この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
Cisco Unified Communications Manager 一括管理(BAT)は、カンマ区切り値(CSV)ファイル形式で入力されたデータを使用して、最初のノード サーバ上の Cisco Unified Communications Manager データベースへの挿入トランザクションの情報を提供します。 CSV データ形式を使用すると、表形式のデータ レコードを含むテキスト ファイルを作成できます。
CSV データ ファイルを作成するには、Microsoft メモ帳などのテキスト エディタを使用します。 各レコードのデータは、別個の行で入力する必要があります。 各データ フィールドはカンマで区切り、ブランク フィールドにはカンマ区切り文字を指定します。 CSV ファイルにブランク行があると挿入トランザクション中にエラーが発生するので、データ ファイル内のすべての行にデータを入力します。
Cisco Unified Communications Manager データベースにデータ レコードを挿入する場合、BAT は最初のノード データベースを実行するサーバ上にある指定のフォルダ セットにアクセスします。 BAT がトランザクションの該当する CSV データ ファイルにアクセスできるようにするには、CSV データ ファイルを、 Cisco Unified Communications Manager の最初のノード データベース サーバにアップロードする必要があります。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
Microsoft メモ帳などのテキスト エディタを使用して、電話機、IP テレフォニー デバイス、およびユーザの組み合わせの CSV テキスト ファイルを作成することができます。
電話機を追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 各種の電話機タイプに対応して、異なる CSV データ ファイル形式があります。 CSV テキスト ファイルには適切な電話機ファイル形式を使用する必要があります。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
電話機のタイプごとに特定のデータ形式が必要です。 電話機のファイル形式でオプションとなっているフィールドであっても、所定の条件が満たされる場合は必須となることに注意してください。
次のサンプル形式に、電話機および固定ユーザの形式のテキストベース CSV ファイルのフィールド長、およびフィールドがオプションか必須かを示します。
First Name (Optional, up to 64 characters), Last Name (Mandatory, 1 to 64 characters), User ID (Mandatory, 1 to 128 characters), Password (Optional, up to 128 characters), Manager User ID (Optional, up to 128 characters, must use the ID that exists in global directory), Department (Optional, up to 64 characters), PIN (Optional, up to 20 numerals), Default Profile (Optional, up to 50 characters), User Locale (Optional, up to 50 characters), Telephone Number (Optional, up to 20 numerals), Primary Extension (Optional, up to 50 numerals), Associated PC (Optional, up to 50 characters), ICD Extension (Optional, up to 50 numerals), Mail ID (Optional, up to 255 characters), Presence Group (Optional, up to 50 characters), Subscribe Calling Search Space (Optional, up to 50 characters), MAC Address (Mandatory, up to 12 characters), Description (Optional, up to 50 characters), Location (Optional, up to 50 characters), Directory Number (Optional, up to 24 numerals and special characters), Display (Optional, up to 30 characters), Line Text Label (Optional, up to 30 characters), Forward Busy External (Optional, up to 50 numerals and special characters), Forward No Answer External (Optional, up to 50 numerals and special characters), Forward No Coverage External (Optional, up to 50 numerals and special characters), Forward Busy Internal (Optional, up to 50 numerals and special characters), Forward No Answer Internal (Optional, up to 50 numerals and special characters), Forward No Coverage Internal (Optional, up to 50 numerals and special characters), Call Pickup Group (Optional, up to 50 characters), Speed Dial (Optional, up to 50 numerals and special characters), Speed Dial Label (Optional, up to 30 characters)
John,Smith,johns,abcde,Daviss,12,12345,johnProfile,English United States,1,1231123245AB,Dallas, 9725557154,9725557154,Mike,9725557172,9725557196,9725557112, 9725557127,9725557158,9725557189,9725557121/TollByPass,1230000000,Helpdesk
次のサンプル形式に、CTI ポートおよび H.323 クライアントの形式のテキストベース CSV ファイルのフィールド長、およびフィールドがオプションか必須かを示します。
Device Name (Mandatory, up to 15 characters for CTI ports and up to 50 characters for H.323 Clients), Description (Optional, up to 50 characters) Location (Optional, up to 50 characters),User ID(Optional, 1 to 30 characters),Directory Number(Optional, up to 24 numerals and special characters),Display (Optional, up to 30 characters), Line Text Label (Optional, up to 30 characters), Forward Busy External(Optional, up to 50 numerals and special characters),Forward No Answer External (Optional, up to 50 numerals and special characters), Forward No Coverage External (Optional, up to 50 numerals and special characters), Forward Busy Internal (Optional, up to 50 numerals and special characters), Forward No Answer Internal (Optional, up to 50 numerals and special characters), Forward No Coverage Internal (Optional, up to 50 numerals and special characters), Call Pickup Group (Optional, up to 50/50 characters)
TAPS Port 1,CTI TAPS Port 1,Dallas,johns,9728437154,9728437154, Mike,9728437172,9728437196,9728437127,9728437154,9728437178, 9728437189,9728437121/TollByPass,1230000000,Helpdesk
次のサンプル形式に、CTI ポートとユーザ、および H.323 クライアントとユーザの形式のテキストベース CSV ファイルのフィールド長、およびフィールドがオプションか必須かを示します。
First Name (Optional, up to 64 characters), Last Name (Mandatory, 1 to 64 characters), User ID (Mandatory, 1-128 characters), Password (Optional, up to 128 characters), Manager User ID (Optional, up to 128 characters, must use existing ID in global directory), Department (Optional, up to 64 characters), PIN (Optional, up to 128 numerals), Default Profile (Optional, up to 50 characters), User Locale (Optional, up to 50 characters), Telephone Number (Optional, up to 64 numerals), Primary Extension (Optional, up to 50 numerals), Associated PC (Optional, up to 50 characters), ICD Extension (Optional, up to 50 numerals), Mail ID (Optional, up to 255 characters), Presence Group (Optional, up to 50 characters), Subscribe Calling Search Space (Optional, up to 50 characters),Device Name (Mandatory, up to 15 characters for CTI ports-users combination and up to 50 characters for H.323client-users combinations),Description (Optional, up to 50 characters), Location (Optional, up to 50 characters), Directory Number (Optional, up to 24 numerals and special characters), Display (Optional, up to 30 characters), Line Text Label (Optional, up to 30 characters), Forward Busy External (Optional, up to 50 numerals and special characters), Forward No Answer External (Optional, up to 50 numerals and special characters), Forward No Coverage External (Optional, up to 50 numerals and special characters), Forward Busy Internal (Optional, up to 50 numerals and special characters), Forward No Answer Internal (Optional, up to 50 numerals and special characters), Forward No Coverage Internal (Optional, up to 50 numerals and special characters), Call Pickup Group (Optional, up to 50 characters)
John,Smith,johns,abcde,Daviss,12,12345,johnProfile,English United States,1,TAPS Port 1,CTI TAPS Port 1,9725557154,9725557154,Mike,9725557172,9725557196,9725557112,9725557127,9725557158, 9725557189,9725557121/TollByPass,1230000000,Helpdesk
(注) |
いずれかのフィールドの中で、カンマまたは二重引用符を値の一部として使用する場合は、テキスト値全体を二重引用符で囲んで、これを 1 つの値として指定する必要があります。 たとえば、John, Bill をテキスト値として入力する場合は、「"John,Bill"」と入力する必要があります。 値に二重引用符を入力する場合は、二重引用符を 2 つの連続した二重引用符に置き換え、その値全体を二重引用符で囲む必要があります。 たとえば、John "Chief は「"John""Chief"」と入力する必要があります。 |
エクスポート ユーティリティを使用して電話機レコードのすべての詳細を含むファイルを生成する場合、エクスポート ファイルは次の形式にする必要があります。
注意 |
エクスポート ユーティリティで生成したファイルは、編集しないことをお勧めします。 Logout time や Login time などのフィールドはシステムが動的に生成するため、一切編集しないでください。 Login User ID フィールドと Product Specific XML フィールドは、適切に動作するには正確である必要があるので、編集しないでください。 製品固有の設定を更新するには、BAT を使用します。 |
Device Name,Description,Device Pool,Phone Template,CSS,AAR CSS,Location,Extension Mobility,Network Locale,Media Resource Group List,User Hold Audio Source,Network Hold Audio Source,Device User Locale,Signal Packet Capture Mode,Packet Capture Duration,Built in Bridge,Privacy,Retry Video Call as Audio,Ignore Presentation Indicators,Softkey Template,Module 1,Module 2,Phone Load Name,Module 1 Load Name,Module 2 Load Name,Information,Directory,Messages,Services,Authentication Server,Proxy Server,Idle,Idle Timer,MLPP Indication,MLPP Preemption,MLPP Domain,Device Type,User ID,Common Profile,Owner User ID,Allow CTI Control Flag,Device Presence Group,Security Profile,Device Subscribe CSS,Unattended Port,Require DTMF Reception,RFC2833 Disabled,Certificate Operation,Authentication String,Certification Operation Completion Time,Device Protocol,Secure Shell User,Secure Shell Password,XML,Dial Rules,CSS Reroute,CSS Refer,DTMF Signalling,Default DTMF Capability,SIP Profile,SIPCodec_MTPPreferredOrigCodec,Logout Profile,MTP Required,Digest User,Always Use Prime Line,Always Use Prime Line for Voice Messages,Geo Location
Directory Number,Partition,Voice Mail Profile,Line CSS,AAR Group,Line User Hold Audio Source,Line Network Hold Audio Source,Auto Answer,Forward All Voice Mail,Forward All Destination,Forward All CSS,Forward Busy Internal Voice Mail,Forward Busy Internal Destination,Forward Busy Internal CSS,Forward Busy External Voice Mail,Forward Busy External Destination,Forward Busy External CSS,Forward No Answer Internal Voice Mail,Forward No Answer Internal Destination,Forward No Answer Internal CSS,Forward No Answer External Voice Mail,Forward No Answer External Destination,Forward No Answer External CSS,Forward No Coverage Internal Voice Mail,Forward No Coverage Internal Destination,Forward No Coverage Internal CSS,Forward No Coverage External Voice Mail,Forward No Coverage External Destination,Forward No Coverage External CSS,Forward No Answer Ring Duration,Call Pickup Group,MLPP Target,MLPP CSS,MLPP No Answer Ring Duration,Line Text Label,External Phone Number Mask,Maximum Number of Calls,Busy Trigger,Message Waiting Lamp Policy,Ring setting (Phone Idle),Ring Setting (Phone Active),Caller Name,Caller Number,Redirected Number,Dialed Number,Line Description,Alerting Name,Alerting Name ASCII,Line Presence Group,Secondary CSS for Forward All,Forward on CTI Failure Voice Mail,Forward on CTI Failure Destination,Forward on CTI Failure CSS,Display,ASCII DisplayParty Entrance Tone,Log Missed Calls,Park Monitor Forward No Retrieve Ext Voice Mail,Park Monitor Forward No Retrieve Int Voice Mail,Park Monitor Forward No Retrieve Ext CSS,Park Monitor Forward No Retrieve Int CSS,Park Monitor Forward No Retrieve Ext Destination,Park Monitor Forward No Retrieve Int Destination,Park Monitor Reversion Timer
Speed Dial Number,Speed Dial Label,Speed Dial Label ASCII,Service Name,Subscribed Service Name,Subscribed Service Name ASCII,Parameter Name,Parameter Value,Busy Lamp Field Destination,Busy Lamp Field Directory Number,Busy Lamp Field Label,Busy Lamp Field Label ASCII
電話テンプレートで Forward Busy Destination が 3001 の場合、CSV ファイル内で Forward Busy Destination に値の指定がないすべてのレコードは、3001 を使用します。
1231123245AB,SEP1231123245AB,Dallas,johns,9728437154,9728437154,Mike,,9728437196,9728437127, 9728437154,9728437178,9728437189,9728437121/TollByPass,1230000000,Helpdesk
1231123245AB,,Dallas,johns,9728437154,9728437154,Mike,9728437172,9728437196, 9728437127,9728437154,9728437178,9728437189,9728437121/TollByPass,1230000000,Helpdesk
アクティブな回線が不要で、ロケーションもブランクの場合は、次の形式で指定します。
1231123245AB,SEP1231123245AB,,,1230000000,HelpDesk
アクティブな回線が 2 回線必要な場合は、次の形式で指定します。
1231123245AB,SEP1231123245AB,Dallas,johns,9725557154,9725557154,Mike,9725557172,9725557196, 9728437127,9728437154,9728437178,9728437189,9725557121/TollByPass,9725557155,9725557155, Kelvin,9725557133,9725557196,9728437112,9728437145,9728437187,9728437198,9725557112/ TollByPass,1230000000,Helpdesk
(注) |
MAC Address については、MAC アドレス値を入力するか、ダミー MAC アドレスの作成オプションのチェックボックスをオンにしてください。 |
単一の回線が必要であるときに、必須値だけを組み込み、オプション値をまったく組み込まない場合は、次の形式で指定します。
1231123245AB,,,,9725557154,,,,,
ダミー MAC アドレスのオプションがオンになっていて、1 回線を使用する場合は、次の形式で指定します。
,Dallas,9725557154,9725557154,Mike,9725557172,9725557196,9728437127,9728437154,9728437178, 9728437189,9725557121/TollByPass,johns,1230000000,Helpdesk
Microsoft メモ帳などのテキスト エディタを使用して、ユーザ用の CSV テキスト ファイルを作成することができます。
ユーザを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 ユーザ用の CSV テキスト ファイルにはユーザ ファイル形式を使用する必要があります。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
ヒント |
暗証番号とパスワードの値は、CSV ファイル上に指定するか、BAT を使用してファイルを挿入するときに指定する必要があります。 ユーザまたはユーザのグループごとに個別の暗証番号またはパスワードを適用する場合は、CSV ファイルに暗証番号とパスワードを指定してください。 すべてのユーザが使用できるデフォルトの暗証番号とパスワードを使用する場合は、CSV ファイルに暗証番号またはパスワードの値を指定するのではなく、BAT を使用して CSV ファイルを Cisco Unified Communications Manager に挿入するときに指定してください。 |
次のサンプル形式と例に、ユーザ用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
First Name (Optional, up to 64 characters), Last Name (Mandatory, 1 to 64 characters), User ID(Mandatory, up to 128 characters), Manager User ID (Optional, up to 128 characters, must use existing ID in global directory), Department (Optional, up to 64 characters), PIN (Optional, up to 128 numerals), Default Profile (Optional, up to 50 characters), User Locale (Optional, up to 50 characters), Telephone Number (Optional, up to 64 numerals), Primary Extension (Optional, up to 50 numerals), Associated PC (Optional, up to 50 characters), ICD Extension (Optional, up to 50 numerals), Mail ID (Optional, up to 255 characters), Presence Group (Optional, up to 50 characters), Subscribe Calling Search Space (Optional, up to 50 characters).
