診断ツールの機能
診断ツールを使用すれば、次のことが可能です。
-
ハードウェアの問題を見つけるために、さまざまなサーバ コンポーネントに対してテストを実行し、テスト結果を表形式で分析する。
-
使用可能なテストを閲覧することなく、クイック タスク機能を使用してすべてのテストを実行する。
-
いくつかのテストを並行して実行すると、他のテストに干渉する可能性があるため、逐次テストを実行する。
-
デフォルトとは異なる別の引数値を入力して、テストを設定する。
-
テスト スイート機能を使用して、実行するテストを選択する。
-
外部 USB フラッシュ ドライブに、SEL ログなどのすべてのテスト ログを保存する。
-
サーバの現在の状態を調べ、ハードウェアの問題を表示する。
次の表で、特定の診断機能を使用すべき場合について説明します。
診断コンポーネント |
機能 |
F7 オプション |
サーバのブート中に特定のテストのセットを実行するには、このオプションを使用します。 テストされるコンポーネントは、メモリ、プロセッサ、キャッシュ、スマート ディスク、QPI、メモリ パターン、RAID アダプタです。 |
クイック テスト |
所定の期間内のサブシステムのステータスをすばやく確認する場合は、このテストを使用します。クイック テストでテストできるコンポーネントは、プロセッサ、キャッシュ、メモリ、ディスク、ビデオ、ネットワーク、QPI、CMC、RAID およびチップセットです。 |
包括的テスト |
サブシステムを詳細にテストする場合は、このテストを使用します。これらのテストは、サブシステムに負荷を加え、エラーを報告するように設計されています。実行できるテストは、プロセッサ、メモリ、QPI、ディスク、および NUMA です。 |
クイック タスク |
包括的テストとクイック テストの両方が統合されたテストを実行できます。クイック タスクを使用して、両方の種類のテストを実行できます。 |
テスト スイート |
クイック テストと包括的テストで使用可能なすべてのテストは、ここで使用できます。テスト スイートでは、必要な数のテストを選択し(チェックボックスを使用)、これらを同時に実行できます。 |
テスト ログの概要 |
実行したすべてのテストのログ、エラー ログ、分析を表示するには、テスト ログの概要を使用します。ログをソートするため、4 つのフィルタを使用できます。 |
テストの要約 |
左側のナビゲーションのこのテーブルは、実行したテストの結果を、合格したテスト、キューに格納されているテスト、不合格だったテストの形式で表示します。 |