Index
C
Call Home
E メール通知 1-4
E メールの設定 4-17
MIB 4-35
Smart Call Home 機能 4-6
宛先プロファイル
アトリビュート 4-13
アラート グループの関連付け 4-15
作成 4-12
説明 4-3
定義済み 4-3
変更 4-13
アラート グループ 4-3
アラート グループの変更 4-16
イネーブル 4-20
イベント トリガー(表) 4-23
インベントリ通知の設定 4-17, 4-19
仮想化サポート 4-7
コンタクト情報の設定 4-10
制約事項 4-8
設定 4-9
設定確認 4-21
設定例 4-22
説明 4-2‐4-7
前提条件 4-8
注意事項 4-8
重複メッセージ スロットリングのディセーブル化 4-20
ディセーブル 4-20
テスト メッセージの送信 4-21
デフォルト設定 4-22
ハイ アベイラビリティ 4-7
メッセージ フォーマット
XML フォーマット、例 4-31
XML(表) 4-25
インベントリ イベント(表) 4-27
オプション 4-2
ショート テキスト(表) 4-24
対応型イベント(表) 4-26
フル テキスト フォーマット、例 4-28
フル テキスト(表) 4-25
予防型イベント(表) 4-26
メッセージ レベル 4-6
メッセージ レベルと syslog レベルのマッピング(表) 4-6
ライセンス要件 4-8
利点 4-2
CDP
MIB(表) 2-13
TLV フィールド 2-2
VLAN ID 2-3
インターフェイスでのイネーブル化 2-7
オプション パラメータ 2-8
仮想化 2-4
機能のイネーブル化 2-6
機能のディセーブル化 2-7
キャッシュの消去 2-11
制約事項 2-5
設定確認 2-11
説明 2-2
タイマーの設定例 2-12
注意事項 2-5
デフォルト設定 2-12
統計情報の消去 2-11
バージョン 2-12
ライセンス要件 2-5
E
EEM
SNMP サポート 7-5
アクション 10-5
アクション文の設定 10-11
イベント 10-4
イベント ログ 10-3
イベント文の設定 10-9
上書きポリシー 10-3
上書きポリシーのアクション(注) 10-5
上書きポリシー(注) 10-3
仮想化サポート 10-6
環境変数 10-5
環境変数の定義 10-15
システム ポリシー 10-3
システム ポリシーの上書き 10-13
スクリプト ポリシー 10-5
スクリプト ポリシーのアクティブ化 10-13
スクリプト ポリシーの定義 10-12
スクリプト ポリシーの登録 10-13
制約事項 10-7
設定確認 10-16
設定例 10-16
説明 10-2‐10-6
前提条件 10-6
注意事項 10-7
デフォルト設定 10-17
ハイ アベイラビリティ 10-6
パラメータ置換 10-5
ポリシー 10-2
ポリシーの定義 10-7
ライセンス要件 10-6
EEM によるシステム ポリシーの上書き(例) 10-16
Embedded Event Manager、EEM を参照
M
MIB
Call Home 4-35
CDP 2-13
NetFlow 13-19
NTP 2-13
RMON 8-8
SNMP 7-20
説明 7-2
ダウンロード元 7-20
N
NetFlow
collect パラメータの指定 13-10
match パラメータの指定 13-9
MIB 13-19
NetFlow の設定 13-7
VLAN へのモニタ マップの適用 13-16
イネーブル 13-8
インターフェイスへのサンプラ マップの適用 13-15
インターフェイスへのモニタ マップの適用 13-15
エクスポータ マップ 13-3
エクスポート フォーマット 13-4
エクスポート マップの作成 13-11
仮想化サポート 13-5
キー 13-2
サンプラ マップ 13-4
サンプラ マップの作成 13-14
サンプル モード 13-2
制約事項 13-6
設定確認 13-18
設定例 13-18
説明 13-2‐13-5
タイムアウトの設定 13-17
注意事項 13-6
ディセーブル 13-8
適応型フレクシブル NetFlow 13-4
デフォルト設定 13-19
ハイ アベイラビリティ 13-4