John,Smith,johns,abc123de,karend,0012055,9989,johns profile,English United States,SEP1231123245AB,9725557154,SEP0010EB001234
フィールドがブランクであっても、区切り文字を指定する必要があります。 CSV ファイルの作成時には、次の例とサンプル CSV レコードを参照してください。
ユーザのマネージャがブランクである場合は、次の形式で指定します。
John,Smith,johns,abc123de,,0012055,9989,johns profile,English United States,SEP1231123245AB,9725557154,SEP0010EB001234
Smith,johns,,,,,,,,
必須フィールドだけを指定して、ユーザを電話機に関連付ける場合は、次の形式で指定します。
Smith,johns,,,,,,,SEP1231123245AB,
ユーザは、複数のデバイスを制御できます。 追加デバイスのデバイス名を、レコードの終わりに追加できます。
ユーザが 1 台のデバイスだけを制御する場合は、次の形式で指定します。
John,Smith,johns,abc123de,karend,0012055,9989,johns profile,English United States,SEP1231123245AB,9725557154
ユーザが 3 台のデバイスを制御する場合は、次の形式で指定します。
John,Smith,johns,abc123de,karend,0012055,9989,johns profile,English UnitedStates,SEP1231123245AB,9725557154,SEP0010EB001234,SEP0010EB432101
ユーザ更新用の CSV テキスト ファイルを作成するには、テキスト エディタを使用します。 ファイルを最初のノード サーバにアップロードします。
レコードを更新する場合は、ファイルのすべての必須フィールドを指定する必要があります。 すでに値を格納しているにもかかわらず、オプション フィールドをブランクにしてレコードを更新すると、その値はブランクにリセットされます。 更新時に、すでに格納されている値を保持することができます。
次のサンプル形式に、ユーザ更新用のフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
User ID (Mandatory, 1 to 128 characters), Password (Optional, up to 128 characters), Manager (Optional, up to 128 characters, must use existing ID in global directory), Department (Optional, up to 64 characters), PIN (Optional, up to 128 numerals), Default Profile (Optional, up to 50 characters), User Locale (Optional, up to 50 characters), Telephone Number (Optional, up to 64 numerals), Primary Extension (Optional, up to 50 numerals), Associated PC (Optional, up to 50 characters), ICD Extension (Optional, up to 50 numerals), Mail ID (Optional, up to 255 characters).
johns,Daviss,123,johnProfile,English United States,SEP8612113425AC,9725557154
(注) |
フィールドがブランクであっても、区切り文字を指定する必要があります。 CSV ファイルの作成時には、次の例とサンプル CSV レコードを参照してください。 |
ユーザのマネージャがブランクである場合は、 次の形式で指定します。
johns,,123,johnProfile,English United States,SEP8612113425AC,9725557154
John,Daviss,123,johnProfile,,,
Microsoft メモ帳などのテキスト エディタを使用して、ユーザ デバイス プロファイル用の CSV テキスト ファイルを作成することができます。
ユーザ デバイス プロファイルを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 CSV テキスト ファイルにはユーザ デバイス プロファイルのファイル形式を使用する必要があります。
(注) |
いずれかのフィールドの中で、カンマまたは二重引用符を文字列として使用する場合は、テキスト全体を二重引用符で囲む必要があります。 |
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 | ||
ステップ 2 |
Cisco Unified Communications Manager に追加するユーザ デバイス プロファイルの値を、プロファイルごとに行を変えて入力します。
|
||
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
次のサンプル形式に、ユーザ デバイス プロファイル用のフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
Device Profile Name(Mandatory, 1 to 50 characters),Description(Optional, 1 to 50 characters),Login UserID (Optional, 4 to 30 characters),Directory Number(Optional, up to 24 numerals and special characters),Display(Optional, for internal Caller ID, up to 30 characters),Line Text Label(Optional, up to 30 characters),Forward Busy External Destination(Optional, up to 50 numerals),Forward No Answer External Destination(Optional, up to 50 numerals),Forward No Coverage External(Optional, up to 50 numerals),Forward Busy Internal Destination(Optional, up to 50 numerals),Forward No Answer Internal Destination(Optional, up to 50 numerals),Forward No Coverage Internal(Optional, up to 50 numerals),Call Pickup Group(Optional, up to 50/50 characters),Speed Dial Number(Optional, up to 50 numerals),Speed Dial Label(optional, up to 30 characters)
John Profile,John's Profile,Johns,9725557154,9725557154,Mike,9725557172,9725557196, 9725557126,9725557154,9725557178,9725557189,9725557121/TollByPass,1230000000,Helpdesk
フィールドがブランクであっても、区切り文字を指定する必要があります。 次の例は、Display の設定値を指定しない場合の正しい形式を示しています。
John Profile,John's Profile,Johns,9725557154,,Mike,9725557172,9725557196,9725557126,9725557154,9725557178, 9725557189,9725557121/TollByPass,1230000000,Helpdesk
プロファイルに回線を設定せず、必須フィールドだけを追加する場合は、次の例のように指定します。
John Profile,,,,
必須フィールドだけを入力し、ユーザ デバイス プロファイルを電話番号 1 つだけに関連付ける場合は、次のようになります。
John Profile,,,9725557154,,,,,
次のサンプル形式に、2 つの回線を持つユーザ デバイス プロファイル用の CSV ファイルのフィールド長と文字列タイプを示します。
User Device Profile Name(Mandatory, 1 to 50 characters),Description(Optional, 1 to 50 characters),Login UserID (Optional, 4 to 30 characters),Directory Number1(Optional, up to 24 numerals and special characters),Display1(Optional, for internal Caller ID, up to 30 characters),Line Text Label1(Optional, up to 30 characters),Forward Busy External Destination1(Optional, up to 50 numerals),Forward No Answer External Destination1(Optional, up to 50 numerals),Forward No Coverage External Destination1(Optional, up to 50 numerals),Forward Busy Intermal Destination1(Optional, up to 50 numerals),Forward No Answer Internal Destination1(Optional, up to 50 numerals),Forward No Coverage Internal Destination1(Optional, up to 50 numerals),Call Pickup Group1(Optional, up to 50/50 characters),Directory Number2(Optional, up to 24 numerals and special characters),Display2(Optional, for internal Caller ID, up to 30 characters),Line Text Label2(Optional, up to 30 characters),Forward Busy External Destination2(Optional, up to 50 numerals),Forward No Answer External Destination2(Optional, up to 50 numerals),Forward No Coverage External Destination2(Optional, up to 50 numerals),Forward Busy Intermal Destination2(Optional, up to 50 numerals),Forward No Answer Internal Destination2(Optional, up to 50 numerals),Forward No Coverage Internal Destination2(Optional, up to 50 numerals),Call Pickup Group2(Optional, up to 50/50 characters),Speed Dial Number1(Optional, up to 50 numerals),Speed Dial Label1(optional, up to 30 characters),Speed Dial Number2(Optional, up to 50 numerals),Speed Dial Label2(optional, up to 30 characters)
John Profile,John's Profile,John’s,9725557154,9725557154,Mike,9725557172,9725557196,9725557126,9725557154, 9725557178,9725557189,9725557121/TollByPass,9725557155,9725557155,Kelvin,9725557133,9725557196, 9725557113,9725557145,9725557187,9725557198,9725557112/TollByPass,1230000000,Helpdesk, 2149523460,Keith
エクスポート ユーティリティを使用してユーザ デバイス プロファイルのすべての詳細を含むファイルを生成する場合、エクスポート ファイルは次の形式になります。 次の例で、すべての詳細エクスポート ファイル内のフィールドの長さおよびタイプを示します。
エクスポート ユーティリティは、ユーザ デバイス プロファイルのモデル固有フィールドは生成しません。
注意 |
エクスポート ユーティリティで生成したファイルは、編集しないことをお勧めします。 Logout time や Login time などの一部のフィールドはシステムが動的に生成するため、一切編集しないでください。 Login User ID フィールドと Product Specific XML フィールドは、適切に動作するには正確である必要があるので、編集しないでください。 製品固有の設定を更新するには、BAT を使用します。 |
Device Profile Name,Description,Device Pool,Phone Template,CSS,AAR CSS,Location,Extension Mobility,Network Locale,Media Resource Group List,User Hold Audio Source,Network Hold Audio Source,Device User Locale,Signal Packet Capture Mode,Packet Capture Duration,Built in Bridge,Privacy,Retry Video Call as Audio,Ignore Presentation Indicators,Softkey Template,Module 1,Module 2,Phone Load Name,Module 1 Load Name,Module 2 Load Name,Information,Directory,Messages,Services,Authentication Server,Proxy Server,Idle,Idle Timer,MLPP Indication,MLPP Preemption,MLPP Domain,Device Type,User ID,Common Profile,Owner User ID,Allow CTI Control Flag,Device Presence Group,Security Profile,Device Subscribe CSS,Unattended Port,Require DTMF Reception,RFC2833 Disabled,Certificate Operation,Authentication String,Certification Operation Completion Time,Device Protocol,Secure Shell User,Secure Shell Password,XML,Dial Rules,CSS Reroute,CSS Refer,DTMF Signalling,Default DTMF Capability,SIP Profile,SIPCodec_MTPPreferredOrigCodec,Logout Profile,MTP Required,Digest User,Always Use Prime Line,Always Use Prime Line for Voice Message
Directory Number,Partition,Voice Mail Profile,Line CSS,AAR Group,Line User Hold Audio Source,Line Network Hold Audio Source,Auto Answer,Forward All Voice Mail,Forward All Destination,Forward All CSS,Forward Busy Internal Voice Mail,Forward Busy Internal Destination,Forward Busy Internal CSS,Forward Busy External Voice Mail,Forward Busy External Destination,Forward Busy External CSS,Forward No Answer Internal Voice Mail,Forward No Answer Internal Destination,Forward No Answer Internal CSS,Forward No Answer External Voice Mail,Forward No Answer External Destination,Forward No Answer External CSS,Forward No Coverage Internal Voice Mail,Forward No Coverage Internal Destination,Forward No Coverage Internal CSS,Forward No Coverage External Voice Mail,Forward No Coverage External Destination,Forward No Coverage External CSS,Forward No Answer Ring Duration,Call Pickup Group,MLPP Target,MLPP CSS,MLPP No Answer Ring Duration,Line Text Label,External Phone Number Mask,Maximum Number of Calls,Busy Trigger,Message Waiting Lamp Policy,Ring setting (Phone Idle),Ring Setting (Phone Active),Caller Name,Caller Number,Redirected Number,Dialed Number,Line Description,Alerting Name,Alerting Name ASCII,Line Presence Group,Secondary CSS for Forward All,Forward on CTI Failure Voice Mail,Forward on CTI Failure Destination,Forward on CTI Failure CSS,Display,ASCII Display,Party Entrance Tone,Log Missed Calls,Park Monitor Forward No Retrieve Ext Voice Mail,Park Monitor Forward No Retrieve Int Voice Mail,Park Monitor Forward No Retrieve Ext CSS,Park Monitor Forward No Retrieve Int CSS,Park Monitor Forward No Retrieve Ext Destination,Park Monitor Forward No Retrieve Int Destination,Park Monitor Reversion Timer
