この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章の内容は、次のとおりです。
このマニュアルでは Cisco Nexus 1000V InterCloud のインストール方法について説明しています。 Cisco Nexus 1000V InterCloud ソフトウェアは、ソフトウェアが提供するダウンロード URL ロケーションで使用できます。 Cisco Nexus 1000V InterCloud ソフトウェア パッケージには、次の内容が含まれます。
ソフトウェア | イメージ名 |
---|---|
Cisco Nexus 1000V InterCloud VSM |
n1000v-dk9.5.2.1.SK1.1.1.ova |
InterCloud Extender イメージ |
n1000v-dk9.5.2.1.IC1.1.1.ova |
InterCloud スイッチ イメージ |
n1000v-dk9.5.2.1.IC1.1.1.img |
InterCloud Agent イメージ |
ica-5.2.1.IC1.1.1.<OS>.<version>.<arch>.rpm 次の OS バージョンおよびアーキテクチャ用のイメージが含まれています。 ica-version.win2k8r2.x86_64.zip icaami-version.win2k8r2.x86_64.zip |
(注) |
インストール プロセスを開始する前にファイルを展開する必要があります。 |
Cisco Prime Network Services Controller イメージ(nsc.3.0.1x.ova)も Cisco Nexus 1000V InterCloud のインストールに必要です。 Cisco Prime Network Services Controller イメージは、次の場所からダウンロードできます。
(注) |
開く必要のあるリージョンの AWS の IP アドレス。 https://forums.aws.amazon.com/ann.jspa?annID=1701を参照してください。 |
詳細については、『Cisco Prime Network Services Controller Quick Start Guide』を参照してください。
(注) |
管理ポート プロファイルは、エンタープライズの Cisco Nexus 1000V VSM で使用されているものと同じポート プロファイルである場合があります。 ポート プロファイルは VSM で設定され、Cisco Prime Network Services Controller 管理インターフェイスで使用されます。 |
詳細については、『Cisco Prime Network Services Controller Quick Start Guide』を参照してください。
Cisco Nexus 1000V InterCloud をインストールするために、次のソフトウェアが必要です。
Cisco Nexus 1000V InterCloud のインストールは次の手順で構成されています。 1 つの手順を終了するたびに、この項に戻って、必要なすべての手順を正しい順序で実施しているか確認してください。
ステップ 1 |
OVA を使用した Cisco Prime Network Services Controller のインストール。 OVA を使用した Cisco Prime Network Services Controller のインストールを参照してください。 Cisco Prime Network Services Controller のインストールについての詳細は、『Cisco Prime Network Services Controller Quick Start Guide』を参照してください。 |
ステップ 2 |
Cisco Prime Network Services Controller による VM Manger(vCenter)の登録。 Cisco Prime Network Services Controllerへの VM Manager の登録を参照してください。 |
ステップ 3 | InterCloud への Cisco Nexus 1000V VSM のインストール。 |
ステップ 4 |
InterCloud の Cisco Nexus 1000V VSM でのポート プロファイルの設定。 ポート プロファイルの設定を参照してください。 ポート プロファイルについては、『Cisco Nexus 1000V Port Profile Configuration Guide』 を参照してください。 |
ステップ 5 |
Cisco Prime Network Services Controller への Cisco Nexus 1000V InterCloud スイッチの登録。 Cisco Prime Network Services Controllerの InterCloud 用 Cisco Nexus 1000V VSM の登録を参照してください。 |
エンタープライズの Cisco Nexus 1000V InterCloud VSM と Cisco Nexus 1000V VSM にポート プロファイルを設定するには、次の手順を使用します。
InterCloud の Cisco Nexus 1000V InterCloud VSM で、次のポート プロファイルを設定する必要があります。
(注) |
個別のトンネル インターフェイスの Cisco Prime Network Services Controller で [Advanced Option] を選択する場合は、このポート プロファイルを設定する必要があります。 [Advanced Options] を選ばない場合、管理インターフェイスはトンネル インターフェイスに使用されます。 |
(注) |
InterCloud Extender および InterCloud スイッチに対して内部トンネル トランク インターフェイスのトランク ポート プロファイルで指定された VLAN が、InterCoud Extender エンタープライズのトランク インターフェイスのトランク ポート プロファイルに含まれている必要があります。 |
ステップ 1 |