ブリッジ型 NetFlow の設定 13-16
フル モード 13-2
フロー 13-2
モニタ マップ 13-4
モニタ マップの作成 13-13
ライセンス要件 13-5
レコード マップ 13-3
レコード マップの作成 13-8
NTP
MIB(表) 2-13
仮想化 2-4
機能の履歴(表) 2-13
サーバの設定 2-9
サーバの設定例 2-12
制約事項 2-5
セッションの削除 2-11
設定確認 2-11
説明 2-3
前提条件 2-5
層 2-3
注意事項 2-5
デフォルト設定 2-12
統計情報の消去 2-11
ハイ アベイラビリティ 2-4
ピア 2-4
ピアの設定 2-9
プロトコルのディセーブル化 2-9
ライセンス要件 2-5
O
OBFL
イネーブル 11-3
仮想化サポート 11-2
制約事項 11-3
設定確認 11-4
設定例 11-5
説明 11-2
前提条件 11-3
注意事項 11-3
ディセーブル 11-3
デフォルト設定 11-5
統計情報の消去 11-5
ライセンス要件 11-2
Onboard Failure Logging、OBFL を参照
R
RMON
MIB 8-8
RFC A-1
VRF 8-3
アラーム 8-2
アラームの設定 8-4
イベント 8-3
イベントの設定 8-5
仮想化サポート 8-3
制約事項 8-4
設定確認 8-6
設定例 8-7
説明 8-2
前提条件 8-3
注意事項 8-4
デフォルト設定 8-7
ハイ アベイラビリティ 8-3
ライセンス要件 8-3
S
Smart Call Home
SMARTnet 登録 4-7
説明 4-6
登録要件 4-7
SNMP
CLI とユーザの同期 7-5
EEM サポート 7-5
engineID の形式 7-9
MIB 7-2
RFC 7-2
RMON 8-2
VRF 7-7
暗号化の強制 7-9
エージェント 7-2
仮想化サポート 7-7
機能の履歴(表) 7-20
コミュニティの作成 7-10
コンタクトの指定 7-15
コンテキスト 7-6
コンテキストとネットワーク エンティティ間のマッピング設定 7-16
コンテキストのマッピング 7-6
サポート対象の MIB 7-20
制約事項 7-7
設定確認 7-19
設定例 7-19
説明 7-2‐7-7
前提条件 7-7
注意事項 7-7
通知
linkUp/linkDown 通知の設定 7-15
VRF を使用する通知レシーバーの設定 7-12
応答要求 7-2
個々の通知のイネーブル化 7-13
説明 7-2
通知ターゲット ユーザの設定 7-11
通知レシーバーの設定 7-11
トラップ 7-2
デフォルト設定 7-19
認証 7-4
バージョン
SNMPv3 7-3
USM 7-4
セキュリティ モデルおよびセキュリティ レベル 7-3
ハイ アベイラビリティ 7-6
複数のユーザ ロールの割り当て 7-10
プロトコルのディセーブル化 7-18
グループベース アクセスグループ 7-5
マネージャ 7-2
マルチインスタンス サポート 7-6
ユーザの設定 7-8
ライセンス要件 7-7
ロケーションの指定 7-15
ワンタイム認証のイネーブル化 7-15
SPAN
RSPAN VLAN の設定 12-12
RSPAN(注) 12-2
仮想 SPAN セッション 12-3
仮想 SPAN セッションの設定 12-9
仮想 SPAN セッションの設定(例) 12-16
仮想化サポート 12-4
制約事項 12-5
セッション 12-2
セッション宛先 12-6
セッション送信元 12-6
セッションの PVLAN 送信元の設定(例) 12-17
セッションのイネーブル化 12-13
セッションのシャットダウン 12-13
セッションの設定 12-6
セッションの設定(例) 12-15
設定確認 12-14
説明 12-2‐12-4
前提条件 12-5
注意事項 12-5
ハイ アベイラビリティ 12-4
マルチセッション 12-4
ライセンス要件 12-4
syslog
システム メッセージを参照
お
オンデマンド診断 9-5
オンライン診断機能
VRF 9-6
オンデマンド 9-5
オンデマンド テストの開始 9-9
オンデマンド テストの中止 9-9
仮想化サポート 9-6
起動時 9-3
起動診断レベルの設定 9-7