Speed Dial Number,Speed Dial Label,Speed Dial Label ASCII,Service Name,Subscribed Service Name,Subscribed Service Name ASCII,Parameter Name,Parameter Value,Busy Lamp Field Destination,Busy Lamp Field Directory Number,Busy Lamp Field Label,Busy Lamp Field Label ASCII
(注) |
ブール値の設定には、True と False を使用します。 |
Microsoft メモ帳などのテキスト エディタを使用して、Unified CM Assistant マネージャとアシスタント用の CSV テキスト ファイルを作成することができます。
Unified CM Assistant マネージャとアシスタントを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 CSV テキスト ファイルにはマネージャとアシスタントのファイル形式を使用する必要があります。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 | ||
ステップ 2 |
Cisco Unified Communications Manager に追加するマネージャとアシスタントのアソシエーションの値を、アソシエーションごとに行を変えて入力します。
マネージャとアシスタントのユーザ ID をカンマで区切ってレコードの末尾に入力すると、1 人のマネージャに複数のアシスタントを割り当てることができます。 |
||
ステップ 3 |
CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
|
CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
次のサンプル形式と例に、Unified Communications Manager Assistant のマネージャとアシスタントのアソシエーション用のフィールド長と文字列タイプを示します。 Manager ID にはマネージャのユーザ ID を、Assistant ID にはアシスタントのユーザ ID を指定します。 Assistant ID を最初にセットしてその後に Manager ID のリストを続けると、1 人のアシスタントに複数のマネージャを関連付けることもできます。 CSV ファイルを挿入するときに、アソシエーションのタイプを選択します。
マネージャとアシスタントのアソシエーションには、次のデフォルト形式を使用します。
ManagerID (Mandatory, 1 to 30 characters),AssistantID 1 (Mandatory, 1 to 30 characters),AssistantID 2 (Optional, 1 to 30 characters)...AssistantID # (Optional, 1 to 30 characters)
Johns,Mikeh,Larryh
アシスタントとマネージャのアソシエーションには、次のデフォルト形式を使用します。
AssistantID (Mandatory, 1 to 30 characters),ManagerID 1(Mandatory, 1 to 30 characters),ManagerID 2 (Optional, 1 to 30 characters)...ManagerID # (Optional, 1 to 30 characters)
Larryh,Johns,Mikeb,Karend
プロキシ回線設定の場合、アシスタント電話機にプロキシ回線を指定する CSV データファイルを次の形式で作成できます。
ManagerID (Mandatory, 1 to 30 characters),Device Name (Optional, 15 characters),Intercom DN (Optional, 1 to 24 characters),Assistant User ID (Mandatory, 1 to 30 characters),Device Name (Optional, 15 characters),Intercom DN (Optional, 1 to 24 characters),Proxy Line DN (Mandatory, 1to 24 characters),Manager Line DN (Mandatory, 1 to 24 characters)
Johns,SEP1231123245AB,90001,Mikeh,SEP2342342342AB,20001,20002,90002
Microsoft メモ帳などのテキスト エディタを使用して、VG200 ゲートウェイ用の CSV テキスト ファイルを作成することができます。
Cisco VG200 ゲートウェイを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 トランクのタイプとゲートウェイのポートに適したファイル形式を使用する必要があります。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 | ||
ステップ 2 |
Cisco Unified Communications Manager に追加する各ゲートウェイとポートの値を、ゲートウェイごとに行を変えて入力します。
|
||
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
次のサンプル形式に、Cisco VG200 ゲートウェイ用の必要なフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
MGCP Domain Name(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters), Slot (Mandatory, up to 3 numerals), Subunit (Mandatory, up to 3 numerals), Port Number(Mandatory, up to 3 numerals), Port Description Optional, up to 50 characters),Port Directory Number(Optional, up to 24 numerals and special characters)
MGCPTest,VG200 Lab Gateway,0,1,0,Port 0,97255576601MGCPTest,VG200 Lab Gateway,0,1,1,Port 1,97255572001
(注) |
フィールドがブランクであっても、カンマ区切り文字を指定する必要があります。 電話番号とルート パーティションは、Cisco VG200 ゲートウェイ テンプレート内のポートタイプが POTS の場合にだけ指定してください。 |
Cisco VG200 ゲートウェイの Description がブランクの場合は、次の形式で指定します。
MGCPTest, ,0,1,0,Port 0,97255576601
次のサンプル形式に、Cisco VG200 ゲートウェイ用の必要なフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
MGCP Domain Name(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters),Slot(Mandatory, up to 3 numerals),Subunit(Mandatory, up to 3 numerals),Port Number(Mandatory, up to 3 numerals),Port Description (Optional, up to 50 characters),CAS Port Number(Optional, up to 3 numerals)
MGCPTest,VG200 Lab Gateway,001,001,001,,,
MGCP Domain Name(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters),Slot(Mandatory, up to 3 numerals), Subunit(Mandatory, up to 3 numerals), Port Number(Mandatory, up to 3 numerals), Port Description (Optional, up to 50 characters)
MGCPTest,VG200 Lab Gateway,001,001,001,,
(注) |
フィールドがブランクであっても、カンマ区切り文字を指定する必要があります。 |
MGCPTest,,001,001,001,,
Cisco VG200 ゲートウェイの Description がブランクの場合は、次のオプションを使います。
MGCPTest,,001001,001,001,MGCP Port,
ポート識別子の場合、最初の数字は 0 または 1(Sub-Unit 0 か Sub-Unit 1 のいずれかを示す)とし、その後にポート番号 01 ~ 24 を続けます。 許容値は 001 ~ 024 または 101 ~ 124 です。 Cisco VG200 ゲートウェイ テンプレートに 3 つのポート識別子がある場合は、このオプションを使用します。
MGCPTest,VG200 Lab Gateway,001,002,003
Microsoft メモ帳などのテキスト エディタを使用して、VG224 ゲートウェイ用の CSV テキスト ファイルを作成することができます。
Cisco VG224 ゲートウェイを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 トランクのタイプとゲートウェイのポートに適したファイル形式を使用する必要があります。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 | ||
ステップ 2 |
Cisco Unified Communications Manager に追加する各ゲートウェイとポートの値を、ゲートウェイごとに行を変えて入力します。
|
||
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
次のサンプル形式に、Cisco VG224 ゲートウェイ用の必要なフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
MGCP Domain Name(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters),Slot(Mandatory, up to 3 numerals), Subunit (Mandatory, up to 3 numerals), Port Number(Mandatory, up to 3 numerals), Port Description Optional, up to 50 characters),Port Directory Number(Optional, up to 24 numerals and special characters)
MGCPTest,VG224 Lab Gateway,2,0,0,Port 0,97255576601MGCPTest,VG224 Lab Gateway,2,0,1,Port 1,97255572001
(注) |
フィールドがブランクであっても、カンマ区切り文字を指定する必要があります。 電話番号とルート パーティションは、Cisco VG224 ゲートウェイ テンプレート内のポートタイプが POTS の場合にだけ指定してください。 |
Cisco VG224 ゲートウェイの Description がブランクの場合は、次の形式で指定します。
MGCPTest, ,2,0,0,Port 0,97255576601
Microsoft メモ帳などのテキスト エディタを使用して、Cisco Catalyst 6000 FXS ポート用の CSV テキスト ファイルを作成することができます。
Cisco Catalyst 6000 FXS ポートを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 ゲートウェイのタイプに適したファイル形式を使用する必要があります。
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 | ||
ステップ 2 |
Cisco Unified Communications Manager に追加するポートごとに、行を変えて値を入力します。
|
||
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
CSV ファイルには、各ポートの情報がレコードとして含まれています。 各レコードは、ポートの詳細を追加または更新する先のゲートウェイの MAC アドレス、およびそのゲートウェイ上のポート番号を指定します。
(注) |
BAT は、Cisco Catalyst 6000 (FXS) ゲートウェイを追加しません。 既存のゲートウェイにポートを追加するか、ポートを更新するだけです。 |
MAC アドレスには、既存の Cisco Catalyst 6000 (FXS) ゲートウェイの MAC アドレス値を入力しないでください。 この MAC アドレスは、Gateway Name の末尾の 12 文字分で構成されています。
CSV ファイル上のレコードで Partition に値を指定しない場合、これらのフィールドには BAT テンプレートからの値が使用されます。
次のサンプル形式に、Catalyst 6000 (FXS) ポート用の必要なフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
MAC Address (Mandatory, 12 characters),Port Number (Mandatory, 2 numerals),Directory Number(Optional, up to 24 numerals and special characters)
1231123245AB,23,9725557250
(注) |
フィールドがブランクであっても、カンマ区切り文字を指定する必要があります。 |
(注) |
電話番号も指定している場合以外は、パーティションを指定しないでください。 |
ポートの電話番号がブランクである場合は、次の形式で指定します。
1231123245AB,23,
1231123245AB,23,
Microsoft メモ帳などのテキスト エディタを使用して、VG202 または VG204 ゲートウェイ用の CSV テキスト ファイルを作成することができます。
Cisco VG202 および VG204 ゲートウェイを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 ゲートウェイに適したファイル形式を使用する必要があります。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 | ||
ステップ 2 |
Cisco Unified Communications Manager に追加する各ゲートウェイとポートの値を、ゲートウェイごとに行を変えて入力します。
|
||
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
次のサンプル形式と例に、VG202 および VG204 ゲートウェイ用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
VG202 および VG204 ゲートウェイ用の CSV ファイル形式には、プロトコルに応じて次の 2 種類があります。
Domain Name(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters),Slot(Mandatory, up to 3 numerals),Subunit(Mandatory, up to 3 numerals),Port Number(Mandatory, up to 3 numerals),Port Description(Optional, up to 50 characters),Port Directory Number(Optional, up to 24 numerals and special characters).
test,test,0,0,0,sample,1000
Mac Address(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters),Slot(Mandatory, up to 3 numerals),Subunit(Mandatory, up to 3 numerals),Port Number(Mandatory, up to 3 numerals),Port Description(Optional, up to 50 characters),Port Directory Number(Optional, up to 24 numerals and special characters).