エンタープライズのCisco Nexus 1000V VSM のポート プロファイルの設定。 ポート プロファイルの設定については、『Cisco Nexus 1000V Port Profile Configuration Guide』 を参照してください。 |
ステップ 2 |
InterCloud Extender および InterCloud スイッチの内部トンネル トランク インターフェイスのトランク ポート プロファイルの設定。 InterCloud Extender および InterCloud スイッチのトランク ポート プロファイルの設定を参照してください。 |
ステップ 3 | InterCloud スイッチ管理インターフェイスのアクセス ポート プロファイルの設定。 |
ステップ 4 |
InterCloud の VM データ トラフィックのアクセス ポート プロファイルの設定。 仮想マシン データ トラフィックのアクセス ポート プロファイルの設定を参照してください。 |
InterCloud Extender および InterCloud スイッチの内部トンネルのトランク インターフェイスのトランク ポート プロファイルを設定するには、次の手順を使用します。
次に、InterCloud Extender のデフォルトのトランク ポート プロファイルを設定する例を示します。
switch# configure terminal switch(config)# port-profile port-profile type vethernet N1K_Cloud_Default_Trunk switch(config-port-prof)# switchport mode trunk switch(config-port-prof)# switchport trunk allowed vlan 72,2315-2350 switch(config-port-prof)# no shutdown switch(config-port-prof)# state enabled switch(config-port-prof)# max ports 64 switch(config-port-prof)# description port profile created for N1000V internal usage switch(config-port-prof)# system vlan 72 switch(config-port-prof)# publish port-profile switch(config-port-prof)#
次に、InterCloud Extender のトランク ポート プロファイルを設定する例を示します。
switch# configure terminal switch(config)# port-profile port-profile type vethernet Trunk_To_Cloud switch(config-port-prof)# switchport mode trunk switch(config-port-prof)# switchport trunk allowed vlan 72,2315-2350 switch(config-port-prof)# no shutdown switch(config-port-prof)# state enabled switch(config-port-prof)# max ports 64 switch(config-port-prof)# system vlan 72 switch(config-port-prof)# publish port-profile switch(config-port-prof)#
InterCloud スイッチ管理インターフェイスのアクセス ポート プロファイルを設定するには、次の手順を使用します。
ステップ 1 |
switch# configure terminal グローバル コンフィギュレーション モードを開始します。 |
||
ステップ 2 |
switch(config)# [no] vlan vlan-id VLAN または VLAN の範囲を作成、または削除し、実行コンフィギュレーションに保存します。 |
||
ステップ 3 |
switch(config)# port-profile type vethernet name 名前付きポート プロファイルのポート プロファイル コンフィギュレーション モードを開始します。 ポート プロファイルがない場合は、次の特性を使用して作成されます。 |
||
ステップ 4 |
switch(config-port-prof)# switchport mode access ポート モード アクセスを設定します。 |
||
ステップ 5 |
switch(config-port-prof)# switchport access vlan [vlan-id-access] このポート プロファイルにアクセス VLAN ID を割り当てます。
|
||
ステップ 6 |
switch(config-port-prof)# no shutdown 管理上の目的でプロファイル内のすべてのポートをイネーブルにします。 |
||
ステップ 7 |
switch(config-port-prof)# state enabled ポート プロファイルをイネーブルにし、割り当てられたポートに設定を適用します。 |
||
ステップ 8 |
switch(config-port-prof)# system vlan vlan-id このポート プロファイルにシステム VLAN を追加します。 ステップ 5 で設定したとおりに、VLAN を指定します。 |
||
ステップ 9 |
switch(config-port-prof)# publish port-profile <name> Cisco Prime Network Services Controller にポート プロファイルを発行します。 |
||
ステップ 10 |
(任意)switch(config-port-prof)# copy running-config startup-config リブートおよびリスタート時に実行コンフィギュレーションをスタートアップ コンフィギュレーションにコピーして、変更を永続的に保存します。 |
次に、InterCloud スイッチ管理インターフェイスにポート プロファイルを設定する例を示します。
