|---|---|---|
検索方法(Search By) |
[MAC アドレス(MAC address)] または [チョークポイント名(Chokepoint Name)] を選択します。
|
監査変更の詳細検索
監査変更の詳細な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
---|---|
[監査コンポーネント(Audit Component)] |
検索する監査コンポーネントの名前を入力します。 |
[監査の説明(Audit Description)] |
検索する監査説明の名前を入力します。 |
[IPアドレス(IP Address)] |
検索する IP アドレスの名前を入力します。 |
[ユーザ名(User Name)] |
検索するユーザ名を入力します。 |
イベントの検索
イベントの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
||
---|---|---|---|
Severity |
[すべての重大度(All Severities)]、[クリティカル(Critical)]、[メジャー(Major)]、[マイナー(Minor)]、[警告(Warning)]、[クリア(Clear)]、または 色分け |
||
[イベントカテゴリ(Event Category)] |
[すべてのタイプ(All Types)]、[アクセスポイント(Access Points)]、[コントローラ(Controller)]、[セキュリティ(Security)]、[カバレッジホール(Coverage Hole)]、[不正AP(Rogue AP)]、[アドホック不正(Adhoc Rogue)]、[干渉(Interference)]、[メッシュリンク(Mesh Links)]、[クライアント(Client)]、[モビリティサービス(Mobility Service)]、[モビリティサービス(Mobility Service)]、[ロケーション通知(Location Notifications)]、[再カバレッジホール(re Coverage Hole)]、または [Prime Infrastructure] を選択します。 |
||
条件 |
ドロップダウン リストを使用し、条件を選択します。また、このドロップダウン リストに入力して、条件を入力することもできます。
|
||
[すべてのイベントを検索(Search All Events)] |
検索結果ページに表示するレコードの数を設定します。 |
干渉源の検索
アクセス ポイントで検出された干渉源の高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
||
---|---|---|---|
検索方法(Search By) |
[すべての干渉源(All Interferers)]、[干渉源ID(Interferer ID)]、[干渉源カテゴリ(Interferer Category)]、[干渉源タイプ(Interferer Type)]、[影響を受けるチャネル(Affected Channel)]、[影響を受けるAP(Affected AP)]、[重要度(Severity)]、[電源(Power)]、または [デューティサイクル(Duty Cycle)] を選択します。
|
||
検出条件(Detected By) |
[すべての Spectrum Expert(All Spectrum Experts)] を選択するか、ドロップダウン リストから特定の Spectrum Expert を選択します。 |
||
過去(時間内)に検出されたもの(Detected within the last) |
干渉検出の時間範囲を選択します。時間範囲は、5 分~ 24 時間または [すべての履歴(All History)] です。 |
||
Interferer Status |
ドロップダウンリストから、[すべて(All)]、[アクティブ(Active)]、または [非アクティブ(Inactive)] を選択します。 |
||
Restrict by Radio Bands/Channels |
無線帯域またはチャネルによる検索を設定します。 |
||
ページあたりの項目数(Items per page) |
検索結果ページに表示するレコードの数を設定します。 |
Wi-Fi TDOA レシーバの検索
Wi-Fi TDOA 受信機の高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
||
---|---|---|---|
検索方法(Search By) |
[MAC アドレス(MAC Address)] または [Wi-Fi TDOA 受信機名(Wi-Fi TDOA Receivers Name)] を選択します。
|
マップの検索
マップの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
---|---|
検索対象(Search For) |
[すべてのマップ(All Maps)]、[キャンパス(Campuses)]、[ビルディング(Buildings)]、[床面積(FloorAreas)]、または [屋外区域(OutdoorAreas)] を選択します。 |
マップ名(Map Name) |
マップ名で検索します。テキスト ボックスにマップ名を入力します。 |
ページあたりの項目数(Items per page) |
検索結果ページに表示するレコードの数を設定します。 |
不正クライアントの検索
不正クライアントの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
---|---|
Search for clients by |
[すべての不正クライアント(All Rogue Clients)]、[MACアドレス(MAC Address)]、[コントローラ(Controller)]、[MSE]、[床面積(Floor Area)]、または [屋外区域(Outdoor Area)] を選択します。 |
検索場所(Search In) |
[MSE(MSEs)] または [Prime Infrastructure コントローラ(Prime Infrastructure Controllers)] を選択します。 |
Status |
チェックボックスをオンにし、ドロップダウンリストから [アラート(Alert)]、[包含(Contained)]、または [脅威(Threat)] を選択して、検索条件にステータスを含めます。 |
回避クライアントの検索
(注) |
有線ネットワーク上の Cisco IPS センサーが不審なクライアントまたは脅威的なクライアントを検出した場合は、そのクライアントを回避するようにコントローラに警告します。 |
回避クライアントの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
||
---|---|---|---|
検索方法(Search By) |
[すべての回避クライアント(All Shunned Clients)]、[コントローラ(Controller)]、または [IP アドレス(IP Address)] を選択します。
|
タグの検索
タグの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
||
---|---|---|---|
Search for tags by |
[すべてのタグ(All Tags)]、[アセット名(Asset Name)]、[アセットカテゴリ(Asset Category)]、[アセットグループ(Asset Group)]、[MACアドレス(MAC Address)]、[コントローラ(Controller)]、
|
||
検索場所(Search In) |
[MSE(MSEs)] または [Prime Infrastructureコントローラ(Prime Infrastructure Controllers)] を選択します。 |
||
Last detected within |
時間増分を 5 分~ 24 時間の間で選択します。デフォルトは 15 分です。 |
||
タグベンダー(Tag Vendor) |
このチェックボックスを選択して、[Aeroscout]、[G2]、[PanGo]、または [WhereNet] を選択します。 |
||
Telemetry Tags only |
適宜にタグを検索するには、[テレメトリタグのみ(Telemetry Tags only)] チェックボックスを選択します。 |
||
Items per page |
検索結果ページに表示するレコードの数を設定します。 |
デバイス タイプの検索
デバイス タイプの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
---|---|
Select Device Type |
[すべてのスイッチとハブ(All Switches and Hubs)]、[ワイヤレスコントローラ(Wireless Controller)]、[ユニファイドAP(Unified AP)]、[自律AP(Autonomous AP)]、[管理対象外AP(Unmanaged AP)]、または [ルータ(Routers)] を選択します。 |
Enter Device IP |
[Select Device Type] フィールドで選択したデバイスの IP アドレスを入力します。 |
設定バージョンの検索
設定バージョンの高度な検索を実行する際に、次のパラメータを設定できます。
フィールド |
オプション |
---|---|
タグを入力(Enter Tag) |
タグ名を入力します。 |
保存した検索の使用
(注) |
Saved Search は、現在のパーティションのみに適用されます。 |
以前に保存した検索にアクセスして実行するには、次の手順に従います。
手順
ステップ 1 |
[アプリケーション検索(Application Search)] ボックスのアイコンをクリックし、[保存した検索(Saved Search)] をクリックします。 |
ステップ 2 |
[カテゴリの検索(Search Category)] ドロップダウン リストからカテゴリを選択し、[保存した検索のリスト(Saved Search List)] ドロップダウン リストから保存されている検索を選択します。 |
ステップ 3 |
必要に応じて、保存されている検索の現在のパラメータを変更し、[Go] をクリックします。 |