SKIGW1111111111,test,0,0,0,sample,1000
Microsoft メモ帳などのテキスト エディタを使用して、テキストベースのカスタム CSV ファイルを作成することができます。
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 | ||
ステップ 2 |
コードごとに個別の行を使用して、カスタムのクライアント識別コード(CMC)用 CSV ファイルまたは強制承認コード(FAC)用 CSV ファイルを作成します。手順は、次のとおりです。
|
||
ステップ 3 |
CMC 用 CSV ファイルを作成するために、該当する情報を入力します。ここで、x、y は次のフィールドを表します。
たとえば、「5555,Acme Toys」のように入力することができます。ここで、5555 は Client Matter Code(必須)、Acme Toys は Description にそれぞれ相当します。 |
||
ステップ 4 |
FAC 用 CSV ファイルを作成するために、該当する情報を入力します。ここで、x、y、z は次のフィールドを表します。
たとえば、「1234,John Smith,20」のように入力することができます。ここで、1234 は Forced Authorization Code、John Smith は Authorization Code Name、20 は Authorization Level にそれぞれ相当します。
|
||
ステップ 5 |
CSV ファイルを
Cisco Unified Communications Manager の最初のノードにアップロードします。 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
|
||
ステップ 6 |
次のいずれかの手順を実行します。
|
次のサンプル形式と例に、クライアント識別コード用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Client Matter Code(Mandatory, 1 to 16 numerals),Description(Optional, 1 to 50 Characters)
1234567890123456,Marketing
フィールドの値にカンマが含まれている場合、そのフィールドは二重引用符で囲んでください。 カンマが含まれているフィールドは、次の形式で指定します。
1234567890123456, "Marketing, team"
クライアント識別コード更新用の CSV テキスト ファイルを作成するには、テキスト エディタを使用します。
次のサンプル形式はクライアント識別コード更新用のフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
Client Matter Code(Mandatory, 1 to 16 numerals),Description(Optional, 1 to 50 Characters)
1234567890123456,Marketing
Description が空の場合は、次の形式で指定します。
1234567890123456,
次のサンプル形式と例に、強制承認コード用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Forced Authorization Code(Mandatory, 1 to 16 numerals),Authorization Code Name (Mandatory, 1 to 50 Characters),Authorization Level(Mandatory,values range from 0 to 255)
1234567890123456,John FAC,251
強制承認コード更新用の CSV テキスト ファイルを作成するには、テキスト エディタを使用します。
次のサンプル形式は強制承認コード更新用のフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
Forced Authorization Code(必須、1 ~ 16 桁の数字),Authorization Code Name(必須、1 ~ 50 文字),Authorization Level(必須、値の範囲は 0 ~ 255)
1234567890123456,John FAC,251
更新しない値にも区切り文字を組み込む必要があります。 Authorization Code Name だけを更新する必要がある場合は、次の形式で指定します。
1234567890123456,John FAC,
Authorization Level だけを更新する必要がある場合は、次の形式で指定します。
1234567890123456,John FAC,220
Microsoft メモ帳などのテキスト エディタを使用して、コール ピックアップ グループ用のテキストベースのカスタム CSV ファイルを作成することができます。
ステップ 1 |
テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 コール ピックアップ グループ名ごとに別個の行を使用します。 |
||
ステップ 2 |
Pickup Group Name, Pickup Group Number, Partition, Other Pickup Group Name-Member1... Other Pickup Group Name-Member10 の値を入力します。 たとえば、「Marketing,7815,Part1,Marketing,Managers,Training」のように入力します。ここで、Marketing は必須のピックアップ グループ名、7815 は必須のピックアップ グループ番号です。 Part1 はパーティション、Marketing、Managers、および Training はピックアップ グループ Marketing に関連するその他のピックアップ グループ名です。
|
||
ステップ 3 |
CSV ファイルを
Cisco Unified Communications Manager の最初のノードにアップロードします。 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
|
||
ステップ 4 | 次のいずれかの手順を実行します。 |
次のサンプル形式と例に、コール ピックアップ グループ用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Pickup Group Name(Mandatory, 1 to 50 characters),Pickup Group Number(Mandatory, 1 to 24 numerals),Partition(Optional, 1 to 50 Characters),Other Pickup Group Name-Member1... Other Pickup Group Name-Member10(Optional, 1 to 50 Characters)
Marketing,7815,Part1,Marketing,Managers,Training
Other Pickup Group Name-Member(x) 以外は、この時点で指定しないオプション値にも区切り文字(カンマ)を付ける必要があります。
ピックアップ グループの Partition がブランクの場合は、次の形式で指定します。
Marketing,7815,
コール ピックアップ グループ更新用の CSV テキスト ファイルを作成するには、テキスト エディタを使用します。
次のサンプル形式に、コール ピックアップ グループ更新用のフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
Pickup Group Name(Mandatory, 1 to 50 characters),Pickup Group Number(Mandatory, 1 to 24 numerals),Partition(Optional, 1 to 50 Characters),Other Pickup Group Name-Member1... Other Pickup Group Name-Member10(Optional, 1 to 50 Characters)
Marketing,,,Marketing,Managers,Training
Marketing,,,Managers,Marketing,Training
Other Pickup Group Name-Member(x) を更新しない場合は、区切り文字(カンマ)を付けないでください。 次の形式を使用します。
リモート接続先プロファイル(RDP)を追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | Cisco Unified Communications Manager に追加する各 RDP の値を、RDP ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
電話機を移行するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | 移行する各電話機の値を、電話機ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
次のサンプル形式と例に、電話の移行用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Old Device Name(Mandatory, 1 to 50 characters),New Device MAC Address(Mandatory, 12 characters)Description(Optional, 1 to 50 characters).
Old Device Name,New Device MAC Address,Description
SEP123456789012,123333789012,Marketing
IME 信頼要素設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | 追加する各 IME 信頼要素設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
次のサンプル形式と例に、IME 信頼要素設定用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Name(必須、1 ~ 50 文字), Description(オプション、1 ~ 128 文字), Element Type(必須、1 ~ 50 文字), Cisco IME Link Route Filter Group(必須、1 ~ 50 文字)
Name, Description, Element Type, Cisco IME Link Route Filter Group
Elem1,sample_file,Prefix,grp1
IME 信頼グループ設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | 追加する各 IME 信頼グループ設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
次のサンプル形式と例に、IME 信頼グループ設定用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Name(必須、1 ~ 50 文字), Description(オプション、1 ~ 128 文字), Element Type(必須、1 ~ 50 文字), Cisco IME Link Route Filter Group(必須、T または F)
grp1,sample_file,t
IME 登録済みグループ設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | 追加する各 IME 登録済みグループ設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
次のサンプル形式と例に、IME 登録済みグループ設定用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Group Name(必須、1 ~ 50 文字), Description(オプション1 ~ 128 文字), Fallback Profile(オプション、1 ~ 50 文字), All Patterns In Group Are Aliases(オプション、T または F)
Group Name, Description,Fallback Profile, All Patterns In Group Are Aliases
Enrol_grp1,sample_file,profile1,t
IME 除外グループ設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | 追加する各 IME 除外グループ設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。 サーバへのファイルのアップロードを参照してください。
次のサンプル形式と例に、IME 除外グループ設定用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Exclu_grp1,sample_file
フォールバック プロファイル設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | 追加する各フォールバック プロファイル設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
次のサンプル形式と例に、フォールバック プロファイル設定用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Name(必須、1 ~ 50 文字), Description (オプション、1 ~ 128 文字), Advertised Fallback Directory E.164 Number(オプション、1 ~ 16 文字), Fallback Qos Sensitivity Level(必須、1 ~ 2 文字), Fallback Call CSS(必須、1 ~ 2 文字), Fallback Call Answer Timer(必須、1 ~ 2 文字), Fallback Directory Number Partition(必須、1 ~ 50 文字), Fallback Directory Number (必須、1 ~ 50 文字), Number of Digits for Caller Id Partial Match(必須、1 ~ 2 文字)
Name,Description,Advertised Fallback Directory E.164 Number, Fallback Qos Sensitivity Level, Fallback Call CSS, Fallback Call Answer Timer, Fallback Directory Number Partition, Fallback Directory Number, Number of Digits for Caller Id Partial Match
profile1,sample_file,+91233232,1,Trunk Reroute Calling Search Space,2,partition1,1212,1
エンド ユーザ CAPF プロファイルを挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | 追加する各エンド ユーザ CAPF プロファイルの値を、プロファイルごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
次のサンプル形式と例に、エンド ユーザ CAPF プロファイル用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Instance ID(必須、1 ~ 132 文字), End User ID(必須、1 ~ 128 文字), Certificate Operation(必須、1 ~ 100 文字), Authentication Mode(必須、1 ~ 100 文字), Authentication String(オプション、1 ~ 50 文字), Key Size(必須、1 ~ 4 文字), Operation Completes By(必須、1 ~ 15 文字)
Instance ID,End User ID,Certificate Operation,Authentication Mode,Authentication String,Key Size,Operation Completes By
11,user,No Pending Operation,By Existing Certificate (precedence to LSC),1234567,512,2010:1:21:12
モビリティ プロファイルを挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注) |
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。 |
ステップ 1 | テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 |
ステップ 2 | 追加する各モビリティ プロファイルの値を、プロファイルごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 |
ステップ 3 | CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。 |
CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
次のサンプル形式と例に、モビリティ プロファイル用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Mobility Profile Name(必須、1 ~ 50 文字), Description(オプション、1 ~ 128 文字), Service Access Number(オプション、1 ~ 50 文字), Enterprise Feature Access Number/Partition(オプション、1 ~ 50 文字), Callback Caller ID(オプション、1 ~ 50 文字), Mobile Client Calling Option(必須、1 ~ 50 文字)
Mobility Profile Name,Description,Service Access Number,Enterprise Feature Access Number/Partition,Callback Caller Id,Mobile Client Calling Option
MoProfile1,testexport,2323,123456 in part1,33,Dial via Office Reverse
目次
- テキストベースの CSV ファイル
- 電話機用のテキストベース CSV ファイルの作成
- 電話機用 CSV データ ファイル形式
- 電話機とユーザの組み合わせのファイル形式
- CTI ポート/H.323 クライアントのファイル形式