診断テストのアクティブ化 9-8
診断テストの非アクティブ設定 9-9
制約事項 9-6
設定確認 9-11
設定例 9-12
説明 9-2‐9-6
前提条件 9-6
注意事項 9-6
テスト結果のシミュレーション 9-11
テスト結果の消去 9-10
デフォルト設定 9-12
ハイ アベイラビリティ 9-5
ヘルス モニタリング 9-4
ライセンス要件 9-6
ランタイム 9-4
か
簡易ネットワーク管理プロトコル、SNMP を参照
関連資料 xviii
き
起動診断 9-3
機能、新規および変更(表) xiii
こ
コマンド スケジューラ
仮想化サポート 6-3
機能のイネーブル化 6-5
機能のディセーブル化 6-6
実行ログ 6-2, 6-3
実行ログの設定 6-11
ジョブ 6-2
ジョブの削除 6-8
スケジュールの指定 6-9
制約事項 6-4
設定 6-5
設定確認 6-11
説明 6-2
前提条件 6-3
注意事項 6-4
デフォルト設定 6-12
認証 6-2
認証の設定 6-6
ジョブの定義ジョブ 6-7
ハイ アベイラビリティ 6-3
ライセンス要件 6-3
し
シスコ検出プロトコル
CDP を参照
システム メッセージ
Linux システムでの syslog サーバ設定 3-10
RFC 3-2
syslog サーバ 3-3
syslog サーバの設定 3-9
UNIX システムでの syslog サーバ設定 3-10
仮想化サポート 3-3
記録する重大度の設定 3-7
コンソール ポートへのロギング 3-4
重大度(表) 3-2
設定確認 3-12
設定(例) 3-12
説明 3-2
タイムスタンプの設定 3-7
端末セッションへのロギング 3-4
注意事項 3-3
デフォルト設定 3-13
ファイルへのロギング 3-6
メッセージ リスト 3-13
ライセンス要件 3-3
ログ ファイルの消去 3-11
ログ ファイルの表示 3-11
資料
追加資料 xviii
表記法 xvii
診断
オンデマンド 9-5
起動時 9-3
ランタイム 9-4
す
スイッチド ポート アナライザ、SPAN を参照
スケジューラ、コマンド スケジューラを参照
せ
セッション マネージャ 5-9
ACL セッションの設定(例) 5-10
ACL の設定 5-8
仮想化サポート 5-3
制約事項 5-4
セッションの確認 5-8
セッションのコミット 5-9
セッションの作成 5-7
セッションの廃棄 5-9
セッションの保存 5-9
設定確認 5-10
説明 5-2
前提条件 5-3
注意事項 5-4
ハイ アベイラビリティ 5-3
ライセンス要件 5-3
セッションの実行 5-9
設定方式 1-2
て
デフォルト設定
Call Home 4-22
CDP 2-12
EEM 10-17
NetFlow 13-19
NTP 2-12
OBFL 11-5
RMON 8-7
SNMP 7-19
オンライン診断機能 9-12
コマンド スケジューラ 6-12
システム メッセージ 3-13
ロールバック 5-11
と
トラップ、SNMP を参照
トラブルシューティング 1-5
ね
ネットワーク タイム プロトコル、NTP を参照
は
ハイ アベイラビリティ
CDP 2-4
EEM 10-6
NetFlow 13-4
NTP 2-4
RMON 8-3
SNMP 7-6
SPAN 12-4
オンライン診断機能 9-5
ら
ライセンス要件
Call Home 4-8
CDP 2-5
EEM 10-6
NetFlow 13-5
NTP 2-5
OBFL 11-2
RMON 8-3
SNMP 7-7
SPAN 12-4
オンライン診断機能 9-6
コマンド スケジューラ 6-3
システム メッセージ 3-3
セッション マネージャ 5-3
ロールバック 5-3
ランタイム診断 9-4
ろ
ロールバック
仮想化サポート 5-3
制約事項 5-4
設定確認 5-10
設定例 5-10
説明 5-2
前提条件 5-3
チェックポイント コピー 5-2
チェックポイント コピーの作成 5-5
チェックポイント ファイルの削除 5-5
チェックポイント ファイルへの復帰 5-6
注意事項 5-4
デフォルト設定 5-11
ハイ アベイラビリティ 5-3
ライセンス要件 5-3
ロールバックの実装 5-6