switch# configure terminal switch(config)# port-profile type vethernet mgmt-access switch(config-port-prof)# switchport mode access switch(config-port-prof)# switchport access vlan 72 switch(config-port-prof)# no shutdown switch(config-port-prof)# state enabled switch(config-port-prof)# system vlan 72 switch(config-port-prof)# publish port-profile mgmt-access switch(config-port-prof)#
クラウドでの VM のデータ トラフィックにアクセス ポート プロファイルを設定するには、次の手順を使用します。
ステップ 1 |
switch# configure terminal グローバル コンフィギュレーション モードを開始します。 |
||
ステップ 2 |
switch(config)# [no] vlan vlan-id VLAN または VLAN の範囲を作成、または削除し、実行コンフィギュレーションに保存します。 |
||
ステップ 3 |
switch(config)# port-profile type vethernet name 名前付きポート プロファイルのポート プロファイル コンフィギュレーション モードを開始します。 ポート プロファイルがない場合は、次の特性を使用して作成されます。 |
||
ステップ 4 |
switch(config-port-prof)# switchport mode access ポート モード アクセスを設定します。 |
||
ステップ 5 |
switch(config-port-prof)# switchport access vlan [vlan-id-access] このポート プロファイルにアクセス VLAN ID を割り当てます。
|
||
ステップ 6 |
switch(config-port-prof)# no shutdown 管理上の目的でプロファイル内のすべてのポートをイネーブルにします。 |
||
ステップ 7 |
switch(config-port-prof)# state enabled ポート プロファイルをイネーブルにし、割り当てられたポートに設定を適用します。 |
||
ステップ 8 |
switch(config-port-prof)# publish port-profile <name> Cisco Prime Network Services Controller にポート プロファイルを発行します。 |
||
ステップ 9 |
(任意)switch(config-port-prof)# copy running-config startup-config リブートおよびリスタート時に実行コンフィギュレーションをスタートアップ コンフィギュレーションにコピーして、変更を永続的に保存します。 |
次に、InterCloud の Cisco Nexus 1000V InterCloud VSM で VM データ トラフィックにポート プロファイルを設定する例を示します。
switch# configure terminal switch(config)# port-profile type vethernet CSW_2318 switch(config-port-prof)# switchport mode access switch(config-port-prof)# switchport access vlan 2318 switch(config-port-prof)# no shutdown switch(config-port-prof)# state enabled switch(config-port-prof)# publish port-profile CSW_2318 switch(config-port-prof)#
OVA を使用した Cisco Prime Network Services Controller をインストールするには、この手順を使用します。
ステップ 1 |
Cisco Prime Network Services Controller の仮想マシンを展開するホストを選択します。 |
ステップ 2 |
[File] メニューから [Deploy OVF Template] を選択します。 [Deploy OVF Template] ウィンドウが開きます。 |
ステップ 3 |
ファイルまたは URL の [Deploy] フィールドに、Cisco Prime Network Services Controller OVA ファイルへのパスを入力し、[Next] をクリックします。 [OVF Template Details] ウィンドウが開きます。 |
ステップ 4 |
[Next] をクリックします。 [End User License Agreement] ウィンドウが開きます。 |
ステップ 5 |
[Accept] をクリックしてエンド ユーザ ライセンス契約に同意し、[Next] をクリックします。 [Name and Location] ウィンドウが開きます。 |
ステップ 6 |
[Name] フィールドに、Cisco Prime Network Services Controller の名前を入力します。 名前は最大 80 文字で構成でき、インベントリ フォルダ内で固有である必要があります。 |
ステップ 7 |
[Inventory Location] ペインでは、使用する場所を選択して、[Next] をクリックします。 [Deployment Configuration] ウィンドウが開きます。 |
ステップ 8 |
[Configuration] ドロップダウン リストから、[Installer] を選択し、[Next] をクリックします。 [Host/Cluster] ウィンドウが開きます。 |
ステップ 9 |
Cisco Prime Network Services Controller VM をインストールするホストを選択します。 [Storage] ウィンドウが開きます。 |
ステップ 10 |
[Datastore] ペインで VM のデータストアを選択し、[Next] をクリックします。 [Disk Format] ウィンドウが開きます。 |