- CTI ポートとユーザの組み合わせ、および H.323 クライアントとユーザの組み合わせのファイル形式
- 電話機のすべての詳細オプションのフィールドのエクスポート
- 電話機 CSV ファイルの例
- ユーザ用のテキストベース CSV ファイルの作成
- ユーザ用ファイル形式
- ユーザ用ファイル形式の更新
- ユーザ デバイス プロファイル用のテキストベース CSV ファイルの作成
- ユーザ デバイス プロファイルのファイル形式
- 2 つの回線と 2 つのスピード ダイヤルを持つユーザ デバイス プロファイル
- すべての詳細オプションを使用するユーザ デバイス プロファイルのエクスポート ファイルのフィールド
- Cisco Unified CM Assistant マネージャとアシスタントのアソシエーション用のテキストベース CSV ファイルの作成
- マネージャとアシスタントのファイル形式
- デフォルトのマネージャとアシスタントのアソシエーション
- デフォルトのアシスタントとマネージャのアソシエーション
- カスタムのマネージャとアシスタントのアソシエーション
- Cisco VG200 ゲートウェイ用のテキストベース CSV ファイルの作成
- FXO トランクまたは FXS トランクの CSV ファイル形式
- T1 CAS トランク、T1 PRI トランク、または E1 PRI トランクのファイル形式
- Cisco VG224 ゲートウェイ用のテキストベース CSV ファイルの作成
- VG224 用の FXS トランク CSV ファイル形式
- Cisco Catalyst 6000 FXS ポート用のテキストベース CSV ファイルの作成
- Cisco Catalyst 6000(FXS)ポートのファイル形式
- Cisco VG202 および VG204 ゲートウェイ用のテキストベース CSV ファイルの作成
- VG202 および VG204 ゲートウェイ用の CSV ファイル形式
- クライアント識別コードと強制承認コードのテキストベースのカスタム CSV ファイルの作成
- CMC 用ファイル形式
- CMC 用ファイル形式の更新
- FAC 用ファイル形式
- FAC 用ファイル形式の更新
- コール ピックアップ グループ用のテキストベース CSV ファイルの作成
- CPG 用ファイル形式
- CPG 用ファイル形式の更新
- リモート接続先プロファイル用のテキストベース CSV ファイルの作成
- 電話の移行用のテキストベース CSV ファイルの作成
- 電話の移行のファイル形式
- IME 信頼要素設定用のテキストベース CSV ファイルの作成
- IME 信頼要素設定のファイル形式
- IME 信頼グループ設定用のテキストベース CSV ファイルの作成
- IME 信頼要素設定のファイル形式
- IME 登録済みグループ設定用のテキストベース CSV ファイルの作成
- IME 登録済みグループ設定のファイル形式
- IME 除外グループ設定用のテキストベース CSV ファイルの作成
- IME 除外グループ設定のファイル形式
- フォールバック プロファイル設定用のテキストベース CSV ファイルの作成
- フォールバック プロファイル設定のファイル形式
- エンド ユーザ CAPF プロファイル用のテキストベース CSV ファイルの作成
- エンド ユーザ CAPF プロファイルのファイル形式
- モビリティ プロファイル用のテキストベース CSV ファイルの作成
- モビリティ プロファイルのファイル形式
- 関連項目
Cisco Unified Communications Manager 一括管理(BAT)は、カンマ区切り値(CSV)ファイル形式で入力されたデータを使用して、最初のノード サーバ上の Cisco Unified Communications Manager データベースへの挿入トランザクションの情報を提供します。 CSV データ形式を使用すると、表形式のデータ レコードを含むテキスト ファイルを作成できます。
CSV データ ファイルを作成するには、Microsoft メモ帳などのテキスト エディタを使用します。 各レコードのデータは、別個の行で入力する必要があります。 各データ フィールドはカンマで区切り、ブランク フィールドにはカンマ区切り文字を指定します。 CSV ファイルにブランク行があると挿入トランザクション中にエラーが発生するので、データ ファイル内のすべての行にデータを入力します。
Cisco Unified Communications Manager データベースにデータ レコードを挿入する場合、BAT は最初のノード データベースを実行するサーバ上にある指定のフォルダ セットにアクセスします。 BAT がトランザクションの該当する CSV データ ファイルにアクセスできるようにするには、CSV データ ファイルを、 Cisco Unified Communications Manager の最初のノード データベース サーバにアップロードする必要があります。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
- 電話機用のテキストベース CSV ファイルの作成
- ユーザ用のテキストベース CSV ファイルの作成
- ユーザ用ファイル形式
- ユーザ デバイス プロファイル用のテキストベース CSV ファイルの作成
- Cisco Unified CM Assistant マネージャとアシスタントのアソシエーション用のテキストベース CSV ファイルの作成
- Cisco VG200 ゲートウェイ用のテキストベース CSV ファイルの作成
- Cisco VG224 ゲートウェイ用のテキストベース CSV ファイルの作成
- Cisco Catalyst 6000 FXS ポート用のテキストベース CSV ファイルの作成
- Cisco Catalyst 6000(FXS)ポートのファイル形式
- Cisco VG202 および VG204 ゲートウェイ用のテキストベース CSV ファイルの作成
- クライアント識別コードと強制承認コードのテキストベースのカスタム CSV ファイルの作成
- コール ピックアップ グループ用のテキストベース CSV ファイルの作成
- リモート接続先プロファイル用のテキストベース CSV ファイルの作成
- 電話の移行用のテキストベース CSV ファイルの作成
- IME 信頼要素設定用のテキストベース CSV ファイルの作成
- IME 信頼グループ設定用のテキストベース CSV ファイルの作成
- IME 登録済みグループ設定用のテキストベース CSV ファイルの作成
- IME 除外グループ設定用のテキストベース CSV ファイルの作成
- フォールバック プロファイル設定用のテキストベース CSV ファイルの作成
- エンド ユーザ CAPF プロファイル用のテキストベース CSV ファイルの作成
- モビリティ プロファイル用のテキストベース CSV ファイルの作成
- 関連項目
関連タスク
電話機用のテキストベース CSV ファイルの作成
手順Microsoft メモ帳などのテキスト エディタを使用して、電話機、IP テレフォニー デバイス、およびユーザの組み合わせの CSV テキスト ファイルを作成することができます。
電話機を追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 各種の電話機タイプに対応して、異なる CSV データ ファイル形式があります。 CSV テキスト ファイルには適切な電話機ファイル形式を使用する必要があります。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加する電話機、IP テレフォニー デバイス、またはユーザの組み合わせごとに、行を変えて値を入力します。 デバイスのタイプごとに別の CSV ファイルを作成する必要があります。 CSV データ ファイルを作成するときには、次の規則に注意してください。
- フィールドがブランクであっても、必ず、カンマ区切り文字を入力します。
- 電話機をユーザに関連付ける場合は、ユーザ ID を指定します。
- 回線が設定されていない BAT テンプレートで使用するために CSV ファイルを作成する場合にだけ、Directory Number フィールドをオプションにします。 BAT 電話テンプレートで回線が設定されている場合は、デバイスごとに CSV ファイルで電話番号を指定する必要があります。
- ブランク行のある CSV ファイルを挿入するとエラーが発生するので注意します。
- CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
電話機用 CSV データ ファイル形式
- 電話機とユーザの組み合わせのファイル形式
- CTI ポート/H.323 クライアントのファイル形式
- CTI ポートとユーザの組み合わせ、および H.323 クライアントとユーザの組み合わせのファイル形式
関連資料
電話機とユーザの組み合わせのファイル形式
次のサンプル形式に、電話機および固定ユーザの形式のテキストベース CSV ファイルのフィールド長、およびフィールドがオプションか必須かを示します。
First Name (Optional, up to 64 characters), Last Name (Mandatory, 1 to 64 characters), User ID (Mandatory, 1 to 128 characters), Password (Optional, up to 128 characters), Manager User ID (Optional, up to 128 characters, must use the ID that exists in global directory), Department (Optional, up to 64 characters), PIN (Optional, up to 20 numerals), Default Profile (Optional, up to 50 characters), User Locale (Optional, up to 50 characters), Telephone Number (Optional, up to 20 numerals), Primary Extension (Optional, up to 50 numerals), Associated PC (Optional, up to 50 characters), ICD Extension (Optional, up to 50 numerals), Mail ID (Optional, up to 255 characters), Presence Group (Optional, up to 50 characters), Subscribe Calling Search Space (Optional, up to 50 characters), MAC Address (Mandatory, up to 12 characters), Description (Optional, up to 50 characters), Location (Optional, up to 50 characters), Directory Number (Optional, up to 24 numerals and special characters), Display (Optional, up to 30 characters), Line Text Label (Optional, up to 30 characters), Forward Busy External (Optional, up to 50 numerals and special characters), Forward No Answer External (Optional, up to 50 numerals and special characters), Forward No Coverage External (Optional, up to 50 numerals and special characters), Forward Busy Internal (Optional, up to 50 numerals and special characters), Forward No Answer Internal (Optional, up to 50 numerals and special characters), Forward No Coverage Internal (Optional, up to 50 numerals and special characters), Call Pickup Group (Optional, up to 50 characters), Speed Dial (Optional, up to 50 numerals and special characters), Speed Dial Label (Optional, up to 30 characters)CTI ポート/H.323 クライアントのファイル形式
次のサンプル形式に、CTI ポートおよび H.323 クライアントの形式のテキストベース CSV ファイルのフィールド長、およびフィールドがオプションか必須かを示します。
Device Name (Mandatory, up to 15 characters for CTI ports and up to 50 characters for H.323 Clients), Description (Optional, up to 50 characters) Location (Optional, up to 50 characters),User ID(Optional, 1 to 30 characters),Directory Number(Optional, up to 24 numerals and special characters),Display (Optional, up to 30 characters), Line Text Label (Optional, up to 30 characters), Forward Busy External(Optional, up to 50 numerals and special characters),Forward No Answer External (Optional, up to 50 numerals and special characters), Forward No Coverage External (Optional, up to 50 numerals and special characters), Forward Busy Internal (Optional, up to 50 numerals and special characters), Forward No Answer Internal (Optional, up to 50 numerals and special characters), Forward No Coverage Internal (Optional, up to 50 numerals and special characters), Call Pickup Group (Optional, up to 50/50 characters)CTI ポートとユーザの組み合わせ、および H.323 クライアントとユーザの組み合わせのファイル形式
次のサンプル形式に、CTI ポートとユーザ、および H.323 クライアントとユーザの形式のテキストベース CSV ファイルのフィールド長、およびフィールドがオプションか必須かを示します。
First Name (Optional, up to 64 characters), Last Name (Mandatory, 1 to 64 characters), User ID (Mandatory, 1-128 characters), Password (Optional, up to 128 characters), Manager User ID (Optional, up to 128 characters, must use existing ID in global directory), Department (Optional, up to 64 characters), PIN (Optional, up to 128 numerals), Default Profile (Optional, up to 50 characters), User Locale (Optional, up to 50 characters), Telephone Number (Optional, up to 64 numerals), Primary Extension (Optional, up to 50 numerals), Associated PC (Optional, up to 50 characters), ICD Extension (Optional, up to 50 numerals), Mail ID (Optional, up to 255 characters), Presence Group (Optional, up to 50 characters), Subscribe Calling Search Space (Optional, up to 50 characters),Device Name (Mandatory, up to 15 characters for CTI ports-users combination and up to 50 characters for H.323client-users combinations),Description (Optional, up to 50 characters), Location (Optional, up to 50 characters), Directory Number (Optional, up to 24 numerals and special characters), Display (Optional, up to 30 characters), Line Text Label (Optional, up to 30 characters), Forward Busy External (Optional, up to 50 numerals and special characters), Forward No Answer External (Optional, up to 50 numerals and special characters), Forward No Coverage External (Optional, up to 50 numerals and special characters), Forward Busy Internal (Optional, up to 50 numerals and special characters), Forward No Answer Internal (Optional, up to 50 numerals and special characters), Forward No Coverage Internal (Optional, up to 50 numerals and special characters), Call Pickup Group (Optional, up to 50 characters)例
