この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
この章は、次の項で構成されています。
Cisco UCS Director リリース 5.5 でサポートされるアップグレード パスは、以下のとおりです。
リリース 5.4 からリリース 5.5 へ
リリース 5.4(0.1) からリリース 5.5 へ
リリース 5.4(0.2) からリリース 5.5 へ
リリース 5.4(0.3) からリリース 5.5 へ
リリース 5.4 以前のバージョンからリリース 5.5 への Cisco UCS Director のアップグレードはサポートされていません。
Cisco UCS Director リリース 5.4 からアップグレードするには、次の手順に従ってください。それ以前のリリースからアップグレードする必要がある場合は、まずリリース 5.4 にグレードする必要があります。詳細については、http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-director/products-installation-guides-list.html にある『Cisco UCS Director Administration Guide, Release 5.4』を参照してください。
Cisco UCS Director リリース 5.5 パッチを http://www.cisco.com からダウンロードします。
アップグレードのインストールに使用する FTP または HTTP のサーバにソフトウェアを置きます。
NFS マウントがアプリケーション ストレージに使用されている場合は、パッチを適用する前に NFS マウントを無効にします。そうしなければ、アップグレードは失敗します。
(注) | アップグレードを開始する前に、VM のスナップショットを取得しておくことをお勧めします。取得しておくと、FTP サーバから既存の設定データベースをバックアップする必要はありません。 |