ステップ 11 |
VM vdisks を保存する形式に [Thin provisioned format] または [Thick provisioned format] のいずれかのオプションボタンをクリックし、[Next] をクリックします。 [Network Mapping] ウィンドウが開きます。 |
ステップ 12 |
ネットワーク マッピングのペインで、VM の管理ネットワーク ポート プロファイルを選択し、[Next] をクリックします。 [Properties] ウィンドウが開きます。 |
ステップ 13 |
[Properties] ペインで、次の情報を入力します。
Cisco Prime Network Services Controller のリストア設定を無視します。 [Next] をクリックします。[Ready to Complete] ウィンドウが開きます。 |
ステップ 14 |
[Ready to Complete] ウィンドウで、導入設定情報を確認し、[Finish] をクリックします。 VM の導入が完了したら、VM の電源をオンにします。 |
Cisco Prime Network Services Controller に接続するブラウザを使用できます。
Cisco Prime Network Services Controller をインストールしました。
ステップ 1 |
ブラウザを開きます。 ブラウザの [Address] フィールドに、Cisco Prime Network Services Controller インスタンスに指定した IP アドレスを入力し、[Enter] をクリックします。 [Website Security Certification] ウィンドウが開きます。 Cisco Prime Network Services Controller のログイン ページに進むセキュリティ例外を追加します。 |
ステップ 2 | 適切なユーザ名とパスワードを使用して、Cisco Prime Network Services Controller にログインします。 |
ステップ 3 | [Virtual Network Management Center] で、 をクリックします。 |
ステップ 4 | [VM Manager] ウィンドウで、[Export vCenter Extension] をクリックします。 |
ステップ 5 |
[vSphere Client] ウィンドウで、 を選択します。 [Plug-in Manager] ウィンドウが開きます。 |
ステップ 6 |
[Available Plug-ins] ペインで、[New Plug-in] を右クリックして選択します。 [Register Plug-in] ウィンドウが開きます。 |
ステップ 7 | [Register Plug-in] ウィンドウで、[Browse] をクリックして、Cisco Prime Network Services Controller vCenter 拡張ファイルを選択します。 |
ステップ 8 | [Register Plug-in] をクリックします。 |
ステップ 9 |
セキュリティ警告メッセージで [Ignore] をクリックします。 登録が正常に完了すると、メッセージが表示されます。 |
ステップ 10 | [Plug-in] ウィンドウで [OK] をクリックして閉じます。 |
ステップ 11 | [Virtual Network Management Center] で、 をクリックします。 |
ステップ 12 |
[VM Managers] ペインで、[Add VM Manager] をクリックします。 [Add VM Manager] ウィンドウが表示されます。 |
ステップ 13 | [VM Managers] ペインで、次の情報を入力します。 |
ステップ 14 |
[OK] をクリックします。 登録に成功すると、VM マネージャのペインの場合は、VM Manager の [Operational State] に UP と表示されます。 |
InterCloud の Cisco Nexus 1000V VSM をインストールするには、次の手順を使用します。
次の情報を用意します。
ステップ 1 | [vSphere Client] で、 を選択します。 |
ステップ 2 | [Source] 画面で、OVA ファイル n1000v-dk9.5.2.1.SK1.1.0.0.ova の場所を指定して、[Next] をクリックします。 |
ステップ 3 | [OVF Template Details] 画面が開いて、ファイル サイズや VM ディスク サイズを含む製品情報が表示されます。 |
ステップ 4 | [Next] をクリックします。 |
ステップ 5 | Cisco Nexus 1000V のライセンス契約に目を通します。 |
ステップ 6 | [Accept] をクリックして、[Next] をクリックします。 |
ステップ 7 |
VSM 名を追加し、常駐するインベントリ内のフォルダの場所を選択して、[Next] をクリックします。 VSM の名前は、インベントリ フォルダ内で一意である必要があります。また、文字数が 80 文字未満である必要があります。 |
ステップ 8 |
[Configuration] ドロップダウン リストから、[Nexus 1000V Installer] を選択します。 この選択では、GUI セットアップ ダイアログを使用してプライマリ VSM を設定します。 |
ステップ 9 | [Next] をクリックします。 |
ステップ 10 | VSM のインストール先のデータセンターまたはクラスタを選択します。 |
ステップ 11 | [Next] をクリックします。 |
ステップ 12 |
使用できる場合、ファイルを保存するデータストアを選択します。 このページで、宛先クラスタまたはホストですでに設定されているデータストアから選択します。 仮想マシン コンフィギュレーション ファイルおよび仮想ディスク ファイルが、このデータストアに保存されます。 仮想マシンとそのすべての仮想ディスク ファイルを保存できる十分なサイズのデータストアを選択してください。 |
ステップ 13 | [Next] をクリックします。 |