John,Smith,johns,abcde,Daviss,12,12345,johnProfile,English United States,1,TAPS Port 1,CTI TAPS Port 1,9725557154,9725557154,Mike,9725557172,9725557196,9725557112,9725557127,9725557158, 9725557189,9725557121/TollByPass,1230000000,Helpdesk
(注)
いずれかのフィールドの中で、カンマまたは二重引用符を値の一部として使用する場合は、テキスト値全体を二重引用符で囲んで、これを 1 つの値として指定する必要があります。
たとえば、John, Bill をテキスト値として入力する場合は、「"John,Bill"」と入力する必要があります。
値に二重引用符を入力する場合は、二重引用符を 2 つの連続した二重引用符に置き換え、その値全体を二重引用符で囲む必要があります。 たとえば、John "Chief は「"John""Chief"」と入力する必要があります。
電話機のすべての詳細オプションのフィールドのエクスポート
エクスポート ユーティリティを使用して電話機レコードのすべての詳細を含むファイルを生成する場合、エクスポート ファイルは次の形式にする必要があります。
注意
エクスポート ユーティリティで生成したファイルは、編集しないことをお勧めします。 Logout time や Login time などのフィールドはシステムが動的に生成するため、一切編集しないでください。 Login User ID フィールドと Product Specific XML フィールドは、適切に動作するには正確である必要があるので、編集しないでください。 製品固有の設定を更新するには、BAT を使用します。
Device Name,Description,Device Pool,Phone Template,CSS,AAR CSS,Location,Extension Mobility,Network Locale,Media Resource Group List,User Hold Audio Source,Network Hold Audio Source,Device User Locale,Signal Packet Capture Mode,Packet Capture Duration,Built in Bridge,Privacy,Retry Video Call as Audio,Ignore Presentation Indicators,Softkey Template,Module 1,Module 2,Phone Load Name,Module 1 Load Name,Module 2 Load Name,Information,Directory,Messages,Services,Authentication Server,Proxy Server,Idle,Idle Timer,MLPP Indication,MLPP Preemption,MLPP Domain,Device Type,User ID,Common Profile,Owner User ID,Allow CTI Control Flag,Device Presence Group,Security Profile,Device Subscribe CSS,Unattended Port,Require DTMF Reception,RFC2833 Disabled,Certificate Operation,Authentication String,Certification Operation Completion Time,Device Protocol,Secure Shell User,Secure Shell Password,XML,Dial Rules,CSS Reroute,CSS Refer,DTMF Signalling,Default DTMF Capability,SIP Profile,SIPCodec_MTPPreferredOrigCodec,Logout Profile,MTP Required,Digest User,Always Use Prime Line,Always Use Prime Line for Voice Messages,Geo LocationDirectory Number,Partition,Voice Mail Profile,Line CSS,AAR Group,Line User Hold Audio Source,Line Network Hold Audio Source,Auto Answer,Forward All Voice Mail,Forward All Destination,Forward All CSS,Forward Busy Internal Voice Mail,Forward Busy Internal Destination,Forward Busy Internal CSS,Forward Busy External Voice Mail,Forward Busy External Destination,Forward Busy External CSS,Forward No Answer Internal Voice Mail,Forward No Answer Internal Destination,Forward No Answer Internal CSS,Forward No Answer External Voice Mail,Forward No Answer External Destination,Forward No Answer External CSS,Forward No Coverage Internal Voice Mail,Forward No Coverage Internal Destination,Forward No Coverage Internal CSS,Forward No Coverage External Voice Mail,Forward No Coverage External Destination,Forward No Coverage External CSS,Forward No Answer Ring Duration,Call Pickup Group,MLPP Target,MLPP CSS,MLPP No Answer Ring Duration,Line Text Label,External Phone Number Mask,Maximum Number of Calls,Busy Trigger,Message Waiting Lamp Policy,Ring setting (Phone Idle),Ring Setting (Phone Active),Caller Name,Caller Number,Redirected Number,Dialed Number,Line Description,Alerting Name,Alerting Name ASCII,Line Presence Group,Secondary CSS for Forward All,Forward on CTI Failure Voice Mail,Forward on CTI Failure Destination,Forward on CTI Failure CSS,Display,ASCII DisplayParty Entrance Tone,Log Missed Calls,Park Monitor Forward No Retrieve Ext Voice Mail,Park Monitor Forward No Retrieve Int Voice Mail,Park Monitor Forward No Retrieve Ext CSS,Park Monitor Forward No Retrieve Int CSS,Park Monitor Forward No Retrieve Ext Destination,Park Monitor Forward No Retrieve Int Destination,Park Monitor Reversion Timer電話機 CSV ファイルの例
テンプレート属性:Forward Busy Destination の使用
電話テンプレートで Forward Busy Destination が 3001 の場合、CSV ファイル内で Forward Busy Destination に値の指定がないすべてのレコードは、3001 を使用します。
1231123245AB,SEP1231123245AB,Dallas,johns,9728437154,9728437154,Mike,,9728437196,9728437127, 9728437154,9728437178,9728437189,9728437121/TollByPass,1230000000,Helpdesk電話機の説明を入力しない
1231123245AB,,Dallas,johns,9728437154,9728437154,Mike,9728437172,9728437196, 9728437127,9728437154,9728437178,9728437189,9728437121/TollByPass,1230000000,Helpdeskアクティブな回線またはロケーションを入力しない
アクティブな回線が不要で、ロケーションもブランクの場合は、次の形式で指定します。
1231123245AB,SEP1231123245AB,,,1230000000,HelpDesk2 回線のアクティブ回線
アクティブな回線が 2 回線必要な場合は、次の形式で指定します。
1231123245AB,SEP1231123245AB,Dallas,johns,9725557154,9725557154,Mike,9725557172,9725557196, 9728437127,9728437154,9728437178,9728437189,9725557121/TollByPass,9725557155,9725557155, Kelvin,9725557133,9725557196,9728437112,9728437145,9728437187,9728437198,9725557112/ TollByPass,1230000000,Helpdesk
(注)
MAC Address については、MAC アドレス値を入力するか、ダミー MAC アドレスの作成オプションのチェックボックスをオンにしてください。
ユーザ用のテキストベース CSV ファイルの作成
手順Microsoft メモ帳などのテキスト エディタを使用して、ユーザ用の CSV テキスト ファイルを作成することができます。
ユーザを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 ユーザ用の CSV テキスト ファイルにはユーザ ファイル形式を使用する必要があります。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加するユーザごとに、行を変えて値を入力します。 すべてのデバイスのデバイス名をカンマで区切って、レコードの終わりに入力すると、任意の数の既存デバイスを新しいユーザに関連付けることができます。
デバイスを制御しないユーザに対しても、電話番号を関連付けることができます。
(注) CSV ファイル内にブランク行があると、エラーが発生します。
ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
関連資料
ユーザ用ファイル形式
ヒント
暗証番号とパスワードの値は、CSV ファイル上に指定するか、BAT を使用してファイルを挿入するときに指定する必要があります。 ユーザまたはユーザのグループごとに個別の暗証番号またはパスワードを適用する場合は、CSV ファイルに暗証番号とパスワードを指定してください。 すべてのユーザが使用できるデフォルトの暗証番号とパスワードを使用する場合は、CSV ファイルに暗証番号またはパスワードの値を指定するのではなく、BAT を使用して CSV ファイルを Cisco Unified Communications Manager に挿入するときに指定してください。
次のサンプル形式と例に、ユーザ用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
First Name (Optional, up to 64 characters), Last Name (Mandatory, 1 to 64 characters), User ID(Mandatory, up to 128 characters), Manager User ID (Optional, up to 128 characters, must use existing ID in global directory), Department (Optional, up to 64 characters), PIN (Optional, up to 128 numerals), Default Profile (Optional, up to 50 characters), User Locale (Optional, up to 50 characters), Telephone Number (Optional, up to 64 numerals), Primary Extension (Optional, up to 50 numerals), Associated PC (Optional, up to 50 characters), ICD Extension (Optional, up to 50 numerals), Mail ID (Optional, up to 255 characters), Presence Group (Optional, up to 50 characters), Subscribe Calling Search Space (Optional, up to 50 characters).例
John,Smith,johns,abc123de,karend,0012055,9989,johns profile,English United States,SEP1231123245AB,9725557154,SEP0010EB001234フィールドがブランクであっても、区切り文字を指定する必要があります。 CSV ファイルの作成時には、次の例とサンプル CSV レコードを参照してください。
例 1
ユーザのマネージャがブランクである場合は、次の形式で指定します。
John,Smith,johns,abc123de,,0012055,9989,johns profile,English United States,SEP1231123245AB,9725557154,SEP0010EB001234例 4
ユーザは、複数のデバイスを制御できます。 追加デバイスのデバイス名を、レコードの終わりに追加できます。
ユーザが 1 台のデバイスだけを制御する場合は、次の形式で指定します。
John,Smith,johns,abc123de,karend,0012055,9989,johns profile,English United States,SEP1231123245AB,9725557154ユーザが 3 台のデバイスを制御する場合は、次の形式で指定します。
John,Smith,johns,abc123de,karend,0012055,9989,johns profile,English UnitedStates,SEP1231123245AB,9725557154,SEP0010EB001234,SEP0010EB432101ユーザ用ファイル形式の更新
ユーザ更新用の CSV テキスト ファイルを作成するには、テキスト エディタを使用します。 ファイルを最初のノード サーバにアップロードします。
レコードを更新する場合は、ファイルのすべての必須フィールドを指定する必要があります。 すでに値を格納しているにもかかわらず、オプション フィールドをブランクにしてレコードを更新すると、その値はブランクにリセットされます。 更新時に、すでに格納されている値を保持することができます。
次のサンプル形式に、ユーザ更新用のフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
User ID (Mandatory, 1 to 128 characters), Password (Optional, up to 128 characters), Manager (Optional, up to 128 characters, must use existing ID in global directory), Department (Optional, up to 64 characters), PIN (Optional, up to 128 numerals), Default Profile (Optional, up to 50 characters), User Locale (Optional, up to 50 characters), Telephone Number (Optional, up to 64 numerals), Primary Extension (Optional, up to 50 numerals), Associated PC (Optional, up to 50 characters), ICD Extension (Optional, up to 50 numerals), Mail ID (Optional, up to 255 characters).例
johns,Daviss,123,johnProfile,English United States,SEP8612113425AC,9725557154
(注)
フィールドがブランクであっても、区切り文字を指定する必要があります。 CSV ファイルの作成時には、次の例とサンプル CSV レコードを参照してください。
ユーザ デバイス プロファイル用のテキストベース CSV ファイルの作成
手順Microsoft メモ帳などのテキスト エディタを使用して、ユーザ デバイス プロファイル用の CSV テキスト ファイルを作成することができます。
ユーザ デバイス プロファイルを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 CSV テキスト ファイルにはユーザ デバイス プロファイルのファイル形式を使用する必要があります。
(注)
いずれかのフィールドの中で、カンマまたは二重引用符を文字列として使用する場合は、テキスト全体を二重引用符で囲む必要があります。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加するユーザ デバイス プロファイルの値を、プロファイルごとに行を変えて入力します。
(注) CSV ファイル内にブランク行があると、エラーが発生します。
ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
ユーザ デバイス プロファイルのファイル形式
次のサンプル形式に、ユーザ デバイス プロファイル用のフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
Device Profile Name(Mandatory, 1 to 50 characters),Description(Optional, 1 to 50 characters),Login UserID (Optional, 4 to 30 characters),Directory Number(Optional, up to 24 numerals and special characters),Display(Optional, for internal Caller ID, up to 30 characters),Line Text Label(Optional, up to 30 characters),Forward Busy External Destination(Optional, up to 50 numerals),Forward No Answer External Destination(Optional, up to 50 numerals),Forward No Coverage External(Optional, up to 50 numerals),Forward Busy Internal Destination(Optional, up to 50 numerals),Forward No Answer Internal Destination(Optional, up to 50 numerals),Forward No Coverage Internal(Optional, up to 50 numerals),Call Pickup Group(Optional, up to 50/50 characters),Speed Dial Number(Optional, up to 50 numerals),Speed Dial Label(optional, up to 30 characters)例
John Profile,John's Profile,Johns,9725557154,9725557154,Mike,9725557172,9725557196, 9725557126,9725557154,9725557178,9725557189,9725557121/TollByPass,1230000000,Helpdesk2 つの回線と 2 つのスピード ダイヤルを持つユーザ デバイス プロファイル
次のサンプル形式に、2 つの回線を持つユーザ デバイス プロファイル用の CSV ファイルのフィールド長と文字列タイプを示します。
User Device Profile Name(Mandatory, 1 to 50 characters),Description(Optional, 1 to 50 characters),Login UserID (Optional, 4 to 30 characters),Directory Number1(Optional, up to 24 numerals and special characters),Display1(Optional, for internal Caller ID, up to 30 characters),Line Text Label1(Optional, up to 30 characters),Forward Busy External Destination1(Optional, up to 50 numerals),Forward No Answer External Destination1(Optional, up to 50 numerals),Forward No Coverage External Destination1(Optional, up to 50 numerals),Forward Busy Intermal Destination1(Optional, up to 50 numerals),Forward No Answer Internal Destination1(Optional, up to 50 numerals),Forward No Coverage Internal Destination1(Optional, up to 50 numerals),Call Pickup Group1(Optional, up to 50/50 characters),Directory Number2(Optional, up to 24 numerals and special characters),Display2(Optional, for internal Caller ID, up to 30 characters),Line Text Label2(Optional, up to 30 characters),Forward Busy External Destination2(Optional, up to 50 numerals),Forward No Answer External Destination2(Optional, up to 50 numerals),Forward No Coverage External Destination2(Optional, up to 50 numerals),Forward Busy Intermal Destination2(Optional, up to 50 numerals),Forward No Answer Internal Destination2(Optional, up to 50 numerals),Forward No Coverage Internal Destination2(Optional, up to 50 numerals),Call Pickup Group2(Optional, up to 50/50 characters),Speed Dial Number1(Optional, up to 50 numerals),Speed Dial Label1(optional, up to 30 characters),Speed Dial Number2(Optional, up to 50 numerals),Speed Dial Label2(optional, up to 30 characters)例
John Profile,John's Profile,John’s,9725557154,9725557154,Mike,9725557172,9725557196,9725557126,9725557154, 9725557178,9725557189,9725557121/TollByPass,9725557155,9725557155,Kelvin,9725557133,9725557196, 9725557113,9725557145,9725557187,9725557198,9725557112/TollByPass,1230000000,Helpdesk, 2149523460,Keithすべての詳細オプションを使用するユーザ デバイス プロファイルのエクスポート ファイルのフィールド
エクスポート ユーティリティを使用してユーザ デバイス プロファイルのすべての詳細を含むファイルを生成する場合、エクスポート ファイルは次の形式になります。 次の例で、すべての詳細エクスポート ファイル内のフィールドの長さおよびタイプを示します。
エクスポート ユーティリティは、ユーザ デバイス プロファイルのモデル固有フィールドは生成しません。
注意
エクスポート ユーティリティで生成したファイルは、編集しないことをお勧めします。 Logout time や Login time などの一部のフィールドはシステムが動的に生成するため、一切編集しないでください。 Login User ID フィールドと Product Specific XML フィールドは、適切に動作するには正確である必要があるので、編集しないでください。 製品固有の設定を更新するには、BAT を使用します。
Device Profile Name,Description,Device Pool,Phone Template,CSS,AAR CSS,Location,Extension Mobility,Network Locale,Media Resource Group List,User Hold Audio Source,Network Hold Audio Source,Device User Locale,Signal Packet Capture Mode,Packet Capture Duration,Built in Bridge,Privacy,Retry Video Call as Audio,Ignore Presentation Indicators,Softkey Template,Module 1,Module 2,Phone Load Name,Module 1 Load Name,Module 2 Load Name,Information,Directory,Messages,Services,Authentication Server,Proxy Server,Idle,Idle Timer,MLPP Indication,MLPP Preemption,MLPP Domain,Device Type,User ID,Common Profile,Owner User ID,Allow CTI Control Flag,Device Presence Group,Security Profile,Device Subscribe CSS,Unattended Port,Require DTMF Reception,RFC2833 Disabled,Certificate Operation,Authentication String,Certification Operation Completion Time,Device Protocol,Secure Shell User,Secure Shell Password,XML,Dial Rules,CSS Reroute,CSS Refer,DTMF Signalling,Default DTMF Capability,SIP Profile,SIPCodec_MTPPreferredOrigCodec,Logout Profile,MTP Required,Digest User,Always Use Prime Line,Always Use Prime Line for Voice MessageDirectory Number,Partition,Voice Mail Profile,Line CSS,AAR Group,Line User Hold Audio Source,Line Network Hold Audio Source,Auto Answer,Forward All Voice Mail,Forward All Destination,Forward All CSS,Forward Busy Internal Voice Mail,Forward Busy Internal Destination,Forward Busy Internal CSS,Forward Busy External Voice Mail,Forward Busy External Destination,Forward Busy External CSS,Forward No Answer Internal Voice Mail,Forward No Answer Internal Destination,Forward No Answer Internal CSS,Forward No Answer External Voice Mail,Forward No Answer External Destination,Forward No Answer External CSS,Forward No Coverage Internal Voice Mail,Forward No Coverage Internal Destination,Forward No Coverage Internal CSS,Forward No Coverage External Voice Mail,Forward No Coverage External Destination,Forward No Coverage External CSS,Forward No Answer Ring Duration,Call Pickup Group,MLPP Target,MLPP CSS,MLPP No Answer Ring Duration,Line Text Label,External Phone Number Mask,Maximum Number of Calls,Busy Trigger,Message Waiting Lamp Policy,Ring setting (Phone Idle),Ring Setting (Phone Active),Caller Name,Caller Number,Redirected Number,Dialed Number,Line Description,Alerting Name,Alerting Name ASCII,Line Presence Group,Secondary CSS for Forward All,Forward on CTI Failure Voice Mail,Forward on CTI Failure Destination,Forward on CTI Failure CSS,Display,ASCII Display,Party Entrance Tone,Log Missed Calls,Park Monitor Forward No Retrieve Ext Voice Mail,Park Monitor Forward No Retrieve Int Voice Mail,Park Monitor Forward No Retrieve Ext CSS,Park Monitor Forward No Retrieve Int CSS,Park Monitor Forward No Retrieve Ext Destination,Park Monitor Forward No Retrieve Int Destination,Park Monitor Reversion TimerSpeed Dial Number,Speed Dial Label,Speed Dial Label ASCII,Service Name,Subscribed Service Name,Subscribed Service Name ASCII,Parameter Name,Parameter Value,Busy Lamp Field Destination,Busy Lamp Field Directory Number,Busy Lamp Field Label,Busy Lamp Field Label ASCII
(注)
ブール値の設定には、True と False を使用します。
Cisco Unified CM Assistant マネージャとアシスタントのアソシエーション用のテキストベース CSV ファイルの作成
手順Microsoft メモ帳などのテキスト エディタを使用して、Unified CM Assistant マネージャとアシスタント用の CSV テキスト ファイルを作成することができます。
Unified CM Assistant マネージャとアシスタントを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 CSV テキスト ファイルにはマネージャとアシスタントのファイル形式を使用する必要があります。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加するマネージャとアシスタントのアソシエーションの値を、アソシエーションごとに行を変えて入力します。
(注) CSV ファイル内にブランク行があると、エラーが発生します。
マネージャとアシスタントのユーザ ID をカンマで区切ってレコードの末尾に入力すると、1 人のマネージャに複数のアシスタントを割り当てることができます。
ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
関連資料
カスタムのマネージャとアシスタントのアソシエーション
プロキシ回線設定の場合、アシスタント電話機にプロキシ回線を指定する CSV データファイルを次の形式で作成できます。
ManagerID (Mandatory, 1 to 30 characters),Device Name (Optional, 15 characters),Intercom DN (Optional, 1 to 24 characters),Assistant User ID (Mandatory, 1 to 30 characters),Device Name (Optional, 15 characters),Intercom DN (Optional, 1 to 24 characters),Proxy Line DN (Mandatory, 1to 24 characters),Manager Line DN (Mandatory, 1 to 24 characters)Cisco VG200 ゲートウェイ用のテキストベース CSV ファイルの作成
手順Microsoft メモ帳などのテキスト エディタを使用して、VG200 ゲートウェイ用の CSV テキスト ファイルを作成することができます。
Cisco VG200 ゲートウェイを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 トランクのタイプとゲートウェイのポートに適したファイル形式を使用する必要があります。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加する各ゲートウェイとポートの値を、ゲートウェイごとに行を変えて入力します。
(注) CSV ファイル内にブランク行があると、エラーが発生します。
ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
FXO トランクまたは FXS トランクの CSV ファイル形式
次のサンプル形式に、Cisco VG200 ゲートウェイ用の必要なフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
MGCP Domain Name(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters), Slot (Mandatory, up to 3 numerals), Subunit (Mandatory, up to 3 numerals), Port Number(Mandatory, up to 3 numerals), Port Description Optional, up to 50 characters),Port Directory Number(Optional, up to 24 numerals and special characters)関連情報
T1 CAS トランク、T1 PRI トランク、または E1 PRI トランクのファイル形式
両トランク オプションの例
MGCPTest,,001,001,001,,Cisco VG200 ゲートウェイの Description がブランクの場合は、次のオプションを使います。
MGCPTest,,001001,001,001,MGCP Port,ポート識別子の場合、最初の数字は 0 または 1(Sub-Unit 0 か Sub-Unit 1 のいずれかを示す)とし、その後にポート番号 01 ~ 24 を続けます。 許容値は 001 ~ 024 または 101 ~ 124 です。 Cisco VG200 ゲートウェイ テンプレートに 3 つのポート識別子がある場合は、このオプションを使用します。
MGCPTest,VG200 Lab Gateway,001,002,003関連情報
Cisco VG224 ゲートウェイ用のテキストベース CSV ファイルの作成
手順Microsoft メモ帳などのテキスト エディタを使用して、VG224 ゲートウェイ用の CSV テキスト ファイルを作成することができます。