ステップ 14 | 仮想マシンの仮想ディスクを保存するためのディスク形式として [Thick Provisioned] を選択して、[Next] をクリックします。 |
ステップ 15 | [Network Mapping] 画面では、インベントリにあるネットワークを選択します。 |
ステップ 16 | [Next] をクリックします。 |
ステップ 17 | プライマリ VSM に次のプロパティを指定します。 |
ステップ 18 | [Next] をクリックします。 |
ステップ 19 |
設定を確認し、[Finish] をクリックします。 VM インストールの進捗状況を示すステータス バーが表示されます。 |
ステップ 20 |
[Close] をクリックします。 Cisco Nexus 1000V ソフトウェアのインストールが完了しました。 |
ステップ 21 |
VSM を右クリックして、[Open Console] を選択します。 Cisco Nexus 1000V ソフトウェアのインストールが完了しました。 |
ステップ 22 | 緑色の矢印をクリックして VSM に電源を投入します。 |
ステップ 23 |
VSM プロンプトに次のコマンドを入力します。
switch# configure terminal switch(config)# setup |
ステップ 24 |
HA ロールを入力します。 ロールを指定しない場合は、スタンドアロン ロールがデフォルトで割り当てられます。 次に、プライマリとしての HA ロールの例を示します。 Enter HA role[standalone/primary/secondary]: primary [#########################################] 100% ---- Basic System Configuration Dialog ---- This setup utility will guide you through the basic configuration of the system. Setup configures only enough connectivity for management of the system. *Note: setup is mainly used for configuring the system initially, when no configuration is present. So setup always assumes system defaults and not the current system configuration values. Press Enter at anytime to skip a dialog. Use ctrl-c at anytime to skip the remaining dialogs. Would you like to enter the basic configuration dialog (yes/no): 次に、セカンダリとしての HA ロールの例を示します。 Enter HA role[standalone/primary/secondary]: secondary Setting HA role to secondary will cause a system reboot. Are you sure (yes/no) ? : |
ステップ 25 | 次のいずれかを実行します。プライマリおよびアクティブ VSM を設定する場合は、ステップ 17 に進みます。 |
ステップ 26 |
VSM 仮想マシン(VM)が CD-ROM からブートするように設定し、CD-ROM 収録の ISO イメージからセカンダリ VSM をインストールする場合は、CD から VSM がブートされないように仮想 CD-ROM を削除してください。 VSM VM がハード ドライブより先に CD-ROM から起動するように設定している場合は、このステップが必要です。 |
ステップ 27 |
セカンダリおよびスタンバイ VSM を設定しているときに、VSM の再起動が要求された場合は、yes と入力します。 セカンダリ VSM VM が再起動し、スタンバイ モードになります。 セカンダリ VSM のパスワードは、アクティブおよびプライマリ VSM のパスワードと同期化されます。 アクティブおよびプライマリ VSM の設定はここで自動的にスタンバイと同期化されます。 次に、HA ロールがセカンダリに設定されている場合のシステム リブートの例を示します。 Setting HA role to secondary will cause a system reboot. Are you sure (yes/no) ? :y [########################################] 100% HA mode set to secondary. Rebooting now... セカンダリ VSM を設定する手順が完了しました。 |
ステップ 28 |
基本設定ダイアログを入力するには、yes と入力します。 Would you like to enter the basic configuration dialog (yes/no): yes |
ステップ 29 |
別のログイン アカウントを作成するには、no と入力します。 Create another login account (yes/no) [n]: no |
ステップ 30 |
読み取り専用 SNMP コミュニティ ストリングを設定するには、no と入力します。 Configure read-only SNMP community string (yes/no) [n]: no |
ステップ 31 |
読み取りと書き込み SNMP コミュニティ ストリングを設定するには、no と入力します。 Configure read-write SNMP community string (yes/no) [n]: no |
ステップ 32 |
読み取りと書き込み SNMP コミュニティ ストリングを設定するには、no と入力します。 Configure read-write SNMP community string (yes/no) [n]: no |
ステップ 33 |
スイッチの名前を入力します。 Enter the switch name: n1000v |
ステップ 34 |