Cisco VG224 ゲートウェイを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 トランクのタイプとゲートウェイのポートに適したファイル形式を使用する必要があります。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加する各ゲートウェイとポートの値を、ゲートウェイごとに行を変えて入力します。
(注) CSV ファイル内にブランク行があると、エラーが発生します。
ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
VG224 用の FXS トランク CSV ファイル形式
次のサンプル形式に、Cisco VG224 ゲートウェイ用の必要なフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
MGCP Domain Name(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters),Slot(Mandatory, up to 3 numerals), Subunit (Mandatory, up to 3 numerals), Port Number(Mandatory, up to 3 numerals), Port Description Optional, up to 50 characters),Port Directory Number(Optional, up to 24 numerals and special characters)関連情報
Cisco Catalyst 6000 FXS ポート用のテキストベース CSV ファイルの作成
手順Microsoft メモ帳などのテキスト エディタを使用して、Cisco Catalyst 6000 FXS ポート用の CSV テキスト ファイルを作成することができます。
Cisco Catalyst 6000 FXS ポートを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 ゲートウェイのタイプに適したファイル形式を使用する必要があります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加するポートごとに、行を変えて値を入力します。
(注) CSV ファイル内にブランク行があると、エラーが発生します。
ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
関連情報
Cisco Catalyst 6000(FXS)ポートのファイル形式
CSV ファイルには、各ポートの情報がレコードとして含まれています。 各レコードは、ポートの詳細を追加または更新する先のゲートウェイの MAC アドレス、およびそのゲートウェイ上のポート番号を指定します。
(注)
BAT は、Cisco Catalyst 6000 (FXS) ゲートウェイを追加しません。 既存のゲートウェイにポートを追加するか、ポートを更新するだけです。
MAC アドレスには、既存の Cisco Catalyst 6000 (FXS) ゲートウェイの MAC アドレス値を入力しないでください。 この MAC アドレスは、Gateway Name の末尾の 12 文字分で構成されています。
CSV ファイル上のレコードで Partition に値を指定しない場合、これらのフィールドには BAT テンプレートからの値が使用されます。
次のサンプル形式に、Catalyst 6000 (FXS) ポート用の必要なフィールド長と文字列タイプを示し、その後に CSV ファイルの例を示します。
関連情報
Cisco VG202 および VG204 ゲートウェイ用のテキストベース CSV ファイルの作成
手順Microsoft メモ帳などのテキスト エディタを使用して、VG202 または VG204 ゲートウェイ用の CSV テキスト ファイルを作成することができます。
Cisco VG202 および VG204 ゲートウェイを追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 ゲートウェイに適したファイル形式を使用する必要があります。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加する各ゲートウェイとポートの値を、ゲートウェイごとに行を変えて入力します。
(注) CSV ファイル内にブランク行があると、エラーが発生します。
ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
VG202 および VG204 ゲートウェイ用の CSV ファイル形式
次のサンプル形式と例に、VG202 および VG204 ゲートウェイ用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
VG202 および VG204 ゲートウェイ用の CSV ファイル形式には、プロトコルに応じて次の 2 種類があります。
MGCP ゲートウェイの場合
Domain Name(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters),Slot(Mandatory, up to 3 numerals),Subunit(Mandatory, up to 3 numerals),Port Number(Mandatory, up to 3 numerals),Port Description(Optional, up to 50 characters),Port Directory Number(Optional, up to 24 numerals and special characters).SCCP ゲートウェイの場合
Mac Address(Mandatory, 1 to 64 characters),Description(Optional, up to 100 characters),Slot(Mandatory, up to 3 numerals),Subunit(Mandatory, up to 3 numerals),Port Number(Mandatory, up to 3 numerals),Port Description(Optional, up to 50 characters),Port Directory Number(Optional, up to 24 numerals and special characters).SKIGW1111111111,test,0,0,0,sample,1000クライアント識別コードと強制承認コードのテキストベースのカスタム CSV ファイルの作成
手順
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 コードごとに個別の行を使用して、カスタムのクライアント識別コード(CMC)用 CSV ファイルまたは強制承認コード(FAC)用 CSV ファイルを作成します。手順は、次のとおりです。
ヒント 個別に 2 つの CSV ファイル(CMC 用と FAC 用の CSV ファイル)を作成する必要があることに注意してください。
ステップ 3 CMC 用 CSV ファイルを作成するために、該当する情報を入力します。ここで、x、y は次のフィールドを表します。 たとえば、「5555,Acme Toys」のように入力することができます。ここで、5555 は Client Matter Code(必須)、Acme Toys は Description にそれぞれ相当します。
ステップ 4 FAC 用 CSV ファイルを作成するために、該当する情報を入力します。ここで、x、y、z は次のフィールドを表します。
- x:Forced Authorization Code(すべての追加、更新、および削除の必須エントリ)
- y:Authorization Code Name(エントリの更新の場合はオプション)
- z:Authorization Level(エントリの更新の場合はオプション)
たとえば、「1234,John Smith,20」のように入力することができます。ここで、1234 は Forced Authorization Code、John Smith は Authorization Code Name、20 は Authorization Level にそれぞれ相当します。
注意 コードの更新と同時に新規コードを追加する場合は、必要な情報をすべて入力してください。 既存のレコードの任意の部分を変更できますが、認証に必要な強制承認コードやクライアント識別コードなどは必ず含める必要があります。 情報を削除したりブランクにしたりしても、その情報はデータベースから削除されません。データベース内の既存の値は、ブランクの値では上書きされませんが、前述の例にある値を Acme Toys, Inc. や John L. Smith などに更新すると上書きされます。
ステップ 5 CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
(注) UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 6 次のいずれかの手順を実行します。
(注) 同じ CSV ファイルに対して、挿入と更新の操作を同時に実行することはできません。 挿入用と更新用に別の CSV ファイルを作成する必要があります。
関連資料
関連情報
CMC 用ファイル形式の更新
関連情報
コール ピックアップ グループ用のテキストベース CSV ファイルの作成
手順
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 コール ピックアップ グループ名ごとに別個の行を使用します。
ステップ 2 Pickup Group Name, Pickup Group Number, Partition, Other Pickup Group Name-Member1... Other Pickup Group Name-Member10 の値を入力します。 たとえば、「Marketing,7815,Part1,Marketing,Managers,Training」のように入力します。ここで、Marketing は必須のピックアップ グループ名、7815 は必須のピックアップ グループ番号です。 Part1 はパーティション、Marketing、Managers、および Training はピックアップ グループ Marketing に関連するその他のピックアップ グループ名です。
注意 情報を削除したりブランクにしたりしても、その情報はデータベースから削除されません。データベース内の既存の値は、ブランクの値では上書きされませんが、前述の例にある値を Sales from Marketing などに更新すると上書きされます。
ステップ 3 CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
(注) UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 4 次のいずれかの手順を実行します。
関連資料
関連情報
CPG 用ファイル形式
関連情報
リモート接続先プロファイル用のテキストベース CSV ファイルの作成
手順リモート接続先プロファイル(RDP)を追加するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 Cisco Unified Communications Manager に追加する各 RDP の値を、RDP ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
関連タスク
電話の移行用のテキストベース CSV ファイルの作成
手順電話機を移行するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 移行する各電話機の値を、電話機ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
関連タスク
IME 信頼要素設定用のテキストベース CSV ファイルの作成
手順IME 信頼要素設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 追加する各 IME 信頼要素設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノード サーバにアップロードします。
関連タスク
IME 信頼グループ設定用のテキストベース CSV ファイルの作成
手順IME 信頼グループ設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 追加する各 IME 信頼グループ設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
関連タスク
IME 登録済みグループ設定用のテキストベース CSV ファイルの作成
手順IME 登録済みグループ設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 追加する各 IME 登録済みグループ設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
関連タスク
IME 除外グループ設定用のテキストベース CSV ファイルの作成
手順IME 除外グループ設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 追加する各 IME 除外グループ設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。 サーバへのファイルのアップロードを参照してください。
関連タスク
フォールバック プロファイル設定用のテキストベース CSV ファイルの作成
手順フォールバック プロファイル設定を挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 追加する各フォールバック プロファイル設定の値を、設定ごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
関連タスク
フォールバック プロファイル設定のファイル形式
次のサンプル形式と例に、フォールバック プロファイル設定用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Name(必須、1 ~ 50 文字), Description (オプション、1 ~ 128 文字), Advertised Fallback Directory E.164 Number(オプション、1 ~ 16 文字), Fallback Qos Sensitivity Level(必須、1 ~ 2 文字), Fallback Call CSS(必須、1 ~ 2 文字), Fallback Call Answer Timer(必須、1 ~ 2 文字), Fallback Directory Number Partition(必須、1 ~ 50 文字), Fallback Directory Number (必須、1 ~ 50 文字), Number of Digits for Caller Id Partial Match(必須、1 ~ 2 文字)
例
Name,Description,Advertised Fallback Directory E.164 Number, Fallback Qos Sensitivity Level, Fallback Call CSS, Fallback Call Answer Timer, Fallback Directory Number Partition, Fallback Directory Number, Number of Digits for Caller Id Partial Match
profile1,sample_file,+91233232,1,Trunk Reroute Calling Search Space,2,partition1,1212,1エンド ユーザ CAPF プロファイル用のテキストベース CSV ファイルの作成
手順エンド ユーザ CAPF プロファイルを挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 追加する各エンド ユーザ CAPF プロファイルの値を、プロファイルごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
関連タスク
エンド ユーザ CAPF プロファイルのファイル形式
次のサンプル形式と例に、エンド ユーザ CAPF プロファイル用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Instance ID(必須、1 ~ 132 文字), End User ID(必須、1 ~ 128 文字), Certificate Operation(必須、1 ~ 100 文字), Authentication Mode(必須、1 ~ 100 文字), Authentication String(オプション、1 ~ 50 文字), Key Size(必須、1 ~ 4 文字), Operation Completes By(必須、1 ~ 15 文字)
モビリティ プロファイル用のテキストベース CSV ファイルの作成
手順モビリティ プロファイルを挿入するときに、データ入力に BAT スプレッドシートを使用する代わりに、値をカンマで区切った ASCII テキスト行を使用してカンマ区切り値(CSV)ファイルを作成できます。 Microsoft メモ帳などのテキスト エディタを使用することができます。
(注)
UTF-8 形式で符号化したテキストベースの CSV ファイルのみをアップロードすることをお勧めします。この形式では、ASCII 文字以外の文字も保存できるためです。 UTF-8 以外の形式で保存されたテキストベースの CSV ファイルは、 Cisco Unified Communications Manager からダウンロードするときに文字化けすることがあります。
ステップ 1 テキスト エディタ、またはテキストベースの CSV ファイルをエクスポートまたは作成できるアプリケーションを開きます。 ステップ 2 追加する各モビリティ プロファイルの値を、プロファイルごとに行を変えて入力します。 CSV データ ファイルを作成するときには、次の規則に注意してください。 ステップ 3 CSV ファイルを保存するときに、「UTF-8」符号化ファイルとして保存します。 メモ帳では、[文字コード] ドロップダウンで「UTF-8」の符号化を選択できます。
次の作業CSV ファイルを Cisco Unified Communications Manager の最初のノードにアップロードします。
関連タスク
モビリティ プロファイルのファイル形式
次のサンプル形式と例に、モビリティ プロファイル用のテキストベース CSV ファイルのフィールド、フィールド長、およびフィールドがオプションか必須かを示します。
Mobility Profile Name(必須、1 ~ 50 文字), Description(オプション、1 ~ 128 文字), Service Access Number(オプション、1 ~ 50 文字), Enterprise Feature Access Number/Partition(オプション、1 ~ 50 文字), Callback Caller ID(オプション、1 ~ 50 文字), Mobile Client Calling Option(必須、1 ~ 50 文字)