アウトオブバンド管理を設定するには、yes と入力します。続いて mgmt0 IPv4 アドレスとサブネット マスクを入力します。 Continue with Out-of-band (mgmt0) management configuration? [yes/no] [y]: yes Mgmt0 IPv4 address: 172.28.15.152 Mgmt0 IPv4 netmask: 255.255.255.0 |
ステップ 35 |
デフォルト ゲートウェイを設定するには、yes と入力します。 Configure the default-gateway: (yes/no) [y]: yes IPv4 address of the default gateway : 172.23.233.1 |
ステップ 36 |
拡張 IP オプションを設定するには、no と入力します。 Configure Advanced IP options (yes/no)? [n]: no |
ステップ 37 |
Telnet サービスをイネーブルにするには、yes と入力します。 Enable the telnet service? (yes/no) [y]: yes |
ステップ 38 |
SSH サービスをイネーブルにするには、yes と入力します。続いてキー タイプとキー ビット数を入力します。 Enable the ssh service? (yes/no) [y]: yes Type of ssh key you would like to generate (dsa/rsa) : rsa Number of key bits <768-2048> : 1024 |
ステップ 39 |
HTTP サーバをイネーブルにするには、yes と入力します。 Enable the http-server? (yes/no) [y]: yes |
ステップ 40 |
NTP サーバを設定するには、no と入力します。 Configure NTP server? (yes/no) [n]: yes |
ステップ 41 |
SVS ドメイン パラメータを設定するには、yes と入力します。続いてモード(L2 または L3)と、コントロールおよびパケット VLAN ID を入力します。 Configure svs domain parameters? (yes/no) [y]: yes Enter SVS Control mode (L2 / L3) : L3 |
ステップ 42 |
VEM 機能レベルを設定するには、yes と入力します。続いて 0 または 1 を入力します。 feature level will be set to 4.2(1)SV2(1.1), Do you want to reconfigure? (yes/no) [n] Current vem feature level is set to 4.2(1)SV2(1.1) You can change the feature level to: vem feature level is set to the highest value possible ここでシステムに、全設定の概要を示し、これを編集するかどうかの確認を求められます。 The following configuration will be applied: Switchname n1000v interface Mgmt0 ip address 172.28.15.152 255.255.255.0 no shutdown no telnet server enable ssh key rsa 1024 force ssh server enable feature http-server svs-domain svs mode L3 control vlan 1 packet vlan 1 domain id 101 |
ステップ 43 |
次のどちらかを実行します。
Would you like to edit the configuration? (yes/no) [n]:no |
ステップ 44 |
この設定を使用および保存するには、yes と入力します。 ここで設定を保存しておかないと、次回のスイッチのリブート時に設定が更新されません。 新しい設定を保存し、キックスタートおよびシステム イメージが自動的に設定されたことを確認するには、yes と入力します。 Use this configuration and save it? (yes/no) [y]: yes [########################################] 100% |
プロバイダーのクラウドにCisco Nexus 1000V をインストールした後、Cisco Prime Network Services Controller に Cisco Nexus 1000V VSM を登録する必要があります。
ステップ 1 |
InterCloud CLI の Cisco Nexus 1000V VSM 上で、次のコマンドを入力します。 switch# configure terminal switch(config)# nsc-policy-agent switch(config-nsc-policy-agent)# registration-ip 10.106.192.192 switch(config-nsc-policy-agent)# shared-secret Example_Secret123 switch(config-nsc-policy-agent)# policy-agent-image bootflash:/vsmcpa.<filename>.bin switch(config)# copy running-config startup-config switch(config)# exit |
ステップ 2 |
show nsc-pa status コマンドを入力して、登録が成功したかどうかを確認します。 この例は、Cisco Prime Network Services Controller が到達可能であることを示しています。 switch# show nsc-pa status NSC Policy-Agent status is - Installed Successfully. Version 3.0(0.33)-vsmc InterCloud の Cisco Nexus 1000V VSM は Cisco Prime Network Services Controller に登録されました。 |